Loading...
1/*
2 * linux/drivers/mmc/host/mmci.h - ARM PrimeCell MMCI PL180/1 driver
3 *
4 * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
10#define MMCIPOWER 0x000
11#define MCI_PWR_OFF 0x00
12#define MCI_PWR_UP 0x02
13#define MCI_PWR_ON 0x03
14#define MCI_OD (1 << 6)
15#define MCI_ROD (1 << 7)
16/*
17 * The ST Micro version does not have ROD and reuse the voltage registers
18 * for direction settings
19 */
20#define MCI_ST_DATA2DIREN (1 << 2)
21#define MCI_ST_CMDDIREN (1 << 3)
22#define MCI_ST_DATA0DIREN (1 << 4)
23#define MCI_ST_DATA31DIREN (1 << 5)
24#define MCI_ST_FBCLKEN (1 << 7)
25#define MCI_ST_DATA74DIREN (1 << 8)
26
27#define MMCICLOCK 0x004
28#define MCI_CLK_ENABLE (1 << 8)
29#define MCI_CLK_PWRSAVE (1 << 9)
30#define MCI_CLK_BYPASS (1 << 10)
31#define MCI_4BIT_BUS (1 << 11)
32/*
33 * 8bit wide buses, hardware flow contronl, negative edges and clock inversion
34 * supported in ST Micro U300 and Ux500 versions
35 */
36#define MCI_ST_8BIT_BUS (1 << 12)
37#define MCI_ST_U300_HWFCEN (1 << 13)
38#define MCI_ST_UX500_NEG_EDGE (1 << 13)
39#define MCI_ST_UX500_HWFCEN (1 << 14)
40#define MCI_ST_UX500_CLK_INV (1 << 15)
41
42#define MMCIARGUMENT 0x008
43#define MMCICOMMAND 0x00c
44#define MCI_CPSM_RESPONSE (1 << 6)
45#define MCI_CPSM_LONGRSP (1 << 7)
46#define MCI_CPSM_INTERRUPT (1 << 8)
47#define MCI_CPSM_PENDING (1 << 9)
48#define MCI_CPSM_ENABLE (1 << 10)
49#define MCI_SDIO_SUSP (1 << 11)
50#define MCI_ENCMD_COMPL (1 << 12)
51#define MCI_NIEN (1 << 13)
52#define MCI_CE_ATACMD (1 << 14)
53
54#define MMCIRESPCMD 0x010
55#define MMCIRESPONSE0 0x014
56#define MMCIRESPONSE1 0x018
57#define MMCIRESPONSE2 0x01c
58#define MMCIRESPONSE3 0x020
59#define MMCIDATATIMER 0x024
60#define MMCIDATALENGTH 0x028
61#define MMCIDATACTRL 0x02c
62#define MCI_DPSM_ENABLE (1 << 0)
63#define MCI_DPSM_DIRECTION (1 << 1)
64#define MCI_DPSM_MODE (1 << 2)
65#define MCI_DPSM_DMAENABLE (1 << 3)
66#define MCI_DPSM_BLOCKSIZE (1 << 4)
67/* Control register extensions in the ST Micro U300 and Ux500 versions */
68#define MCI_ST_DPSM_RWSTART (1 << 8)
69#define MCI_ST_DPSM_RWSTOP (1 << 9)
70#define MCI_ST_DPSM_RWMOD (1 << 10)
71#define MCI_ST_DPSM_SDIOEN (1 << 11)
72/* Control register extensions in the ST Micro Ux500 versions */
73#define MCI_ST_DPSM_DMAREQCTL (1 << 12)
74#define MCI_ST_DPSM_DBOOTMODEEN (1 << 13)
75#define MCI_ST_DPSM_BUSYMODE (1 << 14)
76#define MCI_ST_DPSM_DDRMODE (1 << 15)
77
78#define MMCIDATACNT 0x030
79#define MMCISTATUS 0x034
80#define MCI_CMDCRCFAIL (1 << 0)
81#define MCI_DATACRCFAIL (1 << 1)
82#define MCI_CMDTIMEOUT (1 << 2)
83#define MCI_DATATIMEOUT (1 << 3)
84#define MCI_TXUNDERRUN (1 << 4)
85#define MCI_RXOVERRUN (1 << 5)
86#define MCI_CMDRESPEND (1 << 6)
87#define MCI_CMDSENT (1 << 7)
88#define MCI_DATAEND (1 << 8)
89#define MCI_STARTBITERR (1 << 9)
90#define MCI_DATABLOCKEND (1 << 10)
91#define MCI_CMDACTIVE (1 << 11)
92#define MCI_TXACTIVE (1 << 12)
93#define MCI_RXACTIVE (1 << 13)
94#define MCI_TXFIFOHALFEMPTY (1 << 14)
95#define MCI_RXFIFOHALFFULL (1 << 15)
96#define MCI_TXFIFOFULL (1 << 16)
97#define MCI_RXFIFOFULL (1 << 17)
98#define MCI_TXFIFOEMPTY (1 << 18)
99#define MCI_RXFIFOEMPTY (1 << 19)
100#define MCI_TXDATAAVLBL (1 << 20)
101#define MCI_RXDATAAVLBL (1 << 21)
102/* Extended status bits for the ST Micro variants */
103#define MCI_ST_SDIOIT (1 << 22)
104#define MCI_ST_CEATAEND (1 << 23)
105
106#define MMCICLEAR 0x038
107#define MCI_CMDCRCFAILCLR (1 << 0)
108#define MCI_DATACRCFAILCLR (1 << 1)
109#define MCI_CMDTIMEOUTCLR (1 << 2)
110#define MCI_DATATIMEOUTCLR (1 << 3)
111#define MCI_TXUNDERRUNCLR (1 << 4)
112#define MCI_RXOVERRUNCLR (1 << 5)
113#define MCI_CMDRESPENDCLR (1 << 6)
114#define MCI_CMDSENTCLR (1 << 7)
115#define MCI_DATAENDCLR (1 << 8)
116#define MCI_STARTBITERRCLR (1 << 9)
117#define MCI_DATABLOCKENDCLR (1 << 10)
118/* Extended status bits for the ST Micro variants */
119#define MCI_ST_SDIOITC (1 << 22)
120#define MCI_ST_CEATAENDC (1 << 23)
121
122#define MMCIMASK0 0x03c
123#define MCI_CMDCRCFAILMASK (1 << 0)
124#define MCI_DATACRCFAILMASK (1 << 1)
125#define MCI_CMDTIMEOUTMASK (1 << 2)
126#define MCI_DATATIMEOUTMASK (1 << 3)
127#define MCI_TXUNDERRUNMASK (1 << 4)
128#define MCI_RXOVERRUNMASK (1 << 5)
129#define MCI_CMDRESPENDMASK (1 << 6)
130#define MCI_CMDSENTMASK (1 << 7)
131#define MCI_DATAENDMASK (1 << 8)
132#define MCI_STARTBITERRMASK (1 << 9)
133#define MCI_DATABLOCKENDMASK (1 << 10)
134#define MCI_CMDACTIVEMASK (1 << 11)
135#define MCI_TXACTIVEMASK (1 << 12)
136#define MCI_RXACTIVEMASK (1 << 13)
137#define MCI_TXFIFOHALFEMPTYMASK (1 << 14)
138#define MCI_RXFIFOHALFFULLMASK (1 << 15)
139#define MCI_TXFIFOFULLMASK (1 << 16)
140#define MCI_RXFIFOFULLMASK (1 << 17)
141#define MCI_TXFIFOEMPTYMASK (1 << 18)
142#define MCI_RXFIFOEMPTYMASK (1 << 19)
143#define MCI_TXDATAAVLBLMASK (1 << 20)
144#define MCI_RXDATAAVLBLMASK (1 << 21)
145/* Extended status bits for the ST Micro variants */
146#define MCI_ST_SDIOITMASK (1 << 22)
147#define MCI_ST_CEATAENDMASK (1 << 23)
148
149#define MMCIMASK1 0x040
150#define MMCIFIFOCNT 0x048
151#define MMCIFIFO 0x080 /* to 0x0bc */
152
153#define MCI_IRQENABLE \
154 (MCI_CMDCRCFAILMASK|MCI_DATACRCFAILMASK|MCI_CMDTIMEOUTMASK| \
155 MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK| \
156 MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_STARTBITERRMASK)
157
158/* These interrupts are directed to IRQ1 when two IRQ lines are available */
159#define MCI_IRQ1MASK \
160 (MCI_RXFIFOHALFFULLMASK | MCI_RXDATAAVLBLMASK | \
161 MCI_TXFIFOHALFEMPTYMASK)
162
163#define NR_SG 16
164
165struct clk;
166struct variant_data;
167struct dma_chan;
168
169struct mmci_host_next {
170 struct dma_async_tx_descriptor *dma_desc;
171 struct dma_chan *dma_chan;
172 s32 cookie;
173};
174
175struct mmci_host {
176 phys_addr_t phybase;
177 void __iomem *base;
178 struct mmc_request *mrq;
179 struct mmc_command *cmd;
180 struct mmc_data *data;
181 struct mmc_host *mmc;
182 struct clk *clk;
183 int gpio_cd;
184 int gpio_wp;
185 int gpio_cd_irq;
186 bool singleirq;
187
188 spinlock_t lock;
189
190 unsigned int mclk;
191 unsigned int cclk;
192 u32 pwr;
193 struct mmci_platform_data *plat;
194 struct variant_data *variant;
195
196 u8 hw_designer;
197 u8 hw_revision:4;
198
199 struct timer_list timer;
200 unsigned int oldstat;
201
202 /* pio stuff */
203 struct sg_mapping_iter sg_miter;
204 unsigned int size;
205 struct regulator *vcc;
206
207#ifdef CONFIG_DMA_ENGINE
208 /* DMA stuff */
209 struct dma_chan *dma_current;
210 struct dma_chan *dma_rx_channel;
211 struct dma_chan *dma_tx_channel;
212 struct dma_async_tx_descriptor *dma_desc_current;
213 struct mmci_host_next next_data;
214
215#define dma_inprogress(host) ((host)->dma_current)
216#else
217#define dma_inprogress(host) (0)
218#endif
219};
220
1/*
2 * linux/drivers/mmc/host/mmci.h - ARM PrimeCell MMCI PL180/1 driver
3 *
4 * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
10#define MMCIPOWER 0x000
11#define MCI_PWR_OFF 0x00
12#define MCI_PWR_UP 0x02
13#define MCI_PWR_ON 0x03
14#define MCI_OD (1 << 6)
15#define MCI_ROD (1 << 7)
16/*
17 * The ST Micro version does not have ROD and reuse the voltage registers for
18 * direction settings.
19 */
20#define MCI_ST_DATA2DIREN (1 << 2)
21#define MCI_ST_CMDDIREN (1 << 3)
22#define MCI_ST_DATA0DIREN (1 << 4)
23#define MCI_ST_DATA31DIREN (1 << 5)
24#define MCI_ST_FBCLKEN (1 << 7)
25#define MCI_ST_DATA74DIREN (1 << 8)
26
27#define MMCICLOCK 0x004
28#define MCI_CLK_ENABLE (1 << 8)
29#define MCI_CLK_PWRSAVE (1 << 9)
30#define MCI_CLK_BYPASS (1 << 10)
31#define MCI_4BIT_BUS (1 << 11)
32/*
33 * 8bit wide buses, hardware flow contronl, negative edges and clock inversion
34 * supported in ST Micro U300 and Ux500 versions
35 */
36#define MCI_ST_8BIT_BUS (1 << 12)
37#define MCI_ST_U300_HWFCEN (1 << 13)
38#define MCI_ST_UX500_NEG_EDGE (1 << 13)
39#define MCI_ST_UX500_HWFCEN (1 << 14)
40#define MCI_ST_UX500_CLK_INV (1 << 15)
41/* Modified PL180 on Versatile Express platform */
42#define MCI_ARM_HWFCEN (1 << 12)
43
44/* Modified on Qualcomm Integrations */
45#define MCI_QCOM_CLK_WIDEBUS_8 (BIT(10) | BIT(11))
46#define MCI_QCOM_CLK_FLOWENA BIT(12)
47#define MCI_QCOM_CLK_INVERTOUT BIT(13)
48
49/* select in latch data and command in */
50#define MCI_QCOM_CLK_SELECT_IN_FBCLK BIT(15)
51#define MCI_QCOM_CLK_SELECT_IN_DDR_MODE (BIT(14) | BIT(15))
52
53#define MMCIARGUMENT 0x008
54#define MMCICOMMAND 0x00c
55#define MCI_CPSM_RESPONSE (1 << 6)
56#define MCI_CPSM_LONGRSP (1 << 7)
57#define MCI_CPSM_INTERRUPT (1 << 8)
58#define MCI_CPSM_PENDING (1 << 9)
59#define MCI_CPSM_ENABLE (1 << 10)
60/* Argument flag extenstions in the ST Micro versions */
61#define MCI_ST_SDIO_SUSP (1 << 11)
62#define MCI_ST_ENCMD_COMPL (1 << 12)
63#define MCI_ST_NIEN (1 << 13)
64#define MCI_ST_CE_ATACMD (1 << 14)
65
66/* Modified on Qualcomm Integrations */
67#define MCI_QCOM_CSPM_DATCMD BIT(12)
68#define MCI_QCOM_CSPM_MCIABORT BIT(13)
69#define MCI_QCOM_CSPM_CCSENABLE BIT(14)
70#define MCI_QCOM_CSPM_CCSDISABLE BIT(15)
71#define MCI_QCOM_CSPM_AUTO_CMD19 BIT(16)
72#define MCI_QCOM_CSPM_AUTO_CMD21 BIT(21)
73
74#define MMCIRESPCMD 0x010
75#define MMCIRESPONSE0 0x014
76#define MMCIRESPONSE1 0x018
77#define MMCIRESPONSE2 0x01c
78#define MMCIRESPONSE3 0x020
79#define MMCIDATATIMER 0x024
80#define MMCIDATALENGTH 0x028
81#define MMCIDATACTRL 0x02c
82#define MCI_DPSM_ENABLE (1 << 0)
83#define MCI_DPSM_DIRECTION (1 << 1)
84#define MCI_DPSM_MODE (1 << 2)
85#define MCI_DPSM_DMAENABLE (1 << 3)
86#define MCI_DPSM_BLOCKSIZE (1 << 4)
87/* Control register extensions in the ST Micro U300 and Ux500 versions */
88#define MCI_ST_DPSM_RWSTART (1 << 8)
89#define MCI_ST_DPSM_RWSTOP (1 << 9)
90#define MCI_ST_DPSM_RWMOD (1 << 10)
91#define MCI_ST_DPSM_SDIOEN (1 << 11)
92/* Control register extensions in the ST Micro Ux500 versions */
93#define MCI_ST_DPSM_DMAREQCTL (1 << 12)
94#define MCI_ST_DPSM_DBOOTMODEEN (1 << 13)
95#define MCI_ST_DPSM_BUSYMODE (1 << 14)
96#define MCI_ST_DPSM_DDRMODE (1 << 15)
97
98#define MMCIDATACNT 0x030
99#define MMCISTATUS 0x034
100#define MCI_CMDCRCFAIL (1 << 0)
101#define MCI_DATACRCFAIL (1 << 1)
102#define MCI_CMDTIMEOUT (1 << 2)
103#define MCI_DATATIMEOUT (1 << 3)
104#define MCI_TXUNDERRUN (1 << 4)
105#define MCI_RXOVERRUN (1 << 5)
106#define MCI_CMDRESPEND (1 << 6)
107#define MCI_CMDSENT (1 << 7)
108#define MCI_DATAEND (1 << 8)
109#define MCI_STARTBITERR (1 << 9)
110#define MCI_DATABLOCKEND (1 << 10)
111#define MCI_CMDACTIVE (1 << 11)
112#define MCI_TXACTIVE (1 << 12)
113#define MCI_RXACTIVE (1 << 13)
114#define MCI_TXFIFOHALFEMPTY (1 << 14)
115#define MCI_RXFIFOHALFFULL (1 << 15)
116#define MCI_TXFIFOFULL (1 << 16)
117#define MCI_RXFIFOFULL (1 << 17)
118#define MCI_TXFIFOEMPTY (1 << 18)
119#define MCI_RXFIFOEMPTY (1 << 19)
120#define MCI_TXDATAAVLBL (1 << 20)
121#define MCI_RXDATAAVLBL (1 << 21)
122/* Extended status bits for the ST Micro variants */
123#define MCI_ST_SDIOIT (1 << 22)
124#define MCI_ST_CEATAEND (1 << 23)
125#define MCI_ST_CARDBUSY (1 << 24)
126
127#define MMCICLEAR 0x038
128#define MCI_CMDCRCFAILCLR (1 << 0)
129#define MCI_DATACRCFAILCLR (1 << 1)
130#define MCI_CMDTIMEOUTCLR (1 << 2)
131#define MCI_DATATIMEOUTCLR (1 << 3)
132#define MCI_TXUNDERRUNCLR (1 << 4)
133#define MCI_RXOVERRUNCLR (1 << 5)
134#define MCI_CMDRESPENDCLR (1 << 6)
135#define MCI_CMDSENTCLR (1 << 7)
136#define MCI_DATAENDCLR (1 << 8)
137#define MCI_STARTBITERRCLR (1 << 9)
138#define MCI_DATABLOCKENDCLR (1 << 10)
139/* Extended status bits for the ST Micro variants */
140#define MCI_ST_SDIOITC (1 << 22)
141#define MCI_ST_CEATAENDC (1 << 23)
142#define MCI_ST_BUSYENDC (1 << 24)
143
144#define MMCIMASK0 0x03c
145#define MCI_CMDCRCFAILMASK (1 << 0)
146#define MCI_DATACRCFAILMASK (1 << 1)
147#define MCI_CMDTIMEOUTMASK (1 << 2)
148#define MCI_DATATIMEOUTMASK (1 << 3)
149#define MCI_TXUNDERRUNMASK (1 << 4)
150#define MCI_RXOVERRUNMASK (1 << 5)
151#define MCI_CMDRESPENDMASK (1 << 6)
152#define MCI_CMDSENTMASK (1 << 7)
153#define MCI_DATAENDMASK (1 << 8)
154#define MCI_STARTBITERRMASK (1 << 9)
155#define MCI_DATABLOCKENDMASK (1 << 10)
156#define MCI_CMDACTIVEMASK (1 << 11)
157#define MCI_TXACTIVEMASK (1 << 12)
158#define MCI_RXACTIVEMASK (1 << 13)
159#define MCI_TXFIFOHALFEMPTYMASK (1 << 14)
160#define MCI_RXFIFOHALFFULLMASK (1 << 15)
161#define MCI_TXFIFOFULLMASK (1 << 16)
162#define MCI_RXFIFOFULLMASK (1 << 17)
163#define MCI_TXFIFOEMPTYMASK (1 << 18)
164#define MCI_RXFIFOEMPTYMASK (1 << 19)
165#define MCI_TXDATAAVLBLMASK (1 << 20)
166#define MCI_RXDATAAVLBLMASK (1 << 21)
167/* Extended status bits for the ST Micro variants */
168#define MCI_ST_SDIOITMASK (1 << 22)
169#define MCI_ST_CEATAENDMASK (1 << 23)
170#define MCI_ST_BUSYEND (1 << 24)
171
172#define MMCIMASK1 0x040
173#define MMCIFIFOCNT 0x048
174#define MMCIFIFO 0x080 /* to 0x0bc */
175
176#define MCI_IRQENABLE \
177 (MCI_CMDCRCFAILMASK|MCI_DATACRCFAILMASK|MCI_CMDTIMEOUTMASK| \
178 MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK| \
179 MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_STARTBITERRMASK)
180
181/* These interrupts are directed to IRQ1 when two IRQ lines are available */
182#define MCI_IRQ1MASK \
183 (MCI_RXFIFOHALFFULLMASK | MCI_RXDATAAVLBLMASK | \
184 MCI_TXFIFOHALFEMPTYMASK)
185
186#define NR_SG 128
187
188struct clk;
189struct variant_data;
190struct dma_chan;
191
192struct mmci_host_next {
193 struct dma_async_tx_descriptor *dma_desc;
194 struct dma_chan *dma_chan;
195 s32 cookie;
196};
197
198struct mmci_host {
199 phys_addr_t phybase;
200 void __iomem *base;
201 struct mmc_request *mrq;
202 struct mmc_command *cmd;
203 struct mmc_data *data;
204 struct mmc_host *mmc;
205 struct clk *clk;
206 bool singleirq;
207
208 spinlock_t lock;
209
210 unsigned int mclk;
211 /* cached value of requested clk in set_ios */
212 unsigned int clock_cache;
213 unsigned int cclk;
214 u32 pwr_reg;
215 u32 pwr_reg_add;
216 u32 clk_reg;
217 u32 datactrl_reg;
218 u32 busy_status;
219 bool vqmmc_enabled;
220 struct mmci_platform_data *plat;
221 struct variant_data *variant;
222
223 u8 hw_designer;
224 u8 hw_revision:4;
225
226 struct timer_list timer;
227 unsigned int oldstat;
228
229 /* pio stuff */
230 struct sg_mapping_iter sg_miter;
231 unsigned int size;
232 int (*get_rx_fifocnt)(struct mmci_host *h, u32 status, int remain);
233
234#ifdef CONFIG_DMA_ENGINE
235 /* DMA stuff */
236 struct dma_chan *dma_current;
237 struct dma_chan *dma_rx_channel;
238 struct dma_chan *dma_tx_channel;
239 struct dma_async_tx_descriptor *dma_desc_current;
240 struct mmci_host_next next_data;
241
242#define dma_inprogress(host) ((host)->dma_current)
243#else
244#define dma_inprogress(host) (0)
245#endif
246};
247