Loading...
Note: File does not exist in v3.1.
1/*
2 * Ralink MT7620A SoC PCI support
3 *
4 * Copyright (C) 2007-2013 Bruce Chang (Mediatek)
5 * Copyright (C) 2013-2016 John Crispin <john@phrozen.org>
6 *
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License version 2 as published
9 * by the Free Software Foundation.
10 */
11
12#include <linux/types.h>
13#include <linux/pci.h>
14#include <linux/io.h>
15#include <linux/init.h>
16#include <linux/delay.h>
17#include <linux/interrupt.h>
18#include <linux/of.h>
19#include <linux/of_irq.h>
20#include <linux/of_pci.h>
21#include <linux/reset.h>
22#include <linux/platform_device.h>
23
24#include <asm/mach-ralink/ralink_regs.h>
25#include <asm/mach-ralink/mt7620.h>
26
27#define RALINK_PCI_IO_MAP_BASE 0x10160000
28#define RALINK_PCI_MEMORY_BASE 0x0
29
30#define RALINK_INT_PCIE0 4
31
32#define RALINK_CLKCFG1 0x30
33#define RALINK_GPIOMODE 0x60
34
35#define PPLL_CFG1 0x9c
36
37#define PPLL_DRV 0xa0
38#define PDRV_SW_SET BIT(31)
39#define LC_CKDRVPD BIT(19)
40#define LC_CKDRVOHZ BIT(18)
41#define LC_CKDRVHZ BIT(17)
42#define LC_CKTEST BIT(16)
43
44/* PCI Bridge registers */
45#define RALINK_PCI_PCICFG_ADDR 0x00
46#define PCIRST BIT(1)
47
48#define RALINK_PCI_PCIENA 0x0C
49#define PCIINT2 BIT(20)
50
51#define RALINK_PCI_CONFIG_ADDR 0x20
52#define RALINK_PCI_CONFIG_DATA_VIRT_REG 0x24
53#define RALINK_PCI_MEMBASE 0x28
54#define RALINK_PCI_IOBASE 0x2C
55
56/* PCI RC registers */
57#define RALINK_PCI0_BAR0SETUP_ADDR 0x10
58#define RALINK_PCI0_IMBASEBAR0_ADDR 0x18
59#define RALINK_PCI0_ID 0x30
60#define RALINK_PCI0_CLASS 0x34
61#define RALINK_PCI0_SUBID 0x38
62#define RALINK_PCI0_STATUS 0x50
63#define PCIE_LINK_UP_ST BIT(0)
64
65#define PCIEPHY0_CFG 0x90
66
67#define RALINK_PCIEPHY_P0_CTL_OFFSET 0x7498
68#define RALINK_PCIE0_CLK_EN BIT(26)
69
70#define BUSY 0x80000000
71#define WAITRETRY_MAX 10
72#define WRITE_MODE (1UL << 23)
73#define DATA_SHIFT 0
74#define ADDR_SHIFT 8
75
76
77static void __iomem *bridge_base;
78static void __iomem *pcie_base;
79
80static struct reset_control *rstpcie0;
81
82static inline void bridge_w32(u32 val, unsigned reg)
83{
84 iowrite32(val, bridge_base + reg);
85}
86
87static inline u32 bridge_r32(unsigned reg)
88{
89 return ioread32(bridge_base + reg);
90}
91
92static inline void pcie_w32(u32 val, unsigned reg)
93{
94 iowrite32(val, pcie_base + reg);
95}
96
97static inline u32 pcie_r32(unsigned reg)
98{
99 return ioread32(pcie_base + reg);
100}
101
102static inline void pcie_m32(u32 clr, u32 set, unsigned reg)
103{
104 u32 val = pcie_r32(reg);
105
106 val &= ~clr;
107 val |= set;
108 pcie_w32(val, reg);
109}
110
111static int wait_pciephy_busy(void)
112{
113 unsigned long reg_value = 0x0, retry = 0;
114
115 while (1) {
116 reg_value = pcie_r32(PCIEPHY0_CFG);
117
118 if (reg_value & BUSY)
119 mdelay(100);
120 else
121 break;
122 if (retry++ > WAITRETRY_MAX) {
123 pr_warn("PCIE-PHY retry failed.\n");
124 return -1;
125 }
126 }
127 return 0;
128}
129
130static void pcie_phy(unsigned long addr, unsigned long val)
131{
132 wait_pciephy_busy();
133 pcie_w32(WRITE_MODE | (val << DATA_SHIFT) | (addr << ADDR_SHIFT),
134 PCIEPHY0_CFG);
135 mdelay(1);
136 wait_pciephy_busy();
137}
138
139static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where,
140 int size, u32 *val)
141{
142 unsigned int slot = PCI_SLOT(devfn);
143 u8 func = PCI_FUNC(devfn);
144 u32 address;
145 u32 data;
146 u32 num = 0;
147
148 if (bus)
149 num = bus->number;
150
151 address = (((where & 0xF00) >> 8) << 24) | (num << 16) | (slot << 11) |
152 (func << 8) | (where & 0xfc) | 0x80000000;
153 bridge_w32(address, RALINK_PCI_CONFIG_ADDR);
154 data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRT_REG);
155
156 switch (size) {
157 case 1:
158 *val = (data >> ((where & 3) << 3)) & 0xff;
159 break;
160 case 2:
161 *val = (data >> ((where & 3) << 3)) & 0xffff;
162 break;
163 case 4:
164 *val = data;
165 break;
166 }
167
168 return PCIBIOS_SUCCESSFUL;
169}
170
171static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where,
172 int size, u32 val)
173{
174 unsigned int slot = PCI_SLOT(devfn);
175 u8 func = PCI_FUNC(devfn);
176 u32 address;
177 u32 data;
178 u32 num = 0;
179
180 if (bus)
181 num = bus->number;
182
183 address = (((where & 0xF00) >> 8) << 24) | (num << 16) | (slot << 11) |
184 (func << 8) | (where & 0xfc) | 0x80000000;
185 bridge_w32(address, RALINK_PCI_CONFIG_ADDR);
186 data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRT_REG);
187
188 switch (size) {
189 case 1:
190 data = (data & ~(0xff << ((where & 3) << 3))) |
191 (val << ((where & 3) << 3));
192 break;
193 case 2:
194 data = (data & ~(0xffff << ((where & 3) << 3))) |
195 (val << ((where & 3) << 3));
196 break;
197 case 4:
198 data = val;
199 break;
200 }
201
202 bridge_w32(data, RALINK_PCI_CONFIG_DATA_VIRT_REG);
203
204 return PCIBIOS_SUCCESSFUL;
205}
206
207struct pci_ops mt7620_pci_ops = {
208 .read = pci_config_read,
209 .write = pci_config_write,
210};
211
212static struct resource mt7620_res_pci_mem1;
213static struct resource mt7620_res_pci_io1;
214struct pci_controller mt7620_controller = {
215 .pci_ops = &mt7620_pci_ops,
216 .mem_resource = &mt7620_res_pci_mem1,
217 .mem_offset = 0x00000000UL,
218 .io_resource = &mt7620_res_pci_io1,
219 .io_offset = 0x00000000UL,
220 .io_map_base = 0xa0000000,
221};
222
223static int mt7620_pci_hw_init(struct platform_device *pdev)
224{
225 /* bypass PCIe DLL */
226 pcie_phy(0x0, 0x80);
227 pcie_phy(0x1, 0x04);
228
229 /* Elastic buffer control */
230 pcie_phy(0x68, 0xB4);
231
232 /* put core into reset */
233 pcie_m32(0, PCIRST, RALINK_PCI_PCICFG_ADDR);
234 reset_control_assert(rstpcie0);
235
236 /* disable power and all clocks */
237 rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
238 rt_sysc_m32(LC_CKDRVPD, PDRV_SW_SET, PPLL_DRV);
239
240 /* bring core out of reset */
241 reset_control_deassert(rstpcie0);
242 rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1);
243 mdelay(100);
244
245 if (!(rt_sysc_r32(PPLL_CFG1) & PDRV_SW_SET)) {
246 dev_err(&pdev->dev, "MT7620 PPLL unlock\n");
247 reset_control_assert(rstpcie0);
248 rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
249 return -1;
250 }
251
252 /* power up the bus */
253 rt_sysc_m32(LC_CKDRVHZ | LC_CKDRVOHZ, LC_CKDRVPD | PDRV_SW_SET,
254 PPLL_DRV);
255
256 return 0;
257}
258
259static int mt7628_pci_hw_init(struct platform_device *pdev)
260{
261 u32 val = 0;
262
263 /* bring the core out of reset */
264 rt_sysc_m32(BIT(16), 0, RALINK_GPIOMODE);
265 reset_control_deassert(rstpcie0);
266
267 /* enable the pci clk */
268 rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1);
269 mdelay(100);
270
271 /* voodoo from the SDK driver */
272 pcie_m32(~0xff, 0x5, RALINK_PCIEPHY_P0_CTL_OFFSET);
273
274 pci_config_read(NULL, 0, 0x70c, 4, &val);
275 val &= ~(0xff) << 8;
276 val |= 0x50 << 8;
277 pci_config_write(NULL, 0, 0x70c, 4, val);
278
279 pci_config_read(NULL, 0, 0x70c, 4, &val);
280 dev_err(&pdev->dev, "Port 0 N_FTS = %x\n", (unsigned int) val);
281
282 return 0;
283}
284
285static int mt7620_pci_probe(struct platform_device *pdev)
286{
287 struct resource *bridge_res = platform_get_resource(pdev,
288 IORESOURCE_MEM, 0);
289 struct resource *pcie_res = platform_get_resource(pdev,
290 IORESOURCE_MEM, 1);
291 u32 val = 0;
292
293 rstpcie0 = devm_reset_control_get_exclusive(&pdev->dev, "pcie0");
294 if (IS_ERR(rstpcie0))
295 return PTR_ERR(rstpcie0);
296
297 bridge_base = devm_ioremap_resource(&pdev->dev, bridge_res);
298 if (IS_ERR(bridge_base))
299 return PTR_ERR(bridge_base);
300
301 pcie_base = devm_ioremap_resource(&pdev->dev, pcie_res);
302 if (IS_ERR(pcie_base))
303 return PTR_ERR(pcie_base);
304
305 iomem_resource.start = 0;
306 iomem_resource.end = ~0;
307 ioport_resource.start = 0;
308 ioport_resource.end = ~0;
309
310 /* bring up the pci core */
311 switch (ralink_soc) {
312 case MT762X_SOC_MT7620A:
313 if (mt7620_pci_hw_init(pdev))
314 return -1;
315 break;
316
317 case MT762X_SOC_MT7628AN:
318 case MT762X_SOC_MT7688:
319 if (mt7628_pci_hw_init(pdev))
320 return -1;
321 break;
322
323 default:
324 dev_err(&pdev->dev, "pcie is not supported on this hardware\n");
325 return -1;
326 }
327 mdelay(50);
328
329 /* enable write access */
330 pcie_m32(PCIRST, 0, RALINK_PCI_PCICFG_ADDR);
331 mdelay(100);
332
333 /* check if there is a card present */
334 if ((pcie_r32(RALINK_PCI0_STATUS) & PCIE_LINK_UP_ST) == 0) {
335 reset_control_assert(rstpcie0);
336 rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
337 if (ralink_soc == MT762X_SOC_MT7620A)
338 rt_sysc_m32(LC_CKDRVPD, PDRV_SW_SET, PPLL_DRV);
339 dev_err(&pdev->dev, "PCIE0 no card, disable it(RST&CLK)\n");
340 return -1;
341 }
342
343 /* setup ranges */
344 bridge_w32(0xffffffff, RALINK_PCI_MEMBASE);
345 bridge_w32(RALINK_PCI_IO_MAP_BASE, RALINK_PCI_IOBASE);
346
347 pcie_w32(0x7FFF0001, RALINK_PCI0_BAR0SETUP_ADDR);
348 pcie_w32(RALINK_PCI_MEMORY_BASE, RALINK_PCI0_IMBASEBAR0_ADDR);
349 pcie_w32(0x06040001, RALINK_PCI0_CLASS);
350
351 /* enable interrupts */
352 pcie_m32(0, PCIINT2, RALINK_PCI_PCIENA);
353
354 /* voodoo from the SDK driver */
355 pci_config_read(NULL, 0, 4, 4, &val);
356 pci_config_write(NULL, 0, 4, 4, val | 0x7);
357
358 pci_load_of_ranges(&mt7620_controller, pdev->dev.of_node);
359 register_pci_controller(&mt7620_controller);
360
361 return 0;
362}
363
364int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
365{
366 u16 cmd;
367 u32 val;
368 int irq = 0;
369
370 if ((dev->bus->number == 0) && (slot == 0)) {
371 pcie_w32(0x7FFF0001, RALINK_PCI0_BAR0SETUP_ADDR);
372 pci_config_write(dev->bus, 0, PCI_BASE_ADDRESS_0, 4,
373 RALINK_PCI_MEMORY_BASE);
374 pci_config_read(dev->bus, 0, PCI_BASE_ADDRESS_0, 4, &val);
375 } else if ((dev->bus->number == 1) && (slot == 0x0)) {
376 irq = RALINK_INT_PCIE0;
377 } else {
378 dev_err(&dev->dev, "no irq found - bus=0x%x, slot = 0x%x\n",
379 dev->bus->number, slot);
380 return 0;
381 }
382 dev_err(&dev->dev, "card - bus=0x%x, slot = 0x%x irq=%d\n",
383 dev->bus->number, slot, irq);
384
385 /* configure the cache line size to 0x14 */
386 pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x14);
387
388 /* configure latency timer to 0xff */
389 pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xff);
390 pci_read_config_word(dev, PCI_COMMAND, &cmd);
391
392 /* setup the slot */
393 cmd = cmd | PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
394 pci_write_config_word(dev, PCI_COMMAND, cmd);
395 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
396
397 return irq;
398}
399
400int pcibios_plat_dev_init(struct pci_dev *dev)
401{
402 return 0;
403}
404
405static const struct of_device_id mt7620_pci_ids[] = {
406 { .compatible = "mediatek,mt7620-pci" },
407 {},
408};
409
410static struct platform_driver mt7620_pci_driver = {
411 .probe = mt7620_pci_probe,
412 .driver = {
413 .name = "mt7620-pci",
414 .of_match_table = of_match_ptr(mt7620_pci_ids),
415 },
416};
417
418static int __init mt7620_pci_init(void)
419{
420 return platform_driver_register(&mt7620_pci_driver);
421}
422
423arch_initcall(mt7620_pci_init);