Loading...
1/*
2 * Platform level USB initialization for FS USB OTG controller on omap1 and 24xx
3 *
4 * Copyright (C) 2004 Texas Instruments, Inc.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
19 */
20
21#include <linux/module.h>
22#include <linux/kernel.h>
23#include <linux/init.h>
24#include <linux/platform_device.h>
25#include <linux/io.h>
26
27#include <asm/irq.h>
28
29#include <plat/mux.h>
30#include <plat/usb.h>
31
32/* These routines should handle the standard chip-specific modes
33 * for usb0/1/2 ports, covering basic mux and transceiver setup.
34 *
35 * Some board-*.c files will need to set up additional mux options,
36 * like for suspend handling, vbus sensing, GPIOs, and the D+ pullup.
37 */
38
39/* TESTED ON:
40 * - 1611B H2 (with usb1 mini-AB) using standard Mini-B or OTG cables
41 * - 5912 OSK OHCI (with usb0 standard-A), standard A-to-B cables
42 * - 5912 OSK UDC, with *nonstandard* A-to-A cable
43 * - 1510 Innovator UDC with bundled usb0 cable
44 * - 1510 Innovator OHCI with bundled usb1/usb2 cable
45 * - 1510 Innovator OHCI with custom usb0 cable, feeding 5V VBUS
46 * - 1710 custom development board using alternate pin group
47 * - 1710 H3 (with usb1 mini-AB) using standard Mini-B or OTG cables
48 */
49
50#define INT_USB_IRQ_GEN IH2_BASE + 20
51#define INT_USB_IRQ_NISO IH2_BASE + 30
52#define INT_USB_IRQ_ISO IH2_BASE + 29
53#define INT_USB_IRQ_HGEN INT_USB_HHC_1
54#define INT_USB_IRQ_OTG IH2_BASE + 8
55
56#ifdef CONFIG_USB_GADGET_OMAP
57
58static struct resource udc_resources[] = {
59 /* order is significant! */
60 { /* registers */
61 .start = UDC_BASE,
62 .end = UDC_BASE + 0xff,
63 .flags = IORESOURCE_MEM,
64 }, { /* general IRQ */
65 .start = INT_USB_IRQ_GEN,
66 .flags = IORESOURCE_IRQ,
67 }, { /* PIO IRQ */
68 .start = INT_USB_IRQ_NISO,
69 .flags = IORESOURCE_IRQ,
70 }, { /* SOF IRQ */
71 .start = INT_USB_IRQ_ISO,
72 .flags = IORESOURCE_IRQ,
73 },
74};
75
76static u64 udc_dmamask = ~(u32)0;
77
78static struct platform_device udc_device = {
79 .name = "omap_udc",
80 .id = -1,
81 .dev = {
82 .dma_mask = &udc_dmamask,
83 .coherent_dma_mask = 0xffffffff,
84 },
85 .num_resources = ARRAY_SIZE(udc_resources),
86 .resource = udc_resources,
87};
88
89static inline void udc_device_init(struct omap_usb_config *pdata)
90{
91 /* IRQ numbers for omap7xx */
92 if(cpu_is_omap7xx()) {
93 udc_resources[1].start = INT_7XX_USB_GENI;
94 udc_resources[2].start = INT_7XX_USB_NON_ISO;
95 udc_resources[3].start = INT_7XX_USB_ISO;
96 }
97 pdata->udc_device = &udc_device;
98}
99
100#else
101
102static inline void udc_device_init(struct omap_usb_config *pdata)
103{
104}
105
106#endif
107
108#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
109
110/* The dmamask must be set for OHCI to work */
111static u64 ohci_dmamask = ~(u32)0;
112
113static struct resource ohci_resources[] = {
114 {
115 .start = OMAP_OHCI_BASE,
116 .end = OMAP_OHCI_BASE + 0xff,
117 .flags = IORESOURCE_MEM,
118 },
119 {
120 .start = INT_USB_IRQ_HGEN,
121 .flags = IORESOURCE_IRQ,
122 },
123};
124
125static struct platform_device ohci_device = {
126 .name = "ohci",
127 .id = -1,
128 .dev = {
129 .dma_mask = &ohci_dmamask,
130 .coherent_dma_mask = 0xffffffff,
131 },
132 .num_resources = ARRAY_SIZE(ohci_resources),
133 .resource = ohci_resources,
134};
135
136static inline void ohci_device_init(struct omap_usb_config *pdata)
137{
138 if (cpu_is_omap7xx())
139 ohci_resources[1].start = INT_7XX_USB_HHC_1;
140 pdata->ohci_device = &ohci_device;
141}
142
143#else
144
145static inline void ohci_device_init(struct omap_usb_config *pdata)
146{
147}
148
149#endif
150
151#if defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG)
152
153static struct resource otg_resources[] = {
154 /* order is significant! */
155 {
156 .start = OTG_BASE,
157 .end = OTG_BASE + 0xff,
158 .flags = IORESOURCE_MEM,
159 }, {
160 .start = INT_USB_IRQ_OTG,
161 .flags = IORESOURCE_IRQ,
162 },
163};
164
165static struct platform_device otg_device = {
166 .name = "omap_otg",
167 .id = -1,
168 .num_resources = ARRAY_SIZE(otg_resources),
169 .resource = otg_resources,
170};
171
172static inline void otg_device_init(struct omap_usb_config *pdata)
173{
174 if (cpu_is_omap7xx())
175 otg_resources[1].start = INT_7XX_USB_OTG;
176 pdata->otg_device = &otg_device;
177}
178
179#else
180
181static inline void otg_device_init(struct omap_usb_config *pdata)
182{
183}
184
185#endif
186
187u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device)
188{
189 u32 syscon1 = 0;
190
191 if (nwires == 0) {
192 if (!cpu_is_omap15xx()) {
193 u32 l;
194
195 /* pulldown D+/D- */
196 l = omap_readl(USB_TRANSCEIVER_CTRL);
197 l &= ~(3 << 1);
198 omap_writel(l, USB_TRANSCEIVER_CTRL);
199 }
200 return 0;
201 }
202
203 if (is_device) {
204 if (cpu_is_omap7xx()) {
205 omap_cfg_reg(AA17_7XX_USB_DM);
206 omap_cfg_reg(W16_7XX_USB_PU_EN);
207 omap_cfg_reg(W17_7XX_USB_VBUSI);
208 omap_cfg_reg(W18_7XX_USB_DMCK_OUT);
209 omap_cfg_reg(W19_7XX_USB_DCRST);
210 } else
211 omap_cfg_reg(W4_USB_PUEN);
212 }
213
214 if (nwires == 2) {
215 u32 l;
216
217 // omap_cfg_reg(P9_USB_DP);
218 // omap_cfg_reg(R8_USB_DM);
219
220 if (cpu_is_omap15xx()) {
221 /* This works on 1510-Innovator */
222 return 0;
223 }
224
225 /* NOTES:
226 * - peripheral should configure VBUS detection!
227 * - only peripherals may use the internal D+/D- pulldowns
228 * - OTG support on this port not yet written
229 */
230
231 /* Don't do this for omap7xx -- it causes USB to not work correctly */
232 if (!cpu_is_omap7xx()) {
233 l = omap_readl(USB_TRANSCEIVER_CTRL);
234 l &= ~(7 << 4);
235 if (!is_device)
236 l |= (3 << 1);
237 omap_writel(l, USB_TRANSCEIVER_CTRL);
238 }
239
240 return 3 << 16;
241 }
242
243 /* alternate pin config, external transceiver */
244 if (cpu_is_omap15xx()) {
245 printk(KERN_ERR "no usb0 alt pin config on 15xx\n");
246 return 0;
247 }
248
249 omap_cfg_reg(V6_USB0_TXD);
250 omap_cfg_reg(W9_USB0_TXEN);
251 omap_cfg_reg(W5_USB0_SE0);
252 if (nwires != 3)
253 omap_cfg_reg(Y5_USB0_RCV);
254
255 /* NOTE: SPEED and SUSP aren't configured here. OTG hosts
256 * may be able to use I2C requests to set those bits along
257 * with VBUS switching and overcurrent detection.
258 */
259
260 if (nwires != 6) {
261 u32 l;
262
263 l = omap_readl(USB_TRANSCEIVER_CTRL);
264 l &= ~CONF_USB2_UNI_R;
265 omap_writel(l, USB_TRANSCEIVER_CTRL);
266 }
267
268 switch (nwires) {
269 case 3:
270 syscon1 = 2;
271 break;
272 case 4:
273 syscon1 = 1;
274 break;
275 case 6:
276 syscon1 = 3;
277 {
278 u32 l;
279
280 omap_cfg_reg(AA9_USB0_VP);
281 omap_cfg_reg(R9_USB0_VM);
282 l = omap_readl(USB_TRANSCEIVER_CTRL);
283 l |= CONF_USB2_UNI_R;
284 omap_writel(l, USB_TRANSCEIVER_CTRL);
285 }
286 break;
287 default:
288 printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
289 0, nwires);
290 }
291
292 return syscon1 << 16;
293}
294
295u32 __init omap1_usb1_init(unsigned nwires)
296{
297 u32 syscon1 = 0;
298
299 if (!cpu_is_omap15xx() && nwires != 6) {
300 u32 l;
301
302 l = omap_readl(USB_TRANSCEIVER_CTRL);
303 l &= ~CONF_USB1_UNI_R;
304 omap_writel(l, USB_TRANSCEIVER_CTRL);
305 }
306 if (nwires == 0)
307 return 0;
308
309 /* external transceiver */
310 omap_cfg_reg(USB1_TXD);
311 omap_cfg_reg(USB1_TXEN);
312 if (nwires != 3)
313 omap_cfg_reg(USB1_RCV);
314
315 if (cpu_is_omap15xx()) {
316 omap_cfg_reg(USB1_SEO);
317 omap_cfg_reg(USB1_SPEED);
318 // SUSP
319 } else if (cpu_is_omap1610() || cpu_is_omap5912()) {
320 omap_cfg_reg(W13_1610_USB1_SE0);
321 omap_cfg_reg(R13_1610_USB1_SPEED);
322 // SUSP
323 } else if (cpu_is_omap1710()) {
324 omap_cfg_reg(R13_1710_USB1_SE0);
325 // SUSP
326 } else {
327 pr_debug("usb%d cpu unrecognized\n", 1);
328 return 0;
329 }
330
331 switch (nwires) {
332 case 2:
333 goto bad;
334 case 3:
335 syscon1 = 2;
336 break;
337 case 4:
338 syscon1 = 1;
339 break;
340 case 6:
341 syscon1 = 3;
342 omap_cfg_reg(USB1_VP);
343 omap_cfg_reg(USB1_VM);
344 if (!cpu_is_omap15xx()) {
345 u32 l;
346
347 l = omap_readl(USB_TRANSCEIVER_CTRL);
348 l |= CONF_USB1_UNI_R;
349 omap_writel(l, USB_TRANSCEIVER_CTRL);
350 }
351 break;
352 default:
353bad:
354 printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
355 1, nwires);
356 }
357
358 return syscon1 << 20;
359}
360
361u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
362{
363 u32 syscon1 = 0;
364
365 /* NOTE omap1 erratum: must leave USB2_UNI_R set if usb0 in use */
366 if (alt_pingroup || nwires == 0)
367 return 0;
368
369 if (!cpu_is_omap15xx() && nwires != 6) {
370 u32 l;
371
372 l = omap_readl(USB_TRANSCEIVER_CTRL);
373 l &= ~CONF_USB2_UNI_R;
374 omap_writel(l, USB_TRANSCEIVER_CTRL);
375 }
376
377 /* external transceiver */
378 if (cpu_is_omap15xx()) {
379 omap_cfg_reg(USB2_TXD);
380 omap_cfg_reg(USB2_TXEN);
381 omap_cfg_reg(USB2_SEO);
382 if (nwires != 3)
383 omap_cfg_reg(USB2_RCV);
384 /* there is no USB2_SPEED */
385 } else if (cpu_is_omap16xx()) {
386 omap_cfg_reg(V6_USB2_TXD);
387 omap_cfg_reg(W9_USB2_TXEN);
388 omap_cfg_reg(W5_USB2_SE0);
389 if (nwires != 3)
390 omap_cfg_reg(Y5_USB2_RCV);
391 // FIXME omap_cfg_reg(USB2_SPEED);
392 } else {
393 pr_debug("usb%d cpu unrecognized\n", 1);
394 return 0;
395 }
396
397 // omap_cfg_reg(USB2_SUSP);
398
399 switch (nwires) {
400 case 2:
401 goto bad;
402 case 3:
403 syscon1 = 2;
404 break;
405 case 4:
406 syscon1 = 1;
407 break;
408 case 5:
409 goto bad;
410 case 6:
411 syscon1 = 3;
412 if (cpu_is_omap15xx()) {
413 omap_cfg_reg(USB2_VP);
414 omap_cfg_reg(USB2_VM);
415 } else {
416 u32 l;
417
418 omap_cfg_reg(AA9_USB2_VP);
419 omap_cfg_reg(R9_USB2_VM);
420 l = omap_readl(USB_TRANSCEIVER_CTRL);
421 l |= CONF_USB2_UNI_R;
422 omap_writel(l, USB_TRANSCEIVER_CTRL);
423 }
424 break;
425 default:
426bad:
427 printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
428 2, nwires);
429 }
430
431 return syscon1 << 24;
432}
433
434#ifdef CONFIG_ARCH_OMAP15XX
435
436/* ULPD_DPLL_CTRL */
437#define DPLL_IOB (1 << 13)
438#define DPLL_PLL_ENABLE (1 << 4)
439#define DPLL_LOCK (1 << 0)
440
441/* ULPD_APLL_CTRL */
442#define APLL_NDPLL_SWITCH (1 << 0)
443
444static void __init omap_1510_usb_init(struct omap_usb_config *config)
445{
446 unsigned int val;
447 u16 w;
448
449 config->usb0_init(config->pins[0], is_usb0_device(config));
450 config->usb1_init(config->pins[1]);
451 config->usb2_init(config->pins[2], 0);
452
453 val = omap_readl(MOD_CONF_CTRL_0) & ~(0x3f << 1);
454 val |= (config->hmc_mode << 1);
455 omap_writel(val, MOD_CONF_CTRL_0);
456
457 printk("USB: hmc %d", config->hmc_mode);
458 if (config->pins[0])
459 printk(", usb0 %d wires%s", config->pins[0],
460 is_usb0_device(config) ? " (dev)" : "");
461 if (config->pins[1])
462 printk(", usb1 %d wires", config->pins[1]);
463 if (config->pins[2])
464 printk(", usb2 %d wires", config->pins[2]);
465 printk("\n");
466
467 /* use DPLL for 48 MHz function clock */
468 pr_debug("APLL %04x DPLL %04x REQ %04x\n", omap_readw(ULPD_APLL_CTRL),
469 omap_readw(ULPD_DPLL_CTRL), omap_readw(ULPD_SOFT_REQ));
470
471 w = omap_readw(ULPD_APLL_CTRL);
472 w &= ~APLL_NDPLL_SWITCH;
473 omap_writew(w, ULPD_APLL_CTRL);
474
475 w = omap_readw(ULPD_DPLL_CTRL);
476 w |= DPLL_IOB | DPLL_PLL_ENABLE;
477 omap_writew(w, ULPD_DPLL_CTRL);
478
479 w = omap_readw(ULPD_SOFT_REQ);
480 w |= SOFT_UDC_REQ | SOFT_DPLL_REQ;
481 omap_writew(w, ULPD_SOFT_REQ);
482
483 while (!(omap_readw(ULPD_DPLL_CTRL) & DPLL_LOCK))
484 cpu_relax();
485
486#ifdef CONFIG_USB_GADGET_OMAP
487 if (config->register_dev) {
488 int status;
489
490 udc_device.dev.platform_data = config;
491 status = platform_device_register(&udc_device);
492 if (status)
493 pr_debug("can't register UDC device, %d\n", status);
494 /* udc driver gates 48MHz by D+ pullup */
495 }
496#endif
497
498#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
499 if (config->register_host) {
500 int status;
501
502 ohci_device.dev.platform_data = config;
503 status = platform_device_register(&ohci_device);
504 if (status)
505 pr_debug("can't register OHCI device, %d\n", status);
506 /* hcd explicitly gates 48MHz */
507 }
508#endif
509}
510
511#else
512static inline void omap_1510_usb_init(struct omap_usb_config *config) {}
513#endif
514
515void __init omap1_usb_init(struct omap_usb_config *pdata)
516{
517 pdata->usb0_init = omap1_usb0_init;
518 pdata->usb1_init = omap1_usb1_init;
519 pdata->usb2_init = omap1_usb2_init;
520 udc_device_init(pdata);
521 ohci_device_init(pdata);
522 otg_device_init(pdata);
523
524 if (cpu_is_omap7xx() || cpu_is_omap16xx())
525 omap_otg_init(pdata);
526 else if (cpu_is_omap15xx())
527 omap_1510_usb_init(pdata);
528 else
529 printk(KERN_ERR "USB: No init for your chip yet\n");
530}
1/*
2 * Platform level USB initialization for FS USB OTG controller on omap1 and 24xx
3 *
4 * Copyright (C) 2004 Texas Instruments, Inc.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
19 */
20
21#include <linux/module.h>
22#include <linux/kernel.h>
23#include <linux/init.h>
24#include <linux/platform_device.h>
25#include <linux/io.h>
26
27#include <asm/irq.h>
28
29#include <mach/mux.h>
30
31#include <mach/usb.h>
32
33#include "common.h"
34
35/* These routines should handle the standard chip-specific modes
36 * for usb0/1/2 ports, covering basic mux and transceiver setup.
37 *
38 * Some board-*.c files will need to set up additional mux options,
39 * like for suspend handling, vbus sensing, GPIOs, and the D+ pullup.
40 */
41
42/* TESTED ON:
43 * - 1611B H2 (with usb1 mini-AB) using standard Mini-B or OTG cables
44 * - 5912 OSK OHCI (with usb0 standard-A), standard A-to-B cables
45 * - 5912 OSK UDC, with *nonstandard* A-to-A cable
46 * - 1510 Innovator UDC with bundled usb0 cable
47 * - 1510 Innovator OHCI with bundled usb1/usb2 cable
48 * - 1510 Innovator OHCI with custom usb0 cable, feeding 5V VBUS
49 * - 1710 custom development board using alternate pin group
50 * - 1710 H3 (with usb1 mini-AB) using standard Mini-B or OTG cables
51 */
52
53#define INT_USB_IRQ_GEN IH2_BASE + 20
54#define INT_USB_IRQ_NISO IH2_BASE + 30
55#define INT_USB_IRQ_ISO IH2_BASE + 29
56#define INT_USB_IRQ_HGEN INT_USB_HHC_1
57#define INT_USB_IRQ_OTG IH2_BASE + 8
58
59#ifdef CONFIG_ARCH_OMAP_OTG
60
61void __init
62omap_otg_init(struct omap_usb_config *config)
63{
64 u32 syscon;
65 int alt_pingroup = 0;
66
67 /* NOTE: no bus or clock setup (yet?) */
68
69 syscon = omap_readl(OTG_SYSCON_1) & 0xffff;
70 if (!(syscon & OTG_RESET_DONE))
71 pr_debug("USB resets not complete?\n");
72
73 //omap_writew(0, OTG_IRQ_EN);
74
75 /* pin muxing and transceiver pinouts */
76 if (config->pins[0] > 2) /* alt pingroup 2 */
77 alt_pingroup = 1;
78 syscon |= config->usb0_init(config->pins[0], is_usb0_device(config));
79 syscon |= config->usb1_init(config->pins[1]);
80 syscon |= config->usb2_init(config->pins[2], alt_pingroup);
81 pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
82 omap_writel(syscon, OTG_SYSCON_1);
83
84 syscon = config->hmc_mode;
85 syscon |= USBX_SYNCHRO | (4 << 16) /* B_ASE0_BRST */;
86#ifdef CONFIG_USB_OTG
87 if (config->otg)
88 syscon |= OTG_EN;
89#endif
90 if (cpu_class_is_omap1())
91 pr_debug("USB_TRANSCEIVER_CTRL = %03x\n",
92 omap_readl(USB_TRANSCEIVER_CTRL));
93 pr_debug("OTG_SYSCON_2 = %08x\n", omap_readl(OTG_SYSCON_2));
94 omap_writel(syscon, OTG_SYSCON_2);
95
96 printk("USB: hmc %d", config->hmc_mode);
97 if (!alt_pingroup)
98 printk(", usb2 alt %d wires", config->pins[2]);
99 else if (config->pins[0])
100 printk(", usb0 %d wires%s", config->pins[0],
101 is_usb0_device(config) ? " (dev)" : "");
102 if (config->pins[1])
103 printk(", usb1 %d wires", config->pins[1]);
104 if (!alt_pingroup && config->pins[2])
105 printk(", usb2 %d wires", config->pins[2]);
106 if (config->otg)
107 printk(", Mini-AB on usb%d", config->otg - 1);
108 printk("\n");
109
110 if (cpu_class_is_omap1()) {
111 u16 w;
112
113 /* leave USB clocks/controllers off until needed */
114 w = omap_readw(ULPD_SOFT_REQ);
115 w &= ~SOFT_USB_CLK_REQ;
116 omap_writew(w, ULPD_SOFT_REQ);
117
118 w = omap_readw(ULPD_CLOCK_CTRL);
119 w &= ~USB_MCLK_EN;
120 w |= DIS_USB_PVCI_CLK;
121 omap_writew(w, ULPD_CLOCK_CTRL);
122 }
123 syscon = omap_readl(OTG_SYSCON_1);
124 syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN;
125
126#if IS_ENABLED(CONFIG_USB_OMAP)
127 if (config->otg || config->register_dev) {
128 struct platform_device *udc_device = config->udc_device;
129 int status;
130
131 syscon &= ~DEV_IDLE_EN;
132 udc_device->dev.platform_data = config;
133 status = platform_device_register(udc_device);
134 if (status)
135 pr_debug("can't register UDC device, %d\n", status);
136 }
137#endif
138
139#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
140 if (config->otg || config->register_host) {
141 struct platform_device *ohci_device = config->ohci_device;
142 int status;
143
144 syscon &= ~HST_IDLE_EN;
145 ohci_device->dev.platform_data = config;
146 status = platform_device_register(ohci_device);
147 if (status)
148 pr_debug("can't register OHCI device, %d\n", status);
149 }
150#endif
151
152#ifdef CONFIG_USB_OTG
153 if (config->otg) {
154 struct platform_device *otg_device = config->otg_device;
155 int status;
156
157 syscon &= ~OTG_IDLE_EN;
158 otg_device->dev.platform_data = config;
159 status = platform_device_register(otg_device);
160 if (status)
161 pr_debug("can't register OTG device, %d\n", status);
162 }
163#endif
164 pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
165 omap_writel(syscon, OTG_SYSCON_1);
166}
167
168#else
169void omap_otg_init(struct omap_usb_config *config) {}
170#endif
171
172#if IS_ENABLED(CONFIG_USB_OMAP)
173
174static struct resource udc_resources[] = {
175 /* order is significant! */
176 { /* registers */
177 .start = UDC_BASE,
178 .end = UDC_BASE + 0xff,
179 .flags = IORESOURCE_MEM,
180 }, { /* general IRQ */
181 .start = INT_USB_IRQ_GEN,
182 .flags = IORESOURCE_IRQ,
183 }, { /* PIO IRQ */
184 .start = INT_USB_IRQ_NISO,
185 .flags = IORESOURCE_IRQ,
186 }, { /* SOF IRQ */
187 .start = INT_USB_IRQ_ISO,
188 .flags = IORESOURCE_IRQ,
189 },
190};
191
192static u64 udc_dmamask = ~(u32)0;
193
194static struct platform_device udc_device = {
195 .name = "omap_udc",
196 .id = -1,
197 .dev = {
198 .dma_mask = &udc_dmamask,
199 .coherent_dma_mask = 0xffffffff,
200 },
201 .num_resources = ARRAY_SIZE(udc_resources),
202 .resource = udc_resources,
203};
204
205static inline void udc_device_init(struct omap_usb_config *pdata)
206{
207 /* IRQ numbers for omap7xx */
208 if(cpu_is_omap7xx()) {
209 udc_resources[1].start = INT_7XX_USB_GENI;
210 udc_resources[2].start = INT_7XX_USB_NON_ISO;
211 udc_resources[3].start = INT_7XX_USB_ISO;
212 }
213 pdata->udc_device = &udc_device;
214}
215
216#else
217
218static inline void udc_device_init(struct omap_usb_config *pdata)
219{
220}
221
222#endif
223
224#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
225
226/* The dmamask must be set for OHCI to work */
227static u64 ohci_dmamask = ~(u32)0;
228
229static struct resource ohci_resources[] = {
230 {
231 .start = OMAP_OHCI_BASE,
232 .end = OMAP_OHCI_BASE + 0xff,
233 .flags = IORESOURCE_MEM,
234 },
235 {
236 .start = INT_USB_IRQ_HGEN,
237 .flags = IORESOURCE_IRQ,
238 },
239};
240
241static struct platform_device ohci_device = {
242 .name = "ohci",
243 .id = -1,
244 .dev = {
245 .dma_mask = &ohci_dmamask,
246 .coherent_dma_mask = 0xffffffff,
247 },
248 .num_resources = ARRAY_SIZE(ohci_resources),
249 .resource = ohci_resources,
250};
251
252static inline void ohci_device_init(struct omap_usb_config *pdata)
253{
254 if (cpu_is_omap7xx())
255 ohci_resources[1].start = INT_7XX_USB_HHC_1;
256 pdata->ohci_device = &ohci_device;
257 pdata->ocpi_enable = &ocpi_enable;
258}
259
260#else
261
262static inline void ohci_device_init(struct omap_usb_config *pdata)
263{
264}
265
266#endif
267
268#if defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG)
269
270static struct resource otg_resources[] = {
271 /* order is significant! */
272 {
273 .start = OTG_BASE,
274 .end = OTG_BASE + 0xff,
275 .flags = IORESOURCE_MEM,
276 }, {
277 .start = INT_USB_IRQ_OTG,
278 .flags = IORESOURCE_IRQ,
279 },
280};
281
282static struct platform_device otg_device = {
283 .name = "omap_otg",
284 .id = -1,
285 .num_resources = ARRAY_SIZE(otg_resources),
286 .resource = otg_resources,
287};
288
289static inline void otg_device_init(struct omap_usb_config *pdata)
290{
291 if (cpu_is_omap7xx())
292 otg_resources[1].start = INT_7XX_USB_OTG;
293 pdata->otg_device = &otg_device;
294}
295
296#else
297
298static inline void otg_device_init(struct omap_usb_config *pdata)
299{
300}
301
302#endif
303
304static u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device)
305{
306 u32 syscon1 = 0;
307
308 if (nwires == 0) {
309 if (!cpu_is_omap15xx()) {
310 u32 l;
311
312 /* pulldown D+/D- */
313 l = omap_readl(USB_TRANSCEIVER_CTRL);
314 l &= ~(3 << 1);
315 omap_writel(l, USB_TRANSCEIVER_CTRL);
316 }
317 return 0;
318 }
319
320 if (is_device) {
321 if (cpu_is_omap7xx()) {
322 omap_cfg_reg(AA17_7XX_USB_DM);
323 omap_cfg_reg(W16_7XX_USB_PU_EN);
324 omap_cfg_reg(W17_7XX_USB_VBUSI);
325 omap_cfg_reg(W18_7XX_USB_DMCK_OUT);
326 omap_cfg_reg(W19_7XX_USB_DCRST);
327 } else
328 omap_cfg_reg(W4_USB_PUEN);
329 }
330
331 if (nwires == 2) {
332 u32 l;
333
334 // omap_cfg_reg(P9_USB_DP);
335 // omap_cfg_reg(R8_USB_DM);
336
337 if (cpu_is_omap15xx()) {
338 /* This works on 1510-Innovator */
339 return 0;
340 }
341
342 /* NOTES:
343 * - peripheral should configure VBUS detection!
344 * - only peripherals may use the internal D+/D- pulldowns
345 * - OTG support on this port not yet written
346 */
347
348 /* Don't do this for omap7xx -- it causes USB to not work correctly */
349 if (!cpu_is_omap7xx()) {
350 l = omap_readl(USB_TRANSCEIVER_CTRL);
351 l &= ~(7 << 4);
352 if (!is_device)
353 l |= (3 << 1);
354 omap_writel(l, USB_TRANSCEIVER_CTRL);
355 }
356
357 return 3 << 16;
358 }
359
360 /* alternate pin config, external transceiver */
361 if (cpu_is_omap15xx()) {
362 printk(KERN_ERR "no usb0 alt pin config on 15xx\n");
363 return 0;
364 }
365
366 omap_cfg_reg(V6_USB0_TXD);
367 omap_cfg_reg(W9_USB0_TXEN);
368 omap_cfg_reg(W5_USB0_SE0);
369 if (nwires != 3)
370 omap_cfg_reg(Y5_USB0_RCV);
371
372 /* NOTE: SPEED and SUSP aren't configured here. OTG hosts
373 * may be able to use I2C requests to set those bits along
374 * with VBUS switching and overcurrent detection.
375 */
376
377 if (nwires != 6) {
378 u32 l;
379
380 l = omap_readl(USB_TRANSCEIVER_CTRL);
381 l &= ~CONF_USB2_UNI_R;
382 omap_writel(l, USB_TRANSCEIVER_CTRL);
383 }
384
385 switch (nwires) {
386 case 3:
387 syscon1 = 2;
388 break;
389 case 4:
390 syscon1 = 1;
391 break;
392 case 6:
393 syscon1 = 3;
394 {
395 u32 l;
396
397 omap_cfg_reg(AA9_USB0_VP);
398 omap_cfg_reg(R9_USB0_VM);
399 l = omap_readl(USB_TRANSCEIVER_CTRL);
400 l |= CONF_USB2_UNI_R;
401 omap_writel(l, USB_TRANSCEIVER_CTRL);
402 }
403 break;
404 default:
405 printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
406 0, nwires);
407 }
408
409 return syscon1 << 16;
410}
411
412static u32 __init omap1_usb1_init(unsigned nwires)
413{
414 u32 syscon1 = 0;
415
416 if (!cpu_is_omap15xx() && nwires != 6) {
417 u32 l;
418
419 l = omap_readl(USB_TRANSCEIVER_CTRL);
420 l &= ~CONF_USB1_UNI_R;
421 omap_writel(l, USB_TRANSCEIVER_CTRL);
422 }
423 if (nwires == 0)
424 return 0;
425
426 /* external transceiver */
427 omap_cfg_reg(USB1_TXD);
428 omap_cfg_reg(USB1_TXEN);
429 if (nwires != 3)
430 omap_cfg_reg(USB1_RCV);
431
432 if (cpu_is_omap15xx()) {
433 omap_cfg_reg(USB1_SEO);
434 omap_cfg_reg(USB1_SPEED);
435 // SUSP
436 } else if (cpu_is_omap1610() || cpu_is_omap5912()) {
437 omap_cfg_reg(W13_1610_USB1_SE0);
438 omap_cfg_reg(R13_1610_USB1_SPEED);
439 // SUSP
440 } else if (cpu_is_omap1710()) {
441 omap_cfg_reg(R13_1710_USB1_SE0);
442 // SUSP
443 } else {
444 pr_debug("usb%d cpu unrecognized\n", 1);
445 return 0;
446 }
447
448 switch (nwires) {
449 case 2:
450 goto bad;
451 case 3:
452 syscon1 = 2;
453 break;
454 case 4:
455 syscon1 = 1;
456 break;
457 case 6:
458 syscon1 = 3;
459 omap_cfg_reg(USB1_VP);
460 omap_cfg_reg(USB1_VM);
461 if (!cpu_is_omap15xx()) {
462 u32 l;
463
464 l = omap_readl(USB_TRANSCEIVER_CTRL);
465 l |= CONF_USB1_UNI_R;
466 omap_writel(l, USB_TRANSCEIVER_CTRL);
467 }
468 break;
469 default:
470bad:
471 printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
472 1, nwires);
473 }
474
475 return syscon1 << 20;
476}
477
478static u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
479{
480 u32 syscon1 = 0;
481
482 /* NOTE omap1 erratum: must leave USB2_UNI_R set if usb0 in use */
483 if (alt_pingroup || nwires == 0)
484 return 0;
485
486 if (!cpu_is_omap15xx() && nwires != 6) {
487 u32 l;
488
489 l = omap_readl(USB_TRANSCEIVER_CTRL);
490 l &= ~CONF_USB2_UNI_R;
491 omap_writel(l, USB_TRANSCEIVER_CTRL);
492 }
493
494 /* external transceiver */
495 if (cpu_is_omap15xx()) {
496 omap_cfg_reg(USB2_TXD);
497 omap_cfg_reg(USB2_TXEN);
498 omap_cfg_reg(USB2_SEO);
499 if (nwires != 3)
500 omap_cfg_reg(USB2_RCV);
501 /* there is no USB2_SPEED */
502 } else if (cpu_is_omap16xx()) {
503 omap_cfg_reg(V6_USB2_TXD);
504 omap_cfg_reg(W9_USB2_TXEN);
505 omap_cfg_reg(W5_USB2_SE0);
506 if (nwires != 3)
507 omap_cfg_reg(Y5_USB2_RCV);
508 // FIXME omap_cfg_reg(USB2_SPEED);
509 } else {
510 pr_debug("usb%d cpu unrecognized\n", 1);
511 return 0;
512 }
513
514 // omap_cfg_reg(USB2_SUSP);
515
516 switch (nwires) {
517 case 2:
518 goto bad;
519 case 3:
520 syscon1 = 2;
521 break;
522 case 4:
523 syscon1 = 1;
524 break;
525 case 5:
526 goto bad;
527 case 6:
528 syscon1 = 3;
529 if (cpu_is_omap15xx()) {
530 omap_cfg_reg(USB2_VP);
531 omap_cfg_reg(USB2_VM);
532 } else {
533 u32 l;
534
535 omap_cfg_reg(AA9_USB2_VP);
536 omap_cfg_reg(R9_USB2_VM);
537 l = omap_readl(USB_TRANSCEIVER_CTRL);
538 l |= CONF_USB2_UNI_R;
539 omap_writel(l, USB_TRANSCEIVER_CTRL);
540 }
541 break;
542 default:
543bad:
544 printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
545 2, nwires);
546 }
547
548 return syscon1 << 24;
549}
550
551#ifdef CONFIG_ARCH_OMAP15XX
552
553/* ULPD_DPLL_CTRL */
554#define DPLL_IOB (1 << 13)
555#define DPLL_PLL_ENABLE (1 << 4)
556#define DPLL_LOCK (1 << 0)
557
558/* ULPD_APLL_CTRL */
559#define APLL_NDPLL_SWITCH (1 << 0)
560
561static void __init omap_1510_usb_init(struct omap_usb_config *config)
562{
563 unsigned int val;
564 u16 w;
565
566 config->usb0_init(config->pins[0], is_usb0_device(config));
567 config->usb1_init(config->pins[1]);
568 config->usb2_init(config->pins[2], 0);
569
570 val = omap_readl(MOD_CONF_CTRL_0) & ~(0x3f << 1);
571 val |= (config->hmc_mode << 1);
572 omap_writel(val, MOD_CONF_CTRL_0);
573
574 printk("USB: hmc %d", config->hmc_mode);
575 if (config->pins[0])
576 printk(", usb0 %d wires%s", config->pins[0],
577 is_usb0_device(config) ? " (dev)" : "");
578 if (config->pins[1])
579 printk(", usb1 %d wires", config->pins[1]);
580 if (config->pins[2])
581 printk(", usb2 %d wires", config->pins[2]);
582 printk("\n");
583
584 /* use DPLL for 48 MHz function clock */
585 pr_debug("APLL %04x DPLL %04x REQ %04x\n", omap_readw(ULPD_APLL_CTRL),
586 omap_readw(ULPD_DPLL_CTRL), omap_readw(ULPD_SOFT_REQ));
587
588 w = omap_readw(ULPD_APLL_CTRL);
589 w &= ~APLL_NDPLL_SWITCH;
590 omap_writew(w, ULPD_APLL_CTRL);
591
592 w = omap_readw(ULPD_DPLL_CTRL);
593 w |= DPLL_IOB | DPLL_PLL_ENABLE;
594 omap_writew(w, ULPD_DPLL_CTRL);
595
596 w = omap_readw(ULPD_SOFT_REQ);
597 w |= SOFT_UDC_REQ | SOFT_DPLL_REQ;
598 omap_writew(w, ULPD_SOFT_REQ);
599
600 while (!(omap_readw(ULPD_DPLL_CTRL) & DPLL_LOCK))
601 cpu_relax();
602
603#if IS_ENABLED(CONFIG_USB_OMAP)
604 if (config->register_dev) {
605 int status;
606
607 udc_device.dev.platform_data = config;
608 status = platform_device_register(&udc_device);
609 if (status)
610 pr_debug("can't register UDC device, %d\n", status);
611 /* udc driver gates 48MHz by D+ pullup */
612 }
613#endif
614
615#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
616 if (config->register_host) {
617 int status;
618
619 ohci_device.dev.platform_data = config;
620 status = platform_device_register(&ohci_device);
621 if (status)
622 pr_debug("can't register OHCI device, %d\n", status);
623 /* hcd explicitly gates 48MHz */
624 }
625#endif
626}
627
628#else
629static inline void omap_1510_usb_init(struct omap_usb_config *config) {}
630#endif
631
632void __init omap1_usb_init(struct omap_usb_config *_pdata)
633{
634 struct omap_usb_config *pdata;
635
636 pdata = kmemdup(_pdata, sizeof(*pdata), GFP_KERNEL);
637 if (!pdata)
638 return;
639
640 pdata->usb0_init = omap1_usb0_init;
641 pdata->usb1_init = omap1_usb1_init;
642 pdata->usb2_init = omap1_usb2_init;
643 udc_device_init(pdata);
644 ohci_device_init(pdata);
645 otg_device_init(pdata);
646
647 if (cpu_is_omap7xx() || cpu_is_omap16xx())
648 omap_otg_init(pdata);
649 else if (cpu_is_omap15xx())
650 omap_1510_usb_init(pdata);
651 else
652 printk(KERN_ERR "USB: No init for your chip yet\n");
653}