Loading...
1/*
2 * OpenRISC setup.c
3 *
4 * Linux architectural port borrowing liberally from similar works of
5 * others. All original copyrights apply as per the original source
6 * declaration.
7 *
8 * Modifications for the OpenRISC architecture:
9 * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
10 * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
11 *
12 * This program is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License
14 * as published by the Free Software Foundation; either version
15 * 2 of the License, or (at your option) any later version.
16 *
17 * This file handles the architecture-dependent parts of initialization
18 */
19
20#include <linux/errno.h>
21#include <linux/sched.h>
22#include <linux/kernel.h>
23#include <linux/mm.h>
24#include <linux/stddef.h>
25#include <linux/unistd.h>
26#include <linux/ptrace.h>
27#include <linux/slab.h>
28#include <linux/tty.h>
29#include <linux/ioport.h>
30#include <linux/delay.h>
31#include <linux/console.h>
32#include <linux/init.h>
33#include <linux/bootmem.h>
34#include <linux/seq_file.h>
35#include <linux/serial.h>
36#include <linux/initrd.h>
37#include <linux/of_fdt.h>
38#include <linux/of.h>
39#include <linux/memblock.h>
40#include <linux/device.h>
41#include <linux/of_platform.h>
42
43#include <asm/segment.h>
44#include <asm/system.h>
45#include <asm/pgtable.h>
46#include <asm/types.h>
47#include <asm/setup.h>
48#include <asm/io.h>
49#include <asm/cpuinfo.h>
50#include <asm/delay.h>
51
52#include "vmlinux.h"
53
54char __initdata cmd_line[COMMAND_LINE_SIZE] = CONFIG_CMDLINE;
55
56static unsigned long __init setup_memory(void)
57{
58 unsigned long bootmap_size;
59 unsigned long ram_start_pfn;
60 unsigned long free_ram_start_pfn;
61 unsigned long ram_end_pfn;
62 phys_addr_t memory_start, memory_end;
63 struct memblock_region *region;
64
65 memory_end = memory_start = 0;
66
67 /* Find main memory where is the kernel */
68 for_each_memblock(memory, region) {
69 memory_start = region->base;
70 memory_end = region->base + region->size;
71 printk(KERN_INFO "%s: Memory: 0x%x-0x%x\n", __func__,
72 memory_start, memory_end);
73 }
74
75 if (!memory_end) {
76 panic("No memory!");
77 }
78
79 ram_start_pfn = PFN_UP(memory_start);
80 /* free_ram_start_pfn is first page after kernel */
81 free_ram_start_pfn = PFN_UP(__pa(&_end));
82 ram_end_pfn = PFN_DOWN(memblock_end_of_DRAM());
83
84 max_pfn = ram_end_pfn;
85
86 /*
87 * initialize the boot-time allocator (with low memory only).
88 *
89 * This makes the memory from the end of the kernel to the end of
90 * RAM usable.
91 * init_bootmem sets the global values min_low_pfn, max_low_pfn.
92 */
93 bootmap_size = init_bootmem(free_ram_start_pfn,
94 ram_end_pfn - ram_start_pfn);
95 free_bootmem(PFN_PHYS(free_ram_start_pfn),
96 (ram_end_pfn - free_ram_start_pfn) << PAGE_SHIFT);
97 reserve_bootmem(PFN_PHYS(free_ram_start_pfn), bootmap_size,
98 BOOTMEM_DEFAULT);
99
100 for_each_memblock(reserved, region) {
101 printk(KERN_INFO "Reserved - 0x%08x-0x%08x\n",
102 (u32) region->base, (u32) region->size);
103 reserve_bootmem(region->base, region->size, BOOTMEM_DEFAULT);
104 }
105
106 return ram_end_pfn;
107}
108
109struct cpuinfo cpuinfo;
110
111static void print_cpuinfo(void)
112{
113 unsigned long upr = mfspr(SPR_UPR);
114 unsigned long vr = mfspr(SPR_VR);
115 unsigned int version;
116 unsigned int revision;
117
118 version = (vr & SPR_VR_VER) >> 24;
119 revision = (vr & SPR_VR_REV);
120
121 printk(KERN_INFO "CPU: OpenRISC-%x (revision %d) @%d MHz\n",
122 version, revision, cpuinfo.clock_frequency / 1000000);
123
124 if (!(upr & SPR_UPR_UP)) {
125 printk(KERN_INFO
126 "-- no UPR register... unable to detect configuration\n");
127 return;
128 }
129
130 if (upr & SPR_UPR_DCP)
131 printk(KERN_INFO
132 "-- dcache: %4d bytes total, %2d bytes/line, %d way(s)\n",
133 cpuinfo.dcache_size, cpuinfo.dcache_block_size, 1);
134 else
135 printk(KERN_INFO "-- dcache disabled\n");
136 if (upr & SPR_UPR_ICP)
137 printk(KERN_INFO
138 "-- icache: %4d bytes total, %2d bytes/line, %d way(s)\n",
139 cpuinfo.icache_size, cpuinfo.icache_block_size, 1);
140 else
141 printk(KERN_INFO "-- icache disabled\n");
142
143 if (upr & SPR_UPR_DMP)
144 printk(KERN_INFO "-- dmmu: %4d entries, %lu way(s)\n",
145 1 << ((mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTS) >> 2),
146 1 + (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTW));
147 if (upr & SPR_UPR_IMP)
148 printk(KERN_INFO "-- immu: %4d entries, %lu way(s)\n",
149 1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> 2),
150 1 + (mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTW));
151
152 printk(KERN_INFO "-- additional features:\n");
153 if (upr & SPR_UPR_DUP)
154 printk(KERN_INFO "-- debug unit\n");
155 if (upr & SPR_UPR_PCUP)
156 printk(KERN_INFO "-- performance counters\n");
157 if (upr & SPR_UPR_PMP)
158 printk(KERN_INFO "-- power management\n");
159 if (upr & SPR_UPR_PICP)
160 printk(KERN_INFO "-- PIC\n");
161 if (upr & SPR_UPR_TTP)
162 printk(KERN_INFO "-- timer\n");
163 if (upr & SPR_UPR_CUP)
164 printk(KERN_INFO "-- custom unit(s)\n");
165}
166
167void __init setup_cpuinfo(void)
168{
169 struct device_node *cpu;
170 unsigned long iccfgr, dccfgr;
171 unsigned long cache_set_size, cache_ways;
172
173 cpu = of_find_compatible_node(NULL, NULL, "opencores,or1200-rtlsvn481");
174 if (!cpu)
175 panic("No compatible CPU found in device tree...\n");
176
177 iccfgr = mfspr(SPR_ICCFGR);
178 cache_ways = 1 << (iccfgr & SPR_ICCFGR_NCW);
179 cache_set_size = 1 << ((iccfgr & SPR_ICCFGR_NCS) >> 3);
180 cpuinfo.icache_block_size = 16 << ((iccfgr & SPR_ICCFGR_CBS) >> 7);
181 cpuinfo.icache_size =
182 cache_set_size * cache_ways * cpuinfo.icache_block_size;
183
184 dccfgr = mfspr(SPR_DCCFGR);
185 cache_ways = 1 << (dccfgr & SPR_DCCFGR_NCW);
186 cache_set_size = 1 << ((dccfgr & SPR_DCCFGR_NCS) >> 3);
187 cpuinfo.dcache_block_size = 16 << ((dccfgr & SPR_DCCFGR_CBS) >> 7);
188 cpuinfo.dcache_size =
189 cache_set_size * cache_ways * cpuinfo.dcache_block_size;
190
191 if (of_property_read_u32(cpu, "clock-frequency",
192 &cpuinfo.clock_frequency)) {
193 printk(KERN_WARNING
194 "Device tree missing CPU 'clock-frequency' parameter."
195 "Assuming frequency 25MHZ"
196 "This is probably not what you want.");
197 }
198
199 of_node_put(cpu);
200
201 print_cpuinfo();
202}
203
204/**
205 * or32_early_setup
206 *
207 * Handles the pointer to the device tree that this kernel is to use
208 * for establishing the available platform devices.
209 *
210 * For now, this is limited to using the built-in device tree. In the future,
211 * it is intended that this function will take a pointer to the device tree
212 * that is potentially built-in, but potentially also passed in by the
213 * bootloader, or discovered by some equally clever means...
214 */
215
216void __init or32_early_setup(void)
217{
218
219 early_init_devtree(__dtb_start);
220
221 printk(KERN_INFO "Compiled-in FDT at 0x%p\n", __dtb_start);
222}
223
224static int __init openrisc_device_probe(void)
225{
226 of_platform_populate(NULL, NULL, NULL, NULL);
227
228 return 0;
229}
230
231device_initcall(openrisc_device_probe);
232
233static inline unsigned long extract_value_bits(unsigned long reg,
234 short bit_nr, short width)
235{
236 return (reg >> bit_nr) & (0 << width);
237}
238
239static inline unsigned long extract_value(unsigned long reg, unsigned long mask)
240{
241 while (!(mask & 0x1)) {
242 reg = reg >> 1;
243 mask = mask >> 1;
244 }
245 return mask & reg;
246}
247
248void __init detect_unit_config(unsigned long upr, unsigned long mask,
249 char *text, void (*func) (void))
250{
251 if (text != NULL)
252 printk("%s", text);
253
254 if (upr & mask) {
255 if (func != NULL)
256 func();
257 else
258 printk("present\n");
259 } else
260 printk("not present\n");
261}
262
263/*
264 * calibrate_delay
265 *
266 * Lightweight calibrate_delay implementation that calculates loops_per_jiffy
267 * from the clock frequency passed in via the device tree
268 *
269 */
270
271void __cpuinit calibrate_delay(void)
272{
273 const int *val;
274 struct device_node *cpu = NULL;
275 cpu = of_find_compatible_node(NULL, NULL, "opencores,or1200-rtlsvn481");
276 val = of_get_property(cpu, "clock-frequency", NULL);
277 if (!val)
278 panic("no cpu 'clock-frequency' parameter in device tree");
279 loops_per_jiffy = *val / HZ;
280 pr_cont("%lu.%02lu BogoMIPS (lpj=%lu)\n",
281 loops_per_jiffy / (500000 / HZ),
282 (loops_per_jiffy / (5000 / HZ)) % 100, loops_per_jiffy);
283}
284
285void __init setup_arch(char **cmdline_p)
286{
287 unsigned long max_low_pfn;
288
289 unflatten_device_tree();
290
291 setup_cpuinfo();
292
293 /* process 1's initial memory region is the kernel code/data */
294 init_mm.start_code = (unsigned long)&_stext;
295 init_mm.end_code = (unsigned long)&_etext;
296 init_mm.end_data = (unsigned long)&_edata;
297 init_mm.brk = (unsigned long)&_end;
298
299#ifdef CONFIG_BLK_DEV_INITRD
300 initrd_start = (unsigned long)&__initrd_start;
301 initrd_end = (unsigned long)&__initrd_end;
302 if (initrd_start == initrd_end) {
303 initrd_start = 0;
304 initrd_end = 0;
305 }
306 initrd_below_start_ok = 1;
307#endif
308
309 /* setup bootmem allocator */
310 max_low_pfn = setup_memory();
311
312 /* paging_init() sets up the MMU and marks all pages as reserved */
313 paging_init();
314
315#if defined(CONFIG_VT) && defined(CONFIG_DUMMY_CONSOLE)
316 if (!conswitchp)
317 conswitchp = &dummy_con;
318#endif
319
320 *cmdline_p = cmd_line;
321
322 printk(KERN_INFO "OpenRISC Linux -- http://openrisc.net\n");
323}
324
325static int show_cpuinfo(struct seq_file *m, void *v)
326{
327 unsigned long vr;
328 int version, revision;
329
330 vr = mfspr(SPR_VR);
331 version = (vr & SPR_VR_VER) >> 24;
332 revision = vr & SPR_VR_REV;
333
334 return seq_printf(m,
335 "cpu\t\t: OpenRISC-%x\n"
336 "revision\t: %d\n"
337 "frequency\t: %ld\n"
338 "dcache size\t: %d bytes\n"
339 "dcache block size\t: %d bytes\n"
340 "icache size\t: %d bytes\n"
341 "icache block size\t: %d bytes\n"
342 "immu\t\t: %d entries, %lu ways\n"
343 "dmmu\t\t: %d entries, %lu ways\n"
344 "bogomips\t: %lu.%02lu\n",
345 version,
346 revision,
347 loops_per_jiffy * HZ,
348 cpuinfo.dcache_size,
349 cpuinfo.dcache_block_size,
350 cpuinfo.icache_size,
351 cpuinfo.icache_block_size,
352 1 << ((mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTS) >> 2),
353 1 + (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTW),
354 1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> 2),
355 1 + (mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTW),
356 (loops_per_jiffy * HZ) / 500000,
357 ((loops_per_jiffy * HZ) / 5000) % 100);
358}
359
360static void *c_start(struct seq_file *m, loff_t * pos)
361{
362 /* We only have one CPU... */
363 return *pos < 1 ? (void *)1 : NULL;
364}
365
366static void *c_next(struct seq_file *m, void *v, loff_t * pos)
367{
368 ++*pos;
369 return NULL;
370}
371
372static void c_stop(struct seq_file *m, void *v)
373{
374}
375
376const struct seq_operations cpuinfo_op = {
377 .start = c_start,
378 .next = c_next,
379 .stop = c_stop,
380 .show = show_cpuinfo,
381};
1/*
2 * OpenRISC setup.c
3 *
4 * Linux architectural port borrowing liberally from similar works of
5 * others. All original copyrights apply as per the original source
6 * declaration.
7 *
8 * Modifications for the OpenRISC architecture:
9 * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
10 * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
11 *
12 * This program is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License
14 * as published by the Free Software Foundation; either version
15 * 2 of the License, or (at your option) any later version.
16 *
17 * This file handles the architecture-dependent parts of initialization
18 */
19
20#include <linux/errno.h>
21#include <linux/sched.h>
22#include <linux/kernel.h>
23#include <linux/mm.h>
24#include <linux/stddef.h>
25#include <linux/unistd.h>
26#include <linux/ptrace.h>
27#include <linux/slab.h>
28#include <linux/tty.h>
29#include <linux/ioport.h>
30#include <linux/delay.h>
31#include <linux/console.h>
32#include <linux/init.h>
33#include <linux/bootmem.h>
34#include <linux/seq_file.h>
35#include <linux/serial.h>
36#include <linux/initrd.h>
37#include <linux/of_fdt.h>
38#include <linux/of.h>
39#include <linux/memblock.h>
40#include <linux/device.h>
41#include <linux/of_platform.h>
42
43#include <asm/sections.h>
44#include <asm/segment.h>
45#include <asm/pgtable.h>
46#include <asm/types.h>
47#include <asm/setup.h>
48#include <asm/io.h>
49#include <asm/cpuinfo.h>
50#include <asm/delay.h>
51
52#include "vmlinux.h"
53
54static unsigned long __init setup_memory(void)
55{
56 unsigned long bootmap_size;
57 unsigned long ram_start_pfn;
58 unsigned long free_ram_start_pfn;
59 unsigned long ram_end_pfn;
60 phys_addr_t memory_start, memory_end;
61 struct memblock_region *region;
62
63 memory_end = memory_start = 0;
64
65 /* Find main memory where is the kernel */
66 for_each_memblock(memory, region) {
67 memory_start = region->base;
68 memory_end = region->base + region->size;
69 printk(KERN_INFO "%s: Memory: 0x%x-0x%x\n", __func__,
70 memory_start, memory_end);
71 }
72
73 if (!memory_end) {
74 panic("No memory!");
75 }
76
77 ram_start_pfn = PFN_UP(memory_start);
78 /* free_ram_start_pfn is first page after kernel */
79 free_ram_start_pfn = PFN_UP(__pa(_end));
80 ram_end_pfn = PFN_DOWN(memblock_end_of_DRAM());
81
82 max_pfn = ram_end_pfn;
83
84 /*
85 * initialize the boot-time allocator (with low memory only).
86 *
87 * This makes the memory from the end of the kernel to the end of
88 * RAM usable.
89 * init_bootmem sets the global values min_low_pfn, max_low_pfn.
90 */
91 bootmap_size = init_bootmem(free_ram_start_pfn,
92 ram_end_pfn - ram_start_pfn);
93 free_bootmem(PFN_PHYS(free_ram_start_pfn),
94 (ram_end_pfn - free_ram_start_pfn) << PAGE_SHIFT);
95 reserve_bootmem(PFN_PHYS(free_ram_start_pfn), bootmap_size,
96 BOOTMEM_DEFAULT);
97
98 for_each_memblock(reserved, region) {
99 printk(KERN_INFO "Reserved - 0x%08x-0x%08x\n",
100 (u32) region->base, (u32) region->size);
101 reserve_bootmem(region->base, region->size, BOOTMEM_DEFAULT);
102 }
103
104 return ram_end_pfn;
105}
106
107struct cpuinfo cpuinfo;
108
109static void print_cpuinfo(void)
110{
111 unsigned long upr = mfspr(SPR_UPR);
112 unsigned long vr = mfspr(SPR_VR);
113 unsigned int version;
114 unsigned int revision;
115
116 version = (vr & SPR_VR_VER) >> 24;
117 revision = (vr & SPR_VR_REV);
118
119 printk(KERN_INFO "CPU: OpenRISC-%x (revision %d) @%d MHz\n",
120 version, revision, cpuinfo.clock_frequency / 1000000);
121
122 if (!(upr & SPR_UPR_UP)) {
123 printk(KERN_INFO
124 "-- no UPR register... unable to detect configuration\n");
125 return;
126 }
127
128 if (upr & SPR_UPR_DCP)
129 printk(KERN_INFO
130 "-- dcache: %4d bytes total, %2d bytes/line, %d way(s)\n",
131 cpuinfo.dcache_size, cpuinfo.dcache_block_size, 1);
132 else
133 printk(KERN_INFO "-- dcache disabled\n");
134 if (upr & SPR_UPR_ICP)
135 printk(KERN_INFO
136 "-- icache: %4d bytes total, %2d bytes/line, %d way(s)\n",
137 cpuinfo.icache_size, cpuinfo.icache_block_size, 1);
138 else
139 printk(KERN_INFO "-- icache disabled\n");
140
141 if (upr & SPR_UPR_DMP)
142 printk(KERN_INFO "-- dmmu: %4d entries, %lu way(s)\n",
143 1 << ((mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTS) >> 2),
144 1 + (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTW));
145 if (upr & SPR_UPR_IMP)
146 printk(KERN_INFO "-- immu: %4d entries, %lu way(s)\n",
147 1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> 2),
148 1 + (mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTW));
149
150 printk(KERN_INFO "-- additional features:\n");
151 if (upr & SPR_UPR_DUP)
152 printk(KERN_INFO "-- debug unit\n");
153 if (upr & SPR_UPR_PCUP)
154 printk(KERN_INFO "-- performance counters\n");
155 if (upr & SPR_UPR_PMP)
156 printk(KERN_INFO "-- power management\n");
157 if (upr & SPR_UPR_PICP)
158 printk(KERN_INFO "-- PIC\n");
159 if (upr & SPR_UPR_TTP)
160 printk(KERN_INFO "-- timer\n");
161 if (upr & SPR_UPR_CUP)
162 printk(KERN_INFO "-- custom unit(s)\n");
163}
164
165void __init setup_cpuinfo(void)
166{
167 struct device_node *cpu;
168 unsigned long iccfgr, dccfgr;
169 unsigned long cache_set_size, cache_ways;
170
171 cpu = of_find_compatible_node(NULL, NULL, "opencores,or1200-rtlsvn481");
172 if (!cpu)
173 panic("No compatible CPU found in device tree...\n");
174
175 iccfgr = mfspr(SPR_ICCFGR);
176 cache_ways = 1 << (iccfgr & SPR_ICCFGR_NCW);
177 cache_set_size = 1 << ((iccfgr & SPR_ICCFGR_NCS) >> 3);
178 cpuinfo.icache_block_size = 16 << ((iccfgr & SPR_ICCFGR_CBS) >> 7);
179 cpuinfo.icache_size =
180 cache_set_size * cache_ways * cpuinfo.icache_block_size;
181
182 dccfgr = mfspr(SPR_DCCFGR);
183 cache_ways = 1 << (dccfgr & SPR_DCCFGR_NCW);
184 cache_set_size = 1 << ((dccfgr & SPR_DCCFGR_NCS) >> 3);
185 cpuinfo.dcache_block_size = 16 << ((dccfgr & SPR_DCCFGR_CBS) >> 7);
186 cpuinfo.dcache_size =
187 cache_set_size * cache_ways * cpuinfo.dcache_block_size;
188
189 if (of_property_read_u32(cpu, "clock-frequency",
190 &cpuinfo.clock_frequency)) {
191 printk(KERN_WARNING
192 "Device tree missing CPU 'clock-frequency' parameter."
193 "Assuming frequency 25MHZ"
194 "This is probably not what you want.");
195 }
196
197 of_node_put(cpu);
198
199 print_cpuinfo();
200}
201
202/**
203 * or32_early_setup
204 *
205 * Handles the pointer to the device tree that this kernel is to use
206 * for establishing the available platform devices.
207 *
208 * Falls back on built-in device tree in case null pointer is passed.
209 */
210
211void __init or32_early_setup(void *fdt)
212{
213 if (fdt)
214 pr_info("FDT at %p\n", fdt);
215 else {
216 fdt = __dtb_start;
217 pr_info("Compiled-in FDT at %p\n", fdt);
218 }
219 early_init_devtree(fdt);
220}
221
222static int __init openrisc_device_probe(void)
223{
224 of_platform_populate(NULL, NULL, NULL, NULL);
225
226 return 0;
227}
228
229device_initcall(openrisc_device_probe);
230
231static inline unsigned long extract_value_bits(unsigned long reg,
232 short bit_nr, short width)
233{
234 return (reg >> bit_nr) & (0 << width);
235}
236
237static inline unsigned long extract_value(unsigned long reg, unsigned long mask)
238{
239 while (!(mask & 0x1)) {
240 reg = reg >> 1;
241 mask = mask >> 1;
242 }
243 return mask & reg;
244}
245
246void __init detect_unit_config(unsigned long upr, unsigned long mask,
247 char *text, void (*func) (void))
248{
249 if (text != NULL)
250 printk("%s", text);
251
252 if (upr & mask) {
253 if (func != NULL)
254 func();
255 else
256 printk("present\n");
257 } else
258 printk("not present\n");
259}
260
261/*
262 * calibrate_delay
263 *
264 * Lightweight calibrate_delay implementation that calculates loops_per_jiffy
265 * from the clock frequency passed in via the device tree
266 *
267 */
268
269void calibrate_delay(void)
270{
271 const int *val;
272 struct device_node *cpu = NULL;
273 cpu = of_find_compatible_node(NULL, NULL, "opencores,or1200-rtlsvn481");
274 val = of_get_property(cpu, "clock-frequency", NULL);
275 if (!val)
276 panic("no cpu 'clock-frequency' parameter in device tree");
277 loops_per_jiffy = *val / HZ;
278 pr_cont("%lu.%02lu BogoMIPS (lpj=%lu)\n",
279 loops_per_jiffy / (500000 / HZ),
280 (loops_per_jiffy / (5000 / HZ)) % 100, loops_per_jiffy);
281}
282
283void __init setup_arch(char **cmdline_p)
284{
285 unsigned long max_low_pfn;
286
287 unflatten_and_copy_device_tree();
288
289 setup_cpuinfo();
290
291 /* process 1's initial memory region is the kernel code/data */
292 init_mm.start_code = (unsigned long)_stext;
293 init_mm.end_code = (unsigned long)_etext;
294 init_mm.end_data = (unsigned long)_edata;
295 init_mm.brk = (unsigned long)_end;
296
297#ifdef CONFIG_BLK_DEV_INITRD
298 initrd_start = (unsigned long)&__initrd_start;
299 initrd_end = (unsigned long)&__initrd_end;
300 if (initrd_start == initrd_end) {
301 initrd_start = 0;
302 initrd_end = 0;
303 }
304 initrd_below_start_ok = 1;
305#endif
306
307 /* setup bootmem allocator */
308 max_low_pfn = setup_memory();
309
310 /* paging_init() sets up the MMU and marks all pages as reserved */
311 paging_init();
312
313#if defined(CONFIG_VT) && defined(CONFIG_DUMMY_CONSOLE)
314 if (!conswitchp)
315 conswitchp = &dummy_con;
316#endif
317
318 *cmdline_p = boot_command_line;
319
320 printk(KERN_INFO "OpenRISC Linux -- http://openrisc.net\n");
321}
322
323static int show_cpuinfo(struct seq_file *m, void *v)
324{
325 unsigned long vr;
326 int version, revision;
327
328 vr = mfspr(SPR_VR);
329 version = (vr & SPR_VR_VER) >> 24;
330 revision = vr & SPR_VR_REV;
331
332 seq_printf(m,
333 "cpu\t\t: OpenRISC-%x\n"
334 "revision\t: %d\n"
335 "frequency\t: %ld\n"
336 "dcache size\t: %d bytes\n"
337 "dcache block size\t: %d bytes\n"
338 "icache size\t: %d bytes\n"
339 "icache block size\t: %d bytes\n"
340 "immu\t\t: %d entries, %lu ways\n"
341 "dmmu\t\t: %d entries, %lu ways\n"
342 "bogomips\t: %lu.%02lu\n",
343 version,
344 revision,
345 loops_per_jiffy * HZ,
346 cpuinfo.dcache_size,
347 cpuinfo.dcache_block_size,
348 cpuinfo.icache_size,
349 cpuinfo.icache_block_size,
350 1 << ((mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTS) >> 2),
351 1 + (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTW),
352 1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> 2),
353 1 + (mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTW),
354 (loops_per_jiffy * HZ) / 500000,
355 ((loops_per_jiffy * HZ) / 5000) % 100);
356
357 return 0;
358}
359
360static void *c_start(struct seq_file *m, loff_t * pos)
361{
362 /* We only have one CPU... */
363 return *pos < 1 ? (void *)1 : NULL;
364}
365
366static void *c_next(struct seq_file *m, void *v, loff_t * pos)
367{
368 ++*pos;
369 return NULL;
370}
371
372static void c_stop(struct seq_file *m, void *v)
373{
374}
375
376const struct seq_operations cpuinfo_op = {
377 .start = c_start,
378 .next = c_next,
379 .stop = c_stop,
380 .show = show_cpuinfo,
381};