Loading...
1/*
2 * Driver for Vitesse PHYs
3 *
4 * Author: Kriston Carson
5 *
6 * Copyright (c) 2005 Freescale Semiconductor, Inc.
7 *
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2 of the License, or (at your
11 * option) any later version.
12 *
13 */
14
15#include <linux/kernel.h>
16#include <linux/module.h>
17#include <linux/mii.h>
18#include <linux/ethtool.h>
19#include <linux/phy.h>
20
21/* Vitesse Extended Control Register 1 */
22#define MII_VSC8244_EXT_CON1 0x17
23#define MII_VSC8244_EXTCON1_INIT 0x0000
24#define MII_VSC8244_EXTCON1_TX_SKEW_MASK 0x0c00
25#define MII_VSC8244_EXTCON1_RX_SKEW_MASK 0x0300
26#define MII_VSC8244_EXTCON1_TX_SKEW 0x0800
27#define MII_VSC8244_EXTCON1_RX_SKEW 0x0200
28
29/* Vitesse Interrupt Mask Register */
30#define MII_VSC8244_IMASK 0x19
31#define MII_VSC8244_IMASK_IEN 0x8000
32#define MII_VSC8244_IMASK_SPEED 0x4000
33#define MII_VSC8244_IMASK_LINK 0x2000
34#define MII_VSC8244_IMASK_DUPLEX 0x1000
35#define MII_VSC8244_IMASK_MASK 0xf000
36
37#define MII_VSC8221_IMASK_MASK 0xa000
38
39/* Vitesse Interrupt Status Register */
40#define MII_VSC8244_ISTAT 0x1a
41#define MII_VSC8244_ISTAT_STATUS 0x8000
42#define MII_VSC8244_ISTAT_SPEED 0x4000
43#define MII_VSC8244_ISTAT_LINK 0x2000
44#define MII_VSC8244_ISTAT_DUPLEX 0x1000
45
46/* Vitesse Auxiliary Control/Status Register */
47#define MII_VSC8244_AUX_CONSTAT 0x1c
48#define MII_VSC8244_AUXCONSTAT_INIT 0x0000
49#define MII_VSC8244_AUXCONSTAT_DUPLEX 0x0020
50#define MII_VSC8244_AUXCONSTAT_SPEED 0x0018
51#define MII_VSC8244_AUXCONSTAT_GBIT 0x0010
52#define MII_VSC8244_AUXCONSTAT_100 0x0008
53
54#define MII_VSC8221_AUXCONSTAT_INIT 0x0004 /* need to set this bit? */
55#define MII_VSC8221_AUXCONSTAT_RESERVED 0x0004
56
57#define PHY_ID_VSC8244 0x000fc6c0
58#define PHY_ID_VSC8221 0x000fc550
59
60MODULE_DESCRIPTION("Vitesse PHY driver");
61MODULE_AUTHOR("Kriston Carson");
62MODULE_LICENSE("GPL");
63
64static int vsc824x_config_init(struct phy_device *phydev)
65{
66 int extcon;
67 int err;
68
69 err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT,
70 MII_VSC8244_AUXCONSTAT_INIT);
71 if (err < 0)
72 return err;
73
74 extcon = phy_read(phydev, MII_VSC8244_EXT_CON1);
75
76 if (extcon < 0)
77 return err;
78
79 extcon &= ~(MII_VSC8244_EXTCON1_TX_SKEW_MASK |
80 MII_VSC8244_EXTCON1_RX_SKEW_MASK);
81
82 if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
83 extcon |= (MII_VSC8244_EXTCON1_TX_SKEW |
84 MII_VSC8244_EXTCON1_RX_SKEW);
85
86 err = phy_write(phydev, MII_VSC8244_EXT_CON1, extcon);
87
88 return err;
89}
90
91static int vsc824x_ack_interrupt(struct phy_device *phydev)
92{
93 int err = 0;
94
95 /*
96 * Don't bother to ACK the interrupts if interrupts
97 * are disabled. The 824x cannot clear the interrupts
98 * if they are disabled.
99 */
100 if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
101 err = phy_read(phydev, MII_VSC8244_ISTAT);
102
103 return (err < 0) ? err : 0;
104}
105
106static int vsc82xx_config_intr(struct phy_device *phydev)
107{
108 int err;
109
110 if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
111 err = phy_write(phydev, MII_VSC8244_IMASK,
112 phydev->drv->phy_id == PHY_ID_VSC8244 ?
113 MII_VSC8244_IMASK_MASK :
114 MII_VSC8221_IMASK_MASK);
115 else {
116 /*
117 * The Vitesse PHY cannot clear the interrupt
118 * once it has disabled them, so we clear them first
119 */
120 err = phy_read(phydev, MII_VSC8244_ISTAT);
121
122 if (err < 0)
123 return err;
124
125 err = phy_write(phydev, MII_VSC8244_IMASK, 0);
126 }
127
128 return err;
129}
130
131/* Vitesse 824x */
132static struct phy_driver vsc8244_driver = {
133 .phy_id = PHY_ID_VSC8244,
134 .name = "Vitesse VSC8244",
135 .phy_id_mask = 0x000fffc0,
136 .features = PHY_GBIT_FEATURES,
137 .flags = PHY_HAS_INTERRUPT,
138 .config_init = &vsc824x_config_init,
139 .config_aneg = &genphy_config_aneg,
140 .read_status = &genphy_read_status,
141 .ack_interrupt = &vsc824x_ack_interrupt,
142 .config_intr = &vsc82xx_config_intr,
143 .driver = { .owner = THIS_MODULE,},
144};
145
146static int vsc8221_config_init(struct phy_device *phydev)
147{
148 int err;
149
150 err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT,
151 MII_VSC8221_AUXCONSTAT_INIT);
152 return err;
153
154 /* Perhaps we should set EXT_CON1 based on the interface?
155 Options are 802.3Z SerDes or SGMII */
156}
157
158/* Vitesse 8221 */
159static struct phy_driver vsc8221_driver = {
160 .phy_id = PHY_ID_VSC8221,
161 .phy_id_mask = 0x000ffff0,
162 .name = "Vitesse VSC8221",
163 .features = PHY_GBIT_FEATURES,
164 .flags = PHY_HAS_INTERRUPT,
165 .config_init = &vsc8221_config_init,
166 .config_aneg = &genphy_config_aneg,
167 .read_status = &genphy_read_status,
168 .ack_interrupt = &vsc824x_ack_interrupt,
169 .config_intr = &vsc82xx_config_intr,
170 .driver = { .owner = THIS_MODULE,},
171};
172
173static int __init vsc82xx_init(void)
174{
175 int err;
176
177 err = phy_driver_register(&vsc8244_driver);
178 if (err < 0)
179 return err;
180 err = phy_driver_register(&vsc8221_driver);
181 if (err < 0)
182 phy_driver_unregister(&vsc8244_driver);
183 return err;
184}
185
186static void __exit vsc82xx_exit(void)
187{
188 phy_driver_unregister(&vsc8244_driver);
189 phy_driver_unregister(&vsc8221_driver);
190}
191
192module_init(vsc82xx_init);
193module_exit(vsc82xx_exit);
194
195static struct mdio_device_id __maybe_unused vitesse_tbl[] = {
196 { PHY_ID_VSC8244, 0x000fffc0 },
197 { PHY_ID_VSC8221, 0x000ffff0 },
198 { }
199};
200
201MODULE_DEVICE_TABLE(mdio, vitesse_tbl);
1/*
2 * Driver for Vitesse PHYs
3 *
4 * Author: Kriston Carson
5 *
6 * Copyright (c) 2005, 2009, 2011 Freescale Semiconductor, Inc.
7 *
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2 of the License, or (at your
11 * option) any later version.
12 *
13 */
14
15#include <linux/kernel.h>
16#include <linux/module.h>
17#include <linux/mii.h>
18#include <linux/ethtool.h>
19#include <linux/phy.h>
20
21/* Vitesse Extended Page Magic Register(s) */
22#define MII_VSC82X4_EXT_PAGE_16E 0x10
23#define MII_VSC82X4_EXT_PAGE_17E 0x11
24#define MII_VSC82X4_EXT_PAGE_18E 0x12
25
26/* Vitesse Extended Control Register 1 */
27#define MII_VSC8244_EXT_CON1 0x17
28#define MII_VSC8244_EXTCON1_INIT 0x0000
29#define MII_VSC8244_EXTCON1_TX_SKEW_MASK 0x0c00
30#define MII_VSC8244_EXTCON1_RX_SKEW_MASK 0x0300
31#define MII_VSC8244_EXTCON1_TX_SKEW 0x0800
32#define MII_VSC8244_EXTCON1_RX_SKEW 0x0200
33
34/* Vitesse Interrupt Mask Register */
35#define MII_VSC8244_IMASK 0x19
36#define MII_VSC8244_IMASK_IEN 0x8000
37#define MII_VSC8244_IMASK_SPEED 0x4000
38#define MII_VSC8244_IMASK_LINK 0x2000
39#define MII_VSC8244_IMASK_DUPLEX 0x1000
40#define MII_VSC8244_IMASK_MASK 0xf000
41
42#define MII_VSC8221_IMASK_MASK 0xa000
43
44/* Vitesse Interrupt Status Register */
45#define MII_VSC8244_ISTAT 0x1a
46#define MII_VSC8244_ISTAT_STATUS 0x8000
47#define MII_VSC8244_ISTAT_SPEED 0x4000
48#define MII_VSC8244_ISTAT_LINK 0x2000
49#define MII_VSC8244_ISTAT_DUPLEX 0x1000
50
51/* Vitesse Auxiliary Control/Status Register */
52#define MII_VSC8244_AUX_CONSTAT 0x1c
53#define MII_VSC8244_AUXCONSTAT_INIT 0x0000
54#define MII_VSC8244_AUXCONSTAT_DUPLEX 0x0020
55#define MII_VSC8244_AUXCONSTAT_SPEED 0x0018
56#define MII_VSC8244_AUXCONSTAT_GBIT 0x0010
57#define MII_VSC8244_AUXCONSTAT_100 0x0008
58
59#define MII_VSC8221_AUXCONSTAT_INIT 0x0004 /* need to set this bit? */
60#define MII_VSC8221_AUXCONSTAT_RESERVED 0x0004
61
62/* Vitesse Extended Page Access Register */
63#define MII_VSC82X4_EXT_PAGE_ACCESS 0x1f
64
65#define PHY_ID_VSC8234 0x000fc620
66#define PHY_ID_VSC8244 0x000fc6c0
67#define PHY_ID_VSC8514 0x00070670
68#define PHY_ID_VSC8574 0x000704a0
69#define PHY_ID_VSC8601 0x00070420
70#define PHY_ID_VSC8662 0x00070660
71#define PHY_ID_VSC8221 0x000fc550
72#define PHY_ID_VSC8211 0x000fc4b0
73
74MODULE_DESCRIPTION("Vitesse PHY driver");
75MODULE_AUTHOR("Kriston Carson");
76MODULE_LICENSE("GPL");
77
78static int vsc824x_add_skew(struct phy_device *phydev)
79{
80 int err;
81 int extcon;
82
83 extcon = phy_read(phydev, MII_VSC8244_EXT_CON1);
84
85 if (extcon < 0)
86 return extcon;
87
88 extcon &= ~(MII_VSC8244_EXTCON1_TX_SKEW_MASK |
89 MII_VSC8244_EXTCON1_RX_SKEW_MASK);
90
91 extcon |= (MII_VSC8244_EXTCON1_TX_SKEW |
92 MII_VSC8244_EXTCON1_RX_SKEW);
93
94 err = phy_write(phydev, MII_VSC8244_EXT_CON1, extcon);
95
96 return err;
97}
98
99static int vsc824x_config_init(struct phy_device *phydev)
100{
101 int err;
102
103 err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT,
104 MII_VSC8244_AUXCONSTAT_INIT);
105 if (err < 0)
106 return err;
107
108 if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
109 err = vsc824x_add_skew(phydev);
110
111 return err;
112}
113
114static int vsc824x_ack_interrupt(struct phy_device *phydev)
115{
116 int err = 0;
117
118 /* Don't bother to ACK the interrupts if interrupts
119 * are disabled. The 824x cannot clear the interrupts
120 * if they are disabled.
121 */
122 if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
123 err = phy_read(phydev, MII_VSC8244_ISTAT);
124
125 return (err < 0) ? err : 0;
126}
127
128static int vsc82xx_config_intr(struct phy_device *phydev)
129{
130 int err;
131
132 if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
133 err = phy_write(phydev, MII_VSC8244_IMASK,
134 (phydev->drv->phy_id == PHY_ID_VSC8234 ||
135 phydev->drv->phy_id == PHY_ID_VSC8244 ||
136 phydev->drv->phy_id == PHY_ID_VSC8514 ||
137 phydev->drv->phy_id == PHY_ID_VSC8574 ||
138 phydev->drv->phy_id == PHY_ID_VSC8601) ?
139 MII_VSC8244_IMASK_MASK :
140 MII_VSC8221_IMASK_MASK);
141 else {
142 /* The Vitesse PHY cannot clear the interrupt
143 * once it has disabled them, so we clear them first
144 */
145 err = phy_read(phydev, MII_VSC8244_ISTAT);
146
147 if (err < 0)
148 return err;
149
150 err = phy_write(phydev, MII_VSC8244_IMASK, 0);
151 }
152
153 return err;
154}
155
156static int vsc8221_config_init(struct phy_device *phydev)
157{
158 int err;
159
160 err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT,
161 MII_VSC8221_AUXCONSTAT_INIT);
162 return err;
163
164 /* Perhaps we should set EXT_CON1 based on the interface?
165 * Options are 802.3Z SerDes or SGMII
166 */
167}
168
169/* vsc82x4_config_autocross_enable - Enable auto MDI/MDI-X for forced links
170 * @phydev: target phy_device struct
171 *
172 * Enable auto MDI/MDI-X when in 10/100 forced link speeds by writing
173 * special values in the VSC8234/VSC8244 extended reserved registers
174 */
175static int vsc82x4_config_autocross_enable(struct phy_device *phydev)
176{
177 int ret;
178
179 if (phydev->autoneg == AUTONEG_ENABLE || phydev->speed > SPEED_100)
180 return 0;
181
182 /* map extended registers set 0x10 - 0x1e */
183 ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x52b5);
184 if (ret >= 0)
185 ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_18E, 0x0012);
186 if (ret >= 0)
187 ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_17E, 0x2803);
188 if (ret >= 0)
189 ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_16E, 0x87fa);
190 /* map standard registers set 0x10 - 0x1e */
191 if (ret >= 0)
192 ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x0000);
193 else
194 phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x0000);
195
196 return ret;
197}
198
199/* vsc82x4_config_aneg - restart auto-negotiation or write BMCR
200 * @phydev: target phy_device struct
201 *
202 * Description: If auto-negotiation is enabled, we configure the
203 * advertising, and then restart auto-negotiation. If it is not
204 * enabled, then we write the BMCR and also start the auto
205 * MDI/MDI-X feature
206 */
207static int vsc82x4_config_aneg(struct phy_device *phydev)
208{
209 int ret;
210
211 /* Enable auto MDI/MDI-X when in 10/100 forced link speeds by
212 * writing special values in the VSC8234 extended reserved registers
213 */
214 if (phydev->autoneg != AUTONEG_ENABLE && phydev->speed <= SPEED_100) {
215 ret = genphy_setup_forced(phydev);
216
217 if (ret < 0) /* error */
218 return ret;
219
220 return vsc82x4_config_autocross_enable(phydev);
221 }
222
223 return genphy_config_aneg(phydev);
224}
225
226/* Vitesse 82xx */
227static struct phy_driver vsc82xx_driver[] = {
228{
229 .phy_id = PHY_ID_VSC8234,
230 .name = "Vitesse VSC8234",
231 .phy_id_mask = 0x000ffff0,
232 .features = PHY_GBIT_FEATURES,
233 .flags = PHY_HAS_INTERRUPT,
234 .config_init = &vsc824x_config_init,
235 .config_aneg = &vsc82x4_config_aneg,
236 .read_status = &genphy_read_status,
237 .ack_interrupt = &vsc824x_ack_interrupt,
238 .config_intr = &vsc82xx_config_intr,
239}, {
240 .phy_id = PHY_ID_VSC8244,
241 .name = "Vitesse VSC8244",
242 .phy_id_mask = 0x000fffc0,
243 .features = PHY_GBIT_FEATURES,
244 .flags = PHY_HAS_INTERRUPT,
245 .config_init = &vsc824x_config_init,
246 .config_aneg = &vsc82x4_config_aneg,
247 .read_status = &genphy_read_status,
248 .ack_interrupt = &vsc824x_ack_interrupt,
249 .config_intr = &vsc82xx_config_intr,
250}, {
251 .phy_id = PHY_ID_VSC8514,
252 .name = "Vitesse VSC8514",
253 .phy_id_mask = 0x000ffff0,
254 .features = PHY_GBIT_FEATURES,
255 .flags = PHY_HAS_INTERRUPT,
256 .config_init = &vsc824x_config_init,
257 .config_aneg = &vsc82x4_config_aneg,
258 .read_status = &genphy_read_status,
259 .ack_interrupt = &vsc824x_ack_interrupt,
260 .config_intr = &vsc82xx_config_intr,
261}, {
262 .phy_id = PHY_ID_VSC8574,
263 .name = "Vitesse VSC8574",
264 .phy_id_mask = 0x000ffff0,
265 .features = PHY_GBIT_FEATURES,
266 .flags = PHY_HAS_INTERRUPT,
267 .config_init = &vsc824x_config_init,
268 .config_aneg = &vsc82x4_config_aneg,
269 .read_status = &genphy_read_status,
270 .ack_interrupt = &vsc824x_ack_interrupt,
271 .config_intr = &vsc82xx_config_intr,
272}, {
273 .phy_id = PHY_ID_VSC8601,
274 .name = "Vitesse VSC8601",
275 .phy_id_mask = 0x000ffff0,
276 .features = PHY_GBIT_FEATURES,
277 .flags = PHY_HAS_INTERRUPT,
278 .config_init = &genphy_config_init,
279 .config_aneg = &genphy_config_aneg,
280 .read_status = &genphy_read_status,
281 .ack_interrupt = &vsc824x_ack_interrupt,
282 .config_intr = &vsc82xx_config_intr,
283}, {
284 .phy_id = PHY_ID_VSC8662,
285 .name = "Vitesse VSC8662",
286 .phy_id_mask = 0x000ffff0,
287 .features = PHY_GBIT_FEATURES,
288 .flags = PHY_HAS_INTERRUPT,
289 .config_init = &vsc824x_config_init,
290 .config_aneg = &vsc82x4_config_aneg,
291 .read_status = &genphy_read_status,
292 .ack_interrupt = &vsc824x_ack_interrupt,
293 .config_intr = &vsc82xx_config_intr,
294}, {
295 /* Vitesse 8221 */
296 .phy_id = PHY_ID_VSC8221,
297 .phy_id_mask = 0x000ffff0,
298 .name = "Vitesse VSC8221",
299 .features = PHY_GBIT_FEATURES,
300 .flags = PHY_HAS_INTERRUPT,
301 .config_init = &vsc8221_config_init,
302 .config_aneg = &genphy_config_aneg,
303 .read_status = &genphy_read_status,
304 .ack_interrupt = &vsc824x_ack_interrupt,
305 .config_intr = &vsc82xx_config_intr,
306}, {
307 /* Vitesse 8211 */
308 .phy_id = PHY_ID_VSC8211,
309 .phy_id_mask = 0x000ffff0,
310 .name = "Vitesse VSC8211",
311 .features = PHY_GBIT_FEATURES,
312 .flags = PHY_HAS_INTERRUPT,
313 .config_init = &vsc8221_config_init,
314 .config_aneg = &genphy_config_aneg,
315 .read_status = &genphy_read_status,
316 .ack_interrupt = &vsc824x_ack_interrupt,
317 .config_intr = &vsc82xx_config_intr,
318} };
319
320module_phy_driver(vsc82xx_driver);
321
322static struct mdio_device_id __maybe_unused vitesse_tbl[] = {
323 { PHY_ID_VSC8234, 0x000ffff0 },
324 { PHY_ID_VSC8244, 0x000fffc0 },
325 { PHY_ID_VSC8514, 0x000ffff0 },
326 { PHY_ID_VSC8574, 0x000ffff0 },
327 { PHY_ID_VSC8662, 0x000ffff0 },
328 { PHY_ID_VSC8221, 0x000ffff0 },
329 { PHY_ID_VSC8211, 0x000ffff0 },
330 { }
331};
332
333MODULE_DEVICE_TABLE(mdio, vitesse_tbl);