Loading...
1/*======================================================================
2
3 A driver for the Qlogic SCSI card
4
5 qlogic_cs.c 1.79 2000/06/12 21:27:26
6
7 The contents of this file are subject to the Mozilla Public
8 License Version 1.1 (the "License"); you may not use this file
9 except in compliance with the License. You may obtain a copy of
10 the License at http://www.mozilla.org/MPL/
11
12 Software distributed under the License is distributed on an "AS
13 IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
14 implied. See the License for the specific language governing
15 rights and limitations under the License.
16
17 The initial developer of the original code is David A. Hinds
18 <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
19 are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
20
21 Alternatively, the contents of this file may be used under the
22 terms of the GNU General Public License version 2 (the "GPL"), in which
23 case the provisions of the GPL are applicable instead of the
24 above. If you wish to allow the use of your version of this file
25 only under the terms of the GPL and not to allow others to use
26 your version of this file under the MPL, indicate your decision
27 by deleting the provisions above and replace them with the notice
28 and other provisions required by the GPL. If you do not delete
29 the provisions above, a recipient may use your version of this
30 file under either the MPL or the GPL.
31
32======================================================================*/
33
34#include <linux/module.h>
35#include <linux/init.h>
36#include <linux/kernel.h>
37#include <linux/slab.h>
38#include <linux/string.h>
39#include <linux/ioport.h>
40#include <asm/io.h>
41#include <scsi/scsi.h>
42#include <linux/major.h>
43#include <linux/blkdev.h>
44#include <scsi/scsi_ioctl.h>
45#include <linux/interrupt.h>
46
47#include "scsi.h"
48#include <scsi/scsi_host.h>
49#include "../qlogicfas408.h"
50
51#include <pcmcia/cistpl.h>
52#include <pcmcia/ds.h>
53#include <pcmcia/ciscode.h>
54
55/* Set the following to 2 to use normal interrupt (active high/totempole-
56 * tristate), otherwise use 0 (REQUIRED FOR PCMCIA) for active low, open
57 * drain
58 */
59#define INT_TYPE 0
60
61static char qlogic_name[] = "qlogic_cs";
62
63static struct scsi_host_template qlogicfas_driver_template = {
64 .module = THIS_MODULE,
65 .name = qlogic_name,
66 .proc_name = qlogic_name,
67 .info = qlogicfas408_info,
68 .queuecommand = qlogicfas408_queuecommand,
69 .eh_abort_handler = qlogicfas408_abort,
70 .eh_bus_reset_handler = qlogicfas408_bus_reset,
71 .bios_param = qlogicfas408_biosparam,
72 .can_queue = 1,
73 .this_id = -1,
74 .sg_tablesize = SG_ALL,
75 .cmd_per_lun = 1,
76 .use_clustering = DISABLE_CLUSTERING,
77};
78
79/*====================================================================*/
80
81typedef struct scsi_info_t {
82 struct pcmcia_device *p_dev;
83 struct Scsi_Host *host;
84 unsigned short manf_id;
85} scsi_info_t;
86
87static void qlogic_release(struct pcmcia_device *link);
88static void qlogic_detach(struct pcmcia_device *p_dev);
89static int qlogic_config(struct pcmcia_device * link);
90
91static struct Scsi_Host *qlogic_detect(struct scsi_host_template *host,
92 struct pcmcia_device *link, int qbase, int qlirq)
93{
94 int qltyp; /* type of chip */
95 int qinitid;
96 struct Scsi_Host *shost; /* registered host structure */
97 struct qlogicfas408_priv *priv;
98
99 qltyp = qlogicfas408_get_chip_type(qbase, INT_TYPE);
100 qinitid = host->this_id;
101 if (qinitid < 0)
102 qinitid = 7; /* if no ID, use 7 */
103
104 qlogicfas408_setup(qbase, qinitid, INT_TYPE);
105
106 host->name = qlogic_name;
107 shost = scsi_host_alloc(host, sizeof(struct qlogicfas408_priv));
108 if (!shost)
109 goto err;
110 shost->io_port = qbase;
111 shost->n_io_port = 16;
112 shost->dma_channel = -1;
113 if (qlirq != -1)
114 shost->irq = qlirq;
115
116 priv = get_priv_by_host(shost);
117 priv->qlirq = qlirq;
118 priv->qbase = qbase;
119 priv->qinitid = qinitid;
120 priv->shost = shost;
121 priv->int_type = INT_TYPE;
122
123 if (request_irq(qlirq, qlogicfas408_ihandl, 0, qlogic_name, shost))
124 goto free_scsi_host;
125
126 sprintf(priv->qinfo,
127 "Qlogicfas Driver version 0.46, chip %02X at %03X, IRQ %d, TPdma:%d",
128 qltyp, qbase, qlirq, QL_TURBO_PDMA);
129
130 if (scsi_add_host(shost, NULL))
131 goto free_interrupt;
132
133 scsi_scan_host(shost);
134
135 return shost;
136
137free_interrupt:
138 free_irq(qlirq, shost);
139
140free_scsi_host:
141 scsi_host_put(shost);
142
143err:
144 return NULL;
145}
146static int qlogic_probe(struct pcmcia_device *link)
147{
148 scsi_info_t *info;
149
150 dev_dbg(&link->dev, "qlogic_attach()\n");
151
152 /* Create new SCSI device */
153 info = kzalloc(sizeof(*info), GFP_KERNEL);
154 if (!info)
155 return -ENOMEM;
156 info->p_dev = link;
157 link->priv = info;
158 link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
159 link->config_regs = PRESENT_OPTION;
160
161 return qlogic_config(link);
162} /* qlogic_attach */
163
164/*====================================================================*/
165
166static void qlogic_detach(struct pcmcia_device *link)
167{
168 dev_dbg(&link->dev, "qlogic_detach\n");
169
170 qlogic_release(link);
171 kfree(link->priv);
172
173} /* qlogic_detach */
174
175/*====================================================================*/
176
177static int qlogic_config_check(struct pcmcia_device *p_dev, void *priv_data)
178{
179 p_dev->io_lines = 10;
180 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
181 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
182
183 if (p_dev->resource[0]->start == 0)
184 return -ENODEV;
185
186 return pcmcia_request_io(p_dev);
187}
188
189static int qlogic_config(struct pcmcia_device * link)
190{
191 scsi_info_t *info = link->priv;
192 int ret;
193 struct Scsi_Host *host;
194
195 dev_dbg(&link->dev, "qlogic_config\n");
196
197 ret = pcmcia_loop_config(link, qlogic_config_check, NULL);
198 if (ret)
199 goto failed;
200
201 if (!link->irq)
202 goto failed;
203
204 ret = pcmcia_enable_device(link);
205 if (ret)
206 goto failed;
207
208 if ((info->manf_id == MANFID_MACNICA) || (info->manf_id == MANFID_PIONEER) || (info->manf_id == 0x0098)) {
209 /* set ATAcmd */
210 outb(0xb4, link->resource[0]->start + 0xd);
211 outb(0x24, link->resource[0]->start + 0x9);
212 outb(0x04, link->resource[0]->start + 0xd);
213 }
214
215 /* The KXL-810AN has a bigger IO port window */
216 if (resource_size(link->resource[0]) == 32)
217 host = qlogic_detect(&qlogicfas_driver_template, link,
218 link->resource[0]->start + 16, link->irq);
219 else
220 host = qlogic_detect(&qlogicfas_driver_template, link,
221 link->resource[0]->start, link->irq);
222
223 if (!host) {
224 printk(KERN_INFO "%s: no SCSI devices found\n", qlogic_name);
225 goto failed;
226 }
227
228 info->host = host;
229
230 return 0;
231
232failed:
233 pcmcia_disable_device(link);
234 return -ENODEV;
235} /* qlogic_config */
236
237/*====================================================================*/
238
239static void qlogic_release(struct pcmcia_device *link)
240{
241 scsi_info_t *info = link->priv;
242
243 dev_dbg(&link->dev, "qlogic_release\n");
244
245 scsi_remove_host(info->host);
246
247 free_irq(link->irq, info->host);
248 pcmcia_disable_device(link);
249
250 scsi_host_put(info->host);
251}
252
253/*====================================================================*/
254
255static int qlogic_resume(struct pcmcia_device *link)
256{
257 scsi_info_t *info = link->priv;
258
259 pcmcia_enable_device(link);
260 if ((info->manf_id == MANFID_MACNICA) ||
261 (info->manf_id == MANFID_PIONEER) ||
262 (info->manf_id == 0x0098)) {
263 outb(0x80, link->resource[0]->start + 0xd);
264 outb(0x24, link->resource[0]->start + 0x9);
265 outb(0x04, link->resource[0]->start + 0xd);
266 }
267 /* Ugggglllyyyy!!! */
268 qlogicfas408_bus_reset(NULL);
269
270 return 0;
271}
272
273static const struct pcmcia_device_id qlogic_ids[] = {
274 PCMCIA_DEVICE_PROD_ID12("EIger Labs", "PCMCIA-to-SCSI Adapter", 0x88395fa7, 0x33b7a5e6),
275 PCMCIA_DEVICE_PROD_ID12("EPSON", "SCSI-2 PC Card SC200", 0xd361772f, 0x299d1751),
276 PCMCIA_DEVICE_PROD_ID12("MACNICA", "MIRACLE SCSI-II mPS110", 0x20841b68, 0xab3c3b6d),
277 PCMCIA_DEVICE_PROD_ID12("MIDORI ELECTRONICS ", "CN-SC43", 0x6534382a, 0xd67eee79),
278 PCMCIA_DEVICE_PROD_ID12("NEC", "PC-9801N-J03R", 0x18df0ba0, 0x24662e8a),
279 PCMCIA_DEVICE_PROD_ID12("KME ", "KXLC003", 0x82375a27, 0xf68e5bf7),
280 PCMCIA_DEVICE_PROD_ID12("KME ", "KXLC004", 0x82375a27, 0x68eace54),
281 PCMCIA_DEVICE_PROD_ID12("KME", "KXLC101", 0x3faee676, 0x194250ec),
282 PCMCIA_DEVICE_PROD_ID12("QLOGIC CORPORATION", "pc05", 0xd77b2930, 0xa85b2735),
283 PCMCIA_DEVICE_PROD_ID12("QLOGIC CORPORATION", "pc05 rev 1.10", 0xd77b2930, 0x70f8b5f8),
284 PCMCIA_DEVICE_PROD_ID123("KME", "KXLC002", "00", 0x3faee676, 0x81896b61, 0xf99f065f),
285 PCMCIA_DEVICE_PROD_ID12("RATOC System Inc.", "SCSI2 CARD 37", 0x85c10e17, 0x1a2640c1),
286 PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "SCSC200A PC CARD SCSI", 0xb4585a1a, 0xa6f06ebe),
287 PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "SCSC200B PC CARD SCSI-10", 0xb4585a1a, 0x0a88dea0),
288 /* these conflict with other cards! */
289 /* PCMCIA_DEVICE_PROD_ID123("MACNICA", "MIRACLE SCSI", "mPS100", 0x20841b68, 0xf8dedaeb, 0x89f7fafb), */
290 /* PCMCIA_DEVICE_PROD_ID123("MACNICA", "MIRACLE SCSI", "mPS100", 0x20841b68, 0xf8dedaeb, 0x89f7fafb), */
291 PCMCIA_DEVICE_NULL,
292};
293MODULE_DEVICE_TABLE(pcmcia, qlogic_ids);
294
295static struct pcmcia_driver qlogic_cs_driver = {
296 .owner = THIS_MODULE,
297 .name = "qlogic_cs",
298 .probe = qlogic_probe,
299 .remove = qlogic_detach,
300 .id_table = qlogic_ids,
301 .resume = qlogic_resume,
302};
303
304static int __init init_qlogic_cs(void)
305{
306 return pcmcia_register_driver(&qlogic_cs_driver);
307}
308
309static void __exit exit_qlogic_cs(void)
310{
311 pcmcia_unregister_driver(&qlogic_cs_driver);
312}
313
314MODULE_AUTHOR("Tom Zerucha, Michael Griffith");
315MODULE_DESCRIPTION("Driver for the PCMCIA Qlogic FAS SCSI controllers");
316MODULE_LICENSE("GPL");
317module_init(init_qlogic_cs);
318module_exit(exit_qlogic_cs);
1/*======================================================================
2
3 A driver for the Qlogic SCSI card
4
5 qlogic_cs.c 1.79 2000/06/12 21:27:26
6
7 The contents of this file are subject to the Mozilla Public
8 License Version 1.1 (the "License"); you may not use this file
9 except in compliance with the License. You may obtain a copy of
10 the License at http://www.mozilla.org/MPL/
11
12 Software distributed under the License is distributed on an "AS
13 IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
14 implied. See the License for the specific language governing
15 rights and limitations under the License.
16
17 The initial developer of the original code is David A. Hinds
18 <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
19 are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
20
21 Alternatively, the contents of this file may be used under the
22 terms of the GNU General Public License version 2 (the "GPL"), in which
23 case the provisions of the GPL are applicable instead of the
24 above. If you wish to allow the use of your version of this file
25 only under the terms of the GPL and not to allow others to use
26 your version of this file under the MPL, indicate your decision
27 by deleting the provisions above and replace them with the notice
28 and other provisions required by the GPL. If you do not delete
29 the provisions above, a recipient may use your version of this
30 file under either the MPL or the GPL.
31
32======================================================================*/
33
34#include <linux/module.h>
35#include <linux/init.h>
36#include <linux/kernel.h>
37#include <linux/slab.h>
38#include <linux/string.h>
39#include <linux/ioport.h>
40#include <asm/io.h>
41#include <scsi/scsi.h>
42#include <linux/major.h>
43#include <linux/blkdev.h>
44#include <scsi/scsi_ioctl.h>
45#include <linux/interrupt.h>
46
47#include "scsi.h"
48#include <scsi/scsi_host.h>
49#include "../qlogicfas408.h"
50
51#include <pcmcia/cistpl.h>
52#include <pcmcia/ds.h>
53#include <pcmcia/ciscode.h>
54
55/* Set the following to 2 to use normal interrupt (active high/totempole-
56 * tristate), otherwise use 0 (REQUIRED FOR PCMCIA) for active low, open
57 * drain
58 */
59#define INT_TYPE 0
60
61static char qlogic_name[] = "qlogic_cs";
62
63static struct scsi_host_template qlogicfas_driver_template = {
64 .module = THIS_MODULE,
65 .name = qlogic_name,
66 .proc_name = qlogic_name,
67 .info = qlogicfas408_info,
68 .queuecommand = qlogicfas408_queuecommand,
69 .eh_abort_handler = qlogicfas408_abort,
70 .eh_bus_reset_handler = qlogicfas408_bus_reset,
71 .bios_param = qlogicfas408_biosparam,
72 .can_queue = 1,
73 .this_id = -1,
74 .sg_tablesize = SG_ALL,
75 .use_clustering = DISABLE_CLUSTERING,
76};
77
78/*====================================================================*/
79
80typedef struct scsi_info_t {
81 struct pcmcia_device *p_dev;
82 struct Scsi_Host *host;
83 unsigned short manf_id;
84} scsi_info_t;
85
86static void qlogic_release(struct pcmcia_device *link);
87static void qlogic_detach(struct pcmcia_device *p_dev);
88static int qlogic_config(struct pcmcia_device * link);
89
90static struct Scsi_Host *qlogic_detect(struct scsi_host_template *host,
91 struct pcmcia_device *link, int qbase, int qlirq)
92{
93 int qltyp; /* type of chip */
94 int qinitid;
95 struct Scsi_Host *shost; /* registered host structure */
96 struct qlogicfas408_priv *priv;
97
98 qltyp = qlogicfas408_get_chip_type(qbase, INT_TYPE);
99 qinitid = host->this_id;
100 if (qinitid < 0)
101 qinitid = 7; /* if no ID, use 7 */
102
103 qlogicfas408_setup(qbase, qinitid, INT_TYPE);
104
105 host->name = qlogic_name;
106 shost = scsi_host_alloc(host, sizeof(struct qlogicfas408_priv));
107 if (!shost)
108 goto err;
109 shost->io_port = qbase;
110 shost->n_io_port = 16;
111 shost->dma_channel = -1;
112 if (qlirq != -1)
113 shost->irq = qlirq;
114
115 priv = get_priv_by_host(shost);
116 priv->qlirq = qlirq;
117 priv->qbase = qbase;
118 priv->qinitid = qinitid;
119 priv->shost = shost;
120 priv->int_type = INT_TYPE;
121
122 if (request_irq(qlirq, qlogicfas408_ihandl, 0, qlogic_name, shost))
123 goto free_scsi_host;
124
125 sprintf(priv->qinfo,
126 "Qlogicfas Driver version 0.46, chip %02X at %03X, IRQ %d, TPdma:%d",
127 qltyp, qbase, qlirq, QL_TURBO_PDMA);
128
129 if (scsi_add_host(shost, NULL))
130 goto free_interrupt;
131
132 scsi_scan_host(shost);
133
134 return shost;
135
136free_interrupt:
137 free_irq(qlirq, shost);
138
139free_scsi_host:
140 scsi_host_put(shost);
141
142err:
143 return NULL;
144}
145static int qlogic_probe(struct pcmcia_device *link)
146{
147 scsi_info_t *info;
148
149 dev_dbg(&link->dev, "qlogic_attach()\n");
150
151 /* Create new SCSI device */
152 info = kzalloc(sizeof(*info), GFP_KERNEL);
153 if (!info)
154 return -ENOMEM;
155 info->p_dev = link;
156 link->priv = info;
157 link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
158 link->config_regs = PRESENT_OPTION;
159
160 return qlogic_config(link);
161} /* qlogic_attach */
162
163/*====================================================================*/
164
165static void qlogic_detach(struct pcmcia_device *link)
166{
167 dev_dbg(&link->dev, "qlogic_detach\n");
168
169 qlogic_release(link);
170 kfree(link->priv);
171
172} /* qlogic_detach */
173
174/*====================================================================*/
175
176static int qlogic_config_check(struct pcmcia_device *p_dev, void *priv_data)
177{
178 p_dev->io_lines = 10;
179 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
180 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
181
182 if (p_dev->resource[0]->start == 0)
183 return -ENODEV;
184
185 return pcmcia_request_io(p_dev);
186}
187
188static int qlogic_config(struct pcmcia_device * link)
189{
190 scsi_info_t *info = link->priv;
191 int ret;
192 struct Scsi_Host *host;
193
194 dev_dbg(&link->dev, "qlogic_config\n");
195
196 ret = pcmcia_loop_config(link, qlogic_config_check, NULL);
197 if (ret)
198 goto failed;
199
200 if (!link->irq)
201 goto failed;
202
203 ret = pcmcia_enable_device(link);
204 if (ret)
205 goto failed;
206
207 if ((info->manf_id == MANFID_MACNICA) || (info->manf_id == MANFID_PIONEER) || (info->manf_id == 0x0098)) {
208 /* set ATAcmd */
209 outb(0xb4, link->resource[0]->start + 0xd);
210 outb(0x24, link->resource[0]->start + 0x9);
211 outb(0x04, link->resource[0]->start + 0xd);
212 }
213
214 /* The KXL-810AN has a bigger IO port window */
215 if (resource_size(link->resource[0]) == 32)
216 host = qlogic_detect(&qlogicfas_driver_template, link,
217 link->resource[0]->start + 16, link->irq);
218 else
219 host = qlogic_detect(&qlogicfas_driver_template, link,
220 link->resource[0]->start, link->irq);
221
222 if (!host) {
223 printk(KERN_INFO "%s: no SCSI devices found\n", qlogic_name);
224 goto failed;
225 }
226
227 info->host = host;
228
229 return 0;
230
231failed:
232 pcmcia_disable_device(link);
233 return -ENODEV;
234} /* qlogic_config */
235
236/*====================================================================*/
237
238static void qlogic_release(struct pcmcia_device *link)
239{
240 scsi_info_t *info = link->priv;
241
242 dev_dbg(&link->dev, "qlogic_release\n");
243
244 scsi_remove_host(info->host);
245
246 free_irq(link->irq, info->host);
247 pcmcia_disable_device(link);
248
249 scsi_host_put(info->host);
250}
251
252/*====================================================================*/
253
254static int qlogic_resume(struct pcmcia_device *link)
255{
256 scsi_info_t *info = link->priv;
257
258 pcmcia_enable_device(link);
259 if ((info->manf_id == MANFID_MACNICA) ||
260 (info->manf_id == MANFID_PIONEER) ||
261 (info->manf_id == 0x0098)) {
262 outb(0x80, link->resource[0]->start + 0xd);
263 outb(0x24, link->resource[0]->start + 0x9);
264 outb(0x04, link->resource[0]->start + 0xd);
265 }
266 /* Ugggglllyyyy!!! */
267 qlogicfas408_bus_reset(NULL);
268
269 return 0;
270}
271
272static const struct pcmcia_device_id qlogic_ids[] = {
273 PCMCIA_DEVICE_PROD_ID12("EIger Labs", "PCMCIA-to-SCSI Adapter", 0x88395fa7, 0x33b7a5e6),
274 PCMCIA_DEVICE_PROD_ID12("EPSON", "SCSI-2 PC Card SC200", 0xd361772f, 0x299d1751),
275 PCMCIA_DEVICE_PROD_ID12("MACNICA", "MIRACLE SCSI-II mPS110", 0x20841b68, 0xab3c3b6d),
276 PCMCIA_DEVICE_PROD_ID12("MIDORI ELECTRONICS ", "CN-SC43", 0x6534382a, 0xd67eee79),
277 PCMCIA_DEVICE_PROD_ID12("NEC", "PC-9801N-J03R", 0x18df0ba0, 0x24662e8a),
278 PCMCIA_DEVICE_PROD_ID12("KME ", "KXLC003", 0x82375a27, 0xf68e5bf7),
279 PCMCIA_DEVICE_PROD_ID12("KME ", "KXLC004", 0x82375a27, 0x68eace54),
280 PCMCIA_DEVICE_PROD_ID12("KME", "KXLC101", 0x3faee676, 0x194250ec),
281 PCMCIA_DEVICE_PROD_ID12("QLOGIC CORPORATION", "pc05", 0xd77b2930, 0xa85b2735),
282 PCMCIA_DEVICE_PROD_ID12("QLOGIC CORPORATION", "pc05 rev 1.10", 0xd77b2930, 0x70f8b5f8),
283 PCMCIA_DEVICE_PROD_ID123("KME", "KXLC002", "00", 0x3faee676, 0x81896b61, 0xf99f065f),
284 PCMCIA_DEVICE_PROD_ID12("RATOC System Inc.", "SCSI2 CARD 37", 0x85c10e17, 0x1a2640c1),
285 PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "SCSC200A PC CARD SCSI", 0xb4585a1a, 0xa6f06ebe),
286 PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "SCSC200B PC CARD SCSI-10", 0xb4585a1a, 0x0a88dea0),
287 /* these conflict with other cards! */
288 /* PCMCIA_DEVICE_PROD_ID123("MACNICA", "MIRACLE SCSI", "mPS100", 0x20841b68, 0xf8dedaeb, 0x89f7fafb), */
289 /* PCMCIA_DEVICE_PROD_ID123("MACNICA", "MIRACLE SCSI", "mPS100", 0x20841b68, 0xf8dedaeb, 0x89f7fafb), */
290 PCMCIA_DEVICE_NULL,
291};
292MODULE_DEVICE_TABLE(pcmcia, qlogic_ids);
293
294static struct pcmcia_driver qlogic_cs_driver = {
295 .owner = THIS_MODULE,
296 .name = "qlogic_cs",
297 .probe = qlogic_probe,
298 .remove = qlogic_detach,
299 .id_table = qlogic_ids,
300 .resume = qlogic_resume,
301};
302
303static int __init init_qlogic_cs(void)
304{
305 return pcmcia_register_driver(&qlogic_cs_driver);
306}
307
308static void __exit exit_qlogic_cs(void)
309{
310 pcmcia_unregister_driver(&qlogic_cs_driver);
311}
312
313MODULE_AUTHOR("Tom Zerucha, Michael Griffith");
314MODULE_DESCRIPTION("Driver for the PCMCIA Qlogic FAS SCSI controllers");
315MODULE_LICENSE("GPL");
316module_init(init_qlogic_cs);
317module_exit(exit_qlogic_cs);