Loading...
1/*
2 * New ATA layer SC1200 driver Alan Cox <alan@lxorguk.ukuu.org.uk>
3 *
4 * TODO: Mode selection filtering
5 * TODO: Needs custom DMA cleanup code
6 *
7 * Based very heavily on
8 *
9 * linux/drivers/ide/pci/sc1200.c Version 0.91 28-Jan-2003
10 *
11 * Copyright (C) 2000-2002 Mark Lord <mlord@pobox.com>
12 * May be copied or modified under the terms of the GNU General Public License
13 *
14 * Development of this chipset driver was funded
15 * by the nice folks at National Semiconductor.
16 *
17 * This program is free software; you can redistribute it and/or modify
18 * it under the terms of the GNU General Public License version 2 as
19 * published by the Free Software Foundation.
20 *
21 * This program is distributed in the hope that it will be useful,
22 * but WITHOUT ANY WARRANTY; without even the implied warranty of
23 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
24 * GNU General Public License for more details.
25 *
26 * You should have received a copy of the GNU General Public License
27 * along with this program; if not, write to the Free Software
28 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
29 *
30 */
31
32#include <linux/kernel.h>
33#include <linux/module.h>
34#include <linux/pci.h>
35#include <linux/init.h>
36#include <linux/blkdev.h>
37#include <linux/delay.h>
38#include <scsi/scsi_host.h>
39#include <linux/libata.h>
40
41#define DRV_NAME "sc1200"
42#define DRV_VERSION "0.2.6"
43
44#define SC1200_REV_A 0x00
45#define SC1200_REV_B1 0x01
46#define SC1200_REV_B3 0x02
47#define SC1200_REV_C1 0x03
48#define SC1200_REV_D1 0x04
49
50/**
51 * sc1200_clock - PCI clock
52 *
53 * Return the PCI bus clocking for the SC1200 chipset configuration
54 * in use. We return 0 for 33MHz 1 for 48MHz and 2 for 66Mhz
55 */
56
57static int sc1200_clock(void)
58{
59 /* Magic registers that give us the chipset data */
60 u8 chip_id = inb(0x903C);
61 u8 silicon_rev = inb(0x903D);
62 u16 pci_clock;
63
64 if (chip_id == 0x04 && silicon_rev < SC1200_REV_B1)
65 return 0; /* 33 MHz mode */
66
67 /* Clock generator configuration 0x901E its 8/9 are the PCI clocking
68 0/3 is 33Mhz 1 is 48 2 is 66 */
69
70 pci_clock = inw(0x901E);
71 pci_clock >>= 8;
72 pci_clock &= 0x03;
73 if (pci_clock == 3)
74 pci_clock = 0;
75 return pci_clock;
76}
77
78/**
79 * sc1200_set_piomode - PIO setup
80 * @ap: ATA interface
81 * @adev: device on the interface
82 *
83 * Set our PIO requirements. This is fairly simple on the SC1200
84 */
85
86static void sc1200_set_piomode(struct ata_port *ap, struct ata_device *adev)
87{
88 static const u32 pio_timings[4][5] = {
89 {0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010}, // format0 33Mhz
90 {0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010}, // format1, 33Mhz
91 {0xfaa3f4f3, 0xc23232b2, 0x513101c1, 0x31213121, 0x10211021}, // format1, 48Mhz
92 {0xfff4fff4, 0xf35353d3, 0x814102f1, 0x42314231, 0x11311131} // format1, 66Mhz
93 };
94
95 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
96 u32 format;
97 unsigned int reg = 0x40 + 0x10 * ap->port_no;
98 int mode = adev->pio_mode - XFER_PIO_0;
99
100 pci_read_config_dword(pdev, reg + 4, &format);
101 format >>= 31;
102 format += sc1200_clock();
103 pci_write_config_dword(pdev, reg + 8 * adev->devno,
104 pio_timings[format][mode]);
105}
106
107/**
108 * sc1200_set_dmamode - DMA timing setup
109 * @ap: ATA interface
110 * @adev: Device being configured
111 *
112 * We cannot mix MWDMA and UDMA without reloading timings each switch
113 * master to slave.
114 */
115
116static void sc1200_set_dmamode(struct ata_port *ap, struct ata_device *adev)
117{
118 static const u32 udma_timing[3][3] = {
119 { 0x00921250, 0x00911140, 0x00911030 },
120 { 0x00932470, 0x00922260, 0x00922140 },
121 { 0x009436A1, 0x00933481, 0x00923261 }
122 };
123
124 static const u32 mwdma_timing[3][3] = {
125 { 0x00077771, 0x00012121, 0x00002020 },
126 { 0x000BBBB2, 0x00024241, 0x00013131 },
127 { 0x000FFFF3, 0x00035352, 0x00015151 }
128 };
129
130 int clock = sc1200_clock();
131 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
132 unsigned int reg = 0x40 + 0x10 * ap->port_no;
133 int mode = adev->dma_mode;
134 u32 format;
135
136 if (mode >= XFER_UDMA_0)
137 format = udma_timing[clock][mode - XFER_UDMA_0];
138 else
139 format = mwdma_timing[clock][mode - XFER_MW_DMA_0];
140
141 if (adev->devno == 0) {
142 u32 timings;
143
144 pci_read_config_dword(pdev, reg + 4, &timings);
145 timings &= 0x80000000UL;
146 timings |= format;
147 pci_write_config_dword(pdev, reg + 4, timings);
148 } else
149 pci_write_config_dword(pdev, reg + 12, format);
150}
151
152/**
153 * sc1200_qc_issue - command issue
154 * @qc: command pending
155 *
156 * Called when the libata layer is about to issue a command. We wrap
157 * this interface so that we can load the correct ATA timings if
158 * necessary. Specifically we have a problem that there is only
159 * one MWDMA/UDMA bit.
160 */
161
162static unsigned int sc1200_qc_issue(struct ata_queued_cmd *qc)
163{
164 struct ata_port *ap = qc->ap;
165 struct ata_device *adev = qc->dev;
166 struct ata_device *prev = ap->private_data;
167
168 /* See if the DMA settings could be wrong */
169 if (ata_dma_enabled(adev) && adev != prev && prev != NULL) {
170 /* Maybe, but do the channels match MWDMA/UDMA ? */
171 if ((ata_using_udma(adev) && !ata_using_udma(prev)) ||
172 (ata_using_udma(prev) && !ata_using_udma(adev)))
173 /* Switch the mode bits */
174 sc1200_set_dmamode(ap, adev);
175 }
176
177 return ata_bmdma_qc_issue(qc);
178}
179
180/**
181 * sc1200_qc_defer - implement serialization
182 * @qc: command
183 *
184 * Serialize command issue on this controller.
185 */
186
187static int sc1200_qc_defer(struct ata_queued_cmd *qc)
188{
189 struct ata_host *host = qc->ap->host;
190 struct ata_port *alt = host->ports[1 ^ qc->ap->port_no];
191 int rc;
192
193 /* First apply the usual rules */
194 rc = ata_std_qc_defer(qc);
195 if (rc != 0)
196 return rc;
197
198 /* Now apply serialization rules. Only allow a command if the
199 other channel state machine is idle */
200 if (alt && alt->qc_active)
201 return ATA_DEFER_PORT;
202 return 0;
203}
204
205static struct scsi_host_template sc1200_sht = {
206 ATA_BMDMA_SHT(DRV_NAME),
207 .sg_tablesize = LIBATA_DUMB_MAX_PRD,
208};
209
210static struct ata_port_operations sc1200_port_ops = {
211 .inherits = &ata_bmdma_port_ops,
212 .qc_prep = ata_bmdma_dumb_qc_prep,
213 .qc_issue = sc1200_qc_issue,
214 .qc_defer = sc1200_qc_defer,
215 .cable_detect = ata_cable_40wire,
216 .set_piomode = sc1200_set_piomode,
217 .set_dmamode = sc1200_set_dmamode,
218};
219
220/**
221 * sc1200_init_one - Initialise an SC1200
222 * @dev: PCI device
223 * @id: Entry in match table
224 *
225 * Just throw the needed data at the libata helper and it does all
226 * our work.
227 */
228
229static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
230{
231 static const struct ata_port_info info = {
232 .flags = ATA_FLAG_SLAVE_POSS,
233 .pio_mask = ATA_PIO4,
234 .mwdma_mask = ATA_MWDMA2,
235 .udma_mask = ATA_UDMA2,
236 .port_ops = &sc1200_port_ops
237 };
238 const struct ata_port_info *ppi[] = { &info, NULL };
239
240 return ata_pci_bmdma_init_one(dev, ppi, &sc1200_sht, NULL, 0);
241}
242
243static const struct pci_device_id sc1200[] = {
244 { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_SCx200_IDE), },
245
246 { },
247};
248
249static struct pci_driver sc1200_pci_driver = {
250 .name = DRV_NAME,
251 .id_table = sc1200,
252 .probe = sc1200_init_one,
253 .remove = ata_pci_remove_one,
254#ifdef CONFIG_PM
255 .suspend = ata_pci_device_suspend,
256 .resume = ata_pci_device_resume,
257#endif
258};
259
260static int __init sc1200_init(void)
261{
262 return pci_register_driver(&sc1200_pci_driver);
263}
264
265static void __exit sc1200_exit(void)
266{
267 pci_unregister_driver(&sc1200_pci_driver);
268}
269
270MODULE_AUTHOR("Alan Cox, Mark Lord");
271MODULE_DESCRIPTION("low-level driver for the NS/AMD SC1200");
272MODULE_LICENSE("GPL");
273MODULE_DEVICE_TABLE(pci, sc1200);
274MODULE_VERSION(DRV_VERSION);
275
276module_init(sc1200_init);
277module_exit(sc1200_exit);
1/*
2 * New ATA layer SC1200 driver Alan Cox <alan@lxorguk.ukuu.org.uk>
3 *
4 * TODO: Mode selection filtering
5 * TODO: Needs custom DMA cleanup code
6 *
7 * Based very heavily on
8 *
9 * linux/drivers/ide/pci/sc1200.c Version 0.91 28-Jan-2003
10 *
11 * Copyright (C) 2000-2002 Mark Lord <mlord@pobox.com>
12 * May be copied or modified under the terms of the GNU General Public License
13 *
14 * Development of this chipset driver was funded
15 * by the nice folks at National Semiconductor.
16 *
17 * This program is free software; you can redistribute it and/or modify
18 * it under the terms of the GNU General Public License version 2 as
19 * published by the Free Software Foundation.
20 *
21 * This program is distributed in the hope that it will be useful,
22 * but WITHOUT ANY WARRANTY; without even the implied warranty of
23 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
24 * GNU General Public License for more details.
25 *
26 * You should have received a copy of the GNU General Public License
27 * along with this program; if not, write to the Free Software
28 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
29 *
30 */
31
32#include <linux/kernel.h>
33#include <linux/module.h>
34#include <linux/pci.h>
35#include <linux/blkdev.h>
36#include <linux/delay.h>
37#include <scsi/scsi_host.h>
38#include <linux/libata.h>
39
40#define DRV_NAME "pata_sc1200"
41#define DRV_VERSION "0.2.6"
42
43#define SC1200_REV_A 0x00
44#define SC1200_REV_B1 0x01
45#define SC1200_REV_B3 0x02
46#define SC1200_REV_C1 0x03
47#define SC1200_REV_D1 0x04
48
49/**
50 * sc1200_clock - PCI clock
51 *
52 * Return the PCI bus clocking for the SC1200 chipset configuration
53 * in use. We return 0 for 33MHz 1 for 48MHz and 2 for 66Mhz
54 */
55
56static int sc1200_clock(void)
57{
58 /* Magic registers that give us the chipset data */
59 u8 chip_id = inb(0x903C);
60 u8 silicon_rev = inb(0x903D);
61 u16 pci_clock;
62
63 if (chip_id == 0x04 && silicon_rev < SC1200_REV_B1)
64 return 0; /* 33 MHz mode */
65
66 /* Clock generator configuration 0x901E its 8/9 are the PCI clocking
67 0/3 is 33Mhz 1 is 48 2 is 66 */
68
69 pci_clock = inw(0x901E);
70 pci_clock >>= 8;
71 pci_clock &= 0x03;
72 if (pci_clock == 3)
73 pci_clock = 0;
74 return pci_clock;
75}
76
77/**
78 * sc1200_set_piomode - PIO setup
79 * @ap: ATA interface
80 * @adev: device on the interface
81 *
82 * Set our PIO requirements. This is fairly simple on the SC1200
83 */
84
85static void sc1200_set_piomode(struct ata_port *ap, struct ata_device *adev)
86{
87 static const u32 pio_timings[4][5] = {
88 /* format0, 33Mhz */
89 { 0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010 },
90 /* format1, 33Mhz */
91 { 0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010 },
92 /* format1, 48Mhz */
93 { 0xfaa3f4f3, 0xc23232b2, 0x513101c1, 0x31213121, 0x10211021 },
94 /* format1, 66Mhz */
95 { 0xfff4fff4, 0xf35353d3, 0x814102f1, 0x42314231, 0x11311131 }
96 };
97
98 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
99 u32 format;
100 unsigned int reg = 0x40 + 0x10 * ap->port_no;
101 int mode = adev->pio_mode - XFER_PIO_0;
102
103 pci_read_config_dword(pdev, reg + 4, &format);
104 format >>= 31;
105 format += sc1200_clock();
106 pci_write_config_dword(pdev, reg + 8 * adev->devno,
107 pio_timings[format][mode]);
108}
109
110/**
111 * sc1200_set_dmamode - DMA timing setup
112 * @ap: ATA interface
113 * @adev: Device being configured
114 *
115 * We cannot mix MWDMA and UDMA without reloading timings each switch
116 * master to slave.
117 */
118
119static void sc1200_set_dmamode(struct ata_port *ap, struct ata_device *adev)
120{
121 static const u32 udma_timing[3][3] = {
122 { 0x00921250, 0x00911140, 0x00911030 },
123 { 0x00932470, 0x00922260, 0x00922140 },
124 { 0x009436A1, 0x00933481, 0x00923261 }
125 };
126
127 static const u32 mwdma_timing[3][3] = {
128 { 0x00077771, 0x00012121, 0x00002020 },
129 { 0x000BBBB2, 0x00024241, 0x00013131 },
130 { 0x000FFFF3, 0x00035352, 0x00015151 }
131 };
132
133 int clock = sc1200_clock();
134 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
135 unsigned int reg = 0x40 + 0x10 * ap->port_no;
136 int mode = adev->dma_mode;
137 u32 format;
138
139 if (mode >= XFER_UDMA_0)
140 format = udma_timing[clock][mode - XFER_UDMA_0];
141 else
142 format = mwdma_timing[clock][mode - XFER_MW_DMA_0];
143
144 if (adev->devno == 0) {
145 u32 timings;
146
147 pci_read_config_dword(pdev, reg + 4, &timings);
148 timings &= 0x80000000UL;
149 timings |= format;
150 pci_write_config_dword(pdev, reg + 4, timings);
151 } else
152 pci_write_config_dword(pdev, reg + 12, format);
153}
154
155/**
156 * sc1200_qc_issue - command issue
157 * @qc: command pending
158 *
159 * Called when the libata layer is about to issue a command. We wrap
160 * this interface so that we can load the correct ATA timings if
161 * necessary. Specifically we have a problem that there is only
162 * one MWDMA/UDMA bit.
163 */
164
165static unsigned int sc1200_qc_issue(struct ata_queued_cmd *qc)
166{
167 struct ata_port *ap = qc->ap;
168 struct ata_device *adev = qc->dev;
169 struct ata_device *prev = ap->private_data;
170
171 /* See if the DMA settings could be wrong */
172 if (ata_dma_enabled(adev) && adev != prev && prev != NULL) {
173 /* Maybe, but do the channels match MWDMA/UDMA ? */
174 if ((ata_using_udma(adev) && !ata_using_udma(prev)) ||
175 (ata_using_udma(prev) && !ata_using_udma(adev)))
176 /* Switch the mode bits */
177 sc1200_set_dmamode(ap, adev);
178 }
179
180 return ata_bmdma_qc_issue(qc);
181}
182
183/**
184 * sc1200_qc_defer - implement serialization
185 * @qc: command
186 *
187 * Serialize command issue on this controller.
188 */
189
190static int sc1200_qc_defer(struct ata_queued_cmd *qc)
191{
192 struct ata_host *host = qc->ap->host;
193 struct ata_port *alt = host->ports[1 ^ qc->ap->port_no];
194 int rc;
195
196 /* First apply the usual rules */
197 rc = ata_std_qc_defer(qc);
198 if (rc != 0)
199 return rc;
200
201 /* Now apply serialization rules. Only allow a command if the
202 other channel state machine is idle */
203 if (alt && alt->qc_active)
204 return ATA_DEFER_PORT;
205 return 0;
206}
207
208static struct scsi_host_template sc1200_sht = {
209 ATA_BMDMA_SHT(DRV_NAME),
210 .sg_tablesize = LIBATA_DUMB_MAX_PRD,
211};
212
213static struct ata_port_operations sc1200_port_ops = {
214 .inherits = &ata_bmdma_port_ops,
215 .qc_prep = ata_bmdma_dumb_qc_prep,
216 .qc_issue = sc1200_qc_issue,
217 .qc_defer = sc1200_qc_defer,
218 .cable_detect = ata_cable_40wire,
219 .set_piomode = sc1200_set_piomode,
220 .set_dmamode = sc1200_set_dmamode,
221};
222
223/**
224 * sc1200_init_one - Initialise an SC1200
225 * @dev: PCI device
226 * @id: Entry in match table
227 *
228 * Just throw the needed data at the libata helper and it does all
229 * our work.
230 */
231
232static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
233{
234 static const struct ata_port_info info = {
235 .flags = ATA_FLAG_SLAVE_POSS,
236 .pio_mask = ATA_PIO4,
237 .mwdma_mask = ATA_MWDMA2,
238 .udma_mask = ATA_UDMA2,
239 .port_ops = &sc1200_port_ops
240 };
241 const struct ata_port_info *ppi[] = { &info, NULL };
242
243 return ata_pci_bmdma_init_one(dev, ppi, &sc1200_sht, NULL, 0);
244}
245
246static const struct pci_device_id sc1200[] = {
247 { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_SCx200_IDE), },
248
249 { },
250};
251
252static struct pci_driver sc1200_pci_driver = {
253 .name = DRV_NAME,
254 .id_table = sc1200,
255 .probe = sc1200_init_one,
256 .remove = ata_pci_remove_one,
257#ifdef CONFIG_PM_SLEEP
258 .suspend = ata_pci_device_suspend,
259 .resume = ata_pci_device_resume,
260#endif
261};
262
263module_pci_driver(sc1200_pci_driver);
264
265MODULE_AUTHOR("Alan Cox, Mark Lord");
266MODULE_DESCRIPTION("low-level driver for the NS/AMD SC1200");
267MODULE_LICENSE("GPL");
268MODULE_DEVICE_TABLE(pci, sc1200);
269MODULE_VERSION(DRV_VERSION);