Linux Audio

Check our new training course

Loading...
v3.1
  1/*
  2 * RTC subsystem, base class
  3 *
  4 * Copyright (C) 2005 Tower Technologies
  5 * Author: Alessandro Zummo <a.zummo@towertech.it>
  6 *
  7 * class skeleton from drivers/hwmon/hwmon.c
  8 *
  9 * This program is free software; you can redistribute it and/or modify
 10 * it under the terms of the GNU General Public License version 2 as
 11 * published by the Free Software Foundation.
 12*/
 13
 
 
 14#include <linux/module.h>
 
 15#include <linux/rtc.h>
 16#include <linux/kdev_t.h>
 17#include <linux/idr.h>
 18#include <linux/slab.h>
 19#include <linux/workqueue.h>
 20
 21#include "rtc-core.h"
 22
 23
 24static DEFINE_IDR(rtc_idr);
 25static DEFINE_MUTEX(idr_lock);
 26struct class *rtc_class;
 27
 28static void rtc_device_release(struct device *dev)
 29{
 30	struct rtc_device *rtc = to_rtc_device(dev);
 31	mutex_lock(&idr_lock);
 32	idr_remove(&rtc_idr, rtc->id);
 33	mutex_unlock(&idr_lock);
 34	kfree(rtc);
 35}
 36
 37#if defined(CONFIG_PM) && defined(CONFIG_RTC_HCTOSYS_DEVICE)
 
 
 
 38
 
 39/*
 40 * On suspend(), measure the delta between one RTC and the
 41 * system's wall clock; restore it on resume().
 42 */
 43
 44static struct timespec old_rtc, old_system, old_delta;
 45
 46
 47static int rtc_suspend(struct device *dev, pm_message_t mesg)
 48{
 49	struct rtc_device	*rtc = to_rtc_device(dev);
 50	struct rtc_time		tm;
 51	struct timespec		delta, delta_delta;
 
 
 
 
 
 52	if (strcmp(dev_name(&rtc->dev), CONFIG_RTC_HCTOSYS_DEVICE) != 0)
 53		return 0;
 54
 55	/* snapshot the current RTC and system time at suspend*/
 56	rtc_read_time(rtc, &tm);
 57	getnstimeofday(&old_system);
 58	rtc_tm_to_time(&tm, &old_rtc.tv_sec);
 
 
 
 
 
 59
 60
 61	/*
 62	 * To avoid drift caused by repeated suspend/resumes,
 63	 * which each can add ~1 second drift error,
 64	 * try to compensate so the difference in system time
 65	 * and rtc time stays close to constant.
 66	 */
 67	delta = timespec_sub(old_system, old_rtc);
 68	delta_delta = timespec_sub(delta, old_delta);
 69	if (abs(delta_delta.tv_sec)  >= 2) {
 70		/*
 71		 * if delta_delta is too large, assume time correction
 72		 * has occured and set old_delta to the current delta.
 73		 */
 74		old_delta = delta;
 75	} else {
 76		/* Otherwise try to adjust old_system to compensate */
 77		old_system = timespec_sub(old_system, delta_delta);
 78	}
 79
 80	return 0;
 81}
 82
 83static int rtc_resume(struct device *dev)
 84{
 85	struct rtc_device	*rtc = to_rtc_device(dev);
 86	struct rtc_time		tm;
 87	struct timespec		new_system, new_rtc;
 88	struct timespec		sleep_time;
 
 
 
 
 89
 
 90	if (strcmp(dev_name(&rtc->dev), CONFIG_RTC_HCTOSYS_DEVICE) != 0)
 91		return 0;
 92
 93	/* snapshot the current rtc and system time at resume */
 94	getnstimeofday(&new_system);
 95	rtc_read_time(rtc, &tm);
 96	if (rtc_valid_tm(&tm) != 0) {
 97		pr_debug("%s:  bogus resume time\n", dev_name(&rtc->dev));
 98		return 0;
 99	}
100	rtc_tm_to_time(&tm, &new_rtc.tv_sec);
 
101	new_rtc.tv_nsec = 0;
102
103	if (new_rtc.tv_sec <= old_rtc.tv_sec) {
104		if (new_rtc.tv_sec < old_rtc.tv_sec)
105			pr_debug("%s:  time travel!\n", dev_name(&rtc->dev));
106		return 0;
107	}
108
109	/* calculate the RTC time delta (sleep time)*/
110	sleep_time = timespec_sub(new_rtc, old_rtc);
111
112	/*
113	 * Since these RTC suspend/resume handlers are not called
114	 * at the very end of suspend or the start of resume,
115	 * some run-time may pass on either sides of the sleep time
116	 * so subtract kernel run-time between rtc_suspend to rtc_resume
117	 * to keep things accurate.
118	 */
119	sleep_time = timespec_sub(sleep_time,
120			timespec_sub(new_system, old_system));
121
122	timekeeping_inject_sleeptime(&sleep_time);
 
 
123	return 0;
124}
125
 
 
126#else
127#define rtc_suspend	NULL
128#define rtc_resume	NULL
129#endif
130
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
131
132/**
133 * rtc_device_register - register w/ RTC class
134 * @dev: the device to register
135 *
136 * rtc_device_unregister() must be called when the class device is no
137 * longer needed.
138 *
139 * Returns the pointer to the new struct class device.
140 */
141struct rtc_device *rtc_device_register(const char *name, struct device *dev,
142					const struct rtc_class_ops *ops,
143					struct module *owner)
144{
145	struct rtc_device *rtc;
146	struct rtc_wkalrm alrm;
147	int id, err;
148
149	if (idr_pre_get(&rtc_idr, GFP_KERNEL) == 0) {
150		err = -ENOMEM;
 
151		goto exit;
152	}
153
154
155	mutex_lock(&idr_lock);
156	err = idr_get_new(&rtc_idr, NULL, &id);
157	mutex_unlock(&idr_lock);
158
159	if (err < 0)
160		goto exit;
161
162	id = id & MAX_ID_MASK;
163
164	rtc = kzalloc(sizeof(struct rtc_device), GFP_KERNEL);
165	if (rtc == NULL) {
166		err = -ENOMEM;
167		goto exit_idr;
168	}
169
170	rtc->id = id;
171	rtc->ops = ops;
172	rtc->owner = owner;
173	rtc->irq_freq = 1;
174	rtc->max_user_freq = 64;
175	rtc->dev.parent = dev;
176	rtc->dev.class = rtc_class;
177	rtc->dev.release = rtc_device_release;
178
179	mutex_init(&rtc->ops_lock);
180	spin_lock_init(&rtc->irq_lock);
181	spin_lock_init(&rtc->irq_task_lock);
182	init_waitqueue_head(&rtc->irq_queue);
183
184	/* Init timerqueue */
185	timerqueue_init_head(&rtc->timerqueue);
186	INIT_WORK(&rtc->irqwork, rtc_timer_do_work);
187	/* Init aie timer */
188	rtc_timer_init(&rtc->aie_timer, rtc_aie_update_irq, (void *)rtc);
189	/* Init uie timer */
190	rtc_timer_init(&rtc->uie_rtctimer, rtc_uie_update_irq, (void *)rtc);
191	/* Init pie timer */
192	hrtimer_init(&rtc->pie_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
193	rtc->pie_timer.function = rtc_pie_update_irq;
194	rtc->pie_enabled = 0;
195
196	/* Check to see if there is an ALARM already set in hw */
197	err = __rtc_read_alarm(rtc, &alrm);
198
199	if (!err && !rtc_valid_tm(&alrm.time))
200		rtc_initialize_alarm(rtc, &alrm);
201
202	strlcpy(rtc->name, name, RTC_DEVICE_NAME_SIZE);
203	dev_set_name(&rtc->dev, "rtc%d", id);
204
205	rtc_dev_prepare(rtc);
206
207	err = device_register(&rtc->dev);
208	if (err) {
 
 
 
 
209		put_device(&rtc->dev);
210		goto exit_kfree;
 
 
 
211	}
212
213	rtc_dev_add_device(rtc);
214	rtc_sysfs_add_device(rtc);
215	rtc_proc_add_device(rtc);
216
217	dev_info(dev, "rtc core: registered %s as %s\n",
218			rtc->name, dev_name(&rtc->dev));
219
220	return rtc;
221
222exit_kfree:
223	kfree(rtc);
224
225exit_idr:
226	mutex_lock(&idr_lock);
227	idr_remove(&rtc_idr, id);
228	mutex_unlock(&idr_lock);
229
230exit:
231	dev_err(dev, "rtc core: unable to register %s, err = %d\n",
232			name, err);
233	return ERR_PTR(err);
234}
235EXPORT_SYMBOL_GPL(rtc_device_register);
236
237
238/**
239 * rtc_device_unregister - removes the previously registered RTC class device
240 *
241 * @rtc: the RTC class device to destroy
242 */
243void rtc_device_unregister(struct rtc_device *rtc)
244{
245	if (get_device(&rtc->dev) != NULL) {
246		mutex_lock(&rtc->ops_lock);
247		/* remove innards of this RTC, then disable it, before
248		 * letting any rtc_class_open() users access it again
249		 */
250		rtc_sysfs_del_device(rtc);
251		rtc_dev_del_device(rtc);
252		rtc_proc_del_device(rtc);
253		device_unregister(&rtc->dev);
254		rtc->ops = NULL;
255		mutex_unlock(&rtc->ops_lock);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
256		put_device(&rtc->dev);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
257	}
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
258}
259EXPORT_SYMBOL_GPL(rtc_device_unregister);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
260
261static int __init rtc_init(void)
262{
263	rtc_class = class_create(THIS_MODULE, "rtc");
264	if (IS_ERR(rtc_class)) {
265		printk(KERN_ERR "%s: couldn't create class\n", __FILE__);
266		return PTR_ERR(rtc_class);
267	}
268	rtc_class->suspend = rtc_suspend;
269	rtc_class->resume = rtc_resume;
270	rtc_dev_init();
271	rtc_sysfs_init(rtc_class);
272	return 0;
273}
274
275static void __exit rtc_exit(void)
276{
277	rtc_dev_exit();
278	class_destroy(rtc_class);
279	idr_destroy(&rtc_idr);
280}
281
282subsys_initcall(rtc_init);
283module_exit(rtc_exit);
284
285MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
286MODULE_DESCRIPTION("RTC class support");
287MODULE_LICENSE("GPL");
v4.17
  1/*
  2 * RTC subsystem, base class
  3 *
  4 * Copyright (C) 2005 Tower Technologies
  5 * Author: Alessandro Zummo <a.zummo@towertech.it>
  6 *
  7 * class skeleton from drivers/hwmon/hwmon.c
  8 *
  9 * This program is free software; you can redistribute it and/or modify
 10 * it under the terms of the GNU General Public License version 2 as
 11 * published by the Free Software Foundation.
 12*/
 13
 14#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 15
 16#include <linux/module.h>
 17#include <linux/of.h>
 18#include <linux/rtc.h>
 19#include <linux/kdev_t.h>
 20#include <linux/idr.h>
 21#include <linux/slab.h>
 22#include <linux/workqueue.h>
 23
 24#include "rtc-core.h"
 25
 26
 27static DEFINE_IDA(rtc_ida);
 
 28struct class *rtc_class;
 29
 30static void rtc_device_release(struct device *dev)
 31{
 32	struct rtc_device *rtc = to_rtc_device(dev);
 33	ida_simple_remove(&rtc_ida, rtc->id);
 
 
 34	kfree(rtc);
 35}
 36
 37#ifdef CONFIG_RTC_HCTOSYS_DEVICE
 38/* Result of the last RTC to system clock attempt. */
 39int rtc_hctosys_ret = -ENODEV;
 40#endif
 41
 42#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_RTC_HCTOSYS_DEVICE)
 43/*
 44 * On suspend(), measure the delta between one RTC and the
 45 * system's wall clock; restore it on resume().
 46 */
 47
 48static struct timespec64 old_rtc, old_system, old_delta;
 49
 50
 51static int rtc_suspend(struct device *dev)
 52{
 53	struct rtc_device	*rtc = to_rtc_device(dev);
 54	struct rtc_time		tm;
 55	struct timespec64	delta, delta_delta;
 56	int err;
 57
 58	if (timekeeping_rtc_skipsuspend())
 59		return 0;
 60
 61	if (strcmp(dev_name(&rtc->dev), CONFIG_RTC_HCTOSYS_DEVICE) != 0)
 62		return 0;
 63
 64	/* snapshot the current RTC and system time at suspend*/
 65	err = rtc_read_time(rtc, &tm);
 66	if (err < 0) {
 67		pr_debug("%s:  fail to read rtc time\n", dev_name(&rtc->dev));
 68		return 0;
 69	}
 70
 71	getnstimeofday64(&old_system);
 72	old_rtc.tv_sec = rtc_tm_to_time64(&tm);
 73
 74
 75	/*
 76	 * To avoid drift caused by repeated suspend/resumes,
 77	 * which each can add ~1 second drift error,
 78	 * try to compensate so the difference in system time
 79	 * and rtc time stays close to constant.
 80	 */
 81	delta = timespec64_sub(old_system, old_rtc);
 82	delta_delta = timespec64_sub(delta, old_delta);
 83	if (delta_delta.tv_sec < -2 || delta_delta.tv_sec >= 2) {
 84		/*
 85		 * if delta_delta is too large, assume time correction
 86		 * has occured and set old_delta to the current delta.
 87		 */
 88		old_delta = delta;
 89	} else {
 90		/* Otherwise try to adjust old_system to compensate */
 91		old_system = timespec64_sub(old_system, delta_delta);
 92	}
 93
 94	return 0;
 95}
 96
 97static int rtc_resume(struct device *dev)
 98{
 99	struct rtc_device	*rtc = to_rtc_device(dev);
100	struct rtc_time		tm;
101	struct timespec64	new_system, new_rtc;
102	struct timespec64	sleep_time;
103	int err;
104
105	if (timekeeping_rtc_skipresume())
106		return 0;
107
108	rtc_hctosys_ret = -ENODEV;
109	if (strcmp(dev_name(&rtc->dev), CONFIG_RTC_HCTOSYS_DEVICE) != 0)
110		return 0;
111
112	/* snapshot the current rtc and system time at resume */
113	getnstimeofday64(&new_system);
114	err = rtc_read_time(rtc, &tm);
115	if (err < 0) {
116		pr_debug("%s:  fail to read rtc time\n", dev_name(&rtc->dev));
117		return 0;
118	}
119
120	new_rtc.tv_sec = rtc_tm_to_time64(&tm);
121	new_rtc.tv_nsec = 0;
122
123	if (new_rtc.tv_sec < old_rtc.tv_sec) {
124		pr_debug("%s:  time travel!\n", dev_name(&rtc->dev));
 
125		return 0;
126	}
127
128	/* calculate the RTC time delta (sleep time)*/
129	sleep_time = timespec64_sub(new_rtc, old_rtc);
130
131	/*
132	 * Since these RTC suspend/resume handlers are not called
133	 * at the very end of suspend or the start of resume,
134	 * some run-time may pass on either sides of the sleep time
135	 * so subtract kernel run-time between rtc_suspend to rtc_resume
136	 * to keep things accurate.
137	 */
138	sleep_time = timespec64_sub(sleep_time,
139			timespec64_sub(new_system, old_system));
140
141	if (sleep_time.tv_sec >= 0)
142		timekeeping_inject_sleeptime64(&sleep_time);
143	rtc_hctosys_ret = 0;
144	return 0;
145}
146
147static SIMPLE_DEV_PM_OPS(rtc_class_dev_pm_ops, rtc_suspend, rtc_resume);
148#define RTC_CLASS_DEV_PM_OPS	(&rtc_class_dev_pm_ops)
149#else
150#define RTC_CLASS_DEV_PM_OPS	NULL
 
151#endif
152
153/* Ensure the caller will set the id before releasing the device */
154static struct rtc_device *rtc_allocate_device(void)
155{
156	struct rtc_device *rtc;
157
158	rtc = kzalloc(sizeof(*rtc), GFP_KERNEL);
159	if (!rtc)
160		return NULL;
161
162	device_initialize(&rtc->dev);
163
164	/* Drivers can revise this default after allocating the device. */
165	rtc->set_offset_nsec =  NSEC_PER_SEC / 2;
166
167	rtc->irq_freq = 1;
168	rtc->max_user_freq = 64;
169	rtc->dev.class = rtc_class;
170	rtc->dev.groups = rtc_get_dev_attribute_groups();
171	rtc->dev.release = rtc_device_release;
172
173	mutex_init(&rtc->ops_lock);
174	spin_lock_init(&rtc->irq_lock);
175	spin_lock_init(&rtc->irq_task_lock);
176	init_waitqueue_head(&rtc->irq_queue);
177
178	/* Init timerqueue */
179	timerqueue_init_head(&rtc->timerqueue);
180	INIT_WORK(&rtc->irqwork, rtc_timer_do_work);
181	/* Init aie timer */
182	rtc_timer_init(&rtc->aie_timer, rtc_aie_update_irq, (void *)rtc);
183	/* Init uie timer */
184	rtc_timer_init(&rtc->uie_rtctimer, rtc_uie_update_irq, (void *)rtc);
185	/* Init pie timer */
186	hrtimer_init(&rtc->pie_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
187	rtc->pie_timer.function = rtc_pie_update_irq;
188	rtc->pie_enabled = 0;
189
190	return rtc;
191}
192
193static int rtc_device_get_id(struct device *dev)
194{
195	int of_id = -1, id = -1;
196
197	if (dev->of_node)
198		of_id = of_alias_get_id(dev->of_node, "rtc");
199	else if (dev->parent && dev->parent->of_node)
200		of_id = of_alias_get_id(dev->parent->of_node, "rtc");
201
202	if (of_id >= 0) {
203		id = ida_simple_get(&rtc_ida, of_id, of_id + 1, GFP_KERNEL);
204		if (id < 0)
205			dev_warn(dev, "/aliases ID %d not available\n", of_id);
206	}
207
208	if (id < 0)
209		id = ida_simple_get(&rtc_ida, 0, 0, GFP_KERNEL);
210
211	return id;
212}
213
214static void rtc_device_get_offset(struct rtc_device *rtc)
215{
216	time64_t range_secs;
217	u32 start_year;
218	int ret;
219
220	/*
221	 * If RTC driver did not implement the range of RTC hardware device,
222	 * then we can not expand the RTC range by adding or subtracting one
223	 * offset.
224	 */
225	if (rtc->range_min == rtc->range_max)
226		return;
227
228	ret = device_property_read_u32(rtc->dev.parent, "start-year",
229				       &start_year);
230	if (!ret) {
231		rtc->start_secs = mktime64(start_year, 1, 1, 0, 0, 0);
232		rtc->set_start_time = true;
233	}
234
235	/*
236	 * If user did not implement the start time for RTC driver, then no
237	 * need to expand the RTC range.
238	 */
239	if (!rtc->set_start_time)
240		return;
241
242	range_secs = rtc->range_max - rtc->range_min + 1;
243
244	/*
245	 * If the start_secs is larger than the maximum seconds (rtc->range_max)
246	 * supported by RTC hardware or the maximum seconds of new expanded
247	 * range (start_secs + rtc->range_max - rtc->range_min) is less than
248	 * rtc->range_min, which means the minimum seconds (rtc->range_min) of
249	 * RTC hardware will be mapped to start_secs by adding one offset, so
250	 * the offset seconds calculation formula should be:
251	 * rtc->offset_secs = rtc->start_secs - rtc->range_min;
252	 *
253	 * If the start_secs is larger than the minimum seconds (rtc->range_min)
254	 * supported by RTC hardware, then there is one region is overlapped
255	 * between the original RTC hardware range and the new expanded range,
256	 * and this overlapped region do not need to be mapped into the new
257	 * expanded range due to it is valid for RTC device. So the minimum
258	 * seconds of RTC hardware (rtc->range_min) should be mapped to
259	 * rtc->range_max + 1, then the offset seconds formula should be:
260	 * rtc->offset_secs = rtc->range_max - rtc->range_min + 1;
261	 *
262	 * If the start_secs is less than the minimum seconds (rtc->range_min),
263	 * which is similar to case 2. So the start_secs should be mapped to
264	 * start_secs + rtc->range_max - rtc->range_min + 1, then the
265	 * offset seconds formula should be:
266	 * rtc->offset_secs = -(rtc->range_max - rtc->range_min + 1);
267	 *
268	 * Otherwise the offset seconds should be 0.
269	 */
270	if (rtc->start_secs > rtc->range_max ||
271	    rtc->start_secs + range_secs - 1 < rtc->range_min)
272		rtc->offset_secs = rtc->start_secs - rtc->range_min;
273	else if (rtc->start_secs > rtc->range_min)
274		rtc->offset_secs = range_secs;
275	else if (rtc->start_secs < rtc->range_min)
276		rtc->offset_secs = -range_secs;
277	else
278		rtc->offset_secs = 0;
279}
280
281/**
282 * rtc_device_register - register w/ RTC class
283 * @dev: the device to register
284 *
285 * rtc_device_unregister() must be called when the class device is no
286 * longer needed.
287 *
288 * Returns the pointer to the new struct class device.
289 */
290struct rtc_device *rtc_device_register(const char *name, struct device *dev,
291					const struct rtc_class_ops *ops,
292					struct module *owner)
293{
294	struct rtc_device *rtc;
295	struct rtc_wkalrm alrm;
296	int id, err;
297
298	id = rtc_device_get_id(dev);
299	if (id < 0) {
300		err = id;
301		goto exit;
302	}
303
304	rtc = rtc_allocate_device();
305	if (!rtc) {
 
 
 
 
 
 
 
 
 
 
306		err = -ENOMEM;
307		goto exit_ida;
308	}
309
310	rtc->id = id;
311	rtc->ops = ops;
312	rtc->owner = owner;
 
 
313	rtc->dev.parent = dev;
 
 
314
315	dev_set_name(&rtc->dev, "rtc%d", id);
 
 
 
316
317	rtc_device_get_offset(rtc);
 
 
 
 
 
 
 
 
 
 
318
319	/* Check to see if there is an ALARM already set in hw */
320	err = __rtc_read_alarm(rtc, &alrm);
321
322	if (!err && !rtc_valid_tm(&alrm.time))
323		rtc_initialize_alarm(rtc, &alrm);
324
 
 
 
325	rtc_dev_prepare(rtc);
326
327	err = cdev_device_add(&rtc->char_dev, &rtc->dev);
328	if (err) {
329		dev_warn(&rtc->dev, "%s: failed to add char device %d:%d\n",
330			 name, MAJOR(rtc->dev.devt), rtc->id);
331
332		/* This will free both memory and the ID */
333		put_device(&rtc->dev);
334		goto exit;
335	} else {
336		dev_dbg(&rtc->dev, "%s: dev (%d:%d)\n", name,
337			MAJOR(rtc->dev.devt), rtc->id);
338	}
339
 
 
340	rtc_proc_add_device(rtc);
341
342	dev_info(dev, "rtc core: registered %s as %s\n",
343			name, dev_name(&rtc->dev));
344
345	return rtc;
346
347exit_ida:
348	ida_simple_remove(&rtc_ida, id);
 
 
 
 
 
349
350exit:
351	dev_err(dev, "rtc core: unable to register %s, err = %d\n",
352			name, err);
353	return ERR_PTR(err);
354}
355EXPORT_SYMBOL_GPL(rtc_device_register);
356
357
358/**
359 * rtc_device_unregister - removes the previously registered RTC class device
360 *
361 * @rtc: the RTC class device to destroy
362 */
363void rtc_device_unregister(struct rtc_device *rtc)
364{
365	mutex_lock(&rtc->ops_lock);
366	/*
367	 * Remove innards of this RTC, then disable it, before
368	 * letting any rtc_class_open() users access it again
369	 */
370	rtc_proc_del_device(rtc);
371	cdev_device_del(&rtc->char_dev, &rtc->dev);
372	rtc->ops = NULL;
373	mutex_unlock(&rtc->ops_lock);
374	put_device(&rtc->dev);
375}
376EXPORT_SYMBOL_GPL(rtc_device_unregister);
377
378static void devm_rtc_device_release(struct device *dev, void *res)
379{
380	struct rtc_device *rtc = *(struct rtc_device **)res;
381
382	rtc_nvmem_unregister(rtc);
383	rtc_device_unregister(rtc);
384}
385
386static int devm_rtc_device_match(struct device *dev, void *res, void *data)
387{
388	struct rtc **r = res;
389
390	return *r == data;
391}
392
393/**
394 * devm_rtc_device_register - resource managed rtc_device_register()
395 * @dev: the device to register
396 * @name: the name of the device
397 * @ops: the rtc operations structure
398 * @owner: the module owner
399 *
400 * @return a struct rtc on success, or an ERR_PTR on error
401 *
402 * Managed rtc_device_register(). The rtc_device returned from this function
403 * are automatically freed on driver detach. See rtc_device_register()
404 * for more information.
405 */
406
407struct rtc_device *devm_rtc_device_register(struct device *dev,
408					const char *name,
409					const struct rtc_class_ops *ops,
410					struct module *owner)
411{
412	struct rtc_device **ptr, *rtc;
413
414	ptr = devres_alloc(devm_rtc_device_release, sizeof(*ptr), GFP_KERNEL);
415	if (!ptr)
416		return ERR_PTR(-ENOMEM);
417
418	rtc = rtc_device_register(name, dev, ops, owner);
419	if (!IS_ERR(rtc)) {
420		*ptr = rtc;
421		devres_add(dev, ptr);
422	} else {
423		devres_free(ptr);
424	}
425
426	return rtc;
427}
428EXPORT_SYMBOL_GPL(devm_rtc_device_register);
429
430/**
431 * devm_rtc_device_unregister - resource managed devm_rtc_device_unregister()
432 * @dev: the device to unregister
433 * @rtc: the RTC class device to unregister
434 *
435 * Deallocated a rtc allocated with devm_rtc_device_register(). Normally this
436 * function will not need to be called and the resource management code will
437 * ensure that the resource is freed.
438 */
439void devm_rtc_device_unregister(struct device *dev, struct rtc_device *rtc)
440{
441	int rc;
442
443	rc = devres_release(dev, devm_rtc_device_release,
444				devm_rtc_device_match, rtc);
445	WARN_ON(rc);
446}
447EXPORT_SYMBOL_GPL(devm_rtc_device_unregister);
448
449static void devm_rtc_release_device(struct device *dev, void *res)
450{
451	struct rtc_device *rtc = *(struct rtc_device **)res;
452
453	rtc_nvmem_unregister(rtc);
454
455	if (rtc->registered)
456		rtc_device_unregister(rtc);
457	else
458		put_device(&rtc->dev);
459}
460
461struct rtc_device *devm_rtc_allocate_device(struct device *dev)
462{
463	struct rtc_device **ptr, *rtc;
464	int id, err;
465
466	id = rtc_device_get_id(dev);
467	if (id < 0)
468		return ERR_PTR(id);
469
470	ptr = devres_alloc(devm_rtc_release_device, sizeof(*ptr), GFP_KERNEL);
471	if (!ptr) {
472		err = -ENOMEM;
473		goto exit_ida;
474	}
475
476	rtc = rtc_allocate_device();
477	if (!rtc) {
478		err = -ENOMEM;
479		goto exit_devres;
480	}
481
482	*ptr = rtc;
483	devres_add(dev, ptr);
484
485	rtc->id = id;
486	rtc->dev.parent = dev;
487	dev_set_name(&rtc->dev, "rtc%d", id);
488
489	return rtc;
490
491exit_devres:
492	devres_free(ptr);
493exit_ida:
494	ida_simple_remove(&rtc_ida, id);
495	return ERR_PTR(err);
496}
497EXPORT_SYMBOL_GPL(devm_rtc_allocate_device);
498
499int __rtc_register_device(struct module *owner, struct rtc_device *rtc)
500{
501	struct rtc_wkalrm alrm;
502	int err;
503
504	if (!rtc->ops)
505		return -EINVAL;
506
507	rtc->owner = owner;
508	rtc_device_get_offset(rtc);
509
510	/* Check to see if there is an ALARM already set in hw */
511	err = __rtc_read_alarm(rtc, &alrm);
512	if (!err && !rtc_valid_tm(&alrm.time))
513		rtc_initialize_alarm(rtc, &alrm);
514
515	rtc_dev_prepare(rtc);
516
517	err = cdev_device_add(&rtc->char_dev, &rtc->dev);
518	if (err)
519		dev_warn(rtc->dev.parent, "failed to add char device %d:%d\n",
520			 MAJOR(rtc->dev.devt), rtc->id);
521	else
522		dev_dbg(rtc->dev.parent, "char device (%d:%d)\n",
523			MAJOR(rtc->dev.devt), rtc->id);
524
525	rtc_proc_add_device(rtc);
526
527	rtc->registered = true;
528	dev_info(rtc->dev.parent, "registered as %s\n",
529		 dev_name(&rtc->dev));
530
531	return 0;
532}
533EXPORT_SYMBOL_GPL(__rtc_register_device);
534
535static int __init rtc_init(void)
536{
537	rtc_class = class_create(THIS_MODULE, "rtc");
538	if (IS_ERR(rtc_class)) {
539		pr_err("couldn't create class\n");
540		return PTR_ERR(rtc_class);
541	}
542	rtc_class->pm = RTC_CLASS_DEV_PM_OPS;
 
543	rtc_dev_init();
 
544	return 0;
545}
 
 
 
 
 
 
 
 
546subsys_initcall(rtc_init);