Loading...
1/*****************************************************************************/
2/*
3 * moxa.c -- MOXA Intellio family multiport serial driver.
4 *
5 * Copyright (C) 1999-2000 Moxa Technologies (support@moxa.com).
6 * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
7 *
8 * This code is loosely based on the Linux serial driver, written by
9 * Linus Torvalds, Theodore T'so and others.
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
15 */
16
17/*
18 * MOXA Intellio Series Driver
19 * for : LINUX
20 * date : 1999/1/7
21 * version : 5.1
22 */
23
24#include <linux/module.h>
25#include <linux/types.h>
26#include <linux/mm.h>
27#include <linux/ioport.h>
28#include <linux/errno.h>
29#include <linux/firmware.h>
30#include <linux/signal.h>
31#include <linux/sched.h>
32#include <linux/timer.h>
33#include <linux/interrupt.h>
34#include <linux/tty.h>
35#include <linux/tty_flip.h>
36#include <linux/major.h>
37#include <linux/string.h>
38#include <linux/fcntl.h>
39#include <linux/ptrace.h>
40#include <linux/serial.h>
41#include <linux/tty_driver.h>
42#include <linux/delay.h>
43#include <linux/pci.h>
44#include <linux/init.h>
45#include <linux/bitops.h>
46#include <linux/slab.h>
47#include <linux/ratelimit.h>
48
49#include <asm/system.h>
50#include <asm/io.h>
51#include <asm/uaccess.h>
52
53#include "moxa.h"
54
55#define MOXA_VERSION "6.0k"
56
57#define MOXA_FW_HDRLEN 32
58
59#define MOXAMAJOR 172
60
61#define MAX_BOARDS 4 /* Don't change this value */
62#define MAX_PORTS_PER_BOARD 32 /* Don't change this value */
63#define MAX_PORTS (MAX_BOARDS * MAX_PORTS_PER_BOARD)
64
65#define MOXA_IS_320(brd) ((brd)->boardType == MOXA_BOARD_C320_ISA || \
66 (brd)->boardType == MOXA_BOARD_C320_PCI)
67
68/*
69 * Define the Moxa PCI vendor and device IDs.
70 */
71#define MOXA_BUS_TYPE_ISA 0
72#define MOXA_BUS_TYPE_PCI 1
73
74enum {
75 MOXA_BOARD_C218_PCI = 1,
76 MOXA_BOARD_C218_ISA,
77 MOXA_BOARD_C320_PCI,
78 MOXA_BOARD_C320_ISA,
79 MOXA_BOARD_CP204J,
80};
81
82static char *moxa_brdname[] =
83{
84 "C218 Turbo PCI series",
85 "C218 Turbo ISA series",
86 "C320 Turbo PCI series",
87 "C320 Turbo ISA series",
88 "CP-204J series",
89};
90
91#ifdef CONFIG_PCI
92static struct pci_device_id moxa_pcibrds[] = {
93 { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C218),
94 .driver_data = MOXA_BOARD_C218_PCI },
95 { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C320),
96 .driver_data = MOXA_BOARD_C320_PCI },
97 { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP204J),
98 .driver_data = MOXA_BOARD_CP204J },
99 { 0 }
100};
101MODULE_DEVICE_TABLE(pci, moxa_pcibrds);
102#endif /* CONFIG_PCI */
103
104struct moxa_port;
105
106static struct moxa_board_conf {
107 int boardType;
108 int numPorts;
109 int busType;
110
111 unsigned int ready;
112
113 struct moxa_port *ports;
114
115 void __iomem *basemem;
116 void __iomem *intNdx;
117 void __iomem *intPend;
118 void __iomem *intTable;
119} moxa_boards[MAX_BOARDS];
120
121struct mxser_mstatus {
122 tcflag_t cflag;
123 int cts;
124 int dsr;
125 int ri;
126 int dcd;
127};
128
129struct moxaq_str {
130 int inq;
131 int outq;
132};
133
134struct moxa_port {
135 struct tty_port port;
136 struct moxa_board_conf *board;
137 void __iomem *tableAddr;
138
139 int type;
140 int cflag;
141 unsigned long statusflags;
142
143 u8 DCDState; /* Protected by the port lock */
144 u8 lineCtrl;
145 u8 lowChkFlag;
146};
147
148struct mon_str {
149 int tick;
150 int rxcnt[MAX_PORTS];
151 int txcnt[MAX_PORTS];
152};
153
154/* statusflags */
155#define TXSTOPPED 1
156#define LOWWAIT 2
157#define EMPTYWAIT 3
158
159#define SERIAL_DO_RESTART
160
161#define WAKEUP_CHARS 256
162
163static int ttymajor = MOXAMAJOR;
164static struct mon_str moxaLog;
165static unsigned int moxaFuncTout = HZ / 2;
166static unsigned int moxaLowWaterChk;
167static DEFINE_MUTEX(moxa_openlock);
168static DEFINE_SPINLOCK(moxa_lock);
169
170static unsigned long baseaddr[MAX_BOARDS];
171static unsigned int type[MAX_BOARDS];
172static unsigned int numports[MAX_BOARDS];
173
174MODULE_AUTHOR("William Chen");
175MODULE_DESCRIPTION("MOXA Intellio Family Multiport Board Device Driver");
176MODULE_LICENSE("GPL");
177MODULE_FIRMWARE("c218tunx.cod");
178MODULE_FIRMWARE("cp204unx.cod");
179MODULE_FIRMWARE("c320tunx.cod");
180
181module_param_array(type, uint, NULL, 0);
182MODULE_PARM_DESC(type, "card type: C218=2, C320=4");
183module_param_array(baseaddr, ulong, NULL, 0);
184MODULE_PARM_DESC(baseaddr, "base address");
185module_param_array(numports, uint, NULL, 0);
186MODULE_PARM_DESC(numports, "numports (ignored for C218)");
187
188module_param(ttymajor, int, 0);
189
190/*
191 * static functions:
192 */
193static int moxa_open(struct tty_struct *, struct file *);
194static void moxa_close(struct tty_struct *, struct file *);
195static int moxa_write(struct tty_struct *, const unsigned char *, int);
196static int moxa_write_room(struct tty_struct *);
197static void moxa_flush_buffer(struct tty_struct *);
198static int moxa_chars_in_buffer(struct tty_struct *);
199static void moxa_set_termios(struct tty_struct *, struct ktermios *);
200static void moxa_stop(struct tty_struct *);
201static void moxa_start(struct tty_struct *);
202static void moxa_hangup(struct tty_struct *);
203static int moxa_tiocmget(struct tty_struct *tty);
204static int moxa_tiocmset(struct tty_struct *tty,
205 unsigned int set, unsigned int clear);
206static void moxa_poll(unsigned long);
207static void moxa_set_tty_param(struct tty_struct *, struct ktermios *);
208static void moxa_shutdown(struct tty_port *);
209static int moxa_carrier_raised(struct tty_port *);
210static void moxa_dtr_rts(struct tty_port *, int);
211/*
212 * moxa board interface functions:
213 */
214static void MoxaPortEnable(struct moxa_port *);
215static void MoxaPortDisable(struct moxa_port *);
216static int MoxaPortSetTermio(struct moxa_port *, struct ktermios *, speed_t);
217static int MoxaPortGetLineOut(struct moxa_port *, int *, int *);
218static void MoxaPortLineCtrl(struct moxa_port *, int, int);
219static void MoxaPortFlowCtrl(struct moxa_port *, int, int, int, int, int);
220static int MoxaPortLineStatus(struct moxa_port *);
221static void MoxaPortFlushData(struct moxa_port *, int);
222static int MoxaPortWriteData(struct tty_struct *, const unsigned char *, int);
223static int MoxaPortReadData(struct moxa_port *);
224static int MoxaPortTxQueue(struct moxa_port *);
225static int MoxaPortRxQueue(struct moxa_port *);
226static int MoxaPortTxFree(struct moxa_port *);
227static void MoxaPortTxDisable(struct moxa_port *);
228static void MoxaPortTxEnable(struct moxa_port *);
229static int moxa_get_serial_info(struct moxa_port *, struct serial_struct __user *);
230static int moxa_set_serial_info(struct moxa_port *, struct serial_struct __user *);
231static void MoxaSetFifo(struct moxa_port *port, int enable);
232
233/*
234 * I/O functions
235 */
236
237static DEFINE_SPINLOCK(moxafunc_lock);
238
239static void moxa_wait_finish(void __iomem *ofsAddr)
240{
241 unsigned long end = jiffies + moxaFuncTout;
242
243 while (readw(ofsAddr + FuncCode) != 0)
244 if (time_after(jiffies, end))
245 return;
246 if (readw(ofsAddr + FuncCode) != 0)
247 printk_ratelimited(KERN_WARNING "moxa function expired\n");
248}
249
250static void moxafunc(void __iomem *ofsAddr, u16 cmd, u16 arg)
251{
252 unsigned long flags;
253 spin_lock_irqsave(&moxafunc_lock, flags);
254 writew(arg, ofsAddr + FuncArg);
255 writew(cmd, ofsAddr + FuncCode);
256 moxa_wait_finish(ofsAddr);
257 spin_unlock_irqrestore(&moxafunc_lock, flags);
258}
259
260static int moxafuncret(void __iomem *ofsAddr, u16 cmd, u16 arg)
261{
262 unsigned long flags;
263 u16 ret;
264 spin_lock_irqsave(&moxafunc_lock, flags);
265 writew(arg, ofsAddr + FuncArg);
266 writew(cmd, ofsAddr + FuncCode);
267 moxa_wait_finish(ofsAddr);
268 ret = readw(ofsAddr + FuncArg);
269 spin_unlock_irqrestore(&moxafunc_lock, flags);
270 return ret;
271}
272
273static void moxa_low_water_check(void __iomem *ofsAddr)
274{
275 u16 rptr, wptr, mask, len;
276
277 if (readb(ofsAddr + FlagStat) & Xoff_state) {
278 rptr = readw(ofsAddr + RXrptr);
279 wptr = readw(ofsAddr + RXwptr);
280 mask = readw(ofsAddr + RX_mask);
281 len = (wptr - rptr) & mask;
282 if (len <= Low_water)
283 moxafunc(ofsAddr, FC_SendXon, 0);
284 }
285}
286
287/*
288 * TTY operations
289 */
290
291static int moxa_ioctl(struct tty_struct *tty,
292 unsigned int cmd, unsigned long arg)
293{
294 struct moxa_port *ch = tty->driver_data;
295 void __user *argp = (void __user *)arg;
296 int status, ret = 0;
297
298 if (tty->index == MAX_PORTS) {
299 if (cmd != MOXA_GETDATACOUNT && cmd != MOXA_GET_IOQUEUE &&
300 cmd != MOXA_GETMSTATUS)
301 return -EINVAL;
302 } else if (!ch)
303 return -ENODEV;
304
305 switch (cmd) {
306 case MOXA_GETDATACOUNT:
307 moxaLog.tick = jiffies;
308 if (copy_to_user(argp, &moxaLog, sizeof(moxaLog)))
309 ret = -EFAULT;
310 break;
311 case MOXA_FLUSH_QUEUE:
312 MoxaPortFlushData(ch, arg);
313 break;
314 case MOXA_GET_IOQUEUE: {
315 struct moxaq_str __user *argm = argp;
316 struct moxaq_str tmp;
317 struct moxa_port *p;
318 unsigned int i, j;
319
320 for (i = 0; i < MAX_BOARDS; i++) {
321 p = moxa_boards[i].ports;
322 for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) {
323 memset(&tmp, 0, sizeof(tmp));
324 spin_lock_bh(&moxa_lock);
325 if (moxa_boards[i].ready) {
326 tmp.inq = MoxaPortRxQueue(p);
327 tmp.outq = MoxaPortTxQueue(p);
328 }
329 spin_unlock_bh(&moxa_lock);
330 if (copy_to_user(argm, &tmp, sizeof(tmp)))
331 return -EFAULT;
332 }
333 }
334 break;
335 } case MOXA_GET_OQUEUE:
336 status = MoxaPortTxQueue(ch);
337 ret = put_user(status, (unsigned long __user *)argp);
338 break;
339 case MOXA_GET_IQUEUE:
340 status = MoxaPortRxQueue(ch);
341 ret = put_user(status, (unsigned long __user *)argp);
342 break;
343 case MOXA_GETMSTATUS: {
344 struct mxser_mstatus __user *argm = argp;
345 struct mxser_mstatus tmp;
346 struct moxa_port *p;
347 unsigned int i, j;
348
349 for (i = 0; i < MAX_BOARDS; i++) {
350 p = moxa_boards[i].ports;
351 for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) {
352 struct tty_struct *ttyp;
353 memset(&tmp, 0, sizeof(tmp));
354 spin_lock_bh(&moxa_lock);
355 if (!moxa_boards[i].ready) {
356 spin_unlock_bh(&moxa_lock);
357 goto copy;
358 }
359
360 status = MoxaPortLineStatus(p);
361 spin_unlock_bh(&moxa_lock);
362
363 if (status & 1)
364 tmp.cts = 1;
365 if (status & 2)
366 tmp.dsr = 1;
367 if (status & 4)
368 tmp.dcd = 1;
369
370 ttyp = tty_port_tty_get(&p->port);
371 if (!ttyp || !ttyp->termios)
372 tmp.cflag = p->cflag;
373 else
374 tmp.cflag = ttyp->termios->c_cflag;
375 tty_kref_put(ttyp);
376copy:
377 if (copy_to_user(argm, &tmp, sizeof(tmp)))
378 return -EFAULT;
379 }
380 }
381 break;
382 }
383 case TIOCGSERIAL:
384 mutex_lock(&ch->port.mutex);
385 ret = moxa_get_serial_info(ch, argp);
386 mutex_unlock(&ch->port.mutex);
387 break;
388 case TIOCSSERIAL:
389 mutex_lock(&ch->port.mutex);
390 ret = moxa_set_serial_info(ch, argp);
391 mutex_unlock(&ch->port.mutex);
392 break;
393 default:
394 ret = -ENOIOCTLCMD;
395 }
396 return ret;
397}
398
399static int moxa_break_ctl(struct tty_struct *tty, int state)
400{
401 struct moxa_port *port = tty->driver_data;
402
403 moxafunc(port->tableAddr, state ? FC_SendBreak : FC_StopBreak,
404 Magic_code);
405 return 0;
406}
407
408static const struct tty_operations moxa_ops = {
409 .open = moxa_open,
410 .close = moxa_close,
411 .write = moxa_write,
412 .write_room = moxa_write_room,
413 .flush_buffer = moxa_flush_buffer,
414 .chars_in_buffer = moxa_chars_in_buffer,
415 .ioctl = moxa_ioctl,
416 .set_termios = moxa_set_termios,
417 .stop = moxa_stop,
418 .start = moxa_start,
419 .hangup = moxa_hangup,
420 .break_ctl = moxa_break_ctl,
421 .tiocmget = moxa_tiocmget,
422 .tiocmset = moxa_tiocmset,
423};
424
425static const struct tty_port_operations moxa_port_ops = {
426 .carrier_raised = moxa_carrier_raised,
427 .dtr_rts = moxa_dtr_rts,
428 .shutdown = moxa_shutdown,
429};
430
431static struct tty_driver *moxaDriver;
432static DEFINE_TIMER(moxaTimer, moxa_poll, 0, 0);
433
434/*
435 * HW init
436 */
437
438static int moxa_check_fw_model(struct moxa_board_conf *brd, u8 model)
439{
440 switch (brd->boardType) {
441 case MOXA_BOARD_C218_ISA:
442 case MOXA_BOARD_C218_PCI:
443 if (model != 1)
444 goto err;
445 break;
446 case MOXA_BOARD_CP204J:
447 if (model != 3)
448 goto err;
449 break;
450 default:
451 if (model != 2)
452 goto err;
453 break;
454 }
455 return 0;
456err:
457 return -EINVAL;
458}
459
460static int moxa_check_fw(const void *ptr)
461{
462 const __le16 *lptr = ptr;
463
464 if (*lptr != cpu_to_le16(0x7980))
465 return -EINVAL;
466
467 return 0;
468}
469
470static int moxa_load_bios(struct moxa_board_conf *brd, const u8 *buf,
471 size_t len)
472{
473 void __iomem *baseAddr = brd->basemem;
474 u16 tmp;
475
476 writeb(HW_reset, baseAddr + Control_reg); /* reset */
477 msleep(10);
478 memset_io(baseAddr, 0, 4096);
479 memcpy_toio(baseAddr, buf, len); /* download BIOS */
480 writeb(0, baseAddr + Control_reg); /* restart */
481
482 msleep(2000);
483
484 switch (brd->boardType) {
485 case MOXA_BOARD_C218_ISA:
486 case MOXA_BOARD_C218_PCI:
487 tmp = readw(baseAddr + C218_key);
488 if (tmp != C218_KeyCode)
489 goto err;
490 break;
491 case MOXA_BOARD_CP204J:
492 tmp = readw(baseAddr + C218_key);
493 if (tmp != CP204J_KeyCode)
494 goto err;
495 break;
496 default:
497 tmp = readw(baseAddr + C320_key);
498 if (tmp != C320_KeyCode)
499 goto err;
500 tmp = readw(baseAddr + C320_status);
501 if (tmp != STS_init) {
502 printk(KERN_ERR "MOXA: bios upload failed -- CPU/Basic "
503 "module not found\n");
504 return -EIO;
505 }
506 break;
507 }
508
509 return 0;
510err:
511 printk(KERN_ERR "MOXA: bios upload failed -- board not found\n");
512 return -EIO;
513}
514
515static int moxa_load_320b(struct moxa_board_conf *brd, const u8 *ptr,
516 size_t len)
517{
518 void __iomem *baseAddr = brd->basemem;
519
520 if (len < 7168) {
521 printk(KERN_ERR "MOXA: invalid 320 bios -- too short\n");
522 return -EINVAL;
523 }
524
525 writew(len - 7168 - 2, baseAddr + C320bapi_len);
526 writeb(1, baseAddr + Control_reg); /* Select Page 1 */
527 memcpy_toio(baseAddr + DynPage_addr, ptr, 7168);
528 writeb(2, baseAddr + Control_reg); /* Select Page 2 */
529 memcpy_toio(baseAddr + DynPage_addr, ptr + 7168, len - 7168);
530
531 return 0;
532}
533
534static int moxa_real_load_code(struct moxa_board_conf *brd, const void *ptr,
535 size_t len)
536{
537 void __iomem *baseAddr = brd->basemem;
538 const __le16 *uptr = ptr;
539 size_t wlen, len2, j;
540 unsigned long key, loadbuf, loadlen, checksum, checksum_ok;
541 unsigned int i, retry;
542 u16 usum, keycode;
543
544 keycode = (brd->boardType == MOXA_BOARD_CP204J) ? CP204J_KeyCode :
545 C218_KeyCode;
546
547 switch (brd->boardType) {
548 case MOXA_BOARD_CP204J:
549 case MOXA_BOARD_C218_ISA:
550 case MOXA_BOARD_C218_PCI:
551 key = C218_key;
552 loadbuf = C218_LoadBuf;
553 loadlen = C218DLoad_len;
554 checksum = C218check_sum;
555 checksum_ok = C218chksum_ok;
556 break;
557 default:
558 key = C320_key;
559 keycode = C320_KeyCode;
560 loadbuf = C320_LoadBuf;
561 loadlen = C320DLoad_len;
562 checksum = C320check_sum;
563 checksum_ok = C320chksum_ok;
564 break;
565 }
566
567 usum = 0;
568 wlen = len >> 1;
569 for (i = 0; i < wlen; i++)
570 usum += le16_to_cpu(uptr[i]);
571 retry = 0;
572 do {
573 wlen = len >> 1;
574 j = 0;
575 while (wlen) {
576 len2 = (wlen > 2048) ? 2048 : wlen;
577 wlen -= len2;
578 memcpy_toio(baseAddr + loadbuf, ptr + j, len2 << 1);
579 j += len2 << 1;
580
581 writew(len2, baseAddr + loadlen);
582 writew(0, baseAddr + key);
583 for (i = 0; i < 100; i++) {
584 if (readw(baseAddr + key) == keycode)
585 break;
586 msleep(10);
587 }
588 if (readw(baseAddr + key) != keycode)
589 return -EIO;
590 }
591 writew(0, baseAddr + loadlen);
592 writew(usum, baseAddr + checksum);
593 writew(0, baseAddr + key);
594 for (i = 0; i < 100; i++) {
595 if (readw(baseAddr + key) == keycode)
596 break;
597 msleep(10);
598 }
599 retry++;
600 } while ((readb(baseAddr + checksum_ok) != 1) && (retry < 3));
601 if (readb(baseAddr + checksum_ok) != 1)
602 return -EIO;
603
604 writew(0, baseAddr + key);
605 for (i = 0; i < 600; i++) {
606 if (readw(baseAddr + Magic_no) == Magic_code)
607 break;
608 msleep(10);
609 }
610 if (readw(baseAddr + Magic_no) != Magic_code)
611 return -EIO;
612
613 if (MOXA_IS_320(brd)) {
614 if (brd->busType == MOXA_BUS_TYPE_PCI) { /* ASIC board */
615 writew(0x3800, baseAddr + TMS320_PORT1);
616 writew(0x3900, baseAddr + TMS320_PORT2);
617 writew(28499, baseAddr + TMS320_CLOCK);
618 } else {
619 writew(0x3200, baseAddr + TMS320_PORT1);
620 writew(0x3400, baseAddr + TMS320_PORT2);
621 writew(19999, baseAddr + TMS320_CLOCK);
622 }
623 }
624 writew(1, baseAddr + Disable_IRQ);
625 writew(0, baseAddr + Magic_no);
626 for (i = 0; i < 500; i++) {
627 if (readw(baseAddr + Magic_no) == Magic_code)
628 break;
629 msleep(10);
630 }
631 if (readw(baseAddr + Magic_no) != Magic_code)
632 return -EIO;
633
634 if (MOXA_IS_320(brd)) {
635 j = readw(baseAddr + Module_cnt);
636 if (j <= 0)
637 return -EIO;
638 brd->numPorts = j * 8;
639 writew(j, baseAddr + Module_no);
640 writew(0, baseAddr + Magic_no);
641 for (i = 0; i < 600; i++) {
642 if (readw(baseAddr + Magic_no) == Magic_code)
643 break;
644 msleep(10);
645 }
646 if (readw(baseAddr + Magic_no) != Magic_code)
647 return -EIO;
648 }
649 brd->intNdx = baseAddr + IRQindex;
650 brd->intPend = baseAddr + IRQpending;
651 brd->intTable = baseAddr + IRQtable;
652
653 return 0;
654}
655
656static int moxa_load_code(struct moxa_board_conf *brd, const void *ptr,
657 size_t len)
658{
659 void __iomem *ofsAddr, *baseAddr = brd->basemem;
660 struct moxa_port *port;
661 int retval, i;
662
663 if (len % 2) {
664 printk(KERN_ERR "MOXA: bios length is not even\n");
665 return -EINVAL;
666 }
667
668 retval = moxa_real_load_code(brd, ptr, len); /* may change numPorts */
669 if (retval)
670 return retval;
671
672 switch (brd->boardType) {
673 case MOXA_BOARD_C218_ISA:
674 case MOXA_BOARD_C218_PCI:
675 case MOXA_BOARD_CP204J:
676 port = brd->ports;
677 for (i = 0; i < brd->numPorts; i++, port++) {
678 port->board = brd;
679 port->DCDState = 0;
680 port->tableAddr = baseAddr + Extern_table +
681 Extern_size * i;
682 ofsAddr = port->tableAddr;
683 writew(C218rx_mask, ofsAddr + RX_mask);
684 writew(C218tx_mask, ofsAddr + TX_mask);
685 writew(C218rx_spage + i * C218buf_pageno, ofsAddr + Page_rxb);
686 writew(readw(ofsAddr + Page_rxb) + C218rx_pageno, ofsAddr + EndPage_rxb);
687
688 writew(C218tx_spage + i * C218buf_pageno, ofsAddr + Page_txb);
689 writew(readw(ofsAddr + Page_txb) + C218tx_pageno, ofsAddr + EndPage_txb);
690
691 }
692 break;
693 default:
694 port = brd->ports;
695 for (i = 0; i < brd->numPorts; i++, port++) {
696 port->board = brd;
697 port->DCDState = 0;
698 port->tableAddr = baseAddr + Extern_table +
699 Extern_size * i;
700 ofsAddr = port->tableAddr;
701 switch (brd->numPorts) {
702 case 8:
703 writew(C320p8rx_mask, ofsAddr + RX_mask);
704 writew(C320p8tx_mask, ofsAddr + TX_mask);
705 writew(C320p8rx_spage + i * C320p8buf_pgno, ofsAddr + Page_rxb);
706 writew(readw(ofsAddr + Page_rxb) + C320p8rx_pgno, ofsAddr + EndPage_rxb);
707 writew(C320p8tx_spage + i * C320p8buf_pgno, ofsAddr + Page_txb);
708 writew(readw(ofsAddr + Page_txb) + C320p8tx_pgno, ofsAddr + EndPage_txb);
709
710 break;
711 case 16:
712 writew(C320p16rx_mask, ofsAddr + RX_mask);
713 writew(C320p16tx_mask, ofsAddr + TX_mask);
714 writew(C320p16rx_spage + i * C320p16buf_pgno, ofsAddr + Page_rxb);
715 writew(readw(ofsAddr + Page_rxb) + C320p16rx_pgno, ofsAddr + EndPage_rxb);
716 writew(C320p16tx_spage + i * C320p16buf_pgno, ofsAddr + Page_txb);
717 writew(readw(ofsAddr + Page_txb) + C320p16tx_pgno, ofsAddr + EndPage_txb);
718 break;
719
720 case 24:
721 writew(C320p24rx_mask, ofsAddr + RX_mask);
722 writew(C320p24tx_mask, ofsAddr + TX_mask);
723 writew(C320p24rx_spage + i * C320p24buf_pgno, ofsAddr + Page_rxb);
724 writew(readw(ofsAddr + Page_rxb) + C320p24rx_pgno, ofsAddr + EndPage_rxb);
725 writew(C320p24tx_spage + i * C320p24buf_pgno, ofsAddr + Page_txb);
726 writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb);
727 break;
728 case 32:
729 writew(C320p32rx_mask, ofsAddr + RX_mask);
730 writew(C320p32tx_mask, ofsAddr + TX_mask);
731 writew(C320p32tx_ofs, ofsAddr + Ofs_txb);
732 writew(C320p32rx_spage + i * C320p32buf_pgno, ofsAddr + Page_rxb);
733 writew(readb(ofsAddr + Page_rxb), ofsAddr + EndPage_rxb);
734 writew(C320p32tx_spage + i * C320p32buf_pgno, ofsAddr + Page_txb);
735 writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb);
736 break;
737 }
738 }
739 break;
740 }
741 return 0;
742}
743
744static int moxa_load_fw(struct moxa_board_conf *brd, const struct firmware *fw)
745{
746 const void *ptr = fw->data;
747 char rsn[64];
748 u16 lens[5];
749 size_t len;
750 unsigned int a, lenp, lencnt;
751 int ret = -EINVAL;
752 struct {
753 __le32 magic; /* 0x34303430 */
754 u8 reserved1[2];
755 u8 type; /* UNIX = 3 */
756 u8 model; /* C218T=1, C320T=2, CP204=3 */
757 u8 reserved2[8];
758 __le16 len[5];
759 } const *hdr = ptr;
760
761 BUILD_BUG_ON(ARRAY_SIZE(hdr->len) != ARRAY_SIZE(lens));
762
763 if (fw->size < MOXA_FW_HDRLEN) {
764 strcpy(rsn, "too short (even header won't fit)");
765 goto err;
766 }
767 if (hdr->magic != cpu_to_le32(0x30343034)) {
768 sprintf(rsn, "bad magic: %.8x", le32_to_cpu(hdr->magic));
769 goto err;
770 }
771 if (hdr->type != 3) {
772 sprintf(rsn, "not for linux, type is %u", hdr->type);
773 goto err;
774 }
775 if (moxa_check_fw_model(brd, hdr->model)) {
776 sprintf(rsn, "not for this card, model is %u", hdr->model);
777 goto err;
778 }
779
780 len = MOXA_FW_HDRLEN;
781 lencnt = hdr->model == 2 ? 5 : 3;
782 for (a = 0; a < ARRAY_SIZE(lens); a++) {
783 lens[a] = le16_to_cpu(hdr->len[a]);
784 if (lens[a] && len + lens[a] <= fw->size &&
785 moxa_check_fw(&fw->data[len]))
786 printk(KERN_WARNING "MOXA firmware: unexpected input "
787 "at offset %u, but going on\n", (u32)len);
788 if (!lens[a] && a < lencnt) {
789 sprintf(rsn, "too few entries in fw file");
790 goto err;
791 }
792 len += lens[a];
793 }
794
795 if (len != fw->size) {
796 sprintf(rsn, "bad length: %u (should be %u)", (u32)fw->size,
797 (u32)len);
798 goto err;
799 }
800
801 ptr += MOXA_FW_HDRLEN;
802 lenp = 0; /* bios */
803
804 strcpy(rsn, "read above");
805
806 ret = moxa_load_bios(brd, ptr, lens[lenp]);
807 if (ret)
808 goto err;
809
810 /* we skip the tty section (lens[1]), since we don't need it */
811 ptr += lens[lenp] + lens[lenp + 1];
812 lenp += 2; /* comm */
813
814 if (hdr->model == 2) {
815 ret = moxa_load_320b(brd, ptr, lens[lenp]);
816 if (ret)
817 goto err;
818 /* skip another tty */
819 ptr += lens[lenp] + lens[lenp + 1];
820 lenp += 2;
821 }
822
823 ret = moxa_load_code(brd, ptr, lens[lenp]);
824 if (ret)
825 goto err;
826
827 return 0;
828err:
829 printk(KERN_ERR "firmware failed to load, reason: %s\n", rsn);
830 return ret;
831}
832
833static int moxa_init_board(struct moxa_board_conf *brd, struct device *dev)
834{
835 const struct firmware *fw;
836 const char *file;
837 struct moxa_port *p;
838 unsigned int i;
839 int ret;
840
841 brd->ports = kcalloc(MAX_PORTS_PER_BOARD, sizeof(*brd->ports),
842 GFP_KERNEL);
843 if (brd->ports == NULL) {
844 printk(KERN_ERR "cannot allocate memory for ports\n");
845 ret = -ENOMEM;
846 goto err;
847 }
848
849 for (i = 0, p = brd->ports; i < MAX_PORTS_PER_BOARD; i++, p++) {
850 tty_port_init(&p->port);
851 p->port.ops = &moxa_port_ops;
852 p->type = PORT_16550A;
853 p->cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
854 }
855
856 switch (brd->boardType) {
857 case MOXA_BOARD_C218_ISA:
858 case MOXA_BOARD_C218_PCI:
859 file = "c218tunx.cod";
860 break;
861 case MOXA_BOARD_CP204J:
862 file = "cp204unx.cod";
863 break;
864 default:
865 file = "c320tunx.cod";
866 break;
867 }
868
869 ret = request_firmware(&fw, file, dev);
870 if (ret) {
871 printk(KERN_ERR "MOXA: request_firmware failed. Make sure "
872 "you've placed '%s' file into your firmware "
873 "loader directory (e.g. /lib/firmware)\n",
874 file);
875 goto err_free;
876 }
877
878 ret = moxa_load_fw(brd, fw);
879
880 release_firmware(fw);
881
882 if (ret)
883 goto err_free;
884
885 spin_lock_bh(&moxa_lock);
886 brd->ready = 1;
887 if (!timer_pending(&moxaTimer))
888 mod_timer(&moxaTimer, jiffies + HZ / 50);
889 spin_unlock_bh(&moxa_lock);
890
891 return 0;
892err_free:
893 kfree(brd->ports);
894err:
895 return ret;
896}
897
898static void moxa_board_deinit(struct moxa_board_conf *brd)
899{
900 unsigned int a, opened;
901
902 mutex_lock(&moxa_openlock);
903 spin_lock_bh(&moxa_lock);
904 brd->ready = 0;
905 spin_unlock_bh(&moxa_lock);
906
907 /* pci hot-un-plug support */
908 for (a = 0; a < brd->numPorts; a++)
909 if (brd->ports[a].port.flags & ASYNC_INITIALIZED) {
910 struct tty_struct *tty = tty_port_tty_get(
911 &brd->ports[a].port);
912 if (tty) {
913 tty_hangup(tty);
914 tty_kref_put(tty);
915 }
916 }
917 while (1) {
918 opened = 0;
919 for (a = 0; a < brd->numPorts; a++)
920 if (brd->ports[a].port.flags & ASYNC_INITIALIZED)
921 opened++;
922 mutex_unlock(&moxa_openlock);
923 if (!opened)
924 break;
925 msleep(50);
926 mutex_lock(&moxa_openlock);
927 }
928
929 iounmap(brd->basemem);
930 brd->basemem = NULL;
931 kfree(brd->ports);
932}
933
934#ifdef CONFIG_PCI
935static int __devinit moxa_pci_probe(struct pci_dev *pdev,
936 const struct pci_device_id *ent)
937{
938 struct moxa_board_conf *board;
939 unsigned int i;
940 int board_type = ent->driver_data;
941 int retval;
942
943 retval = pci_enable_device(pdev);
944 if (retval) {
945 dev_err(&pdev->dev, "can't enable pci device\n");
946 goto err;
947 }
948
949 for (i = 0; i < MAX_BOARDS; i++)
950 if (moxa_boards[i].basemem == NULL)
951 break;
952
953 retval = -ENODEV;
954 if (i >= MAX_BOARDS) {
955 dev_warn(&pdev->dev, "more than %u MOXA Intellio family boards "
956 "found. Board is ignored.\n", MAX_BOARDS);
957 goto err;
958 }
959
960 board = &moxa_boards[i];
961
962 retval = pci_request_region(pdev, 2, "moxa-base");
963 if (retval) {
964 dev_err(&pdev->dev, "can't request pci region 2\n");
965 goto err;
966 }
967
968 board->basemem = ioremap_nocache(pci_resource_start(pdev, 2), 0x4000);
969 if (board->basemem == NULL) {
970 dev_err(&pdev->dev, "can't remap io space 2\n");
971 goto err_reg;
972 }
973
974 board->boardType = board_type;
975 switch (board_type) {
976 case MOXA_BOARD_C218_ISA:
977 case MOXA_BOARD_C218_PCI:
978 board->numPorts = 8;
979 break;
980
981 case MOXA_BOARD_CP204J:
982 board->numPorts = 4;
983 break;
984 default:
985 board->numPorts = 0;
986 break;
987 }
988 board->busType = MOXA_BUS_TYPE_PCI;
989
990 retval = moxa_init_board(board, &pdev->dev);
991 if (retval)
992 goto err_base;
993
994 pci_set_drvdata(pdev, board);
995
996 dev_info(&pdev->dev, "board '%s' ready (%u ports, firmware loaded)\n",
997 moxa_brdname[board_type - 1], board->numPorts);
998
999 return 0;
1000err_base:
1001 iounmap(board->basemem);
1002 board->basemem = NULL;
1003err_reg:
1004 pci_release_region(pdev, 2);
1005err:
1006 return retval;
1007}
1008
1009static void __devexit moxa_pci_remove(struct pci_dev *pdev)
1010{
1011 struct moxa_board_conf *brd = pci_get_drvdata(pdev);
1012
1013 moxa_board_deinit(brd);
1014
1015 pci_release_region(pdev, 2);
1016}
1017
1018static struct pci_driver moxa_pci_driver = {
1019 .name = "moxa",
1020 .id_table = moxa_pcibrds,
1021 .probe = moxa_pci_probe,
1022 .remove = __devexit_p(moxa_pci_remove)
1023};
1024#endif /* CONFIG_PCI */
1025
1026static int __init moxa_init(void)
1027{
1028 unsigned int isabrds = 0;
1029 int retval = 0;
1030 struct moxa_board_conf *brd = moxa_boards;
1031 unsigned int i;
1032
1033 printk(KERN_INFO "MOXA Intellio family driver version %s\n",
1034 MOXA_VERSION);
1035 moxaDriver = alloc_tty_driver(MAX_PORTS + 1);
1036 if (!moxaDriver)
1037 return -ENOMEM;
1038
1039 moxaDriver->owner = THIS_MODULE;
1040 moxaDriver->name = "ttyMX";
1041 moxaDriver->major = ttymajor;
1042 moxaDriver->minor_start = 0;
1043 moxaDriver->type = TTY_DRIVER_TYPE_SERIAL;
1044 moxaDriver->subtype = SERIAL_TYPE_NORMAL;
1045 moxaDriver->init_termios = tty_std_termios;
1046 moxaDriver->init_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
1047 moxaDriver->init_termios.c_ispeed = 9600;
1048 moxaDriver->init_termios.c_ospeed = 9600;
1049 moxaDriver->flags = TTY_DRIVER_REAL_RAW;
1050 tty_set_operations(moxaDriver, &moxa_ops);
1051
1052 if (tty_register_driver(moxaDriver)) {
1053 printk(KERN_ERR "can't register MOXA Smartio tty driver!\n");
1054 put_tty_driver(moxaDriver);
1055 return -1;
1056 }
1057
1058 /* Find the boards defined from module args. */
1059
1060 for (i = 0; i < MAX_BOARDS; i++) {
1061 if (!baseaddr[i])
1062 break;
1063 if (type[i] == MOXA_BOARD_C218_ISA ||
1064 type[i] == MOXA_BOARD_C320_ISA) {
1065 pr_debug("Moxa board %2d: %s board(baseAddr=%lx)\n",
1066 isabrds + 1, moxa_brdname[type[i] - 1],
1067 baseaddr[i]);
1068 brd->boardType = type[i];
1069 brd->numPorts = type[i] == MOXA_BOARD_C218_ISA ? 8 :
1070 numports[i];
1071 brd->busType = MOXA_BUS_TYPE_ISA;
1072 brd->basemem = ioremap_nocache(baseaddr[i], 0x4000);
1073 if (!brd->basemem) {
1074 printk(KERN_ERR "MOXA: can't remap %lx\n",
1075 baseaddr[i]);
1076 continue;
1077 }
1078 if (moxa_init_board(brd, NULL)) {
1079 iounmap(brd->basemem);
1080 brd->basemem = NULL;
1081 continue;
1082 }
1083
1084 printk(KERN_INFO "MOXA isa board found at 0x%.8lu and "
1085 "ready (%u ports, firmware loaded)\n",
1086 baseaddr[i], brd->numPorts);
1087
1088 brd++;
1089 isabrds++;
1090 }
1091 }
1092
1093#ifdef CONFIG_PCI
1094 retval = pci_register_driver(&moxa_pci_driver);
1095 if (retval) {
1096 printk(KERN_ERR "Can't register MOXA pci driver!\n");
1097 if (isabrds)
1098 retval = 0;
1099 }
1100#endif
1101
1102 return retval;
1103}
1104
1105static void __exit moxa_exit(void)
1106{
1107 unsigned int i;
1108
1109#ifdef CONFIG_PCI
1110 pci_unregister_driver(&moxa_pci_driver);
1111#endif
1112
1113 for (i = 0; i < MAX_BOARDS; i++) /* ISA boards */
1114 if (moxa_boards[i].ready)
1115 moxa_board_deinit(&moxa_boards[i]);
1116
1117 del_timer_sync(&moxaTimer);
1118
1119 if (tty_unregister_driver(moxaDriver))
1120 printk(KERN_ERR "Couldn't unregister MOXA Intellio family "
1121 "serial driver\n");
1122 put_tty_driver(moxaDriver);
1123}
1124
1125module_init(moxa_init);
1126module_exit(moxa_exit);
1127
1128static void moxa_shutdown(struct tty_port *port)
1129{
1130 struct moxa_port *ch = container_of(port, struct moxa_port, port);
1131 MoxaPortDisable(ch);
1132 MoxaPortFlushData(ch, 2);
1133}
1134
1135static int moxa_carrier_raised(struct tty_port *port)
1136{
1137 struct moxa_port *ch = container_of(port, struct moxa_port, port);
1138 int dcd;
1139
1140 spin_lock_irq(&port->lock);
1141 dcd = ch->DCDState;
1142 spin_unlock_irq(&port->lock);
1143 return dcd;
1144}
1145
1146static void moxa_dtr_rts(struct tty_port *port, int onoff)
1147{
1148 struct moxa_port *ch = container_of(port, struct moxa_port, port);
1149 MoxaPortLineCtrl(ch, onoff, onoff);
1150}
1151
1152
1153static int moxa_open(struct tty_struct *tty, struct file *filp)
1154{
1155 struct moxa_board_conf *brd;
1156 struct moxa_port *ch;
1157 int port;
1158
1159 port = tty->index;
1160 if (port == MAX_PORTS) {
1161 return capable(CAP_SYS_ADMIN) ? 0 : -EPERM;
1162 }
1163 if (mutex_lock_interruptible(&moxa_openlock))
1164 return -ERESTARTSYS;
1165 brd = &moxa_boards[port / MAX_PORTS_PER_BOARD];
1166 if (!brd->ready) {
1167 mutex_unlock(&moxa_openlock);
1168 return -ENODEV;
1169 }
1170
1171 if (port % MAX_PORTS_PER_BOARD >= brd->numPorts) {
1172 mutex_unlock(&moxa_openlock);
1173 return -ENODEV;
1174 }
1175
1176 ch = &brd->ports[port % MAX_PORTS_PER_BOARD];
1177 ch->port.count++;
1178 tty->driver_data = ch;
1179 tty_port_tty_set(&ch->port, tty);
1180 mutex_lock(&ch->port.mutex);
1181 if (!(ch->port.flags & ASYNC_INITIALIZED)) {
1182 ch->statusflags = 0;
1183 moxa_set_tty_param(tty, tty->termios);
1184 MoxaPortLineCtrl(ch, 1, 1);
1185 MoxaPortEnable(ch);
1186 MoxaSetFifo(ch, ch->type == PORT_16550A);
1187 ch->port.flags |= ASYNC_INITIALIZED;
1188 }
1189 mutex_unlock(&ch->port.mutex);
1190 mutex_unlock(&moxa_openlock);
1191
1192 return tty_port_block_til_ready(&ch->port, tty, filp);
1193}
1194
1195static void moxa_close(struct tty_struct *tty, struct file *filp)
1196{
1197 struct moxa_port *ch = tty->driver_data;
1198 ch->cflag = tty->termios->c_cflag;
1199 tty_port_close(&ch->port, tty, filp);
1200}
1201
1202static int moxa_write(struct tty_struct *tty,
1203 const unsigned char *buf, int count)
1204{
1205 struct moxa_port *ch = tty->driver_data;
1206 unsigned long flags;
1207 int len;
1208
1209 if (ch == NULL)
1210 return 0;
1211
1212 spin_lock_irqsave(&moxa_lock, flags);
1213 len = MoxaPortWriteData(tty, buf, count);
1214 spin_unlock_irqrestore(&moxa_lock, flags);
1215
1216 set_bit(LOWWAIT, &ch->statusflags);
1217 return len;
1218}
1219
1220static int moxa_write_room(struct tty_struct *tty)
1221{
1222 struct moxa_port *ch;
1223
1224 if (tty->stopped)
1225 return 0;
1226 ch = tty->driver_data;
1227 if (ch == NULL)
1228 return 0;
1229 return MoxaPortTxFree(ch);
1230}
1231
1232static void moxa_flush_buffer(struct tty_struct *tty)
1233{
1234 struct moxa_port *ch = tty->driver_data;
1235
1236 if (ch == NULL)
1237 return;
1238 MoxaPortFlushData(ch, 1);
1239 tty_wakeup(tty);
1240}
1241
1242static int moxa_chars_in_buffer(struct tty_struct *tty)
1243{
1244 struct moxa_port *ch = tty->driver_data;
1245 int chars;
1246
1247 chars = MoxaPortTxQueue(ch);
1248 if (chars)
1249 /*
1250 * Make it possible to wakeup anything waiting for output
1251 * in tty_ioctl.c, etc.
1252 */
1253 set_bit(EMPTYWAIT, &ch->statusflags);
1254 return chars;
1255}
1256
1257static int moxa_tiocmget(struct tty_struct *tty)
1258{
1259 struct moxa_port *ch = tty->driver_data;
1260 int flag = 0, dtr, rts;
1261
1262 MoxaPortGetLineOut(ch, &dtr, &rts);
1263 if (dtr)
1264 flag |= TIOCM_DTR;
1265 if (rts)
1266 flag |= TIOCM_RTS;
1267 dtr = MoxaPortLineStatus(ch);
1268 if (dtr & 1)
1269 flag |= TIOCM_CTS;
1270 if (dtr & 2)
1271 flag |= TIOCM_DSR;
1272 if (dtr & 4)
1273 flag |= TIOCM_CD;
1274 return flag;
1275}
1276
1277static int moxa_tiocmset(struct tty_struct *tty,
1278 unsigned int set, unsigned int clear)
1279{
1280 struct moxa_port *ch;
1281 int dtr, rts;
1282
1283 mutex_lock(&moxa_openlock);
1284 ch = tty->driver_data;
1285 if (!ch) {
1286 mutex_unlock(&moxa_openlock);
1287 return -EINVAL;
1288 }
1289
1290 MoxaPortGetLineOut(ch, &dtr, &rts);
1291 if (set & TIOCM_RTS)
1292 rts = 1;
1293 if (set & TIOCM_DTR)
1294 dtr = 1;
1295 if (clear & TIOCM_RTS)
1296 rts = 0;
1297 if (clear & TIOCM_DTR)
1298 dtr = 0;
1299 MoxaPortLineCtrl(ch, dtr, rts);
1300 mutex_unlock(&moxa_openlock);
1301 return 0;
1302}
1303
1304static void moxa_set_termios(struct tty_struct *tty,
1305 struct ktermios *old_termios)
1306{
1307 struct moxa_port *ch = tty->driver_data;
1308
1309 if (ch == NULL)
1310 return;
1311 moxa_set_tty_param(tty, old_termios);
1312 if (!(old_termios->c_cflag & CLOCAL) && C_CLOCAL(tty))
1313 wake_up_interruptible(&ch->port.open_wait);
1314}
1315
1316static void moxa_stop(struct tty_struct *tty)
1317{
1318 struct moxa_port *ch = tty->driver_data;
1319
1320 if (ch == NULL)
1321 return;
1322 MoxaPortTxDisable(ch);
1323 set_bit(TXSTOPPED, &ch->statusflags);
1324}
1325
1326
1327static void moxa_start(struct tty_struct *tty)
1328{
1329 struct moxa_port *ch = tty->driver_data;
1330
1331 if (ch == NULL)
1332 return;
1333
1334 if (!(ch->statusflags & TXSTOPPED))
1335 return;
1336
1337 MoxaPortTxEnable(ch);
1338 clear_bit(TXSTOPPED, &ch->statusflags);
1339}
1340
1341static void moxa_hangup(struct tty_struct *tty)
1342{
1343 struct moxa_port *ch = tty->driver_data;
1344 tty_port_hangup(&ch->port);
1345}
1346
1347static void moxa_new_dcdstate(struct moxa_port *p, u8 dcd)
1348{
1349 struct tty_struct *tty;
1350 unsigned long flags;
1351 dcd = !!dcd;
1352
1353 spin_lock_irqsave(&p->port.lock, flags);
1354 if (dcd != p->DCDState) {
1355 p->DCDState = dcd;
1356 spin_unlock_irqrestore(&p->port.lock, flags);
1357 tty = tty_port_tty_get(&p->port);
1358 if (tty && C_CLOCAL(tty) && !dcd)
1359 tty_hangup(tty);
1360 tty_kref_put(tty);
1361 }
1362 else
1363 spin_unlock_irqrestore(&p->port.lock, flags);
1364}
1365
1366static int moxa_poll_port(struct moxa_port *p, unsigned int handle,
1367 u16 __iomem *ip)
1368{
1369 struct tty_struct *tty = tty_port_tty_get(&p->port);
1370 void __iomem *ofsAddr;
1371 unsigned int inited = p->port.flags & ASYNC_INITIALIZED;
1372 u16 intr;
1373
1374 if (tty) {
1375 if (test_bit(EMPTYWAIT, &p->statusflags) &&
1376 MoxaPortTxQueue(p) == 0) {
1377 clear_bit(EMPTYWAIT, &p->statusflags);
1378 tty_wakeup(tty);
1379 }
1380 if (test_bit(LOWWAIT, &p->statusflags) && !tty->stopped &&
1381 MoxaPortTxQueue(p) <= WAKEUP_CHARS) {
1382 clear_bit(LOWWAIT, &p->statusflags);
1383 tty_wakeup(tty);
1384 }
1385
1386 if (inited && !test_bit(TTY_THROTTLED, &tty->flags) &&
1387 MoxaPortRxQueue(p) > 0) { /* RX */
1388 MoxaPortReadData(p);
1389 tty_schedule_flip(tty);
1390 }
1391 } else {
1392 clear_bit(EMPTYWAIT, &p->statusflags);
1393 MoxaPortFlushData(p, 0); /* flush RX */
1394 }
1395
1396 if (!handle) /* nothing else to do */
1397 goto put;
1398
1399 intr = readw(ip); /* port irq status */
1400 if (intr == 0)
1401 goto put;
1402
1403 writew(0, ip); /* ACK port */
1404 ofsAddr = p->tableAddr;
1405 if (intr & IntrTx) /* disable tx intr */
1406 writew(readw(ofsAddr + HostStat) & ~WakeupTx,
1407 ofsAddr + HostStat);
1408
1409 if (!inited)
1410 goto put;
1411
1412 if (tty && (intr & IntrBreak) && !I_IGNBRK(tty)) { /* BREAK */
1413 tty_insert_flip_char(tty, 0, TTY_BREAK);
1414 tty_schedule_flip(tty);
1415 }
1416
1417 if (intr & IntrLine)
1418 moxa_new_dcdstate(p, readb(ofsAddr + FlagStat) & DCD_state);
1419put:
1420 tty_kref_put(tty);
1421
1422 return 0;
1423}
1424
1425static void moxa_poll(unsigned long ignored)
1426{
1427 struct moxa_board_conf *brd;
1428 u16 __iomem *ip;
1429 unsigned int card, port, served = 0;
1430
1431 spin_lock(&moxa_lock);
1432 for (card = 0; card < MAX_BOARDS; card++) {
1433 brd = &moxa_boards[card];
1434 if (!brd->ready)
1435 continue;
1436
1437 served++;
1438
1439 ip = NULL;
1440 if (readb(brd->intPend) == 0xff)
1441 ip = brd->intTable + readb(brd->intNdx);
1442
1443 for (port = 0; port < brd->numPorts; port++)
1444 moxa_poll_port(&brd->ports[port], !!ip, ip + port);
1445
1446 if (ip)
1447 writeb(0, brd->intPend); /* ACK */
1448
1449 if (moxaLowWaterChk) {
1450 struct moxa_port *p = brd->ports;
1451 for (port = 0; port < brd->numPorts; port++, p++)
1452 if (p->lowChkFlag) {
1453 p->lowChkFlag = 0;
1454 moxa_low_water_check(p->tableAddr);
1455 }
1456 }
1457 }
1458 moxaLowWaterChk = 0;
1459
1460 if (served)
1461 mod_timer(&moxaTimer, jiffies + HZ / 50);
1462 spin_unlock(&moxa_lock);
1463}
1464
1465/******************************************************************************/
1466
1467static void moxa_set_tty_param(struct tty_struct *tty, struct ktermios *old_termios)
1468{
1469 register struct ktermios *ts = tty->termios;
1470 struct moxa_port *ch = tty->driver_data;
1471 int rts, cts, txflow, rxflow, xany, baud;
1472
1473 rts = cts = txflow = rxflow = xany = 0;
1474 if (ts->c_cflag & CRTSCTS)
1475 rts = cts = 1;
1476 if (ts->c_iflag & IXON)
1477 txflow = 1;
1478 if (ts->c_iflag & IXOFF)
1479 rxflow = 1;
1480 if (ts->c_iflag & IXANY)
1481 xany = 1;
1482
1483 /* Clear the features we don't support */
1484 ts->c_cflag &= ~CMSPAR;
1485 MoxaPortFlowCtrl(ch, rts, cts, txflow, rxflow, xany);
1486 baud = MoxaPortSetTermio(ch, ts, tty_get_baud_rate(tty));
1487 if (baud == -1)
1488 baud = tty_termios_baud_rate(old_termios);
1489 /* Not put the baud rate into the termios data */
1490 tty_encode_baud_rate(tty, baud, baud);
1491}
1492
1493/*****************************************************************************
1494 * Driver level functions: *
1495 *****************************************************************************/
1496
1497static void MoxaPortFlushData(struct moxa_port *port, int mode)
1498{
1499 void __iomem *ofsAddr;
1500 if (mode < 0 || mode > 2)
1501 return;
1502 ofsAddr = port->tableAddr;
1503 moxafunc(ofsAddr, FC_FlushQueue, mode);
1504 if (mode != 1) {
1505 port->lowChkFlag = 0;
1506 moxa_low_water_check(ofsAddr);
1507 }
1508}
1509
1510/*
1511 * Moxa Port Number Description:
1512 *
1513 * MOXA serial driver supports up to 4 MOXA-C218/C320 boards. And,
1514 * the port number using in MOXA driver functions will be 0 to 31 for
1515 * first MOXA board, 32 to 63 for second, 64 to 95 for third and 96
1516 * to 127 for fourth. For example, if you setup three MOXA boards,
1517 * first board is C218, second board is C320-16 and third board is
1518 * C320-32. The port number of first board (C218 - 8 ports) is from
1519 * 0 to 7. The port number of second board (C320 - 16 ports) is form
1520 * 32 to 47. The port number of third board (C320 - 32 ports) is from
1521 * 64 to 95. And those port numbers form 8 to 31, 48 to 63 and 96 to
1522 * 127 will be invalid.
1523 *
1524 *
1525 * Moxa Functions Description:
1526 *
1527 * Function 1: Driver initialization routine, this routine must be
1528 * called when initialized driver.
1529 * Syntax:
1530 * void MoxaDriverInit();
1531 *
1532 *
1533 * Function 2: Moxa driver private IOCTL command processing.
1534 * Syntax:
1535 * int MoxaDriverIoctl(unsigned int cmd, unsigned long arg, int port);
1536 *
1537 * unsigned int cmd : IOCTL command
1538 * unsigned long arg : IOCTL argument
1539 * int port : port number (0 - 127)
1540 *
1541 * return: 0 (OK)
1542 * -EINVAL
1543 * -ENOIOCTLCMD
1544 *
1545 *
1546 * Function 6: Enable this port to start Tx/Rx data.
1547 * Syntax:
1548 * void MoxaPortEnable(int port);
1549 * int port : port number (0 - 127)
1550 *
1551 *
1552 * Function 7: Disable this port
1553 * Syntax:
1554 * void MoxaPortDisable(int port);
1555 * int port : port number (0 - 127)
1556 *
1557 *
1558 * Function 10: Setting baud rate of this port.
1559 * Syntax:
1560 * speed_t MoxaPortSetBaud(int port, speed_t baud);
1561 * int port : port number (0 - 127)
1562 * long baud : baud rate (50 - 115200)
1563 *
1564 * return: 0 : this port is invalid or baud < 50
1565 * 50 - 115200 : the real baud rate set to the port, if
1566 * the argument baud is large than maximun
1567 * available baud rate, the real setting
1568 * baud rate will be the maximun baud rate.
1569 *
1570 *
1571 * Function 12: Configure the port.
1572 * Syntax:
1573 * int MoxaPortSetTermio(int port, struct ktermios *termio, speed_t baud);
1574 * int port : port number (0 - 127)
1575 * struct ktermios * termio : termio structure pointer
1576 * speed_t baud : baud rate
1577 *
1578 * return: -1 : this port is invalid or termio == NULL
1579 * 0 : setting O.K.
1580 *
1581 *
1582 * Function 13: Get the DTR/RTS state of this port.
1583 * Syntax:
1584 * int MoxaPortGetLineOut(int port, int *dtrState, int *rtsState);
1585 * int port : port number (0 - 127)
1586 * int * dtrState : pointer to INT to receive the current DTR
1587 * state. (if NULL, this function will not
1588 * write to this address)
1589 * int * rtsState : pointer to INT to receive the current RTS
1590 * state. (if NULL, this function will not
1591 * write to this address)
1592 *
1593 * return: -1 : this port is invalid
1594 * 0 : O.K.
1595 *
1596 *
1597 * Function 14: Setting the DTR/RTS output state of this port.
1598 * Syntax:
1599 * void MoxaPortLineCtrl(int port, int dtrState, int rtsState);
1600 * int port : port number (0 - 127)
1601 * int dtrState : DTR output state (0: off, 1: on)
1602 * int rtsState : RTS output state (0: off, 1: on)
1603 *
1604 *
1605 * Function 15: Setting the flow control of this port.
1606 * Syntax:
1607 * void MoxaPortFlowCtrl(int port, int rtsFlow, int ctsFlow, int rxFlow,
1608 * int txFlow,int xany);
1609 * int port : port number (0 - 127)
1610 * int rtsFlow : H/W RTS flow control (0: no, 1: yes)
1611 * int ctsFlow : H/W CTS flow control (0: no, 1: yes)
1612 * int rxFlow : S/W Rx XON/XOFF flow control (0: no, 1: yes)
1613 * int txFlow : S/W Tx XON/XOFF flow control (0: no, 1: yes)
1614 * int xany : S/W XANY flow control (0: no, 1: yes)
1615 *
1616 *
1617 * Function 16: Get ths line status of this port
1618 * Syntax:
1619 * int MoxaPortLineStatus(int port);
1620 * int port : port number (0 - 127)
1621 *
1622 * return: Bit 0 - CTS state (0: off, 1: on)
1623 * Bit 1 - DSR state (0: off, 1: on)
1624 * Bit 2 - DCD state (0: off, 1: on)
1625 *
1626 *
1627 * Function 19: Flush the Rx/Tx buffer data of this port.
1628 * Syntax:
1629 * void MoxaPortFlushData(int port, int mode);
1630 * int port : port number (0 - 127)
1631 * int mode
1632 * 0 : flush the Rx buffer
1633 * 1 : flush the Tx buffer
1634 * 2 : flush the Rx and Tx buffer
1635 *
1636 *
1637 * Function 20: Write data.
1638 * Syntax:
1639 * int MoxaPortWriteData(int port, unsigned char * buffer, int length);
1640 * int port : port number (0 - 127)
1641 * unsigned char * buffer : pointer to write data buffer.
1642 * int length : write data length
1643 *
1644 * return: 0 - length : real write data length
1645 *
1646 *
1647 * Function 21: Read data.
1648 * Syntax:
1649 * int MoxaPortReadData(int port, struct tty_struct *tty);
1650 * int port : port number (0 - 127)
1651 * struct tty_struct *tty : tty for data
1652 *
1653 * return: 0 - length : real read data length
1654 *
1655 *
1656 * Function 24: Get the Tx buffer current queued data bytes
1657 * Syntax:
1658 * int MoxaPortTxQueue(int port);
1659 * int port : port number (0 - 127)
1660 *
1661 * return: .. : Tx buffer current queued data bytes
1662 *
1663 *
1664 * Function 25: Get the Tx buffer current free space
1665 * Syntax:
1666 * int MoxaPortTxFree(int port);
1667 * int port : port number (0 - 127)
1668 *
1669 * return: .. : Tx buffer current free space
1670 *
1671 *
1672 * Function 26: Get the Rx buffer current queued data bytes
1673 * Syntax:
1674 * int MoxaPortRxQueue(int port);
1675 * int port : port number (0 - 127)
1676 *
1677 * return: .. : Rx buffer current queued data bytes
1678 *
1679 *
1680 * Function 28: Disable port data transmission.
1681 * Syntax:
1682 * void MoxaPortTxDisable(int port);
1683 * int port : port number (0 - 127)
1684 *
1685 *
1686 * Function 29: Enable port data transmission.
1687 * Syntax:
1688 * void MoxaPortTxEnable(int port);
1689 * int port : port number (0 - 127)
1690 *
1691 *
1692 * Function 31: Get the received BREAK signal count and reset it.
1693 * Syntax:
1694 * int MoxaPortResetBrkCnt(int port);
1695 * int port : port number (0 - 127)
1696 *
1697 * return: 0 - .. : BREAK signal count
1698 *
1699 *
1700 */
1701
1702static void MoxaPortEnable(struct moxa_port *port)
1703{
1704 void __iomem *ofsAddr;
1705 u16 lowwater = 512;
1706
1707 ofsAddr = port->tableAddr;
1708 writew(lowwater, ofsAddr + Low_water);
1709 if (MOXA_IS_320(port->board))
1710 moxafunc(ofsAddr, FC_SetBreakIrq, 0);
1711 else
1712 writew(readw(ofsAddr + HostStat) | WakeupBreak,
1713 ofsAddr + HostStat);
1714
1715 moxafunc(ofsAddr, FC_SetLineIrq, Magic_code);
1716 moxafunc(ofsAddr, FC_FlushQueue, 2);
1717
1718 moxafunc(ofsAddr, FC_EnableCH, Magic_code);
1719 MoxaPortLineStatus(port);
1720}
1721
1722static void MoxaPortDisable(struct moxa_port *port)
1723{
1724 void __iomem *ofsAddr = port->tableAddr;
1725
1726 moxafunc(ofsAddr, FC_SetFlowCtl, 0); /* disable flow control */
1727 moxafunc(ofsAddr, FC_ClrLineIrq, Magic_code);
1728 writew(0, ofsAddr + HostStat);
1729 moxafunc(ofsAddr, FC_DisableCH, Magic_code);
1730}
1731
1732static speed_t MoxaPortSetBaud(struct moxa_port *port, speed_t baud)
1733{
1734 void __iomem *ofsAddr = port->tableAddr;
1735 unsigned int clock, val;
1736 speed_t max;
1737
1738 max = MOXA_IS_320(port->board) ? 460800 : 921600;
1739 if (baud < 50)
1740 return 0;
1741 if (baud > max)
1742 baud = max;
1743 clock = 921600;
1744 val = clock / baud;
1745 moxafunc(ofsAddr, FC_SetBaud, val);
1746 baud = clock / val;
1747 return baud;
1748}
1749
1750static int MoxaPortSetTermio(struct moxa_port *port, struct ktermios *termio,
1751 speed_t baud)
1752{
1753 void __iomem *ofsAddr;
1754 tcflag_t mode = 0;
1755
1756 ofsAddr = port->tableAddr;
1757
1758 mode = termio->c_cflag & CSIZE;
1759 if (mode == CS5)
1760 mode = MX_CS5;
1761 else if (mode == CS6)
1762 mode = MX_CS6;
1763 else if (mode == CS7)
1764 mode = MX_CS7;
1765 else if (mode == CS8)
1766 mode = MX_CS8;
1767
1768 if (termio->c_cflag & CSTOPB) {
1769 if (mode == MX_CS5)
1770 mode |= MX_STOP15;
1771 else
1772 mode |= MX_STOP2;
1773 } else
1774 mode |= MX_STOP1;
1775
1776 if (termio->c_cflag & PARENB) {
1777 if (termio->c_cflag & PARODD)
1778 mode |= MX_PARODD;
1779 else
1780 mode |= MX_PAREVEN;
1781 } else
1782 mode |= MX_PARNONE;
1783
1784 moxafunc(ofsAddr, FC_SetDataMode, (u16)mode);
1785
1786 if (MOXA_IS_320(port->board) && baud >= 921600)
1787 return -1;
1788
1789 baud = MoxaPortSetBaud(port, baud);
1790
1791 if (termio->c_iflag & (IXON | IXOFF | IXANY)) {
1792 spin_lock_irq(&moxafunc_lock);
1793 writeb(termio->c_cc[VSTART], ofsAddr + FuncArg);
1794 writeb(termio->c_cc[VSTOP], ofsAddr + FuncArg1);
1795 writeb(FC_SetXonXoff, ofsAddr + FuncCode);
1796 moxa_wait_finish(ofsAddr);
1797 spin_unlock_irq(&moxafunc_lock);
1798
1799 }
1800 return baud;
1801}
1802
1803static int MoxaPortGetLineOut(struct moxa_port *port, int *dtrState,
1804 int *rtsState)
1805{
1806 if (dtrState)
1807 *dtrState = !!(port->lineCtrl & DTR_ON);
1808 if (rtsState)
1809 *rtsState = !!(port->lineCtrl & RTS_ON);
1810
1811 return 0;
1812}
1813
1814static void MoxaPortLineCtrl(struct moxa_port *port, int dtr, int rts)
1815{
1816 u8 mode = 0;
1817
1818 if (dtr)
1819 mode |= DTR_ON;
1820 if (rts)
1821 mode |= RTS_ON;
1822 port->lineCtrl = mode;
1823 moxafunc(port->tableAddr, FC_LineControl, mode);
1824}
1825
1826static void MoxaPortFlowCtrl(struct moxa_port *port, int rts, int cts,
1827 int txflow, int rxflow, int txany)
1828{
1829 int mode = 0;
1830
1831 if (rts)
1832 mode |= RTS_FlowCtl;
1833 if (cts)
1834 mode |= CTS_FlowCtl;
1835 if (txflow)
1836 mode |= Tx_FlowCtl;
1837 if (rxflow)
1838 mode |= Rx_FlowCtl;
1839 if (txany)
1840 mode |= IXM_IXANY;
1841 moxafunc(port->tableAddr, FC_SetFlowCtl, mode);
1842}
1843
1844static int MoxaPortLineStatus(struct moxa_port *port)
1845{
1846 void __iomem *ofsAddr;
1847 int val;
1848
1849 ofsAddr = port->tableAddr;
1850 if (MOXA_IS_320(port->board))
1851 val = moxafuncret(ofsAddr, FC_LineStatus, 0);
1852 else
1853 val = readw(ofsAddr + FlagStat) >> 4;
1854 val &= 0x0B;
1855 if (val & 8)
1856 val |= 4;
1857 moxa_new_dcdstate(port, val & 8);
1858 val &= 7;
1859 return val;
1860}
1861
1862static int MoxaPortWriteData(struct tty_struct *tty,
1863 const unsigned char *buffer, int len)
1864{
1865 struct moxa_port *port = tty->driver_data;
1866 void __iomem *baseAddr, *ofsAddr, *ofs;
1867 unsigned int c, total;
1868 u16 head, tail, tx_mask, spage, epage;
1869 u16 pageno, pageofs, bufhead;
1870
1871 ofsAddr = port->tableAddr;
1872 baseAddr = port->board->basemem;
1873 tx_mask = readw(ofsAddr + TX_mask);
1874 spage = readw(ofsAddr + Page_txb);
1875 epage = readw(ofsAddr + EndPage_txb);
1876 tail = readw(ofsAddr + TXwptr);
1877 head = readw(ofsAddr + TXrptr);
1878 c = (head > tail) ? (head - tail - 1) : (head - tail + tx_mask);
1879 if (c > len)
1880 c = len;
1881 moxaLog.txcnt[port->port.tty->index] += c;
1882 total = c;
1883 if (spage == epage) {
1884 bufhead = readw(ofsAddr + Ofs_txb);
1885 writew(spage, baseAddr + Control_reg);
1886 while (c > 0) {
1887 if (head > tail)
1888 len = head - tail - 1;
1889 else
1890 len = tx_mask + 1 - tail;
1891 len = (c > len) ? len : c;
1892 ofs = baseAddr + DynPage_addr + bufhead + tail;
1893 memcpy_toio(ofs, buffer, len);
1894 buffer += len;
1895 tail = (tail + len) & tx_mask;
1896 c -= len;
1897 }
1898 } else {
1899 pageno = spage + (tail >> 13);
1900 pageofs = tail & Page_mask;
1901 while (c > 0) {
1902 len = Page_size - pageofs;
1903 if (len > c)
1904 len = c;
1905 writeb(pageno, baseAddr + Control_reg);
1906 ofs = baseAddr + DynPage_addr + pageofs;
1907 memcpy_toio(ofs, buffer, len);
1908 buffer += len;
1909 if (++pageno == epage)
1910 pageno = spage;
1911 pageofs = 0;
1912 c -= len;
1913 }
1914 tail = (tail + total) & tx_mask;
1915 }
1916 writew(tail, ofsAddr + TXwptr);
1917 writeb(1, ofsAddr + CD180TXirq); /* start to send */
1918 return total;
1919}
1920
1921static int MoxaPortReadData(struct moxa_port *port)
1922{
1923 struct tty_struct *tty = port->port.tty;
1924 unsigned char *dst;
1925 void __iomem *baseAddr, *ofsAddr, *ofs;
1926 unsigned int count, len, total;
1927 u16 tail, rx_mask, spage, epage;
1928 u16 pageno, pageofs, bufhead, head;
1929
1930 ofsAddr = port->tableAddr;
1931 baseAddr = port->board->basemem;
1932 head = readw(ofsAddr + RXrptr);
1933 tail = readw(ofsAddr + RXwptr);
1934 rx_mask = readw(ofsAddr + RX_mask);
1935 spage = readw(ofsAddr + Page_rxb);
1936 epage = readw(ofsAddr + EndPage_rxb);
1937 count = (tail >= head) ? (tail - head) : (tail - head + rx_mask + 1);
1938 if (count == 0)
1939 return 0;
1940
1941 total = count;
1942 moxaLog.rxcnt[tty->index] += total;
1943 if (spage == epage) {
1944 bufhead = readw(ofsAddr + Ofs_rxb);
1945 writew(spage, baseAddr + Control_reg);
1946 while (count > 0) {
1947 ofs = baseAddr + DynPage_addr + bufhead + head;
1948 len = (tail >= head) ? (tail - head) :
1949 (rx_mask + 1 - head);
1950 len = tty_prepare_flip_string(tty, &dst,
1951 min(len, count));
1952 memcpy_fromio(dst, ofs, len);
1953 head = (head + len) & rx_mask;
1954 count -= len;
1955 }
1956 } else {
1957 pageno = spage + (head >> 13);
1958 pageofs = head & Page_mask;
1959 while (count > 0) {
1960 writew(pageno, baseAddr + Control_reg);
1961 ofs = baseAddr + DynPage_addr + pageofs;
1962 len = tty_prepare_flip_string(tty, &dst,
1963 min(Page_size - pageofs, count));
1964 memcpy_fromio(dst, ofs, len);
1965
1966 count -= len;
1967 pageofs = (pageofs + len) & Page_mask;
1968 if (pageofs == 0 && ++pageno == epage)
1969 pageno = spage;
1970 }
1971 head = (head + total) & rx_mask;
1972 }
1973 writew(head, ofsAddr + RXrptr);
1974 if (readb(ofsAddr + FlagStat) & Xoff_state) {
1975 moxaLowWaterChk = 1;
1976 port->lowChkFlag = 1;
1977 }
1978 return total;
1979}
1980
1981
1982static int MoxaPortTxQueue(struct moxa_port *port)
1983{
1984 void __iomem *ofsAddr = port->tableAddr;
1985 u16 rptr, wptr, mask;
1986
1987 rptr = readw(ofsAddr + TXrptr);
1988 wptr = readw(ofsAddr + TXwptr);
1989 mask = readw(ofsAddr + TX_mask);
1990 return (wptr - rptr) & mask;
1991}
1992
1993static int MoxaPortTxFree(struct moxa_port *port)
1994{
1995 void __iomem *ofsAddr = port->tableAddr;
1996 u16 rptr, wptr, mask;
1997
1998 rptr = readw(ofsAddr + TXrptr);
1999 wptr = readw(ofsAddr + TXwptr);
2000 mask = readw(ofsAddr + TX_mask);
2001 return mask - ((wptr - rptr) & mask);
2002}
2003
2004static int MoxaPortRxQueue(struct moxa_port *port)
2005{
2006 void __iomem *ofsAddr = port->tableAddr;
2007 u16 rptr, wptr, mask;
2008
2009 rptr = readw(ofsAddr + RXrptr);
2010 wptr = readw(ofsAddr + RXwptr);
2011 mask = readw(ofsAddr + RX_mask);
2012 return (wptr - rptr) & mask;
2013}
2014
2015static void MoxaPortTxDisable(struct moxa_port *port)
2016{
2017 moxafunc(port->tableAddr, FC_SetXoffState, Magic_code);
2018}
2019
2020static void MoxaPortTxEnable(struct moxa_port *port)
2021{
2022 moxafunc(port->tableAddr, FC_SetXonState, Magic_code);
2023}
2024
2025static int moxa_get_serial_info(struct moxa_port *info,
2026 struct serial_struct __user *retinfo)
2027{
2028 struct serial_struct tmp = {
2029 .type = info->type,
2030 .line = info->port.tty->index,
2031 .flags = info->port.flags,
2032 .baud_base = 921600,
2033 .close_delay = info->port.close_delay
2034 };
2035 return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0;
2036}
2037
2038
2039static int moxa_set_serial_info(struct moxa_port *info,
2040 struct serial_struct __user *new_info)
2041{
2042 struct serial_struct new_serial;
2043
2044 if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
2045 return -EFAULT;
2046
2047 if (new_serial.irq != 0 || new_serial.port != 0 ||
2048 new_serial.custom_divisor != 0 ||
2049 new_serial.baud_base != 921600)
2050 return -EPERM;
2051
2052 if (!capable(CAP_SYS_ADMIN)) {
2053 if (((new_serial.flags & ~ASYNC_USR_MASK) !=
2054 (info->port.flags & ~ASYNC_USR_MASK)))
2055 return -EPERM;
2056 } else
2057 info->port.close_delay = new_serial.close_delay * HZ / 100;
2058
2059 new_serial.flags = (new_serial.flags & ~ASYNC_FLAGS);
2060 new_serial.flags |= (info->port.flags & ASYNC_FLAGS);
2061
2062 MoxaSetFifo(info, new_serial.type == PORT_16550A);
2063
2064 info->type = new_serial.type;
2065 return 0;
2066}
2067
2068
2069
2070/*****************************************************************************
2071 * Static local functions: *
2072 *****************************************************************************/
2073
2074static void MoxaSetFifo(struct moxa_port *port, int enable)
2075{
2076 void __iomem *ofsAddr = port->tableAddr;
2077
2078 if (!enable) {
2079 moxafunc(ofsAddr, FC_SetRxFIFOTrig, 0);
2080 moxafunc(ofsAddr, FC_SetTxFIFOCnt, 1);
2081 } else {
2082 moxafunc(ofsAddr, FC_SetRxFIFOTrig, 3);
2083 moxafunc(ofsAddr, FC_SetTxFIFOCnt, 16);
2084 }
2085}
1// SPDX-License-Identifier: GPL-2.0+
2/*****************************************************************************/
3/*
4 * moxa.c -- MOXA Intellio family multiport serial driver.
5 *
6 * Copyright (C) 1999-2000 Moxa Technologies (support@moxa.com).
7 * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
8 *
9 * This code is loosely based on the Linux serial driver, written by
10 * Linus Torvalds, Theodore T'so and others.
11 */
12
13/*
14 * MOXA Intellio Series Driver
15 * for : LINUX
16 * date : 1999/1/7
17 * version : 5.1
18 */
19
20#include <linux/module.h>
21#include <linux/types.h>
22#include <linux/mm.h>
23#include <linux/ioport.h>
24#include <linux/errno.h>
25#include <linux/firmware.h>
26#include <linux/signal.h>
27#include <linux/sched.h>
28#include <linux/timer.h>
29#include <linux/interrupt.h>
30#include <linux/tty.h>
31#include <linux/tty_flip.h>
32#include <linux/major.h>
33#include <linux/string.h>
34#include <linux/fcntl.h>
35#include <linux/ptrace.h>
36#include <linux/serial.h>
37#include <linux/tty_driver.h>
38#include <linux/delay.h>
39#include <linux/pci.h>
40#include <linux/init.h>
41#include <linux/bitops.h>
42#include <linux/slab.h>
43#include <linux/ratelimit.h>
44
45#include <asm/io.h>
46#include <linux/uaccess.h>
47
48#include "moxa.h"
49
50#define MOXA_VERSION "6.0k"
51
52#define MOXA_FW_HDRLEN 32
53
54#define MOXAMAJOR 172
55
56#define MAX_BOARDS 4 /* Don't change this value */
57#define MAX_PORTS_PER_BOARD 32 /* Don't change this value */
58#define MAX_PORTS (MAX_BOARDS * MAX_PORTS_PER_BOARD)
59
60#define MOXA_IS_320(brd) ((brd)->boardType == MOXA_BOARD_C320_ISA || \
61 (brd)->boardType == MOXA_BOARD_C320_PCI)
62
63/*
64 * Define the Moxa PCI vendor and device IDs.
65 */
66#define MOXA_BUS_TYPE_ISA 0
67#define MOXA_BUS_TYPE_PCI 1
68
69enum {
70 MOXA_BOARD_C218_PCI = 1,
71 MOXA_BOARD_C218_ISA,
72 MOXA_BOARD_C320_PCI,
73 MOXA_BOARD_C320_ISA,
74 MOXA_BOARD_CP204J,
75};
76
77static char *moxa_brdname[] =
78{
79 "C218 Turbo PCI series",
80 "C218 Turbo ISA series",
81 "C320 Turbo PCI series",
82 "C320 Turbo ISA series",
83 "CP-204J series",
84};
85
86#ifdef CONFIG_PCI
87static const struct pci_device_id moxa_pcibrds[] = {
88 { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C218),
89 .driver_data = MOXA_BOARD_C218_PCI },
90 { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C320),
91 .driver_data = MOXA_BOARD_C320_PCI },
92 { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP204J),
93 .driver_data = MOXA_BOARD_CP204J },
94 { 0 }
95};
96MODULE_DEVICE_TABLE(pci, moxa_pcibrds);
97#endif /* CONFIG_PCI */
98
99struct moxa_port;
100
101static struct moxa_board_conf {
102 int boardType;
103 int numPorts;
104 int busType;
105
106 unsigned int ready;
107
108 struct moxa_port *ports;
109
110 void __iomem *basemem;
111 void __iomem *intNdx;
112 void __iomem *intPend;
113 void __iomem *intTable;
114} moxa_boards[MAX_BOARDS];
115
116struct mxser_mstatus {
117 tcflag_t cflag;
118 int cts;
119 int dsr;
120 int ri;
121 int dcd;
122};
123
124struct moxaq_str {
125 int inq;
126 int outq;
127};
128
129struct moxa_port {
130 struct tty_port port;
131 struct moxa_board_conf *board;
132 void __iomem *tableAddr;
133
134 int type;
135 int cflag;
136 unsigned long statusflags;
137
138 u8 DCDState; /* Protected by the port lock */
139 u8 lineCtrl;
140 u8 lowChkFlag;
141};
142
143struct mon_str {
144 int tick;
145 int rxcnt[MAX_PORTS];
146 int txcnt[MAX_PORTS];
147};
148
149/* statusflags */
150#define TXSTOPPED 1
151#define LOWWAIT 2
152#define EMPTYWAIT 3
153
154
155#define WAKEUP_CHARS 256
156
157static int ttymajor = MOXAMAJOR;
158static struct mon_str moxaLog;
159static unsigned int moxaFuncTout = HZ / 2;
160static unsigned int moxaLowWaterChk;
161static DEFINE_MUTEX(moxa_openlock);
162static DEFINE_SPINLOCK(moxa_lock);
163
164static unsigned long baseaddr[MAX_BOARDS];
165static unsigned int type[MAX_BOARDS];
166static unsigned int numports[MAX_BOARDS];
167static struct tty_port moxa_service_port;
168
169MODULE_AUTHOR("William Chen");
170MODULE_DESCRIPTION("MOXA Intellio Family Multiport Board Device Driver");
171MODULE_LICENSE("GPL");
172MODULE_FIRMWARE("c218tunx.cod");
173MODULE_FIRMWARE("cp204unx.cod");
174MODULE_FIRMWARE("c320tunx.cod");
175
176module_param_array(type, uint, NULL, 0);
177MODULE_PARM_DESC(type, "card type: C218=2, C320=4");
178module_param_hw_array(baseaddr, ulong, ioport, NULL, 0);
179MODULE_PARM_DESC(baseaddr, "base address");
180module_param_array(numports, uint, NULL, 0);
181MODULE_PARM_DESC(numports, "numports (ignored for C218)");
182
183module_param(ttymajor, int, 0);
184
185/*
186 * static functions:
187 */
188static int moxa_open(struct tty_struct *, struct file *);
189static void moxa_close(struct tty_struct *, struct file *);
190static int moxa_write(struct tty_struct *, const unsigned char *, int);
191static int moxa_write_room(struct tty_struct *);
192static void moxa_flush_buffer(struct tty_struct *);
193static int moxa_chars_in_buffer(struct tty_struct *);
194static void moxa_set_termios(struct tty_struct *, struct ktermios *);
195static void moxa_stop(struct tty_struct *);
196static void moxa_start(struct tty_struct *);
197static void moxa_hangup(struct tty_struct *);
198static int moxa_tiocmget(struct tty_struct *tty);
199static int moxa_tiocmset(struct tty_struct *tty,
200 unsigned int set, unsigned int clear);
201static void moxa_poll(struct timer_list *);
202static void moxa_set_tty_param(struct tty_struct *, struct ktermios *);
203static void moxa_shutdown(struct tty_port *);
204static int moxa_carrier_raised(struct tty_port *);
205static void moxa_dtr_rts(struct tty_port *, int);
206/*
207 * moxa board interface functions:
208 */
209static void MoxaPortEnable(struct moxa_port *);
210static void MoxaPortDisable(struct moxa_port *);
211static int MoxaPortSetTermio(struct moxa_port *, struct ktermios *, speed_t);
212static int MoxaPortGetLineOut(struct moxa_port *, int *, int *);
213static void MoxaPortLineCtrl(struct moxa_port *, int, int);
214static void MoxaPortFlowCtrl(struct moxa_port *, int, int, int, int, int);
215static int MoxaPortLineStatus(struct moxa_port *);
216static void MoxaPortFlushData(struct moxa_port *, int);
217static int MoxaPortWriteData(struct tty_struct *, const unsigned char *, int);
218static int MoxaPortReadData(struct moxa_port *);
219static int MoxaPortTxQueue(struct moxa_port *);
220static int MoxaPortRxQueue(struct moxa_port *);
221static int MoxaPortTxFree(struct moxa_port *);
222static void MoxaPortTxDisable(struct moxa_port *);
223static void MoxaPortTxEnable(struct moxa_port *);
224static int moxa_get_serial_info(struct moxa_port *, struct serial_struct __user *);
225static int moxa_set_serial_info(struct moxa_port *, struct serial_struct __user *);
226static void MoxaSetFifo(struct moxa_port *port, int enable);
227
228/*
229 * I/O functions
230 */
231
232static DEFINE_SPINLOCK(moxafunc_lock);
233
234static void moxa_wait_finish(void __iomem *ofsAddr)
235{
236 unsigned long end = jiffies + moxaFuncTout;
237
238 while (readw(ofsAddr + FuncCode) != 0)
239 if (time_after(jiffies, end))
240 return;
241 if (readw(ofsAddr + FuncCode) != 0)
242 printk_ratelimited(KERN_WARNING "moxa function expired\n");
243}
244
245static void moxafunc(void __iomem *ofsAddr, u16 cmd, u16 arg)
246{
247 unsigned long flags;
248 spin_lock_irqsave(&moxafunc_lock, flags);
249 writew(arg, ofsAddr + FuncArg);
250 writew(cmd, ofsAddr + FuncCode);
251 moxa_wait_finish(ofsAddr);
252 spin_unlock_irqrestore(&moxafunc_lock, flags);
253}
254
255static int moxafuncret(void __iomem *ofsAddr, u16 cmd, u16 arg)
256{
257 unsigned long flags;
258 u16 ret;
259 spin_lock_irqsave(&moxafunc_lock, flags);
260 writew(arg, ofsAddr + FuncArg);
261 writew(cmd, ofsAddr + FuncCode);
262 moxa_wait_finish(ofsAddr);
263 ret = readw(ofsAddr + FuncArg);
264 spin_unlock_irqrestore(&moxafunc_lock, flags);
265 return ret;
266}
267
268static void moxa_low_water_check(void __iomem *ofsAddr)
269{
270 u16 rptr, wptr, mask, len;
271
272 if (readb(ofsAddr + FlagStat) & Xoff_state) {
273 rptr = readw(ofsAddr + RXrptr);
274 wptr = readw(ofsAddr + RXwptr);
275 mask = readw(ofsAddr + RX_mask);
276 len = (wptr - rptr) & mask;
277 if (len <= Low_water)
278 moxafunc(ofsAddr, FC_SendXon, 0);
279 }
280}
281
282/*
283 * TTY operations
284 */
285
286static int moxa_ioctl(struct tty_struct *tty,
287 unsigned int cmd, unsigned long arg)
288{
289 struct moxa_port *ch = tty->driver_data;
290 void __user *argp = (void __user *)arg;
291 int status, ret = 0;
292
293 if (tty->index == MAX_PORTS) {
294 if (cmd != MOXA_GETDATACOUNT && cmd != MOXA_GET_IOQUEUE &&
295 cmd != MOXA_GETMSTATUS)
296 return -EINVAL;
297 } else if (!ch)
298 return -ENODEV;
299
300 switch (cmd) {
301 case MOXA_GETDATACOUNT:
302 moxaLog.tick = jiffies;
303 if (copy_to_user(argp, &moxaLog, sizeof(moxaLog)))
304 ret = -EFAULT;
305 break;
306 case MOXA_FLUSH_QUEUE:
307 MoxaPortFlushData(ch, arg);
308 break;
309 case MOXA_GET_IOQUEUE: {
310 struct moxaq_str __user *argm = argp;
311 struct moxaq_str tmp;
312 struct moxa_port *p;
313 unsigned int i, j;
314
315 for (i = 0; i < MAX_BOARDS; i++) {
316 p = moxa_boards[i].ports;
317 for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) {
318 memset(&tmp, 0, sizeof(tmp));
319 spin_lock_bh(&moxa_lock);
320 if (moxa_boards[i].ready) {
321 tmp.inq = MoxaPortRxQueue(p);
322 tmp.outq = MoxaPortTxQueue(p);
323 }
324 spin_unlock_bh(&moxa_lock);
325 if (copy_to_user(argm, &tmp, sizeof(tmp)))
326 return -EFAULT;
327 }
328 }
329 break;
330 } case MOXA_GET_OQUEUE:
331 status = MoxaPortTxQueue(ch);
332 ret = put_user(status, (unsigned long __user *)argp);
333 break;
334 case MOXA_GET_IQUEUE:
335 status = MoxaPortRxQueue(ch);
336 ret = put_user(status, (unsigned long __user *)argp);
337 break;
338 case MOXA_GETMSTATUS: {
339 struct mxser_mstatus __user *argm = argp;
340 struct mxser_mstatus tmp;
341 struct moxa_port *p;
342 unsigned int i, j;
343
344 for (i = 0; i < MAX_BOARDS; i++) {
345 p = moxa_boards[i].ports;
346 for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) {
347 struct tty_struct *ttyp;
348 memset(&tmp, 0, sizeof(tmp));
349 spin_lock_bh(&moxa_lock);
350 if (!moxa_boards[i].ready) {
351 spin_unlock_bh(&moxa_lock);
352 goto copy;
353 }
354
355 status = MoxaPortLineStatus(p);
356 spin_unlock_bh(&moxa_lock);
357
358 if (status & 1)
359 tmp.cts = 1;
360 if (status & 2)
361 tmp.dsr = 1;
362 if (status & 4)
363 tmp.dcd = 1;
364
365 ttyp = tty_port_tty_get(&p->port);
366 if (!ttyp)
367 tmp.cflag = p->cflag;
368 else
369 tmp.cflag = ttyp->termios.c_cflag;
370 tty_kref_put(ttyp);
371copy:
372 if (copy_to_user(argm, &tmp, sizeof(tmp)))
373 return -EFAULT;
374 }
375 }
376 break;
377 }
378 case TIOCGSERIAL:
379 mutex_lock(&ch->port.mutex);
380 ret = moxa_get_serial_info(ch, argp);
381 mutex_unlock(&ch->port.mutex);
382 break;
383 case TIOCSSERIAL:
384 mutex_lock(&ch->port.mutex);
385 ret = moxa_set_serial_info(ch, argp);
386 mutex_unlock(&ch->port.mutex);
387 break;
388 default:
389 ret = -ENOIOCTLCMD;
390 }
391 return ret;
392}
393
394static int moxa_break_ctl(struct tty_struct *tty, int state)
395{
396 struct moxa_port *port = tty->driver_data;
397
398 moxafunc(port->tableAddr, state ? FC_SendBreak : FC_StopBreak,
399 Magic_code);
400 return 0;
401}
402
403static const struct tty_operations moxa_ops = {
404 .open = moxa_open,
405 .close = moxa_close,
406 .write = moxa_write,
407 .write_room = moxa_write_room,
408 .flush_buffer = moxa_flush_buffer,
409 .chars_in_buffer = moxa_chars_in_buffer,
410 .ioctl = moxa_ioctl,
411 .set_termios = moxa_set_termios,
412 .stop = moxa_stop,
413 .start = moxa_start,
414 .hangup = moxa_hangup,
415 .break_ctl = moxa_break_ctl,
416 .tiocmget = moxa_tiocmget,
417 .tiocmset = moxa_tiocmset,
418};
419
420static const struct tty_port_operations moxa_port_ops = {
421 .carrier_raised = moxa_carrier_raised,
422 .dtr_rts = moxa_dtr_rts,
423 .shutdown = moxa_shutdown,
424};
425
426static struct tty_driver *moxaDriver;
427static DEFINE_TIMER(moxaTimer, moxa_poll);
428
429/*
430 * HW init
431 */
432
433static int moxa_check_fw_model(struct moxa_board_conf *brd, u8 model)
434{
435 switch (brd->boardType) {
436 case MOXA_BOARD_C218_ISA:
437 case MOXA_BOARD_C218_PCI:
438 if (model != 1)
439 goto err;
440 break;
441 case MOXA_BOARD_CP204J:
442 if (model != 3)
443 goto err;
444 break;
445 default:
446 if (model != 2)
447 goto err;
448 break;
449 }
450 return 0;
451err:
452 return -EINVAL;
453}
454
455static int moxa_check_fw(const void *ptr)
456{
457 const __le16 *lptr = ptr;
458
459 if (*lptr != cpu_to_le16(0x7980))
460 return -EINVAL;
461
462 return 0;
463}
464
465static int moxa_load_bios(struct moxa_board_conf *brd, const u8 *buf,
466 size_t len)
467{
468 void __iomem *baseAddr = brd->basemem;
469 u16 tmp;
470
471 writeb(HW_reset, baseAddr + Control_reg); /* reset */
472 msleep(10);
473 memset_io(baseAddr, 0, 4096);
474 memcpy_toio(baseAddr, buf, len); /* download BIOS */
475 writeb(0, baseAddr + Control_reg); /* restart */
476
477 msleep(2000);
478
479 switch (brd->boardType) {
480 case MOXA_BOARD_C218_ISA:
481 case MOXA_BOARD_C218_PCI:
482 tmp = readw(baseAddr + C218_key);
483 if (tmp != C218_KeyCode)
484 goto err;
485 break;
486 case MOXA_BOARD_CP204J:
487 tmp = readw(baseAddr + C218_key);
488 if (tmp != CP204J_KeyCode)
489 goto err;
490 break;
491 default:
492 tmp = readw(baseAddr + C320_key);
493 if (tmp != C320_KeyCode)
494 goto err;
495 tmp = readw(baseAddr + C320_status);
496 if (tmp != STS_init) {
497 printk(KERN_ERR "MOXA: bios upload failed -- CPU/Basic "
498 "module not found\n");
499 return -EIO;
500 }
501 break;
502 }
503
504 return 0;
505err:
506 printk(KERN_ERR "MOXA: bios upload failed -- board not found\n");
507 return -EIO;
508}
509
510static int moxa_load_320b(struct moxa_board_conf *brd, const u8 *ptr,
511 size_t len)
512{
513 void __iomem *baseAddr = brd->basemem;
514
515 if (len < 7168) {
516 printk(KERN_ERR "MOXA: invalid 320 bios -- too short\n");
517 return -EINVAL;
518 }
519
520 writew(len - 7168 - 2, baseAddr + C320bapi_len);
521 writeb(1, baseAddr + Control_reg); /* Select Page 1 */
522 memcpy_toio(baseAddr + DynPage_addr, ptr, 7168);
523 writeb(2, baseAddr + Control_reg); /* Select Page 2 */
524 memcpy_toio(baseAddr + DynPage_addr, ptr + 7168, len - 7168);
525
526 return 0;
527}
528
529static int moxa_real_load_code(struct moxa_board_conf *brd, const void *ptr,
530 size_t len)
531{
532 void __iomem *baseAddr = brd->basemem;
533 const __le16 *uptr = ptr;
534 size_t wlen, len2, j;
535 unsigned long key, loadbuf, loadlen, checksum, checksum_ok;
536 unsigned int i, retry;
537 u16 usum, keycode;
538
539 keycode = (brd->boardType == MOXA_BOARD_CP204J) ? CP204J_KeyCode :
540 C218_KeyCode;
541
542 switch (brd->boardType) {
543 case MOXA_BOARD_CP204J:
544 case MOXA_BOARD_C218_ISA:
545 case MOXA_BOARD_C218_PCI:
546 key = C218_key;
547 loadbuf = C218_LoadBuf;
548 loadlen = C218DLoad_len;
549 checksum = C218check_sum;
550 checksum_ok = C218chksum_ok;
551 break;
552 default:
553 key = C320_key;
554 keycode = C320_KeyCode;
555 loadbuf = C320_LoadBuf;
556 loadlen = C320DLoad_len;
557 checksum = C320check_sum;
558 checksum_ok = C320chksum_ok;
559 break;
560 }
561
562 usum = 0;
563 wlen = len >> 1;
564 for (i = 0; i < wlen; i++)
565 usum += le16_to_cpu(uptr[i]);
566 retry = 0;
567 do {
568 wlen = len >> 1;
569 j = 0;
570 while (wlen) {
571 len2 = (wlen > 2048) ? 2048 : wlen;
572 wlen -= len2;
573 memcpy_toio(baseAddr + loadbuf, ptr + j, len2 << 1);
574 j += len2 << 1;
575
576 writew(len2, baseAddr + loadlen);
577 writew(0, baseAddr + key);
578 for (i = 0; i < 100; i++) {
579 if (readw(baseAddr + key) == keycode)
580 break;
581 msleep(10);
582 }
583 if (readw(baseAddr + key) != keycode)
584 return -EIO;
585 }
586 writew(0, baseAddr + loadlen);
587 writew(usum, baseAddr + checksum);
588 writew(0, baseAddr + key);
589 for (i = 0; i < 100; i++) {
590 if (readw(baseAddr + key) == keycode)
591 break;
592 msleep(10);
593 }
594 retry++;
595 } while ((readb(baseAddr + checksum_ok) != 1) && (retry < 3));
596 if (readb(baseAddr + checksum_ok) != 1)
597 return -EIO;
598
599 writew(0, baseAddr + key);
600 for (i = 0; i < 600; i++) {
601 if (readw(baseAddr + Magic_no) == Magic_code)
602 break;
603 msleep(10);
604 }
605 if (readw(baseAddr + Magic_no) != Magic_code)
606 return -EIO;
607
608 if (MOXA_IS_320(brd)) {
609 if (brd->busType == MOXA_BUS_TYPE_PCI) { /* ASIC board */
610 writew(0x3800, baseAddr + TMS320_PORT1);
611 writew(0x3900, baseAddr + TMS320_PORT2);
612 writew(28499, baseAddr + TMS320_CLOCK);
613 } else {
614 writew(0x3200, baseAddr + TMS320_PORT1);
615 writew(0x3400, baseAddr + TMS320_PORT2);
616 writew(19999, baseAddr + TMS320_CLOCK);
617 }
618 }
619 writew(1, baseAddr + Disable_IRQ);
620 writew(0, baseAddr + Magic_no);
621 for (i = 0; i < 500; i++) {
622 if (readw(baseAddr + Magic_no) == Magic_code)
623 break;
624 msleep(10);
625 }
626 if (readw(baseAddr + Magic_no) != Magic_code)
627 return -EIO;
628
629 if (MOXA_IS_320(brd)) {
630 j = readw(baseAddr + Module_cnt);
631 if (j <= 0)
632 return -EIO;
633 brd->numPorts = j * 8;
634 writew(j, baseAddr + Module_no);
635 writew(0, baseAddr + Magic_no);
636 for (i = 0; i < 600; i++) {
637 if (readw(baseAddr + Magic_no) == Magic_code)
638 break;
639 msleep(10);
640 }
641 if (readw(baseAddr + Magic_no) != Magic_code)
642 return -EIO;
643 }
644 brd->intNdx = baseAddr + IRQindex;
645 brd->intPend = baseAddr + IRQpending;
646 brd->intTable = baseAddr + IRQtable;
647
648 return 0;
649}
650
651static int moxa_load_code(struct moxa_board_conf *brd, const void *ptr,
652 size_t len)
653{
654 void __iomem *ofsAddr, *baseAddr = brd->basemem;
655 struct moxa_port *port;
656 int retval, i;
657
658 if (len % 2) {
659 printk(KERN_ERR "MOXA: bios length is not even\n");
660 return -EINVAL;
661 }
662
663 retval = moxa_real_load_code(brd, ptr, len); /* may change numPorts */
664 if (retval)
665 return retval;
666
667 switch (brd->boardType) {
668 case MOXA_BOARD_C218_ISA:
669 case MOXA_BOARD_C218_PCI:
670 case MOXA_BOARD_CP204J:
671 port = brd->ports;
672 for (i = 0; i < brd->numPorts; i++, port++) {
673 port->board = brd;
674 port->DCDState = 0;
675 port->tableAddr = baseAddr + Extern_table +
676 Extern_size * i;
677 ofsAddr = port->tableAddr;
678 writew(C218rx_mask, ofsAddr + RX_mask);
679 writew(C218tx_mask, ofsAddr + TX_mask);
680 writew(C218rx_spage + i * C218buf_pageno, ofsAddr + Page_rxb);
681 writew(readw(ofsAddr + Page_rxb) + C218rx_pageno, ofsAddr + EndPage_rxb);
682
683 writew(C218tx_spage + i * C218buf_pageno, ofsAddr + Page_txb);
684 writew(readw(ofsAddr + Page_txb) + C218tx_pageno, ofsAddr + EndPage_txb);
685
686 }
687 break;
688 default:
689 port = brd->ports;
690 for (i = 0; i < brd->numPorts; i++, port++) {
691 port->board = brd;
692 port->DCDState = 0;
693 port->tableAddr = baseAddr + Extern_table +
694 Extern_size * i;
695 ofsAddr = port->tableAddr;
696 switch (brd->numPorts) {
697 case 8:
698 writew(C320p8rx_mask, ofsAddr + RX_mask);
699 writew(C320p8tx_mask, ofsAddr + TX_mask);
700 writew(C320p8rx_spage + i * C320p8buf_pgno, ofsAddr + Page_rxb);
701 writew(readw(ofsAddr + Page_rxb) + C320p8rx_pgno, ofsAddr + EndPage_rxb);
702 writew(C320p8tx_spage + i * C320p8buf_pgno, ofsAddr + Page_txb);
703 writew(readw(ofsAddr + Page_txb) + C320p8tx_pgno, ofsAddr + EndPage_txb);
704
705 break;
706 case 16:
707 writew(C320p16rx_mask, ofsAddr + RX_mask);
708 writew(C320p16tx_mask, ofsAddr + TX_mask);
709 writew(C320p16rx_spage + i * C320p16buf_pgno, ofsAddr + Page_rxb);
710 writew(readw(ofsAddr + Page_rxb) + C320p16rx_pgno, ofsAddr + EndPage_rxb);
711 writew(C320p16tx_spage + i * C320p16buf_pgno, ofsAddr + Page_txb);
712 writew(readw(ofsAddr + Page_txb) + C320p16tx_pgno, ofsAddr + EndPage_txb);
713 break;
714
715 case 24:
716 writew(C320p24rx_mask, ofsAddr + RX_mask);
717 writew(C320p24tx_mask, ofsAddr + TX_mask);
718 writew(C320p24rx_spage + i * C320p24buf_pgno, ofsAddr + Page_rxb);
719 writew(readw(ofsAddr + Page_rxb) + C320p24rx_pgno, ofsAddr + EndPage_rxb);
720 writew(C320p24tx_spage + i * C320p24buf_pgno, ofsAddr + Page_txb);
721 writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb);
722 break;
723 case 32:
724 writew(C320p32rx_mask, ofsAddr + RX_mask);
725 writew(C320p32tx_mask, ofsAddr + TX_mask);
726 writew(C320p32tx_ofs, ofsAddr + Ofs_txb);
727 writew(C320p32rx_spage + i * C320p32buf_pgno, ofsAddr + Page_rxb);
728 writew(readb(ofsAddr + Page_rxb), ofsAddr + EndPage_rxb);
729 writew(C320p32tx_spage + i * C320p32buf_pgno, ofsAddr + Page_txb);
730 writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb);
731 break;
732 }
733 }
734 break;
735 }
736 return 0;
737}
738
739static int moxa_load_fw(struct moxa_board_conf *brd, const struct firmware *fw)
740{
741 const void *ptr = fw->data;
742 char rsn[64];
743 u16 lens[5];
744 size_t len;
745 unsigned int a, lenp, lencnt;
746 int ret = -EINVAL;
747 struct {
748 __le32 magic; /* 0x34303430 */
749 u8 reserved1[2];
750 u8 type; /* UNIX = 3 */
751 u8 model; /* C218T=1, C320T=2, CP204=3 */
752 u8 reserved2[8];
753 __le16 len[5];
754 } const *hdr = ptr;
755
756 BUILD_BUG_ON(ARRAY_SIZE(hdr->len) != ARRAY_SIZE(lens));
757
758 if (fw->size < MOXA_FW_HDRLEN) {
759 strcpy(rsn, "too short (even header won't fit)");
760 goto err;
761 }
762 if (hdr->magic != cpu_to_le32(0x30343034)) {
763 sprintf(rsn, "bad magic: %.8x", le32_to_cpu(hdr->magic));
764 goto err;
765 }
766 if (hdr->type != 3) {
767 sprintf(rsn, "not for linux, type is %u", hdr->type);
768 goto err;
769 }
770 if (moxa_check_fw_model(brd, hdr->model)) {
771 sprintf(rsn, "not for this card, model is %u", hdr->model);
772 goto err;
773 }
774
775 len = MOXA_FW_HDRLEN;
776 lencnt = hdr->model == 2 ? 5 : 3;
777 for (a = 0; a < ARRAY_SIZE(lens); a++) {
778 lens[a] = le16_to_cpu(hdr->len[a]);
779 if (lens[a] && len + lens[a] <= fw->size &&
780 moxa_check_fw(&fw->data[len]))
781 printk(KERN_WARNING "MOXA firmware: unexpected input "
782 "at offset %u, but going on\n", (u32)len);
783 if (!lens[a] && a < lencnt) {
784 sprintf(rsn, "too few entries in fw file");
785 goto err;
786 }
787 len += lens[a];
788 }
789
790 if (len != fw->size) {
791 sprintf(rsn, "bad length: %u (should be %u)", (u32)fw->size,
792 (u32)len);
793 goto err;
794 }
795
796 ptr += MOXA_FW_HDRLEN;
797 lenp = 0; /* bios */
798
799 strcpy(rsn, "read above");
800
801 ret = moxa_load_bios(brd, ptr, lens[lenp]);
802 if (ret)
803 goto err;
804
805 /* we skip the tty section (lens[1]), since we don't need it */
806 ptr += lens[lenp] + lens[lenp + 1];
807 lenp += 2; /* comm */
808
809 if (hdr->model == 2) {
810 ret = moxa_load_320b(brd, ptr, lens[lenp]);
811 if (ret)
812 goto err;
813 /* skip another tty */
814 ptr += lens[lenp] + lens[lenp + 1];
815 lenp += 2;
816 }
817
818 ret = moxa_load_code(brd, ptr, lens[lenp]);
819 if (ret)
820 goto err;
821
822 return 0;
823err:
824 printk(KERN_ERR "firmware failed to load, reason: %s\n", rsn);
825 return ret;
826}
827
828static int moxa_init_board(struct moxa_board_conf *brd, struct device *dev)
829{
830 const struct firmware *fw;
831 const char *file;
832 struct moxa_port *p;
833 unsigned int i, first_idx;
834 int ret;
835
836 brd->ports = kcalloc(MAX_PORTS_PER_BOARD, sizeof(*brd->ports),
837 GFP_KERNEL);
838 if (brd->ports == NULL) {
839 printk(KERN_ERR "cannot allocate memory for ports\n");
840 ret = -ENOMEM;
841 goto err;
842 }
843
844 for (i = 0, p = brd->ports; i < MAX_PORTS_PER_BOARD; i++, p++) {
845 tty_port_init(&p->port);
846 p->port.ops = &moxa_port_ops;
847 p->type = PORT_16550A;
848 p->cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
849 }
850
851 switch (brd->boardType) {
852 case MOXA_BOARD_C218_ISA:
853 case MOXA_BOARD_C218_PCI:
854 file = "c218tunx.cod";
855 break;
856 case MOXA_BOARD_CP204J:
857 file = "cp204unx.cod";
858 break;
859 default:
860 file = "c320tunx.cod";
861 break;
862 }
863
864 ret = request_firmware(&fw, file, dev);
865 if (ret) {
866 printk(KERN_ERR "MOXA: request_firmware failed. Make sure "
867 "you've placed '%s' file into your firmware "
868 "loader directory (e.g. /lib/firmware)\n",
869 file);
870 goto err_free;
871 }
872
873 ret = moxa_load_fw(brd, fw);
874
875 release_firmware(fw);
876
877 if (ret)
878 goto err_free;
879
880 spin_lock_bh(&moxa_lock);
881 brd->ready = 1;
882 if (!timer_pending(&moxaTimer))
883 mod_timer(&moxaTimer, jiffies + HZ / 50);
884 spin_unlock_bh(&moxa_lock);
885
886 first_idx = (brd - moxa_boards) * MAX_PORTS_PER_BOARD;
887 for (i = 0; i < brd->numPorts; i++)
888 tty_port_register_device(&brd->ports[i].port, moxaDriver,
889 first_idx + i, dev);
890
891 return 0;
892err_free:
893 for (i = 0; i < MAX_PORTS_PER_BOARD; i++)
894 tty_port_destroy(&brd->ports[i].port);
895 kfree(brd->ports);
896err:
897 return ret;
898}
899
900static void moxa_board_deinit(struct moxa_board_conf *brd)
901{
902 unsigned int a, opened, first_idx;
903
904 mutex_lock(&moxa_openlock);
905 spin_lock_bh(&moxa_lock);
906 brd->ready = 0;
907 spin_unlock_bh(&moxa_lock);
908
909 /* pci hot-un-plug support */
910 for (a = 0; a < brd->numPorts; a++)
911 if (tty_port_initialized(&brd->ports[a].port))
912 tty_port_tty_hangup(&brd->ports[a].port, false);
913
914 for (a = 0; a < MAX_PORTS_PER_BOARD; a++)
915 tty_port_destroy(&brd->ports[a].port);
916
917 while (1) {
918 opened = 0;
919 for (a = 0; a < brd->numPorts; a++)
920 if (tty_port_initialized(&brd->ports[a].port))
921 opened++;
922 mutex_unlock(&moxa_openlock);
923 if (!opened)
924 break;
925 msleep(50);
926 mutex_lock(&moxa_openlock);
927 }
928
929 first_idx = (brd - moxa_boards) * MAX_PORTS_PER_BOARD;
930 for (a = 0; a < brd->numPorts; a++)
931 tty_unregister_device(moxaDriver, first_idx + a);
932
933 iounmap(brd->basemem);
934 brd->basemem = NULL;
935 kfree(brd->ports);
936}
937
938#ifdef CONFIG_PCI
939static int moxa_pci_probe(struct pci_dev *pdev,
940 const struct pci_device_id *ent)
941{
942 struct moxa_board_conf *board;
943 unsigned int i;
944 int board_type = ent->driver_data;
945 int retval;
946
947 retval = pci_enable_device(pdev);
948 if (retval) {
949 dev_err(&pdev->dev, "can't enable pci device\n");
950 goto err;
951 }
952
953 for (i = 0; i < MAX_BOARDS; i++)
954 if (moxa_boards[i].basemem == NULL)
955 break;
956
957 retval = -ENODEV;
958 if (i >= MAX_BOARDS) {
959 dev_warn(&pdev->dev, "more than %u MOXA Intellio family boards "
960 "found. Board is ignored.\n", MAX_BOARDS);
961 goto err;
962 }
963
964 board = &moxa_boards[i];
965
966 retval = pci_request_region(pdev, 2, "moxa-base");
967 if (retval) {
968 dev_err(&pdev->dev, "can't request pci region 2\n");
969 goto err;
970 }
971
972 board->basemem = ioremap_nocache(pci_resource_start(pdev, 2), 0x4000);
973 if (board->basemem == NULL) {
974 dev_err(&pdev->dev, "can't remap io space 2\n");
975 retval = -ENOMEM;
976 goto err_reg;
977 }
978
979 board->boardType = board_type;
980 switch (board_type) {
981 case MOXA_BOARD_C218_ISA:
982 case MOXA_BOARD_C218_PCI:
983 board->numPorts = 8;
984 break;
985
986 case MOXA_BOARD_CP204J:
987 board->numPorts = 4;
988 break;
989 default:
990 board->numPorts = 0;
991 break;
992 }
993 board->busType = MOXA_BUS_TYPE_PCI;
994
995 retval = moxa_init_board(board, &pdev->dev);
996 if (retval)
997 goto err_base;
998
999 pci_set_drvdata(pdev, board);
1000
1001 dev_info(&pdev->dev, "board '%s' ready (%u ports, firmware loaded)\n",
1002 moxa_brdname[board_type - 1], board->numPorts);
1003
1004 return 0;
1005err_base:
1006 iounmap(board->basemem);
1007 board->basemem = NULL;
1008err_reg:
1009 pci_release_region(pdev, 2);
1010err:
1011 return retval;
1012}
1013
1014static void moxa_pci_remove(struct pci_dev *pdev)
1015{
1016 struct moxa_board_conf *brd = pci_get_drvdata(pdev);
1017
1018 moxa_board_deinit(brd);
1019
1020 pci_release_region(pdev, 2);
1021}
1022
1023static struct pci_driver moxa_pci_driver = {
1024 .name = "moxa",
1025 .id_table = moxa_pcibrds,
1026 .probe = moxa_pci_probe,
1027 .remove = moxa_pci_remove
1028};
1029#endif /* CONFIG_PCI */
1030
1031static int __init moxa_init(void)
1032{
1033 unsigned int isabrds = 0;
1034 int retval = 0;
1035 struct moxa_board_conf *brd = moxa_boards;
1036 unsigned int i;
1037
1038 printk(KERN_INFO "MOXA Intellio family driver version %s\n",
1039 MOXA_VERSION);
1040
1041 tty_port_init(&moxa_service_port);
1042
1043 moxaDriver = tty_alloc_driver(MAX_PORTS + 1,
1044 TTY_DRIVER_REAL_RAW |
1045 TTY_DRIVER_DYNAMIC_DEV);
1046 if (IS_ERR(moxaDriver))
1047 return PTR_ERR(moxaDriver);
1048
1049 moxaDriver->name = "ttyMX";
1050 moxaDriver->major = ttymajor;
1051 moxaDriver->minor_start = 0;
1052 moxaDriver->type = TTY_DRIVER_TYPE_SERIAL;
1053 moxaDriver->subtype = SERIAL_TYPE_NORMAL;
1054 moxaDriver->init_termios = tty_std_termios;
1055 moxaDriver->init_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
1056 moxaDriver->init_termios.c_ispeed = 9600;
1057 moxaDriver->init_termios.c_ospeed = 9600;
1058 tty_set_operations(moxaDriver, &moxa_ops);
1059 /* Having one more port only for ioctls is ugly */
1060 tty_port_link_device(&moxa_service_port, moxaDriver, MAX_PORTS);
1061
1062 if (tty_register_driver(moxaDriver)) {
1063 printk(KERN_ERR "can't register MOXA Smartio tty driver!\n");
1064 put_tty_driver(moxaDriver);
1065 return -1;
1066 }
1067
1068 /* Find the boards defined from module args. */
1069
1070 for (i = 0; i < MAX_BOARDS; i++) {
1071 if (!baseaddr[i])
1072 break;
1073 if (type[i] == MOXA_BOARD_C218_ISA ||
1074 type[i] == MOXA_BOARD_C320_ISA) {
1075 pr_debug("Moxa board %2d: %s board(baseAddr=%lx)\n",
1076 isabrds + 1, moxa_brdname[type[i] - 1],
1077 baseaddr[i]);
1078 brd->boardType = type[i];
1079 brd->numPorts = type[i] == MOXA_BOARD_C218_ISA ? 8 :
1080 numports[i];
1081 brd->busType = MOXA_BUS_TYPE_ISA;
1082 brd->basemem = ioremap_nocache(baseaddr[i], 0x4000);
1083 if (!brd->basemem) {
1084 printk(KERN_ERR "MOXA: can't remap %lx\n",
1085 baseaddr[i]);
1086 continue;
1087 }
1088 if (moxa_init_board(brd, NULL)) {
1089 iounmap(brd->basemem);
1090 brd->basemem = NULL;
1091 continue;
1092 }
1093
1094 printk(KERN_INFO "MOXA isa board found at 0x%.8lx and "
1095 "ready (%u ports, firmware loaded)\n",
1096 baseaddr[i], brd->numPorts);
1097
1098 brd++;
1099 isabrds++;
1100 }
1101 }
1102
1103#ifdef CONFIG_PCI
1104 retval = pci_register_driver(&moxa_pci_driver);
1105 if (retval) {
1106 printk(KERN_ERR "Can't register MOXA pci driver!\n");
1107 if (isabrds)
1108 retval = 0;
1109 }
1110#endif
1111
1112 return retval;
1113}
1114
1115static void __exit moxa_exit(void)
1116{
1117 unsigned int i;
1118
1119#ifdef CONFIG_PCI
1120 pci_unregister_driver(&moxa_pci_driver);
1121#endif
1122
1123 for (i = 0; i < MAX_BOARDS; i++) /* ISA boards */
1124 if (moxa_boards[i].ready)
1125 moxa_board_deinit(&moxa_boards[i]);
1126
1127 del_timer_sync(&moxaTimer);
1128
1129 if (tty_unregister_driver(moxaDriver))
1130 printk(KERN_ERR "Couldn't unregister MOXA Intellio family "
1131 "serial driver\n");
1132 put_tty_driver(moxaDriver);
1133}
1134
1135module_init(moxa_init);
1136module_exit(moxa_exit);
1137
1138static void moxa_shutdown(struct tty_port *port)
1139{
1140 struct moxa_port *ch = container_of(port, struct moxa_port, port);
1141 MoxaPortDisable(ch);
1142 MoxaPortFlushData(ch, 2);
1143}
1144
1145static int moxa_carrier_raised(struct tty_port *port)
1146{
1147 struct moxa_port *ch = container_of(port, struct moxa_port, port);
1148 int dcd;
1149
1150 spin_lock_irq(&port->lock);
1151 dcd = ch->DCDState;
1152 spin_unlock_irq(&port->lock);
1153 return dcd;
1154}
1155
1156static void moxa_dtr_rts(struct tty_port *port, int onoff)
1157{
1158 struct moxa_port *ch = container_of(port, struct moxa_port, port);
1159 MoxaPortLineCtrl(ch, onoff, onoff);
1160}
1161
1162
1163static int moxa_open(struct tty_struct *tty, struct file *filp)
1164{
1165 struct moxa_board_conf *brd;
1166 struct moxa_port *ch;
1167 int port;
1168
1169 port = tty->index;
1170 if (port == MAX_PORTS) {
1171 return capable(CAP_SYS_ADMIN) ? 0 : -EPERM;
1172 }
1173 if (mutex_lock_interruptible(&moxa_openlock))
1174 return -ERESTARTSYS;
1175 brd = &moxa_boards[port / MAX_PORTS_PER_BOARD];
1176 if (!brd->ready) {
1177 mutex_unlock(&moxa_openlock);
1178 return -ENODEV;
1179 }
1180
1181 if (port % MAX_PORTS_PER_BOARD >= brd->numPorts) {
1182 mutex_unlock(&moxa_openlock);
1183 return -ENODEV;
1184 }
1185
1186 ch = &brd->ports[port % MAX_PORTS_PER_BOARD];
1187 ch->port.count++;
1188 tty->driver_data = ch;
1189 tty_port_tty_set(&ch->port, tty);
1190 mutex_lock(&ch->port.mutex);
1191 if (!tty_port_initialized(&ch->port)) {
1192 ch->statusflags = 0;
1193 moxa_set_tty_param(tty, &tty->termios);
1194 MoxaPortLineCtrl(ch, 1, 1);
1195 MoxaPortEnable(ch);
1196 MoxaSetFifo(ch, ch->type == PORT_16550A);
1197 tty_port_set_initialized(&ch->port, 1);
1198 }
1199 mutex_unlock(&ch->port.mutex);
1200 mutex_unlock(&moxa_openlock);
1201
1202 return tty_port_block_til_ready(&ch->port, tty, filp);
1203}
1204
1205static void moxa_close(struct tty_struct *tty, struct file *filp)
1206{
1207 struct moxa_port *ch = tty->driver_data;
1208 ch->cflag = tty->termios.c_cflag;
1209 tty_port_close(&ch->port, tty, filp);
1210}
1211
1212static int moxa_write(struct tty_struct *tty,
1213 const unsigned char *buf, int count)
1214{
1215 struct moxa_port *ch = tty->driver_data;
1216 unsigned long flags;
1217 int len;
1218
1219 if (ch == NULL)
1220 return 0;
1221
1222 spin_lock_irqsave(&moxa_lock, flags);
1223 len = MoxaPortWriteData(tty, buf, count);
1224 spin_unlock_irqrestore(&moxa_lock, flags);
1225
1226 set_bit(LOWWAIT, &ch->statusflags);
1227 return len;
1228}
1229
1230static int moxa_write_room(struct tty_struct *tty)
1231{
1232 struct moxa_port *ch;
1233
1234 if (tty->stopped)
1235 return 0;
1236 ch = tty->driver_data;
1237 if (ch == NULL)
1238 return 0;
1239 return MoxaPortTxFree(ch);
1240}
1241
1242static void moxa_flush_buffer(struct tty_struct *tty)
1243{
1244 struct moxa_port *ch = tty->driver_data;
1245
1246 if (ch == NULL)
1247 return;
1248 MoxaPortFlushData(ch, 1);
1249 tty_wakeup(tty);
1250}
1251
1252static int moxa_chars_in_buffer(struct tty_struct *tty)
1253{
1254 struct moxa_port *ch = tty->driver_data;
1255 int chars;
1256
1257 chars = MoxaPortTxQueue(ch);
1258 if (chars)
1259 /*
1260 * Make it possible to wakeup anything waiting for output
1261 * in tty_ioctl.c, etc.
1262 */
1263 set_bit(EMPTYWAIT, &ch->statusflags);
1264 return chars;
1265}
1266
1267static int moxa_tiocmget(struct tty_struct *tty)
1268{
1269 struct moxa_port *ch = tty->driver_data;
1270 int flag = 0, dtr, rts;
1271
1272 MoxaPortGetLineOut(ch, &dtr, &rts);
1273 if (dtr)
1274 flag |= TIOCM_DTR;
1275 if (rts)
1276 flag |= TIOCM_RTS;
1277 dtr = MoxaPortLineStatus(ch);
1278 if (dtr & 1)
1279 flag |= TIOCM_CTS;
1280 if (dtr & 2)
1281 flag |= TIOCM_DSR;
1282 if (dtr & 4)
1283 flag |= TIOCM_CD;
1284 return flag;
1285}
1286
1287static int moxa_tiocmset(struct tty_struct *tty,
1288 unsigned int set, unsigned int clear)
1289{
1290 struct moxa_port *ch;
1291 int dtr, rts;
1292
1293 mutex_lock(&moxa_openlock);
1294 ch = tty->driver_data;
1295 if (!ch) {
1296 mutex_unlock(&moxa_openlock);
1297 return -EINVAL;
1298 }
1299
1300 MoxaPortGetLineOut(ch, &dtr, &rts);
1301 if (set & TIOCM_RTS)
1302 rts = 1;
1303 if (set & TIOCM_DTR)
1304 dtr = 1;
1305 if (clear & TIOCM_RTS)
1306 rts = 0;
1307 if (clear & TIOCM_DTR)
1308 dtr = 0;
1309 MoxaPortLineCtrl(ch, dtr, rts);
1310 mutex_unlock(&moxa_openlock);
1311 return 0;
1312}
1313
1314static void moxa_set_termios(struct tty_struct *tty,
1315 struct ktermios *old_termios)
1316{
1317 struct moxa_port *ch = tty->driver_data;
1318
1319 if (ch == NULL)
1320 return;
1321 moxa_set_tty_param(tty, old_termios);
1322 if (!(old_termios->c_cflag & CLOCAL) && C_CLOCAL(tty))
1323 wake_up_interruptible(&ch->port.open_wait);
1324}
1325
1326static void moxa_stop(struct tty_struct *tty)
1327{
1328 struct moxa_port *ch = tty->driver_data;
1329
1330 if (ch == NULL)
1331 return;
1332 MoxaPortTxDisable(ch);
1333 set_bit(TXSTOPPED, &ch->statusflags);
1334}
1335
1336
1337static void moxa_start(struct tty_struct *tty)
1338{
1339 struct moxa_port *ch = tty->driver_data;
1340
1341 if (ch == NULL)
1342 return;
1343
1344 if (!test_bit(TXSTOPPED, &ch->statusflags))
1345 return;
1346
1347 MoxaPortTxEnable(ch);
1348 clear_bit(TXSTOPPED, &ch->statusflags);
1349}
1350
1351static void moxa_hangup(struct tty_struct *tty)
1352{
1353 struct moxa_port *ch = tty->driver_data;
1354 tty_port_hangup(&ch->port);
1355}
1356
1357static void moxa_new_dcdstate(struct moxa_port *p, u8 dcd)
1358{
1359 unsigned long flags;
1360 dcd = !!dcd;
1361
1362 spin_lock_irqsave(&p->port.lock, flags);
1363 if (dcd != p->DCDState) {
1364 p->DCDState = dcd;
1365 spin_unlock_irqrestore(&p->port.lock, flags);
1366 if (!dcd)
1367 tty_port_tty_hangup(&p->port, true);
1368 }
1369 else
1370 spin_unlock_irqrestore(&p->port.lock, flags);
1371}
1372
1373static int moxa_poll_port(struct moxa_port *p, unsigned int handle,
1374 u16 __iomem *ip)
1375{
1376 struct tty_struct *tty = tty_port_tty_get(&p->port);
1377 void __iomem *ofsAddr;
1378 unsigned int inited = tty_port_initialized(&p->port);
1379 u16 intr;
1380
1381 if (tty) {
1382 if (test_bit(EMPTYWAIT, &p->statusflags) &&
1383 MoxaPortTxQueue(p) == 0) {
1384 clear_bit(EMPTYWAIT, &p->statusflags);
1385 tty_wakeup(tty);
1386 }
1387 if (test_bit(LOWWAIT, &p->statusflags) && !tty->stopped &&
1388 MoxaPortTxQueue(p) <= WAKEUP_CHARS) {
1389 clear_bit(LOWWAIT, &p->statusflags);
1390 tty_wakeup(tty);
1391 }
1392
1393 if (inited && !tty_throttled(tty) &&
1394 MoxaPortRxQueue(p) > 0) { /* RX */
1395 MoxaPortReadData(p);
1396 tty_schedule_flip(&p->port);
1397 }
1398 } else {
1399 clear_bit(EMPTYWAIT, &p->statusflags);
1400 MoxaPortFlushData(p, 0); /* flush RX */
1401 }
1402
1403 if (!handle) /* nothing else to do */
1404 goto put;
1405
1406 intr = readw(ip); /* port irq status */
1407 if (intr == 0)
1408 goto put;
1409
1410 writew(0, ip); /* ACK port */
1411 ofsAddr = p->tableAddr;
1412 if (intr & IntrTx) /* disable tx intr */
1413 writew(readw(ofsAddr + HostStat) & ~WakeupTx,
1414 ofsAddr + HostStat);
1415
1416 if (!inited)
1417 goto put;
1418
1419 if (tty && (intr & IntrBreak) && !I_IGNBRK(tty)) { /* BREAK */
1420 tty_insert_flip_char(&p->port, 0, TTY_BREAK);
1421 tty_schedule_flip(&p->port);
1422 }
1423
1424 if (intr & IntrLine)
1425 moxa_new_dcdstate(p, readb(ofsAddr + FlagStat) & DCD_state);
1426put:
1427 tty_kref_put(tty);
1428
1429 return 0;
1430}
1431
1432static void moxa_poll(struct timer_list *unused)
1433{
1434 struct moxa_board_conf *brd;
1435 u16 __iomem *ip;
1436 unsigned int card, port, served = 0;
1437
1438 spin_lock(&moxa_lock);
1439 for (card = 0; card < MAX_BOARDS; card++) {
1440 brd = &moxa_boards[card];
1441 if (!brd->ready)
1442 continue;
1443
1444 served++;
1445
1446 ip = NULL;
1447 if (readb(brd->intPend) == 0xff)
1448 ip = brd->intTable + readb(brd->intNdx);
1449
1450 for (port = 0; port < brd->numPorts; port++)
1451 moxa_poll_port(&brd->ports[port], !!ip, ip + port);
1452
1453 if (ip)
1454 writeb(0, brd->intPend); /* ACK */
1455
1456 if (moxaLowWaterChk) {
1457 struct moxa_port *p = brd->ports;
1458 for (port = 0; port < brd->numPorts; port++, p++)
1459 if (p->lowChkFlag) {
1460 p->lowChkFlag = 0;
1461 moxa_low_water_check(p->tableAddr);
1462 }
1463 }
1464 }
1465 moxaLowWaterChk = 0;
1466
1467 if (served)
1468 mod_timer(&moxaTimer, jiffies + HZ / 50);
1469 spin_unlock(&moxa_lock);
1470}
1471
1472/******************************************************************************/
1473
1474static void moxa_set_tty_param(struct tty_struct *tty, struct ktermios *old_termios)
1475{
1476 register struct ktermios *ts = &tty->termios;
1477 struct moxa_port *ch = tty->driver_data;
1478 int rts, cts, txflow, rxflow, xany, baud;
1479
1480 rts = cts = txflow = rxflow = xany = 0;
1481 if (ts->c_cflag & CRTSCTS)
1482 rts = cts = 1;
1483 if (ts->c_iflag & IXON)
1484 txflow = 1;
1485 if (ts->c_iflag & IXOFF)
1486 rxflow = 1;
1487 if (ts->c_iflag & IXANY)
1488 xany = 1;
1489
1490 MoxaPortFlowCtrl(ch, rts, cts, txflow, rxflow, xany);
1491 baud = MoxaPortSetTermio(ch, ts, tty_get_baud_rate(tty));
1492 if (baud == -1)
1493 baud = tty_termios_baud_rate(old_termios);
1494 /* Not put the baud rate into the termios data */
1495 tty_encode_baud_rate(tty, baud, baud);
1496}
1497
1498/*****************************************************************************
1499 * Driver level functions: *
1500 *****************************************************************************/
1501
1502static void MoxaPortFlushData(struct moxa_port *port, int mode)
1503{
1504 void __iomem *ofsAddr;
1505 if (mode < 0 || mode > 2)
1506 return;
1507 ofsAddr = port->tableAddr;
1508 moxafunc(ofsAddr, FC_FlushQueue, mode);
1509 if (mode != 1) {
1510 port->lowChkFlag = 0;
1511 moxa_low_water_check(ofsAddr);
1512 }
1513}
1514
1515/*
1516 * Moxa Port Number Description:
1517 *
1518 * MOXA serial driver supports up to 4 MOXA-C218/C320 boards. And,
1519 * the port number using in MOXA driver functions will be 0 to 31 for
1520 * first MOXA board, 32 to 63 for second, 64 to 95 for third and 96
1521 * to 127 for fourth. For example, if you setup three MOXA boards,
1522 * first board is C218, second board is C320-16 and third board is
1523 * C320-32. The port number of first board (C218 - 8 ports) is from
1524 * 0 to 7. The port number of second board (C320 - 16 ports) is form
1525 * 32 to 47. The port number of third board (C320 - 32 ports) is from
1526 * 64 to 95. And those port numbers form 8 to 31, 48 to 63 and 96 to
1527 * 127 will be invalid.
1528 *
1529 *
1530 * Moxa Functions Description:
1531 *
1532 * Function 1: Driver initialization routine, this routine must be
1533 * called when initialized driver.
1534 * Syntax:
1535 * void MoxaDriverInit();
1536 *
1537 *
1538 * Function 2: Moxa driver private IOCTL command processing.
1539 * Syntax:
1540 * int MoxaDriverIoctl(unsigned int cmd, unsigned long arg, int port);
1541 *
1542 * unsigned int cmd : IOCTL command
1543 * unsigned long arg : IOCTL argument
1544 * int port : port number (0 - 127)
1545 *
1546 * return: 0 (OK)
1547 * -EINVAL
1548 * -ENOIOCTLCMD
1549 *
1550 *
1551 * Function 6: Enable this port to start Tx/Rx data.
1552 * Syntax:
1553 * void MoxaPortEnable(int port);
1554 * int port : port number (0 - 127)
1555 *
1556 *
1557 * Function 7: Disable this port
1558 * Syntax:
1559 * void MoxaPortDisable(int port);
1560 * int port : port number (0 - 127)
1561 *
1562 *
1563 * Function 10: Setting baud rate of this port.
1564 * Syntax:
1565 * speed_t MoxaPortSetBaud(int port, speed_t baud);
1566 * int port : port number (0 - 127)
1567 * long baud : baud rate (50 - 115200)
1568 *
1569 * return: 0 : this port is invalid or baud < 50
1570 * 50 - 115200 : the real baud rate set to the port, if
1571 * the argument baud is large than maximun
1572 * available baud rate, the real setting
1573 * baud rate will be the maximun baud rate.
1574 *
1575 *
1576 * Function 12: Configure the port.
1577 * Syntax:
1578 * int MoxaPortSetTermio(int port, struct ktermios *termio, speed_t baud);
1579 * int port : port number (0 - 127)
1580 * struct ktermios * termio : termio structure pointer
1581 * speed_t baud : baud rate
1582 *
1583 * return: -1 : this port is invalid or termio == NULL
1584 * 0 : setting O.K.
1585 *
1586 *
1587 * Function 13: Get the DTR/RTS state of this port.
1588 * Syntax:
1589 * int MoxaPortGetLineOut(int port, int *dtrState, int *rtsState);
1590 * int port : port number (0 - 127)
1591 * int * dtrState : pointer to INT to receive the current DTR
1592 * state. (if NULL, this function will not
1593 * write to this address)
1594 * int * rtsState : pointer to INT to receive the current RTS
1595 * state. (if NULL, this function will not
1596 * write to this address)
1597 *
1598 * return: -1 : this port is invalid
1599 * 0 : O.K.
1600 *
1601 *
1602 * Function 14: Setting the DTR/RTS output state of this port.
1603 * Syntax:
1604 * void MoxaPortLineCtrl(int port, int dtrState, int rtsState);
1605 * int port : port number (0 - 127)
1606 * int dtrState : DTR output state (0: off, 1: on)
1607 * int rtsState : RTS output state (0: off, 1: on)
1608 *
1609 *
1610 * Function 15: Setting the flow control of this port.
1611 * Syntax:
1612 * void MoxaPortFlowCtrl(int port, int rtsFlow, int ctsFlow, int rxFlow,
1613 * int txFlow,int xany);
1614 * int port : port number (0 - 127)
1615 * int rtsFlow : H/W RTS flow control (0: no, 1: yes)
1616 * int ctsFlow : H/W CTS flow control (0: no, 1: yes)
1617 * int rxFlow : S/W Rx XON/XOFF flow control (0: no, 1: yes)
1618 * int txFlow : S/W Tx XON/XOFF flow control (0: no, 1: yes)
1619 * int xany : S/W XANY flow control (0: no, 1: yes)
1620 *
1621 *
1622 * Function 16: Get ths line status of this port
1623 * Syntax:
1624 * int MoxaPortLineStatus(int port);
1625 * int port : port number (0 - 127)
1626 *
1627 * return: Bit 0 - CTS state (0: off, 1: on)
1628 * Bit 1 - DSR state (0: off, 1: on)
1629 * Bit 2 - DCD state (0: off, 1: on)
1630 *
1631 *
1632 * Function 19: Flush the Rx/Tx buffer data of this port.
1633 * Syntax:
1634 * void MoxaPortFlushData(int port, int mode);
1635 * int port : port number (0 - 127)
1636 * int mode
1637 * 0 : flush the Rx buffer
1638 * 1 : flush the Tx buffer
1639 * 2 : flush the Rx and Tx buffer
1640 *
1641 *
1642 * Function 20: Write data.
1643 * Syntax:
1644 * int MoxaPortWriteData(int port, unsigned char * buffer, int length);
1645 * int port : port number (0 - 127)
1646 * unsigned char * buffer : pointer to write data buffer.
1647 * int length : write data length
1648 *
1649 * return: 0 - length : real write data length
1650 *
1651 *
1652 * Function 21: Read data.
1653 * Syntax:
1654 * int MoxaPortReadData(int port, struct tty_struct *tty);
1655 * int port : port number (0 - 127)
1656 * struct tty_struct *tty : tty for data
1657 *
1658 * return: 0 - length : real read data length
1659 *
1660 *
1661 * Function 24: Get the Tx buffer current queued data bytes
1662 * Syntax:
1663 * int MoxaPortTxQueue(int port);
1664 * int port : port number (0 - 127)
1665 *
1666 * return: .. : Tx buffer current queued data bytes
1667 *
1668 *
1669 * Function 25: Get the Tx buffer current free space
1670 * Syntax:
1671 * int MoxaPortTxFree(int port);
1672 * int port : port number (0 - 127)
1673 *
1674 * return: .. : Tx buffer current free space
1675 *
1676 *
1677 * Function 26: Get the Rx buffer current queued data bytes
1678 * Syntax:
1679 * int MoxaPortRxQueue(int port);
1680 * int port : port number (0 - 127)
1681 *
1682 * return: .. : Rx buffer current queued data bytes
1683 *
1684 *
1685 * Function 28: Disable port data transmission.
1686 * Syntax:
1687 * void MoxaPortTxDisable(int port);
1688 * int port : port number (0 - 127)
1689 *
1690 *
1691 * Function 29: Enable port data transmission.
1692 * Syntax:
1693 * void MoxaPortTxEnable(int port);
1694 * int port : port number (0 - 127)
1695 *
1696 *
1697 * Function 31: Get the received BREAK signal count and reset it.
1698 * Syntax:
1699 * int MoxaPortResetBrkCnt(int port);
1700 * int port : port number (0 - 127)
1701 *
1702 * return: 0 - .. : BREAK signal count
1703 *
1704 *
1705 */
1706
1707static void MoxaPortEnable(struct moxa_port *port)
1708{
1709 void __iomem *ofsAddr;
1710 u16 lowwater = 512;
1711
1712 ofsAddr = port->tableAddr;
1713 writew(lowwater, ofsAddr + Low_water);
1714 if (MOXA_IS_320(port->board))
1715 moxafunc(ofsAddr, FC_SetBreakIrq, 0);
1716 else
1717 writew(readw(ofsAddr + HostStat) | WakeupBreak,
1718 ofsAddr + HostStat);
1719
1720 moxafunc(ofsAddr, FC_SetLineIrq, Magic_code);
1721 moxafunc(ofsAddr, FC_FlushQueue, 2);
1722
1723 moxafunc(ofsAddr, FC_EnableCH, Magic_code);
1724 MoxaPortLineStatus(port);
1725}
1726
1727static void MoxaPortDisable(struct moxa_port *port)
1728{
1729 void __iomem *ofsAddr = port->tableAddr;
1730
1731 moxafunc(ofsAddr, FC_SetFlowCtl, 0); /* disable flow control */
1732 moxafunc(ofsAddr, FC_ClrLineIrq, Magic_code);
1733 writew(0, ofsAddr + HostStat);
1734 moxafunc(ofsAddr, FC_DisableCH, Magic_code);
1735}
1736
1737static speed_t MoxaPortSetBaud(struct moxa_port *port, speed_t baud)
1738{
1739 void __iomem *ofsAddr = port->tableAddr;
1740 unsigned int clock, val;
1741 speed_t max;
1742
1743 max = MOXA_IS_320(port->board) ? 460800 : 921600;
1744 if (baud < 50)
1745 return 0;
1746 if (baud > max)
1747 baud = max;
1748 clock = 921600;
1749 val = clock / baud;
1750 moxafunc(ofsAddr, FC_SetBaud, val);
1751 baud = clock / val;
1752 return baud;
1753}
1754
1755static int MoxaPortSetTermio(struct moxa_port *port, struct ktermios *termio,
1756 speed_t baud)
1757{
1758 void __iomem *ofsAddr;
1759 tcflag_t mode = 0;
1760
1761 ofsAddr = port->tableAddr;
1762
1763 mode = termio->c_cflag & CSIZE;
1764 if (mode == CS5)
1765 mode = MX_CS5;
1766 else if (mode == CS6)
1767 mode = MX_CS6;
1768 else if (mode == CS7)
1769 mode = MX_CS7;
1770 else if (mode == CS8)
1771 mode = MX_CS8;
1772
1773 if (termio->c_cflag & CSTOPB) {
1774 if (mode == MX_CS5)
1775 mode |= MX_STOP15;
1776 else
1777 mode |= MX_STOP2;
1778 } else
1779 mode |= MX_STOP1;
1780
1781 if (termio->c_cflag & PARENB) {
1782 if (termio->c_cflag & PARODD) {
1783 if (termio->c_cflag & CMSPAR)
1784 mode |= MX_PARMARK;
1785 else
1786 mode |= MX_PARODD;
1787 } else {
1788 if (termio->c_cflag & CMSPAR)
1789 mode |= MX_PARSPACE;
1790 else
1791 mode |= MX_PAREVEN;
1792 }
1793 } else
1794 mode |= MX_PARNONE;
1795
1796 moxafunc(ofsAddr, FC_SetDataMode, (u16)mode);
1797
1798 if (MOXA_IS_320(port->board) && baud >= 921600)
1799 return -1;
1800
1801 baud = MoxaPortSetBaud(port, baud);
1802
1803 if (termio->c_iflag & (IXON | IXOFF | IXANY)) {
1804 spin_lock_irq(&moxafunc_lock);
1805 writeb(termio->c_cc[VSTART], ofsAddr + FuncArg);
1806 writeb(termio->c_cc[VSTOP], ofsAddr + FuncArg1);
1807 writeb(FC_SetXonXoff, ofsAddr + FuncCode);
1808 moxa_wait_finish(ofsAddr);
1809 spin_unlock_irq(&moxafunc_lock);
1810
1811 }
1812 return baud;
1813}
1814
1815static int MoxaPortGetLineOut(struct moxa_port *port, int *dtrState,
1816 int *rtsState)
1817{
1818 if (dtrState)
1819 *dtrState = !!(port->lineCtrl & DTR_ON);
1820 if (rtsState)
1821 *rtsState = !!(port->lineCtrl & RTS_ON);
1822
1823 return 0;
1824}
1825
1826static void MoxaPortLineCtrl(struct moxa_port *port, int dtr, int rts)
1827{
1828 u8 mode = 0;
1829
1830 if (dtr)
1831 mode |= DTR_ON;
1832 if (rts)
1833 mode |= RTS_ON;
1834 port->lineCtrl = mode;
1835 moxafunc(port->tableAddr, FC_LineControl, mode);
1836}
1837
1838static void MoxaPortFlowCtrl(struct moxa_port *port, int rts, int cts,
1839 int txflow, int rxflow, int txany)
1840{
1841 int mode = 0;
1842
1843 if (rts)
1844 mode |= RTS_FlowCtl;
1845 if (cts)
1846 mode |= CTS_FlowCtl;
1847 if (txflow)
1848 mode |= Tx_FlowCtl;
1849 if (rxflow)
1850 mode |= Rx_FlowCtl;
1851 if (txany)
1852 mode |= IXM_IXANY;
1853 moxafunc(port->tableAddr, FC_SetFlowCtl, mode);
1854}
1855
1856static int MoxaPortLineStatus(struct moxa_port *port)
1857{
1858 void __iomem *ofsAddr;
1859 int val;
1860
1861 ofsAddr = port->tableAddr;
1862 if (MOXA_IS_320(port->board))
1863 val = moxafuncret(ofsAddr, FC_LineStatus, 0);
1864 else
1865 val = readw(ofsAddr + FlagStat) >> 4;
1866 val &= 0x0B;
1867 if (val & 8)
1868 val |= 4;
1869 moxa_new_dcdstate(port, val & 8);
1870 val &= 7;
1871 return val;
1872}
1873
1874static int MoxaPortWriteData(struct tty_struct *tty,
1875 const unsigned char *buffer, int len)
1876{
1877 struct moxa_port *port = tty->driver_data;
1878 void __iomem *baseAddr, *ofsAddr, *ofs;
1879 unsigned int c, total;
1880 u16 head, tail, tx_mask, spage, epage;
1881 u16 pageno, pageofs, bufhead;
1882
1883 ofsAddr = port->tableAddr;
1884 baseAddr = port->board->basemem;
1885 tx_mask = readw(ofsAddr + TX_mask);
1886 spage = readw(ofsAddr + Page_txb);
1887 epage = readw(ofsAddr + EndPage_txb);
1888 tail = readw(ofsAddr + TXwptr);
1889 head = readw(ofsAddr + TXrptr);
1890 c = (head > tail) ? (head - tail - 1) : (head - tail + tx_mask);
1891 if (c > len)
1892 c = len;
1893 moxaLog.txcnt[port->port.tty->index] += c;
1894 total = c;
1895 if (spage == epage) {
1896 bufhead = readw(ofsAddr + Ofs_txb);
1897 writew(spage, baseAddr + Control_reg);
1898 while (c > 0) {
1899 if (head > tail)
1900 len = head - tail - 1;
1901 else
1902 len = tx_mask + 1 - tail;
1903 len = (c > len) ? len : c;
1904 ofs = baseAddr + DynPage_addr + bufhead + tail;
1905 memcpy_toio(ofs, buffer, len);
1906 buffer += len;
1907 tail = (tail + len) & tx_mask;
1908 c -= len;
1909 }
1910 } else {
1911 pageno = spage + (tail >> 13);
1912 pageofs = tail & Page_mask;
1913 while (c > 0) {
1914 len = Page_size - pageofs;
1915 if (len > c)
1916 len = c;
1917 writeb(pageno, baseAddr + Control_reg);
1918 ofs = baseAddr + DynPage_addr + pageofs;
1919 memcpy_toio(ofs, buffer, len);
1920 buffer += len;
1921 if (++pageno == epage)
1922 pageno = spage;
1923 pageofs = 0;
1924 c -= len;
1925 }
1926 tail = (tail + total) & tx_mask;
1927 }
1928 writew(tail, ofsAddr + TXwptr);
1929 writeb(1, ofsAddr + CD180TXirq); /* start to send */
1930 return total;
1931}
1932
1933static int MoxaPortReadData(struct moxa_port *port)
1934{
1935 struct tty_struct *tty = port->port.tty;
1936 unsigned char *dst;
1937 void __iomem *baseAddr, *ofsAddr, *ofs;
1938 unsigned int count, len, total;
1939 u16 tail, rx_mask, spage, epage;
1940 u16 pageno, pageofs, bufhead, head;
1941
1942 ofsAddr = port->tableAddr;
1943 baseAddr = port->board->basemem;
1944 head = readw(ofsAddr + RXrptr);
1945 tail = readw(ofsAddr + RXwptr);
1946 rx_mask = readw(ofsAddr + RX_mask);
1947 spage = readw(ofsAddr + Page_rxb);
1948 epage = readw(ofsAddr + EndPage_rxb);
1949 count = (tail >= head) ? (tail - head) : (tail - head + rx_mask + 1);
1950 if (count == 0)
1951 return 0;
1952
1953 total = count;
1954 moxaLog.rxcnt[tty->index] += total;
1955 if (spage == epage) {
1956 bufhead = readw(ofsAddr + Ofs_rxb);
1957 writew(spage, baseAddr + Control_reg);
1958 while (count > 0) {
1959 ofs = baseAddr + DynPage_addr + bufhead + head;
1960 len = (tail >= head) ? (tail - head) :
1961 (rx_mask + 1 - head);
1962 len = tty_prepare_flip_string(&port->port, &dst,
1963 min(len, count));
1964 memcpy_fromio(dst, ofs, len);
1965 head = (head + len) & rx_mask;
1966 count -= len;
1967 }
1968 } else {
1969 pageno = spage + (head >> 13);
1970 pageofs = head & Page_mask;
1971 while (count > 0) {
1972 writew(pageno, baseAddr + Control_reg);
1973 ofs = baseAddr + DynPage_addr + pageofs;
1974 len = tty_prepare_flip_string(&port->port, &dst,
1975 min(Page_size - pageofs, count));
1976 memcpy_fromio(dst, ofs, len);
1977
1978 count -= len;
1979 pageofs = (pageofs + len) & Page_mask;
1980 if (pageofs == 0 && ++pageno == epage)
1981 pageno = spage;
1982 }
1983 head = (head + total) & rx_mask;
1984 }
1985 writew(head, ofsAddr + RXrptr);
1986 if (readb(ofsAddr + FlagStat) & Xoff_state) {
1987 moxaLowWaterChk = 1;
1988 port->lowChkFlag = 1;
1989 }
1990 return total;
1991}
1992
1993
1994static int MoxaPortTxQueue(struct moxa_port *port)
1995{
1996 void __iomem *ofsAddr = port->tableAddr;
1997 u16 rptr, wptr, mask;
1998
1999 rptr = readw(ofsAddr + TXrptr);
2000 wptr = readw(ofsAddr + TXwptr);
2001 mask = readw(ofsAddr + TX_mask);
2002 return (wptr - rptr) & mask;
2003}
2004
2005static int MoxaPortTxFree(struct moxa_port *port)
2006{
2007 void __iomem *ofsAddr = port->tableAddr;
2008 u16 rptr, wptr, mask;
2009
2010 rptr = readw(ofsAddr + TXrptr);
2011 wptr = readw(ofsAddr + TXwptr);
2012 mask = readw(ofsAddr + TX_mask);
2013 return mask - ((wptr - rptr) & mask);
2014}
2015
2016static int MoxaPortRxQueue(struct moxa_port *port)
2017{
2018 void __iomem *ofsAddr = port->tableAddr;
2019 u16 rptr, wptr, mask;
2020
2021 rptr = readw(ofsAddr + RXrptr);
2022 wptr = readw(ofsAddr + RXwptr);
2023 mask = readw(ofsAddr + RX_mask);
2024 return (wptr - rptr) & mask;
2025}
2026
2027static void MoxaPortTxDisable(struct moxa_port *port)
2028{
2029 moxafunc(port->tableAddr, FC_SetXoffState, Magic_code);
2030}
2031
2032static void MoxaPortTxEnable(struct moxa_port *port)
2033{
2034 moxafunc(port->tableAddr, FC_SetXonState, Magic_code);
2035}
2036
2037static int moxa_get_serial_info(struct moxa_port *info,
2038 struct serial_struct __user *retinfo)
2039{
2040 struct serial_struct tmp = {
2041 .type = info->type,
2042 .line = info->port.tty->index,
2043 .flags = info->port.flags,
2044 .baud_base = 921600,
2045 .close_delay = info->port.close_delay
2046 };
2047 return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0;
2048}
2049
2050
2051static int moxa_set_serial_info(struct moxa_port *info,
2052 struct serial_struct __user *new_info)
2053{
2054 struct serial_struct new_serial;
2055
2056 if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
2057 return -EFAULT;
2058
2059 if (new_serial.irq != 0 || new_serial.port != 0 ||
2060 new_serial.custom_divisor != 0 ||
2061 new_serial.baud_base != 921600)
2062 return -EPERM;
2063
2064 if (!capable(CAP_SYS_ADMIN)) {
2065 if (((new_serial.flags & ~ASYNC_USR_MASK) !=
2066 (info->port.flags & ~ASYNC_USR_MASK)))
2067 return -EPERM;
2068 } else
2069 info->port.close_delay = new_serial.close_delay * HZ / 100;
2070
2071 new_serial.flags = (new_serial.flags & ~ASYNC_FLAGS);
2072 new_serial.flags |= (info->port.flags & ASYNC_FLAGS);
2073
2074 MoxaSetFifo(info, new_serial.type == PORT_16550A);
2075
2076 info->type = new_serial.type;
2077 return 0;
2078}
2079
2080
2081
2082/*****************************************************************************
2083 * Static local functions: *
2084 *****************************************************************************/
2085
2086static void MoxaSetFifo(struct moxa_port *port, int enable)
2087{
2088 void __iomem *ofsAddr = port->tableAddr;
2089
2090 if (!enable) {
2091 moxafunc(ofsAddr, FC_SetRxFIFOTrig, 0);
2092 moxafunc(ofsAddr, FC_SetTxFIFOCnt, 1);
2093 } else {
2094 moxafunc(ofsAddr, FC_SetRxFIFOTrig, 3);
2095 moxafunc(ofsAddr, FC_SetTxFIFOCnt, 16);
2096 }
2097}