Loading...
1/*
2 * Copyright 2008 Intel Corporation <hong.liu@intel.com>
3 * Copyright 2008 Red Hat <mjg@redhat.com>
4 *
5 * Permission is hereby granted, free of charge, to any person obtaining
6 * a copy of this software and associated documentation files (the
7 * "Software"), to deal in the Software without restriction, including
8 * without limitation the rights to use, copy, modify, merge, publish,
9 * distribute, sub license, and/or sell copies of the Software, and to
10 * permit persons to whom the Software is furnished to do so, subject to
11 * the following conditions:
12 *
13 * The above copyright notice and this permission notice (including the
14 * next paragraph) shall be included in all copies or substantial
15 * portions of the Software.
16 *
17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
18 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
19 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
20 * NON-INFRINGEMENT. IN NO EVENT SHALL INTEL AND/OR ITS SUPPLIERS BE
21 * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
22 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
23 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
24 * SOFTWARE.
25 *
26 */
27
28#include <linux/acpi.h>
29#include <linux/acpi_io.h>
30#include <acpi/video.h>
31
32#include "drmP.h"
33#include "i915_drm.h"
34#include "i915_drv.h"
35#include "intel_drv.h"
36
37#define PCI_ASLE 0xe4
38#define PCI_ASLS 0xfc
39
40#define OPREGION_HEADER_OFFSET 0
41#define OPREGION_ACPI_OFFSET 0x100
42#define ACPI_CLID 0x01ac /* current lid state indicator */
43#define ACPI_CDCK 0x01b0 /* current docking state indicator */
44#define OPREGION_SWSCI_OFFSET 0x200
45#define OPREGION_ASLE_OFFSET 0x300
46#define OPREGION_VBT_OFFSET 0x400
47
48#define OPREGION_SIGNATURE "IntelGraphicsMem"
49#define MBOX_ACPI (1<<0)
50#define MBOX_SWSCI (1<<1)
51#define MBOX_ASLE (1<<2)
52
53struct opregion_header {
54 u8 signature[16];
55 u32 size;
56 u32 opregion_ver;
57 u8 bios_ver[32];
58 u8 vbios_ver[16];
59 u8 driver_ver[16];
60 u32 mboxes;
61 u8 reserved[164];
62} __attribute__((packed));
63
64/* OpRegion mailbox #1: public ACPI methods */
65struct opregion_acpi {
66 u32 drdy; /* driver readiness */
67 u32 csts; /* notification status */
68 u32 cevt; /* current event */
69 u8 rsvd1[20];
70 u32 didl[8]; /* supported display devices ID list */
71 u32 cpdl[8]; /* currently presented display list */
72 u32 cadl[8]; /* currently active display list */
73 u32 nadl[8]; /* next active devices list */
74 u32 aslp; /* ASL sleep time-out */
75 u32 tidx; /* toggle table index */
76 u32 chpd; /* current hotplug enable indicator */
77 u32 clid; /* current lid state*/
78 u32 cdck; /* current docking state */
79 u32 sxsw; /* Sx state resume */
80 u32 evts; /* ASL supported events */
81 u32 cnot; /* current OS notification */
82 u32 nrdy; /* driver status */
83 u8 rsvd2[60];
84} __attribute__((packed));
85
86/* OpRegion mailbox #2: SWSCI */
87struct opregion_swsci {
88 u32 scic; /* SWSCI command|status|data */
89 u32 parm; /* command parameters */
90 u32 dslp; /* driver sleep time-out */
91 u8 rsvd[244];
92} __attribute__((packed));
93
94/* OpRegion mailbox #3: ASLE */
95struct opregion_asle {
96 u32 ardy; /* driver readiness */
97 u32 aslc; /* ASLE interrupt command */
98 u32 tche; /* technology enabled indicator */
99 u32 alsi; /* current ALS illuminance reading */
100 u32 bclp; /* backlight brightness to set */
101 u32 pfit; /* panel fitting state */
102 u32 cblv; /* current brightness level */
103 u16 bclm[20]; /* backlight level duty cycle mapping table */
104 u32 cpfm; /* current panel fitting mode */
105 u32 epfm; /* enabled panel fitting modes */
106 u8 plut[74]; /* panel LUT and identifier */
107 u32 pfmb; /* PWM freq and min brightness */
108 u8 rsvd[102];
109} __attribute__((packed));
110
111/* ASLE irq request bits */
112#define ASLE_SET_ALS_ILLUM (1 << 0)
113#define ASLE_SET_BACKLIGHT (1 << 1)
114#define ASLE_SET_PFIT (1 << 2)
115#define ASLE_SET_PWM_FREQ (1 << 3)
116#define ASLE_REQ_MSK 0xf
117
118/* response bits of ASLE irq request */
119#define ASLE_ALS_ILLUM_FAILED (1<<10)
120#define ASLE_BACKLIGHT_FAILED (1<<12)
121#define ASLE_PFIT_FAILED (1<<14)
122#define ASLE_PWM_FREQ_FAILED (1<<16)
123
124/* ASLE backlight brightness to set */
125#define ASLE_BCLP_VALID (1<<31)
126#define ASLE_BCLP_MSK (~(1<<31))
127
128/* ASLE panel fitting request */
129#define ASLE_PFIT_VALID (1<<31)
130#define ASLE_PFIT_CENTER (1<<0)
131#define ASLE_PFIT_STRETCH_TEXT (1<<1)
132#define ASLE_PFIT_STRETCH_GFX (1<<2)
133
134/* PWM frequency and minimum brightness */
135#define ASLE_PFMB_BRIGHTNESS_MASK (0xff)
136#define ASLE_PFMB_BRIGHTNESS_VALID (1<<8)
137#define ASLE_PFMB_PWM_MASK (0x7ffffe00)
138#define ASLE_PFMB_PWM_VALID (1<<31)
139
140#define ASLE_CBLV_VALID (1<<31)
141
142#define ACPI_OTHER_OUTPUT (0<<8)
143#define ACPI_VGA_OUTPUT (1<<8)
144#define ACPI_TV_OUTPUT (2<<8)
145#define ACPI_DIGITAL_OUTPUT (3<<8)
146#define ACPI_LVDS_OUTPUT (4<<8)
147
148#ifdef CONFIG_ACPI
149static u32 asle_set_backlight(struct drm_device *dev, u32 bclp)
150{
151 struct drm_i915_private *dev_priv = dev->dev_private;
152 struct opregion_asle *asle = dev_priv->opregion.asle;
153 u32 max;
154
155 if (!(bclp & ASLE_BCLP_VALID))
156 return ASLE_BACKLIGHT_FAILED;
157
158 bclp &= ASLE_BCLP_MSK;
159 if (bclp > 255)
160 return ASLE_BACKLIGHT_FAILED;
161
162 max = intel_panel_get_max_backlight(dev);
163 intel_panel_set_backlight(dev, bclp * max / 255);
164 asle->cblv = (bclp*0x64)/0xff | ASLE_CBLV_VALID;
165
166 return 0;
167}
168
169static u32 asle_set_als_illum(struct drm_device *dev, u32 alsi)
170{
171 /* alsi is the current ALS reading in lux. 0 indicates below sensor
172 range, 0xffff indicates above sensor range. 1-0xfffe are valid */
173 return 0;
174}
175
176static u32 asle_set_pwm_freq(struct drm_device *dev, u32 pfmb)
177{
178 struct drm_i915_private *dev_priv = dev->dev_private;
179 if (pfmb & ASLE_PFMB_PWM_VALID) {
180 u32 blc_pwm_ctl = I915_READ(BLC_PWM_CTL);
181 u32 pwm = pfmb & ASLE_PFMB_PWM_MASK;
182 blc_pwm_ctl &= BACKLIGHT_DUTY_CYCLE_MASK;
183 pwm = pwm >> 9;
184 /* FIXME - what do we do with the PWM? */
185 }
186 return 0;
187}
188
189static u32 asle_set_pfit(struct drm_device *dev, u32 pfit)
190{
191 /* Panel fitting is currently controlled by the X code, so this is a
192 noop until modesetting support works fully */
193 if (!(pfit & ASLE_PFIT_VALID))
194 return ASLE_PFIT_FAILED;
195 return 0;
196}
197
198void intel_opregion_asle_intr(struct drm_device *dev)
199{
200 struct drm_i915_private *dev_priv = dev->dev_private;
201 struct opregion_asle *asle = dev_priv->opregion.asle;
202 u32 asle_stat = 0;
203 u32 asle_req;
204
205 if (!asle)
206 return;
207
208 asle_req = asle->aslc & ASLE_REQ_MSK;
209
210 if (!asle_req) {
211 DRM_DEBUG_DRIVER("non asle set request??\n");
212 return;
213 }
214
215 if (asle_req & ASLE_SET_ALS_ILLUM)
216 asle_stat |= asle_set_als_illum(dev, asle->alsi);
217
218 if (asle_req & ASLE_SET_BACKLIGHT)
219 asle_stat |= asle_set_backlight(dev, asle->bclp);
220
221 if (asle_req & ASLE_SET_PFIT)
222 asle_stat |= asle_set_pfit(dev, asle->pfit);
223
224 if (asle_req & ASLE_SET_PWM_FREQ)
225 asle_stat |= asle_set_pwm_freq(dev, asle->pfmb);
226
227 asle->aslc = asle_stat;
228}
229
230void intel_opregion_gse_intr(struct drm_device *dev)
231{
232 struct drm_i915_private *dev_priv = dev->dev_private;
233 struct opregion_asle *asle = dev_priv->opregion.asle;
234 u32 asle_stat = 0;
235 u32 asle_req;
236
237 if (!asle)
238 return;
239
240 asle_req = asle->aslc & ASLE_REQ_MSK;
241
242 if (!asle_req) {
243 DRM_DEBUG_DRIVER("non asle set request??\n");
244 return;
245 }
246
247 if (asle_req & ASLE_SET_ALS_ILLUM) {
248 DRM_DEBUG_DRIVER("Illum is not supported\n");
249 asle_stat |= ASLE_ALS_ILLUM_FAILED;
250 }
251
252 if (asle_req & ASLE_SET_BACKLIGHT)
253 asle_stat |= asle_set_backlight(dev, asle->bclp);
254
255 if (asle_req & ASLE_SET_PFIT) {
256 DRM_DEBUG_DRIVER("Pfit is not supported\n");
257 asle_stat |= ASLE_PFIT_FAILED;
258 }
259
260 if (asle_req & ASLE_SET_PWM_FREQ) {
261 DRM_DEBUG_DRIVER("PWM freq is not supported\n");
262 asle_stat |= ASLE_PWM_FREQ_FAILED;
263 }
264
265 asle->aslc = asle_stat;
266}
267#define ASLE_ALS_EN (1<<0)
268#define ASLE_BLC_EN (1<<1)
269#define ASLE_PFIT_EN (1<<2)
270#define ASLE_PFMB_EN (1<<3)
271
272void intel_opregion_enable_asle(struct drm_device *dev)
273{
274 struct drm_i915_private *dev_priv = dev->dev_private;
275 struct opregion_asle *asle = dev_priv->opregion.asle;
276
277 if (asle) {
278 if (IS_MOBILE(dev))
279 intel_enable_asle(dev);
280
281 asle->tche = ASLE_ALS_EN | ASLE_BLC_EN | ASLE_PFIT_EN |
282 ASLE_PFMB_EN;
283 asle->ardy = 1;
284 }
285}
286
287#define ACPI_EV_DISPLAY_SWITCH (1<<0)
288#define ACPI_EV_LID (1<<1)
289#define ACPI_EV_DOCK (1<<2)
290
291static struct intel_opregion *system_opregion;
292
293static int intel_opregion_video_event(struct notifier_block *nb,
294 unsigned long val, void *data)
295{
296 /* The only video events relevant to opregion are 0x80. These indicate
297 either a docking event, lid switch or display switch request. In
298 Linux, these are handled by the dock, button and video drivers.
299 */
300
301 struct opregion_acpi *acpi;
302 struct acpi_bus_event *event = data;
303 int ret = NOTIFY_OK;
304
305 if (strcmp(event->device_class, ACPI_VIDEO_CLASS) != 0)
306 return NOTIFY_DONE;
307
308 if (!system_opregion)
309 return NOTIFY_DONE;
310
311 acpi = system_opregion->acpi;
312
313 if (event->type == 0x80 && !(acpi->cevt & 0x1))
314 ret = NOTIFY_BAD;
315
316 acpi->csts = 0;
317
318 return ret;
319}
320
321static struct notifier_block intel_opregion_notifier = {
322 .notifier_call = intel_opregion_video_event,
323};
324
325/*
326 * Initialise the DIDL field in opregion. This passes a list of devices to
327 * the firmware. Values are defined by section B.4.2 of the ACPI specification
328 * (version 3)
329 */
330
331static void intel_didl_outputs(struct drm_device *dev)
332{
333 struct drm_i915_private *dev_priv = dev->dev_private;
334 struct intel_opregion *opregion = &dev_priv->opregion;
335 struct drm_connector *connector;
336 acpi_handle handle;
337 struct acpi_device *acpi_dev, *acpi_cdev, *acpi_video_bus = NULL;
338 unsigned long long device_id;
339 acpi_status status;
340 int i = 0;
341
342 handle = DEVICE_ACPI_HANDLE(&dev->pdev->dev);
343 if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &acpi_dev)))
344 return;
345
346 if (acpi_is_video_device(acpi_dev))
347 acpi_video_bus = acpi_dev;
348 else {
349 list_for_each_entry(acpi_cdev, &acpi_dev->children, node) {
350 if (acpi_is_video_device(acpi_cdev)) {
351 acpi_video_bus = acpi_cdev;
352 break;
353 }
354 }
355 }
356
357 if (!acpi_video_bus) {
358 printk(KERN_WARNING "No ACPI video bus found\n");
359 return;
360 }
361
362 list_for_each_entry(acpi_cdev, &acpi_video_bus->children, node) {
363 if (i >= 8) {
364 dev_printk (KERN_ERR, &dev->pdev->dev,
365 "More than 8 outputs detected\n");
366 return;
367 }
368 status =
369 acpi_evaluate_integer(acpi_cdev->handle, "_ADR",
370 NULL, &device_id);
371 if (ACPI_SUCCESS(status)) {
372 if (!device_id)
373 goto blind_set;
374 opregion->acpi->didl[i] = (u32)(device_id & 0x0f0f);
375 i++;
376 }
377 }
378
379end:
380 /* If fewer than 8 outputs, the list must be null terminated */
381 if (i < 8)
382 opregion->acpi->didl[i] = 0;
383 return;
384
385blind_set:
386 i = 0;
387 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
388 int output_type = ACPI_OTHER_OUTPUT;
389 if (i >= 8) {
390 dev_printk (KERN_ERR, &dev->pdev->dev,
391 "More than 8 outputs detected\n");
392 return;
393 }
394 switch (connector->connector_type) {
395 case DRM_MODE_CONNECTOR_VGA:
396 case DRM_MODE_CONNECTOR_DVIA:
397 output_type = ACPI_VGA_OUTPUT;
398 break;
399 case DRM_MODE_CONNECTOR_Composite:
400 case DRM_MODE_CONNECTOR_SVIDEO:
401 case DRM_MODE_CONNECTOR_Component:
402 case DRM_MODE_CONNECTOR_9PinDIN:
403 output_type = ACPI_TV_OUTPUT;
404 break;
405 case DRM_MODE_CONNECTOR_DVII:
406 case DRM_MODE_CONNECTOR_DVID:
407 case DRM_MODE_CONNECTOR_DisplayPort:
408 case DRM_MODE_CONNECTOR_HDMIA:
409 case DRM_MODE_CONNECTOR_HDMIB:
410 output_type = ACPI_DIGITAL_OUTPUT;
411 break;
412 case DRM_MODE_CONNECTOR_LVDS:
413 output_type = ACPI_LVDS_OUTPUT;
414 break;
415 }
416 opregion->acpi->didl[i] |= (1<<31) | output_type | i;
417 i++;
418 }
419 goto end;
420}
421
422void intel_opregion_init(struct drm_device *dev)
423{
424 struct drm_i915_private *dev_priv = dev->dev_private;
425 struct intel_opregion *opregion = &dev_priv->opregion;
426
427 if (!opregion->header)
428 return;
429
430 if (opregion->acpi) {
431 if (drm_core_check_feature(dev, DRIVER_MODESET))
432 intel_didl_outputs(dev);
433
434 /* Notify BIOS we are ready to handle ACPI video ext notifs.
435 * Right now, all the events are handled by the ACPI video module.
436 * We don't actually need to do anything with them. */
437 opregion->acpi->csts = 0;
438 opregion->acpi->drdy = 1;
439
440 system_opregion = opregion;
441 register_acpi_notifier(&intel_opregion_notifier);
442 }
443
444 if (opregion->asle)
445 intel_opregion_enable_asle(dev);
446}
447
448void intel_opregion_fini(struct drm_device *dev)
449{
450 struct drm_i915_private *dev_priv = dev->dev_private;
451 struct intel_opregion *opregion = &dev_priv->opregion;
452
453 if (!opregion->header)
454 return;
455
456 if (opregion->acpi) {
457 opregion->acpi->drdy = 0;
458
459 system_opregion = NULL;
460 unregister_acpi_notifier(&intel_opregion_notifier);
461 }
462
463 /* just clear all opregion memory pointers now */
464 iounmap(opregion->header);
465 opregion->header = NULL;
466 opregion->acpi = NULL;
467 opregion->swsci = NULL;
468 opregion->asle = NULL;
469 opregion->vbt = NULL;
470}
471#endif
472
473int intel_opregion_setup(struct drm_device *dev)
474{
475 struct drm_i915_private *dev_priv = dev->dev_private;
476 struct intel_opregion *opregion = &dev_priv->opregion;
477 void *base;
478 u32 asls, mboxes;
479 int err = 0;
480
481 pci_read_config_dword(dev->pdev, PCI_ASLS, &asls);
482 DRM_DEBUG_DRIVER("graphic opregion physical addr: 0x%x\n", asls);
483 if (asls == 0) {
484 DRM_DEBUG_DRIVER("ACPI OpRegion not supported!\n");
485 return -ENOTSUPP;
486 }
487
488 base = acpi_os_ioremap(asls, OPREGION_SIZE);
489 if (!base)
490 return -ENOMEM;
491
492 if (memcmp(base, OPREGION_SIGNATURE, 16)) {
493 DRM_DEBUG_DRIVER("opregion signature mismatch\n");
494 err = -EINVAL;
495 goto err_out;
496 }
497 opregion->header = base;
498 opregion->vbt = base + OPREGION_VBT_OFFSET;
499
500 opregion->lid_state = base + ACPI_CLID;
501
502 mboxes = opregion->header->mboxes;
503 if (mboxes & MBOX_ACPI) {
504 DRM_DEBUG_DRIVER("Public ACPI methods supported\n");
505 opregion->acpi = base + OPREGION_ACPI_OFFSET;
506 }
507
508 if (mboxes & MBOX_SWSCI) {
509 DRM_DEBUG_DRIVER("SWSCI supported\n");
510 opregion->swsci = base + OPREGION_SWSCI_OFFSET;
511 }
512 if (mboxes & MBOX_ASLE) {
513 DRM_DEBUG_DRIVER("ASLE supported\n");
514 opregion->asle = base + OPREGION_ASLE_OFFSET;
515 }
516
517 return 0;
518
519err_out:
520 iounmap(base);
521 return err;
522}
1/*
2 * Copyright 2008 Intel Corporation <hong.liu@intel.com>
3 * Copyright 2008 Red Hat <mjg@redhat.com>
4 *
5 * Permission is hereby granted, free of charge, to any person obtaining
6 * a copy of this software and associated documentation files (the
7 * "Software"), to deal in the Software without restriction, including
8 * without limitation the rights to use, copy, modify, merge, publish,
9 * distribute, sub license, and/or sell copies of the Software, and to
10 * permit persons to whom the Software is furnished to do so, subject to
11 * the following conditions:
12 *
13 * The above copyright notice and this permission notice (including the
14 * next paragraph) shall be included in all copies or substantial
15 * portions of the Software.
16 *
17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
18 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
19 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
20 * NON-INFRINGEMENT. IN NO EVENT SHALL INTEL AND/OR ITS SUPPLIERS BE
21 * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
22 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
23 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
24 * SOFTWARE.
25 *
26 */
27
28#include <linux/acpi.h>
29#include <linux/dmi.h>
30#include <acpi/video.h>
31
32#include <drm/drmP.h>
33#include <drm/i915_drm.h>
34#include "i915_drv.h"
35#include "intel_drv.h"
36
37#define PCI_ASLE 0xe4
38#define PCI_ASLS 0xfc
39#define PCI_SWSCI 0xe8
40#define PCI_SWSCI_SCISEL (1 << 15)
41#define PCI_SWSCI_GSSCIE (1 << 0)
42
43#define OPREGION_HEADER_OFFSET 0
44#define OPREGION_ACPI_OFFSET 0x100
45#define ACPI_CLID 0x01ac /* current lid state indicator */
46#define ACPI_CDCK 0x01b0 /* current docking state indicator */
47#define OPREGION_SWSCI_OFFSET 0x200
48#define OPREGION_ASLE_OFFSET 0x300
49#define OPREGION_VBT_OFFSET 0x400
50#define OPREGION_ASLE_EXT_OFFSET 0x1C00
51
52#define OPREGION_SIGNATURE "IntelGraphicsMem"
53#define MBOX_ACPI (1<<0)
54#define MBOX_SWSCI (1<<1)
55#define MBOX_ASLE (1<<2)
56#define MBOX_ASLE_EXT (1<<4)
57
58struct opregion_header {
59 u8 signature[16];
60 u32 size;
61 u32 opregion_ver;
62 u8 bios_ver[32];
63 u8 vbios_ver[16];
64 u8 driver_ver[16];
65 u32 mboxes;
66 u32 driver_model;
67 u32 pcon;
68 u8 dver[32];
69 u8 rsvd[124];
70} __packed;
71
72/* OpRegion mailbox #1: public ACPI methods */
73struct opregion_acpi {
74 u32 drdy; /* driver readiness */
75 u32 csts; /* notification status */
76 u32 cevt; /* current event */
77 u8 rsvd1[20];
78 u32 didl[8]; /* supported display devices ID list */
79 u32 cpdl[8]; /* currently presented display list */
80 u32 cadl[8]; /* currently active display list */
81 u32 nadl[8]; /* next active devices list */
82 u32 aslp; /* ASL sleep time-out */
83 u32 tidx; /* toggle table index */
84 u32 chpd; /* current hotplug enable indicator */
85 u32 clid; /* current lid state*/
86 u32 cdck; /* current docking state */
87 u32 sxsw; /* Sx state resume */
88 u32 evts; /* ASL supported events */
89 u32 cnot; /* current OS notification */
90 u32 nrdy; /* driver status */
91 u32 did2[7]; /* extended supported display devices ID list */
92 u32 cpd2[7]; /* extended attached display devices list */
93 u8 rsvd2[4];
94} __packed;
95
96/* OpRegion mailbox #2: SWSCI */
97struct opregion_swsci {
98 u32 scic; /* SWSCI command|status|data */
99 u32 parm; /* command parameters */
100 u32 dslp; /* driver sleep time-out */
101 u8 rsvd[244];
102} __packed;
103
104/* OpRegion mailbox #3: ASLE */
105struct opregion_asle {
106 u32 ardy; /* driver readiness */
107 u32 aslc; /* ASLE interrupt command */
108 u32 tche; /* technology enabled indicator */
109 u32 alsi; /* current ALS illuminance reading */
110 u32 bclp; /* backlight brightness to set */
111 u32 pfit; /* panel fitting state */
112 u32 cblv; /* current brightness level */
113 u16 bclm[20]; /* backlight level duty cycle mapping table */
114 u32 cpfm; /* current panel fitting mode */
115 u32 epfm; /* enabled panel fitting modes */
116 u8 plut[74]; /* panel LUT and identifier */
117 u32 pfmb; /* PWM freq and min brightness */
118 u32 cddv; /* color correction default values */
119 u32 pcft; /* power conservation features */
120 u32 srot; /* supported rotation angles */
121 u32 iuer; /* IUER events */
122 u64 fdss;
123 u32 fdsp;
124 u32 stat;
125 u64 rvda; /* Physical address of raw vbt data */
126 u32 rvds; /* Size of raw vbt data */
127 u8 rsvd[58];
128} __packed;
129
130/* OpRegion mailbox #5: ASLE ext */
131struct opregion_asle_ext {
132 u32 phed; /* Panel Header */
133 u8 bddc[256]; /* Panel EDID */
134 u8 rsvd[764];
135} __packed;
136
137/* Driver readiness indicator */
138#define ASLE_ARDY_READY (1 << 0)
139#define ASLE_ARDY_NOT_READY (0 << 0)
140
141/* ASLE Interrupt Command (ASLC) bits */
142#define ASLC_SET_ALS_ILLUM (1 << 0)
143#define ASLC_SET_BACKLIGHT (1 << 1)
144#define ASLC_SET_PFIT (1 << 2)
145#define ASLC_SET_PWM_FREQ (1 << 3)
146#define ASLC_SUPPORTED_ROTATION_ANGLES (1 << 4)
147#define ASLC_BUTTON_ARRAY (1 << 5)
148#define ASLC_CONVERTIBLE_INDICATOR (1 << 6)
149#define ASLC_DOCKING_INDICATOR (1 << 7)
150#define ASLC_ISCT_STATE_CHANGE (1 << 8)
151#define ASLC_REQ_MSK 0x1ff
152/* response bits */
153#define ASLC_ALS_ILLUM_FAILED (1 << 10)
154#define ASLC_BACKLIGHT_FAILED (1 << 12)
155#define ASLC_PFIT_FAILED (1 << 14)
156#define ASLC_PWM_FREQ_FAILED (1 << 16)
157#define ASLC_ROTATION_ANGLES_FAILED (1 << 18)
158#define ASLC_BUTTON_ARRAY_FAILED (1 << 20)
159#define ASLC_CONVERTIBLE_FAILED (1 << 22)
160#define ASLC_DOCKING_FAILED (1 << 24)
161#define ASLC_ISCT_STATE_FAILED (1 << 26)
162
163/* Technology enabled indicator */
164#define ASLE_TCHE_ALS_EN (1 << 0)
165#define ASLE_TCHE_BLC_EN (1 << 1)
166#define ASLE_TCHE_PFIT_EN (1 << 2)
167#define ASLE_TCHE_PFMB_EN (1 << 3)
168
169/* ASLE backlight brightness to set */
170#define ASLE_BCLP_VALID (1<<31)
171#define ASLE_BCLP_MSK (~(1<<31))
172
173/* ASLE panel fitting request */
174#define ASLE_PFIT_VALID (1<<31)
175#define ASLE_PFIT_CENTER (1<<0)
176#define ASLE_PFIT_STRETCH_TEXT (1<<1)
177#define ASLE_PFIT_STRETCH_GFX (1<<2)
178
179/* PWM frequency and minimum brightness */
180#define ASLE_PFMB_BRIGHTNESS_MASK (0xff)
181#define ASLE_PFMB_BRIGHTNESS_VALID (1<<8)
182#define ASLE_PFMB_PWM_MASK (0x7ffffe00)
183#define ASLE_PFMB_PWM_VALID (1<<31)
184
185#define ASLE_CBLV_VALID (1<<31)
186
187/* IUER */
188#define ASLE_IUER_DOCKING (1 << 7)
189#define ASLE_IUER_CONVERTIBLE (1 << 6)
190#define ASLE_IUER_ROTATION_LOCK_BTN (1 << 4)
191#define ASLE_IUER_VOLUME_DOWN_BTN (1 << 3)
192#define ASLE_IUER_VOLUME_UP_BTN (1 << 2)
193#define ASLE_IUER_WINDOWS_BTN (1 << 1)
194#define ASLE_IUER_POWER_BTN (1 << 0)
195
196/* Software System Control Interrupt (SWSCI) */
197#define SWSCI_SCIC_INDICATOR (1 << 0)
198#define SWSCI_SCIC_MAIN_FUNCTION_SHIFT 1
199#define SWSCI_SCIC_MAIN_FUNCTION_MASK (0xf << 1)
200#define SWSCI_SCIC_SUB_FUNCTION_SHIFT 8
201#define SWSCI_SCIC_SUB_FUNCTION_MASK (0xff << 8)
202#define SWSCI_SCIC_EXIT_PARAMETER_SHIFT 8
203#define SWSCI_SCIC_EXIT_PARAMETER_MASK (0xff << 8)
204#define SWSCI_SCIC_EXIT_STATUS_SHIFT 5
205#define SWSCI_SCIC_EXIT_STATUS_MASK (7 << 5)
206#define SWSCI_SCIC_EXIT_STATUS_SUCCESS 1
207
208#define SWSCI_FUNCTION_CODE(main, sub) \
209 ((main) << SWSCI_SCIC_MAIN_FUNCTION_SHIFT | \
210 (sub) << SWSCI_SCIC_SUB_FUNCTION_SHIFT)
211
212/* SWSCI: Get BIOS Data (GBDA) */
213#define SWSCI_GBDA 4
214#define SWSCI_GBDA_SUPPORTED_CALLS SWSCI_FUNCTION_CODE(SWSCI_GBDA, 0)
215#define SWSCI_GBDA_REQUESTED_CALLBACKS SWSCI_FUNCTION_CODE(SWSCI_GBDA, 1)
216#define SWSCI_GBDA_BOOT_DISPLAY_PREF SWSCI_FUNCTION_CODE(SWSCI_GBDA, 4)
217#define SWSCI_GBDA_PANEL_DETAILS SWSCI_FUNCTION_CODE(SWSCI_GBDA, 5)
218#define SWSCI_GBDA_TV_STANDARD SWSCI_FUNCTION_CODE(SWSCI_GBDA, 6)
219#define SWSCI_GBDA_INTERNAL_GRAPHICS SWSCI_FUNCTION_CODE(SWSCI_GBDA, 7)
220#define SWSCI_GBDA_SPREAD_SPECTRUM SWSCI_FUNCTION_CODE(SWSCI_GBDA, 10)
221
222/* SWSCI: System BIOS Callbacks (SBCB) */
223#define SWSCI_SBCB 6
224#define SWSCI_SBCB_SUPPORTED_CALLBACKS SWSCI_FUNCTION_CODE(SWSCI_SBCB, 0)
225#define SWSCI_SBCB_INIT_COMPLETION SWSCI_FUNCTION_CODE(SWSCI_SBCB, 1)
226#define SWSCI_SBCB_PRE_HIRES_SET_MODE SWSCI_FUNCTION_CODE(SWSCI_SBCB, 3)
227#define SWSCI_SBCB_POST_HIRES_SET_MODE SWSCI_FUNCTION_CODE(SWSCI_SBCB, 4)
228#define SWSCI_SBCB_DISPLAY_SWITCH SWSCI_FUNCTION_CODE(SWSCI_SBCB, 5)
229#define SWSCI_SBCB_SET_TV_FORMAT SWSCI_FUNCTION_CODE(SWSCI_SBCB, 6)
230#define SWSCI_SBCB_ADAPTER_POWER_STATE SWSCI_FUNCTION_CODE(SWSCI_SBCB, 7)
231#define SWSCI_SBCB_DISPLAY_POWER_STATE SWSCI_FUNCTION_CODE(SWSCI_SBCB, 8)
232#define SWSCI_SBCB_SET_BOOT_DISPLAY SWSCI_FUNCTION_CODE(SWSCI_SBCB, 9)
233#define SWSCI_SBCB_SET_PANEL_DETAILS SWSCI_FUNCTION_CODE(SWSCI_SBCB, 10)
234#define SWSCI_SBCB_SET_INTERNAL_GFX SWSCI_FUNCTION_CODE(SWSCI_SBCB, 11)
235#define SWSCI_SBCB_POST_HIRES_TO_DOS_FS SWSCI_FUNCTION_CODE(SWSCI_SBCB, 16)
236#define SWSCI_SBCB_SUSPEND_RESUME SWSCI_FUNCTION_CODE(SWSCI_SBCB, 17)
237#define SWSCI_SBCB_SET_SPREAD_SPECTRUM SWSCI_FUNCTION_CODE(SWSCI_SBCB, 18)
238#define SWSCI_SBCB_POST_VBE_PM SWSCI_FUNCTION_CODE(SWSCI_SBCB, 19)
239#define SWSCI_SBCB_ENABLE_DISABLE_AUDIO SWSCI_FUNCTION_CODE(SWSCI_SBCB, 21)
240
241#define ACPI_OTHER_OUTPUT (0<<8)
242#define ACPI_VGA_OUTPUT (1<<8)
243#define ACPI_TV_OUTPUT (2<<8)
244#define ACPI_DIGITAL_OUTPUT (3<<8)
245#define ACPI_LVDS_OUTPUT (4<<8)
246
247#define MAX_DSLP 1500
248
249#ifdef CONFIG_ACPI
250static int swsci(struct drm_device *dev, u32 function, u32 parm, u32 *parm_out)
251{
252 struct drm_i915_private *dev_priv = dev->dev_private;
253 struct opregion_swsci *swsci = dev_priv->opregion.swsci;
254 u32 main_function, sub_function, scic;
255 u16 pci_swsci;
256 u32 dslp;
257
258 if (!swsci)
259 return -ENODEV;
260
261 main_function = (function & SWSCI_SCIC_MAIN_FUNCTION_MASK) >>
262 SWSCI_SCIC_MAIN_FUNCTION_SHIFT;
263 sub_function = (function & SWSCI_SCIC_SUB_FUNCTION_MASK) >>
264 SWSCI_SCIC_SUB_FUNCTION_SHIFT;
265
266 /* Check if we can call the function. See swsci_setup for details. */
267 if (main_function == SWSCI_SBCB) {
268 if ((dev_priv->opregion.swsci_sbcb_sub_functions &
269 (1 << sub_function)) == 0)
270 return -EINVAL;
271 } else if (main_function == SWSCI_GBDA) {
272 if ((dev_priv->opregion.swsci_gbda_sub_functions &
273 (1 << sub_function)) == 0)
274 return -EINVAL;
275 }
276
277 /* Driver sleep timeout in ms. */
278 dslp = swsci->dslp;
279 if (!dslp) {
280 /* The spec says 2ms should be the default, but it's too small
281 * for some machines. */
282 dslp = 50;
283 } else if (dslp > MAX_DSLP) {
284 /* Hey bios, trust must be earned. */
285 DRM_INFO_ONCE("ACPI BIOS requests an excessive sleep of %u ms, "
286 "using %u ms instead\n", dslp, MAX_DSLP);
287 dslp = MAX_DSLP;
288 }
289
290 /* The spec tells us to do this, but we are the only user... */
291 scic = swsci->scic;
292 if (scic & SWSCI_SCIC_INDICATOR) {
293 DRM_DEBUG_DRIVER("SWSCI request already in progress\n");
294 return -EBUSY;
295 }
296
297 scic = function | SWSCI_SCIC_INDICATOR;
298
299 swsci->parm = parm;
300 swsci->scic = scic;
301
302 /* Ensure SCI event is selected and event trigger is cleared. */
303 pci_read_config_word(dev->pdev, PCI_SWSCI, &pci_swsci);
304 if (!(pci_swsci & PCI_SWSCI_SCISEL) || (pci_swsci & PCI_SWSCI_GSSCIE)) {
305 pci_swsci |= PCI_SWSCI_SCISEL;
306 pci_swsci &= ~PCI_SWSCI_GSSCIE;
307 pci_write_config_word(dev->pdev, PCI_SWSCI, pci_swsci);
308 }
309
310 /* Use event trigger to tell bios to check the mail. */
311 pci_swsci |= PCI_SWSCI_GSSCIE;
312 pci_write_config_word(dev->pdev, PCI_SWSCI, pci_swsci);
313
314 /* Poll for the result. */
315#define C (((scic = swsci->scic) & SWSCI_SCIC_INDICATOR) == 0)
316 if (wait_for(C, dslp)) {
317 DRM_DEBUG_DRIVER("SWSCI request timed out\n");
318 return -ETIMEDOUT;
319 }
320
321 scic = (scic & SWSCI_SCIC_EXIT_STATUS_MASK) >>
322 SWSCI_SCIC_EXIT_STATUS_SHIFT;
323
324 /* Note: scic == 0 is an error! */
325 if (scic != SWSCI_SCIC_EXIT_STATUS_SUCCESS) {
326 DRM_DEBUG_DRIVER("SWSCI request error %u\n", scic);
327 return -EIO;
328 }
329
330 if (parm_out)
331 *parm_out = swsci->parm;
332
333 return 0;
334
335#undef C
336}
337
338#define DISPLAY_TYPE_CRT 0
339#define DISPLAY_TYPE_TV 1
340#define DISPLAY_TYPE_EXTERNAL_FLAT_PANEL 2
341#define DISPLAY_TYPE_INTERNAL_FLAT_PANEL 3
342
343int intel_opregion_notify_encoder(struct intel_encoder *intel_encoder,
344 bool enable)
345{
346 struct drm_device *dev = intel_encoder->base.dev;
347 u32 parm = 0;
348 u32 type = 0;
349 u32 port;
350
351 /* don't care about old stuff for now */
352 if (!HAS_DDI(dev))
353 return 0;
354
355 if (intel_encoder->type == INTEL_OUTPUT_DSI)
356 port = 0;
357 else
358 port = intel_ddi_get_encoder_port(intel_encoder);
359
360 if (port == PORT_E) {
361 port = 0;
362 } else {
363 parm |= 1 << port;
364 port++;
365 }
366
367 if (!enable)
368 parm |= 4 << 8;
369
370 switch (intel_encoder->type) {
371 case INTEL_OUTPUT_ANALOG:
372 type = DISPLAY_TYPE_CRT;
373 break;
374 case INTEL_OUTPUT_UNKNOWN:
375 case INTEL_OUTPUT_DISPLAYPORT:
376 case INTEL_OUTPUT_HDMI:
377 case INTEL_OUTPUT_DP_MST:
378 type = DISPLAY_TYPE_EXTERNAL_FLAT_PANEL;
379 break;
380 case INTEL_OUTPUT_EDP:
381 case INTEL_OUTPUT_DSI:
382 type = DISPLAY_TYPE_INTERNAL_FLAT_PANEL;
383 break;
384 default:
385 WARN_ONCE(1, "unsupported intel_encoder type %d\n",
386 intel_encoder->type);
387 return -EINVAL;
388 }
389
390 parm |= type << (16 + port * 3);
391
392 return swsci(dev, SWSCI_SBCB_DISPLAY_POWER_STATE, parm, NULL);
393}
394
395static const struct {
396 pci_power_t pci_power_state;
397 u32 parm;
398} power_state_map[] = {
399 { PCI_D0, 0x00 },
400 { PCI_D1, 0x01 },
401 { PCI_D2, 0x02 },
402 { PCI_D3hot, 0x04 },
403 { PCI_D3cold, 0x04 },
404};
405
406int intel_opregion_notify_adapter(struct drm_device *dev, pci_power_t state)
407{
408 int i;
409
410 if (!HAS_DDI(dev))
411 return 0;
412
413 for (i = 0; i < ARRAY_SIZE(power_state_map); i++) {
414 if (state == power_state_map[i].pci_power_state)
415 return swsci(dev, SWSCI_SBCB_ADAPTER_POWER_STATE,
416 power_state_map[i].parm, NULL);
417 }
418
419 return -EINVAL;
420}
421
422static u32 asle_set_backlight(struct drm_device *dev, u32 bclp)
423{
424 struct drm_i915_private *dev_priv = dev->dev_private;
425 struct intel_connector *connector;
426 struct opregion_asle *asle = dev_priv->opregion.asle;
427
428 DRM_DEBUG_DRIVER("bclp = 0x%08x\n", bclp);
429
430 if (acpi_video_get_backlight_type() == acpi_backlight_native) {
431 DRM_DEBUG_KMS("opregion backlight request ignored\n");
432 return 0;
433 }
434
435 if (!(bclp & ASLE_BCLP_VALID))
436 return ASLC_BACKLIGHT_FAILED;
437
438 bclp &= ASLE_BCLP_MSK;
439 if (bclp > 255)
440 return ASLC_BACKLIGHT_FAILED;
441
442 drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
443
444 /*
445 * Update backlight on all connectors that support backlight (usually
446 * only one).
447 */
448 DRM_DEBUG_KMS("updating opregion backlight %d/255\n", bclp);
449 for_each_intel_connector(dev, connector)
450 intel_panel_set_backlight_acpi(connector, bclp, 255);
451 asle->cblv = DIV_ROUND_UP(bclp * 100, 255) | ASLE_CBLV_VALID;
452
453 drm_modeset_unlock(&dev->mode_config.connection_mutex);
454
455
456 return 0;
457}
458
459static u32 asle_set_als_illum(struct drm_device *dev, u32 alsi)
460{
461 /* alsi is the current ALS reading in lux. 0 indicates below sensor
462 range, 0xffff indicates above sensor range. 1-0xfffe are valid */
463 DRM_DEBUG_DRIVER("Illum is not supported\n");
464 return ASLC_ALS_ILLUM_FAILED;
465}
466
467static u32 asle_set_pwm_freq(struct drm_device *dev, u32 pfmb)
468{
469 DRM_DEBUG_DRIVER("PWM freq is not supported\n");
470 return ASLC_PWM_FREQ_FAILED;
471}
472
473static u32 asle_set_pfit(struct drm_device *dev, u32 pfit)
474{
475 /* Panel fitting is currently controlled by the X code, so this is a
476 noop until modesetting support works fully */
477 DRM_DEBUG_DRIVER("Pfit is not supported\n");
478 return ASLC_PFIT_FAILED;
479}
480
481static u32 asle_set_supported_rotation_angles(struct drm_device *dev, u32 srot)
482{
483 DRM_DEBUG_DRIVER("SROT is not supported\n");
484 return ASLC_ROTATION_ANGLES_FAILED;
485}
486
487static u32 asle_set_button_array(struct drm_device *dev, u32 iuer)
488{
489 if (!iuer)
490 DRM_DEBUG_DRIVER("Button array event is not supported (nothing)\n");
491 if (iuer & ASLE_IUER_ROTATION_LOCK_BTN)
492 DRM_DEBUG_DRIVER("Button array event is not supported (rotation lock)\n");
493 if (iuer & ASLE_IUER_VOLUME_DOWN_BTN)
494 DRM_DEBUG_DRIVER("Button array event is not supported (volume down)\n");
495 if (iuer & ASLE_IUER_VOLUME_UP_BTN)
496 DRM_DEBUG_DRIVER("Button array event is not supported (volume up)\n");
497 if (iuer & ASLE_IUER_WINDOWS_BTN)
498 DRM_DEBUG_DRIVER("Button array event is not supported (windows)\n");
499 if (iuer & ASLE_IUER_POWER_BTN)
500 DRM_DEBUG_DRIVER("Button array event is not supported (power)\n");
501
502 return ASLC_BUTTON_ARRAY_FAILED;
503}
504
505static u32 asle_set_convertible(struct drm_device *dev, u32 iuer)
506{
507 if (iuer & ASLE_IUER_CONVERTIBLE)
508 DRM_DEBUG_DRIVER("Convertible is not supported (clamshell)\n");
509 else
510 DRM_DEBUG_DRIVER("Convertible is not supported (slate)\n");
511
512 return ASLC_CONVERTIBLE_FAILED;
513}
514
515static u32 asle_set_docking(struct drm_device *dev, u32 iuer)
516{
517 if (iuer & ASLE_IUER_DOCKING)
518 DRM_DEBUG_DRIVER("Docking is not supported (docked)\n");
519 else
520 DRM_DEBUG_DRIVER("Docking is not supported (undocked)\n");
521
522 return ASLC_DOCKING_FAILED;
523}
524
525static u32 asle_isct_state(struct drm_device *dev)
526{
527 DRM_DEBUG_DRIVER("ISCT is not supported\n");
528 return ASLC_ISCT_STATE_FAILED;
529}
530
531static void asle_work(struct work_struct *work)
532{
533 struct intel_opregion *opregion =
534 container_of(work, struct intel_opregion, asle_work);
535 struct drm_i915_private *dev_priv =
536 container_of(opregion, struct drm_i915_private, opregion);
537 struct drm_device *dev = dev_priv->dev;
538 struct opregion_asle *asle = dev_priv->opregion.asle;
539 u32 aslc_stat = 0;
540 u32 aslc_req;
541
542 if (!asle)
543 return;
544
545 aslc_req = asle->aslc;
546
547 if (!(aslc_req & ASLC_REQ_MSK)) {
548 DRM_DEBUG_DRIVER("No request on ASLC interrupt 0x%08x\n",
549 aslc_req);
550 return;
551 }
552
553 if (aslc_req & ASLC_SET_ALS_ILLUM)
554 aslc_stat |= asle_set_als_illum(dev, asle->alsi);
555
556 if (aslc_req & ASLC_SET_BACKLIGHT)
557 aslc_stat |= asle_set_backlight(dev, asle->bclp);
558
559 if (aslc_req & ASLC_SET_PFIT)
560 aslc_stat |= asle_set_pfit(dev, asle->pfit);
561
562 if (aslc_req & ASLC_SET_PWM_FREQ)
563 aslc_stat |= asle_set_pwm_freq(dev, asle->pfmb);
564
565 if (aslc_req & ASLC_SUPPORTED_ROTATION_ANGLES)
566 aslc_stat |= asle_set_supported_rotation_angles(dev,
567 asle->srot);
568
569 if (aslc_req & ASLC_BUTTON_ARRAY)
570 aslc_stat |= asle_set_button_array(dev, asle->iuer);
571
572 if (aslc_req & ASLC_CONVERTIBLE_INDICATOR)
573 aslc_stat |= asle_set_convertible(dev, asle->iuer);
574
575 if (aslc_req & ASLC_DOCKING_INDICATOR)
576 aslc_stat |= asle_set_docking(dev, asle->iuer);
577
578 if (aslc_req & ASLC_ISCT_STATE_CHANGE)
579 aslc_stat |= asle_isct_state(dev);
580
581 asle->aslc = aslc_stat;
582}
583
584void intel_opregion_asle_intr(struct drm_device *dev)
585{
586 struct drm_i915_private *dev_priv = dev->dev_private;
587
588 if (dev_priv->opregion.asle)
589 schedule_work(&dev_priv->opregion.asle_work);
590}
591
592#define ACPI_EV_DISPLAY_SWITCH (1<<0)
593#define ACPI_EV_LID (1<<1)
594#define ACPI_EV_DOCK (1<<2)
595
596static struct intel_opregion *system_opregion;
597
598static int intel_opregion_video_event(struct notifier_block *nb,
599 unsigned long val, void *data)
600{
601 /* The only video events relevant to opregion are 0x80. These indicate
602 either a docking event, lid switch or display switch request. In
603 Linux, these are handled by the dock, button and video drivers.
604 */
605
606 struct acpi_bus_event *event = data;
607 struct opregion_acpi *acpi;
608 int ret = NOTIFY_OK;
609
610 if (strcmp(event->device_class, ACPI_VIDEO_CLASS) != 0)
611 return NOTIFY_DONE;
612
613 if (!system_opregion)
614 return NOTIFY_DONE;
615
616 acpi = system_opregion->acpi;
617
618 if (event->type == 0x80 && ((acpi->cevt & 1) == 0))
619 ret = NOTIFY_BAD;
620
621 acpi->csts = 0;
622
623 return ret;
624}
625
626static struct notifier_block intel_opregion_notifier = {
627 .notifier_call = intel_opregion_video_event,
628};
629
630/*
631 * Initialise the DIDL field in opregion. This passes a list of devices to
632 * the firmware. Values are defined by section B.4.2 of the ACPI specification
633 * (version 3)
634 */
635
636static u32 get_did(struct intel_opregion *opregion, int i)
637{
638 u32 did;
639
640 if (i < ARRAY_SIZE(opregion->acpi->didl)) {
641 did = opregion->acpi->didl[i];
642 } else {
643 i -= ARRAY_SIZE(opregion->acpi->didl);
644
645 if (WARN_ON(i >= ARRAY_SIZE(opregion->acpi->did2)))
646 return 0;
647
648 did = opregion->acpi->did2[i];
649 }
650
651 return did;
652}
653
654static void set_did(struct intel_opregion *opregion, int i, u32 val)
655{
656 if (i < ARRAY_SIZE(opregion->acpi->didl)) {
657 opregion->acpi->didl[i] = val;
658 } else {
659 i -= ARRAY_SIZE(opregion->acpi->didl);
660
661 if (WARN_ON(i >= ARRAY_SIZE(opregion->acpi->did2)))
662 return;
663
664 opregion->acpi->did2[i] = val;
665 }
666}
667
668static void intel_didl_outputs(struct drm_device *dev)
669{
670 struct drm_i915_private *dev_priv = dev->dev_private;
671 struct intel_opregion *opregion = &dev_priv->opregion;
672 struct drm_connector *connector;
673 acpi_handle handle;
674 struct acpi_device *acpi_dev, *acpi_cdev, *acpi_video_bus = NULL;
675 unsigned long long device_id;
676 acpi_status status;
677 u32 temp, max_outputs;
678 int i = 0;
679
680 handle = ACPI_HANDLE(&dev->pdev->dev);
681 if (!handle || acpi_bus_get_device(handle, &acpi_dev))
682 return;
683
684 if (acpi_is_video_device(handle))
685 acpi_video_bus = acpi_dev;
686 else {
687 list_for_each_entry(acpi_cdev, &acpi_dev->children, node) {
688 if (acpi_is_video_device(acpi_cdev->handle)) {
689 acpi_video_bus = acpi_cdev;
690 break;
691 }
692 }
693 }
694
695 if (!acpi_video_bus) {
696 DRM_DEBUG_KMS("No ACPI video bus found\n");
697 return;
698 }
699
700 /*
701 * In theory, did2, the extended didl, gets added at opregion version
702 * 3.0. In practice, however, we're supposed to set it for earlier
703 * versions as well, since a BIOS that doesn't understand did2 should
704 * not look at it anyway. Use a variable so we can tweak this if a need
705 * arises later.
706 */
707 max_outputs = ARRAY_SIZE(opregion->acpi->didl) +
708 ARRAY_SIZE(opregion->acpi->did2);
709
710 list_for_each_entry(acpi_cdev, &acpi_video_bus->children, node) {
711 if (i >= max_outputs) {
712 DRM_DEBUG_KMS("More than %u outputs detected via ACPI\n",
713 max_outputs);
714 return;
715 }
716 status = acpi_evaluate_integer(acpi_cdev->handle, "_ADR",
717 NULL, &device_id);
718 if (ACPI_SUCCESS(status)) {
719 if (!device_id)
720 goto blind_set;
721 set_did(opregion, i++, (u32)(device_id & 0x0f0f));
722 }
723 }
724
725end:
726 DRM_DEBUG_KMS("%d outputs detected\n", i);
727
728 /* If fewer than max outputs, the list must be null terminated */
729 if (i < max_outputs)
730 set_did(opregion, i, 0);
731 return;
732
733blind_set:
734 i = 0;
735 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
736 int output_type = ACPI_OTHER_OUTPUT;
737 if (i >= max_outputs) {
738 DRM_DEBUG_KMS("More than %u outputs in connector list\n",
739 max_outputs);
740 return;
741 }
742 switch (connector->connector_type) {
743 case DRM_MODE_CONNECTOR_VGA:
744 case DRM_MODE_CONNECTOR_DVIA:
745 output_type = ACPI_VGA_OUTPUT;
746 break;
747 case DRM_MODE_CONNECTOR_Composite:
748 case DRM_MODE_CONNECTOR_SVIDEO:
749 case DRM_MODE_CONNECTOR_Component:
750 case DRM_MODE_CONNECTOR_9PinDIN:
751 output_type = ACPI_TV_OUTPUT;
752 break;
753 case DRM_MODE_CONNECTOR_DVII:
754 case DRM_MODE_CONNECTOR_DVID:
755 case DRM_MODE_CONNECTOR_DisplayPort:
756 case DRM_MODE_CONNECTOR_HDMIA:
757 case DRM_MODE_CONNECTOR_HDMIB:
758 output_type = ACPI_DIGITAL_OUTPUT;
759 break;
760 case DRM_MODE_CONNECTOR_LVDS:
761 output_type = ACPI_LVDS_OUTPUT;
762 break;
763 }
764 temp = get_did(opregion, i);
765 set_did(opregion, i, temp | (1 << 31) | output_type | i);
766 i++;
767 }
768 goto end;
769}
770
771static void intel_setup_cadls(struct drm_device *dev)
772{
773 struct drm_i915_private *dev_priv = dev->dev_private;
774 struct intel_opregion *opregion = &dev_priv->opregion;
775 int i = 0;
776 u32 disp_id;
777
778 /* Initialize the CADL field by duplicating the DIDL values.
779 * Technically, this is not always correct as display outputs may exist,
780 * but not active. This initialization is necessary for some Clevo
781 * laptops that check this field before processing the brightness and
782 * display switching hotkeys. Just like DIDL, CADL is NULL-terminated if
783 * there are less than eight devices. */
784 do {
785 disp_id = get_did(opregion, i);
786 opregion->acpi->cadl[i] = disp_id;
787 } while (++i < 8 && disp_id != 0);
788}
789
790void intel_opregion_init(struct drm_device *dev)
791{
792 struct drm_i915_private *dev_priv = dev->dev_private;
793 struct intel_opregion *opregion = &dev_priv->opregion;
794
795 if (!opregion->header)
796 return;
797
798 if (opregion->acpi) {
799 intel_didl_outputs(dev);
800 intel_setup_cadls(dev);
801
802 /* Notify BIOS we are ready to handle ACPI video ext notifs.
803 * Right now, all the events are handled by the ACPI video module.
804 * We don't actually need to do anything with them. */
805 opregion->acpi->csts = 0;
806 opregion->acpi->drdy = 1;
807
808 system_opregion = opregion;
809 register_acpi_notifier(&intel_opregion_notifier);
810 }
811
812 if (opregion->asle) {
813 opregion->asle->tche = ASLE_TCHE_BLC_EN;
814 opregion->asle->ardy = ASLE_ARDY_READY;
815 }
816}
817
818void intel_opregion_fini(struct drm_device *dev)
819{
820 struct drm_i915_private *dev_priv = dev->dev_private;
821 struct intel_opregion *opregion = &dev_priv->opregion;
822
823 if (!opregion->header)
824 return;
825
826 if (opregion->asle)
827 opregion->asle->ardy = ASLE_ARDY_NOT_READY;
828
829 cancel_work_sync(&dev_priv->opregion.asle_work);
830
831 if (opregion->acpi) {
832 opregion->acpi->drdy = 0;
833
834 system_opregion = NULL;
835 unregister_acpi_notifier(&intel_opregion_notifier);
836 }
837
838 /* just clear all opregion memory pointers now */
839 memunmap(opregion->header);
840 if (opregion->rvda) {
841 memunmap(opregion->rvda);
842 opregion->rvda = NULL;
843 }
844 opregion->header = NULL;
845 opregion->acpi = NULL;
846 opregion->swsci = NULL;
847 opregion->asle = NULL;
848 opregion->vbt = NULL;
849 opregion->lid_state = NULL;
850}
851
852static void swsci_setup(struct drm_device *dev)
853{
854 struct drm_i915_private *dev_priv = dev->dev_private;
855 struct intel_opregion *opregion = &dev_priv->opregion;
856 bool requested_callbacks = false;
857 u32 tmp;
858
859 /* Sub-function code 0 is okay, let's allow them. */
860 opregion->swsci_gbda_sub_functions = 1;
861 opregion->swsci_sbcb_sub_functions = 1;
862
863 /* We use GBDA to ask for supported GBDA calls. */
864 if (swsci(dev, SWSCI_GBDA_SUPPORTED_CALLS, 0, &tmp) == 0) {
865 /* make the bits match the sub-function codes */
866 tmp <<= 1;
867 opregion->swsci_gbda_sub_functions |= tmp;
868 }
869
870 /*
871 * We also use GBDA to ask for _requested_ SBCB callbacks. The driver
872 * must not call interfaces that are not specifically requested by the
873 * bios.
874 */
875 if (swsci(dev, SWSCI_GBDA_REQUESTED_CALLBACKS, 0, &tmp) == 0) {
876 /* here, the bits already match sub-function codes */
877 opregion->swsci_sbcb_sub_functions |= tmp;
878 requested_callbacks = true;
879 }
880
881 /*
882 * But we use SBCB to ask for _supported_ SBCB calls. This does not mean
883 * the callback is _requested_. But we still can't call interfaces that
884 * are not requested.
885 */
886 if (swsci(dev, SWSCI_SBCB_SUPPORTED_CALLBACKS, 0, &tmp) == 0) {
887 /* make the bits match the sub-function codes */
888 u32 low = tmp & 0x7ff;
889 u32 high = tmp & ~0xfff; /* bit 11 is reserved */
890 tmp = (high << 4) | (low << 1) | 1;
891
892 /* best guess what to do with supported wrt requested */
893 if (requested_callbacks) {
894 u32 req = opregion->swsci_sbcb_sub_functions;
895 if ((req & tmp) != req)
896 DRM_DEBUG_DRIVER("SWSCI BIOS requested (%08x) SBCB callbacks that are not supported (%08x)\n", req, tmp);
897 /* XXX: for now, trust the requested callbacks */
898 /* opregion->swsci_sbcb_sub_functions &= tmp; */
899 } else {
900 opregion->swsci_sbcb_sub_functions |= tmp;
901 }
902 }
903
904 DRM_DEBUG_DRIVER("SWSCI GBDA callbacks %08x, SBCB callbacks %08x\n",
905 opregion->swsci_gbda_sub_functions,
906 opregion->swsci_sbcb_sub_functions);
907}
908#else /* CONFIG_ACPI */
909static inline void swsci_setup(struct drm_device *dev) {}
910#endif /* CONFIG_ACPI */
911
912static int intel_no_opregion_vbt_callback(const struct dmi_system_id *id)
913{
914 DRM_DEBUG_KMS("Falling back to manually reading VBT from "
915 "VBIOS ROM for %s\n", id->ident);
916 return 1;
917}
918
919static const struct dmi_system_id intel_no_opregion_vbt[] = {
920 {
921 .callback = intel_no_opregion_vbt_callback,
922 .ident = "ThinkCentre A57",
923 .matches = {
924 DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
925 DMI_MATCH(DMI_PRODUCT_NAME, "97027RG"),
926 },
927 },
928 { }
929};
930
931int intel_opregion_setup(struct drm_device *dev)
932{
933 struct drm_i915_private *dev_priv = dev->dev_private;
934 struct intel_opregion *opregion = &dev_priv->opregion;
935 u32 asls, mboxes;
936 char buf[sizeof(OPREGION_SIGNATURE)];
937 int err = 0;
938 void *base;
939
940 BUILD_BUG_ON(sizeof(struct opregion_header) != 0x100);
941 BUILD_BUG_ON(sizeof(struct opregion_acpi) != 0x100);
942 BUILD_BUG_ON(sizeof(struct opregion_swsci) != 0x100);
943 BUILD_BUG_ON(sizeof(struct opregion_asle) != 0x100);
944 BUILD_BUG_ON(sizeof(struct opregion_asle_ext) != 0x400);
945
946 pci_read_config_dword(dev->pdev, PCI_ASLS, &asls);
947 DRM_DEBUG_DRIVER("graphic opregion physical addr: 0x%x\n", asls);
948 if (asls == 0) {
949 DRM_DEBUG_DRIVER("ACPI OpRegion not supported!\n");
950 return -ENOTSUPP;
951 }
952
953#ifdef CONFIG_ACPI
954 INIT_WORK(&opregion->asle_work, asle_work);
955#endif
956
957 base = memremap(asls, OPREGION_SIZE, MEMREMAP_WB);
958 if (!base)
959 return -ENOMEM;
960
961 memcpy(buf, base, sizeof(buf));
962
963 if (memcmp(buf, OPREGION_SIGNATURE, 16)) {
964 DRM_DEBUG_DRIVER("opregion signature mismatch\n");
965 err = -EINVAL;
966 goto err_out;
967 }
968 opregion->header = base;
969 opregion->lid_state = base + ACPI_CLID;
970
971 mboxes = opregion->header->mboxes;
972 if (mboxes & MBOX_ACPI) {
973 DRM_DEBUG_DRIVER("Public ACPI methods supported\n");
974 opregion->acpi = base + OPREGION_ACPI_OFFSET;
975 }
976
977 if (mboxes & MBOX_SWSCI) {
978 DRM_DEBUG_DRIVER("SWSCI supported\n");
979 opregion->swsci = base + OPREGION_SWSCI_OFFSET;
980 swsci_setup(dev);
981 }
982
983 if (mboxes & MBOX_ASLE) {
984 DRM_DEBUG_DRIVER("ASLE supported\n");
985 opregion->asle = base + OPREGION_ASLE_OFFSET;
986
987 opregion->asle->ardy = ASLE_ARDY_NOT_READY;
988 }
989
990 if (mboxes & MBOX_ASLE_EXT)
991 DRM_DEBUG_DRIVER("ASLE extension supported\n");
992
993 if (!dmi_check_system(intel_no_opregion_vbt)) {
994 const void *vbt = NULL;
995 u32 vbt_size = 0;
996
997 if (opregion->header->opregion_ver >= 2 && opregion->asle &&
998 opregion->asle->rvda && opregion->asle->rvds) {
999 opregion->rvda = memremap(opregion->asle->rvda,
1000 opregion->asle->rvds,
1001 MEMREMAP_WB);
1002 vbt = opregion->rvda;
1003 vbt_size = opregion->asle->rvds;
1004 }
1005
1006 if (intel_bios_is_valid_vbt(vbt, vbt_size)) {
1007 DRM_DEBUG_KMS("Found valid VBT in ACPI OpRegion (RVDA)\n");
1008 opregion->vbt = vbt;
1009 opregion->vbt_size = vbt_size;
1010 } else {
1011 vbt = base + OPREGION_VBT_OFFSET;
1012 vbt_size = OPREGION_ASLE_EXT_OFFSET - OPREGION_VBT_OFFSET;
1013 if (intel_bios_is_valid_vbt(vbt, vbt_size)) {
1014 DRM_DEBUG_KMS("Found valid VBT in ACPI OpRegion (Mailbox #4)\n");
1015 opregion->vbt = vbt;
1016 opregion->vbt_size = vbt_size;
1017 }
1018 }
1019 }
1020
1021 return 0;
1022
1023err_out:
1024 memunmap(base);
1025 return err;
1026}