Loading...
1/*
2 * (C) Copyright Linus Torvalds 1999
3 * (C) Copyright Johannes Erdfelt 1999-2001
4 * (C) Copyright Andreas Gal 1999
5 * (C) Copyright Gregory P. Smith 1999
6 * (C) Copyright Deti Fliegl 1999
7 * (C) Copyright Randy Dunlap 2000
8 * (C) Copyright David Brownell 2000-2002
9 *
10 * This program is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by the
12 * Free Software Foundation; either version 2 of the License, or (at your
13 * option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful, but
16 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
17 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
18 * for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software Foundation,
22 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 */
24
25#include <linux/module.h>
26#include <linux/version.h>
27#include <linux/kernel.h>
28#include <linux/slab.h>
29#include <linux/completion.h>
30#include <linux/utsname.h>
31#include <linux/mm.h>
32#include <asm/io.h>
33#include <linux/device.h>
34#include <linux/dma-mapping.h>
35#include <linux/mutex.h>
36#include <asm/irq.h>
37#include <asm/byteorder.h>
38#include <asm/unaligned.h>
39#include <linux/platform_device.h>
40#include <linux/workqueue.h>
41
42#include <linux/usb.h>
43#include <linux/usb/hcd.h>
44
45#include "usb.h"
46
47
48/*-------------------------------------------------------------------------*/
49
50/*
51 * USB Host Controller Driver framework
52 *
53 * Plugs into usbcore (usb_bus) and lets HCDs share code, minimizing
54 * HCD-specific behaviors/bugs.
55 *
56 * This does error checks, tracks devices and urbs, and delegates to a
57 * "hc_driver" only for code (and data) that really needs to know about
58 * hardware differences. That includes root hub registers, i/o queues,
59 * and so on ... but as little else as possible.
60 *
61 * Shared code includes most of the "root hub" code (these are emulated,
62 * though each HC's hardware works differently) and PCI glue, plus request
63 * tracking overhead. The HCD code should only block on spinlocks or on
64 * hardware handshaking; blocking on software events (such as other kernel
65 * threads releasing resources, or completing actions) is all generic.
66 *
67 * Happens the USB 2.0 spec says this would be invisible inside the "USBD",
68 * and includes mostly a "HCDI" (HCD Interface) along with some APIs used
69 * only by the hub driver ... and that neither should be seen or used by
70 * usb client device drivers.
71 *
72 * Contributors of ideas or unattributed patches include: David Brownell,
73 * Roman Weissgaerber, Rory Bolt, Greg Kroah-Hartman, ...
74 *
75 * HISTORY:
76 * 2002-02-21 Pull in most of the usb_bus support from usb.c; some
77 * associated cleanup. "usb_hcd" still != "usb_bus".
78 * 2001-12-12 Initial patch version for Linux 2.5.1 kernel.
79 */
80
81/*-------------------------------------------------------------------------*/
82
83/* Keep track of which host controller drivers are loaded */
84unsigned long usb_hcds_loaded;
85EXPORT_SYMBOL_GPL(usb_hcds_loaded);
86
87/* host controllers we manage */
88LIST_HEAD (usb_bus_list);
89EXPORT_SYMBOL_GPL (usb_bus_list);
90
91/* used when allocating bus numbers */
92#define USB_MAXBUS 64
93struct usb_busmap {
94 unsigned long busmap [USB_MAXBUS / (8*sizeof (unsigned long))];
95};
96static struct usb_busmap busmap;
97
98/* used when updating list of hcds */
99DEFINE_MUTEX(usb_bus_list_lock); /* exported only for usbfs */
100EXPORT_SYMBOL_GPL (usb_bus_list_lock);
101
102/* used for controlling access to virtual root hubs */
103static DEFINE_SPINLOCK(hcd_root_hub_lock);
104
105/* used when updating an endpoint's URB list */
106static DEFINE_SPINLOCK(hcd_urb_list_lock);
107
108/* used to protect against unlinking URBs after the device is gone */
109static DEFINE_SPINLOCK(hcd_urb_unlink_lock);
110
111/* wait queue for synchronous unlinks */
112DECLARE_WAIT_QUEUE_HEAD(usb_kill_urb_queue);
113
114static inline int is_root_hub(struct usb_device *udev)
115{
116 return (udev->parent == NULL);
117}
118
119/*-------------------------------------------------------------------------*/
120
121/*
122 * Sharable chunks of root hub code.
123 */
124
125/*-------------------------------------------------------------------------*/
126
127#define KERNEL_REL ((LINUX_VERSION_CODE >> 16) & 0x0ff)
128#define KERNEL_VER ((LINUX_VERSION_CODE >> 8) & 0x0ff)
129
130/* usb 3.0 root hub device descriptor */
131static const u8 usb3_rh_dev_descriptor[18] = {
132 0x12, /* __u8 bLength; */
133 0x01, /* __u8 bDescriptorType; Device */
134 0x00, 0x03, /* __le16 bcdUSB; v3.0 */
135
136 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
137 0x00, /* __u8 bDeviceSubClass; */
138 0x03, /* __u8 bDeviceProtocol; USB 3.0 hub */
139 0x09, /* __u8 bMaxPacketSize0; 2^9 = 512 Bytes */
140
141 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation */
142 0x03, 0x00, /* __le16 idProduct; device 0x0003 */
143 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
144
145 0x03, /* __u8 iManufacturer; */
146 0x02, /* __u8 iProduct; */
147 0x01, /* __u8 iSerialNumber; */
148 0x01 /* __u8 bNumConfigurations; */
149};
150
151/* usb 2.0 root hub device descriptor */
152static const u8 usb2_rh_dev_descriptor [18] = {
153 0x12, /* __u8 bLength; */
154 0x01, /* __u8 bDescriptorType; Device */
155 0x00, 0x02, /* __le16 bcdUSB; v2.0 */
156
157 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
158 0x00, /* __u8 bDeviceSubClass; */
159 0x00, /* __u8 bDeviceProtocol; [ usb 2.0 no TT ] */
160 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
161
162 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation */
163 0x02, 0x00, /* __le16 idProduct; device 0x0002 */
164 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
165
166 0x03, /* __u8 iManufacturer; */
167 0x02, /* __u8 iProduct; */
168 0x01, /* __u8 iSerialNumber; */
169 0x01 /* __u8 bNumConfigurations; */
170};
171
172/* no usb 2.0 root hub "device qualifier" descriptor: one speed only */
173
174/* usb 1.1 root hub device descriptor */
175static const u8 usb11_rh_dev_descriptor [18] = {
176 0x12, /* __u8 bLength; */
177 0x01, /* __u8 bDescriptorType; Device */
178 0x10, 0x01, /* __le16 bcdUSB; v1.1 */
179
180 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
181 0x00, /* __u8 bDeviceSubClass; */
182 0x00, /* __u8 bDeviceProtocol; [ low/full speeds only ] */
183 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
184
185 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation */
186 0x01, 0x00, /* __le16 idProduct; device 0x0001 */
187 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
188
189 0x03, /* __u8 iManufacturer; */
190 0x02, /* __u8 iProduct; */
191 0x01, /* __u8 iSerialNumber; */
192 0x01 /* __u8 bNumConfigurations; */
193};
194
195
196/*-------------------------------------------------------------------------*/
197
198/* Configuration descriptors for our root hubs */
199
200static const u8 fs_rh_config_descriptor [] = {
201
202 /* one configuration */
203 0x09, /* __u8 bLength; */
204 0x02, /* __u8 bDescriptorType; Configuration */
205 0x19, 0x00, /* __le16 wTotalLength; */
206 0x01, /* __u8 bNumInterfaces; (1) */
207 0x01, /* __u8 bConfigurationValue; */
208 0x00, /* __u8 iConfiguration; */
209 0xc0, /* __u8 bmAttributes;
210 Bit 7: must be set,
211 6: Self-powered,
212 5: Remote wakeup,
213 4..0: resvd */
214 0x00, /* __u8 MaxPower; */
215
216 /* USB 1.1:
217 * USB 2.0, single TT organization (mandatory):
218 * one interface, protocol 0
219 *
220 * USB 2.0, multiple TT organization (optional):
221 * two interfaces, protocols 1 (like single TT)
222 * and 2 (multiple TT mode) ... config is
223 * sometimes settable
224 * NOT IMPLEMENTED
225 */
226
227 /* one interface */
228 0x09, /* __u8 if_bLength; */
229 0x04, /* __u8 if_bDescriptorType; Interface */
230 0x00, /* __u8 if_bInterfaceNumber; */
231 0x00, /* __u8 if_bAlternateSetting; */
232 0x01, /* __u8 if_bNumEndpoints; */
233 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
234 0x00, /* __u8 if_bInterfaceSubClass; */
235 0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */
236 0x00, /* __u8 if_iInterface; */
237
238 /* one endpoint (status change endpoint) */
239 0x07, /* __u8 ep_bLength; */
240 0x05, /* __u8 ep_bDescriptorType; Endpoint */
241 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
242 0x03, /* __u8 ep_bmAttributes; Interrupt */
243 0x02, 0x00, /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */
244 0xff /* __u8 ep_bInterval; (255ms -- usb 2.0 spec) */
245};
246
247static const u8 hs_rh_config_descriptor [] = {
248
249 /* one configuration */
250 0x09, /* __u8 bLength; */
251 0x02, /* __u8 bDescriptorType; Configuration */
252 0x19, 0x00, /* __le16 wTotalLength; */
253 0x01, /* __u8 bNumInterfaces; (1) */
254 0x01, /* __u8 bConfigurationValue; */
255 0x00, /* __u8 iConfiguration; */
256 0xc0, /* __u8 bmAttributes;
257 Bit 7: must be set,
258 6: Self-powered,
259 5: Remote wakeup,
260 4..0: resvd */
261 0x00, /* __u8 MaxPower; */
262
263 /* USB 1.1:
264 * USB 2.0, single TT organization (mandatory):
265 * one interface, protocol 0
266 *
267 * USB 2.0, multiple TT organization (optional):
268 * two interfaces, protocols 1 (like single TT)
269 * and 2 (multiple TT mode) ... config is
270 * sometimes settable
271 * NOT IMPLEMENTED
272 */
273
274 /* one interface */
275 0x09, /* __u8 if_bLength; */
276 0x04, /* __u8 if_bDescriptorType; Interface */
277 0x00, /* __u8 if_bInterfaceNumber; */
278 0x00, /* __u8 if_bAlternateSetting; */
279 0x01, /* __u8 if_bNumEndpoints; */
280 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
281 0x00, /* __u8 if_bInterfaceSubClass; */
282 0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */
283 0x00, /* __u8 if_iInterface; */
284
285 /* one endpoint (status change endpoint) */
286 0x07, /* __u8 ep_bLength; */
287 0x05, /* __u8 ep_bDescriptorType; Endpoint */
288 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
289 0x03, /* __u8 ep_bmAttributes; Interrupt */
290 /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
291 * see hub.c:hub_configure() for details. */
292 (USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
293 0x0c /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */
294};
295
296static const u8 ss_rh_config_descriptor[] = {
297 /* one configuration */
298 0x09, /* __u8 bLength; */
299 0x02, /* __u8 bDescriptorType; Configuration */
300 0x1f, 0x00, /* __le16 wTotalLength; */
301 0x01, /* __u8 bNumInterfaces; (1) */
302 0x01, /* __u8 bConfigurationValue; */
303 0x00, /* __u8 iConfiguration; */
304 0xc0, /* __u8 bmAttributes;
305 Bit 7: must be set,
306 6: Self-powered,
307 5: Remote wakeup,
308 4..0: resvd */
309 0x00, /* __u8 MaxPower; */
310
311 /* one interface */
312 0x09, /* __u8 if_bLength; */
313 0x04, /* __u8 if_bDescriptorType; Interface */
314 0x00, /* __u8 if_bInterfaceNumber; */
315 0x00, /* __u8 if_bAlternateSetting; */
316 0x01, /* __u8 if_bNumEndpoints; */
317 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
318 0x00, /* __u8 if_bInterfaceSubClass; */
319 0x00, /* __u8 if_bInterfaceProtocol; */
320 0x00, /* __u8 if_iInterface; */
321
322 /* one endpoint (status change endpoint) */
323 0x07, /* __u8 ep_bLength; */
324 0x05, /* __u8 ep_bDescriptorType; Endpoint */
325 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
326 0x03, /* __u8 ep_bmAttributes; Interrupt */
327 /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
328 * see hub.c:hub_configure() for details. */
329 (USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
330 0x0c, /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */
331
332 /* one SuperSpeed endpoint companion descriptor */
333 0x06, /* __u8 ss_bLength */
334 0x30, /* __u8 ss_bDescriptorType; SuperSpeed EP Companion */
335 0x00, /* __u8 ss_bMaxBurst; allows 1 TX between ACKs */
336 0x00, /* __u8 ss_bmAttributes; 1 packet per service interval */
337 0x02, 0x00 /* __le16 ss_wBytesPerInterval; 15 bits for max 15 ports */
338};
339
340/* authorized_default behaviour:
341 * -1 is authorized for all devices except wireless (old behaviour)
342 * 0 is unauthorized for all devices
343 * 1 is authorized for all devices
344 */
345static int authorized_default = -1;
346module_param(authorized_default, int, S_IRUGO|S_IWUSR);
347MODULE_PARM_DESC(authorized_default,
348 "Default USB device authorization: 0 is not authorized, 1 is "
349 "authorized, -1 is authorized except for wireless USB (default, "
350 "old behaviour");
351/*-------------------------------------------------------------------------*/
352
353/**
354 * ascii2desc() - Helper routine for producing UTF-16LE string descriptors
355 * @s: Null-terminated ASCII (actually ISO-8859-1) string
356 * @buf: Buffer for USB string descriptor (header + UTF-16LE)
357 * @len: Length (in bytes; may be odd) of descriptor buffer.
358 *
359 * The return value is the number of bytes filled in: 2 + 2*strlen(s) or
360 * buflen, whichever is less.
361 *
362 * USB String descriptors can contain at most 126 characters; input
363 * strings longer than that are truncated.
364 */
365static unsigned
366ascii2desc(char const *s, u8 *buf, unsigned len)
367{
368 unsigned n, t = 2 + 2*strlen(s);
369
370 if (t > 254)
371 t = 254; /* Longest possible UTF string descriptor */
372 if (len > t)
373 len = t;
374
375 t += USB_DT_STRING << 8; /* Now t is first 16 bits to store */
376
377 n = len;
378 while (n--) {
379 *buf++ = t;
380 if (!n--)
381 break;
382 *buf++ = t >> 8;
383 t = (unsigned char)*s++;
384 }
385 return len;
386}
387
388/**
389 * rh_string() - provides string descriptors for root hub
390 * @id: the string ID number (0: langids, 1: serial #, 2: product, 3: vendor)
391 * @hcd: the host controller for this root hub
392 * @data: buffer for output packet
393 * @len: length of the provided buffer
394 *
395 * Produces either a manufacturer, product or serial number string for the
396 * virtual root hub device.
397 * Returns the number of bytes filled in: the length of the descriptor or
398 * of the provided buffer, whichever is less.
399 */
400static unsigned
401rh_string(int id, struct usb_hcd const *hcd, u8 *data, unsigned len)
402{
403 char buf[100];
404 char const *s;
405 static char const langids[4] = {4, USB_DT_STRING, 0x09, 0x04};
406
407 // language ids
408 switch (id) {
409 case 0:
410 /* Array of LANGID codes (0x0409 is MSFT-speak for "en-us") */
411 /* See http://www.usb.org/developers/docs/USB_LANGIDs.pdf */
412 if (len > 4)
413 len = 4;
414 memcpy(data, langids, len);
415 return len;
416 case 1:
417 /* Serial number */
418 s = hcd->self.bus_name;
419 break;
420 case 2:
421 /* Product name */
422 s = hcd->product_desc;
423 break;
424 case 3:
425 /* Manufacturer */
426 snprintf (buf, sizeof buf, "%s %s %s", init_utsname()->sysname,
427 init_utsname()->release, hcd->driver->description);
428 s = buf;
429 break;
430 default:
431 /* Can't happen; caller guarantees it */
432 return 0;
433 }
434
435 return ascii2desc(s, data, len);
436}
437
438
439/* Root hub control transfers execute synchronously */
440static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
441{
442 struct usb_ctrlrequest *cmd;
443 u16 typeReq, wValue, wIndex, wLength;
444 u8 *ubuf = urb->transfer_buffer;
445 u8 tbuf [sizeof (struct usb_hub_descriptor)]
446 __attribute__((aligned(4)));
447 const u8 *bufp = tbuf;
448 unsigned len = 0;
449 int status;
450 u8 patch_wakeup = 0;
451 u8 patch_protocol = 0;
452
453 might_sleep();
454
455 spin_lock_irq(&hcd_root_hub_lock);
456 status = usb_hcd_link_urb_to_ep(hcd, urb);
457 spin_unlock_irq(&hcd_root_hub_lock);
458 if (status)
459 return status;
460 urb->hcpriv = hcd; /* Indicate it's queued */
461
462 cmd = (struct usb_ctrlrequest *) urb->setup_packet;
463 typeReq = (cmd->bRequestType << 8) | cmd->bRequest;
464 wValue = le16_to_cpu (cmd->wValue);
465 wIndex = le16_to_cpu (cmd->wIndex);
466 wLength = le16_to_cpu (cmd->wLength);
467
468 if (wLength > urb->transfer_buffer_length)
469 goto error;
470
471 urb->actual_length = 0;
472 switch (typeReq) {
473
474 /* DEVICE REQUESTS */
475
476 /* The root hub's remote wakeup enable bit is implemented using
477 * driver model wakeup flags. If this system supports wakeup
478 * through USB, userspace may change the default "allow wakeup"
479 * policy through sysfs or these calls.
480 *
481 * Most root hubs support wakeup from downstream devices, for
482 * runtime power management (disabling USB clocks and reducing
483 * VBUS power usage). However, not all of them do so; silicon,
484 * board, and BIOS bugs here are not uncommon, so these can't
485 * be treated quite like external hubs.
486 *
487 * Likewise, not all root hubs will pass wakeup events upstream,
488 * to wake up the whole system. So don't assume root hub and
489 * controller capabilities are identical.
490 */
491
492 case DeviceRequest | USB_REQ_GET_STATUS:
493 tbuf [0] = (device_may_wakeup(&hcd->self.root_hub->dev)
494 << USB_DEVICE_REMOTE_WAKEUP)
495 | (1 << USB_DEVICE_SELF_POWERED);
496 tbuf [1] = 0;
497 len = 2;
498 break;
499 case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
500 if (wValue == USB_DEVICE_REMOTE_WAKEUP)
501 device_set_wakeup_enable(&hcd->self.root_hub->dev, 0);
502 else
503 goto error;
504 break;
505 case DeviceOutRequest | USB_REQ_SET_FEATURE:
506 if (device_can_wakeup(&hcd->self.root_hub->dev)
507 && wValue == USB_DEVICE_REMOTE_WAKEUP)
508 device_set_wakeup_enable(&hcd->self.root_hub->dev, 1);
509 else
510 goto error;
511 break;
512 case DeviceRequest | USB_REQ_GET_CONFIGURATION:
513 tbuf [0] = 1;
514 len = 1;
515 /* FALLTHROUGH */
516 case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
517 break;
518 case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
519 switch (wValue & 0xff00) {
520 case USB_DT_DEVICE << 8:
521 switch (hcd->speed) {
522 case HCD_USB3:
523 bufp = usb3_rh_dev_descriptor;
524 break;
525 case HCD_USB2:
526 bufp = usb2_rh_dev_descriptor;
527 break;
528 case HCD_USB11:
529 bufp = usb11_rh_dev_descriptor;
530 break;
531 default:
532 goto error;
533 }
534 len = 18;
535 if (hcd->has_tt)
536 patch_protocol = 1;
537 break;
538 case USB_DT_CONFIG << 8:
539 switch (hcd->speed) {
540 case HCD_USB3:
541 bufp = ss_rh_config_descriptor;
542 len = sizeof ss_rh_config_descriptor;
543 break;
544 case HCD_USB2:
545 bufp = hs_rh_config_descriptor;
546 len = sizeof hs_rh_config_descriptor;
547 break;
548 case HCD_USB11:
549 bufp = fs_rh_config_descriptor;
550 len = sizeof fs_rh_config_descriptor;
551 break;
552 default:
553 goto error;
554 }
555 if (device_can_wakeup(&hcd->self.root_hub->dev))
556 patch_wakeup = 1;
557 break;
558 case USB_DT_STRING << 8:
559 if ((wValue & 0xff) < 4)
560 urb->actual_length = rh_string(wValue & 0xff,
561 hcd, ubuf, wLength);
562 else /* unsupported IDs --> "protocol stall" */
563 goto error;
564 break;
565 default:
566 goto error;
567 }
568 break;
569 case DeviceRequest | USB_REQ_GET_INTERFACE:
570 tbuf [0] = 0;
571 len = 1;
572 /* FALLTHROUGH */
573 case DeviceOutRequest | USB_REQ_SET_INTERFACE:
574 break;
575 case DeviceOutRequest | USB_REQ_SET_ADDRESS:
576 // wValue == urb->dev->devaddr
577 dev_dbg (hcd->self.controller, "root hub device address %d\n",
578 wValue);
579 break;
580
581 /* INTERFACE REQUESTS (no defined feature/status flags) */
582
583 /* ENDPOINT REQUESTS */
584
585 case EndpointRequest | USB_REQ_GET_STATUS:
586 // ENDPOINT_HALT flag
587 tbuf [0] = 0;
588 tbuf [1] = 0;
589 len = 2;
590 /* FALLTHROUGH */
591 case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
592 case EndpointOutRequest | USB_REQ_SET_FEATURE:
593 dev_dbg (hcd->self.controller, "no endpoint features yet\n");
594 break;
595
596 /* CLASS REQUESTS (and errors) */
597
598 default:
599 /* non-generic request */
600 switch (typeReq) {
601 case GetHubStatus:
602 case GetPortStatus:
603 len = 4;
604 break;
605 case GetHubDescriptor:
606 len = sizeof (struct usb_hub_descriptor);
607 break;
608 }
609 status = hcd->driver->hub_control (hcd,
610 typeReq, wValue, wIndex,
611 tbuf, wLength);
612 break;
613error:
614 /* "protocol stall" on error */
615 status = -EPIPE;
616 }
617
618 if (status) {
619 len = 0;
620 if (status != -EPIPE) {
621 dev_dbg (hcd->self.controller,
622 "CTRL: TypeReq=0x%x val=0x%x "
623 "idx=0x%x len=%d ==> %d\n",
624 typeReq, wValue, wIndex,
625 wLength, status);
626 }
627 }
628 if (len) {
629 if (urb->transfer_buffer_length < len)
630 len = urb->transfer_buffer_length;
631 urb->actual_length = len;
632 // always USB_DIR_IN, toward host
633 memcpy (ubuf, bufp, len);
634
635 /* report whether RH hardware supports remote wakeup */
636 if (patch_wakeup &&
637 len > offsetof (struct usb_config_descriptor,
638 bmAttributes))
639 ((struct usb_config_descriptor *)ubuf)->bmAttributes
640 |= USB_CONFIG_ATT_WAKEUP;
641
642 /* report whether RH hardware has an integrated TT */
643 if (patch_protocol &&
644 len > offsetof(struct usb_device_descriptor,
645 bDeviceProtocol))
646 ((struct usb_device_descriptor *) ubuf)->
647 bDeviceProtocol = 1;
648 }
649
650 /* any errors get returned through the urb completion */
651 spin_lock_irq(&hcd_root_hub_lock);
652 usb_hcd_unlink_urb_from_ep(hcd, urb);
653
654 /* This peculiar use of spinlocks echoes what real HC drivers do.
655 * Avoiding calls to local_irq_disable/enable makes the code
656 * RT-friendly.
657 */
658 spin_unlock(&hcd_root_hub_lock);
659 usb_hcd_giveback_urb(hcd, urb, status);
660 spin_lock(&hcd_root_hub_lock);
661
662 spin_unlock_irq(&hcd_root_hub_lock);
663 return 0;
664}
665
666/*-------------------------------------------------------------------------*/
667
668/*
669 * Root Hub interrupt transfers are polled using a timer if the
670 * driver requests it; otherwise the driver is responsible for
671 * calling usb_hcd_poll_rh_status() when an event occurs.
672 *
673 * Completions are called in_interrupt(), but they may or may not
674 * be in_irq().
675 */
676void usb_hcd_poll_rh_status(struct usb_hcd *hcd)
677{
678 struct urb *urb;
679 int length;
680 unsigned long flags;
681 char buffer[6]; /* Any root hubs with > 31 ports? */
682
683 if (unlikely(!hcd->rh_pollable))
684 return;
685 if (!hcd->uses_new_polling && !hcd->status_urb)
686 return;
687
688 length = hcd->driver->hub_status_data(hcd, buffer);
689 if (length > 0) {
690
691 /* try to complete the status urb */
692 spin_lock_irqsave(&hcd_root_hub_lock, flags);
693 urb = hcd->status_urb;
694 if (urb) {
695 clear_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);
696 hcd->status_urb = NULL;
697 urb->actual_length = length;
698 memcpy(urb->transfer_buffer, buffer, length);
699
700 usb_hcd_unlink_urb_from_ep(hcd, urb);
701 spin_unlock(&hcd_root_hub_lock);
702 usb_hcd_giveback_urb(hcd, urb, 0);
703 spin_lock(&hcd_root_hub_lock);
704 } else {
705 length = 0;
706 set_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);
707 }
708 spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
709 }
710
711 /* The USB 2.0 spec says 256 ms. This is close enough and won't
712 * exceed that limit if HZ is 100. The math is more clunky than
713 * maybe expected, this is to make sure that all timers for USB devices
714 * fire at the same time to give the CPU a break in between */
715 if (hcd->uses_new_polling ? HCD_POLL_RH(hcd) :
716 (length == 0 && hcd->status_urb != NULL))
717 mod_timer (&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
718}
719EXPORT_SYMBOL_GPL(usb_hcd_poll_rh_status);
720
721/* timer callback */
722static void rh_timer_func (unsigned long _hcd)
723{
724 usb_hcd_poll_rh_status((struct usb_hcd *) _hcd);
725}
726
727/*-------------------------------------------------------------------------*/
728
729static int rh_queue_status (struct usb_hcd *hcd, struct urb *urb)
730{
731 int retval;
732 unsigned long flags;
733 unsigned len = 1 + (urb->dev->maxchild / 8);
734
735 spin_lock_irqsave (&hcd_root_hub_lock, flags);
736 if (hcd->status_urb || urb->transfer_buffer_length < len) {
737 dev_dbg (hcd->self.controller, "not queuing rh status urb\n");
738 retval = -EINVAL;
739 goto done;
740 }
741
742 retval = usb_hcd_link_urb_to_ep(hcd, urb);
743 if (retval)
744 goto done;
745
746 hcd->status_urb = urb;
747 urb->hcpriv = hcd; /* indicate it's queued */
748 if (!hcd->uses_new_polling)
749 mod_timer(&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
750
751 /* If a status change has already occurred, report it ASAP */
752 else if (HCD_POLL_PENDING(hcd))
753 mod_timer(&hcd->rh_timer, jiffies);
754 retval = 0;
755 done:
756 spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
757 return retval;
758}
759
760static int rh_urb_enqueue (struct usb_hcd *hcd, struct urb *urb)
761{
762 if (usb_endpoint_xfer_int(&urb->ep->desc))
763 return rh_queue_status (hcd, urb);
764 if (usb_endpoint_xfer_control(&urb->ep->desc))
765 return rh_call_control (hcd, urb);
766 return -EINVAL;
767}
768
769/*-------------------------------------------------------------------------*/
770
771/* Unlinks of root-hub control URBs are legal, but they don't do anything
772 * since these URBs always execute synchronously.
773 */
774static int usb_rh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
775{
776 unsigned long flags;
777 int rc;
778
779 spin_lock_irqsave(&hcd_root_hub_lock, flags);
780 rc = usb_hcd_check_unlink_urb(hcd, urb, status);
781 if (rc)
782 goto done;
783
784 if (usb_endpoint_num(&urb->ep->desc) == 0) { /* Control URB */
785 ; /* Do nothing */
786
787 } else { /* Status URB */
788 if (!hcd->uses_new_polling)
789 del_timer (&hcd->rh_timer);
790 if (urb == hcd->status_urb) {
791 hcd->status_urb = NULL;
792 usb_hcd_unlink_urb_from_ep(hcd, urb);
793
794 spin_unlock(&hcd_root_hub_lock);
795 usb_hcd_giveback_urb(hcd, urb, status);
796 spin_lock(&hcd_root_hub_lock);
797 }
798 }
799 done:
800 spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
801 return rc;
802}
803
804
805
806/*
807 * Show & store the current value of authorized_default
808 */
809static ssize_t usb_host_authorized_default_show(struct device *dev,
810 struct device_attribute *attr,
811 char *buf)
812{
813 struct usb_device *rh_usb_dev = to_usb_device(dev);
814 struct usb_bus *usb_bus = rh_usb_dev->bus;
815 struct usb_hcd *usb_hcd;
816
817 if (usb_bus == NULL) /* FIXME: not sure if this case is possible */
818 return -ENODEV;
819 usb_hcd = bus_to_hcd(usb_bus);
820 return snprintf(buf, PAGE_SIZE, "%u\n", usb_hcd->authorized_default);
821}
822
823static ssize_t usb_host_authorized_default_store(struct device *dev,
824 struct device_attribute *attr,
825 const char *buf, size_t size)
826{
827 ssize_t result;
828 unsigned val;
829 struct usb_device *rh_usb_dev = to_usb_device(dev);
830 struct usb_bus *usb_bus = rh_usb_dev->bus;
831 struct usb_hcd *usb_hcd;
832
833 if (usb_bus == NULL) /* FIXME: not sure if this case is possible */
834 return -ENODEV;
835 usb_hcd = bus_to_hcd(usb_bus);
836 result = sscanf(buf, "%u\n", &val);
837 if (result == 1) {
838 usb_hcd->authorized_default = val? 1 : 0;
839 result = size;
840 }
841 else
842 result = -EINVAL;
843 return result;
844}
845
846static DEVICE_ATTR(authorized_default, 0644,
847 usb_host_authorized_default_show,
848 usb_host_authorized_default_store);
849
850
851/* Group all the USB bus attributes */
852static struct attribute *usb_bus_attrs[] = {
853 &dev_attr_authorized_default.attr,
854 NULL,
855};
856
857static struct attribute_group usb_bus_attr_group = {
858 .name = NULL, /* we want them in the same directory */
859 .attrs = usb_bus_attrs,
860};
861
862
863
864/*-------------------------------------------------------------------------*/
865
866/**
867 * usb_bus_init - shared initialization code
868 * @bus: the bus structure being initialized
869 *
870 * This code is used to initialize a usb_bus structure, memory for which is
871 * separately managed.
872 */
873static void usb_bus_init (struct usb_bus *bus)
874{
875 memset (&bus->devmap, 0, sizeof(struct usb_devmap));
876
877 bus->devnum_next = 1;
878
879 bus->root_hub = NULL;
880 bus->busnum = -1;
881 bus->bandwidth_allocated = 0;
882 bus->bandwidth_int_reqs = 0;
883 bus->bandwidth_isoc_reqs = 0;
884
885 INIT_LIST_HEAD (&bus->bus_list);
886}
887
888/*-------------------------------------------------------------------------*/
889
890/**
891 * usb_register_bus - registers the USB host controller with the usb core
892 * @bus: pointer to the bus to register
893 * Context: !in_interrupt()
894 *
895 * Assigns a bus number, and links the controller into usbcore data
896 * structures so that it can be seen by scanning the bus list.
897 */
898static int usb_register_bus(struct usb_bus *bus)
899{
900 int result = -E2BIG;
901 int busnum;
902
903 mutex_lock(&usb_bus_list_lock);
904 busnum = find_next_zero_bit (busmap.busmap, USB_MAXBUS, 1);
905 if (busnum >= USB_MAXBUS) {
906 printk (KERN_ERR "%s: too many buses\n", usbcore_name);
907 goto error_find_busnum;
908 }
909 set_bit (busnum, busmap.busmap);
910 bus->busnum = busnum;
911
912 /* Add it to the local list of buses */
913 list_add (&bus->bus_list, &usb_bus_list);
914 mutex_unlock(&usb_bus_list_lock);
915
916 usb_notify_add_bus(bus);
917
918 dev_info (bus->controller, "new USB bus registered, assigned bus "
919 "number %d\n", bus->busnum);
920 return 0;
921
922error_find_busnum:
923 mutex_unlock(&usb_bus_list_lock);
924 return result;
925}
926
927/**
928 * usb_deregister_bus - deregisters the USB host controller
929 * @bus: pointer to the bus to deregister
930 * Context: !in_interrupt()
931 *
932 * Recycles the bus number, and unlinks the controller from usbcore data
933 * structures so that it won't be seen by scanning the bus list.
934 */
935static void usb_deregister_bus (struct usb_bus *bus)
936{
937 dev_info (bus->controller, "USB bus %d deregistered\n", bus->busnum);
938
939 /*
940 * NOTE: make sure that all the devices are removed by the
941 * controller code, as well as having it call this when cleaning
942 * itself up
943 */
944 mutex_lock(&usb_bus_list_lock);
945 list_del (&bus->bus_list);
946 mutex_unlock(&usb_bus_list_lock);
947
948 usb_notify_remove_bus(bus);
949
950 clear_bit (bus->busnum, busmap.busmap);
951}
952
953/**
954 * register_root_hub - called by usb_add_hcd() to register a root hub
955 * @hcd: host controller for this root hub
956 *
957 * This function registers the root hub with the USB subsystem. It sets up
958 * the device properly in the device tree and then calls usb_new_device()
959 * to register the usb device. It also assigns the root hub's USB address
960 * (always 1).
961 */
962static int register_root_hub(struct usb_hcd *hcd)
963{
964 struct device *parent_dev = hcd->self.controller;
965 struct usb_device *usb_dev = hcd->self.root_hub;
966 const int devnum = 1;
967 int retval;
968
969 usb_dev->devnum = devnum;
970 usb_dev->bus->devnum_next = devnum + 1;
971 memset (&usb_dev->bus->devmap.devicemap, 0,
972 sizeof usb_dev->bus->devmap.devicemap);
973 set_bit (devnum, usb_dev->bus->devmap.devicemap);
974 usb_set_device_state(usb_dev, USB_STATE_ADDRESS);
975
976 mutex_lock(&usb_bus_list_lock);
977
978 usb_dev->ep0.desc.wMaxPacketSize = cpu_to_le16(64);
979 retval = usb_get_device_descriptor(usb_dev, USB_DT_DEVICE_SIZE);
980 if (retval != sizeof usb_dev->descriptor) {
981 mutex_unlock(&usb_bus_list_lock);
982 dev_dbg (parent_dev, "can't read %s device descriptor %d\n",
983 dev_name(&usb_dev->dev), retval);
984 return (retval < 0) ? retval : -EMSGSIZE;
985 }
986
987 retval = usb_new_device (usb_dev);
988 if (retval) {
989 dev_err (parent_dev, "can't register root hub for %s, %d\n",
990 dev_name(&usb_dev->dev), retval);
991 }
992 mutex_unlock(&usb_bus_list_lock);
993
994 if (retval == 0) {
995 spin_lock_irq (&hcd_root_hub_lock);
996 hcd->rh_registered = 1;
997 spin_unlock_irq (&hcd_root_hub_lock);
998
999 /* Did the HC die before the root hub was registered? */
1000 if (HCD_DEAD(hcd))
1001 usb_hc_died (hcd); /* This time clean up */
1002 }
1003
1004 return retval;
1005}
1006
1007
1008/*-------------------------------------------------------------------------*/
1009
1010/**
1011 * usb_calc_bus_time - approximate periodic transaction time in nanoseconds
1012 * @speed: from dev->speed; USB_SPEED_{LOW,FULL,HIGH}
1013 * @is_input: true iff the transaction sends data to the host
1014 * @isoc: true for isochronous transactions, false for interrupt ones
1015 * @bytecount: how many bytes in the transaction.
1016 *
1017 * Returns approximate bus time in nanoseconds for a periodic transaction.
1018 * See USB 2.0 spec section 5.11.3; only periodic transfers need to be
1019 * scheduled in software, this function is only used for such scheduling.
1020 */
1021long usb_calc_bus_time (int speed, int is_input, int isoc, int bytecount)
1022{
1023 unsigned long tmp;
1024
1025 switch (speed) {
1026 case USB_SPEED_LOW: /* INTR only */
1027 if (is_input) {
1028 tmp = (67667L * (31L + 10L * BitTime (bytecount))) / 1000L;
1029 return (64060L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp);
1030 } else {
1031 tmp = (66700L * (31L + 10L * BitTime (bytecount))) / 1000L;
1032 return (64107L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp);
1033 }
1034 case USB_SPEED_FULL: /* ISOC or INTR */
1035 if (isoc) {
1036 tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
1037 return (((is_input) ? 7268L : 6265L) + BW_HOST_DELAY + tmp);
1038 } else {
1039 tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
1040 return (9107L + BW_HOST_DELAY + tmp);
1041 }
1042 case USB_SPEED_HIGH: /* ISOC or INTR */
1043 // FIXME adjust for input vs output
1044 if (isoc)
1045 tmp = HS_NSECS_ISO (bytecount);
1046 else
1047 tmp = HS_NSECS (bytecount);
1048 return tmp;
1049 default:
1050 pr_debug ("%s: bogus device speed!\n", usbcore_name);
1051 return -1;
1052 }
1053}
1054EXPORT_SYMBOL_GPL(usb_calc_bus_time);
1055
1056
1057/*-------------------------------------------------------------------------*/
1058
1059/*
1060 * Generic HC operations.
1061 */
1062
1063/*-------------------------------------------------------------------------*/
1064
1065/**
1066 * usb_hcd_link_urb_to_ep - add an URB to its endpoint queue
1067 * @hcd: host controller to which @urb was submitted
1068 * @urb: URB being submitted
1069 *
1070 * Host controller drivers should call this routine in their enqueue()
1071 * method. The HCD's private spinlock must be held and interrupts must
1072 * be disabled. The actions carried out here are required for URB
1073 * submission, as well as for endpoint shutdown and for usb_kill_urb.
1074 *
1075 * Returns 0 for no error, otherwise a negative error code (in which case
1076 * the enqueue() method must fail). If no error occurs but enqueue() fails
1077 * anyway, it must call usb_hcd_unlink_urb_from_ep() before releasing
1078 * the private spinlock and returning.
1079 */
1080int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb)
1081{
1082 int rc = 0;
1083
1084 spin_lock(&hcd_urb_list_lock);
1085
1086 /* Check that the URB isn't being killed */
1087 if (unlikely(atomic_read(&urb->reject))) {
1088 rc = -EPERM;
1089 goto done;
1090 }
1091
1092 if (unlikely(!urb->ep->enabled)) {
1093 rc = -ENOENT;
1094 goto done;
1095 }
1096
1097 if (unlikely(!urb->dev->can_submit)) {
1098 rc = -EHOSTUNREACH;
1099 goto done;
1100 }
1101
1102 /*
1103 * Check the host controller's state and add the URB to the
1104 * endpoint's queue.
1105 */
1106 if (HCD_RH_RUNNING(hcd)) {
1107 urb->unlinked = 0;
1108 list_add_tail(&urb->urb_list, &urb->ep->urb_list);
1109 } else {
1110 rc = -ESHUTDOWN;
1111 goto done;
1112 }
1113 done:
1114 spin_unlock(&hcd_urb_list_lock);
1115 return rc;
1116}
1117EXPORT_SYMBOL_GPL(usb_hcd_link_urb_to_ep);
1118
1119/**
1120 * usb_hcd_check_unlink_urb - check whether an URB may be unlinked
1121 * @hcd: host controller to which @urb was submitted
1122 * @urb: URB being checked for unlinkability
1123 * @status: error code to store in @urb if the unlink succeeds
1124 *
1125 * Host controller drivers should call this routine in their dequeue()
1126 * method. The HCD's private spinlock must be held and interrupts must
1127 * be disabled. The actions carried out here are required for making
1128 * sure than an unlink is valid.
1129 *
1130 * Returns 0 for no error, otherwise a negative error code (in which case
1131 * the dequeue() method must fail). The possible error codes are:
1132 *
1133 * -EIDRM: @urb was not submitted or has already completed.
1134 * The completion function may not have been called yet.
1135 *
1136 * -EBUSY: @urb has already been unlinked.
1137 */
1138int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
1139 int status)
1140{
1141 struct list_head *tmp;
1142
1143 /* insist the urb is still queued */
1144 list_for_each(tmp, &urb->ep->urb_list) {
1145 if (tmp == &urb->urb_list)
1146 break;
1147 }
1148 if (tmp != &urb->urb_list)
1149 return -EIDRM;
1150
1151 /* Any status except -EINPROGRESS means something already started to
1152 * unlink this URB from the hardware. So there's no more work to do.
1153 */
1154 if (urb->unlinked)
1155 return -EBUSY;
1156 urb->unlinked = status;
1157
1158 /* IRQ setup can easily be broken so that USB controllers
1159 * never get completion IRQs ... maybe even the ones we need to
1160 * finish unlinking the initial failed usb_set_address()
1161 * or device descriptor fetch.
1162 */
1163 if (!HCD_SAW_IRQ(hcd) && !is_root_hub(urb->dev)) {
1164 dev_warn(hcd->self.controller, "Unlink after no-IRQ? "
1165 "Controller is probably using the wrong IRQ.\n");
1166 set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
1167 if (hcd->shared_hcd)
1168 set_bit(HCD_FLAG_SAW_IRQ, &hcd->shared_hcd->flags);
1169 }
1170
1171 return 0;
1172}
1173EXPORT_SYMBOL_GPL(usb_hcd_check_unlink_urb);
1174
1175/**
1176 * usb_hcd_unlink_urb_from_ep - remove an URB from its endpoint queue
1177 * @hcd: host controller to which @urb was submitted
1178 * @urb: URB being unlinked
1179 *
1180 * Host controller drivers should call this routine before calling
1181 * usb_hcd_giveback_urb(). The HCD's private spinlock must be held and
1182 * interrupts must be disabled. The actions carried out here are required
1183 * for URB completion.
1184 */
1185void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb)
1186{
1187 /* clear all state linking urb to this dev (and hcd) */
1188 spin_lock(&hcd_urb_list_lock);
1189 list_del_init(&urb->urb_list);
1190 spin_unlock(&hcd_urb_list_lock);
1191}
1192EXPORT_SYMBOL_GPL(usb_hcd_unlink_urb_from_ep);
1193
1194/*
1195 * Some usb host controllers can only perform dma using a small SRAM area.
1196 * The usb core itself is however optimized for host controllers that can dma
1197 * using regular system memory - like pci devices doing bus mastering.
1198 *
1199 * To support host controllers with limited dma capabilites we provide dma
1200 * bounce buffers. This feature can be enabled using the HCD_LOCAL_MEM flag.
1201 * For this to work properly the host controller code must first use the
1202 * function dma_declare_coherent_memory() to point out which memory area
1203 * that should be used for dma allocations.
1204 *
1205 * The HCD_LOCAL_MEM flag then tells the usb code to allocate all data for
1206 * dma using dma_alloc_coherent() which in turn allocates from the memory
1207 * area pointed out with dma_declare_coherent_memory().
1208 *
1209 * So, to summarize...
1210 *
1211 * - We need "local" memory, canonical example being
1212 * a small SRAM on a discrete controller being the
1213 * only memory that the controller can read ...
1214 * (a) "normal" kernel memory is no good, and
1215 * (b) there's not enough to share
1216 *
1217 * - The only *portable* hook for such stuff in the
1218 * DMA framework is dma_declare_coherent_memory()
1219 *
1220 * - So we use that, even though the primary requirement
1221 * is that the memory be "local" (hence addressible
1222 * by that device), not "coherent".
1223 *
1224 */
1225
1226static int hcd_alloc_coherent(struct usb_bus *bus,
1227 gfp_t mem_flags, dma_addr_t *dma_handle,
1228 void **vaddr_handle, size_t size,
1229 enum dma_data_direction dir)
1230{
1231 unsigned char *vaddr;
1232
1233 if (*vaddr_handle == NULL) {
1234 WARN_ON_ONCE(1);
1235 return -EFAULT;
1236 }
1237
1238 vaddr = hcd_buffer_alloc(bus, size + sizeof(vaddr),
1239 mem_flags, dma_handle);
1240 if (!vaddr)
1241 return -ENOMEM;
1242
1243 /*
1244 * Store the virtual address of the buffer at the end
1245 * of the allocated dma buffer. The size of the buffer
1246 * may be uneven so use unaligned functions instead
1247 * of just rounding up. It makes sense to optimize for
1248 * memory footprint over access speed since the amount
1249 * of memory available for dma may be limited.
1250 */
1251 put_unaligned((unsigned long)*vaddr_handle,
1252 (unsigned long *)(vaddr + size));
1253
1254 if (dir == DMA_TO_DEVICE)
1255 memcpy(vaddr, *vaddr_handle, size);
1256
1257 *vaddr_handle = vaddr;
1258 return 0;
1259}
1260
1261static void hcd_free_coherent(struct usb_bus *bus, dma_addr_t *dma_handle,
1262 void **vaddr_handle, size_t size,
1263 enum dma_data_direction dir)
1264{
1265 unsigned char *vaddr = *vaddr_handle;
1266
1267 vaddr = (void *)get_unaligned((unsigned long *)(vaddr + size));
1268
1269 if (dir == DMA_FROM_DEVICE)
1270 memcpy(vaddr, *vaddr_handle, size);
1271
1272 hcd_buffer_free(bus, size + sizeof(vaddr), *vaddr_handle, *dma_handle);
1273
1274 *vaddr_handle = vaddr;
1275 *dma_handle = 0;
1276}
1277
1278void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *hcd, struct urb *urb)
1279{
1280 if (urb->transfer_flags & URB_SETUP_MAP_SINGLE)
1281 dma_unmap_single(hcd->self.controller,
1282 urb->setup_dma,
1283 sizeof(struct usb_ctrlrequest),
1284 DMA_TO_DEVICE);
1285 else if (urb->transfer_flags & URB_SETUP_MAP_LOCAL)
1286 hcd_free_coherent(urb->dev->bus,
1287 &urb->setup_dma,
1288 (void **) &urb->setup_packet,
1289 sizeof(struct usb_ctrlrequest),
1290 DMA_TO_DEVICE);
1291
1292 /* Make it safe to call this routine more than once */
1293 urb->transfer_flags &= ~(URB_SETUP_MAP_SINGLE | URB_SETUP_MAP_LOCAL);
1294}
1295EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_setup_for_dma);
1296
1297static void unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
1298{
1299 if (hcd->driver->unmap_urb_for_dma)
1300 hcd->driver->unmap_urb_for_dma(hcd, urb);
1301 else
1302 usb_hcd_unmap_urb_for_dma(hcd, urb);
1303}
1304
1305void usb_hcd_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
1306{
1307 enum dma_data_direction dir;
1308
1309 usb_hcd_unmap_urb_setup_for_dma(hcd, urb);
1310
1311 dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
1312 if (urb->transfer_flags & URB_DMA_MAP_SG)
1313 dma_unmap_sg(hcd->self.controller,
1314 urb->sg,
1315 urb->num_sgs,
1316 dir);
1317 else if (urb->transfer_flags & URB_DMA_MAP_PAGE)
1318 dma_unmap_page(hcd->self.controller,
1319 urb->transfer_dma,
1320 urb->transfer_buffer_length,
1321 dir);
1322 else if (urb->transfer_flags & URB_DMA_MAP_SINGLE)
1323 dma_unmap_single(hcd->self.controller,
1324 urb->transfer_dma,
1325 urb->transfer_buffer_length,
1326 dir);
1327 else if (urb->transfer_flags & URB_MAP_LOCAL)
1328 hcd_free_coherent(urb->dev->bus,
1329 &urb->transfer_dma,
1330 &urb->transfer_buffer,
1331 urb->transfer_buffer_length,
1332 dir);
1333
1334 /* Make it safe to call this routine more than once */
1335 urb->transfer_flags &= ~(URB_DMA_MAP_SG | URB_DMA_MAP_PAGE |
1336 URB_DMA_MAP_SINGLE | URB_MAP_LOCAL);
1337}
1338EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_for_dma);
1339
1340static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
1341 gfp_t mem_flags)
1342{
1343 if (hcd->driver->map_urb_for_dma)
1344 return hcd->driver->map_urb_for_dma(hcd, urb, mem_flags);
1345 else
1346 return usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
1347}
1348
1349int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
1350 gfp_t mem_flags)
1351{
1352 enum dma_data_direction dir;
1353 int ret = 0;
1354
1355 /* Map the URB's buffers for DMA access.
1356 * Lower level HCD code should use *_dma exclusively,
1357 * unless it uses pio or talks to another transport,
1358 * or uses the provided scatter gather list for bulk.
1359 */
1360
1361 if (usb_endpoint_xfer_control(&urb->ep->desc)) {
1362 if (hcd->self.uses_pio_for_control)
1363 return ret;
1364 if (hcd->self.uses_dma) {
1365 urb->setup_dma = dma_map_single(
1366 hcd->self.controller,
1367 urb->setup_packet,
1368 sizeof(struct usb_ctrlrequest),
1369 DMA_TO_DEVICE);
1370 if (dma_mapping_error(hcd->self.controller,
1371 urb->setup_dma))
1372 return -EAGAIN;
1373 urb->transfer_flags |= URB_SETUP_MAP_SINGLE;
1374 } else if (hcd->driver->flags & HCD_LOCAL_MEM) {
1375 ret = hcd_alloc_coherent(
1376 urb->dev->bus, mem_flags,
1377 &urb->setup_dma,
1378 (void **)&urb->setup_packet,
1379 sizeof(struct usb_ctrlrequest),
1380 DMA_TO_DEVICE);
1381 if (ret)
1382 return ret;
1383 urb->transfer_flags |= URB_SETUP_MAP_LOCAL;
1384 }
1385 }
1386
1387 dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
1388 if (urb->transfer_buffer_length != 0
1389 && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) {
1390 if (hcd->self.uses_dma) {
1391 if (urb->num_sgs) {
1392 int n = dma_map_sg(
1393 hcd->self.controller,
1394 urb->sg,
1395 urb->num_sgs,
1396 dir);
1397 if (n <= 0)
1398 ret = -EAGAIN;
1399 else
1400 urb->transfer_flags |= URB_DMA_MAP_SG;
1401 if (n != urb->num_sgs) {
1402 urb->num_sgs = n;
1403 urb->transfer_flags |=
1404 URB_DMA_SG_COMBINED;
1405 }
1406 } else if (urb->sg) {
1407 struct scatterlist *sg = urb->sg;
1408 urb->transfer_dma = dma_map_page(
1409 hcd->self.controller,
1410 sg_page(sg),
1411 sg->offset,
1412 urb->transfer_buffer_length,
1413 dir);
1414 if (dma_mapping_error(hcd->self.controller,
1415 urb->transfer_dma))
1416 ret = -EAGAIN;
1417 else
1418 urb->transfer_flags |= URB_DMA_MAP_PAGE;
1419 } else {
1420 urb->transfer_dma = dma_map_single(
1421 hcd->self.controller,
1422 urb->transfer_buffer,
1423 urb->transfer_buffer_length,
1424 dir);
1425 if (dma_mapping_error(hcd->self.controller,
1426 urb->transfer_dma))
1427 ret = -EAGAIN;
1428 else
1429 urb->transfer_flags |= URB_DMA_MAP_SINGLE;
1430 }
1431 } else if (hcd->driver->flags & HCD_LOCAL_MEM) {
1432 ret = hcd_alloc_coherent(
1433 urb->dev->bus, mem_flags,
1434 &urb->transfer_dma,
1435 &urb->transfer_buffer,
1436 urb->transfer_buffer_length,
1437 dir);
1438 if (ret == 0)
1439 urb->transfer_flags |= URB_MAP_LOCAL;
1440 }
1441 if (ret && (urb->transfer_flags & (URB_SETUP_MAP_SINGLE |
1442 URB_SETUP_MAP_LOCAL)))
1443 usb_hcd_unmap_urb_for_dma(hcd, urb);
1444 }
1445 return ret;
1446}
1447EXPORT_SYMBOL_GPL(usb_hcd_map_urb_for_dma);
1448
1449/*-------------------------------------------------------------------------*/
1450
1451/* may be called in any context with a valid urb->dev usecount
1452 * caller surrenders "ownership" of urb
1453 * expects usb_submit_urb() to have sanity checked and conditioned all
1454 * inputs in the urb
1455 */
1456int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
1457{
1458 int status;
1459 struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
1460
1461 /* increment urb's reference count as part of giving it to the HCD
1462 * (which will control it). HCD guarantees that it either returns
1463 * an error or calls giveback(), but not both.
1464 */
1465 usb_get_urb(urb);
1466 atomic_inc(&urb->use_count);
1467 atomic_inc(&urb->dev->urbnum);
1468 usbmon_urb_submit(&hcd->self, urb);
1469
1470 /* NOTE requirements on root-hub callers (usbfs and the hub
1471 * driver, for now): URBs' urb->transfer_buffer must be
1472 * valid and usb_buffer_{sync,unmap}() not be needed, since
1473 * they could clobber root hub response data. Also, control
1474 * URBs must be submitted in process context with interrupts
1475 * enabled.
1476 */
1477
1478 if (is_root_hub(urb->dev)) {
1479 status = rh_urb_enqueue(hcd, urb);
1480 } else {
1481 status = map_urb_for_dma(hcd, urb, mem_flags);
1482 if (likely(status == 0)) {
1483 status = hcd->driver->urb_enqueue(hcd, urb, mem_flags);
1484 if (unlikely(status))
1485 unmap_urb_for_dma(hcd, urb);
1486 }
1487 }
1488
1489 if (unlikely(status)) {
1490 usbmon_urb_submit_error(&hcd->self, urb, status);
1491 urb->hcpriv = NULL;
1492 INIT_LIST_HEAD(&urb->urb_list);
1493 atomic_dec(&urb->use_count);
1494 atomic_dec(&urb->dev->urbnum);
1495 if (atomic_read(&urb->reject))
1496 wake_up(&usb_kill_urb_queue);
1497 usb_put_urb(urb);
1498 }
1499 return status;
1500}
1501
1502/*-------------------------------------------------------------------------*/
1503
1504/* this makes the hcd giveback() the urb more quickly, by kicking it
1505 * off hardware queues (which may take a while) and returning it as
1506 * soon as practical. we've already set up the urb's return status,
1507 * but we can't know if the callback completed already.
1508 */
1509static int unlink1(struct usb_hcd *hcd, struct urb *urb, int status)
1510{
1511 int value;
1512
1513 if (is_root_hub(urb->dev))
1514 value = usb_rh_urb_dequeue(hcd, urb, status);
1515 else {
1516
1517 /* The only reason an HCD might fail this call is if
1518 * it has not yet fully queued the urb to begin with.
1519 * Such failures should be harmless. */
1520 value = hcd->driver->urb_dequeue(hcd, urb, status);
1521 }
1522 return value;
1523}
1524
1525/*
1526 * called in any context
1527 *
1528 * caller guarantees urb won't be recycled till both unlink()
1529 * and the urb's completion function return
1530 */
1531int usb_hcd_unlink_urb (struct urb *urb, int status)
1532{
1533 struct usb_hcd *hcd;
1534 int retval = -EIDRM;
1535 unsigned long flags;
1536
1537 /* Prevent the device and bus from going away while
1538 * the unlink is carried out. If they are already gone
1539 * then urb->use_count must be 0, since disconnected
1540 * devices can't have any active URBs.
1541 */
1542 spin_lock_irqsave(&hcd_urb_unlink_lock, flags);
1543 if (atomic_read(&urb->use_count) > 0) {
1544 retval = 0;
1545 usb_get_dev(urb->dev);
1546 }
1547 spin_unlock_irqrestore(&hcd_urb_unlink_lock, flags);
1548 if (retval == 0) {
1549 hcd = bus_to_hcd(urb->dev->bus);
1550 retval = unlink1(hcd, urb, status);
1551 usb_put_dev(urb->dev);
1552 }
1553
1554 if (retval == 0)
1555 retval = -EINPROGRESS;
1556 else if (retval != -EIDRM && retval != -EBUSY)
1557 dev_dbg(&urb->dev->dev, "hcd_unlink_urb %p fail %d\n",
1558 urb, retval);
1559 return retval;
1560}
1561
1562/*-------------------------------------------------------------------------*/
1563
1564/**
1565 * usb_hcd_giveback_urb - return URB from HCD to device driver
1566 * @hcd: host controller returning the URB
1567 * @urb: urb being returned to the USB device driver.
1568 * @status: completion status code for the URB.
1569 * Context: in_interrupt()
1570 *
1571 * This hands the URB from HCD to its USB device driver, using its
1572 * completion function. The HCD has freed all per-urb resources
1573 * (and is done using urb->hcpriv). It also released all HCD locks;
1574 * the device driver won't cause problems if it frees, modifies,
1575 * or resubmits this URB.
1576 *
1577 * If @urb was unlinked, the value of @status will be overridden by
1578 * @urb->unlinked. Erroneous short transfers are detected in case
1579 * the HCD hasn't checked for them.
1580 */
1581void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, int status)
1582{
1583 urb->hcpriv = NULL;
1584 if (unlikely(urb->unlinked))
1585 status = urb->unlinked;
1586 else if (unlikely((urb->transfer_flags & URB_SHORT_NOT_OK) &&
1587 urb->actual_length < urb->transfer_buffer_length &&
1588 !status))
1589 status = -EREMOTEIO;
1590
1591 unmap_urb_for_dma(hcd, urb);
1592 usbmon_urb_complete(&hcd->self, urb, status);
1593 usb_unanchor_urb(urb);
1594
1595 /* pass ownership to the completion handler */
1596 urb->status = status;
1597 urb->complete (urb);
1598 atomic_dec (&urb->use_count);
1599 if (unlikely(atomic_read(&urb->reject)))
1600 wake_up (&usb_kill_urb_queue);
1601 usb_put_urb (urb);
1602}
1603EXPORT_SYMBOL_GPL(usb_hcd_giveback_urb);
1604
1605/*-------------------------------------------------------------------------*/
1606
1607/* Cancel all URBs pending on this endpoint and wait for the endpoint's
1608 * queue to drain completely. The caller must first insure that no more
1609 * URBs can be submitted for this endpoint.
1610 */
1611void usb_hcd_flush_endpoint(struct usb_device *udev,
1612 struct usb_host_endpoint *ep)
1613{
1614 struct usb_hcd *hcd;
1615 struct urb *urb;
1616
1617 if (!ep)
1618 return;
1619 might_sleep();
1620 hcd = bus_to_hcd(udev->bus);
1621
1622 /* No more submits can occur */
1623 spin_lock_irq(&hcd_urb_list_lock);
1624rescan:
1625 list_for_each_entry (urb, &ep->urb_list, urb_list) {
1626 int is_in;
1627
1628 if (urb->unlinked)
1629 continue;
1630 usb_get_urb (urb);
1631 is_in = usb_urb_dir_in(urb);
1632 spin_unlock(&hcd_urb_list_lock);
1633
1634 /* kick hcd */
1635 unlink1(hcd, urb, -ESHUTDOWN);
1636 dev_dbg (hcd->self.controller,
1637 "shutdown urb %p ep%d%s%s\n",
1638 urb, usb_endpoint_num(&ep->desc),
1639 is_in ? "in" : "out",
1640 ({ char *s;
1641
1642 switch (usb_endpoint_type(&ep->desc)) {
1643 case USB_ENDPOINT_XFER_CONTROL:
1644 s = ""; break;
1645 case USB_ENDPOINT_XFER_BULK:
1646 s = "-bulk"; break;
1647 case USB_ENDPOINT_XFER_INT:
1648 s = "-intr"; break;
1649 default:
1650 s = "-iso"; break;
1651 };
1652 s;
1653 }));
1654 usb_put_urb (urb);
1655
1656 /* list contents may have changed */
1657 spin_lock(&hcd_urb_list_lock);
1658 goto rescan;
1659 }
1660 spin_unlock_irq(&hcd_urb_list_lock);
1661
1662 /* Wait until the endpoint queue is completely empty */
1663 while (!list_empty (&ep->urb_list)) {
1664 spin_lock_irq(&hcd_urb_list_lock);
1665
1666 /* The list may have changed while we acquired the spinlock */
1667 urb = NULL;
1668 if (!list_empty (&ep->urb_list)) {
1669 urb = list_entry (ep->urb_list.prev, struct urb,
1670 urb_list);
1671 usb_get_urb (urb);
1672 }
1673 spin_unlock_irq(&hcd_urb_list_lock);
1674
1675 if (urb) {
1676 usb_kill_urb (urb);
1677 usb_put_urb (urb);
1678 }
1679 }
1680}
1681
1682/**
1683 * usb_hcd_alloc_bandwidth - check whether a new bandwidth setting exceeds
1684 * the bus bandwidth
1685 * @udev: target &usb_device
1686 * @new_config: new configuration to install
1687 * @cur_alt: the current alternate interface setting
1688 * @new_alt: alternate interface setting that is being installed
1689 *
1690 * To change configurations, pass in the new configuration in new_config,
1691 * and pass NULL for cur_alt and new_alt.
1692 *
1693 * To reset a device's configuration (put the device in the ADDRESSED state),
1694 * pass in NULL for new_config, cur_alt, and new_alt.
1695 *
1696 * To change alternate interface settings, pass in NULL for new_config,
1697 * pass in the current alternate interface setting in cur_alt,
1698 * and pass in the new alternate interface setting in new_alt.
1699 *
1700 * Returns an error if the requested bandwidth change exceeds the
1701 * bus bandwidth or host controller internal resources.
1702 */
1703int usb_hcd_alloc_bandwidth(struct usb_device *udev,
1704 struct usb_host_config *new_config,
1705 struct usb_host_interface *cur_alt,
1706 struct usb_host_interface *new_alt)
1707{
1708 int num_intfs, i, j;
1709 struct usb_host_interface *alt = NULL;
1710 int ret = 0;
1711 struct usb_hcd *hcd;
1712 struct usb_host_endpoint *ep;
1713
1714 hcd = bus_to_hcd(udev->bus);
1715 if (!hcd->driver->check_bandwidth)
1716 return 0;
1717
1718 /* Configuration is being removed - set configuration 0 */
1719 if (!new_config && !cur_alt) {
1720 for (i = 1; i < 16; ++i) {
1721 ep = udev->ep_out[i];
1722 if (ep)
1723 hcd->driver->drop_endpoint(hcd, udev, ep);
1724 ep = udev->ep_in[i];
1725 if (ep)
1726 hcd->driver->drop_endpoint(hcd, udev, ep);
1727 }
1728 hcd->driver->check_bandwidth(hcd, udev);
1729 return 0;
1730 }
1731 /* Check if the HCD says there's enough bandwidth. Enable all endpoints
1732 * each interface's alt setting 0 and ask the HCD to check the bandwidth
1733 * of the bus. There will always be bandwidth for endpoint 0, so it's
1734 * ok to exclude it.
1735 */
1736 if (new_config) {
1737 num_intfs = new_config->desc.bNumInterfaces;
1738 /* Remove endpoints (except endpoint 0, which is always on the
1739 * schedule) from the old config from the schedule
1740 */
1741 for (i = 1; i < 16; ++i) {
1742 ep = udev->ep_out[i];
1743 if (ep) {
1744 ret = hcd->driver->drop_endpoint(hcd, udev, ep);
1745 if (ret < 0)
1746 goto reset;
1747 }
1748 ep = udev->ep_in[i];
1749 if (ep) {
1750 ret = hcd->driver->drop_endpoint(hcd, udev, ep);
1751 if (ret < 0)
1752 goto reset;
1753 }
1754 }
1755 for (i = 0; i < num_intfs; ++i) {
1756 struct usb_host_interface *first_alt;
1757 int iface_num;
1758
1759 first_alt = &new_config->intf_cache[i]->altsetting[0];
1760 iface_num = first_alt->desc.bInterfaceNumber;
1761 /* Set up endpoints for alternate interface setting 0 */
1762 alt = usb_find_alt_setting(new_config, iface_num, 0);
1763 if (!alt)
1764 /* No alt setting 0? Pick the first setting. */
1765 alt = first_alt;
1766
1767 for (j = 0; j < alt->desc.bNumEndpoints; j++) {
1768 ret = hcd->driver->add_endpoint(hcd, udev, &alt->endpoint[j]);
1769 if (ret < 0)
1770 goto reset;
1771 }
1772 }
1773 }
1774 if (cur_alt && new_alt) {
1775 struct usb_interface *iface = usb_ifnum_to_if(udev,
1776 cur_alt->desc.bInterfaceNumber);
1777
1778 if (!iface)
1779 return -EINVAL;
1780 if (iface->resetting_device) {
1781 /*
1782 * The USB core just reset the device, so the xHCI host
1783 * and the device will think alt setting 0 is installed.
1784 * However, the USB core will pass in the alternate
1785 * setting installed before the reset as cur_alt. Dig
1786 * out the alternate setting 0 structure, or the first
1787 * alternate setting if a broken device doesn't have alt
1788 * setting 0.
1789 */
1790 cur_alt = usb_altnum_to_altsetting(iface, 0);
1791 if (!cur_alt)
1792 cur_alt = &iface->altsetting[0];
1793 }
1794
1795 /* Drop all the endpoints in the current alt setting */
1796 for (i = 0; i < cur_alt->desc.bNumEndpoints; i++) {
1797 ret = hcd->driver->drop_endpoint(hcd, udev,
1798 &cur_alt->endpoint[i]);
1799 if (ret < 0)
1800 goto reset;
1801 }
1802 /* Add all the endpoints in the new alt setting */
1803 for (i = 0; i < new_alt->desc.bNumEndpoints; i++) {
1804 ret = hcd->driver->add_endpoint(hcd, udev,
1805 &new_alt->endpoint[i]);
1806 if (ret < 0)
1807 goto reset;
1808 }
1809 }
1810 ret = hcd->driver->check_bandwidth(hcd, udev);
1811reset:
1812 if (ret < 0)
1813 hcd->driver->reset_bandwidth(hcd, udev);
1814 return ret;
1815}
1816
1817/* Disables the endpoint: synchronizes with the hcd to make sure all
1818 * endpoint state is gone from hardware. usb_hcd_flush_endpoint() must
1819 * have been called previously. Use for set_configuration, set_interface,
1820 * driver removal, physical disconnect.
1821 *
1822 * example: a qh stored in ep->hcpriv, holding state related to endpoint
1823 * type, maxpacket size, toggle, halt status, and scheduling.
1824 */
1825void usb_hcd_disable_endpoint(struct usb_device *udev,
1826 struct usb_host_endpoint *ep)
1827{
1828 struct usb_hcd *hcd;
1829
1830 might_sleep();
1831 hcd = bus_to_hcd(udev->bus);
1832 if (hcd->driver->endpoint_disable)
1833 hcd->driver->endpoint_disable(hcd, ep);
1834}
1835
1836/**
1837 * usb_hcd_reset_endpoint - reset host endpoint state
1838 * @udev: USB device.
1839 * @ep: the endpoint to reset.
1840 *
1841 * Resets any host endpoint state such as the toggle bit, sequence
1842 * number and current window.
1843 */
1844void usb_hcd_reset_endpoint(struct usb_device *udev,
1845 struct usb_host_endpoint *ep)
1846{
1847 struct usb_hcd *hcd = bus_to_hcd(udev->bus);
1848
1849 if (hcd->driver->endpoint_reset)
1850 hcd->driver->endpoint_reset(hcd, ep);
1851 else {
1852 int epnum = usb_endpoint_num(&ep->desc);
1853 int is_out = usb_endpoint_dir_out(&ep->desc);
1854 int is_control = usb_endpoint_xfer_control(&ep->desc);
1855
1856 usb_settoggle(udev, epnum, is_out, 0);
1857 if (is_control)
1858 usb_settoggle(udev, epnum, !is_out, 0);
1859 }
1860}
1861
1862/**
1863 * usb_alloc_streams - allocate bulk endpoint stream IDs.
1864 * @interface: alternate setting that includes all endpoints.
1865 * @eps: array of endpoints that need streams.
1866 * @num_eps: number of endpoints in the array.
1867 * @num_streams: number of streams to allocate.
1868 * @mem_flags: flags hcd should use to allocate memory.
1869 *
1870 * Sets up a group of bulk endpoints to have num_streams stream IDs available.
1871 * Drivers may queue multiple transfers to different stream IDs, which may
1872 * complete in a different order than they were queued.
1873 */
1874int usb_alloc_streams(struct usb_interface *interface,
1875 struct usb_host_endpoint **eps, unsigned int num_eps,
1876 unsigned int num_streams, gfp_t mem_flags)
1877{
1878 struct usb_hcd *hcd;
1879 struct usb_device *dev;
1880 int i;
1881
1882 dev = interface_to_usbdev(interface);
1883 hcd = bus_to_hcd(dev->bus);
1884 if (!hcd->driver->alloc_streams || !hcd->driver->free_streams)
1885 return -EINVAL;
1886 if (dev->speed != USB_SPEED_SUPER)
1887 return -EINVAL;
1888
1889 /* Streams only apply to bulk endpoints. */
1890 for (i = 0; i < num_eps; i++)
1891 if (!usb_endpoint_xfer_bulk(&eps[i]->desc))
1892 return -EINVAL;
1893
1894 return hcd->driver->alloc_streams(hcd, dev, eps, num_eps,
1895 num_streams, mem_flags);
1896}
1897EXPORT_SYMBOL_GPL(usb_alloc_streams);
1898
1899/**
1900 * usb_free_streams - free bulk endpoint stream IDs.
1901 * @interface: alternate setting that includes all endpoints.
1902 * @eps: array of endpoints to remove streams from.
1903 * @num_eps: number of endpoints in the array.
1904 * @mem_flags: flags hcd should use to allocate memory.
1905 *
1906 * Reverts a group of bulk endpoints back to not using stream IDs.
1907 * Can fail if we are given bad arguments, or HCD is broken.
1908 */
1909void usb_free_streams(struct usb_interface *interface,
1910 struct usb_host_endpoint **eps, unsigned int num_eps,
1911 gfp_t mem_flags)
1912{
1913 struct usb_hcd *hcd;
1914 struct usb_device *dev;
1915 int i;
1916
1917 dev = interface_to_usbdev(interface);
1918 hcd = bus_to_hcd(dev->bus);
1919 if (dev->speed != USB_SPEED_SUPER)
1920 return;
1921
1922 /* Streams only apply to bulk endpoints. */
1923 for (i = 0; i < num_eps; i++)
1924 if (!eps[i] || !usb_endpoint_xfer_bulk(&eps[i]->desc))
1925 return;
1926
1927 hcd->driver->free_streams(hcd, dev, eps, num_eps, mem_flags);
1928}
1929EXPORT_SYMBOL_GPL(usb_free_streams);
1930
1931/* Protect against drivers that try to unlink URBs after the device
1932 * is gone, by waiting until all unlinks for @udev are finished.
1933 * Since we don't currently track URBs by device, simply wait until
1934 * nothing is running in the locked region of usb_hcd_unlink_urb().
1935 */
1936void usb_hcd_synchronize_unlinks(struct usb_device *udev)
1937{
1938 spin_lock_irq(&hcd_urb_unlink_lock);
1939 spin_unlock_irq(&hcd_urb_unlink_lock);
1940}
1941
1942/*-------------------------------------------------------------------------*/
1943
1944/* called in any context */
1945int usb_hcd_get_frame_number (struct usb_device *udev)
1946{
1947 struct usb_hcd *hcd = bus_to_hcd(udev->bus);
1948
1949 if (!HCD_RH_RUNNING(hcd))
1950 return -ESHUTDOWN;
1951 return hcd->driver->get_frame_number (hcd);
1952}
1953
1954/*-------------------------------------------------------------------------*/
1955
1956#ifdef CONFIG_PM
1957
1958int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg)
1959{
1960 struct usb_hcd *hcd = container_of(rhdev->bus, struct usb_hcd, self);
1961 int status;
1962 int old_state = hcd->state;
1963
1964 dev_dbg(&rhdev->dev, "bus %s%s\n",
1965 (msg.event & PM_EVENT_AUTO ? "auto-" : ""), "suspend");
1966 if (HCD_DEAD(hcd)) {
1967 dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "suspend");
1968 return 0;
1969 }
1970
1971 if (!hcd->driver->bus_suspend) {
1972 status = -ENOENT;
1973 } else {
1974 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
1975 hcd->state = HC_STATE_QUIESCING;
1976 status = hcd->driver->bus_suspend(hcd);
1977 }
1978 if (status == 0) {
1979 usb_set_device_state(rhdev, USB_STATE_SUSPENDED);
1980 hcd->state = HC_STATE_SUSPENDED;
1981 } else {
1982 spin_lock_irq(&hcd_root_hub_lock);
1983 if (!HCD_DEAD(hcd)) {
1984 set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
1985 hcd->state = old_state;
1986 }
1987 spin_unlock_irq(&hcd_root_hub_lock);
1988 dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
1989 "suspend", status);
1990 }
1991 return status;
1992}
1993
1994int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
1995{
1996 struct usb_hcd *hcd = container_of(rhdev->bus, struct usb_hcd, self);
1997 int status;
1998 int old_state = hcd->state;
1999
2000 dev_dbg(&rhdev->dev, "usb %s%s\n",
2001 (msg.event & PM_EVENT_AUTO ? "auto-" : ""), "resume");
2002 if (HCD_DEAD(hcd)) {
2003 dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "resume");
2004 return 0;
2005 }
2006 if (!hcd->driver->bus_resume)
2007 return -ENOENT;
2008 if (HCD_RH_RUNNING(hcd))
2009 return 0;
2010
2011 hcd->state = HC_STATE_RESUMING;
2012 status = hcd->driver->bus_resume(hcd);
2013 clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
2014 if (status == 0) {
2015 /* TRSMRCY = 10 msec */
2016 msleep(10);
2017 spin_lock_irq(&hcd_root_hub_lock);
2018 if (!HCD_DEAD(hcd)) {
2019 usb_set_device_state(rhdev, rhdev->actconfig
2020 ? USB_STATE_CONFIGURED
2021 : USB_STATE_ADDRESS);
2022 set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2023 hcd->state = HC_STATE_RUNNING;
2024 }
2025 spin_unlock_irq(&hcd_root_hub_lock);
2026 } else {
2027 hcd->state = old_state;
2028 dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
2029 "resume", status);
2030 if (status != -ESHUTDOWN)
2031 usb_hc_died(hcd);
2032 }
2033 return status;
2034}
2035
2036#endif /* CONFIG_PM */
2037
2038#ifdef CONFIG_USB_SUSPEND
2039
2040/* Workqueue routine for root-hub remote wakeup */
2041static void hcd_resume_work(struct work_struct *work)
2042{
2043 struct usb_hcd *hcd = container_of(work, struct usb_hcd, wakeup_work);
2044 struct usb_device *udev = hcd->self.root_hub;
2045
2046 usb_lock_device(udev);
2047 usb_remote_wakeup(udev);
2048 usb_unlock_device(udev);
2049}
2050
2051/**
2052 * usb_hcd_resume_root_hub - called by HCD to resume its root hub
2053 * @hcd: host controller for this root hub
2054 *
2055 * The USB host controller calls this function when its root hub is
2056 * suspended (with the remote wakeup feature enabled) and a remote
2057 * wakeup request is received. The routine submits a workqueue request
2058 * to resume the root hub (that is, manage its downstream ports again).
2059 */
2060void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
2061{
2062 unsigned long flags;
2063
2064 spin_lock_irqsave (&hcd_root_hub_lock, flags);
2065 if (hcd->rh_registered) {
2066 set_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
2067 queue_work(pm_wq, &hcd->wakeup_work);
2068 }
2069 spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
2070}
2071EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub);
2072
2073#endif /* CONFIG_USB_SUSPEND */
2074
2075/*-------------------------------------------------------------------------*/
2076
2077#ifdef CONFIG_USB_OTG
2078
2079/**
2080 * usb_bus_start_enum - start immediate enumeration (for OTG)
2081 * @bus: the bus (must use hcd framework)
2082 * @port_num: 1-based number of port; usually bus->otg_port
2083 * Context: in_interrupt()
2084 *
2085 * Starts enumeration, with an immediate reset followed later by
2086 * khubd identifying and possibly configuring the device.
2087 * This is needed by OTG controller drivers, where it helps meet
2088 * HNP protocol timing requirements for starting a port reset.
2089 */
2090int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num)
2091{
2092 struct usb_hcd *hcd;
2093 int status = -EOPNOTSUPP;
2094
2095 /* NOTE: since HNP can't start by grabbing the bus's address0_sem,
2096 * boards with root hubs hooked up to internal devices (instead of
2097 * just the OTG port) may need more attention to resetting...
2098 */
2099 hcd = container_of (bus, struct usb_hcd, self);
2100 if (port_num && hcd->driver->start_port_reset)
2101 status = hcd->driver->start_port_reset(hcd, port_num);
2102
2103 /* run khubd shortly after (first) root port reset finishes;
2104 * it may issue others, until at least 50 msecs have passed.
2105 */
2106 if (status == 0)
2107 mod_timer(&hcd->rh_timer, jiffies + msecs_to_jiffies(10));
2108 return status;
2109}
2110EXPORT_SYMBOL_GPL(usb_bus_start_enum);
2111
2112#endif
2113
2114/*-------------------------------------------------------------------------*/
2115
2116/**
2117 * usb_hcd_irq - hook IRQs to HCD framework (bus glue)
2118 * @irq: the IRQ being raised
2119 * @__hcd: pointer to the HCD whose IRQ is being signaled
2120 *
2121 * If the controller isn't HALTed, calls the driver's irq handler.
2122 * Checks whether the controller is now dead.
2123 */
2124irqreturn_t usb_hcd_irq (int irq, void *__hcd)
2125{
2126 struct usb_hcd *hcd = __hcd;
2127 unsigned long flags;
2128 irqreturn_t rc;
2129
2130 /* IRQF_DISABLED doesn't work correctly with shared IRQs
2131 * when the first handler doesn't use it. So let's just
2132 * assume it's never used.
2133 */
2134 local_irq_save(flags);
2135
2136 if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd))) {
2137 rc = IRQ_NONE;
2138 } else if (hcd->driver->irq(hcd) == IRQ_NONE) {
2139 rc = IRQ_NONE;
2140 } else {
2141 set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
2142 if (hcd->shared_hcd)
2143 set_bit(HCD_FLAG_SAW_IRQ, &hcd->shared_hcd->flags);
2144 rc = IRQ_HANDLED;
2145 }
2146
2147 local_irq_restore(flags);
2148 return rc;
2149}
2150EXPORT_SYMBOL_GPL(usb_hcd_irq);
2151
2152/*-------------------------------------------------------------------------*/
2153
2154/**
2155 * usb_hc_died - report abnormal shutdown of a host controller (bus glue)
2156 * @hcd: pointer to the HCD representing the controller
2157 *
2158 * This is called by bus glue to report a USB host controller that died
2159 * while operations may still have been pending. It's called automatically
2160 * by the PCI glue, so only glue for non-PCI busses should need to call it.
2161 *
2162 * Only call this function with the primary HCD.
2163 */
2164void usb_hc_died (struct usb_hcd *hcd)
2165{
2166 unsigned long flags;
2167
2168 dev_err (hcd->self.controller, "HC died; cleaning up\n");
2169
2170 spin_lock_irqsave (&hcd_root_hub_lock, flags);
2171 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2172 set_bit(HCD_FLAG_DEAD, &hcd->flags);
2173 if (hcd->rh_registered) {
2174 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2175
2176 /* make khubd clean up old urbs and devices */
2177 usb_set_device_state (hcd->self.root_hub,
2178 USB_STATE_NOTATTACHED);
2179 usb_kick_khubd (hcd->self.root_hub);
2180 }
2181 if (usb_hcd_is_primary_hcd(hcd) && hcd->shared_hcd) {
2182 hcd = hcd->shared_hcd;
2183 if (hcd->rh_registered) {
2184 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2185
2186 /* make khubd clean up old urbs and devices */
2187 usb_set_device_state(hcd->self.root_hub,
2188 USB_STATE_NOTATTACHED);
2189 usb_kick_khubd(hcd->self.root_hub);
2190 }
2191 }
2192 spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
2193 /* Make sure that the other roothub is also deallocated. */
2194}
2195EXPORT_SYMBOL_GPL (usb_hc_died);
2196
2197/*-------------------------------------------------------------------------*/
2198
2199/**
2200 * usb_create_shared_hcd - create and initialize an HCD structure
2201 * @driver: HC driver that will use this hcd
2202 * @dev: device for this HC, stored in hcd->self.controller
2203 * @bus_name: value to store in hcd->self.bus_name
2204 * @primary_hcd: a pointer to the usb_hcd structure that is sharing the
2205 * PCI device. Only allocate certain resources for the primary HCD
2206 * Context: !in_interrupt()
2207 *
2208 * Allocate a struct usb_hcd, with extra space at the end for the
2209 * HC driver's private data. Initialize the generic members of the
2210 * hcd structure.
2211 *
2212 * If memory is unavailable, returns NULL.
2213 */
2214struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver,
2215 struct device *dev, const char *bus_name,
2216 struct usb_hcd *primary_hcd)
2217{
2218 struct usb_hcd *hcd;
2219
2220 hcd = kzalloc(sizeof(*hcd) + driver->hcd_priv_size, GFP_KERNEL);
2221 if (!hcd) {
2222 dev_dbg (dev, "hcd alloc failed\n");
2223 return NULL;
2224 }
2225 if (primary_hcd == NULL) {
2226 hcd->bandwidth_mutex = kmalloc(sizeof(*hcd->bandwidth_mutex),
2227 GFP_KERNEL);
2228 if (!hcd->bandwidth_mutex) {
2229 kfree(hcd);
2230 dev_dbg(dev, "hcd bandwidth mutex alloc failed\n");
2231 return NULL;
2232 }
2233 mutex_init(hcd->bandwidth_mutex);
2234 dev_set_drvdata(dev, hcd);
2235 } else {
2236 hcd->bandwidth_mutex = primary_hcd->bandwidth_mutex;
2237 hcd->primary_hcd = primary_hcd;
2238 primary_hcd->primary_hcd = primary_hcd;
2239 hcd->shared_hcd = primary_hcd;
2240 primary_hcd->shared_hcd = hcd;
2241 }
2242
2243 kref_init(&hcd->kref);
2244
2245 usb_bus_init(&hcd->self);
2246 hcd->self.controller = dev;
2247 hcd->self.bus_name = bus_name;
2248 hcd->self.uses_dma = (dev->dma_mask != NULL);
2249
2250 init_timer(&hcd->rh_timer);
2251 hcd->rh_timer.function = rh_timer_func;
2252 hcd->rh_timer.data = (unsigned long) hcd;
2253#ifdef CONFIG_USB_SUSPEND
2254 INIT_WORK(&hcd->wakeup_work, hcd_resume_work);
2255#endif
2256
2257 hcd->driver = driver;
2258 hcd->speed = driver->flags & HCD_MASK;
2259 hcd->product_desc = (driver->product_desc) ? driver->product_desc :
2260 "USB Host Controller";
2261 return hcd;
2262}
2263EXPORT_SYMBOL_GPL(usb_create_shared_hcd);
2264
2265/**
2266 * usb_create_hcd - create and initialize an HCD structure
2267 * @driver: HC driver that will use this hcd
2268 * @dev: device for this HC, stored in hcd->self.controller
2269 * @bus_name: value to store in hcd->self.bus_name
2270 * Context: !in_interrupt()
2271 *
2272 * Allocate a struct usb_hcd, with extra space at the end for the
2273 * HC driver's private data. Initialize the generic members of the
2274 * hcd structure.
2275 *
2276 * If memory is unavailable, returns NULL.
2277 */
2278struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
2279 struct device *dev, const char *bus_name)
2280{
2281 return usb_create_shared_hcd(driver, dev, bus_name, NULL);
2282}
2283EXPORT_SYMBOL_GPL(usb_create_hcd);
2284
2285/*
2286 * Roothubs that share one PCI device must also share the bandwidth mutex.
2287 * Don't deallocate the bandwidth_mutex until the last shared usb_hcd is
2288 * deallocated.
2289 *
2290 * Make sure to only deallocate the bandwidth_mutex when the primary HCD is
2291 * freed. When hcd_release() is called for the non-primary HCD, set the
2292 * primary_hcd's shared_hcd pointer to null (since the non-primary HCD will be
2293 * freed shortly).
2294 */
2295static void hcd_release (struct kref *kref)
2296{
2297 struct usb_hcd *hcd = container_of (kref, struct usb_hcd, kref);
2298
2299 if (usb_hcd_is_primary_hcd(hcd))
2300 kfree(hcd->bandwidth_mutex);
2301 else
2302 hcd->shared_hcd->shared_hcd = NULL;
2303 kfree(hcd);
2304}
2305
2306struct usb_hcd *usb_get_hcd (struct usb_hcd *hcd)
2307{
2308 if (hcd)
2309 kref_get (&hcd->kref);
2310 return hcd;
2311}
2312EXPORT_SYMBOL_GPL(usb_get_hcd);
2313
2314void usb_put_hcd (struct usb_hcd *hcd)
2315{
2316 if (hcd)
2317 kref_put (&hcd->kref, hcd_release);
2318}
2319EXPORT_SYMBOL_GPL(usb_put_hcd);
2320
2321int usb_hcd_is_primary_hcd(struct usb_hcd *hcd)
2322{
2323 if (!hcd->primary_hcd)
2324 return 1;
2325 return hcd == hcd->primary_hcd;
2326}
2327EXPORT_SYMBOL_GPL(usb_hcd_is_primary_hcd);
2328
2329static int usb_hcd_request_irqs(struct usb_hcd *hcd,
2330 unsigned int irqnum, unsigned long irqflags)
2331{
2332 int retval;
2333
2334 if (hcd->driver->irq) {
2335
2336 /* IRQF_DISABLED doesn't work as advertised when used together
2337 * with IRQF_SHARED. As usb_hcd_irq() will always disable
2338 * interrupts we can remove it here.
2339 */
2340 if (irqflags & IRQF_SHARED)
2341 irqflags &= ~IRQF_DISABLED;
2342
2343 snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
2344 hcd->driver->description, hcd->self.busnum);
2345 retval = request_irq(irqnum, &usb_hcd_irq, irqflags,
2346 hcd->irq_descr, hcd);
2347 if (retval != 0) {
2348 dev_err(hcd->self.controller,
2349 "request interrupt %d failed\n",
2350 irqnum);
2351 return retval;
2352 }
2353 hcd->irq = irqnum;
2354 dev_info(hcd->self.controller, "irq %d, %s 0x%08llx\n", irqnum,
2355 (hcd->driver->flags & HCD_MEMORY) ?
2356 "io mem" : "io base",
2357 (unsigned long long)hcd->rsrc_start);
2358 } else {
2359 hcd->irq = -1;
2360 if (hcd->rsrc_start)
2361 dev_info(hcd->self.controller, "%s 0x%08llx\n",
2362 (hcd->driver->flags & HCD_MEMORY) ?
2363 "io mem" : "io base",
2364 (unsigned long long)hcd->rsrc_start);
2365 }
2366 return 0;
2367}
2368
2369/**
2370 * usb_add_hcd - finish generic HCD structure initialization and register
2371 * @hcd: the usb_hcd structure to initialize
2372 * @irqnum: Interrupt line to allocate
2373 * @irqflags: Interrupt type flags
2374 *
2375 * Finish the remaining parts of generic HCD initialization: allocate the
2376 * buffers of consistent memory, register the bus, request the IRQ line,
2377 * and call the driver's reset() and start() routines.
2378 */
2379int usb_add_hcd(struct usb_hcd *hcd,
2380 unsigned int irqnum, unsigned long irqflags)
2381{
2382 int retval;
2383 struct usb_device *rhdev;
2384
2385 dev_info(hcd->self.controller, "%s\n", hcd->product_desc);
2386
2387 /* Keep old behaviour if authorized_default is not in [0, 1]. */
2388 if (authorized_default < 0 || authorized_default > 1)
2389 hcd->authorized_default = hcd->wireless? 0 : 1;
2390 else
2391 hcd->authorized_default = authorized_default;
2392 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
2393
2394 /* HC is in reset state, but accessible. Now do the one-time init,
2395 * bottom up so that hcds can customize the root hubs before khubd
2396 * starts talking to them. (Note, bus id is assigned early too.)
2397 */
2398 if ((retval = hcd_buffer_create(hcd)) != 0) {
2399 dev_dbg(hcd->self.controller, "pool alloc failed\n");
2400 return retval;
2401 }
2402
2403 if ((retval = usb_register_bus(&hcd->self)) < 0)
2404 goto err_register_bus;
2405
2406 if ((rhdev = usb_alloc_dev(NULL, &hcd->self, 0)) == NULL) {
2407 dev_err(hcd->self.controller, "unable to allocate root hub\n");
2408 retval = -ENOMEM;
2409 goto err_allocate_root_hub;
2410 }
2411 hcd->self.root_hub = rhdev;
2412
2413 switch (hcd->speed) {
2414 case HCD_USB11:
2415 rhdev->speed = USB_SPEED_FULL;
2416 break;
2417 case HCD_USB2:
2418 rhdev->speed = USB_SPEED_HIGH;
2419 break;
2420 case HCD_USB3:
2421 rhdev->speed = USB_SPEED_SUPER;
2422 break;
2423 default:
2424 retval = -EINVAL;
2425 goto err_set_rh_speed;
2426 }
2427
2428 /* wakeup flag init defaults to "everything works" for root hubs,
2429 * but drivers can override it in reset() if needed, along with
2430 * recording the overall controller's system wakeup capability.
2431 */
2432 device_init_wakeup(&rhdev->dev, 1);
2433
2434 /* HCD_FLAG_RH_RUNNING doesn't matter until the root hub is
2435 * registered. But since the controller can die at any time,
2436 * let's initialize the flag before touching the hardware.
2437 */
2438 set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2439
2440 /* "reset" is misnamed; its role is now one-time init. the controller
2441 * should already have been reset (and boot firmware kicked off etc).
2442 */
2443 if (hcd->driver->reset && (retval = hcd->driver->reset(hcd)) < 0) {
2444 dev_err(hcd->self.controller, "can't setup\n");
2445 goto err_hcd_driver_setup;
2446 }
2447 hcd->rh_pollable = 1;
2448
2449 /* NOTE: root hub and controller capabilities may not be the same */
2450 if (device_can_wakeup(hcd->self.controller)
2451 && device_can_wakeup(&hcd->self.root_hub->dev))
2452 dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
2453
2454 /* enable irqs just before we start the controller */
2455 if (usb_hcd_is_primary_hcd(hcd)) {
2456 retval = usb_hcd_request_irqs(hcd, irqnum, irqflags);
2457 if (retval)
2458 goto err_request_irq;
2459 }
2460
2461 hcd->state = HC_STATE_RUNNING;
2462 retval = hcd->driver->start(hcd);
2463 if (retval < 0) {
2464 dev_err(hcd->self.controller, "startup error %d\n", retval);
2465 goto err_hcd_driver_start;
2466 }
2467
2468 /* starting here, usbcore will pay attention to this root hub */
2469 rhdev->bus_mA = min(500u, hcd->power_budget);
2470 if ((retval = register_root_hub(hcd)) != 0)
2471 goto err_register_root_hub;
2472
2473 retval = sysfs_create_group(&rhdev->dev.kobj, &usb_bus_attr_group);
2474 if (retval < 0) {
2475 printk(KERN_ERR "Cannot register USB bus sysfs attributes: %d\n",
2476 retval);
2477 goto error_create_attr_group;
2478 }
2479 if (hcd->uses_new_polling && HCD_POLL_RH(hcd))
2480 usb_hcd_poll_rh_status(hcd);
2481 return retval;
2482
2483error_create_attr_group:
2484 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2485 if (HC_IS_RUNNING(hcd->state))
2486 hcd->state = HC_STATE_QUIESCING;
2487 spin_lock_irq(&hcd_root_hub_lock);
2488 hcd->rh_registered = 0;
2489 spin_unlock_irq(&hcd_root_hub_lock);
2490
2491#ifdef CONFIG_USB_SUSPEND
2492 cancel_work_sync(&hcd->wakeup_work);
2493#endif
2494 mutex_lock(&usb_bus_list_lock);
2495 usb_disconnect(&rhdev); /* Sets rhdev to NULL */
2496 mutex_unlock(&usb_bus_list_lock);
2497err_register_root_hub:
2498 hcd->rh_pollable = 0;
2499 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2500 del_timer_sync(&hcd->rh_timer);
2501 hcd->driver->stop(hcd);
2502 hcd->state = HC_STATE_HALT;
2503 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2504 del_timer_sync(&hcd->rh_timer);
2505err_hcd_driver_start:
2506 if (usb_hcd_is_primary_hcd(hcd) && hcd->irq >= 0)
2507 free_irq(irqnum, hcd);
2508err_request_irq:
2509err_hcd_driver_setup:
2510err_set_rh_speed:
2511 usb_put_dev(hcd->self.root_hub);
2512err_allocate_root_hub:
2513 usb_deregister_bus(&hcd->self);
2514err_register_bus:
2515 hcd_buffer_destroy(hcd);
2516 return retval;
2517}
2518EXPORT_SYMBOL_GPL(usb_add_hcd);
2519
2520/**
2521 * usb_remove_hcd - shutdown processing for generic HCDs
2522 * @hcd: the usb_hcd structure to remove
2523 * Context: !in_interrupt()
2524 *
2525 * Disconnects the root hub, then reverses the effects of usb_add_hcd(),
2526 * invoking the HCD's stop() method.
2527 */
2528void usb_remove_hcd(struct usb_hcd *hcd)
2529{
2530 struct usb_device *rhdev = hcd->self.root_hub;
2531
2532 dev_info(hcd->self.controller, "remove, state %x\n", hcd->state);
2533
2534 usb_get_dev(rhdev);
2535 sysfs_remove_group(&rhdev->dev.kobj, &usb_bus_attr_group);
2536
2537 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2538 if (HC_IS_RUNNING (hcd->state))
2539 hcd->state = HC_STATE_QUIESCING;
2540
2541 dev_dbg(hcd->self.controller, "roothub graceful disconnect\n");
2542 spin_lock_irq (&hcd_root_hub_lock);
2543 hcd->rh_registered = 0;
2544 spin_unlock_irq (&hcd_root_hub_lock);
2545
2546#ifdef CONFIG_USB_SUSPEND
2547 cancel_work_sync(&hcd->wakeup_work);
2548#endif
2549
2550 mutex_lock(&usb_bus_list_lock);
2551 usb_disconnect(&rhdev); /* Sets rhdev to NULL */
2552 mutex_unlock(&usb_bus_list_lock);
2553
2554 /* Prevent any more root-hub status calls from the timer.
2555 * The HCD might still restart the timer (if a port status change
2556 * interrupt occurs), but usb_hcd_poll_rh_status() won't invoke
2557 * the hub_status_data() callback.
2558 */
2559 hcd->rh_pollable = 0;
2560 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2561 del_timer_sync(&hcd->rh_timer);
2562
2563 hcd->driver->stop(hcd);
2564 hcd->state = HC_STATE_HALT;
2565
2566 /* In case the HCD restarted the timer, stop it again. */
2567 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2568 del_timer_sync(&hcd->rh_timer);
2569
2570 if (usb_hcd_is_primary_hcd(hcd)) {
2571 if (hcd->irq >= 0)
2572 free_irq(hcd->irq, hcd);
2573 }
2574
2575 usb_put_dev(hcd->self.root_hub);
2576 usb_deregister_bus(&hcd->self);
2577 hcd_buffer_destroy(hcd);
2578}
2579EXPORT_SYMBOL_GPL(usb_remove_hcd);
2580
2581void
2582usb_hcd_platform_shutdown(struct platform_device* dev)
2583{
2584 struct usb_hcd *hcd = platform_get_drvdata(dev);
2585
2586 if (hcd->driver->shutdown)
2587 hcd->driver->shutdown(hcd);
2588}
2589EXPORT_SYMBOL_GPL(usb_hcd_platform_shutdown);
2590
2591/*-------------------------------------------------------------------------*/
2592
2593#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
2594
2595struct usb_mon_operations *mon_ops;
2596
2597/*
2598 * The registration is unlocked.
2599 * We do it this way because we do not want to lock in hot paths.
2600 *
2601 * Notice that the code is minimally error-proof. Because usbmon needs
2602 * symbols from usbcore, usbcore gets referenced and cannot be unloaded first.
2603 */
2604
2605int usb_mon_register (struct usb_mon_operations *ops)
2606{
2607
2608 if (mon_ops)
2609 return -EBUSY;
2610
2611 mon_ops = ops;
2612 mb();
2613 return 0;
2614}
2615EXPORT_SYMBOL_GPL (usb_mon_register);
2616
2617void usb_mon_deregister (void)
2618{
2619
2620 if (mon_ops == NULL) {
2621 printk(KERN_ERR "USB: monitor was not registered\n");
2622 return;
2623 }
2624 mon_ops = NULL;
2625 mb();
2626}
2627EXPORT_SYMBOL_GPL (usb_mon_deregister);
2628
2629#endif /* CONFIG_USB_MON || CONFIG_USB_MON_MODULE */
1/*
2 * (C) Copyright Linus Torvalds 1999
3 * (C) Copyright Johannes Erdfelt 1999-2001
4 * (C) Copyright Andreas Gal 1999
5 * (C) Copyright Gregory P. Smith 1999
6 * (C) Copyright Deti Fliegl 1999
7 * (C) Copyright Randy Dunlap 2000
8 * (C) Copyright David Brownell 2000-2002
9 *
10 * This program is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by the
12 * Free Software Foundation; either version 2 of the License, or (at your
13 * option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful, but
16 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
17 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
18 * for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software Foundation,
22 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 */
24
25#include <linux/bcd.h>
26#include <linux/module.h>
27#include <linux/version.h>
28#include <linux/kernel.h>
29#include <linux/slab.h>
30#include <linux/completion.h>
31#include <linux/utsname.h>
32#include <linux/mm.h>
33#include <asm/io.h>
34#include <linux/device.h>
35#include <linux/dma-mapping.h>
36#include <linux/mutex.h>
37#include <asm/irq.h>
38#include <asm/byteorder.h>
39#include <asm/unaligned.h>
40#include <linux/platform_device.h>
41#include <linux/workqueue.h>
42#include <linux/pm_runtime.h>
43#include <linux/types.h>
44
45#include <linux/phy/phy.h>
46#include <linux/usb.h>
47#include <linux/usb/hcd.h>
48#include <linux/usb/phy.h>
49
50#include "usb.h"
51
52
53/*-------------------------------------------------------------------------*/
54
55/*
56 * USB Host Controller Driver framework
57 *
58 * Plugs into usbcore (usb_bus) and lets HCDs share code, minimizing
59 * HCD-specific behaviors/bugs.
60 *
61 * This does error checks, tracks devices and urbs, and delegates to a
62 * "hc_driver" only for code (and data) that really needs to know about
63 * hardware differences. That includes root hub registers, i/o queues,
64 * and so on ... but as little else as possible.
65 *
66 * Shared code includes most of the "root hub" code (these are emulated,
67 * though each HC's hardware works differently) and PCI glue, plus request
68 * tracking overhead. The HCD code should only block on spinlocks or on
69 * hardware handshaking; blocking on software events (such as other kernel
70 * threads releasing resources, or completing actions) is all generic.
71 *
72 * Happens the USB 2.0 spec says this would be invisible inside the "USBD",
73 * and includes mostly a "HCDI" (HCD Interface) along with some APIs used
74 * only by the hub driver ... and that neither should be seen or used by
75 * usb client device drivers.
76 *
77 * Contributors of ideas or unattributed patches include: David Brownell,
78 * Roman Weissgaerber, Rory Bolt, Greg Kroah-Hartman, ...
79 *
80 * HISTORY:
81 * 2002-02-21 Pull in most of the usb_bus support from usb.c; some
82 * associated cleanup. "usb_hcd" still != "usb_bus".
83 * 2001-12-12 Initial patch version for Linux 2.5.1 kernel.
84 */
85
86/*-------------------------------------------------------------------------*/
87
88/* Keep track of which host controller drivers are loaded */
89unsigned long usb_hcds_loaded;
90EXPORT_SYMBOL_GPL(usb_hcds_loaded);
91
92/* host controllers we manage */
93DEFINE_IDR (usb_bus_idr);
94EXPORT_SYMBOL_GPL (usb_bus_idr);
95
96/* used when allocating bus numbers */
97#define USB_MAXBUS 64
98
99/* used when updating list of hcds */
100DEFINE_MUTEX(usb_bus_idr_lock); /* exported only for usbfs */
101EXPORT_SYMBOL_GPL (usb_bus_idr_lock);
102
103/* used for controlling access to virtual root hubs */
104static DEFINE_SPINLOCK(hcd_root_hub_lock);
105
106/* used when updating an endpoint's URB list */
107static DEFINE_SPINLOCK(hcd_urb_list_lock);
108
109/* used to protect against unlinking URBs after the device is gone */
110static DEFINE_SPINLOCK(hcd_urb_unlink_lock);
111
112/* wait queue for synchronous unlinks */
113DECLARE_WAIT_QUEUE_HEAD(usb_kill_urb_queue);
114
115static inline int is_root_hub(struct usb_device *udev)
116{
117 return (udev->parent == NULL);
118}
119
120/*-------------------------------------------------------------------------*/
121
122/*
123 * Sharable chunks of root hub code.
124 */
125
126/*-------------------------------------------------------------------------*/
127#define KERNEL_REL bin2bcd(((LINUX_VERSION_CODE >> 16) & 0x0ff))
128#define KERNEL_VER bin2bcd(((LINUX_VERSION_CODE >> 8) & 0x0ff))
129
130/* usb 3.1 root hub device descriptor */
131static const u8 usb31_rh_dev_descriptor[18] = {
132 0x12, /* __u8 bLength; */
133 USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
134 0x10, 0x03, /* __le16 bcdUSB; v3.1 */
135
136 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
137 0x00, /* __u8 bDeviceSubClass; */
138 0x03, /* __u8 bDeviceProtocol; USB 3 hub */
139 0x09, /* __u8 bMaxPacketSize0; 2^9 = 512 Bytes */
140
141 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
142 0x03, 0x00, /* __le16 idProduct; device 0x0003 */
143 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
144
145 0x03, /* __u8 iManufacturer; */
146 0x02, /* __u8 iProduct; */
147 0x01, /* __u8 iSerialNumber; */
148 0x01 /* __u8 bNumConfigurations; */
149};
150
151/* usb 3.0 root hub device descriptor */
152static const u8 usb3_rh_dev_descriptor[18] = {
153 0x12, /* __u8 bLength; */
154 USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
155 0x00, 0x03, /* __le16 bcdUSB; v3.0 */
156
157 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
158 0x00, /* __u8 bDeviceSubClass; */
159 0x03, /* __u8 bDeviceProtocol; USB 3.0 hub */
160 0x09, /* __u8 bMaxPacketSize0; 2^9 = 512 Bytes */
161
162 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
163 0x03, 0x00, /* __le16 idProduct; device 0x0003 */
164 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
165
166 0x03, /* __u8 iManufacturer; */
167 0x02, /* __u8 iProduct; */
168 0x01, /* __u8 iSerialNumber; */
169 0x01 /* __u8 bNumConfigurations; */
170};
171
172/* usb 2.5 (wireless USB 1.0) root hub device descriptor */
173static const u8 usb25_rh_dev_descriptor[18] = {
174 0x12, /* __u8 bLength; */
175 USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
176 0x50, 0x02, /* __le16 bcdUSB; v2.5 */
177
178 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
179 0x00, /* __u8 bDeviceSubClass; */
180 0x00, /* __u8 bDeviceProtocol; [ usb 2.0 no TT ] */
181 0xFF, /* __u8 bMaxPacketSize0; always 0xFF (WUSB Spec 7.4.1). */
182
183 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
184 0x02, 0x00, /* __le16 idProduct; device 0x0002 */
185 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
186
187 0x03, /* __u8 iManufacturer; */
188 0x02, /* __u8 iProduct; */
189 0x01, /* __u8 iSerialNumber; */
190 0x01 /* __u8 bNumConfigurations; */
191};
192
193/* usb 2.0 root hub device descriptor */
194static const u8 usb2_rh_dev_descriptor[18] = {
195 0x12, /* __u8 bLength; */
196 USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
197 0x00, 0x02, /* __le16 bcdUSB; v2.0 */
198
199 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
200 0x00, /* __u8 bDeviceSubClass; */
201 0x00, /* __u8 bDeviceProtocol; [ usb 2.0 no TT ] */
202 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
203
204 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
205 0x02, 0x00, /* __le16 idProduct; device 0x0002 */
206 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
207
208 0x03, /* __u8 iManufacturer; */
209 0x02, /* __u8 iProduct; */
210 0x01, /* __u8 iSerialNumber; */
211 0x01 /* __u8 bNumConfigurations; */
212};
213
214/* no usb 2.0 root hub "device qualifier" descriptor: one speed only */
215
216/* usb 1.1 root hub device descriptor */
217static const u8 usb11_rh_dev_descriptor[18] = {
218 0x12, /* __u8 bLength; */
219 USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
220 0x10, 0x01, /* __le16 bcdUSB; v1.1 */
221
222 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
223 0x00, /* __u8 bDeviceSubClass; */
224 0x00, /* __u8 bDeviceProtocol; [ low/full speeds only ] */
225 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
226
227 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
228 0x01, 0x00, /* __le16 idProduct; device 0x0001 */
229 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
230
231 0x03, /* __u8 iManufacturer; */
232 0x02, /* __u8 iProduct; */
233 0x01, /* __u8 iSerialNumber; */
234 0x01 /* __u8 bNumConfigurations; */
235};
236
237
238/*-------------------------------------------------------------------------*/
239
240/* Configuration descriptors for our root hubs */
241
242static const u8 fs_rh_config_descriptor[] = {
243
244 /* one configuration */
245 0x09, /* __u8 bLength; */
246 USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
247 0x19, 0x00, /* __le16 wTotalLength; */
248 0x01, /* __u8 bNumInterfaces; (1) */
249 0x01, /* __u8 bConfigurationValue; */
250 0x00, /* __u8 iConfiguration; */
251 0xc0, /* __u8 bmAttributes;
252 Bit 7: must be set,
253 6: Self-powered,
254 5: Remote wakeup,
255 4..0: resvd */
256 0x00, /* __u8 MaxPower; */
257
258 /* USB 1.1:
259 * USB 2.0, single TT organization (mandatory):
260 * one interface, protocol 0
261 *
262 * USB 2.0, multiple TT organization (optional):
263 * two interfaces, protocols 1 (like single TT)
264 * and 2 (multiple TT mode) ... config is
265 * sometimes settable
266 * NOT IMPLEMENTED
267 */
268
269 /* one interface */
270 0x09, /* __u8 if_bLength; */
271 USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */
272 0x00, /* __u8 if_bInterfaceNumber; */
273 0x00, /* __u8 if_bAlternateSetting; */
274 0x01, /* __u8 if_bNumEndpoints; */
275 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
276 0x00, /* __u8 if_bInterfaceSubClass; */
277 0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */
278 0x00, /* __u8 if_iInterface; */
279
280 /* one endpoint (status change endpoint) */
281 0x07, /* __u8 ep_bLength; */
282 USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
283 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
284 0x03, /* __u8 ep_bmAttributes; Interrupt */
285 0x02, 0x00, /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */
286 0xff /* __u8 ep_bInterval; (255ms -- usb 2.0 spec) */
287};
288
289static const u8 hs_rh_config_descriptor[] = {
290
291 /* one configuration */
292 0x09, /* __u8 bLength; */
293 USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
294 0x19, 0x00, /* __le16 wTotalLength; */
295 0x01, /* __u8 bNumInterfaces; (1) */
296 0x01, /* __u8 bConfigurationValue; */
297 0x00, /* __u8 iConfiguration; */
298 0xc0, /* __u8 bmAttributes;
299 Bit 7: must be set,
300 6: Self-powered,
301 5: Remote wakeup,
302 4..0: resvd */
303 0x00, /* __u8 MaxPower; */
304
305 /* USB 1.1:
306 * USB 2.0, single TT organization (mandatory):
307 * one interface, protocol 0
308 *
309 * USB 2.0, multiple TT organization (optional):
310 * two interfaces, protocols 1 (like single TT)
311 * and 2 (multiple TT mode) ... config is
312 * sometimes settable
313 * NOT IMPLEMENTED
314 */
315
316 /* one interface */
317 0x09, /* __u8 if_bLength; */
318 USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */
319 0x00, /* __u8 if_bInterfaceNumber; */
320 0x00, /* __u8 if_bAlternateSetting; */
321 0x01, /* __u8 if_bNumEndpoints; */
322 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
323 0x00, /* __u8 if_bInterfaceSubClass; */
324 0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */
325 0x00, /* __u8 if_iInterface; */
326
327 /* one endpoint (status change endpoint) */
328 0x07, /* __u8 ep_bLength; */
329 USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
330 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
331 0x03, /* __u8 ep_bmAttributes; Interrupt */
332 /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
333 * see hub.c:hub_configure() for details. */
334 (USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
335 0x0c /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */
336};
337
338static const u8 ss_rh_config_descriptor[] = {
339 /* one configuration */
340 0x09, /* __u8 bLength; */
341 USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
342 0x1f, 0x00, /* __le16 wTotalLength; */
343 0x01, /* __u8 bNumInterfaces; (1) */
344 0x01, /* __u8 bConfigurationValue; */
345 0x00, /* __u8 iConfiguration; */
346 0xc0, /* __u8 bmAttributes;
347 Bit 7: must be set,
348 6: Self-powered,
349 5: Remote wakeup,
350 4..0: resvd */
351 0x00, /* __u8 MaxPower; */
352
353 /* one interface */
354 0x09, /* __u8 if_bLength; */
355 USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */
356 0x00, /* __u8 if_bInterfaceNumber; */
357 0x00, /* __u8 if_bAlternateSetting; */
358 0x01, /* __u8 if_bNumEndpoints; */
359 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
360 0x00, /* __u8 if_bInterfaceSubClass; */
361 0x00, /* __u8 if_bInterfaceProtocol; */
362 0x00, /* __u8 if_iInterface; */
363
364 /* one endpoint (status change endpoint) */
365 0x07, /* __u8 ep_bLength; */
366 USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
367 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
368 0x03, /* __u8 ep_bmAttributes; Interrupt */
369 /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
370 * see hub.c:hub_configure() for details. */
371 (USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
372 0x0c, /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */
373
374 /* one SuperSpeed endpoint companion descriptor */
375 0x06, /* __u8 ss_bLength */
376 USB_DT_SS_ENDPOINT_COMP, /* __u8 ss_bDescriptorType; SuperSpeed EP */
377 /* Companion */
378 0x00, /* __u8 ss_bMaxBurst; allows 1 TX between ACKs */
379 0x00, /* __u8 ss_bmAttributes; 1 packet per service interval */
380 0x02, 0x00 /* __le16 ss_wBytesPerInterval; 15 bits for max 15 ports */
381};
382
383/* authorized_default behaviour:
384 * -1 is authorized for all devices except wireless (old behaviour)
385 * 0 is unauthorized for all devices
386 * 1 is authorized for all devices
387 */
388static int authorized_default = -1;
389module_param(authorized_default, int, S_IRUGO|S_IWUSR);
390MODULE_PARM_DESC(authorized_default,
391 "Default USB device authorization: 0 is not authorized, 1 is "
392 "authorized, -1 is authorized except for wireless USB (default, "
393 "old behaviour");
394/*-------------------------------------------------------------------------*/
395
396/**
397 * ascii2desc() - Helper routine for producing UTF-16LE string descriptors
398 * @s: Null-terminated ASCII (actually ISO-8859-1) string
399 * @buf: Buffer for USB string descriptor (header + UTF-16LE)
400 * @len: Length (in bytes; may be odd) of descriptor buffer.
401 *
402 * Return: The number of bytes filled in: 2 + 2*strlen(s) or @len,
403 * whichever is less.
404 *
405 * Note:
406 * USB String descriptors can contain at most 126 characters; input
407 * strings longer than that are truncated.
408 */
409static unsigned
410ascii2desc(char const *s, u8 *buf, unsigned len)
411{
412 unsigned n, t = 2 + 2*strlen(s);
413
414 if (t > 254)
415 t = 254; /* Longest possible UTF string descriptor */
416 if (len > t)
417 len = t;
418
419 t += USB_DT_STRING << 8; /* Now t is first 16 bits to store */
420
421 n = len;
422 while (n--) {
423 *buf++ = t;
424 if (!n--)
425 break;
426 *buf++ = t >> 8;
427 t = (unsigned char)*s++;
428 }
429 return len;
430}
431
432/**
433 * rh_string() - provides string descriptors for root hub
434 * @id: the string ID number (0: langids, 1: serial #, 2: product, 3: vendor)
435 * @hcd: the host controller for this root hub
436 * @data: buffer for output packet
437 * @len: length of the provided buffer
438 *
439 * Produces either a manufacturer, product or serial number string for the
440 * virtual root hub device.
441 *
442 * Return: The number of bytes filled in: the length of the descriptor or
443 * of the provided buffer, whichever is less.
444 */
445static unsigned
446rh_string(int id, struct usb_hcd const *hcd, u8 *data, unsigned len)
447{
448 char buf[100];
449 char const *s;
450 static char const langids[4] = {4, USB_DT_STRING, 0x09, 0x04};
451
452 /* language ids */
453 switch (id) {
454 case 0:
455 /* Array of LANGID codes (0x0409 is MSFT-speak for "en-us") */
456 /* See http://www.usb.org/developers/docs/USB_LANGIDs.pdf */
457 if (len > 4)
458 len = 4;
459 memcpy(data, langids, len);
460 return len;
461 case 1:
462 /* Serial number */
463 s = hcd->self.bus_name;
464 break;
465 case 2:
466 /* Product name */
467 s = hcd->product_desc;
468 break;
469 case 3:
470 /* Manufacturer */
471 snprintf (buf, sizeof buf, "%s %s %s", init_utsname()->sysname,
472 init_utsname()->release, hcd->driver->description);
473 s = buf;
474 break;
475 default:
476 /* Can't happen; caller guarantees it */
477 return 0;
478 }
479
480 return ascii2desc(s, data, len);
481}
482
483
484/* Root hub control transfers execute synchronously */
485static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
486{
487 struct usb_ctrlrequest *cmd;
488 u16 typeReq, wValue, wIndex, wLength;
489 u8 *ubuf = urb->transfer_buffer;
490 unsigned len = 0;
491 int status;
492 u8 patch_wakeup = 0;
493 u8 patch_protocol = 0;
494 u16 tbuf_size;
495 u8 *tbuf = NULL;
496 const u8 *bufp;
497
498 might_sleep();
499
500 spin_lock_irq(&hcd_root_hub_lock);
501 status = usb_hcd_link_urb_to_ep(hcd, urb);
502 spin_unlock_irq(&hcd_root_hub_lock);
503 if (status)
504 return status;
505 urb->hcpriv = hcd; /* Indicate it's queued */
506
507 cmd = (struct usb_ctrlrequest *) urb->setup_packet;
508 typeReq = (cmd->bRequestType << 8) | cmd->bRequest;
509 wValue = le16_to_cpu (cmd->wValue);
510 wIndex = le16_to_cpu (cmd->wIndex);
511 wLength = le16_to_cpu (cmd->wLength);
512
513 if (wLength > urb->transfer_buffer_length)
514 goto error;
515
516 /*
517 * tbuf should be at least as big as the
518 * USB hub descriptor.
519 */
520 tbuf_size = max_t(u16, sizeof(struct usb_hub_descriptor), wLength);
521 tbuf = kzalloc(tbuf_size, GFP_KERNEL);
522 if (!tbuf)
523 return -ENOMEM;
524
525 bufp = tbuf;
526
527
528 urb->actual_length = 0;
529 switch (typeReq) {
530
531 /* DEVICE REQUESTS */
532
533 /* The root hub's remote wakeup enable bit is implemented using
534 * driver model wakeup flags. If this system supports wakeup
535 * through USB, userspace may change the default "allow wakeup"
536 * policy through sysfs or these calls.
537 *
538 * Most root hubs support wakeup from downstream devices, for
539 * runtime power management (disabling USB clocks and reducing
540 * VBUS power usage). However, not all of them do so; silicon,
541 * board, and BIOS bugs here are not uncommon, so these can't
542 * be treated quite like external hubs.
543 *
544 * Likewise, not all root hubs will pass wakeup events upstream,
545 * to wake up the whole system. So don't assume root hub and
546 * controller capabilities are identical.
547 */
548
549 case DeviceRequest | USB_REQ_GET_STATUS:
550 tbuf[0] = (device_may_wakeup(&hcd->self.root_hub->dev)
551 << USB_DEVICE_REMOTE_WAKEUP)
552 | (1 << USB_DEVICE_SELF_POWERED);
553 tbuf[1] = 0;
554 len = 2;
555 break;
556 case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
557 if (wValue == USB_DEVICE_REMOTE_WAKEUP)
558 device_set_wakeup_enable(&hcd->self.root_hub->dev, 0);
559 else
560 goto error;
561 break;
562 case DeviceOutRequest | USB_REQ_SET_FEATURE:
563 if (device_can_wakeup(&hcd->self.root_hub->dev)
564 && wValue == USB_DEVICE_REMOTE_WAKEUP)
565 device_set_wakeup_enable(&hcd->self.root_hub->dev, 1);
566 else
567 goto error;
568 break;
569 case DeviceRequest | USB_REQ_GET_CONFIGURATION:
570 tbuf[0] = 1;
571 len = 1;
572 /* FALLTHROUGH */
573 case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
574 break;
575 case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
576 switch (wValue & 0xff00) {
577 case USB_DT_DEVICE << 8:
578 switch (hcd->speed) {
579 case HCD_USB31:
580 bufp = usb31_rh_dev_descriptor;
581 break;
582 case HCD_USB3:
583 bufp = usb3_rh_dev_descriptor;
584 break;
585 case HCD_USB25:
586 bufp = usb25_rh_dev_descriptor;
587 break;
588 case HCD_USB2:
589 bufp = usb2_rh_dev_descriptor;
590 break;
591 case HCD_USB11:
592 bufp = usb11_rh_dev_descriptor;
593 break;
594 default:
595 goto error;
596 }
597 len = 18;
598 if (hcd->has_tt)
599 patch_protocol = 1;
600 break;
601 case USB_DT_CONFIG << 8:
602 switch (hcd->speed) {
603 case HCD_USB31:
604 case HCD_USB3:
605 bufp = ss_rh_config_descriptor;
606 len = sizeof ss_rh_config_descriptor;
607 break;
608 case HCD_USB25:
609 case HCD_USB2:
610 bufp = hs_rh_config_descriptor;
611 len = sizeof hs_rh_config_descriptor;
612 break;
613 case HCD_USB11:
614 bufp = fs_rh_config_descriptor;
615 len = sizeof fs_rh_config_descriptor;
616 break;
617 default:
618 goto error;
619 }
620 if (device_can_wakeup(&hcd->self.root_hub->dev))
621 patch_wakeup = 1;
622 break;
623 case USB_DT_STRING << 8:
624 if ((wValue & 0xff) < 4)
625 urb->actual_length = rh_string(wValue & 0xff,
626 hcd, ubuf, wLength);
627 else /* unsupported IDs --> "protocol stall" */
628 goto error;
629 break;
630 case USB_DT_BOS << 8:
631 goto nongeneric;
632 default:
633 goto error;
634 }
635 break;
636 case DeviceRequest | USB_REQ_GET_INTERFACE:
637 tbuf[0] = 0;
638 len = 1;
639 /* FALLTHROUGH */
640 case DeviceOutRequest | USB_REQ_SET_INTERFACE:
641 break;
642 case DeviceOutRequest | USB_REQ_SET_ADDRESS:
643 /* wValue == urb->dev->devaddr */
644 dev_dbg (hcd->self.controller, "root hub device address %d\n",
645 wValue);
646 break;
647
648 /* INTERFACE REQUESTS (no defined feature/status flags) */
649
650 /* ENDPOINT REQUESTS */
651
652 case EndpointRequest | USB_REQ_GET_STATUS:
653 /* ENDPOINT_HALT flag */
654 tbuf[0] = 0;
655 tbuf[1] = 0;
656 len = 2;
657 /* FALLTHROUGH */
658 case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
659 case EndpointOutRequest | USB_REQ_SET_FEATURE:
660 dev_dbg (hcd->self.controller, "no endpoint features yet\n");
661 break;
662
663 /* CLASS REQUESTS (and errors) */
664
665 default:
666nongeneric:
667 /* non-generic request */
668 switch (typeReq) {
669 case GetHubStatus:
670 len = 4;
671 break;
672 case GetPortStatus:
673 if (wValue == HUB_PORT_STATUS)
674 len = 4;
675 else
676 /* other port status types return 8 bytes */
677 len = 8;
678 break;
679 case GetHubDescriptor:
680 len = sizeof (struct usb_hub_descriptor);
681 break;
682 case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
683 /* len is returned by hub_control */
684 break;
685 }
686 status = hcd->driver->hub_control (hcd,
687 typeReq, wValue, wIndex,
688 tbuf, wLength);
689
690 if (typeReq == GetHubDescriptor)
691 usb_hub_adjust_deviceremovable(hcd->self.root_hub,
692 (struct usb_hub_descriptor *)tbuf);
693 break;
694error:
695 /* "protocol stall" on error */
696 status = -EPIPE;
697 }
698
699 if (status < 0) {
700 len = 0;
701 if (status != -EPIPE) {
702 dev_dbg (hcd->self.controller,
703 "CTRL: TypeReq=0x%x val=0x%x "
704 "idx=0x%x len=%d ==> %d\n",
705 typeReq, wValue, wIndex,
706 wLength, status);
707 }
708 } else if (status > 0) {
709 /* hub_control may return the length of data copied. */
710 len = status;
711 status = 0;
712 }
713 if (len) {
714 if (urb->transfer_buffer_length < len)
715 len = urb->transfer_buffer_length;
716 urb->actual_length = len;
717 /* always USB_DIR_IN, toward host */
718 memcpy (ubuf, bufp, len);
719
720 /* report whether RH hardware supports remote wakeup */
721 if (patch_wakeup &&
722 len > offsetof (struct usb_config_descriptor,
723 bmAttributes))
724 ((struct usb_config_descriptor *)ubuf)->bmAttributes
725 |= USB_CONFIG_ATT_WAKEUP;
726
727 /* report whether RH hardware has an integrated TT */
728 if (patch_protocol &&
729 len > offsetof(struct usb_device_descriptor,
730 bDeviceProtocol))
731 ((struct usb_device_descriptor *) ubuf)->
732 bDeviceProtocol = USB_HUB_PR_HS_SINGLE_TT;
733 }
734
735 kfree(tbuf);
736
737 /* any errors get returned through the urb completion */
738 spin_lock_irq(&hcd_root_hub_lock);
739 usb_hcd_unlink_urb_from_ep(hcd, urb);
740 usb_hcd_giveback_urb(hcd, urb, status);
741 spin_unlock_irq(&hcd_root_hub_lock);
742 return 0;
743}
744
745/*-------------------------------------------------------------------------*/
746
747/*
748 * Root Hub interrupt transfers are polled using a timer if the
749 * driver requests it; otherwise the driver is responsible for
750 * calling usb_hcd_poll_rh_status() when an event occurs.
751 *
752 * Completions are called in_interrupt(), but they may or may not
753 * be in_irq().
754 */
755void usb_hcd_poll_rh_status(struct usb_hcd *hcd)
756{
757 struct urb *urb;
758 int length;
759 unsigned long flags;
760 char buffer[6]; /* Any root hubs with > 31 ports? */
761
762 if (unlikely(!hcd->rh_pollable))
763 return;
764 if (!hcd->uses_new_polling && !hcd->status_urb)
765 return;
766
767 length = hcd->driver->hub_status_data(hcd, buffer);
768 if (length > 0) {
769
770 /* try to complete the status urb */
771 spin_lock_irqsave(&hcd_root_hub_lock, flags);
772 urb = hcd->status_urb;
773 if (urb) {
774 clear_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);
775 hcd->status_urb = NULL;
776 urb->actual_length = length;
777 memcpy(urb->transfer_buffer, buffer, length);
778
779 usb_hcd_unlink_urb_from_ep(hcd, urb);
780 usb_hcd_giveback_urb(hcd, urb, 0);
781 } else {
782 length = 0;
783 set_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);
784 }
785 spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
786 }
787
788 /* The USB 2.0 spec says 256 ms. This is close enough and won't
789 * exceed that limit if HZ is 100. The math is more clunky than
790 * maybe expected, this is to make sure that all timers for USB devices
791 * fire at the same time to give the CPU a break in between */
792 if (hcd->uses_new_polling ? HCD_POLL_RH(hcd) :
793 (length == 0 && hcd->status_urb != NULL))
794 mod_timer (&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
795}
796EXPORT_SYMBOL_GPL(usb_hcd_poll_rh_status);
797
798/* timer callback */
799static void rh_timer_func (unsigned long _hcd)
800{
801 usb_hcd_poll_rh_status((struct usb_hcd *) _hcd);
802}
803
804/*-------------------------------------------------------------------------*/
805
806static int rh_queue_status (struct usb_hcd *hcd, struct urb *urb)
807{
808 int retval;
809 unsigned long flags;
810 unsigned len = 1 + (urb->dev->maxchild / 8);
811
812 spin_lock_irqsave (&hcd_root_hub_lock, flags);
813 if (hcd->status_urb || urb->transfer_buffer_length < len) {
814 dev_dbg (hcd->self.controller, "not queuing rh status urb\n");
815 retval = -EINVAL;
816 goto done;
817 }
818
819 retval = usb_hcd_link_urb_to_ep(hcd, urb);
820 if (retval)
821 goto done;
822
823 hcd->status_urb = urb;
824 urb->hcpriv = hcd; /* indicate it's queued */
825 if (!hcd->uses_new_polling)
826 mod_timer(&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
827
828 /* If a status change has already occurred, report it ASAP */
829 else if (HCD_POLL_PENDING(hcd))
830 mod_timer(&hcd->rh_timer, jiffies);
831 retval = 0;
832 done:
833 spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
834 return retval;
835}
836
837static int rh_urb_enqueue (struct usb_hcd *hcd, struct urb *urb)
838{
839 if (usb_endpoint_xfer_int(&urb->ep->desc))
840 return rh_queue_status (hcd, urb);
841 if (usb_endpoint_xfer_control(&urb->ep->desc))
842 return rh_call_control (hcd, urb);
843 return -EINVAL;
844}
845
846/*-------------------------------------------------------------------------*/
847
848/* Unlinks of root-hub control URBs are legal, but they don't do anything
849 * since these URBs always execute synchronously.
850 */
851static int usb_rh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
852{
853 unsigned long flags;
854 int rc;
855
856 spin_lock_irqsave(&hcd_root_hub_lock, flags);
857 rc = usb_hcd_check_unlink_urb(hcd, urb, status);
858 if (rc)
859 goto done;
860
861 if (usb_endpoint_num(&urb->ep->desc) == 0) { /* Control URB */
862 ; /* Do nothing */
863
864 } else { /* Status URB */
865 if (!hcd->uses_new_polling)
866 del_timer (&hcd->rh_timer);
867 if (urb == hcd->status_urb) {
868 hcd->status_urb = NULL;
869 usb_hcd_unlink_urb_from_ep(hcd, urb);
870 usb_hcd_giveback_urb(hcd, urb, status);
871 }
872 }
873 done:
874 spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
875 return rc;
876}
877
878
879
880/*
881 * Show & store the current value of authorized_default
882 */
883static ssize_t authorized_default_show(struct device *dev,
884 struct device_attribute *attr, char *buf)
885{
886 struct usb_device *rh_usb_dev = to_usb_device(dev);
887 struct usb_bus *usb_bus = rh_usb_dev->bus;
888 struct usb_hcd *hcd;
889
890 hcd = bus_to_hcd(usb_bus);
891 return snprintf(buf, PAGE_SIZE, "%u\n", !!HCD_DEV_AUTHORIZED(hcd));
892}
893
894static ssize_t authorized_default_store(struct device *dev,
895 struct device_attribute *attr,
896 const char *buf, size_t size)
897{
898 ssize_t result;
899 unsigned val;
900 struct usb_device *rh_usb_dev = to_usb_device(dev);
901 struct usb_bus *usb_bus = rh_usb_dev->bus;
902 struct usb_hcd *hcd;
903
904 hcd = bus_to_hcd(usb_bus);
905 result = sscanf(buf, "%u\n", &val);
906 if (result == 1) {
907 if (val)
908 set_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
909 else
910 clear_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
911
912 result = size;
913 } else {
914 result = -EINVAL;
915 }
916 return result;
917}
918static DEVICE_ATTR_RW(authorized_default);
919
920/*
921 * interface_authorized_default_show - show default authorization status
922 * for USB interfaces
923 *
924 * note: interface_authorized_default is the default value
925 * for initializing the authorized attribute of interfaces
926 */
927static ssize_t interface_authorized_default_show(struct device *dev,
928 struct device_attribute *attr, char *buf)
929{
930 struct usb_device *usb_dev = to_usb_device(dev);
931 struct usb_hcd *hcd = bus_to_hcd(usb_dev->bus);
932
933 return sprintf(buf, "%u\n", !!HCD_INTF_AUTHORIZED(hcd));
934}
935
936/*
937 * interface_authorized_default_store - store default authorization status
938 * for USB interfaces
939 *
940 * note: interface_authorized_default is the default value
941 * for initializing the authorized attribute of interfaces
942 */
943static ssize_t interface_authorized_default_store(struct device *dev,
944 struct device_attribute *attr, const char *buf, size_t count)
945{
946 struct usb_device *usb_dev = to_usb_device(dev);
947 struct usb_hcd *hcd = bus_to_hcd(usb_dev->bus);
948 int rc = count;
949 bool val;
950
951 if (strtobool(buf, &val) != 0)
952 return -EINVAL;
953
954 if (val)
955 set_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags);
956 else
957 clear_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags);
958
959 return rc;
960}
961static DEVICE_ATTR_RW(interface_authorized_default);
962
963/* Group all the USB bus attributes */
964static struct attribute *usb_bus_attrs[] = {
965 &dev_attr_authorized_default.attr,
966 &dev_attr_interface_authorized_default.attr,
967 NULL,
968};
969
970static struct attribute_group usb_bus_attr_group = {
971 .name = NULL, /* we want them in the same directory */
972 .attrs = usb_bus_attrs,
973};
974
975
976
977/*-------------------------------------------------------------------------*/
978
979/**
980 * usb_bus_init - shared initialization code
981 * @bus: the bus structure being initialized
982 *
983 * This code is used to initialize a usb_bus structure, memory for which is
984 * separately managed.
985 */
986static void usb_bus_init (struct usb_bus *bus)
987{
988 memset (&bus->devmap, 0, sizeof(struct usb_devmap));
989
990 bus->devnum_next = 1;
991
992 bus->root_hub = NULL;
993 bus->busnum = -1;
994 bus->bandwidth_allocated = 0;
995 bus->bandwidth_int_reqs = 0;
996 bus->bandwidth_isoc_reqs = 0;
997 mutex_init(&bus->usb_address0_mutex);
998}
999
1000/*-------------------------------------------------------------------------*/
1001
1002/**
1003 * usb_register_bus - registers the USB host controller with the usb core
1004 * @bus: pointer to the bus to register
1005 * Context: !in_interrupt()
1006 *
1007 * Assigns a bus number, and links the controller into usbcore data
1008 * structures so that it can be seen by scanning the bus list.
1009 *
1010 * Return: 0 if successful. A negative error code otherwise.
1011 */
1012static int usb_register_bus(struct usb_bus *bus)
1013{
1014 int result = -E2BIG;
1015 int busnum;
1016
1017 mutex_lock(&usb_bus_idr_lock);
1018 busnum = idr_alloc(&usb_bus_idr, bus, 1, USB_MAXBUS, GFP_KERNEL);
1019 if (busnum < 0) {
1020 pr_err("%s: failed to get bus number\n", usbcore_name);
1021 goto error_find_busnum;
1022 }
1023 bus->busnum = busnum;
1024 mutex_unlock(&usb_bus_idr_lock);
1025
1026 usb_notify_add_bus(bus);
1027
1028 dev_info (bus->controller, "new USB bus registered, assigned bus "
1029 "number %d\n", bus->busnum);
1030 return 0;
1031
1032error_find_busnum:
1033 mutex_unlock(&usb_bus_idr_lock);
1034 return result;
1035}
1036
1037/**
1038 * usb_deregister_bus - deregisters the USB host controller
1039 * @bus: pointer to the bus to deregister
1040 * Context: !in_interrupt()
1041 *
1042 * Recycles the bus number, and unlinks the controller from usbcore data
1043 * structures so that it won't be seen by scanning the bus list.
1044 */
1045static void usb_deregister_bus (struct usb_bus *bus)
1046{
1047 dev_info (bus->controller, "USB bus %d deregistered\n", bus->busnum);
1048
1049 /*
1050 * NOTE: make sure that all the devices are removed by the
1051 * controller code, as well as having it call this when cleaning
1052 * itself up
1053 */
1054 mutex_lock(&usb_bus_idr_lock);
1055 idr_remove(&usb_bus_idr, bus->busnum);
1056 mutex_unlock(&usb_bus_idr_lock);
1057
1058 usb_notify_remove_bus(bus);
1059}
1060
1061/**
1062 * register_root_hub - called by usb_add_hcd() to register a root hub
1063 * @hcd: host controller for this root hub
1064 *
1065 * This function registers the root hub with the USB subsystem. It sets up
1066 * the device properly in the device tree and then calls usb_new_device()
1067 * to register the usb device. It also assigns the root hub's USB address
1068 * (always 1).
1069 *
1070 * Return: 0 if successful. A negative error code otherwise.
1071 */
1072static int register_root_hub(struct usb_hcd *hcd)
1073{
1074 struct device *parent_dev = hcd->self.controller;
1075 struct usb_device *usb_dev = hcd->self.root_hub;
1076 const int devnum = 1;
1077 int retval;
1078
1079 usb_dev->devnum = devnum;
1080 usb_dev->bus->devnum_next = devnum + 1;
1081 memset (&usb_dev->bus->devmap.devicemap, 0,
1082 sizeof usb_dev->bus->devmap.devicemap);
1083 set_bit (devnum, usb_dev->bus->devmap.devicemap);
1084 usb_set_device_state(usb_dev, USB_STATE_ADDRESS);
1085
1086 mutex_lock(&usb_bus_idr_lock);
1087
1088 usb_dev->ep0.desc.wMaxPacketSize = cpu_to_le16(64);
1089 retval = usb_get_device_descriptor(usb_dev, USB_DT_DEVICE_SIZE);
1090 if (retval != sizeof usb_dev->descriptor) {
1091 mutex_unlock(&usb_bus_idr_lock);
1092 dev_dbg (parent_dev, "can't read %s device descriptor %d\n",
1093 dev_name(&usb_dev->dev), retval);
1094 return (retval < 0) ? retval : -EMSGSIZE;
1095 }
1096
1097 if (le16_to_cpu(usb_dev->descriptor.bcdUSB) >= 0x0201) {
1098 retval = usb_get_bos_descriptor(usb_dev);
1099 if (!retval) {
1100 usb_dev->lpm_capable = usb_device_supports_lpm(usb_dev);
1101 } else if (usb_dev->speed >= USB_SPEED_SUPER) {
1102 mutex_unlock(&usb_bus_idr_lock);
1103 dev_dbg(parent_dev, "can't read %s bos descriptor %d\n",
1104 dev_name(&usb_dev->dev), retval);
1105 return retval;
1106 }
1107 }
1108
1109 retval = usb_new_device (usb_dev);
1110 if (retval) {
1111 dev_err (parent_dev, "can't register root hub for %s, %d\n",
1112 dev_name(&usb_dev->dev), retval);
1113 } else {
1114 spin_lock_irq (&hcd_root_hub_lock);
1115 hcd->rh_registered = 1;
1116 spin_unlock_irq (&hcd_root_hub_lock);
1117
1118 /* Did the HC die before the root hub was registered? */
1119 if (HCD_DEAD(hcd))
1120 usb_hc_died (hcd); /* This time clean up */
1121 }
1122 mutex_unlock(&usb_bus_idr_lock);
1123
1124 return retval;
1125}
1126
1127/*
1128 * usb_hcd_start_port_resume - a root-hub port is sending a resume signal
1129 * @bus: the bus which the root hub belongs to
1130 * @portnum: the port which is being resumed
1131 *
1132 * HCDs should call this function when they know that a resume signal is
1133 * being sent to a root-hub port. The root hub will be prevented from
1134 * going into autosuspend until usb_hcd_end_port_resume() is called.
1135 *
1136 * The bus's private lock must be held by the caller.
1137 */
1138void usb_hcd_start_port_resume(struct usb_bus *bus, int portnum)
1139{
1140 unsigned bit = 1 << portnum;
1141
1142 if (!(bus->resuming_ports & bit)) {
1143 bus->resuming_ports |= bit;
1144 pm_runtime_get_noresume(&bus->root_hub->dev);
1145 }
1146}
1147EXPORT_SYMBOL_GPL(usb_hcd_start_port_resume);
1148
1149/*
1150 * usb_hcd_end_port_resume - a root-hub port has stopped sending a resume signal
1151 * @bus: the bus which the root hub belongs to
1152 * @portnum: the port which is being resumed
1153 *
1154 * HCDs should call this function when they know that a resume signal has
1155 * stopped being sent to a root-hub port. The root hub will be allowed to
1156 * autosuspend again.
1157 *
1158 * The bus's private lock must be held by the caller.
1159 */
1160void usb_hcd_end_port_resume(struct usb_bus *bus, int portnum)
1161{
1162 unsigned bit = 1 << portnum;
1163
1164 if (bus->resuming_ports & bit) {
1165 bus->resuming_ports &= ~bit;
1166 pm_runtime_put_noidle(&bus->root_hub->dev);
1167 }
1168}
1169EXPORT_SYMBOL_GPL(usb_hcd_end_port_resume);
1170
1171/*-------------------------------------------------------------------------*/
1172
1173/**
1174 * usb_calc_bus_time - approximate periodic transaction time in nanoseconds
1175 * @speed: from dev->speed; USB_SPEED_{LOW,FULL,HIGH}
1176 * @is_input: true iff the transaction sends data to the host
1177 * @isoc: true for isochronous transactions, false for interrupt ones
1178 * @bytecount: how many bytes in the transaction.
1179 *
1180 * Return: Approximate bus time in nanoseconds for a periodic transaction.
1181 *
1182 * Note:
1183 * See USB 2.0 spec section 5.11.3; only periodic transfers need to be
1184 * scheduled in software, this function is only used for such scheduling.
1185 */
1186long usb_calc_bus_time (int speed, int is_input, int isoc, int bytecount)
1187{
1188 unsigned long tmp;
1189
1190 switch (speed) {
1191 case USB_SPEED_LOW: /* INTR only */
1192 if (is_input) {
1193 tmp = (67667L * (31L + 10L * BitTime (bytecount))) / 1000L;
1194 return 64060L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp;
1195 } else {
1196 tmp = (66700L * (31L + 10L * BitTime (bytecount))) / 1000L;
1197 return 64107L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp;
1198 }
1199 case USB_SPEED_FULL: /* ISOC or INTR */
1200 if (isoc) {
1201 tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
1202 return ((is_input) ? 7268L : 6265L) + BW_HOST_DELAY + tmp;
1203 } else {
1204 tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
1205 return 9107L + BW_HOST_DELAY + tmp;
1206 }
1207 case USB_SPEED_HIGH: /* ISOC or INTR */
1208 /* FIXME adjust for input vs output */
1209 if (isoc)
1210 tmp = HS_NSECS_ISO (bytecount);
1211 else
1212 tmp = HS_NSECS (bytecount);
1213 return tmp;
1214 default:
1215 pr_debug ("%s: bogus device speed!\n", usbcore_name);
1216 return -1;
1217 }
1218}
1219EXPORT_SYMBOL_GPL(usb_calc_bus_time);
1220
1221
1222/*-------------------------------------------------------------------------*/
1223
1224/*
1225 * Generic HC operations.
1226 */
1227
1228/*-------------------------------------------------------------------------*/
1229
1230/**
1231 * usb_hcd_link_urb_to_ep - add an URB to its endpoint queue
1232 * @hcd: host controller to which @urb was submitted
1233 * @urb: URB being submitted
1234 *
1235 * Host controller drivers should call this routine in their enqueue()
1236 * method. The HCD's private spinlock must be held and interrupts must
1237 * be disabled. The actions carried out here are required for URB
1238 * submission, as well as for endpoint shutdown and for usb_kill_urb.
1239 *
1240 * Return: 0 for no error, otherwise a negative error code (in which case
1241 * the enqueue() method must fail). If no error occurs but enqueue() fails
1242 * anyway, it must call usb_hcd_unlink_urb_from_ep() before releasing
1243 * the private spinlock and returning.
1244 */
1245int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb)
1246{
1247 int rc = 0;
1248
1249 spin_lock(&hcd_urb_list_lock);
1250
1251 /* Check that the URB isn't being killed */
1252 if (unlikely(atomic_read(&urb->reject))) {
1253 rc = -EPERM;
1254 goto done;
1255 }
1256
1257 if (unlikely(!urb->ep->enabled)) {
1258 rc = -ENOENT;
1259 goto done;
1260 }
1261
1262 if (unlikely(!urb->dev->can_submit)) {
1263 rc = -EHOSTUNREACH;
1264 goto done;
1265 }
1266
1267 /*
1268 * Check the host controller's state and add the URB to the
1269 * endpoint's queue.
1270 */
1271 if (HCD_RH_RUNNING(hcd)) {
1272 urb->unlinked = 0;
1273 list_add_tail(&urb->urb_list, &urb->ep->urb_list);
1274 } else {
1275 rc = -ESHUTDOWN;
1276 goto done;
1277 }
1278 done:
1279 spin_unlock(&hcd_urb_list_lock);
1280 return rc;
1281}
1282EXPORT_SYMBOL_GPL(usb_hcd_link_urb_to_ep);
1283
1284/**
1285 * usb_hcd_check_unlink_urb - check whether an URB may be unlinked
1286 * @hcd: host controller to which @urb was submitted
1287 * @urb: URB being checked for unlinkability
1288 * @status: error code to store in @urb if the unlink succeeds
1289 *
1290 * Host controller drivers should call this routine in their dequeue()
1291 * method. The HCD's private spinlock must be held and interrupts must
1292 * be disabled. The actions carried out here are required for making
1293 * sure than an unlink is valid.
1294 *
1295 * Return: 0 for no error, otherwise a negative error code (in which case
1296 * the dequeue() method must fail). The possible error codes are:
1297 *
1298 * -EIDRM: @urb was not submitted or has already completed.
1299 * The completion function may not have been called yet.
1300 *
1301 * -EBUSY: @urb has already been unlinked.
1302 */
1303int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
1304 int status)
1305{
1306 struct list_head *tmp;
1307
1308 /* insist the urb is still queued */
1309 list_for_each(tmp, &urb->ep->urb_list) {
1310 if (tmp == &urb->urb_list)
1311 break;
1312 }
1313 if (tmp != &urb->urb_list)
1314 return -EIDRM;
1315
1316 /* Any status except -EINPROGRESS means something already started to
1317 * unlink this URB from the hardware. So there's no more work to do.
1318 */
1319 if (urb->unlinked)
1320 return -EBUSY;
1321 urb->unlinked = status;
1322 return 0;
1323}
1324EXPORT_SYMBOL_GPL(usb_hcd_check_unlink_urb);
1325
1326/**
1327 * usb_hcd_unlink_urb_from_ep - remove an URB from its endpoint queue
1328 * @hcd: host controller to which @urb was submitted
1329 * @urb: URB being unlinked
1330 *
1331 * Host controller drivers should call this routine before calling
1332 * usb_hcd_giveback_urb(). The HCD's private spinlock must be held and
1333 * interrupts must be disabled. The actions carried out here are required
1334 * for URB completion.
1335 */
1336void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb)
1337{
1338 /* clear all state linking urb to this dev (and hcd) */
1339 spin_lock(&hcd_urb_list_lock);
1340 list_del_init(&urb->urb_list);
1341 spin_unlock(&hcd_urb_list_lock);
1342}
1343EXPORT_SYMBOL_GPL(usb_hcd_unlink_urb_from_ep);
1344
1345/*
1346 * Some usb host controllers can only perform dma using a small SRAM area.
1347 * The usb core itself is however optimized for host controllers that can dma
1348 * using regular system memory - like pci devices doing bus mastering.
1349 *
1350 * To support host controllers with limited dma capabilities we provide dma
1351 * bounce buffers. This feature can be enabled using the HCD_LOCAL_MEM flag.
1352 * For this to work properly the host controller code must first use the
1353 * function dma_declare_coherent_memory() to point out which memory area
1354 * that should be used for dma allocations.
1355 *
1356 * The HCD_LOCAL_MEM flag then tells the usb code to allocate all data for
1357 * dma using dma_alloc_coherent() which in turn allocates from the memory
1358 * area pointed out with dma_declare_coherent_memory().
1359 *
1360 * So, to summarize...
1361 *
1362 * - We need "local" memory, canonical example being
1363 * a small SRAM on a discrete controller being the
1364 * only memory that the controller can read ...
1365 * (a) "normal" kernel memory is no good, and
1366 * (b) there's not enough to share
1367 *
1368 * - The only *portable* hook for such stuff in the
1369 * DMA framework is dma_declare_coherent_memory()
1370 *
1371 * - So we use that, even though the primary requirement
1372 * is that the memory be "local" (hence addressable
1373 * by that device), not "coherent".
1374 *
1375 */
1376
1377static int hcd_alloc_coherent(struct usb_bus *bus,
1378 gfp_t mem_flags, dma_addr_t *dma_handle,
1379 void **vaddr_handle, size_t size,
1380 enum dma_data_direction dir)
1381{
1382 unsigned char *vaddr;
1383
1384 if (*vaddr_handle == NULL) {
1385 WARN_ON_ONCE(1);
1386 return -EFAULT;
1387 }
1388
1389 vaddr = hcd_buffer_alloc(bus, size + sizeof(vaddr),
1390 mem_flags, dma_handle);
1391 if (!vaddr)
1392 return -ENOMEM;
1393
1394 /*
1395 * Store the virtual address of the buffer at the end
1396 * of the allocated dma buffer. The size of the buffer
1397 * may be uneven so use unaligned functions instead
1398 * of just rounding up. It makes sense to optimize for
1399 * memory footprint over access speed since the amount
1400 * of memory available for dma may be limited.
1401 */
1402 put_unaligned((unsigned long)*vaddr_handle,
1403 (unsigned long *)(vaddr + size));
1404
1405 if (dir == DMA_TO_DEVICE)
1406 memcpy(vaddr, *vaddr_handle, size);
1407
1408 *vaddr_handle = vaddr;
1409 return 0;
1410}
1411
1412static void hcd_free_coherent(struct usb_bus *bus, dma_addr_t *dma_handle,
1413 void **vaddr_handle, size_t size,
1414 enum dma_data_direction dir)
1415{
1416 unsigned char *vaddr = *vaddr_handle;
1417
1418 vaddr = (void *)get_unaligned((unsigned long *)(vaddr + size));
1419
1420 if (dir == DMA_FROM_DEVICE)
1421 memcpy(vaddr, *vaddr_handle, size);
1422
1423 hcd_buffer_free(bus, size + sizeof(vaddr), *vaddr_handle, *dma_handle);
1424
1425 *vaddr_handle = vaddr;
1426 *dma_handle = 0;
1427}
1428
1429void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *hcd, struct urb *urb)
1430{
1431 if (IS_ENABLED(CONFIG_HAS_DMA) &&
1432 (urb->transfer_flags & URB_SETUP_MAP_SINGLE))
1433 dma_unmap_single(hcd->self.controller,
1434 urb->setup_dma,
1435 sizeof(struct usb_ctrlrequest),
1436 DMA_TO_DEVICE);
1437 else if (urb->transfer_flags & URB_SETUP_MAP_LOCAL)
1438 hcd_free_coherent(urb->dev->bus,
1439 &urb->setup_dma,
1440 (void **) &urb->setup_packet,
1441 sizeof(struct usb_ctrlrequest),
1442 DMA_TO_DEVICE);
1443
1444 /* Make it safe to call this routine more than once */
1445 urb->transfer_flags &= ~(URB_SETUP_MAP_SINGLE | URB_SETUP_MAP_LOCAL);
1446}
1447EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_setup_for_dma);
1448
1449static void unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
1450{
1451 if (hcd->driver->unmap_urb_for_dma)
1452 hcd->driver->unmap_urb_for_dma(hcd, urb);
1453 else
1454 usb_hcd_unmap_urb_for_dma(hcd, urb);
1455}
1456
1457void usb_hcd_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
1458{
1459 enum dma_data_direction dir;
1460
1461 usb_hcd_unmap_urb_setup_for_dma(hcd, urb);
1462
1463 dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
1464 if (IS_ENABLED(CONFIG_HAS_DMA) &&
1465 (urb->transfer_flags & URB_DMA_MAP_SG))
1466 dma_unmap_sg(hcd->self.controller,
1467 urb->sg,
1468 urb->num_sgs,
1469 dir);
1470 else if (IS_ENABLED(CONFIG_HAS_DMA) &&
1471 (urb->transfer_flags & URB_DMA_MAP_PAGE))
1472 dma_unmap_page(hcd->self.controller,
1473 urb->transfer_dma,
1474 urb->transfer_buffer_length,
1475 dir);
1476 else if (IS_ENABLED(CONFIG_HAS_DMA) &&
1477 (urb->transfer_flags & URB_DMA_MAP_SINGLE))
1478 dma_unmap_single(hcd->self.controller,
1479 urb->transfer_dma,
1480 urb->transfer_buffer_length,
1481 dir);
1482 else if (urb->transfer_flags & URB_MAP_LOCAL)
1483 hcd_free_coherent(urb->dev->bus,
1484 &urb->transfer_dma,
1485 &urb->transfer_buffer,
1486 urb->transfer_buffer_length,
1487 dir);
1488
1489 /* Make it safe to call this routine more than once */
1490 urb->transfer_flags &= ~(URB_DMA_MAP_SG | URB_DMA_MAP_PAGE |
1491 URB_DMA_MAP_SINGLE | URB_MAP_LOCAL);
1492}
1493EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_for_dma);
1494
1495static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
1496 gfp_t mem_flags)
1497{
1498 if (hcd->driver->map_urb_for_dma)
1499 return hcd->driver->map_urb_for_dma(hcd, urb, mem_flags);
1500 else
1501 return usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
1502}
1503
1504int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
1505 gfp_t mem_flags)
1506{
1507 enum dma_data_direction dir;
1508 int ret = 0;
1509
1510 /* Map the URB's buffers for DMA access.
1511 * Lower level HCD code should use *_dma exclusively,
1512 * unless it uses pio or talks to another transport,
1513 * or uses the provided scatter gather list for bulk.
1514 */
1515
1516 if (usb_endpoint_xfer_control(&urb->ep->desc)) {
1517 if (hcd->self.uses_pio_for_control)
1518 return ret;
1519 if (IS_ENABLED(CONFIG_HAS_DMA) && hcd->self.uses_dma) {
1520 urb->setup_dma = dma_map_single(
1521 hcd->self.controller,
1522 urb->setup_packet,
1523 sizeof(struct usb_ctrlrequest),
1524 DMA_TO_DEVICE);
1525 if (dma_mapping_error(hcd->self.controller,
1526 urb->setup_dma))
1527 return -EAGAIN;
1528 urb->transfer_flags |= URB_SETUP_MAP_SINGLE;
1529 } else if (hcd->driver->flags & HCD_LOCAL_MEM) {
1530 ret = hcd_alloc_coherent(
1531 urb->dev->bus, mem_flags,
1532 &urb->setup_dma,
1533 (void **)&urb->setup_packet,
1534 sizeof(struct usb_ctrlrequest),
1535 DMA_TO_DEVICE);
1536 if (ret)
1537 return ret;
1538 urb->transfer_flags |= URB_SETUP_MAP_LOCAL;
1539 }
1540 }
1541
1542 dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
1543 if (urb->transfer_buffer_length != 0
1544 && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) {
1545 if (IS_ENABLED(CONFIG_HAS_DMA) && hcd->self.uses_dma) {
1546 if (urb->num_sgs) {
1547 int n;
1548
1549 /* We don't support sg for isoc transfers ! */
1550 if (usb_endpoint_xfer_isoc(&urb->ep->desc)) {
1551 WARN_ON(1);
1552 return -EINVAL;
1553 }
1554
1555 n = dma_map_sg(
1556 hcd->self.controller,
1557 urb->sg,
1558 urb->num_sgs,
1559 dir);
1560 if (n <= 0)
1561 ret = -EAGAIN;
1562 else
1563 urb->transfer_flags |= URB_DMA_MAP_SG;
1564 urb->num_mapped_sgs = n;
1565 if (n != urb->num_sgs)
1566 urb->transfer_flags |=
1567 URB_DMA_SG_COMBINED;
1568 } else if (urb->sg) {
1569 struct scatterlist *sg = urb->sg;
1570 urb->transfer_dma = dma_map_page(
1571 hcd->self.controller,
1572 sg_page(sg),
1573 sg->offset,
1574 urb->transfer_buffer_length,
1575 dir);
1576 if (dma_mapping_error(hcd->self.controller,
1577 urb->transfer_dma))
1578 ret = -EAGAIN;
1579 else
1580 urb->transfer_flags |= URB_DMA_MAP_PAGE;
1581 } else if (is_vmalloc_addr(urb->transfer_buffer)) {
1582 WARN_ONCE(1, "transfer buffer not dma capable\n");
1583 ret = -EAGAIN;
1584 } else {
1585 urb->transfer_dma = dma_map_single(
1586 hcd->self.controller,
1587 urb->transfer_buffer,
1588 urb->transfer_buffer_length,
1589 dir);
1590 if (dma_mapping_error(hcd->self.controller,
1591 urb->transfer_dma))
1592 ret = -EAGAIN;
1593 else
1594 urb->transfer_flags |= URB_DMA_MAP_SINGLE;
1595 }
1596 } else if (hcd->driver->flags & HCD_LOCAL_MEM) {
1597 ret = hcd_alloc_coherent(
1598 urb->dev->bus, mem_flags,
1599 &urb->transfer_dma,
1600 &urb->transfer_buffer,
1601 urb->transfer_buffer_length,
1602 dir);
1603 if (ret == 0)
1604 urb->transfer_flags |= URB_MAP_LOCAL;
1605 }
1606 if (ret && (urb->transfer_flags & (URB_SETUP_MAP_SINGLE |
1607 URB_SETUP_MAP_LOCAL)))
1608 usb_hcd_unmap_urb_for_dma(hcd, urb);
1609 }
1610 return ret;
1611}
1612EXPORT_SYMBOL_GPL(usb_hcd_map_urb_for_dma);
1613
1614/*-------------------------------------------------------------------------*/
1615
1616/* may be called in any context with a valid urb->dev usecount
1617 * caller surrenders "ownership" of urb
1618 * expects usb_submit_urb() to have sanity checked and conditioned all
1619 * inputs in the urb
1620 */
1621int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
1622{
1623 int status;
1624 struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
1625
1626 /* increment urb's reference count as part of giving it to the HCD
1627 * (which will control it). HCD guarantees that it either returns
1628 * an error or calls giveback(), but not both.
1629 */
1630 usb_get_urb(urb);
1631 atomic_inc(&urb->use_count);
1632 atomic_inc(&urb->dev->urbnum);
1633 usbmon_urb_submit(&hcd->self, urb);
1634
1635 /* NOTE requirements on root-hub callers (usbfs and the hub
1636 * driver, for now): URBs' urb->transfer_buffer must be
1637 * valid and usb_buffer_{sync,unmap}() not be needed, since
1638 * they could clobber root hub response data. Also, control
1639 * URBs must be submitted in process context with interrupts
1640 * enabled.
1641 */
1642
1643 if (is_root_hub(urb->dev)) {
1644 status = rh_urb_enqueue(hcd, urb);
1645 } else {
1646 status = map_urb_for_dma(hcd, urb, mem_flags);
1647 if (likely(status == 0)) {
1648 status = hcd->driver->urb_enqueue(hcd, urb, mem_flags);
1649 if (unlikely(status))
1650 unmap_urb_for_dma(hcd, urb);
1651 }
1652 }
1653
1654 if (unlikely(status)) {
1655 usbmon_urb_submit_error(&hcd->self, urb, status);
1656 urb->hcpriv = NULL;
1657 INIT_LIST_HEAD(&urb->urb_list);
1658 atomic_dec(&urb->use_count);
1659 atomic_dec(&urb->dev->urbnum);
1660 if (atomic_read(&urb->reject))
1661 wake_up(&usb_kill_urb_queue);
1662 usb_put_urb(urb);
1663 }
1664 return status;
1665}
1666
1667/*-------------------------------------------------------------------------*/
1668
1669/* this makes the hcd giveback() the urb more quickly, by kicking it
1670 * off hardware queues (which may take a while) and returning it as
1671 * soon as practical. we've already set up the urb's return status,
1672 * but we can't know if the callback completed already.
1673 */
1674static int unlink1(struct usb_hcd *hcd, struct urb *urb, int status)
1675{
1676 int value;
1677
1678 if (is_root_hub(urb->dev))
1679 value = usb_rh_urb_dequeue(hcd, urb, status);
1680 else {
1681
1682 /* The only reason an HCD might fail this call is if
1683 * it has not yet fully queued the urb to begin with.
1684 * Such failures should be harmless. */
1685 value = hcd->driver->urb_dequeue(hcd, urb, status);
1686 }
1687 return value;
1688}
1689
1690/*
1691 * called in any context
1692 *
1693 * caller guarantees urb won't be recycled till both unlink()
1694 * and the urb's completion function return
1695 */
1696int usb_hcd_unlink_urb (struct urb *urb, int status)
1697{
1698 struct usb_hcd *hcd;
1699 struct usb_device *udev = urb->dev;
1700 int retval = -EIDRM;
1701 unsigned long flags;
1702
1703 /* Prevent the device and bus from going away while
1704 * the unlink is carried out. If they are already gone
1705 * then urb->use_count must be 0, since disconnected
1706 * devices can't have any active URBs.
1707 */
1708 spin_lock_irqsave(&hcd_urb_unlink_lock, flags);
1709 if (atomic_read(&urb->use_count) > 0) {
1710 retval = 0;
1711 usb_get_dev(udev);
1712 }
1713 spin_unlock_irqrestore(&hcd_urb_unlink_lock, flags);
1714 if (retval == 0) {
1715 hcd = bus_to_hcd(urb->dev->bus);
1716 retval = unlink1(hcd, urb, status);
1717 if (retval == 0)
1718 retval = -EINPROGRESS;
1719 else if (retval != -EIDRM && retval != -EBUSY)
1720 dev_dbg(&udev->dev, "hcd_unlink_urb %p fail %d\n",
1721 urb, retval);
1722 usb_put_dev(udev);
1723 }
1724 return retval;
1725}
1726
1727/*-------------------------------------------------------------------------*/
1728
1729static void __usb_hcd_giveback_urb(struct urb *urb)
1730{
1731 struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
1732 struct usb_anchor *anchor = urb->anchor;
1733 int status = urb->unlinked;
1734 unsigned long flags;
1735
1736 urb->hcpriv = NULL;
1737 if (unlikely((urb->transfer_flags & URB_SHORT_NOT_OK) &&
1738 urb->actual_length < urb->transfer_buffer_length &&
1739 !status))
1740 status = -EREMOTEIO;
1741
1742 unmap_urb_for_dma(hcd, urb);
1743 usbmon_urb_complete(&hcd->self, urb, status);
1744 usb_anchor_suspend_wakeups(anchor);
1745 usb_unanchor_urb(urb);
1746 if (likely(status == 0))
1747 usb_led_activity(USB_LED_EVENT_HOST);
1748
1749 /* pass ownership to the completion handler */
1750 urb->status = status;
1751
1752 /*
1753 * We disable local IRQs here avoid possible deadlock because
1754 * drivers may call spin_lock() to hold lock which might be
1755 * acquired in one hard interrupt handler.
1756 *
1757 * The local_irq_save()/local_irq_restore() around complete()
1758 * will be removed if current USB drivers have been cleaned up
1759 * and no one may trigger the above deadlock situation when
1760 * running complete() in tasklet.
1761 */
1762 local_irq_save(flags);
1763 urb->complete(urb);
1764 local_irq_restore(flags);
1765
1766 usb_anchor_resume_wakeups(anchor);
1767 atomic_dec(&urb->use_count);
1768 if (unlikely(atomic_read(&urb->reject)))
1769 wake_up(&usb_kill_urb_queue);
1770 usb_put_urb(urb);
1771}
1772
1773static void usb_giveback_urb_bh(unsigned long param)
1774{
1775 struct giveback_urb_bh *bh = (struct giveback_urb_bh *)param;
1776 struct list_head local_list;
1777
1778 spin_lock_irq(&bh->lock);
1779 bh->running = true;
1780 restart:
1781 list_replace_init(&bh->head, &local_list);
1782 spin_unlock_irq(&bh->lock);
1783
1784 while (!list_empty(&local_list)) {
1785 struct urb *urb;
1786
1787 urb = list_entry(local_list.next, struct urb, urb_list);
1788 list_del_init(&urb->urb_list);
1789 bh->completing_ep = urb->ep;
1790 __usb_hcd_giveback_urb(urb);
1791 bh->completing_ep = NULL;
1792 }
1793
1794 /* check if there are new URBs to giveback */
1795 spin_lock_irq(&bh->lock);
1796 if (!list_empty(&bh->head))
1797 goto restart;
1798 bh->running = false;
1799 spin_unlock_irq(&bh->lock);
1800}
1801
1802/**
1803 * usb_hcd_giveback_urb - return URB from HCD to device driver
1804 * @hcd: host controller returning the URB
1805 * @urb: urb being returned to the USB device driver.
1806 * @status: completion status code for the URB.
1807 * Context: in_interrupt()
1808 *
1809 * This hands the URB from HCD to its USB device driver, using its
1810 * completion function. The HCD has freed all per-urb resources
1811 * (and is done using urb->hcpriv). It also released all HCD locks;
1812 * the device driver won't cause problems if it frees, modifies,
1813 * or resubmits this URB.
1814 *
1815 * If @urb was unlinked, the value of @status will be overridden by
1816 * @urb->unlinked. Erroneous short transfers are detected in case
1817 * the HCD hasn't checked for them.
1818 */
1819void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, int status)
1820{
1821 struct giveback_urb_bh *bh;
1822 bool running, high_prio_bh;
1823
1824 /* pass status to tasklet via unlinked */
1825 if (likely(!urb->unlinked))
1826 urb->unlinked = status;
1827
1828 if (!hcd_giveback_urb_in_bh(hcd) && !is_root_hub(urb->dev)) {
1829 __usb_hcd_giveback_urb(urb);
1830 return;
1831 }
1832
1833 if (usb_pipeisoc(urb->pipe) || usb_pipeint(urb->pipe)) {
1834 bh = &hcd->high_prio_bh;
1835 high_prio_bh = true;
1836 } else {
1837 bh = &hcd->low_prio_bh;
1838 high_prio_bh = false;
1839 }
1840
1841 spin_lock(&bh->lock);
1842 list_add_tail(&urb->urb_list, &bh->head);
1843 running = bh->running;
1844 spin_unlock(&bh->lock);
1845
1846 if (running)
1847 ;
1848 else if (high_prio_bh)
1849 tasklet_hi_schedule(&bh->bh);
1850 else
1851 tasklet_schedule(&bh->bh);
1852}
1853EXPORT_SYMBOL_GPL(usb_hcd_giveback_urb);
1854
1855/*-------------------------------------------------------------------------*/
1856
1857/* Cancel all URBs pending on this endpoint and wait for the endpoint's
1858 * queue to drain completely. The caller must first insure that no more
1859 * URBs can be submitted for this endpoint.
1860 */
1861void usb_hcd_flush_endpoint(struct usb_device *udev,
1862 struct usb_host_endpoint *ep)
1863{
1864 struct usb_hcd *hcd;
1865 struct urb *urb;
1866
1867 if (!ep)
1868 return;
1869 might_sleep();
1870 hcd = bus_to_hcd(udev->bus);
1871
1872 /* No more submits can occur */
1873 spin_lock_irq(&hcd_urb_list_lock);
1874rescan:
1875 list_for_each_entry (urb, &ep->urb_list, urb_list) {
1876 int is_in;
1877
1878 if (urb->unlinked)
1879 continue;
1880 usb_get_urb (urb);
1881 is_in = usb_urb_dir_in(urb);
1882 spin_unlock(&hcd_urb_list_lock);
1883
1884 /* kick hcd */
1885 unlink1(hcd, urb, -ESHUTDOWN);
1886 dev_dbg (hcd->self.controller,
1887 "shutdown urb %p ep%d%s%s\n",
1888 urb, usb_endpoint_num(&ep->desc),
1889 is_in ? "in" : "out",
1890 ({ char *s;
1891
1892 switch (usb_endpoint_type(&ep->desc)) {
1893 case USB_ENDPOINT_XFER_CONTROL:
1894 s = ""; break;
1895 case USB_ENDPOINT_XFER_BULK:
1896 s = "-bulk"; break;
1897 case USB_ENDPOINT_XFER_INT:
1898 s = "-intr"; break;
1899 default:
1900 s = "-iso"; break;
1901 };
1902 s;
1903 }));
1904 usb_put_urb (urb);
1905
1906 /* list contents may have changed */
1907 spin_lock(&hcd_urb_list_lock);
1908 goto rescan;
1909 }
1910 spin_unlock_irq(&hcd_urb_list_lock);
1911
1912 /* Wait until the endpoint queue is completely empty */
1913 while (!list_empty (&ep->urb_list)) {
1914 spin_lock_irq(&hcd_urb_list_lock);
1915
1916 /* The list may have changed while we acquired the spinlock */
1917 urb = NULL;
1918 if (!list_empty (&ep->urb_list)) {
1919 urb = list_entry (ep->urb_list.prev, struct urb,
1920 urb_list);
1921 usb_get_urb (urb);
1922 }
1923 spin_unlock_irq(&hcd_urb_list_lock);
1924
1925 if (urb) {
1926 usb_kill_urb (urb);
1927 usb_put_urb (urb);
1928 }
1929 }
1930}
1931
1932/**
1933 * usb_hcd_alloc_bandwidth - check whether a new bandwidth setting exceeds
1934 * the bus bandwidth
1935 * @udev: target &usb_device
1936 * @new_config: new configuration to install
1937 * @cur_alt: the current alternate interface setting
1938 * @new_alt: alternate interface setting that is being installed
1939 *
1940 * To change configurations, pass in the new configuration in new_config,
1941 * and pass NULL for cur_alt and new_alt.
1942 *
1943 * To reset a device's configuration (put the device in the ADDRESSED state),
1944 * pass in NULL for new_config, cur_alt, and new_alt.
1945 *
1946 * To change alternate interface settings, pass in NULL for new_config,
1947 * pass in the current alternate interface setting in cur_alt,
1948 * and pass in the new alternate interface setting in new_alt.
1949 *
1950 * Return: An error if the requested bandwidth change exceeds the
1951 * bus bandwidth or host controller internal resources.
1952 */
1953int usb_hcd_alloc_bandwidth(struct usb_device *udev,
1954 struct usb_host_config *new_config,
1955 struct usb_host_interface *cur_alt,
1956 struct usb_host_interface *new_alt)
1957{
1958 int num_intfs, i, j;
1959 struct usb_host_interface *alt = NULL;
1960 int ret = 0;
1961 struct usb_hcd *hcd;
1962 struct usb_host_endpoint *ep;
1963
1964 hcd = bus_to_hcd(udev->bus);
1965 if (!hcd->driver->check_bandwidth)
1966 return 0;
1967
1968 /* Configuration is being removed - set configuration 0 */
1969 if (!new_config && !cur_alt) {
1970 for (i = 1; i < 16; ++i) {
1971 ep = udev->ep_out[i];
1972 if (ep)
1973 hcd->driver->drop_endpoint(hcd, udev, ep);
1974 ep = udev->ep_in[i];
1975 if (ep)
1976 hcd->driver->drop_endpoint(hcd, udev, ep);
1977 }
1978 hcd->driver->check_bandwidth(hcd, udev);
1979 return 0;
1980 }
1981 /* Check if the HCD says there's enough bandwidth. Enable all endpoints
1982 * each interface's alt setting 0 and ask the HCD to check the bandwidth
1983 * of the bus. There will always be bandwidth for endpoint 0, so it's
1984 * ok to exclude it.
1985 */
1986 if (new_config) {
1987 num_intfs = new_config->desc.bNumInterfaces;
1988 /* Remove endpoints (except endpoint 0, which is always on the
1989 * schedule) from the old config from the schedule
1990 */
1991 for (i = 1; i < 16; ++i) {
1992 ep = udev->ep_out[i];
1993 if (ep) {
1994 ret = hcd->driver->drop_endpoint(hcd, udev, ep);
1995 if (ret < 0)
1996 goto reset;
1997 }
1998 ep = udev->ep_in[i];
1999 if (ep) {
2000 ret = hcd->driver->drop_endpoint(hcd, udev, ep);
2001 if (ret < 0)
2002 goto reset;
2003 }
2004 }
2005 for (i = 0; i < num_intfs; ++i) {
2006 struct usb_host_interface *first_alt;
2007 int iface_num;
2008
2009 first_alt = &new_config->intf_cache[i]->altsetting[0];
2010 iface_num = first_alt->desc.bInterfaceNumber;
2011 /* Set up endpoints for alternate interface setting 0 */
2012 alt = usb_find_alt_setting(new_config, iface_num, 0);
2013 if (!alt)
2014 /* No alt setting 0? Pick the first setting. */
2015 alt = first_alt;
2016
2017 for (j = 0; j < alt->desc.bNumEndpoints; j++) {
2018 ret = hcd->driver->add_endpoint(hcd, udev, &alt->endpoint[j]);
2019 if (ret < 0)
2020 goto reset;
2021 }
2022 }
2023 }
2024 if (cur_alt && new_alt) {
2025 struct usb_interface *iface = usb_ifnum_to_if(udev,
2026 cur_alt->desc.bInterfaceNumber);
2027
2028 if (!iface)
2029 return -EINVAL;
2030 if (iface->resetting_device) {
2031 /*
2032 * The USB core just reset the device, so the xHCI host
2033 * and the device will think alt setting 0 is installed.
2034 * However, the USB core will pass in the alternate
2035 * setting installed before the reset as cur_alt. Dig
2036 * out the alternate setting 0 structure, or the first
2037 * alternate setting if a broken device doesn't have alt
2038 * setting 0.
2039 */
2040 cur_alt = usb_altnum_to_altsetting(iface, 0);
2041 if (!cur_alt)
2042 cur_alt = &iface->altsetting[0];
2043 }
2044
2045 /* Drop all the endpoints in the current alt setting */
2046 for (i = 0; i < cur_alt->desc.bNumEndpoints; i++) {
2047 ret = hcd->driver->drop_endpoint(hcd, udev,
2048 &cur_alt->endpoint[i]);
2049 if (ret < 0)
2050 goto reset;
2051 }
2052 /* Add all the endpoints in the new alt setting */
2053 for (i = 0; i < new_alt->desc.bNumEndpoints; i++) {
2054 ret = hcd->driver->add_endpoint(hcd, udev,
2055 &new_alt->endpoint[i]);
2056 if (ret < 0)
2057 goto reset;
2058 }
2059 }
2060 ret = hcd->driver->check_bandwidth(hcd, udev);
2061reset:
2062 if (ret < 0)
2063 hcd->driver->reset_bandwidth(hcd, udev);
2064 return ret;
2065}
2066
2067/* Disables the endpoint: synchronizes with the hcd to make sure all
2068 * endpoint state is gone from hardware. usb_hcd_flush_endpoint() must
2069 * have been called previously. Use for set_configuration, set_interface,
2070 * driver removal, physical disconnect.
2071 *
2072 * example: a qh stored in ep->hcpriv, holding state related to endpoint
2073 * type, maxpacket size, toggle, halt status, and scheduling.
2074 */
2075void usb_hcd_disable_endpoint(struct usb_device *udev,
2076 struct usb_host_endpoint *ep)
2077{
2078 struct usb_hcd *hcd;
2079
2080 might_sleep();
2081 hcd = bus_to_hcd(udev->bus);
2082 if (hcd->driver->endpoint_disable)
2083 hcd->driver->endpoint_disable(hcd, ep);
2084}
2085
2086/**
2087 * usb_hcd_reset_endpoint - reset host endpoint state
2088 * @udev: USB device.
2089 * @ep: the endpoint to reset.
2090 *
2091 * Resets any host endpoint state such as the toggle bit, sequence
2092 * number and current window.
2093 */
2094void usb_hcd_reset_endpoint(struct usb_device *udev,
2095 struct usb_host_endpoint *ep)
2096{
2097 struct usb_hcd *hcd = bus_to_hcd(udev->bus);
2098
2099 if (hcd->driver->endpoint_reset)
2100 hcd->driver->endpoint_reset(hcd, ep);
2101 else {
2102 int epnum = usb_endpoint_num(&ep->desc);
2103 int is_out = usb_endpoint_dir_out(&ep->desc);
2104 int is_control = usb_endpoint_xfer_control(&ep->desc);
2105
2106 usb_settoggle(udev, epnum, is_out, 0);
2107 if (is_control)
2108 usb_settoggle(udev, epnum, !is_out, 0);
2109 }
2110}
2111
2112/**
2113 * usb_alloc_streams - allocate bulk endpoint stream IDs.
2114 * @interface: alternate setting that includes all endpoints.
2115 * @eps: array of endpoints that need streams.
2116 * @num_eps: number of endpoints in the array.
2117 * @num_streams: number of streams to allocate.
2118 * @mem_flags: flags hcd should use to allocate memory.
2119 *
2120 * Sets up a group of bulk endpoints to have @num_streams stream IDs available.
2121 * Drivers may queue multiple transfers to different stream IDs, which may
2122 * complete in a different order than they were queued.
2123 *
2124 * Return: On success, the number of allocated streams. On failure, a negative
2125 * error code.
2126 */
2127int usb_alloc_streams(struct usb_interface *interface,
2128 struct usb_host_endpoint **eps, unsigned int num_eps,
2129 unsigned int num_streams, gfp_t mem_flags)
2130{
2131 struct usb_hcd *hcd;
2132 struct usb_device *dev;
2133 int i, ret;
2134
2135 dev = interface_to_usbdev(interface);
2136 hcd = bus_to_hcd(dev->bus);
2137 if (!hcd->driver->alloc_streams || !hcd->driver->free_streams)
2138 return -EINVAL;
2139 if (dev->speed < USB_SPEED_SUPER)
2140 return -EINVAL;
2141 if (dev->state < USB_STATE_CONFIGURED)
2142 return -ENODEV;
2143
2144 for (i = 0; i < num_eps; i++) {
2145 /* Streams only apply to bulk endpoints. */
2146 if (!usb_endpoint_xfer_bulk(&eps[i]->desc))
2147 return -EINVAL;
2148 /* Re-alloc is not allowed */
2149 if (eps[i]->streams)
2150 return -EINVAL;
2151 }
2152
2153 ret = hcd->driver->alloc_streams(hcd, dev, eps, num_eps,
2154 num_streams, mem_flags);
2155 if (ret < 0)
2156 return ret;
2157
2158 for (i = 0; i < num_eps; i++)
2159 eps[i]->streams = ret;
2160
2161 return ret;
2162}
2163EXPORT_SYMBOL_GPL(usb_alloc_streams);
2164
2165/**
2166 * usb_free_streams - free bulk endpoint stream IDs.
2167 * @interface: alternate setting that includes all endpoints.
2168 * @eps: array of endpoints to remove streams from.
2169 * @num_eps: number of endpoints in the array.
2170 * @mem_flags: flags hcd should use to allocate memory.
2171 *
2172 * Reverts a group of bulk endpoints back to not using stream IDs.
2173 * Can fail if we are given bad arguments, or HCD is broken.
2174 *
2175 * Return: 0 on success. On failure, a negative error code.
2176 */
2177int usb_free_streams(struct usb_interface *interface,
2178 struct usb_host_endpoint **eps, unsigned int num_eps,
2179 gfp_t mem_flags)
2180{
2181 struct usb_hcd *hcd;
2182 struct usb_device *dev;
2183 int i, ret;
2184
2185 dev = interface_to_usbdev(interface);
2186 hcd = bus_to_hcd(dev->bus);
2187 if (dev->speed < USB_SPEED_SUPER)
2188 return -EINVAL;
2189
2190 /* Double-free is not allowed */
2191 for (i = 0; i < num_eps; i++)
2192 if (!eps[i] || !eps[i]->streams)
2193 return -EINVAL;
2194
2195 ret = hcd->driver->free_streams(hcd, dev, eps, num_eps, mem_flags);
2196 if (ret < 0)
2197 return ret;
2198
2199 for (i = 0; i < num_eps; i++)
2200 eps[i]->streams = 0;
2201
2202 return ret;
2203}
2204EXPORT_SYMBOL_GPL(usb_free_streams);
2205
2206/* Protect against drivers that try to unlink URBs after the device
2207 * is gone, by waiting until all unlinks for @udev are finished.
2208 * Since we don't currently track URBs by device, simply wait until
2209 * nothing is running in the locked region of usb_hcd_unlink_urb().
2210 */
2211void usb_hcd_synchronize_unlinks(struct usb_device *udev)
2212{
2213 spin_lock_irq(&hcd_urb_unlink_lock);
2214 spin_unlock_irq(&hcd_urb_unlink_lock);
2215}
2216
2217/*-------------------------------------------------------------------------*/
2218
2219/* called in any context */
2220int usb_hcd_get_frame_number (struct usb_device *udev)
2221{
2222 struct usb_hcd *hcd = bus_to_hcd(udev->bus);
2223
2224 if (!HCD_RH_RUNNING(hcd))
2225 return -ESHUTDOWN;
2226 return hcd->driver->get_frame_number (hcd);
2227}
2228
2229/*-------------------------------------------------------------------------*/
2230
2231#ifdef CONFIG_PM
2232
2233int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg)
2234{
2235 struct usb_hcd *hcd = bus_to_hcd(rhdev->bus);
2236 int status;
2237 int old_state = hcd->state;
2238
2239 dev_dbg(&rhdev->dev, "bus %ssuspend, wakeup %d\n",
2240 (PMSG_IS_AUTO(msg) ? "auto-" : ""),
2241 rhdev->do_remote_wakeup);
2242 if (HCD_DEAD(hcd)) {
2243 dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "suspend");
2244 return 0;
2245 }
2246
2247 if (!hcd->driver->bus_suspend) {
2248 status = -ENOENT;
2249 } else {
2250 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2251 hcd->state = HC_STATE_QUIESCING;
2252 status = hcd->driver->bus_suspend(hcd);
2253 }
2254 if (status == 0) {
2255 usb_set_device_state(rhdev, USB_STATE_SUSPENDED);
2256 hcd->state = HC_STATE_SUSPENDED;
2257
2258 /* Did we race with a root-hub wakeup event? */
2259 if (rhdev->do_remote_wakeup) {
2260 char buffer[6];
2261
2262 status = hcd->driver->hub_status_data(hcd, buffer);
2263 if (status != 0) {
2264 dev_dbg(&rhdev->dev, "suspend raced with wakeup event\n");
2265 hcd_bus_resume(rhdev, PMSG_AUTO_RESUME);
2266 status = -EBUSY;
2267 }
2268 }
2269 } else {
2270 spin_lock_irq(&hcd_root_hub_lock);
2271 if (!HCD_DEAD(hcd)) {
2272 set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2273 hcd->state = old_state;
2274 }
2275 spin_unlock_irq(&hcd_root_hub_lock);
2276 dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
2277 "suspend", status);
2278 }
2279 return status;
2280}
2281
2282int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
2283{
2284 struct usb_hcd *hcd = bus_to_hcd(rhdev->bus);
2285 int status;
2286 int old_state = hcd->state;
2287
2288 dev_dbg(&rhdev->dev, "usb %sresume\n",
2289 (PMSG_IS_AUTO(msg) ? "auto-" : ""));
2290 if (HCD_DEAD(hcd)) {
2291 dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "resume");
2292 return 0;
2293 }
2294 if (!hcd->driver->bus_resume)
2295 return -ENOENT;
2296 if (HCD_RH_RUNNING(hcd))
2297 return 0;
2298
2299 hcd->state = HC_STATE_RESUMING;
2300 status = hcd->driver->bus_resume(hcd);
2301 clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
2302 if (status == 0) {
2303 struct usb_device *udev;
2304 int port1;
2305
2306 spin_lock_irq(&hcd_root_hub_lock);
2307 if (!HCD_DEAD(hcd)) {
2308 usb_set_device_state(rhdev, rhdev->actconfig
2309 ? USB_STATE_CONFIGURED
2310 : USB_STATE_ADDRESS);
2311 set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2312 hcd->state = HC_STATE_RUNNING;
2313 }
2314 spin_unlock_irq(&hcd_root_hub_lock);
2315
2316 /*
2317 * Check whether any of the enabled ports on the root hub are
2318 * unsuspended. If they are then a TRSMRCY delay is needed
2319 * (this is what the USB-2 spec calls a "global resume").
2320 * Otherwise we can skip the delay.
2321 */
2322 usb_hub_for_each_child(rhdev, port1, udev) {
2323 if (udev->state != USB_STATE_NOTATTACHED &&
2324 !udev->port_is_suspended) {
2325 usleep_range(10000, 11000); /* TRSMRCY */
2326 break;
2327 }
2328 }
2329 } else {
2330 hcd->state = old_state;
2331 dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
2332 "resume", status);
2333 if (status != -ESHUTDOWN)
2334 usb_hc_died(hcd);
2335 }
2336 return status;
2337}
2338
2339/* Workqueue routine for root-hub remote wakeup */
2340static void hcd_resume_work(struct work_struct *work)
2341{
2342 struct usb_hcd *hcd = container_of(work, struct usb_hcd, wakeup_work);
2343 struct usb_device *udev = hcd->self.root_hub;
2344
2345 usb_remote_wakeup(udev);
2346}
2347
2348/**
2349 * usb_hcd_resume_root_hub - called by HCD to resume its root hub
2350 * @hcd: host controller for this root hub
2351 *
2352 * The USB host controller calls this function when its root hub is
2353 * suspended (with the remote wakeup feature enabled) and a remote
2354 * wakeup request is received. The routine submits a workqueue request
2355 * to resume the root hub (that is, manage its downstream ports again).
2356 */
2357void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
2358{
2359 unsigned long flags;
2360
2361 spin_lock_irqsave (&hcd_root_hub_lock, flags);
2362 if (hcd->rh_registered) {
2363 set_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
2364 queue_work(pm_wq, &hcd->wakeup_work);
2365 }
2366 spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
2367}
2368EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub);
2369
2370#endif /* CONFIG_PM */
2371
2372/*-------------------------------------------------------------------------*/
2373
2374#ifdef CONFIG_USB_OTG
2375
2376/**
2377 * usb_bus_start_enum - start immediate enumeration (for OTG)
2378 * @bus: the bus (must use hcd framework)
2379 * @port_num: 1-based number of port; usually bus->otg_port
2380 * Context: in_interrupt()
2381 *
2382 * Starts enumeration, with an immediate reset followed later by
2383 * hub_wq identifying and possibly configuring the device.
2384 * This is needed by OTG controller drivers, where it helps meet
2385 * HNP protocol timing requirements for starting a port reset.
2386 *
2387 * Return: 0 if successful.
2388 */
2389int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num)
2390{
2391 struct usb_hcd *hcd;
2392 int status = -EOPNOTSUPP;
2393
2394 /* NOTE: since HNP can't start by grabbing the bus's address0_sem,
2395 * boards with root hubs hooked up to internal devices (instead of
2396 * just the OTG port) may need more attention to resetting...
2397 */
2398 hcd = bus_to_hcd(bus);
2399 if (port_num && hcd->driver->start_port_reset)
2400 status = hcd->driver->start_port_reset(hcd, port_num);
2401
2402 /* allocate hub_wq shortly after (first) root port reset finishes;
2403 * it may issue others, until at least 50 msecs have passed.
2404 */
2405 if (status == 0)
2406 mod_timer(&hcd->rh_timer, jiffies + msecs_to_jiffies(10));
2407 return status;
2408}
2409EXPORT_SYMBOL_GPL(usb_bus_start_enum);
2410
2411#endif
2412
2413/*-------------------------------------------------------------------------*/
2414
2415/**
2416 * usb_hcd_irq - hook IRQs to HCD framework (bus glue)
2417 * @irq: the IRQ being raised
2418 * @__hcd: pointer to the HCD whose IRQ is being signaled
2419 *
2420 * If the controller isn't HALTed, calls the driver's irq handler.
2421 * Checks whether the controller is now dead.
2422 *
2423 * Return: %IRQ_HANDLED if the IRQ was handled. %IRQ_NONE otherwise.
2424 */
2425irqreturn_t usb_hcd_irq (int irq, void *__hcd)
2426{
2427 struct usb_hcd *hcd = __hcd;
2428 irqreturn_t rc;
2429
2430 if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd)))
2431 rc = IRQ_NONE;
2432 else if (hcd->driver->irq(hcd) == IRQ_NONE)
2433 rc = IRQ_NONE;
2434 else
2435 rc = IRQ_HANDLED;
2436
2437 return rc;
2438}
2439EXPORT_SYMBOL_GPL(usb_hcd_irq);
2440
2441/*-------------------------------------------------------------------------*/
2442
2443/**
2444 * usb_hc_died - report abnormal shutdown of a host controller (bus glue)
2445 * @hcd: pointer to the HCD representing the controller
2446 *
2447 * This is called by bus glue to report a USB host controller that died
2448 * while operations may still have been pending. It's called automatically
2449 * by the PCI glue, so only glue for non-PCI busses should need to call it.
2450 *
2451 * Only call this function with the primary HCD.
2452 */
2453void usb_hc_died (struct usb_hcd *hcd)
2454{
2455 unsigned long flags;
2456
2457 dev_err (hcd->self.controller, "HC died; cleaning up\n");
2458
2459 spin_lock_irqsave (&hcd_root_hub_lock, flags);
2460 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2461 set_bit(HCD_FLAG_DEAD, &hcd->flags);
2462 if (hcd->rh_registered) {
2463 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2464
2465 /* make hub_wq clean up old urbs and devices */
2466 usb_set_device_state (hcd->self.root_hub,
2467 USB_STATE_NOTATTACHED);
2468 usb_kick_hub_wq(hcd->self.root_hub);
2469 }
2470 if (usb_hcd_is_primary_hcd(hcd) && hcd->shared_hcd) {
2471 hcd = hcd->shared_hcd;
2472 if (hcd->rh_registered) {
2473 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2474
2475 /* make hub_wq clean up old urbs and devices */
2476 usb_set_device_state(hcd->self.root_hub,
2477 USB_STATE_NOTATTACHED);
2478 usb_kick_hub_wq(hcd->self.root_hub);
2479 }
2480 }
2481 spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
2482 /* Make sure that the other roothub is also deallocated. */
2483}
2484EXPORT_SYMBOL_GPL (usb_hc_died);
2485
2486/*-------------------------------------------------------------------------*/
2487
2488static void init_giveback_urb_bh(struct giveback_urb_bh *bh)
2489{
2490
2491 spin_lock_init(&bh->lock);
2492 INIT_LIST_HEAD(&bh->head);
2493 tasklet_init(&bh->bh, usb_giveback_urb_bh, (unsigned long)bh);
2494}
2495
2496/**
2497 * usb_create_shared_hcd - create and initialize an HCD structure
2498 * @driver: HC driver that will use this hcd
2499 * @dev: device for this HC, stored in hcd->self.controller
2500 * @bus_name: value to store in hcd->self.bus_name
2501 * @primary_hcd: a pointer to the usb_hcd structure that is sharing the
2502 * PCI device. Only allocate certain resources for the primary HCD
2503 * Context: !in_interrupt()
2504 *
2505 * Allocate a struct usb_hcd, with extra space at the end for the
2506 * HC driver's private data. Initialize the generic members of the
2507 * hcd structure.
2508 *
2509 * Return: On success, a pointer to the created and initialized HCD structure.
2510 * On failure (e.g. if memory is unavailable), %NULL.
2511 */
2512struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver,
2513 struct device *dev, const char *bus_name,
2514 struct usb_hcd *primary_hcd)
2515{
2516 struct usb_hcd *hcd;
2517
2518 hcd = kzalloc(sizeof(*hcd) + driver->hcd_priv_size, GFP_KERNEL);
2519 if (!hcd) {
2520 dev_dbg (dev, "hcd alloc failed\n");
2521 return NULL;
2522 }
2523 if (primary_hcd == NULL) {
2524 hcd->bandwidth_mutex = kmalloc(sizeof(*hcd->bandwidth_mutex),
2525 GFP_KERNEL);
2526 if (!hcd->bandwidth_mutex) {
2527 kfree(hcd);
2528 dev_dbg(dev, "hcd bandwidth mutex alloc failed\n");
2529 return NULL;
2530 }
2531 mutex_init(hcd->bandwidth_mutex);
2532 dev_set_drvdata(dev, hcd);
2533 } else {
2534 mutex_lock(&usb_port_peer_mutex);
2535 hcd->bandwidth_mutex = primary_hcd->bandwidth_mutex;
2536 hcd->primary_hcd = primary_hcd;
2537 primary_hcd->primary_hcd = primary_hcd;
2538 hcd->shared_hcd = primary_hcd;
2539 primary_hcd->shared_hcd = hcd;
2540 mutex_unlock(&usb_port_peer_mutex);
2541 }
2542
2543 kref_init(&hcd->kref);
2544
2545 usb_bus_init(&hcd->self);
2546 hcd->self.controller = dev;
2547 hcd->self.bus_name = bus_name;
2548 hcd->self.uses_dma = (dev->dma_mask != NULL);
2549
2550 init_timer(&hcd->rh_timer);
2551 hcd->rh_timer.function = rh_timer_func;
2552 hcd->rh_timer.data = (unsigned long) hcd;
2553#ifdef CONFIG_PM
2554 INIT_WORK(&hcd->wakeup_work, hcd_resume_work);
2555#endif
2556
2557 hcd->driver = driver;
2558 hcd->speed = driver->flags & HCD_MASK;
2559 hcd->product_desc = (driver->product_desc) ? driver->product_desc :
2560 "USB Host Controller";
2561 return hcd;
2562}
2563EXPORT_SYMBOL_GPL(usb_create_shared_hcd);
2564
2565/**
2566 * usb_create_hcd - create and initialize an HCD structure
2567 * @driver: HC driver that will use this hcd
2568 * @dev: device for this HC, stored in hcd->self.controller
2569 * @bus_name: value to store in hcd->self.bus_name
2570 * Context: !in_interrupt()
2571 *
2572 * Allocate a struct usb_hcd, with extra space at the end for the
2573 * HC driver's private data. Initialize the generic members of the
2574 * hcd structure.
2575 *
2576 * Return: On success, a pointer to the created and initialized HCD
2577 * structure. On failure (e.g. if memory is unavailable), %NULL.
2578 */
2579struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
2580 struct device *dev, const char *bus_name)
2581{
2582 return usb_create_shared_hcd(driver, dev, bus_name, NULL);
2583}
2584EXPORT_SYMBOL_GPL(usb_create_hcd);
2585
2586/*
2587 * Roothubs that share one PCI device must also share the bandwidth mutex.
2588 * Don't deallocate the bandwidth_mutex until the last shared usb_hcd is
2589 * deallocated.
2590 *
2591 * Make sure to only deallocate the bandwidth_mutex when the primary HCD is
2592 * freed. When hcd_release() is called for either hcd in a peer set
2593 * invalidate the peer's ->shared_hcd and ->primary_hcd pointers to
2594 * block new peering attempts
2595 */
2596static void hcd_release(struct kref *kref)
2597{
2598 struct usb_hcd *hcd = container_of (kref, struct usb_hcd, kref);
2599
2600 mutex_lock(&usb_port_peer_mutex);
2601 if (usb_hcd_is_primary_hcd(hcd))
2602 kfree(hcd->bandwidth_mutex);
2603 if (hcd->shared_hcd) {
2604 struct usb_hcd *peer = hcd->shared_hcd;
2605
2606 peer->shared_hcd = NULL;
2607 if (peer->primary_hcd == hcd)
2608 peer->primary_hcd = NULL;
2609 }
2610 mutex_unlock(&usb_port_peer_mutex);
2611 kfree(hcd);
2612}
2613
2614struct usb_hcd *usb_get_hcd (struct usb_hcd *hcd)
2615{
2616 if (hcd)
2617 kref_get (&hcd->kref);
2618 return hcd;
2619}
2620EXPORT_SYMBOL_GPL(usb_get_hcd);
2621
2622void usb_put_hcd (struct usb_hcd *hcd)
2623{
2624 if (hcd)
2625 kref_put (&hcd->kref, hcd_release);
2626}
2627EXPORT_SYMBOL_GPL(usb_put_hcd);
2628
2629int usb_hcd_is_primary_hcd(struct usb_hcd *hcd)
2630{
2631 if (!hcd->primary_hcd)
2632 return 1;
2633 return hcd == hcd->primary_hcd;
2634}
2635EXPORT_SYMBOL_GPL(usb_hcd_is_primary_hcd);
2636
2637int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1)
2638{
2639 if (!hcd->driver->find_raw_port_number)
2640 return port1;
2641
2642 return hcd->driver->find_raw_port_number(hcd, port1);
2643}
2644
2645static int usb_hcd_request_irqs(struct usb_hcd *hcd,
2646 unsigned int irqnum, unsigned long irqflags)
2647{
2648 int retval;
2649
2650 if (hcd->driver->irq) {
2651
2652 snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
2653 hcd->driver->description, hcd->self.busnum);
2654 retval = request_irq(irqnum, &usb_hcd_irq, irqflags,
2655 hcd->irq_descr, hcd);
2656 if (retval != 0) {
2657 dev_err(hcd->self.controller,
2658 "request interrupt %d failed\n",
2659 irqnum);
2660 return retval;
2661 }
2662 hcd->irq = irqnum;
2663 dev_info(hcd->self.controller, "irq %d, %s 0x%08llx\n", irqnum,
2664 (hcd->driver->flags & HCD_MEMORY) ?
2665 "io mem" : "io base",
2666 (unsigned long long)hcd->rsrc_start);
2667 } else {
2668 hcd->irq = 0;
2669 if (hcd->rsrc_start)
2670 dev_info(hcd->self.controller, "%s 0x%08llx\n",
2671 (hcd->driver->flags & HCD_MEMORY) ?
2672 "io mem" : "io base",
2673 (unsigned long long)hcd->rsrc_start);
2674 }
2675 return 0;
2676}
2677
2678/*
2679 * Before we free this root hub, flush in-flight peering attempts
2680 * and disable peer lookups
2681 */
2682static void usb_put_invalidate_rhdev(struct usb_hcd *hcd)
2683{
2684 struct usb_device *rhdev;
2685
2686 mutex_lock(&usb_port_peer_mutex);
2687 rhdev = hcd->self.root_hub;
2688 hcd->self.root_hub = NULL;
2689 mutex_unlock(&usb_port_peer_mutex);
2690 usb_put_dev(rhdev);
2691}
2692
2693/**
2694 * usb_add_hcd - finish generic HCD structure initialization and register
2695 * @hcd: the usb_hcd structure to initialize
2696 * @irqnum: Interrupt line to allocate
2697 * @irqflags: Interrupt type flags
2698 *
2699 * Finish the remaining parts of generic HCD initialization: allocate the
2700 * buffers of consistent memory, register the bus, request the IRQ line,
2701 * and call the driver's reset() and start() routines.
2702 */
2703int usb_add_hcd(struct usb_hcd *hcd,
2704 unsigned int irqnum, unsigned long irqflags)
2705{
2706 int retval;
2707 struct usb_device *rhdev;
2708
2709 if (IS_ENABLED(CONFIG_USB_PHY) && !hcd->usb_phy) {
2710 struct usb_phy *phy = usb_get_phy_dev(hcd->self.controller, 0);
2711
2712 if (IS_ERR(phy)) {
2713 retval = PTR_ERR(phy);
2714 if (retval == -EPROBE_DEFER)
2715 return retval;
2716 } else {
2717 retval = usb_phy_init(phy);
2718 if (retval) {
2719 usb_put_phy(phy);
2720 return retval;
2721 }
2722 hcd->usb_phy = phy;
2723 hcd->remove_phy = 1;
2724 }
2725 }
2726
2727 if (IS_ENABLED(CONFIG_GENERIC_PHY) && !hcd->phy) {
2728 struct phy *phy = phy_get(hcd->self.controller, "usb");
2729
2730 if (IS_ERR(phy)) {
2731 retval = PTR_ERR(phy);
2732 if (retval == -EPROBE_DEFER)
2733 goto err_phy;
2734 } else {
2735 retval = phy_init(phy);
2736 if (retval) {
2737 phy_put(phy);
2738 goto err_phy;
2739 }
2740 retval = phy_power_on(phy);
2741 if (retval) {
2742 phy_exit(phy);
2743 phy_put(phy);
2744 goto err_phy;
2745 }
2746 hcd->phy = phy;
2747 hcd->remove_phy = 1;
2748 }
2749 }
2750
2751 dev_info(hcd->self.controller, "%s\n", hcd->product_desc);
2752
2753 /* Keep old behaviour if authorized_default is not in [0, 1]. */
2754 if (authorized_default < 0 || authorized_default > 1) {
2755 if (hcd->wireless)
2756 clear_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
2757 else
2758 set_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
2759 } else {
2760 if (authorized_default)
2761 set_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
2762 else
2763 clear_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
2764 }
2765 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
2766
2767 /* per default all interfaces are authorized */
2768 set_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags);
2769
2770 /* HC is in reset state, but accessible. Now do the one-time init,
2771 * bottom up so that hcds can customize the root hubs before hub_wq
2772 * starts talking to them. (Note, bus id is assigned early too.)
2773 */
2774 retval = hcd_buffer_create(hcd);
2775 if (retval != 0) {
2776 dev_dbg(hcd->self.controller, "pool alloc failed\n");
2777 goto err_create_buf;
2778 }
2779
2780 retval = usb_register_bus(&hcd->self);
2781 if (retval < 0)
2782 goto err_register_bus;
2783
2784 rhdev = usb_alloc_dev(NULL, &hcd->self, 0);
2785 if (rhdev == NULL) {
2786 dev_err(hcd->self.controller, "unable to allocate root hub\n");
2787 retval = -ENOMEM;
2788 goto err_allocate_root_hub;
2789 }
2790 mutex_lock(&usb_port_peer_mutex);
2791 hcd->self.root_hub = rhdev;
2792 mutex_unlock(&usb_port_peer_mutex);
2793
2794 switch (hcd->speed) {
2795 case HCD_USB11:
2796 rhdev->speed = USB_SPEED_FULL;
2797 break;
2798 case HCD_USB2:
2799 rhdev->speed = USB_SPEED_HIGH;
2800 break;
2801 case HCD_USB25:
2802 rhdev->speed = USB_SPEED_WIRELESS;
2803 break;
2804 case HCD_USB3:
2805 rhdev->speed = USB_SPEED_SUPER;
2806 break;
2807 case HCD_USB31:
2808 rhdev->speed = USB_SPEED_SUPER_PLUS;
2809 break;
2810 default:
2811 retval = -EINVAL;
2812 goto err_set_rh_speed;
2813 }
2814
2815 /* wakeup flag init defaults to "everything works" for root hubs,
2816 * but drivers can override it in reset() if needed, along with
2817 * recording the overall controller's system wakeup capability.
2818 */
2819 device_set_wakeup_capable(&rhdev->dev, 1);
2820
2821 /* HCD_FLAG_RH_RUNNING doesn't matter until the root hub is
2822 * registered. But since the controller can die at any time,
2823 * let's initialize the flag before touching the hardware.
2824 */
2825 set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2826
2827 /* "reset" is misnamed; its role is now one-time init. the controller
2828 * should already have been reset (and boot firmware kicked off etc).
2829 */
2830 if (hcd->driver->reset) {
2831 retval = hcd->driver->reset(hcd);
2832 if (retval < 0) {
2833 dev_err(hcd->self.controller, "can't setup: %d\n",
2834 retval);
2835 goto err_hcd_driver_setup;
2836 }
2837 }
2838 hcd->rh_pollable = 1;
2839
2840 /* NOTE: root hub and controller capabilities may not be the same */
2841 if (device_can_wakeup(hcd->self.controller)
2842 && device_can_wakeup(&hcd->self.root_hub->dev))
2843 dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
2844
2845 /* initialize tasklets */
2846 init_giveback_urb_bh(&hcd->high_prio_bh);
2847 init_giveback_urb_bh(&hcd->low_prio_bh);
2848
2849 /* enable irqs just before we start the controller,
2850 * if the BIOS provides legacy PCI irqs.
2851 */
2852 if (usb_hcd_is_primary_hcd(hcd) && irqnum) {
2853 retval = usb_hcd_request_irqs(hcd, irqnum, irqflags);
2854 if (retval)
2855 goto err_request_irq;
2856 }
2857
2858 hcd->state = HC_STATE_RUNNING;
2859 retval = hcd->driver->start(hcd);
2860 if (retval < 0) {
2861 dev_err(hcd->self.controller, "startup error %d\n", retval);
2862 goto err_hcd_driver_start;
2863 }
2864
2865 /* starting here, usbcore will pay attention to this root hub */
2866 retval = register_root_hub(hcd);
2867 if (retval != 0)
2868 goto err_register_root_hub;
2869
2870 retval = sysfs_create_group(&rhdev->dev.kobj, &usb_bus_attr_group);
2871 if (retval < 0) {
2872 printk(KERN_ERR "Cannot register USB bus sysfs attributes: %d\n",
2873 retval);
2874 goto error_create_attr_group;
2875 }
2876 if (hcd->uses_new_polling && HCD_POLL_RH(hcd))
2877 usb_hcd_poll_rh_status(hcd);
2878
2879 return retval;
2880
2881error_create_attr_group:
2882 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2883 if (HC_IS_RUNNING(hcd->state))
2884 hcd->state = HC_STATE_QUIESCING;
2885 spin_lock_irq(&hcd_root_hub_lock);
2886 hcd->rh_registered = 0;
2887 spin_unlock_irq(&hcd_root_hub_lock);
2888
2889#ifdef CONFIG_PM
2890 cancel_work_sync(&hcd->wakeup_work);
2891#endif
2892 mutex_lock(&usb_bus_idr_lock);
2893 usb_disconnect(&rhdev); /* Sets rhdev to NULL */
2894 mutex_unlock(&usb_bus_idr_lock);
2895err_register_root_hub:
2896 hcd->rh_pollable = 0;
2897 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2898 del_timer_sync(&hcd->rh_timer);
2899 hcd->driver->stop(hcd);
2900 hcd->state = HC_STATE_HALT;
2901 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2902 del_timer_sync(&hcd->rh_timer);
2903err_hcd_driver_start:
2904 if (usb_hcd_is_primary_hcd(hcd) && hcd->irq > 0)
2905 free_irq(irqnum, hcd);
2906err_request_irq:
2907err_hcd_driver_setup:
2908err_set_rh_speed:
2909 usb_put_invalidate_rhdev(hcd);
2910err_allocate_root_hub:
2911 usb_deregister_bus(&hcd->self);
2912err_register_bus:
2913 hcd_buffer_destroy(hcd);
2914err_create_buf:
2915 if (IS_ENABLED(CONFIG_GENERIC_PHY) && hcd->remove_phy && hcd->phy) {
2916 phy_power_off(hcd->phy);
2917 phy_exit(hcd->phy);
2918 phy_put(hcd->phy);
2919 hcd->phy = NULL;
2920 }
2921err_phy:
2922 if (hcd->remove_phy && hcd->usb_phy) {
2923 usb_phy_shutdown(hcd->usb_phy);
2924 usb_put_phy(hcd->usb_phy);
2925 hcd->usb_phy = NULL;
2926 }
2927 return retval;
2928}
2929EXPORT_SYMBOL_GPL(usb_add_hcd);
2930
2931/**
2932 * usb_remove_hcd - shutdown processing for generic HCDs
2933 * @hcd: the usb_hcd structure to remove
2934 * Context: !in_interrupt()
2935 *
2936 * Disconnects the root hub, then reverses the effects of usb_add_hcd(),
2937 * invoking the HCD's stop() method.
2938 */
2939void usb_remove_hcd(struct usb_hcd *hcd)
2940{
2941 struct usb_device *rhdev = hcd->self.root_hub;
2942
2943 dev_info(hcd->self.controller, "remove, state %x\n", hcd->state);
2944
2945 usb_get_dev(rhdev);
2946 sysfs_remove_group(&rhdev->dev.kobj, &usb_bus_attr_group);
2947
2948 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2949 if (HC_IS_RUNNING (hcd->state))
2950 hcd->state = HC_STATE_QUIESCING;
2951
2952 dev_dbg(hcd->self.controller, "roothub graceful disconnect\n");
2953 spin_lock_irq (&hcd_root_hub_lock);
2954 hcd->rh_registered = 0;
2955 spin_unlock_irq (&hcd_root_hub_lock);
2956
2957#ifdef CONFIG_PM
2958 cancel_work_sync(&hcd->wakeup_work);
2959#endif
2960
2961 mutex_lock(&usb_bus_idr_lock);
2962 usb_disconnect(&rhdev); /* Sets rhdev to NULL */
2963 mutex_unlock(&usb_bus_idr_lock);
2964
2965 /*
2966 * tasklet_kill() isn't needed here because:
2967 * - driver's disconnect() called from usb_disconnect() should
2968 * make sure its URBs are completed during the disconnect()
2969 * callback
2970 *
2971 * - it is too late to run complete() here since driver may have
2972 * been removed already now
2973 */
2974
2975 /* Prevent any more root-hub status calls from the timer.
2976 * The HCD might still restart the timer (if a port status change
2977 * interrupt occurs), but usb_hcd_poll_rh_status() won't invoke
2978 * the hub_status_data() callback.
2979 */
2980 hcd->rh_pollable = 0;
2981 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2982 del_timer_sync(&hcd->rh_timer);
2983
2984 hcd->driver->stop(hcd);
2985 hcd->state = HC_STATE_HALT;
2986
2987 /* In case the HCD restarted the timer, stop it again. */
2988 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2989 del_timer_sync(&hcd->rh_timer);
2990
2991 if (usb_hcd_is_primary_hcd(hcd)) {
2992 if (hcd->irq > 0)
2993 free_irq(hcd->irq, hcd);
2994 }
2995
2996 usb_deregister_bus(&hcd->self);
2997 hcd_buffer_destroy(hcd);
2998
2999 if (IS_ENABLED(CONFIG_GENERIC_PHY) && hcd->remove_phy && hcd->phy) {
3000 phy_power_off(hcd->phy);
3001 phy_exit(hcd->phy);
3002 phy_put(hcd->phy);
3003 hcd->phy = NULL;
3004 }
3005 if (hcd->remove_phy && hcd->usb_phy) {
3006 usb_phy_shutdown(hcd->usb_phy);
3007 usb_put_phy(hcd->usb_phy);
3008 hcd->usb_phy = NULL;
3009 }
3010
3011 usb_put_invalidate_rhdev(hcd);
3012}
3013EXPORT_SYMBOL_GPL(usb_remove_hcd);
3014
3015void
3016usb_hcd_platform_shutdown(struct platform_device *dev)
3017{
3018 struct usb_hcd *hcd = platform_get_drvdata(dev);
3019
3020 if (hcd->driver->shutdown)
3021 hcd->driver->shutdown(hcd);
3022}
3023EXPORT_SYMBOL_GPL(usb_hcd_platform_shutdown);
3024
3025/*-------------------------------------------------------------------------*/
3026
3027#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
3028
3029const struct usb_mon_operations *mon_ops;
3030
3031/*
3032 * The registration is unlocked.
3033 * We do it this way because we do not want to lock in hot paths.
3034 *
3035 * Notice that the code is minimally error-proof. Because usbmon needs
3036 * symbols from usbcore, usbcore gets referenced and cannot be unloaded first.
3037 */
3038
3039int usb_mon_register(const struct usb_mon_operations *ops)
3040{
3041
3042 if (mon_ops)
3043 return -EBUSY;
3044
3045 mon_ops = ops;
3046 mb();
3047 return 0;
3048}
3049EXPORT_SYMBOL_GPL (usb_mon_register);
3050
3051void usb_mon_deregister (void)
3052{
3053
3054 if (mon_ops == NULL) {
3055 printk(KERN_ERR "USB: monitor was not registered\n");
3056 return;
3057 }
3058 mon_ops = NULL;
3059 mb();
3060}
3061EXPORT_SYMBOL_GPL (usb_mon_deregister);
3062
3063#endif /* CONFIG_USB_MON || CONFIG_USB_MON_MODULE */