1/* linux/arch/arm/plat-s3c24xx/sleep.S
 2 *
 3 * Copyright (c) 2004 Simtec Electronics
 4 *	Ben Dooks <ben@simtec.co.uk>
 5 *
 6 * S3C2410 Power Manager (Suspend-To-RAM) support
 7 *
 8 * Based on PXA/SA1100 sleep code by:
 9 *	Nicolas Pitre, (c) 2002 Monta Vista Software Inc
10 *	Cliff Brake, (c) 2001
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2 of the License, or
15 * (at your option) any later version.
16 *
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
20 * GNU General Public License for more details.
21 *
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
25*/
26
27#include <linux/linkage.h>
28#include <asm/assembler.h>
29#include <mach/hardware.h>
30#include <mach/map.h>
31
32#include <mach/regs-gpio.h>
33#include <mach/regs-clock.h>
34#include <mach/regs-mem.h>
35#include <plat/regs-serial.h>
36
37/* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
38 * reset the UART configuration, only enable if you really need this!
39*/
40//#define CONFIG_DEBUG_RESUME
41
42	.text
43
44	/* sleep magic, to allow the bootloader to check for an valid
45	 * image to resume to. Must be the first word before the
46	 * s3c_cpu_resume entry.
47	*/
48
49	.word	0x2bedf00d
50
51	/* s3c_cpu_resume
52	 *
53	 * resume code entry for bootloader to call
54	*/
55
56ENTRY(s3c_cpu_resume)
57	mov	r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
58	msr	cpsr_c, r0
59
60	@@ load UART to allow us to print the two characters for
61	@@ resume debug
62
63	mov	r2, #S3C24XX_PA_UART & 0xff000000
64	orr	r2, r2, #S3C24XX_PA_UART & 0xff000
65
66#if 0
67	/* SMDK2440 LED set */
68	mov	r14, #S3C24XX_PA_GPIO
69	ldr	r12, [ r14, #0x54 ]
70	bic	r12, r12, #3<<4
71	orr	r12, r12, #1<<7
72	str	r12, [ r14, #0x54 ]
73#endif
74
75#ifdef CONFIG_DEBUG_RESUME
76	mov	r3, #'L'
77	strb	r3, [ r2, #S3C2410_UTXH ]
781001:
79	ldrb	r14, [ r3, #S3C2410_UTRSTAT ]
80	tst	r14, #S3C2410_UTRSTAT_TXE
81	beq	1001b
82#endif /* CONFIG_DEBUG_RESUME */
83
84	b	cpu_resume