Loading...
Note: File does not exist in v4.6.
1/*
2 * Ethernet driver for the Atmel AT91RM9200 (Thunder)
3 *
4 * Copyright (C) 2003 SAN People (Pty) Ltd
5 *
6 * Based on an earlier Atmel EMAC macrocell driver by Atmel and Lineo Inc.
7 * Initial version by Rick Bronson 01/11/2003
8 *
9 * Intel LXT971A PHY support by Christopher Bahns & David Knickerbocker
10 * (Polaroid Corporation)
11 *
12 * Realtek RTL8201(B)L PHY support by Roman Avramenko <roman@imsystems.ru>
13 *
14 * This program is free software; you can redistribute it and/or
15 * modify it under the terms of the GNU General Public License
16 * as published by the Free Software Foundation; either version
17 * 2 of the License, or (at your option) any later version.
18 */
19
20#include <linux/module.h>
21#include <linux/init.h>
22#include <linux/interrupt.h>
23#include <linux/mii.h>
24#include <linux/netdevice.h>
25#include <linux/etherdevice.h>
26#include <linux/skbuff.h>
27#include <linux/dma-mapping.h>
28#include <linux/ethtool.h>
29#include <linux/platform_device.h>
30#include <linux/clk.h>
31#include <linux/gfp.h>
32
33#include <asm/io.h>
34#include <asm/uaccess.h>
35#include <asm/mach-types.h>
36
37#include <mach/at91rm9200_emac.h>
38#include <mach/gpio.h>
39#include <mach/board.h>
40
41#include "at91_ether.h"
42
43#define DRV_NAME "at91_ether"
44#define DRV_VERSION "1.0"
45
46#define LINK_POLL_INTERVAL (HZ)
47
48/* ..................................................................... */
49
50/*
51 * Read from a EMAC register.
52 */
53static inline unsigned long at91_emac_read(unsigned int reg)
54{
55 void __iomem *emac_base = (void __iomem *)AT91_VA_BASE_EMAC;
56
57 return __raw_readl(emac_base + reg);
58}
59
60/*
61 * Write to a EMAC register.
62 */
63static inline void at91_emac_write(unsigned int reg, unsigned long value)
64{
65 void __iomem *emac_base = (void __iomem *)AT91_VA_BASE_EMAC;
66
67 __raw_writel(value, emac_base + reg);
68}
69
70/* ........................... PHY INTERFACE ........................... */
71
72/*
73 * Enable the MDIO bit in MAC control register
74 * When not called from an interrupt-handler, access to the PHY must be
75 * protected by a spinlock.
76 */
77static void enable_mdi(void)
78{
79 unsigned long ctl;
80
81 ctl = at91_emac_read(AT91_EMAC_CTL);
82 at91_emac_write(AT91_EMAC_CTL, ctl | AT91_EMAC_MPE); /* enable management port */
83}
84
85/*
86 * Disable the MDIO bit in the MAC control register
87 */
88static void disable_mdi(void)
89{
90 unsigned long ctl;
91
92 ctl = at91_emac_read(AT91_EMAC_CTL);
93 at91_emac_write(AT91_EMAC_CTL, ctl & ~AT91_EMAC_MPE); /* disable management port */
94}
95
96/*
97 * Wait until the PHY operation is complete.
98 */
99static inline void at91_phy_wait(void) {
100 unsigned long timeout = jiffies + 2;
101
102 while (!(at91_emac_read(AT91_EMAC_SR) & AT91_EMAC_SR_IDLE)) {
103 if (time_after(jiffies, timeout)) {
104 printk("at91_ether: MIO timeout\n");
105 break;
106 }
107 cpu_relax();
108 }
109}
110
111/*
112 * Write value to the a PHY register
113 * Note: MDI interface is assumed to already have been enabled.
114 */
115static void write_phy(unsigned char phy_addr, unsigned char address, unsigned int value)
116{
117 at91_emac_write(AT91_EMAC_MAN, AT91_EMAC_MAN_802_3 | AT91_EMAC_RW_W
118 | ((phy_addr & 0x1f) << 23) | (address << 18) | (value & AT91_EMAC_DATA));
119
120 /* Wait until IDLE bit in Network Status register is cleared */
121 at91_phy_wait();
122}
123
124/*
125 * Read value stored in a PHY register.
126 * Note: MDI interface is assumed to already have been enabled.
127 */
128static void read_phy(unsigned char phy_addr, unsigned char address, unsigned int *value)
129{
130 at91_emac_write(AT91_EMAC_MAN, AT91_EMAC_MAN_802_3 | AT91_EMAC_RW_R
131 | ((phy_addr & 0x1f) << 23) | (address << 18));
132
133 /* Wait until IDLE bit in Network Status register is cleared */
134 at91_phy_wait();
135
136 *value = at91_emac_read(AT91_EMAC_MAN) & AT91_EMAC_DATA;
137}
138
139/* ........................... PHY MANAGEMENT .......................... */
140
141/*
142 * Access the PHY to determine the current link speed and mode, and update the
143 * MAC accordingly.
144 * If no link or auto-negotiation is busy, then no changes are made.
145 */
146static void update_linkspeed(struct net_device *dev, int silent)
147{
148 struct at91_private *lp = netdev_priv(dev);
149 unsigned int bmsr, bmcr, lpa, mac_cfg;
150 unsigned int speed, duplex;
151
152 if (!mii_link_ok(&lp->mii)) { /* no link */
153 netif_carrier_off(dev);
154 if (!silent)
155 printk(KERN_INFO "%s: Link down.\n", dev->name);
156 return;
157 }
158
159 /* Link up, or auto-negotiation still in progress */
160 read_phy(lp->phy_address, MII_BMSR, &bmsr);
161 read_phy(lp->phy_address, MII_BMCR, &bmcr);
162 if (bmcr & BMCR_ANENABLE) { /* AutoNegotiation is enabled */
163 if (!(bmsr & BMSR_ANEGCOMPLETE))
164 return; /* Do nothing - another interrupt generated when negotiation complete */
165
166 read_phy(lp->phy_address, MII_LPA, &lpa);
167 if ((lpa & LPA_100FULL) || (lpa & LPA_100HALF)) speed = SPEED_100;
168 else speed = SPEED_10;
169 if ((lpa & LPA_100FULL) || (lpa & LPA_10FULL)) duplex = DUPLEX_FULL;
170 else duplex = DUPLEX_HALF;
171 } else {
172 speed = (bmcr & BMCR_SPEED100) ? SPEED_100 : SPEED_10;
173 duplex = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
174 }
175
176 /* Update the MAC */
177 mac_cfg = at91_emac_read(AT91_EMAC_CFG) & ~(AT91_EMAC_SPD | AT91_EMAC_FD);
178 if (speed == SPEED_100) {
179 if (duplex == DUPLEX_FULL) /* 100 Full Duplex */
180 mac_cfg |= AT91_EMAC_SPD | AT91_EMAC_FD;
181 else /* 100 Half Duplex */
182 mac_cfg |= AT91_EMAC_SPD;
183 } else {
184 if (duplex == DUPLEX_FULL) /* 10 Full Duplex */
185 mac_cfg |= AT91_EMAC_FD;
186 else {} /* 10 Half Duplex */
187 }
188 at91_emac_write(AT91_EMAC_CFG, mac_cfg);
189
190 if (!silent)
191 printk(KERN_INFO "%s: Link now %i-%s\n", dev->name, speed, (duplex == DUPLEX_FULL) ? "FullDuplex" : "HalfDuplex");
192 netif_carrier_on(dev);
193}
194
195/*
196 * Handle interrupts from the PHY
197 */
198static irqreturn_t at91ether_phy_interrupt(int irq, void *dev_id)
199{
200 struct net_device *dev = (struct net_device *) dev_id;
201 struct at91_private *lp = netdev_priv(dev);
202 unsigned int phy;
203
204 /*
205 * This hander is triggered on both edges, but the PHY chips expect
206 * level-triggering. We therefore have to check if the PHY actually has
207 * an IRQ pending.
208 */
209 enable_mdi();
210 if ((lp->phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) {
211 read_phy(lp->phy_address, MII_DSINTR_REG, &phy); /* ack interrupt in Davicom PHY */
212 if (!(phy & (1 << 0)))
213 goto done;
214 }
215 else if (lp->phy_type == MII_LXT971A_ID) {
216 read_phy(lp->phy_address, MII_ISINTS_REG, &phy); /* ack interrupt in Intel PHY */
217 if (!(phy & (1 << 2)))
218 goto done;
219 }
220 else if (lp->phy_type == MII_BCM5221_ID) {
221 read_phy(lp->phy_address, MII_BCMINTR_REG, &phy); /* ack interrupt in Broadcom PHY */
222 if (!(phy & (1 << 0)))
223 goto done;
224 }
225 else if (lp->phy_type == MII_KS8721_ID) {
226 read_phy(lp->phy_address, MII_TPISTATUS, &phy); /* ack interrupt in Micrel PHY */
227 if (!(phy & ((1 << 2) | 1)))
228 goto done;
229 }
230 else if (lp->phy_type == MII_T78Q21x3_ID) { /* ack interrupt in Teridian PHY */
231 read_phy(lp->phy_address, MII_T78Q21INT_REG, &phy);
232 if (!(phy & ((1 << 2) | 1)))
233 goto done;
234 }
235 else if (lp->phy_type == MII_DP83848_ID) {
236 read_phy(lp->phy_address, MII_DPPHYSTS_REG, &phy); /* ack interrupt in DP83848 PHY */
237 if (!(phy & (1 << 7)))
238 goto done;
239 }
240
241 update_linkspeed(dev, 0);
242
243done:
244 disable_mdi();
245
246 return IRQ_HANDLED;
247}
248
249/*
250 * Initialize and enable the PHY interrupt for link-state changes
251 */
252static void enable_phyirq(struct net_device *dev)
253{
254 struct at91_private *lp = netdev_priv(dev);
255 unsigned int dsintr, irq_number;
256 int status;
257
258 irq_number = lp->board_data.phy_irq_pin;
259 if (!irq_number) {
260 /*
261 * PHY doesn't have an IRQ pin (RTL8201, DP83847, AC101L),
262 * or board does not have it connected.
263 */
264 mod_timer(&lp->check_timer, jiffies + LINK_POLL_INTERVAL);
265 return;
266 }
267
268 status = request_irq(irq_number, at91ether_phy_interrupt, 0, dev->name, dev);
269 if (status) {
270 printk(KERN_ERR "at91_ether: PHY IRQ %d request failed - status %d!\n", irq_number, status);
271 return;
272 }
273
274 spin_lock_irq(&lp->lock);
275 enable_mdi();
276
277 if ((lp->phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) { /* for Davicom PHY */
278 read_phy(lp->phy_address, MII_DSINTR_REG, &dsintr);
279 dsintr = dsintr & ~0xf00; /* clear bits 8..11 */
280 write_phy(lp->phy_address, MII_DSINTR_REG, dsintr);
281 }
282 else if (lp->phy_type == MII_LXT971A_ID) { /* for Intel PHY */
283 read_phy(lp->phy_address, MII_ISINTE_REG, &dsintr);
284 dsintr = dsintr | 0xf2; /* set bits 1, 4..7 */
285 write_phy(lp->phy_address, MII_ISINTE_REG, dsintr);
286 }
287 else if (lp->phy_type == MII_BCM5221_ID) { /* for Broadcom PHY */
288 dsintr = (1 << 15) | ( 1 << 14);
289 write_phy(lp->phy_address, MII_BCMINTR_REG, dsintr);
290 }
291 else if (lp->phy_type == MII_KS8721_ID) { /* for Micrel PHY */
292 dsintr = (1 << 10) | ( 1 << 8);
293 write_phy(lp->phy_address, MII_TPISTATUS, dsintr);
294 }
295 else if (lp->phy_type == MII_T78Q21x3_ID) { /* for Teridian PHY */
296 read_phy(lp->phy_address, MII_T78Q21INT_REG, &dsintr);
297 dsintr = dsintr | 0x500; /* set bits 8, 10 */
298 write_phy(lp->phy_address, MII_T78Q21INT_REG, dsintr);
299 }
300 else if (lp->phy_type == MII_DP83848_ID) { /* National Semiconductor DP83848 PHY */
301 read_phy(lp->phy_address, MII_DPMISR_REG, &dsintr);
302 dsintr = dsintr | 0x3c; /* set bits 2..5 */
303 write_phy(lp->phy_address, MII_DPMISR_REG, dsintr);
304 read_phy(lp->phy_address, MII_DPMICR_REG, &dsintr);
305 dsintr = dsintr | 0x3; /* set bits 0,1 */
306 write_phy(lp->phy_address, MII_DPMICR_REG, dsintr);
307 }
308
309 disable_mdi();
310 spin_unlock_irq(&lp->lock);
311}
312
313/*
314 * Disable the PHY interrupt
315 */
316static void disable_phyirq(struct net_device *dev)
317{
318 struct at91_private *lp = netdev_priv(dev);
319 unsigned int dsintr;
320 unsigned int irq_number;
321
322 irq_number = lp->board_data.phy_irq_pin;
323 if (!irq_number) {
324 del_timer_sync(&lp->check_timer);
325 return;
326 }
327
328 spin_lock_irq(&lp->lock);
329 enable_mdi();
330
331 if ((lp->phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) { /* for Davicom PHY */
332 read_phy(lp->phy_address, MII_DSINTR_REG, &dsintr);
333 dsintr = dsintr | 0xf00; /* set bits 8..11 */
334 write_phy(lp->phy_address, MII_DSINTR_REG, dsintr);
335 }
336 else if (lp->phy_type == MII_LXT971A_ID) { /* for Intel PHY */
337 read_phy(lp->phy_address, MII_ISINTE_REG, &dsintr);
338 dsintr = dsintr & ~0xf2; /* clear bits 1, 4..7 */
339 write_phy(lp->phy_address, MII_ISINTE_REG, dsintr);
340 }
341 else if (lp->phy_type == MII_BCM5221_ID) { /* for Broadcom PHY */
342 read_phy(lp->phy_address, MII_BCMINTR_REG, &dsintr);
343 dsintr = ~(1 << 14);
344 write_phy(lp->phy_address, MII_BCMINTR_REG, dsintr);
345 }
346 else if (lp->phy_type == MII_KS8721_ID) { /* for Micrel PHY */
347 read_phy(lp->phy_address, MII_TPISTATUS, &dsintr);
348 dsintr = ~((1 << 10) | (1 << 8));
349 write_phy(lp->phy_address, MII_TPISTATUS, dsintr);
350 }
351 else if (lp->phy_type == MII_T78Q21x3_ID) { /* for Teridian PHY */
352 read_phy(lp->phy_address, MII_T78Q21INT_REG, &dsintr);
353 dsintr = dsintr & ~0x500; /* clear bits 8, 10 */
354 write_phy(lp->phy_address, MII_T78Q21INT_REG, dsintr);
355 }
356 else if (lp->phy_type == MII_DP83848_ID) { /* National Semiconductor DP83848 PHY */
357 read_phy(lp->phy_address, MII_DPMICR_REG, &dsintr);
358 dsintr = dsintr & ~0x3; /* clear bits 0, 1 */
359 write_phy(lp->phy_address, MII_DPMICR_REG, dsintr);
360 read_phy(lp->phy_address, MII_DPMISR_REG, &dsintr);
361 dsintr = dsintr & ~0x3c; /* clear bits 2..5 */
362 write_phy(lp->phy_address, MII_DPMISR_REG, dsintr);
363 }
364
365 disable_mdi();
366 spin_unlock_irq(&lp->lock);
367
368 free_irq(irq_number, dev); /* Free interrupt handler */
369}
370
371/*
372 * Perform a software reset of the PHY.
373 */
374#if 0
375static void reset_phy(struct net_device *dev)
376{
377 struct at91_private *lp = netdev_priv(dev);
378 unsigned int bmcr;
379
380 spin_lock_irq(&lp->lock);
381 enable_mdi();
382
383 /* Perform PHY reset */
384 write_phy(lp->phy_address, MII_BMCR, BMCR_RESET);
385
386 /* Wait until PHY reset is complete */
387 do {
388 read_phy(lp->phy_address, MII_BMCR, &bmcr);
389 } while (!(bmcr & BMCR_RESET));
390
391 disable_mdi();
392 spin_unlock_irq(&lp->lock);
393}
394#endif
395
396static void at91ether_check_link(unsigned long dev_id)
397{
398 struct net_device *dev = (struct net_device *) dev_id;
399 struct at91_private *lp = netdev_priv(dev);
400
401 enable_mdi();
402 update_linkspeed(dev, 1);
403 disable_mdi();
404
405 mod_timer(&lp->check_timer, jiffies + LINK_POLL_INTERVAL);
406}
407
408/* ......................... ADDRESS MANAGEMENT ........................ */
409
410/*
411 * NOTE: Your bootloader must always set the MAC address correctly before
412 * booting into Linux.
413 *
414 * - It must always set the MAC address after reset, even if it doesn't
415 * happen to access the Ethernet while it's booting. Some versions of
416 * U-Boot on the AT91RM9200-DK do not do this.
417 *
418 * - Likewise it must store the addresses in the correct byte order.
419 * MicroMonitor (uMon) on the CSB337 does this incorrectly (and
420 * continues to do so, for bug-compatibility).
421 */
422
423static short __init unpack_mac_address(struct net_device *dev, unsigned int hi, unsigned int lo)
424{
425 char addr[6];
426
427 if (machine_is_csb337()) {
428 addr[5] = (lo & 0xff); /* The CSB337 bootloader stores the MAC the wrong-way around */
429 addr[4] = (lo & 0xff00) >> 8;
430 addr[3] = (lo & 0xff0000) >> 16;
431 addr[2] = (lo & 0xff000000) >> 24;
432 addr[1] = (hi & 0xff);
433 addr[0] = (hi & 0xff00) >> 8;
434 }
435 else {
436 addr[0] = (lo & 0xff);
437 addr[1] = (lo & 0xff00) >> 8;
438 addr[2] = (lo & 0xff0000) >> 16;
439 addr[3] = (lo & 0xff000000) >> 24;
440 addr[4] = (hi & 0xff);
441 addr[5] = (hi & 0xff00) >> 8;
442 }
443
444 if (is_valid_ether_addr(addr)) {
445 memcpy(dev->dev_addr, &addr, 6);
446 return 1;
447 }
448 return 0;
449}
450
451/*
452 * Set the ethernet MAC address in dev->dev_addr
453 */
454static void __init get_mac_address(struct net_device *dev)
455{
456 /* Check Specific-Address 1 */
457 if (unpack_mac_address(dev, at91_emac_read(AT91_EMAC_SA1H), at91_emac_read(AT91_EMAC_SA1L)))
458 return;
459 /* Check Specific-Address 2 */
460 if (unpack_mac_address(dev, at91_emac_read(AT91_EMAC_SA2H), at91_emac_read(AT91_EMAC_SA2L)))
461 return;
462 /* Check Specific-Address 3 */
463 if (unpack_mac_address(dev, at91_emac_read(AT91_EMAC_SA3H), at91_emac_read(AT91_EMAC_SA3L)))
464 return;
465 /* Check Specific-Address 4 */
466 if (unpack_mac_address(dev, at91_emac_read(AT91_EMAC_SA4H), at91_emac_read(AT91_EMAC_SA4L)))
467 return;
468
469 printk(KERN_ERR "at91_ether: Your bootloader did not configure a MAC address.\n");
470}
471
472/*
473 * Program the hardware MAC address from dev->dev_addr.
474 */
475static void update_mac_address(struct net_device *dev)
476{
477 at91_emac_write(AT91_EMAC_SA1L, (dev->dev_addr[3] << 24) | (dev->dev_addr[2] << 16) | (dev->dev_addr[1] << 8) | (dev->dev_addr[0]));
478 at91_emac_write(AT91_EMAC_SA1H, (dev->dev_addr[5] << 8) | (dev->dev_addr[4]));
479
480 at91_emac_write(AT91_EMAC_SA2L, 0);
481 at91_emac_write(AT91_EMAC_SA2H, 0);
482}
483
484/*
485 * Store the new hardware address in dev->dev_addr, and update the MAC.
486 */
487static int set_mac_address(struct net_device *dev, void* addr)
488{
489 struct sockaddr *address = addr;
490
491 if (!is_valid_ether_addr(address->sa_data))
492 return -EADDRNOTAVAIL;
493
494 memcpy(dev->dev_addr, address->sa_data, dev->addr_len);
495 update_mac_address(dev);
496
497 printk("%s: Setting MAC address to %pM\n", dev->name,
498 dev->dev_addr);
499
500 return 0;
501}
502
503static int inline hash_bit_value(int bitnr, __u8 *addr)
504{
505 if (addr[bitnr / 8] & (1 << (bitnr % 8)))
506 return 1;
507 return 0;
508}
509
510/*
511 * The hash address register is 64 bits long and takes up two locations in the memory map.
512 * The least significant bits are stored in EMAC_HSL and the most significant
513 * bits in EMAC_HSH.
514 *
515 * The unicast hash enable and the multicast hash enable bits in the network configuration
516 * register enable the reception of hash matched frames. The destination address is
517 * reduced to a 6 bit index into the 64 bit hash register using the following hash function.
518 * The hash function is an exclusive or of every sixth bit of the destination address.
519 * hash_index[5] = da[5] ^ da[11] ^ da[17] ^ da[23] ^ da[29] ^ da[35] ^ da[41] ^ da[47]
520 * hash_index[4] = da[4] ^ da[10] ^ da[16] ^ da[22] ^ da[28] ^ da[34] ^ da[40] ^ da[46]
521 * hash_index[3] = da[3] ^ da[09] ^ da[15] ^ da[21] ^ da[27] ^ da[33] ^ da[39] ^ da[45]
522 * hash_index[2] = da[2] ^ da[08] ^ da[14] ^ da[20] ^ da[26] ^ da[32] ^ da[38] ^ da[44]
523 * hash_index[1] = da[1] ^ da[07] ^ da[13] ^ da[19] ^ da[25] ^ da[31] ^ da[37] ^ da[43]
524 * hash_index[0] = da[0] ^ da[06] ^ da[12] ^ da[18] ^ da[24] ^ da[30] ^ da[36] ^ da[42]
525 * da[0] represents the least significant bit of the first byte received, that is, the multicast/
526 * unicast indicator, and da[47] represents the most significant bit of the last byte
527 * received.
528 * If the hash index points to a bit that is set in the hash register then the frame will be
529 * matched according to whether the frame is multicast or unicast.
530 * A multicast match will be signalled if the multicast hash enable bit is set, da[0] is 1 and
531 * the hash index points to a bit set in the hash register.
532 * A unicast match will be signalled if the unicast hash enable bit is set, da[0] is 0 and the
533 * hash index points to a bit set in the hash register.
534 * To receive all multicast frames, the hash register should be set with all ones and the
535 * multicast hash enable bit should be set in the network configuration register.
536 */
537
538/*
539 * Return the hash index value for the specified address.
540 */
541static int hash_get_index(__u8 *addr)
542{
543 int i, j, bitval;
544 int hash_index = 0;
545
546 for (j = 0; j < 6; j++) {
547 for (i = 0, bitval = 0; i < 8; i++)
548 bitval ^= hash_bit_value(i*6 + j, addr);
549
550 hash_index |= (bitval << j);
551 }
552
553 return hash_index;
554}
555
556/*
557 * Add multicast addresses to the internal multicast-hash table.
558 */
559static void at91ether_sethashtable(struct net_device *dev)
560{
561 struct netdev_hw_addr *ha;
562 unsigned long mc_filter[2];
563 unsigned int bitnr;
564
565 mc_filter[0] = mc_filter[1] = 0;
566
567 netdev_for_each_mc_addr(ha, dev) {
568 bitnr = hash_get_index(ha->addr);
569 mc_filter[bitnr >> 5] |= 1 << (bitnr & 31);
570 }
571
572 at91_emac_write(AT91_EMAC_HSL, mc_filter[0]);
573 at91_emac_write(AT91_EMAC_HSH, mc_filter[1]);
574}
575
576/*
577 * Enable/Disable promiscuous and multicast modes.
578 */
579static void at91ether_set_multicast_list(struct net_device *dev)
580{
581 unsigned long cfg;
582
583 cfg = at91_emac_read(AT91_EMAC_CFG);
584
585 if (dev->flags & IFF_PROMISC) /* Enable promiscuous mode */
586 cfg |= AT91_EMAC_CAF;
587 else if (dev->flags & (~IFF_PROMISC)) /* Disable promiscuous mode */
588 cfg &= ~AT91_EMAC_CAF;
589
590 if (dev->flags & IFF_ALLMULTI) { /* Enable all multicast mode */
591 at91_emac_write(AT91_EMAC_HSH, -1);
592 at91_emac_write(AT91_EMAC_HSL, -1);
593 cfg |= AT91_EMAC_MTI;
594 } else if (!netdev_mc_empty(dev)) { /* Enable specific multicasts */
595 at91ether_sethashtable(dev);
596 cfg |= AT91_EMAC_MTI;
597 } else if (dev->flags & (~IFF_ALLMULTI)) { /* Disable all multicast mode */
598 at91_emac_write(AT91_EMAC_HSH, 0);
599 at91_emac_write(AT91_EMAC_HSL, 0);
600 cfg &= ~AT91_EMAC_MTI;
601 }
602
603 at91_emac_write(AT91_EMAC_CFG, cfg);
604}
605
606/* ......................... ETHTOOL SUPPORT ........................... */
607
608static int mdio_read(struct net_device *dev, int phy_id, int location)
609{
610 unsigned int value;
611
612 read_phy(phy_id, location, &value);
613 return value;
614}
615
616static void mdio_write(struct net_device *dev, int phy_id, int location, int value)
617{
618 write_phy(phy_id, location, value);
619}
620
621static int at91ether_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
622{
623 struct at91_private *lp = netdev_priv(dev);
624 int ret;
625
626 spin_lock_irq(&lp->lock);
627 enable_mdi();
628
629 ret = mii_ethtool_gset(&lp->mii, cmd);
630
631 disable_mdi();
632 spin_unlock_irq(&lp->lock);
633
634 if (lp->phy_media == PORT_FIBRE) { /* override media type since mii.c doesn't know */
635 cmd->supported = SUPPORTED_FIBRE;
636 cmd->port = PORT_FIBRE;
637 }
638
639 return ret;
640}
641
642static int at91ether_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
643{
644 struct at91_private *lp = netdev_priv(dev);
645 int ret;
646
647 spin_lock_irq(&lp->lock);
648 enable_mdi();
649
650 ret = mii_ethtool_sset(&lp->mii, cmd);
651
652 disable_mdi();
653 spin_unlock_irq(&lp->lock);
654
655 return ret;
656}
657
658static int at91ether_nwayreset(struct net_device *dev)
659{
660 struct at91_private *lp = netdev_priv(dev);
661 int ret;
662
663 spin_lock_irq(&lp->lock);
664 enable_mdi();
665
666 ret = mii_nway_restart(&lp->mii);
667
668 disable_mdi();
669 spin_unlock_irq(&lp->lock);
670
671 return ret;
672}
673
674static void at91ether_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
675{
676 strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
677 strlcpy(info->version, DRV_VERSION, sizeof(info->version));
678 strlcpy(info->bus_info, dev_name(dev->dev.parent), sizeof(info->bus_info));
679}
680
681static const struct ethtool_ops at91ether_ethtool_ops = {
682 .get_settings = at91ether_get_settings,
683 .set_settings = at91ether_set_settings,
684 .get_drvinfo = at91ether_get_drvinfo,
685 .nway_reset = at91ether_nwayreset,
686 .get_link = ethtool_op_get_link,
687};
688
689static int at91ether_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
690{
691 struct at91_private *lp = netdev_priv(dev);
692 int res;
693
694 if (!netif_running(dev))
695 return -EINVAL;
696
697 spin_lock_irq(&lp->lock);
698 enable_mdi();
699 res = generic_mii_ioctl(&lp->mii, if_mii(rq), cmd, NULL);
700 disable_mdi();
701 spin_unlock_irq(&lp->lock);
702
703 return res;
704}
705
706/* ................................ MAC ................................ */
707
708/*
709 * Initialize and start the Receiver and Transmit subsystems
710 */
711static void at91ether_start(struct net_device *dev)
712{
713 struct at91_private *lp = netdev_priv(dev);
714 struct recv_desc_bufs *dlist, *dlist_phys;
715 int i;
716 unsigned long ctl;
717
718 dlist = lp->dlist;
719 dlist_phys = lp->dlist_phys;
720
721 for (i = 0; i < MAX_RX_DESCR; i++) {
722 dlist->descriptors[i].addr = (unsigned int) &dlist_phys->recv_buf[i][0];
723 dlist->descriptors[i].size = 0;
724 }
725
726 /* Set the Wrap bit on the last descriptor */
727 dlist->descriptors[i-1].addr |= EMAC_DESC_WRAP;
728
729 /* Reset buffer index */
730 lp->rxBuffIndex = 0;
731
732 /* Program address of descriptor list in Rx Buffer Queue register */
733 at91_emac_write(AT91_EMAC_RBQP, (unsigned long) dlist_phys);
734
735 /* Enable Receive and Transmit */
736 ctl = at91_emac_read(AT91_EMAC_CTL);
737 at91_emac_write(AT91_EMAC_CTL, ctl | AT91_EMAC_RE | AT91_EMAC_TE);
738}
739
740/*
741 * Open the ethernet interface
742 */
743static int at91ether_open(struct net_device *dev)
744{
745 struct at91_private *lp = netdev_priv(dev);
746 unsigned long ctl;
747
748 if (!is_valid_ether_addr(dev->dev_addr))
749 return -EADDRNOTAVAIL;
750
751 clk_enable(lp->ether_clk); /* Re-enable Peripheral clock */
752
753 /* Clear internal statistics */
754 ctl = at91_emac_read(AT91_EMAC_CTL);
755 at91_emac_write(AT91_EMAC_CTL, ctl | AT91_EMAC_CSR);
756
757 /* Update the MAC address (incase user has changed it) */
758 update_mac_address(dev);
759
760 /* Enable PHY interrupt */
761 enable_phyirq(dev);
762
763 /* Enable MAC interrupts */
764 at91_emac_write(AT91_EMAC_IER, AT91_EMAC_RCOM | AT91_EMAC_RBNA
765 | AT91_EMAC_TUND | AT91_EMAC_RTRY | AT91_EMAC_TCOM
766 | AT91_EMAC_ROVR | AT91_EMAC_ABT);
767
768 /* Determine current link speed */
769 spin_lock_irq(&lp->lock);
770 enable_mdi();
771 update_linkspeed(dev, 0);
772 disable_mdi();
773 spin_unlock_irq(&lp->lock);
774
775 at91ether_start(dev);
776 netif_start_queue(dev);
777 return 0;
778}
779
780/*
781 * Close the interface
782 */
783static int at91ether_close(struct net_device *dev)
784{
785 struct at91_private *lp = netdev_priv(dev);
786 unsigned long ctl;
787
788 /* Disable Receiver and Transmitter */
789 ctl = at91_emac_read(AT91_EMAC_CTL);
790 at91_emac_write(AT91_EMAC_CTL, ctl & ~(AT91_EMAC_TE | AT91_EMAC_RE));
791
792 /* Disable PHY interrupt */
793 disable_phyirq(dev);
794
795 /* Disable MAC interrupts */
796 at91_emac_write(AT91_EMAC_IDR, AT91_EMAC_RCOM | AT91_EMAC_RBNA
797 | AT91_EMAC_TUND | AT91_EMAC_RTRY | AT91_EMAC_TCOM
798 | AT91_EMAC_ROVR | AT91_EMAC_ABT);
799
800 netif_stop_queue(dev);
801
802 clk_disable(lp->ether_clk); /* Disable Peripheral clock */
803
804 return 0;
805}
806
807/*
808 * Transmit packet.
809 */
810static int at91ether_start_xmit(struct sk_buff *skb, struct net_device *dev)
811{
812 struct at91_private *lp = netdev_priv(dev);
813
814 if (at91_emac_read(AT91_EMAC_TSR) & AT91_EMAC_TSR_BNQ) {
815 netif_stop_queue(dev);
816
817 /* Store packet information (to free when Tx completed) */
818 lp->skb = skb;
819 lp->skb_length = skb->len;
820 lp->skb_physaddr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE);
821 dev->stats.tx_bytes += skb->len;
822
823 /* Set address of the data in the Transmit Address register */
824 at91_emac_write(AT91_EMAC_TAR, lp->skb_physaddr);
825 /* Set length of the packet in the Transmit Control register */
826 at91_emac_write(AT91_EMAC_TCR, skb->len);
827
828 } else {
829 printk(KERN_ERR "at91_ether.c: at91ether_start_xmit() called, but device is busy!\n");
830 return NETDEV_TX_BUSY; /* if we return anything but zero, dev.c:1055 calls kfree_skb(skb)
831 on this skb, he also reports -ENETDOWN and printk's, so either
832 we free and return(0) or don't free and return 1 */
833 }
834
835 return NETDEV_TX_OK;
836}
837
838/*
839 * Update the current statistics from the internal statistics registers.
840 */
841static struct net_device_stats *at91ether_stats(struct net_device *dev)
842{
843 int ale, lenerr, seqe, lcol, ecol;
844
845 if (netif_running(dev)) {
846 dev->stats.rx_packets += at91_emac_read(AT91_EMAC_OK); /* Good frames received */
847 ale = at91_emac_read(AT91_EMAC_ALE);
848 dev->stats.rx_frame_errors += ale; /* Alignment errors */
849 lenerr = at91_emac_read(AT91_EMAC_ELR) + at91_emac_read(AT91_EMAC_USF);
850 dev->stats.rx_length_errors += lenerr; /* Excessive Length or Undersize Frame error */
851 seqe = at91_emac_read(AT91_EMAC_SEQE);
852 dev->stats.rx_crc_errors += seqe; /* CRC error */
853 dev->stats.rx_fifo_errors += at91_emac_read(AT91_EMAC_DRFC); /* Receive buffer not available */
854 dev->stats.rx_errors += (ale + lenerr + seqe
855 + at91_emac_read(AT91_EMAC_CDE) + at91_emac_read(AT91_EMAC_RJB));
856
857 dev->stats.tx_packets += at91_emac_read(AT91_EMAC_FRA); /* Frames successfully transmitted */
858 dev->stats.tx_fifo_errors += at91_emac_read(AT91_EMAC_TUE); /* Transmit FIFO underruns */
859 dev->stats.tx_carrier_errors += at91_emac_read(AT91_EMAC_CSE); /* Carrier Sense errors */
860 dev->stats.tx_heartbeat_errors += at91_emac_read(AT91_EMAC_SQEE);/* Heartbeat error */
861
862 lcol = at91_emac_read(AT91_EMAC_LCOL);
863 ecol = at91_emac_read(AT91_EMAC_ECOL);
864 dev->stats.tx_window_errors += lcol; /* Late collisions */
865 dev->stats.tx_aborted_errors += ecol; /* 16 collisions */
866
867 dev->stats.collisions += (at91_emac_read(AT91_EMAC_SCOL) + at91_emac_read(AT91_EMAC_MCOL) + lcol + ecol);
868 }
869 return &dev->stats;
870}
871
872/*
873 * Extract received frame from buffer descriptors and sent to upper layers.
874 * (Called from interrupt context)
875 */
876static void at91ether_rx(struct net_device *dev)
877{
878 struct at91_private *lp = netdev_priv(dev);
879 struct recv_desc_bufs *dlist;
880 unsigned char *p_recv;
881 struct sk_buff *skb;
882 unsigned int pktlen;
883
884 dlist = lp->dlist;
885 while (dlist->descriptors[lp->rxBuffIndex].addr & EMAC_DESC_DONE) {
886 p_recv = dlist->recv_buf[lp->rxBuffIndex];
887 pktlen = dlist->descriptors[lp->rxBuffIndex].size & 0x7ff; /* Length of frame including FCS */
888 skb = dev_alloc_skb(pktlen + 2);
889 if (skb != NULL) {
890 skb_reserve(skb, 2);
891 memcpy(skb_put(skb, pktlen), p_recv, pktlen);
892
893 skb->protocol = eth_type_trans(skb, dev);
894 dev->stats.rx_bytes += pktlen;
895 netif_rx(skb);
896 }
897 else {
898 dev->stats.rx_dropped += 1;
899 printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
900 }
901
902 if (dlist->descriptors[lp->rxBuffIndex].size & EMAC_MULTICAST)
903 dev->stats.multicast++;
904
905 dlist->descriptors[lp->rxBuffIndex].addr &= ~EMAC_DESC_DONE; /* reset ownership bit */
906 if (lp->rxBuffIndex == MAX_RX_DESCR-1) /* wrap after last buffer */
907 lp->rxBuffIndex = 0;
908 else
909 lp->rxBuffIndex++;
910 }
911}
912
913/*
914 * MAC interrupt handler
915 */
916static irqreturn_t at91ether_interrupt(int irq, void *dev_id)
917{
918 struct net_device *dev = (struct net_device *) dev_id;
919 struct at91_private *lp = netdev_priv(dev);
920 unsigned long intstatus, ctl;
921
922 /* MAC Interrupt Status register indicates what interrupts are pending.
923 It is automatically cleared once read. */
924 intstatus = at91_emac_read(AT91_EMAC_ISR);
925
926 if (intstatus & AT91_EMAC_RCOM) /* Receive complete */
927 at91ether_rx(dev);
928
929 if (intstatus & AT91_EMAC_TCOM) { /* Transmit complete */
930 /* The TCOM bit is set even if the transmission failed. */
931 if (intstatus & (AT91_EMAC_TUND | AT91_EMAC_RTRY))
932 dev->stats.tx_errors += 1;
933
934 if (lp->skb) {
935 dev_kfree_skb_irq(lp->skb);
936 lp->skb = NULL;
937 dma_unmap_single(NULL, lp->skb_physaddr, lp->skb_length, DMA_TO_DEVICE);
938 }
939 netif_wake_queue(dev);
940 }
941
942 /* Work-around for Errata #11 */
943 if (intstatus & AT91_EMAC_RBNA) {
944 ctl = at91_emac_read(AT91_EMAC_CTL);
945 at91_emac_write(AT91_EMAC_CTL, ctl & ~AT91_EMAC_RE);
946 at91_emac_write(AT91_EMAC_CTL, ctl | AT91_EMAC_RE);
947 }
948
949 if (intstatus & AT91_EMAC_ROVR)
950 printk("%s: ROVR error\n", dev->name);
951
952 return IRQ_HANDLED;
953}
954
955#ifdef CONFIG_NET_POLL_CONTROLLER
956static void at91ether_poll_controller(struct net_device *dev)
957{
958 unsigned long flags;
959
960 local_irq_save(flags);
961 at91ether_interrupt(dev->irq, dev);
962 local_irq_restore(flags);
963}
964#endif
965
966static const struct net_device_ops at91ether_netdev_ops = {
967 .ndo_open = at91ether_open,
968 .ndo_stop = at91ether_close,
969 .ndo_start_xmit = at91ether_start_xmit,
970 .ndo_get_stats = at91ether_stats,
971 .ndo_set_multicast_list = at91ether_set_multicast_list,
972 .ndo_set_mac_address = set_mac_address,
973 .ndo_do_ioctl = at91ether_ioctl,
974 .ndo_validate_addr = eth_validate_addr,
975 .ndo_change_mtu = eth_change_mtu,
976#ifdef CONFIG_NET_POLL_CONTROLLER
977 .ndo_poll_controller = at91ether_poll_controller,
978#endif
979};
980
981/*
982 * Initialize the ethernet interface
983 */
984static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_address,
985 struct platform_device *pdev, struct clk *ether_clk)
986{
987 struct at91_eth_data *board_data = pdev->dev.platform_data;
988 struct net_device *dev;
989 struct at91_private *lp;
990 unsigned int val;
991 int res;
992
993 dev = alloc_etherdev(sizeof(struct at91_private));
994 if (!dev)
995 return -ENOMEM;
996
997 dev->base_addr = AT91_VA_BASE_EMAC;
998 dev->irq = AT91RM9200_ID_EMAC;
999
1000 /* Install the interrupt handler */
1001 if (request_irq(dev->irq, at91ether_interrupt, 0, dev->name, dev)) {
1002 free_netdev(dev);
1003 return -EBUSY;
1004 }
1005
1006 /* Allocate memory for DMA Receive descriptors */
1007 lp = netdev_priv(dev);
1008 lp->dlist = (struct recv_desc_bufs *) dma_alloc_coherent(NULL, sizeof(struct recv_desc_bufs), (dma_addr_t *) &lp->dlist_phys, GFP_KERNEL);
1009 if (lp->dlist == NULL) {
1010 free_irq(dev->irq, dev);
1011 free_netdev(dev);
1012 return -ENOMEM;
1013 }
1014 lp->board_data = *board_data;
1015 lp->ether_clk = ether_clk;
1016 platform_set_drvdata(pdev, dev);
1017
1018 spin_lock_init(&lp->lock);
1019
1020 ether_setup(dev);
1021 dev->netdev_ops = &at91ether_netdev_ops;
1022 dev->ethtool_ops = &at91ether_ethtool_ops;
1023
1024 SET_NETDEV_DEV(dev, &pdev->dev);
1025
1026 get_mac_address(dev); /* Get ethernet address and store it in dev->dev_addr */
1027 update_mac_address(dev); /* Program ethernet address into MAC */
1028
1029 at91_emac_write(AT91_EMAC_CTL, 0);
1030
1031 if (lp->board_data.is_rmii)
1032 at91_emac_write(AT91_EMAC_CFG, AT91_EMAC_CLK_DIV32 | AT91_EMAC_BIG | AT91_EMAC_RMII);
1033 else
1034 at91_emac_write(AT91_EMAC_CFG, AT91_EMAC_CLK_DIV32 | AT91_EMAC_BIG);
1035
1036 /* Perform PHY-specific initialization */
1037 spin_lock_irq(&lp->lock);
1038 enable_mdi();
1039 if ((phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) {
1040 read_phy(phy_address, MII_DSCR_REG, &val);
1041 if ((val & (1 << 10)) == 0) /* DSCR bit 10 is 0 -- fiber mode */
1042 lp->phy_media = PORT_FIBRE;
1043 } else if (machine_is_csb337()) {
1044 /* mix link activity status into LED2 link state */
1045 write_phy(phy_address, MII_LEDCTRL_REG, 0x0d22);
1046 } else if (machine_is_ecbat91())
1047 write_phy(phy_address, MII_LEDCTRL_REG, 0x156A);
1048
1049 disable_mdi();
1050 spin_unlock_irq(&lp->lock);
1051
1052 lp->mii.dev = dev; /* Support for ethtool */
1053 lp->mii.mdio_read = mdio_read;
1054 lp->mii.mdio_write = mdio_write;
1055 lp->mii.phy_id = phy_address;
1056 lp->mii.phy_id_mask = 0x1f;
1057 lp->mii.reg_num_mask = 0x1f;
1058
1059 lp->phy_type = phy_type; /* Type of PHY connected */
1060 lp->phy_address = phy_address; /* MDI address of PHY */
1061
1062 /* Register the network interface */
1063 res = register_netdev(dev);
1064 if (res) {
1065 free_irq(dev->irq, dev);
1066 free_netdev(dev);
1067 dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys);
1068 return res;
1069 }
1070
1071 /* Determine current link speed */
1072 spin_lock_irq(&lp->lock);
1073 enable_mdi();
1074 update_linkspeed(dev, 0);
1075 disable_mdi();
1076 spin_unlock_irq(&lp->lock);
1077 netif_carrier_off(dev); /* will be enabled in open() */
1078
1079 /* If board has no PHY IRQ, use a timer to poll the PHY */
1080 if (!lp->board_data.phy_irq_pin) {
1081 init_timer(&lp->check_timer);
1082 lp->check_timer.data = (unsigned long)dev;
1083 lp->check_timer.function = at91ether_check_link;
1084 } else if (lp->board_data.phy_irq_pin >= 32)
1085 gpio_request(lp->board_data.phy_irq_pin, "ethernet_phy");
1086
1087 /* Display ethernet banner */
1088 printk(KERN_INFO "%s: AT91 ethernet at 0x%08x int=%d %s%s (%pM)\n",
1089 dev->name, (uint) dev->base_addr, dev->irq,
1090 at91_emac_read(AT91_EMAC_CFG) & AT91_EMAC_SPD ? "100-" : "10-",
1091 at91_emac_read(AT91_EMAC_CFG) & AT91_EMAC_FD ? "FullDuplex" : "HalfDuplex",
1092 dev->dev_addr);
1093 if ((phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID))
1094 printk(KERN_INFO "%s: Davicom 9161 PHY %s\n", dev->name, (lp->phy_media == PORT_FIBRE) ? "(Fiber)" : "(Copper)");
1095 else if (phy_type == MII_LXT971A_ID)
1096 printk(KERN_INFO "%s: Intel LXT971A PHY\n", dev->name);
1097 else if (phy_type == MII_RTL8201_ID)
1098 printk(KERN_INFO "%s: Realtek RTL8201(B)L PHY\n", dev->name);
1099 else if (phy_type == MII_BCM5221_ID)
1100 printk(KERN_INFO "%s: Broadcom BCM5221 PHY\n", dev->name);
1101 else if (phy_type == MII_DP83847_ID)
1102 printk(KERN_INFO "%s: National Semiconductor DP83847 PHY\n", dev->name);
1103 else if (phy_type == MII_DP83848_ID)
1104 printk(KERN_INFO "%s: National Semiconductor DP83848 PHY\n", dev->name);
1105 else if (phy_type == MII_AC101L_ID)
1106 printk(KERN_INFO "%s: Altima AC101L PHY\n", dev->name);
1107 else if (phy_type == MII_KS8721_ID)
1108 printk(KERN_INFO "%s: Micrel KS8721 PHY\n", dev->name);
1109 else if (phy_type == MII_T78Q21x3_ID)
1110 printk(KERN_INFO "%s: Teridian 78Q21x3 PHY\n", dev->name);
1111 else if (phy_type == MII_LAN83C185_ID)
1112 printk(KERN_INFO "%s: SMSC LAN83C185 PHY\n", dev->name);
1113
1114 return 0;
1115}
1116
1117/*
1118 * Detect MAC and PHY and perform initialization
1119 */
1120static int __init at91ether_probe(struct platform_device *pdev)
1121{
1122 unsigned int phyid1, phyid2;
1123 int detected = -1;
1124 unsigned long phy_id;
1125 unsigned short phy_address = 0;
1126 struct clk *ether_clk;
1127
1128 ether_clk = clk_get(&pdev->dev, "ether_clk");
1129 if (IS_ERR(ether_clk)) {
1130 printk(KERN_ERR "at91_ether: no clock defined\n");
1131 return -ENODEV;
1132 }
1133 clk_enable(ether_clk); /* Enable Peripheral clock */
1134
1135 while ((detected != 0) && (phy_address < 32)) {
1136 /* Read the PHY ID registers */
1137 enable_mdi();
1138 read_phy(phy_address, MII_PHYSID1, &phyid1);
1139 read_phy(phy_address, MII_PHYSID2, &phyid2);
1140 disable_mdi();
1141
1142 phy_id = (phyid1 << 16) | (phyid2 & 0xfff0);
1143 switch (phy_id) {
1144 case MII_DM9161_ID: /* Davicom 9161: PHY_ID1 = 0x181, PHY_ID2 = B881 */
1145 case MII_DM9161A_ID: /* Davicom 9161A: PHY_ID1 = 0x181, PHY_ID2 = B8A0 */
1146 case MII_LXT971A_ID: /* Intel LXT971A: PHY_ID1 = 0x13, PHY_ID2 = 78E0 */
1147 case MII_RTL8201_ID: /* Realtek RTL8201: PHY_ID1 = 0, PHY_ID2 = 0x8201 */
1148 case MII_BCM5221_ID: /* Broadcom BCM5221: PHY_ID1 = 0x40, PHY_ID2 = 0x61e0 */
1149 case MII_DP83847_ID: /* National Semiconductor DP83847: */
1150 case MII_DP83848_ID: /* National Semiconductor DP83848: */
1151 case MII_AC101L_ID: /* Altima AC101L: PHY_ID1 = 0x22, PHY_ID2 = 0x5520 */
1152 case MII_KS8721_ID: /* Micrel KS8721: PHY_ID1 = 0x22, PHY_ID2 = 0x1610 */
1153 case MII_T78Q21x3_ID: /* Teridian 78Q21x3: PHY_ID1 = 0x0E, PHY_ID2 = 7237 */
1154 case MII_LAN83C185_ID: /* SMSC LAN83C185: PHY_ID1 = 0x0007, PHY_ID2 = 0xC0A1 */
1155 detected = at91ether_setup(phy_id, phy_address, pdev, ether_clk);
1156 break;
1157 }
1158
1159 phy_address++;
1160 }
1161
1162 clk_disable(ether_clk); /* Disable Peripheral clock */
1163
1164 return detected;
1165}
1166
1167static int __devexit at91ether_remove(struct platform_device *pdev)
1168{
1169 struct net_device *dev = platform_get_drvdata(pdev);
1170 struct at91_private *lp = netdev_priv(dev);
1171
1172 if (lp->board_data.phy_irq_pin >= 32)
1173 gpio_free(lp->board_data.phy_irq_pin);
1174
1175 unregister_netdev(dev);
1176 free_irq(dev->irq, dev);
1177 dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys);
1178 clk_put(lp->ether_clk);
1179
1180 platform_set_drvdata(pdev, NULL);
1181 free_netdev(dev);
1182 return 0;
1183}
1184
1185#ifdef CONFIG_PM
1186
1187static int at91ether_suspend(struct platform_device *pdev, pm_message_t mesg)
1188{
1189 struct net_device *net_dev = platform_get_drvdata(pdev);
1190 struct at91_private *lp = netdev_priv(net_dev);
1191 int phy_irq = lp->board_data.phy_irq_pin;
1192
1193 if (netif_running(net_dev)) {
1194 if (phy_irq)
1195 disable_irq(phy_irq);
1196
1197 netif_stop_queue(net_dev);
1198 netif_device_detach(net_dev);
1199
1200 clk_disable(lp->ether_clk);
1201 }
1202 return 0;
1203}
1204
1205static int at91ether_resume(struct platform_device *pdev)
1206{
1207 struct net_device *net_dev = platform_get_drvdata(pdev);
1208 struct at91_private *lp = netdev_priv(net_dev);
1209 int phy_irq = lp->board_data.phy_irq_pin;
1210
1211 if (netif_running(net_dev)) {
1212 clk_enable(lp->ether_clk);
1213
1214 netif_device_attach(net_dev);
1215 netif_start_queue(net_dev);
1216
1217 if (phy_irq)
1218 enable_irq(phy_irq);
1219 }
1220 return 0;
1221}
1222
1223#else
1224#define at91ether_suspend NULL
1225#define at91ether_resume NULL
1226#endif
1227
1228static struct platform_driver at91ether_driver = {
1229 .remove = __devexit_p(at91ether_remove),
1230 .suspend = at91ether_suspend,
1231 .resume = at91ether_resume,
1232 .driver = {
1233 .name = DRV_NAME,
1234 .owner = THIS_MODULE,
1235 },
1236};
1237
1238static int __init at91ether_init(void)
1239{
1240 return platform_driver_probe(&at91ether_driver, at91ether_probe);
1241}
1242
1243static void __exit at91ether_exit(void)
1244{
1245 platform_driver_unregister(&at91ether_driver);
1246}
1247
1248module_init(at91ether_init)
1249module_exit(at91ether_exit)
1250
1251MODULE_LICENSE("GPL");
1252MODULE_DESCRIPTION("AT91RM9200 EMAC Ethernet driver");
1253MODULE_AUTHOR("Andrew Victor");
1254MODULE_ALIAS("platform:" DRV_NAME);