1config IWLEGACY
  2	tristate
  3	select FW_LOADER
  4	select NEW_LEDS
  5	select LEDS_CLASS
  6	select LEDS_TRIGGERS
  7	select MAC80211_LEDS
  8
  9config IWL4965
 10	tristate "Intel Wireless WiFi 4965AGN (iwl4965)"
 11	depends on PCI && MAC80211
 12	select IWLEGACY
 13	---help---
 14	  This option enables support for
 15
 16	  Select to build the driver supporting the:
 17
 18	  Intel Wireless WiFi Link 4965AGN
 19
 20	  This driver uses the kernel's mac80211 subsystem.
 21
 22	  In order to use this driver, you will need a microcode (uCode)
 23	  image for it. You can obtain the microcode from:
 24
 25	          <http://intellinuxwireless.org/>.
 26
 27	  The microcode is typically installed in /lib/firmware. You can
 28	  look in the hotplug script /etc/hotplug/firmware.agent to
 29	  determine which directory FIRMWARE_DIR is set to when the script
 30	  runs.
 31
 32	  If you want to compile the driver as a module ( = code which can be
 33	  inserted in and removed from the running kernel whenever you want),
 34	  say M here and read <file:Documentation/kbuild/modules.txt>.  The
 35	  module will be called iwl4965.
 36
 37config IWL3945
 38	tristate "Intel PRO/Wireless 3945ABG/BG Network Connection (iwl3945)"
 39	depends on PCI && MAC80211
 40	select IWLEGACY
 41	---help---
 42	  Select to build the driver supporting the:
 43
 44	  Intel PRO/Wireless 3945ABG/BG Network Connection
 45
 46	  This driver uses the kernel's mac80211 subsystem.
 47
 48	  In order to use this driver, you will need a microcode (uCode)
 49	  image for it. You can obtain the microcode from:
 50
 51	          <http://intellinuxwireless.org/>.
 52
 53	  The microcode is typically installed in /lib/firmware. You can
 54	  look in the hotplug script /etc/hotplug/firmware.agent to
 55	  determine which directory FIRMWARE_DIR is set to when the script
 56	  runs.
 57
 58	  If you want to compile the driver as a module ( = code which can be
 59	  inserted in and removed from the running kernel whenever you want),
 60	  say M here and read <file:Documentation/kbuild/modules.txt>.  The
 61	  module will be called iwl3945.
 62
 63menu "iwl3945 / iwl4965 Debugging Options"
 64	depends on IWLEGACY
 65
 66config IWLEGACY_DEBUG
 67	bool "Enable full debugging output in iwlegacy (iwl 3945/4965) drivers"
 68	depends on IWLEGACY
 69	---help---
 70	  This option will enable debug tracing output for the iwlegacy
 71	  drivers.
 72
 73	  This will result in the kernel module being ~100k larger.  You can
 74	  control which debug output is sent to the kernel log by setting the
 75	  value in
 76
 77		/sys/class/net/wlan0/device/debug_level
 78
 79	  This entry will only exist if this option is enabled.
 80
 81	  To set a value, simply echo an 8-byte hex value to the same file:
 82
 83		  % echo 0x43fff > /sys/class/net/wlan0/device/debug_level
 84
 85	  You can find the list of debug mask values in:
 86		  drivers/net/wireless/iwlegacy/common.h
 87
 88	  If this is your first time using this driver, you should say Y here
 89	  as the debug information can assist others in helping you resolve
 90	  any problems you may encounter.
 91
 92config IWLEGACY_DEBUGFS
 93        bool "iwlegacy (iwl 3945/4965) debugfs support"
 94        depends on IWLEGACY && MAC80211_DEBUGFS
 95        ---help---
 96	  Enable creation of debugfs files for the iwlegacy drivers. This
 97	  is a low-impact option that allows getting insight into the
 98	  driver's state at runtime.
 99
100endmenu