Loading...
1#
2# PCCARD (PCMCIA/CardBus) bus subsystem configuration
3#
4
5menuconfig PCCARD
6 tristate "PCCard (PCMCIA/CardBus) support"
7 depends on HOTPLUG
8 ---help---
9 Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
10 computer. These are credit-card size devices such as network cards,
11 modems or hard drives often used with laptops computers. There are
12 actually two varieties of these cards: 16 bit PCMCIA and 32 bit
13 CardBus cards.
14
15 To compile this driver as modules, choose M here: the
16 module will be called pcmcia_core.
17
18if PCCARD
19
20config PCMCIA
21 tristate "16-bit PCMCIA support"
22 select CRC32
23 default y
24 ---help---
25 This option enables support for 16-bit PCMCIA cards. Most older
26 PC-cards are such 16-bit PCMCIA cards, so unless you know you're
27 only using 32-bit CardBus cards, say Y or M here.
28
29 To use 16-bit PCMCIA cards, you will need supporting software in
30 most cases. (see the file <file:Documentation/Changes> for
31 location and details).
32
33 To compile this driver as modules, choose M here: the
34 module will be called pcmcia.
35
36 If unsure, say Y.
37
38config PCMCIA_LOAD_CIS
39 bool "Load CIS updates from userspace (EXPERIMENTAL)"
40 depends on PCMCIA && EXPERIMENTAL
41 select FW_LOADER
42 default y
43 help
44 Some PCMCIA cards require an updated Card Information Structure (CIS)
45 to be loaded from userspace to work correctly. If you say Y here,
46 and your userspace is arranged correctly, this will be loaded
47 automatically using the in-kernel firmware loader and the hotplug
48 subsystem, instead of relying on cardmgr from pcmcia-cs to do so.
49
50 If unsure, say Y.
51
52config CARDBUS
53 bool "32-bit CardBus support"
54 depends on PCI
55 default y
56 ---help---
57 CardBus is a bus mastering architecture for PC-cards, which allows
58 for 32 bit PC-cards (the original PCMCIA standard specifies only
59 a 16 bit wide bus). Many newer PC-cards are actually CardBus cards.
60
61 To use 32 bit PC-cards, you also need a CardBus compatible host
62 bridge. Virtually all modern PCMCIA bridges do this, and most of
63 them are "yenta-compatible", so say Y or M there, too.
64
65 If unsure, say Y.
66
67comment "PC-card bridges"
68
69config YENTA
70 tristate "CardBus yenta-compatible bridge support"
71 depends on PCI
72 select CARDBUS if !EXPERT
73 select PCCARD_NONSTATIC if PCMCIA != n
74 ---help---
75 This option enables support for CardBus host bridges. Virtually
76 all modern PCMCIA bridges are CardBus compatible. A "bridge" is
77 the hardware inside your computer that PCMCIA cards are plugged
78 into.
79
80 To compile this driver as modules, choose M here: the
81 module will be called yenta_socket.
82
83 If unsure, say Y.
84
85config YENTA_O2
86 default y
87 bool "Special initialization for O2Micro bridges" if EXPERT
88 depends on YENTA
89
90config YENTA_RICOH
91 default y
92 bool "Special initialization for Ricoh bridges" if EXPERT
93 depends on YENTA
94
95config YENTA_TI
96 default y
97 bool "Special initialization for TI and EnE bridges" if EXPERT
98 depends on YENTA
99
100config YENTA_ENE_TUNE
101 default y
102 bool "Auto-tune EnE bridges for CB cards" if EXPERT
103 depends on YENTA_TI && CARDBUS
104
105config YENTA_TOSHIBA
106 default y
107 bool "Special initialization for Toshiba ToPIC bridges" if EXPERT
108 depends on YENTA
109
110config PD6729
111 tristate "Cirrus PD6729 compatible bridge support"
112 depends on PCMCIA && PCI
113 select PCCARD_NONSTATIC
114 help
115 This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge
116 device, found in some older laptops and PCMCIA card readers.
117
118config I82092
119 tristate "i82092 compatible bridge support"
120 depends on PCMCIA && PCI
121 select PCCARD_NONSTATIC
122 help
123 This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device,
124 found in some older laptops and more commonly in evaluation boards for the
125 chip.
126
127config I82365
128 tristate "i82365 compatible bridge support"
129 depends on PCMCIA && ISA
130 select PCCARD_NONSTATIC
131 help
132 Say Y here to include support for ISA-bus PCMCIA host bridges that
133 are register compatible with the Intel i82365. These are found on
134 older laptops and ISA-bus card readers for desktop systems. A
135 "bridge" is the hardware inside your computer that PCMCIA cards are
136 plugged into. If unsure, say N.
137
138config TCIC
139 tristate "Databook TCIC host bridge support"
140 depends on PCMCIA && ISA
141 select PCCARD_NONSTATIC
142 help
143 Say Y here to include support for the Databook TCIC family of PCMCIA
144 host bridges. These are only found on a handful of old systems.
145 "Bridge" is the name used for the hardware inside your computer that
146 PCMCIA cards are plugged into. If unsure, say N.
147
148config PCMCIA_M8XX
149 tristate "MPC8xx PCMCIA support"
150 depends on PCCARD && PPC && 8xx
151 select PCCARD_IODYN if PCMCIA != n
152 help
153 Say Y here to include support for PowerPC 8xx series PCMCIA
154 controller.
155
156 This driver is also available as a module called m8xx_pcmcia.
157
158config PCMCIA_AU1X00
159 tristate "Au1x00 pcmcia support"
160 depends on MIPS_ALCHEMY && PCMCIA
161
162config PCMCIA_ALCHEMY_DEVBOARD
163 tristate "Alchemy Db/Pb1xxx PCMCIA socket services"
164 depends on MIPS_ALCHEMY && PCMCIA
165 select 64BIT_PHYS_ADDR
166 help
167 Enable this driver of you want PCMCIA support on your Alchemy
168 Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200 board.
169 NOT suitable for the PB1000!
170
171 This driver is also available as a module called db1xxx_ss.ko
172
173config PCMCIA_XXS1500
174 tristate "MyCable XXS1500 PCMCIA socket support"
175 depends on PCMCIA && MIPS_XXS1500
176 select 64BIT_PHYS_ADDR
177 help
178 Support for the PCMCIA/CF socket interface on MyCable XXS1500
179 systems.
180
181 This driver is also available as a module called xxs1500_ss.ko
182
183config PCMCIA_BCM63XX
184 tristate "bcm63xx pcmcia support"
185 depends on BCM63XX && PCMCIA
186
187config PCMCIA_SOC_COMMON
188 tristate
189
190config PCMCIA_SA1100
191 tristate "SA1100 support"
192 depends on ARM && ARCH_SA1100 && PCMCIA
193 select PCMCIA_SOC_COMMON
194 help
195 Say Y here to include support for SA11x0-based PCMCIA or CF
196 sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/
197 Xscale(R) embedded machines.
198
199 This driver is also available as a module called sa1100_cs.
200
201config PCMCIA_SA1111
202 tristate "SA1111 support"
203 depends on ARM && ARCH_SA1100 && SA1111 && PCMCIA
204 select PCMCIA_SOC_COMMON
205 help
206 Say Y here to include support for SA1111-based PCMCIA or CF
207 sockets, found on the Jornada 720, Graphicsmaster and other
208 StrongARM(R)/Xscale(R) embedded machines.
209
210 This driver is also available as a module called sa1111_cs.
211
212config PCMCIA_PXA2XX
213 tristate "PXA2xx support"
214 depends on ARM && ARCH_PXA && PCMCIA
215 depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
216 || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
217 || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \
218 || MACH_VPAC270 || MACH_BALLOON3 || MACH_COLIBRI \
219 || MACH_COLIBRI320)
220 select PCMCIA_SOC_COMMON
221 help
222 Say Y here to include support for the PXA2xx PCMCIA controller
223
224config PCMCIA_DEBUG
225 bool "Enable debugging"
226 depends on (PCMCIA_SA1111 || PCMCIA_SA1100 || PCMCIA_PXA2XX)
227 help
228 Say Y here to enable debugging for the SoC PCMCIA layer.
229 You will need to choose the debugging level either via the
230 kernel command line, or module options depending whether
231 you build the drivers as modules.
232
233 The kernel command line options are:
234 sa11xx_core.pc_debug=N
235 pxa2xx_core.pc_debug=N
236
237 The module option is called pc_debug=N
238
239 In all the above examples, N is the debugging verbosity
240 level.
241
242config PCMCIA_PROBE
243 bool
244 default y if ISA && !ARCH_SA1100 && !ARCH_CLPS711X && !PARISC
245
246config M32R_PCC
247 bool "M32R PCMCIA I/F"
248 depends on M32R && CHIP_M32700 && PCMCIA
249 help
250 Say Y here to use the M32R PCMCIA controller.
251
252config M32R_CFC
253 bool "M32R CF I/F Controller"
254 depends on M32R && (PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT)
255 help
256 Say Y here to use the M32R CompactFlash controller.
257
258config M32R_CFC_NUM
259 int "M32R CF I/F number"
260 depends on M32R_CFC
261 default "1" if PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT
262 help
263 Set the number of M32R CF slots.
264
265config PCMCIA_VRC4171
266 tristate "NEC VRC4171 Card Controllers support"
267 depends on CPU_VR41XX && ISA && PCMCIA
268
269config PCMCIA_VRC4173
270 tristate "NEC VRC4173 CARDU support"
271 depends on CPU_VR41XX && PCI && PCMCIA
272
273config OMAP_CF
274 tristate "OMAP CompactFlash Controller"
275 depends on PCMCIA && ARCH_OMAP16XX
276 help
277 Say Y here to support the CompactFlash controller on OMAP.
278 Note that this doesn't support "True IDE" mode.
279
280config BFIN_CFPCMCIA
281 tristate "Blackfin CompactFlash PCMCIA Driver"
282 depends on PCMCIA && BLACKFIN
283 help
284 Say Y here to support the CompactFlash PCMCIA driver for Blackfin.
285
286
287config AT91_CF
288 tristate "AT91 CompactFlash Controller"
289 depends on PCMCIA && ARCH_AT91RM9200
290 help
291 Say Y here to support the CompactFlash controller on AT91 chips.
292 Or choose M to compile the driver as a module named "at91_cf".
293
294config ELECTRA_CF
295 tristate "Electra CompactFlash Controller"
296 depends on PCMCIA && PPC_PASEMI
297 help
298 Say Y here to support the CompactFlash controller on the
299 PA Semi Electra eval board.
300
301config PCCARD_NONSTATIC
302 bool
303
304config PCCARD_IODYN
305 bool
306
307endif # PCCARD
1#
2# PCCARD (PCMCIA/CardBus) bus subsystem configuration
3#
4
5menuconfig PCCARD
6 tristate "PCCard (PCMCIA/CardBus) support"
7 ---help---
8 Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
9 computer. These are credit-card size devices such as network cards,
10 modems or hard drives often used with laptops computers. There are
11 actually two varieties of these cards: 16 bit PCMCIA and 32 bit
12 CardBus cards.
13
14 To compile this driver as modules, choose M here: the
15 module will be called pcmcia_core.
16
17if PCCARD
18
19config PCMCIA
20 tristate "16-bit PCMCIA support"
21 select CRC32
22 default y
23 ---help---
24 This option enables support for 16-bit PCMCIA cards. Most older
25 PC-cards are such 16-bit PCMCIA cards, so unless you know you're
26 only using 32-bit CardBus cards, say Y or M here.
27
28 To use 16-bit PCMCIA cards, you will need supporting software in
29 most cases. (see the file <file:Documentation/Changes> for
30 location and details).
31
32 To compile this driver as modules, choose M here: the
33 module will be called pcmcia.
34
35 If unsure, say Y.
36
37config PCMCIA_LOAD_CIS
38 bool "Load CIS updates from userspace"
39 depends on PCMCIA
40 select FW_LOADER
41 default y
42 help
43 Some PCMCIA cards require an updated Card Information Structure (CIS)
44 to be loaded from userspace to work correctly. If you say Y here,
45 and your userspace is arranged correctly, this will be loaded
46 automatically using the in-kernel firmware loader and the hotplug
47 subsystem, instead of relying on cardmgr from pcmcia-cs to do so.
48
49 If unsure, say Y.
50
51config CARDBUS
52 bool "32-bit CardBus support"
53 depends on PCI
54 default y
55 ---help---
56 CardBus is a bus mastering architecture for PC-cards, which allows
57 for 32 bit PC-cards (the original PCMCIA standard specifies only
58 a 16 bit wide bus). Many newer PC-cards are actually CardBus cards.
59
60 To use 32 bit PC-cards, you also need a CardBus compatible host
61 bridge. Virtually all modern PCMCIA bridges do this, and most of
62 them are "yenta-compatible", so say Y or M there, too.
63
64 If unsure, say Y.
65
66comment "PC-card bridges"
67
68config YENTA
69 tristate "CardBus yenta-compatible bridge support"
70 depends on PCI
71 select CARDBUS if !EXPERT
72 select PCCARD_NONSTATIC if PCMCIA != n
73 ---help---
74 This option enables support for CardBus host bridges. Virtually
75 all modern PCMCIA bridges are CardBus compatible. A "bridge" is
76 the hardware inside your computer that PCMCIA cards are plugged
77 into.
78
79 To compile this driver as modules, choose M here: the
80 module will be called yenta_socket.
81
82 If unsure, say Y.
83
84config YENTA_O2
85 default y
86 bool "Special initialization for O2Micro bridges" if EXPERT
87 depends on YENTA
88
89config YENTA_RICOH
90 default y
91 bool "Special initialization for Ricoh bridges" if EXPERT
92 depends on YENTA
93
94config YENTA_TI
95 default y
96 bool "Special initialization for TI and EnE bridges" if EXPERT
97 depends on YENTA
98
99config YENTA_ENE_TUNE
100 default y
101 bool "Auto-tune EnE bridges for CB cards" if EXPERT
102 depends on YENTA_TI && CARDBUS
103
104config YENTA_TOSHIBA
105 default y
106 bool "Special initialization for Toshiba ToPIC bridges" if EXPERT
107 depends on YENTA
108
109config PD6729
110 tristate "Cirrus PD6729 compatible bridge support"
111 depends on PCMCIA && PCI
112 select PCCARD_NONSTATIC
113 help
114 This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge
115 device, found in some older laptops and PCMCIA card readers.
116
117config I82092
118 tristate "i82092 compatible bridge support"
119 depends on PCMCIA && PCI
120 select PCCARD_NONSTATIC
121 help
122 This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device,
123 found in some older laptops and more commonly in evaluation boards for the
124 chip.
125
126config I82365
127 tristate "i82365 compatible bridge support"
128 depends on PCMCIA && ISA
129 select PCCARD_NONSTATIC
130 help
131 Say Y here to include support for ISA-bus PCMCIA host bridges that
132 are register compatible with the Intel i82365. These are found on
133 older laptops and ISA-bus card readers for desktop systems. A
134 "bridge" is the hardware inside your computer that PCMCIA cards are
135 plugged into. If unsure, say N.
136
137config TCIC
138 tristate "Databook TCIC host bridge support"
139 depends on PCMCIA && ISA
140 select PCCARD_NONSTATIC
141 help
142 Say Y here to include support for the Databook TCIC family of PCMCIA
143 host bridges. These are only found on a handful of old systems.
144 "Bridge" is the name used for the hardware inside your computer that
145 PCMCIA cards are plugged into. If unsure, say N.
146
147config PCMCIA_ALCHEMY_DEVBOARD
148 tristate "Alchemy Db/Pb1xxx PCMCIA socket services"
149 depends on MIPS_ALCHEMY && PCMCIA
150 help
151 Enable this driver of you want PCMCIA support on your Alchemy
152 Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200, DB1300
153 board. NOT suitable for the PB1000!
154
155 This driver is also available as a module called db1xxx_ss.ko
156
157config PCMCIA_XXS1500
158 tristate "MyCable XXS1500 PCMCIA socket support"
159 depends on PCMCIA && MIPS_XXS1500
160 help
161 Support for the PCMCIA/CF socket interface on MyCable XXS1500
162 systems.
163
164 This driver is also available as a module called xxs1500_ss.ko
165
166config PCMCIA_BCM63XX
167 tristate "bcm63xx pcmcia support"
168 depends on BCM63XX && PCMCIA
169
170config PCMCIA_SOC_COMMON
171 tristate
172
173config PCMCIA_SA11XX_BASE
174 tristate
175
176config PCMCIA_SA1100
177 tristate "SA1100 support"
178 depends on ARM && ARCH_SA1100 && PCMCIA
179 select PCMCIA_SOC_COMMON
180 select PCMCIA_SA11XX_BASE
181 help
182 Say Y here to include support for SA11x0-based PCMCIA or CF
183 sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/
184 Xscale(R) embedded machines.
185
186 This driver is also available as a module called sa1100_cs.
187
188config PCMCIA_SA1111
189 tristate "SA1111 support"
190 depends on ARM && SA1111 && PCMCIA
191 select PCMCIA_SOC_COMMON
192 select PCMCIA_SA11XX_BASE if ARCH_SA1100
193 select PCMCIA_PXA2XX if ARCH_LUBBOCK && SA1111
194 help
195 Say Y here to include support for SA1111-based PCMCIA or CF
196 sockets, found on the Jornada 720, Graphicsmaster and other
197 StrongARM(R)/Xscale(R) embedded machines.
198
199 This driver is also available as a module called sa1111_cs.
200
201config PCMCIA_PXA2XX
202 tristate "PXA2xx support"
203 depends on ARM && ARCH_PXA && PCMCIA
204 depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
205 || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
206 || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \
207 || MACH_VPAC270 || MACH_BALLOON3 || MACH_COLIBRI \
208 || MACH_COLIBRI320 || MACH_H4700)
209 select PCMCIA_SOC_COMMON
210 help
211 Say Y here to include support for the PXA2xx PCMCIA controller
212
213config PCMCIA_DEBUG
214 bool "Enable debugging"
215 depends on (PCMCIA_SA1111 || PCMCIA_SA1100 || PCMCIA_PXA2XX)
216 help
217 Say Y here to enable debugging for the SoC PCMCIA layer.
218 You will need to choose the debugging level either via the
219 kernel command line, or module options depending whether
220 you build the drivers as modules.
221
222 The kernel command line options are:
223 sa11xx_core.pc_debug=N
224 pxa2xx_core.pc_debug=N
225
226 The module option is called pc_debug=N
227
228 In all the above examples, N is the debugging verbosity
229 level.
230
231config PCMCIA_PROBE
232 bool
233 default y if ISA && !ARCH_SA1100 && !PARISC
234
235config M32R_PCC
236 bool "M32R PCMCIA I/F"
237 depends on M32R && CHIP_M32700 && PCMCIA
238 help
239 Say Y here to use the M32R PCMCIA controller.
240
241config M32R_CFC
242 bool "M32R CF I/F Controller"
243 depends on M32R && (PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT)
244 help
245 Say Y here to use the M32R CompactFlash controller.
246
247config M32R_CFC_NUM
248 int "M32R CF I/F number"
249 depends on M32R_CFC
250 default "1" if PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT
251 help
252 Set the number of M32R CF slots.
253
254config PCMCIA_VRC4171
255 tristate "NEC VRC4171 Card Controllers support"
256 depends on CPU_VR41XX && ISA && PCMCIA
257
258config PCMCIA_VRC4173
259 tristate "NEC VRC4173 CARDU support"
260 depends on CPU_VR41XX && PCI && PCMCIA
261
262config OMAP_CF
263 tristate "OMAP CompactFlash Controller"
264 depends on PCMCIA && ARCH_OMAP16XX
265 help
266 Say Y here to support the CompactFlash controller on OMAP.
267 Note that this doesn't support "True IDE" mode.
268
269config BFIN_CFPCMCIA
270 tristate "Blackfin CompactFlash PCMCIA Driver"
271 depends on PCMCIA && BLACKFIN
272 help
273 Say Y here to support the CompactFlash PCMCIA driver for Blackfin.
274
275
276config AT91_CF
277 tristate "AT91 CompactFlash Controller"
278 depends on PCI
279 depends on PCMCIA && ARCH_AT91
280 help
281 Say Y here to support the CompactFlash controller on AT91 chips.
282 Or choose M to compile the driver as a module named "at91_cf".
283
284config ELECTRA_CF
285 tristate "Electra CompactFlash Controller"
286 depends on PCMCIA && PPC_PASEMI
287 help
288 Say Y here to support the CompactFlash controller on the
289 PA Semi Electra eval board.
290
291config PCCARD_NONSTATIC
292 bool
293
294config PCCARD_IODYN
295 bool
296
297endif # PCCARD