Linux Audio

Check our new training course

Loading...
v3.1
  1/*
  2 * This file is subject to the terms and conditions of the GNU General Public
  3 * License.  See the file "COPYING" in the main directory of this archive
  4 * for more details.
  5 *
  6 * Copyright (C) 1994, 1995, 1996, 1998, 1999, 2002, 2003 Ralf Baechle
  7 * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
  8 * Copyright (C) 1994, 1995, 1996, by Andreas Busse
  9 * Copyright (C) 1999 Silicon Graphics, Inc.
 10 * Copyright (C) 2000 MIPS Technologies, Inc.
 11 *    written by Carsten Langgaard, carstenl@mips.com
 12 */
 13#include <asm/asm.h>
 14#include <asm/cachectl.h>
 15#include <asm/fpregdef.h>
 16#include <asm/mipsregs.h>
 17#include <asm/asm-offsets.h>
 18#include <asm/page.h>
 19#include <asm/pgtable-bits.h>
 20#include <asm/regdef.h>
 21#include <asm/stackframe.h>
 22#include <asm/thread_info.h>
 23
 24#include <asm/asmmacro.h>
 25
 
 
 
 26/*
 27 * Offset to the current process status flags, the first 32 bytes of the
 28 * stack are not used.
 29 */
 30#define ST_OFF (_THREAD_SIZE - 32 - PT_SIZE + PT_STATUS)
 31
 32/*
 33 * FPU context is saved iff the process has used it's FPU in the current
 34 * time slice as indicated by _TIF_USEDFPU.  In any case, the CU1 bit for user
 35 * space STATUS register should be 0, so that a process *always* starts its
 36 * userland with FPU disabled after each context switch.
 37 *
 38 * FPU will be enabled as soon as the process accesses FPU again, through
 39 * do_cpu() trap.
 40 */
 41
 42/*
 43 * task_struct *resume(task_struct *prev, task_struct *next,
 44 *                     struct thread_info *next_ti)
 45 */
 46	.align	5
 47	LEAF(resume)
 48	mfc0	t1, CP0_STATUS
 49	LONG_S	t1, THREAD_STATUS(a0)
 50	cpu_save_nonscratch a0
 51	LONG_S	ra, THREAD_REG31(a0)
 52
 53	/*
 54	 * check if we need to save FPU registers
 55	 */
 56	PTR_L	t3, TASK_THREAD_INFO(a0)
 57	LONG_L	t0, TI_FLAGS(t3)
 58	li	t1, _TIF_USEDFPU
 59	and	t2, t0, t1
 60	beqz	t2, 1f
 61	nor	t1, zero, t1
 62
 63	and	t0, t0, t1
 64	LONG_S	t0, TI_FLAGS(t3)
 65
 66	/*
 67	 * clear saved user stack CU1 bit
 68	 */
 69	LONG_L	t0, ST_OFF(t3)
 70	li	t1, ~ST0_CU1
 71	and	t0, t0, t1
 72	LONG_S	t0, ST_OFF(t3)
 73
 74	fpu_save_double a0 t0 t1		# c0_status passed in t0
 75						# clobbers t1
 761:
 77
 78	/*
 79	 * The order of restoring the registers takes care of the race
 80	 * updating $28, $29 and kernelsp without disabling ints.
 81	 */
 82	move	$28, a2
 83	cpu_restore_nonscratch a1
 84
 85	PTR_ADDU	t0, $28, _THREAD_SIZE - 32
 86	set_saved_sp	t0, t1, t2
 87#ifdef CONFIG_MIPS_MT_SMTC
 88	/* Read-modify-writes of Status must be atomic on a VPE */
 89	mfc0	t2, CP0_TCSTATUS
 90	ori	t1, t2, TCSTATUS_IXMT
 91	mtc0	t1, CP0_TCSTATUS
 92	andi	t2, t2, TCSTATUS_IXMT
 93	_ehb
 94	DMT	8				# dmt	t0
 95	move	t1,ra
 96	jal	mips_ihb
 97	move	ra,t1
 98#endif /* CONFIG_MIPS_MT_SMTC */
 99	mfc0	t1, CP0_STATUS		/* Do we really need this? */
100	li	a3, 0xff01
101	and	t1, a3
102	LONG_L	a2, THREAD_STATUS(a1)
103	nor	a3, $0, a3
104	and	a2, a3
105	or	a2, t1
106	mtc0	a2, CP0_STATUS
107#ifdef CONFIG_MIPS_MT_SMTC
108	_ehb
109	andi	t0, t0, VPECONTROL_TE
110	beqz	t0, 1f
111	emt
1121:
113	mfc0	t1, CP0_TCSTATUS
114	xori	t1, t1, TCSTATUS_IXMT
115	or	t1, t1, t2
116	mtc0	t1, CP0_TCSTATUS
117	_ehb
118#endif /* CONFIG_MIPS_MT_SMTC */
119	move	v0, a0
120	jr	ra
121	END(resume)
122
 
 
123/*
124 * Save a thread's fp context.
125 */
126LEAF(_save_fp)
127#ifdef CONFIG_64BIT
 
128	mfc0	t0, CP0_STATUS
129#endif
130	fpu_save_double a0 t0 t1		# clobbers t1
131	jr	ra
132	END(_save_fp)
133
134/*
135 * Restore a thread's fp context.
136 */
137LEAF(_restore_fp)
138#ifdef CONFIG_64BIT
 
139	mfc0	t0, CP0_STATUS
140#endif
141	fpu_restore_double a0 t0 t1		# clobbers t1
142	jr	ra
143	END(_restore_fp)
144
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
145/*
146 * Load the FPU with signalling NANS.  This bit pattern we're using has
147 * the property that no matter whether considered as single or as double
148 * precision represents signaling NANS.
149 *
150 * We initialize fcr31 to rounding to nearest, no exceptions.
151 */
152
153#define FPU_DEFAULT  0x00000000
 
154
155LEAF(_init_fpu)
156#ifdef CONFIG_MIPS_MT_SMTC
157	/* Rather than manipulate per-VPE Status, set per-TC bit in TCStatus */
158	mfc0	t0, CP0_TCSTATUS
159	/* Bit position is the same for Status, TCStatus */
160	li	t1, ST0_CU1
161	or	t0, t1
162	mtc0	t0, CP0_TCSTATUS
163#else /* Normal MIPS CU1 enable */
164	mfc0	t0, CP0_STATUS
165	li	t1, ST0_CU1
166	or	t0, t1
167	mtc0	t0, CP0_STATUS
168#endif /* CONFIG_MIPS_MT_SMTC */
169	enable_fpu_hazard
170
171	li	t1, FPU_DEFAULT
172	ctc1	t1, fcr31
173
174	li	t1, -1				# SNaN
175
176#ifdef CONFIG_64BIT
177	sll	t0, t0, 5
178	bgez	t0, 1f				# 16 / 32 register mode?
179
180	dmtc1	t1, $f1
181	dmtc1	t1, $f3
182	dmtc1	t1, $f5
183	dmtc1	t1, $f7
184	dmtc1	t1, $f9
185	dmtc1	t1, $f11
186	dmtc1	t1, $f13
187	dmtc1	t1, $f15
188	dmtc1	t1, $f17
189	dmtc1	t1, $f19
190	dmtc1	t1, $f21
191	dmtc1	t1, $f23
192	dmtc1	t1, $f25
193	dmtc1	t1, $f27
194	dmtc1	t1, $f29
195	dmtc1	t1, $f31
1961:
197#endif
198
199#ifdef CONFIG_CPU_MIPS32
200	mtc1	t1, $f0
201	mtc1	t1, $f1
202	mtc1	t1, $f2
203	mtc1	t1, $f3
204	mtc1	t1, $f4
205	mtc1	t1, $f5
206	mtc1	t1, $f6
207	mtc1	t1, $f7
208	mtc1	t1, $f8
209	mtc1	t1, $f9
210	mtc1	t1, $f10
211	mtc1	t1, $f11
212	mtc1	t1, $f12
213	mtc1	t1, $f13
214	mtc1	t1, $f14
215	mtc1	t1, $f15
216	mtc1	t1, $f16
217	mtc1	t1, $f17
218	mtc1	t1, $f18
219	mtc1	t1, $f19
220	mtc1	t1, $f20
221	mtc1	t1, $f21
222	mtc1	t1, $f22
223	mtc1	t1, $f23
224	mtc1	t1, $f24
225	mtc1	t1, $f25
226	mtc1	t1, $f26
227	mtc1	t1, $f27
228	mtc1	t1, $f28
229	mtc1	t1, $f29
230	mtc1	t1, $f30
231	mtc1	t1, $f31
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
232#else
233	.set	mips3
234	dmtc1	t1, $f0
235	dmtc1	t1, $f2
236	dmtc1	t1, $f4
237	dmtc1	t1, $f6
238	dmtc1	t1, $f8
239	dmtc1	t1, $f10
240	dmtc1	t1, $f12
241	dmtc1	t1, $f14
242	dmtc1	t1, $f16
243	dmtc1	t1, $f18
244	dmtc1	t1, $f20
245	dmtc1	t1, $f22
246	dmtc1	t1, $f24
247	dmtc1	t1, $f26
248	dmtc1	t1, $f28
249	dmtc1	t1, $f30
250#endif
251	jr	ra
252	END(_init_fpu)
v4.6
  1/*
  2 * This file is subject to the terms and conditions of the GNU General Public
  3 * License.  See the file "COPYING" in the main directory of this archive
  4 * for more details.
  5 *
  6 * Copyright (C) 1994, 1995, 1996, 1998, 1999, 2002, 2003 Ralf Baechle
  7 * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
  8 * Copyright (C) 1994, 1995, 1996, by Andreas Busse
  9 * Copyright (C) 1999 Silicon Graphics, Inc.
 10 * Copyright (C) 2000 MIPS Technologies, Inc.
 11 *    written by Carsten Langgaard, carstenl@mips.com
 12 */
 13#include <asm/asm.h>
 14#include <asm/cachectl.h>
 15#include <asm/fpregdef.h>
 16#include <asm/mipsregs.h>
 17#include <asm/asm-offsets.h>
 
 18#include <asm/pgtable-bits.h>
 19#include <asm/regdef.h>
 20#include <asm/stackframe.h>
 21#include <asm/thread_info.h>
 22
 23#include <asm/asmmacro.h>
 24
 25/* preprocessor replaces the fp in ".set fp=64" with $30 otherwise */
 26#undef fp
 27
 28/*
 29 * Offset to the current process status flags, the first 32 bytes of the
 30 * stack are not used.
 31 */
 32#define ST_OFF (_THREAD_SIZE - 32 - PT_SIZE + PT_STATUS)
 33
 34#ifndef USE_ALTERNATE_RESUME_IMPL
 
 
 
 
 
 
 
 
 
 35/*
 36 * task_struct *resume(task_struct *prev, task_struct *next,
 37 *		       struct thread_info *next_ti)
 38 */
 39	.align	5
 40	LEAF(resume)
 41	mfc0	t1, CP0_STATUS
 42	LONG_S	t1, THREAD_STATUS(a0)
 43	cpu_save_nonscratch a0
 44	LONG_S	ra, THREAD_REG31(a0)
 45
 46#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
 47	PTR_LA	t8, __stack_chk_guard
 48	LONG_L	t9, TASK_STACK_CANARY(a1)
 49	LONG_S	t9, 0(t8)
 50#endif
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 51
 52	/*
 53	 * The order of restoring the registers takes care of the race
 54	 * updating $28, $29 and kernelsp without disabling ints.
 55	 */
 56	move	$28, a2
 57	cpu_restore_nonscratch a1
 58
 59	PTR_ADDU	t0, $28, _THREAD_SIZE - 32
 60	set_saved_sp	t0, t1, t2
 
 
 
 
 
 
 
 
 
 
 
 
 61	mfc0	t1, CP0_STATUS		/* Do we really need this? */
 62	li	a3, 0xff01
 63	and	t1, a3
 64	LONG_L	a2, THREAD_STATUS(a1)
 65	nor	a3, $0, a3
 66	and	a2, a3
 67	or	a2, t1
 68	mtc0	a2, CP0_STATUS
 
 
 
 
 
 
 
 
 
 
 
 
 69	move	v0, a0
 70	jr	ra
 71	END(resume)
 72
 73#endif /* USE_ALTERNATE_RESUME_IMPL */
 74
 75/*
 76 * Save a thread's fp context.
 77 */
 78LEAF(_save_fp)
 79#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2) || \
 80		defined(CONFIG_CPU_MIPS32_R6)
 81	mfc0	t0, CP0_STATUS
 82#endif
 83	fpu_save_double a0 t0 t1		# clobbers t1
 84	jr	ra
 85	END(_save_fp)
 86
 87/*
 88 * Restore a thread's fp context.
 89 */
 90LEAF(_restore_fp)
 91#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2) || \
 92		defined(CONFIG_CPU_MIPS32_R6)
 93	mfc0	t0, CP0_STATUS
 94#endif
 95	fpu_restore_double a0 t0 t1		# clobbers t1
 96	jr	ra
 97	END(_restore_fp)
 98
 99#ifdef CONFIG_CPU_HAS_MSA
100
101/*
102 * Save a thread's MSA vector context.
103 */
104LEAF(_save_msa)
105	msa_save_all	a0
106	jr	ra
107	END(_save_msa)
108
109/*
110 * Restore a thread's MSA vector context.
111 */
112LEAF(_restore_msa)
113	msa_restore_all	a0
114	jr	ra
115	END(_restore_msa)
116
117LEAF(_init_msa_upper)
118	msa_init_all_upper
119	jr	ra
120	END(_init_msa_upper)
121
122#endif
123
124/*
125 * Load the FPU with signalling NANS.  This bit pattern we're using has
126 * the property that no matter whether considered as single or as double
127 * precision represents signaling NANS.
128 *
129 * The value to initialize fcr31 to comes in $a0.
130 */
131
132	.set push
133	SET_HARDFLOAT
134
135LEAF(_init_fpu)
 
 
 
 
 
 
 
 
136	mfc0	t0, CP0_STATUS
137	li	t1, ST0_CU1
138	or	t0, t1
139	mtc0	t0, CP0_STATUS
 
140	enable_fpu_hazard
141
142	ctc1	a0, fcr31
 
143
144	li	t1, -1				# SNaN
145
146#ifdef CONFIG_64BIT
147	sll	t0, t0, 5
148	bgez	t0, 1f				# 16 / 32 register mode?
149
150	dmtc1	t1, $f1
151	dmtc1	t1, $f3
152	dmtc1	t1, $f5
153	dmtc1	t1, $f7
154	dmtc1	t1, $f9
155	dmtc1	t1, $f11
156	dmtc1	t1, $f13
157	dmtc1	t1, $f15
158	dmtc1	t1, $f17
159	dmtc1	t1, $f19
160	dmtc1	t1, $f21
161	dmtc1	t1, $f23
162	dmtc1	t1, $f25
163	dmtc1	t1, $f27
164	dmtc1	t1, $f29
165	dmtc1	t1, $f31
1661:
167#endif
168
169#ifdef CONFIG_CPU_MIPS32
170	mtc1	t1, $f0
171	mtc1	t1, $f1
172	mtc1	t1, $f2
173	mtc1	t1, $f3
174	mtc1	t1, $f4
175	mtc1	t1, $f5
176	mtc1	t1, $f6
177	mtc1	t1, $f7
178	mtc1	t1, $f8
179	mtc1	t1, $f9
180	mtc1	t1, $f10
181	mtc1	t1, $f11
182	mtc1	t1, $f12
183	mtc1	t1, $f13
184	mtc1	t1, $f14
185	mtc1	t1, $f15
186	mtc1	t1, $f16
187	mtc1	t1, $f17
188	mtc1	t1, $f18
189	mtc1	t1, $f19
190	mtc1	t1, $f20
191	mtc1	t1, $f21
192	mtc1	t1, $f22
193	mtc1	t1, $f23
194	mtc1	t1, $f24
195	mtc1	t1, $f25
196	mtc1	t1, $f26
197	mtc1	t1, $f27
198	mtc1	t1, $f28
199	mtc1	t1, $f29
200	mtc1	t1, $f30
201	mtc1	t1, $f31
202
203#if defined(CONFIG_CPU_MIPS32_R2) || defined(CONFIG_CPU_MIPS32_R6)
204	.set    push
205	.set    MIPS_ISA_LEVEL_RAW
206	.set	fp=64
207	sll     t0, t0, 5			# is Status.FR set?
208	bgez    t0, 1f				# no: skip setting upper 32b
209
210	mthc1   t1, $f0
211	mthc1   t1, $f1
212	mthc1   t1, $f2
213	mthc1   t1, $f3
214	mthc1   t1, $f4
215	mthc1   t1, $f5
216	mthc1   t1, $f6
217	mthc1   t1, $f7
218	mthc1   t1, $f8
219	mthc1   t1, $f9
220	mthc1   t1, $f10
221	mthc1   t1, $f11
222	mthc1   t1, $f12
223	mthc1   t1, $f13
224	mthc1   t1, $f14
225	mthc1   t1, $f15
226	mthc1   t1, $f16
227	mthc1   t1, $f17
228	mthc1   t1, $f18
229	mthc1   t1, $f19
230	mthc1   t1, $f20
231	mthc1   t1, $f21
232	mthc1   t1, $f22
233	mthc1   t1, $f23
234	mthc1   t1, $f24
235	mthc1   t1, $f25
236	mthc1   t1, $f26
237	mthc1   t1, $f27
238	mthc1   t1, $f28
239	mthc1   t1, $f29
240	mthc1   t1, $f30
241	mthc1   t1, $f31
2421:	.set    pop
243#endif /* CONFIG_CPU_MIPS32_R2 || CONFIG_CPU_MIPS32_R6 */
244#else
245	.set	MIPS_ISA_ARCH_LEVEL_RAW
246	dmtc1	t1, $f0
247	dmtc1	t1, $f2
248	dmtc1	t1, $f4
249	dmtc1	t1, $f6
250	dmtc1	t1, $f8
251	dmtc1	t1, $f10
252	dmtc1	t1, $f12
253	dmtc1	t1, $f14
254	dmtc1	t1, $f16
255	dmtc1	t1, $f18
256	dmtc1	t1, $f20
257	dmtc1	t1, $f22
258	dmtc1	t1, $f24
259	dmtc1	t1, $f26
260	dmtc1	t1, $f28
261	dmtc1	t1, $f30
262#endif
263	jr	ra
264	END(_init_fpu)
265
266	.set pop	/* SET_HARDFLOAT */