Loading...
1/*
2 * Low-Level PCI Support for PC
3 *
4 * (c) 1999--2000 Martin Mares <mj@ucw.cz>
5 */
6
7#include <linux/sched.h>
8#include <linux/pci.h>
9#include <linux/ioport.h>
10#include <linux/init.h>
11#include <linux/dmi.h>
12#include <linux/slab.h>
13
14#include <asm/acpi.h>
15#include <asm/segment.h>
16#include <asm/io.h>
17#include <asm/smp.h>
18#include <asm/pci_x86.h>
19
20unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 |
21 PCI_PROBE_MMCONF;
22
23unsigned int pci_early_dump_regs;
24static int pci_bf_sort;
25static int smbios_type_b1_flag;
26int pci_routeirq;
27int noioapicquirk;
28#ifdef CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS
29int noioapicreroute = 0;
30#else
31int noioapicreroute = 1;
32#endif
33int pcibios_last_bus = -1;
34unsigned long pirq_table_addr;
35struct pci_bus *pci_root_bus;
36struct pci_raw_ops *raw_pci_ops;
37struct pci_raw_ops *raw_pci_ext_ops;
38
39int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn,
40 int reg, int len, u32 *val)
41{
42 if (domain == 0 && reg < 256 && raw_pci_ops)
43 return raw_pci_ops->read(domain, bus, devfn, reg, len, val);
44 if (raw_pci_ext_ops)
45 return raw_pci_ext_ops->read(domain, bus, devfn, reg, len, val);
46 return -EINVAL;
47}
48
49int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn,
50 int reg, int len, u32 val)
51{
52 if (domain == 0 && reg < 256 && raw_pci_ops)
53 return raw_pci_ops->write(domain, bus, devfn, reg, len, val);
54 if (raw_pci_ext_ops)
55 return raw_pci_ext_ops->write(domain, bus, devfn, reg, len, val);
56 return -EINVAL;
57}
58
59static int pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
60{
61 return raw_pci_read(pci_domain_nr(bus), bus->number,
62 devfn, where, size, value);
63}
64
65static int pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
66{
67 return raw_pci_write(pci_domain_nr(bus), bus->number,
68 devfn, where, size, value);
69}
70
71struct pci_ops pci_root_ops = {
72 .read = pci_read,
73 .write = pci_write,
74};
75
76/*
77 * This interrupt-safe spinlock protects all accesses to PCI
78 * configuration space.
79 */
80DEFINE_RAW_SPINLOCK(pci_config_lock);
81
82static int __devinit can_skip_ioresource_align(const struct dmi_system_id *d)
83{
84 pci_probe |= PCI_CAN_SKIP_ISA_ALIGN;
85 printk(KERN_INFO "PCI: %s detected, can skip ISA alignment\n", d->ident);
86 return 0;
87}
88
89static const struct dmi_system_id can_skip_pciprobe_dmi_table[] __devinitconst = {
90/*
91 * Systems where PCI IO resource ISA alignment can be skipped
92 * when the ISA enable bit in the bridge control is not set
93 */
94 {
95 .callback = can_skip_ioresource_align,
96 .ident = "IBM System x3800",
97 .matches = {
98 DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
99 DMI_MATCH(DMI_PRODUCT_NAME, "x3800"),
100 },
101 },
102 {
103 .callback = can_skip_ioresource_align,
104 .ident = "IBM System x3850",
105 .matches = {
106 DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
107 DMI_MATCH(DMI_PRODUCT_NAME, "x3850"),
108 },
109 },
110 {
111 .callback = can_skip_ioresource_align,
112 .ident = "IBM System x3950",
113 .matches = {
114 DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
115 DMI_MATCH(DMI_PRODUCT_NAME, "x3950"),
116 },
117 },
118 {}
119};
120
121void __init dmi_check_skip_isa_align(void)
122{
123 dmi_check_system(can_skip_pciprobe_dmi_table);
124}
125
126static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev)
127{
128 struct resource *rom_r = &dev->resource[PCI_ROM_RESOURCE];
129 struct resource *bar_r;
130 int bar;
131
132 if (pci_probe & PCI_NOASSIGN_BARS) {
133 /*
134 * If the BIOS did not assign the BAR, zero out the
135 * resource so the kernel doesn't attmept to assign
136 * it later on in pci_assign_unassigned_resources
137 */
138 for (bar = 0; bar <= PCI_STD_RESOURCE_END; bar++) {
139 bar_r = &dev->resource[bar];
140 if (bar_r->start == 0 && bar_r->end != 0) {
141 bar_r->flags = 0;
142 bar_r->end = 0;
143 }
144 }
145 }
146
147 if (pci_probe & PCI_NOASSIGN_ROMS) {
148 if (rom_r->parent)
149 return;
150 if (rom_r->start) {
151 /* we deal with BIOS assigned ROM later */
152 return;
153 }
154 rom_r->start = rom_r->end = rom_r->flags = 0;
155 }
156}
157
158/*
159 * Called after each bus is probed, but before its children
160 * are examined.
161 */
162
163void __devinit pcibios_fixup_bus(struct pci_bus *b)
164{
165 struct pci_dev *dev;
166
167 /* root bus? */
168 if (!b->parent)
169 x86_pci_root_bus_res_quirks(b);
170 pci_read_bridge_bases(b);
171 list_for_each_entry(dev, &b->devices, bus_list)
172 pcibios_fixup_device_resources(dev);
173}
174
175/*
176 * Only use DMI information to set this if nothing was passed
177 * on the kernel command line (which was parsed earlier).
178 */
179
180static int __devinit set_bf_sort(const struct dmi_system_id *d)
181{
182 if (pci_bf_sort == pci_bf_sort_default) {
183 pci_bf_sort = pci_dmi_bf;
184 printk(KERN_INFO "PCI: %s detected, enabling pci=bfsort.\n", d->ident);
185 }
186 return 0;
187}
188
189static void __devinit read_dmi_type_b1(const struct dmi_header *dm,
190 void *private_data)
191{
192 u8 *d = (u8 *)dm + 4;
193
194 if (dm->type != 0xB1)
195 return;
196 switch (((*(u32 *)d) >> 9) & 0x03) {
197 case 0x00:
198 printk(KERN_INFO "dmi type 0xB1 record - unknown flag\n");
199 break;
200 case 0x01: /* set pci=bfsort */
201 smbios_type_b1_flag = 1;
202 break;
203 case 0x02: /* do not set pci=bfsort */
204 smbios_type_b1_flag = 2;
205 break;
206 default:
207 break;
208 }
209}
210
211static int __devinit find_sort_method(const struct dmi_system_id *d)
212{
213 dmi_walk(read_dmi_type_b1, NULL);
214
215 if (smbios_type_b1_flag == 1) {
216 set_bf_sort(d);
217 return 0;
218 }
219 return -1;
220}
221
222/*
223 * Enable renumbering of PCI bus# ranges to reach all PCI busses (Cardbus)
224 */
225#ifdef __i386__
226static int __devinit assign_all_busses(const struct dmi_system_id *d)
227{
228 pci_probe |= PCI_ASSIGN_ALL_BUSSES;
229 printk(KERN_INFO "%s detected: enabling PCI bus# renumbering"
230 " (pci=assign-busses)\n", d->ident);
231 return 0;
232}
233#endif
234
235static const struct dmi_system_id __devinitconst pciprobe_dmi_table[] = {
236#ifdef __i386__
237/*
238 * Laptops which need pci=assign-busses to see Cardbus cards
239 */
240 {
241 .callback = assign_all_busses,
242 .ident = "Samsung X20 Laptop",
243 .matches = {
244 DMI_MATCH(DMI_SYS_VENDOR, "Samsung Electronics"),
245 DMI_MATCH(DMI_PRODUCT_NAME, "SX20S"),
246 },
247 },
248#endif /* __i386__ */
249 {
250 .callback = set_bf_sort,
251 .ident = "Dell PowerEdge 1950",
252 .matches = {
253 DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
254 DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1950"),
255 },
256 },
257 {
258 .callback = set_bf_sort,
259 .ident = "Dell PowerEdge 1955",
260 .matches = {
261 DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
262 DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1955"),
263 },
264 },
265 {
266 .callback = set_bf_sort,
267 .ident = "Dell PowerEdge 2900",
268 .matches = {
269 DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
270 DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2900"),
271 },
272 },
273 {
274 .callback = set_bf_sort,
275 .ident = "Dell PowerEdge 2950",
276 .matches = {
277 DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
278 DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2950"),
279 },
280 },
281 {
282 .callback = set_bf_sort,
283 .ident = "Dell PowerEdge R900",
284 .matches = {
285 DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
286 DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge R900"),
287 },
288 },
289 {
290 .callback = find_sort_method,
291 .ident = "Dell System",
292 .matches = {
293 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"),
294 },
295 },
296 {
297 .callback = set_bf_sort,
298 .ident = "HP ProLiant BL20p G3",
299 .matches = {
300 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
301 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G3"),
302 },
303 },
304 {
305 .callback = set_bf_sort,
306 .ident = "HP ProLiant BL20p G4",
307 .matches = {
308 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
309 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G4"),
310 },
311 },
312 {
313 .callback = set_bf_sort,
314 .ident = "HP ProLiant BL30p G1",
315 .matches = {
316 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
317 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL30p G1"),
318 },
319 },
320 {
321 .callback = set_bf_sort,
322 .ident = "HP ProLiant BL25p G1",
323 .matches = {
324 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
325 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL25p G1"),
326 },
327 },
328 {
329 .callback = set_bf_sort,
330 .ident = "HP ProLiant BL35p G1",
331 .matches = {
332 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
333 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL35p G1"),
334 },
335 },
336 {
337 .callback = set_bf_sort,
338 .ident = "HP ProLiant BL45p G1",
339 .matches = {
340 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
341 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G1"),
342 },
343 },
344 {
345 .callback = set_bf_sort,
346 .ident = "HP ProLiant BL45p G2",
347 .matches = {
348 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
349 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G2"),
350 },
351 },
352 {
353 .callback = set_bf_sort,
354 .ident = "HP ProLiant BL460c G1",
355 .matches = {
356 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
357 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL460c G1"),
358 },
359 },
360 {
361 .callback = set_bf_sort,
362 .ident = "HP ProLiant BL465c G1",
363 .matches = {
364 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
365 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL465c G1"),
366 },
367 },
368 {
369 .callback = set_bf_sort,
370 .ident = "HP ProLiant BL480c G1",
371 .matches = {
372 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
373 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL480c G1"),
374 },
375 },
376 {
377 .callback = set_bf_sort,
378 .ident = "HP ProLiant BL685c G1",
379 .matches = {
380 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
381 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL685c G1"),
382 },
383 },
384 {
385 .callback = set_bf_sort,
386 .ident = "HP ProLiant DL360",
387 .matches = {
388 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
389 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL360"),
390 },
391 },
392 {
393 .callback = set_bf_sort,
394 .ident = "HP ProLiant DL380",
395 .matches = {
396 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
397 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL380"),
398 },
399 },
400#ifdef __i386__
401 {
402 .callback = assign_all_busses,
403 .ident = "Compaq EVO N800c",
404 .matches = {
405 DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
406 DMI_MATCH(DMI_PRODUCT_NAME, "EVO N800c"),
407 },
408 },
409#endif
410 {
411 .callback = set_bf_sort,
412 .ident = "HP ProLiant DL385 G2",
413 .matches = {
414 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
415 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL385 G2"),
416 },
417 },
418 {
419 .callback = set_bf_sort,
420 .ident = "HP ProLiant DL585 G2",
421 .matches = {
422 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
423 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL585 G2"),
424 },
425 },
426 {}
427};
428
429void __init dmi_check_pciprobe(void)
430{
431 dmi_check_system(pciprobe_dmi_table);
432}
433
434struct pci_bus * __devinit pcibios_scan_root(int busnum)
435{
436 struct pci_bus *bus = NULL;
437 struct pci_sysdata *sd;
438
439 while ((bus = pci_find_next_bus(bus)) != NULL) {
440 if (bus->number == busnum) {
441 /* Already scanned */
442 return bus;
443 }
444 }
445
446 /* Allocate per-root-bus (not per bus) arch-specific data.
447 * TODO: leak; this memory is never freed.
448 * It's arguable whether it's worth the trouble to care.
449 */
450 sd = kzalloc(sizeof(*sd), GFP_KERNEL);
451 if (!sd) {
452 printk(KERN_ERR "PCI: OOM, not probing PCI bus %02x\n", busnum);
453 return NULL;
454 }
455
456 sd->node = get_mp_bus_to_node(busnum);
457
458 printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busnum);
459 bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd);
460 if (!bus)
461 kfree(sd);
462
463 return bus;
464}
465void __init pcibios_set_cache_line_size(void)
466{
467 struct cpuinfo_x86 *c = &boot_cpu_data;
468
469 /*
470 * Set PCI cacheline size to that of the CPU if the CPU has reported it.
471 * (For older CPUs that don't support cpuid, we se it to 32 bytes
472 * It's also good for 386/486s (which actually have 16)
473 * as quite a few PCI devices do not support smaller values.
474 */
475 if (c->x86_clflush_size > 0) {
476 pci_dfl_cache_line_size = c->x86_clflush_size >> 2;
477 printk(KERN_DEBUG "PCI: pci_cache_line_size set to %d bytes\n",
478 pci_dfl_cache_line_size << 2);
479 } else {
480 pci_dfl_cache_line_size = 32 >> 2;
481 printk(KERN_DEBUG "PCI: Unknown cacheline size. Setting to 32 bytes\n");
482 }
483}
484
485int __init pcibios_init(void)
486{
487 if (!raw_pci_ops) {
488 printk(KERN_WARNING "PCI: System does not support PCI\n");
489 return 0;
490 }
491
492 pcibios_set_cache_line_size();
493 pcibios_resource_survey();
494
495 if (pci_bf_sort >= pci_force_bf)
496 pci_sort_breadthfirst();
497 return 0;
498}
499
500char * __devinit pcibios_setup(char *str)
501{
502 if (!strcmp(str, "off")) {
503 pci_probe = 0;
504 return NULL;
505 } else if (!strcmp(str, "bfsort")) {
506 pci_bf_sort = pci_force_bf;
507 return NULL;
508 } else if (!strcmp(str, "nobfsort")) {
509 pci_bf_sort = pci_force_nobf;
510 return NULL;
511 }
512#ifdef CONFIG_PCI_BIOS
513 else if (!strcmp(str, "bios")) {
514 pci_probe = PCI_PROBE_BIOS;
515 return NULL;
516 } else if (!strcmp(str, "nobios")) {
517 pci_probe &= ~PCI_PROBE_BIOS;
518 return NULL;
519 } else if (!strcmp(str, "biosirq")) {
520 pci_probe |= PCI_BIOS_IRQ_SCAN;
521 return NULL;
522 } else if (!strncmp(str, "pirqaddr=", 9)) {
523 pirq_table_addr = simple_strtoul(str+9, NULL, 0);
524 return NULL;
525 }
526#endif
527#ifdef CONFIG_PCI_DIRECT
528 else if (!strcmp(str, "conf1")) {
529 pci_probe = PCI_PROBE_CONF1 | PCI_NO_CHECKS;
530 return NULL;
531 }
532 else if (!strcmp(str, "conf2")) {
533 pci_probe = PCI_PROBE_CONF2 | PCI_NO_CHECKS;
534 return NULL;
535 }
536#endif
537#ifdef CONFIG_PCI_MMCONFIG
538 else if (!strcmp(str, "nommconf")) {
539 pci_probe &= ~PCI_PROBE_MMCONF;
540 return NULL;
541 }
542 else if (!strcmp(str, "check_enable_amd_mmconf")) {
543 pci_probe |= PCI_CHECK_ENABLE_AMD_MMCONF;
544 return NULL;
545 }
546#endif
547 else if (!strcmp(str, "noacpi")) {
548 acpi_noirq_set();
549 return NULL;
550 }
551 else if (!strcmp(str, "noearly")) {
552 pci_probe |= PCI_PROBE_NOEARLY;
553 return NULL;
554 }
555#ifndef CONFIG_X86_VISWS
556 else if (!strcmp(str, "usepirqmask")) {
557 pci_probe |= PCI_USE_PIRQ_MASK;
558 return NULL;
559 } else if (!strncmp(str, "irqmask=", 8)) {
560 pcibios_irq_mask = simple_strtol(str+8, NULL, 0);
561 return NULL;
562 } else if (!strncmp(str, "lastbus=", 8)) {
563 pcibios_last_bus = simple_strtol(str+8, NULL, 0);
564 return NULL;
565 }
566#endif
567 else if (!strcmp(str, "rom")) {
568 pci_probe |= PCI_ASSIGN_ROMS;
569 return NULL;
570 } else if (!strcmp(str, "norom")) {
571 pci_probe |= PCI_NOASSIGN_ROMS;
572 return NULL;
573 } else if (!strcmp(str, "nobar")) {
574 pci_probe |= PCI_NOASSIGN_BARS;
575 return NULL;
576 } else if (!strcmp(str, "assign-busses")) {
577 pci_probe |= PCI_ASSIGN_ALL_BUSSES;
578 return NULL;
579 } else if (!strcmp(str, "use_crs")) {
580 pci_probe |= PCI_USE__CRS;
581 return NULL;
582 } else if (!strcmp(str, "nocrs")) {
583 pci_probe |= PCI_ROOT_NO_CRS;
584 return NULL;
585 } else if (!strcmp(str, "earlydump")) {
586 pci_early_dump_regs = 1;
587 return NULL;
588 } else if (!strcmp(str, "routeirq")) {
589 pci_routeirq = 1;
590 return NULL;
591 } else if (!strcmp(str, "skip_isa_align")) {
592 pci_probe |= PCI_CAN_SKIP_ISA_ALIGN;
593 return NULL;
594 } else if (!strcmp(str, "noioapicquirk")) {
595 noioapicquirk = 1;
596 return NULL;
597 } else if (!strcmp(str, "ioapicreroute")) {
598 if (noioapicreroute != -1)
599 noioapicreroute = 0;
600 return NULL;
601 } else if (!strcmp(str, "noioapicreroute")) {
602 if (noioapicreroute != -1)
603 noioapicreroute = 1;
604 return NULL;
605 }
606 return str;
607}
608
609unsigned int pcibios_assign_all_busses(void)
610{
611 return (pci_probe & PCI_ASSIGN_ALL_BUSSES) ? 1 : 0;
612}
613
614int pcibios_enable_device(struct pci_dev *dev, int mask)
615{
616 int err;
617
618 if ((err = pci_enable_resources(dev, mask)) < 0)
619 return err;
620
621 if (!pci_dev_msi_enabled(dev))
622 return pcibios_enable_irq(dev);
623 return 0;
624}
625
626void pcibios_disable_device (struct pci_dev *dev)
627{
628 if (!pci_dev_msi_enabled(dev) && pcibios_disable_irq)
629 pcibios_disable_irq(dev);
630}
631
632int pci_ext_cfg_avail(struct pci_dev *dev)
633{
634 if (raw_pci_ext_ops)
635 return 1;
636 else
637 return 0;
638}
639
640struct pci_bus * __devinit pci_scan_bus_on_node(int busno, struct pci_ops *ops, int node)
641{
642 struct pci_bus *bus = NULL;
643 struct pci_sysdata *sd;
644
645 /*
646 * Allocate per-root-bus (not per bus) arch-specific data.
647 * TODO: leak; this memory is never freed.
648 * It's arguable whether it's worth the trouble to care.
649 */
650 sd = kzalloc(sizeof(*sd), GFP_KERNEL);
651 if (!sd) {
652 printk(KERN_ERR "PCI: OOM, skipping PCI bus %02x\n", busno);
653 return NULL;
654 }
655 sd->node = node;
656 bus = pci_scan_bus(busno, ops, sd);
657 if (!bus)
658 kfree(sd);
659
660 return bus;
661}
662
663struct pci_bus * __devinit pci_scan_bus_with_sysdata(int busno)
664{
665 return pci_scan_bus_on_node(busno, &pci_root_ops, -1);
666}
667
668/*
669 * NUMA info for PCI busses
670 *
671 * Early arch code is responsible for filling in reasonable values here.
672 * A node id of "-1" means "use current node". In other words, if a bus
673 * has a -1 node id, it's not tightly coupled to any particular chunk
674 * of memory (as is the case on some Nehalem systems).
675 */
676#ifdef CONFIG_NUMA
677
678#define BUS_NR 256
679
680#ifdef CONFIG_X86_64
681
682static int mp_bus_to_node[BUS_NR] = {
683 [0 ... BUS_NR - 1] = -1
684};
685
686void set_mp_bus_to_node(int busnum, int node)
687{
688 if (busnum >= 0 && busnum < BUS_NR)
689 mp_bus_to_node[busnum] = node;
690}
691
692int get_mp_bus_to_node(int busnum)
693{
694 int node = -1;
695
696 if (busnum < 0 || busnum > (BUS_NR - 1))
697 return node;
698
699 node = mp_bus_to_node[busnum];
700
701 /*
702 * let numa_node_id to decide it later in dma_alloc_pages
703 * if there is no ram on that node
704 */
705 if (node != -1 && !node_online(node))
706 node = -1;
707
708 return node;
709}
710
711#else /* CONFIG_X86_32 */
712
713static int mp_bus_to_node[BUS_NR] = {
714 [0 ... BUS_NR - 1] = -1
715};
716
717void set_mp_bus_to_node(int busnum, int node)
718{
719 if (busnum >= 0 && busnum < BUS_NR)
720 mp_bus_to_node[busnum] = (unsigned char) node;
721}
722
723int get_mp_bus_to_node(int busnum)
724{
725 int node;
726
727 if (busnum < 0 || busnum > (BUS_NR - 1))
728 return 0;
729 node = mp_bus_to_node[busnum];
730 return node;
731}
732
733#endif /* CONFIG_X86_32 */
734
735#endif /* CONFIG_NUMA */
1/*
2 * Low-Level PCI Support for PC
3 *
4 * (c) 1999--2000 Martin Mares <mj@ucw.cz>
5 */
6
7#include <linux/sched.h>
8#include <linux/pci.h>
9#include <linux/pci-acpi.h>
10#include <linux/ioport.h>
11#include <linux/init.h>
12#include <linux/dmi.h>
13#include <linux/slab.h>
14
15#include <asm/acpi.h>
16#include <asm/segment.h>
17#include <asm/io.h>
18#include <asm/smp.h>
19#include <asm/pci_x86.h>
20#include <asm/setup.h>
21
22unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 |
23 PCI_PROBE_MMCONF;
24
25unsigned int pci_early_dump_regs;
26static int pci_bf_sort;
27static int smbios_type_b1_flag;
28int pci_routeirq;
29int noioapicquirk;
30#ifdef CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS
31int noioapicreroute = 0;
32#else
33int noioapicreroute = 1;
34#endif
35int pcibios_last_bus = -1;
36unsigned long pirq_table_addr;
37const struct pci_raw_ops *__read_mostly raw_pci_ops;
38const struct pci_raw_ops *__read_mostly raw_pci_ext_ops;
39
40int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn,
41 int reg, int len, u32 *val)
42{
43 if (domain == 0 && reg < 256 && raw_pci_ops)
44 return raw_pci_ops->read(domain, bus, devfn, reg, len, val);
45 if (raw_pci_ext_ops)
46 return raw_pci_ext_ops->read(domain, bus, devfn, reg, len, val);
47 return -EINVAL;
48}
49
50int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn,
51 int reg, int len, u32 val)
52{
53 if (domain == 0 && reg < 256 && raw_pci_ops)
54 return raw_pci_ops->write(domain, bus, devfn, reg, len, val);
55 if (raw_pci_ext_ops)
56 return raw_pci_ext_ops->write(domain, bus, devfn, reg, len, val);
57 return -EINVAL;
58}
59
60static int pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
61{
62 return raw_pci_read(pci_domain_nr(bus), bus->number,
63 devfn, where, size, value);
64}
65
66static int pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
67{
68 return raw_pci_write(pci_domain_nr(bus), bus->number,
69 devfn, where, size, value);
70}
71
72struct pci_ops pci_root_ops = {
73 .read = pci_read,
74 .write = pci_write,
75};
76
77/*
78 * This interrupt-safe spinlock protects all accesses to PCI
79 * configuration space.
80 */
81DEFINE_RAW_SPINLOCK(pci_config_lock);
82
83static int __init can_skip_ioresource_align(const struct dmi_system_id *d)
84{
85 pci_probe |= PCI_CAN_SKIP_ISA_ALIGN;
86 printk(KERN_INFO "PCI: %s detected, can skip ISA alignment\n", d->ident);
87 return 0;
88}
89
90static const struct dmi_system_id can_skip_pciprobe_dmi_table[] __initconst = {
91/*
92 * Systems where PCI IO resource ISA alignment can be skipped
93 * when the ISA enable bit in the bridge control is not set
94 */
95 {
96 .callback = can_skip_ioresource_align,
97 .ident = "IBM System x3800",
98 .matches = {
99 DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
100 DMI_MATCH(DMI_PRODUCT_NAME, "x3800"),
101 },
102 },
103 {
104 .callback = can_skip_ioresource_align,
105 .ident = "IBM System x3850",
106 .matches = {
107 DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
108 DMI_MATCH(DMI_PRODUCT_NAME, "x3850"),
109 },
110 },
111 {
112 .callback = can_skip_ioresource_align,
113 .ident = "IBM System x3950",
114 .matches = {
115 DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
116 DMI_MATCH(DMI_PRODUCT_NAME, "x3950"),
117 },
118 },
119 {}
120};
121
122void __init dmi_check_skip_isa_align(void)
123{
124 dmi_check_system(can_skip_pciprobe_dmi_table);
125}
126
127static void pcibios_fixup_device_resources(struct pci_dev *dev)
128{
129 struct resource *rom_r = &dev->resource[PCI_ROM_RESOURCE];
130 struct resource *bar_r;
131 int bar;
132
133 if (pci_probe & PCI_NOASSIGN_BARS) {
134 /*
135 * If the BIOS did not assign the BAR, zero out the
136 * resource so the kernel doesn't attmept to assign
137 * it later on in pci_assign_unassigned_resources
138 */
139 for (bar = 0; bar <= PCI_STD_RESOURCE_END; bar++) {
140 bar_r = &dev->resource[bar];
141 if (bar_r->start == 0 && bar_r->end != 0) {
142 bar_r->flags = 0;
143 bar_r->end = 0;
144 }
145 }
146 }
147
148 if (pci_probe & PCI_NOASSIGN_ROMS) {
149 if (rom_r->parent)
150 return;
151 if (rom_r->start) {
152 /* we deal with BIOS assigned ROM later */
153 return;
154 }
155 rom_r->start = rom_r->end = rom_r->flags = 0;
156 }
157}
158
159/*
160 * Called after each bus is probed, but before its children
161 * are examined.
162 */
163
164void pcibios_fixup_bus(struct pci_bus *b)
165{
166 struct pci_dev *dev;
167
168 pci_read_bridge_bases(b);
169 list_for_each_entry(dev, &b->devices, bus_list)
170 pcibios_fixup_device_resources(dev);
171}
172
173void pcibios_add_bus(struct pci_bus *bus)
174{
175 acpi_pci_add_bus(bus);
176}
177
178void pcibios_remove_bus(struct pci_bus *bus)
179{
180 acpi_pci_remove_bus(bus);
181}
182
183/*
184 * Only use DMI information to set this if nothing was passed
185 * on the kernel command line (which was parsed earlier).
186 */
187
188static int __init set_bf_sort(const struct dmi_system_id *d)
189{
190 if (pci_bf_sort == pci_bf_sort_default) {
191 pci_bf_sort = pci_dmi_bf;
192 printk(KERN_INFO "PCI: %s detected, enabling pci=bfsort.\n", d->ident);
193 }
194 return 0;
195}
196
197static void __init read_dmi_type_b1(const struct dmi_header *dm,
198 void *private_data)
199{
200 u8 *d = (u8 *)dm + 4;
201
202 if (dm->type != 0xB1)
203 return;
204 switch (((*(u32 *)d) >> 9) & 0x03) {
205 case 0x00:
206 printk(KERN_INFO "dmi type 0xB1 record - unknown flag\n");
207 break;
208 case 0x01: /* set pci=bfsort */
209 smbios_type_b1_flag = 1;
210 break;
211 case 0x02: /* do not set pci=bfsort */
212 smbios_type_b1_flag = 2;
213 break;
214 default:
215 break;
216 }
217}
218
219static int __init find_sort_method(const struct dmi_system_id *d)
220{
221 dmi_walk(read_dmi_type_b1, NULL);
222
223 if (smbios_type_b1_flag == 1) {
224 set_bf_sort(d);
225 return 0;
226 }
227 return -1;
228}
229
230/*
231 * Enable renumbering of PCI bus# ranges to reach all PCI busses (Cardbus)
232 */
233#ifdef __i386__
234static int __init assign_all_busses(const struct dmi_system_id *d)
235{
236 pci_probe |= PCI_ASSIGN_ALL_BUSSES;
237 printk(KERN_INFO "%s detected: enabling PCI bus# renumbering"
238 " (pci=assign-busses)\n", d->ident);
239 return 0;
240}
241#endif
242
243static int __init set_scan_all(const struct dmi_system_id *d)
244{
245 printk(KERN_INFO "PCI: %s detected, enabling pci=pcie_scan_all\n",
246 d->ident);
247 pci_add_flags(PCI_SCAN_ALL_PCIE_DEVS);
248 return 0;
249}
250
251static const struct dmi_system_id pciprobe_dmi_table[] __initconst = {
252#ifdef __i386__
253/*
254 * Laptops which need pci=assign-busses to see Cardbus cards
255 */
256 {
257 .callback = assign_all_busses,
258 .ident = "Samsung X20 Laptop",
259 .matches = {
260 DMI_MATCH(DMI_SYS_VENDOR, "Samsung Electronics"),
261 DMI_MATCH(DMI_PRODUCT_NAME, "SX20S"),
262 },
263 },
264#endif /* __i386__ */
265 {
266 .callback = set_bf_sort,
267 .ident = "Dell PowerEdge 1950",
268 .matches = {
269 DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
270 DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1950"),
271 },
272 },
273 {
274 .callback = set_bf_sort,
275 .ident = "Dell PowerEdge 1955",
276 .matches = {
277 DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
278 DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1955"),
279 },
280 },
281 {
282 .callback = set_bf_sort,
283 .ident = "Dell PowerEdge 2900",
284 .matches = {
285 DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
286 DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2900"),
287 },
288 },
289 {
290 .callback = set_bf_sort,
291 .ident = "Dell PowerEdge 2950",
292 .matches = {
293 DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
294 DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2950"),
295 },
296 },
297 {
298 .callback = set_bf_sort,
299 .ident = "Dell PowerEdge R900",
300 .matches = {
301 DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
302 DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge R900"),
303 },
304 },
305 {
306 .callback = find_sort_method,
307 .ident = "Dell System",
308 .matches = {
309 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"),
310 },
311 },
312 {
313 .callback = set_bf_sort,
314 .ident = "HP ProLiant BL20p G3",
315 .matches = {
316 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
317 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G3"),
318 },
319 },
320 {
321 .callback = set_bf_sort,
322 .ident = "HP ProLiant BL20p G4",
323 .matches = {
324 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
325 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G4"),
326 },
327 },
328 {
329 .callback = set_bf_sort,
330 .ident = "HP ProLiant BL30p G1",
331 .matches = {
332 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
333 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL30p G1"),
334 },
335 },
336 {
337 .callback = set_bf_sort,
338 .ident = "HP ProLiant BL25p G1",
339 .matches = {
340 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
341 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL25p G1"),
342 },
343 },
344 {
345 .callback = set_bf_sort,
346 .ident = "HP ProLiant BL35p G1",
347 .matches = {
348 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
349 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL35p G1"),
350 },
351 },
352 {
353 .callback = set_bf_sort,
354 .ident = "HP ProLiant BL45p G1",
355 .matches = {
356 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
357 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G1"),
358 },
359 },
360 {
361 .callback = set_bf_sort,
362 .ident = "HP ProLiant BL45p G2",
363 .matches = {
364 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
365 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G2"),
366 },
367 },
368 {
369 .callback = set_bf_sort,
370 .ident = "HP ProLiant BL460c G1",
371 .matches = {
372 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
373 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL460c G1"),
374 },
375 },
376 {
377 .callback = set_bf_sort,
378 .ident = "HP ProLiant BL465c G1",
379 .matches = {
380 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
381 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL465c G1"),
382 },
383 },
384 {
385 .callback = set_bf_sort,
386 .ident = "HP ProLiant BL480c G1",
387 .matches = {
388 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
389 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL480c G1"),
390 },
391 },
392 {
393 .callback = set_bf_sort,
394 .ident = "HP ProLiant BL685c G1",
395 .matches = {
396 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
397 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL685c G1"),
398 },
399 },
400 {
401 .callback = set_bf_sort,
402 .ident = "HP ProLiant DL360",
403 .matches = {
404 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
405 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL360"),
406 },
407 },
408 {
409 .callback = set_bf_sort,
410 .ident = "HP ProLiant DL380",
411 .matches = {
412 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
413 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL380"),
414 },
415 },
416#ifdef __i386__
417 {
418 .callback = assign_all_busses,
419 .ident = "Compaq EVO N800c",
420 .matches = {
421 DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
422 DMI_MATCH(DMI_PRODUCT_NAME, "EVO N800c"),
423 },
424 },
425#endif
426 {
427 .callback = set_bf_sort,
428 .ident = "HP ProLiant DL385 G2",
429 .matches = {
430 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
431 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL385 G2"),
432 },
433 },
434 {
435 .callback = set_bf_sort,
436 .ident = "HP ProLiant DL585 G2",
437 .matches = {
438 DMI_MATCH(DMI_SYS_VENDOR, "HP"),
439 DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL585 G2"),
440 },
441 },
442 {
443 .callback = set_scan_all,
444 .ident = "Stratus/NEC ftServer",
445 .matches = {
446 DMI_MATCH(DMI_SYS_VENDOR, "Stratus"),
447 DMI_MATCH(DMI_PRODUCT_NAME, "ftServer"),
448 },
449 },
450 {
451 .callback = set_scan_all,
452 .ident = "Stratus/NEC ftServer",
453 .matches = {
454 DMI_MATCH(DMI_SYS_VENDOR, "NEC"),
455 DMI_MATCH(DMI_PRODUCT_NAME, "Express5800/R32"),
456 },
457 },
458 {
459 .callback = set_scan_all,
460 .ident = "Stratus/NEC ftServer",
461 .matches = {
462 DMI_MATCH(DMI_SYS_VENDOR, "NEC"),
463 DMI_MATCH(DMI_PRODUCT_NAME, "Express5800/R31"),
464 },
465 },
466 {}
467};
468
469void __init dmi_check_pciprobe(void)
470{
471 dmi_check_system(pciprobe_dmi_table);
472}
473
474void pcibios_scan_root(int busnum)
475{
476 struct pci_bus *bus;
477 struct pci_sysdata *sd;
478 LIST_HEAD(resources);
479
480 sd = kzalloc(sizeof(*sd), GFP_KERNEL);
481 if (!sd) {
482 printk(KERN_ERR "PCI: OOM, skipping PCI bus %02x\n", busnum);
483 return;
484 }
485 sd->node = x86_pci_root_bus_node(busnum);
486 x86_pci_root_bus_resources(busnum, &resources);
487 printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busnum);
488 bus = pci_scan_root_bus(NULL, busnum, &pci_root_ops, sd, &resources);
489 if (!bus) {
490 pci_free_resource_list(&resources);
491 kfree(sd);
492 return;
493 }
494 pci_bus_add_devices(bus);
495}
496
497void __init pcibios_set_cache_line_size(void)
498{
499 struct cpuinfo_x86 *c = &boot_cpu_data;
500
501 /*
502 * Set PCI cacheline size to that of the CPU if the CPU has reported it.
503 * (For older CPUs that don't support cpuid, we se it to 32 bytes
504 * It's also good for 386/486s (which actually have 16)
505 * as quite a few PCI devices do not support smaller values.
506 */
507 if (c->x86_clflush_size > 0) {
508 pci_dfl_cache_line_size = c->x86_clflush_size >> 2;
509 printk(KERN_DEBUG "PCI: pci_cache_line_size set to %d bytes\n",
510 pci_dfl_cache_line_size << 2);
511 } else {
512 pci_dfl_cache_line_size = 32 >> 2;
513 printk(KERN_DEBUG "PCI: Unknown cacheline size. Setting to 32 bytes\n");
514 }
515}
516
517int __init pcibios_init(void)
518{
519 if (!raw_pci_ops) {
520 printk(KERN_WARNING "PCI: System does not support PCI\n");
521 return 0;
522 }
523
524 pcibios_set_cache_line_size();
525 pcibios_resource_survey();
526
527 if (pci_bf_sort >= pci_force_bf)
528 pci_sort_breadthfirst();
529 return 0;
530}
531
532char *__init pcibios_setup(char *str)
533{
534 if (!strcmp(str, "off")) {
535 pci_probe = 0;
536 return NULL;
537 } else if (!strcmp(str, "bfsort")) {
538 pci_bf_sort = pci_force_bf;
539 return NULL;
540 } else if (!strcmp(str, "nobfsort")) {
541 pci_bf_sort = pci_force_nobf;
542 return NULL;
543 }
544#ifdef CONFIG_PCI_BIOS
545 else if (!strcmp(str, "bios")) {
546 pci_probe = PCI_PROBE_BIOS;
547 return NULL;
548 } else if (!strcmp(str, "nobios")) {
549 pci_probe &= ~PCI_PROBE_BIOS;
550 return NULL;
551 } else if (!strcmp(str, "biosirq")) {
552 pci_probe |= PCI_BIOS_IRQ_SCAN;
553 return NULL;
554 } else if (!strncmp(str, "pirqaddr=", 9)) {
555 pirq_table_addr = simple_strtoul(str+9, NULL, 0);
556 return NULL;
557 }
558#endif
559#ifdef CONFIG_PCI_DIRECT
560 else if (!strcmp(str, "conf1")) {
561 pci_probe = PCI_PROBE_CONF1 | PCI_NO_CHECKS;
562 return NULL;
563 }
564 else if (!strcmp(str, "conf2")) {
565 pci_probe = PCI_PROBE_CONF2 | PCI_NO_CHECKS;
566 return NULL;
567 }
568#endif
569#ifdef CONFIG_PCI_MMCONFIG
570 else if (!strcmp(str, "nommconf")) {
571 pci_probe &= ~PCI_PROBE_MMCONF;
572 return NULL;
573 }
574 else if (!strcmp(str, "check_enable_amd_mmconf")) {
575 pci_probe |= PCI_CHECK_ENABLE_AMD_MMCONF;
576 return NULL;
577 }
578#endif
579 else if (!strcmp(str, "noacpi")) {
580 acpi_noirq_set();
581 return NULL;
582 }
583 else if (!strcmp(str, "noearly")) {
584 pci_probe |= PCI_PROBE_NOEARLY;
585 return NULL;
586 }
587 else if (!strcmp(str, "usepirqmask")) {
588 pci_probe |= PCI_USE_PIRQ_MASK;
589 return NULL;
590 } else if (!strncmp(str, "irqmask=", 8)) {
591 pcibios_irq_mask = simple_strtol(str+8, NULL, 0);
592 return NULL;
593 } else if (!strncmp(str, "lastbus=", 8)) {
594 pcibios_last_bus = simple_strtol(str+8, NULL, 0);
595 return NULL;
596 } else if (!strcmp(str, "rom")) {
597 pci_probe |= PCI_ASSIGN_ROMS;
598 return NULL;
599 } else if (!strcmp(str, "norom")) {
600 pci_probe |= PCI_NOASSIGN_ROMS;
601 return NULL;
602 } else if (!strcmp(str, "nobar")) {
603 pci_probe |= PCI_NOASSIGN_BARS;
604 return NULL;
605 } else if (!strcmp(str, "assign-busses")) {
606 pci_probe |= PCI_ASSIGN_ALL_BUSSES;
607 return NULL;
608 } else if (!strcmp(str, "use_crs")) {
609 pci_probe |= PCI_USE__CRS;
610 return NULL;
611 } else if (!strcmp(str, "nocrs")) {
612 pci_probe |= PCI_ROOT_NO_CRS;
613 return NULL;
614 } else if (!strcmp(str, "earlydump")) {
615 pci_early_dump_regs = 1;
616 return NULL;
617 } else if (!strcmp(str, "routeirq")) {
618 pci_routeirq = 1;
619 return NULL;
620 } else if (!strcmp(str, "skip_isa_align")) {
621 pci_probe |= PCI_CAN_SKIP_ISA_ALIGN;
622 return NULL;
623 } else if (!strcmp(str, "noioapicquirk")) {
624 noioapicquirk = 1;
625 return NULL;
626 } else if (!strcmp(str, "ioapicreroute")) {
627 if (noioapicreroute != -1)
628 noioapicreroute = 0;
629 return NULL;
630 } else if (!strcmp(str, "noioapicreroute")) {
631 if (noioapicreroute != -1)
632 noioapicreroute = 1;
633 return NULL;
634 }
635 return str;
636}
637
638unsigned int pcibios_assign_all_busses(void)
639{
640 return (pci_probe & PCI_ASSIGN_ALL_BUSSES) ? 1 : 0;
641}
642
643#if defined(CONFIG_X86_DEV_DMA_OPS) && defined(CONFIG_PCI_DOMAINS)
644static LIST_HEAD(dma_domain_list);
645static DEFINE_SPINLOCK(dma_domain_list_lock);
646
647void add_dma_domain(struct dma_domain *domain)
648{
649 spin_lock(&dma_domain_list_lock);
650 list_add(&domain->node, &dma_domain_list);
651 spin_unlock(&dma_domain_list_lock);
652}
653EXPORT_SYMBOL_GPL(add_dma_domain);
654
655void del_dma_domain(struct dma_domain *domain)
656{
657 spin_lock(&dma_domain_list_lock);
658 list_del(&domain->node);
659 spin_unlock(&dma_domain_list_lock);
660}
661EXPORT_SYMBOL_GPL(del_dma_domain);
662
663static void set_dma_domain_ops(struct pci_dev *pdev)
664{
665 struct dma_domain *domain;
666
667 spin_lock(&dma_domain_list_lock);
668 list_for_each_entry(domain, &dma_domain_list, node) {
669 if (pci_domain_nr(pdev->bus) == domain->domain_nr) {
670 pdev->dev.archdata.dma_ops = domain->dma_ops;
671 break;
672 }
673 }
674 spin_unlock(&dma_domain_list_lock);
675}
676#else
677static void set_dma_domain_ops(struct pci_dev *pdev) {}
678#endif
679
680int pcibios_add_device(struct pci_dev *dev)
681{
682 struct setup_data *data;
683 struct pci_setup_rom *rom;
684 u64 pa_data;
685
686 pa_data = boot_params.hdr.setup_data;
687 while (pa_data) {
688 data = ioremap(pa_data, sizeof(*rom));
689 if (!data)
690 return -ENOMEM;
691
692 if (data->type == SETUP_PCI) {
693 rom = (struct pci_setup_rom *)data;
694
695 if ((pci_domain_nr(dev->bus) == rom->segment) &&
696 (dev->bus->number == rom->bus) &&
697 (PCI_SLOT(dev->devfn) == rom->device) &&
698 (PCI_FUNC(dev->devfn) == rom->function) &&
699 (dev->vendor == rom->vendor) &&
700 (dev->device == rom->devid)) {
701 dev->rom = pa_data +
702 offsetof(struct pci_setup_rom, romdata);
703 dev->romlen = rom->pcilen;
704 }
705 }
706 pa_data = data->next;
707 iounmap(data);
708 }
709 set_dma_domain_ops(dev);
710 return 0;
711}
712
713int pcibios_enable_device(struct pci_dev *dev, int mask)
714{
715 int err;
716
717 if ((err = pci_enable_resources(dev, mask)) < 0)
718 return err;
719
720 if (!pci_dev_msi_enabled(dev))
721 return pcibios_enable_irq(dev);
722 return 0;
723}
724
725void pcibios_disable_device (struct pci_dev *dev)
726{
727 if (!pci_dev_msi_enabled(dev) && pcibios_disable_irq)
728 pcibios_disable_irq(dev);
729}
730
731int pci_ext_cfg_avail(void)
732{
733 if (raw_pci_ext_ops)
734 return 1;
735 else
736 return 0;
737}