Loading...
1
2/******************************************************************************
3 *
4 * Module Name: hwacpi - ACPI Hardware Initialization/Mode Interface
5 *
6 *****************************************************************************/
7
8/*
9 * Copyright (C) 2000 - 2011, Intel Corp.
10 * All rights reserved.
11 *
12 * Redistribution and use in source and binary forms, with or without
13 * modification, are permitted provided that the following conditions
14 * are met:
15 * 1. Redistributions of source code must retain the above copyright
16 * notice, this list of conditions, and the following disclaimer,
17 * without modification.
18 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
19 * substantially similar to the "NO WARRANTY" disclaimer below
20 * ("Disclaimer") and any redistribution must be conditioned upon
21 * including a substantially similar Disclaimer requirement for further
22 * binary redistribution.
23 * 3. Neither the names of the above-listed copyright holders nor the names
24 * of any contributors may be used to endorse or promote products derived
25 * from this software without specific prior written permission.
26 *
27 * Alternatively, this software may be distributed under the terms of the
28 * GNU General Public License ("GPL") version 2 as published by the Free
29 * Software Foundation.
30 *
31 * NO WARRANTY
32 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
33 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
34 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
35 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
36 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
38 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
39 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
40 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
41 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
42 * POSSIBILITY OF SUCH DAMAGES.
43 */
44
45#include <acpi/acpi.h>
46#include "accommon.h"
47
48#define _COMPONENT ACPI_HARDWARE
49ACPI_MODULE_NAME("hwacpi")
50
51/******************************************************************************
52 *
53 * FUNCTION: acpi_hw_set_mode
54 *
55 * PARAMETERS: Mode - SYS_MODE_ACPI or SYS_MODE_LEGACY
56 *
57 * RETURN: Status
58 *
59 * DESCRIPTION: Transitions the system into the requested mode.
60 *
61 ******************************************************************************/
62acpi_status acpi_hw_set_mode(u32 mode)
63{
64
65 acpi_status status;
66
67 ACPI_FUNCTION_TRACE(hw_set_mode);
68
69 /*
70 * ACPI 2.0 clarified that if SMI_CMD in FADT is zero,
71 * system does not support mode transition.
72 */
73 if (!acpi_gbl_FADT.smi_command) {
74 ACPI_ERROR((AE_INFO,
75 "No SMI_CMD in FADT, mode transition failed"));
76 return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE);
77 }
78
79 /*
80 * ACPI 2.0 clarified the meaning of ACPI_ENABLE and ACPI_DISABLE
81 * in FADT: If it is zero, enabling or disabling is not supported.
82 * As old systems may have used zero for mode transition,
83 * we make sure both the numbers are zero to determine these
84 * transitions are not supported.
85 */
86 if (!acpi_gbl_FADT.acpi_enable && !acpi_gbl_FADT.acpi_disable) {
87 ACPI_ERROR((AE_INFO,
88 "No ACPI mode transition supported in this system "
89 "(enable/disable both zero)"));
90 return_ACPI_STATUS(AE_OK);
91 }
92
93 switch (mode) {
94 case ACPI_SYS_MODE_ACPI:
95
96 /* BIOS should have disabled ALL fixed and GP events */
97
98 status = acpi_hw_write_port(acpi_gbl_FADT.smi_command,
99 (u32) acpi_gbl_FADT.acpi_enable, 8);
100 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
101 "Attempting to enable ACPI mode\n"));
102 break;
103
104 case ACPI_SYS_MODE_LEGACY:
105
106 /*
107 * BIOS should clear all fixed status bits and restore fixed event
108 * enable bits to default
109 */
110 status = acpi_hw_write_port(acpi_gbl_FADT.smi_command,
111 (u32) acpi_gbl_FADT.acpi_disable,
112 8);
113 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
114 "Attempting to enable Legacy (non-ACPI) mode\n"));
115 break;
116
117 default:
118 return_ACPI_STATUS(AE_BAD_PARAMETER);
119 }
120
121 if (ACPI_FAILURE(status)) {
122 ACPI_EXCEPTION((AE_INFO, status,
123 "Could not write ACPI mode change"));
124 return_ACPI_STATUS(status);
125 }
126
127 return_ACPI_STATUS(AE_OK);
128}
129
130/*******************************************************************************
131 *
132 * FUNCTION: acpi_hw_get_mode
133 *
134 * PARAMETERS: none
135 *
136 * RETURN: SYS_MODE_ACPI or SYS_MODE_LEGACY
137 *
138 * DESCRIPTION: Return current operating state of system. Determined by
139 * querying the SCI_EN bit.
140 *
141 ******************************************************************************/
142
143u32 acpi_hw_get_mode(void)
144{
145 acpi_status status;
146 u32 value;
147
148 ACPI_FUNCTION_TRACE(hw_get_mode);
149
150 /*
151 * ACPI 2.0 clarified that if SMI_CMD in FADT is zero,
152 * system does not support mode transition.
153 */
154 if (!acpi_gbl_FADT.smi_command) {
155 return_UINT32(ACPI_SYS_MODE_ACPI);
156 }
157
158 status = acpi_read_bit_register(ACPI_BITREG_SCI_ENABLE, &value);
159 if (ACPI_FAILURE(status)) {
160 return_UINT32(ACPI_SYS_MODE_LEGACY);
161 }
162
163 if (value) {
164 return_UINT32(ACPI_SYS_MODE_ACPI);
165 } else {
166 return_UINT32(ACPI_SYS_MODE_LEGACY);
167 }
168}
1// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
2/******************************************************************************
3 *
4 * Module Name: hwacpi - ACPI Hardware Initialization/Mode Interface
5 *
6 * Copyright (C) 2000 - 2018, Intel Corp.
7 *
8 *****************************************************************************/
9
10#include <acpi/acpi.h>
11#include "accommon.h"
12
13#define _COMPONENT ACPI_HARDWARE
14ACPI_MODULE_NAME("hwacpi")
15
16#if (!ACPI_REDUCED_HARDWARE) /* Entire module */
17/******************************************************************************
18 *
19 * FUNCTION: acpi_hw_set_mode
20 *
21 * PARAMETERS: mode - SYS_MODE_ACPI or SYS_MODE_LEGACY
22 *
23 * RETURN: Status
24 *
25 * DESCRIPTION: Transitions the system into the requested mode.
26 *
27 ******************************************************************************/
28acpi_status acpi_hw_set_mode(u32 mode)
29{
30
31 acpi_status status;
32
33 ACPI_FUNCTION_TRACE(hw_set_mode);
34
35 /* If the Hardware Reduced flag is set, machine is always in acpi mode */
36
37 if (acpi_gbl_reduced_hardware) {
38 return_ACPI_STATUS(AE_OK);
39 }
40
41 /*
42 * ACPI 2.0 clarified that if SMI_CMD in FADT is zero,
43 * system does not support mode transition.
44 */
45 if (!acpi_gbl_FADT.smi_command) {
46 ACPI_ERROR((AE_INFO,
47 "No SMI_CMD in FADT, mode transition failed"));
48 return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE);
49 }
50
51 /*
52 * ACPI 2.0 clarified the meaning of ACPI_ENABLE and ACPI_DISABLE
53 * in FADT: If it is zero, enabling or disabling is not supported.
54 * As old systems may have used zero for mode transition,
55 * we make sure both the numbers are zero to determine these
56 * transitions are not supported.
57 */
58 if (!acpi_gbl_FADT.acpi_enable && !acpi_gbl_FADT.acpi_disable) {
59 ACPI_ERROR((AE_INFO,
60 "No ACPI mode transition supported in this system "
61 "(enable/disable both zero)"));
62 return_ACPI_STATUS(AE_OK);
63 }
64
65 switch (mode) {
66 case ACPI_SYS_MODE_ACPI:
67
68 /* BIOS should have disabled ALL fixed and GP events */
69
70 status = acpi_hw_write_port(acpi_gbl_FADT.smi_command,
71 (u32) acpi_gbl_FADT.acpi_enable, 8);
72 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
73 "Attempting to enable ACPI mode\n"));
74 break;
75
76 case ACPI_SYS_MODE_LEGACY:
77 /*
78 * BIOS should clear all fixed status bits and restore fixed event
79 * enable bits to default
80 */
81 status = acpi_hw_write_port(acpi_gbl_FADT.smi_command,
82 (u32)acpi_gbl_FADT.acpi_disable, 8);
83 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
84 "Attempting to enable Legacy (non-ACPI) mode\n"));
85 break;
86
87 default:
88
89 return_ACPI_STATUS(AE_BAD_PARAMETER);
90 }
91
92 if (ACPI_FAILURE(status)) {
93 ACPI_EXCEPTION((AE_INFO, status,
94 "Could not write ACPI mode change"));
95 return_ACPI_STATUS(status);
96 }
97
98 return_ACPI_STATUS(AE_OK);
99}
100
101/*******************************************************************************
102 *
103 * FUNCTION: acpi_hw_get_mode
104 *
105 * PARAMETERS: none
106 *
107 * RETURN: SYS_MODE_ACPI or SYS_MODE_LEGACY
108 *
109 * DESCRIPTION: Return current operating state of system. Determined by
110 * querying the SCI_EN bit.
111 *
112 ******************************************************************************/
113
114u32 acpi_hw_get_mode(void)
115{
116 acpi_status status;
117 u32 value;
118
119 ACPI_FUNCTION_TRACE(hw_get_mode);
120
121 /* If the Hardware Reduced flag is set, machine is always in acpi mode */
122
123 if (acpi_gbl_reduced_hardware) {
124 return_UINT32(ACPI_SYS_MODE_ACPI);
125 }
126
127 /*
128 * ACPI 2.0 clarified that if SMI_CMD in FADT is zero,
129 * system does not support mode transition.
130 */
131 if (!acpi_gbl_FADT.smi_command) {
132 return_UINT32(ACPI_SYS_MODE_ACPI);
133 }
134
135 status = acpi_read_bit_register(ACPI_BITREG_SCI_ENABLE, &value);
136 if (ACPI_FAILURE(status)) {
137 return_UINT32(ACPI_SYS_MODE_LEGACY);
138 }
139
140 if (value) {
141 return_UINT32(ACPI_SYS_MODE_ACPI);
142 } else {
143 return_UINT32(ACPI_SYS_MODE_LEGACY);
144 }
145}
146
147#endif /* !ACPI_REDUCED_HARDWARE */