Loading...
1/*
2 *Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
3 *
4 *This program is free software; you can redistribute it and/or modify
5 *it under the terms of the GNU General Public License as published by
6 *the Free Software Foundation; version 2 of the License.
7 *
8 *This program is distributed in the hope that it will be useful,
9 *but WITHOUT ANY WARRANTY; without even the implied warranty of
10 *MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11 *GNU General Public License for more details.
12 *
13 *You should have received a copy of the GNU General Public License
14 *along with this program; if not, write to the Free Software
15 *Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
16 */
17#include <linux/kernel.h>
18#include <linux/serial_reg.h>
19#include <linux/slab.h>
20#include <linux/module.h>
21#include <linux/pci.h>
22#include <linux/serial_core.h>
23#include <linux/interrupt.h>
24#include <linux/io.h>
25#include <linux/dmi.h>
26
27#include <linux/dmaengine.h>
28#include <linux/pch_dma.h>
29
30enum {
31 PCH_UART_HANDLED_RX_INT_SHIFT,
32 PCH_UART_HANDLED_TX_INT_SHIFT,
33 PCH_UART_HANDLED_RX_ERR_INT_SHIFT,
34 PCH_UART_HANDLED_RX_TRG_INT_SHIFT,
35 PCH_UART_HANDLED_MS_INT_SHIFT,
36};
37
38enum {
39 PCH_UART_8LINE,
40 PCH_UART_2LINE,
41};
42
43#define PCH_UART_DRIVER_DEVICE "ttyPCH"
44
45/* Set the max number of UART port
46 * Intel EG20T PCH: 4 port
47 * OKI SEMICONDUCTOR ML7213 IOH: 3 port
48 * OKI SEMICONDUCTOR ML7223 IOH: 2 port
49*/
50#define PCH_UART_NR 4
51
52#define PCH_UART_HANDLED_RX_INT (1<<((PCH_UART_HANDLED_RX_INT_SHIFT)<<1))
53#define PCH_UART_HANDLED_TX_INT (1<<((PCH_UART_HANDLED_TX_INT_SHIFT)<<1))
54#define PCH_UART_HANDLED_RX_ERR_INT (1<<((\
55 PCH_UART_HANDLED_RX_ERR_INT_SHIFT)<<1))
56#define PCH_UART_HANDLED_RX_TRG_INT (1<<((\
57 PCH_UART_HANDLED_RX_TRG_INT_SHIFT)<<1))
58#define PCH_UART_HANDLED_MS_INT (1<<((PCH_UART_HANDLED_MS_INT_SHIFT)<<1))
59
60#define PCH_UART_RBR 0x00
61#define PCH_UART_THR 0x00
62
63#define PCH_UART_IER_MASK (PCH_UART_IER_ERBFI|PCH_UART_IER_ETBEI|\
64 PCH_UART_IER_ELSI|PCH_UART_IER_EDSSI)
65#define PCH_UART_IER_ERBFI 0x00000001
66#define PCH_UART_IER_ETBEI 0x00000002
67#define PCH_UART_IER_ELSI 0x00000004
68#define PCH_UART_IER_EDSSI 0x00000008
69
70#define PCH_UART_IIR_IP 0x00000001
71#define PCH_UART_IIR_IID 0x00000006
72#define PCH_UART_IIR_MSI 0x00000000
73#define PCH_UART_IIR_TRI 0x00000002
74#define PCH_UART_IIR_RRI 0x00000004
75#define PCH_UART_IIR_REI 0x00000006
76#define PCH_UART_IIR_TOI 0x00000008
77#define PCH_UART_IIR_FIFO256 0x00000020
78#define PCH_UART_IIR_FIFO64 PCH_UART_IIR_FIFO256
79#define PCH_UART_IIR_FE 0x000000C0
80
81#define PCH_UART_FCR_FIFOE 0x00000001
82#define PCH_UART_FCR_RFR 0x00000002
83#define PCH_UART_FCR_TFR 0x00000004
84#define PCH_UART_FCR_DMS 0x00000008
85#define PCH_UART_FCR_FIFO256 0x00000020
86#define PCH_UART_FCR_RFTL 0x000000C0
87
88#define PCH_UART_FCR_RFTL1 0x00000000
89#define PCH_UART_FCR_RFTL64 0x00000040
90#define PCH_UART_FCR_RFTL128 0x00000080
91#define PCH_UART_FCR_RFTL224 0x000000C0
92#define PCH_UART_FCR_RFTL16 PCH_UART_FCR_RFTL64
93#define PCH_UART_FCR_RFTL32 PCH_UART_FCR_RFTL128
94#define PCH_UART_FCR_RFTL56 PCH_UART_FCR_RFTL224
95#define PCH_UART_FCR_RFTL4 PCH_UART_FCR_RFTL64
96#define PCH_UART_FCR_RFTL8 PCH_UART_FCR_RFTL128
97#define PCH_UART_FCR_RFTL14 PCH_UART_FCR_RFTL224
98#define PCH_UART_FCR_RFTL_SHIFT 6
99
100#define PCH_UART_LCR_WLS 0x00000003
101#define PCH_UART_LCR_STB 0x00000004
102#define PCH_UART_LCR_PEN 0x00000008
103#define PCH_UART_LCR_EPS 0x00000010
104#define PCH_UART_LCR_SP 0x00000020
105#define PCH_UART_LCR_SB 0x00000040
106#define PCH_UART_LCR_DLAB 0x00000080
107#define PCH_UART_LCR_NP 0x00000000
108#define PCH_UART_LCR_OP PCH_UART_LCR_PEN
109#define PCH_UART_LCR_EP (PCH_UART_LCR_PEN | PCH_UART_LCR_EPS)
110#define PCH_UART_LCR_1P (PCH_UART_LCR_PEN | PCH_UART_LCR_SP)
111#define PCH_UART_LCR_0P (PCH_UART_LCR_PEN | PCH_UART_LCR_EPS |\
112 PCH_UART_LCR_SP)
113
114#define PCH_UART_LCR_5BIT 0x00000000
115#define PCH_UART_LCR_6BIT 0x00000001
116#define PCH_UART_LCR_7BIT 0x00000002
117#define PCH_UART_LCR_8BIT 0x00000003
118
119#define PCH_UART_MCR_DTR 0x00000001
120#define PCH_UART_MCR_RTS 0x00000002
121#define PCH_UART_MCR_OUT 0x0000000C
122#define PCH_UART_MCR_LOOP 0x00000010
123#define PCH_UART_MCR_AFE 0x00000020
124
125#define PCH_UART_LSR_DR 0x00000001
126#define PCH_UART_LSR_ERR (1<<7)
127
128#define PCH_UART_MSR_DCTS 0x00000001
129#define PCH_UART_MSR_DDSR 0x00000002
130#define PCH_UART_MSR_TERI 0x00000004
131#define PCH_UART_MSR_DDCD 0x00000008
132#define PCH_UART_MSR_CTS 0x00000010
133#define PCH_UART_MSR_DSR 0x00000020
134#define PCH_UART_MSR_RI 0x00000040
135#define PCH_UART_MSR_DCD 0x00000080
136#define PCH_UART_MSR_DELTA (PCH_UART_MSR_DCTS | PCH_UART_MSR_DDSR |\
137 PCH_UART_MSR_TERI | PCH_UART_MSR_DDCD)
138
139#define PCH_UART_DLL 0x00
140#define PCH_UART_DLM 0x01
141
142#define PCH_UART_IID_RLS (PCH_UART_IIR_REI)
143#define PCH_UART_IID_RDR (PCH_UART_IIR_RRI)
144#define PCH_UART_IID_RDR_TO (PCH_UART_IIR_RRI | PCH_UART_IIR_TOI)
145#define PCH_UART_IID_THRE (PCH_UART_IIR_TRI)
146#define PCH_UART_IID_MS (PCH_UART_IIR_MSI)
147
148#define PCH_UART_HAL_PARITY_NONE (PCH_UART_LCR_NP)
149#define PCH_UART_HAL_PARITY_ODD (PCH_UART_LCR_OP)
150#define PCH_UART_HAL_PARITY_EVEN (PCH_UART_LCR_EP)
151#define PCH_UART_HAL_PARITY_FIX1 (PCH_UART_LCR_1P)
152#define PCH_UART_HAL_PARITY_FIX0 (PCH_UART_LCR_0P)
153#define PCH_UART_HAL_5BIT (PCH_UART_LCR_5BIT)
154#define PCH_UART_HAL_6BIT (PCH_UART_LCR_6BIT)
155#define PCH_UART_HAL_7BIT (PCH_UART_LCR_7BIT)
156#define PCH_UART_HAL_8BIT (PCH_UART_LCR_8BIT)
157#define PCH_UART_HAL_STB1 0
158#define PCH_UART_HAL_STB2 (PCH_UART_LCR_STB)
159
160#define PCH_UART_HAL_CLR_TX_FIFO (PCH_UART_FCR_TFR)
161#define PCH_UART_HAL_CLR_RX_FIFO (PCH_UART_FCR_RFR)
162#define PCH_UART_HAL_CLR_ALL_FIFO (PCH_UART_HAL_CLR_TX_FIFO | \
163 PCH_UART_HAL_CLR_RX_FIFO)
164
165#define PCH_UART_HAL_DMA_MODE0 0
166#define PCH_UART_HAL_FIFO_DIS 0
167#define PCH_UART_HAL_FIFO16 (PCH_UART_FCR_FIFOE)
168#define PCH_UART_HAL_FIFO256 (PCH_UART_FCR_FIFOE | \
169 PCH_UART_FCR_FIFO256)
170#define PCH_UART_HAL_FIFO64 (PCH_UART_HAL_FIFO256)
171#define PCH_UART_HAL_TRIGGER1 (PCH_UART_FCR_RFTL1)
172#define PCH_UART_HAL_TRIGGER64 (PCH_UART_FCR_RFTL64)
173#define PCH_UART_HAL_TRIGGER128 (PCH_UART_FCR_RFTL128)
174#define PCH_UART_HAL_TRIGGER224 (PCH_UART_FCR_RFTL224)
175#define PCH_UART_HAL_TRIGGER16 (PCH_UART_FCR_RFTL16)
176#define PCH_UART_HAL_TRIGGER32 (PCH_UART_FCR_RFTL32)
177#define PCH_UART_HAL_TRIGGER56 (PCH_UART_FCR_RFTL56)
178#define PCH_UART_HAL_TRIGGER4 (PCH_UART_FCR_RFTL4)
179#define PCH_UART_HAL_TRIGGER8 (PCH_UART_FCR_RFTL8)
180#define PCH_UART_HAL_TRIGGER14 (PCH_UART_FCR_RFTL14)
181#define PCH_UART_HAL_TRIGGER_L (PCH_UART_FCR_RFTL64)
182#define PCH_UART_HAL_TRIGGER_M (PCH_UART_FCR_RFTL128)
183#define PCH_UART_HAL_TRIGGER_H (PCH_UART_FCR_RFTL224)
184
185#define PCH_UART_HAL_RX_INT (PCH_UART_IER_ERBFI)
186#define PCH_UART_HAL_TX_INT (PCH_UART_IER_ETBEI)
187#define PCH_UART_HAL_RX_ERR_INT (PCH_UART_IER_ELSI)
188#define PCH_UART_HAL_MS_INT (PCH_UART_IER_EDSSI)
189#define PCH_UART_HAL_ALL_INT (PCH_UART_IER_MASK)
190
191#define PCH_UART_HAL_DTR (PCH_UART_MCR_DTR)
192#define PCH_UART_HAL_RTS (PCH_UART_MCR_RTS)
193#define PCH_UART_HAL_OUT (PCH_UART_MCR_OUT)
194#define PCH_UART_HAL_LOOP (PCH_UART_MCR_LOOP)
195#define PCH_UART_HAL_AFE (PCH_UART_MCR_AFE)
196
197#define PCI_VENDOR_ID_ROHM 0x10DB
198
199struct pch_uart_buffer {
200 unsigned char *buf;
201 int size;
202};
203
204struct eg20t_port {
205 struct uart_port port;
206 int port_type;
207 void __iomem *membase;
208 resource_size_t mapbase;
209 unsigned int iobase;
210 struct pci_dev *pdev;
211 int fifo_size;
212 int base_baud;
213 int start_tx;
214 int start_rx;
215 int tx_empty;
216 int int_dis_flag;
217 int trigger;
218 int trigger_level;
219 struct pch_uart_buffer rxbuf;
220 unsigned int dmsr;
221 unsigned int fcr;
222 unsigned int mcr;
223 unsigned int use_dma;
224 unsigned int use_dma_flag;
225 struct dma_async_tx_descriptor *desc_tx;
226 struct dma_async_tx_descriptor *desc_rx;
227 struct pch_dma_slave param_tx;
228 struct pch_dma_slave param_rx;
229 struct dma_chan *chan_tx;
230 struct dma_chan *chan_rx;
231 struct scatterlist *sg_tx_p;
232 int nent;
233 struct scatterlist sg_rx;
234 int tx_dma_use;
235 void *rx_buf_virt;
236 dma_addr_t rx_buf_dma;
237};
238
239/**
240 * struct pch_uart_driver_data - private data structure for UART-DMA
241 * @port_type: The number of DMA channel
242 * @line_no: UART port line number (0, 1, 2...)
243 */
244struct pch_uart_driver_data {
245 int port_type;
246 int line_no;
247};
248
249enum pch_uart_num_t {
250 pch_et20t_uart0 = 0,
251 pch_et20t_uart1,
252 pch_et20t_uart2,
253 pch_et20t_uart3,
254 pch_ml7213_uart0,
255 pch_ml7213_uart1,
256 pch_ml7213_uart2,
257 pch_ml7223_uart0,
258 pch_ml7223_uart1,
259};
260
261static struct pch_uart_driver_data drv_dat[] = {
262 [pch_et20t_uart0] = {PCH_UART_8LINE, 0},
263 [pch_et20t_uart1] = {PCH_UART_2LINE, 1},
264 [pch_et20t_uart2] = {PCH_UART_2LINE, 2},
265 [pch_et20t_uart3] = {PCH_UART_2LINE, 3},
266 [pch_ml7213_uart0] = {PCH_UART_8LINE, 0},
267 [pch_ml7213_uart1] = {PCH_UART_2LINE, 1},
268 [pch_ml7213_uart2] = {PCH_UART_2LINE, 2},
269 [pch_ml7223_uart0] = {PCH_UART_8LINE, 0},
270 [pch_ml7223_uart1] = {PCH_UART_2LINE, 1},
271};
272
273static unsigned int default_baud = 9600;
274static const int trigger_level_256[4] = { 1, 64, 128, 224 };
275static const int trigger_level_64[4] = { 1, 16, 32, 56 };
276static const int trigger_level_16[4] = { 1, 4, 8, 14 };
277static const int trigger_level_1[4] = { 1, 1, 1, 1 };
278
279static void pch_uart_hal_request(struct pci_dev *pdev, int fifosize,
280 int base_baud)
281{
282 struct eg20t_port *priv = pci_get_drvdata(pdev);
283
284 priv->trigger_level = 1;
285 priv->fcr = 0;
286}
287
288static unsigned int get_msr(struct eg20t_port *priv, void __iomem *base)
289{
290 unsigned int msr = ioread8(base + UART_MSR);
291 priv->dmsr |= msr & PCH_UART_MSR_DELTA;
292
293 return msr;
294}
295
296static void pch_uart_hal_enable_interrupt(struct eg20t_port *priv,
297 unsigned int flag)
298{
299 u8 ier = ioread8(priv->membase + UART_IER);
300 ier |= flag & PCH_UART_IER_MASK;
301 iowrite8(ier, priv->membase + UART_IER);
302}
303
304static void pch_uart_hal_disable_interrupt(struct eg20t_port *priv,
305 unsigned int flag)
306{
307 u8 ier = ioread8(priv->membase + UART_IER);
308 ier &= ~(flag & PCH_UART_IER_MASK);
309 iowrite8(ier, priv->membase + UART_IER);
310}
311
312static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud,
313 unsigned int parity, unsigned int bits,
314 unsigned int stb)
315{
316 unsigned int dll, dlm, lcr;
317 int div;
318
319 div = DIV_ROUND_CLOSEST(priv->base_baud / 16, baud);
320 if (div < 0 || USHRT_MAX <= div) {
321 dev_err(priv->port.dev, "Invalid Baud(div=0x%x)\n", div);
322 return -EINVAL;
323 }
324
325 dll = (unsigned int)div & 0x00FFU;
326 dlm = ((unsigned int)div >> 8) & 0x00FFU;
327
328 if (parity & ~(PCH_UART_LCR_PEN | PCH_UART_LCR_EPS | PCH_UART_LCR_SP)) {
329 dev_err(priv->port.dev, "Invalid parity(0x%x)\n", parity);
330 return -EINVAL;
331 }
332
333 if (bits & ~PCH_UART_LCR_WLS) {
334 dev_err(priv->port.dev, "Invalid bits(0x%x)\n", bits);
335 return -EINVAL;
336 }
337
338 if (stb & ~PCH_UART_LCR_STB) {
339 dev_err(priv->port.dev, "Invalid STB(0x%x)\n", stb);
340 return -EINVAL;
341 }
342
343 lcr = parity;
344 lcr |= bits;
345 lcr |= stb;
346
347 dev_dbg(priv->port.dev, "%s:baud = %d, div = %04x, lcr = %02x (%lu)\n",
348 __func__, baud, div, lcr, jiffies);
349 iowrite8(PCH_UART_LCR_DLAB, priv->membase + UART_LCR);
350 iowrite8(dll, priv->membase + PCH_UART_DLL);
351 iowrite8(dlm, priv->membase + PCH_UART_DLM);
352 iowrite8(lcr, priv->membase + UART_LCR);
353
354 return 0;
355}
356
357static int pch_uart_hal_fifo_reset(struct eg20t_port *priv,
358 unsigned int flag)
359{
360 if (flag & ~(PCH_UART_FCR_TFR | PCH_UART_FCR_RFR)) {
361 dev_err(priv->port.dev, "%s:Invalid flag(0x%x)\n",
362 __func__, flag);
363 return -EINVAL;
364 }
365
366 iowrite8(PCH_UART_FCR_FIFOE | priv->fcr, priv->membase + UART_FCR);
367 iowrite8(PCH_UART_FCR_FIFOE | priv->fcr | flag,
368 priv->membase + UART_FCR);
369 iowrite8(priv->fcr, priv->membase + UART_FCR);
370
371 return 0;
372}
373
374static int pch_uart_hal_set_fifo(struct eg20t_port *priv,
375 unsigned int dmamode,
376 unsigned int fifo_size, unsigned int trigger)
377{
378 u8 fcr;
379
380 if (dmamode & ~PCH_UART_FCR_DMS) {
381 dev_err(priv->port.dev, "%s:Invalid DMA Mode(0x%x)\n",
382 __func__, dmamode);
383 return -EINVAL;
384 }
385
386 if (fifo_size & ~(PCH_UART_FCR_FIFOE | PCH_UART_FCR_FIFO256)) {
387 dev_err(priv->port.dev, "%s:Invalid FIFO SIZE(0x%x)\n",
388 __func__, fifo_size);
389 return -EINVAL;
390 }
391
392 if (trigger & ~PCH_UART_FCR_RFTL) {
393 dev_err(priv->port.dev, "%s:Invalid TRIGGER(0x%x)\n",
394 __func__, trigger);
395 return -EINVAL;
396 }
397
398 switch (priv->fifo_size) {
399 case 256:
400 priv->trigger_level =
401 trigger_level_256[trigger >> PCH_UART_FCR_RFTL_SHIFT];
402 break;
403 case 64:
404 priv->trigger_level =
405 trigger_level_64[trigger >> PCH_UART_FCR_RFTL_SHIFT];
406 break;
407 case 16:
408 priv->trigger_level =
409 trigger_level_16[trigger >> PCH_UART_FCR_RFTL_SHIFT];
410 break;
411 default:
412 priv->trigger_level =
413 trigger_level_1[trigger >> PCH_UART_FCR_RFTL_SHIFT];
414 break;
415 }
416 fcr =
417 dmamode | fifo_size | trigger | PCH_UART_FCR_RFR | PCH_UART_FCR_TFR;
418 iowrite8(PCH_UART_FCR_FIFOE, priv->membase + UART_FCR);
419 iowrite8(PCH_UART_FCR_FIFOE | PCH_UART_FCR_RFR | PCH_UART_FCR_TFR,
420 priv->membase + UART_FCR);
421 iowrite8(fcr, priv->membase + UART_FCR);
422 priv->fcr = fcr;
423
424 return 0;
425}
426
427static u8 pch_uart_hal_get_modem(struct eg20t_port *priv)
428{
429 priv->dmsr = 0;
430 return get_msr(priv, priv->membase);
431}
432
433static void pch_uart_hal_write(struct eg20t_port *priv,
434 const unsigned char *buf, int tx_size)
435{
436 int i;
437 unsigned int thr;
438
439 for (i = 0; i < tx_size;) {
440 thr = buf[i++];
441 iowrite8(thr, priv->membase + PCH_UART_THR);
442 }
443}
444
445static int pch_uart_hal_read(struct eg20t_port *priv, unsigned char *buf,
446 int rx_size)
447{
448 int i;
449 u8 rbr, lsr;
450
451 lsr = ioread8(priv->membase + UART_LSR);
452 for (i = 0, lsr = ioread8(priv->membase + UART_LSR);
453 i < rx_size && lsr & UART_LSR_DR;
454 lsr = ioread8(priv->membase + UART_LSR)) {
455 rbr = ioread8(priv->membase + PCH_UART_RBR);
456 buf[i++] = rbr;
457 }
458 return i;
459}
460
461static unsigned int pch_uart_hal_get_iid(struct eg20t_port *priv)
462{
463 unsigned int iir;
464 int ret;
465
466 iir = ioread8(priv->membase + UART_IIR);
467 ret = (iir & (PCH_UART_IIR_IID | PCH_UART_IIR_TOI | PCH_UART_IIR_IP));
468 return ret;
469}
470
471static u8 pch_uart_hal_get_line_status(struct eg20t_port *priv)
472{
473 return ioread8(priv->membase + UART_LSR);
474}
475
476static void pch_uart_hal_set_break(struct eg20t_port *priv, int on)
477{
478 unsigned int lcr;
479
480 lcr = ioread8(priv->membase + UART_LCR);
481 if (on)
482 lcr |= PCH_UART_LCR_SB;
483 else
484 lcr &= ~PCH_UART_LCR_SB;
485
486 iowrite8(lcr, priv->membase + UART_LCR);
487}
488
489static int push_rx(struct eg20t_port *priv, const unsigned char *buf,
490 int size)
491{
492 struct uart_port *port;
493 struct tty_struct *tty;
494
495 port = &priv->port;
496 tty = tty_port_tty_get(&port->state->port);
497 if (!tty) {
498 dev_dbg(priv->port.dev, "%s:tty is busy now", __func__);
499 return -EBUSY;
500 }
501
502 tty_insert_flip_string(tty, buf, size);
503 tty_flip_buffer_push(tty);
504 tty_kref_put(tty);
505
506 return 0;
507}
508
509static int pop_tx_x(struct eg20t_port *priv, unsigned char *buf)
510{
511 int ret;
512 struct uart_port *port = &priv->port;
513
514 if (port->x_char) {
515 dev_dbg(priv->port.dev, "%s:X character send %02x (%lu)\n",
516 __func__, port->x_char, jiffies);
517 buf[0] = port->x_char;
518 port->x_char = 0;
519 ret = 1;
520 } else {
521 ret = 0;
522 }
523
524 return ret;
525}
526
527static int dma_push_rx(struct eg20t_port *priv, int size)
528{
529 struct tty_struct *tty;
530 int room;
531 struct uart_port *port = &priv->port;
532
533 port = &priv->port;
534 tty = tty_port_tty_get(&port->state->port);
535 if (!tty) {
536 dev_dbg(priv->port.dev, "%s:tty is busy now", __func__);
537 return 0;
538 }
539
540 room = tty_buffer_request_room(tty, size);
541
542 if (room < size)
543 dev_warn(port->dev, "Rx overrun: dropping %u bytes\n",
544 size - room);
545 if (!room)
546 return room;
547
548 tty_insert_flip_string(tty, sg_virt(&priv->sg_rx), size);
549
550 port->icount.rx += room;
551 tty_kref_put(tty);
552
553 return room;
554}
555
556static void pch_free_dma(struct uart_port *port)
557{
558 struct eg20t_port *priv;
559 priv = container_of(port, struct eg20t_port, port);
560
561 if (priv->chan_tx) {
562 dma_release_channel(priv->chan_tx);
563 priv->chan_tx = NULL;
564 }
565 if (priv->chan_rx) {
566 dma_release_channel(priv->chan_rx);
567 priv->chan_rx = NULL;
568 }
569 if (sg_dma_address(&priv->sg_rx))
570 dma_free_coherent(port->dev, port->fifosize,
571 sg_virt(&priv->sg_rx),
572 sg_dma_address(&priv->sg_rx));
573
574 return;
575}
576
577static bool filter(struct dma_chan *chan, void *slave)
578{
579 struct pch_dma_slave *param = slave;
580
581 if ((chan->chan_id == param->chan_id) && (param->dma_dev ==
582 chan->device->dev)) {
583 chan->private = param;
584 return true;
585 } else {
586 return false;
587 }
588}
589
590static void pch_request_dma(struct uart_port *port)
591{
592 dma_cap_mask_t mask;
593 struct dma_chan *chan;
594 struct pci_dev *dma_dev;
595 struct pch_dma_slave *param;
596 struct eg20t_port *priv =
597 container_of(port, struct eg20t_port, port);
598 dma_cap_zero(mask);
599 dma_cap_set(DMA_SLAVE, mask);
600
601 dma_dev = pci_get_bus_and_slot(priv->pdev->bus->number,
602 PCI_DEVFN(0xa, 0)); /* Get DMA's dev
603 information */
604 /* Set Tx DMA */
605 param = &priv->param_tx;
606 param->dma_dev = &dma_dev->dev;
607 param->chan_id = priv->port.line * 2; /* Tx = 0, 2, 4, ... */
608
609 param->tx_reg = port->mapbase + UART_TX;
610 chan = dma_request_channel(mask, filter, param);
611 if (!chan) {
612 dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Tx)\n",
613 __func__);
614 return;
615 }
616 priv->chan_tx = chan;
617
618 /* Set Rx DMA */
619 param = &priv->param_rx;
620 param->dma_dev = &dma_dev->dev;
621 param->chan_id = priv->port.line * 2 + 1; /* Rx = Tx + 1 */
622
623 param->rx_reg = port->mapbase + UART_RX;
624 chan = dma_request_channel(mask, filter, param);
625 if (!chan) {
626 dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Rx)\n",
627 __func__);
628 dma_release_channel(priv->chan_tx);
629 return;
630 }
631
632 /* Get Consistent memory for DMA */
633 priv->rx_buf_virt = dma_alloc_coherent(port->dev, port->fifosize,
634 &priv->rx_buf_dma, GFP_KERNEL);
635 priv->chan_rx = chan;
636}
637
638static void pch_dma_rx_complete(void *arg)
639{
640 struct eg20t_port *priv = arg;
641 struct uart_port *port = &priv->port;
642 struct tty_struct *tty = tty_port_tty_get(&port->state->port);
643 int count;
644
645 if (!tty) {
646 dev_dbg(priv->port.dev, "%s:tty is busy now", __func__);
647 return;
648 }
649
650 dma_sync_sg_for_cpu(port->dev, &priv->sg_rx, 1, DMA_FROM_DEVICE);
651 count = dma_push_rx(priv, priv->trigger_level);
652 if (count)
653 tty_flip_buffer_push(tty);
654 tty_kref_put(tty);
655 async_tx_ack(priv->desc_rx);
656 pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT);
657}
658
659static void pch_dma_tx_complete(void *arg)
660{
661 struct eg20t_port *priv = arg;
662 struct uart_port *port = &priv->port;
663 struct circ_buf *xmit = &port->state->xmit;
664 struct scatterlist *sg = priv->sg_tx_p;
665 int i;
666
667 for (i = 0; i < priv->nent; i++, sg++) {
668 xmit->tail += sg_dma_len(sg);
669 port->icount.tx += sg_dma_len(sg);
670 }
671 xmit->tail &= UART_XMIT_SIZE - 1;
672 async_tx_ack(priv->desc_tx);
673 dma_unmap_sg(port->dev, sg, priv->nent, DMA_TO_DEVICE);
674 priv->tx_dma_use = 0;
675 priv->nent = 0;
676 kfree(priv->sg_tx_p);
677 pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT);
678}
679
680static int pop_tx(struct eg20t_port *priv, int size)
681{
682 int count = 0;
683 struct uart_port *port = &priv->port;
684 struct circ_buf *xmit = &port->state->xmit;
685
686 if (uart_tx_stopped(port) || uart_circ_empty(xmit) || count >= size)
687 goto pop_tx_end;
688
689 do {
690 int cnt_to_end =
691 CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
692 int sz = min(size - count, cnt_to_end);
693 pch_uart_hal_write(priv, &xmit->buf[xmit->tail], sz);
694 xmit->tail = (xmit->tail + sz) & (UART_XMIT_SIZE - 1);
695 count += sz;
696 } while (!uart_circ_empty(xmit) && count < size);
697
698pop_tx_end:
699 dev_dbg(priv->port.dev, "%d characters. Remained %d characters.(%lu)\n",
700 count, size - count, jiffies);
701
702 return count;
703}
704
705static int handle_rx_to(struct eg20t_port *priv)
706{
707 struct pch_uart_buffer *buf;
708 int rx_size;
709 int ret;
710 if (!priv->start_rx) {
711 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT);
712 return 0;
713 }
714 buf = &priv->rxbuf;
715 do {
716 rx_size = pch_uart_hal_read(priv, buf->buf, buf->size);
717 ret = push_rx(priv, buf->buf, rx_size);
718 if (ret)
719 return 0;
720 } while (rx_size == buf->size);
721
722 return PCH_UART_HANDLED_RX_INT;
723}
724
725static int handle_rx(struct eg20t_port *priv)
726{
727 return handle_rx_to(priv);
728}
729
730static int dma_handle_rx(struct eg20t_port *priv)
731{
732 struct uart_port *port = &priv->port;
733 struct dma_async_tx_descriptor *desc;
734 struct scatterlist *sg;
735
736 priv = container_of(port, struct eg20t_port, port);
737 sg = &priv->sg_rx;
738
739 sg_init_table(&priv->sg_rx, 1); /* Initialize SG table */
740
741 sg_dma_len(sg) = priv->trigger_level;
742
743 sg_set_page(&priv->sg_rx, virt_to_page(priv->rx_buf_virt),
744 sg_dma_len(sg), (unsigned long)priv->rx_buf_virt &
745 ~PAGE_MASK);
746
747 sg_dma_address(sg) = priv->rx_buf_dma;
748
749 desc = priv->chan_rx->device->device_prep_slave_sg(priv->chan_rx,
750 sg, 1, DMA_FROM_DEVICE,
751 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
752
753 if (!desc)
754 return 0;
755
756 priv->desc_rx = desc;
757 desc->callback = pch_dma_rx_complete;
758 desc->callback_param = priv;
759 desc->tx_submit(desc);
760 dma_async_issue_pending(priv->chan_rx);
761
762 return PCH_UART_HANDLED_RX_INT;
763}
764
765static unsigned int handle_tx(struct eg20t_port *priv)
766{
767 struct uart_port *port = &priv->port;
768 struct circ_buf *xmit = &port->state->xmit;
769 int fifo_size;
770 int tx_size;
771 int size;
772 int tx_empty;
773
774 if (!priv->start_tx) {
775 dev_info(priv->port.dev, "%s:Tx isn't started. (%lu)\n",
776 __func__, jiffies);
777 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
778 priv->tx_empty = 1;
779 return 0;
780 }
781
782 fifo_size = max(priv->fifo_size, 1);
783 tx_empty = 1;
784 if (pop_tx_x(priv, xmit->buf)) {
785 pch_uart_hal_write(priv, xmit->buf, 1);
786 port->icount.tx++;
787 tx_empty = 0;
788 fifo_size--;
789 }
790 size = min(xmit->head - xmit->tail, fifo_size);
791 if (size < 0)
792 size = fifo_size;
793
794 tx_size = pop_tx(priv, size);
795 if (tx_size > 0) {
796 port->icount.tx += tx_size;
797 tx_empty = 0;
798 }
799
800 priv->tx_empty = tx_empty;
801
802 if (tx_empty) {
803 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
804 uart_write_wakeup(port);
805 }
806
807 return PCH_UART_HANDLED_TX_INT;
808}
809
810static unsigned int dma_handle_tx(struct eg20t_port *priv)
811{
812 struct uart_port *port = &priv->port;
813 struct circ_buf *xmit = &port->state->xmit;
814 struct scatterlist *sg;
815 int nent;
816 int fifo_size;
817 int tx_empty;
818 struct dma_async_tx_descriptor *desc;
819 int num;
820 int i;
821 int bytes;
822 int size;
823 int rem;
824
825 if (!priv->start_tx) {
826 dev_info(priv->port.dev, "%s:Tx isn't started. (%lu)\n",
827 __func__, jiffies);
828 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
829 priv->tx_empty = 1;
830 return 0;
831 }
832
833 if (priv->tx_dma_use) {
834 dev_dbg(priv->port.dev, "%s:Tx is not completed. (%lu)\n",
835 __func__, jiffies);
836 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
837 priv->tx_empty = 1;
838 return 0;
839 }
840
841 fifo_size = max(priv->fifo_size, 1);
842 tx_empty = 1;
843 if (pop_tx_x(priv, xmit->buf)) {
844 pch_uart_hal_write(priv, xmit->buf, 1);
845 port->icount.tx++;
846 tx_empty = 0;
847 fifo_size--;
848 }
849
850 bytes = min((int)CIRC_CNT(xmit->head, xmit->tail,
851 UART_XMIT_SIZE), CIRC_CNT_TO_END(xmit->head,
852 xmit->tail, UART_XMIT_SIZE));
853 if (!bytes) {
854 dev_dbg(priv->port.dev, "%s 0 bytes return\n", __func__);
855 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
856 uart_write_wakeup(port);
857 return 0;
858 }
859
860 if (bytes > fifo_size) {
861 num = bytes / fifo_size + 1;
862 size = fifo_size;
863 rem = bytes % fifo_size;
864 } else {
865 num = 1;
866 size = bytes;
867 rem = bytes;
868 }
869
870 dev_dbg(priv->port.dev, "%s num=%d size=%d rem=%d\n",
871 __func__, num, size, rem);
872
873 priv->tx_dma_use = 1;
874
875 priv->sg_tx_p = kzalloc(sizeof(struct scatterlist)*num, GFP_ATOMIC);
876
877 sg_init_table(priv->sg_tx_p, num); /* Initialize SG table */
878 sg = priv->sg_tx_p;
879
880 for (i = 0; i < num; i++, sg++) {
881 if (i == (num - 1))
882 sg_set_page(sg, virt_to_page(xmit->buf),
883 rem, fifo_size * i);
884 else
885 sg_set_page(sg, virt_to_page(xmit->buf),
886 size, fifo_size * i);
887 }
888
889 sg = priv->sg_tx_p;
890 nent = dma_map_sg(port->dev, sg, num, DMA_TO_DEVICE);
891 if (!nent) {
892 dev_err(priv->port.dev, "%s:dma_map_sg Failed\n", __func__);
893 return 0;
894 }
895 priv->nent = nent;
896
897 for (i = 0; i < nent; i++, sg++) {
898 sg->offset = (xmit->tail & (UART_XMIT_SIZE - 1)) +
899 fifo_size * i;
900 sg_dma_address(sg) = (sg_dma_address(sg) &
901 ~(UART_XMIT_SIZE - 1)) + sg->offset;
902 if (i == (nent - 1))
903 sg_dma_len(sg) = rem;
904 else
905 sg_dma_len(sg) = size;
906 }
907
908 desc = priv->chan_tx->device->device_prep_slave_sg(priv->chan_tx,
909 priv->sg_tx_p, nent, DMA_TO_DEVICE,
910 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
911 if (!desc) {
912 dev_err(priv->port.dev, "%s:device_prep_slave_sg Failed\n",
913 __func__);
914 return 0;
915 }
916 dma_sync_sg_for_device(port->dev, priv->sg_tx_p, nent, DMA_TO_DEVICE);
917 priv->desc_tx = desc;
918 desc->callback = pch_dma_tx_complete;
919 desc->callback_param = priv;
920
921 desc->tx_submit(desc);
922
923 dma_async_issue_pending(priv->chan_tx);
924
925 return PCH_UART_HANDLED_TX_INT;
926}
927
928static void pch_uart_err_ir(struct eg20t_port *priv, unsigned int lsr)
929{
930 u8 fcr = ioread8(priv->membase + UART_FCR);
931
932 /* Reset FIFO */
933 fcr |= UART_FCR_CLEAR_RCVR;
934 iowrite8(fcr, priv->membase + UART_FCR);
935
936 if (lsr & PCH_UART_LSR_ERR)
937 dev_err(&priv->pdev->dev, "Error data in FIFO\n");
938
939 if (lsr & UART_LSR_FE)
940 dev_err(&priv->pdev->dev, "Framing Error\n");
941
942 if (lsr & UART_LSR_PE)
943 dev_err(&priv->pdev->dev, "Parity Error\n");
944
945 if (lsr & UART_LSR_OE)
946 dev_err(&priv->pdev->dev, "Overrun Error\n");
947}
948
949static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
950{
951 struct eg20t_port *priv = dev_id;
952 unsigned int handled;
953 u8 lsr;
954 int ret = 0;
955 unsigned int iid;
956 unsigned long flags;
957
958 spin_lock_irqsave(&priv->port.lock, flags);
959 handled = 0;
960 while ((iid = pch_uart_hal_get_iid(priv)) > 1) {
961 switch (iid) {
962 case PCH_UART_IID_RLS: /* Receiver Line Status */
963 lsr = pch_uart_hal_get_line_status(priv);
964 if (lsr & (PCH_UART_LSR_ERR | UART_LSR_FE |
965 UART_LSR_PE | UART_LSR_OE)) {
966 pch_uart_err_ir(priv, lsr);
967 ret = PCH_UART_HANDLED_RX_ERR_INT;
968 }
969 break;
970 case PCH_UART_IID_RDR: /* Received Data Ready */
971 if (priv->use_dma) {
972 pch_uart_hal_disable_interrupt(priv,
973 PCH_UART_HAL_RX_INT);
974 ret = dma_handle_rx(priv);
975 if (!ret)
976 pch_uart_hal_enable_interrupt(priv,
977 PCH_UART_HAL_RX_INT);
978 } else {
979 ret = handle_rx(priv);
980 }
981 break;
982 case PCH_UART_IID_RDR_TO: /* Received Data Ready
983 (FIFO Timeout) */
984 ret = handle_rx_to(priv);
985 break;
986 case PCH_UART_IID_THRE: /* Transmitter Holding Register
987 Empty */
988 if (priv->use_dma)
989 ret = dma_handle_tx(priv);
990 else
991 ret = handle_tx(priv);
992 break;
993 case PCH_UART_IID_MS: /* Modem Status */
994 ret = PCH_UART_HANDLED_MS_INT;
995 break;
996 default: /* Never junp to this label */
997 dev_err(priv->port.dev, "%s:iid=%d (%lu)\n", __func__,
998 iid, jiffies);
999 ret = -1;
1000 break;
1001 }
1002 handled |= (unsigned int)ret;
1003 }
1004 if (handled == 0 && iid <= 1) {
1005 if (priv->int_dis_flag)
1006 priv->int_dis_flag = 0;
1007 }
1008
1009 spin_unlock_irqrestore(&priv->port.lock, flags);
1010 return IRQ_RETVAL(handled);
1011}
1012
1013/* This function tests whether the transmitter fifo and shifter for the port
1014 described by 'port' is empty. */
1015static unsigned int pch_uart_tx_empty(struct uart_port *port)
1016{
1017 struct eg20t_port *priv;
1018 int ret;
1019 priv = container_of(port, struct eg20t_port, port);
1020 if (priv->tx_empty)
1021 ret = TIOCSER_TEMT;
1022 else
1023 ret = 0;
1024
1025 return ret;
1026}
1027
1028/* Returns the current state of modem control inputs. */
1029static unsigned int pch_uart_get_mctrl(struct uart_port *port)
1030{
1031 struct eg20t_port *priv;
1032 u8 modem;
1033 unsigned int ret = 0;
1034
1035 priv = container_of(port, struct eg20t_port, port);
1036 modem = pch_uart_hal_get_modem(priv);
1037
1038 if (modem & UART_MSR_DCD)
1039 ret |= TIOCM_CAR;
1040
1041 if (modem & UART_MSR_RI)
1042 ret |= TIOCM_RNG;
1043
1044 if (modem & UART_MSR_DSR)
1045 ret |= TIOCM_DSR;
1046
1047 if (modem & UART_MSR_CTS)
1048 ret |= TIOCM_CTS;
1049
1050 return ret;
1051}
1052
1053static void pch_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
1054{
1055 u32 mcr = 0;
1056 struct eg20t_port *priv = container_of(port, struct eg20t_port, port);
1057
1058 if (mctrl & TIOCM_DTR)
1059 mcr |= UART_MCR_DTR;
1060 if (mctrl & TIOCM_RTS)
1061 mcr |= UART_MCR_RTS;
1062 if (mctrl & TIOCM_LOOP)
1063 mcr |= UART_MCR_LOOP;
1064
1065 if (priv->mcr & UART_MCR_AFE)
1066 mcr |= UART_MCR_AFE;
1067
1068 if (mctrl)
1069 iowrite8(mcr, priv->membase + UART_MCR);
1070}
1071
1072static void pch_uart_stop_tx(struct uart_port *port)
1073{
1074 struct eg20t_port *priv;
1075 priv = container_of(port, struct eg20t_port, port);
1076 priv->start_tx = 0;
1077 priv->tx_dma_use = 0;
1078}
1079
1080static void pch_uart_start_tx(struct uart_port *port)
1081{
1082 struct eg20t_port *priv;
1083
1084 priv = container_of(port, struct eg20t_port, port);
1085
1086 if (priv->use_dma) {
1087 if (priv->tx_dma_use) {
1088 dev_dbg(priv->port.dev, "%s : Tx DMA is NOT empty.\n",
1089 __func__);
1090 return;
1091 }
1092 }
1093
1094 priv->start_tx = 1;
1095 pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT);
1096}
1097
1098static void pch_uart_stop_rx(struct uart_port *port)
1099{
1100 struct eg20t_port *priv;
1101 priv = container_of(port, struct eg20t_port, port);
1102 priv->start_rx = 0;
1103 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT);
1104 priv->int_dis_flag = 1;
1105}
1106
1107/* Enable the modem status interrupts. */
1108static void pch_uart_enable_ms(struct uart_port *port)
1109{
1110 struct eg20t_port *priv;
1111 priv = container_of(port, struct eg20t_port, port);
1112 pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_MS_INT);
1113}
1114
1115/* Control the transmission of a break signal. */
1116static void pch_uart_break_ctl(struct uart_port *port, int ctl)
1117{
1118 struct eg20t_port *priv;
1119 unsigned long flags;
1120
1121 priv = container_of(port, struct eg20t_port, port);
1122 spin_lock_irqsave(&port->lock, flags);
1123 pch_uart_hal_set_break(priv, ctl);
1124 spin_unlock_irqrestore(&port->lock, flags);
1125}
1126
1127/* Grab any interrupt resources and initialise any low level driver state. */
1128static int pch_uart_startup(struct uart_port *port)
1129{
1130 struct eg20t_port *priv;
1131 int ret;
1132 int fifo_size;
1133 int trigger_level;
1134
1135 priv = container_of(port, struct eg20t_port, port);
1136 priv->tx_empty = 1;
1137
1138 if (port->uartclk)
1139 priv->base_baud = port->uartclk;
1140 else
1141 port->uartclk = priv->base_baud;
1142
1143 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
1144 ret = pch_uart_hal_set_line(priv, default_baud,
1145 PCH_UART_HAL_PARITY_NONE, PCH_UART_HAL_8BIT,
1146 PCH_UART_HAL_STB1);
1147 if (ret)
1148 return ret;
1149
1150 switch (priv->fifo_size) {
1151 case 256:
1152 fifo_size = PCH_UART_HAL_FIFO256;
1153 break;
1154 case 64:
1155 fifo_size = PCH_UART_HAL_FIFO64;
1156 break;
1157 case 16:
1158 fifo_size = PCH_UART_HAL_FIFO16;
1159 case 1:
1160 default:
1161 fifo_size = PCH_UART_HAL_FIFO_DIS;
1162 break;
1163 }
1164
1165 switch (priv->trigger) {
1166 case PCH_UART_HAL_TRIGGER1:
1167 trigger_level = 1;
1168 break;
1169 case PCH_UART_HAL_TRIGGER_L:
1170 trigger_level = priv->fifo_size / 4;
1171 break;
1172 case PCH_UART_HAL_TRIGGER_M:
1173 trigger_level = priv->fifo_size / 2;
1174 break;
1175 case PCH_UART_HAL_TRIGGER_H:
1176 default:
1177 trigger_level = priv->fifo_size - (priv->fifo_size / 8);
1178 break;
1179 }
1180
1181 priv->trigger_level = trigger_level;
1182 ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0,
1183 fifo_size, priv->trigger);
1184 if (ret < 0)
1185 return ret;
1186
1187 ret = request_irq(priv->port.irq, pch_uart_interrupt, IRQF_SHARED,
1188 KBUILD_MODNAME, priv);
1189 if (ret < 0)
1190 return ret;
1191
1192 if (priv->use_dma)
1193 pch_request_dma(port);
1194
1195 priv->start_rx = 1;
1196 pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT);
1197 uart_update_timeout(port, CS8, default_baud);
1198
1199 return 0;
1200}
1201
1202static void pch_uart_shutdown(struct uart_port *port)
1203{
1204 struct eg20t_port *priv;
1205 int ret;
1206
1207 priv = container_of(port, struct eg20t_port, port);
1208 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
1209 pch_uart_hal_fifo_reset(priv, PCH_UART_HAL_CLR_ALL_FIFO);
1210 ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0,
1211 PCH_UART_HAL_FIFO_DIS, PCH_UART_HAL_TRIGGER1);
1212 if (ret)
1213 dev_err(priv->port.dev,
1214 "pch_uart_hal_set_fifo Failed(ret=%d)\n", ret);
1215
1216 if (priv->use_dma_flag)
1217 pch_free_dma(port);
1218
1219 free_irq(priv->port.irq, priv);
1220}
1221
1222/* Change the port parameters, including word length, parity, stop
1223 *bits. Update read_status_mask and ignore_status_mask to indicate
1224 *the types of events we are interested in receiving. */
1225static void pch_uart_set_termios(struct uart_port *port,
1226 struct ktermios *termios, struct ktermios *old)
1227{
1228 int baud;
1229 int rtn;
1230 unsigned int parity, bits, stb;
1231 struct eg20t_port *priv;
1232 unsigned long flags;
1233
1234 priv = container_of(port, struct eg20t_port, port);
1235 switch (termios->c_cflag & CSIZE) {
1236 case CS5:
1237 bits = PCH_UART_HAL_5BIT;
1238 break;
1239 case CS6:
1240 bits = PCH_UART_HAL_6BIT;
1241 break;
1242 case CS7:
1243 bits = PCH_UART_HAL_7BIT;
1244 break;
1245 default: /* CS8 */
1246 bits = PCH_UART_HAL_8BIT;
1247 break;
1248 }
1249 if (termios->c_cflag & CSTOPB)
1250 stb = PCH_UART_HAL_STB2;
1251 else
1252 stb = PCH_UART_HAL_STB1;
1253
1254 if (termios->c_cflag & PARENB) {
1255 if (!(termios->c_cflag & PARODD))
1256 parity = PCH_UART_HAL_PARITY_ODD;
1257 else
1258 parity = PCH_UART_HAL_PARITY_EVEN;
1259
1260 } else {
1261 parity = PCH_UART_HAL_PARITY_NONE;
1262 }
1263
1264 /* Only UART0 has auto hardware flow function */
1265 if ((termios->c_cflag & CRTSCTS) && (priv->fifo_size == 256))
1266 priv->mcr |= UART_MCR_AFE;
1267 else
1268 priv->mcr &= ~UART_MCR_AFE;
1269
1270 termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */
1271
1272 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
1273
1274 spin_lock_irqsave(&port->lock, flags);
1275
1276 uart_update_timeout(port, termios->c_cflag, baud);
1277 rtn = pch_uart_hal_set_line(priv, baud, parity, bits, stb);
1278 if (rtn)
1279 goto out;
1280
1281 /* Don't rewrite B0 */
1282 if (tty_termios_baud_rate(termios))
1283 tty_termios_encode_baud_rate(termios, baud, baud);
1284
1285out:
1286 spin_unlock_irqrestore(&port->lock, flags);
1287}
1288
1289static const char *pch_uart_type(struct uart_port *port)
1290{
1291 return KBUILD_MODNAME;
1292}
1293
1294static void pch_uart_release_port(struct uart_port *port)
1295{
1296 struct eg20t_port *priv;
1297
1298 priv = container_of(port, struct eg20t_port, port);
1299 pci_iounmap(priv->pdev, priv->membase);
1300 pci_release_regions(priv->pdev);
1301}
1302
1303static int pch_uart_request_port(struct uart_port *port)
1304{
1305 struct eg20t_port *priv;
1306 int ret;
1307 void __iomem *membase;
1308
1309 priv = container_of(port, struct eg20t_port, port);
1310 ret = pci_request_regions(priv->pdev, KBUILD_MODNAME);
1311 if (ret < 0)
1312 return -EBUSY;
1313
1314 membase = pci_iomap(priv->pdev, 1, 0);
1315 if (!membase) {
1316 pci_release_regions(priv->pdev);
1317 return -EBUSY;
1318 }
1319 priv->membase = port->membase = membase;
1320
1321 return 0;
1322}
1323
1324static void pch_uart_config_port(struct uart_port *port, int type)
1325{
1326 struct eg20t_port *priv;
1327
1328 priv = container_of(port, struct eg20t_port, port);
1329 if (type & UART_CONFIG_TYPE) {
1330 port->type = priv->port_type;
1331 pch_uart_request_port(port);
1332 }
1333}
1334
1335static int pch_uart_verify_port(struct uart_port *port,
1336 struct serial_struct *serinfo)
1337{
1338 struct eg20t_port *priv;
1339
1340 priv = container_of(port, struct eg20t_port, port);
1341 if (serinfo->flags & UPF_LOW_LATENCY) {
1342 dev_info(priv->port.dev,
1343 "PCH UART : Use PIO Mode (without DMA)\n");
1344 priv->use_dma = 0;
1345 serinfo->flags &= ~UPF_LOW_LATENCY;
1346 } else {
1347#ifndef CONFIG_PCH_DMA
1348 dev_err(priv->port.dev, "%s : PCH DMA is not Loaded.\n",
1349 __func__);
1350 return -EOPNOTSUPP;
1351#endif
1352 priv->use_dma = 1;
1353 priv->use_dma_flag = 1;
1354 dev_info(priv->port.dev, "PCH UART : Use DMA Mode\n");
1355 }
1356
1357 return 0;
1358}
1359
1360static struct uart_ops pch_uart_ops = {
1361 .tx_empty = pch_uart_tx_empty,
1362 .set_mctrl = pch_uart_set_mctrl,
1363 .get_mctrl = pch_uart_get_mctrl,
1364 .stop_tx = pch_uart_stop_tx,
1365 .start_tx = pch_uart_start_tx,
1366 .stop_rx = pch_uart_stop_rx,
1367 .enable_ms = pch_uart_enable_ms,
1368 .break_ctl = pch_uart_break_ctl,
1369 .startup = pch_uart_startup,
1370 .shutdown = pch_uart_shutdown,
1371 .set_termios = pch_uart_set_termios,
1372/* .pm = pch_uart_pm, Not supported yet */
1373/* .set_wake = pch_uart_set_wake, Not supported yet */
1374 .type = pch_uart_type,
1375 .release_port = pch_uart_release_port,
1376 .request_port = pch_uart_request_port,
1377 .config_port = pch_uart_config_port,
1378 .verify_port = pch_uart_verify_port
1379};
1380
1381static struct uart_driver pch_uart_driver = {
1382 .owner = THIS_MODULE,
1383 .driver_name = KBUILD_MODNAME,
1384 .dev_name = PCH_UART_DRIVER_DEVICE,
1385 .major = 0,
1386 .minor = 0,
1387 .nr = PCH_UART_NR,
1388};
1389
1390static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
1391 const struct pci_device_id *id)
1392{
1393 struct eg20t_port *priv;
1394 int ret;
1395 unsigned int iobase;
1396 unsigned int mapbase;
1397 unsigned char *rxbuf;
1398 int fifosize, base_baud;
1399 int port_type;
1400 struct pch_uart_driver_data *board;
1401 const char *board_name;
1402
1403 board = &drv_dat[id->driver_data];
1404 port_type = board->port_type;
1405
1406 priv = kzalloc(sizeof(struct eg20t_port), GFP_KERNEL);
1407 if (priv == NULL)
1408 goto init_port_alloc_err;
1409
1410 rxbuf = (unsigned char *)__get_free_page(GFP_KERNEL);
1411 if (!rxbuf)
1412 goto init_port_free_txbuf;
1413
1414 base_baud = 1843200; /* 1.8432MHz */
1415
1416 /* quirk for CM-iTC board */
1417 board_name = dmi_get_system_info(DMI_BOARD_NAME);
1418 if (board_name && strstr(board_name, "CM-iTC"))
1419 base_baud = 192000000; /* 192.0MHz */
1420
1421 switch (port_type) {
1422 case PORT_UNKNOWN:
1423 fifosize = 256; /* EG20T/ML7213: UART0 */
1424 break;
1425 case PORT_8250:
1426 fifosize = 64; /* EG20T:UART1~3 ML7213: UART1~2*/
1427 break;
1428 default:
1429 dev_err(&pdev->dev, "Invalid Port Type(=%d)\n", port_type);
1430 goto init_port_hal_free;
1431 }
1432
1433 pci_enable_msi(pdev);
1434
1435 iobase = pci_resource_start(pdev, 0);
1436 mapbase = pci_resource_start(pdev, 1);
1437 priv->mapbase = mapbase;
1438 priv->iobase = iobase;
1439 priv->pdev = pdev;
1440 priv->tx_empty = 1;
1441 priv->rxbuf.buf = rxbuf;
1442 priv->rxbuf.size = PAGE_SIZE;
1443
1444 priv->fifo_size = fifosize;
1445 priv->base_baud = base_baud;
1446 priv->port_type = PORT_MAX_8250 + port_type + 1;
1447 priv->port.dev = &pdev->dev;
1448 priv->port.iobase = iobase;
1449 priv->port.membase = NULL;
1450 priv->port.mapbase = mapbase;
1451 priv->port.irq = pdev->irq;
1452 priv->port.iotype = UPIO_PORT;
1453 priv->port.ops = &pch_uart_ops;
1454 priv->port.flags = UPF_BOOT_AUTOCONF;
1455 priv->port.fifosize = fifosize;
1456 priv->port.line = board->line_no;
1457 priv->trigger = PCH_UART_HAL_TRIGGER_M;
1458
1459 spin_lock_init(&priv->port.lock);
1460
1461 pci_set_drvdata(pdev, priv);
1462 pch_uart_hal_request(pdev, fifosize, base_baud);
1463
1464 ret = uart_add_one_port(&pch_uart_driver, &priv->port);
1465 if (ret < 0)
1466 goto init_port_hal_free;
1467
1468 return priv;
1469
1470init_port_hal_free:
1471 free_page((unsigned long)rxbuf);
1472init_port_free_txbuf:
1473 kfree(priv);
1474init_port_alloc_err:
1475
1476 return NULL;
1477}
1478
1479static void pch_uart_exit_port(struct eg20t_port *priv)
1480{
1481 uart_remove_one_port(&pch_uart_driver, &priv->port);
1482 pci_set_drvdata(priv->pdev, NULL);
1483 free_page((unsigned long)priv->rxbuf.buf);
1484}
1485
1486static void pch_uart_pci_remove(struct pci_dev *pdev)
1487{
1488 struct eg20t_port *priv;
1489
1490 priv = (struct eg20t_port *)pci_get_drvdata(pdev);
1491
1492 pci_disable_msi(pdev);
1493 pch_uart_exit_port(priv);
1494 pci_disable_device(pdev);
1495 kfree(priv);
1496 return;
1497}
1498#ifdef CONFIG_PM
1499static int pch_uart_pci_suspend(struct pci_dev *pdev, pm_message_t state)
1500{
1501 struct eg20t_port *priv = pci_get_drvdata(pdev);
1502
1503 uart_suspend_port(&pch_uart_driver, &priv->port);
1504
1505 pci_save_state(pdev);
1506 pci_set_power_state(pdev, pci_choose_state(pdev, state));
1507 return 0;
1508}
1509
1510static int pch_uart_pci_resume(struct pci_dev *pdev)
1511{
1512 struct eg20t_port *priv = pci_get_drvdata(pdev);
1513 int ret;
1514
1515 pci_set_power_state(pdev, PCI_D0);
1516 pci_restore_state(pdev);
1517
1518 ret = pci_enable_device(pdev);
1519 if (ret) {
1520 dev_err(&pdev->dev,
1521 "%s-pci_enable_device failed(ret=%d) ", __func__, ret);
1522 return ret;
1523 }
1524
1525 uart_resume_port(&pch_uart_driver, &priv->port);
1526
1527 return 0;
1528}
1529#else
1530#define pch_uart_pci_suspend NULL
1531#define pch_uart_pci_resume NULL
1532#endif
1533
1534static DEFINE_PCI_DEVICE_TABLE(pch_uart_pci_id) = {
1535 {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8811),
1536 .driver_data = pch_et20t_uart0},
1537 {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8812),
1538 .driver_data = pch_et20t_uart1},
1539 {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8813),
1540 .driver_data = pch_et20t_uart2},
1541 {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8814),
1542 .driver_data = pch_et20t_uart3},
1543 {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8027),
1544 .driver_data = pch_ml7213_uart0},
1545 {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8028),
1546 .driver_data = pch_ml7213_uart1},
1547 {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8029),
1548 .driver_data = pch_ml7213_uart2},
1549 {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x800C),
1550 .driver_data = pch_ml7223_uart0},
1551 {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x800D),
1552 .driver_data = pch_ml7223_uart1},
1553 {0,},
1554};
1555
1556static int __devinit pch_uart_pci_probe(struct pci_dev *pdev,
1557 const struct pci_device_id *id)
1558{
1559 int ret;
1560 struct eg20t_port *priv;
1561
1562 ret = pci_enable_device(pdev);
1563 if (ret < 0)
1564 goto probe_error;
1565
1566 priv = pch_uart_init_port(pdev, id);
1567 if (!priv) {
1568 ret = -EBUSY;
1569 goto probe_disable_device;
1570 }
1571 pci_set_drvdata(pdev, priv);
1572
1573 return ret;
1574
1575probe_disable_device:
1576 pci_disable_msi(pdev);
1577 pci_disable_device(pdev);
1578probe_error:
1579 return ret;
1580}
1581
1582static struct pci_driver pch_uart_pci_driver = {
1583 .name = "pch_uart",
1584 .id_table = pch_uart_pci_id,
1585 .probe = pch_uart_pci_probe,
1586 .remove = __devexit_p(pch_uart_pci_remove),
1587 .suspend = pch_uart_pci_suspend,
1588 .resume = pch_uart_pci_resume,
1589};
1590
1591static int __init pch_uart_module_init(void)
1592{
1593 int ret;
1594
1595 /* register as UART driver */
1596 ret = uart_register_driver(&pch_uart_driver);
1597 if (ret < 0)
1598 return ret;
1599
1600 /* register as PCI driver */
1601 ret = pci_register_driver(&pch_uart_pci_driver);
1602 if (ret < 0)
1603 uart_unregister_driver(&pch_uart_driver);
1604
1605 return ret;
1606}
1607module_init(pch_uart_module_init);
1608
1609static void __exit pch_uart_module_exit(void)
1610{
1611 pci_unregister_driver(&pch_uart_pci_driver);
1612 uart_unregister_driver(&pch_uart_driver);
1613}
1614module_exit(pch_uart_module_exit);
1615
1616MODULE_LICENSE("GPL v2");
1617MODULE_DESCRIPTION("Intel EG20T PCH UART PCI Driver");
1618module_param(default_baud, uint, S_IRUGO);
1// SPDX-License-Identifier: GPL-2.0
2/*
3 *Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
4 */
5#if defined(CONFIG_SERIAL_PCH_UART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
6#define SUPPORT_SYSRQ
7#endif
8#include <linux/kernel.h>
9#include <linux/serial_reg.h>
10#include <linux/slab.h>
11#include <linux/module.h>
12#include <linux/pci.h>
13#include <linux/console.h>
14#include <linux/serial_core.h>
15#include <linux/tty.h>
16#include <linux/tty_flip.h>
17#include <linux/interrupt.h>
18#include <linux/io.h>
19#include <linux/dmi.h>
20#include <linux/nmi.h>
21#include <linux/delay.h>
22#include <linux/of.h>
23
24#include <linux/debugfs.h>
25#include <linux/dmaengine.h>
26#include <linux/pch_dma.h>
27
28enum {
29 PCH_UART_HANDLED_RX_INT_SHIFT,
30 PCH_UART_HANDLED_TX_INT_SHIFT,
31 PCH_UART_HANDLED_RX_ERR_INT_SHIFT,
32 PCH_UART_HANDLED_RX_TRG_INT_SHIFT,
33 PCH_UART_HANDLED_MS_INT_SHIFT,
34 PCH_UART_HANDLED_LS_INT_SHIFT,
35};
36
37#define PCH_UART_DRIVER_DEVICE "ttyPCH"
38
39/* Set the max number of UART port
40 * Intel EG20T PCH: 4 port
41 * LAPIS Semiconductor ML7213 IOH: 3 port
42 * LAPIS Semiconductor ML7223 IOH: 2 port
43*/
44#define PCH_UART_NR 4
45
46#define PCH_UART_HANDLED_RX_INT (1<<((PCH_UART_HANDLED_RX_INT_SHIFT)<<1))
47#define PCH_UART_HANDLED_TX_INT (1<<((PCH_UART_HANDLED_TX_INT_SHIFT)<<1))
48#define PCH_UART_HANDLED_RX_ERR_INT (1<<((\
49 PCH_UART_HANDLED_RX_ERR_INT_SHIFT)<<1))
50#define PCH_UART_HANDLED_RX_TRG_INT (1<<((\
51 PCH_UART_HANDLED_RX_TRG_INT_SHIFT)<<1))
52#define PCH_UART_HANDLED_MS_INT (1<<((PCH_UART_HANDLED_MS_INT_SHIFT)<<1))
53
54#define PCH_UART_HANDLED_LS_INT (1<<((PCH_UART_HANDLED_LS_INT_SHIFT)<<1))
55
56#define PCH_UART_RBR 0x00
57#define PCH_UART_THR 0x00
58
59#define PCH_UART_IER_MASK (PCH_UART_IER_ERBFI|PCH_UART_IER_ETBEI|\
60 PCH_UART_IER_ELSI|PCH_UART_IER_EDSSI)
61#define PCH_UART_IER_ERBFI 0x00000001
62#define PCH_UART_IER_ETBEI 0x00000002
63#define PCH_UART_IER_ELSI 0x00000004
64#define PCH_UART_IER_EDSSI 0x00000008
65
66#define PCH_UART_IIR_IP 0x00000001
67#define PCH_UART_IIR_IID 0x00000006
68#define PCH_UART_IIR_MSI 0x00000000
69#define PCH_UART_IIR_TRI 0x00000002
70#define PCH_UART_IIR_RRI 0x00000004
71#define PCH_UART_IIR_REI 0x00000006
72#define PCH_UART_IIR_TOI 0x00000008
73#define PCH_UART_IIR_FIFO256 0x00000020
74#define PCH_UART_IIR_FIFO64 PCH_UART_IIR_FIFO256
75#define PCH_UART_IIR_FE 0x000000C0
76
77#define PCH_UART_FCR_FIFOE 0x00000001
78#define PCH_UART_FCR_RFR 0x00000002
79#define PCH_UART_FCR_TFR 0x00000004
80#define PCH_UART_FCR_DMS 0x00000008
81#define PCH_UART_FCR_FIFO256 0x00000020
82#define PCH_UART_FCR_RFTL 0x000000C0
83
84#define PCH_UART_FCR_RFTL1 0x00000000
85#define PCH_UART_FCR_RFTL64 0x00000040
86#define PCH_UART_FCR_RFTL128 0x00000080
87#define PCH_UART_FCR_RFTL224 0x000000C0
88#define PCH_UART_FCR_RFTL16 PCH_UART_FCR_RFTL64
89#define PCH_UART_FCR_RFTL32 PCH_UART_FCR_RFTL128
90#define PCH_UART_FCR_RFTL56 PCH_UART_FCR_RFTL224
91#define PCH_UART_FCR_RFTL4 PCH_UART_FCR_RFTL64
92#define PCH_UART_FCR_RFTL8 PCH_UART_FCR_RFTL128
93#define PCH_UART_FCR_RFTL14 PCH_UART_FCR_RFTL224
94#define PCH_UART_FCR_RFTL_SHIFT 6
95
96#define PCH_UART_LCR_WLS 0x00000003
97#define PCH_UART_LCR_STB 0x00000004
98#define PCH_UART_LCR_PEN 0x00000008
99#define PCH_UART_LCR_EPS 0x00000010
100#define PCH_UART_LCR_SP 0x00000020
101#define PCH_UART_LCR_SB 0x00000040
102#define PCH_UART_LCR_DLAB 0x00000080
103#define PCH_UART_LCR_NP 0x00000000
104#define PCH_UART_LCR_OP PCH_UART_LCR_PEN
105#define PCH_UART_LCR_EP (PCH_UART_LCR_PEN | PCH_UART_LCR_EPS)
106#define PCH_UART_LCR_1P (PCH_UART_LCR_PEN | PCH_UART_LCR_SP)
107#define PCH_UART_LCR_0P (PCH_UART_LCR_PEN | PCH_UART_LCR_EPS |\
108 PCH_UART_LCR_SP)
109
110#define PCH_UART_LCR_5BIT 0x00000000
111#define PCH_UART_LCR_6BIT 0x00000001
112#define PCH_UART_LCR_7BIT 0x00000002
113#define PCH_UART_LCR_8BIT 0x00000003
114
115#define PCH_UART_MCR_DTR 0x00000001
116#define PCH_UART_MCR_RTS 0x00000002
117#define PCH_UART_MCR_OUT 0x0000000C
118#define PCH_UART_MCR_LOOP 0x00000010
119#define PCH_UART_MCR_AFE 0x00000020
120
121#define PCH_UART_LSR_DR 0x00000001
122#define PCH_UART_LSR_ERR (1<<7)
123
124#define PCH_UART_MSR_DCTS 0x00000001
125#define PCH_UART_MSR_DDSR 0x00000002
126#define PCH_UART_MSR_TERI 0x00000004
127#define PCH_UART_MSR_DDCD 0x00000008
128#define PCH_UART_MSR_CTS 0x00000010
129#define PCH_UART_MSR_DSR 0x00000020
130#define PCH_UART_MSR_RI 0x00000040
131#define PCH_UART_MSR_DCD 0x00000080
132#define PCH_UART_MSR_DELTA (PCH_UART_MSR_DCTS | PCH_UART_MSR_DDSR |\
133 PCH_UART_MSR_TERI | PCH_UART_MSR_DDCD)
134
135#define PCH_UART_DLL 0x00
136#define PCH_UART_DLM 0x01
137
138#define PCH_UART_BRCSR 0x0E
139
140#define PCH_UART_IID_RLS (PCH_UART_IIR_REI)
141#define PCH_UART_IID_RDR (PCH_UART_IIR_RRI)
142#define PCH_UART_IID_RDR_TO (PCH_UART_IIR_RRI | PCH_UART_IIR_TOI)
143#define PCH_UART_IID_THRE (PCH_UART_IIR_TRI)
144#define PCH_UART_IID_MS (PCH_UART_IIR_MSI)
145
146#define PCH_UART_HAL_PARITY_NONE (PCH_UART_LCR_NP)
147#define PCH_UART_HAL_PARITY_ODD (PCH_UART_LCR_OP)
148#define PCH_UART_HAL_PARITY_EVEN (PCH_UART_LCR_EP)
149#define PCH_UART_HAL_PARITY_FIX1 (PCH_UART_LCR_1P)
150#define PCH_UART_HAL_PARITY_FIX0 (PCH_UART_LCR_0P)
151#define PCH_UART_HAL_5BIT (PCH_UART_LCR_5BIT)
152#define PCH_UART_HAL_6BIT (PCH_UART_LCR_6BIT)
153#define PCH_UART_HAL_7BIT (PCH_UART_LCR_7BIT)
154#define PCH_UART_HAL_8BIT (PCH_UART_LCR_8BIT)
155#define PCH_UART_HAL_STB1 0
156#define PCH_UART_HAL_STB2 (PCH_UART_LCR_STB)
157
158#define PCH_UART_HAL_CLR_TX_FIFO (PCH_UART_FCR_TFR)
159#define PCH_UART_HAL_CLR_RX_FIFO (PCH_UART_FCR_RFR)
160#define PCH_UART_HAL_CLR_ALL_FIFO (PCH_UART_HAL_CLR_TX_FIFO | \
161 PCH_UART_HAL_CLR_RX_FIFO)
162
163#define PCH_UART_HAL_DMA_MODE0 0
164#define PCH_UART_HAL_FIFO_DIS 0
165#define PCH_UART_HAL_FIFO16 (PCH_UART_FCR_FIFOE)
166#define PCH_UART_HAL_FIFO256 (PCH_UART_FCR_FIFOE | \
167 PCH_UART_FCR_FIFO256)
168#define PCH_UART_HAL_FIFO64 (PCH_UART_HAL_FIFO256)
169#define PCH_UART_HAL_TRIGGER1 (PCH_UART_FCR_RFTL1)
170#define PCH_UART_HAL_TRIGGER64 (PCH_UART_FCR_RFTL64)
171#define PCH_UART_HAL_TRIGGER128 (PCH_UART_FCR_RFTL128)
172#define PCH_UART_HAL_TRIGGER224 (PCH_UART_FCR_RFTL224)
173#define PCH_UART_HAL_TRIGGER16 (PCH_UART_FCR_RFTL16)
174#define PCH_UART_HAL_TRIGGER32 (PCH_UART_FCR_RFTL32)
175#define PCH_UART_HAL_TRIGGER56 (PCH_UART_FCR_RFTL56)
176#define PCH_UART_HAL_TRIGGER4 (PCH_UART_FCR_RFTL4)
177#define PCH_UART_HAL_TRIGGER8 (PCH_UART_FCR_RFTL8)
178#define PCH_UART_HAL_TRIGGER14 (PCH_UART_FCR_RFTL14)
179#define PCH_UART_HAL_TRIGGER_L (PCH_UART_FCR_RFTL64)
180#define PCH_UART_HAL_TRIGGER_M (PCH_UART_FCR_RFTL128)
181#define PCH_UART_HAL_TRIGGER_H (PCH_UART_FCR_RFTL224)
182
183#define PCH_UART_HAL_RX_INT (PCH_UART_IER_ERBFI)
184#define PCH_UART_HAL_TX_INT (PCH_UART_IER_ETBEI)
185#define PCH_UART_HAL_RX_ERR_INT (PCH_UART_IER_ELSI)
186#define PCH_UART_HAL_MS_INT (PCH_UART_IER_EDSSI)
187#define PCH_UART_HAL_ALL_INT (PCH_UART_IER_MASK)
188
189#define PCH_UART_HAL_DTR (PCH_UART_MCR_DTR)
190#define PCH_UART_HAL_RTS (PCH_UART_MCR_RTS)
191#define PCH_UART_HAL_OUT (PCH_UART_MCR_OUT)
192#define PCH_UART_HAL_LOOP (PCH_UART_MCR_LOOP)
193#define PCH_UART_HAL_AFE (PCH_UART_MCR_AFE)
194
195#define PCI_VENDOR_ID_ROHM 0x10DB
196
197#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
198
199#define DEFAULT_UARTCLK 1843200 /* 1.8432 MHz */
200#define CMITC_UARTCLK 192000000 /* 192.0000 MHz */
201#define FRI2_64_UARTCLK 64000000 /* 64.0000 MHz */
202#define FRI2_48_UARTCLK 48000000 /* 48.0000 MHz */
203#define NTC1_UARTCLK 64000000 /* 64.0000 MHz */
204#define MINNOW_UARTCLK 50000000 /* 50.0000 MHz */
205
206struct pch_uart_buffer {
207 unsigned char *buf;
208 int size;
209};
210
211struct eg20t_port {
212 struct uart_port port;
213 int port_type;
214 void __iomem *membase;
215 resource_size_t mapbase;
216 unsigned int iobase;
217 struct pci_dev *pdev;
218 int fifo_size;
219 unsigned int uartclk;
220 int start_tx;
221 int start_rx;
222 int tx_empty;
223 int trigger;
224 int trigger_level;
225 struct pch_uart_buffer rxbuf;
226 unsigned int dmsr;
227 unsigned int fcr;
228 unsigned int mcr;
229 unsigned int use_dma;
230 struct dma_async_tx_descriptor *desc_tx;
231 struct dma_async_tx_descriptor *desc_rx;
232 struct pch_dma_slave param_tx;
233 struct pch_dma_slave param_rx;
234 struct dma_chan *chan_tx;
235 struct dma_chan *chan_rx;
236 struct scatterlist *sg_tx_p;
237 int nent;
238 struct scatterlist sg_rx;
239 int tx_dma_use;
240 void *rx_buf_virt;
241 dma_addr_t rx_buf_dma;
242
243 struct dentry *debugfs;
244#define IRQ_NAME_SIZE 17
245 char irq_name[IRQ_NAME_SIZE];
246
247 /* protect the eg20t_port private structure and io access to membase */
248 spinlock_t lock;
249};
250
251/**
252 * struct pch_uart_driver_data - private data structure for UART-DMA
253 * @port_type: The type of UART port
254 * @line_no: UART port line number (0, 1, 2...)
255 */
256struct pch_uart_driver_data {
257 int port_type;
258 int line_no;
259};
260
261enum pch_uart_num_t {
262 pch_et20t_uart0 = 0,
263 pch_et20t_uart1,
264 pch_et20t_uart2,
265 pch_et20t_uart3,
266 pch_ml7213_uart0,
267 pch_ml7213_uart1,
268 pch_ml7213_uart2,
269 pch_ml7223_uart0,
270 pch_ml7223_uart1,
271 pch_ml7831_uart0,
272 pch_ml7831_uart1,
273};
274
275static struct pch_uart_driver_data drv_dat[] = {
276 [pch_et20t_uart0] = {PORT_PCH_8LINE, 0},
277 [pch_et20t_uart1] = {PORT_PCH_2LINE, 1},
278 [pch_et20t_uart2] = {PORT_PCH_2LINE, 2},
279 [pch_et20t_uart3] = {PORT_PCH_2LINE, 3},
280 [pch_ml7213_uart0] = {PORT_PCH_8LINE, 0},
281 [pch_ml7213_uart1] = {PORT_PCH_2LINE, 1},
282 [pch_ml7213_uart2] = {PORT_PCH_2LINE, 2},
283 [pch_ml7223_uart0] = {PORT_PCH_8LINE, 0},
284 [pch_ml7223_uart1] = {PORT_PCH_2LINE, 1},
285 [pch_ml7831_uart0] = {PORT_PCH_8LINE, 0},
286 [pch_ml7831_uart1] = {PORT_PCH_2LINE, 1},
287};
288
289#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
290static struct eg20t_port *pch_uart_ports[PCH_UART_NR];
291#endif
292static unsigned int default_baud = 9600;
293static unsigned int user_uartclk = 0;
294static const int trigger_level_256[4] = { 1, 64, 128, 224 };
295static const int trigger_level_64[4] = { 1, 16, 32, 56 };
296static const int trigger_level_16[4] = { 1, 4, 8, 14 };
297static const int trigger_level_1[4] = { 1, 1, 1, 1 };
298
299#ifdef CONFIG_DEBUG_FS
300
301#define PCH_REGS_BUFSIZE 1024
302
303
304static ssize_t port_show_regs(struct file *file, char __user *user_buf,
305 size_t count, loff_t *ppos)
306{
307 struct eg20t_port *priv = file->private_data;
308 char *buf;
309 u32 len = 0;
310 ssize_t ret;
311 unsigned char lcr;
312
313 buf = kzalloc(PCH_REGS_BUFSIZE, GFP_KERNEL);
314 if (!buf)
315 return 0;
316
317 len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
318 "PCH EG20T port[%d] regs:\n", priv->port.line);
319
320 len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
321 "=================================\n");
322 len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
323 "IER: \t0x%02x\n", ioread8(priv->membase + UART_IER));
324 len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
325 "IIR: \t0x%02x\n", ioread8(priv->membase + UART_IIR));
326 len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
327 "LCR: \t0x%02x\n", ioread8(priv->membase + UART_LCR));
328 len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
329 "MCR: \t0x%02x\n", ioread8(priv->membase + UART_MCR));
330 len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
331 "LSR: \t0x%02x\n", ioread8(priv->membase + UART_LSR));
332 len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
333 "MSR: \t0x%02x\n", ioread8(priv->membase + UART_MSR));
334 len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
335 "BRCSR: \t0x%02x\n",
336 ioread8(priv->membase + PCH_UART_BRCSR));
337
338 lcr = ioread8(priv->membase + UART_LCR);
339 iowrite8(PCH_UART_LCR_DLAB, priv->membase + UART_LCR);
340 len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
341 "DLL: \t0x%02x\n", ioread8(priv->membase + UART_DLL));
342 len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
343 "DLM: \t0x%02x\n", ioread8(priv->membase + UART_DLM));
344 iowrite8(lcr, priv->membase + UART_LCR);
345
346 if (len > PCH_REGS_BUFSIZE)
347 len = PCH_REGS_BUFSIZE;
348
349 ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
350 kfree(buf);
351 return ret;
352}
353
354static const struct file_operations port_regs_ops = {
355 .owner = THIS_MODULE,
356 .open = simple_open,
357 .read = port_show_regs,
358 .llseek = default_llseek,
359};
360#endif /* CONFIG_DEBUG_FS */
361
362static const struct dmi_system_id pch_uart_dmi_table[] = {
363 {
364 .ident = "CM-iTC",
365 {
366 DMI_MATCH(DMI_BOARD_NAME, "CM-iTC"),
367 },
368 (void *)CMITC_UARTCLK,
369 },
370 {
371 .ident = "FRI2",
372 {
373 DMI_MATCH(DMI_BIOS_VERSION, "FRI2"),
374 },
375 (void *)FRI2_64_UARTCLK,
376 },
377 {
378 .ident = "Fish River Island II",
379 {
380 DMI_MATCH(DMI_PRODUCT_NAME, "Fish River Island II"),
381 },
382 (void *)FRI2_48_UARTCLK,
383 },
384 {
385 .ident = "COMe-mTT",
386 {
387 DMI_MATCH(DMI_BOARD_NAME, "COMe-mTT"),
388 },
389 (void *)NTC1_UARTCLK,
390 },
391 {
392 .ident = "nanoETXexpress-TT",
393 {
394 DMI_MATCH(DMI_BOARD_NAME, "nanoETXexpress-TT"),
395 },
396 (void *)NTC1_UARTCLK,
397 },
398 {
399 .ident = "MinnowBoard",
400 {
401 DMI_MATCH(DMI_BOARD_NAME, "MinnowBoard"),
402 },
403 (void *)MINNOW_UARTCLK,
404 },
405 { }
406};
407
408/* Return UART clock, checking for board specific clocks. */
409static unsigned int pch_uart_get_uartclk(void)
410{
411 const struct dmi_system_id *d;
412
413 if (user_uartclk)
414 return user_uartclk;
415
416 d = dmi_first_match(pch_uart_dmi_table);
417 if (d)
418 return (unsigned long)d->driver_data;
419
420 return DEFAULT_UARTCLK;
421}
422
423static void pch_uart_hal_enable_interrupt(struct eg20t_port *priv,
424 unsigned int flag)
425{
426 u8 ier = ioread8(priv->membase + UART_IER);
427 ier |= flag & PCH_UART_IER_MASK;
428 iowrite8(ier, priv->membase + UART_IER);
429}
430
431static void pch_uart_hal_disable_interrupt(struct eg20t_port *priv,
432 unsigned int flag)
433{
434 u8 ier = ioread8(priv->membase + UART_IER);
435 ier &= ~(flag & PCH_UART_IER_MASK);
436 iowrite8(ier, priv->membase + UART_IER);
437}
438
439static int pch_uart_hal_set_line(struct eg20t_port *priv, unsigned int baud,
440 unsigned int parity, unsigned int bits,
441 unsigned int stb)
442{
443 unsigned int dll, dlm, lcr;
444 int div;
445
446 div = DIV_ROUND_CLOSEST(priv->uartclk / 16, baud);
447 if (div < 0 || USHRT_MAX <= div) {
448 dev_err(priv->port.dev, "Invalid Baud(div=0x%x)\n", div);
449 return -EINVAL;
450 }
451
452 dll = (unsigned int)div & 0x00FFU;
453 dlm = ((unsigned int)div >> 8) & 0x00FFU;
454
455 if (parity & ~(PCH_UART_LCR_PEN | PCH_UART_LCR_EPS | PCH_UART_LCR_SP)) {
456 dev_err(priv->port.dev, "Invalid parity(0x%x)\n", parity);
457 return -EINVAL;
458 }
459
460 if (bits & ~PCH_UART_LCR_WLS) {
461 dev_err(priv->port.dev, "Invalid bits(0x%x)\n", bits);
462 return -EINVAL;
463 }
464
465 if (stb & ~PCH_UART_LCR_STB) {
466 dev_err(priv->port.dev, "Invalid STB(0x%x)\n", stb);
467 return -EINVAL;
468 }
469
470 lcr = parity;
471 lcr |= bits;
472 lcr |= stb;
473
474 dev_dbg(priv->port.dev, "%s:baud = %u, div = %04x, lcr = %02x (%lu)\n",
475 __func__, baud, div, lcr, jiffies);
476 iowrite8(PCH_UART_LCR_DLAB, priv->membase + UART_LCR);
477 iowrite8(dll, priv->membase + PCH_UART_DLL);
478 iowrite8(dlm, priv->membase + PCH_UART_DLM);
479 iowrite8(lcr, priv->membase + UART_LCR);
480
481 return 0;
482}
483
484static int pch_uart_hal_fifo_reset(struct eg20t_port *priv,
485 unsigned int flag)
486{
487 if (flag & ~(PCH_UART_FCR_TFR | PCH_UART_FCR_RFR)) {
488 dev_err(priv->port.dev, "%s:Invalid flag(0x%x)\n",
489 __func__, flag);
490 return -EINVAL;
491 }
492
493 iowrite8(PCH_UART_FCR_FIFOE | priv->fcr, priv->membase + UART_FCR);
494 iowrite8(PCH_UART_FCR_FIFOE | priv->fcr | flag,
495 priv->membase + UART_FCR);
496 iowrite8(priv->fcr, priv->membase + UART_FCR);
497
498 return 0;
499}
500
501static int pch_uart_hal_set_fifo(struct eg20t_port *priv,
502 unsigned int dmamode,
503 unsigned int fifo_size, unsigned int trigger)
504{
505 u8 fcr;
506
507 if (dmamode & ~PCH_UART_FCR_DMS) {
508 dev_err(priv->port.dev, "%s:Invalid DMA Mode(0x%x)\n",
509 __func__, dmamode);
510 return -EINVAL;
511 }
512
513 if (fifo_size & ~(PCH_UART_FCR_FIFOE | PCH_UART_FCR_FIFO256)) {
514 dev_err(priv->port.dev, "%s:Invalid FIFO SIZE(0x%x)\n",
515 __func__, fifo_size);
516 return -EINVAL;
517 }
518
519 if (trigger & ~PCH_UART_FCR_RFTL) {
520 dev_err(priv->port.dev, "%s:Invalid TRIGGER(0x%x)\n",
521 __func__, trigger);
522 return -EINVAL;
523 }
524
525 switch (priv->fifo_size) {
526 case 256:
527 priv->trigger_level =
528 trigger_level_256[trigger >> PCH_UART_FCR_RFTL_SHIFT];
529 break;
530 case 64:
531 priv->trigger_level =
532 trigger_level_64[trigger >> PCH_UART_FCR_RFTL_SHIFT];
533 break;
534 case 16:
535 priv->trigger_level =
536 trigger_level_16[trigger >> PCH_UART_FCR_RFTL_SHIFT];
537 break;
538 default:
539 priv->trigger_level =
540 trigger_level_1[trigger >> PCH_UART_FCR_RFTL_SHIFT];
541 break;
542 }
543 fcr =
544 dmamode | fifo_size | trigger | PCH_UART_FCR_RFR | PCH_UART_FCR_TFR;
545 iowrite8(PCH_UART_FCR_FIFOE, priv->membase + UART_FCR);
546 iowrite8(PCH_UART_FCR_FIFOE | PCH_UART_FCR_RFR | PCH_UART_FCR_TFR,
547 priv->membase + UART_FCR);
548 iowrite8(fcr, priv->membase + UART_FCR);
549 priv->fcr = fcr;
550
551 return 0;
552}
553
554static u8 pch_uart_hal_get_modem(struct eg20t_port *priv)
555{
556 unsigned int msr = ioread8(priv->membase + UART_MSR);
557 priv->dmsr = msr & PCH_UART_MSR_DELTA;
558 return (u8)msr;
559}
560
561static void pch_uart_hal_write(struct eg20t_port *priv,
562 const unsigned char *buf, int tx_size)
563{
564 int i;
565 unsigned int thr;
566
567 for (i = 0; i < tx_size;) {
568 thr = buf[i++];
569 iowrite8(thr, priv->membase + PCH_UART_THR);
570 }
571}
572
573static int pch_uart_hal_read(struct eg20t_port *priv, unsigned char *buf,
574 int rx_size)
575{
576 int i;
577 u8 rbr, lsr;
578 struct uart_port *port = &priv->port;
579
580 lsr = ioread8(priv->membase + UART_LSR);
581 for (i = 0, lsr = ioread8(priv->membase + UART_LSR);
582 i < rx_size && lsr & (UART_LSR_DR | UART_LSR_BI);
583 lsr = ioread8(priv->membase + UART_LSR)) {
584 rbr = ioread8(priv->membase + PCH_UART_RBR);
585
586 if (lsr & UART_LSR_BI) {
587 port->icount.brk++;
588 if (uart_handle_break(port))
589 continue;
590 }
591#ifdef SUPPORT_SYSRQ
592 if (port->sysrq) {
593 if (uart_handle_sysrq_char(port, rbr))
594 continue;
595 }
596#endif
597
598 buf[i++] = rbr;
599 }
600 return i;
601}
602
603static unsigned char pch_uart_hal_get_iid(struct eg20t_port *priv)
604{
605 return ioread8(priv->membase + UART_IIR) &\
606 (PCH_UART_IIR_IID | PCH_UART_IIR_TOI | PCH_UART_IIR_IP);
607}
608
609static u8 pch_uart_hal_get_line_status(struct eg20t_port *priv)
610{
611 return ioread8(priv->membase + UART_LSR);
612}
613
614static void pch_uart_hal_set_break(struct eg20t_port *priv, int on)
615{
616 unsigned int lcr;
617
618 lcr = ioread8(priv->membase + UART_LCR);
619 if (on)
620 lcr |= PCH_UART_LCR_SB;
621 else
622 lcr &= ~PCH_UART_LCR_SB;
623
624 iowrite8(lcr, priv->membase + UART_LCR);
625}
626
627static int push_rx(struct eg20t_port *priv, const unsigned char *buf,
628 int size)
629{
630 struct uart_port *port = &priv->port;
631 struct tty_port *tport = &port->state->port;
632
633 tty_insert_flip_string(tport, buf, size);
634 tty_flip_buffer_push(tport);
635
636 return 0;
637}
638
639static int pop_tx_x(struct eg20t_port *priv, unsigned char *buf)
640{
641 int ret = 0;
642 struct uart_port *port = &priv->port;
643
644 if (port->x_char) {
645 dev_dbg(priv->port.dev, "%s:X character send %02x (%lu)\n",
646 __func__, port->x_char, jiffies);
647 buf[0] = port->x_char;
648 port->x_char = 0;
649 ret = 1;
650 }
651
652 return ret;
653}
654
655static int dma_push_rx(struct eg20t_port *priv, int size)
656{
657 int room;
658 struct uart_port *port = &priv->port;
659 struct tty_port *tport = &port->state->port;
660
661 room = tty_buffer_request_room(tport, size);
662
663 if (room < size)
664 dev_warn(port->dev, "Rx overrun: dropping %u bytes\n",
665 size - room);
666 if (!room)
667 return 0;
668
669 tty_insert_flip_string(tport, sg_virt(&priv->sg_rx), size);
670
671 port->icount.rx += room;
672
673 return room;
674}
675
676static void pch_free_dma(struct uart_port *port)
677{
678 struct eg20t_port *priv;
679 priv = container_of(port, struct eg20t_port, port);
680
681 if (priv->chan_tx) {
682 dma_release_channel(priv->chan_tx);
683 priv->chan_tx = NULL;
684 }
685 if (priv->chan_rx) {
686 dma_release_channel(priv->chan_rx);
687 priv->chan_rx = NULL;
688 }
689
690 if (priv->rx_buf_dma) {
691 dma_free_coherent(port->dev, port->fifosize, priv->rx_buf_virt,
692 priv->rx_buf_dma);
693 priv->rx_buf_virt = NULL;
694 priv->rx_buf_dma = 0;
695 }
696
697 return;
698}
699
700static bool filter(struct dma_chan *chan, void *slave)
701{
702 struct pch_dma_slave *param = slave;
703
704 if ((chan->chan_id == param->chan_id) && (param->dma_dev ==
705 chan->device->dev)) {
706 chan->private = param;
707 return true;
708 } else {
709 return false;
710 }
711}
712
713static void pch_request_dma(struct uart_port *port)
714{
715 dma_cap_mask_t mask;
716 struct dma_chan *chan;
717 struct pci_dev *dma_dev;
718 struct pch_dma_slave *param;
719 struct eg20t_port *priv =
720 container_of(port, struct eg20t_port, port);
721 dma_cap_zero(mask);
722 dma_cap_set(DMA_SLAVE, mask);
723
724 /* Get DMA's dev information */
725 dma_dev = pci_get_slot(priv->pdev->bus,
726 PCI_DEVFN(PCI_SLOT(priv->pdev->devfn), 0));
727
728 /* Set Tx DMA */
729 param = &priv->param_tx;
730 param->dma_dev = &dma_dev->dev;
731 param->chan_id = priv->port.line * 2; /* Tx = 0, 2, 4, ... */
732
733 param->tx_reg = port->mapbase + UART_TX;
734 chan = dma_request_channel(mask, filter, param);
735 if (!chan) {
736 dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Tx)\n",
737 __func__);
738 return;
739 }
740 priv->chan_tx = chan;
741
742 /* Set Rx DMA */
743 param = &priv->param_rx;
744 param->dma_dev = &dma_dev->dev;
745 param->chan_id = priv->port.line * 2 + 1; /* Rx = Tx + 1 */
746
747 param->rx_reg = port->mapbase + UART_RX;
748 chan = dma_request_channel(mask, filter, param);
749 if (!chan) {
750 dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Rx)\n",
751 __func__);
752 dma_release_channel(priv->chan_tx);
753 priv->chan_tx = NULL;
754 return;
755 }
756
757 /* Get Consistent memory for DMA */
758 priv->rx_buf_virt = dma_alloc_coherent(port->dev, port->fifosize,
759 &priv->rx_buf_dma, GFP_KERNEL);
760 priv->chan_rx = chan;
761}
762
763static void pch_dma_rx_complete(void *arg)
764{
765 struct eg20t_port *priv = arg;
766 struct uart_port *port = &priv->port;
767 int count;
768
769 dma_sync_sg_for_cpu(port->dev, &priv->sg_rx, 1, DMA_FROM_DEVICE);
770 count = dma_push_rx(priv, priv->trigger_level);
771 if (count)
772 tty_flip_buffer_push(&port->state->port);
773 async_tx_ack(priv->desc_rx);
774 pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT |
775 PCH_UART_HAL_RX_ERR_INT);
776}
777
778static void pch_dma_tx_complete(void *arg)
779{
780 struct eg20t_port *priv = arg;
781 struct uart_port *port = &priv->port;
782 struct circ_buf *xmit = &port->state->xmit;
783 struct scatterlist *sg = priv->sg_tx_p;
784 int i;
785
786 for (i = 0; i < priv->nent; i++, sg++) {
787 xmit->tail += sg_dma_len(sg);
788 port->icount.tx += sg_dma_len(sg);
789 }
790 xmit->tail &= UART_XMIT_SIZE - 1;
791 async_tx_ack(priv->desc_tx);
792 dma_unmap_sg(port->dev, sg, priv->nent, DMA_TO_DEVICE);
793 priv->tx_dma_use = 0;
794 priv->nent = 0;
795 kfree(priv->sg_tx_p);
796 pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT);
797}
798
799static int pop_tx(struct eg20t_port *priv, int size)
800{
801 int count = 0;
802 struct uart_port *port = &priv->port;
803 struct circ_buf *xmit = &port->state->xmit;
804
805 if (uart_tx_stopped(port) || uart_circ_empty(xmit) || count >= size)
806 goto pop_tx_end;
807
808 do {
809 int cnt_to_end =
810 CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
811 int sz = min(size - count, cnt_to_end);
812 pch_uart_hal_write(priv, &xmit->buf[xmit->tail], sz);
813 xmit->tail = (xmit->tail + sz) & (UART_XMIT_SIZE - 1);
814 count += sz;
815 } while (!uart_circ_empty(xmit) && count < size);
816
817pop_tx_end:
818 dev_dbg(priv->port.dev, "%d characters. Remained %d characters.(%lu)\n",
819 count, size - count, jiffies);
820
821 return count;
822}
823
824static int handle_rx_to(struct eg20t_port *priv)
825{
826 struct pch_uart_buffer *buf;
827 int rx_size;
828 int ret;
829 if (!priv->start_rx) {
830 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT |
831 PCH_UART_HAL_RX_ERR_INT);
832 return 0;
833 }
834 buf = &priv->rxbuf;
835 do {
836 rx_size = pch_uart_hal_read(priv, buf->buf, buf->size);
837 ret = push_rx(priv, buf->buf, rx_size);
838 if (ret)
839 return 0;
840 } while (rx_size == buf->size);
841
842 return PCH_UART_HANDLED_RX_INT;
843}
844
845static int handle_rx(struct eg20t_port *priv)
846{
847 return handle_rx_to(priv);
848}
849
850static int dma_handle_rx(struct eg20t_port *priv)
851{
852 struct uart_port *port = &priv->port;
853 struct dma_async_tx_descriptor *desc;
854 struct scatterlist *sg;
855
856 priv = container_of(port, struct eg20t_port, port);
857 sg = &priv->sg_rx;
858
859 sg_init_table(&priv->sg_rx, 1); /* Initialize SG table */
860
861 sg_dma_len(sg) = priv->trigger_level;
862
863 sg_set_page(&priv->sg_rx, virt_to_page(priv->rx_buf_virt),
864 sg_dma_len(sg), offset_in_page(priv->rx_buf_virt));
865
866 sg_dma_address(sg) = priv->rx_buf_dma;
867
868 desc = dmaengine_prep_slave_sg(priv->chan_rx,
869 sg, 1, DMA_DEV_TO_MEM,
870 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
871
872 if (!desc)
873 return 0;
874
875 priv->desc_rx = desc;
876 desc->callback = pch_dma_rx_complete;
877 desc->callback_param = priv;
878 desc->tx_submit(desc);
879 dma_async_issue_pending(priv->chan_rx);
880
881 return PCH_UART_HANDLED_RX_INT;
882}
883
884static unsigned int handle_tx(struct eg20t_port *priv)
885{
886 struct uart_port *port = &priv->port;
887 struct circ_buf *xmit = &port->state->xmit;
888 int fifo_size;
889 int tx_size;
890 int size;
891 int tx_empty;
892
893 if (!priv->start_tx) {
894 dev_info(priv->port.dev, "%s:Tx isn't started. (%lu)\n",
895 __func__, jiffies);
896 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
897 priv->tx_empty = 1;
898 return 0;
899 }
900
901 fifo_size = max(priv->fifo_size, 1);
902 tx_empty = 1;
903 if (pop_tx_x(priv, xmit->buf)) {
904 pch_uart_hal_write(priv, xmit->buf, 1);
905 port->icount.tx++;
906 tx_empty = 0;
907 fifo_size--;
908 }
909 size = min(xmit->head - xmit->tail, fifo_size);
910 if (size < 0)
911 size = fifo_size;
912
913 tx_size = pop_tx(priv, size);
914 if (tx_size > 0) {
915 port->icount.tx += tx_size;
916 tx_empty = 0;
917 }
918
919 priv->tx_empty = tx_empty;
920
921 if (tx_empty) {
922 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
923 uart_write_wakeup(port);
924 }
925
926 return PCH_UART_HANDLED_TX_INT;
927}
928
929static unsigned int dma_handle_tx(struct eg20t_port *priv)
930{
931 struct uart_port *port = &priv->port;
932 struct circ_buf *xmit = &port->state->xmit;
933 struct scatterlist *sg;
934 int nent;
935 int fifo_size;
936 int tx_empty;
937 struct dma_async_tx_descriptor *desc;
938 int num;
939 int i;
940 int bytes;
941 int size;
942 int rem;
943
944 if (!priv->start_tx) {
945 dev_info(priv->port.dev, "%s:Tx isn't started. (%lu)\n",
946 __func__, jiffies);
947 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
948 priv->tx_empty = 1;
949 return 0;
950 }
951
952 if (priv->tx_dma_use) {
953 dev_dbg(priv->port.dev, "%s:Tx is not completed. (%lu)\n",
954 __func__, jiffies);
955 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
956 priv->tx_empty = 1;
957 return 0;
958 }
959
960 fifo_size = max(priv->fifo_size, 1);
961 tx_empty = 1;
962 if (pop_tx_x(priv, xmit->buf)) {
963 pch_uart_hal_write(priv, xmit->buf, 1);
964 port->icount.tx++;
965 tx_empty = 0;
966 fifo_size--;
967 }
968
969 bytes = min((int)CIRC_CNT(xmit->head, xmit->tail,
970 UART_XMIT_SIZE), CIRC_CNT_TO_END(xmit->head,
971 xmit->tail, UART_XMIT_SIZE));
972 if (!bytes) {
973 dev_dbg(priv->port.dev, "%s 0 bytes return\n", __func__);
974 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
975 uart_write_wakeup(port);
976 return 0;
977 }
978
979 if (bytes > fifo_size) {
980 num = bytes / fifo_size + 1;
981 size = fifo_size;
982 rem = bytes % fifo_size;
983 } else {
984 num = 1;
985 size = bytes;
986 rem = bytes;
987 }
988
989 dev_dbg(priv->port.dev, "%s num=%d size=%d rem=%d\n",
990 __func__, num, size, rem);
991
992 priv->tx_dma_use = 1;
993
994 priv->sg_tx_p = kzalloc(sizeof(struct scatterlist)*num, GFP_ATOMIC);
995 if (!priv->sg_tx_p) {
996 dev_err(priv->port.dev, "%s:kzalloc Failed\n", __func__);
997 return 0;
998 }
999
1000 sg_init_table(priv->sg_tx_p, num); /* Initialize SG table */
1001 sg = priv->sg_tx_p;
1002
1003 for (i = 0; i < num; i++, sg++) {
1004 if (i == (num - 1))
1005 sg_set_page(sg, virt_to_page(xmit->buf),
1006 rem, fifo_size * i);
1007 else
1008 sg_set_page(sg, virt_to_page(xmit->buf),
1009 size, fifo_size * i);
1010 }
1011
1012 sg = priv->sg_tx_p;
1013 nent = dma_map_sg(port->dev, sg, num, DMA_TO_DEVICE);
1014 if (!nent) {
1015 dev_err(priv->port.dev, "%s:dma_map_sg Failed\n", __func__);
1016 return 0;
1017 }
1018 priv->nent = nent;
1019
1020 for (i = 0; i < nent; i++, sg++) {
1021 sg->offset = (xmit->tail & (UART_XMIT_SIZE - 1)) +
1022 fifo_size * i;
1023 sg_dma_address(sg) = (sg_dma_address(sg) &
1024 ~(UART_XMIT_SIZE - 1)) + sg->offset;
1025 if (i == (nent - 1))
1026 sg_dma_len(sg) = rem;
1027 else
1028 sg_dma_len(sg) = size;
1029 }
1030
1031 desc = dmaengine_prep_slave_sg(priv->chan_tx,
1032 priv->sg_tx_p, nent, DMA_MEM_TO_DEV,
1033 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
1034 if (!desc) {
1035 dev_err(priv->port.dev, "%s:dmaengine_prep_slave_sg Failed\n",
1036 __func__);
1037 return 0;
1038 }
1039 dma_sync_sg_for_device(port->dev, priv->sg_tx_p, nent, DMA_TO_DEVICE);
1040 priv->desc_tx = desc;
1041 desc->callback = pch_dma_tx_complete;
1042 desc->callback_param = priv;
1043
1044 desc->tx_submit(desc);
1045
1046 dma_async_issue_pending(priv->chan_tx);
1047
1048 return PCH_UART_HANDLED_TX_INT;
1049}
1050
1051static void pch_uart_err_ir(struct eg20t_port *priv, unsigned int lsr)
1052{
1053 struct uart_port *port = &priv->port;
1054 struct tty_struct *tty = tty_port_tty_get(&port->state->port);
1055 char *error_msg[5] = {};
1056 int i = 0;
1057
1058 if (lsr & PCH_UART_LSR_ERR)
1059 error_msg[i++] = "Error data in FIFO\n";
1060
1061 if (lsr & UART_LSR_FE) {
1062 port->icount.frame++;
1063 error_msg[i++] = " Framing Error\n";
1064 }
1065
1066 if (lsr & UART_LSR_PE) {
1067 port->icount.parity++;
1068 error_msg[i++] = " Parity Error\n";
1069 }
1070
1071 if (lsr & UART_LSR_OE) {
1072 port->icount.overrun++;
1073 error_msg[i++] = " Overrun Error\n";
1074 }
1075
1076 if (tty == NULL) {
1077 for (i = 0; error_msg[i] != NULL; i++)
1078 dev_err(&priv->pdev->dev, error_msg[i]);
1079 } else {
1080 tty_kref_put(tty);
1081 }
1082}
1083
1084static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
1085{
1086 struct eg20t_port *priv = dev_id;
1087 unsigned int handled;
1088 u8 lsr;
1089 int ret = 0;
1090 unsigned char iid;
1091 unsigned long flags;
1092 int next = 1;
1093 u8 msr;
1094
1095 spin_lock_irqsave(&priv->lock, flags);
1096 handled = 0;
1097 while (next) {
1098 iid = pch_uart_hal_get_iid(priv);
1099 if (iid & PCH_UART_IIR_IP) /* No Interrupt */
1100 break;
1101 switch (iid) {
1102 case PCH_UART_IID_RLS: /* Receiver Line Status */
1103 lsr = pch_uart_hal_get_line_status(priv);
1104 if (lsr & (PCH_UART_LSR_ERR | UART_LSR_FE |
1105 UART_LSR_PE | UART_LSR_OE)) {
1106 pch_uart_err_ir(priv, lsr);
1107 ret = PCH_UART_HANDLED_RX_ERR_INT;
1108 } else {
1109 ret = PCH_UART_HANDLED_LS_INT;
1110 }
1111 break;
1112 case PCH_UART_IID_RDR: /* Received Data Ready */
1113 if (priv->use_dma) {
1114 pch_uart_hal_disable_interrupt(priv,
1115 PCH_UART_HAL_RX_INT |
1116 PCH_UART_HAL_RX_ERR_INT);
1117 ret = dma_handle_rx(priv);
1118 if (!ret)
1119 pch_uart_hal_enable_interrupt(priv,
1120 PCH_UART_HAL_RX_INT |
1121 PCH_UART_HAL_RX_ERR_INT);
1122 } else {
1123 ret = handle_rx(priv);
1124 }
1125 break;
1126 case PCH_UART_IID_RDR_TO: /* Received Data Ready
1127 (FIFO Timeout) */
1128 ret = handle_rx_to(priv);
1129 break;
1130 case PCH_UART_IID_THRE: /* Transmitter Holding Register
1131 Empty */
1132 if (priv->use_dma)
1133 ret = dma_handle_tx(priv);
1134 else
1135 ret = handle_tx(priv);
1136 break;
1137 case PCH_UART_IID_MS: /* Modem Status */
1138 msr = pch_uart_hal_get_modem(priv);
1139 next = 0; /* MS ir prioirty is the lowest. So, MS ir
1140 means final interrupt */
1141 if ((msr & UART_MSR_ANY_DELTA) == 0)
1142 break;
1143 ret |= PCH_UART_HANDLED_MS_INT;
1144 break;
1145 default: /* Never junp to this label */
1146 dev_err(priv->port.dev, "%s:iid=%02x (%lu)\n", __func__,
1147 iid, jiffies);
1148 ret = -1;
1149 next = 0;
1150 break;
1151 }
1152 handled |= (unsigned int)ret;
1153 }
1154
1155 spin_unlock_irqrestore(&priv->lock, flags);
1156 return IRQ_RETVAL(handled);
1157}
1158
1159/* This function tests whether the transmitter fifo and shifter for the port
1160 described by 'port' is empty. */
1161static unsigned int pch_uart_tx_empty(struct uart_port *port)
1162{
1163 struct eg20t_port *priv;
1164
1165 priv = container_of(port, struct eg20t_port, port);
1166 if (priv->tx_empty)
1167 return TIOCSER_TEMT;
1168 else
1169 return 0;
1170}
1171
1172/* Returns the current state of modem control inputs. */
1173static unsigned int pch_uart_get_mctrl(struct uart_port *port)
1174{
1175 struct eg20t_port *priv;
1176 u8 modem;
1177 unsigned int ret = 0;
1178
1179 priv = container_of(port, struct eg20t_port, port);
1180 modem = pch_uart_hal_get_modem(priv);
1181
1182 if (modem & UART_MSR_DCD)
1183 ret |= TIOCM_CAR;
1184
1185 if (modem & UART_MSR_RI)
1186 ret |= TIOCM_RNG;
1187
1188 if (modem & UART_MSR_DSR)
1189 ret |= TIOCM_DSR;
1190
1191 if (modem & UART_MSR_CTS)
1192 ret |= TIOCM_CTS;
1193
1194 return ret;
1195}
1196
1197static void pch_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
1198{
1199 u32 mcr = 0;
1200 struct eg20t_port *priv = container_of(port, struct eg20t_port, port);
1201
1202 if (mctrl & TIOCM_DTR)
1203 mcr |= UART_MCR_DTR;
1204 if (mctrl & TIOCM_RTS)
1205 mcr |= UART_MCR_RTS;
1206 if (mctrl & TIOCM_LOOP)
1207 mcr |= UART_MCR_LOOP;
1208
1209 if (priv->mcr & UART_MCR_AFE)
1210 mcr |= UART_MCR_AFE;
1211
1212 if (mctrl)
1213 iowrite8(mcr, priv->membase + UART_MCR);
1214}
1215
1216static void pch_uart_stop_tx(struct uart_port *port)
1217{
1218 struct eg20t_port *priv;
1219 priv = container_of(port, struct eg20t_port, port);
1220 priv->start_tx = 0;
1221 priv->tx_dma_use = 0;
1222}
1223
1224static void pch_uart_start_tx(struct uart_port *port)
1225{
1226 struct eg20t_port *priv;
1227
1228 priv = container_of(port, struct eg20t_port, port);
1229
1230 if (priv->use_dma) {
1231 if (priv->tx_dma_use) {
1232 dev_dbg(priv->port.dev, "%s : Tx DMA is NOT empty.\n",
1233 __func__);
1234 return;
1235 }
1236 }
1237
1238 priv->start_tx = 1;
1239 pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT);
1240}
1241
1242static void pch_uart_stop_rx(struct uart_port *port)
1243{
1244 struct eg20t_port *priv;
1245 priv = container_of(port, struct eg20t_port, port);
1246 priv->start_rx = 0;
1247 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT |
1248 PCH_UART_HAL_RX_ERR_INT);
1249}
1250
1251/* Enable the modem status interrupts. */
1252static void pch_uart_enable_ms(struct uart_port *port)
1253{
1254 struct eg20t_port *priv;
1255 priv = container_of(port, struct eg20t_port, port);
1256 pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_MS_INT);
1257}
1258
1259/* Control the transmission of a break signal. */
1260static void pch_uart_break_ctl(struct uart_port *port, int ctl)
1261{
1262 struct eg20t_port *priv;
1263 unsigned long flags;
1264
1265 priv = container_of(port, struct eg20t_port, port);
1266 spin_lock_irqsave(&priv->lock, flags);
1267 pch_uart_hal_set_break(priv, ctl);
1268 spin_unlock_irqrestore(&priv->lock, flags);
1269}
1270
1271/* Grab any interrupt resources and initialise any low level driver state. */
1272static int pch_uart_startup(struct uart_port *port)
1273{
1274 struct eg20t_port *priv;
1275 int ret;
1276 int fifo_size;
1277 int trigger_level;
1278
1279 priv = container_of(port, struct eg20t_port, port);
1280 priv->tx_empty = 1;
1281
1282 if (port->uartclk)
1283 priv->uartclk = port->uartclk;
1284 else
1285 port->uartclk = priv->uartclk;
1286
1287 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
1288 ret = pch_uart_hal_set_line(priv, default_baud,
1289 PCH_UART_HAL_PARITY_NONE, PCH_UART_HAL_8BIT,
1290 PCH_UART_HAL_STB1);
1291 if (ret)
1292 return ret;
1293
1294 switch (priv->fifo_size) {
1295 case 256:
1296 fifo_size = PCH_UART_HAL_FIFO256;
1297 break;
1298 case 64:
1299 fifo_size = PCH_UART_HAL_FIFO64;
1300 break;
1301 case 16:
1302 fifo_size = PCH_UART_HAL_FIFO16;
1303 break;
1304 case 1:
1305 default:
1306 fifo_size = PCH_UART_HAL_FIFO_DIS;
1307 break;
1308 }
1309
1310 switch (priv->trigger) {
1311 case PCH_UART_HAL_TRIGGER1:
1312 trigger_level = 1;
1313 break;
1314 case PCH_UART_HAL_TRIGGER_L:
1315 trigger_level = priv->fifo_size / 4;
1316 break;
1317 case PCH_UART_HAL_TRIGGER_M:
1318 trigger_level = priv->fifo_size / 2;
1319 break;
1320 case PCH_UART_HAL_TRIGGER_H:
1321 default:
1322 trigger_level = priv->fifo_size - (priv->fifo_size / 8);
1323 break;
1324 }
1325
1326 priv->trigger_level = trigger_level;
1327 ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0,
1328 fifo_size, priv->trigger);
1329 if (ret < 0)
1330 return ret;
1331
1332 ret = request_irq(priv->port.irq, pch_uart_interrupt, IRQF_SHARED,
1333 priv->irq_name, priv);
1334 if (ret < 0)
1335 return ret;
1336
1337 if (priv->use_dma)
1338 pch_request_dma(port);
1339
1340 priv->start_rx = 1;
1341 pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT |
1342 PCH_UART_HAL_RX_ERR_INT);
1343 uart_update_timeout(port, CS8, default_baud);
1344
1345 return 0;
1346}
1347
1348static void pch_uart_shutdown(struct uart_port *port)
1349{
1350 struct eg20t_port *priv;
1351 int ret;
1352
1353 priv = container_of(port, struct eg20t_port, port);
1354 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
1355 pch_uart_hal_fifo_reset(priv, PCH_UART_HAL_CLR_ALL_FIFO);
1356 ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0,
1357 PCH_UART_HAL_FIFO_DIS, PCH_UART_HAL_TRIGGER1);
1358 if (ret)
1359 dev_err(priv->port.dev,
1360 "pch_uart_hal_set_fifo Failed(ret=%d)\n", ret);
1361
1362 pch_free_dma(port);
1363
1364 free_irq(priv->port.irq, priv);
1365}
1366
1367/* Change the port parameters, including word length, parity, stop
1368 *bits. Update read_status_mask and ignore_status_mask to indicate
1369 *the types of events we are interested in receiving. */
1370static void pch_uart_set_termios(struct uart_port *port,
1371 struct ktermios *termios, struct ktermios *old)
1372{
1373 int rtn;
1374 unsigned int baud, parity, bits, stb;
1375 struct eg20t_port *priv;
1376 unsigned long flags;
1377
1378 priv = container_of(port, struct eg20t_port, port);
1379 switch (termios->c_cflag & CSIZE) {
1380 case CS5:
1381 bits = PCH_UART_HAL_5BIT;
1382 break;
1383 case CS6:
1384 bits = PCH_UART_HAL_6BIT;
1385 break;
1386 case CS7:
1387 bits = PCH_UART_HAL_7BIT;
1388 break;
1389 default: /* CS8 */
1390 bits = PCH_UART_HAL_8BIT;
1391 break;
1392 }
1393 if (termios->c_cflag & CSTOPB)
1394 stb = PCH_UART_HAL_STB2;
1395 else
1396 stb = PCH_UART_HAL_STB1;
1397
1398 if (termios->c_cflag & PARENB) {
1399 if (termios->c_cflag & PARODD)
1400 parity = PCH_UART_HAL_PARITY_ODD;
1401 else
1402 parity = PCH_UART_HAL_PARITY_EVEN;
1403
1404 } else
1405 parity = PCH_UART_HAL_PARITY_NONE;
1406
1407 /* Only UART0 has auto hardware flow function */
1408 if ((termios->c_cflag & CRTSCTS) && (priv->fifo_size == 256))
1409 priv->mcr |= UART_MCR_AFE;
1410 else
1411 priv->mcr &= ~UART_MCR_AFE;
1412
1413 termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */
1414
1415 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
1416
1417 spin_lock_irqsave(&priv->lock, flags);
1418 spin_lock(&port->lock);
1419
1420 uart_update_timeout(port, termios->c_cflag, baud);
1421 rtn = pch_uart_hal_set_line(priv, baud, parity, bits, stb);
1422 if (rtn)
1423 goto out;
1424
1425 pch_uart_set_mctrl(&priv->port, priv->port.mctrl);
1426 /* Don't rewrite B0 */
1427 if (tty_termios_baud_rate(termios))
1428 tty_termios_encode_baud_rate(termios, baud, baud);
1429
1430out:
1431 spin_unlock(&port->lock);
1432 spin_unlock_irqrestore(&priv->lock, flags);
1433}
1434
1435static const char *pch_uart_type(struct uart_port *port)
1436{
1437 return KBUILD_MODNAME;
1438}
1439
1440static void pch_uart_release_port(struct uart_port *port)
1441{
1442 struct eg20t_port *priv;
1443
1444 priv = container_of(port, struct eg20t_port, port);
1445 pci_iounmap(priv->pdev, priv->membase);
1446 pci_release_regions(priv->pdev);
1447}
1448
1449static int pch_uart_request_port(struct uart_port *port)
1450{
1451 struct eg20t_port *priv;
1452 int ret;
1453 void __iomem *membase;
1454
1455 priv = container_of(port, struct eg20t_port, port);
1456 ret = pci_request_regions(priv->pdev, KBUILD_MODNAME);
1457 if (ret < 0)
1458 return -EBUSY;
1459
1460 membase = pci_iomap(priv->pdev, 1, 0);
1461 if (!membase) {
1462 pci_release_regions(priv->pdev);
1463 return -EBUSY;
1464 }
1465 priv->membase = port->membase = membase;
1466
1467 return 0;
1468}
1469
1470static void pch_uart_config_port(struct uart_port *port, int type)
1471{
1472 struct eg20t_port *priv;
1473
1474 priv = container_of(port, struct eg20t_port, port);
1475 if (type & UART_CONFIG_TYPE) {
1476 port->type = priv->port_type;
1477 pch_uart_request_port(port);
1478 }
1479}
1480
1481static int pch_uart_verify_port(struct uart_port *port,
1482 struct serial_struct *serinfo)
1483{
1484 struct eg20t_port *priv;
1485
1486 priv = container_of(port, struct eg20t_port, port);
1487 if (serinfo->flags & UPF_LOW_LATENCY) {
1488 dev_info(priv->port.dev,
1489 "PCH UART : Use PIO Mode (without DMA)\n");
1490 priv->use_dma = 0;
1491 serinfo->flags &= ~UPF_LOW_LATENCY;
1492 } else {
1493#ifndef CONFIG_PCH_DMA
1494 dev_err(priv->port.dev, "%s : PCH DMA is not Loaded.\n",
1495 __func__);
1496 return -EOPNOTSUPP;
1497#endif
1498 if (!priv->use_dma) {
1499 pch_request_dma(port);
1500 if (priv->chan_rx)
1501 priv->use_dma = 1;
1502 }
1503 dev_info(priv->port.dev, "PCH UART: %s\n",
1504 priv->use_dma ?
1505 "Use DMA Mode" : "No DMA");
1506 }
1507
1508 return 0;
1509}
1510
1511#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_PCH_UART_CONSOLE)
1512/*
1513 * Wait for transmitter & holding register to empty
1514 */
1515static void wait_for_xmitr(struct eg20t_port *up, int bits)
1516{
1517 unsigned int status, tmout = 10000;
1518
1519 /* Wait up to 10ms for the character(s) to be sent. */
1520 for (;;) {
1521 status = ioread8(up->membase + UART_LSR);
1522
1523 if ((status & bits) == bits)
1524 break;
1525 if (--tmout == 0)
1526 break;
1527 udelay(1);
1528 }
1529
1530 /* Wait up to 1s for flow control if necessary */
1531 if (up->port.flags & UPF_CONS_FLOW) {
1532 unsigned int tmout;
1533 for (tmout = 1000000; tmout; tmout--) {
1534 unsigned int msr = ioread8(up->membase + UART_MSR);
1535 if (msr & UART_MSR_CTS)
1536 break;
1537 udelay(1);
1538 touch_nmi_watchdog();
1539 }
1540 }
1541}
1542#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_PCH_UART_CONSOLE */
1543
1544#ifdef CONFIG_CONSOLE_POLL
1545/*
1546 * Console polling routines for communicate via uart while
1547 * in an interrupt or debug context.
1548 */
1549static int pch_uart_get_poll_char(struct uart_port *port)
1550{
1551 struct eg20t_port *priv =
1552 container_of(port, struct eg20t_port, port);
1553 u8 lsr = ioread8(priv->membase + UART_LSR);
1554
1555 if (!(lsr & UART_LSR_DR))
1556 return NO_POLL_CHAR;
1557
1558 return ioread8(priv->membase + PCH_UART_RBR);
1559}
1560
1561
1562static void pch_uart_put_poll_char(struct uart_port *port,
1563 unsigned char c)
1564{
1565 unsigned int ier;
1566 struct eg20t_port *priv =
1567 container_of(port, struct eg20t_port, port);
1568
1569 /*
1570 * First save the IER then disable the interrupts
1571 */
1572 ier = ioread8(priv->membase + UART_IER);
1573 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
1574
1575 wait_for_xmitr(priv, UART_LSR_THRE);
1576 /*
1577 * Send the character out.
1578 */
1579 iowrite8(c, priv->membase + PCH_UART_THR);
1580
1581 /*
1582 * Finally, wait for transmitter to become empty
1583 * and restore the IER
1584 */
1585 wait_for_xmitr(priv, BOTH_EMPTY);
1586 iowrite8(ier, priv->membase + UART_IER);
1587}
1588#endif /* CONFIG_CONSOLE_POLL */
1589
1590static const struct uart_ops pch_uart_ops = {
1591 .tx_empty = pch_uart_tx_empty,
1592 .set_mctrl = pch_uart_set_mctrl,
1593 .get_mctrl = pch_uart_get_mctrl,
1594 .stop_tx = pch_uart_stop_tx,
1595 .start_tx = pch_uart_start_tx,
1596 .stop_rx = pch_uart_stop_rx,
1597 .enable_ms = pch_uart_enable_ms,
1598 .break_ctl = pch_uart_break_ctl,
1599 .startup = pch_uart_startup,
1600 .shutdown = pch_uart_shutdown,
1601 .set_termios = pch_uart_set_termios,
1602/* .pm = pch_uart_pm, Not supported yet */
1603 .type = pch_uart_type,
1604 .release_port = pch_uart_release_port,
1605 .request_port = pch_uart_request_port,
1606 .config_port = pch_uart_config_port,
1607 .verify_port = pch_uart_verify_port,
1608#ifdef CONFIG_CONSOLE_POLL
1609 .poll_get_char = pch_uart_get_poll_char,
1610 .poll_put_char = pch_uart_put_poll_char,
1611#endif
1612};
1613
1614#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
1615
1616static void pch_console_putchar(struct uart_port *port, int ch)
1617{
1618 struct eg20t_port *priv =
1619 container_of(port, struct eg20t_port, port);
1620
1621 wait_for_xmitr(priv, UART_LSR_THRE);
1622 iowrite8(ch, priv->membase + PCH_UART_THR);
1623}
1624
1625/*
1626 * Print a string to the serial port trying not to disturb
1627 * any possible real use of the port...
1628 *
1629 * The console_lock must be held when we get here.
1630 */
1631static void
1632pch_console_write(struct console *co, const char *s, unsigned int count)
1633{
1634 struct eg20t_port *priv;
1635 unsigned long flags;
1636 int priv_locked = 1;
1637 int port_locked = 1;
1638 u8 ier;
1639
1640 priv = pch_uart_ports[co->index];
1641
1642 touch_nmi_watchdog();
1643
1644 local_irq_save(flags);
1645 if (priv->port.sysrq) {
1646 /* call to uart_handle_sysrq_char already took the priv lock */
1647 priv_locked = 0;
1648 /* serial8250_handle_port() already took the port lock */
1649 port_locked = 0;
1650 } else if (oops_in_progress) {
1651 priv_locked = spin_trylock(&priv->lock);
1652 port_locked = spin_trylock(&priv->port.lock);
1653 } else {
1654 spin_lock(&priv->lock);
1655 spin_lock(&priv->port.lock);
1656 }
1657
1658 /*
1659 * First save the IER then disable the interrupts
1660 */
1661 ier = ioread8(priv->membase + UART_IER);
1662
1663 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
1664
1665 uart_console_write(&priv->port, s, count, pch_console_putchar);
1666
1667 /*
1668 * Finally, wait for transmitter to become empty
1669 * and restore the IER
1670 */
1671 wait_for_xmitr(priv, BOTH_EMPTY);
1672 iowrite8(ier, priv->membase + UART_IER);
1673
1674 if (port_locked)
1675 spin_unlock(&priv->port.lock);
1676 if (priv_locked)
1677 spin_unlock(&priv->lock);
1678 local_irq_restore(flags);
1679}
1680
1681static int __init pch_console_setup(struct console *co, char *options)
1682{
1683 struct uart_port *port;
1684 int baud = default_baud;
1685 int bits = 8;
1686 int parity = 'n';
1687 int flow = 'n';
1688
1689 /*
1690 * Check whether an invalid uart number has been specified, and
1691 * if so, search for the first available port that does have
1692 * console support.
1693 */
1694 if (co->index >= PCH_UART_NR)
1695 co->index = 0;
1696 port = &pch_uart_ports[co->index]->port;
1697
1698 if (!port || (!port->iobase && !port->membase))
1699 return -ENODEV;
1700
1701 port->uartclk = pch_uart_get_uartclk();
1702
1703 if (options)
1704 uart_parse_options(options, &baud, &parity, &bits, &flow);
1705
1706 return uart_set_options(port, co, baud, parity, bits, flow);
1707}
1708
1709static struct uart_driver pch_uart_driver;
1710
1711static struct console pch_console = {
1712 .name = PCH_UART_DRIVER_DEVICE,
1713 .write = pch_console_write,
1714 .device = uart_console_device,
1715 .setup = pch_console_setup,
1716 .flags = CON_PRINTBUFFER | CON_ANYTIME,
1717 .index = -1,
1718 .data = &pch_uart_driver,
1719};
1720
1721#define PCH_CONSOLE (&pch_console)
1722#else
1723#define PCH_CONSOLE NULL
1724#endif /* CONFIG_SERIAL_PCH_UART_CONSOLE */
1725
1726static struct uart_driver pch_uart_driver = {
1727 .owner = THIS_MODULE,
1728 .driver_name = KBUILD_MODNAME,
1729 .dev_name = PCH_UART_DRIVER_DEVICE,
1730 .major = 0,
1731 .minor = 0,
1732 .nr = PCH_UART_NR,
1733 .cons = PCH_CONSOLE,
1734};
1735
1736static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
1737 const struct pci_device_id *id)
1738{
1739 struct eg20t_port *priv;
1740 int ret;
1741 unsigned int iobase;
1742 unsigned int mapbase;
1743 unsigned char *rxbuf;
1744 int fifosize;
1745 int port_type;
1746 struct pch_uart_driver_data *board;
1747#ifdef CONFIG_DEBUG_FS
1748 char name[32]; /* for debugfs file name */
1749#endif
1750
1751 board = &drv_dat[id->driver_data];
1752 port_type = board->port_type;
1753
1754 priv = kzalloc(sizeof(struct eg20t_port), GFP_KERNEL);
1755 if (priv == NULL)
1756 goto init_port_alloc_err;
1757
1758 rxbuf = (unsigned char *)__get_free_page(GFP_KERNEL);
1759 if (!rxbuf)
1760 goto init_port_free_txbuf;
1761
1762 switch (port_type) {
1763 case PORT_PCH_8LINE:
1764 fifosize = 256; /* EG20T/ML7213: UART0 */
1765 break;
1766 case PORT_PCH_2LINE:
1767 fifosize = 64; /* EG20T:UART1~3 ML7213: UART1~2*/
1768 break;
1769 default:
1770 dev_err(&pdev->dev, "Invalid Port Type(=%d)\n", port_type);
1771 goto init_port_hal_free;
1772 }
1773
1774 pci_enable_msi(pdev);
1775 pci_set_master(pdev);
1776
1777 spin_lock_init(&priv->lock);
1778
1779 iobase = pci_resource_start(pdev, 0);
1780 mapbase = pci_resource_start(pdev, 1);
1781 priv->mapbase = mapbase;
1782 priv->iobase = iobase;
1783 priv->pdev = pdev;
1784 priv->tx_empty = 1;
1785 priv->rxbuf.buf = rxbuf;
1786 priv->rxbuf.size = PAGE_SIZE;
1787
1788 priv->fifo_size = fifosize;
1789 priv->uartclk = pch_uart_get_uartclk();
1790 priv->port_type = port_type;
1791 priv->port.dev = &pdev->dev;
1792 priv->port.iobase = iobase;
1793 priv->port.membase = NULL;
1794 priv->port.mapbase = mapbase;
1795 priv->port.irq = pdev->irq;
1796 priv->port.iotype = UPIO_PORT;
1797 priv->port.ops = &pch_uart_ops;
1798 priv->port.flags = UPF_BOOT_AUTOCONF;
1799 priv->port.fifosize = fifosize;
1800 priv->port.line = board->line_no;
1801 priv->trigger = PCH_UART_HAL_TRIGGER_M;
1802
1803 snprintf(priv->irq_name, IRQ_NAME_SIZE,
1804 KBUILD_MODNAME ":" PCH_UART_DRIVER_DEVICE "%d",
1805 priv->port.line);
1806
1807 spin_lock_init(&priv->port.lock);
1808
1809 pci_set_drvdata(pdev, priv);
1810 priv->trigger_level = 1;
1811 priv->fcr = 0;
1812
1813 if (pdev->dev.of_node)
1814 of_property_read_u32(pdev->dev.of_node, "clock-frequency"
1815 , &user_uartclk);
1816
1817#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
1818 pch_uart_ports[board->line_no] = priv;
1819#endif
1820 ret = uart_add_one_port(&pch_uart_driver, &priv->port);
1821 if (ret < 0)
1822 goto init_port_hal_free;
1823
1824#ifdef CONFIG_DEBUG_FS
1825 snprintf(name, sizeof(name), "uart%d_regs", board->line_no);
1826 priv->debugfs = debugfs_create_file(name, S_IFREG | S_IRUGO,
1827 NULL, priv, &port_regs_ops);
1828#endif
1829
1830 return priv;
1831
1832init_port_hal_free:
1833#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
1834 pch_uart_ports[board->line_no] = NULL;
1835#endif
1836 free_page((unsigned long)rxbuf);
1837init_port_free_txbuf:
1838 kfree(priv);
1839init_port_alloc_err:
1840
1841 return NULL;
1842}
1843
1844static void pch_uart_exit_port(struct eg20t_port *priv)
1845{
1846
1847#ifdef CONFIG_DEBUG_FS
1848 debugfs_remove(priv->debugfs);
1849#endif
1850 uart_remove_one_port(&pch_uart_driver, &priv->port);
1851 free_page((unsigned long)priv->rxbuf.buf);
1852}
1853
1854static void pch_uart_pci_remove(struct pci_dev *pdev)
1855{
1856 struct eg20t_port *priv = pci_get_drvdata(pdev);
1857
1858 pci_disable_msi(pdev);
1859
1860#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
1861 pch_uart_ports[priv->port.line] = NULL;
1862#endif
1863 pch_uart_exit_port(priv);
1864 pci_disable_device(pdev);
1865 kfree(priv);
1866 return;
1867}
1868#ifdef CONFIG_PM
1869static int pch_uart_pci_suspend(struct pci_dev *pdev, pm_message_t state)
1870{
1871 struct eg20t_port *priv = pci_get_drvdata(pdev);
1872
1873 uart_suspend_port(&pch_uart_driver, &priv->port);
1874
1875 pci_save_state(pdev);
1876 pci_set_power_state(pdev, pci_choose_state(pdev, state));
1877 return 0;
1878}
1879
1880static int pch_uart_pci_resume(struct pci_dev *pdev)
1881{
1882 struct eg20t_port *priv = pci_get_drvdata(pdev);
1883 int ret;
1884
1885 pci_set_power_state(pdev, PCI_D0);
1886 pci_restore_state(pdev);
1887
1888 ret = pci_enable_device(pdev);
1889 if (ret) {
1890 dev_err(&pdev->dev,
1891 "%s-pci_enable_device failed(ret=%d) ", __func__, ret);
1892 return ret;
1893 }
1894
1895 uart_resume_port(&pch_uart_driver, &priv->port);
1896
1897 return 0;
1898}
1899#else
1900#define pch_uart_pci_suspend NULL
1901#define pch_uart_pci_resume NULL
1902#endif
1903
1904static const struct pci_device_id pch_uart_pci_id[] = {
1905 {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8811),
1906 .driver_data = pch_et20t_uart0},
1907 {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8812),
1908 .driver_data = pch_et20t_uart1},
1909 {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8813),
1910 .driver_data = pch_et20t_uart2},
1911 {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8814),
1912 .driver_data = pch_et20t_uart3},
1913 {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8027),
1914 .driver_data = pch_ml7213_uart0},
1915 {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8028),
1916 .driver_data = pch_ml7213_uart1},
1917 {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8029),
1918 .driver_data = pch_ml7213_uart2},
1919 {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x800C),
1920 .driver_data = pch_ml7223_uart0},
1921 {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x800D),
1922 .driver_data = pch_ml7223_uart1},
1923 {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8811),
1924 .driver_data = pch_ml7831_uart0},
1925 {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8812),
1926 .driver_data = pch_ml7831_uart1},
1927 {0,},
1928};
1929
1930static int pch_uart_pci_probe(struct pci_dev *pdev,
1931 const struct pci_device_id *id)
1932{
1933 int ret;
1934 struct eg20t_port *priv;
1935
1936 ret = pci_enable_device(pdev);
1937 if (ret < 0)
1938 goto probe_error;
1939
1940 priv = pch_uart_init_port(pdev, id);
1941 if (!priv) {
1942 ret = -EBUSY;
1943 goto probe_disable_device;
1944 }
1945 pci_set_drvdata(pdev, priv);
1946
1947 return ret;
1948
1949probe_disable_device:
1950 pci_disable_msi(pdev);
1951 pci_disable_device(pdev);
1952probe_error:
1953 return ret;
1954}
1955
1956static struct pci_driver pch_uart_pci_driver = {
1957 .name = "pch_uart",
1958 .id_table = pch_uart_pci_id,
1959 .probe = pch_uart_pci_probe,
1960 .remove = pch_uart_pci_remove,
1961 .suspend = pch_uart_pci_suspend,
1962 .resume = pch_uart_pci_resume,
1963};
1964
1965static int __init pch_uart_module_init(void)
1966{
1967 int ret;
1968
1969 /* register as UART driver */
1970 ret = uart_register_driver(&pch_uart_driver);
1971 if (ret < 0)
1972 return ret;
1973
1974 /* register as PCI driver */
1975 ret = pci_register_driver(&pch_uart_pci_driver);
1976 if (ret < 0)
1977 uart_unregister_driver(&pch_uart_driver);
1978
1979 return ret;
1980}
1981module_init(pch_uart_module_init);
1982
1983static void __exit pch_uart_module_exit(void)
1984{
1985 pci_unregister_driver(&pch_uart_pci_driver);
1986 uart_unregister_driver(&pch_uart_driver);
1987}
1988module_exit(pch_uart_module_exit);
1989
1990MODULE_LICENSE("GPL v2");
1991MODULE_DESCRIPTION("Intel EG20T PCH UART PCI Driver");
1992MODULE_DEVICE_TABLE(pci, pch_uart_pci_id);
1993
1994module_param(default_baud, uint, S_IRUGO);
1995MODULE_PARM_DESC(default_baud,
1996 "Default BAUD for initial driver state and console (default 9600)");
1997module_param(user_uartclk, uint, S_IRUGO);
1998MODULE_PARM_DESC(user_uartclk,
1999 "Override UART default or board specific UART clock");