Loading...
1/*
2 * Driver for loading USB isight firmware
3 *
4 * Copyright (C) 2008 Matthew Garrett <mjg@redhat.com>
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the Free
8 * Software Foundation, version 2.
9 *
10 * The USB isight cameras in recent Apples are roughly compatible with the USB
11 * video class specification, and can be driven by uvcvideo. However, they
12 * need firmware to be loaded beforehand. After firmware loading, the device
13 * detaches from the USB bus and reattaches with a new device ID. It can then
14 * be claimed by the uvc driver.
15 *
16 * The firmware is non-free and must be extracted by the user. Tools to do this
17 * are available at http://bersace03.free.fr/ift/
18 *
19 * The isight firmware loading was reverse engineered by Johannes Berg
20 * <johannes@sipsolutions.de>, and this driver is based on code by Ronald
21 * Bultje <rbultje@ronald.bitfreak.net>
22 */
23
24#include <linux/usb.h>
25#include <linux/firmware.h>
26#include <linux/errno.h>
27#include <linux/module.h>
28#include <linux/slab.h>
29
30static const struct usb_device_id id_table[] = {
31 {USB_DEVICE(0x05ac, 0x8300)},
32 {},
33};
34
35MODULE_DEVICE_TABLE(usb, id_table);
36
37static int isight_firmware_load(struct usb_interface *intf,
38 const struct usb_device_id *id)
39{
40 struct usb_device *dev = interface_to_usbdev(intf);
41 int llen, len, req, ret = 0;
42 const struct firmware *firmware;
43 unsigned char *buf = kmalloc(50, GFP_KERNEL);
44 unsigned char data[4];
45 const u8 *ptr;
46
47 if (!buf)
48 return -ENOMEM;
49
50 if (request_firmware(&firmware, "isight.fw", &dev->dev) != 0) {
51 printk(KERN_ERR "Unable to load isight firmware\n");
52 ret = -ENODEV;
53 goto out;
54 }
55
56 ptr = firmware->data;
57
58 if (usb_control_msg
59 (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, "\1", 1,
60 300) != 1) {
61 printk(KERN_ERR
62 "Failed to initialise isight firmware loader\n");
63 ret = -ENODEV;
64 goto out;
65 }
66
67 while (ptr+4 <= firmware->data+firmware->size) {
68 memcpy(data, ptr, 4);
69 len = (data[0] << 8 | data[1]);
70 req = (data[2] << 8 | data[3]);
71 ptr += 4;
72
73 if (len == 0x8001)
74 break; /* success */
75 else if (len == 0)
76 continue;
77
78 for (; len > 0; req += 50) {
79 llen = min(len, 50);
80 len -= llen;
81 if (ptr+llen > firmware->data+firmware->size) {
82 printk(KERN_ERR
83 "Malformed isight firmware");
84 ret = -ENODEV;
85 goto out;
86 }
87 memcpy(buf, ptr, llen);
88
89 ptr += llen;
90
91 if (usb_control_msg
92 (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, req, 0,
93 buf, llen, 300) != llen) {
94 printk(KERN_ERR
95 "Failed to load isight firmware\n");
96 ret = -ENODEV;
97 goto out;
98 }
99
100 }
101 }
102
103 if (usb_control_msg
104 (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, "\0", 1,
105 300) != 1) {
106 printk(KERN_ERR "isight firmware loading completion failed\n");
107 ret = -ENODEV;
108 }
109
110out:
111 kfree(buf);
112 release_firmware(firmware);
113 return ret;
114}
115
116MODULE_FIRMWARE("isight.fw");
117
118static void isight_firmware_disconnect(struct usb_interface *intf)
119{
120}
121
122static struct usb_driver isight_firmware_driver = {
123 .name = "isight_firmware",
124 .probe = isight_firmware_load,
125 .disconnect = isight_firmware_disconnect,
126 .id_table = id_table,
127};
128
129static int __init isight_firmware_init(void)
130{
131 return usb_register(&isight_firmware_driver);
132}
133
134static void __exit isight_firmware_exit(void)
135{
136 usb_deregister(&isight_firmware_driver);
137}
138
139module_init(isight_firmware_init);
140module_exit(isight_firmware_exit);
141
142MODULE_LICENSE("GPL");
143MODULE_AUTHOR("Matthew Garrett <mjg@redhat.com>");
1/*
2 * Driver for loading USB isight firmware
3 *
4 * Copyright (C) 2008 Matthew Garrett <mjg@redhat.com>
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the Free
8 * Software Foundation, version 2.
9 *
10 * The USB isight cameras in recent Apples are roughly compatible with the USB
11 * video class specification, and can be driven by uvcvideo. However, they
12 * need firmware to be loaded beforehand. After firmware loading, the device
13 * detaches from the USB bus and reattaches with a new device ID. It can then
14 * be claimed by the uvc driver.
15 *
16 * The firmware is non-free and must be extracted by the user. Tools to do this
17 * are available at http://bersace03.free.fr/ift/
18 *
19 * The isight firmware loading was reverse engineered by Johannes Berg
20 * <johannes@sipsolutions.de>, and this driver is based on code by Ronald
21 * Bultje <rbultje@ronald.bitfreak.net>
22 */
23
24#include <linux/usb.h>
25#include <linux/firmware.h>
26#include <linux/errno.h>
27#include <linux/module.h>
28#include <linux/slab.h>
29
30static const struct usb_device_id id_table[] = {
31 {USB_DEVICE(0x05ac, 0x8300)},
32 {},
33};
34
35MODULE_DEVICE_TABLE(usb, id_table);
36
37static int isight_firmware_load(struct usb_interface *intf,
38 const struct usb_device_id *id)
39{
40 struct usb_device *dev = interface_to_usbdev(intf);
41 int llen, len, req, ret = 0;
42 const struct firmware *firmware;
43 unsigned char *buf = kmalloc(50, GFP_KERNEL);
44 unsigned char data[4];
45 const u8 *ptr;
46
47 if (!buf)
48 return -ENOMEM;
49
50 if (request_firmware(&firmware, "isight.fw", &dev->dev) != 0) {
51 printk(KERN_ERR "Unable to load isight firmware\n");
52 ret = -ENODEV;
53 goto out;
54 }
55
56 ptr = firmware->data;
57
58 buf[0] = 0x01;
59 if (usb_control_msg
60 (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, buf, 1,
61 300) != 1) {
62 printk(KERN_ERR
63 "Failed to initialise isight firmware loader\n");
64 ret = -ENODEV;
65 goto out;
66 }
67
68 while (ptr+4 <= firmware->data+firmware->size) {
69 memcpy(data, ptr, 4);
70 len = (data[0] << 8 | data[1]);
71 req = (data[2] << 8 | data[3]);
72 ptr += 4;
73
74 if (len == 0x8001)
75 break; /* success */
76 else if (len == 0)
77 continue;
78
79 for (; len > 0; req += 50) {
80 llen = min(len, 50);
81 len -= llen;
82 if (ptr+llen > firmware->data+firmware->size) {
83 printk(KERN_ERR
84 "Malformed isight firmware");
85 ret = -ENODEV;
86 goto out;
87 }
88 memcpy(buf, ptr, llen);
89
90 ptr += llen;
91
92 if (usb_control_msg
93 (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, req, 0,
94 buf, llen, 300) != llen) {
95 printk(KERN_ERR
96 "Failed to load isight firmware\n");
97 ret = -ENODEV;
98 goto out;
99 }
100
101 }
102 }
103
104 buf[0] = 0x00;
105 if (usb_control_msg
106 (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, buf, 1,
107 300) != 1) {
108 printk(KERN_ERR "isight firmware loading completion failed\n");
109 ret = -ENODEV;
110 }
111
112out:
113 kfree(buf);
114 release_firmware(firmware);
115 return ret;
116}
117
118MODULE_FIRMWARE("isight.fw");
119
120static void isight_firmware_disconnect(struct usb_interface *intf)
121{
122}
123
124static struct usb_driver isight_firmware_driver = {
125 .name = "isight_firmware",
126 .probe = isight_firmware_load,
127 .disconnect = isight_firmware_disconnect,
128 .id_table = id_table,
129};
130
131module_usb_driver(isight_firmware_driver);
132
133MODULE_LICENSE("GPL");
134MODULE_AUTHOR("Matthew Garrett <mjg@redhat.com>");