Loading...
1/* Driver for USB Mass Storage compliant devices
2 * SCSI layer glue code
3 *
4 * Current development and maintenance by:
5 * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
6 *
7 * Developed with the assistance of:
8 * (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
9 * (c) 2000 Stephen J. Gowdy (SGowdy@lbl.gov)
10 *
11 * Initial work by:
12 * (c) 1999 Michael Gee (michael@linuxspecific.com)
13 *
14 * This driver is based on the 'USB Mass Storage Class' document. This
15 * describes in detail the protocol used to communicate with such
16 * devices. Clearly, the designers had SCSI and ATAPI commands in
17 * mind when they created this document. The commands are all very
18 * similar to commands in the SCSI-II and ATAPI specifications.
19 *
20 * It is important to note that in a number of cases this class
21 * exhibits class-specific exemptions from the USB specification.
22 * Notably the usage of NAK, STALL and ACK differs from the norm, in
23 * that they are used to communicate wait, failed and OK on commands.
24 *
25 * Also, for certain devices, the interrupt endpoint is used to convey
26 * status of a command.
27 *
28 * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
29 * information about this driver.
30 *
31 * This program is free software; you can redistribute it and/or modify it
32 * under the terms of the GNU General Public License as published by the
33 * Free Software Foundation; either version 2, or (at your option) any
34 * later version.
35 *
36 * This program is distributed in the hope that it will be useful, but
37 * WITHOUT ANY WARRANTY; without even the implied warranty of
38 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
39 * General Public License for more details.
40 *
41 * You should have received a copy of the GNU General Public License along
42 * with this program; if not, write to the Free Software Foundation, Inc.,
43 * 675 Mass Ave, Cambridge, MA 02139, USA.
44 */
45
46#include <linux/module.h>
47#include <linux/mutex.h>
48
49#include <scsi/scsi.h>
50#include <scsi/scsi_cmnd.h>
51#include <scsi/scsi_devinfo.h>
52#include <scsi/scsi_device.h>
53#include <scsi/scsi_eh.h>
54
55#include "usb.h"
56#include "scsiglue.h"
57#include "debug.h"
58#include "transport.h"
59#include "protocol.h"
60
61/* Vendor IDs for companies that seem to include the READ CAPACITY bug
62 * in all their devices
63 */
64#define VENDOR_ID_NOKIA 0x0421
65#define VENDOR_ID_NIKON 0x04b0
66#define VENDOR_ID_PENTAX 0x0a17
67#define VENDOR_ID_MOTOROLA 0x22b8
68
69/***********************************************************************
70 * Host functions
71 ***********************************************************************/
72
73static const char* host_info(struct Scsi_Host *host)
74{
75 struct us_data *us = host_to_us(host);
76 return us->scsi_name;
77}
78
79static int slave_alloc (struct scsi_device *sdev)
80{
81 struct us_data *us = host_to_us(sdev->host);
82
83 /*
84 * Set the INQUIRY transfer length to 36. We don't use any of
85 * the extra data and many devices choke if asked for more or
86 * less than 36 bytes.
87 */
88 sdev->inquiry_len = 36;
89
90 /* USB has unusual DMA-alignment requirements: Although the
91 * starting address of each scatter-gather element doesn't matter,
92 * the length of each element except the last must be divisible
93 * by the Bulk maxpacket value. There's currently no way to
94 * express this by block-layer constraints, so we'll cop out
95 * and simply require addresses to be aligned at 512-byte
96 * boundaries. This is okay since most block I/O involves
97 * hardware sectors that are multiples of 512 bytes in length,
98 * and since host controllers up through USB 2.0 have maxpacket
99 * values no larger than 512.
100 *
101 * But it doesn't suffice for Wireless USB, where Bulk maxpacket
102 * values can be as large as 2048. To make that work properly
103 * will require changes to the block layer.
104 */
105 blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));
106
107 /*
108 * The UFI spec treates the Peripheral Qualifier bits in an
109 * INQUIRY result as reserved and requires devices to set them
110 * to 0. However the SCSI spec requires these bits to be set
111 * to 3 to indicate when a LUN is not present.
112 *
113 * Let the scanning code know if this target merely sets
114 * Peripheral Device Type to 0x1f to indicate no LUN.
115 */
116 if (us->subclass == USB_SC_UFI)
117 sdev->sdev_target->pdt_1f_for_no_lun = 1;
118
119 return 0;
120}
121
122static int slave_configure(struct scsi_device *sdev)
123{
124 struct us_data *us = host_to_us(sdev->host);
125
126 /* Many devices have trouble transferring more than 32KB at a time,
127 * while others have trouble with more than 64K. At this time we
128 * are limiting both to 32K (64 sectores).
129 */
130 if (us->fflags & (US_FL_MAX_SECTORS_64 | US_FL_MAX_SECTORS_MIN)) {
131 unsigned int max_sectors = 64;
132
133 if (us->fflags & US_FL_MAX_SECTORS_MIN)
134 max_sectors = PAGE_CACHE_SIZE >> 9;
135 if (queue_max_hw_sectors(sdev->request_queue) > max_sectors)
136 blk_queue_max_hw_sectors(sdev->request_queue,
137 max_sectors);
138 } else if (sdev->type == TYPE_TAPE) {
139 /* Tapes need much higher max_sector limits, so just
140 * raise it to the maximum possible (4 GB / 512) and
141 * let the queue segment size sort out the real limit.
142 */
143 blk_queue_max_hw_sectors(sdev->request_queue, 0x7FFFFF);
144 }
145
146 /* Some USB host controllers can't do DMA; they have to use PIO.
147 * They indicate this by setting their dma_mask to NULL. For
148 * such controllers we need to make sure the block layer sets
149 * up bounce buffers in addressable memory.
150 */
151 if (!us->pusb_dev->bus->controller->dma_mask)
152 blk_queue_bounce_limit(sdev->request_queue, BLK_BOUNCE_HIGH);
153
154 /* We can't put these settings in slave_alloc() because that gets
155 * called before the device type is known. Consequently these
156 * settings can't be overridden via the scsi devinfo mechanism. */
157 if (sdev->type == TYPE_DISK) {
158
159 /* Some vendors seem to put the READ CAPACITY bug into
160 * all their devices -- primarily makers of cell phones
161 * and digital cameras. Since these devices always use
162 * flash media and can be expected to have an even number
163 * of sectors, we will always enable the CAPACITY_HEURISTICS
164 * flag unless told otherwise. */
165 switch (le16_to_cpu(us->pusb_dev->descriptor.idVendor)) {
166 case VENDOR_ID_NOKIA:
167 case VENDOR_ID_NIKON:
168 case VENDOR_ID_PENTAX:
169 case VENDOR_ID_MOTOROLA:
170 if (!(us->fflags & (US_FL_FIX_CAPACITY |
171 US_FL_CAPACITY_OK)))
172 us->fflags |= US_FL_CAPACITY_HEURISTICS;
173 break;
174 }
175
176 /* Disk-type devices use MODE SENSE(6) if the protocol
177 * (SubClass) is Transparent SCSI, otherwise they use
178 * MODE SENSE(10). */
179 if (us->subclass != USB_SC_SCSI && us->subclass != USB_SC_CYP_ATACB)
180 sdev->use_10_for_ms = 1;
181
182 /* Many disks only accept MODE SENSE transfer lengths of
183 * 192 bytes (that's what Windows uses). */
184 sdev->use_192_bytes_for_3f = 1;
185
186 /* Some devices don't like MODE SENSE with page=0x3f,
187 * which is the command used for checking if a device
188 * is write-protected. Now that we tell the sd driver
189 * to do a 192-byte transfer with this command the
190 * majority of devices work fine, but a few still can't
191 * handle it. The sd driver will simply assume those
192 * devices are write-enabled. */
193 if (us->fflags & US_FL_NO_WP_DETECT)
194 sdev->skip_ms_page_3f = 1;
195
196 /* A number of devices have problems with MODE SENSE for
197 * page x08, so we will skip it. */
198 sdev->skip_ms_page_8 = 1;
199
200 /* Some disks return the total number of blocks in response
201 * to READ CAPACITY rather than the highest block number.
202 * If this device makes that mistake, tell the sd driver. */
203 if (us->fflags & US_FL_FIX_CAPACITY)
204 sdev->fix_capacity = 1;
205
206 /* A few disks have two indistinguishable version, one of
207 * which reports the correct capacity and the other does not.
208 * The sd driver has to guess which is the case. */
209 if (us->fflags & US_FL_CAPACITY_HEURISTICS)
210 sdev->guess_capacity = 1;
211
212 /* Some devices cannot handle READ_CAPACITY_16 */
213 if (us->fflags & US_FL_NO_READ_CAPACITY_16)
214 sdev->no_read_capacity_16 = 1;
215
216 /* assume SPC3 or latter devices support sense size > 18 */
217 if (sdev->scsi_level > SCSI_SPC_2)
218 us->fflags |= US_FL_SANE_SENSE;
219
220 /* Some devices report a SCSI revision level above 2 but are
221 * unable to handle the REPORT LUNS command (for which
222 * support is mandatory at level 3). Since we already have
223 * a Get-Max-LUN request, we won't lose much by setting the
224 * revision level down to 2. The only devices that would be
225 * affected are those with sparse LUNs. */
226 if (sdev->scsi_level > SCSI_2)
227 sdev->sdev_target->scsi_level =
228 sdev->scsi_level = SCSI_2;
229
230 /* USB-IDE bridges tend to report SK = 0x04 (Non-recoverable
231 * Hardware Error) when any low-level error occurs,
232 * recoverable or not. Setting this flag tells the SCSI
233 * midlayer to retry such commands, which frequently will
234 * succeed and fix the error. The worst this can lead to
235 * is an occasional series of retries that will all fail. */
236 sdev->retry_hwerror = 1;
237
238 /* USB disks should allow restart. Some drives spin down
239 * automatically, requiring a START-STOP UNIT command. */
240 sdev->allow_restart = 1;
241
242 /* Some USB cardreaders have trouble reading an sdcard's last
243 * sector in a larger then 1 sector read, since the performance
244 * impact is negible we set this flag for all USB disks */
245 sdev->last_sector_bug = 1;
246
247 /* Enable last-sector hacks for single-target devices using
248 * the Bulk-only transport, unless we already know the
249 * capacity will be decremented or is correct. */
250 if (!(us->fflags & (US_FL_FIX_CAPACITY | US_FL_CAPACITY_OK |
251 US_FL_SCM_MULT_TARG)) &&
252 us->protocol == USB_PR_BULK)
253 us->use_last_sector_hacks = 1;
254 } else {
255
256 /* Non-disk-type devices don't need to blacklist any pages
257 * or to force 192-byte transfer lengths for MODE SENSE.
258 * But they do need to use MODE SENSE(10). */
259 sdev->use_10_for_ms = 1;
260
261 /* Some (fake) usb cdrom devices don't like READ_DISC_INFO */
262 if (us->fflags & US_FL_NO_READ_DISC_INFO)
263 sdev->no_read_disc_info = 1;
264 }
265
266 /* The CB and CBI transports have no way to pass LUN values
267 * other than the bits in the second byte of a CDB. But those
268 * bits don't get set to the LUN value if the device reports
269 * scsi_level == 0 (UNKNOWN). Hence such devices must necessarily
270 * be single-LUN.
271 */
272 if ((us->protocol == USB_PR_CB || us->protocol == USB_PR_CBI) &&
273 sdev->scsi_level == SCSI_UNKNOWN)
274 us->max_lun = 0;
275
276 /* Some devices choke when they receive a PREVENT-ALLOW MEDIUM
277 * REMOVAL command, so suppress those commands. */
278 if (us->fflags & US_FL_NOT_LOCKABLE)
279 sdev->lockable = 0;
280
281 /* this is to satisfy the compiler, tho I don't think the
282 * return code is ever checked anywhere. */
283 return 0;
284}
285
286/* queue a command */
287/* This is always called with scsi_lock(host) held */
288static int queuecommand_lck(struct scsi_cmnd *srb,
289 void (*done)(struct scsi_cmnd *))
290{
291 struct us_data *us = host_to_us(srb->device->host);
292
293 US_DEBUGP("%s called\n", __func__);
294
295 /* check for state-transition errors */
296 if (us->srb != NULL) {
297 printk(KERN_ERR USB_STORAGE "Error in %s: us->srb = %p\n",
298 __func__, us->srb);
299 return SCSI_MLQUEUE_HOST_BUSY;
300 }
301
302 /* fail the command if we are disconnecting */
303 if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) {
304 US_DEBUGP("Fail command during disconnect\n");
305 srb->result = DID_NO_CONNECT << 16;
306 done(srb);
307 return 0;
308 }
309
310 /* enqueue the command and wake up the control thread */
311 srb->scsi_done = done;
312 us->srb = srb;
313 complete(&us->cmnd_ready);
314
315 return 0;
316}
317
318static DEF_SCSI_QCMD(queuecommand)
319
320/***********************************************************************
321 * Error handling functions
322 ***********************************************************************/
323
324/* Command timeout and abort */
325static int command_abort(struct scsi_cmnd *srb)
326{
327 struct us_data *us = host_to_us(srb->device->host);
328
329 US_DEBUGP("%s called\n", __func__);
330
331 /* us->srb together with the TIMED_OUT, RESETTING, and ABORTING
332 * bits are protected by the host lock. */
333 scsi_lock(us_to_host(us));
334
335 /* Is this command still active? */
336 if (us->srb != srb) {
337 scsi_unlock(us_to_host(us));
338 US_DEBUGP ("-- nothing to abort\n");
339 return FAILED;
340 }
341
342 /* Set the TIMED_OUT bit. Also set the ABORTING bit, but only if
343 * a device reset isn't already in progress (to avoid interfering
344 * with the reset). Note that we must retain the host lock while
345 * calling usb_stor_stop_transport(); otherwise it might interfere
346 * with an auto-reset that begins as soon as we release the lock. */
347 set_bit(US_FLIDX_TIMED_OUT, &us->dflags);
348 if (!test_bit(US_FLIDX_RESETTING, &us->dflags)) {
349 set_bit(US_FLIDX_ABORTING, &us->dflags);
350 usb_stor_stop_transport(us);
351 }
352 scsi_unlock(us_to_host(us));
353
354 /* Wait for the aborted command to finish */
355 wait_for_completion(&us->notify);
356 return SUCCESS;
357}
358
359/* This invokes the transport reset mechanism to reset the state of the
360 * device */
361static int device_reset(struct scsi_cmnd *srb)
362{
363 struct us_data *us = host_to_us(srb->device->host);
364 int result;
365
366 US_DEBUGP("%s called\n", __func__);
367
368 /* lock the device pointers and do the reset */
369 mutex_lock(&(us->dev_mutex));
370 result = us->transport_reset(us);
371 mutex_unlock(&us->dev_mutex);
372
373 return result < 0 ? FAILED : SUCCESS;
374}
375
376/* Simulate a SCSI bus reset by resetting the device's USB port. */
377static int bus_reset(struct scsi_cmnd *srb)
378{
379 struct us_data *us = host_to_us(srb->device->host);
380 int result;
381
382 US_DEBUGP("%s called\n", __func__);
383 result = usb_stor_port_reset(us);
384 return result < 0 ? FAILED : SUCCESS;
385}
386
387/* Report a driver-initiated device reset to the SCSI layer.
388 * Calling this for a SCSI-initiated reset is unnecessary but harmless.
389 * The caller must own the SCSI host lock. */
390void usb_stor_report_device_reset(struct us_data *us)
391{
392 int i;
393 struct Scsi_Host *host = us_to_host(us);
394
395 scsi_report_device_reset(host, 0, 0);
396 if (us->fflags & US_FL_SCM_MULT_TARG) {
397 for (i = 1; i < host->max_id; ++i)
398 scsi_report_device_reset(host, 0, i);
399 }
400}
401
402/* Report a driver-initiated bus reset to the SCSI layer.
403 * Calling this for a SCSI-initiated reset is unnecessary but harmless.
404 * The caller must not own the SCSI host lock. */
405void usb_stor_report_bus_reset(struct us_data *us)
406{
407 struct Scsi_Host *host = us_to_host(us);
408
409 scsi_lock(host);
410 scsi_report_bus_reset(host, 0);
411 scsi_unlock(host);
412}
413
414/***********************************************************************
415 * /proc/scsi/ functions
416 ***********************************************************************/
417
418/* we use this macro to help us write into the buffer */
419#undef SPRINTF
420#define SPRINTF(args...) \
421 do { if (pos < buffer+length) pos += sprintf(pos, ## args); } while (0)
422
423static int proc_info (struct Scsi_Host *host, char *buffer,
424 char **start, off_t offset, int length, int inout)
425{
426 struct us_data *us = host_to_us(host);
427 char *pos = buffer;
428 const char *string;
429
430 /* if someone is sending us data, just throw it away */
431 if (inout)
432 return length;
433
434 /* print the controller name */
435 SPRINTF(" Host scsi%d: usb-storage\n", host->host_no);
436
437 /* print product, vendor, and serial number strings */
438 if (us->pusb_dev->manufacturer)
439 string = us->pusb_dev->manufacturer;
440 else if (us->unusual_dev->vendorName)
441 string = us->unusual_dev->vendorName;
442 else
443 string = "Unknown";
444 SPRINTF(" Vendor: %s\n", string);
445 if (us->pusb_dev->product)
446 string = us->pusb_dev->product;
447 else if (us->unusual_dev->productName)
448 string = us->unusual_dev->productName;
449 else
450 string = "Unknown";
451 SPRINTF(" Product: %s\n", string);
452 if (us->pusb_dev->serial)
453 string = us->pusb_dev->serial;
454 else
455 string = "None";
456 SPRINTF("Serial Number: %s\n", string);
457
458 /* show the protocol and transport */
459 SPRINTF(" Protocol: %s\n", us->protocol_name);
460 SPRINTF(" Transport: %s\n", us->transport_name);
461
462 /* show the device flags */
463 if (pos < buffer + length) {
464 pos += sprintf(pos, " Quirks:");
465
466#define US_FLAG(name, value) \
467 if (us->fflags & value) pos += sprintf(pos, " " #name);
468US_DO_ALL_FLAGS
469#undef US_FLAG
470
471 *(pos++) = '\n';
472 }
473
474 /*
475 * Calculate start of next buffer, and return value.
476 */
477 *start = buffer + offset;
478
479 if ((pos - buffer) < offset)
480 return (0);
481 else if ((pos - buffer - offset) < length)
482 return (pos - buffer - offset);
483 else
484 return (length);
485}
486
487/***********************************************************************
488 * Sysfs interface
489 ***********************************************************************/
490
491/* Output routine for the sysfs max_sectors file */
492static ssize_t show_max_sectors(struct device *dev, struct device_attribute *attr, char *buf)
493{
494 struct scsi_device *sdev = to_scsi_device(dev);
495
496 return sprintf(buf, "%u\n", queue_max_hw_sectors(sdev->request_queue));
497}
498
499/* Input routine for the sysfs max_sectors file */
500static ssize_t store_max_sectors(struct device *dev, struct device_attribute *attr, const char *buf,
501 size_t count)
502{
503 struct scsi_device *sdev = to_scsi_device(dev);
504 unsigned short ms;
505
506 if (sscanf(buf, "%hu", &ms) > 0) {
507 blk_queue_max_hw_sectors(sdev->request_queue, ms);
508 return count;
509 }
510 return -EINVAL;
511}
512
513static DEVICE_ATTR(max_sectors, S_IRUGO | S_IWUSR, show_max_sectors,
514 store_max_sectors);
515
516static struct device_attribute *sysfs_device_attr_list[] = {
517 &dev_attr_max_sectors,
518 NULL,
519 };
520
521/*
522 * this defines our host template, with which we'll allocate hosts
523 */
524
525struct scsi_host_template usb_stor_host_template = {
526 /* basic userland interface stuff */
527 .name = "usb-storage",
528 .proc_name = "usb-storage",
529 .proc_info = proc_info,
530 .info = host_info,
531
532 /* command interface -- queued only */
533 .queuecommand = queuecommand,
534
535 /* error and abort handlers */
536 .eh_abort_handler = command_abort,
537 .eh_device_reset_handler = device_reset,
538 .eh_bus_reset_handler = bus_reset,
539
540 /* queue commands only, only one command per LUN */
541 .can_queue = 1,
542 .cmd_per_lun = 1,
543
544 /* unknown initiator id */
545 .this_id = -1,
546
547 .slave_alloc = slave_alloc,
548 .slave_configure = slave_configure,
549
550 /* lots of sg segments can be handled */
551 .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS,
552
553 /* limit the total size of a transfer to 120 KB */
554 .max_sectors = 240,
555
556 /* merge commands... this seems to help performance, but
557 * periodically someone should test to see which setting is more
558 * optimal.
559 */
560 .use_clustering = 1,
561
562 /* emulated HBA */
563 .emulated = 1,
564
565 /* we do our own delay after a device or bus reset */
566 .skip_settle_delay = 1,
567
568 /* sysfs device attributes */
569 .sdev_attrs = sysfs_device_attr_list,
570
571 /* module management */
572 .module = THIS_MODULE
573};
574
575/* To Report "Illegal Request: Invalid Field in CDB */
576unsigned char usb_stor_sense_invalidCDB[18] = {
577 [0] = 0x70, /* current error */
578 [2] = ILLEGAL_REQUEST, /* Illegal Request = 0x05 */
579 [7] = 0x0a, /* additional length */
580 [12] = 0x24 /* Invalid Field in CDB */
581};
582EXPORT_SYMBOL_GPL(usb_stor_sense_invalidCDB);
1/*
2 * Driver for USB Mass Storage compliant devices
3 * SCSI layer glue code
4 *
5 * Current development and maintenance by:
6 * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
7 *
8 * Developed with the assistance of:
9 * (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
10 * (c) 2000 Stephen J. Gowdy (SGowdy@lbl.gov)
11 *
12 * Initial work by:
13 * (c) 1999 Michael Gee (michael@linuxspecific.com)
14 *
15 * This driver is based on the 'USB Mass Storage Class' document. This
16 * describes in detail the protocol used to communicate with such
17 * devices. Clearly, the designers had SCSI and ATAPI commands in
18 * mind when they created this document. The commands are all very
19 * similar to commands in the SCSI-II and ATAPI specifications.
20 *
21 * It is important to note that in a number of cases this class
22 * exhibits class-specific exemptions from the USB specification.
23 * Notably the usage of NAK, STALL and ACK differs from the norm, in
24 * that they are used to communicate wait, failed and OK on commands.
25 *
26 * Also, for certain devices, the interrupt endpoint is used to convey
27 * status of a command.
28 *
29 * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
30 * information about this driver.
31 *
32 * This program is free software; you can redistribute it and/or modify it
33 * under the terms of the GNU General Public License as published by the
34 * Free Software Foundation; either version 2, or (at your option) any
35 * later version.
36 *
37 * This program is distributed in the hope that it will be useful, but
38 * WITHOUT ANY WARRANTY; without even the implied warranty of
39 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
40 * General Public License for more details.
41 *
42 * You should have received a copy of the GNU General Public License along
43 * with this program; if not, write to the Free Software Foundation, Inc.,
44 * 675 Mass Ave, Cambridge, MA 02139, USA.
45 */
46
47#include <linux/module.h>
48#include <linux/mutex.h>
49
50#include <scsi/scsi.h>
51#include <scsi/scsi_cmnd.h>
52#include <scsi/scsi_devinfo.h>
53#include <scsi/scsi_device.h>
54#include <scsi/scsi_eh.h>
55
56#include "usb.h"
57#include "scsiglue.h"
58#include "debug.h"
59#include "transport.h"
60#include "protocol.h"
61
62/*
63 * Vendor IDs for companies that seem to include the READ CAPACITY bug
64 * in all their devices
65 */
66#define VENDOR_ID_NOKIA 0x0421
67#define VENDOR_ID_NIKON 0x04b0
68#define VENDOR_ID_PENTAX 0x0a17
69#define VENDOR_ID_MOTOROLA 0x22b8
70
71/***********************************************************************
72 * Host functions
73 ***********************************************************************/
74
75static const char* host_info(struct Scsi_Host *host)
76{
77 struct us_data *us = host_to_us(host);
78 return us->scsi_name;
79}
80
81static int slave_alloc (struct scsi_device *sdev)
82{
83 struct us_data *us = host_to_us(sdev->host);
84
85 /*
86 * Set the INQUIRY transfer length to 36. We don't use any of
87 * the extra data and many devices choke if asked for more or
88 * less than 36 bytes.
89 */
90 sdev->inquiry_len = 36;
91
92 /*
93 * USB has unusual DMA-alignment requirements: Although the
94 * starting address of each scatter-gather element doesn't matter,
95 * the length of each element except the last must be divisible
96 * by the Bulk maxpacket value. There's currently no way to
97 * express this by block-layer constraints, so we'll cop out
98 * and simply require addresses to be aligned at 512-byte
99 * boundaries. This is okay since most block I/O involves
100 * hardware sectors that are multiples of 512 bytes in length,
101 * and since host controllers up through USB 2.0 have maxpacket
102 * values no larger than 512.
103 *
104 * But it doesn't suffice for Wireless USB, where Bulk maxpacket
105 * values can be as large as 2048. To make that work properly
106 * will require changes to the block layer.
107 */
108 blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));
109
110 /* Tell the SCSI layer if we know there is more than one LUN */
111 if (us->protocol == USB_PR_BULK && us->max_lun > 0)
112 sdev->sdev_bflags |= BLIST_FORCELUN;
113
114 return 0;
115}
116
117static int slave_configure(struct scsi_device *sdev)
118{
119 struct us_data *us = host_to_us(sdev->host);
120
121 /*
122 * Many devices have trouble transferring more than 32KB at a time,
123 * while others have trouble with more than 64K. At this time we
124 * are limiting both to 32K (64 sectores).
125 */
126 if (us->fflags & (US_FL_MAX_SECTORS_64 | US_FL_MAX_SECTORS_MIN)) {
127 unsigned int max_sectors = 64;
128
129 if (us->fflags & US_FL_MAX_SECTORS_MIN)
130 max_sectors = PAGE_SIZE >> 9;
131 if (queue_max_hw_sectors(sdev->request_queue) > max_sectors)
132 blk_queue_max_hw_sectors(sdev->request_queue,
133 max_sectors);
134 } else if (sdev->type == TYPE_TAPE) {
135 /*
136 * Tapes need much higher max_sector limits, so just
137 * raise it to the maximum possible (4 GB / 512) and
138 * let the queue segment size sort out the real limit.
139 */
140 blk_queue_max_hw_sectors(sdev->request_queue, 0x7FFFFF);
141 } else if (us->pusb_dev->speed >= USB_SPEED_SUPER) {
142 /*
143 * USB3 devices will be limited to 2048 sectors. This gives us
144 * better throughput on most devices.
145 */
146 blk_queue_max_hw_sectors(sdev->request_queue, 2048);
147 }
148
149 /*
150 * Some USB host controllers can't do DMA; they have to use PIO.
151 * They indicate this by setting their dma_mask to NULL. For
152 * such controllers we need to make sure the block layer sets
153 * up bounce buffers in addressable memory.
154 */
155 if (!us->pusb_dev->bus->controller->dma_mask)
156 blk_queue_bounce_limit(sdev->request_queue, BLK_BOUNCE_HIGH);
157
158 /*
159 * We can't put these settings in slave_alloc() because that gets
160 * called before the device type is known. Consequently these
161 * settings can't be overridden via the scsi devinfo mechanism.
162 */
163 if (sdev->type == TYPE_DISK) {
164
165 /*
166 * Some vendors seem to put the READ CAPACITY bug into
167 * all their devices -- primarily makers of cell phones
168 * and digital cameras. Since these devices always use
169 * flash media and can be expected to have an even number
170 * of sectors, we will always enable the CAPACITY_HEURISTICS
171 * flag unless told otherwise.
172 */
173 switch (le16_to_cpu(us->pusb_dev->descriptor.idVendor)) {
174 case VENDOR_ID_NOKIA:
175 case VENDOR_ID_NIKON:
176 case VENDOR_ID_PENTAX:
177 case VENDOR_ID_MOTOROLA:
178 if (!(us->fflags & (US_FL_FIX_CAPACITY |
179 US_FL_CAPACITY_OK)))
180 us->fflags |= US_FL_CAPACITY_HEURISTICS;
181 break;
182 }
183
184 /*
185 * Disk-type devices use MODE SENSE(6) if the protocol
186 * (SubClass) is Transparent SCSI, otherwise they use
187 * MODE SENSE(10).
188 */
189 if (us->subclass != USB_SC_SCSI && us->subclass != USB_SC_CYP_ATACB)
190 sdev->use_10_for_ms = 1;
191
192 /*
193 *Many disks only accept MODE SENSE transfer lengths of
194 * 192 bytes (that's what Windows uses).
195 */
196 sdev->use_192_bytes_for_3f = 1;
197
198 /*
199 * Some devices don't like MODE SENSE with page=0x3f,
200 * which is the command used for checking if a device
201 * is write-protected. Now that we tell the sd driver
202 * to do a 192-byte transfer with this command the
203 * majority of devices work fine, but a few still can't
204 * handle it. The sd driver will simply assume those
205 * devices are write-enabled.
206 */
207 if (us->fflags & US_FL_NO_WP_DETECT)
208 sdev->skip_ms_page_3f = 1;
209
210 /*
211 * A number of devices have problems with MODE SENSE for
212 * page x08, so we will skip it.
213 */
214 sdev->skip_ms_page_8 = 1;
215
216 /* Some devices don't handle VPD pages correctly */
217 sdev->skip_vpd_pages = 1;
218
219 /* Do not attempt to use REPORT SUPPORTED OPERATION CODES */
220 sdev->no_report_opcodes = 1;
221
222 /* Do not attempt to use WRITE SAME */
223 sdev->no_write_same = 1;
224
225 /*
226 * Some disks return the total number of blocks in response
227 * to READ CAPACITY rather than the highest block number.
228 * If this device makes that mistake, tell the sd driver.
229 */
230 if (us->fflags & US_FL_FIX_CAPACITY)
231 sdev->fix_capacity = 1;
232
233 /*
234 * A few disks have two indistinguishable version, one of
235 * which reports the correct capacity and the other does not.
236 * The sd driver has to guess which is the case.
237 */
238 if (us->fflags & US_FL_CAPACITY_HEURISTICS)
239 sdev->guess_capacity = 1;
240
241 /* Some devices cannot handle READ_CAPACITY_16 */
242 if (us->fflags & US_FL_NO_READ_CAPACITY_16)
243 sdev->no_read_capacity_16 = 1;
244
245 /*
246 * Many devices do not respond properly to READ_CAPACITY_16.
247 * Tell the SCSI layer to try READ_CAPACITY_10 first.
248 * However some USB 3.0 drive enclosures return capacity
249 * modulo 2TB. Those must use READ_CAPACITY_16
250 */
251 if (!(us->fflags & US_FL_NEEDS_CAP16))
252 sdev->try_rc_10_first = 1;
253
254 /* assume SPC3 or latter devices support sense size > 18 */
255 if (sdev->scsi_level > SCSI_SPC_2)
256 us->fflags |= US_FL_SANE_SENSE;
257
258 /*
259 * USB-IDE bridges tend to report SK = 0x04 (Non-recoverable
260 * Hardware Error) when any low-level error occurs,
261 * recoverable or not. Setting this flag tells the SCSI
262 * midlayer to retry such commands, which frequently will
263 * succeed and fix the error. The worst this can lead to
264 * is an occasional series of retries that will all fail.
265 */
266 sdev->retry_hwerror = 1;
267
268 /*
269 * USB disks should allow restart. Some drives spin down
270 * automatically, requiring a START-STOP UNIT command.
271 */
272 sdev->allow_restart = 1;
273
274 /*
275 * Some USB cardreaders have trouble reading an sdcard's last
276 * sector in a larger then 1 sector read, since the performance
277 * impact is negligible we set this flag for all USB disks
278 */
279 sdev->last_sector_bug = 1;
280
281 /*
282 * Enable last-sector hacks for single-target devices using
283 * the Bulk-only transport, unless we already know the
284 * capacity will be decremented or is correct.
285 */
286 if (!(us->fflags & (US_FL_FIX_CAPACITY | US_FL_CAPACITY_OK |
287 US_FL_SCM_MULT_TARG)) &&
288 us->protocol == USB_PR_BULK)
289 us->use_last_sector_hacks = 1;
290
291 /* Check if write cache default on flag is set or not */
292 if (us->fflags & US_FL_WRITE_CACHE)
293 sdev->wce_default_on = 1;
294
295 /* A few buggy USB-ATA bridges don't understand FUA */
296 if (us->fflags & US_FL_BROKEN_FUA)
297 sdev->broken_fua = 1;
298
299 /* Some even totally fail to indicate a cache */
300 if (us->fflags & US_FL_ALWAYS_SYNC) {
301 /* don't read caching information */
302 sdev->skip_ms_page_8 = 1;
303 sdev->skip_ms_page_3f = 1;
304 /* assume sync is needed */
305 sdev->wce_default_on = 1;
306 }
307 } else {
308
309 /*
310 * Non-disk-type devices don't need to blacklist any pages
311 * or to force 192-byte transfer lengths for MODE SENSE.
312 * But they do need to use MODE SENSE(10).
313 */
314 sdev->use_10_for_ms = 1;
315
316 /* Some (fake) usb cdrom devices don't like READ_DISC_INFO */
317 if (us->fflags & US_FL_NO_READ_DISC_INFO)
318 sdev->no_read_disc_info = 1;
319 }
320
321 /*
322 * The CB and CBI transports have no way to pass LUN values
323 * other than the bits in the second byte of a CDB. But those
324 * bits don't get set to the LUN value if the device reports
325 * scsi_level == 0 (UNKNOWN). Hence such devices must necessarily
326 * be single-LUN.
327 */
328 if ((us->protocol == USB_PR_CB || us->protocol == USB_PR_CBI) &&
329 sdev->scsi_level == SCSI_UNKNOWN)
330 us->max_lun = 0;
331
332 /*
333 * Some devices choke when they receive a PREVENT-ALLOW MEDIUM
334 * REMOVAL command, so suppress those commands.
335 */
336 if (us->fflags & US_FL_NOT_LOCKABLE)
337 sdev->lockable = 0;
338
339 /*
340 * this is to satisfy the compiler, tho I don't think the
341 * return code is ever checked anywhere.
342 */
343 return 0;
344}
345
346static int target_alloc(struct scsi_target *starget)
347{
348 struct us_data *us = host_to_us(dev_to_shost(starget->dev.parent));
349
350 /*
351 * Some USB drives don't support REPORT LUNS, even though they
352 * report a SCSI revision level above 2. Tell the SCSI layer
353 * not to issue that command; it will perform a normal sequential
354 * scan instead.
355 */
356 starget->no_report_luns = 1;
357
358 /*
359 * The UFI spec treats the Peripheral Qualifier bits in an
360 * INQUIRY result as reserved and requires devices to set them
361 * to 0. However the SCSI spec requires these bits to be set
362 * to 3 to indicate when a LUN is not present.
363 *
364 * Let the scanning code know if this target merely sets
365 * Peripheral Device Type to 0x1f to indicate no LUN.
366 */
367 if (us->subclass == USB_SC_UFI)
368 starget->pdt_1f_for_no_lun = 1;
369
370 return 0;
371}
372
373/* queue a command */
374/* This is always called with scsi_lock(host) held */
375static int queuecommand_lck(struct scsi_cmnd *srb,
376 void (*done)(struct scsi_cmnd *))
377{
378 struct us_data *us = host_to_us(srb->device->host);
379
380 /* check for state-transition errors */
381 if (us->srb != NULL) {
382 printk(KERN_ERR USB_STORAGE "Error in %s: us->srb = %p\n",
383 __func__, us->srb);
384 return SCSI_MLQUEUE_HOST_BUSY;
385 }
386
387 /* fail the command if we are disconnecting */
388 if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) {
389 usb_stor_dbg(us, "Fail command during disconnect\n");
390 srb->result = DID_NO_CONNECT << 16;
391 done(srb);
392 return 0;
393 }
394
395 /* enqueue the command and wake up the control thread */
396 srb->scsi_done = done;
397 us->srb = srb;
398 complete(&us->cmnd_ready);
399
400 return 0;
401}
402
403static DEF_SCSI_QCMD(queuecommand)
404
405/***********************************************************************
406 * Error handling functions
407 ***********************************************************************/
408
409/* Command timeout and abort */
410static int command_abort(struct scsi_cmnd *srb)
411{
412 struct us_data *us = host_to_us(srb->device->host);
413
414 usb_stor_dbg(us, "%s called\n", __func__);
415
416 /*
417 * us->srb together with the TIMED_OUT, RESETTING, and ABORTING
418 * bits are protected by the host lock.
419 */
420 scsi_lock(us_to_host(us));
421
422 /* Is this command still active? */
423 if (us->srb != srb) {
424 scsi_unlock(us_to_host(us));
425 usb_stor_dbg(us, "-- nothing to abort\n");
426 return FAILED;
427 }
428
429 /*
430 * Set the TIMED_OUT bit. Also set the ABORTING bit, but only if
431 * a device reset isn't already in progress (to avoid interfering
432 * with the reset). Note that we must retain the host lock while
433 * calling usb_stor_stop_transport(); otherwise it might interfere
434 * with an auto-reset that begins as soon as we release the lock.
435 */
436 set_bit(US_FLIDX_TIMED_OUT, &us->dflags);
437 if (!test_bit(US_FLIDX_RESETTING, &us->dflags)) {
438 set_bit(US_FLIDX_ABORTING, &us->dflags);
439 usb_stor_stop_transport(us);
440 }
441 scsi_unlock(us_to_host(us));
442
443 /* Wait for the aborted command to finish */
444 wait_for_completion(&us->notify);
445 return SUCCESS;
446}
447
448/*
449 * This invokes the transport reset mechanism to reset the state of the
450 * device
451 */
452static int device_reset(struct scsi_cmnd *srb)
453{
454 struct us_data *us = host_to_us(srb->device->host);
455 int result;
456
457 usb_stor_dbg(us, "%s called\n", __func__);
458
459 /* lock the device pointers and do the reset */
460 mutex_lock(&(us->dev_mutex));
461 result = us->transport_reset(us);
462 mutex_unlock(&us->dev_mutex);
463
464 return result < 0 ? FAILED : SUCCESS;
465}
466
467/* Simulate a SCSI bus reset by resetting the device's USB port. */
468static int bus_reset(struct scsi_cmnd *srb)
469{
470 struct us_data *us = host_to_us(srb->device->host);
471 int result;
472
473 usb_stor_dbg(us, "%s called\n", __func__);
474
475 result = usb_stor_port_reset(us);
476 return result < 0 ? FAILED : SUCCESS;
477}
478
479/*
480 * Report a driver-initiated device reset to the SCSI layer.
481 * Calling this for a SCSI-initiated reset is unnecessary but harmless.
482 * The caller must own the SCSI host lock.
483 */
484void usb_stor_report_device_reset(struct us_data *us)
485{
486 int i;
487 struct Scsi_Host *host = us_to_host(us);
488
489 scsi_report_device_reset(host, 0, 0);
490 if (us->fflags & US_FL_SCM_MULT_TARG) {
491 for (i = 1; i < host->max_id; ++i)
492 scsi_report_device_reset(host, 0, i);
493 }
494}
495
496/*
497 * Report a driver-initiated bus reset to the SCSI layer.
498 * Calling this for a SCSI-initiated reset is unnecessary but harmless.
499 * The caller must not own the SCSI host lock.
500 */
501void usb_stor_report_bus_reset(struct us_data *us)
502{
503 struct Scsi_Host *host = us_to_host(us);
504
505 scsi_lock(host);
506 scsi_report_bus_reset(host, 0);
507 scsi_unlock(host);
508}
509
510/***********************************************************************
511 * /proc/scsi/ functions
512 ***********************************************************************/
513
514static int write_info(struct Scsi_Host *host, char *buffer, int length)
515{
516 /* if someone is sending us data, just throw it away */
517 return length;
518}
519
520static int show_info (struct seq_file *m, struct Scsi_Host *host)
521{
522 struct us_data *us = host_to_us(host);
523 const char *string;
524
525 /* print the controller name */
526 seq_printf(m, " Host scsi%d: usb-storage\n", host->host_no);
527
528 /* print product, vendor, and serial number strings */
529 if (us->pusb_dev->manufacturer)
530 string = us->pusb_dev->manufacturer;
531 else if (us->unusual_dev->vendorName)
532 string = us->unusual_dev->vendorName;
533 else
534 string = "Unknown";
535 seq_printf(m, " Vendor: %s\n", string);
536 if (us->pusb_dev->product)
537 string = us->pusb_dev->product;
538 else if (us->unusual_dev->productName)
539 string = us->unusual_dev->productName;
540 else
541 string = "Unknown";
542 seq_printf(m, " Product: %s\n", string);
543 if (us->pusb_dev->serial)
544 string = us->pusb_dev->serial;
545 else
546 string = "None";
547 seq_printf(m, "Serial Number: %s\n", string);
548
549 /* show the protocol and transport */
550 seq_printf(m, " Protocol: %s\n", us->protocol_name);
551 seq_printf(m, " Transport: %s\n", us->transport_name);
552
553 /* show the device flags */
554 seq_printf(m, " Quirks:");
555
556#define US_FLAG(name, value) \
557 if (us->fflags & value) seq_printf(m, " " #name);
558US_DO_ALL_FLAGS
559#undef US_FLAG
560 seq_putc(m, '\n');
561 return 0;
562}
563
564/***********************************************************************
565 * Sysfs interface
566 ***********************************************************************/
567
568/* Output routine for the sysfs max_sectors file */
569static ssize_t max_sectors_show(struct device *dev, struct device_attribute *attr, char *buf)
570{
571 struct scsi_device *sdev = to_scsi_device(dev);
572
573 return sprintf(buf, "%u\n", queue_max_hw_sectors(sdev->request_queue));
574}
575
576/* Input routine for the sysfs max_sectors file */
577static ssize_t max_sectors_store(struct device *dev, struct device_attribute *attr, const char *buf,
578 size_t count)
579{
580 struct scsi_device *sdev = to_scsi_device(dev);
581 unsigned short ms;
582
583 if (sscanf(buf, "%hu", &ms) > 0) {
584 blk_queue_max_hw_sectors(sdev->request_queue, ms);
585 return count;
586 }
587 return -EINVAL;
588}
589static DEVICE_ATTR_RW(max_sectors);
590
591static struct device_attribute *sysfs_device_attr_list[] = {
592 &dev_attr_max_sectors,
593 NULL,
594};
595
596/*
597 * this defines our host template, with which we'll allocate hosts
598 */
599
600static const struct scsi_host_template usb_stor_host_template = {
601 /* basic userland interface stuff */
602 .name = "usb-storage",
603 .proc_name = "usb-storage",
604 .show_info = show_info,
605 .write_info = write_info,
606 .info = host_info,
607
608 /* command interface -- queued only */
609 .queuecommand = queuecommand,
610
611 /* error and abort handlers */
612 .eh_abort_handler = command_abort,
613 .eh_device_reset_handler = device_reset,
614 .eh_bus_reset_handler = bus_reset,
615
616 /* queue commands only, only one command per LUN */
617 .can_queue = 1,
618
619 /* unknown initiator id */
620 .this_id = -1,
621
622 .slave_alloc = slave_alloc,
623 .slave_configure = slave_configure,
624 .target_alloc = target_alloc,
625
626 /* lots of sg segments can be handled */
627 .sg_tablesize = SG_MAX_SEGMENTS,
628
629
630 /*
631 * Limit the total size of a transfer to 120 KB.
632 *
633 * Some devices are known to choke with anything larger. It seems like
634 * the problem stems from the fact that original IDE controllers had
635 * only an 8-bit register to hold the number of sectors in one transfer
636 * and even those couldn't handle a full 256 sectors.
637 *
638 * Because we want to make sure we interoperate with as many devices as
639 * possible, we will maintain a 240 sector transfer size limit for USB
640 * Mass Storage devices.
641 *
642 * Tests show that other operating have similar limits with Microsoft
643 * Windows 7 limiting transfers to 128 sectors for both USB2 and USB3
644 * and Apple Mac OS X 10.11 limiting transfers to 256 sectors for USB2
645 * and 2048 for USB3 devices.
646 */
647 .max_sectors = 240,
648
649 /*
650 * merge commands... this seems to help performance, but
651 * periodically someone should test to see which setting is more
652 * optimal.
653 */
654 .use_clustering = 1,
655
656 /* emulated HBA */
657 .emulated = 1,
658
659 /* we do our own delay after a device or bus reset */
660 .skip_settle_delay = 1,
661
662 /* sysfs device attributes */
663 .sdev_attrs = sysfs_device_attr_list,
664
665 /* module management */
666 .module = THIS_MODULE
667};
668
669void usb_stor_host_template_init(struct scsi_host_template *sht,
670 const char *name, struct module *owner)
671{
672 *sht = usb_stor_host_template;
673 sht->name = name;
674 sht->proc_name = name;
675 sht->module = owner;
676}
677EXPORT_SYMBOL_GPL(usb_stor_host_template_init);
678
679/* To Report "Illegal Request: Invalid Field in CDB */
680unsigned char usb_stor_sense_invalidCDB[18] = {
681 [0] = 0x70, /* current error */
682 [2] = ILLEGAL_REQUEST, /* Illegal Request = 0x05 */
683 [7] = 0x0a, /* additional length */
684 [12] = 0x24 /* Invalid Field in CDB */
685};
686EXPORT_SYMBOL_GPL(usb_stor_sense_invalidCDB);