Loading...
1
2/******************************************************************************
3 *
4 * Name: hwsleep.c - ACPI Hardware Sleep/Wake Interface
5 *
6 *****************************************************************************/
7
8/*
9 * Copyright (C) 2000 - 2011, Intel Corp.
10 * All rights reserved.
11 *
12 * Redistribution and use in source and binary forms, with or without
13 * modification, are permitted provided that the following conditions
14 * are met:
15 * 1. Redistributions of source code must retain the above copyright
16 * notice, this list of conditions, and the following disclaimer,
17 * without modification.
18 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
19 * substantially similar to the "NO WARRANTY" disclaimer below
20 * ("Disclaimer") and any redistribution must be conditioned upon
21 * including a substantially similar Disclaimer requirement for further
22 * binary redistribution.
23 * 3. Neither the names of the above-listed copyright holders nor the names
24 * of any contributors may be used to endorse or promote products derived
25 * from this software without specific prior written permission.
26 *
27 * Alternatively, this software may be distributed under the terms of the
28 * GNU General Public License ("GPL") version 2 as published by the Free
29 * Software Foundation.
30 *
31 * NO WARRANTY
32 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
33 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
34 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
35 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
36 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
38 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
39 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
40 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
41 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
42 * POSSIBILITY OF SUCH DAMAGES.
43 */
44
45#include <acpi/acpi.h>
46#include "accommon.h"
47#include "actables.h"
48#include <linux/tboot.h>
49
50#define _COMPONENT ACPI_HARDWARE
51ACPI_MODULE_NAME("hwsleep")
52
53/*******************************************************************************
54 *
55 * FUNCTION: acpi_set_firmware_waking_vector
56 *
57 * PARAMETERS: physical_address - 32-bit physical address of ACPI real mode
58 * entry point.
59 *
60 * RETURN: Status
61 *
62 * DESCRIPTION: Sets the 32-bit firmware_waking_vector field of the FACS
63 *
64 ******************************************************************************/
65acpi_status
66acpi_set_firmware_waking_vector(u32 physical_address)
67{
68 ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector);
69
70
71 /*
72 * According to the ACPI specification 2.0c and later, the 64-bit
73 * waking vector should be cleared and the 32-bit waking vector should
74 * be used, unless we want the wake-up code to be called by the BIOS in
75 * Protected Mode. Some systems (for example HP dv5-1004nr) are known
76 * to fail to resume if the 64-bit vector is used.
77 */
78
79 /* Set the 32-bit vector */
80
81 acpi_gbl_FACS->firmware_waking_vector = physical_address;
82
83 /* Clear the 64-bit vector if it exists */
84
85 if ((acpi_gbl_FACS->length > 32) && (acpi_gbl_FACS->version >= 1)) {
86 acpi_gbl_FACS->xfirmware_waking_vector = 0;
87 }
88
89 return_ACPI_STATUS(AE_OK);
90}
91
92ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector)
93
94#if ACPI_MACHINE_WIDTH == 64
95/*******************************************************************************
96 *
97 * FUNCTION: acpi_set_firmware_waking_vector64
98 *
99 * PARAMETERS: physical_address - 64-bit physical address of ACPI protected
100 * mode entry point.
101 *
102 * RETURN: Status
103 *
104 * DESCRIPTION: Sets the 64-bit X_firmware_waking_vector field of the FACS, if
105 * it exists in the table. This function is intended for use with
106 * 64-bit host operating systems.
107 *
108 ******************************************************************************/
109acpi_status
110acpi_set_firmware_waking_vector64(u64 physical_address)
111{
112 ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector64);
113
114
115 /* Determine if the 64-bit vector actually exists */
116
117 if ((acpi_gbl_FACS->length <= 32) || (acpi_gbl_FACS->version < 1)) {
118 return_ACPI_STATUS(AE_NOT_EXIST);
119 }
120
121 /* Clear 32-bit vector, set the 64-bit X_ vector */
122
123 acpi_gbl_FACS->firmware_waking_vector = 0;
124 acpi_gbl_FACS->xfirmware_waking_vector = physical_address;
125
126 return_ACPI_STATUS(AE_OK);
127}
128
129ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector64)
130#endif
131
132/*******************************************************************************
133 *
134 * FUNCTION: acpi_enter_sleep_state_prep
135 *
136 * PARAMETERS: sleep_state - Which sleep state to enter
137 *
138 * RETURN: Status
139 *
140 * DESCRIPTION: Prepare to enter a system sleep state (see ACPI 2.0 spec p 231)
141 * This function must execute with interrupts enabled.
142 * We break sleeping into 2 stages so that OSPM can handle
143 * various OS-specific tasks between the two steps.
144 *
145 ******************************************************************************/
146acpi_status acpi_enter_sleep_state_prep(u8 sleep_state)
147{
148 acpi_status status;
149 struct acpi_object_list arg_list;
150 union acpi_object arg;
151
152 ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_prep);
153
154 /* _PSW methods could be run here to enable wake-on keyboard, LAN, etc. */
155
156 status = acpi_get_sleep_type_data(sleep_state,
157 &acpi_gbl_sleep_type_a,
158 &acpi_gbl_sleep_type_b);
159 if (ACPI_FAILURE(status)) {
160 return_ACPI_STATUS(status);
161 }
162
163 /* Setup parameter object */
164
165 arg_list.count = 1;
166 arg_list.pointer = &arg;
167
168 arg.type = ACPI_TYPE_INTEGER;
169 arg.integer.value = sleep_state;
170
171 /* Run the _PTS method */
172
173 status = acpi_evaluate_object(NULL, METHOD_NAME__PTS, &arg_list, NULL);
174 if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
175 return_ACPI_STATUS(status);
176 }
177
178 /* Setup the argument to _SST */
179
180 switch (sleep_state) {
181 case ACPI_STATE_S0:
182 arg.integer.value = ACPI_SST_WORKING;
183 break;
184
185 case ACPI_STATE_S1:
186 case ACPI_STATE_S2:
187 case ACPI_STATE_S3:
188 arg.integer.value = ACPI_SST_SLEEPING;
189 break;
190
191 case ACPI_STATE_S4:
192 arg.integer.value = ACPI_SST_SLEEP_CONTEXT;
193 break;
194
195 default:
196 arg.integer.value = ACPI_SST_INDICATOR_OFF; /* Default is off */
197 break;
198 }
199
200 /*
201 * Set the system indicators to show the desired sleep state.
202 * _SST is an optional method (return no error if not found)
203 */
204 status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL);
205 if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
206 ACPI_EXCEPTION((AE_INFO, status,
207 "While executing method _SST"));
208 }
209
210 return_ACPI_STATUS(AE_OK);
211}
212
213ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep)
214
215static unsigned int gts, bfs;
216module_param(gts, uint, 0644);
217module_param(bfs, uint, 0644);
218MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend.");
219MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".);
220
221/*******************************************************************************
222 *
223 * FUNCTION: acpi_enter_sleep_state
224 *
225 * PARAMETERS: sleep_state - Which sleep state to enter
226 *
227 * RETURN: Status
228 *
229 * DESCRIPTION: Enter a system sleep state (see ACPI 2.0 spec p 231)
230 * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
231 *
232 ******************************************************************************/
233acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state)
234{
235 u32 pm1a_control;
236 u32 pm1b_control;
237 struct acpi_bit_register_info *sleep_type_reg_info;
238 struct acpi_bit_register_info *sleep_enable_reg_info;
239 u32 in_value;
240 struct acpi_object_list arg_list;
241 union acpi_object arg;
242 acpi_status status;
243
244 ACPI_FUNCTION_TRACE(acpi_enter_sleep_state);
245
246 if ((acpi_gbl_sleep_type_a > ACPI_SLEEP_TYPE_MAX) ||
247 (acpi_gbl_sleep_type_b > ACPI_SLEEP_TYPE_MAX)) {
248 ACPI_ERROR((AE_INFO, "Sleep values out of range: A=0x%X B=0x%X",
249 acpi_gbl_sleep_type_a, acpi_gbl_sleep_type_b));
250 return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
251 }
252
253 sleep_type_reg_info =
254 acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_TYPE);
255 sleep_enable_reg_info =
256 acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_ENABLE);
257
258 /* Clear wake status */
259
260 status =
261 acpi_write_bit_register(ACPI_BITREG_WAKE_STATUS, ACPI_CLEAR_STATUS);
262 if (ACPI_FAILURE(status)) {
263 return_ACPI_STATUS(status);
264 }
265
266 /* Clear all fixed and general purpose status bits */
267
268 status = acpi_hw_clear_acpi_status();
269 if (ACPI_FAILURE(status)) {
270 return_ACPI_STATUS(status);
271 }
272
273 /*
274 * 1) Disable/Clear all GPEs
275 * 2) Enable all wakeup GPEs
276 */
277 status = acpi_hw_disable_all_gpes();
278 if (ACPI_FAILURE(status)) {
279 return_ACPI_STATUS(status);
280 }
281 acpi_gbl_system_awake_and_running = FALSE;
282
283 status = acpi_hw_enable_all_wakeup_gpes();
284 if (ACPI_FAILURE(status)) {
285 return_ACPI_STATUS(status);
286 }
287
288 if (gts) {
289 /* Execute the _GTS method */
290
291 arg_list.count = 1;
292 arg_list.pointer = &arg;
293 arg.type = ACPI_TYPE_INTEGER;
294 arg.integer.value = sleep_state;
295
296 status = acpi_evaluate_object(NULL, METHOD_NAME__GTS, &arg_list, NULL);
297 if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
298 return_ACPI_STATUS(status);
299 }
300 }
301
302 /* Get current value of PM1A control */
303
304 status = acpi_hw_register_read(ACPI_REGISTER_PM1_CONTROL,
305 &pm1a_control);
306 if (ACPI_FAILURE(status)) {
307 return_ACPI_STATUS(status);
308 }
309 ACPI_DEBUG_PRINT((ACPI_DB_INIT,
310 "Entering sleep state [S%u]\n", sleep_state));
311
312 /* Clear the SLP_EN and SLP_TYP fields */
313
314 pm1a_control &= ~(sleep_type_reg_info->access_bit_mask |
315 sleep_enable_reg_info->access_bit_mask);
316 pm1b_control = pm1a_control;
317
318 /* Insert the SLP_TYP bits */
319
320 pm1a_control |=
321 (acpi_gbl_sleep_type_a << sleep_type_reg_info->bit_position);
322 pm1b_control |=
323 (acpi_gbl_sleep_type_b << sleep_type_reg_info->bit_position);
324
325 /*
326 * We split the writes of SLP_TYP and SLP_EN to workaround
327 * poorly implemented hardware.
328 */
329
330 /* Write #1: write the SLP_TYP data to the PM1 Control registers */
331
332 status = acpi_hw_write_pm1_control(pm1a_control, pm1b_control);
333 if (ACPI_FAILURE(status)) {
334 return_ACPI_STATUS(status);
335 }
336
337 /* Insert the sleep enable (SLP_EN) bit */
338
339 pm1a_control |= sleep_enable_reg_info->access_bit_mask;
340 pm1b_control |= sleep_enable_reg_info->access_bit_mask;
341
342 /* Flush caches, as per ACPI specification */
343
344 ACPI_FLUSH_CPU_CACHE();
345
346 tboot_sleep(sleep_state, pm1a_control, pm1b_control);
347
348 /* Write #2: Write both SLP_TYP + SLP_EN */
349
350 status = acpi_hw_write_pm1_control(pm1a_control, pm1b_control);
351 if (ACPI_FAILURE(status)) {
352 return_ACPI_STATUS(status);
353 }
354
355 if (sleep_state > ACPI_STATE_S3) {
356 /*
357 * We wanted to sleep > S3, but it didn't happen (by virtue of the
358 * fact that we are still executing!)
359 *
360 * Wait ten seconds, then try again. This is to get S4/S5 to work on
361 * all machines.
362 *
363 * We wait so long to allow chipsets that poll this reg very slowly
364 * to still read the right value. Ideally, this block would go
365 * away entirely.
366 */
367 acpi_os_stall(10000000);
368
369 status = acpi_hw_register_write(ACPI_REGISTER_PM1_CONTROL,
370 sleep_enable_reg_info->
371 access_bit_mask);
372 if (ACPI_FAILURE(status)) {
373 return_ACPI_STATUS(status);
374 }
375 }
376
377 /* Wait until we enter sleep state */
378
379 do {
380 status = acpi_read_bit_register(ACPI_BITREG_WAKE_STATUS,
381 &in_value);
382 if (ACPI_FAILURE(status)) {
383 return_ACPI_STATUS(status);
384 }
385
386 /* Spin until we wake */
387
388 } while (!in_value);
389
390 return_ACPI_STATUS(AE_OK);
391}
392
393ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state)
394
395/*******************************************************************************
396 *
397 * FUNCTION: acpi_enter_sleep_state_s4bios
398 *
399 * PARAMETERS: None
400 *
401 * RETURN: Status
402 *
403 * DESCRIPTION: Perform a S4 bios request.
404 * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
405 *
406 ******************************************************************************/
407acpi_status asmlinkage acpi_enter_sleep_state_s4bios(void)
408{
409 u32 in_value;
410 acpi_status status;
411
412 ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_s4bios);
413
414 /* Clear the wake status bit (PM1) */
415
416 status =
417 acpi_write_bit_register(ACPI_BITREG_WAKE_STATUS, ACPI_CLEAR_STATUS);
418 if (ACPI_FAILURE(status)) {
419 return_ACPI_STATUS(status);
420 }
421
422 status = acpi_hw_clear_acpi_status();
423 if (ACPI_FAILURE(status)) {
424 return_ACPI_STATUS(status);
425 }
426
427 /*
428 * 1) Disable/Clear all GPEs
429 * 2) Enable all wakeup GPEs
430 */
431 status = acpi_hw_disable_all_gpes();
432 if (ACPI_FAILURE(status)) {
433 return_ACPI_STATUS(status);
434 }
435 acpi_gbl_system_awake_and_running = FALSE;
436
437 status = acpi_hw_enable_all_wakeup_gpes();
438 if (ACPI_FAILURE(status)) {
439 return_ACPI_STATUS(status);
440 }
441
442 ACPI_FLUSH_CPU_CACHE();
443
444 status = acpi_hw_write_port(acpi_gbl_FADT.smi_command,
445 (u32) acpi_gbl_FADT.S4bios_request, 8);
446
447 do {
448 acpi_os_stall(1000);
449 status =
450 acpi_read_bit_register(ACPI_BITREG_WAKE_STATUS, &in_value);
451 if (ACPI_FAILURE(status)) {
452 return_ACPI_STATUS(status);
453 }
454 } while (!in_value);
455
456 return_ACPI_STATUS(AE_OK);
457}
458
459ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_s4bios)
460
461/*******************************************************************************
462 *
463 * FUNCTION: acpi_leave_sleep_state_prep
464 *
465 * PARAMETERS: sleep_state - Which sleep state we are exiting
466 *
467 * RETURN: Status
468 *
469 * DESCRIPTION: Perform the first state of OS-independent ACPI cleanup after a
470 * sleep.
471 * Called with interrupts DISABLED.
472 *
473 ******************************************************************************/
474acpi_status acpi_leave_sleep_state_prep(u8 sleep_state)
475{
476 struct acpi_object_list arg_list;
477 union acpi_object arg;
478 acpi_status status;
479 struct acpi_bit_register_info *sleep_type_reg_info;
480 struct acpi_bit_register_info *sleep_enable_reg_info;
481 u32 pm1a_control;
482 u32 pm1b_control;
483
484 ACPI_FUNCTION_TRACE(acpi_leave_sleep_state_prep);
485
486 /*
487 * Set SLP_TYPE and SLP_EN to state S0.
488 * This is unclear from the ACPI Spec, but it is required
489 * by some machines.
490 */
491 status = acpi_get_sleep_type_data(ACPI_STATE_S0,
492 &acpi_gbl_sleep_type_a,
493 &acpi_gbl_sleep_type_b);
494 if (ACPI_SUCCESS(status)) {
495 sleep_type_reg_info =
496 acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_TYPE);
497 sleep_enable_reg_info =
498 acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_ENABLE);
499
500 /* Get current value of PM1A control */
501
502 status = acpi_hw_register_read(ACPI_REGISTER_PM1_CONTROL,
503 &pm1a_control);
504 if (ACPI_SUCCESS(status)) {
505
506 /* Clear the SLP_EN and SLP_TYP fields */
507
508 pm1a_control &= ~(sleep_type_reg_info->access_bit_mask |
509 sleep_enable_reg_info->
510 access_bit_mask);
511 pm1b_control = pm1a_control;
512
513 /* Insert the SLP_TYP bits */
514
515 pm1a_control |= (acpi_gbl_sleep_type_a <<
516 sleep_type_reg_info->bit_position);
517 pm1b_control |= (acpi_gbl_sleep_type_b <<
518 sleep_type_reg_info->bit_position);
519
520 /* Write the control registers and ignore any errors */
521
522 (void)acpi_hw_write_pm1_control(pm1a_control,
523 pm1b_control);
524 }
525 }
526
527 if (bfs) {
528 /* Execute the _BFS method */
529
530 arg_list.count = 1;
531 arg_list.pointer = &arg;
532 arg.type = ACPI_TYPE_INTEGER;
533 arg.integer.value = sleep_state;
534
535 status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL);
536 if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
537 ACPI_EXCEPTION((AE_INFO, status, "During Method _BFS"));
538 }
539 }
540 return_ACPI_STATUS(status);
541}
542
543/*******************************************************************************
544 *
545 * FUNCTION: acpi_leave_sleep_state
546 *
547 * PARAMETERS: sleep_state - Which sleep state we just exited
548 *
549 * RETURN: Status
550 *
551 * DESCRIPTION: Perform OS-independent ACPI cleanup after a sleep
552 * Called with interrupts ENABLED.
553 *
554 ******************************************************************************/
555acpi_status acpi_leave_sleep_state(u8 sleep_state)
556{
557 struct acpi_object_list arg_list;
558 union acpi_object arg;
559 acpi_status status;
560
561 ACPI_FUNCTION_TRACE(acpi_leave_sleep_state);
562
563 /* Ensure enter_sleep_state_prep -> enter_sleep_state ordering */
564
565 acpi_gbl_sleep_type_a = ACPI_SLEEP_TYPE_INVALID;
566
567 /* Setup parameter object */
568
569 arg_list.count = 1;
570 arg_list.pointer = &arg;
571 arg.type = ACPI_TYPE_INTEGER;
572
573 /* Ignore any errors from these methods */
574
575 arg.integer.value = ACPI_SST_WAKING;
576 status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL);
577 if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
578 ACPI_EXCEPTION((AE_INFO, status, "During Method _SST"));
579 }
580
581 /*
582 * GPEs must be enabled before _WAK is called as GPEs
583 * might get fired there
584 *
585 * Restore the GPEs:
586 * 1) Disable/Clear all GPEs
587 * 2) Enable all runtime GPEs
588 */
589 status = acpi_hw_disable_all_gpes();
590 if (ACPI_FAILURE(status)) {
591 return_ACPI_STATUS(status);
592 }
593 status = acpi_hw_enable_all_runtime_gpes();
594 if (ACPI_FAILURE(status)) {
595 return_ACPI_STATUS(status);
596 }
597
598 arg.integer.value = sleep_state;
599 status = acpi_evaluate_object(NULL, METHOD_NAME__WAK, &arg_list, NULL);
600 if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
601 ACPI_EXCEPTION((AE_INFO, status, "During Method _WAK"));
602 }
603 /* TBD: _WAK "sometimes" returns stuff - do we want to look at it? */
604
605 /*
606 * Some BIOSes assume that WAK_STS will be cleared on resume and use
607 * it to determine whether the system is rebooting or resuming. Clear
608 * it for compatibility.
609 */
610 acpi_write_bit_register(ACPI_BITREG_WAKE_STATUS, 1);
611
612 acpi_gbl_system_awake_and_running = TRUE;
613
614 /* Enable power button */
615
616 (void)
617 acpi_write_bit_register(acpi_gbl_fixed_event_info
618 [ACPI_EVENT_POWER_BUTTON].
619 enable_register_id, ACPI_ENABLE_EVENT);
620
621 (void)
622 acpi_write_bit_register(acpi_gbl_fixed_event_info
623 [ACPI_EVENT_POWER_BUTTON].
624 status_register_id, ACPI_CLEAR_STATUS);
625
626 arg.integer.value = ACPI_SST_WORKING;
627 status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL);
628 if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
629 ACPI_EXCEPTION((AE_INFO, status, "During Method _SST"));
630 }
631
632 return_ACPI_STATUS(status);
633}
634
635ACPI_EXPORT_SYMBOL(acpi_leave_sleep_state)
1// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
2/******************************************************************************
3 *
4 * Name: hwsleep.c - ACPI Hardware Sleep/Wake Support functions for the
5 * original/legacy sleep/PM registers.
6 *
7 * Copyright (C) 2000 - 2018, Intel Corp.
8 *
9 *****************************************************************************/
10
11#include <acpi/acpi.h>
12#include "accommon.h"
13
14#define _COMPONENT ACPI_HARDWARE
15ACPI_MODULE_NAME("hwsleep")
16
17#if (!ACPI_REDUCED_HARDWARE) /* Entire module */
18/*******************************************************************************
19 *
20 * FUNCTION: acpi_hw_legacy_sleep
21 *
22 * PARAMETERS: sleep_state - Which sleep state to enter
23 *
24 * RETURN: Status
25 *
26 * DESCRIPTION: Enter a system sleep state via the legacy FADT PM registers
27 * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
28 *
29 ******************************************************************************/
30acpi_status acpi_hw_legacy_sleep(u8 sleep_state)
31{
32 struct acpi_bit_register_info *sleep_type_reg_info;
33 struct acpi_bit_register_info *sleep_enable_reg_info;
34 u32 pm1a_control;
35 u32 pm1b_control;
36 u32 in_value;
37 acpi_status status;
38
39 ACPI_FUNCTION_TRACE(hw_legacy_sleep);
40
41 sleep_type_reg_info =
42 acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_TYPE);
43 sleep_enable_reg_info =
44 acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_ENABLE);
45
46 /* Clear wake status */
47
48 status = acpi_write_bit_register(ACPI_BITREG_WAKE_STATUS,
49 ACPI_CLEAR_STATUS);
50 if (ACPI_FAILURE(status)) {
51 return_ACPI_STATUS(status);
52 }
53
54 /*
55 * 1) Disable all GPEs
56 * 2) Enable all wakeup GPEs
57 */
58 status = acpi_hw_disable_all_gpes();
59 if (ACPI_FAILURE(status)) {
60 return_ACPI_STATUS(status);
61 }
62 acpi_gbl_system_awake_and_running = FALSE;
63
64 status = acpi_hw_enable_all_wakeup_gpes();
65 if (ACPI_FAILURE(status)) {
66 return_ACPI_STATUS(status);
67 }
68
69 /* Get current value of PM1A control */
70
71 status = acpi_hw_register_read(ACPI_REGISTER_PM1_CONTROL,
72 &pm1a_control);
73 if (ACPI_FAILURE(status)) {
74 return_ACPI_STATUS(status);
75 }
76 ACPI_DEBUG_PRINT((ACPI_DB_INIT,
77 "Entering sleep state [S%u]\n", sleep_state));
78
79 /* Clear the SLP_EN and SLP_TYP fields */
80
81 pm1a_control &= ~(sleep_type_reg_info->access_bit_mask |
82 sleep_enable_reg_info->access_bit_mask);
83 pm1b_control = pm1a_control;
84
85 /* Insert the SLP_TYP bits */
86
87 pm1a_control |=
88 (acpi_gbl_sleep_type_a << sleep_type_reg_info->bit_position);
89 pm1b_control |=
90 (acpi_gbl_sleep_type_b << sleep_type_reg_info->bit_position);
91
92 /*
93 * We split the writes of SLP_TYP and SLP_EN to workaround
94 * poorly implemented hardware.
95 */
96
97 /* Write #1: write the SLP_TYP data to the PM1 Control registers */
98
99 status = acpi_hw_write_pm1_control(pm1a_control, pm1b_control);
100 if (ACPI_FAILURE(status)) {
101 return_ACPI_STATUS(status);
102 }
103
104 /* Insert the sleep enable (SLP_EN) bit */
105
106 pm1a_control |= sleep_enable_reg_info->access_bit_mask;
107 pm1b_control |= sleep_enable_reg_info->access_bit_mask;
108
109 /* Flush caches, as per ACPI specification */
110
111 ACPI_FLUSH_CPU_CACHE();
112
113 status = acpi_os_enter_sleep(sleep_state, pm1a_control, pm1b_control);
114 if (status == AE_CTRL_TERMINATE) {
115 return_ACPI_STATUS(AE_OK);
116 }
117 if (ACPI_FAILURE(status)) {
118 return_ACPI_STATUS(status);
119 }
120
121 /* Write #2: Write both SLP_TYP + SLP_EN */
122
123 status = acpi_hw_write_pm1_control(pm1a_control, pm1b_control);
124 if (ACPI_FAILURE(status)) {
125 return_ACPI_STATUS(status);
126 }
127
128 if (sleep_state > ACPI_STATE_S3) {
129 /*
130 * We wanted to sleep > S3, but it didn't happen (by virtue of the
131 * fact that we are still executing!)
132 *
133 * Wait ten seconds, then try again. This is to get S4/S5 to work on
134 * all machines.
135 *
136 * We wait so long to allow chipsets that poll this reg very slowly
137 * to still read the right value. Ideally, this block would go
138 * away entirely.
139 */
140 acpi_os_stall(10 * ACPI_USEC_PER_SEC);
141
142 status = acpi_hw_register_write(ACPI_REGISTER_PM1_CONTROL,
143 sleep_enable_reg_info->
144 access_bit_mask);
145 if (ACPI_FAILURE(status)) {
146 return_ACPI_STATUS(status);
147 }
148 }
149
150 /* Wait for transition back to Working State */
151
152 do {
153 status =
154 acpi_read_bit_register(ACPI_BITREG_WAKE_STATUS, &in_value);
155 if (ACPI_FAILURE(status)) {
156 return_ACPI_STATUS(status);
157 }
158
159 } while (!in_value);
160
161 return_ACPI_STATUS(AE_OK);
162}
163
164/*******************************************************************************
165 *
166 * FUNCTION: acpi_hw_legacy_wake_prep
167 *
168 * PARAMETERS: sleep_state - Which sleep state we just exited
169 *
170 * RETURN: Status
171 *
172 * DESCRIPTION: Perform the first state of OS-independent ACPI cleanup after a
173 * sleep.
174 * Called with interrupts ENABLED.
175 *
176 ******************************************************************************/
177
178acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state)
179{
180 acpi_status status;
181 struct acpi_bit_register_info *sleep_type_reg_info;
182 struct acpi_bit_register_info *sleep_enable_reg_info;
183 u32 pm1a_control;
184 u32 pm1b_control;
185
186 ACPI_FUNCTION_TRACE(hw_legacy_wake_prep);
187
188 /*
189 * Set SLP_TYPE and SLP_EN to state S0.
190 * This is unclear from the ACPI Spec, but it is required
191 * by some machines.
192 */
193 status = acpi_get_sleep_type_data(ACPI_STATE_S0,
194 &acpi_gbl_sleep_type_a,
195 &acpi_gbl_sleep_type_b);
196 if (ACPI_SUCCESS(status)) {
197 sleep_type_reg_info =
198 acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_TYPE);
199 sleep_enable_reg_info =
200 acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_ENABLE);
201
202 /* Get current value of PM1A control */
203
204 status = acpi_hw_register_read(ACPI_REGISTER_PM1_CONTROL,
205 &pm1a_control);
206 if (ACPI_SUCCESS(status)) {
207
208 /* Clear the SLP_EN and SLP_TYP fields */
209
210 pm1a_control &= ~(sleep_type_reg_info->access_bit_mask |
211 sleep_enable_reg_info->
212 access_bit_mask);
213 pm1b_control = pm1a_control;
214
215 /* Insert the SLP_TYP bits */
216
217 pm1a_control |= (acpi_gbl_sleep_type_a <<
218 sleep_type_reg_info->bit_position);
219 pm1b_control |= (acpi_gbl_sleep_type_b <<
220 sleep_type_reg_info->bit_position);
221
222 /* Write the control registers and ignore any errors */
223
224 (void)acpi_hw_write_pm1_control(pm1a_control,
225 pm1b_control);
226 }
227 }
228
229 return_ACPI_STATUS(status);
230}
231
232/*******************************************************************************
233 *
234 * FUNCTION: acpi_hw_legacy_wake
235 *
236 * PARAMETERS: sleep_state - Which sleep state we just exited
237 *
238 * RETURN: Status
239 *
240 * DESCRIPTION: Perform OS-independent ACPI cleanup after a sleep
241 * Called with interrupts ENABLED.
242 *
243 ******************************************************************************/
244
245acpi_status acpi_hw_legacy_wake(u8 sleep_state)
246{
247 acpi_status status;
248
249 ACPI_FUNCTION_TRACE(hw_legacy_wake);
250
251 /* Ensure enter_sleep_state_prep -> enter_sleep_state ordering */
252
253 acpi_gbl_sleep_type_a = ACPI_SLEEP_TYPE_INVALID;
254 acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WAKING);
255
256 /*
257 * GPEs must be enabled before _WAK is called as GPEs
258 * might get fired there
259 *
260 * Restore the GPEs:
261 * 1) Disable all GPEs
262 * 2) Enable all runtime GPEs
263 */
264 status = acpi_hw_disable_all_gpes();
265 if (ACPI_FAILURE(status)) {
266 return_ACPI_STATUS(status);
267 }
268
269 status = acpi_hw_enable_all_runtime_gpes();
270 if (ACPI_FAILURE(status)) {
271 return_ACPI_STATUS(status);
272 }
273
274 /*
275 * Now we can execute _WAK, etc. Some machines require that the GPEs
276 * are enabled before the wake methods are executed.
277 */
278 acpi_hw_execute_sleep_method(METHOD_PATHNAME__WAK, sleep_state);
279
280 /*
281 * Some BIOS code assumes that WAK_STS will be cleared on resume
282 * and use it to determine whether the system is rebooting or
283 * resuming. Clear WAK_STS for compatibility.
284 */
285 (void)acpi_write_bit_register(ACPI_BITREG_WAKE_STATUS,
286 ACPI_CLEAR_STATUS);
287 acpi_gbl_system_awake_and_running = TRUE;
288
289 /* Enable power button */
290
291 (void)
292 acpi_write_bit_register(acpi_gbl_fixed_event_info
293 [ACPI_EVENT_POWER_BUTTON].
294 enable_register_id, ACPI_ENABLE_EVENT);
295
296 (void)
297 acpi_write_bit_register(acpi_gbl_fixed_event_info
298 [ACPI_EVENT_POWER_BUTTON].
299 status_register_id, ACPI_CLEAR_STATUS);
300
301 acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WORKING);
302 return_ACPI_STATUS(status);
303}
304
305#endif /* !ACPI_REDUCED_HARDWARE */