Linux Audio

Check our new training course

Embedded Linux training

Mar 31-Apr 8, 2025
Register
Loading...
Note: File does not exist in v3.1.
   1/*******************************************************************************
   2
   3  Intel 10 Gigabit PCI Express Linux driver
   4  Copyright(c) 1999 - 2015 Intel Corporation.
   5
   6  This program is free software; you can redistribute it and/or modify it
   7  under the terms and conditions of the GNU General Public License,
   8  version 2, as published by the Free Software Foundation.
   9
  10  This program is distributed in the hope it will be useful, but WITHOUT
  11  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  12  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  13  more details.
  14
  15  You should have received a copy of the GNU General Public License along with
  16  this program; if not, write to the Free Software Foundation, Inc.,
  17  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  18
  19  The full GNU General Public License is included in this distribution in
  20  the file called "COPYING".
  21
  22  Contact Information:
  23  Linux NICS <linux.nics@intel.com>
  24  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
  25  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  26
  27*******************************************************************************/
  28
  29#include <linux/types.h>
  30#include <linux/module.h>
  31#include <linux/pci.h>
  32#include <linux/netdevice.h>
  33#include <linux/vmalloc.h>
  34#include <linux/string.h>
  35#include <linux/in.h>
  36#include <linux/ip.h>
  37#include <linux/tcp.h>
  38#include <linux/ipv6.h>
  39#include <linux/if_bridge.h>
  40#ifdef NETIF_F_HW_VLAN_CTAG_TX
  41#include <linux/if_vlan.h>
  42#endif
  43
  44#include "ixgbe.h"
  45#include "ixgbe_type.h"
  46#include "ixgbe_sriov.h"
  47
  48#ifdef CONFIG_PCI_IOV
  49static inline void ixgbe_alloc_vf_macvlans(struct ixgbe_adapter *adapter,
  50					   unsigned int num_vfs)
  51{
  52	struct ixgbe_hw *hw = &adapter->hw;
  53	struct vf_macvlans *mv_list;
  54	int num_vf_macvlans, i;
  55
  56	num_vf_macvlans = hw->mac.num_rar_entries -
  57			  (IXGBE_MAX_PF_MACVLANS + 1 + num_vfs);
  58	if (!num_vf_macvlans)
  59		return;
  60
  61	mv_list = kcalloc(num_vf_macvlans, sizeof(struct vf_macvlans),
  62			  GFP_KERNEL);
  63	if (mv_list) {
  64		/* Initialize list of VF macvlans */
  65		INIT_LIST_HEAD(&adapter->vf_mvs.l);
  66		for (i = 0; i < num_vf_macvlans; i++) {
  67			mv_list[i].vf = -1;
  68			mv_list[i].free = true;
  69			list_add(&mv_list[i].l, &adapter->vf_mvs.l);
  70		}
  71		adapter->mv_list = mv_list;
  72	}
  73}
  74
  75static int __ixgbe_enable_sriov(struct ixgbe_adapter *adapter,
  76				unsigned int num_vfs)
  77{
  78	struct ixgbe_hw *hw = &adapter->hw;
  79	int i;
  80
  81	/* Enable VMDq flag so device will be set in VM mode */
  82	adapter->flags |= IXGBE_FLAG_SRIOV_ENABLED |
  83			  IXGBE_FLAG_VMDQ_ENABLED;
  84
  85	/* Allocate memory for per VF control structures */
  86	adapter->vfinfo = kcalloc(num_vfs, sizeof(struct vf_data_storage),
  87				  GFP_KERNEL);
  88	if (!adapter->vfinfo)
  89		return -ENOMEM;
  90
  91	adapter->num_vfs = num_vfs;
  92
  93	ixgbe_alloc_vf_macvlans(adapter, num_vfs);
  94	adapter->ring_feature[RING_F_VMDQ].offset = num_vfs;
  95
  96	/* Initialize default switching mode VEB */
  97	IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, IXGBE_PFDTXGSWC_VT_LBEN);
  98	adapter->bridge_mode = BRIDGE_MODE_VEB;
  99
 100	/* limit trafffic classes based on VFs enabled */
 101	if ((adapter->hw.mac.type == ixgbe_mac_82599EB) && (num_vfs < 16)) {
 102		adapter->dcb_cfg.num_tcs.pg_tcs = MAX_TRAFFIC_CLASS;
 103		adapter->dcb_cfg.num_tcs.pfc_tcs = MAX_TRAFFIC_CLASS;
 104	} else if (num_vfs < 32) {
 105		adapter->dcb_cfg.num_tcs.pg_tcs = 4;
 106		adapter->dcb_cfg.num_tcs.pfc_tcs = 4;
 107	} else {
 108		adapter->dcb_cfg.num_tcs.pg_tcs = 1;
 109		adapter->dcb_cfg.num_tcs.pfc_tcs = 1;
 110	}
 111
 112	/* Disable RSC when in SR-IOV mode */
 113	adapter->flags2 &= ~(IXGBE_FLAG2_RSC_CAPABLE |
 114			     IXGBE_FLAG2_RSC_ENABLED);
 115
 116	for (i = 0; i < num_vfs; i++) {
 117		/* enable spoof checking for all VFs */
 118		adapter->vfinfo[i].spoofchk_enabled = true;
 119
 120		/* We support VF RSS querying only for 82599 and x540
 121		 * devices at the moment. These devices share RSS
 122		 * indirection table and RSS hash key with PF therefore
 123		 * we want to disable the querying by default.
 124		 */
 125		adapter->vfinfo[i].rss_query_enabled = 0;
 126
 127		/* Untrust all VFs */
 128		adapter->vfinfo[i].trusted = false;
 129
 130		/* set the default xcast mode */
 131		adapter->vfinfo[i].xcast_mode = IXGBEVF_XCAST_MODE_NONE;
 132	}
 133
 134	e_info(probe, "SR-IOV enabled with %d VFs\n", num_vfs);
 135	return 0;
 136}
 137
 138/**
 139 * ixgbe_get_vfs - Find and take references to all vf devices
 140 * @adapter: Pointer to adapter struct
 141 */
 142static void ixgbe_get_vfs(struct ixgbe_adapter *adapter)
 143{
 144	struct pci_dev *pdev = adapter->pdev;
 145	u16 vendor = pdev->vendor;
 146	struct pci_dev *vfdev;
 147	int vf = 0;
 148	u16 vf_id;
 149	int pos;
 150
 151	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_SRIOV);
 152	if (!pos)
 153		return;
 154	pci_read_config_word(pdev, pos + PCI_SRIOV_VF_DID, &vf_id);
 155
 156	vfdev = pci_get_device(vendor, vf_id, NULL);
 157	for (; vfdev; vfdev = pci_get_device(vendor, vf_id, vfdev)) {
 158		if (!vfdev->is_virtfn)
 159			continue;
 160		if (vfdev->physfn != pdev)
 161			continue;
 162		if (vf >= adapter->num_vfs)
 163			continue;
 164		pci_dev_get(vfdev);
 165		adapter->vfinfo[vf].vfdev = vfdev;
 166		++vf;
 167	}
 168}
 169
 170/* Note this function is called when the user wants to enable SR-IOV
 171 * VFs using the now deprecated module parameter
 172 */
 173void ixgbe_enable_sriov(struct ixgbe_adapter *adapter, unsigned int max_vfs)
 174{
 175	int pre_existing_vfs = 0;
 176	unsigned int num_vfs;
 177
 178	pre_existing_vfs = pci_num_vf(adapter->pdev);
 179	if (!pre_existing_vfs && !max_vfs)
 180		return;
 181
 182	/* If there are pre-existing VFs then we have to force
 183	 * use of that many - over ride any module parameter value.
 184	 * This may result from the user unloading the PF driver
 185	 * while VFs were assigned to guest VMs or because the VFs
 186	 * have been created via the new PCI SR-IOV sysfs interface.
 187	 */
 188	if (pre_existing_vfs) {
 189		num_vfs = pre_existing_vfs;
 190		dev_warn(&adapter->pdev->dev,
 191			 "Virtual Functions already enabled for this device - Please reload all VF drivers to avoid spoofed packet errors\n");
 192	} else {
 193		int err;
 194		/*
 195		 * The 82599 supports up to 64 VFs per physical function
 196		 * but this implementation limits allocation to 63 so that
 197		 * basic networking resources are still available to the
 198		 * physical function.  If the user requests greater than
 199		 * 63 VFs then it is an error - reset to default of zero.
 200		 */
 201		num_vfs = min_t(unsigned int, max_vfs, IXGBE_MAX_VFS_DRV_LIMIT);
 202
 203		err = pci_enable_sriov(adapter->pdev, num_vfs);
 204		if (err) {
 205			e_err(probe, "Failed to enable PCI sriov: %d\n", err);
 206			return;
 207		}
 208	}
 209
 210	if (!__ixgbe_enable_sriov(adapter, num_vfs)) {
 211		ixgbe_get_vfs(adapter);
 212		return;
 213	}
 214
 215	/* If we have gotten to this point then there is no memory available
 216	 * to manage the VF devices - print message and bail.
 217	 */
 218	e_err(probe, "Unable to allocate memory for VF Data Storage - "
 219	      "SRIOV disabled\n");
 220	ixgbe_disable_sriov(adapter);
 221}
 222
 223#endif /* #ifdef CONFIG_PCI_IOV */
 224int ixgbe_disable_sriov(struct ixgbe_adapter *adapter)
 225{
 226	unsigned int num_vfs = adapter->num_vfs, vf;
 227	int rss;
 228
 229	/* set num VFs to 0 to prevent access to vfinfo */
 230	adapter->num_vfs = 0;
 231
 232	/* put the reference to all of the vf devices */
 233	for (vf = 0; vf < num_vfs; ++vf) {
 234		struct pci_dev *vfdev = adapter->vfinfo[vf].vfdev;
 235
 236		if (!vfdev)
 237			continue;
 238		adapter->vfinfo[vf].vfdev = NULL;
 239		pci_dev_put(vfdev);
 240	}
 241
 242	/* free VF control structures */
 243	kfree(adapter->vfinfo);
 244	adapter->vfinfo = NULL;
 245
 246	/* free macvlan list */
 247	kfree(adapter->mv_list);
 248	adapter->mv_list = NULL;
 249
 250	/* if SR-IOV is already disabled then there is nothing to do */
 251	if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED))
 252		return 0;
 253
 254#ifdef CONFIG_PCI_IOV
 255	/*
 256	 * If our VFs are assigned we cannot shut down SR-IOV
 257	 * without causing issues, so just leave the hardware
 258	 * available but disabled
 259	 */
 260	if (pci_vfs_assigned(adapter->pdev)) {
 261		e_dev_warn("Unloading driver while VFs are assigned - VFs will not be deallocated\n");
 262		return -EPERM;
 263	}
 264	/* disable iov and allow time for transactions to clear */
 265	pci_disable_sriov(adapter->pdev);
 266#endif
 267
 268	/* Disable VMDq flag so device will be set in VM mode */
 269	if (adapter->ring_feature[RING_F_VMDQ].limit == 1) {
 270		adapter->flags &= ~IXGBE_FLAG_VMDQ_ENABLED;
 271		adapter->flags &= ~IXGBE_FLAG_SRIOV_ENABLED;
 272		rss = min_t(int, ixgbe_max_rss_indices(adapter),
 273			    num_online_cpus());
 274	} else {
 275		rss = min_t(int, IXGBE_MAX_L2A_QUEUES, num_online_cpus());
 276	}
 277
 278	adapter->ring_feature[RING_F_VMDQ].offset = 0;
 279	adapter->ring_feature[RING_F_RSS].limit = rss;
 280
 281	/* take a breather then clean up driver data */
 282	msleep(100);
 283	return 0;
 284}
 285
 286static int ixgbe_pci_sriov_enable(struct pci_dev *dev, int num_vfs)
 287{
 288#ifdef CONFIG_PCI_IOV
 289	struct ixgbe_adapter *adapter = pci_get_drvdata(dev);
 290	int pre_existing_vfs = pci_num_vf(dev);
 291	int err = 0, num_rx_pools, i, limit;
 292	u8 num_tc;
 293
 294	if (pre_existing_vfs && pre_existing_vfs != num_vfs)
 295		err = ixgbe_disable_sriov(adapter);
 296	else if (pre_existing_vfs && pre_existing_vfs == num_vfs)
 297		return num_vfs;
 298
 299	if (err)
 300		return err;
 301
 302	/* While the SR-IOV capability structure reports total VFs to be 64,
 303	 * we limit the actual number allocated as below based on two factors.
 304	 *    Num_TCs	MAX_VFs
 305	 *	1	  63
 306	 *	<=4	  31
 307	 *	>4	  15
 308	 * First, we reserve some transmit/receive resources for the PF.
 309	 * Second, VMDQ also uses the same pools that SR-IOV does. We need to
 310	 * account for this, so that we don't accidentally allocate more VFs
 311	 * than we have available pools. The PCI bus driver already checks for
 312	 * other values out of range.
 313	 */
 314	num_tc = adapter->hw_tcs;
 315	num_rx_pools = adapter->num_rx_pools;
 316	limit = (num_tc > 4) ? IXGBE_MAX_VFS_8TC :
 317		(num_tc > 1) ? IXGBE_MAX_VFS_4TC : IXGBE_MAX_VFS_1TC;
 318
 319	if (num_vfs > (limit - num_rx_pools)) {
 320		e_dev_err("Currently configured with %d TCs, and %d offloaded macvlans. Creating more than %d VFs is not allowed\n",
 321			  num_tc, num_rx_pools - 1, limit - num_rx_pools);
 322		return -EPERM;
 323	}
 324
 325	err = __ixgbe_enable_sriov(adapter, num_vfs);
 326	if (err)
 327		return  err;
 328
 329	for (i = 0; i < num_vfs; i++)
 330		ixgbe_vf_configuration(dev, (i | 0x10000000));
 331
 332	/* reset before enabling SRIOV to avoid mailbox issues */
 333	ixgbe_sriov_reinit(adapter);
 334
 335	err = pci_enable_sriov(dev, num_vfs);
 336	if (err) {
 337		e_dev_warn("Failed to enable PCI sriov: %d\n", err);
 338		return err;
 339	}
 340	ixgbe_get_vfs(adapter);
 341
 342	return num_vfs;
 343#else
 344	return 0;
 345#endif
 346}
 347
 348static int ixgbe_pci_sriov_disable(struct pci_dev *dev)
 349{
 350	struct ixgbe_adapter *adapter = pci_get_drvdata(dev);
 351	int err;
 352#ifdef CONFIG_PCI_IOV
 353	u32 current_flags = adapter->flags;
 354	int prev_num_vf = pci_num_vf(dev);
 355#endif
 356
 357	err = ixgbe_disable_sriov(adapter);
 358
 359	/* Only reinit if no error and state changed */
 360#ifdef CONFIG_PCI_IOV
 361	if (!err && (current_flags != adapter->flags ||
 362		     prev_num_vf != pci_num_vf(dev)))
 363		ixgbe_sriov_reinit(adapter);
 364#endif
 365
 366	return err;
 367}
 368
 369int ixgbe_pci_sriov_configure(struct pci_dev *dev, int num_vfs)
 370{
 371	if (num_vfs == 0)
 372		return ixgbe_pci_sriov_disable(dev);
 373	else
 374		return ixgbe_pci_sriov_enable(dev, num_vfs);
 375}
 376
 377static int ixgbe_set_vf_multicasts(struct ixgbe_adapter *adapter,
 378				   u32 *msgbuf, u32 vf)
 379{
 380	int entries = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK)
 381		       >> IXGBE_VT_MSGINFO_SHIFT;
 382	u16 *hash_list = (u16 *)&msgbuf[1];
 383	struct vf_data_storage *vfinfo = &adapter->vfinfo[vf];
 384	struct ixgbe_hw *hw = &adapter->hw;
 385	int i;
 386	u32 vector_bit;
 387	u32 vector_reg;
 388	u32 mta_reg;
 389	u32 vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(vf));
 390
 391	/* only so many hash values supported */
 392	entries = min(entries, IXGBE_MAX_VF_MC_ENTRIES);
 393
 394	/*
 395	 * salt away the number of multi cast addresses assigned
 396	 * to this VF for later use to restore when the PF multi cast
 397	 * list changes
 398	 */
 399	vfinfo->num_vf_mc_hashes = entries;
 400
 401	/*
 402	 * VFs are limited to using the MTA hash table for their multicast
 403	 * addresses
 404	 */
 405	for (i = 0; i < entries; i++) {
 406		vfinfo->vf_mc_hashes[i] = hash_list[i];
 407	}
 408
 409	for (i = 0; i < vfinfo->num_vf_mc_hashes; i++) {
 410		vector_reg = (vfinfo->vf_mc_hashes[i] >> 5) & 0x7F;
 411		vector_bit = vfinfo->vf_mc_hashes[i] & 0x1F;
 412		mta_reg = IXGBE_READ_REG(hw, IXGBE_MTA(vector_reg));
 413		mta_reg |= BIT(vector_bit);
 414		IXGBE_WRITE_REG(hw, IXGBE_MTA(vector_reg), mta_reg);
 415	}
 416	vmolr |= IXGBE_VMOLR_ROMPE;
 417	IXGBE_WRITE_REG(hw, IXGBE_VMOLR(vf), vmolr);
 418
 419	return 0;
 420}
 421
 422#ifdef CONFIG_PCI_IOV
 423void ixgbe_restore_vf_multicasts(struct ixgbe_adapter *adapter)
 424{
 425	struct ixgbe_hw *hw = &adapter->hw;
 426	struct vf_data_storage *vfinfo;
 427	int i, j;
 428	u32 vector_bit;
 429	u32 vector_reg;
 430	u32 mta_reg;
 431
 432	for (i = 0; i < adapter->num_vfs; i++) {
 433		u32 vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(i));
 434		vfinfo = &adapter->vfinfo[i];
 435		for (j = 0; j < vfinfo->num_vf_mc_hashes; j++) {
 436			hw->addr_ctrl.mta_in_use++;
 437			vector_reg = (vfinfo->vf_mc_hashes[j] >> 5) & 0x7F;
 438			vector_bit = vfinfo->vf_mc_hashes[j] & 0x1F;
 439			mta_reg = IXGBE_READ_REG(hw, IXGBE_MTA(vector_reg));
 440			mta_reg |= BIT(vector_bit);
 441			IXGBE_WRITE_REG(hw, IXGBE_MTA(vector_reg), mta_reg);
 442		}
 443
 444		if (vfinfo->num_vf_mc_hashes)
 445			vmolr |= IXGBE_VMOLR_ROMPE;
 446		else
 447			vmolr &= ~IXGBE_VMOLR_ROMPE;
 448		IXGBE_WRITE_REG(hw, IXGBE_VMOLR(i), vmolr);
 449	}
 450
 451	/* Restore any VF macvlans */
 452	ixgbe_full_sync_mac_table(adapter);
 453}
 454#endif
 455
 456static int ixgbe_set_vf_vlan(struct ixgbe_adapter *adapter, int add, int vid,
 457			     u32 vf)
 458{
 459	struct ixgbe_hw *hw = &adapter->hw;
 460	int err;
 461
 462	/* If VLAN overlaps with one the PF is currently monitoring make
 463	 * sure that we are able to allocate a VLVF entry.  This may be
 464	 * redundant but it guarantees PF will maintain visibility to
 465	 * the VLAN.
 466	 */
 467	if (add && test_bit(vid, adapter->active_vlans)) {
 468		err = hw->mac.ops.set_vfta(hw, vid, VMDQ_P(0), true, false);
 469		if (err)
 470			return err;
 471	}
 472
 473	err = hw->mac.ops.set_vfta(hw, vid, vf, !!add, false);
 474
 475	if (add && !err)
 476		return err;
 477
 478	/* If we failed to add the VF VLAN or we are removing the VF VLAN
 479	 * we may need to drop the PF pool bit in order to allow us to free
 480	 * up the VLVF resources.
 481	 */
 482	if (test_bit(vid, adapter->active_vlans) ||
 483	    (adapter->flags2 & IXGBE_FLAG2_VLAN_PROMISC))
 484		ixgbe_update_pf_promisc_vlvf(adapter, vid);
 485
 486	return err;
 487}
 488
 489static s32 ixgbe_set_vf_lpe(struct ixgbe_adapter *adapter, u32 *msgbuf, u32 vf)
 490{
 491	struct ixgbe_hw *hw = &adapter->hw;
 492	int max_frame = msgbuf[1];
 493	u32 max_frs;
 494
 495	/*
 496	 * For 82599EB we have to keep all PFs and VFs operating with
 497	 * the same max_frame value in order to avoid sending an oversize
 498	 * frame to a VF.  In order to guarantee this is handled correctly
 499	 * for all cases we have several special exceptions to take into
 500	 * account before we can enable the VF for receive
 501	 */
 502	if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
 503		struct net_device *dev = adapter->netdev;
 504		int pf_max_frame = dev->mtu + ETH_HLEN;
 505		u32 reg_offset, vf_shift, vfre;
 506		s32 err = 0;
 507
 508#ifdef CONFIG_FCOE
 509		if (dev->features & NETIF_F_FCOE_MTU)
 510			pf_max_frame = max_t(int, pf_max_frame,
 511					     IXGBE_FCOE_JUMBO_FRAME_SIZE);
 512
 513#endif /* CONFIG_FCOE */
 514		switch (adapter->vfinfo[vf].vf_api) {
 515		case ixgbe_mbox_api_11:
 516		case ixgbe_mbox_api_12:
 517		case ixgbe_mbox_api_13:
 518			/* Version 1.1 supports jumbo frames on VFs if PF has
 519			 * jumbo frames enabled which means legacy VFs are
 520			 * disabled
 521			 */
 522			if (pf_max_frame > ETH_FRAME_LEN)
 523				break;
 524			/* fall through */
 525		default:
 526			/* If the PF or VF are running w/ jumbo frames enabled
 527			 * we need to shut down the VF Rx path as we cannot
 528			 * support jumbo frames on legacy VFs
 529			 */
 530			if ((pf_max_frame > ETH_FRAME_LEN) ||
 531			    (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN)))
 532				err = -EINVAL;
 533			break;
 534		}
 535
 536		/* determine VF receive enable location */
 537		vf_shift = vf % 32;
 538		reg_offset = vf / 32;
 539
 540		/* enable or disable receive depending on error */
 541		vfre = IXGBE_READ_REG(hw, IXGBE_VFRE(reg_offset));
 542		if (err)
 543			vfre &= ~BIT(vf_shift);
 544		else
 545			vfre |= BIT(vf_shift);
 546		IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), vfre);
 547
 548		if (err) {
 549			e_err(drv, "VF max_frame %d out of range\n", max_frame);
 550			return err;
 551		}
 552	}
 553
 554	/* MTU < 68 is an error and causes problems on some kernels */
 555	if (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE) {
 556		e_err(drv, "VF max_frame %d out of range\n", max_frame);
 557		return -EINVAL;
 558	}
 559
 560	/* pull current max frame size from hardware */
 561	max_frs = IXGBE_READ_REG(hw, IXGBE_MAXFRS);
 562	max_frs &= IXGBE_MHADD_MFS_MASK;
 563	max_frs >>= IXGBE_MHADD_MFS_SHIFT;
 564
 565	if (max_frs < max_frame) {
 566		max_frs = max_frame << IXGBE_MHADD_MFS_SHIFT;
 567		IXGBE_WRITE_REG(hw, IXGBE_MAXFRS, max_frs);
 568	}
 569
 570	e_info(hw, "VF requests change max MTU to %d\n", max_frame);
 571
 572	return 0;
 573}
 574
 575static void ixgbe_set_vmolr(struct ixgbe_hw *hw, u32 vf, bool aupe)
 576{
 577	u32 vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(vf));
 578	vmolr |= IXGBE_VMOLR_BAM;
 579	if (aupe)
 580		vmolr |= IXGBE_VMOLR_AUPE;
 581	else
 582		vmolr &= ~IXGBE_VMOLR_AUPE;
 583	IXGBE_WRITE_REG(hw, IXGBE_VMOLR(vf), vmolr);
 584}
 585
 586static void ixgbe_clear_vmvir(struct ixgbe_adapter *adapter, u32 vf)
 587{
 588	struct ixgbe_hw *hw = &adapter->hw;
 589
 590	IXGBE_WRITE_REG(hw, IXGBE_VMVIR(vf), 0);
 591}
 592
 593static void ixgbe_clear_vf_vlans(struct ixgbe_adapter *adapter, u32 vf)
 594{
 595	struct ixgbe_hw *hw = &adapter->hw;
 596	u32 vlvfb_mask, pool_mask, i;
 597
 598	/* create mask for VF and other pools */
 599	pool_mask = ~BIT(VMDQ_P(0) % 32);
 600	vlvfb_mask = BIT(vf % 32);
 601
 602	/* post increment loop, covers VLVF_ENTRIES - 1 to 0 */
 603	for (i = IXGBE_VLVF_ENTRIES; i--;) {
 604		u32 bits[2], vlvfb, vid, vfta, vlvf;
 605		u32 word = i * 2 + vf / 32;
 606		u32 mask;
 607
 608		vlvfb = IXGBE_READ_REG(hw, IXGBE_VLVFB(word));
 609
 610		/* if our bit isn't set we can skip it */
 611		if (!(vlvfb & vlvfb_mask))
 612			continue;
 613
 614		/* clear our bit from vlvfb */
 615		vlvfb ^= vlvfb_mask;
 616
 617		/* create 64b mask to chedk to see if we should clear VLVF */
 618		bits[word % 2] = vlvfb;
 619		bits[~word % 2] = IXGBE_READ_REG(hw, IXGBE_VLVFB(word ^ 1));
 620
 621		/* if other pools are present, just remove ourselves */
 622		if (bits[(VMDQ_P(0) / 32) ^ 1] ||
 623		    (bits[VMDQ_P(0) / 32] & pool_mask))
 624			goto update_vlvfb;
 625
 626		/* if PF is present, leave VFTA */
 627		if (bits[0] || bits[1])
 628			goto update_vlvf;
 629
 630		/* if we cannot determine VLAN just remove ourselves */
 631		vlvf = IXGBE_READ_REG(hw, IXGBE_VLVF(i));
 632		if (!vlvf)
 633			goto update_vlvfb;
 634
 635		vid = vlvf & VLAN_VID_MASK;
 636		mask = BIT(vid % 32);
 637
 638		/* clear bit from VFTA */
 639		vfta = IXGBE_READ_REG(hw, IXGBE_VFTA(vid / 32));
 640		if (vfta & mask)
 641			IXGBE_WRITE_REG(hw, IXGBE_VFTA(vid / 32), vfta ^ mask);
 642update_vlvf:
 643		/* clear POOL selection enable */
 644		IXGBE_WRITE_REG(hw, IXGBE_VLVF(i), 0);
 645
 646		if (!(adapter->flags2 & IXGBE_FLAG2_VLAN_PROMISC))
 647			vlvfb = 0;
 648update_vlvfb:
 649		/* clear pool bits */
 650		IXGBE_WRITE_REG(hw, IXGBE_VLVFB(word), vlvfb);
 651	}
 652}
 653
 654static int ixgbe_set_vf_macvlan(struct ixgbe_adapter *adapter,
 655				int vf, int index, unsigned char *mac_addr)
 656{
 657	struct vf_macvlans *entry;
 658	struct list_head *pos;
 659	int retval = 0;
 660
 661	if (index <= 1) {
 662		list_for_each(pos, &adapter->vf_mvs.l) {
 663			entry = list_entry(pos, struct vf_macvlans, l);
 664			if (entry->vf == vf) {
 665				entry->vf = -1;
 666				entry->free = true;
 667				entry->is_macvlan = false;
 668				ixgbe_del_mac_filter(adapter,
 669						     entry->vf_macvlan, vf);
 670			}
 671		}
 672	}
 673
 674	/*
 675	 * If index was zero then we were asked to clear the uc list
 676	 * for the VF.  We're done.
 677	 */
 678	if (!index)
 679		return 0;
 680
 681	entry = NULL;
 682
 683	list_for_each(pos, &adapter->vf_mvs.l) {
 684		entry = list_entry(pos, struct vf_macvlans, l);
 685		if (entry->free)
 686			break;
 687	}
 688
 689	/*
 690	 * If we traversed the entire list and didn't find a free entry
 691	 * then we're out of space on the RAR table.  Also entry may
 692	 * be NULL because the original memory allocation for the list
 693	 * failed, which is not fatal but does mean we can't support
 694	 * VF requests for MACVLAN because we couldn't allocate
 695	 * memory for the list management required.
 696	 */
 697	if (!entry || !entry->free)
 698		return -ENOSPC;
 699
 700	retval = ixgbe_add_mac_filter(adapter, mac_addr, vf);
 701	if (retval < 0)
 702		return retval;
 703
 704	entry->free = false;
 705	entry->is_macvlan = true;
 706	entry->vf = vf;
 707	memcpy(entry->vf_macvlan, mac_addr, ETH_ALEN);
 708
 709	return 0;
 710}
 711
 712static inline void ixgbe_vf_reset_event(struct ixgbe_adapter *adapter, u32 vf)
 713{
 714	struct ixgbe_hw *hw = &adapter->hw;
 715	struct vf_data_storage *vfinfo = &adapter->vfinfo[vf];
 716	u8 num_tcs = adapter->hw_tcs;
 717
 718	/* remove VLAN filters beloning to this VF */
 719	ixgbe_clear_vf_vlans(adapter, vf);
 720
 721	/* add back PF assigned VLAN or VLAN 0 */
 722	ixgbe_set_vf_vlan(adapter, true, vfinfo->pf_vlan, vf);
 723
 724	/* reset offloads to defaults */
 725	ixgbe_set_vmolr(hw, vf, !vfinfo->pf_vlan);
 726
 727	/* set outgoing tags for VFs */
 728	if (!vfinfo->pf_vlan && !vfinfo->pf_qos && !num_tcs) {
 729		ixgbe_clear_vmvir(adapter, vf);
 730	} else {
 731		if (vfinfo->pf_qos || !num_tcs)
 732			ixgbe_set_vmvir(adapter, vfinfo->pf_vlan,
 733					vfinfo->pf_qos, vf);
 734		else
 735			ixgbe_set_vmvir(adapter, vfinfo->pf_vlan,
 736					adapter->default_up, vf);
 737
 738		if (vfinfo->spoofchk_enabled)
 739			hw->mac.ops.set_vlan_anti_spoofing(hw, true, vf);
 740	}
 741
 742	/* reset multicast table array for vf */
 743	adapter->vfinfo[vf].num_vf_mc_hashes = 0;
 744
 745	/* Flush and reset the mta with the new values */
 746	ixgbe_set_rx_mode(adapter->netdev);
 747
 748	ixgbe_del_mac_filter(adapter, adapter->vfinfo[vf].vf_mac_addresses, vf);
 749	ixgbe_set_vf_macvlan(adapter, vf, 0, NULL);
 750
 751	/* reset VF api back to unknown */
 752	adapter->vfinfo[vf].vf_api = ixgbe_mbox_api_10;
 753}
 754
 755static int ixgbe_set_vf_mac(struct ixgbe_adapter *adapter,
 756			    int vf, unsigned char *mac_addr)
 757{
 758	s32 retval;
 759
 760	ixgbe_del_mac_filter(adapter, adapter->vfinfo[vf].vf_mac_addresses, vf);
 761	retval = ixgbe_add_mac_filter(adapter, mac_addr, vf);
 762	if (retval >= 0)
 763		memcpy(adapter->vfinfo[vf].vf_mac_addresses, mac_addr,
 764		       ETH_ALEN);
 765	else
 766		memset(adapter->vfinfo[vf].vf_mac_addresses, 0, ETH_ALEN);
 767
 768	return retval;
 769}
 770
 771int ixgbe_vf_configuration(struct pci_dev *pdev, unsigned int event_mask)
 772{
 773	struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
 774	unsigned int vfn = (event_mask & 0x3f);
 775
 776	bool enable = ((event_mask & 0x10000000U) != 0);
 777
 778	if (enable)
 779		eth_zero_addr(adapter->vfinfo[vfn].vf_mac_addresses);
 780
 781	return 0;
 782}
 783
 784static inline void ixgbe_write_qde(struct ixgbe_adapter *adapter, u32 vf,
 785				   u32 qde)
 786{
 787	struct ixgbe_hw *hw = &adapter->hw;
 788	struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ];
 789	u32 q_per_pool = __ALIGN_MASK(1, ~vmdq->mask);
 790	int i;
 791
 792	for (i = vf * q_per_pool; i < ((vf + 1) * q_per_pool); i++) {
 793		u32 reg;
 794
 795		/* flush previous write */
 796		IXGBE_WRITE_FLUSH(hw);
 797
 798		/* indicate to hardware that we want to set drop enable */
 799		reg = IXGBE_QDE_WRITE | qde;
 800		reg |= i <<  IXGBE_QDE_IDX_SHIFT;
 801		IXGBE_WRITE_REG(hw, IXGBE_QDE, reg);
 802	}
 803}
 804
 805static int ixgbe_vf_reset_msg(struct ixgbe_adapter *adapter, u32 vf)
 806{
 807	struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ];
 808	struct ixgbe_hw *hw = &adapter->hw;
 809	unsigned char *vf_mac = adapter->vfinfo[vf].vf_mac_addresses;
 810	u32 reg, reg_offset, vf_shift;
 811	u32 msgbuf[4] = {0, 0, 0, 0};
 812	u8 *addr = (u8 *)(&msgbuf[1]);
 813	u32 q_per_pool = __ALIGN_MASK(1, ~vmdq->mask);
 814	int i;
 815
 816	e_info(probe, "VF Reset msg received from vf %d\n", vf);
 817
 818	/* reset the filters for the device */
 819	ixgbe_vf_reset_event(adapter, vf);
 820
 821	/* set vf mac address */
 822	if (!is_zero_ether_addr(vf_mac))
 823		ixgbe_set_vf_mac(adapter, vf, vf_mac);
 824
 825	vf_shift = vf % 32;
 826	reg_offset = vf / 32;
 827
 828	/* enable transmit for vf */
 829	reg = IXGBE_READ_REG(hw, IXGBE_VFTE(reg_offset));
 830	reg |= BIT(vf_shift);
 831	IXGBE_WRITE_REG(hw, IXGBE_VFTE(reg_offset), reg);
 832
 833	/* force drop enable for all VF Rx queues */
 834	reg = IXGBE_QDE_ENABLE;
 835	if (adapter->vfinfo[vf].pf_vlan)
 836		reg |= IXGBE_QDE_HIDE_VLAN;
 837
 838	ixgbe_write_qde(adapter, vf, reg);
 839
 840	/* enable receive for vf */
 841	reg = IXGBE_READ_REG(hw, IXGBE_VFRE(reg_offset));
 842	reg |= BIT(vf_shift);
 843	/*
 844	 * The 82599 cannot support a mix of jumbo and non-jumbo PF/VFs.
 845	 * For more info take a look at ixgbe_set_vf_lpe
 846	 */
 847	if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
 848		struct net_device *dev = adapter->netdev;
 849		int pf_max_frame = dev->mtu + ETH_HLEN;
 850
 851#ifdef CONFIG_FCOE
 852		if (dev->features & NETIF_F_FCOE_MTU)
 853			pf_max_frame = max_t(int, pf_max_frame,
 854					     IXGBE_FCOE_JUMBO_FRAME_SIZE);
 855
 856#endif /* CONFIG_FCOE */
 857		if (pf_max_frame > ETH_FRAME_LEN)
 858			reg &= ~BIT(vf_shift);
 859	}
 860	IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), reg);
 861
 862	/* enable VF mailbox for further messages */
 863	adapter->vfinfo[vf].clear_to_send = true;
 864
 865	/* Enable counting of spoofed packets in the SSVPC register */
 866	reg = IXGBE_READ_REG(hw, IXGBE_VMECM(reg_offset));
 867	reg |= BIT(vf_shift);
 868	IXGBE_WRITE_REG(hw, IXGBE_VMECM(reg_offset), reg);
 869
 870	/*
 871	 * Reset the VFs TDWBAL and TDWBAH registers
 872	 * which are not cleared by an FLR
 873	 */
 874	for (i = 0; i < q_per_pool; i++) {
 875		IXGBE_WRITE_REG(hw, IXGBE_PVFTDWBAHn(q_per_pool, vf, i), 0);
 876		IXGBE_WRITE_REG(hw, IXGBE_PVFTDWBALn(q_per_pool, vf, i), 0);
 877	}
 878
 879	/* reply to reset with ack and vf mac address */
 880	msgbuf[0] = IXGBE_VF_RESET;
 881	if (!is_zero_ether_addr(vf_mac)) {
 882		msgbuf[0] |= IXGBE_VT_MSGTYPE_ACK;
 883		memcpy(addr, vf_mac, ETH_ALEN);
 884	} else {
 885		msgbuf[0] |= IXGBE_VT_MSGTYPE_NACK;
 886		dev_warn(&adapter->pdev->dev,
 887			 "VF %d has no MAC address assigned, you may have to assign one manually\n",
 888			 vf);
 889	}
 890
 891	/*
 892	 * Piggyback the multicast filter type so VF can compute the
 893	 * correct vectors
 894	 */
 895	msgbuf[3] = hw->mac.mc_filter_type;
 896	ixgbe_write_mbx(hw, msgbuf, IXGBE_VF_PERMADDR_MSG_LEN, vf);
 897
 898	return 0;
 899}
 900
 901static int ixgbe_set_vf_mac_addr(struct ixgbe_adapter *adapter,
 902				 u32 *msgbuf, u32 vf)
 903{
 904	u8 *new_mac = ((u8 *)(&msgbuf[1]));
 905
 906	if (!is_valid_ether_addr(new_mac)) {
 907		e_warn(drv, "VF %d attempted to set invalid mac\n", vf);
 908		return -1;
 909	}
 910
 911	if (adapter->vfinfo[vf].pf_set_mac && !adapter->vfinfo[vf].trusted &&
 912	    !ether_addr_equal(adapter->vfinfo[vf].vf_mac_addresses, new_mac)) {
 913		e_warn(drv,
 914		       "VF %d attempted to override administratively set MAC address\n"
 915		       "Reload the VF driver to resume operations\n",
 916		       vf);
 917		return -1;
 918	}
 919
 920	return ixgbe_set_vf_mac(adapter, vf, new_mac) < 0;
 921}
 922
 923static int ixgbe_set_vf_vlan_msg(struct ixgbe_adapter *adapter,
 924				 u32 *msgbuf, u32 vf)
 925{
 926	u32 add = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK) >> IXGBE_VT_MSGINFO_SHIFT;
 927	u32 vid = (msgbuf[1] & IXGBE_VLVF_VLANID_MASK);
 928	u8 tcs = adapter->hw_tcs;
 929
 930	if (adapter->vfinfo[vf].pf_vlan || tcs) {
 931		e_warn(drv,
 932		       "VF %d attempted to override administratively set VLAN configuration\n"
 933		       "Reload the VF driver to resume operations\n",
 934		       vf);
 935		return -1;
 936	}
 937
 938	/* VLAN 0 is a special case, don't allow it to be removed */
 939	if (!vid && !add)
 940		return 0;
 941
 942	return ixgbe_set_vf_vlan(adapter, add, vid, vf);
 943}
 944
 945static int ixgbe_set_vf_macvlan_msg(struct ixgbe_adapter *adapter,
 946				    u32 *msgbuf, u32 vf)
 947{
 948	u8 *new_mac = ((u8 *)(&msgbuf[1]));
 949	int index = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK) >>
 950		    IXGBE_VT_MSGINFO_SHIFT;
 951	int err;
 952
 953	if (adapter->vfinfo[vf].pf_set_mac && !adapter->vfinfo[vf].trusted &&
 954	    index > 0) {
 955		e_warn(drv,
 956		       "VF %d requested MACVLAN filter but is administratively denied\n",
 957		       vf);
 958		return -1;
 959	}
 960
 961	/* An non-zero index indicates the VF is setting a filter */
 962	if (index) {
 963		if (!is_valid_ether_addr(new_mac)) {
 964			e_warn(drv, "VF %d attempted to set invalid mac\n", vf);
 965			return -1;
 966		}
 967
 968		/*
 969		 * If the VF is allowed to set MAC filters then turn off
 970		 * anti-spoofing to avoid false positives.
 971		 */
 972		if (adapter->vfinfo[vf].spoofchk_enabled) {
 973			struct ixgbe_hw *hw = &adapter->hw;
 974
 975			hw->mac.ops.set_mac_anti_spoofing(hw, false, vf);
 976			hw->mac.ops.set_vlan_anti_spoofing(hw, false, vf);
 977		}
 978	}
 979
 980	err = ixgbe_set_vf_macvlan(adapter, vf, index, new_mac);
 981	if (err == -ENOSPC)
 982		e_warn(drv,
 983		       "VF %d has requested a MACVLAN filter but there is no space for it\n",
 984		       vf);
 985
 986	return err < 0;
 987}
 988
 989static int ixgbe_negotiate_vf_api(struct ixgbe_adapter *adapter,
 990				  u32 *msgbuf, u32 vf)
 991{
 992	int api = msgbuf[1];
 993
 994	switch (api) {
 995	case ixgbe_mbox_api_10:
 996	case ixgbe_mbox_api_11:
 997	case ixgbe_mbox_api_12:
 998	case ixgbe_mbox_api_13:
 999		adapter->vfinfo[vf].vf_api = api;
1000		return 0;
1001	default:
1002		break;
1003	}
1004
1005	e_info(drv, "VF %d requested invalid api version %u\n", vf, api);
1006
1007	return -1;
1008}
1009
1010static int ixgbe_get_vf_queues(struct ixgbe_adapter *adapter,
1011			       u32 *msgbuf, u32 vf)
1012{
1013	struct net_device *dev = adapter->netdev;
1014	struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ];
1015	unsigned int default_tc = 0;
1016	u8 num_tcs = adapter->hw_tcs;
1017
1018	/* verify the PF is supporting the correct APIs */
1019	switch (adapter->vfinfo[vf].vf_api) {
1020	case ixgbe_mbox_api_20:
1021	case ixgbe_mbox_api_11:
1022	case ixgbe_mbox_api_12:
1023	case ixgbe_mbox_api_13:
1024		break;
1025	default:
1026		return -1;
1027	}
1028
1029	/* only allow 1 Tx queue for bandwidth limiting */
1030	msgbuf[IXGBE_VF_TX_QUEUES] = __ALIGN_MASK(1, ~vmdq->mask);
1031	msgbuf[IXGBE_VF_RX_QUEUES] = __ALIGN_MASK(1, ~vmdq->mask);
1032
1033	/* if TCs > 1 determine which TC belongs to default user priority */
1034	if (num_tcs > 1)
1035		default_tc = netdev_get_prio_tc_map(dev, adapter->default_up);
1036
1037	/* notify VF of need for VLAN tag stripping, and correct queue */
1038	if (num_tcs)
1039		msgbuf[IXGBE_VF_TRANS_VLAN] = num_tcs;
1040	else if (adapter->vfinfo[vf].pf_vlan || adapter->vfinfo[vf].pf_qos)
1041		msgbuf[IXGBE_VF_TRANS_VLAN] = 1;
1042	else
1043		msgbuf[IXGBE_VF_TRANS_VLAN] = 0;
1044
1045	/* notify VF of default queue */
1046	msgbuf[IXGBE_VF_DEF_QUEUE] = default_tc;
1047
1048	return 0;
1049}
1050
1051static int ixgbe_get_vf_reta(struct ixgbe_adapter *adapter, u32 *msgbuf, u32 vf)
1052{
1053	u32 i, j;
1054	u32 *out_buf = &msgbuf[1];
1055	const u8 *reta = adapter->rss_indir_tbl;
1056	u32 reta_size = ixgbe_rss_indir_tbl_entries(adapter);
1057
1058	/* Check if operation is permitted */
1059	if (!adapter->vfinfo[vf].rss_query_enabled)
1060		return -EPERM;
1061
1062	/* verify the PF is supporting the correct API */
1063	switch (adapter->vfinfo[vf].vf_api) {
1064	case ixgbe_mbox_api_13:
1065	case ixgbe_mbox_api_12:
1066		break;
1067	default:
1068		return -EOPNOTSUPP;
1069	}
1070
1071	/* This mailbox command is supported (required) only for 82599 and x540
1072	 * VFs which support up to 4 RSS queues. Therefore we will compress the
1073	 * RETA by saving only 2 bits from each entry. This way we will be able
1074	 * to transfer the whole RETA in a single mailbox operation.
1075	 */
1076	for (i = 0; i < reta_size / 16; i++) {
1077		out_buf[i] = 0;
1078		for (j = 0; j < 16; j++)
1079			out_buf[i] |= (u32)(reta[16 * i + j] & 0x3) << (2 * j);
1080	}
1081
1082	return 0;
1083}
1084
1085static int ixgbe_get_vf_rss_key(struct ixgbe_adapter *adapter,
1086				u32 *msgbuf, u32 vf)
1087{
1088	u32 *rss_key = &msgbuf[1];
1089
1090	/* Check if the operation is permitted */
1091	if (!adapter->vfinfo[vf].rss_query_enabled)
1092		return -EPERM;
1093
1094	/* verify the PF is supporting the correct API */
1095	switch (adapter->vfinfo[vf].vf_api) {
1096	case ixgbe_mbox_api_13:
1097	case ixgbe_mbox_api_12:
1098		break;
1099	default:
1100		return -EOPNOTSUPP;
1101	}
1102
1103	memcpy(rss_key, adapter->rss_key, IXGBE_RSS_KEY_SIZE);
1104
1105	return 0;
1106}
1107
1108static int ixgbe_update_vf_xcast_mode(struct ixgbe_adapter *adapter,
1109				      u32 *msgbuf, u32 vf)
1110{
1111	struct ixgbe_hw *hw = &adapter->hw;
1112	int xcast_mode = msgbuf[1];
1113	u32 vmolr, fctrl, disable, enable;
1114
1115	/* verify the PF is supporting the correct APIs */
1116	switch (adapter->vfinfo[vf].vf_api) {
1117	case ixgbe_mbox_api_12:
1118		/* promisc introduced in 1.3 version */
1119		if (xcast_mode == IXGBEVF_XCAST_MODE_PROMISC)
1120			return -EOPNOTSUPP;
1121		/* Fall threw */
1122	case ixgbe_mbox_api_13:
1123		break;
1124	default:
1125		return -EOPNOTSUPP;
1126	}
1127
1128	if (xcast_mode > IXGBEVF_XCAST_MODE_MULTI &&
1129	    !adapter->vfinfo[vf].trusted) {
1130		xcast_mode = IXGBEVF_XCAST_MODE_MULTI;
1131	}
1132
1133	if (adapter->vfinfo[vf].xcast_mode == xcast_mode)
1134		goto out;
1135
1136	switch (xcast_mode) {
1137	case IXGBEVF_XCAST_MODE_NONE:
1138		disable = IXGBE_VMOLR_BAM | IXGBE_VMOLR_ROMPE |
1139			  IXGBE_VMOLR_MPE | IXGBE_VMOLR_UPE | IXGBE_VMOLR_VPE;
1140		enable = 0;
1141		break;
1142	case IXGBEVF_XCAST_MODE_MULTI:
1143		disable = IXGBE_VMOLR_MPE | IXGBE_VMOLR_UPE | IXGBE_VMOLR_VPE;
1144		enable = IXGBE_VMOLR_BAM | IXGBE_VMOLR_ROMPE;
1145		break;
1146	case IXGBEVF_XCAST_MODE_ALLMULTI:
1147		disable = IXGBE_VMOLR_UPE | IXGBE_VMOLR_VPE;
1148		enable = IXGBE_VMOLR_BAM | IXGBE_VMOLR_ROMPE | IXGBE_VMOLR_MPE;
1149		break;
1150	case IXGBEVF_XCAST_MODE_PROMISC:
1151		if (hw->mac.type <= ixgbe_mac_82599EB)
1152			return -EOPNOTSUPP;
1153
1154		fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
1155		if (!(fctrl & IXGBE_FCTRL_UPE)) {
1156			/* VF promisc requires PF in promisc */
1157			e_warn(drv,
1158			       "Enabling VF promisc requires PF in promisc\n");
1159			return -EPERM;
1160		}
1161
1162		disable = 0;
1163		enable = IXGBE_VMOLR_BAM | IXGBE_VMOLR_ROMPE |
1164			 IXGBE_VMOLR_MPE | IXGBE_VMOLR_UPE | IXGBE_VMOLR_VPE;
1165		break;
1166	default:
1167		return -EOPNOTSUPP;
1168	}
1169
1170	vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(vf));
1171	vmolr &= ~disable;
1172	vmolr |= enable;
1173	IXGBE_WRITE_REG(hw, IXGBE_VMOLR(vf), vmolr);
1174
1175	adapter->vfinfo[vf].xcast_mode = xcast_mode;
1176
1177out:
1178	msgbuf[1] = xcast_mode;
1179
1180	return 0;
1181}
1182
1183static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
1184{
1185	u32 mbx_size = IXGBE_VFMAILBOX_SIZE;
1186	u32 msgbuf[IXGBE_VFMAILBOX_SIZE];
1187	struct ixgbe_hw *hw = &adapter->hw;
1188	s32 retval;
1189
1190	retval = ixgbe_read_mbx(hw, msgbuf, mbx_size, vf);
1191
1192	if (retval) {
1193		pr_err("Error receiving message from VF\n");
1194		return retval;
1195	}
1196
1197	/* this is a message we already processed, do nothing */
1198	if (msgbuf[0] & (IXGBE_VT_MSGTYPE_ACK | IXGBE_VT_MSGTYPE_NACK))
1199		return 0;
1200
1201	/* flush the ack before we write any messages back */
1202	IXGBE_WRITE_FLUSH(hw);
1203
1204	if (msgbuf[0] == IXGBE_VF_RESET)
1205		return ixgbe_vf_reset_msg(adapter, vf);
1206
1207	/*
1208	 * until the vf completes a virtual function reset it should not be
1209	 * allowed to start any configuration.
1210	 */
1211	if (!adapter->vfinfo[vf].clear_to_send) {
1212		msgbuf[0] |= IXGBE_VT_MSGTYPE_NACK;
1213		ixgbe_write_mbx(hw, msgbuf, 1, vf);
1214		return 0;
1215	}
1216
1217	switch ((msgbuf[0] & 0xFFFF)) {
1218	case IXGBE_VF_SET_MAC_ADDR:
1219		retval = ixgbe_set_vf_mac_addr(adapter, msgbuf, vf);
1220		break;
1221	case IXGBE_VF_SET_MULTICAST:
1222		retval = ixgbe_set_vf_multicasts(adapter, msgbuf, vf);
1223		break;
1224	case IXGBE_VF_SET_VLAN:
1225		retval = ixgbe_set_vf_vlan_msg(adapter, msgbuf, vf);
1226		break;
1227	case IXGBE_VF_SET_LPE:
1228		retval = ixgbe_set_vf_lpe(adapter, msgbuf, vf);
1229		break;
1230	case IXGBE_VF_SET_MACVLAN:
1231		retval = ixgbe_set_vf_macvlan_msg(adapter, msgbuf, vf);
1232		break;
1233	case IXGBE_VF_API_NEGOTIATE:
1234		retval = ixgbe_negotiate_vf_api(adapter, msgbuf, vf);
1235		break;
1236	case IXGBE_VF_GET_QUEUES:
1237		retval = ixgbe_get_vf_queues(adapter, msgbuf, vf);
1238		break;
1239	case IXGBE_VF_GET_RETA:
1240		retval = ixgbe_get_vf_reta(adapter, msgbuf, vf);
1241		break;
1242	case IXGBE_VF_GET_RSS_KEY:
1243		retval = ixgbe_get_vf_rss_key(adapter, msgbuf, vf);
1244		break;
1245	case IXGBE_VF_UPDATE_XCAST_MODE:
1246		retval = ixgbe_update_vf_xcast_mode(adapter, msgbuf, vf);
1247		break;
1248	default:
1249		e_err(drv, "Unhandled Msg %8.8x\n", msgbuf[0]);
1250		retval = IXGBE_ERR_MBX;
1251		break;
1252	}
1253
1254	/* notify the VF of the results of what it sent us */
1255	if (retval)
1256		msgbuf[0] |= IXGBE_VT_MSGTYPE_NACK;
1257	else
1258		msgbuf[0] |= IXGBE_VT_MSGTYPE_ACK;
1259
1260	msgbuf[0] |= IXGBE_VT_MSGTYPE_CTS;
1261
1262	ixgbe_write_mbx(hw, msgbuf, mbx_size, vf);
1263
1264	return retval;
1265}
1266
1267static void ixgbe_rcv_ack_from_vf(struct ixgbe_adapter *adapter, u32 vf)
1268{
1269	struct ixgbe_hw *hw = &adapter->hw;
1270	u32 msg = IXGBE_VT_MSGTYPE_NACK;
1271
1272	/* if device isn't clear to send it shouldn't be reading either */
1273	if (!adapter->vfinfo[vf].clear_to_send)
1274		ixgbe_write_mbx(hw, &msg, 1, vf);
1275}
1276
1277void ixgbe_msg_task(struct ixgbe_adapter *adapter)
1278{
1279	struct ixgbe_hw *hw = &adapter->hw;
1280	u32 vf;
1281
1282	for (vf = 0; vf < adapter->num_vfs; vf++) {
1283		/* process any reset requests */
1284		if (!ixgbe_check_for_rst(hw, vf))
1285			ixgbe_vf_reset_event(adapter, vf);
1286
1287		/* process any messages pending */
1288		if (!ixgbe_check_for_msg(hw, vf))
1289			ixgbe_rcv_msg_from_vf(adapter, vf);
1290
1291		/* process any acks */
1292		if (!ixgbe_check_for_ack(hw, vf))
1293			ixgbe_rcv_ack_from_vf(adapter, vf);
1294	}
1295}
1296
1297void ixgbe_disable_tx_rx(struct ixgbe_adapter *adapter)
1298{
1299	struct ixgbe_hw *hw = &adapter->hw;
1300
1301	/* disable transmit and receive for all vfs */
1302	IXGBE_WRITE_REG(hw, IXGBE_VFTE(0), 0);
1303	IXGBE_WRITE_REG(hw, IXGBE_VFTE(1), 0);
1304
1305	IXGBE_WRITE_REG(hw, IXGBE_VFRE(0), 0);
1306	IXGBE_WRITE_REG(hw, IXGBE_VFRE(1), 0);
1307}
1308
1309static inline void ixgbe_ping_vf(struct ixgbe_adapter *adapter, int vf)
1310{
1311	struct ixgbe_hw *hw = &adapter->hw;
1312	u32 ping;
1313
1314	ping = IXGBE_PF_CONTROL_MSG;
1315	if (adapter->vfinfo[vf].clear_to_send)
1316		ping |= IXGBE_VT_MSGTYPE_CTS;
1317	ixgbe_write_mbx(hw, &ping, 1, vf);
1318}
1319
1320void ixgbe_ping_all_vfs(struct ixgbe_adapter *adapter)
1321{
1322	struct ixgbe_hw *hw = &adapter->hw;
1323	u32 ping;
1324	int i;
1325
1326	for (i = 0 ; i < adapter->num_vfs; i++) {
1327		ping = IXGBE_PF_CONTROL_MSG;
1328		if (adapter->vfinfo[i].clear_to_send)
1329			ping |= IXGBE_VT_MSGTYPE_CTS;
1330		ixgbe_write_mbx(hw, &ping, 1, i);
1331	}
1332}
1333
1334int ixgbe_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac)
1335{
1336	struct ixgbe_adapter *adapter = netdev_priv(netdev);
1337	s32 retval;
1338
1339	if (vf >= adapter->num_vfs)
1340		return -EINVAL;
1341
1342	if (is_valid_ether_addr(mac)) {
1343		dev_info(&adapter->pdev->dev, "setting MAC %pM on VF %d\n",
1344			 mac, vf);
1345		dev_info(&adapter->pdev->dev, "Reload the VF driver to make this change effective.");
1346
1347		retval = ixgbe_set_vf_mac(adapter, vf, mac);
1348		if (retval >= 0) {
1349			adapter->vfinfo[vf].pf_set_mac = true;
1350
1351			if (test_bit(__IXGBE_DOWN, &adapter->state)) {
1352				dev_warn(&adapter->pdev->dev, "The VF MAC address has been set, but the PF device is not up.\n");
1353				dev_warn(&adapter->pdev->dev, "Bring the PF device up before attempting to use the VF device.\n");
1354			}
1355		} else {
1356			dev_warn(&adapter->pdev->dev, "The VF MAC address was NOT set due to invalid or duplicate MAC address.\n");
1357		}
1358	} else if (is_zero_ether_addr(mac)) {
1359		unsigned char *vf_mac_addr =
1360					   adapter->vfinfo[vf].vf_mac_addresses;
1361
1362		/* nothing to do */
1363		if (is_zero_ether_addr(vf_mac_addr))
1364			return 0;
1365
1366		dev_info(&adapter->pdev->dev, "removing MAC on VF %d\n", vf);
1367
1368		retval = ixgbe_del_mac_filter(adapter, vf_mac_addr, vf);
1369		if (retval >= 0) {
1370			adapter->vfinfo[vf].pf_set_mac = false;
1371			memcpy(vf_mac_addr, mac, ETH_ALEN);
1372		} else {
1373			dev_warn(&adapter->pdev->dev, "Could NOT remove the VF MAC address.\n");
1374		}
1375	} else {
1376		retval = -EINVAL;
1377	}
1378
1379	return retval;
1380}
1381
1382static int ixgbe_enable_port_vlan(struct ixgbe_adapter *adapter, int vf,
1383				  u16 vlan, u8 qos)
1384{
1385	struct ixgbe_hw *hw = &adapter->hw;
1386	int err;
1387
1388	err = ixgbe_set_vf_vlan(adapter, true, vlan, vf);
1389	if (err)
1390		goto out;
1391
1392	/* Revoke tagless access via VLAN 0 */
1393	ixgbe_set_vf_vlan(adapter, false, 0, vf);
1394
1395	ixgbe_set_vmvir(adapter, vlan, qos, vf);
1396	ixgbe_set_vmolr(hw, vf, false);
1397
1398	/* enable hide vlan on X550 */
1399	if (hw->mac.type >= ixgbe_mac_X550)
1400		ixgbe_write_qde(adapter, vf, IXGBE_QDE_ENABLE |
1401				IXGBE_QDE_HIDE_VLAN);
1402
1403	adapter->vfinfo[vf].pf_vlan = vlan;
1404	adapter->vfinfo[vf].pf_qos = qos;
1405	dev_info(&adapter->pdev->dev,
1406		 "Setting VLAN %d, QOS 0x%x on VF %d\n", vlan, qos, vf);
1407	if (test_bit(__IXGBE_DOWN, &adapter->state)) {
1408		dev_warn(&adapter->pdev->dev,
1409			 "The VF VLAN has been set, but the PF device is not up.\n");
1410		dev_warn(&adapter->pdev->dev,
1411			 "Bring the PF device up before attempting to use the VF device.\n");
1412	}
1413
1414out:
1415	return err;
1416}
1417
1418static int ixgbe_disable_port_vlan(struct ixgbe_adapter *adapter, int vf)
1419{
1420	struct ixgbe_hw *hw = &adapter->hw;
1421	int err;
1422
1423	err = ixgbe_set_vf_vlan(adapter, false,
1424				adapter->vfinfo[vf].pf_vlan, vf);
1425	/* Restore tagless access via VLAN 0 */
1426	ixgbe_set_vf_vlan(adapter, true, 0, vf);
1427	ixgbe_clear_vmvir(adapter, vf);
1428	ixgbe_set_vmolr(hw, vf, true);
1429
1430	/* disable hide VLAN on X550 */
1431	if (hw->mac.type >= ixgbe_mac_X550)
1432		ixgbe_write_qde(adapter, vf, IXGBE_QDE_ENABLE);
1433
1434	adapter->vfinfo[vf].pf_vlan = 0;
1435	adapter->vfinfo[vf].pf_qos = 0;
1436
1437	return err;
1438}
1439
1440int ixgbe_ndo_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan,
1441			  u8 qos, __be16 vlan_proto)
1442{
1443	int err = 0;
1444	struct ixgbe_adapter *adapter = netdev_priv(netdev);
1445
1446	if ((vf >= adapter->num_vfs) || (vlan > 4095) || (qos > 7))
1447		return -EINVAL;
1448	if (vlan_proto != htons(ETH_P_8021Q))
1449		return -EPROTONOSUPPORT;
1450	if (vlan || qos) {
1451		/* Check if there is already a port VLAN set, if so
1452		 * we have to delete the old one first before we
1453		 * can set the new one.  The usage model had
1454		 * previously assumed the user would delete the
1455		 * old port VLAN before setting a new one but this
1456		 * is not necessarily the case.
1457		 */
1458		if (adapter->vfinfo[vf].pf_vlan)
1459			err = ixgbe_disable_port_vlan(adapter, vf);
1460		if (err)
1461			goto out;
1462		err = ixgbe_enable_port_vlan(adapter, vf, vlan, qos);
1463	} else {
1464		err = ixgbe_disable_port_vlan(adapter, vf);
1465	}
1466
1467out:
1468	return err;
1469}
1470
1471int ixgbe_link_mbps(struct ixgbe_adapter *adapter)
1472{
1473	switch (adapter->link_speed) {
1474	case IXGBE_LINK_SPEED_100_FULL:
1475		return 100;
1476	case IXGBE_LINK_SPEED_1GB_FULL:
1477		return 1000;
1478	case IXGBE_LINK_SPEED_10GB_FULL:
1479		return 10000;
1480	default:
1481		return 0;
1482	}
1483}
1484
1485static void ixgbe_set_vf_rate_limit(struct ixgbe_adapter *adapter, int vf)
1486{
1487	struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ];
1488	struct ixgbe_hw *hw = &adapter->hw;
1489	u32 bcnrc_val = 0;
1490	u16 queue, queues_per_pool;
1491	u16 tx_rate = adapter->vfinfo[vf].tx_rate;
1492
1493	if (tx_rate) {
1494		/* start with base link speed value */
1495		bcnrc_val = adapter->vf_rate_link_speed;
1496
1497		/* Calculate the rate factor values to set */
1498		bcnrc_val <<= IXGBE_RTTBCNRC_RF_INT_SHIFT;
1499		bcnrc_val /= tx_rate;
1500
1501		/* clear everything but the rate factor */
1502		bcnrc_val &= IXGBE_RTTBCNRC_RF_INT_MASK |
1503			     IXGBE_RTTBCNRC_RF_DEC_MASK;
1504
1505		/* enable the rate scheduler */
1506		bcnrc_val |= IXGBE_RTTBCNRC_RS_ENA;
1507	}
1508
1509	/*
1510	 * Set global transmit compensation time to the MMW_SIZE in RTTBCNRM
1511	 * register. Typically MMW_SIZE=0x014 if 9728-byte jumbo is supported
1512	 * and 0x004 otherwise.
1513	 */
1514	switch (hw->mac.type) {
1515	case ixgbe_mac_82599EB:
1516		IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRM, 0x4);
1517		break;
1518	case ixgbe_mac_X540:
1519		IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRM, 0x14);
1520		break;
1521	default:
1522		break;
1523	}
1524
1525	/* determine how many queues per pool based on VMDq mask */
1526	queues_per_pool = __ALIGN_MASK(1, ~vmdq->mask);
1527
1528	/* write value for all Tx queues belonging to VF */
1529	for (queue = 0; queue < queues_per_pool; queue++) {
1530		unsigned int reg_idx = (vf * queues_per_pool) + queue;
1531
1532		IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, reg_idx);
1533		IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRC, bcnrc_val);
1534	}
1535}
1536
1537void ixgbe_check_vf_rate_limit(struct ixgbe_adapter *adapter)
1538{
1539	int i;
1540
1541	/* VF Tx rate limit was not set */
1542	if (!adapter->vf_rate_link_speed)
1543		return;
1544
1545	if (ixgbe_link_mbps(adapter) != adapter->vf_rate_link_speed) {
1546		adapter->vf_rate_link_speed = 0;
1547		dev_info(&adapter->pdev->dev,
1548			 "Link speed has been changed. VF Transmit rate is disabled\n");
1549	}
1550
1551	for (i = 0; i < adapter->num_vfs; i++) {
1552		if (!adapter->vf_rate_link_speed)
1553			adapter->vfinfo[i].tx_rate = 0;
1554
1555		ixgbe_set_vf_rate_limit(adapter, i);
1556	}
1557}
1558
1559int ixgbe_ndo_set_vf_bw(struct net_device *netdev, int vf, int min_tx_rate,
1560			int max_tx_rate)
1561{
1562	struct ixgbe_adapter *adapter = netdev_priv(netdev);
1563	int link_speed;
1564
1565	/* verify VF is active */
1566	if (vf >= adapter->num_vfs)
1567		return -EINVAL;
1568
1569	/* verify link is up */
1570	if (!adapter->link_up)
1571		return -EINVAL;
1572
1573	/* verify we are linked at 10Gbps */
1574	link_speed = ixgbe_link_mbps(adapter);
1575	if (link_speed != 10000)
1576		return -EINVAL;
1577
1578	if (min_tx_rate)
1579		return -EINVAL;
1580
1581	/* rate limit cannot be less than 10Mbs or greater than link speed */
1582	if (max_tx_rate && ((max_tx_rate <= 10) || (max_tx_rate > link_speed)))
1583		return -EINVAL;
1584
1585	/* store values */
1586	adapter->vf_rate_link_speed = link_speed;
1587	adapter->vfinfo[vf].tx_rate = max_tx_rate;
1588
1589	/* update hardware configuration */
1590	ixgbe_set_vf_rate_limit(adapter, vf);
1591
1592	return 0;
1593}
1594
1595int ixgbe_ndo_set_vf_spoofchk(struct net_device *netdev, int vf, bool setting)
1596{
1597	struct ixgbe_adapter *adapter = netdev_priv(netdev);
1598	struct ixgbe_hw *hw = &adapter->hw;
1599
1600	if (vf >= adapter->num_vfs)
1601		return -EINVAL;
1602
1603	adapter->vfinfo[vf].spoofchk_enabled = setting;
1604
1605	/* configure MAC spoofing */
1606	hw->mac.ops.set_mac_anti_spoofing(hw, setting, vf);
1607
1608	/* configure VLAN spoofing */
1609	hw->mac.ops.set_vlan_anti_spoofing(hw, setting, vf);
1610
1611	/* Ensure LLDP and FC is set for Ethertype Antispoofing if we will be
1612	 * calling set_ethertype_anti_spoofing for each VF in loop below
1613	 */
1614	if (hw->mac.ops.set_ethertype_anti_spoofing) {
1615		IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_LLDP),
1616				(IXGBE_ETQF_FILTER_EN    |
1617				 IXGBE_ETQF_TX_ANTISPOOF |
1618				 IXGBE_ETH_P_LLDP));
1619
1620		IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_FC),
1621				(IXGBE_ETQF_FILTER_EN |
1622				 IXGBE_ETQF_TX_ANTISPOOF |
1623				 ETH_P_PAUSE));
1624
1625		hw->mac.ops.set_ethertype_anti_spoofing(hw, setting, vf);
1626	}
1627
1628	return 0;
1629}
1630
1631int ixgbe_ndo_set_vf_rss_query_en(struct net_device *netdev, int vf,
1632				  bool setting)
1633{
1634	struct ixgbe_adapter *adapter = netdev_priv(netdev);
1635
1636	/* This operation is currently supported only for 82599 and x540
1637	 * devices.
1638	 */
1639	if (adapter->hw.mac.type < ixgbe_mac_82599EB ||
1640	    adapter->hw.mac.type >= ixgbe_mac_X550)
1641		return -EOPNOTSUPP;
1642
1643	if (vf >= adapter->num_vfs)
1644		return -EINVAL;
1645
1646	adapter->vfinfo[vf].rss_query_enabled = setting;
1647
1648	return 0;
1649}
1650
1651int ixgbe_ndo_set_vf_trust(struct net_device *netdev, int vf, bool setting)
1652{
1653	struct ixgbe_adapter *adapter = netdev_priv(netdev);
1654
1655	if (vf >= adapter->num_vfs)
1656		return -EINVAL;
1657
1658	/* nothing to do */
1659	if (adapter->vfinfo[vf].trusted == setting)
1660		return 0;
1661
1662	adapter->vfinfo[vf].trusted = setting;
1663
1664	/* reset VF to reconfigure features */
1665	adapter->vfinfo[vf].clear_to_send = false;
1666	ixgbe_ping_vf(adapter, vf);
1667
1668	e_info(drv, "VF %u is %strusted\n", vf, setting ? "" : "not ");
1669
1670	return 0;
1671}
1672
1673int ixgbe_ndo_get_vf_config(struct net_device *netdev,
1674			    int vf, struct ifla_vf_info *ivi)
1675{
1676	struct ixgbe_adapter *adapter = netdev_priv(netdev);
1677	if (vf >= adapter->num_vfs)
1678		return -EINVAL;
1679	ivi->vf = vf;
1680	memcpy(&ivi->mac, adapter->vfinfo[vf].vf_mac_addresses, ETH_ALEN);
1681	ivi->max_tx_rate = adapter->vfinfo[vf].tx_rate;
1682	ivi->min_tx_rate = 0;
1683	ivi->vlan = adapter->vfinfo[vf].pf_vlan;
1684	ivi->qos = adapter->vfinfo[vf].pf_qos;
1685	ivi->spoofchk = adapter->vfinfo[vf].spoofchk_enabled;
1686	ivi->rss_query_en = adapter->vfinfo[vf].rss_query_enabled;
1687	ivi->trusted = adapter->vfinfo[vf].trusted;
1688	return 0;
1689}