Linux Audio

Check our new training course

Loading...
Note: File does not exist in v3.1.
  1/*******************************************************************************
  2
  3  Intel PRO/1000 Linux driver
  4  Copyright(c) 1999 - 2006 Intel Corporation.
  5
  6  This program is free software; you can redistribute it and/or modify it
  7  under the terms and conditions of the GNU General Public License,
  8  version 2, as published by the Free Software Foundation.
  9
 10  This program is distributed in the hope it will be useful, but WITHOUT
 11  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 12  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 13  more details.
 14
 15  You should have received a copy of the GNU General Public License along with
 16  this program; if not, write to the Free Software Foundation, Inc.,
 17  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
 18
 19  The full GNU General Public License is included in this distribution in
 20  the file called "COPYING".
 21
 22  Contact Information:
 23  Linux NICS <linux.nics@intel.com>
 24  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
 25  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 26
 27*******************************************************************************/
 28
 29
 30/* Linux PRO/1000 Ethernet Driver main header file */
 31
 32#ifndef _E1000_H_
 33#define _E1000_H_
 34
 35#include <linux/stddef.h>
 36#include <linux/module.h>
 37#include <linux/types.h>
 38#include <asm/byteorder.h>
 39#include <linux/mm.h>
 40#include <linux/errno.h>
 41#include <linux/ioport.h>
 42#include <linux/pci.h>
 43#include <linux/kernel.h>
 44#include <linux/netdevice.h>
 45#include <linux/etherdevice.h>
 46#include <linux/skbuff.h>
 47#include <linux/delay.h>
 48#include <linux/timer.h>
 49#include <linux/slab.h>
 50#include <linux/vmalloc.h>
 51#include <linux/interrupt.h>
 52#include <linux/string.h>
 53#include <linux/pagemap.h>
 54#include <linux/dma-mapping.h>
 55#include <linux/bitops.h>
 56#include <asm/io.h>
 57#include <asm/irq.h>
 58#include <linux/capability.h>
 59#include <linux/in.h>
 60#include <linux/ip.h>
 61#include <linux/ipv6.h>
 62#include <linux/tcp.h>
 63#include <linux/udp.h>
 64#include <net/pkt_sched.h>
 65#include <linux/list.h>
 66#include <linux/reboot.h>
 67#include <net/checksum.h>
 68#include <linux/mii.h>
 69#include <linux/ethtool.h>
 70#include <linux/if_vlan.h>
 71
 72#define BAR_0		0
 73#define BAR_1		1
 74#define BAR_5		5
 75
 76#define INTEL_E1000_ETHERNET_DEVICE(device_id) {\
 77	PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
 78
 79struct e1000_adapter;
 80
 81#include "e1000_hw.h"
 82
 83#define E1000_MAX_INTR			10
 84
 85/*
 86 * Count for polling __E1000_RESET condition every 10-20msec.
 87 */
 88#define E1000_CHECK_RESET_COUNT	50
 89
 90/* TX/RX descriptor defines */
 91#define E1000_DEFAULT_TXD		256
 92#define E1000_MAX_TXD			256
 93#define E1000_MIN_TXD			48
 94#define E1000_MAX_82544_TXD		4096
 95
 96#define E1000_DEFAULT_RXD		256
 97#define E1000_MAX_RXD			256
 98#define E1000_MIN_RXD			48
 99#define E1000_MAX_82544_RXD		4096
100
101#define E1000_MIN_ITR_USECS		10 /* 100000 irq/sec */
102#define E1000_MAX_ITR_USECS		10000 /* 100    irq/sec */
103
104/* this is the size past which hardware will drop packets when setting LPE=0 */
105#define MAXIMUM_ETHERNET_VLAN_SIZE	1522
106
107/* Supported Rx Buffer Sizes */
108#define E1000_RXBUFFER_128		128    /* Used for packet split */
109#define E1000_RXBUFFER_256		256    /* Used for packet split */
110#define E1000_RXBUFFER_512		512
111#define E1000_RXBUFFER_1024		1024
112#define E1000_RXBUFFER_2048		2048
113#define E1000_RXBUFFER_4096		4096
114#define E1000_RXBUFFER_8192		8192
115#define E1000_RXBUFFER_16384		16384
116
117/* SmartSpeed delimiters */
118#define E1000_SMARTSPEED_DOWNSHIFT	3
119#define E1000_SMARTSPEED_MAX		15
120
121/* Packet Buffer allocations */
122#define E1000_PBA_BYTES_SHIFT		0xA
123#define E1000_TX_HEAD_ADDR_SHIFT	7
124#define E1000_PBA_TX_MASK		0xFFFF0000
125
126/* Flow Control Watermarks */
127#define E1000_FC_HIGH_DIFF	0x1638 /* High: 5688 bytes below Rx FIFO size */
128#define E1000_FC_LOW_DIFF	0x1640 /* Low:  5696 bytes below Rx FIFO size */
129
130#define E1000_FC_PAUSE_TIME	0xFFFF /* pause for the max or until send xon */
131
132/* How many Tx Descriptors do we need to call netif_wake_queue ? */
133#define E1000_TX_QUEUE_WAKE	16
134/* How many Rx Buffers do we bundle into one write to the hardware ? */
135#define E1000_RX_BUFFER_WRITE	16 /* Must be power of 2 */
136
137#define AUTO_ALL_MODES		0
138#define E1000_EEPROM_82544_APM	0x0004
139#define E1000_EEPROM_APME	0x0400
140
141#ifndef E1000_MASTER_SLAVE
142/* Switch to override PHY master/slave setting */
143#define E1000_MASTER_SLAVE	e1000_ms_hw_default
144#endif
145
146#define E1000_MNG_VLAN_NONE	(-1)
147
148/* wrapper around a pointer to a socket buffer,
149 * so a DMA handle can be stored along with the buffer
150 */
151struct e1000_tx_buffer {
152	struct sk_buff *skb;
153	dma_addr_t dma;
154	unsigned long time_stamp;
155	u16 length;
156	u16 next_to_watch;
157	bool mapped_as_page;
158	unsigned short segs;
159	unsigned int bytecount;
160};
161
162struct e1000_rx_buffer {
163	union {
164		struct page *page; /* jumbo: alloc_page */
165		u8 *data; /* else, netdev_alloc_frag */
166	} rxbuf;
167	dma_addr_t dma;
168};
169
170struct e1000_tx_ring {
171	/* pointer to the descriptor ring memory */
172	void *desc;
173	/* physical address of the descriptor ring */
174	dma_addr_t dma;
175	/* length of descriptor ring in bytes */
176	unsigned int size;
177	/* number of descriptors in the ring */
178	unsigned int count;
179	/* next descriptor to associate a buffer with */
180	unsigned int next_to_use;
181	/* next descriptor to check for DD status bit */
182	unsigned int next_to_clean;
183	/* array of buffer information structs */
184	struct e1000_tx_buffer *buffer_info;
185
186	u16 tdh;
187	u16 tdt;
188	bool last_tx_tso;
189};
190
191struct e1000_rx_ring {
192	/* pointer to the descriptor ring memory */
193	void *desc;
194	/* physical address of the descriptor ring */
195	dma_addr_t dma;
196	/* length of descriptor ring in bytes */
197	unsigned int size;
198	/* number of descriptors in the ring */
199	unsigned int count;
200	/* next descriptor to associate a buffer with */
201	unsigned int next_to_use;
202	/* next descriptor to check for DD status bit */
203	unsigned int next_to_clean;
204	/* array of buffer information structs */
205	struct e1000_rx_buffer *buffer_info;
206	struct sk_buff *rx_skb_top;
207
208	/* cpu for rx queue */
209	int cpu;
210
211	u16 rdh;
212	u16 rdt;
213};
214
215#define E1000_DESC_UNUSED(R)						\
216({									\
217	unsigned int clean = smp_load_acquire(&(R)->next_to_clean);	\
218	unsigned int use = READ_ONCE((R)->next_to_use);			\
219	(clean > use ? 0 : (R)->count) + clean - use - 1;		\
220})
221
222#define E1000_RX_DESC_EXT(R, i)						\
223	(&(((union e1000_rx_desc_extended *)((R).desc))[i]))
224#define E1000_GET_DESC(R, i, type)	(&(((struct type *)((R).desc))[i]))
225#define E1000_RX_DESC(R, i)		E1000_GET_DESC(R, i, e1000_rx_desc)
226#define E1000_TX_DESC(R, i)		E1000_GET_DESC(R, i, e1000_tx_desc)
227#define E1000_CONTEXT_DESC(R, i)	E1000_GET_DESC(R, i, e1000_context_desc)
228
229/* board specific private data structure */
230
231struct e1000_adapter {
232	unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
233	u16 mng_vlan_id;
234	u32 bd_number;
235	u32 rx_buffer_len;
236	u32 wol;
237	u32 smartspeed;
238	u32 en_mng_pt;
239	u16 link_speed;
240	u16 link_duplex;
241	spinlock_t stats_lock;
242	unsigned int total_tx_bytes;
243	unsigned int total_tx_packets;
244	unsigned int total_rx_bytes;
245	unsigned int total_rx_packets;
246	/* Interrupt Throttle Rate */
247	u32 itr;
248	u32 itr_setting;
249	u16 tx_itr;
250	u16 rx_itr;
251
252	u8 fc_autoneg;
253
254	/* TX */
255	struct e1000_tx_ring *tx_ring;      /* One per active queue */
256	unsigned int restart_queue;
257	u32 txd_cmd;
258	u32 tx_int_delay;
259	u32 tx_abs_int_delay;
260	u32 gotcl;
261	u64 gotcl_old;
262	u64 tpt_old;
263	u64 colc_old;
264	u32 tx_timeout_count;
265	u32 tx_fifo_head;
266	u32 tx_head_addr;
267	u32 tx_fifo_size;
268	u8  tx_timeout_factor;
269	atomic_t tx_fifo_stall;
270	bool pcix_82544;
271	bool detect_tx_hung;
272	bool dump_buffers;
273
274	/* RX */
275	bool (*clean_rx)(struct e1000_adapter *adapter,
276			 struct e1000_rx_ring *rx_ring,
277			 int *work_done, int work_to_do);
278	void (*alloc_rx_buf)(struct e1000_adapter *adapter,
279			     struct e1000_rx_ring *rx_ring,
280			     int cleaned_count);
281	struct e1000_rx_ring *rx_ring;      /* One per active queue */
282	struct napi_struct napi;
283
284	int num_tx_queues;
285	int num_rx_queues;
286
287	u64 hw_csum_err;
288	u64 hw_csum_good;
289	u32 alloc_rx_buff_failed;
290	u32 rx_int_delay;
291	u32 rx_abs_int_delay;
292	bool rx_csum;
293	u32 gorcl;
294	u64 gorcl_old;
295
296	/* OS defined structs */
297	struct net_device *netdev;
298	struct pci_dev *pdev;
299
300	/* structs defined in e1000_hw.h */
301	struct e1000_hw hw;
302	struct e1000_hw_stats stats;
303	struct e1000_phy_info phy_info;
304	struct e1000_phy_stats phy_stats;
305
306	u32 test_icr;
307	struct e1000_tx_ring test_tx_ring;
308	struct e1000_rx_ring test_rx_ring;
309
310	int msg_enable;
311
312	/* to not mess up cache alignment, always add to the bottom */
313	bool tso_force;
314	bool smart_power_down;	/* phy smart power down */
315	bool quad_port_a;
316	unsigned long flags;
317	u32 eeprom_wol;
318
319	/* for ioport free */
320	int bars;
321	int need_ioport;
322
323	bool discarding;
324
325	struct work_struct reset_task;
326	struct delayed_work watchdog_task;
327	struct delayed_work fifo_stall_task;
328	struct delayed_work phy_info_task;
329};
330
331enum e1000_state_t {
332	__E1000_TESTING,
333	__E1000_RESETTING,
334	__E1000_DOWN
335};
336
337#undef pr_fmt
338#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
339
340struct net_device *e1000_get_hw_dev(struct e1000_hw *hw);
341#define e_dbg(format, arg...) \
342	netdev_dbg(e1000_get_hw_dev(hw), format, ## arg)
343#define e_err(msglvl, format, arg...) \
344	netif_err(adapter, msglvl, adapter->netdev, format, ## arg)
345#define e_info(msglvl, format, arg...) \
346	netif_info(adapter, msglvl, adapter->netdev, format, ## arg)
347#define e_warn(msglvl, format, arg...) \
348	netif_warn(adapter, msglvl, adapter->netdev, format, ## arg)
349#define e_notice(msglvl, format, arg...) \
350	netif_notice(adapter, msglvl, adapter->netdev, format, ## arg)
351#define e_dev_info(format, arg...) \
352	dev_info(&adapter->pdev->dev, format, ## arg)
353#define e_dev_warn(format, arg...) \
354	dev_warn(&adapter->pdev->dev, format, ## arg)
355#define e_dev_err(format, arg...) \
356	dev_err(&adapter->pdev->dev, format, ## arg)
357
358extern char e1000_driver_name[];
359extern const char e1000_driver_version[];
360
361int e1000_up(struct e1000_adapter *adapter);
362void e1000_down(struct e1000_adapter *adapter);
363void e1000_reinit_locked(struct e1000_adapter *adapter);
364void e1000_reset(struct e1000_adapter *adapter);
365int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx);
366int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
367int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
368void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
369void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
370void e1000_update_stats(struct e1000_adapter *adapter);
371bool e1000_has_link(struct e1000_adapter *adapter);
372void e1000_power_up_phy(struct e1000_adapter *);
373void e1000_set_ethtool_ops(struct net_device *netdev);
374void e1000_check_options(struct e1000_adapter *adapter);
375char *e1000_get_hw_dev_name(struct e1000_hw *hw);
376
377#endif /* _E1000_H_ */