Loading...
1/*
2 * r2300_switch.S: R2300 specific task switching code.
3 *
4 * Copyright (C) 1994, 1995, 1996, 1999 by Ralf Baechle
5 * Copyright (C) 1994, 1995, 1996 by Andreas Busse
6 *
7 * Multi-cpu abstraction and macros for easier reading:
8 * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
9 *
10 * Further modifications to make this work:
11 * Copyright (c) 1998-2000 Harald Koerfgen
12 */
13#include <asm/asm.h>
14#include <asm/cachectl.h>
15#include <asm/fpregdef.h>
16#include <asm/mipsregs.h>
17#include <asm/asm-offsets.h>
18#include <asm/page.h>
19#include <asm/regdef.h>
20#include <asm/stackframe.h>
21#include <asm/thread_info.h>
22
23#include <asm/asmmacro.h>
24
25 .set mips1
26 .align 5
27
28/*
29 * Offset to the current process status flags, the first 32 bytes of the
30 * stack are not used.
31 */
32#define ST_OFF (_THREAD_SIZE - 32 - PT_SIZE + PT_STATUS)
33
34/*
35 * FPU context is saved iff the process has used it's FPU in the current
36 * time slice as indicated by TIF_USEDFPU. In any case, the CU1 bit for user
37 * space STATUS register should be 0, so that a process *always* starts its
38 * userland with FPU disabled after each context switch.
39 *
40 * FPU will be enabled as soon as the process accesses FPU again, through
41 * do_cpu() trap.
42 */
43
44/*
45 * task_struct *resume(task_struct *prev, task_struct *next,
46 * struct thread_info *next_ti) )
47 */
48LEAF(resume)
49 mfc0 t1, CP0_STATUS
50 sw t1, THREAD_STATUS(a0)
51 cpu_save_nonscratch a0
52 sw ra, THREAD_REG31(a0)
53
54 /*
55 * check if we need to save FPU registers
56 */
57 lw t3, TASK_THREAD_INFO(a0)
58 lw t0, TI_FLAGS(t3)
59 li t1, _TIF_USEDFPU
60 and t2, t0, t1
61 beqz t2, 1f
62 nor t1, zero, t1
63
64 and t0, t0, t1
65 sw t0, TI_FLAGS(t3)
66
67 /*
68 * clear saved user stack CU1 bit
69 */
70 lw t0, ST_OFF(t3)
71 li t1, ~ST0_CU1
72 and t0, t0, t1
73 sw t0, ST_OFF(t3)
74
75 fpu_save_single a0, t0 # clobbers t0
76
771:
78 /*
79 * The order of restoring the registers takes care of the race
80 * updating $28, $29 and kernelsp without disabling ints.
81 */
82 move $28, a2
83 cpu_restore_nonscratch a1
84
85 addiu t1, $28, _THREAD_SIZE - 32
86 sw t1, kernelsp
87
88 mfc0 t1, CP0_STATUS /* Do we really need this? */
89 li a3, 0xff01
90 and t1, a3
91 lw a2, THREAD_STATUS(a1)
92 nor a3, $0, a3
93 and a2, a3
94 or a2, t1
95 mtc0 a2, CP0_STATUS
96 move v0, a0
97 jr ra
98 END(resume)
99
100/*
101 * Save a thread's fp context.
102 */
103LEAF(_save_fp)
104 fpu_save_single a0, t1 # clobbers t1
105 jr ra
106 END(_save_fp)
107
108/*
109 * Restore a thread's fp context.
110 */
111LEAF(_restore_fp)
112 fpu_restore_single a0, t1 # clobbers t1
113 jr ra
114 END(_restore_fp)
115
116/*
117 * Load the FPU with signalling NANS. This bit pattern we're using has
118 * the property that no matter whether considered as single or as double
119 * precision represents signaling NANS.
120 *
121 * We initialize fcr31 to rounding to nearest, no exceptions.
122 */
123
124#define FPU_DEFAULT 0x00000000
125
126LEAF(_init_fpu)
127 mfc0 t0, CP0_STATUS
128 li t1, ST0_CU1
129 or t0, t1
130 mtc0 t0, CP0_STATUS
131
132 li t1, FPU_DEFAULT
133 ctc1 t1, fcr31
134
135 li t0, -1
136
137 mtc1 t0, $f0
138 mtc1 t0, $f1
139 mtc1 t0, $f2
140 mtc1 t0, $f3
141 mtc1 t0, $f4
142 mtc1 t0, $f5
143 mtc1 t0, $f6
144 mtc1 t0, $f7
145 mtc1 t0, $f8
146 mtc1 t0, $f9
147 mtc1 t0, $f10
148 mtc1 t0, $f11
149 mtc1 t0, $f12
150 mtc1 t0, $f13
151 mtc1 t0, $f14
152 mtc1 t0, $f15
153 mtc1 t0, $f16
154 mtc1 t0, $f17
155 mtc1 t0, $f18
156 mtc1 t0, $f19
157 mtc1 t0, $f20
158 mtc1 t0, $f21
159 mtc1 t0, $f22
160 mtc1 t0, $f23
161 mtc1 t0, $f24
162 mtc1 t0, $f25
163 mtc1 t0, $f26
164 mtc1 t0, $f27
165 mtc1 t0, $f28
166 mtc1 t0, $f29
167 mtc1 t0, $f30
168 mtc1 t0, $f31
169 jr ra
170 END(_init_fpu)
1/*
2 * r2300_switch.S: R2300 specific task switching code.
3 *
4 * Copyright (C) 1994, 1995, 1996, 1999 by Ralf Baechle
5 * Copyright (C) 1994, 1995, 1996 by Andreas Busse
6 *
7 * Multi-cpu abstraction and macros for easier reading:
8 * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
9 *
10 * Further modifications to make this work:
11 * Copyright (c) 1998-2000 Harald Koerfgen
12 */
13#include <asm/asm.h>
14#include <asm/cachectl.h>
15#include <asm/fpregdef.h>
16#include <asm/mipsregs.h>
17#include <asm/asm-offsets.h>
18#include <asm/regdef.h>
19#include <asm/stackframe.h>
20#include <asm/thread_info.h>
21
22#include <asm/asmmacro.h>
23
24 .set mips1
25 .align 5
26
27/*
28 * Offset to the current process status flags, the first 32 bytes of the
29 * stack are not used.
30 */
31#define ST_OFF (_THREAD_SIZE - 32 - PT_SIZE + PT_STATUS)
32
33/*
34 * task_struct *resume(task_struct *prev, task_struct *next,
35 * struct thread_info *next_ti)
36 */
37LEAF(resume)
38 mfc0 t1, CP0_STATUS
39 sw t1, THREAD_STATUS(a0)
40 cpu_save_nonscratch a0
41 sw ra, THREAD_REG31(a0)
42
43#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
44 PTR_LA t8, __stack_chk_guard
45 LONG_L t9, TASK_STACK_CANARY(a1)
46 LONG_S t9, 0(t8)
47#endif
48
49 /*
50 * The order of restoring the registers takes care of the race
51 * updating $28, $29 and kernelsp without disabling ints.
52 */
53 move $28, a2
54 cpu_restore_nonscratch a1
55
56 addiu t1, $28, _THREAD_SIZE - 32
57 sw t1, kernelsp
58
59 mfc0 t1, CP0_STATUS /* Do we really need this? */
60 li a3, 0xff01
61 and t1, a3
62 lw a2, THREAD_STATUS(a1)
63 nor a3, $0, a3
64 and a2, a3
65 or a2, t1
66 mtc0 a2, CP0_STATUS
67 move v0, a0
68 jr ra
69 END(resume)
70
71/*
72 * Save a thread's fp context.
73 */
74LEAF(_save_fp)
75 fpu_save_single a0, t1 # clobbers t1
76 jr ra
77 END(_save_fp)
78
79/*
80 * Restore a thread's fp context.
81 */
82LEAF(_restore_fp)
83 fpu_restore_single a0, t1 # clobbers t1
84 jr ra
85 END(_restore_fp)
86
87/*
88 * Load the FPU with signalling NANS. This bit pattern we're using has
89 * the property that no matter whether considered as single or as double
90 * precision represents signaling NANS.
91 *
92 * The value to initialize fcr31 to comes in $a0.
93 */
94
95 .set push
96 SET_HARDFLOAT
97
98LEAF(_init_fpu)
99 mfc0 t0, CP0_STATUS
100 li t1, ST0_CU1
101 or t0, t1
102 mtc0 t0, CP0_STATUS
103
104 ctc1 a0, fcr31
105
106 li t0, -1
107
108 mtc1 t0, $f0
109 mtc1 t0, $f1
110 mtc1 t0, $f2
111 mtc1 t0, $f3
112 mtc1 t0, $f4
113 mtc1 t0, $f5
114 mtc1 t0, $f6
115 mtc1 t0, $f7
116 mtc1 t0, $f8
117 mtc1 t0, $f9
118 mtc1 t0, $f10
119 mtc1 t0, $f11
120 mtc1 t0, $f12
121 mtc1 t0, $f13
122 mtc1 t0, $f14
123 mtc1 t0, $f15
124 mtc1 t0, $f16
125 mtc1 t0, $f17
126 mtc1 t0, $f18
127 mtc1 t0, $f19
128 mtc1 t0, $f20
129 mtc1 t0, $f21
130 mtc1 t0, $f22
131 mtc1 t0, $f23
132 mtc1 t0, $f24
133 mtc1 t0, $f25
134 mtc1 t0, $f26
135 mtc1 t0, $f27
136 mtc1 t0, $f28
137 mtc1 t0, $f29
138 mtc1 t0, $f30
139 mtc1 t0, $f31
140 jr ra
141 END(_init_fpu)
142
143 .set pop