1/*
   2 * MUSB OTG driver core code
   3 *
   4 * Copyright 2005 Mentor Graphics Corporation
   5 * Copyright (C) 2005-2006 by Texas Instruments
   6 * Copyright (C) 2006-2007 Nokia Corporation
   7 *
   8 * This program is free software; you can redistribute it and/or
   9 * modify it under the terms of the GNU General Public License
  10 * version 2 as published by the Free Software Foundation.
  11 *
  12 * This program is distributed in the hope that it will be useful, but
  13 * WITHOUT ANY WARRANTY; without even the implied warranty of
  14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  15 * General Public License for more details.
  16 *
  17 * You should have received a copy of the GNU General Public License
  18 * along with this program; if not, write to the Free Software
  19 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
  20 * 02110-1301 USA
  21 *
  22 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
  23 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
  24 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
  25 * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
  26 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  27 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
  28 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
  29 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  30 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  31 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  32 *
  33 */
  34
  35/*
  36 * Inventra (Multipoint) Dual-Role Controller Driver for Linux.
  37 *
  38 * This consists of a Host Controller Driver (HCD) and a peripheral
  39 * controller driver implementing the "Gadget" API; OTG support is
  40 * in the works.  These are normal Linux-USB controller drivers which
  41 * use IRQs and have no dedicated thread.
  42 *
  43 * This version of the driver has only been used with products from
  44 * Texas Instruments.  Those products integrate the Inventra logic
  45 * with other DMA, IRQ, and bus modules, as well as other logic that
  46 * needs to be reflected in this driver.
  47 *
  48 *
  49 * NOTE:  the original Mentor code here was pretty much a collection
  50 * of mechanisms that don't seem to have been fully integrated/working
  51 * for *any* Linux kernel version.  This version aims at Linux 2.6.now,
  52 * Key open issues include:
  53 *
  54 *  - Lack of host-side transaction scheduling, for all transfer types.
  55 *    The hardware doesn't do it; instead, software must.
  56 *
  57 *    This is not an issue for OTG devices that don't support external
  58 *    hubs, but for more "normal" USB hosts it's a user issue that the
  59 *    "multipoint" support doesn't scale in the expected ways.  That
  60 *    includes DaVinci EVM in a common non-OTG mode.
  61 *
  62 *      * Control and bulk use dedicated endpoints, and there's as
  63 *        yet no mechanism to either (a) reclaim the hardware when
  64 *        peripherals are NAKing, which gets complicated with bulk
  65 *        endpoints, or (b) use more than a single bulk endpoint in
  66 *        each direction.
  67 *
  68 *        RESULT:  one device may be perceived as blocking another one.
  69 *
  70 *      * Interrupt and isochronous will dynamically allocate endpoint
  71 *        hardware, but (a) there's no record keeping for bandwidth;
  72 *        (b) in the common case that few endpoints are available, there
  73 *        is no mechanism to reuse endpoints to talk to multiple devices.
  74 *
  75 *        RESULT:  At one extreme, bandwidth can be overcommitted in
  76 *        some hardware configurations, no faults will be reported.
  77 *        At the other extreme, the bandwidth capabilities which do
  78 *        exist tend to be severely undercommitted.  You can't yet hook
  79 *        up both a keyboard and a mouse to an external USB hub.
  80 */
  81
  82/*
  83 * This gets many kinds of configuration information:
  84 *	- Kconfig for everything user-configurable
  85 *	- platform_device for addressing, irq, and platform_data
  86 *	- platform_data is mostly for board-specific informarion
  87 *	  (plus recentrly, SOC or family details)
  88 *
  89 * Most of the conditional compilation will (someday) vanish.
  90 */
  91
  92#include <linux/module.h>
  93#include <linux/kernel.h>
  94#include <linux/sched.h>
  95#include <linux/slab.h>
  96#include <linux/init.h>
  97#include <linux/list.h>
  98#include <linux/kobject.h>
  99#include <linux/prefetch.h>
 100#include <linux/platform_device.h>
 101#include <linux/io.h>
 
 
 
 102
 103#include "musb_core.h"
 
 104
 105#define TA_WAIT_BCON(m) max_t(int, (m)->a_wait_bcon, OTG_TIME_A_WAIT_BCON)
 106
 107
 108#define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia"
 109#define DRIVER_DESC "Inventra Dual-Role USB Controller Driver"
 110
 111#define MUSB_VERSION "6.0"
 112
 113#define DRIVER_INFO DRIVER_DESC ", v" MUSB_VERSION
 114
 115#define MUSB_DRIVER_NAME "musb-hdrc"
 116const char musb_driver_name[] = MUSB_DRIVER_NAME;
 117
 118MODULE_DESCRIPTION(DRIVER_INFO);
 119MODULE_AUTHOR(DRIVER_AUTHOR);
 120MODULE_LICENSE("GPL");
 121MODULE_ALIAS("platform:" MUSB_DRIVER_NAME);
 122
 123
 124/*-------------------------------------------------------------------------*/
 125
 126static inline struct musb *dev_to_musb(struct device *dev)
 127{
 128	return dev_get_drvdata(dev);
 129}
 130
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 131/*-------------------------------------------------------------------------*/
 132
 133#ifndef CONFIG_BLACKFIN
 134static int musb_ulpi_read(struct otg_transceiver *otg, u32 offset)
 135{
 136	void __iomem *addr = otg->io_priv;
 137	int	i = 0;
 138	u8	r;
 139	u8	power;
 
 
 
 140
 141	/* Make sure the transceiver is not in low power mode */
 142	power = musb_readb(addr, MUSB_POWER);
 143	power &= ~MUSB_POWER_SUSPENDM;
 144	musb_writeb(addr, MUSB_POWER, power);
 145
 146	/* REVISIT: musbhdrc_ulpi_an.pdf recommends setting the
 147	 * ULPICarKitControlDisableUTMI after clearing POWER_SUSPENDM.
 148	 */
 149
 150	musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)offset);
 151	musb_writeb(addr, MUSB_ULPI_REG_CONTROL,
 152			MUSB_ULPI_REG_REQ | MUSB_ULPI_RDN_WR);
 153
 154	while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL)
 155				& MUSB_ULPI_REG_CMPLT)) {
 156		i++;
 157		if (i == 10000)
 158			return -ETIMEDOUT;
 
 
 159
 160	}
 161	r = musb_readb(addr, MUSB_ULPI_REG_CONTROL);
 162	r &= ~MUSB_ULPI_REG_CMPLT;
 163	musb_writeb(addr, MUSB_ULPI_REG_CONTROL, r);
 164
 165	return musb_readb(addr, MUSB_ULPI_REG_DATA);
 
 
 
 
 
 166}
 167
 168static int musb_ulpi_write(struct otg_transceiver *otg,
 169		u32 offset, u32 data)
 170{
 171	void __iomem *addr = otg->io_priv;
 172	int	i = 0;
 173	u8	r = 0;
 174	u8	power;
 
 
 
 175
 176	/* Make sure the transceiver is not in low power mode */
 177	power = musb_readb(addr, MUSB_POWER);
 178	power &= ~MUSB_POWER_SUSPENDM;
 179	musb_writeb(addr, MUSB_POWER, power);
 180
 181	musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)offset);
 182	musb_writeb(addr, MUSB_ULPI_REG_DATA, (u8)data);
 183	musb_writeb(addr, MUSB_ULPI_REG_CONTROL, MUSB_ULPI_REG_REQ);
 184
 185	while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL)
 186				& MUSB_ULPI_REG_CMPLT)) {
 187		i++;
 188		if (i == 10000)
 189			return -ETIMEDOUT;
 
 
 190	}
 191
 192	r = musb_readb(addr, MUSB_ULPI_REG_CONTROL);
 193	r &= ~MUSB_ULPI_REG_CMPLT;
 194	musb_writeb(addr, MUSB_ULPI_REG_CONTROL, r);
 195
 196	return 0;
 
 
 
 197}
 198#else
 199#define musb_ulpi_read		NULL
 200#define musb_ulpi_write		NULL
 201#endif
 202
 203static struct otg_io_access_ops musb_ulpi_access = {
 204	.read = musb_ulpi_read,
 205	.write = musb_ulpi_write,
 206};
 207
 208/*-------------------------------------------------------------------------*/
 209
 210#if !defined(CONFIG_USB_MUSB_TUSB6010) && !defined(CONFIG_USB_MUSB_BLACKFIN)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 211
 212/*
 213 * Load an endpoint's FIFO
 214 */
 215void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
 
 216{
 217	struct musb *musb = hw_ep->musb;
 218	void __iomem *fifo = hw_ep->fifo;
 219
 
 
 
 220	prefetch((u8 *)src);
 221
 222	dev_dbg(musb->controller, "%cX ep%d fifo %p count %d buf %p\n",
 223			'T', hw_ep->epnum, fifo, len, src);
 224
 225	/* we can't assume unaligned reads work */
 226	if (likely((0x01 & (unsigned long) src) == 0)) {
 227		u16	index = 0;
 228
 229		/* best case is 32bit-aligned source address */
 230		if ((0x02 & (unsigned long) src) == 0) {
 231			if (len >= 4) {
 232				writesl(fifo, src + index, len >> 2);
 233				index += len & ~0x03;
 234			}
 235			if (len & 0x02) {
 236				musb_writew(fifo, 0, *(u16 *)&src[index]);
 237				index += 2;
 238			}
 239		} else {
 240			if (len >= 2) {
 241				writesw(fifo, src + index, len >> 1);
 242				index += len & ~0x01;
 243			}
 244		}
 245		if (len & 0x01)
 246			musb_writeb(fifo, 0, src[index]);
 247	} else  {
 248		/* byte aligned */
 249		writesb(fifo, src, len);
 250	}
 251}
 252
 253#if !defined(CONFIG_USB_MUSB_AM35X)
 254/*
 255 * Unload an endpoint's FIFO
 256 */
 257void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
 258{
 259	struct musb *musb = hw_ep->musb;
 260	void __iomem *fifo = hw_ep->fifo;
 261
 
 
 
 262	dev_dbg(musb->controller, "%cX ep%d fifo %p count %d buf %p\n",
 263			'R', hw_ep->epnum, fifo, len, dst);
 264
 265	/* we can't assume unaligned writes work */
 266	if (likely((0x01 & (unsigned long) dst) == 0)) {
 267		u16	index = 0;
 268
 269		/* best case is 32bit-aligned destination address */
 270		if ((0x02 & (unsigned long) dst) == 0) {
 271			if (len >= 4) {
 272				readsl(fifo, dst, len >> 2);
 273				index = len & ~0x03;
 274			}
 275			if (len & 0x02) {
 276				*(u16 *)&dst[index] = musb_readw(fifo, 0);
 277				index += 2;
 278			}
 279		} else {
 280			if (len >= 2) {
 281				readsw(fifo, dst, len >> 1);
 282				index = len & ~0x01;
 283			}
 284		}
 285		if (len & 0x01)
 286			dst[index] = musb_readb(fifo, 0);
 287	} else  {
 288		/* byte aligned */
 289		readsb(fifo, dst, len);
 290	}
 291}
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 292#endif
 293
 294#endif	/* normal PIO */
 
 
 
 
 
 
 295
 
 
 
 
 296
 297/*-------------------------------------------------------------------------*/
 298
 299/* for high speed test mode; see USB 2.0 spec 7.1.20 */
 300static const u8 musb_test_packet[53] = {
 301	/* implicit SYNC then DATA0 to start */
 302
 303	/* JKJKJKJK x9 */
 304	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 305	/* JJKKJJKK x8 */
 306	0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa,
 307	/* JJJJKKKK x8 */
 308	0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee,
 309	/* JJJJJJJKKKKKKK x8 */
 310	0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 311	/* JJJJJJJK x8 */
 312	0x7f, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd,
 313	/* JKKKKKKK x10, JK */
 314	0xfc, 0x7e, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd, 0x7e
 315
 316	/* implicit CRC16 then EOP to end */
 317};
 318
 319void musb_load_testpacket(struct musb *musb)
 320{
 321	void __iomem	*regs = musb->endpoints[0].regs;
 322
 323	musb_ep_select(musb->mregs, 0);
 324	musb_write_fifo(musb->control_ep,
 325			sizeof(musb_test_packet), musb_test_packet);
 326	musb_writew(regs, MUSB_CSR0, MUSB_CSR0_TXPKTRDY);
 327}
 328
 329/*-------------------------------------------------------------------------*/
 330
 331/*
 332 * Handles OTG hnp timeouts, such as b_ase0_brst
 333 */
 334void musb_otg_timer_func(unsigned long data)
 335{
 336	struct musb	*musb = (struct musb *)data;
 337	unsigned long	flags;
 338
 339	spin_lock_irqsave(&musb->lock, flags);
 340	switch (musb->xceiv->state) {
 341	case OTG_STATE_B_WAIT_ACON:
 342		dev_dbg(musb->controller, "HNP: b_wait_acon timeout; back to b_peripheral\n");
 
 343		musb_g_disconnect(musb);
 344		musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
 345		musb->is_active = 0;
 346		break;
 347	case OTG_STATE_A_SUSPEND:
 348	case OTG_STATE_A_WAIT_BCON:
 349		dev_dbg(musb->controller, "HNP: %s timeout\n",
 350			otg_state_string(musb->xceiv->state));
 351		musb_platform_set_vbus(musb, 0);
 352		musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
 353		break;
 354	default:
 355		dev_dbg(musb->controller, "HNP: Unhandled mode %s\n",
 356			otg_state_string(musb->xceiv->state));
 357	}
 358	musb->ignore_disconnect = 0;
 359	spin_unlock_irqrestore(&musb->lock, flags);
 360}
 361
 362/*
 363 * Stops the HNP transition. Caller must take care of locking.
 364 */
 365void musb_hnp_stop(struct musb *musb)
 366{
 367	struct usb_hcd	*hcd = musb_to_hcd(musb);
 368	void __iomem	*mbase = musb->mregs;
 369	u8	reg;
 370
 371	dev_dbg(musb->controller, "HNP: stop from %s\n", otg_state_string(musb->xceiv->state));
 
 372
 373	switch (musb->xceiv->state) {
 374	case OTG_STATE_A_PERIPHERAL:
 375		musb_g_disconnect(musb);
 376		dev_dbg(musb->controller, "HNP: back to %s\n",
 377			otg_state_string(musb->xceiv->state));
 378		break;
 379	case OTG_STATE_B_HOST:
 380		dev_dbg(musb->controller, "HNP: Disabling HR\n");
 381		hcd->self.is_b_host = 0;
 382		musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
 
 383		MUSB_DEV_MODE(musb);
 384		reg = musb_readb(mbase, MUSB_POWER);
 385		reg |= MUSB_POWER_SUSPENDM;
 386		musb_writeb(mbase, MUSB_POWER, reg);
 387		/* REVISIT: Start SESSION_REQUEST here? */
 388		break;
 389	default:
 390		dev_dbg(musb->controller, "HNP: Stopping in unknown state %s\n",
 391			otg_state_string(musb->xceiv->state));
 392	}
 393
 394	/*
 395	 * When returning to A state after HNP, avoid hub_port_rebounce(),
 396	 * which cause occasional OPT A "Did not receive reset after connect"
 397	 * errors.
 398	 */
 399	musb->port1_status &= ~(USB_PORT_STAT_C_CONNECTION << 16);
 400}
 401
 
 
 402/*
 403 * Interrupt Service Routine to record USB "global" interrupts.
 404 * Since these do not happen often and signify things of
 405 * paramount importance, it seems OK to check them individually;
 406 * the order of the tests is specified in the manual
 407 *
 408 * @param musb instance pointer
 409 * @param int_usb register contents
 410 * @param devctl
 411 * @param power
 412 */
 413
 414static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 415				u8 devctl, u8 power)
 416{
 417	irqreturn_t handled = IRQ_NONE;
 418
 419	dev_dbg(musb->controller, "<== Power=%02x, DevCtl=%02x, int_usb=0x%x\n", power, devctl,
 420		int_usb);
 421
 422	/* in host mode, the peripheral may issue remote wakeup.
 423	 * in peripheral mode, the host may resume the link.
 424	 * spurious RESUME irqs happen too, paired with SUSPEND.
 425	 */
 426	if (int_usb & MUSB_INTR_RESUME) {
 427		handled = IRQ_HANDLED;
 428		dev_dbg(musb->controller, "RESUME (%s)\n", otg_state_string(musb->xceiv->state));
 
 429
 430		if (devctl & MUSB_DEVCTL_HM) {
 431			void __iomem *mbase = musb->mregs;
 432
 433			switch (musb->xceiv->state) {
 434			case OTG_STATE_A_SUSPEND:
 435				/* remote wakeup?  later, GetPortStatus
 436				 * will stop RESUME signaling
 437				 */
 438
 439				if (power & MUSB_POWER_SUSPENDM) {
 440					/* spurious */
 441					musb->int_usb &= ~MUSB_INTR_SUSPEND;
 442					dev_dbg(musb->controller, "Spurious SUSPENDM\n");
 443					break;
 444				}
 445
 446				power &= ~MUSB_POWER_SUSPENDM;
 447				musb_writeb(mbase, MUSB_POWER,
 448						power | MUSB_POWER_RESUME);
 449
 450				musb->port1_status |=
 451						(USB_PORT_STAT_C_SUSPEND << 16)
 452						| MUSB_PORT_STAT_RESUME;
 453				musb->rh_timer = jiffies
 454						+ msecs_to_jiffies(20);
 455
 456				musb->xceiv->state = OTG_STATE_A_HOST;
 457				musb->is_active = 1;
 458				usb_hcd_resume_root_hub(musb_to_hcd(musb));
 
 
 459				break;
 460			case OTG_STATE_B_WAIT_ACON:
 461				musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
 462				musb->is_active = 1;
 463				MUSB_DEV_MODE(musb);
 464				break;
 465			default:
 466				WARNING("bogus %s RESUME (%s)\n",
 467					"host",
 468					otg_state_string(musb->xceiv->state));
 469			}
 470		} else {
 471			switch (musb->xceiv->state) {
 472			case OTG_STATE_A_SUSPEND:
 473				/* possibly DISCONNECT is upcoming */
 474				musb->xceiv->state = OTG_STATE_A_HOST;
 475				usb_hcd_resume_root_hub(musb_to_hcd(musb));
 476				break;
 477			case OTG_STATE_B_WAIT_ACON:
 478			case OTG_STATE_B_PERIPHERAL:
 479				/* disconnect while suspended?  we may
 480				 * not get a disconnect irq...
 481				 */
 482				if ((devctl & MUSB_DEVCTL_VBUS)
 483						!= (3 << MUSB_DEVCTL_VBUS_SHIFT)
 484						) {
 485					musb->int_usb |= MUSB_INTR_DISCONNECT;
 486					musb->int_usb &= ~MUSB_INTR_SUSPEND;
 487					break;
 488				}
 489				musb_g_resume(musb);
 490				break;
 491			case OTG_STATE_B_IDLE:
 492				musb->int_usb &= ~MUSB_INTR_SUSPEND;
 493				break;
 494			default:
 495				WARNING("bogus %s RESUME (%s)\n",
 496					"peripheral",
 497					otg_state_string(musb->xceiv->state));
 498			}
 499		}
 500	}
 501
 502	/* see manual for the order of the tests */
 503	if (int_usb & MUSB_INTR_SESSREQ) {
 504		void __iomem *mbase = musb->mregs;
 505
 506		if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS
 507				&& (devctl & MUSB_DEVCTL_BDEVICE)) {
 508			dev_dbg(musb->controller, "SessReq while on B state\n");
 509			return IRQ_HANDLED;
 510		}
 511
 512		dev_dbg(musb->controller, "SESSION_REQUEST (%s)\n",
 513			otg_state_string(musb->xceiv->state));
 514
 515		/* IRQ arrives from ID pin sense or (later, if VBUS power
 516		 * is removed) SRP.  responses are time critical:
 517		 *  - turn on VBUS (with silicon-specific mechanism)
 518		 *  - go through A_WAIT_VRISE
 519		 *  - ... to A_WAIT_BCON.
 520		 * a_wait_vrise_tmout triggers VBUS_ERROR transitions
 521		 */
 522		musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
 523		musb->ep0_stage = MUSB_EP0_START;
 524		musb->xceiv->state = OTG_STATE_A_IDLE;
 525		MUSB_HST_MODE(musb);
 526		musb_platform_set_vbus(musb, 1);
 527
 528		handled = IRQ_HANDLED;
 529	}
 530
 531	if (int_usb & MUSB_INTR_VBUSERROR) {
 532		int	ignore = 0;
 533
 534		/* During connection as an A-Device, we may see a short
 535		 * current spikes causing voltage drop, because of cable
 536		 * and peripheral capacitance combined with vbus draw.
 537		 * (So: less common with truly self-powered devices, where
 538		 * vbus doesn't act like a power supply.)
 539		 *
 540		 * Such spikes are short; usually less than ~500 usec, max
 541		 * of ~2 msec.  That is, they're not sustained overcurrent
 542		 * errors, though they're reported using VBUSERROR irqs.
 543		 *
 544		 * Workarounds:  (a) hardware: use self powered devices.
 545		 * (b) software:  ignore non-repeated VBUS errors.
 546		 *
 547		 * REVISIT:  do delays from lots of DEBUG_KERNEL checks
 548		 * make trouble here, keeping VBUS < 4.4V ?
 549		 */
 550		switch (musb->xceiv->state) {
 551		case OTG_STATE_A_HOST:
 552			/* recovery is dicey once we've gotten past the
 553			 * initial stages of enumeration, but if VBUS
 554			 * stayed ok at the other end of the link, and
 555			 * another reset is due (at least for high speed,
 556			 * to redo the chirp etc), it might work OK...
 557			 */
 558		case OTG_STATE_A_WAIT_BCON:
 559		case OTG_STATE_A_WAIT_VRISE:
 560			if (musb->vbuserr_retry) {
 561				void __iomem *mbase = musb->mregs;
 562
 563				musb->vbuserr_retry--;
 564				ignore = 1;
 565				devctl |= MUSB_DEVCTL_SESSION;
 566				musb_writeb(mbase, MUSB_DEVCTL, devctl);
 567			} else {
 568				musb->port1_status |=
 569					  USB_PORT_STAT_OVERCURRENT
 570					| (USB_PORT_STAT_C_OVERCURRENT << 16);
 571			}
 572			break;
 573		default:
 574			break;
 575		}
 576
 577		dev_dbg(musb->controller, "VBUS_ERROR in %s (%02x, %s), retry #%d, port1 %08x\n",
 578				otg_state_string(musb->xceiv->state),
 
 579				devctl,
 580				({ char *s;
 581				switch (devctl & MUSB_DEVCTL_VBUS) {
 582				case 0 << MUSB_DEVCTL_VBUS_SHIFT:
 583					s = "<SessEnd"; break;
 584				case 1 << MUSB_DEVCTL_VBUS_SHIFT:
 585					s = "<AValid"; break;
 586				case 2 << MUSB_DEVCTL_VBUS_SHIFT:
 587					s = "<VBusValid"; break;
 588				/* case 3 << MUSB_DEVCTL_VBUS_SHIFT: */
 589				default:
 590					s = "VALID"; break;
 591				}; s; }),
 592				VBUSERR_RETRY_COUNT - musb->vbuserr_retry,
 593				musb->port1_status);
 594
 595		/* go through A_WAIT_VFALL then start a new session */
 596		if (!ignore)
 597			musb_platform_set_vbus(musb, 0);
 598		handled = IRQ_HANDLED;
 599	}
 600
 601	if (int_usb & MUSB_INTR_SUSPEND) {
 602		dev_dbg(musb->controller, "SUSPEND (%s) devctl %02x power %02x\n",
 603			otg_state_string(musb->xceiv->state), devctl, power);
 604		handled = IRQ_HANDLED;
 605
 606		switch (musb->xceiv->state) {
 607		case OTG_STATE_A_PERIPHERAL:
 608			/* We also come here if the cable is removed, since
 609			 * this silicon doesn't report ID-no-longer-grounded.
 610			 *
 611			 * We depend on T(a_wait_bcon) to shut us down, and
 612			 * hope users don't do anything dicey during this
 613			 * undesired detour through A_WAIT_BCON.
 614			 */
 615			musb_hnp_stop(musb);
 616			usb_hcd_resume_root_hub(musb_to_hcd(musb));
 617			musb_root_disconnect(musb);
 618			musb_platform_try_idle(musb, jiffies
 619					+ msecs_to_jiffies(musb->a_wait_bcon
 620						? : OTG_TIME_A_WAIT_BCON));
 621
 622			break;
 623		case OTG_STATE_B_IDLE:
 624			if (!musb->is_active)
 625				break;
 
 626		case OTG_STATE_B_PERIPHERAL:
 627			musb_g_suspend(musb);
 628			musb->is_active = is_otg_enabled(musb)
 629					&& musb->xceiv->gadget->b_hnp_enable;
 630			if (musb->is_active) {
 631				musb->xceiv->state = OTG_STATE_B_WAIT_ACON;
 632				dev_dbg(musb->controller, "HNP: Setting timer for b_ase0_brst\n");
 633				mod_timer(&musb->otg_timer, jiffies
 634					+ msecs_to_jiffies(
 635							OTG_TIME_B_ASE0_BRST));
 636			}
 637			break;
 638		case OTG_STATE_A_WAIT_BCON:
 639			if (musb->a_wait_bcon != 0)
 640				musb_platform_try_idle(musb, jiffies
 641					+ msecs_to_jiffies(musb->a_wait_bcon));
 642			break;
 643		case OTG_STATE_A_HOST:
 644			musb->xceiv->state = OTG_STATE_A_SUSPEND;
 645			musb->is_active = is_otg_enabled(musb)
 646					&& musb->xceiv->host->b_hnp_enable;
 647			break;
 648		case OTG_STATE_B_HOST:
 649			/* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */
 650			dev_dbg(musb->controller, "REVISIT: SUSPEND as B_HOST\n");
 651			break;
 652		default:
 653			/* "should not happen" */
 654			musb->is_active = 0;
 655			break;
 656		}
 657	}
 658
 659	if (int_usb & MUSB_INTR_CONNECT) {
 660		struct usb_hcd *hcd = musb_to_hcd(musb);
 661
 662		handled = IRQ_HANDLED;
 663		musb->is_active = 1;
 664		set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
 665
 666		musb->ep0_stage = MUSB_EP0_START;
 667
 668		/* flush endpoints when transitioning from Device Mode */
 669		if (is_peripheral_active(musb)) {
 670			/* REVISIT HNP; just force disconnect */
 671		}
 672		musb_writew(musb->mregs, MUSB_INTRTXE, musb->epmask);
 673		musb_writew(musb->mregs, MUSB_INTRRXE, musb->epmask & 0xfffe);
 674		musb_writeb(musb->mregs, MUSB_INTRUSBE, 0xf7);
 675		musb->port1_status &= ~(USB_PORT_STAT_LOW_SPEED
 676					|USB_PORT_STAT_HIGH_SPEED
 677					|USB_PORT_STAT_ENABLE
 678					);
 679		musb->port1_status |= USB_PORT_STAT_CONNECTION
 680					|(USB_PORT_STAT_C_CONNECTION << 16);
 681
 682		/* high vs full speed is just a guess until after reset */
 683		if (devctl & MUSB_DEVCTL_LSDEV)
 684			musb->port1_status |= USB_PORT_STAT_LOW_SPEED;
 685
 686		/* indicate new connection to OTG machine */
 687		switch (musb->xceiv->state) {
 688		case OTG_STATE_B_PERIPHERAL:
 689			if (int_usb & MUSB_INTR_SUSPEND) {
 690				dev_dbg(musb->controller, "HNP: SUSPEND+CONNECT, now b_host\n");
 691				int_usb &= ~MUSB_INTR_SUSPEND;
 692				goto b_host;
 693			} else
 694				dev_dbg(musb->controller, "CONNECT as b_peripheral???\n");
 695			break;
 696		case OTG_STATE_B_WAIT_ACON:
 697			dev_dbg(musb->controller, "HNP: CONNECT, now b_host\n");
 698b_host:
 699			musb->xceiv->state = OTG_STATE_B_HOST;
 700			hcd->self.is_b_host = 1;
 701			musb->ignore_disconnect = 0;
 702			del_timer(&musb->otg_timer);
 703			break;
 704		default:
 705			if ((devctl & MUSB_DEVCTL_VBUS)
 706					== (3 << MUSB_DEVCTL_VBUS_SHIFT)) {
 707				musb->xceiv->state = OTG_STATE_A_HOST;
 708				hcd->self.is_b_host = 0;
 
 709			}
 710			break;
 711		}
 712
 713		/* poke the root hub */
 714		MUSB_HST_MODE(musb);
 715		if (hcd->status_urb)
 716			usb_hcd_poll_rh_status(hcd);
 717		else
 718			usb_hcd_resume_root_hub(hcd);
 719
 720		dev_dbg(musb->controller, "CONNECT (%s) devctl %02x\n",
 721				otg_state_string(musb->xceiv->state), devctl);
 722	}
 723
 724	if ((int_usb & MUSB_INTR_DISCONNECT) && !musb->ignore_disconnect) {
 725		dev_dbg(musb->controller, "DISCONNECT (%s) as %s, devctl %02x\n",
 726				otg_state_string(musb->xceiv->state),
 727				MUSB_MODE(musb), devctl);
 728		handled = IRQ_HANDLED;
 729
 730		switch (musb->xceiv->state) {
 731		case OTG_STATE_A_HOST:
 732		case OTG_STATE_A_SUSPEND:
 733			usb_hcd_resume_root_hub(musb_to_hcd(musb));
 734			musb_root_disconnect(musb);
 735			if (musb->a_wait_bcon != 0 && is_otg_enabled(musb))
 736				musb_platform_try_idle(musb, jiffies
 737					+ msecs_to_jiffies(musb->a_wait_bcon));
 738			break;
 739		case OTG_STATE_B_HOST:
 740			/* REVISIT this behaves for "real disconnect"
 741			 * cases; make sure the other transitions from
 742			 * from B_HOST act right too.  The B_HOST code
 743			 * in hnp_stop() is currently not used...
 744			 */
 745			musb_root_disconnect(musb);
 746			musb_to_hcd(musb)->self.is_b_host = 0;
 747			musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
 
 748			MUSB_DEV_MODE(musb);
 749			musb_g_disconnect(musb);
 750			break;
 751		case OTG_STATE_A_PERIPHERAL:
 752			musb_hnp_stop(musb);
 753			musb_root_disconnect(musb);
 754			/* FALLTHROUGH */
 755		case OTG_STATE_B_WAIT_ACON:
 756			/* FALLTHROUGH */
 757		case OTG_STATE_B_PERIPHERAL:
 758		case OTG_STATE_B_IDLE:
 759			musb_g_disconnect(musb);
 760			break;
 761		default:
 762			WARNING("unhandled DISCONNECT transition (%s)\n",
 763				otg_state_string(musb->xceiv->state));
 764			break;
 765		}
 766	}
 767
 768	/* mentor saves a bit: bus reset and babble share the same irq.
 769	 * only host sees babble; only peripheral sees bus reset.
 770	 */
 771	if (int_usb & MUSB_INTR_RESET) {
 772		handled = IRQ_HANDLED;
 773		if (is_host_capable() && (devctl & MUSB_DEVCTL_HM) != 0) {
 774			/*
 775			 * Looks like non-HS BABBLE can be ignored, but
 776			 * HS BABBLE is an error condition. For HS the solution
 777			 * is to avoid babble in the first place and fix what
 778			 * caused BABBLE. When HS BABBLE happens we can only
 779			 * stop the session.
 
 780			 */
 781			if (devctl & (MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV))
 782				dev_dbg(musb->controller, "BABBLE devctl: %02x\n", devctl);
 783			else {
 784				ERR("Stopping host session -- babble\n");
 785				musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
 786			}
 787		} else if (is_peripheral_capable()) {
 788			dev_dbg(musb->controller, "BUS RESET as %s\n",
 789				otg_state_string(musb->xceiv->state));
 790			switch (musb->xceiv->state) {
 791			case OTG_STATE_A_SUSPEND:
 792				/* We need to ignore disconnect on suspend
 793				 * otherwise tusb 2.0 won't reconnect after a
 794				 * power cycle, which breaks otg compliance.
 795				 */
 796				musb->ignore_disconnect = 1;
 797				musb_g_reset(musb);
 798				/* FALLTHROUGH */
 799			case OTG_STATE_A_WAIT_BCON:	/* OPT TD.4.7-900ms */
 800				/* never use invalid T(a_wait_bcon) */
 801				dev_dbg(musb->controller, "HNP: in %s, %d msec timeout\n",
 802					otg_state_string(musb->xceiv->state),
 803					TA_WAIT_BCON(musb));
 804				mod_timer(&musb->otg_timer, jiffies
 805					+ msecs_to_jiffies(TA_WAIT_BCON(musb)));
 806				break;
 807			case OTG_STATE_A_PERIPHERAL:
 808				musb->ignore_disconnect = 0;
 809				del_timer(&musb->otg_timer);
 810				musb_g_reset(musb);
 811				break;
 812			case OTG_STATE_B_WAIT_ACON:
 813				dev_dbg(musb->controller, "HNP: RESET (%s), to b_peripheral\n",
 814					otg_state_string(musb->xceiv->state));
 815				musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
 816				musb_g_reset(musb);
 817				break;
 818			case OTG_STATE_B_IDLE:
 819				musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
 820				/* FALLTHROUGH */
 821			case OTG_STATE_B_PERIPHERAL:
 822				musb_g_reset(musb);
 823				break;
 824			default:
 825				dev_dbg(musb->controller, "Unhandled BUS RESET as %s\n",
 826					otg_state_string(musb->xceiv->state));
 827			}
 828		}
 829	}
 830
 831#if 0
 832/* REVISIT ... this would be for multiplexing periodic endpoints, or
 833 * supporting transfer phasing to prevent exceeding ISO bandwidth
 834 * limits of a given frame or microframe.
 835 *
 836 * It's not needed for peripheral side, which dedicates endpoints;
 837 * though it _might_ use SOF irqs for other purposes.
 838 *
 839 * And it's not currently needed for host side, which also dedicates
 840 * endpoints, relies on TX/RX interval registers, and isn't claimed
 841 * to support ISO transfers yet.
 842 */
 843	if (int_usb & MUSB_INTR_SOF) {
 844		void __iomem *mbase = musb->mregs;
 845		struct musb_hw_ep	*ep;
 846		u8 epnum;
 847		u16 frame;
 848
 849		dev_dbg(musb->controller, "START_OF_FRAME\n");
 850		handled = IRQ_HANDLED;
 851
 852		/* start any periodic Tx transfers waiting for current frame */
 853		frame = musb_readw(mbase, MUSB_FRAME);
 854		ep = musb->endpoints;
 855		for (epnum = 1; (epnum < musb->nr_endpoints)
 856					&& (musb->epmask >= (1 << epnum));
 857				epnum++, ep++) {
 858			/*
 859			 * FIXME handle framecounter wraps (12 bits)
 860			 * eliminate duplicated StartUrb logic
 861			 */
 862			if (ep->dwWaitFrame >= frame) {
 863				ep->dwWaitFrame = 0;
 864				pr_debug("SOF --> periodic TX%s on %d\n",
 865					ep->tx_channel ? " DMA" : "",
 866					epnum);
 867				if (!ep->tx_channel)
 868					musb_h_tx_start(musb, epnum);
 869				else
 870					cppi_hostdma_start(musb, epnum);
 871			}
 872		}		/* end of for loop */
 873	}
 874#endif
 875
 876	schedule_work(&musb->irq_work);
 877
 878	return handled;
 879}
 880
 881/*-------------------------------------------------------------------------*/
 882
 883/*
 884* Program the HDRC to start (enable interrupts, dma, etc.).
 885*/
 886void musb_start(struct musb *musb)
 887{
 888	void __iomem	*regs = musb->mregs;
 889	u8		devctl = musb_readb(regs, MUSB_DEVCTL);
 890
 891	dev_dbg(musb->controller, "<== devctl %02x\n", devctl);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 892
 893	/*  Set INT enable registers, enable interrupts */
 894	musb_writew(regs, MUSB_INTRTXE, musb->epmask);
 895	musb_writew(regs, MUSB_INTRRXE, musb->epmask & 0xfffe);
 
 
 896	musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
 897
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 898	musb_writeb(regs, MUSB_TESTMODE, 0);
 899
 900	/* put into basic highspeed mode and start session */
 901	musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE
 902						| MUSB_POWER_HSENAB
 903						/* ENSUSPEND wedges tusb */
 904						/* | MUSB_POWER_ENSUSPEND */
 905						);
 
 
 
 906
 907	musb->is_active = 0;
 908	devctl = musb_readb(regs, MUSB_DEVCTL);
 909	devctl &= ~MUSB_DEVCTL_SESSION;
 910
 911	if (is_otg_enabled(musb)) {
 912		/* session started after:
 913		 * (a) ID-grounded irq, host mode;
 914		 * (b) vbus present/connect IRQ, peripheral mode;
 915		 * (c) peripheral initiates, using SRP
 916		 */
 917		if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
 918			musb->is_active = 1;
 919		else
 920			devctl |= MUSB_DEVCTL_SESSION;
 921
 922	} else if (is_host_enabled(musb)) {
 923		/* assume ID pin is hard-wired to ground */
 924		devctl |= MUSB_DEVCTL_SESSION;
 925
 926	} else /* peripheral is enabled */ {
 927		if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
 928			musb->is_active = 1;
 929	}
 
 930	musb_platform_enable(musb);
 931	musb_writeb(regs, MUSB_DEVCTL, devctl);
 932}
 933
 934
 935static void musb_generic_disable(struct musb *musb)
 936{
 937	void __iomem	*mbase = musb->mregs;
 938	u16	temp;
 939
 940	/* disable interrupts */
 941	musb_writeb(mbase, MUSB_INTRUSBE, 0);
 942	musb_writew(mbase, MUSB_INTRTXE, 0);
 943	musb_writew(mbase, MUSB_INTRRXE, 0);
 944
 945	/* off */
 946	musb_writeb(mbase, MUSB_DEVCTL, 0);
 947
 948	/*  flush pending interrupts */
 949	temp = musb_readb(mbase, MUSB_INTRUSB);
 950	temp = musb_readw(mbase, MUSB_INTRTX);
 951	temp = musb_readw(mbase, MUSB_INTRRX);
 952
 953}
 954
 955/*
 956 * Make the HDRC stop (disable interrupts, etc.);
 957 * reversible by musb_start
 958 * called on gadget driver unregister
 959 * with controller locked, irqs blocked
 960 * acts as a NOP unless some role activated the hardware
 961 */
 962void musb_stop(struct musb *musb)
 963{
 964	/* stop IRQs, timers, ... */
 965	musb_platform_disable(musb);
 966	musb_generic_disable(musb);
 967	dev_dbg(musb->controller, "HDRC disabled\n");
 968
 969	/* FIXME
 970	 *  - mark host and/or peripheral drivers unusable/inactive
 971	 *  - disable DMA (and enable it in HdrcStart)
 972	 *  - make sure we can musb_start() after musb_stop(); with
 973	 *    OTG mode, gadget driver module rmmod/modprobe cycles that
 974	 *  - ...
 975	 */
 976	musb_platform_try_idle(musb, 0);
 977}
 978
 979static void musb_shutdown(struct platform_device *pdev)
 980{
 981	struct musb	*musb = dev_to_musb(&pdev->dev);
 982	unsigned long	flags;
 983
 984	pm_runtime_get_sync(musb->controller);
 985	spin_lock_irqsave(&musb->lock, flags);
 986	musb_platform_disable(musb);
 987	musb_generic_disable(musb);
 988	spin_unlock_irqrestore(&musb->lock, flags);
 989
 990	if (!is_otg_enabled(musb) && is_host_enabled(musb))
 991		usb_remove_hcd(musb_to_hcd(musb));
 992	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
 993	musb_platform_exit(musb);
 994
 995	pm_runtime_put(musb->controller);
 996	/* FIXME power down */
 997}
 998
 999
1000/*-------------------------------------------------------------------------*/
1001
1002/*
1003 * The silicon either has hard-wired endpoint configurations, or else
1004 * "dynamic fifo" sizing.  The driver has support for both, though at this
1005 * writing only the dynamic sizing is very well tested.   Since we switched
1006 * away from compile-time hardware parameters, we can no longer rely on
1007 * dead code elimination to leave only the relevant one in the object file.
1008 *
1009 * We don't currently use dynamic fifo setup capability to do anything
1010 * more than selecting one of a bunch of predefined configurations.
1011 */
1012#if defined(CONFIG_USB_MUSB_TUSB6010)			\
1013	|| defined(CONFIG_USB_MUSB_TUSB6010_MODULE)	\
1014	|| defined(CONFIG_USB_MUSB_OMAP2PLUS)		\
1015	|| defined(CONFIG_USB_MUSB_OMAP2PLUS_MODULE)	\
1016	|| defined(CONFIG_USB_MUSB_AM35X)		\
1017	|| defined(CONFIG_USB_MUSB_AM35X_MODULE)
1018static ushort __initdata fifo_mode = 4;
1019#elif defined(CONFIG_USB_MUSB_UX500)			\
1020	|| defined(CONFIG_USB_MUSB_UX500_MODULE)
1021static ushort __initdata fifo_mode = 5;
1022#else
1023static ushort __initdata fifo_mode = 2;
1024#endif
1025
1026/* "modprobe ... fifo_mode=1" etc */
1027module_param(fifo_mode, ushort, 0);
1028MODULE_PARM_DESC(fifo_mode, "initial endpoint configuration");
1029
1030/*
1031 * tables defining fifo_mode values.  define more if you like.
1032 * for host side, make sure both halves of ep1 are set up.
1033 */
1034
1035/* mode 0 - fits in 2KB */
1036static struct musb_fifo_cfg __initdata mode_0_cfg[] = {
1037{ .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, },
1038{ .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, },
1039{ .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, },
1040{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
1041{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
1042};
1043
1044/* mode 1 - fits in 4KB */
1045static struct musb_fifo_cfg __initdata mode_1_cfg[] = {
1046{ .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
1047{ .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
1048{ .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, .mode = BUF_DOUBLE, },
1049{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
1050{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
1051};
1052
1053/* mode 2 - fits in 4KB */
1054static struct musb_fifo_cfg __initdata mode_2_cfg[] = {
1055{ .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, },
1056{ .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, },
1057{ .hw_ep_num = 2, .style = FIFO_TX,   .maxpacket = 512, },
1058{ .hw_ep_num = 2, .style = FIFO_RX,   .maxpacket = 512, },
1059{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
1060{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
1061};
1062
1063/* mode 3 - fits in 4KB */
1064static struct musb_fifo_cfg __initdata mode_3_cfg[] = {
1065{ .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
1066{ .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
1067{ .hw_ep_num = 2, .style = FIFO_TX,   .maxpacket = 512, },
1068{ .hw_ep_num = 2, .style = FIFO_RX,   .maxpacket = 512, },
1069{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
1070{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
1071};
1072
1073/* mode 4 - fits in 16KB */
1074static struct musb_fifo_cfg __initdata mode_4_cfg[] = {
1075{ .hw_ep_num =  1, .style = FIFO_TX,   .maxpacket = 512, },
1076{ .hw_ep_num =  1, .style = FIFO_RX,   .maxpacket = 512, },
1077{ .hw_ep_num =  2, .style = FIFO_TX,   .maxpacket = 512, },
1078{ .hw_ep_num =  2, .style = FIFO_RX,   .maxpacket = 512, },
1079{ .hw_ep_num =  3, .style = FIFO_TX,   .maxpacket = 512, },
1080{ .hw_ep_num =  3, .style = FIFO_RX,   .maxpacket = 512, },
1081{ .hw_ep_num =  4, .style = FIFO_TX,   .maxpacket = 512, },
1082{ .hw_ep_num =  4, .style = FIFO_RX,   .maxpacket = 512, },
1083{ .hw_ep_num =  5, .style = FIFO_TX,   .maxpacket = 512, },
1084{ .hw_ep_num =  5, .style = FIFO_RX,   .maxpacket = 512, },
1085{ .hw_ep_num =  6, .style = FIFO_TX,   .maxpacket = 512, },
1086{ .hw_ep_num =  6, .style = FIFO_RX,   .maxpacket = 512, },
1087{ .hw_ep_num =  7, .style = FIFO_TX,   .maxpacket = 512, },
1088{ .hw_ep_num =  7, .style = FIFO_RX,   .maxpacket = 512, },
1089{ .hw_ep_num =  8, .style = FIFO_TX,   .maxpacket = 512, },
1090{ .hw_ep_num =  8, .style = FIFO_RX,   .maxpacket = 512, },
1091{ .hw_ep_num =  9, .style = FIFO_TX,   .maxpacket = 512, },
1092{ .hw_ep_num =  9, .style = FIFO_RX,   .maxpacket = 512, },
1093{ .hw_ep_num = 10, .style = FIFO_TX,   .maxpacket = 256, },
1094{ .hw_ep_num = 10, .style = FIFO_RX,   .maxpacket = 64, },
1095{ .hw_ep_num = 11, .style = FIFO_TX,   .maxpacket = 256, },
1096{ .hw_ep_num = 11, .style = FIFO_RX,   .maxpacket = 64, },
1097{ .hw_ep_num = 12, .style = FIFO_TX,   .maxpacket = 256, },
1098{ .hw_ep_num = 12, .style = FIFO_RX,   .maxpacket = 64, },
1099{ .hw_ep_num = 13, .style = FIFO_RXTX, .maxpacket = 4096, },
1100{ .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, },
1101{ .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, },
1102};
1103
1104/* mode 5 - fits in 8KB */
1105static struct musb_fifo_cfg __initdata mode_5_cfg[] = {
1106{ .hw_ep_num =  1, .style = FIFO_TX,   .maxpacket = 512, },
1107{ .hw_ep_num =  1, .style = FIFO_RX,   .maxpacket = 512, },
1108{ .hw_ep_num =  2, .style = FIFO_TX,   .maxpacket = 512, },
1109{ .hw_ep_num =  2, .style = FIFO_RX,   .maxpacket = 512, },
1110{ .hw_ep_num =  3, .style = FIFO_TX,   .maxpacket = 512, },
1111{ .hw_ep_num =  3, .style = FIFO_RX,   .maxpacket = 512, },
1112{ .hw_ep_num =  4, .style = FIFO_TX,   .maxpacket = 512, },
1113{ .hw_ep_num =  4, .style = FIFO_RX,   .maxpacket = 512, },
1114{ .hw_ep_num =  5, .style = FIFO_TX,   .maxpacket = 512, },
1115{ .hw_ep_num =  5, .style = FIFO_RX,   .maxpacket = 512, },
1116{ .hw_ep_num =  6, .style = FIFO_TX,   .maxpacket = 32, },
1117{ .hw_ep_num =  6, .style = FIFO_RX,   .maxpacket = 32, },
1118{ .hw_ep_num =  7, .style = FIFO_TX,   .maxpacket = 32, },
1119{ .hw_ep_num =  7, .style = FIFO_RX,   .maxpacket = 32, },
1120{ .hw_ep_num =  8, .style = FIFO_TX,   .maxpacket = 32, },
1121{ .hw_ep_num =  8, .style = FIFO_RX,   .maxpacket = 32, },
1122{ .hw_ep_num =  9, .style = FIFO_TX,   .maxpacket = 32, },
1123{ .hw_ep_num =  9, .style = FIFO_RX,   .maxpacket = 32, },
1124{ .hw_ep_num = 10, .style = FIFO_TX,   .maxpacket = 32, },
1125{ .hw_ep_num = 10, .style = FIFO_RX,   .maxpacket = 32, },
1126{ .hw_ep_num = 11, .style = FIFO_TX,   .maxpacket = 32, },
1127{ .hw_ep_num = 11, .style = FIFO_RX,   .maxpacket = 32, },
1128{ .hw_ep_num = 12, .style = FIFO_TX,   .maxpacket = 32, },
1129{ .hw_ep_num = 12, .style = FIFO_RX,   .maxpacket = 32, },
1130{ .hw_ep_num = 13, .style = FIFO_RXTX, .maxpacket = 512, },
1131{ .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, },
1132{ .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, },
1133};
1134
1135/*
1136 * configure a fifo; for non-shared endpoints, this may be called
1137 * once for a tx fifo and once for an rx fifo.
1138 *
1139 * returns negative errno or offset for next fifo.
1140 */
1141static int __init
1142fifo_setup(struct musb *musb, struct musb_hw_ep  *hw_ep,
1143		const struct musb_fifo_cfg *cfg, u16 offset)
1144{
1145	void __iomem	*mbase = musb->mregs;
1146	int	size = 0;
1147	u16	maxpacket = cfg->maxpacket;
1148	u16	c_off = offset >> 3;
1149	u8	c_size;
1150
1151	/* expect hw_ep has already been zero-initialized */
1152
1153	size = ffs(max(maxpacket, (u16) 8)) - 1;
1154	maxpacket = 1 << size;
1155
1156	c_size = size - 3;
1157	if (cfg->mode == BUF_DOUBLE) {
1158		if ((offset + (maxpacket << 1)) >
1159				(1 << (musb->config->ram_bits + 2)))
1160			return -EMSGSIZE;
1161		c_size |= MUSB_FIFOSZ_DPB;
1162	} else {
1163		if ((offset + maxpacket) > (1 << (musb->config->ram_bits + 2)))
1164			return -EMSGSIZE;
1165	}
1166
1167	/* configure the FIFO */
1168	musb_writeb(mbase, MUSB_INDEX, hw_ep->epnum);
1169
1170	/* EP0 reserved endpoint for control, bidirectional;
1171	 * EP1 reserved for bulk, two unidirection halves.
1172	 */
1173	if (hw_ep->epnum == 1)
1174		musb->bulk_ep = hw_ep;
1175	/* REVISIT error check:  be sure ep0 can both rx and tx ... */
1176	switch (cfg->style) {
1177	case FIFO_TX:
1178		musb_write_txfifosz(mbase, c_size);
1179		musb_write_txfifoadd(mbase, c_off);
1180		hw_ep->tx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
1181		hw_ep->max_packet_sz_tx = maxpacket;
1182		break;
1183	case FIFO_RX:
1184		musb_write_rxfifosz(mbase, c_size);
1185		musb_write_rxfifoadd(mbase, c_off);
1186		hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
1187		hw_ep->max_packet_sz_rx = maxpacket;
1188		break;
1189	case FIFO_RXTX:
1190		musb_write_txfifosz(mbase, c_size);
1191		musb_write_txfifoadd(mbase, c_off);
1192		hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
1193		hw_ep->max_packet_sz_rx = maxpacket;
1194
1195		musb_write_rxfifosz(mbase, c_size);
1196		musb_write_rxfifoadd(mbase, c_off);
1197		hw_ep->tx_double_buffered = hw_ep->rx_double_buffered;
1198		hw_ep->max_packet_sz_tx = maxpacket;
1199
1200		hw_ep->is_shared_fifo = true;
1201		break;
1202	}
1203
1204	/* NOTE rx and tx endpoint irqs aren't managed separately,
1205	 * which happens to be ok
1206	 */
1207	musb->epmask |= (1 << hw_ep->epnum);
1208
1209	return offset + (maxpacket << ((c_size & MUSB_FIFOSZ_DPB) ? 1 : 0));
1210}
1211
1212static struct musb_fifo_cfg __initdata ep0_cfg = {
1213	.style = FIFO_RXTX, .maxpacket = 64,
1214};
1215
1216static int __init ep_config_from_table(struct musb *musb)
1217{
1218	const struct musb_fifo_cfg	*cfg;
1219	unsigned		i, n;
1220	int			offset;
1221	struct musb_hw_ep	*hw_ep = musb->endpoints;
1222
1223	if (musb->config->fifo_cfg) {
1224		cfg = musb->config->fifo_cfg;
1225		n = musb->config->fifo_cfg_size;
1226		goto done;
1227	}
1228
1229	switch (fifo_mode) {
1230	default:
1231		fifo_mode = 0;
1232		/* FALLTHROUGH */
1233	case 0:
1234		cfg = mode_0_cfg;
1235		n = ARRAY_SIZE(mode_0_cfg);
1236		break;
1237	case 1:
1238		cfg = mode_1_cfg;
1239		n = ARRAY_SIZE(mode_1_cfg);
1240		break;
1241	case 2:
1242		cfg = mode_2_cfg;
1243		n = ARRAY_SIZE(mode_2_cfg);
1244		break;
1245	case 3:
1246		cfg = mode_3_cfg;
1247		n = ARRAY_SIZE(mode_3_cfg);
1248		break;
1249	case 4:
1250		cfg = mode_4_cfg;
1251		n = ARRAY_SIZE(mode_4_cfg);
1252		break;
1253	case 5:
1254		cfg = mode_5_cfg;
1255		n = ARRAY_SIZE(mode_5_cfg);
1256		break;
1257	}
1258
1259	printk(KERN_DEBUG "%s: setup fifo_mode %d\n",
1260			musb_driver_name, fifo_mode);
1261
1262
1263done:
1264	offset = fifo_setup(musb, hw_ep, &ep0_cfg, 0);
1265	/* assert(offset > 0) */
1266
1267	/* NOTE:  for RTL versions >= 1.400 EPINFO and RAMINFO would
1268	 * be better than static musb->config->num_eps and DYN_FIFO_SIZE...
1269	 */
1270
1271	for (i = 0; i < n; i++) {
1272		u8	epn = cfg->hw_ep_num;
1273
1274		if (epn >= musb->config->num_eps) {
1275			pr_debug("%s: invalid ep %d\n",
1276					musb_driver_name, epn);
1277			return -EINVAL;
1278		}
1279		offset = fifo_setup(musb, hw_ep + epn, cfg++, offset);
1280		if (offset < 0) {
1281			pr_debug("%s: mem overrun, ep %d\n",
1282					musb_driver_name, epn);
1283			return -EINVAL;
1284		}
1285		epn++;
1286		musb->nr_endpoints = max(epn, musb->nr_endpoints);
1287	}
1288
1289	printk(KERN_DEBUG "%s: %d/%d max ep, %d/%d memory\n",
1290			musb_driver_name,
1291			n + 1, musb->config->num_eps * 2 - 1,
1292			offset, (1 << (musb->config->ram_bits + 2)));
1293
1294	if (!musb->bulk_ep) {
1295		pr_debug("%s: missing bulk\n", musb_driver_name);
1296		return -EINVAL;
1297	}
1298
1299	return 0;
1300}
1301
1302
1303/*
1304 * ep_config_from_hw - when MUSB_C_DYNFIFO_DEF is false
1305 * @param musb the controller
1306 */
1307static int __init ep_config_from_hw(struct musb *musb)
1308{
1309	u8 epnum = 0;
1310	struct musb_hw_ep *hw_ep;
1311	void *mbase = musb->mregs;
1312	int ret = 0;
1313
1314	dev_dbg(musb->controller, "<== static silicon ep config\n");
1315
1316	/* FIXME pick up ep0 maxpacket size */
1317
1318	for (epnum = 1; epnum < musb->config->num_eps; epnum++) {
1319		musb_ep_select(mbase, epnum);
1320		hw_ep = musb->endpoints + epnum;
1321
1322		ret = musb_read_fifosize(musb, hw_ep, epnum);
1323		if (ret < 0)
1324			break;
1325
1326		/* FIXME set up hw_ep->{rx,tx}_double_buffered */
1327
1328		/* pick an RX/TX endpoint for bulk */
1329		if (hw_ep->max_packet_sz_tx < 512
1330				|| hw_ep->max_packet_sz_rx < 512)
1331			continue;
1332
1333		/* REVISIT:  this algorithm is lazy, we should at least
1334		 * try to pick a double buffered endpoint.
1335		 */
1336		if (musb->bulk_ep)
1337			continue;
1338		musb->bulk_ep = hw_ep;
1339	}
1340
1341	if (!musb->bulk_ep) {
1342		pr_debug("%s: missing bulk\n", musb_driver_name);
1343		return -EINVAL;
1344	}
1345
1346	return 0;
1347}
1348
1349enum { MUSB_CONTROLLER_MHDRC, MUSB_CONTROLLER_HDRC, };
1350
1351/* Initialize MUSB (M)HDRC part of the USB hardware subsystem;
1352 * configure endpoints, or take their config from silicon
1353 */
1354static int __init musb_core_init(u16 musb_type, struct musb *musb)
1355{
1356	u8 reg;
1357	char *type;
1358	char aInfo[90], aRevision[32], aDate[12];
1359	void __iomem	*mbase = musb->mregs;
1360	int		status = 0;
1361	int		i;
1362
1363	/* log core options (read using indexed model) */
1364	reg = musb_read_configdata(mbase);
1365
1366	strcpy(aInfo, (reg & MUSB_CONFIGDATA_UTMIDW) ? "UTMI-16" : "UTMI-8");
1367	if (reg & MUSB_CONFIGDATA_DYNFIFO) {
1368		strcat(aInfo, ", dyn FIFOs");
1369		musb->dyn_fifo = true;
1370	}
1371	if (reg & MUSB_CONFIGDATA_MPRXE) {
1372		strcat(aInfo, ", bulk combine");
1373		musb->bulk_combine = true;
1374	}
1375	if (reg & MUSB_CONFIGDATA_MPTXE) {
1376		strcat(aInfo, ", bulk split");
1377		musb->bulk_split = true;
1378	}
1379	if (reg & MUSB_CONFIGDATA_HBRXE) {
1380		strcat(aInfo, ", HB-ISO Rx");
1381		musb->hb_iso_rx = true;
1382	}
1383	if (reg & MUSB_CONFIGDATA_HBTXE) {
1384		strcat(aInfo, ", HB-ISO Tx");
1385		musb->hb_iso_tx = true;
1386	}
1387	if (reg & MUSB_CONFIGDATA_SOFTCONE)
1388		strcat(aInfo, ", SoftConn");
1389
1390	printk(KERN_DEBUG "%s: ConfigData=0x%02x (%s)\n",
1391			musb_driver_name, reg, aInfo);
1392
1393	aDate[0] = 0;
1394	if (MUSB_CONTROLLER_MHDRC == musb_type) {
1395		musb->is_multipoint = 1;
1396		type = "M";
1397	} else {
1398		musb->is_multipoint = 0;
1399		type = "";
1400#ifndef	CONFIG_USB_OTG_BLACKLIST_HUB
1401		printk(KERN_ERR
1402			"%s: kernel must blacklist external hubs\n",
1403			musb_driver_name);
1404#endif
1405	}
1406
1407	/* log release info */
1408	musb->hwvers = musb_read_hwvers(mbase);
1409	snprintf(aRevision, 32, "%d.%d%s", MUSB_HWVERS_MAJOR(musb->hwvers),
1410		MUSB_HWVERS_MINOR(musb->hwvers),
1411		(musb->hwvers & MUSB_HWVERS_RC) ? "RC" : "");
1412	printk(KERN_DEBUG "%s: %sHDRC RTL version %s %s\n",
1413			musb_driver_name, type, aRevision, aDate);
1414
1415	/* configure ep0 */
1416	musb_configure_ep0(musb);
1417
1418	/* discover endpoint configuration */
1419	musb->nr_endpoints = 1;
1420	musb->epmask = 1;
1421
1422	if (musb->dyn_fifo)
1423		status = ep_config_from_table(musb);
1424	else
1425		status = ep_config_from_hw(musb);
1426
1427	if (status < 0)
1428		return status;
1429
1430	/* finish init, and print endpoint config */
1431	for (i = 0; i < musb->nr_endpoints; i++) {
1432		struct musb_hw_ep	*hw_ep = musb->endpoints + i;
1433
1434		hw_ep->fifo = MUSB_FIFO_OFFSET(i) + mbase;
1435#ifdef CONFIG_USB_MUSB_TUSB6010
1436		hw_ep->fifo_async = musb->async + 0x400 + MUSB_FIFO_OFFSET(i);
1437		hw_ep->fifo_sync = musb->sync + 0x400 + MUSB_FIFO_OFFSET(i);
1438		hw_ep->fifo_sync_va =
1439			musb->sync_va + 0x400 + MUSB_FIFO_OFFSET(i);
 
 
 
1440
1441		if (i == 0)
1442			hw_ep->conf = mbase - 0x400 + TUSB_EP0_CONF;
1443		else
1444			hw_ep->conf = mbase + 0x400 + (((i - 1) & 0xf) << 2);
 
 
1445#endif
1446
1447		hw_ep->regs = MUSB_EP_OFFSET(i, 0) + mbase;
1448		hw_ep->target_regs = musb_read_target_reg_base(i, mbase);
1449		hw_ep->rx_reinit = 1;
1450		hw_ep->tx_reinit = 1;
1451
1452		if (hw_ep->max_packet_sz_tx) {
1453			dev_dbg(musb->controller,
1454				"%s: hw_ep %d%s, %smax %d\n",
1455				musb_driver_name, i,
1456				hw_ep->is_shared_fifo ? "shared" : "tx",
1457				hw_ep->tx_double_buffered
1458					? "doublebuffer, " : "",
1459				hw_ep->max_packet_sz_tx);
1460		}
1461		if (hw_ep->max_packet_sz_rx && !hw_ep->is_shared_fifo) {
1462			dev_dbg(musb->controller,
1463				"%s: hw_ep %d%s, %smax %d\n",
1464				musb_driver_name, i,
1465				"rx",
1466				hw_ep->rx_double_buffered
1467					? "doublebuffer, " : "",
1468				hw_ep->max_packet_sz_rx);
1469		}
1470		if (!(hw_ep->max_packet_sz_tx || hw_ep->max_packet_sz_rx))
1471			dev_dbg(musb->controller, "hw_ep %d not configured\n", i);
1472	}
1473
1474	return 0;
1475}
1476
1477/*-------------------------------------------------------------------------*/
1478
1479#if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_SOC_OMAP3430) || \
1480	defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_U8500) || \
1481	defined(CONFIG_ARCH_U5500)
1482
1483static irqreturn_t generic_interrupt(int irq, void *__hci)
1484{
1485	unsigned long	flags;
1486	irqreturn_t	retval = IRQ_NONE;
1487	struct musb	*musb = __hci;
1488
1489	spin_lock_irqsave(&musb->lock, flags);
1490
1491	musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
1492	musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
1493	musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
1494
1495	if (musb->int_usb || musb->int_tx || musb->int_rx)
1496		retval = musb_interrupt(musb);
1497
1498	spin_unlock_irqrestore(&musb->lock, flags);
1499
1500	return retval;
1501}
1502
1503#else
1504#define generic_interrupt	NULL
1505#endif
1506
1507/*
1508 * handle all the irqs defined by the HDRC core. for now we expect:  other
1509 * irq sources (phy, dma, etc) will be handled first, musb->int_* values
1510 * will be assigned, and the irq will already have been acked.
1511 *
1512 * called in irq context with spinlock held, irqs blocked
1513 */
1514irqreturn_t musb_interrupt(struct musb *musb)
1515{
1516	irqreturn_t	retval = IRQ_NONE;
1517	u8		devctl, power;
1518	int		ep_num;
1519	u32		reg;
 
 
 
1520
1521	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
1522	power = musb_readb(musb->mregs, MUSB_POWER);
1523
1524	dev_dbg(musb->controller, "** IRQ %s usb%04x tx%04x rx%04x\n",
1525		(devctl & MUSB_DEVCTL_HM) ? "host" : "peripheral",
1526		musb->int_usb, musb->int_tx, musb->int_rx);
1527
1528	/* the core can interrupt us for multiple reasons; docs have
1529	 * a generic interrupt flowchart to follow
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1530	 */
1531	if (musb->int_usb)
1532		retval |= musb_stage0_irq(musb, musb->int_usb,
1533				devctl, power);
1534
1535	/* "stage 1" is handling endpoint irqs */
 
1536
1537	/* handle endpoint 0 first */
1538	if (musb->int_tx & 1) {
1539		if (devctl & MUSB_DEVCTL_HM)
1540			retval |= musb_h_ep0_irq(musb);
1541		else
1542			retval |= musb_g_ep0_irq(musb);
 
 
 
1543	}
1544
1545	/* RX on endpoints 1-15 */
1546	reg = musb->int_rx >> 1;
1547	ep_num = 1;
1548	while (reg) {
1549		if (reg & 1) {
1550			/* musb_ep_select(musb->mregs, ep_num); */
1551			/* REVISIT just retval = ep->rx_irq(...) */
1552			retval = IRQ_HANDLED;
1553			if (devctl & MUSB_DEVCTL_HM) {
1554				if (is_host_capable())
1555					musb_host_rx(musb, ep_num);
1556			} else {
1557				if (is_peripheral_capable())
1558					musb_g_rx(musb, ep_num);
1559			}
1560		}
1561
1562		reg >>= 1;
1563		ep_num++;
 
 
 
 
1564	}
1565
1566	/* TX on endpoints 1-15 */
1567	reg = musb->int_tx >> 1;
1568	ep_num = 1;
1569	while (reg) {
1570		if (reg & 1) {
1571			/* musb_ep_select(musb->mregs, ep_num); */
1572			/* REVISIT just retval |= ep->tx_irq(...) */
1573			retval = IRQ_HANDLED;
1574			if (devctl & MUSB_DEVCTL_HM) {
1575				if (is_host_capable())
1576					musb_host_tx(musb, ep_num);
1577			} else {
1578				if (is_peripheral_capable())
1579					musb_g_tx(musb, ep_num);
1580			}
1581		}
1582		reg >>= 1;
1583		ep_num++;
1584	}
1585
1586	return retval;
1587}
1588EXPORT_SYMBOL_GPL(musb_interrupt);
1589
1590#ifndef CONFIG_MUSB_PIO_ONLY
1591static int __initdata use_dma = 1;
1592
1593/* "modprobe ... use_dma=0" etc */
1594module_param(use_dma, bool, 0);
1595MODULE_PARM_DESC(use_dma, "enable/disable use of DMA");
1596
1597void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit)
1598{
1599	u8	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
1600
1601	/* called with controller lock already held */
1602
1603	if (!epnum) {
1604#ifndef CONFIG_USB_TUSB_OMAP_DMA
1605		if (!is_cppi_enabled()) {
1606			/* endpoint 0 */
1607			if (devctl & MUSB_DEVCTL_HM)
1608				musb_h_ep0_irq(musb);
1609			else
1610				musb_g_ep0_irq(musb);
1611		}
1612#endif
1613	} else {
1614		/* endpoints 1..15 */
1615		if (transmit) {
1616			if (devctl & MUSB_DEVCTL_HM) {
1617				if (is_host_capable())
1618					musb_host_tx(musb, epnum);
1619			} else {
1620				if (is_peripheral_capable())
1621					musb_g_tx(musb, epnum);
1622			}
1623		} else {
1624			/* receive */
1625			if (devctl & MUSB_DEVCTL_HM) {
1626				if (is_host_capable())
1627					musb_host_rx(musb, epnum);
1628			} else {
1629				if (is_peripheral_capable())
1630					musb_g_rx(musb, epnum);
1631			}
1632		}
1633	}
1634}
 
1635
1636#else
1637#define use_dma			0
1638#endif
1639
1640/*-------------------------------------------------------------------------*/
1641
1642#ifdef CONFIG_SYSFS
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1643
1644static ssize_t
1645musb_mode_show(struct device *dev, struct device_attribute *attr, char *buf)
1646{
1647	struct musb *musb = dev_to_musb(dev);
1648	unsigned long flags;
1649	int ret = -EINVAL;
1650
1651	spin_lock_irqsave(&musb->lock, flags);
1652	ret = sprintf(buf, "%s\n", otg_state_string(musb->xceiv->state));
1653	spin_unlock_irqrestore(&musb->lock, flags);
1654
1655	return ret;
1656}
1657
1658static ssize_t
1659musb_mode_store(struct device *dev, struct device_attribute *attr,
1660		const char *buf, size_t n)
1661{
1662	struct musb	*musb = dev_to_musb(dev);
1663	unsigned long	flags;
1664	int		status;
1665
1666	spin_lock_irqsave(&musb->lock, flags);
1667	if (sysfs_streq(buf, "host"))
1668		status = musb_platform_set_mode(musb, MUSB_HOST);
1669	else if (sysfs_streq(buf, "peripheral"))
1670		status = musb_platform_set_mode(musb, MUSB_PERIPHERAL);
1671	else if (sysfs_streq(buf, "otg"))
1672		status = musb_platform_set_mode(musb, MUSB_OTG);
1673	else
1674		status = -EINVAL;
1675	spin_unlock_irqrestore(&musb->lock, flags);
1676
1677	return (status == 0) ? n : status;
1678}
1679static DEVICE_ATTR(mode, 0644, musb_mode_show, musb_mode_store);
1680
1681static ssize_t
1682musb_vbus_store(struct device *dev, struct device_attribute *attr,
1683		const char *buf, size_t n)
1684{
1685	struct musb	*musb = dev_to_musb(dev);
1686	unsigned long	flags;
1687	unsigned long	val;
1688
1689	if (sscanf(buf, "%lu", &val) < 1) {
1690		dev_err(dev, "Invalid VBUS timeout ms value\n");
1691		return -EINVAL;
1692	}
1693
1694	spin_lock_irqsave(&musb->lock, flags);
1695	/* force T(a_wait_bcon) to be zero/unlimited *OR* valid */
1696	musb->a_wait_bcon = val ? max_t(int, val, OTG_TIME_A_WAIT_BCON) : 0 ;
1697	if (musb->xceiv->state == OTG_STATE_A_WAIT_BCON)
1698		musb->is_active = 0;
1699	musb_platform_try_idle(musb, jiffies + msecs_to_jiffies(val));
1700	spin_unlock_irqrestore(&musb->lock, flags);
1701
1702	return n;
1703}
1704
1705static ssize_t
1706musb_vbus_show(struct device *dev, struct device_attribute *attr, char *buf)
1707{
1708	struct musb	*musb = dev_to_musb(dev);
1709	unsigned long	flags;
1710	unsigned long	val;
1711	int		vbus;
 
1712
 
1713	spin_lock_irqsave(&musb->lock, flags);
1714	val = musb->a_wait_bcon;
1715	/* FIXME get_vbus_status() is normally #defined as false...
1716	 * and is effectively TUSB-specific.
1717	 */
1718	vbus = musb_platform_get_vbus_status(musb);
 
 
 
 
 
 
 
 
 
1719	spin_unlock_irqrestore(&musb->lock, flags);
 
1720
1721	return sprintf(buf, "Vbus %s, timeout %lu msec\n",
1722			vbus ? "on" : "off", val);
1723}
1724static DEVICE_ATTR(vbus, 0644, musb_vbus_show, musb_vbus_store);
1725
1726/* Gadget drivers can't know that a host is connected so they might want
1727 * to start SRP, but users can.  This allows userspace to trigger SRP.
1728 */
1729static ssize_t
1730musb_srp_store(struct device *dev, struct device_attribute *attr,
1731		const char *buf, size_t n)
1732{
1733	struct musb	*musb = dev_to_musb(dev);
1734	unsigned short	srp;
1735
1736	if (sscanf(buf, "%hu", &srp) != 1
1737			|| (srp != 1)) {
1738		dev_err(dev, "SRP: Value must be 1\n");
1739		return -EINVAL;
1740	}
1741
1742	if (srp == 1)
1743		musb_g_wakeup(musb);
1744
1745	return n;
1746}
1747static DEVICE_ATTR(srp, 0644, NULL, musb_srp_store);
1748
1749static struct attribute *musb_attributes[] = {
1750	&dev_attr_mode.attr,
1751	&dev_attr_vbus.attr,
1752	&dev_attr_srp.attr,
1753	NULL
1754};
1755
1756static const struct attribute_group musb_attr_group = {
1757	.attrs = musb_attributes,
1758};
1759
1760#endif	/* sysfs */
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1761
1762/* Only used to provide driver mode change events */
1763static void musb_irq_work(struct work_struct *data)
1764{
1765	struct musb *musb = container_of(data, struct musb, irq_work);
1766	static int old_state;
 
 
 
 
 
 
 
1767
1768	if (musb->xceiv->state != old_state) {
1769		old_state = musb->xceiv->state;
 
 
1770		sysfs_notify(&musb->controller->kobj, NULL, "mode");
1771	}
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1772}
1773
1774/* --------------------------------------------------------------------------
1775 * Init support
1776 */
1777
1778static struct musb *__init
1779allocate_instance(struct device *dev,
1780		struct musb_hdrc_config *config, void __iomem *mbase)
1781{
1782	struct musb		*musb;
1783	struct musb_hw_ep	*ep;
1784	int			epnum;
1785	struct usb_hcd	*hcd;
1786
1787	hcd = usb_create_hcd(&musb_hc_driver, dev, dev_name(dev));
1788	if (!hcd)
1789		return NULL;
1790	/* usbcore sets dev->driver_data to hcd, and sometimes uses that... */
1791
1792	musb = hcd_to_musb(hcd);
1793	INIT_LIST_HEAD(&musb->control);
1794	INIT_LIST_HEAD(&musb->in_bulk);
1795	INIT_LIST_HEAD(&musb->out_bulk);
1796
1797	hcd->uses_new_polling = 1;
1798	hcd->has_tt = 1;
1799
1800	musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
1801	musb->a_wait_bcon = OTG_TIME_A_WAIT_BCON;
1802	dev_set_drvdata(dev, musb);
1803	musb->mregs = mbase;
1804	musb->ctrl_base = mbase;
1805	musb->nIrq = -ENODEV;
1806	musb->config = config;
1807	BUG_ON(musb->config->num_eps > MUSB_C_NUM_EPS);
1808	for (epnum = 0, ep = musb->endpoints;
1809			epnum < musb->config->num_eps;
1810			epnum++, ep++) {
1811		ep->musb = musb;
1812		ep->epnum = epnum;
1813	}
1814
1815	musb->controller = dev;
1816
 
 
 
 
 
 
1817	return musb;
 
 
 
1818}
1819
1820static void musb_free(struct musb *musb)
1821{
1822	/* this has multiple entry modes. it handles fault cleanup after
1823	 * probe(), where things may be partially set up, as well as rmmod
1824	 * cleanup after everything's been de-activated.
1825	 */
1826
1827#ifdef CONFIG_SYSFS
1828	sysfs_remove_group(&musb->controller->kobj, &musb_attr_group);
1829#endif
1830
1831	musb_gadget_cleanup(musb);
1832
1833	if (musb->nIrq >= 0) {
1834		if (musb->irq_wake)
1835			disable_irq_wake(musb->nIrq);
1836		free_irq(musb->nIrq, musb);
1837	}
1838	if (is_dma_capable() && musb->dma_controller) {
1839		struct dma_controller	*c = musb->dma_controller;
1840
1841		(void) c->stop(c);
1842		dma_controller_destroy(c);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1843	}
 
 
 
 
 
 
 
 
 
 
 
 
1844
1845	kfree(musb);
 
 
 
 
 
1846}
1847
1848/*
1849 * Perform generic per-controller initialization.
1850 *
1851 * @pDevice: the controller (already clocked, etc)
1852 * @nIrq: irq
1853 * @mregs: virtual address of controller registers,
1854 *	not yet corrected for platform-specific offsets
1855 */
1856static int __init
1857musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
1858{
1859	int			status;
1860	struct musb		*musb;
1861	struct musb_hdrc_platform_data *plat = dev->platform_data;
1862
1863	/* The driver might handle more features than the board; OK.
1864	 * Fail when the board needs a feature that's not enabled.
1865	 */
1866	if (!plat) {
1867		dev_dbg(dev, "no platform_data?\n");
1868		status = -ENODEV;
1869		goto fail0;
1870	}
1871
1872	/* allocate */
1873	musb = allocate_instance(dev, plat->config, ctrl);
1874	if (!musb) {
1875		status = -ENOMEM;
1876		goto fail0;
1877	}
1878
1879	pm_runtime_use_autosuspend(musb->controller);
1880	pm_runtime_set_autosuspend_delay(musb->controller, 200);
1881	pm_runtime_enable(musb->controller);
1882
1883	spin_lock_init(&musb->lock);
1884	musb->board_mode = plat->mode;
1885	musb->board_set_power = plat->set_power;
1886	musb->min_power = plat->min_power;
1887	musb->ops = plat->platform_ops;
 
 
 
 
 
 
 
 
 
 
 
 
 
1888
1889	/* The musb_platform_init() call:
1890	 *   - adjusts musb->mregs and musb->isr if needed,
1891	 *   - may initialize an integrated tranceiver
1892	 *   - initializes musb->xceiv, usually by otg_get_transceiver()
 
1893	 *   - stops powering VBUS
1894	 *
1895	 * There are various transceiver configurations.  Blackfin,
1896	 * DaVinci, TUSB60x0, and others integrate them.  OMAP3 uses
1897	 * external/discrete ones in various flavors (twl4030 family,
1898	 * isp1504, non-OTG, etc) mostly hooking up through ULPI.
1899	 */
1900	musb->isr = generic_interrupt;
1901	status = musb_platform_init(musb);
1902	if (status < 0)
1903		goto fail1;
1904
1905	if (!musb->isr) {
1906		status = -ENODEV;
1907		goto fail3;
 
 
 
 
 
 
 
 
 
 
 
 
1908	}
1909
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1910	if (!musb->xceiv->io_ops) {
 
1911		musb->xceiv->io_priv = musb->mregs;
1912		musb->xceiv->io_ops = &musb_ulpi_access;
1913	}
1914
1915#ifndef CONFIG_MUSB_PIO_ONLY
1916	if (use_dma && dev->dma_mask) {
1917		struct dma_controller	*c;
 
 
 
 
 
 
 
 
 
 
 
1918
1919		c = dma_controller_create(musb, musb->mregs);
1920		musb->dma_controller = c;
1921		if (c)
1922			(void) c->start(c);
 
 
 
 
 
 
 
1923	}
1924#endif
1925	/* ideally this would be abstracted in platform setup */
1926	if (!is_dma_capable() || !musb->dma_controller)
1927		dev->dma_mask = NULL;
1928
1929	/* be sure interrupts are disabled before connecting ISR */
1930	musb_platform_disable(musb);
1931	musb_generic_disable(musb);
 
 
 
 
 
 
1932
1933	/* setup musb parts of the core (especially endpoints) */
1934	status = musb_core_init(plat->config->multipoint
1935			? MUSB_CONTROLLER_MHDRC
1936			: MUSB_CONTROLLER_HDRC, musb);
1937	if (status < 0)
1938		goto fail3;
1939
1940	setup_timer(&musb->otg_timer, musb_otg_timer_func, (unsigned long) musb);
1941
1942	/* Init IRQ workqueue before request_irq */
1943	INIT_WORK(&musb->irq_work, musb_irq_work);
1944
1945	/* attach to the IRQ */
1946	if (request_irq(nIrq, musb->isr, 0, dev_name(dev), musb)) {
1947		dev_err(dev, "request_irq %d failed!\n", nIrq);
1948		status = -ENODEV;
1949		goto fail3;
1950	}
1951	musb->nIrq = nIrq;
1952/* FIXME this handles wakeup irqs wrong */
1953	if (enable_irq_wake(nIrq) == 0) {
1954		musb->irq_wake = 1;
1955		device_init_wakeup(dev, 1);
1956	} else {
1957		musb->irq_wake = 0;
1958	}
1959
1960	/* host side needs more setup */
1961	if (is_host_enabled(musb)) {
1962		struct usb_hcd	*hcd = musb_to_hcd(musb);
1963
1964		otg_set_host(musb->xceiv, &hcd->self);
1965
1966		if (is_otg_enabled(musb))
1967			hcd->self.otg_port = 1;
1968		musb->xceiv->host = &hcd->self;
1969		hcd->power_budget = 2 * (plat->power ? : 250);
1970
1971		/* program PHY to use external vBus if required */
1972		if (plat->extvbus) {
1973			u8 busctl = musb_read_ulpi_buscontrol(musb->mregs);
1974			busctl |= MUSB_ULPI_USE_EXTVBUS;
1975			musb_write_ulpi_buscontrol(musb->mregs, busctl);
1976		}
1977	}
1978
1979	/* For the host-only role, we can activate right away.
1980	 * (We expect the ID pin to be forcibly grounded!!)
1981	 * Otherwise, wait till the gadget driver hooks up.
1982	 */
1983	if (!is_otg_enabled(musb) && is_host_enabled(musb)) {
1984		struct usb_hcd	*hcd = musb_to_hcd(musb);
1985
1986		MUSB_HST_MODE(musb);
1987		musb->xceiv->default_a = 1;
1988		musb->xceiv->state = OTG_STATE_A_IDLE;
1989
1990		status = usb_add_hcd(musb_to_hcd(musb), -1, 0);
1991
1992		hcd->self.uses_pio_for_control = 1;
1993		dev_dbg(musb->controller, "%s mode, status %d, devctl %02x %c\n",
1994			"HOST", status,
1995			musb_readb(musb->mregs, MUSB_DEVCTL),
1996			(musb_readb(musb->mregs, MUSB_DEVCTL)
1997					& MUSB_DEVCTL_BDEVICE
1998				? 'B' : 'A'));
1999
2000	} else /* peripheral is enabled */ {
2001		MUSB_DEV_MODE(musb);
2002		musb->xceiv->default_a = 0;
2003		musb->xceiv->state = OTG_STATE_B_IDLE;
2004
 
 
 
 
 
 
 
 
2005		status = musb_gadget_setup(musb);
2006
2007		dev_dbg(musb->controller, "%s mode, status %d, dev%02x\n",
2008			is_otg_enabled(musb) ? "OTG" : "PERIPHERAL",
2009			status,
2010			musb_readb(musb->mregs, MUSB_DEVCTL));
2011
 
 
 
 
 
 
 
 
 
 
 
 
2012	}
 
2013	if (status < 0)
2014		goto fail3;
2015
2016	pm_runtime_put(musb->controller);
2017
2018	status = musb_init_debugfs(musb);
2019	if (status < 0)
2020		goto fail4;
2021
2022#ifdef CONFIG_SYSFS
2023	status = sysfs_create_group(&musb->controller->kobj, &musb_attr_group);
2024	if (status)
2025		goto fail5;
2026#endif
2027
2028	dev_info(dev, "USB %s mode controller at %p using %s, IRQ %d\n",
2029			({char *s;
2030			 switch (musb->board_mode) {
2031			 case MUSB_HOST:		s = "Host"; break;
2032			 case MUSB_PERIPHERAL:	s = "Peripheral"; break;
2033			 default:		s = "OTG"; break;
2034			 }; s; }),
2035			ctrl,
2036			(is_dma_capable() && musb->dma_controller)
2037			? "DMA" : "PIO",
2038			musb->nIrq);
2039
2040	return 0;
2041
2042fail5:
2043	musb_exit_debugfs(musb);
2044
2045fail4:
2046	if (!is_otg_enabled(musb) && is_host_enabled(musb))
2047		usb_remove_hcd(musb_to_hcd(musb));
2048	else
2049		musb_gadget_cleanup(musb);
2050
2051fail3:
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2052	if (musb->irq_wake)
2053		device_init_wakeup(dev, 0);
2054	musb_platform_exit(musb);
2055
2056fail1:
2057	dev_err(musb->controller,
2058		"musb_init_controller failed with status %d\n", status);
 
2059
2060	musb_free(musb);
2061
2062fail0:
2063
2064	return status;
2065
2066}
2067
2068/*-------------------------------------------------------------------------*/
2069
2070/* all implementations (PCI bridge to FPGA, VLYNQ, etc) should just
2071 * bridge to a platform device; this driver then suffices.
2072 */
2073
2074#ifndef CONFIG_MUSB_PIO_ONLY
2075static u64	*orig_dma_mask;
2076#endif
2077
2078static int __init musb_probe(struct platform_device *pdev)
2079{
2080	struct device	*dev = &pdev->dev;
2081	int		irq = platform_get_irq_byname(pdev, "mc");
2082	int		status;
2083	struct resource	*iomem;
2084	void __iomem	*base;
2085
2086	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
2087	if (!iomem || irq <= 0)
2088		return -ENODEV;
2089
2090	base = ioremap(iomem->start, resource_size(iomem));
2091	if (!base) {
2092		dev_err(dev, "ioremap failed\n");
2093		return -ENOMEM;
2094	}
2095
2096#ifndef CONFIG_MUSB_PIO_ONLY
2097	/* clobbered by use_dma=n */
2098	orig_dma_mask = dev->dma_mask;
2099#endif
2100	status = musb_init_controller(dev, irq, base);
2101	if (status < 0)
2102		iounmap(base);
2103
2104	return status;
2105}
2106
2107static int __exit musb_remove(struct platform_device *pdev)
2108{
2109	struct musb	*musb = dev_to_musb(&pdev->dev);
2110	void __iomem	*ctrl_base = musb->ctrl_base;
 
2111
2112	/* this gets called on rmmod.
2113	 *  - Host mode: host may still be active
2114	 *  - Peripheral mode: peripheral is deactivated (or never-activated)
2115	 *  - OTG mode: both roles are deactivated (or never-activated)
2116	 */
2117	pm_runtime_get_sync(musb->controller);
2118	musb_exit_debugfs(musb);
2119	musb_shutdown(pdev);
2120
2121	pm_runtime_put(musb->controller);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2122	musb_free(musb);
2123	iounmap(ctrl_base);
2124	device_init_wakeup(&pdev->dev, 0);
2125#ifndef CONFIG_MUSB_PIO_ONLY
2126	pdev->dev.dma_mask = orig_dma_mask;
2127#endif
2128	return 0;
2129}
2130
2131#ifdef	CONFIG_PM
2132
2133static void musb_save_context(struct musb *musb)
2134{
2135	int i;
2136	void __iomem *musb_base = musb->mregs;
2137	void __iomem *epio;
2138
2139	if (is_host_enabled(musb)) {
2140		musb->context.frame = musb_readw(musb_base, MUSB_FRAME);
2141		musb->context.testmode = musb_readb(musb_base, MUSB_TESTMODE);
2142		musb->context.busctl = musb_read_ulpi_buscontrol(musb->mregs);
2143	}
2144	musb->context.power = musb_readb(musb_base, MUSB_POWER);
2145	musb->context.intrtxe = musb_readw(musb_base, MUSB_INTRTXE);
2146	musb->context.intrrxe = musb_readw(musb_base, MUSB_INTRRXE);
2147	musb->context.intrusbe = musb_readb(musb_base, MUSB_INTRUSBE);
2148	musb->context.index = musb_readb(musb_base, MUSB_INDEX);
2149	musb->context.devctl = musb_readb(musb_base, MUSB_DEVCTL);
2150
2151	for (i = 0; i < musb->config->num_eps; ++i) {
2152		struct musb_hw_ep	*hw_ep;
2153
2154		hw_ep = &musb->endpoints[i];
2155		if (!hw_ep)
2156			continue;
2157
2158		epio = hw_ep->regs;
2159		if (!epio)
2160			continue;
2161
 
2162		musb->context.index_regs[i].txmaxp =
2163			musb_readw(epio, MUSB_TXMAXP);
2164		musb->context.index_regs[i].txcsr =
2165			musb_readw(epio, MUSB_TXCSR);
2166		musb->context.index_regs[i].rxmaxp =
2167			musb_readw(epio, MUSB_RXMAXP);
2168		musb->context.index_regs[i].rxcsr =
2169			musb_readw(epio, MUSB_RXCSR);
2170
2171		if (musb->dyn_fifo) {
2172			musb->context.index_regs[i].txfifoadd =
2173					musb_read_txfifoadd(musb_base);
2174			musb->context.index_regs[i].rxfifoadd =
2175					musb_read_rxfifoadd(musb_base);
2176			musb->context.index_regs[i].txfifosz =
2177					musb_read_txfifosz(musb_base);
2178			musb->context.index_regs[i].rxfifosz =
2179					musb_read_rxfifosz(musb_base);
2180		}
2181		if (is_host_enabled(musb)) {
2182			musb->context.index_regs[i].txtype =
2183				musb_readb(epio, MUSB_TXTYPE);
2184			musb->context.index_regs[i].txinterval =
2185				musb_readb(epio, MUSB_TXINTERVAL);
2186			musb->context.index_regs[i].rxtype =
2187				musb_readb(epio, MUSB_RXTYPE);
2188			musb->context.index_regs[i].rxinterval =
2189				musb_readb(epio, MUSB_RXINTERVAL);
2190
2191			musb->context.index_regs[i].txfunaddr =
2192				musb_read_txfunaddr(musb_base, i);
2193			musb->context.index_regs[i].txhubaddr =
2194				musb_read_txhubaddr(musb_base, i);
2195			musb->context.index_regs[i].txhubport =
2196				musb_read_txhubport(musb_base, i);
2197
2198			musb->context.index_regs[i].rxfunaddr =
2199				musb_read_rxfunaddr(musb_base, i);
2200			musb->context.index_regs[i].rxhubaddr =
2201				musb_read_rxhubaddr(musb_base, i);
2202			musb->context.index_regs[i].rxhubport =
2203				musb_read_rxhubport(musb_base, i);
2204		}
2205	}
2206}
2207
2208static void musb_restore_context(struct musb *musb)
2209{
2210	int i;
2211	void __iomem *musb_base = musb->mregs;
2212	void __iomem *ep_target_regs;
2213	void __iomem *epio;
 
2214
2215	if (is_host_enabled(musb)) {
2216		musb_writew(musb_base, MUSB_FRAME, musb->context.frame);
2217		musb_writeb(musb_base, MUSB_TESTMODE, musb->context.testmode);
2218		musb_write_ulpi_buscontrol(musb->mregs, musb->context.busctl);
2219	}
2220	musb_writeb(musb_base, MUSB_POWER, musb->context.power);
2221	musb_writew(musb_base, MUSB_INTRTXE, musb->context.intrtxe);
2222	musb_writew(musb_base, MUSB_INTRRXE, musb->context.intrrxe);
 
 
 
 
 
2223	musb_writeb(musb_base, MUSB_INTRUSBE, musb->context.intrusbe);
2224	musb_writeb(musb_base, MUSB_DEVCTL, musb->context.devctl);
 
2225
2226	for (i = 0; i < musb->config->num_eps; ++i) {
2227		struct musb_hw_ep	*hw_ep;
2228
2229		hw_ep = &musb->endpoints[i];
2230		if (!hw_ep)
2231			continue;
2232
2233		epio = hw_ep->regs;
2234		if (!epio)
2235			continue;
2236
 
2237		musb_writew(epio, MUSB_TXMAXP,
2238			musb->context.index_regs[i].txmaxp);
2239		musb_writew(epio, MUSB_TXCSR,
2240			musb->context.index_regs[i].txcsr);
2241		musb_writew(epio, MUSB_RXMAXP,
2242			musb->context.index_regs[i].rxmaxp);
2243		musb_writew(epio, MUSB_RXCSR,
2244			musb->context.index_regs[i].rxcsr);
2245
2246		if (musb->dyn_fifo) {
2247			musb_write_txfifosz(musb_base,
2248				musb->context.index_regs[i].txfifosz);
2249			musb_write_rxfifosz(musb_base,
2250				musb->context.index_regs[i].rxfifosz);
2251			musb_write_txfifoadd(musb_base,
2252				musb->context.index_regs[i].txfifoadd);
2253			musb_write_rxfifoadd(musb_base,
2254				musb->context.index_regs[i].rxfifoadd);
2255		}
2256
2257		if (is_host_enabled(musb)) {
2258			musb_writeb(epio, MUSB_TXTYPE,
2259				musb->context.index_regs[i].txtype);
2260			musb_writeb(epio, MUSB_TXINTERVAL,
2261				musb->context.index_regs[i].txinterval);
2262			musb_writeb(epio, MUSB_RXTYPE,
2263				musb->context.index_regs[i].rxtype);
2264			musb_writeb(epio, MUSB_RXINTERVAL,
2265
2266			musb->context.index_regs[i].rxinterval);
2267			musb_write_txfunaddr(musb_base, i,
2268				musb->context.index_regs[i].txfunaddr);
2269			musb_write_txhubaddr(musb_base, i,
2270				musb->context.index_regs[i].txhubaddr);
2271			musb_write_txhubport(musb_base, i,
2272				musb->context.index_regs[i].txhubport);
2273
2274			ep_target_regs =
2275				musb_read_target_reg_base(i, musb_base);
2276
2277			musb_write_rxfunaddr(ep_target_regs,
2278				musb->context.index_regs[i].rxfunaddr);
2279			musb_write_rxhubaddr(ep_target_regs,
2280				musb->context.index_regs[i].rxhubaddr);
2281			musb_write_rxhubport(ep_target_regs,
2282				musb->context.index_regs[i].rxhubport);
2283		}
2284	}
2285	musb_writeb(musb_base, MUSB_INDEX, musb->context.index);
2286}
2287
2288static int musb_suspend(struct device *dev)
2289{
2290	struct musb	*musb = dev_to_musb(dev);
2291	unsigned long	flags;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2292
2293	spin_lock_irqsave(&musb->lock, flags);
2294
2295	if (is_peripheral_active(musb)) {
2296		/* FIXME force disconnect unless we know USB will wake
2297		 * the system up quickly enough to respond ...
2298		 */
2299	} else if (is_host_active(musb)) {
2300		/* we know all the children are suspended; sometimes
2301		 * they will even be wakeup-enabled.
2302		 */
2303	}
2304
2305	musb_save_context(musb);
2306
2307	spin_unlock_irqrestore(&musb->lock, flags);
2308	return 0;
2309}
2310
2311static int musb_resume_noirq(struct device *dev)
2312{
2313	struct musb	*musb = dev_to_musb(dev);
2314
2315	musb_restore_context(musb);
 
 
2316
2317	/* for static cmos like DaVinci, register values were preserved
 
2318	 * unless for some reason the whole soc powered down or the USB
2319	 * module got reset through the PSC (vs just being disabled).
 
 
 
 
2320	 */
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2321	return 0;
2322}
2323
2324static int musb_runtime_suspend(struct device *dev)
2325{
2326	struct musb	*musb = dev_to_musb(dev);
2327
2328	musb_save_context(musb);
 
2329
2330	return 0;
2331}
2332
2333static int musb_runtime_resume(struct device *dev)
2334{
2335	struct musb	*musb = dev_to_musb(dev);
2336	static int	first = 1;
 
2337
2338	/*
2339	 * When pm_runtime_get_sync called for the first time in driver
2340	 * init,  some of the structure is still not initialized which is
2341	 * used in restore function. But clock needs to be
2342	 * enabled before any register access, so
2343	 * pm_runtime_get_sync has to be called.
2344	 * Also context restore without save does not make
2345	 * any sense
2346	 */
2347	if (!first)
2348		musb_restore_context(musb);
2349	first = 0;
 
 
 
 
 
 
 
 
 
2350
2351	return 0;
2352}
2353
2354static const struct dev_pm_ops musb_dev_pm_ops = {
2355	.suspend	= musb_suspend,
2356	.resume_noirq	= musb_resume_noirq,
2357	.runtime_suspend = musb_runtime_suspend,
2358	.runtime_resume = musb_runtime_resume,
2359};
2360
2361#define MUSB_DEV_PM_OPS (&musb_dev_pm_ops)
2362#else
2363#define	MUSB_DEV_PM_OPS	NULL
2364#endif
2365
2366static struct platform_driver musb_driver = {
2367	.driver = {
2368		.name		= (char *)musb_driver_name,
2369		.bus		= &platform_bus_type,
2370		.owner		= THIS_MODULE,
2371		.pm		= MUSB_DEV_PM_OPS,
2372	},
2373	.remove		= __exit_p(musb_remove),
2374	.shutdown	= musb_shutdown,
2375};
2376
2377/*-------------------------------------------------------------------------*/
2378
2379static int __init musb_init(void)
2380{
2381	if (usb_disabled())
2382		return 0;
2383
2384	pr_info("%s: version " MUSB_VERSION ", "
2385		"?dma?"
2386		", "
2387		"otg (peripheral+host)",
2388		musb_driver_name);
2389	return platform_driver_probe(&musb_driver, musb_probe);
2390}
2391
2392/* make us init after usbcore and i2c (transceivers, regulators, etc)
2393 * and before usb gadget and host-side drivers start to register
2394 */
2395fs_initcall(musb_init);
2396
2397static void __exit musb_cleanup(void)
2398{
2399	platform_driver_unregister(&musb_driver);
2400}
2401module_exit(musb_cleanup);