Loading...
1#
2# USB Serial device configuration
3#
4
5menuconfig USB_SERIAL
6 tristate "USB Serial Converter support"
7 depends on USB
8 ---help---
9 Say Y here if you have a USB device that provides normal serial
10 ports, or acts like a serial device, and you want to connect it to
11 your USB bus.
12
13 Please read <file:Documentation/usb/usb-serial.txt> for more
14 information on the specifics of the different devices that are
15 supported, and on how to use them.
16
17 To compile this driver as a module, choose M here: the
18 module will be called usbserial.
19
20if USB_SERIAL
21
22config USB_SERIAL_CONSOLE
23 bool "USB Serial Console device support"
24 depends on USB_SERIAL=y
25 ---help---
26 If you say Y here, it will be possible to use a USB to serial
27 converter port as the system console (the system console is the
28 device which receives all kernel messages and warnings and which
29 allows logins in single user mode). This could be useful if some
30 terminal or printer is connected to that serial port.
31
32 Even if you say Y here, the currently visible virtual console
33 (/dev/tty0) will still be used as the system console by default, but
34 you can alter that using a kernel command line option such as
35 "console=ttyUSB0". (Try "man bootparam" or see the documentation of
36 your boot loader (lilo or loadlin) about how to pass options to the
37 kernel at boot time.)
38
39 If you don't have a VGA card installed and you say Y here, the
40 kernel will automatically use the first USB to serial converter
41 port, /dev/ttyUSB0, as system console.
42
43 If unsure, say N.
44
45config USB_EZUSB
46 bool "Functions for loading firmware on EZUSB chips"
47 help
48 Say Y here if you need EZUSB device support.
49
50config USB_SERIAL_GENERIC
51 bool "USB Generic Serial Driver"
52 help
53 Say Y here if you want to use the generic USB serial driver. Please
54 read <file:Documentation/usb/usb-serial.txt> for more information on
55 using this driver. It is recommended that the "USB Serial converter
56 support" be compiled as a module for this driver to be used
57 properly.
58
59config USB_SERIAL_AIRCABLE
60 tristate "USB AIRcable Bluetooth Dongle Driver"
61 help
62 Say Y here if you want to use USB AIRcable Bluetooth Dongle.
63
64 To compile this driver as a module, choose M here: the module
65 will be called aircable.
66
67config USB_SERIAL_ARK3116
68 tristate "USB ARK Micro 3116 USB Serial Driver"
69 help
70 Say Y here if you want to use a ARK Micro 3116 USB to Serial
71 device.
72
73 To compile this driver as a module, choose M here: the
74 module will be called ark3116
75
76config USB_SERIAL_BELKIN
77 tristate "USB Belkin and Peracom Single Port Serial Driver"
78 help
79 Say Y here if you want to use a Belkin USB Serial single port
80 adaptor (F5U103 is one of the model numbers) or the Peracom single
81 port USB to serial adapter.
82
83 To compile this driver as a module, choose M here: the
84 module will be called belkin_sa.
85
86config USB_SERIAL_CH341
87 tristate "USB Winchiphead CH341 Single Port Serial Driver"
88 help
89 Say Y here if you want to use a Winchiphead CH341 single port
90 USB to serial adapter.
91
92 To compile this driver as a module, choose M here: the
93 module will be called ch341.
94
95config USB_SERIAL_WHITEHEAT
96 tristate "USB ConnectTech WhiteHEAT Serial Driver"
97 select USB_EZUSB
98 help
99 Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
100 USB to serial converter device.
101
102 To compile this driver as a module, choose M here: the
103 module will be called whiteheat.
104
105config USB_SERIAL_DIGI_ACCELEPORT
106 tristate "USB Digi International AccelePort USB Serial Driver"
107 ---help---
108 Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
109 2 port (plus parallel port) and 4 port USB serial converters. The
110 parallel port on the USB 2 appears as a third serial port on Linux.
111 The Digi Acceleport USB 8 is not yet supported by this driver.
112
113 This driver works under SMP with the usb-uhci driver. It does not
114 work under SMP with the uhci driver.
115
116 To compile this driver as a module, choose M here: the
117 module will be called digi_acceleport.
118
119config USB_SERIAL_CP210X
120 tristate "USB CP210x family of UART Bridge Controllers"
121 help
122 Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
123 to RS232 converters.
124
125 To compile this driver as a module, choose M here: the
126 module will be called cp210x.
127
128config USB_SERIAL_CYPRESS_M8
129 tristate "USB Cypress M8 USB Serial Driver"
130 help
131 Say Y here if you want to use a device that contains the Cypress
132 USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
133
134 Attempted SMP support... send bug reports!
135
136 Supported microcontrollers in the CY4601 family are:
137 CY7C63741 CY7C63742 CY7C63743 CY7C64013
138
139 To compile this driver as a module, choose M here: the
140 module will be called cypress_m8.
141
142config USB_SERIAL_EMPEG
143 tristate "USB Empeg empeg-car Mark I/II Driver"
144 help
145 Say Y here if you want to connect to your Empeg empeg-car Mark I/II
146 mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...}
147 device node. See <file:Documentation/usb/usb-serial.txt> for more
148 tidbits of information.
149
150 To compile this driver as a module, choose M here: the
151 module will be called empeg.
152
153config USB_SERIAL_FTDI_SIO
154 tristate "USB FTDI Single Port Serial Driver"
155 ---help---
156 Say Y here if you want to use a FTDI SIO single port USB to serial
157 converter device. The implementation I have is called the USC-1000.
158 This driver has also be tested with the 245 and 232 devices.
159
160 See <http://ftdi-usb-sio.sourceforge.net/> for more
161 information on this driver and the device.
162
163 To compile this driver as a module, choose M here: the
164 module will be called ftdi_sio.
165
166config USB_SERIAL_FUNSOFT
167 tristate "USB Fundamental Software Dongle Driver"
168 ---help---
169 Say Y here if you want to use the Fundamental Software dongle.
170
171 To compile this driver as a module, choose M here: the
172 module will be called funsoft.
173
174config USB_SERIAL_VISOR
175 tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
176 help
177 Say Y here if you want to connect to your HandSpring Visor, Palm
178 m500 or m505 through its USB docking station. See
179 <http://usbvisor.sourceforge.net/index.php3> for more information on using this
180 driver.
181
182 To compile this driver as a module, choose M here: the
183 module will be called visor.
184
185config USB_SERIAL_IPAQ
186 tristate "USB PocketPC PDA Driver"
187 help
188 Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
189 or any other PDA running Windows CE 3.0 or PocketPC 2002
190 using a USB cradle/cable. For information on using the driver,
191 read <file:Documentation/usb/usb-serial.txt>.
192
193 To compile this driver as a module, choose M here: the
194 module will be called ipaq.
195
196config USB_SERIAL_IR
197 tristate "USB IR Dongle Serial Driver"
198 help
199 Say Y here if you want to enable simple serial support for USB IrDA
200 devices. This is useful if you do not want to use the full IrDA
201 stack.
202
203 To compile this driver as a module, choose M here: the
204 module will be called ir-usb.
205
206config USB_SERIAL_EDGEPORT
207 tristate "USB Inside Out Edgeport Serial Driver"
208 ---help---
209 Say Y here if you want to use any of the following devices from
210 Inside Out Networks (Digi):
211 Edgeport/4
212 Rapidport/4
213 Edgeport/4t
214 Edgeport/2
215 Edgeport/4i
216 Edgeport/2i
217 Edgeport/421
218 Edgeport/21
219 Edgeport/8
220 Edgeport/8 Dual
221 Edgeport/2D8
222 Edgeport/4D8
223 Edgeport/8i
224 Edgeport/2 DIN
225 Edgeport/4 DIN
226 Edgeport/16 Dual
227
228 To compile this driver as a module, choose M here: the
229 module will be called io_edgeport.
230
231config USB_SERIAL_EDGEPORT_TI
232 tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
233 help
234 Say Y here if you want to use any of the devices from Inside Out
235 Networks (Digi) that are not supported by the io_edgeport driver.
236 This includes the Edgeport/1 device.
237
238 To compile this driver as a module, choose M here: the
239 module will be called io_ti.
240
241config USB_SERIAL_GARMIN
242 tristate "USB Garmin GPS driver"
243 help
244 Say Y here if you want to connect to your Garmin GPS.
245 Should work with most Garmin GPS devices which have a native USB port.
246
247 See <http://sourceforge.net/projects/garmin-gps> for the latest
248 version of the driver.
249
250 To compile this driver as a module, choose M here: the
251 module will be called garmin_gps.
252
253config USB_SERIAL_IPW
254 tristate "USB IPWireless (3G UMTS TDD) Driver"
255 help
256 Say Y here if you want to use a IPWireless USB modem such as
257 the ones supplied by Axity3G/Sentech South Africa.
258
259 To compile this driver as a module, choose M here: the
260 module will be called ipw.
261
262config USB_SERIAL_IUU
263 tristate "USB Infinity USB Unlimited Phoenix Driver"
264 help
265 Say Y here if you want to use a IUU in phoenix mode and get
266 an extra ttyUSBx device. More information available on
267 http://eczema.ecze.com/iuu_phoenix.html
268
269 To compile this driver as a module, choose M here: the
270 module will be called iuu_phoenix.o
271
272config USB_SERIAL_KEYSPAN_PDA
273 tristate "USB Keyspan PDA Single Port Serial Driver"
274 select USB_EZUSB
275 help
276 Say Y here if you want to use a Keyspan PDA single port USB to
277 serial converter device. This driver makes use of firmware
278 developed from scratch by Brian Warner.
279
280 To compile this driver as a module, choose M here: the
281 module will be called keyspan_pda.
282
283config USB_SERIAL_KEYSPAN
284 tristate "USB Keyspan USA-xxx Serial Driver"
285 select USB_EZUSB
286 ---help---
287 Say Y here if you want to use Keyspan USB to serial converter
288 devices. This driver makes use of Keyspan's official firmware
289 and was developed with their support. You must also include
290 firmware to support your particular device(s).
291
292 See <http://blemings.org/hugh/keyspan.html> for more information.
293
294 To compile this driver as a module, choose M here: the
295 module will be called keyspan.
296
297config USB_SERIAL_KEYSPAN_MPR
298 bool "USB Keyspan MPR Firmware"
299 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
300 help
301 Say Y here to include firmware for the Keyspan MPR converter.
302
303config USB_SERIAL_KEYSPAN_USA28
304 bool "USB Keyspan USA-28 Firmware"
305 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
306 help
307 Say Y here to include firmware for the USA-28 converter.
308
309config USB_SERIAL_KEYSPAN_USA28X
310 bool "USB Keyspan USA-28X Firmware"
311 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
312 help
313 Say Y here to include firmware for the USA-28X converter.
314 Be sure you have a USA-28X, there are also 28XA and 28XB
315 models, the label underneath has the actual part number.
316
317config USB_SERIAL_KEYSPAN_USA28XA
318 bool "USB Keyspan USA-28XA Firmware"
319 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
320 help
321 Say Y here to include firmware for the USA-28XA converter.
322 Be sure you have a USA-28XA, there are also 28X and 28XB
323 models, the label underneath has the actual part number.
324
325config USB_SERIAL_KEYSPAN_USA28XB
326 bool "USB Keyspan USA-28XB Firmware"
327 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
328 help
329 Say Y here to include firmware for the USA-28XB converter.
330 Be sure you have a USA-28XB, there are also 28X and 28XA
331 models, the label underneath has the actual part number.
332
333config USB_SERIAL_KEYSPAN_USA19
334 bool "USB Keyspan USA-19 Firmware"
335 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
336 help
337 Say Y here to include firmware for the USA-19 converter.
338
339config USB_SERIAL_KEYSPAN_USA18X
340 bool "USB Keyspan USA-18X Firmware"
341 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
342 help
343 Say Y here to include firmware for the USA-18X converter.
344
345config USB_SERIAL_KEYSPAN_USA19W
346 bool "USB Keyspan USA-19W Firmware"
347 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
348 help
349 Say Y here to include firmware for the USA-19W converter.
350
351config USB_SERIAL_KEYSPAN_USA19QW
352 bool "USB Keyspan USA-19QW Firmware"
353 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
354 help
355 Say Y here to include firmware for the USA-19QW converter.
356
357config USB_SERIAL_KEYSPAN_USA19QI
358 bool "USB Keyspan USA-19QI Firmware"
359 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
360 help
361 Say Y here to include firmware for the USA-19QI converter.
362
363config USB_SERIAL_KEYSPAN_USA49W
364 bool "USB Keyspan USA-49W Firmware"
365 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
366 help
367 Say Y here to include firmware for the USA-49W converter.
368
369config USB_SERIAL_KEYSPAN_USA49WLC
370 bool "USB Keyspan USA-49WLC Firmware"
371 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
372 help
373 Say Y here to include firmware for the USA-49WLC converter.
374
375config USB_SERIAL_KLSI
376 tristate "USB KL5KUSB105 (Palmconnect) Driver"
377 ---help---
378 Say Y here if you want to use a KL5KUSB105 - based single port
379 serial adapter. The most widely known -- and currently the only
380 tested -- device in this category is the PalmConnect USB Serial
381 adapter sold by Palm Inc. for use with their Palm III and Palm V
382 series PDAs.
383
384 Please read <file:Documentation/usb/usb-serial.txt> for more
385 information.
386
387 To compile this driver as a module, choose M here: the
388 module will be called kl5kusb105.
389
390config USB_SERIAL_KOBIL_SCT
391 tristate "USB KOBIL chipcard reader"
392 ---help---
393 Say Y here if you want to use one of the following KOBIL USB chipcard
394 readers:
395
396 - USB TWIN
397 - KAAN Standard Plus
398 - KAAN SIM
399 - SecOVID Reader Plus
400 - B1 Professional
401 - KAAN Professional
402
403 Note that you need a current CT-API.
404 To compile this driver as a module, choose M here: the
405 module will be called kobil_sct.
406
407config USB_SERIAL_MCT_U232
408 tristate "USB MCT Single Port Serial Driver"
409 ---help---
410 Say Y here if you want to use a USB Serial single port adapter from
411 Magic Control Technology Corp. (U232 is one of the model numbers).
412
413 This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
414 BAY, Belkin F5U109, and Belkin F5U409 devices.
415
416 To compile this driver as a module, choose M here: the
417 module will be called mct_u232.
418
419config USB_SERIAL_MOS7720
420 tristate "USB Moschip 7720 Serial Driver"
421 ---help---
422 Say Y here if you want to use USB Serial single and double
423 port adapters from Moschip Semiconductor Tech.
424
425 To compile this driver as a module, choose M here: the
426 module will be called mos7720.
427
428config USB_SERIAL_MOS7715_PARPORT
429 bool "Support for parallel port on the Moschip 7715"
430 depends on USB_SERIAL_MOS7720
431 depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
432 select PARPORT_NOT_PC
433 ---help---
434 Say Y if you have a Moschip 7715 device and would like to use
435 the parallel port it provides. The port will register with
436 the parport subsystem as a low-level driver.
437
438config USB_SERIAL_MOS7840
439 tristate "USB Moschip 7840/7820 USB Serial Driver"
440 ---help---
441 Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
442 Dual-Serial port device from MosChip Semiconductor.
443
444 The MCS7840 and MCS7820 have been developed to connect a wide range
445 of standard serial devices to a USB host. The MCS7840 has a USB
446 device controller connected to four (4) individual UARTs while the
447 MCS7820 controller connects to two (2) individual UARTs.
448
449 To compile this driver as a module, choose M here: the
450 module will be called mos7840. If unsure, choose N.
451
452config USB_SERIAL_MOTOROLA
453 tristate "USB Motorola Phone modem driver"
454 ---help---
455 Say Y here if you want to use a Motorola phone with a USB
456 connector as a modem link.
457
458 To compile this driver as a module, choose M here: the
459 module will be called moto_modem. If unsure, choose N.
460
461config USB_SERIAL_NAVMAN
462 tristate "USB Navman GPS device"
463 help
464 To compile this driver as a module, choose M here: the
465 module will be called navman.
466
467config USB_SERIAL_PL2303
468 tristate "USB Prolific 2303 Single Port Serial Driver"
469 help
470 Say Y here if you want to use the PL2303 USB Serial single port
471 adapter from Prolific.
472
473 To compile this driver as a module, choose M here: the
474 module will be called pl2303.
475
476config USB_SERIAL_OTI6858
477 tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
478 help
479 Say Y here if you want to use the OTi-6858 single port USB to serial
480 converter device.
481
482 To compile this driver as a module, choose M here: the
483 module will be called oti6858.
484
485config USB_SERIAL_QCAUX
486 tristate "USB Qualcomm Auxiliary Serial Port Driver"
487 help
488 Say Y here if you want to use the auxiliary serial ports provided
489 by many modems based on Qualcomm chipsets. These ports often use
490 a proprietary protocol called DM and cannot be used for AT- or
491 PPP-based communication.
492
493 To compile this driver as a module, choose M here: the
494 module will be called qcaux. If unsure, choose N.
495
496config USB_SERIAL_QUALCOMM
497 tristate "USB Qualcomm Serial modem"
498 select USB_SERIAL_WWAN
499 help
500 Say Y here if you have a Qualcomm USB modem device. These are
501 usually wireless cellular modems.
502
503 To compile this driver as a module, choose M here: the
504 module will be called qcserial.
505
506config USB_SERIAL_SPCP8X5
507 tristate "USB SPCP8x5 USB To Serial Driver"
508 help
509 Say Y here if you want to use the spcp8x5 converter chip. This is
510 commonly found in some Z-Wave USB devices.
511
512 To compile this driver as a module, choose M here: the
513 module will be called spcp8x5.
514
515config USB_SERIAL_HP4X
516 tristate "USB HP4x Calculators support"
517 help
518 Say Y here if you want to use an Hewlett-Packard 4x Calculator.
519
520 To compile this driver as a module, choose M here: the
521 module will be called hp4x.
522
523config USB_SERIAL_SAFE
524 tristate "USB Safe Serial (Encapsulated) Driver"
525
526config USB_SERIAL_SAFE_PADDED
527 bool "USB Secure Encapsulated Driver - Padded"
528 depends on USB_SERIAL_SAFE
529
530config USB_SERIAL_SIEMENS_MPI
531 tristate "USB Siemens MPI driver"
532 help
533 Say M here if you want to use a Siemens USB/MPI adapter.
534
535 To compile this driver as a module, choose M here: the
536 module will be called siemens_mpi.
537
538config USB_SERIAL_SIERRAWIRELESS
539 tristate "USB Sierra Wireless Driver"
540 help
541 Say M here if you want to use Sierra Wireless devices.
542
543 Many devices have a feature known as TRU-Install. For those devices
544 to work properly, the USB Storage Sierra feature must be enabled.
545
546 To compile this driver as a module, choose M here: the
547 module will be called sierra.
548
549config USB_SERIAL_SYMBOL
550 tristate "USB Symbol Barcode driver (serial mode)"
551 help
552 Say Y here if you want to use a Symbol USB Barcode device
553 in serial emulation mode.
554
555 To compile this driver as a module, choose M here: the
556 module will be called symbolserial.
557
558config USB_SERIAL_TI
559 tristate "USB TI 3410/5052 Serial Driver"
560 help
561 Say Y here if you want to use the TI USB 3410 or 5052
562 serial devices.
563
564 To compile this driver as a module, choose M here: the
565 module will be called ti_usb_3410_5052.
566
567config USB_SERIAL_CYBERJACK
568 tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
569 ---help---
570 Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
571 reader. This is an interface to ISO 7816 compatible contact-based
572 chipcards, e.g. GSM SIMs.
573
574 To compile this driver as a module, choose M here: the
575 module will be called cyberjack.
576
577 If unsure, say N.
578
579config USB_SERIAL_XIRCOM
580 tristate "USB Xircom / Entregra Single Port Serial Driver"
581 select USB_EZUSB
582 help
583 Say Y here if you want to use a Xircom or Entregra single port USB to
584 serial converter device. This driver makes use of firmware
585 developed from scratch by Brian Warner.
586
587 To compile this driver as a module, choose M here: the
588 module will be called keyspan_pda.
589
590config USB_SERIAL_WWAN
591 tristate
592
593config USB_SERIAL_OPTION
594 tristate "USB driver for GSM and CDMA modems"
595 select USB_SERIAL_WWAN
596 help
597 Say Y here if you have a GSM or CDMA modem that's connected to USB.
598
599 This driver also supports several PCMCIA cards which have a
600 built-in OHCI-USB adapter and an internally-connected GSM modem.
601 The USB bus on these cards is not accessible externally.
602
603 Supported devices include (some of?) those made by:
604 Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
605
606 To compile this driver as a module, choose M here: the
607 module will be called option.
608
609 If this driver doesn't recognize your device,
610 it might be accessible via the FTDI_SIO driver.
611
612config USB_SERIAL_OMNINET
613 tristate "USB ZyXEL omni.net LCD Plus Driver"
614 help
615 Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
616
617 To compile this driver as a module, choose M here: the
618 module will be called omninet.
619
620config USB_SERIAL_OPTICON
621 tristate "USB Opticon Barcode driver (serial mode)"
622 help
623 Say Y here if you want to use a Opticon USB Barcode device
624 in serial emulation mode.
625
626 To compile this driver as a module, choose M here: the
627 module will be called opticon.
628
629config USB_SERIAL_VIVOPAY_SERIAL
630 tristate "USB ViVOpay serial interface driver"
631 help
632 Say Y here if you want to use a ViVOtech ViVOpay USB device.
633
634 To compile this driver as a module, choose M here: the
635 module will be called vivopay-serial.
636
637config USB_SERIAL_ZIO
638 tristate "ZIO Motherboard USB serial interface driver"
639 help
640 Say Y here if you want to use ZIO Motherboard.
641
642 To compile this driver as a module, choose M here: the
643 module will be called zio.
644
645config USB_SERIAL_SSU100
646 tristate "USB Quatech SSU-100 Single Port Serial Driver"
647 help
648 Say Y here if you want to use the Quatech SSU-100 single
649 port usb to serial adapter.
650
651 To compile this driver as a module, choose M here: the
652 module will be called ssu100.
653
654config USB_SERIAL_DEBUG
655 tristate "USB Debugging Device"
656 help
657 Say Y here if you have a USB debugging device used to receive
658 debugging data from another machine. The most common of these
659 devices is the NetChip TurboCONNECT device.
660
661 To compile this driver as a module, choose M here: the
662 module will be called usb-debug.
663
664endif # USB_SERIAL
1#
2# USB Serial device configuration
3#
4
5menuconfig USB_SERIAL
6 tristate "USB Serial Converter support"
7 depends on TTY
8 ---help---
9 Say Y here if you have a USB device that provides normal serial
10 ports, or acts like a serial device, and you want to connect it to
11 your USB bus.
12
13 Please read <file:Documentation/usb/usb-serial.txt> for more
14 information on the specifics of the different devices that are
15 supported, and on how to use them.
16
17 To compile this driver as a module, choose M here: the
18 module will be called usbserial.
19
20if USB_SERIAL
21
22config USB_SERIAL_CONSOLE
23 bool "USB Serial Console device support"
24 depends on USB_SERIAL=y
25 ---help---
26 If you say Y here, it will be possible to use a USB to serial
27 converter port as the system console (the system console is the
28 device which receives all kernel messages and warnings and which
29 allows logins in single user mode). This could be useful if some
30 terminal or printer is connected to that serial port.
31
32 Even if you say Y here, the currently visible virtual console
33 (/dev/tty0) will still be used as the system console by default, but
34 you can alter that using a kernel command line option such as
35 "console=ttyUSB0". (Try "man bootparam" or see the documentation of
36 your boot loader (lilo or loadlin) about how to pass options to the
37 kernel at boot time.)
38
39 If you don't have a VGA card installed and you say Y here, the
40 kernel will automatically use the first USB to serial converter
41 port, /dev/ttyUSB0, as system console.
42
43 If unsure, say N.
44
45config USB_SERIAL_GENERIC
46 bool "USB Generic Serial Driver"
47 help
48 Say Y here if you want to use the generic USB serial driver. Please
49 read <file:Documentation/usb/usb-serial.txt> for more information on
50 using this driver. It is recommended that the "USB Serial converter
51 support" be compiled as a module for this driver to be used
52 properly.
53
54config USB_SERIAL_SIMPLE
55 tristate "USB Serial Simple Driver"
56 help
57 Say Y here to use the USB serial "simple" driver. This driver
58 handles a wide range of very simple devices, all in one
59 driver. Specifically, it supports:
60 - Suunto ANT+ USB device.
61 - Medtronic CareLink USB device
62 - Fundamental Software dongle.
63 - Google USB serial devices
64 - HP4x calculators
65 - a number of Motorola phones
66 - Novatel Wireless GPS receivers
67 - Siemens USB/MPI adapter.
68 - ViVOtech ViVOpay USB device.
69 - Infineon Modem Flashloader USB interface
70 - ZIO Motherboard USB serial interface
71
72 To compile this driver as a module, choose M here: the module
73 will be called usb-serial-simple.
74
75config USB_SERIAL_AIRCABLE
76 tristate "USB AIRcable Bluetooth Dongle Driver"
77 help
78 Say Y here if you want to use USB AIRcable Bluetooth Dongle.
79
80 To compile this driver as a module, choose M here: the module
81 will be called aircable.
82
83config USB_SERIAL_ARK3116
84 tristate "USB ARK Micro 3116 USB Serial Driver"
85 help
86 Say Y here if you want to use a ARK Micro 3116 USB to Serial
87 device.
88
89 To compile this driver as a module, choose M here: the
90 module will be called ark3116
91
92config USB_SERIAL_BELKIN
93 tristate "USB Belkin and Peracom Single Port Serial Driver"
94 help
95 Say Y here if you want to use a Belkin USB Serial single port
96 adaptor (F5U103 is one of the model numbers) or the Peracom single
97 port USB to serial adapter.
98
99 To compile this driver as a module, choose M here: the
100 module will be called belkin_sa.
101
102config USB_SERIAL_CH341
103 tristate "USB Winchiphead CH341 Single Port Serial Driver"
104 help
105 Say Y here if you want to use a Winchiphead CH341 single port
106 USB to serial adapter.
107
108 To compile this driver as a module, choose M here: the
109 module will be called ch341.
110
111config USB_SERIAL_WHITEHEAT
112 tristate "USB ConnectTech WhiteHEAT Serial Driver"
113 select USB_EZUSB_FX2
114 help
115 Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
116 USB to serial converter device.
117
118 To compile this driver as a module, choose M here: the
119 module will be called whiteheat.
120
121config USB_SERIAL_DIGI_ACCELEPORT
122 tristate "USB Digi International AccelePort USB Serial Driver"
123 ---help---
124 Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
125 2 port (plus parallel port) and 4 port USB serial converters. The
126 parallel port on the USB 2 appears as a third serial port on Linux.
127 The Digi Acceleport USB 8 is not yet supported by this driver.
128
129 This driver works under SMP with the usb-uhci driver. It does not
130 work under SMP with the uhci driver.
131
132 To compile this driver as a module, choose M here: the
133 module will be called digi_acceleport.
134
135config USB_SERIAL_CP210X
136 tristate "USB CP210x family of UART Bridge Controllers"
137 help
138 Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
139 to RS232 converters.
140
141 To compile this driver as a module, choose M here: the
142 module will be called cp210x.
143
144config USB_SERIAL_CYPRESS_M8
145 tristate "USB Cypress M8 USB Serial Driver"
146 help
147 Say Y here if you want to use a device that contains the Cypress
148 USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
149
150 Attempted SMP support... send bug reports!
151
152 Supported microcontrollers in the CY4601 family are:
153 CY7C63741 CY7C63742 CY7C63743 CY7C64013
154
155 To compile this driver as a module, choose M here: the
156 module will be called cypress_m8.
157
158config USB_SERIAL_EMPEG
159 tristate "USB Empeg empeg-car Mark I/II Driver"
160 help
161 Say Y here if you want to connect to your Empeg empeg-car Mark I/II
162 mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...}
163 device node. See <file:Documentation/usb/usb-serial.txt> for more
164 tidbits of information.
165
166 To compile this driver as a module, choose M here: the
167 module will be called empeg.
168
169config USB_SERIAL_FTDI_SIO
170 tristate "USB FTDI Single Port Serial Driver"
171 ---help---
172 Say Y here if you want to use a FTDI SIO single port USB to serial
173 converter device. The implementation I have is called the USC-1000.
174 This driver has also been tested with the 245 and 232 devices.
175
176 See <http://ftdi-usb-sio.sourceforge.net/> for more
177 information on this driver and the device.
178
179 To compile this driver as a module, choose M here: the
180 module will be called ftdi_sio.
181
182config USB_SERIAL_VISOR
183 tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
184 help
185 Say Y here if you want to connect to your HandSpring Visor, Palm
186 m500 or m505 through its USB docking station. See
187 <http://usbvisor.sourceforge.net/index.php3> for more information on using this
188 driver.
189
190 To compile this driver as a module, choose M here: the
191 module will be called visor.
192
193config USB_SERIAL_IPAQ
194 tristate "USB PocketPC PDA Driver"
195 help
196 Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
197 or any other PDA running Windows CE 3.0 or PocketPC 2002
198 using a USB cradle/cable. For information on using the driver,
199 read <file:Documentation/usb/usb-serial.txt>.
200
201 To compile this driver as a module, choose M here: the
202 module will be called ipaq.
203
204config USB_SERIAL_IR
205 tristate "USB IR Dongle Serial Driver"
206 help
207 Say Y here if you want to enable simple serial support for USB IrDA
208 devices. This is useful if you do not want to use the full IrDA
209 stack.
210
211 To compile this driver as a module, choose M here: the
212 module will be called ir-usb.
213
214config USB_SERIAL_EDGEPORT
215 tristate "USB Inside Out Edgeport Serial Driver"
216 ---help---
217 Say Y here if you want to use any of the following devices from
218 Inside Out Networks (Digi):
219 Edgeport/4
220 Rapidport/4
221 Edgeport/4t
222 Edgeport/2
223 Edgeport/4i
224 Edgeport/2i
225 Edgeport/421
226 Edgeport/21
227 Edgeport/8
228 Edgeport/8 Dual
229 Edgeport/2D8
230 Edgeport/4D8
231 Edgeport/8i
232 Edgeport/2 DIN
233 Edgeport/4 DIN
234 Edgeport/16 Dual
235
236 To compile this driver as a module, choose M here: the
237 module will be called io_edgeport.
238
239config USB_SERIAL_EDGEPORT_TI
240 tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
241 help
242 Say Y here if you want to use any of the devices from Inside Out
243 Networks (Digi) that are not supported by the io_edgeport driver.
244 This includes the Edgeport/1 device.
245
246 To compile this driver as a module, choose M here: the
247 module will be called io_ti.
248
249config USB_SERIAL_F81232
250 tristate "USB Fintek F81232 Single Port Serial Driver"
251 help
252 Say Y here if you want to use the Fintek F81232 single
253 port usb to serial adapter.
254
255 To compile this driver as a module, choose M here: the
256 module will be called f81232.
257
258config USB_SERIAL_F8153X
259 tristate "USB Fintek F81532/534 Multi-Ports Serial Driver"
260 help
261 Say Y here if you want to use the Fintek F81532/534 Multi-Ports
262 USB to serial adapter.
263
264 To compile this driver as a module, choose M here: the
265 module will be called f81534.
266
267
268config USB_SERIAL_GARMIN
269 tristate "USB Garmin GPS driver"
270 help
271 Say Y here if you want to connect to your Garmin GPS.
272 Should work with most Garmin GPS devices which have a native USB port.
273
274 See <http://sourceforge.net/projects/garmin-gps> for the latest
275 version of the driver.
276
277 To compile this driver as a module, choose M here: the
278 module will be called garmin_gps.
279
280config USB_SERIAL_IPW
281 tristate "USB IPWireless (3G UMTS TDD) Driver"
282 select USB_SERIAL_WWAN
283 help
284 Say Y here if you want to use a IPWireless USB modem such as
285 the ones supplied by Axity3G/Sentech South Africa.
286
287 To compile this driver as a module, choose M here: the
288 module will be called ipw.
289
290config USB_SERIAL_IUU
291 tristate "USB Infinity USB Unlimited Phoenix Driver"
292 help
293 Say Y here if you want to use a IUU in phoenix mode and get
294 an extra ttyUSBx device. More information available on
295 http://eczema.ecze.com/iuu_phoenix.html
296
297 To compile this driver as a module, choose M here: the
298 module will be called iuu_phoenix.o
299
300config USB_SERIAL_KEYSPAN_PDA
301 tristate "USB Keyspan PDA Single Port Serial Driver"
302 select USB_EZUSB_FX2
303 help
304 Say Y here if you want to use a Keyspan PDA single port USB to
305 serial converter device. This driver makes use of firmware
306 developed from scratch by Brian Warner.
307
308 To compile this driver as a module, choose M here: the
309 module will be called keyspan_pda.
310
311config USB_SERIAL_KEYSPAN
312 tristate "USB Keyspan USA-xxx Serial Driver"
313 select USB_EZUSB_FX2
314 ---help---
315 Say Y here if you want to use Keyspan USB to serial converter
316 devices. This driver makes use of Keyspan's official firmware
317 and was developed with their support. You must also include
318 firmware to support your particular device(s).
319
320 See <http://blemings.org/hugh/keyspan.html> for more information.
321
322 To compile this driver as a module, choose M here: the
323 module will be called keyspan.
324
325config USB_SERIAL_KEYSPAN_MPR
326 bool "USB Keyspan MPR Firmware"
327 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
328 help
329 Say Y here to include firmware for the Keyspan MPR converter.
330
331config USB_SERIAL_KEYSPAN_USA28
332 bool "USB Keyspan USA-28 Firmware"
333 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
334 help
335 Say Y here to include firmware for the USA-28 converter.
336
337config USB_SERIAL_KEYSPAN_USA28X
338 bool "USB Keyspan USA-28X Firmware"
339 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
340 help
341 Say Y here to include firmware for the USA-28X converter.
342 Be sure you have a USA-28X, there are also 28XA and 28XB
343 models, the label underneath has the actual part number.
344
345config USB_SERIAL_KEYSPAN_USA28XA
346 bool "USB Keyspan USA-28XA Firmware"
347 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
348 help
349 Say Y here to include firmware for the USA-28XA converter.
350 Be sure you have a USA-28XA, there are also 28X and 28XB
351 models, the label underneath has the actual part number.
352
353config USB_SERIAL_KEYSPAN_USA28XB
354 bool "USB Keyspan USA-28XB Firmware"
355 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
356 help
357 Say Y here to include firmware for the USA-28XB converter.
358 Be sure you have a USA-28XB, there are also 28X and 28XA
359 models, the label underneath has the actual part number.
360
361config USB_SERIAL_KEYSPAN_USA19
362 bool "USB Keyspan USA-19 Firmware"
363 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
364 help
365 Say Y here to include firmware for the USA-19 converter.
366
367config USB_SERIAL_KEYSPAN_USA18X
368 bool "USB Keyspan USA-18X Firmware"
369 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
370 help
371 Say Y here to include firmware for the USA-18X converter.
372
373config USB_SERIAL_KEYSPAN_USA19W
374 bool "USB Keyspan USA-19W Firmware"
375 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
376 help
377 Say Y here to include firmware for the USA-19W converter.
378
379config USB_SERIAL_KEYSPAN_USA19QW
380 bool "USB Keyspan USA-19QW Firmware"
381 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
382 help
383 Say Y here to include firmware for the USA-19QW converter.
384
385config USB_SERIAL_KEYSPAN_USA19QI
386 bool "USB Keyspan USA-19QI Firmware"
387 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
388 help
389 Say Y here to include firmware for the USA-19QI converter.
390
391config USB_SERIAL_KEYSPAN_USA49W
392 bool "USB Keyspan USA-49W Firmware"
393 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
394 help
395 Say Y here to include firmware for the USA-49W converter.
396
397config USB_SERIAL_KEYSPAN_USA49WLC
398 bool "USB Keyspan USA-49WLC Firmware"
399 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
400 help
401 Say Y here to include firmware for the USA-49WLC converter.
402
403config USB_SERIAL_KLSI
404 tristate "USB KL5KUSB105 (Palmconnect) Driver"
405 ---help---
406 Say Y here if you want to use a KL5KUSB105 - based single port
407 serial adapter. The most widely known -- and currently the only
408 tested -- device in this category is the PalmConnect USB Serial
409 adapter sold by Palm Inc. for use with their Palm III and Palm V
410 series PDAs.
411
412 Please read <file:Documentation/usb/usb-serial.txt> for more
413 information.
414
415 To compile this driver as a module, choose M here: the
416 module will be called kl5kusb105.
417
418config USB_SERIAL_KOBIL_SCT
419 tristate "USB KOBIL chipcard reader"
420 ---help---
421 Say Y here if you want to use one of the following KOBIL USB chipcard
422 readers:
423
424 - USB TWIN
425 - KAAN Standard Plus
426 - KAAN SIM
427 - SecOVID Reader Plus
428 - B1 Professional
429 - KAAN Professional
430
431 Note that you need a current CT-API.
432 To compile this driver as a module, choose M here: the
433 module will be called kobil_sct.
434
435config USB_SERIAL_MCT_U232
436 tristate "USB MCT Single Port Serial Driver"
437 ---help---
438 Say Y here if you want to use a USB Serial single port adapter from
439 Magic Control Technology Corp. (U232 is one of the model numbers).
440
441 This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
442 BAY, Belkin F5U109, and Belkin F5U409 devices.
443
444 To compile this driver as a module, choose M here: the
445 module will be called mct_u232.
446
447config USB_SERIAL_METRO
448 tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver"
449 ---help---
450 Say Y here if you want to use a USB POS Metrologic barcode scanner.
451
452 To compile this driver as a module, choose M here: the
453 module will be called metro-usb.
454
455config USB_SERIAL_MOS7720
456 tristate "USB Moschip 7720 Serial Driver"
457 ---help---
458 Say Y here if you want to use USB Serial single and double
459 port adapters from Moschip Semiconductor Tech.
460
461 To compile this driver as a module, choose M here: the
462 module will be called mos7720.
463
464config USB_SERIAL_MOS7715_PARPORT
465 bool "Support for parallel port on the Moschip 7715"
466 depends on USB_SERIAL_MOS7720
467 depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
468 select PARPORT_NOT_PC
469 ---help---
470 Say Y if you have a Moschip 7715 device and would like to use
471 the parallel port it provides. The port will register with
472 the parport subsystem as a low-level driver.
473
474config USB_SERIAL_MOS7840
475 tristate "USB Moschip 7840/7820 USB Serial Driver"
476 ---help---
477 Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
478 Dual-Serial port device from MosChip Semiconductor.
479
480 The MCS7840 and MCS7820 have been developed to connect a wide range
481 of standard serial devices to a USB host. The MCS7840 has a USB
482 device controller connected to four (4) individual UARTs while the
483 MCS7820 controller connects to two (2) individual UARTs.
484
485 To compile this driver as a module, choose M here: the
486 module will be called mos7840. If unsure, choose N.
487
488config USB_SERIAL_MXUPORT
489 tristate "USB Moxa UPORT Serial Driver"
490 ---help---
491 Say Y here if you want to use a MOXA UPort Serial hub.
492
493 This driver supports:
494
495 [2 Port]
496 - UPort 1250 : 2 Port RS-232/422/485 USB to Serial Hub
497 - UPort 1250I : 2 Port RS-232/422/485 USB to Serial Hub with
498 Isolation
499
500 [4 Port]
501 - UPort 1410 : 4 Port RS-232 USB to Serial Hub
502 - UPort 1450 : 4 Port RS-232/422/485 USB to Serial Hub
503 - UPort 1450I : 4 Port RS-232/422/485 USB to Serial Hub with
504 Isolation
505
506 [8 Port]
507 - UPort 1610-8 : 8 Port RS-232 USB to Serial Hub
508 - UPort 1650-8 : 8 Port RS-232/422/485 USB to Serial Hub
509
510 [16 Port]
511 - UPort 1610-16 : 16 Port RS-232 USB to Serial Hub
512 - UPort 1650-16 : 16 Port RS-232/422/485 USB to Serial Hub
513
514 To compile this driver as a module, choose M here: the
515 module will be called mxuport.
516
517config USB_SERIAL_NAVMAN
518 tristate "USB Navman GPS device"
519 help
520 To compile this driver as a module, choose M here: the
521 module will be called navman.
522
523config USB_SERIAL_PL2303
524 tristate "USB Prolific 2303 Single Port Serial Driver"
525 help
526 Say Y here if you want to use the PL2303 USB Serial single port
527 adapter from Prolific.
528
529 To compile this driver as a module, choose M here: the
530 module will be called pl2303.
531
532config USB_SERIAL_OTI6858
533 tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
534 help
535 Say Y here if you want to use the OTi-6858 single port USB to serial
536 converter device.
537
538 To compile this driver as a module, choose M here: the
539 module will be called oti6858.
540
541config USB_SERIAL_QCAUX
542 tristate "USB Qualcomm Auxiliary Serial Port Driver"
543 help
544 Say Y here if you want to use the auxiliary serial ports provided
545 by many modems based on Qualcomm chipsets. These ports often use
546 a proprietary protocol called DM and cannot be used for AT- or
547 PPP-based communication.
548
549 To compile this driver as a module, choose M here: the
550 module will be called qcaux. If unsure, choose N.
551
552config USB_SERIAL_QUALCOMM
553 tristate "USB Qualcomm Serial modem"
554 select USB_SERIAL_WWAN
555 help
556 Say Y here if you have a Qualcomm USB modem device. These are
557 usually wireless cellular modems.
558
559 To compile this driver as a module, choose M here: the
560 module will be called qcserial.
561
562config USB_SERIAL_SPCP8X5
563 tristate "USB SPCP8x5 USB To Serial Driver"
564 help
565 Say Y here if you want to use the spcp8x5 converter chip. This is
566 commonly found in some Z-Wave USB devices.
567
568 To compile this driver as a module, choose M here: the
569 module will be called spcp8x5.
570
571config USB_SERIAL_SAFE
572 tristate "USB Safe Serial (Encapsulated) Driver"
573
574config USB_SERIAL_SAFE_PADDED
575 bool "USB Secure Encapsulated Driver - Padded"
576 depends on USB_SERIAL_SAFE
577
578config USB_SERIAL_SIERRAWIRELESS
579 tristate "USB Sierra Wireless Driver"
580 help
581 Say M here if you want to use Sierra Wireless devices.
582
583 Many devices have a feature known as TRU-Install. For those devices
584 to work properly, the USB Storage Sierra feature must be enabled.
585
586 To compile this driver as a module, choose M here: the
587 module will be called sierra.
588
589config USB_SERIAL_SYMBOL
590 tristate "USB Symbol Barcode driver (serial mode)"
591 help
592 Say Y here if you want to use a Symbol USB Barcode device
593 in serial emulation mode.
594
595 To compile this driver as a module, choose M here: the
596 module will be called symbolserial.
597
598config USB_SERIAL_TI
599 tristate "USB TI 3410/5052 Serial Driver"
600 help
601 Say Y here if you want to use the TI USB 3410 or 5052
602 serial devices.
603
604 To compile this driver as a module, choose M here: the
605 module will be called ti_usb_3410_5052.
606
607config USB_SERIAL_CYBERJACK
608 tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
609 ---help---
610 Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
611 reader. This is an interface to ISO 7816 compatible contact-based
612 chipcards, e.g. GSM SIMs.
613
614 To compile this driver as a module, choose M here: the
615 module will be called cyberjack.
616
617 If unsure, say N.
618
619config USB_SERIAL_XIRCOM
620 tristate "USB Xircom / Entrega Single Port Serial Driver"
621 select USB_EZUSB_FX2
622 help
623 Say Y here if you want to use a Xircom or Entrega single port USB to
624 serial converter device. This driver makes use of firmware
625 developed from scratch by Brian Warner.
626
627 To compile this driver as a module, choose M here: the
628 module will be called keyspan_pda.
629
630config USB_SERIAL_WWAN
631 tristate
632
633config USB_SERIAL_OPTION
634 tristate "USB driver for GSM and CDMA modems"
635 select USB_SERIAL_WWAN
636 help
637 Say Y here if you have a GSM or CDMA modem that's connected to USB.
638
639 This driver also supports several PCMCIA cards which have a
640 built-in OHCI-USB adapter and an internally-connected GSM modem.
641 The USB bus on these cards is not accessible externally.
642
643 Supported devices include (some of?) those made by:
644 Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
645
646 To compile this driver as a module, choose M here: the
647 module will be called option.
648
649 If this driver doesn't recognize your device,
650 it might be accessible via the FTDI_SIO driver.
651
652config USB_SERIAL_OMNINET
653 tristate "USB ZyXEL omni.net LCD Plus Driver"
654 help
655 Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
656
657 To compile this driver as a module, choose M here: the
658 module will be called omninet.
659
660config USB_SERIAL_OPTICON
661 tristate "USB Opticon Barcode driver (serial mode)"
662 help
663 Say Y here if you want to use a Opticon USB Barcode device
664 in serial emulation mode.
665
666 To compile this driver as a module, choose M here: the
667 module will be called opticon.
668
669config USB_SERIAL_XSENS_MT
670 tristate "Xsens motion tracker serial interface driver"
671 help
672 Say Y here if you want to use Xsens motion trackers.
673
674 This driver supports the new generation of motion trackers
675 by Xsens. Older devices can be accessed using the FTDI_SIO
676 driver.
677
678 To compile this driver as a module, choose M here: the
679 module will be called xsens_mt.
680
681config USB_SERIAL_WISHBONE
682 tristate "USB-Wishbone adapter interface driver"
683 help
684 Say Y here if you want to use a USB attached Wishbone bus.
685
686 Wishbone is an open hardware SoC bus commonly used in FPGA
687 designs. Bus access can be serialized using the Etherbone
688 protocol <http://www.ohwr.org/projects/etherbone-core>.
689
690 This driver is intended to be used with devices which attach
691 their internal Wishbone bus to a USB serial interface using
692 the Etherbone protocol. A userspace library is required to
693 speak the protocol made available by this driver as ttyUSBx.
694
695 To compile this driver as a module, choose M here: the
696 module will be called wishbone-serial.
697
698config USB_SERIAL_SSU100
699 tristate "USB Quatech SSU-100 Single Port Serial Driver"
700 help
701 Say Y here if you want to use the Quatech SSU-100 single
702 port usb to serial adapter.
703
704 To compile this driver as a module, choose M here: the
705 module will be called ssu100.
706
707config USB_SERIAL_QT2
708 tristate "USB Quatech Serial Driver for USB 2 devices"
709 help
710 Say Y here if you want to use the Quatech USB 2
711 serial adapters.
712
713 To compile this driver as a module, choose M here: the
714 module will be called quatech-serial.
715
716config USB_SERIAL_DEBUG
717 tristate "USB Debugging Device"
718 help
719 Say Y here if you have a USB debugging device used to receive
720 debugging data from another machine. The most common of these
721 devices is the NetChip TurboCONNECT device.
722
723 To compile this driver as a module, choose M here: the
724 module will be called usb-debug.
725
726endif # USB_SERIAL