Linux Audio

Check our new training course

Loading...
Note: File does not exist in v4.17.
  1/*
  2 * This file function prototypes, data structure
  3 * and  definitions for all the host/station commands
  4 */
  5
  6#ifndef _LBS_HOST_H_
  7#define _LBS_HOST_H_
  8
  9#include "types.h"
 10#include "defs.h"
 11
 12#define DEFAULT_AD_HOC_CHANNEL                  6
 13
 14#define CMD_OPTION_WAITFORRSP                   0x0002
 15
 16/* Host command IDs */
 17
 18/*
 19 * Return command are almost always the same as the host command, but with
 20 * bit 15 set high.  There are a few exceptions, though...
 21 */
 22#define CMD_RET(cmd)                            (0x8000 | cmd)
 23
 24/* Return command convention exceptions: */
 25#define CMD_RET_802_11_ASSOCIATE                0x8012
 26
 27/* Command codes */
 28#define CMD_GET_HW_SPEC                         0x0003
 29#define CMD_EEPROM_UPDATE                       0x0004
 30#define CMD_802_11_RESET                        0x0005
 31#define CMD_802_11_SCAN                         0x0006
 32#define CMD_802_11_GET_LOG                      0x000b
 33#define CMD_MAC_MULTICAST_ADR                   0x0010
 34#define CMD_802_11_AUTHENTICATE                 0x0011
 35#define CMD_802_11_EEPROM_ACCESS                0x0059
 36#define CMD_802_11_ASSOCIATE                    0x0050
 37#define CMD_802_11_SET_WEP                      0x0013
 38#define CMD_802_11_GET_STAT                     0x0014
 39#define CMD_802_3_GET_STAT                      0x0015
 40#define CMD_802_11_SNMP_MIB                     0x0016
 41#define CMD_MAC_REG_MAP                         0x0017
 42#define CMD_BBP_REG_MAP                         0x0018
 43#define CMD_MAC_REG_ACCESS                      0x0019
 44#define CMD_BBP_REG_ACCESS                      0x001a
 45#define CMD_RF_REG_ACCESS                       0x001b
 46#define CMD_802_11_RADIO_CONTROL                0x001c
 47#define CMD_802_11_RF_CHANNEL                   0x001d
 48#define CMD_802_11_RF_TX_POWER                  0x001e
 49#define CMD_802_11_RSSI                         0x001f
 50#define CMD_802_11_RF_ANTENNA                   0x0020
 51#define CMD_802_11_PS_MODE                      0x0021
 52#define CMD_802_11_DATA_RATE                    0x0022
 53#define CMD_RF_REG_MAP                          0x0023
 54#define CMD_802_11_DEAUTHENTICATE               0x0024
 55#define CMD_802_11_REASSOCIATE                  0x0025
 56#define CMD_MAC_CONTROL                         0x0028
 57#define CMD_802_11_AD_HOC_START                 0x002b
 58#define CMD_802_11_AD_HOC_JOIN                  0x002c
 59#define CMD_802_11_QUERY_TKIP_REPLY_CNTRS       0x002e
 60#define CMD_802_11_ENABLE_RSN                   0x002f
 61#define CMD_802_11_SET_AFC                      0x003c
 62#define CMD_802_11_GET_AFC                      0x003d
 63#define CMD_802_11_DEEP_SLEEP                   0x003e
 64#define CMD_802_11_AD_HOC_STOP                  0x0040
 65#define CMD_802_11_HOST_SLEEP_CFG               0x0043
 66#define CMD_802_11_WAKEUP_CONFIRM               0x0044
 67#define CMD_802_11_HOST_SLEEP_ACTIVATE          0x0045
 68#define CMD_802_11_BEACON_STOP                  0x0049
 69#define CMD_802_11_MAC_ADDRESS                  0x004d
 70#define CMD_802_11_LED_GPIO_CTRL                0x004e
 71#define CMD_802_11_EEPROM_ACCESS                0x0059
 72#define CMD_802_11_BAND_CONFIG                  0x0058
 73#define CMD_GSPI_BUS_CONFIG                     0x005a
 74#define CMD_802_11D_DOMAIN_INFO                 0x005b
 75#define CMD_802_11_KEY_MATERIAL                 0x005e
 76#define CMD_802_11_SLEEP_PARAMS                 0x0066
 77#define CMD_802_11_INACTIVITY_TIMEOUT           0x0067
 78#define CMD_802_11_SLEEP_PERIOD                 0x0068
 79#define CMD_802_11_TPC_CFG                      0x0072
 80#define CMD_802_11_PA_CFG                       0x0073
 81#define CMD_802_11_FW_WAKE_METHOD               0x0074
 82#define CMD_802_11_SUBSCRIBE_EVENT              0x0075
 83#define CMD_802_11_RATE_ADAPT_RATESET           0x0076
 84#define CMD_802_11_TX_RATE_QUERY                0x007f
 85#define CMD_GET_TSF                             0x0080
 86#define CMD_BT_ACCESS                           0x0087
 87#define CMD_FWT_ACCESS                          0x0095
 88#define CMD_802_11_MONITOR_MODE                 0x0098
 89#define CMD_MESH_ACCESS                         0x009b
 90#define CMD_MESH_CONFIG_OLD                     0x00a3
 91#define CMD_MESH_CONFIG                         0x00ac
 92#define CMD_SET_BOOT2_VER                       0x00a5
 93#define CMD_FUNC_INIT                           0x00a9
 94#define CMD_FUNC_SHUTDOWN                       0x00aa
 95#define CMD_802_11_BEACON_CTRL                  0x00b0
 96
 97/* For the IEEE Power Save */
 98#define PS_MODE_ACTION_ENTER_PS                 0x0030
 99#define PS_MODE_ACTION_EXIT_PS                  0x0031
100#define PS_MODE_ACTION_SLEEP_CONFIRMED          0x0034
101
102#define CMD_ENABLE_RSN                          0x0001
103#define CMD_DISABLE_RSN                         0x0000
104
105#define CMD_ACT_GET                             0x0000
106#define CMD_ACT_SET                             0x0001
107
108/* Define action or option for CMD_802_11_SET_WEP */
109#define CMD_ACT_ADD                             0x0002
110#define CMD_ACT_REMOVE                          0x0004
111
112#define CMD_TYPE_WEP_40_BIT                     0x01
113#define CMD_TYPE_WEP_104_BIT                    0x02
114
115#define CMD_NUM_OF_WEP_KEYS                     4
116
117#define CMD_WEP_KEY_INDEX_MASK                  0x3fff
118
119/* Define action or option for CMD_802_11_SCAN */
120#define CMD_BSS_TYPE_BSS                        0x0001
121#define CMD_BSS_TYPE_IBSS                       0x0002
122#define CMD_BSS_TYPE_ANY                        0x0003
123
124/* Define action or option for CMD_802_11_SCAN */
125#define CMD_SCAN_TYPE_ACTIVE                    0x0000
126#define CMD_SCAN_TYPE_PASSIVE                   0x0001
127
128#define CMD_SCAN_RADIO_TYPE_BG                  0
129
130#define CMD_SCAN_PROBE_DELAY_TIME               0
131
132/* Define action or option for CMD_MAC_CONTROL */
133#define CMD_ACT_MAC_RX_ON                       0x0001
134#define CMD_ACT_MAC_TX_ON                       0x0002
135#define CMD_ACT_MAC_LOOPBACK_ON                 0x0004
136#define CMD_ACT_MAC_WEP_ENABLE                  0x0008
137#define CMD_ACT_MAC_INT_ENABLE                  0x0010
138#define CMD_ACT_MAC_MULTICAST_ENABLE            0x0020
139#define CMD_ACT_MAC_BROADCAST_ENABLE            0x0040
140#define CMD_ACT_MAC_PROMISCUOUS_ENABLE          0x0080
141#define CMD_ACT_MAC_ALL_MULTICAST_ENABLE        0x0100
142#define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE    0x0400
143
144/* Event flags for CMD_802_11_SUBSCRIBE_EVENT */
145#define CMD_SUBSCRIBE_RSSI_LOW                  0x0001
146#define CMD_SUBSCRIBE_SNR_LOW                   0x0002
147#define CMD_SUBSCRIBE_FAILCOUNT                 0x0004
148#define CMD_SUBSCRIBE_BCNMISS                   0x0008
149#define CMD_SUBSCRIBE_RSSI_HIGH                 0x0010
150#define CMD_SUBSCRIBE_SNR_HIGH                  0x0020
151
152#define RADIO_PREAMBLE_LONG                     0x00
153#define RADIO_PREAMBLE_SHORT                    0x02
154#define RADIO_PREAMBLE_AUTO                     0x04
155
156/* Define action or option for CMD_802_11_RF_CHANNEL */
157#define CMD_OPT_802_11_RF_CHANNEL_GET           0x00
158#define CMD_OPT_802_11_RF_CHANNEL_SET           0x01
159
160/* Define action or option for CMD_802_11_DATA_RATE */
161#define CMD_ACT_SET_TX_AUTO                     0x0000
162#define CMD_ACT_SET_TX_FIX_RATE                 0x0001
163#define CMD_ACT_GET_TX_RATE                     0x0002
164
165/* Options for CMD_802_11_FW_WAKE_METHOD */
166#define CMD_WAKE_METHOD_UNCHANGED               0x0000
167#define CMD_WAKE_METHOD_COMMAND_INT             0x0001
168#define CMD_WAKE_METHOD_GPIO                    0x0002
169
170/* Object IDs for CMD_802_11_SNMP_MIB */
171#define SNMP_MIB_OID_BSS_TYPE                   0x0000
172#define SNMP_MIB_OID_OP_RATE_SET                0x0001
173#define SNMP_MIB_OID_BEACON_PERIOD              0x0002  /* Reserved on v9+ */
174#define SNMP_MIB_OID_DTIM_PERIOD                0x0003  /* Reserved on v9+ */
175#define SNMP_MIB_OID_ASSOC_TIMEOUT              0x0004  /* Reserved on v9+ */
176#define SNMP_MIB_OID_RTS_THRESHOLD              0x0005
177#define SNMP_MIB_OID_SHORT_RETRY_LIMIT          0x0006
178#define SNMP_MIB_OID_LONG_RETRY_LIMIT           0x0007
179#define SNMP_MIB_OID_FRAG_THRESHOLD             0x0008
180#define SNMP_MIB_OID_11D_ENABLE                 0x0009
181#define SNMP_MIB_OID_11H_ENABLE                 0x000A
182
183/* Define action or option for CMD_BT_ACCESS */
184enum cmd_bt_access_opts {
185	/* The bt commands start at 5 instead of 1 because the old dft commands
186	 * are mapped to 1-4.  These old commands are no longer maintained and
187	 * should not be called.
188	 */
189	CMD_ACT_BT_ACCESS_ADD = 5,
190	CMD_ACT_BT_ACCESS_DEL,
191	CMD_ACT_BT_ACCESS_LIST,
192	CMD_ACT_BT_ACCESS_RESET,
193	CMD_ACT_BT_ACCESS_SET_INVERT,
194	CMD_ACT_BT_ACCESS_GET_INVERT
195};
196
197/* Define action or option for CMD_FWT_ACCESS */
198enum cmd_fwt_access_opts {
199	CMD_ACT_FWT_ACCESS_ADD = 1,
200	CMD_ACT_FWT_ACCESS_DEL,
201	CMD_ACT_FWT_ACCESS_LOOKUP,
202	CMD_ACT_FWT_ACCESS_LIST,
203	CMD_ACT_FWT_ACCESS_LIST_ROUTE,
204	CMD_ACT_FWT_ACCESS_LIST_NEIGHBOR,
205	CMD_ACT_FWT_ACCESS_RESET,
206	CMD_ACT_FWT_ACCESS_CLEANUP,
207	CMD_ACT_FWT_ACCESS_TIME,
208};
209
210/* Define action or option for CMD_802_11_HOST_SLEEP_CFG */
211enum cmd_wol_cfg_opts {
212	CMD_ACT_ACTION_NONE = 0,
213	CMD_ACT_SET_WOL_RULE,
214	CMD_ACT_GET_WOL_RULE,
215	CMD_ACT_RESET_WOL_RULE,
216};
217
218/* Define action or option for CMD_MESH_ACCESS */
219enum cmd_mesh_access_opts {
220	CMD_ACT_MESH_GET_TTL = 1,
221	CMD_ACT_MESH_SET_TTL,
222	CMD_ACT_MESH_GET_STATS,
223	CMD_ACT_MESH_GET_ANYCAST,
224	CMD_ACT_MESH_SET_ANYCAST,
225	CMD_ACT_MESH_SET_LINK_COSTS,
226	CMD_ACT_MESH_GET_LINK_COSTS,
227	CMD_ACT_MESH_SET_BCAST_RATE,
228	CMD_ACT_MESH_GET_BCAST_RATE,
229	CMD_ACT_MESH_SET_RREQ_DELAY,
230	CMD_ACT_MESH_GET_RREQ_DELAY,
231	CMD_ACT_MESH_SET_ROUTE_EXP,
232	CMD_ACT_MESH_GET_ROUTE_EXP,
233	CMD_ACT_MESH_SET_AUTOSTART_ENABLED,
234	CMD_ACT_MESH_GET_AUTOSTART_ENABLED,
235	CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT = 17,
236};
237
238/* Define actions and types for CMD_MESH_CONFIG */
239enum cmd_mesh_config_actions {
240	CMD_ACT_MESH_CONFIG_STOP = 0,
241	CMD_ACT_MESH_CONFIG_START,
242	CMD_ACT_MESH_CONFIG_SET,
243	CMD_ACT_MESH_CONFIG_GET,
244};
245
246enum cmd_mesh_config_types {
247	CMD_TYPE_MESH_SET_BOOTFLAG = 1,
248	CMD_TYPE_MESH_SET_BOOTTIME,
249	CMD_TYPE_MESH_SET_DEF_CHANNEL,
250	CMD_TYPE_MESH_SET_MESH_IE,
251	CMD_TYPE_MESH_GET_DEFAULTS,
252	CMD_TYPE_MESH_GET_MESH_IE, /* GET_DEFAULTS is superset of GET_MESHIE */
253};
254
255/* Card Event definition */
256#define MACREG_INT_CODE_TX_PPA_FREE		0
257#define MACREG_INT_CODE_TX_DMA_DONE		1
258#define MACREG_INT_CODE_LINK_LOST_W_SCAN	2
259#define MACREG_INT_CODE_LINK_LOST_NO_SCAN	3
260#define MACREG_INT_CODE_LINK_SENSED		4
261#define MACREG_INT_CODE_CMD_FINISHED		5
262#define MACREG_INT_CODE_MIB_CHANGED		6
263#define MACREG_INT_CODE_INIT_DONE		7
264#define MACREG_INT_CODE_DEAUTHENTICATED		8
265#define MACREG_INT_CODE_DISASSOCIATED		9
266#define MACREG_INT_CODE_PS_AWAKE		10
267#define MACREG_INT_CODE_PS_SLEEP		11
268#define MACREG_INT_CODE_MIC_ERR_MULTICAST	13
269#define MACREG_INT_CODE_MIC_ERR_UNICAST		14
270#define MACREG_INT_CODE_WM_AWAKE		15
271#define MACREG_INT_CODE_DEEP_SLEEP_AWAKE	16
272#define MACREG_INT_CODE_ADHOC_BCN_LOST		17
273#define MACREG_INT_CODE_HOST_AWAKE		18
274#define MACREG_INT_CODE_STOP_TX			19
275#define MACREG_INT_CODE_START_TX		20
276#define MACREG_INT_CODE_CHANNEL_SWITCH		21
277#define MACREG_INT_CODE_MEASUREMENT_RDY		22
278#define MACREG_INT_CODE_WMM_CHANGE		23
279#define MACREG_INT_CODE_BG_SCAN_REPORT		24
280#define MACREG_INT_CODE_RSSI_LOW		25
281#define MACREG_INT_CODE_SNR_LOW			26
282#define MACREG_INT_CODE_MAX_FAIL		27
283#define MACREG_INT_CODE_RSSI_HIGH		28
284#define MACREG_INT_CODE_SNR_HIGH		29
285#define MACREG_INT_CODE_MESH_AUTO_STARTED	35
286#define MACREG_INT_CODE_FIRMWARE_READY		48
287
288
289/* 802.11-related definitions */
290
291/* TxPD descriptor */
292struct txpd {
293	/* union to cope up with later FW revisions */
294	union {
295		/* Current Tx packet status */
296		__le32 tx_status;
297		struct {
298			/* BSS type: client, AP, etc. */
299			u8 bss_type;
300			/* BSS number */
301			u8 bss_num;
302			/* Reserved */
303			__le16 reserved;
304		} bss;
305	} u;
306	/* Tx control */
307	__le32 tx_control;
308	__le32 tx_packet_location;
309	/* Tx packet length */
310	__le16 tx_packet_length;
311	/* First 2 byte of destination MAC address */
312	u8 tx_dest_addr_high[2];
313	/* Last 4 byte of destination MAC address */
314	u8 tx_dest_addr_low[4];
315	/* Pkt Priority */
316	u8 priority;
317	/* Pkt Trasnit Power control */
318	u8 powermgmt;
319	/* Amount of time the packet has been queued (units = 2ms) */
320	u8 pktdelay_2ms;
321	/* reserved */
322	u8 reserved1;
323} __packed;
324
325/* RxPD Descriptor */
326struct rxpd {
327	/* union to cope up with later FW revisions */
328	union {
329		/* Current Rx packet status */
330		__le16 status;
331		struct {
332			/* BSS type: client, AP, etc. */
333			u8 bss_type;
334			/* BSS number */
335			u8 bss_num;
336		} __packed bss;
337	} __packed u;
338
339	/* SNR */
340	u8 snr;
341
342	/* Tx control */
343	u8 rx_control;
344
345	/* Pkt length */
346	__le16 pkt_len;
347
348	/* Noise Floor */
349	u8 nf;
350
351	/* Rx Packet Rate */
352	u8 rx_rate;
353
354	/* Pkt addr */
355	__le32 pkt_ptr;
356
357	/* Next Rx RxPD addr */
358	__le32 next_rxpd_ptr;
359
360	/* Pkt Priority */
361	u8 priority;
362	u8 reserved[3];
363} __packed;
364
365struct cmd_header {
366	__le16 command;
367	__le16 size;
368	__le16 seqnum;
369	__le16 result;
370} __packed;
371
372/* Generic structure to hold all key types. */
373struct enc_key {
374	u16 len;
375	u16 flags;  /* KEY_INFO_* from defs.h */
376	u16 type; /* KEY_TYPE_* from defs.h */
377	u8 key[32];
378};
379
380/* lbs_offset_value */
381struct lbs_offset_value {
382	u32 offset;
383	u32 value;
384} __packed;
385
386#define MAX_11D_TRIPLETS	83
387
388struct mrvl_ie_domain_param_set {
389	struct mrvl_ie_header header;
390
391	u8 country_code[IEEE80211_COUNTRY_STRING_LEN];
392	struct ieee80211_country_ie_triplet triplet[MAX_11D_TRIPLETS];
393} __packed;
394
395struct cmd_ds_802_11d_domain_info {
396	struct cmd_header hdr;
397
398	__le16 action;
399	struct mrvl_ie_domain_param_set domain;
400} __packed;
401
402/*
403 * Define data structure for CMD_GET_HW_SPEC
404 * This structure defines the response for the GET_HW_SPEC command
405 */
406struct cmd_ds_get_hw_spec {
407	struct cmd_header hdr;
408
409	/* HW Interface version number */
410	__le16 hwifversion;
411	/* HW version number */
412	__le16 version;
413	/* Max number of TxPD FW can handle */
414	__le16 nr_txpd;
415	/* Max no of Multicast address */
416	__le16 nr_mcast_adr;
417	/* MAC address */
418	u8 permanentaddr[6];
419
420	/* region Code */
421	__le16 regioncode;
422
423	/* Number of antenna used */
424	__le16 nr_antenna;
425
426	/* FW release number, example 0x01030304 = 2.3.4p1 */
427	__le32 fwrelease;
428
429	/* Base Address of TxPD queue */
430	__le32 wcb_base;
431	/* Read Pointer of RxPd queue */
432	__le32 rxpd_rdptr;
433
434	/* Write Pointer of RxPd queue */
435	__le32 rxpd_wrptr;
436
437	/*FW/HW capability */
438	__le32 fwcapinfo;
439} __packed;
440
441struct cmd_ds_802_11_subscribe_event {
442	struct cmd_header hdr;
443
444	__le16 action;
445	__le16 events;
446
447	/* A TLV to the CMD_802_11_SUBSCRIBE_EVENT command can contain a
448	 * number of TLVs. From the v5.1 manual, those TLVs would add up to
449	 * 40 bytes. However, future firmware might add additional TLVs, so I
450	 * bump this up a bit.
451	 */
452	uint8_t tlv[128];
453} __packed;
454
455/*
456 * This scan handle Country Information IE(802.11d compliant)
457 * Define data structure for CMD_802_11_SCAN
458 */
459struct cmd_ds_802_11_scan {
460	struct cmd_header hdr;
461
462	uint8_t bsstype;
463	uint8_t bssid[ETH_ALEN];
464	uint8_t tlvbuffer[0];
465} __packed;
466
467struct cmd_ds_802_11_scan_rsp {
468	struct cmd_header hdr;
469
470	__le16 bssdescriptsize;
471	uint8_t nr_sets;
472	uint8_t bssdesc_and_tlvbuffer[0];
473} __packed;
474
475struct cmd_ds_802_11_get_log {
476	struct cmd_header hdr;
477
478	__le32 mcasttxframe;
479	__le32 failed;
480	__le32 retry;
481	__le32 multiretry;
482	__le32 framedup;
483	__le32 rtssuccess;
484	__le32 rtsfailure;
485	__le32 ackfailure;
486	__le32 rxfrag;
487	__le32 mcastrxframe;
488	__le32 fcserror;
489	__le32 txframe;
490	__le32 wepundecryptable;
491} __packed;
492
493struct cmd_ds_mac_control {
494	struct cmd_header hdr;
495	__le16 action;
496	u16 reserved;
497} __packed;
498
499struct cmd_ds_mac_multicast_adr {
500	struct cmd_header hdr;
501	__le16 action;
502	__le16 nr_of_adrs;
503	u8 maclist[ETH_ALEN * MRVDRV_MAX_MULTICAST_LIST_SIZE];
504} __packed;
505
506struct cmd_ds_802_11_authenticate {
507	struct cmd_header hdr;
508
509	u8 bssid[ETH_ALEN];
510	u8 authtype;
511	u8 reserved[10];
512} __packed;
513
514struct cmd_ds_802_11_deauthenticate {
515	struct cmd_header hdr;
516
517	u8 macaddr[ETH_ALEN];
518	__le16 reasoncode;
519} __packed;
520
521struct cmd_ds_802_11_associate {
522	struct cmd_header hdr;
523
524	u8 bssid[6];
525	__le16 capability;
526	__le16 listeninterval;
527	__le16 bcnperiod;
528	u8 dtimperiod;
529	u8 iebuf[512];    /* Enough for required and most optional IEs */
530} __packed;
531
532struct cmd_ds_802_11_associate_response {
533	struct cmd_header hdr;
534
535	__le16 capability;
536	__le16 statuscode;
537	__le16 aid;
538	u8 iebuf[512];
539} __packed;
540
541struct cmd_ds_802_11_set_wep {
542	struct cmd_header hdr;
543
544	/* ACT_ADD, ACT_REMOVE or ACT_ENABLE */
545	__le16 action;
546
547	/* key Index selected for Tx */
548	__le16 keyindex;
549
550	/* 40, 128bit or TXWEP */
551	uint8_t keytype[4];
552	uint8_t keymaterial[4][16];
553} __packed;
554
555struct cmd_ds_802_11_snmp_mib {
556	struct cmd_header hdr;
557
558	__le16 action;
559	__le16 oid;
560	__le16 bufsize;
561	u8 value[128];
562} __packed;
563
564struct cmd_ds_reg_access {
565	struct cmd_header hdr;
566
567	__le16 action;
568	__le16 offset;
569	union {
570		u8 bbp_rf;  /* for BBP and RF registers */
571		__le32 mac; /* for MAC registers */
572	} value;
573} __packed;
574
575struct cmd_ds_802_11_radio_control {
576	struct cmd_header hdr;
577
578	__le16 action;
579	__le16 control;
580} __packed;
581
582struct cmd_ds_802_11_beacon_control {
583	struct cmd_header hdr;
584
585	__le16 action;
586	__le16 beacon_enable;
587	__le16 beacon_period;
588} __packed;
589
590struct cmd_ds_802_11_sleep_params {
591	struct cmd_header hdr;
592
593	/* ACT_GET/ACT_SET */
594	__le16 action;
595
596	/* Sleep clock error in ppm */
597	__le16 error;
598
599	/* Wakeup offset in usec */
600	__le16 offset;
601
602	/* Clock stabilization time in usec */
603	__le16 stabletime;
604
605	/* control periodic calibration */
606	uint8_t calcontrol;
607
608	/* control the use of external sleep clock */
609	uint8_t externalsleepclk;
610
611	/* reserved field, should be set to zero */
612	__le16 reserved;
613} __packed;
614
615struct cmd_ds_802_11_rf_channel {
616	struct cmd_header hdr;
617
618	__le16 action;
619	__le16 channel;
620	__le16 rftype;      /* unused */
621	__le16 reserved;    /* unused */
622	u8 channellist[32]; /* unused */
623} __packed;
624
625struct cmd_ds_802_11_rssi {
626	struct cmd_header hdr;
627
628	/*
629	 * request:  number of beacons (N) to average the SNR and NF over
630	 * response: SNR of most recent beacon
631	 */
632	__le16 n_or_snr;
633
634	/*
635	 * The following fields are only set in the response.
636	 * In the request these are reserved and should be set to 0.
637	 */
638	__le16 nf;       /* most recent beacon noise floor */
639	__le16 avg_snr;  /* average SNR weighted by N from request */
640	__le16 avg_nf;   /* average noise floor weighted by N from request */
641} __packed;
642
643struct cmd_ds_802_11_mac_address {
644	struct cmd_header hdr;
645
646	__le16 action;
647	u8 macadd[ETH_ALEN];
648} __packed;
649
650struct cmd_ds_802_11_rf_tx_power {
651	struct cmd_header hdr;
652
653	__le16 action;
654	__le16 curlevel;
655	s8 maxlevel;
656	s8 minlevel;
657} __packed;
658
659/* MONITOR_MODE only exists in OLPC v5 firmware */
660struct cmd_ds_802_11_monitor_mode {
661	struct cmd_header hdr;
662
663	__le16 action;
664	__le16 mode;
665} __packed;
666
667struct cmd_ds_set_boot2_ver {
668	struct cmd_header hdr;
669
670	__le16 action;
671	__le16 version;
672} __packed;
673
674struct cmd_ds_802_11_fw_wake_method {
675	struct cmd_header hdr;
676
677	__le16 action;
678	__le16 method;
679} __packed;
680
681struct cmd_ds_802_11_ps_mode {
682	struct cmd_header hdr;
683
684	__le16 action;
685
686	/*
687	 * Interval for keepalive in PS mode:
688	 * 0x0000 = don't change
689	 * 0x001E = firmware default
690	 * 0xFFFF = disable
691	 */
692	__le16 nullpktinterval;
693
694	/*
695	 * Number of DTIM intervals to wake up for:
696	 * 0 = don't change
697	 * 1 = firmware default
698	 * 5 = max
699	 */
700	__le16 multipledtim;
701
702	__le16 reserved;
703	__le16 locallisteninterval;
704
705	/*
706	 * AdHoc awake period (FW v9+ only):
707	 * 0 = don't change
708	 * 1 = always awake (IEEE standard behavior)
709	 * 2 - 31 = sleep for (n - 1) periods and awake for 1 period
710	 * 32 - 254 = invalid
711	 * 255 = sleep at each ATIM
712	 */
713	__le16 adhoc_awake_period;
714} __packed;
715
716struct cmd_confirm_sleep {
717	struct cmd_header hdr;
718
719	__le16 action;
720	__le16 nullpktinterval;
721	__le16 multipledtim;
722	__le16 reserved;
723	__le16 locallisteninterval;
724} __packed;
725
726struct cmd_ds_802_11_data_rate {
727	struct cmd_header hdr;
728
729	__le16 action;
730	__le16 reserved;
731	u8 rates[MAX_RATES];
732} __packed;
733
734struct cmd_ds_802_11_rate_adapt_rateset {
735	struct cmd_header hdr;
736	__le16 action;
737	__le16 enablehwauto;
738	__le16 bitmap;
739} __packed;
740
741struct cmd_ds_802_11_ad_hoc_start {
742	struct cmd_header hdr;
743
744	u8 ssid[IEEE80211_MAX_SSID_LEN];
745	u8 bsstype;
746	__le16 beaconperiod;
747	u8 dtimperiod;   /* Reserved on v9 and later */
748	struct ieee_ie_ibss_param_set ibss;
749	u8 reserved1[4];
750	struct ieee_ie_ds_param_set ds;
751	u8 reserved2[4];
752	__le16 probedelay;  /* Reserved on v9 and later */
753	__le16 capability;
754	u8 rates[MAX_RATES];
755	u8 tlv_memory_size_pad[100];
756} __packed;
757
758struct cmd_ds_802_11_ad_hoc_result {
759	struct cmd_header hdr;
760
761	u8 pad[3];
762	u8 bssid[ETH_ALEN];
763} __packed;
764
765struct adhoc_bssdesc {
766	u8 bssid[ETH_ALEN];
767	u8 ssid[IEEE80211_MAX_SSID_LEN];
768	u8 type;
769	__le16 beaconperiod;
770	u8 dtimperiod;
771	__le64 timestamp;
772	__le64 localtime;
773	struct ieee_ie_ds_param_set ds;
774	u8 reserved1[4];
775	struct ieee_ie_ibss_param_set ibss;
776	u8 reserved2[4];
777	__le16 capability;
778	u8 rates[MAX_RATES];
779
780	/*
781	 * DO NOT ADD ANY FIELDS TO THIS STRUCTURE. It is used below in the
782	 * Adhoc join command and will cause a binary layout mismatch with
783	 * the firmware
784	 */
785} __packed;
786
787struct cmd_ds_802_11_ad_hoc_join {
788	struct cmd_header hdr;
789
790	struct adhoc_bssdesc bss;
791	__le16 failtimeout;   /* Reserved on v9 and later */
792	__le16 probedelay;    /* Reserved on v9 and later */
793} __packed;
794
795struct cmd_ds_802_11_ad_hoc_stop {
796	struct cmd_header hdr;
797} __packed;
798
799struct cmd_ds_802_11_enable_rsn {
800	struct cmd_header hdr;
801
802	__le16 action;
803	__le16 enable;
804} __packed;
805
806struct MrvlIEtype_keyParamSet {
807	/* type ID */
808	__le16 type;
809
810	/* length of Payload */
811	__le16 length;
812
813	/* type of key: WEP=0, TKIP=1, AES=2 */
814	__le16 keytypeid;
815
816	/* key control Info specific to a keytypeid */
817	__le16 keyinfo;
818
819	/* length of key */
820	__le16 keylen;
821
822	/* key material of size keylen */
823	u8 key[32];
824} __packed;
825
826#define MAX_WOL_RULES 		16
827
828struct host_wol_rule {
829	uint8_t rule_no;
830	uint8_t rule_ops;
831	__le16 sig_offset;
832	__le16 sig_length;
833	__le16 reserve;
834	__be32 sig_mask;
835	__be32 signature;
836} __packed;
837
838struct wol_config {
839	uint8_t action;
840	uint8_t pattern;
841	uint8_t no_rules_in_cmd;
842	uint8_t result;
843	struct host_wol_rule rule[MAX_WOL_RULES];
844} __packed;
845
846struct cmd_ds_host_sleep {
847	struct cmd_header hdr;
848	__le32 criteria;
849	uint8_t gpio;
850	uint16_t gap;
851	struct wol_config wol_conf;
852} __packed;
853
854
855
856struct cmd_ds_802_11_key_material {
857	struct cmd_header hdr;
858
859	__le16 action;
860	struct MrvlIEtype_keyParamSet keyParamSet[2];
861} __packed;
862
863struct cmd_ds_802_11_eeprom_access {
864	struct cmd_header hdr;
865	__le16 action;
866	__le16 offset;
867	__le16 len;
868	/* firmware says it returns a maximum of 20 bytes */
869#define LBS_EEPROM_READ_LEN 20
870	u8 value[LBS_EEPROM_READ_LEN];
871} __packed;
872
873struct cmd_ds_802_11_tpc_cfg {
874	struct cmd_header hdr;
875
876	__le16 action;
877	uint8_t enable;
878	int8_t P0;
879	int8_t P1;
880	int8_t P2;
881	uint8_t usesnr;
882} __packed;
883
884
885struct cmd_ds_802_11_pa_cfg {
886	struct cmd_header hdr;
887
888	__le16 action;
889	uint8_t enable;
890	int8_t P0;
891	int8_t P1;
892	int8_t P2;
893} __packed;
894
895
896struct cmd_ds_802_11_led_ctrl {
897	struct cmd_header hdr;
898
899	__le16 action;
900	__le16 numled;
901	u8 data[256];
902} __packed;
903
904/* Automatic Frequency Control */
905struct cmd_ds_802_11_afc {
906	struct cmd_header hdr;
907
908	__le16 afc_auto;
909	union {
910		struct {
911			__le16 threshold;
912			__le16 period;
913		};
914		struct {
915			__le16 timing_offset; /* signed */
916			__le16 carrier_offset; /* signed */
917		};
918	};
919} __packed;
920
921struct cmd_tx_rate_query {
922	__le16 txrate;
923} __packed;
924
925struct cmd_ds_get_tsf {
926	__le64 tsfvalue;
927} __packed;
928
929struct cmd_ds_bt_access {
930	struct cmd_header hdr;
931
932	__le16 action;
933	__le32 id;
934	u8 addr1[ETH_ALEN];
935	u8 addr2[ETH_ALEN];
936} __packed;
937
938struct cmd_ds_fwt_access {
939	struct cmd_header hdr;
940
941	__le16 action;
942	__le32 id;
943	u8 valid;
944	u8 da[ETH_ALEN];
945	u8 dir;
946	u8 ra[ETH_ALEN];
947	__le32 ssn;
948	__le32 dsn;
949	__le32 metric;
950	u8 rate;
951	u8 hopcount;
952	u8 ttl;
953	__le32 expiration;
954	u8 sleepmode;
955	__le32 snr;
956	__le32 references;
957	u8 prec[ETH_ALEN];
958} __packed;
959
960struct cmd_ds_mesh_config {
961	struct cmd_header hdr;
962
963	__le16 action;
964	__le16 channel;
965	__le16 type;
966	__le16 length;
967	u8 data[128];	/* last position reserved */
968} __packed;
969
970struct cmd_ds_mesh_access {
971	struct cmd_header hdr;
972
973	__le16 action;
974	__le32 data[32];	/* last position reserved */
975} __packed;
976
977/* Number of stats counters returned by the firmware */
978#define MESH_STATS_NUM 8
979#endif