Loading...
Note: File does not exist in v3.1.
1/*
2 * extcon-max8997.c - MAX8997 extcon driver to support MAX8997 MUIC
3 *
4 * Copyright (C) 2012 Samsung Electronics
5 * Donggeun Kim <dg77.kim@samsung.com>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 */
17
18#include <linux/kernel.h>
19#include <linux/module.h>
20#include <linux/i2c.h>
21#include <linux/slab.h>
22#include <linux/interrupt.h>
23#include <linux/err.h>
24#include <linux/platform_device.h>
25#include <linux/kobject.h>
26#include <linux/mfd/max8997.h>
27#include <linux/mfd/max8997-private.h>
28#include <linux/extcon-provider.h>
29#include <linux/irqdomain.h>
30
31#define DEV_NAME "max8997-muic"
32#define DELAY_MS_DEFAULT 20000 /* unit: millisecond */
33
34enum max8997_muic_adc_debounce_time {
35 ADC_DEBOUNCE_TIME_0_5MS = 0, /* 0.5ms */
36 ADC_DEBOUNCE_TIME_10MS, /* 10ms */
37 ADC_DEBOUNCE_TIME_25MS, /* 25ms */
38 ADC_DEBOUNCE_TIME_38_62MS, /* 38.62ms */
39};
40
41struct max8997_muic_irq {
42 unsigned int irq;
43 const char *name;
44 unsigned int virq;
45};
46
47static struct max8997_muic_irq muic_irqs[] = {
48 { MAX8997_MUICIRQ_ADCError, "muic-ADCERROR" },
49 { MAX8997_MUICIRQ_ADCLow, "muic-ADCLOW" },
50 { MAX8997_MUICIRQ_ADC, "muic-ADC" },
51 { MAX8997_MUICIRQ_VBVolt, "muic-VBVOLT" },
52 { MAX8997_MUICIRQ_DBChg, "muic-DBCHG" },
53 { MAX8997_MUICIRQ_DCDTmr, "muic-DCDTMR" },
54 { MAX8997_MUICIRQ_ChgDetRun, "muic-CHGDETRUN" },
55 { MAX8997_MUICIRQ_ChgTyp, "muic-CHGTYP" },
56 { MAX8997_MUICIRQ_OVP, "muic-OVP" },
57};
58
59/* Define supported cable type */
60enum max8997_muic_acc_type {
61 MAX8997_MUIC_ADC_GROUND = 0x0,
62 MAX8997_MUIC_ADC_MHL, /* MHL*/
63 MAX8997_MUIC_ADC_REMOTE_S1_BUTTON,
64 MAX8997_MUIC_ADC_REMOTE_S2_BUTTON,
65 MAX8997_MUIC_ADC_REMOTE_S3_BUTTON,
66 MAX8997_MUIC_ADC_REMOTE_S4_BUTTON,
67 MAX8997_MUIC_ADC_REMOTE_S5_BUTTON,
68 MAX8997_MUIC_ADC_REMOTE_S6_BUTTON,
69 MAX8997_MUIC_ADC_REMOTE_S7_BUTTON,
70 MAX8997_MUIC_ADC_REMOTE_S8_BUTTON,
71 MAX8997_MUIC_ADC_REMOTE_S9_BUTTON,
72 MAX8997_MUIC_ADC_REMOTE_S10_BUTTON,
73 MAX8997_MUIC_ADC_REMOTE_S11_BUTTON,
74 MAX8997_MUIC_ADC_REMOTE_S12_BUTTON,
75 MAX8997_MUIC_ADC_RESERVED_ACC_1,
76 MAX8997_MUIC_ADC_RESERVED_ACC_2,
77 MAX8997_MUIC_ADC_RESERVED_ACC_3,
78 MAX8997_MUIC_ADC_RESERVED_ACC_4,
79 MAX8997_MUIC_ADC_RESERVED_ACC_5,
80 MAX8997_MUIC_ADC_CEA936_AUDIO,
81 MAX8997_MUIC_ADC_PHONE_POWERED_DEV,
82 MAX8997_MUIC_ADC_TTY_CONVERTER,
83 MAX8997_MUIC_ADC_UART_CABLE,
84 MAX8997_MUIC_ADC_CEA936A_TYPE1_CHG,
85 MAX8997_MUIC_ADC_FACTORY_MODE_USB_OFF, /* JIG-USB-OFF */
86 MAX8997_MUIC_ADC_FACTORY_MODE_USB_ON, /* JIG-USB-ON */
87 MAX8997_MUIC_ADC_AV_CABLE_NOLOAD, /* DESKDOCK */
88 MAX8997_MUIC_ADC_CEA936A_TYPE2_CHG,
89 MAX8997_MUIC_ADC_FACTORY_MODE_UART_OFF, /* JIG-UART */
90 MAX8997_MUIC_ADC_FACTORY_MODE_UART_ON, /* CARDOCK */
91 MAX8997_MUIC_ADC_AUDIO_MODE_REMOTE,
92 MAX8997_MUIC_ADC_OPEN, /* OPEN */
93};
94
95enum max8997_muic_cable_group {
96 MAX8997_CABLE_GROUP_ADC = 0,
97 MAX8997_CABLE_GROUP_ADC_GND,
98 MAX8997_CABLE_GROUP_CHG,
99 MAX8997_CABLE_GROUP_VBVOLT,
100};
101
102enum max8997_muic_usb_type {
103 MAX8997_USB_HOST,
104 MAX8997_USB_DEVICE,
105};
106
107enum max8997_muic_charger_type {
108 MAX8997_CHARGER_TYPE_NONE = 0,
109 MAX8997_CHARGER_TYPE_USB,
110 MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT,
111 MAX8997_CHARGER_TYPE_DEDICATED_CHG,
112 MAX8997_CHARGER_TYPE_500MA,
113 MAX8997_CHARGER_TYPE_1A,
114 MAX8997_CHARGER_TYPE_DEAD_BATTERY = 7,
115};
116
117struct max8997_muic_info {
118 struct device *dev;
119 struct i2c_client *muic;
120 struct extcon_dev *edev;
121 int prev_cable_type;
122 int prev_chg_type;
123 u8 status[2];
124
125 int irq;
126 struct work_struct irq_work;
127 struct mutex mutex;
128
129 struct max8997_muic_platform_data *muic_pdata;
130 enum max8997_muic_charger_type pre_charger_type;
131
132 /*
133 * Use delayed workqueue to detect cable state and then
134 * notify cable state to notifiee/platform through uevent.
135 * After completing the booting of platform, the extcon provider
136 * driver should notify cable state to upper layer.
137 */
138 struct delayed_work wq_detcable;
139
140 /*
141 * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
142 * h/w path of COMP2/COMN1 on CONTROL1 register.
143 */
144 int path_usb;
145 int path_uart;
146};
147
148static const unsigned int max8997_extcon_cable[] = {
149 EXTCON_USB,
150 EXTCON_USB_HOST,
151 EXTCON_CHG_USB_SDP,
152 EXTCON_CHG_USB_DCP,
153 EXTCON_CHG_USB_FAST,
154 EXTCON_CHG_USB_SLOW,
155 EXTCON_CHG_USB_CDP,
156 EXTCON_DISP_MHL,
157 EXTCON_DOCK,
158 EXTCON_JIG,
159 EXTCON_NONE,
160};
161
162/*
163 * max8997_muic_set_debounce_time - Set the debounce time of ADC
164 * @info: the instance including private data of max8997 MUIC
165 * @time: the debounce time of ADC
166 */
167static int max8997_muic_set_debounce_time(struct max8997_muic_info *info,
168 enum max8997_muic_adc_debounce_time time)
169{
170 int ret;
171
172 switch (time) {
173 case ADC_DEBOUNCE_TIME_0_5MS:
174 case ADC_DEBOUNCE_TIME_10MS:
175 case ADC_DEBOUNCE_TIME_25MS:
176 case ADC_DEBOUNCE_TIME_38_62MS:
177 ret = max8997_update_reg(info->muic,
178 MAX8997_MUIC_REG_CONTROL3,
179 time << CONTROL3_ADCDBSET_SHIFT,
180 CONTROL3_ADCDBSET_MASK);
181 if (ret) {
182 dev_err(info->dev, "failed to set ADC debounce time\n");
183 return ret;
184 }
185 break;
186 default:
187 dev_err(info->dev, "invalid ADC debounce time\n");
188 return -EINVAL;
189 }
190
191 return 0;
192};
193
194/*
195 * max8997_muic_set_path - Set hardware line according to attached cable
196 * @info: the instance including private data of max8997 MUIC
197 * @value: the path according to attached cable
198 * @attached: the state of cable (true:attached, false:detached)
199 *
200 * The max8997 MUIC device share outside H/W line among a varity of cables,
201 * so this function set internal path of H/W line according to the type of
202 * attached cable.
203 */
204static int max8997_muic_set_path(struct max8997_muic_info *info,
205 u8 val, bool attached)
206{
207 int ret;
208 u8 ctrl1, ctrl2 = 0;
209
210 if (attached)
211 ctrl1 = val;
212 else
213 ctrl1 = CONTROL1_SW_OPEN;
214
215 ret = max8997_update_reg(info->muic,
216 MAX8997_MUIC_REG_CONTROL1, ctrl1, COMP_SW_MASK);
217 if (ret < 0) {
218 dev_err(info->dev, "failed to update MUIC register\n");
219 return ret;
220 }
221
222 if (attached)
223 ctrl2 |= CONTROL2_CPEN_MASK; /* LowPwr=0, CPEn=1 */
224 else
225 ctrl2 |= CONTROL2_LOWPWR_MASK; /* LowPwr=1, CPEn=0 */
226
227 ret = max8997_update_reg(info->muic,
228 MAX8997_MUIC_REG_CONTROL2, ctrl2,
229 CONTROL2_LOWPWR_MASK | CONTROL2_CPEN_MASK);
230 if (ret < 0) {
231 dev_err(info->dev, "failed to update MUIC register\n");
232 return ret;
233 }
234
235 dev_info(info->dev,
236 "CONTROL1 : 0x%02x, CONTROL2 : 0x%02x, state : %s\n",
237 ctrl1, ctrl2, attached ? "attached" : "detached");
238
239 return 0;
240}
241
242/*
243 * max8997_muic_get_cable_type - Return cable type and check cable state
244 * @info: the instance including private data of max8997 MUIC
245 * @group: the path according to attached cable
246 * @attached: store cable state and return
247 *
248 * This function check the cable state either attached or detached,
249 * and then divide precise type of cable according to cable group.
250 * - MAX8997_CABLE_GROUP_ADC
251 * - MAX8997_CABLE_GROUP_CHG
252 */
253static int max8997_muic_get_cable_type(struct max8997_muic_info *info,
254 enum max8997_muic_cable_group group, bool *attached)
255{
256 int cable_type = 0;
257 int adc;
258 int chg_type;
259
260 switch (group) {
261 case MAX8997_CABLE_GROUP_ADC:
262 /*
263 * Read ADC value to check cable type and decide cable state
264 * according to cable type
265 */
266 adc = info->status[0] & STATUS1_ADC_MASK;
267 adc >>= STATUS1_ADC_SHIFT;
268
269 /*
270 * Check current cable state/cable type and store cable type
271 * (info->prev_cable_type) for handling cable when cable is
272 * detached.
273 */
274 if (adc == MAX8997_MUIC_ADC_OPEN) {
275 *attached = false;
276
277 cable_type = info->prev_cable_type;
278 info->prev_cable_type = MAX8997_MUIC_ADC_OPEN;
279 } else {
280 *attached = true;
281
282 cable_type = info->prev_cable_type = adc;
283 }
284 break;
285 case MAX8997_CABLE_GROUP_CHG:
286 /*
287 * Read charger type to check cable type and decide cable state
288 * according to type of charger cable.
289 */
290 chg_type = info->status[1] & STATUS2_CHGTYP_MASK;
291 chg_type >>= STATUS2_CHGTYP_SHIFT;
292
293 if (chg_type == MAX8997_CHARGER_TYPE_NONE) {
294 *attached = false;
295
296 cable_type = info->prev_chg_type;
297 info->prev_chg_type = MAX8997_CHARGER_TYPE_NONE;
298 } else {
299 *attached = true;
300
301 /*
302 * Check current cable state/cable type and store cable
303 * type(info->prev_chg_type) for handling cable when
304 * charger cable is detached.
305 */
306 cable_type = info->prev_chg_type = chg_type;
307 }
308
309 break;
310 default:
311 dev_err(info->dev, "Unknown cable group (%d)\n", group);
312 cable_type = -EINVAL;
313 break;
314 }
315
316 return cable_type;
317}
318
319static int max8997_muic_handle_usb(struct max8997_muic_info *info,
320 enum max8997_muic_usb_type usb_type, bool attached)
321{
322 int ret = 0;
323
324 if (usb_type == MAX8997_USB_HOST) {
325 ret = max8997_muic_set_path(info, info->path_usb, attached);
326 if (ret < 0) {
327 dev_err(info->dev, "failed to update muic register\n");
328 return ret;
329 }
330 }
331
332 switch (usb_type) {
333 case MAX8997_USB_HOST:
334 extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached);
335 break;
336 case MAX8997_USB_DEVICE:
337 extcon_set_state_sync(info->edev, EXTCON_USB, attached);
338 extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
339 attached);
340 break;
341 default:
342 dev_err(info->dev, "failed to detect %s usb cable\n",
343 attached ? "attached" : "detached");
344 return -EINVAL;
345 }
346
347 return 0;
348}
349
350static int max8997_muic_handle_dock(struct max8997_muic_info *info,
351 int cable_type, bool attached)
352{
353 int ret = 0;
354
355 ret = max8997_muic_set_path(info, CONTROL1_SW_AUDIO, attached);
356 if (ret) {
357 dev_err(info->dev, "failed to update muic register\n");
358 return ret;
359 }
360
361 switch (cable_type) {
362 case MAX8997_MUIC_ADC_AV_CABLE_NOLOAD:
363 case MAX8997_MUIC_ADC_FACTORY_MODE_UART_ON:
364 extcon_set_state_sync(info->edev, EXTCON_DOCK, attached);
365 break;
366 default:
367 dev_err(info->dev, "failed to detect %s dock device\n",
368 attached ? "attached" : "detached");
369 return -EINVAL;
370 }
371
372 return 0;
373}
374
375static int max8997_muic_handle_jig_uart(struct max8997_muic_info *info,
376 bool attached)
377{
378 int ret = 0;
379
380 /* switch to UART */
381 ret = max8997_muic_set_path(info, info->path_uart, attached);
382 if (ret) {
383 dev_err(info->dev, "failed to update muic register\n");
384 return ret;
385 }
386
387 extcon_set_state_sync(info->edev, EXTCON_JIG, attached);
388
389 return 0;
390}
391
392static int max8997_muic_adc_handler(struct max8997_muic_info *info)
393{
394 int cable_type;
395 bool attached;
396 int ret = 0;
397
398 /* Check cable state which is either detached or attached */
399 cable_type = max8997_muic_get_cable_type(info,
400 MAX8997_CABLE_GROUP_ADC, &attached);
401
402 switch (cable_type) {
403 case MAX8997_MUIC_ADC_GROUND:
404 ret = max8997_muic_handle_usb(info, MAX8997_USB_HOST, attached);
405 if (ret < 0)
406 return ret;
407 break;
408 case MAX8997_MUIC_ADC_MHL:
409 extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached);
410 break;
411 case MAX8997_MUIC_ADC_FACTORY_MODE_USB_OFF:
412 case MAX8997_MUIC_ADC_FACTORY_MODE_USB_ON:
413 ret = max8997_muic_handle_usb(info,
414 MAX8997_USB_DEVICE, attached);
415 if (ret < 0)
416 return ret;
417 break;
418 case MAX8997_MUIC_ADC_AV_CABLE_NOLOAD:
419 case MAX8997_MUIC_ADC_FACTORY_MODE_UART_ON:
420 ret = max8997_muic_handle_dock(info, cable_type, attached);
421 if (ret < 0)
422 return ret;
423 break;
424 case MAX8997_MUIC_ADC_FACTORY_MODE_UART_OFF:
425 ret = max8997_muic_handle_jig_uart(info, attached);
426 break;
427 case MAX8997_MUIC_ADC_REMOTE_S1_BUTTON:
428 case MAX8997_MUIC_ADC_REMOTE_S2_BUTTON:
429 case MAX8997_MUIC_ADC_REMOTE_S3_BUTTON:
430 case MAX8997_MUIC_ADC_REMOTE_S4_BUTTON:
431 case MAX8997_MUIC_ADC_REMOTE_S5_BUTTON:
432 case MAX8997_MUIC_ADC_REMOTE_S6_BUTTON:
433 case MAX8997_MUIC_ADC_REMOTE_S7_BUTTON:
434 case MAX8997_MUIC_ADC_REMOTE_S8_BUTTON:
435 case MAX8997_MUIC_ADC_REMOTE_S9_BUTTON:
436 case MAX8997_MUIC_ADC_REMOTE_S10_BUTTON:
437 case MAX8997_MUIC_ADC_REMOTE_S11_BUTTON:
438 case MAX8997_MUIC_ADC_REMOTE_S12_BUTTON:
439 case MAX8997_MUIC_ADC_RESERVED_ACC_1:
440 case MAX8997_MUIC_ADC_RESERVED_ACC_2:
441 case MAX8997_MUIC_ADC_RESERVED_ACC_3:
442 case MAX8997_MUIC_ADC_RESERVED_ACC_4:
443 case MAX8997_MUIC_ADC_RESERVED_ACC_5:
444 case MAX8997_MUIC_ADC_CEA936_AUDIO:
445 case MAX8997_MUIC_ADC_PHONE_POWERED_DEV:
446 case MAX8997_MUIC_ADC_TTY_CONVERTER:
447 case MAX8997_MUIC_ADC_UART_CABLE:
448 case MAX8997_MUIC_ADC_CEA936A_TYPE1_CHG:
449 case MAX8997_MUIC_ADC_CEA936A_TYPE2_CHG:
450 case MAX8997_MUIC_ADC_AUDIO_MODE_REMOTE:
451 /*
452 * This cable isn't used in general case if it is specially
453 * needed to detect additional cable, should implement
454 * proper operation when this cable is attached/detached.
455 */
456 dev_info(info->dev,
457 "cable is %s but it isn't used (type:0x%x)\n",
458 attached ? "attached" : "detached", cable_type);
459 return -EAGAIN;
460 default:
461 dev_err(info->dev,
462 "failed to detect %s unknown cable (type:0x%x)\n",
463 attached ? "attached" : "detached", cable_type);
464 return -EINVAL;
465 }
466
467 return 0;
468}
469
470static int max8997_muic_chg_handler(struct max8997_muic_info *info)
471{
472 int chg_type;
473 bool attached;
474 int adc;
475
476 chg_type = max8997_muic_get_cable_type(info,
477 MAX8997_CABLE_GROUP_CHG, &attached);
478
479 switch (chg_type) {
480 case MAX8997_CHARGER_TYPE_NONE:
481 break;
482 case MAX8997_CHARGER_TYPE_USB:
483 adc = info->status[0] & STATUS1_ADC_MASK;
484 adc >>= STATUS1_ADC_SHIFT;
485
486 if ((adc & STATUS1_ADC_MASK) == MAX8997_MUIC_ADC_OPEN) {
487 max8997_muic_handle_usb(info,
488 MAX8997_USB_DEVICE, attached);
489 }
490 break;
491 case MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT:
492 extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP,
493 attached);
494 break;
495 case MAX8997_CHARGER_TYPE_DEDICATED_CHG:
496 extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
497 attached);
498 break;
499 case MAX8997_CHARGER_TYPE_500MA:
500 extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW,
501 attached);
502 break;
503 case MAX8997_CHARGER_TYPE_1A:
504 extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST,
505 attached);
506 break;
507 default:
508 dev_err(info->dev,
509 "failed to detect %s unknown chg cable (type:0x%x)\n",
510 attached ? "attached" : "detached", chg_type);
511 return -EINVAL;
512 }
513
514 return 0;
515}
516
517static void max8997_muic_irq_work(struct work_struct *work)
518{
519 struct max8997_muic_info *info = container_of(work,
520 struct max8997_muic_info, irq_work);
521 int irq_type = 0;
522 int i, ret;
523
524 if (!info->edev)
525 return;
526
527 mutex_lock(&info->mutex);
528
529 for (i = 0; i < ARRAY_SIZE(muic_irqs); i++)
530 if (info->irq == muic_irqs[i].virq)
531 irq_type = muic_irqs[i].irq;
532
533 ret = max8997_bulk_read(info->muic, MAX8997_MUIC_REG_STATUS1,
534 2, info->status);
535 if (ret) {
536 dev_err(info->dev, "failed to read muic register\n");
537 mutex_unlock(&info->mutex);
538 return;
539 }
540
541 switch (irq_type) {
542 case MAX8997_MUICIRQ_ADCError:
543 case MAX8997_MUICIRQ_ADCLow:
544 case MAX8997_MUICIRQ_ADC:
545 /* Handle all of cable except for charger cable */
546 ret = max8997_muic_adc_handler(info);
547 break;
548 case MAX8997_MUICIRQ_VBVolt:
549 case MAX8997_MUICIRQ_DBChg:
550 case MAX8997_MUICIRQ_DCDTmr:
551 case MAX8997_MUICIRQ_ChgDetRun:
552 case MAX8997_MUICIRQ_ChgTyp:
553 /* Handle charger cable */
554 ret = max8997_muic_chg_handler(info);
555 break;
556 case MAX8997_MUICIRQ_OVP:
557 break;
558 default:
559 dev_info(info->dev, "misc interrupt: irq %d occurred\n",
560 irq_type);
561 mutex_unlock(&info->mutex);
562 return;
563 }
564
565 if (ret < 0)
566 dev_err(info->dev, "failed to handle MUIC interrupt\n");
567
568 mutex_unlock(&info->mutex);
569}
570
571static irqreturn_t max8997_muic_irq_handler(int irq, void *data)
572{
573 struct max8997_muic_info *info = data;
574
575 dev_dbg(info->dev, "irq:%d\n", irq);
576 info->irq = irq;
577
578 schedule_work(&info->irq_work);
579
580 return IRQ_HANDLED;
581}
582
583static int max8997_muic_detect_dev(struct max8997_muic_info *info)
584{
585 int ret = 0;
586 int adc;
587 int chg_type;
588 bool attached;
589
590 mutex_lock(&info->mutex);
591
592 /* Read STATUSx register to detect accessory */
593 ret = max8997_bulk_read(info->muic,
594 MAX8997_MUIC_REG_STATUS1, 2, info->status);
595 if (ret) {
596 dev_err(info->dev, "failed to read MUIC register\n");
597 mutex_unlock(&info->mutex);
598 return ret;
599 }
600
601 adc = max8997_muic_get_cable_type(info, MAX8997_CABLE_GROUP_ADC,
602 &attached);
603 if (attached && adc != MAX8997_MUIC_ADC_OPEN) {
604 ret = max8997_muic_adc_handler(info);
605 if (ret < 0) {
606 dev_err(info->dev, "Cannot detect ADC cable\n");
607 mutex_unlock(&info->mutex);
608 return ret;
609 }
610 }
611
612 chg_type = max8997_muic_get_cable_type(info, MAX8997_CABLE_GROUP_CHG,
613 &attached);
614 if (attached && chg_type != MAX8997_CHARGER_TYPE_NONE) {
615 ret = max8997_muic_chg_handler(info);
616 if (ret < 0) {
617 dev_err(info->dev, "Cannot detect charger cable\n");
618 mutex_unlock(&info->mutex);
619 return ret;
620 }
621 }
622
623 mutex_unlock(&info->mutex);
624
625 return 0;
626}
627
628static void max8997_muic_detect_cable_wq(struct work_struct *work)
629{
630 struct max8997_muic_info *info = container_of(to_delayed_work(work),
631 struct max8997_muic_info, wq_detcable);
632 int ret;
633
634 ret = max8997_muic_detect_dev(info);
635 if (ret < 0)
636 dev_err(info->dev, "failed to detect cable type\n");
637}
638
639static int max8997_muic_probe(struct platform_device *pdev)
640{
641 struct max8997_dev *max8997 = dev_get_drvdata(pdev->dev.parent);
642 struct max8997_platform_data *pdata = dev_get_platdata(max8997->dev);
643 struct max8997_muic_info *info;
644 int delay_jiffies;
645 int ret, i;
646
647 info = devm_kzalloc(&pdev->dev, sizeof(struct max8997_muic_info),
648 GFP_KERNEL);
649 if (!info)
650 return -ENOMEM;
651
652 info->dev = &pdev->dev;
653 info->muic = max8997->muic;
654
655 platform_set_drvdata(pdev, info);
656 mutex_init(&info->mutex);
657
658 INIT_WORK(&info->irq_work, max8997_muic_irq_work);
659
660 for (i = 0; i < ARRAY_SIZE(muic_irqs); i++) {
661 struct max8997_muic_irq *muic_irq = &muic_irqs[i];
662 unsigned int virq = 0;
663
664 virq = irq_create_mapping(max8997->irq_domain, muic_irq->irq);
665 if (!virq) {
666 ret = -EINVAL;
667 goto err_irq;
668 }
669 muic_irq->virq = virq;
670
671 ret = request_threaded_irq(virq, NULL,
672 max8997_muic_irq_handler,
673 IRQF_NO_SUSPEND,
674 muic_irq->name, info);
675 if (ret) {
676 dev_err(&pdev->dev,
677 "failed: irq request (IRQ: %d, error :%d)\n",
678 muic_irq->irq, ret);
679 goto err_irq;
680 }
681 }
682
683 /* External connector */
684 info->edev = devm_extcon_dev_allocate(&pdev->dev, max8997_extcon_cable);
685 if (IS_ERR(info->edev)) {
686 dev_err(&pdev->dev, "failed to allocate memory for extcon\n");
687 ret = -ENOMEM;
688 goto err_irq;
689 }
690
691 ret = devm_extcon_dev_register(&pdev->dev, info->edev);
692 if (ret) {
693 dev_err(&pdev->dev, "failed to register extcon device\n");
694 goto err_irq;
695 }
696
697 if (pdata && pdata->muic_pdata) {
698 struct max8997_muic_platform_data *muic_pdata
699 = pdata->muic_pdata;
700
701 /* Initialize registers according to platform data */
702 for (i = 0; i < muic_pdata->num_init_data; i++) {
703 max8997_write_reg(info->muic,
704 muic_pdata->init_data[i].addr,
705 muic_pdata->init_data[i].data);
706 }
707
708 /*
709 * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
710 * h/w path of COMP2/COMN1 on CONTROL1 register.
711 */
712 if (muic_pdata->path_uart)
713 info->path_uart = muic_pdata->path_uart;
714 else
715 info->path_uart = CONTROL1_SW_UART;
716
717 if (muic_pdata->path_usb)
718 info->path_usb = muic_pdata->path_usb;
719 else
720 info->path_usb = CONTROL1_SW_USB;
721
722 /*
723 * Default delay time for detecting cable state
724 * after certain time.
725 */
726 if (muic_pdata->detcable_delay_ms)
727 delay_jiffies =
728 msecs_to_jiffies(muic_pdata->detcable_delay_ms);
729 else
730 delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
731 } else {
732 info->path_uart = CONTROL1_SW_UART;
733 info->path_usb = CONTROL1_SW_USB;
734 delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
735 }
736
737 /* Set initial path for UART */
738 max8997_muic_set_path(info, info->path_uart, true);
739
740 /* Set ADC debounce time */
741 max8997_muic_set_debounce_time(info, ADC_DEBOUNCE_TIME_25MS);
742
743 /*
744 * Detect accessory after completing the initialization of platform
745 *
746 * - Use delayed workqueue to detect cable state and then
747 * notify cable state to notifiee/platform through uevent.
748 * After completing the booting of platform, the extcon provider
749 * driver should notify cable state to upper layer.
750 */
751 INIT_DELAYED_WORK(&info->wq_detcable, max8997_muic_detect_cable_wq);
752 queue_delayed_work(system_power_efficient_wq, &info->wq_detcable,
753 delay_jiffies);
754
755 return 0;
756
757err_irq:
758 while (--i >= 0)
759 free_irq(muic_irqs[i].virq, info);
760 return ret;
761}
762
763static int max8997_muic_remove(struct platform_device *pdev)
764{
765 struct max8997_muic_info *info = platform_get_drvdata(pdev);
766 int i;
767
768 for (i = 0; i < ARRAY_SIZE(muic_irqs); i++)
769 free_irq(muic_irqs[i].virq, info);
770 cancel_work_sync(&info->irq_work);
771
772 return 0;
773}
774
775static struct platform_driver max8997_muic_driver = {
776 .driver = {
777 .name = DEV_NAME,
778 },
779 .probe = max8997_muic_probe,
780 .remove = max8997_muic_remove,
781};
782
783module_platform_driver(max8997_muic_driver);
784
785MODULE_DESCRIPTION("Maxim MAX8997 Extcon driver");
786MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
787MODULE_LICENSE("GPL");