Loading...
Note: File does not exist in v3.1.
1// SPDX-License-Identifier: GPL-2.0+
2
3#define pr_fmt(fmt) "clk-aspeed: " fmt
4
5#include <linux/clk-provider.h>
6#include <linux/mfd/syscon.h>
7#include <linux/of_address.h>
8#include <linux/of_device.h>
9#include <linux/platform_device.h>
10#include <linux/regmap.h>
11#include <linux/reset-controller.h>
12#include <linux/slab.h>
13#include <linux/spinlock.h>
14
15#include <dt-bindings/clock/aspeed-clock.h>
16
17#define ASPEED_NUM_CLKS 35
18
19#define ASPEED_RESET_CTRL 0x04
20#define ASPEED_CLK_SELECTION 0x08
21#define ASPEED_CLK_STOP_CTRL 0x0c
22#define ASPEED_MPLL_PARAM 0x20
23#define ASPEED_HPLL_PARAM 0x24
24#define AST2500_HPLL_BYPASS_EN BIT(20)
25#define AST2400_HPLL_STRAPPED BIT(18)
26#define AST2400_HPLL_BYPASS_EN BIT(17)
27#define ASPEED_MISC_CTRL 0x2c
28#define UART_DIV13_EN BIT(12)
29#define ASPEED_STRAP 0x70
30#define CLKIN_25MHZ_EN BIT(23)
31#define AST2400_CLK_SOURCE_SEL BIT(18)
32#define ASPEED_CLK_SELECTION_2 0xd8
33
34/* Globally visible clocks */
35static DEFINE_SPINLOCK(aspeed_clk_lock);
36
37/* Keeps track of all clocks */
38static struct clk_hw_onecell_data *aspeed_clk_data;
39
40static void __iomem *scu_base;
41
42/**
43 * struct aspeed_gate_data - Aspeed gated clocks
44 * @clock_idx: bit used to gate this clock in the clock register
45 * @reset_idx: bit used to reset this IP in the reset register. -1 if no
46 * reset is required when enabling the clock
47 * @name: the clock name
48 * @parent_name: the name of the parent clock
49 * @flags: standard clock framework flags
50 */
51struct aspeed_gate_data {
52 u8 clock_idx;
53 s8 reset_idx;
54 const char *name;
55 const char *parent_name;
56 unsigned long flags;
57};
58
59/**
60 * struct aspeed_clk_gate - Aspeed specific clk_gate structure
61 * @hw: handle between common and hardware-specific interfaces
62 * @reg: register controlling gate
63 * @clock_idx: bit used to gate this clock in the clock register
64 * @reset_idx: bit used to reset this IP in the reset register. -1 if no
65 * reset is required when enabling the clock
66 * @flags: hardware-specific flags
67 * @lock: register lock
68 *
69 * Some of the clocks in the Aspeed SoC must be put in reset before enabling.
70 * This modified version of clk_gate allows an optional reset bit to be
71 * specified.
72 */
73struct aspeed_clk_gate {
74 struct clk_hw hw;
75 struct regmap *map;
76 u8 clock_idx;
77 s8 reset_idx;
78 u8 flags;
79 spinlock_t *lock;
80};
81
82#define to_aspeed_clk_gate(_hw) container_of(_hw, struct aspeed_clk_gate, hw)
83
84/* TODO: ask Aspeed about the actual parent data */
85static const struct aspeed_gate_data aspeed_gates[] = {
86 /* clk rst name parent flags */
87 [ASPEED_CLK_GATE_ECLK] = { 0, -1, "eclk-gate", "eclk", 0 }, /* Video Engine */
88 [ASPEED_CLK_GATE_GCLK] = { 1, 7, "gclk-gate", NULL, 0 }, /* 2D engine */
89 [ASPEED_CLK_GATE_MCLK] = { 2, -1, "mclk-gate", "mpll", CLK_IS_CRITICAL }, /* SDRAM */
90 [ASPEED_CLK_GATE_VCLK] = { 3, 6, "vclk-gate", NULL, 0 }, /* Video Capture */
91 [ASPEED_CLK_GATE_BCLK] = { 4, 10, "bclk-gate", "bclk", 0 }, /* PCIe/PCI */
92 [ASPEED_CLK_GATE_DCLK] = { 5, -1, "dclk-gate", NULL, 0 }, /* DAC */
93 [ASPEED_CLK_GATE_REFCLK] = { 6, -1, "refclk-gate", "clkin", CLK_IS_CRITICAL },
94 [ASPEED_CLK_GATE_USBPORT2CLK] = { 7, 3, "usb-port2-gate", NULL, 0 }, /* USB2.0 Host port 2 */
95 [ASPEED_CLK_GATE_LCLK] = { 8, 5, "lclk-gate", NULL, 0 }, /* LPC */
96 [ASPEED_CLK_GATE_USBUHCICLK] = { 9, 15, "usb-uhci-gate", NULL, 0 }, /* USB1.1 (requires port 2 enabled) */
97 [ASPEED_CLK_GATE_D1CLK] = { 10, 13, "d1clk-gate", NULL, 0 }, /* GFX CRT */
98 [ASPEED_CLK_GATE_YCLK] = { 13, 4, "yclk-gate", NULL, 0 }, /* HAC */
99 [ASPEED_CLK_GATE_USBPORT1CLK] = { 14, 14, "usb-port1-gate", NULL, 0 }, /* USB2 hub/USB2 host port 1/USB1.1 dev */
100 [ASPEED_CLK_GATE_UART1CLK] = { 15, -1, "uart1clk-gate", "uart", 0 }, /* UART1 */
101 [ASPEED_CLK_GATE_UART2CLK] = { 16, -1, "uart2clk-gate", "uart", 0 }, /* UART2 */
102 [ASPEED_CLK_GATE_UART5CLK] = { 17, -1, "uart5clk-gate", "uart", 0 }, /* UART5 */
103 [ASPEED_CLK_GATE_ESPICLK] = { 19, -1, "espiclk-gate", NULL, 0 }, /* eSPI */
104 [ASPEED_CLK_GATE_MAC1CLK] = { 20, 11, "mac1clk-gate", "mac", 0 }, /* MAC1 */
105 [ASPEED_CLK_GATE_MAC2CLK] = { 21, 12, "mac2clk-gate", "mac", 0 }, /* MAC2 */
106 [ASPEED_CLK_GATE_RSACLK] = { 24, -1, "rsaclk-gate", NULL, 0 }, /* RSA */
107 [ASPEED_CLK_GATE_UART3CLK] = { 25, -1, "uart3clk-gate", "uart", 0 }, /* UART3 */
108 [ASPEED_CLK_GATE_UART4CLK] = { 26, -1, "uart4clk-gate", "uart", 0 }, /* UART4 */
109 [ASPEED_CLK_GATE_SDCLKCLK] = { 27, 16, "sdclk-gate", NULL, 0 }, /* SDIO/SD */
110 [ASPEED_CLK_GATE_LHCCLK] = { 28, -1, "lhclk-gate", "lhclk", 0 }, /* LPC master/LPC+ */
111};
112
113static const struct clk_div_table ast2500_mac_div_table[] = {
114 { 0x0, 4 }, /* Yep, really. Aspeed confirmed this is correct */
115 { 0x1, 4 },
116 { 0x2, 6 },
117 { 0x3, 8 },
118 { 0x4, 10 },
119 { 0x5, 12 },
120 { 0x6, 14 },
121 { 0x7, 16 },
122 { 0 }
123};
124
125static const struct clk_div_table ast2400_div_table[] = {
126 { 0x0, 2 },
127 { 0x1, 4 },
128 { 0x2, 6 },
129 { 0x3, 8 },
130 { 0x4, 10 },
131 { 0x5, 12 },
132 { 0x6, 14 },
133 { 0x7, 16 },
134 { 0 }
135};
136
137static const struct clk_div_table ast2500_div_table[] = {
138 { 0x0, 4 },
139 { 0x1, 8 },
140 { 0x2, 12 },
141 { 0x3, 16 },
142 { 0x4, 20 },
143 { 0x5, 24 },
144 { 0x6, 28 },
145 { 0x7, 32 },
146 { 0 }
147};
148
149static struct clk_hw *aspeed_ast2400_calc_pll(const char *name, u32 val)
150{
151 unsigned int mult, div;
152
153 if (val & AST2400_HPLL_BYPASS_EN) {
154 /* Pass through mode */
155 mult = div = 1;
156 } else {
157 /* F = 24Mhz * (2-OD) * [(N + 2) / (D + 1)] */
158 u32 n = (val >> 5) & 0x3f;
159 u32 od = (val >> 4) & 0x1;
160 u32 d = val & 0xf;
161
162 mult = (2 - od) * (n + 2);
163 div = d + 1;
164 }
165 return clk_hw_register_fixed_factor(NULL, name, "clkin", 0,
166 mult, div);
167};
168
169static struct clk_hw *aspeed_ast2500_calc_pll(const char *name, u32 val)
170{
171 unsigned int mult, div;
172
173 if (val & AST2500_HPLL_BYPASS_EN) {
174 /* Pass through mode */
175 mult = div = 1;
176 } else {
177 /* F = clkin * [(M+1) / (N+1)] / (P + 1) */
178 u32 p = (val >> 13) & 0x3f;
179 u32 m = (val >> 5) & 0xff;
180 u32 n = val & 0x1f;
181
182 mult = (m + 1) / (n + 1);
183 div = p + 1;
184 }
185
186 return clk_hw_register_fixed_factor(NULL, name, "clkin", 0,
187 mult, div);
188}
189
190struct aspeed_clk_soc_data {
191 const struct clk_div_table *div_table;
192 const struct clk_div_table *mac_div_table;
193 struct clk_hw *(*calc_pll)(const char *name, u32 val);
194};
195
196static const struct aspeed_clk_soc_data ast2500_data = {
197 .div_table = ast2500_div_table,
198 .mac_div_table = ast2500_mac_div_table,
199 .calc_pll = aspeed_ast2500_calc_pll,
200};
201
202static const struct aspeed_clk_soc_data ast2400_data = {
203 .div_table = ast2400_div_table,
204 .mac_div_table = ast2400_div_table,
205 .calc_pll = aspeed_ast2400_calc_pll,
206};
207
208static int aspeed_clk_is_enabled(struct clk_hw *hw)
209{
210 struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
211 u32 clk = BIT(gate->clock_idx);
212 u32 enval = (gate->flags & CLK_GATE_SET_TO_DISABLE) ? 0 : clk;
213 u32 reg;
214
215 regmap_read(gate->map, ASPEED_CLK_STOP_CTRL, ®);
216
217 return ((reg & clk) == enval) ? 1 : 0;
218}
219
220static int aspeed_clk_enable(struct clk_hw *hw)
221{
222 struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
223 unsigned long flags;
224 u32 clk = BIT(gate->clock_idx);
225 u32 rst = BIT(gate->reset_idx);
226 u32 enval;
227
228 spin_lock_irqsave(gate->lock, flags);
229
230 if (aspeed_clk_is_enabled(hw)) {
231 spin_unlock_irqrestore(gate->lock, flags);
232 return 0;
233 }
234
235 if (gate->reset_idx >= 0) {
236 /* Put IP in reset */
237 regmap_update_bits(gate->map, ASPEED_RESET_CTRL, rst, rst);
238
239 /* Delay 100us */
240 udelay(100);
241 }
242
243 /* Enable clock */
244 enval = (gate->flags & CLK_GATE_SET_TO_DISABLE) ? 0 : clk;
245 regmap_update_bits(gate->map, ASPEED_CLK_STOP_CTRL, clk, enval);
246
247 if (gate->reset_idx >= 0) {
248 /* A delay of 10ms is specified by the ASPEED docs */
249 mdelay(10);
250
251 /* Take IP out of reset */
252 regmap_update_bits(gate->map, ASPEED_RESET_CTRL, rst, 0);
253 }
254
255 spin_unlock_irqrestore(gate->lock, flags);
256
257 return 0;
258}
259
260static void aspeed_clk_disable(struct clk_hw *hw)
261{
262 struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
263 unsigned long flags;
264 u32 clk = BIT(gate->clock_idx);
265 u32 enval;
266
267 spin_lock_irqsave(gate->lock, flags);
268
269 enval = (gate->flags & CLK_GATE_SET_TO_DISABLE) ? clk : 0;
270 regmap_update_bits(gate->map, ASPEED_CLK_STOP_CTRL, clk, enval);
271
272 spin_unlock_irqrestore(gate->lock, flags);
273}
274
275static const struct clk_ops aspeed_clk_gate_ops = {
276 .enable = aspeed_clk_enable,
277 .disable = aspeed_clk_disable,
278 .is_enabled = aspeed_clk_is_enabled,
279};
280
281/**
282 * struct aspeed_reset - Aspeed reset controller
283 * @map: regmap to access the containing system controller
284 * @rcdev: reset controller device
285 */
286struct aspeed_reset {
287 struct regmap *map;
288 struct reset_controller_dev rcdev;
289};
290
291#define to_aspeed_reset(p) container_of((p), struct aspeed_reset, rcdev)
292
293static const u8 aspeed_resets[] = {
294 [ASPEED_RESET_XDMA] = 25,
295 [ASPEED_RESET_MCTP] = 24,
296 [ASPEED_RESET_ADC] = 23,
297 [ASPEED_RESET_JTAG_MASTER] = 22,
298 [ASPEED_RESET_MIC] = 18,
299 [ASPEED_RESET_PWM] = 9,
300 [ASPEED_RESET_PCIVGA] = 8,
301 [ASPEED_RESET_I2C] = 2,
302 [ASPEED_RESET_AHB] = 1,
303};
304
305static int aspeed_reset_deassert(struct reset_controller_dev *rcdev,
306 unsigned long id)
307{
308 struct aspeed_reset *ar = to_aspeed_reset(rcdev);
309 u32 rst = BIT(aspeed_resets[id]);
310
311 return regmap_update_bits(ar->map, ASPEED_RESET_CTRL, rst, 0);
312}
313
314static int aspeed_reset_assert(struct reset_controller_dev *rcdev,
315 unsigned long id)
316{
317 struct aspeed_reset *ar = to_aspeed_reset(rcdev);
318 u32 rst = BIT(aspeed_resets[id]);
319
320 return regmap_update_bits(ar->map, ASPEED_RESET_CTRL, rst, rst);
321}
322
323static int aspeed_reset_status(struct reset_controller_dev *rcdev,
324 unsigned long id)
325{
326 struct aspeed_reset *ar = to_aspeed_reset(rcdev);
327 u32 val, rst = BIT(aspeed_resets[id]);
328 int ret;
329
330 ret = regmap_read(ar->map, ASPEED_RESET_CTRL, &val);
331 if (ret)
332 return ret;
333
334 return !!(val & rst);
335}
336
337static const struct reset_control_ops aspeed_reset_ops = {
338 .assert = aspeed_reset_assert,
339 .deassert = aspeed_reset_deassert,
340 .status = aspeed_reset_status,
341};
342
343static struct clk_hw *aspeed_clk_hw_register_gate(struct device *dev,
344 const char *name, const char *parent_name, unsigned long flags,
345 struct regmap *map, u8 clock_idx, u8 reset_idx,
346 u8 clk_gate_flags, spinlock_t *lock)
347{
348 struct aspeed_clk_gate *gate;
349 struct clk_init_data init;
350 struct clk_hw *hw;
351 int ret;
352
353 gate = kzalloc(sizeof(*gate), GFP_KERNEL);
354 if (!gate)
355 return ERR_PTR(-ENOMEM);
356
357 init.name = name;
358 init.ops = &aspeed_clk_gate_ops;
359 init.flags = flags;
360 init.parent_names = parent_name ? &parent_name : NULL;
361 init.num_parents = parent_name ? 1 : 0;
362
363 gate->map = map;
364 gate->clock_idx = clock_idx;
365 gate->reset_idx = reset_idx;
366 gate->flags = clk_gate_flags;
367 gate->lock = lock;
368 gate->hw.init = &init;
369
370 hw = &gate->hw;
371 ret = clk_hw_register(dev, hw);
372 if (ret) {
373 kfree(gate);
374 hw = ERR_PTR(ret);
375 }
376
377 return hw;
378}
379
380static int aspeed_clk_probe(struct platform_device *pdev)
381{
382 const struct aspeed_clk_soc_data *soc_data;
383 struct device *dev = &pdev->dev;
384 struct aspeed_reset *ar;
385 struct regmap *map;
386 struct clk_hw *hw;
387 u32 val, rate;
388 int i, ret;
389
390 map = syscon_node_to_regmap(dev->of_node);
391 if (IS_ERR(map)) {
392 dev_err(dev, "no syscon regmap\n");
393 return PTR_ERR(map);
394 }
395
396 ar = devm_kzalloc(dev, sizeof(*ar), GFP_KERNEL);
397 if (!ar)
398 return -ENOMEM;
399
400 ar->map = map;
401 ar->rcdev.owner = THIS_MODULE;
402 ar->rcdev.nr_resets = ARRAY_SIZE(aspeed_resets);
403 ar->rcdev.ops = &aspeed_reset_ops;
404 ar->rcdev.of_node = dev->of_node;
405
406 ret = devm_reset_controller_register(dev, &ar->rcdev);
407 if (ret) {
408 dev_err(dev, "could not register reset controller\n");
409 return ret;
410 }
411
412 /* SoC generations share common layouts but have different divisors */
413 soc_data = of_device_get_match_data(dev);
414 if (!soc_data) {
415 dev_err(dev, "no match data for platform\n");
416 return -EINVAL;
417 }
418
419 /* UART clock div13 setting */
420 regmap_read(map, ASPEED_MISC_CTRL, &val);
421 if (val & UART_DIV13_EN)
422 rate = 24000000 / 13;
423 else
424 rate = 24000000;
425 /* TODO: Find the parent data for the uart clock */
426 hw = clk_hw_register_fixed_rate(dev, "uart", NULL, 0, rate);
427 if (IS_ERR(hw))
428 return PTR_ERR(hw);
429 aspeed_clk_data->hws[ASPEED_CLK_UART] = hw;
430
431 /*
432 * Memory controller (M-PLL) PLL. This clock is configured by the
433 * bootloader, and is exposed to Linux as a read-only clock rate.
434 */
435 regmap_read(map, ASPEED_MPLL_PARAM, &val);
436 hw = soc_data->calc_pll("mpll", val);
437 if (IS_ERR(hw))
438 return PTR_ERR(hw);
439 aspeed_clk_data->hws[ASPEED_CLK_MPLL] = hw;
440
441 /* SD/SDIO clock divider (TODO: There's a gate too) */
442 hw = clk_hw_register_divider_table(dev, "sdio", "hpll", 0,
443 scu_base + ASPEED_CLK_SELECTION, 12, 3, 0,
444 soc_data->div_table,
445 &aspeed_clk_lock);
446 if (IS_ERR(hw))
447 return PTR_ERR(hw);
448 aspeed_clk_data->hws[ASPEED_CLK_SDIO] = hw;
449
450 /* MAC AHB bus clock divider */
451 hw = clk_hw_register_divider_table(dev, "mac", "hpll", 0,
452 scu_base + ASPEED_CLK_SELECTION, 16, 3, 0,
453 soc_data->mac_div_table,
454 &aspeed_clk_lock);
455 if (IS_ERR(hw))
456 return PTR_ERR(hw);
457 aspeed_clk_data->hws[ASPEED_CLK_MAC] = hw;
458
459 /* LPC Host (LHCLK) clock divider */
460 hw = clk_hw_register_divider_table(dev, "lhclk", "hpll", 0,
461 scu_base + ASPEED_CLK_SELECTION, 20, 3, 0,
462 soc_data->div_table,
463 &aspeed_clk_lock);
464 if (IS_ERR(hw))
465 return PTR_ERR(hw);
466 aspeed_clk_data->hws[ASPEED_CLK_LHCLK] = hw;
467
468 /* P-Bus (BCLK) clock divider */
469 hw = clk_hw_register_divider_table(dev, "bclk", "hpll", 0,
470 scu_base + ASPEED_CLK_SELECTION_2, 0, 2, 0,
471 soc_data->div_table,
472 &aspeed_clk_lock);
473 if (IS_ERR(hw))
474 return PTR_ERR(hw);
475 aspeed_clk_data->hws[ASPEED_CLK_BCLK] = hw;
476
477 /*
478 * TODO: There are a number of clocks that not included in this driver
479 * as more information is required:
480 * D2-PLL
481 * D-PLL
482 * YCLK
483 * RGMII
484 * RMII
485 * UART[1..5] clock source mux
486 * Video Engine (ECLK) mux and clock divider
487 */
488
489 for (i = 0; i < ARRAY_SIZE(aspeed_gates); i++) {
490 const struct aspeed_gate_data *gd = &aspeed_gates[i];
491 u32 gate_flags;
492
493 /* Special case: the USB port 1 clock (bit 14) is always
494 * working the opposite way from the other ones.
495 */
496 gate_flags = (gd->clock_idx == 14) ? 0 : CLK_GATE_SET_TO_DISABLE;
497 hw = aspeed_clk_hw_register_gate(dev,
498 gd->name,
499 gd->parent_name,
500 gd->flags,
501 map,
502 gd->clock_idx,
503 gd->reset_idx,
504 gate_flags,
505 &aspeed_clk_lock);
506 if (IS_ERR(hw))
507 return PTR_ERR(hw);
508 aspeed_clk_data->hws[i] = hw;
509 }
510
511 return 0;
512};
513
514static const struct of_device_id aspeed_clk_dt_ids[] = {
515 { .compatible = "aspeed,ast2400-scu", .data = &ast2400_data },
516 { .compatible = "aspeed,ast2500-scu", .data = &ast2500_data },
517 { }
518};
519
520static struct platform_driver aspeed_clk_driver = {
521 .probe = aspeed_clk_probe,
522 .driver = {
523 .name = "aspeed-clk",
524 .of_match_table = aspeed_clk_dt_ids,
525 .suppress_bind_attrs = true,
526 },
527};
528builtin_platform_driver(aspeed_clk_driver);
529
530static void __init aspeed_ast2400_cc(struct regmap *map)
531{
532 struct clk_hw *hw;
533 u32 val, freq, div;
534
535 /*
536 * CLKIN is the crystal oscillator, 24, 48 or 25MHz selected by
537 * strapping
538 */
539 regmap_read(map, ASPEED_STRAP, &val);
540 if (val & CLKIN_25MHZ_EN)
541 freq = 25000000;
542 else if (val & AST2400_CLK_SOURCE_SEL)
543 freq = 48000000;
544 else
545 freq = 24000000;
546 hw = clk_hw_register_fixed_rate(NULL, "clkin", NULL, 0, freq);
547 pr_debug("clkin @%u MHz\n", freq / 1000000);
548
549 /*
550 * High-speed PLL clock derived from the crystal. This the CPU clock,
551 * and we assume that it is enabled
552 */
553 regmap_read(map, ASPEED_HPLL_PARAM, &val);
554 WARN(val & AST2400_HPLL_STRAPPED, "hpll is strapped not configured");
555 aspeed_clk_data->hws[ASPEED_CLK_HPLL] = aspeed_ast2400_calc_pll("hpll", val);
556
557 /*
558 * Strap bits 11:10 define the CPU/AHB clock frequency ratio (aka HCLK)
559 * 00: Select CPU:AHB = 1:1
560 * 01: Select CPU:AHB = 2:1
561 * 10: Select CPU:AHB = 4:1
562 * 11: Select CPU:AHB = 3:1
563 */
564 regmap_read(map, ASPEED_STRAP, &val);
565 val = (val >> 10) & 0x3;
566 div = val + 1;
567 if (div == 3)
568 div = 4;
569 else if (div == 4)
570 div = 3;
571 hw = clk_hw_register_fixed_factor(NULL, "ahb", "hpll", 0, 1, div);
572 aspeed_clk_data->hws[ASPEED_CLK_AHB] = hw;
573
574 /* APB clock clock selection register SCU08 (aka PCLK) */
575 hw = clk_hw_register_divider_table(NULL, "apb", "hpll", 0,
576 scu_base + ASPEED_CLK_SELECTION, 23, 3, 0,
577 ast2400_div_table,
578 &aspeed_clk_lock);
579 aspeed_clk_data->hws[ASPEED_CLK_APB] = hw;
580}
581
582static void __init aspeed_ast2500_cc(struct regmap *map)
583{
584 struct clk_hw *hw;
585 u32 val, freq, div;
586
587 /* CLKIN is the crystal oscillator, 24 or 25MHz selected by strapping */
588 regmap_read(map, ASPEED_STRAP, &val);
589 if (val & CLKIN_25MHZ_EN)
590 freq = 25000000;
591 else
592 freq = 24000000;
593 hw = clk_hw_register_fixed_rate(NULL, "clkin", NULL, 0, freq);
594 pr_debug("clkin @%u MHz\n", freq / 1000000);
595
596 /*
597 * High-speed PLL clock derived from the crystal. This the CPU clock,
598 * and we assume that it is enabled
599 */
600 regmap_read(map, ASPEED_HPLL_PARAM, &val);
601 aspeed_clk_data->hws[ASPEED_CLK_HPLL] = aspeed_ast2500_calc_pll("hpll", val);
602
603 /* Strap bits 11:9 define the AXI/AHB clock frequency ratio (aka HCLK)*/
604 regmap_read(map, ASPEED_STRAP, &val);
605 val = (val >> 9) & 0x7;
606 WARN(val == 0, "strapping is zero: cannot determine ahb clock");
607 div = 2 * (val + 1);
608 hw = clk_hw_register_fixed_factor(NULL, "ahb", "hpll", 0, 1, div);
609 aspeed_clk_data->hws[ASPEED_CLK_AHB] = hw;
610
611 /* APB clock clock selection register SCU08 (aka PCLK) */
612 regmap_read(map, ASPEED_CLK_SELECTION, &val);
613 val = (val >> 23) & 0x7;
614 div = 4 * (val + 1);
615 hw = clk_hw_register_fixed_factor(NULL, "apb", "hpll", 0, 1, div);
616 aspeed_clk_data->hws[ASPEED_CLK_APB] = hw;
617};
618
619static void __init aspeed_cc_init(struct device_node *np)
620{
621 struct regmap *map;
622 u32 val;
623 int ret;
624 int i;
625
626 scu_base = of_iomap(np, 0);
627 if (!scu_base)
628 return;
629
630 aspeed_clk_data = kzalloc(sizeof(*aspeed_clk_data) +
631 sizeof(*aspeed_clk_data->hws) * ASPEED_NUM_CLKS,
632 GFP_KERNEL);
633 if (!aspeed_clk_data)
634 return;
635
636 /*
637 * This way all clocks fetched before the platform device probes,
638 * except those we assign here for early use, will be deferred.
639 */
640 for (i = 0; i < ASPEED_NUM_CLKS; i++)
641 aspeed_clk_data->hws[i] = ERR_PTR(-EPROBE_DEFER);
642
643 map = syscon_node_to_regmap(np);
644 if (IS_ERR(map)) {
645 pr_err("no syscon regmap\n");
646 return;
647 }
648 /*
649 * We check that the regmap works on this very first access,
650 * but as this is an MMIO-backed regmap, subsequent regmap
651 * access is not going to fail and we skip error checks from
652 * this point.
653 */
654 ret = regmap_read(map, ASPEED_STRAP, &val);
655 if (ret) {
656 pr_err("failed to read strapping register\n");
657 return;
658 }
659
660 if (of_device_is_compatible(np, "aspeed,ast2400-scu"))
661 aspeed_ast2400_cc(map);
662 else if (of_device_is_compatible(np, "aspeed,ast2500-scu"))
663 aspeed_ast2500_cc(map);
664 else
665 pr_err("unknown platform, failed to add clocks\n");
666
667 aspeed_clk_data->num = ASPEED_NUM_CLKS;
668 ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, aspeed_clk_data);
669 if (ret)
670 pr_err("failed to add DT provider: %d\n", ret);
671};
672CLK_OF_DECLARE_DRIVER(aspeed_cc_g5, "aspeed,ast2500-scu", aspeed_cc_init);
673CLK_OF_DECLARE_DRIVER(aspeed_cc_g4, "aspeed,ast2400-scu", aspeed_cc_init);