Loading...
1/******************************************************************************
2 *
3 * Module Name: tbfadt - FADT table utilities
4 *
5 *****************************************************************************/
6
7/*
8 * Copyright (C) 2000 - 2011, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44#include <acpi/acpi.h>
45#include "accommon.h"
46#include "actables.h"
47
48#define _COMPONENT ACPI_TABLES
49ACPI_MODULE_NAME("tbfadt")
50
51/* Local prototypes */
52static ACPI_INLINE void
53acpi_tb_init_generic_address(struct acpi_generic_address *generic_address,
54 u8 space_id, u8 byte_width, u64 address);
55
56static void acpi_tb_convert_fadt(void);
57
58static void acpi_tb_validate_fadt(void);
59
60static void acpi_tb_setup_fadt_registers(void);
61
62/* Table for conversion of FADT to common internal format and FADT validation */
63
64typedef struct acpi_fadt_info {
65 char *name;
66 u8 address64;
67 u8 address32;
68 u8 length;
69 u8 default_length;
70 u8 type;
71
72} acpi_fadt_info;
73
74#define ACPI_FADT_REQUIRED 1
75#define ACPI_FADT_SEPARATE_LENGTH 2
76
77static struct acpi_fadt_info fadt_info_table[] = {
78 {"Pm1aEventBlock",
79 ACPI_FADT_OFFSET(xpm1a_event_block),
80 ACPI_FADT_OFFSET(pm1a_event_block),
81 ACPI_FADT_OFFSET(pm1_event_length),
82 ACPI_PM1_REGISTER_WIDTH * 2, /* Enable + Status register */
83 ACPI_FADT_REQUIRED},
84
85 {"Pm1bEventBlock",
86 ACPI_FADT_OFFSET(xpm1b_event_block),
87 ACPI_FADT_OFFSET(pm1b_event_block),
88 ACPI_FADT_OFFSET(pm1_event_length),
89 ACPI_PM1_REGISTER_WIDTH * 2, /* Enable + Status register */
90 0},
91
92 {"Pm1aControlBlock",
93 ACPI_FADT_OFFSET(xpm1a_control_block),
94 ACPI_FADT_OFFSET(pm1a_control_block),
95 ACPI_FADT_OFFSET(pm1_control_length),
96 ACPI_PM1_REGISTER_WIDTH,
97 ACPI_FADT_REQUIRED},
98
99 {"Pm1bControlBlock",
100 ACPI_FADT_OFFSET(xpm1b_control_block),
101 ACPI_FADT_OFFSET(pm1b_control_block),
102 ACPI_FADT_OFFSET(pm1_control_length),
103 ACPI_PM1_REGISTER_WIDTH,
104 0},
105
106 {"Pm2ControlBlock",
107 ACPI_FADT_OFFSET(xpm2_control_block),
108 ACPI_FADT_OFFSET(pm2_control_block),
109 ACPI_FADT_OFFSET(pm2_control_length),
110 ACPI_PM2_REGISTER_WIDTH,
111 ACPI_FADT_SEPARATE_LENGTH},
112
113 {"PmTimerBlock",
114 ACPI_FADT_OFFSET(xpm_timer_block),
115 ACPI_FADT_OFFSET(pm_timer_block),
116 ACPI_FADT_OFFSET(pm_timer_length),
117 ACPI_PM_TIMER_WIDTH,
118 ACPI_FADT_REQUIRED},
119
120 {"Gpe0Block",
121 ACPI_FADT_OFFSET(xgpe0_block),
122 ACPI_FADT_OFFSET(gpe0_block),
123 ACPI_FADT_OFFSET(gpe0_block_length),
124 0,
125 ACPI_FADT_SEPARATE_LENGTH},
126
127 {"Gpe1Block",
128 ACPI_FADT_OFFSET(xgpe1_block),
129 ACPI_FADT_OFFSET(gpe1_block),
130 ACPI_FADT_OFFSET(gpe1_block_length),
131 0,
132 ACPI_FADT_SEPARATE_LENGTH}
133};
134
135#define ACPI_FADT_INFO_ENTRIES \
136 (sizeof (fadt_info_table) / sizeof (struct acpi_fadt_info))
137
138/* Table used to split Event Blocks into separate status/enable registers */
139
140typedef struct acpi_fadt_pm_info {
141 struct acpi_generic_address *target;
142 u8 source;
143 u8 register_num;
144
145} acpi_fadt_pm_info;
146
147static struct acpi_fadt_pm_info fadt_pm_info_table[] = {
148 {&acpi_gbl_xpm1a_status,
149 ACPI_FADT_OFFSET(xpm1a_event_block),
150 0},
151
152 {&acpi_gbl_xpm1a_enable,
153 ACPI_FADT_OFFSET(xpm1a_event_block),
154 1},
155
156 {&acpi_gbl_xpm1b_status,
157 ACPI_FADT_OFFSET(xpm1b_event_block),
158 0},
159
160 {&acpi_gbl_xpm1b_enable,
161 ACPI_FADT_OFFSET(xpm1b_event_block),
162 1}
163};
164
165#define ACPI_FADT_PM_INFO_ENTRIES \
166 (sizeof (fadt_pm_info_table) / sizeof (struct acpi_fadt_pm_info))
167
168/*******************************************************************************
169 *
170 * FUNCTION: acpi_tb_init_generic_address
171 *
172 * PARAMETERS: generic_address - GAS struct to be initialized
173 * byte_width - Width of this register
174 * Address - Address of the register
175 *
176 * RETURN: None
177 *
178 * DESCRIPTION: Initialize a Generic Address Structure (GAS)
179 * See the ACPI specification for a full description and
180 * definition of this structure.
181 *
182 ******************************************************************************/
183
184static ACPI_INLINE void
185acpi_tb_init_generic_address(struct acpi_generic_address *generic_address,
186 u8 space_id, u8 byte_width, u64 address)
187{
188
189 /*
190 * The 64-bit Address field is non-aligned in the byte packed
191 * GAS struct.
192 */
193 ACPI_MOVE_64_TO_64(&generic_address->address, &address);
194
195 /* All other fields are byte-wide */
196
197 generic_address->space_id = space_id;
198 generic_address->bit_width = (u8)ACPI_MUL_8(byte_width);
199 generic_address->bit_offset = 0;
200 generic_address->access_width = 0; /* Access width ANY */
201}
202
203/*******************************************************************************
204 *
205 * FUNCTION: acpi_tb_parse_fadt
206 *
207 * PARAMETERS: table_index - Index for the FADT
208 *
209 * RETURN: None
210 *
211 * DESCRIPTION: Initialize the FADT, DSDT and FACS tables
212 * (FADT contains the addresses of the DSDT and FACS)
213 *
214 ******************************************************************************/
215
216void acpi_tb_parse_fadt(u32 table_index)
217{
218 u32 length;
219 struct acpi_table_header *table;
220
221 /*
222 * The FADT has multiple versions with different lengths,
223 * and it contains pointers to both the DSDT and FACS tables.
224 *
225 * Get a local copy of the FADT and convert it to a common format
226 * Map entire FADT, assumed to be smaller than one page.
227 */
228 length = acpi_gbl_root_table_list.tables[table_index].length;
229
230 table =
231 acpi_os_map_memory(acpi_gbl_root_table_list.tables[table_index].
232 address, length);
233 if (!table) {
234 return;
235 }
236
237 /*
238 * Validate the FADT checksum before we copy the table. Ignore
239 * checksum error as we want to try to get the DSDT and FACS.
240 */
241 (void)acpi_tb_verify_checksum(table, length);
242
243 /* Create a local copy of the FADT in common ACPI 2.0+ format */
244
245 acpi_tb_create_local_fadt(table, length);
246
247 /* All done with the real FADT, unmap it */
248
249 acpi_os_unmap_memory(table, length);
250
251 /* Obtain the DSDT and FACS tables via their addresses within the FADT */
252
253 acpi_tb_install_table((acpi_physical_address) acpi_gbl_FADT.Xdsdt,
254 ACPI_SIG_DSDT, ACPI_TABLE_INDEX_DSDT);
255
256 acpi_tb_install_table((acpi_physical_address) acpi_gbl_FADT.Xfacs,
257 ACPI_SIG_FACS, ACPI_TABLE_INDEX_FACS);
258}
259
260/*******************************************************************************
261 *
262 * FUNCTION: acpi_tb_create_local_fadt
263 *
264 * PARAMETERS: Table - Pointer to BIOS FADT
265 * Length - Length of the table
266 *
267 * RETURN: None
268 *
269 * DESCRIPTION: Get a local copy of the FADT and convert it to a common format.
270 * Performs validation on some important FADT fields.
271 *
272 * NOTE: We create a local copy of the FADT regardless of the version.
273 *
274 ******************************************************************************/
275
276void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length)
277{
278 /*
279 * Check if the FADT is larger than the largest table that we expect
280 * (the ACPI 2.0/3.0 version). If so, truncate the table, and issue
281 * a warning.
282 */
283 if (length > sizeof(struct acpi_table_fadt)) {
284 ACPI_WARNING((AE_INFO,
285 "FADT (revision %u) is longer than ACPI 2.0 version, "
286 "truncating length %u to %u",
287 table->revision, length,
288 (u32)sizeof(struct acpi_table_fadt)));
289 }
290
291 /* Clear the entire local FADT */
292
293 ACPI_MEMSET(&acpi_gbl_FADT, 0, sizeof(struct acpi_table_fadt));
294
295 /* Copy the original FADT, up to sizeof (struct acpi_table_fadt) */
296
297 ACPI_MEMCPY(&acpi_gbl_FADT, table,
298 ACPI_MIN(length, sizeof(struct acpi_table_fadt)));
299
300 /* Convert the local copy of the FADT to the common internal format */
301
302 acpi_tb_convert_fadt();
303
304 /* Validate FADT values now, before we make any changes */
305
306 acpi_tb_validate_fadt();
307
308 /* Initialize the global ACPI register structures */
309
310 acpi_tb_setup_fadt_registers();
311}
312
313/*******************************************************************************
314 *
315 * FUNCTION: acpi_tb_convert_fadt
316 *
317 * PARAMETERS: None, uses acpi_gbl_FADT
318 *
319 * RETURN: None
320 *
321 * DESCRIPTION: Converts all versions of the FADT to a common internal format.
322 * Expand 32-bit addresses to 64-bit as necessary.
323 *
324 * NOTE: acpi_gbl_FADT must be of size (struct acpi_table_fadt),
325 * and must contain a copy of the actual FADT.
326 *
327 * Notes on 64-bit register addresses:
328 *
329 * After this FADT conversion, later ACPICA code will only use the 64-bit "X"
330 * fields of the FADT for all ACPI register addresses.
331 *
332 * The 64-bit "X" fields are optional extensions to the original 32-bit FADT
333 * V1.0 fields. Even if they are present in the FADT, they are optional and
334 * are unused if the BIOS sets them to zero. Therefore, we must copy/expand
335 * 32-bit V1.0 fields if the corresponding X field is zero.
336 *
337 * For ACPI 1.0 FADTs, all 32-bit address fields are expanded to the
338 * corresponding "X" fields in the internal FADT.
339 *
340 * For ACPI 2.0+ FADTs, all valid (non-zero) 32-bit address fields are expanded
341 * to the corresponding 64-bit X fields. For compatibility with other ACPI
342 * implementations, we ignore the 64-bit field if the 32-bit field is valid,
343 * regardless of whether the host OS is 32-bit or 64-bit.
344 *
345 ******************************************************************************/
346
347static void acpi_tb_convert_fadt(void)
348{
349 struct acpi_generic_address *address64;
350 u32 address32;
351 u32 i;
352
353 /* Update the local FADT table header length */
354
355 acpi_gbl_FADT.header.length = sizeof(struct acpi_table_fadt);
356
357 /*
358 * Expand the 32-bit FACS and DSDT addresses to 64-bit as necessary.
359 * Later code will always use the X 64-bit field. Also, check for an
360 * address mismatch between the 32-bit and 64-bit address fields
361 * (FIRMWARE_CTRL/X_FIRMWARE_CTRL, DSDT/X_DSDT) which would indicate
362 * the presence of two FACS or two DSDT tables.
363 */
364 if (!acpi_gbl_FADT.Xfacs) {
365 acpi_gbl_FADT.Xfacs = (u64) acpi_gbl_FADT.facs;
366 } else if (acpi_gbl_FADT.facs &&
367 (acpi_gbl_FADT.Xfacs != (u64) acpi_gbl_FADT.facs)) {
368 ACPI_WARNING((AE_INFO,
369 "32/64 FACS address mismatch in FADT - two FACS tables!"));
370 }
371
372 if (!acpi_gbl_FADT.Xdsdt) {
373 acpi_gbl_FADT.Xdsdt = (u64) acpi_gbl_FADT.dsdt;
374 } else if (acpi_gbl_FADT.dsdt &&
375 (acpi_gbl_FADT.Xdsdt != (u64) acpi_gbl_FADT.dsdt)) {
376 ACPI_WARNING((AE_INFO,
377 "32/64 DSDT address mismatch in FADT - two DSDT tables!"));
378 }
379
380 /*
381 * For ACPI 1.0 FADTs (revision 1 or 2), ensure that reserved fields which
382 * should be zero are indeed zero. This will workaround BIOSs that
383 * inadvertently place values in these fields.
384 *
385 * The ACPI 1.0 reserved fields that will be zeroed are the bytes located at
386 * offset 45, 55, 95, and the word located at offset 109, 110.
387 *
388 * Note: The FADT revision value is unreliable. Only the length can be
389 * trusted.
390 */
391 if (acpi_gbl_FADT.header.length <= ACPI_FADT_V2_SIZE) {
392 acpi_gbl_FADT.preferred_profile = 0;
393 acpi_gbl_FADT.pstate_control = 0;
394 acpi_gbl_FADT.cst_control = 0;
395 acpi_gbl_FADT.boot_flags = 0;
396 }
397
398 /*
399 * Expand the ACPI 1.0 32-bit addresses to the ACPI 2.0 64-bit "X"
400 * generic address structures as necessary. Later code will always use
401 * the 64-bit address structures.
402 *
403 * March 2009:
404 * We now always use the 32-bit address if it is valid (non-null). This
405 * is not in accordance with the ACPI specification which states that
406 * the 64-bit address supersedes the 32-bit version, but we do this for
407 * compatibility with other ACPI implementations. Most notably, in the
408 * case where both the 32 and 64 versions are non-null, we use the 32-bit
409 * version. This is the only address that is guaranteed to have been
410 * tested by the BIOS manufacturer.
411 */
412 for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) {
413 address32 = *ACPI_ADD_PTR(u32,
414 &acpi_gbl_FADT,
415 fadt_info_table[i].address32);
416
417 address64 = ACPI_ADD_PTR(struct acpi_generic_address,
418 &acpi_gbl_FADT,
419 fadt_info_table[i].address64);
420
421 /*
422 * If both 32- and 64-bit addresses are valid (non-zero),
423 * they must match.
424 */
425 if (address64->address && address32 &&
426 (address64->address != (u64) address32)) {
427 ACPI_ERROR((AE_INFO,
428 "32/64X address mismatch in %s: 0x%8.8X/0x%8.8X%8.8X, using 32",
429 fadt_info_table[i].name, address32,
430 ACPI_FORMAT_UINT64(address64->address)));
431 }
432
433 /* Always use 32-bit address if it is valid (non-null) */
434
435 if (address32) {
436 /*
437 * Copy the 32-bit address to the 64-bit GAS structure. The
438 * Space ID is always I/O for 32-bit legacy address fields
439 */
440 acpi_tb_init_generic_address(address64,
441 ACPI_ADR_SPACE_SYSTEM_IO,
442 *ACPI_ADD_PTR(u8,
443 &acpi_gbl_FADT,
444 fadt_info_table
445 [i].length),
446 (u64) address32);
447 }
448 }
449}
450
451/*******************************************************************************
452 *
453 * FUNCTION: acpi_tb_validate_fadt
454 *
455 * PARAMETERS: Table - Pointer to the FADT to be validated
456 *
457 * RETURN: None
458 *
459 * DESCRIPTION: Validate various important fields within the FADT. If a problem
460 * is found, issue a message, but no status is returned.
461 * Used by both the table manager and the disassembler.
462 *
463 * Possible additional checks:
464 * (acpi_gbl_FADT.pm1_event_length >= 4)
465 * (acpi_gbl_FADT.pm1_control_length >= 2)
466 * (acpi_gbl_FADT.pm_timer_length >= 4)
467 * Gpe block lengths must be multiple of 2
468 *
469 ******************************************************************************/
470
471static void acpi_tb_validate_fadt(void)
472{
473 char *name;
474 struct acpi_generic_address *address64;
475 u8 length;
476 u32 i;
477
478 /*
479 * Check for FACS and DSDT address mismatches. An address mismatch between
480 * the 32-bit and 64-bit address fields (FIRMWARE_CTRL/X_FIRMWARE_CTRL and
481 * DSDT/X_DSDT) would indicate the presence of two FACS or two DSDT tables.
482 */
483 if (acpi_gbl_FADT.facs &&
484 (acpi_gbl_FADT.Xfacs != (u64) acpi_gbl_FADT.facs)) {
485 ACPI_WARNING((AE_INFO,
486 "32/64X FACS address mismatch in FADT - "
487 "0x%8.8X/0x%8.8X%8.8X, using 32",
488 acpi_gbl_FADT.facs,
489 ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xfacs)));
490
491 acpi_gbl_FADT.Xfacs = (u64) acpi_gbl_FADT.facs;
492 }
493
494 if (acpi_gbl_FADT.dsdt &&
495 (acpi_gbl_FADT.Xdsdt != (u64) acpi_gbl_FADT.dsdt)) {
496 ACPI_WARNING((AE_INFO,
497 "32/64X DSDT address mismatch in FADT - "
498 "0x%8.8X/0x%8.8X%8.8X, using 32",
499 acpi_gbl_FADT.dsdt,
500 ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xdsdt)));
501
502 acpi_gbl_FADT.Xdsdt = (u64) acpi_gbl_FADT.dsdt;
503 }
504
505 /* Examine all of the 64-bit extended address fields (X fields) */
506
507 for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) {
508 /*
509 * Generate pointer to the 64-bit address, get the register
510 * length (width) and the register name
511 */
512 address64 = ACPI_ADD_PTR(struct acpi_generic_address,
513 &acpi_gbl_FADT,
514 fadt_info_table[i].address64);
515 length =
516 *ACPI_ADD_PTR(u8, &acpi_gbl_FADT,
517 fadt_info_table[i].length);
518 name = fadt_info_table[i].name;
519
520 /*
521 * For each extended field, check for length mismatch between the
522 * legacy length field and the corresponding 64-bit X length field.
523 */
524 if (address64->address &&
525 (address64->bit_width != ACPI_MUL_8(length))) {
526 ACPI_WARNING((AE_INFO,
527 "32/64X length mismatch in %s: %u/%u",
528 name, ACPI_MUL_8(length),
529 address64->bit_width));
530 }
531
532 if (fadt_info_table[i].type & ACPI_FADT_REQUIRED) {
533 /*
534 * Field is required (Pm1a_event, Pm1a_control, pm_timer).
535 * Both the address and length must be non-zero.
536 */
537 if (!address64->address || !length) {
538 ACPI_ERROR((AE_INFO,
539 "Required field %s has zero address and/or length:"
540 " 0x%8.8X%8.8X/0x%X",
541 name,
542 ACPI_FORMAT_UINT64(address64->
543 address),
544 length));
545 }
546 } else if (fadt_info_table[i].type & ACPI_FADT_SEPARATE_LENGTH) {
547 /*
548 * Field is optional (PM2Control, GPE0, GPE1) AND has its own
549 * length field. If present, both the address and length must
550 * be valid.
551 */
552 if ((address64->address && !length) ||
553 (!address64->address && length)) {
554 ACPI_WARNING((AE_INFO,
555 "Optional field %s has zero address or length: "
556 "0x%8.8X%8.8X/0x%X",
557 name,
558 ACPI_FORMAT_UINT64(address64->
559 address),
560 length));
561 }
562 }
563 }
564}
565
566/*******************************************************************************
567 *
568 * FUNCTION: acpi_tb_setup_fadt_registers
569 *
570 * PARAMETERS: None, uses acpi_gbl_FADT.
571 *
572 * RETURN: None
573 *
574 * DESCRIPTION: Initialize global ACPI PM1 register definitions. Optionally,
575 * force FADT register definitions to their default lengths.
576 *
577 ******************************************************************************/
578
579static void acpi_tb_setup_fadt_registers(void)
580{
581 struct acpi_generic_address *target64;
582 struct acpi_generic_address *source64;
583 u8 pm1_register_byte_width;
584 u32 i;
585
586 /*
587 * Optionally check all register lengths against the default values and
588 * update them if they are incorrect.
589 */
590 if (acpi_gbl_use_default_register_widths) {
591 for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) {
592 target64 =
593 ACPI_ADD_PTR(struct acpi_generic_address,
594 &acpi_gbl_FADT,
595 fadt_info_table[i].address64);
596
597 /*
598 * If a valid register (Address != 0) and the (default_length > 0)
599 * (Not a GPE register), then check the width against the default.
600 */
601 if ((target64->address) &&
602 (fadt_info_table[i].default_length > 0) &&
603 (fadt_info_table[i].default_length !=
604 target64->bit_width)) {
605 ACPI_WARNING((AE_INFO,
606 "Invalid length for %s: %u, using default %u",
607 fadt_info_table[i].name,
608 target64->bit_width,
609 fadt_info_table[i].
610 default_length));
611
612 /* Incorrect size, set width to the default */
613
614 target64->bit_width =
615 fadt_info_table[i].default_length;
616 }
617 }
618 }
619
620 /*
621 * Get the length of the individual PM1 registers (enable and status).
622 * Each register is defined to be (event block length / 2). Extra divide
623 * by 8 converts bits to bytes.
624 */
625 pm1_register_byte_width = (u8)
626 ACPI_DIV_16(acpi_gbl_FADT.xpm1a_event_block.bit_width);
627
628 /*
629 * Calculate separate GAS structs for the PM1x (A/B) Status and Enable
630 * registers. These addresses do not appear (directly) in the FADT, so it
631 * is useful to pre-calculate them from the PM1 Event Block definitions.
632 *
633 * The PM event blocks are split into two register blocks, first is the
634 * PM Status Register block, followed immediately by the PM Enable
635 * Register block. Each is of length (pm1_event_length/2)
636 *
637 * Note: The PM1A event block is required by the ACPI specification.
638 * However, the PM1B event block is optional and is rarely, if ever,
639 * used.
640 */
641
642 for (i = 0; i < ACPI_FADT_PM_INFO_ENTRIES; i++) {
643 source64 =
644 ACPI_ADD_PTR(struct acpi_generic_address, &acpi_gbl_FADT,
645 fadt_pm_info_table[i].source);
646
647 if (source64->address) {
648 acpi_tb_init_generic_address(fadt_pm_info_table[i].
649 target, source64->space_id,
650 pm1_register_byte_width,
651 source64->address +
652 (fadt_pm_info_table[i].
653 register_num *
654 pm1_register_byte_width));
655 }
656 }
657}
1/******************************************************************************
2 *
3 * Module Name: tbfadt - FADT table utilities
4 *
5 *****************************************************************************/
6
7/*
8 * Copyright (C) 2000 - 2016, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44#include <acpi/acpi.h>
45#include "accommon.h"
46#include "actables.h"
47
48#define _COMPONENT ACPI_TABLES
49ACPI_MODULE_NAME("tbfadt")
50
51/* Local prototypes */
52static void
53acpi_tb_init_generic_address(struct acpi_generic_address *generic_address,
54 u8 space_id,
55 u8 byte_width,
56 u64 address, char *register_name, u8 flags);
57
58static void acpi_tb_convert_fadt(void);
59
60static void acpi_tb_setup_fadt_registers(void);
61
62static u64
63acpi_tb_select_address(char *register_name, u32 address32, u64 address64);
64
65/* Table for conversion of FADT to common internal format and FADT validation */
66
67typedef struct acpi_fadt_info {
68 char *name;
69 u16 address64;
70 u16 address32;
71 u16 length;
72 u8 default_length;
73 u8 flags;
74
75} acpi_fadt_info;
76
77#define ACPI_FADT_OPTIONAL 0
78#define ACPI_FADT_REQUIRED 1
79#define ACPI_FADT_SEPARATE_LENGTH 2
80#define ACPI_FADT_GPE_REGISTER 4
81
82static struct acpi_fadt_info fadt_info_table[] = {
83 {"Pm1aEventBlock",
84 ACPI_FADT_OFFSET(xpm1a_event_block),
85 ACPI_FADT_OFFSET(pm1a_event_block),
86 ACPI_FADT_OFFSET(pm1_event_length),
87 ACPI_PM1_REGISTER_WIDTH * 2, /* Enable + Status register */
88 ACPI_FADT_REQUIRED},
89
90 {"Pm1bEventBlock",
91 ACPI_FADT_OFFSET(xpm1b_event_block),
92 ACPI_FADT_OFFSET(pm1b_event_block),
93 ACPI_FADT_OFFSET(pm1_event_length),
94 ACPI_PM1_REGISTER_WIDTH * 2, /* Enable + Status register */
95 ACPI_FADT_OPTIONAL},
96
97 {"Pm1aControlBlock",
98 ACPI_FADT_OFFSET(xpm1a_control_block),
99 ACPI_FADT_OFFSET(pm1a_control_block),
100 ACPI_FADT_OFFSET(pm1_control_length),
101 ACPI_PM1_REGISTER_WIDTH,
102 ACPI_FADT_REQUIRED},
103
104 {"Pm1bControlBlock",
105 ACPI_FADT_OFFSET(xpm1b_control_block),
106 ACPI_FADT_OFFSET(pm1b_control_block),
107 ACPI_FADT_OFFSET(pm1_control_length),
108 ACPI_PM1_REGISTER_WIDTH,
109 ACPI_FADT_OPTIONAL},
110
111 {"Pm2ControlBlock",
112 ACPI_FADT_OFFSET(xpm2_control_block),
113 ACPI_FADT_OFFSET(pm2_control_block),
114 ACPI_FADT_OFFSET(pm2_control_length),
115 ACPI_PM2_REGISTER_WIDTH,
116 ACPI_FADT_SEPARATE_LENGTH},
117
118 {"PmTimerBlock",
119 ACPI_FADT_OFFSET(xpm_timer_block),
120 ACPI_FADT_OFFSET(pm_timer_block),
121 ACPI_FADT_OFFSET(pm_timer_length),
122 ACPI_PM_TIMER_WIDTH,
123 ACPI_FADT_SEPARATE_LENGTH}, /* ACPI 5.0A: Timer is optional */
124
125 {"Gpe0Block",
126 ACPI_FADT_OFFSET(xgpe0_block),
127 ACPI_FADT_OFFSET(gpe0_block),
128 ACPI_FADT_OFFSET(gpe0_block_length),
129 0,
130 ACPI_FADT_SEPARATE_LENGTH | ACPI_FADT_GPE_REGISTER},
131
132 {"Gpe1Block",
133 ACPI_FADT_OFFSET(xgpe1_block),
134 ACPI_FADT_OFFSET(gpe1_block),
135 ACPI_FADT_OFFSET(gpe1_block_length),
136 0,
137 ACPI_FADT_SEPARATE_LENGTH | ACPI_FADT_GPE_REGISTER}
138};
139
140#define ACPI_FADT_INFO_ENTRIES \
141 (sizeof (fadt_info_table) / sizeof (struct acpi_fadt_info))
142
143/* Table used to split Event Blocks into separate status/enable registers */
144
145typedef struct acpi_fadt_pm_info {
146 struct acpi_generic_address *target;
147 u16 source;
148 u8 register_num;
149
150} acpi_fadt_pm_info;
151
152static struct acpi_fadt_pm_info fadt_pm_info_table[] = {
153 {&acpi_gbl_xpm1a_status,
154 ACPI_FADT_OFFSET(xpm1a_event_block),
155 0},
156
157 {&acpi_gbl_xpm1a_enable,
158 ACPI_FADT_OFFSET(xpm1a_event_block),
159 1},
160
161 {&acpi_gbl_xpm1b_status,
162 ACPI_FADT_OFFSET(xpm1b_event_block),
163 0},
164
165 {&acpi_gbl_xpm1b_enable,
166 ACPI_FADT_OFFSET(xpm1b_event_block),
167 1}
168};
169
170#define ACPI_FADT_PM_INFO_ENTRIES \
171 (sizeof (fadt_pm_info_table) / sizeof (struct acpi_fadt_pm_info))
172
173/*******************************************************************************
174 *
175 * FUNCTION: acpi_tb_init_generic_address
176 *
177 * PARAMETERS: generic_address - GAS struct to be initialized
178 * space_id - ACPI Space ID for this register
179 * byte_width - Width of this register
180 * address - Address of the register
181 * register_name - ASCII name of the ACPI register
182 *
183 * RETURN: None
184 *
185 * DESCRIPTION: Initialize a Generic Address Structure (GAS)
186 * See the ACPI specification for a full description and
187 * definition of this structure.
188 *
189 ******************************************************************************/
190
191static void
192acpi_tb_init_generic_address(struct acpi_generic_address *generic_address,
193 u8 space_id,
194 u8 byte_width,
195 u64 address, char *register_name, u8 flags)
196{
197 u8 bit_width;
198
199 /*
200 * Bit width field in the GAS is only one byte long, 255 max.
201 * Check for bit_width overflow in GAS.
202 */
203 bit_width = (u8)(byte_width * 8);
204 if (byte_width > 31) { /* (31*8)=248, (32*8)=256 */
205 /*
206 * No error for GPE blocks, because we do not use the bit_width
207 * for GPEs, the legacy length (byte_width) is used instead to
208 * allow for a large number of GPEs.
209 */
210 if (!(flags & ACPI_FADT_GPE_REGISTER)) {
211 ACPI_ERROR((AE_INFO,
212 "%s - 32-bit FADT register is too long (%u bytes, %u bits) "
213 "to convert to GAS struct - 255 bits max, truncating",
214 register_name, byte_width,
215 (byte_width * 8)));
216 }
217
218 bit_width = 255;
219 }
220
221 /*
222 * The 64-bit Address field is non-aligned in the byte packed
223 * GAS struct.
224 */
225 ACPI_MOVE_64_TO_64(&generic_address->address, &address);
226
227 /* All other fields are byte-wide */
228
229 generic_address->space_id = space_id;
230 generic_address->bit_width = bit_width;
231 generic_address->bit_offset = 0;
232 generic_address->access_width = 0; /* Access width ANY */
233}
234
235/*******************************************************************************
236 *
237 * FUNCTION: acpi_tb_select_address
238 *
239 * PARAMETERS: register_name - ASCII name of the ACPI register
240 * address32 - 32-bit address of the register
241 * address64 - 64-bit address of the register
242 *
243 * RETURN: The resolved 64-bit address
244 *
245 * DESCRIPTION: Select between 32-bit and 64-bit versions of addresses within
246 * the FADT. Used for the FACS and DSDT addresses.
247 *
248 * NOTES:
249 *
250 * Check for FACS and DSDT address mismatches. An address mismatch between
251 * the 32-bit and 64-bit address fields (FIRMWARE_CTRL/X_FIRMWARE_CTRL and
252 * DSDT/X_DSDT) could be a corrupted address field or it might indicate
253 * the presence of two FACS or two DSDT tables.
254 *
255 * November 2013:
256 * By default, as per the ACPICA specification, a valid 64-bit address is
257 * used regardless of the value of the 32-bit address. However, this
258 * behavior can be overridden via the acpi_gbl_use32_bit_fadt_addresses flag.
259 *
260 ******************************************************************************/
261
262static u64
263acpi_tb_select_address(char *register_name, u32 address32, u64 address64)
264{
265
266 if (!address64) {
267
268 /* 64-bit address is zero, use 32-bit address */
269
270 return ((u64)address32);
271 }
272
273 if (address32 && (address64 != (u64)address32)) {
274
275 /* Address mismatch between 32-bit and 64-bit versions */
276
277 ACPI_BIOS_WARNING((AE_INFO,
278 "32/64X %s address mismatch in FADT: "
279 "0x%8.8X/0x%8.8X%8.8X, using %u-bit address",
280 register_name, address32,
281 ACPI_FORMAT_UINT64(address64),
282 acpi_gbl_use32_bit_fadt_addresses ? 32 :
283 64));
284
285 /* 32-bit address override */
286
287 if (acpi_gbl_use32_bit_fadt_addresses) {
288 return ((u64)address32);
289 }
290 }
291
292 /* Default is to use the 64-bit address */
293
294 return (address64);
295}
296
297/*******************************************************************************
298 *
299 * FUNCTION: acpi_tb_parse_fadt
300 *
301 * PARAMETERS: None
302 *
303 * RETURN: None
304 *
305 * DESCRIPTION: Initialize the FADT, DSDT and FACS tables
306 * (FADT contains the addresses of the DSDT and FACS)
307 *
308 ******************************************************************************/
309
310void acpi_tb_parse_fadt(void)
311{
312 u32 length;
313 struct acpi_table_header *table;
314
315 /*
316 * The FADT has multiple versions with different lengths,
317 * and it contains pointers to both the DSDT and FACS tables.
318 *
319 * Get a local copy of the FADT and convert it to a common format
320 * Map entire FADT, assumed to be smaller than one page.
321 */
322 length = acpi_gbl_root_table_list.tables[acpi_gbl_fadt_index].length;
323
324 table =
325 acpi_os_map_memory(acpi_gbl_root_table_list.
326 tables[acpi_gbl_fadt_index].address, length);
327 if (!table) {
328 return;
329 }
330
331 /*
332 * Validate the FADT checksum before we copy the table. Ignore
333 * checksum error as we want to try to get the DSDT and FACS.
334 */
335 (void)acpi_tb_verify_checksum(table, length);
336
337 /* Create a local copy of the FADT in common ACPI 2.0+ format */
338
339 acpi_tb_create_local_fadt(table, length);
340
341 /* All done with the real FADT, unmap it */
342
343 acpi_os_unmap_memory(table, length);
344
345 /* Obtain the DSDT and FACS tables via their addresses within the FADT */
346
347 acpi_tb_install_fixed_table((acpi_physical_address) acpi_gbl_FADT.Xdsdt,
348 ACPI_SIG_DSDT, &acpi_gbl_dsdt_index);
349
350 /* If Hardware Reduced flag is set, there is no FACS */
351
352 if (!acpi_gbl_reduced_hardware) {
353 if (acpi_gbl_FADT.facs) {
354 acpi_tb_install_fixed_table((acpi_physical_address)
355 acpi_gbl_FADT.facs,
356 ACPI_SIG_FACS,
357 &acpi_gbl_facs_index);
358 }
359 if (acpi_gbl_FADT.Xfacs) {
360 acpi_tb_install_fixed_table((acpi_physical_address)
361 acpi_gbl_FADT.Xfacs,
362 ACPI_SIG_FACS,
363 &acpi_gbl_xfacs_index);
364 }
365 }
366}
367
368/*******************************************************************************
369 *
370 * FUNCTION: acpi_tb_create_local_fadt
371 *
372 * PARAMETERS: table - Pointer to BIOS FADT
373 * length - Length of the table
374 *
375 * RETURN: None
376 *
377 * DESCRIPTION: Get a local copy of the FADT and convert it to a common format.
378 * Performs validation on some important FADT fields.
379 *
380 * NOTE: We create a local copy of the FADT regardless of the version.
381 *
382 ******************************************************************************/
383
384void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length)
385{
386 /*
387 * Check if the FADT is larger than the largest table that we expect
388 * (the ACPI 5.0 version). If so, truncate the table, and issue
389 * a warning.
390 */
391 if (length > sizeof(struct acpi_table_fadt)) {
392 ACPI_BIOS_WARNING((AE_INFO,
393 "FADT (revision %u) is longer than ACPI 5.0 version, "
394 "truncating length %u to %u",
395 table->revision, length,
396 (u32)sizeof(struct acpi_table_fadt)));
397 }
398
399 /* Clear the entire local FADT */
400
401 memset(&acpi_gbl_FADT, 0, sizeof(struct acpi_table_fadt));
402
403 /* Copy the original FADT, up to sizeof (struct acpi_table_fadt) */
404
405 memcpy(&acpi_gbl_FADT, table,
406 ACPI_MIN(length, sizeof(struct acpi_table_fadt)));
407
408 /* Take a copy of the Hardware Reduced flag */
409
410 acpi_gbl_reduced_hardware = FALSE;
411 if (acpi_gbl_FADT.flags & ACPI_FADT_HW_REDUCED) {
412 acpi_gbl_reduced_hardware = TRUE;
413 }
414
415 /* Convert the local copy of the FADT to the common internal format */
416
417 acpi_tb_convert_fadt();
418
419 /* Initialize the global ACPI register structures */
420
421 acpi_tb_setup_fadt_registers();
422}
423
424/*******************************************************************************
425 *
426 * FUNCTION: acpi_tb_convert_fadt
427 *
428 * PARAMETERS: none - acpi_gbl_FADT is used.
429 *
430 * RETURN: None
431 *
432 * DESCRIPTION: Converts all versions of the FADT to a common internal format.
433 * Expand 32-bit addresses to 64-bit as necessary. Also validate
434 * important fields within the FADT.
435 *
436 * NOTE: acpi_gbl_FADT must be of size (struct acpi_table_fadt), and must
437 * contain a copy of the actual BIOS-provided FADT.
438 *
439 * Notes on 64-bit register addresses:
440 *
441 * After this FADT conversion, later ACPICA code will only use the 64-bit "X"
442 * fields of the FADT for all ACPI register addresses.
443 *
444 * The 64-bit X fields are optional extensions to the original 32-bit FADT
445 * V1.0 fields. Even if they are present in the FADT, they are optional and
446 * are unused if the BIOS sets them to zero. Therefore, we must copy/expand
447 * 32-bit V1.0 fields to the 64-bit X fields if the the 64-bit X field is
448 * originally zero.
449 *
450 * For ACPI 1.0 FADTs (that contain no 64-bit addresses), all 32-bit address
451 * fields are expanded to the corresponding 64-bit X fields in the internal
452 * common FADT.
453 *
454 * For ACPI 2.0+ FADTs, all valid (non-zero) 32-bit address fields are expanded
455 * to the corresponding 64-bit X fields, if the 64-bit field is originally
456 * zero. Adhering to the ACPI specification, we completely ignore the 32-bit
457 * field if the 64-bit field is valid, regardless of whether the host OS is
458 * 32-bit or 64-bit.
459 *
460 * Possible additional checks:
461 * (acpi_gbl_FADT.pm1_event_length >= 4)
462 * (acpi_gbl_FADT.pm1_control_length >= 2)
463 * (acpi_gbl_FADT.pm_timer_length >= 4)
464 * Gpe block lengths must be multiple of 2
465 *
466 ******************************************************************************/
467
468static void acpi_tb_convert_fadt(void)
469{
470 char *name;
471 struct acpi_generic_address *address64;
472 u32 address32;
473 u8 length;
474 u8 flags;
475 u32 i;
476
477 /*
478 * For ACPI 1.0 FADTs (revision 1 or 2), ensure that reserved fields which
479 * should be zero are indeed zero. This will workaround BIOSs that
480 * inadvertently place values in these fields.
481 *
482 * The ACPI 1.0 reserved fields that will be zeroed are the bytes located
483 * at offset 45, 55, 95, and the word located at offset 109, 110.
484 *
485 * Note: The FADT revision value is unreliable. Only the length can be
486 * trusted.
487 */
488 if (acpi_gbl_FADT.header.length <= ACPI_FADT_V2_SIZE) {
489 acpi_gbl_FADT.preferred_profile = 0;
490 acpi_gbl_FADT.pstate_control = 0;
491 acpi_gbl_FADT.cst_control = 0;
492 acpi_gbl_FADT.boot_flags = 0;
493 }
494
495 /*
496 * Now we can update the local FADT length to the length of the
497 * current FADT version as defined by the ACPI specification.
498 * Thus, we will have a common FADT internally.
499 */
500 acpi_gbl_FADT.header.length = sizeof(struct acpi_table_fadt);
501
502 /*
503 * Expand the 32-bit DSDT addresses to 64-bit as necessary.
504 * Later ACPICA code will always use the X 64-bit field.
505 */
506 acpi_gbl_FADT.Xdsdt = acpi_tb_select_address("DSDT",
507 acpi_gbl_FADT.dsdt,
508 acpi_gbl_FADT.Xdsdt);
509
510 /* If Hardware Reduced flag is set, we are all done */
511
512 if (acpi_gbl_reduced_hardware) {
513 return;
514 }
515
516 /* Examine all of the 64-bit extended address fields (X fields) */
517
518 for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) {
519 /*
520 * Get the 32-bit and 64-bit addresses, as well as the register
521 * length and register name.
522 */
523 address32 = *ACPI_ADD_PTR(u32,
524 &acpi_gbl_FADT,
525 fadt_info_table[i].address32);
526
527 address64 = ACPI_ADD_PTR(struct acpi_generic_address,
528 &acpi_gbl_FADT,
529 fadt_info_table[i].address64);
530
531 length = *ACPI_ADD_PTR(u8,
532 &acpi_gbl_FADT,
533 fadt_info_table[i].length);
534
535 name = fadt_info_table[i].name;
536 flags = fadt_info_table[i].flags;
537
538 /*
539 * Expand the ACPI 1.0 32-bit addresses to the ACPI 2.0 64-bit "X"
540 * generic address structures as necessary. Later code will always use
541 * the 64-bit address structures.
542 *
543 * November 2013:
544 * Now always use the 64-bit address if it is valid (non-zero), in
545 * accordance with the ACPI specification which states that a 64-bit
546 * address supersedes the 32-bit version. This behavior can be
547 * overridden by the acpi_gbl_use32_bit_fadt_addresses flag.
548 *
549 * During 64-bit address construction and verification,
550 * these cases are handled:
551 *
552 * Address32 zero, Address64 [don't care] - Use Address64
553 *
554 * Address32 non-zero, Address64 zero - Copy/use Address32
555 * Address32 non-zero == Address64 non-zero - Use Address64
556 * Address32 non-zero != Address64 non-zero - Warning, use Address64
557 *
558 * Override: if acpi_gbl_use32_bit_fadt_addresses is TRUE, and:
559 * Address32 non-zero != Address64 non-zero - Warning, copy/use Address32
560 *
561 * Note: space_id is always I/O for 32-bit legacy address fields
562 */
563 if (address32) {
564 if (!address64->address) {
565
566 /* 64-bit address is zero, use 32-bit address */
567
568 acpi_tb_init_generic_address(address64,
569 ACPI_ADR_SPACE_SYSTEM_IO,
570 *ACPI_ADD_PTR(u8,
571 &acpi_gbl_FADT,
572 fadt_info_table
573 [i].
574 length),
575 (u64)address32,
576 name, flags);
577 } else if (address64->address != (u64)address32) {
578
579 /* Address mismatch */
580
581 ACPI_BIOS_WARNING((AE_INFO,
582 "32/64X address mismatch in FADT/%s: "
583 "0x%8.8X/0x%8.8X%8.8X, using %u-bit address",
584 name, address32,
585 ACPI_FORMAT_UINT64
586 (address64->address),
587 acpi_gbl_use32_bit_fadt_addresses
588 ? 32 : 64));
589
590 if (acpi_gbl_use32_bit_fadt_addresses) {
591
592 /* 32-bit address override */
593
594 acpi_tb_init_generic_address(address64,
595 ACPI_ADR_SPACE_SYSTEM_IO,
596 *ACPI_ADD_PTR
597 (u8,
598 &acpi_gbl_FADT,
599 fadt_info_table
600 [i].
601 length),
602 (u64)
603 address32,
604 name,
605 flags);
606 }
607 }
608 }
609
610 /*
611 * For each extended field, check for length mismatch between the
612 * legacy length field and the corresponding 64-bit X length field.
613 * Note: If the legacy length field is > 0xFF bits, ignore this
614 * check. (GPE registers can be larger than the 64-bit GAS structure
615 * can accomodate, 0xFF bits).
616 */
617 if (address64->address &&
618 (ACPI_MUL_8(length) <= ACPI_UINT8_MAX) &&
619 (address64->bit_width != ACPI_MUL_8(length))) {
620 ACPI_BIOS_WARNING((AE_INFO,
621 "32/64X length mismatch in FADT/%s: %u/%u",
622 name, ACPI_MUL_8(length),
623 address64->bit_width));
624 }
625
626 if (fadt_info_table[i].flags & ACPI_FADT_REQUIRED) {
627 /*
628 * Field is required (Pm1a_event, Pm1a_control).
629 * Both the address and length must be non-zero.
630 */
631 if (!address64->address || !length) {
632 ACPI_BIOS_ERROR((AE_INFO,
633 "Required FADT field %s has zero address and/or length: "
634 "0x%8.8X%8.8X/0x%X",
635 name,
636 ACPI_FORMAT_UINT64(address64->
637 address),
638 length));
639 }
640 } else if (fadt_info_table[i].flags & ACPI_FADT_SEPARATE_LENGTH) {
641 /*
642 * Field is optional (Pm2_control, GPE0, GPE1) AND has its own
643 * length field. If present, both the address and length must
644 * be valid.
645 */
646 if ((address64->address && !length) ||
647 (!address64->address && length)) {
648 ACPI_BIOS_WARNING((AE_INFO,
649 "Optional FADT field %s has zero address or length: "
650 "0x%8.8X%8.8X/0x%X",
651 name,
652 ACPI_FORMAT_UINT64
653 (address64->address),
654 length));
655 }
656 }
657 }
658}
659
660/*******************************************************************************
661 *
662 * FUNCTION: acpi_tb_setup_fadt_registers
663 *
664 * PARAMETERS: None, uses acpi_gbl_FADT.
665 *
666 * RETURN: None
667 *
668 * DESCRIPTION: Initialize global ACPI PM1 register definitions. Optionally,
669 * force FADT register definitions to their default lengths.
670 *
671 ******************************************************************************/
672
673static void acpi_tb_setup_fadt_registers(void)
674{
675 struct acpi_generic_address *target64;
676 struct acpi_generic_address *source64;
677 u8 pm1_register_byte_width;
678 u32 i;
679
680 /*
681 * Optionally check all register lengths against the default values and
682 * update them if they are incorrect.
683 */
684 if (acpi_gbl_use_default_register_widths) {
685 for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) {
686 target64 =
687 ACPI_ADD_PTR(struct acpi_generic_address,
688 &acpi_gbl_FADT,
689 fadt_info_table[i].address64);
690
691 /*
692 * If a valid register (Address != 0) and the (default_length > 0)
693 * (Not a GPE register), then check the width against the default.
694 */
695 if ((target64->address) &&
696 (fadt_info_table[i].default_length > 0) &&
697 (fadt_info_table[i].default_length !=
698 target64->bit_width)) {
699 ACPI_BIOS_WARNING((AE_INFO,
700 "Invalid length for FADT/%s: %u, using default %u",
701 fadt_info_table[i].name,
702 target64->bit_width,
703 fadt_info_table[i].
704 default_length));
705
706 /* Incorrect size, set width to the default */
707
708 target64->bit_width =
709 fadt_info_table[i].default_length;
710 }
711 }
712 }
713
714 /*
715 * Get the length of the individual PM1 registers (enable and status).
716 * Each register is defined to be (event block length / 2). Extra divide
717 * by 8 converts bits to bytes.
718 */
719 pm1_register_byte_width = (u8)
720 ACPI_DIV_16(acpi_gbl_FADT.xpm1a_event_block.bit_width);
721
722 /*
723 * Calculate separate GAS structs for the PM1x (A/B) Status and Enable
724 * registers. These addresses do not appear (directly) in the FADT, so it
725 * is useful to pre-calculate them from the PM1 Event Block definitions.
726 *
727 * The PM event blocks are split into two register blocks, first is the
728 * PM Status Register block, followed immediately by the PM Enable
729 * Register block. Each is of length (pm1_event_length/2)
730 *
731 * Note: The PM1A event block is required by the ACPI specification.
732 * However, the PM1B event block is optional and is rarely, if ever,
733 * used.
734 */
735
736 for (i = 0; i < ACPI_FADT_PM_INFO_ENTRIES; i++) {
737 source64 =
738 ACPI_ADD_PTR(struct acpi_generic_address, &acpi_gbl_FADT,
739 fadt_pm_info_table[i].source);
740
741 if (source64->address) {
742 acpi_tb_init_generic_address(fadt_pm_info_table[i].
743 target, source64->space_id,
744 pm1_register_byte_width,
745 source64->address +
746 (fadt_pm_info_table[i].
747 register_num *
748 pm1_register_byte_width),
749 "PmRegisters", 0);
750 }
751 }
752}