Loading...
1/*
2 * (C) Copyright Linus Torvalds 1999
3 * (C) Copyright Johannes Erdfelt 1999-2001
4 * (C) Copyright Andreas Gal 1999
5 * (C) Copyright Gregory P. Smith 1999
6 * (C) Copyright Deti Fliegl 1999
7 * (C) Copyright Randy Dunlap 2000
8 * (C) Copyright David Brownell 2000-2002
9 *
10 * This program is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by the
12 * Free Software Foundation; either version 2 of the License, or (at your
13 * option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful, but
16 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
17 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
18 * for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software Foundation,
22 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 */
24
25#include <linux/module.h>
26#include <linux/version.h>
27#include <linux/kernel.h>
28#include <linux/slab.h>
29#include <linux/completion.h>
30#include <linux/utsname.h>
31#include <linux/mm.h>
32#include <asm/io.h>
33#include <linux/device.h>
34#include <linux/dma-mapping.h>
35#include <linux/mutex.h>
36#include <asm/irq.h>
37#include <asm/byteorder.h>
38#include <asm/unaligned.h>
39#include <linux/platform_device.h>
40#include <linux/workqueue.h>
41
42#include <linux/usb.h>
43#include <linux/usb/hcd.h>
44
45#include "usb.h"
46
47
48/*-------------------------------------------------------------------------*/
49
50/*
51 * USB Host Controller Driver framework
52 *
53 * Plugs into usbcore (usb_bus) and lets HCDs share code, minimizing
54 * HCD-specific behaviors/bugs.
55 *
56 * This does error checks, tracks devices and urbs, and delegates to a
57 * "hc_driver" only for code (and data) that really needs to know about
58 * hardware differences. That includes root hub registers, i/o queues,
59 * and so on ... but as little else as possible.
60 *
61 * Shared code includes most of the "root hub" code (these are emulated,
62 * though each HC's hardware works differently) and PCI glue, plus request
63 * tracking overhead. The HCD code should only block on spinlocks or on
64 * hardware handshaking; blocking on software events (such as other kernel
65 * threads releasing resources, or completing actions) is all generic.
66 *
67 * Happens the USB 2.0 spec says this would be invisible inside the "USBD",
68 * and includes mostly a "HCDI" (HCD Interface) along with some APIs used
69 * only by the hub driver ... and that neither should be seen or used by
70 * usb client device drivers.
71 *
72 * Contributors of ideas or unattributed patches include: David Brownell,
73 * Roman Weissgaerber, Rory Bolt, Greg Kroah-Hartman, ...
74 *
75 * HISTORY:
76 * 2002-02-21 Pull in most of the usb_bus support from usb.c; some
77 * associated cleanup. "usb_hcd" still != "usb_bus".
78 * 2001-12-12 Initial patch version for Linux 2.5.1 kernel.
79 */
80
81/*-------------------------------------------------------------------------*/
82
83/* Keep track of which host controller drivers are loaded */
84unsigned long usb_hcds_loaded;
85EXPORT_SYMBOL_GPL(usb_hcds_loaded);
86
87/* host controllers we manage */
88LIST_HEAD (usb_bus_list);
89EXPORT_SYMBOL_GPL (usb_bus_list);
90
91/* used when allocating bus numbers */
92#define USB_MAXBUS 64
93struct usb_busmap {
94 unsigned long busmap [USB_MAXBUS / (8*sizeof (unsigned long))];
95};
96static struct usb_busmap busmap;
97
98/* used when updating list of hcds */
99DEFINE_MUTEX(usb_bus_list_lock); /* exported only for usbfs */
100EXPORT_SYMBOL_GPL (usb_bus_list_lock);
101
102/* used for controlling access to virtual root hubs */
103static DEFINE_SPINLOCK(hcd_root_hub_lock);
104
105/* used when updating an endpoint's URB list */
106static DEFINE_SPINLOCK(hcd_urb_list_lock);
107
108/* used to protect against unlinking URBs after the device is gone */
109static DEFINE_SPINLOCK(hcd_urb_unlink_lock);
110
111/* wait queue for synchronous unlinks */
112DECLARE_WAIT_QUEUE_HEAD(usb_kill_urb_queue);
113
114static inline int is_root_hub(struct usb_device *udev)
115{
116 return (udev->parent == NULL);
117}
118
119/*-------------------------------------------------------------------------*/
120
121/*
122 * Sharable chunks of root hub code.
123 */
124
125/*-------------------------------------------------------------------------*/
126
127#define KERNEL_REL ((LINUX_VERSION_CODE >> 16) & 0x0ff)
128#define KERNEL_VER ((LINUX_VERSION_CODE >> 8) & 0x0ff)
129
130/* usb 3.0 root hub device descriptor */
131static const u8 usb3_rh_dev_descriptor[18] = {
132 0x12, /* __u8 bLength; */
133 0x01, /* __u8 bDescriptorType; Device */
134 0x00, 0x03, /* __le16 bcdUSB; v3.0 */
135
136 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
137 0x00, /* __u8 bDeviceSubClass; */
138 0x03, /* __u8 bDeviceProtocol; USB 3.0 hub */
139 0x09, /* __u8 bMaxPacketSize0; 2^9 = 512 Bytes */
140
141 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation */
142 0x03, 0x00, /* __le16 idProduct; device 0x0003 */
143 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
144
145 0x03, /* __u8 iManufacturer; */
146 0x02, /* __u8 iProduct; */
147 0x01, /* __u8 iSerialNumber; */
148 0x01 /* __u8 bNumConfigurations; */
149};
150
151/* usb 2.0 root hub device descriptor */
152static const u8 usb2_rh_dev_descriptor [18] = {
153 0x12, /* __u8 bLength; */
154 0x01, /* __u8 bDescriptorType; Device */
155 0x00, 0x02, /* __le16 bcdUSB; v2.0 */
156
157 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
158 0x00, /* __u8 bDeviceSubClass; */
159 0x00, /* __u8 bDeviceProtocol; [ usb 2.0 no TT ] */
160 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
161
162 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation */
163 0x02, 0x00, /* __le16 idProduct; device 0x0002 */
164 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
165
166 0x03, /* __u8 iManufacturer; */
167 0x02, /* __u8 iProduct; */
168 0x01, /* __u8 iSerialNumber; */
169 0x01 /* __u8 bNumConfigurations; */
170};
171
172/* no usb 2.0 root hub "device qualifier" descriptor: one speed only */
173
174/* usb 1.1 root hub device descriptor */
175static const u8 usb11_rh_dev_descriptor [18] = {
176 0x12, /* __u8 bLength; */
177 0x01, /* __u8 bDescriptorType; Device */
178 0x10, 0x01, /* __le16 bcdUSB; v1.1 */
179
180 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
181 0x00, /* __u8 bDeviceSubClass; */
182 0x00, /* __u8 bDeviceProtocol; [ low/full speeds only ] */
183 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
184
185 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation */
186 0x01, 0x00, /* __le16 idProduct; device 0x0001 */
187 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
188
189 0x03, /* __u8 iManufacturer; */
190 0x02, /* __u8 iProduct; */
191 0x01, /* __u8 iSerialNumber; */
192 0x01 /* __u8 bNumConfigurations; */
193};
194
195
196/*-------------------------------------------------------------------------*/
197
198/* Configuration descriptors for our root hubs */
199
200static const u8 fs_rh_config_descriptor [] = {
201
202 /* one configuration */
203 0x09, /* __u8 bLength; */
204 0x02, /* __u8 bDescriptorType; Configuration */
205 0x19, 0x00, /* __le16 wTotalLength; */
206 0x01, /* __u8 bNumInterfaces; (1) */
207 0x01, /* __u8 bConfigurationValue; */
208 0x00, /* __u8 iConfiguration; */
209 0xc0, /* __u8 bmAttributes;
210 Bit 7: must be set,
211 6: Self-powered,
212 5: Remote wakeup,
213 4..0: resvd */
214 0x00, /* __u8 MaxPower; */
215
216 /* USB 1.1:
217 * USB 2.0, single TT organization (mandatory):
218 * one interface, protocol 0
219 *
220 * USB 2.0, multiple TT organization (optional):
221 * two interfaces, protocols 1 (like single TT)
222 * and 2 (multiple TT mode) ... config is
223 * sometimes settable
224 * NOT IMPLEMENTED
225 */
226
227 /* one interface */
228 0x09, /* __u8 if_bLength; */
229 0x04, /* __u8 if_bDescriptorType; Interface */
230 0x00, /* __u8 if_bInterfaceNumber; */
231 0x00, /* __u8 if_bAlternateSetting; */
232 0x01, /* __u8 if_bNumEndpoints; */
233 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
234 0x00, /* __u8 if_bInterfaceSubClass; */
235 0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */
236 0x00, /* __u8 if_iInterface; */
237
238 /* one endpoint (status change endpoint) */
239 0x07, /* __u8 ep_bLength; */
240 0x05, /* __u8 ep_bDescriptorType; Endpoint */
241 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
242 0x03, /* __u8 ep_bmAttributes; Interrupt */
243 0x02, 0x00, /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */
244 0xff /* __u8 ep_bInterval; (255ms -- usb 2.0 spec) */
245};
246
247static const u8 hs_rh_config_descriptor [] = {
248
249 /* one configuration */
250 0x09, /* __u8 bLength; */
251 0x02, /* __u8 bDescriptorType; Configuration */
252 0x19, 0x00, /* __le16 wTotalLength; */
253 0x01, /* __u8 bNumInterfaces; (1) */
254 0x01, /* __u8 bConfigurationValue; */
255 0x00, /* __u8 iConfiguration; */
256 0xc0, /* __u8 bmAttributes;
257 Bit 7: must be set,
258 6: Self-powered,
259 5: Remote wakeup,
260 4..0: resvd */
261 0x00, /* __u8 MaxPower; */
262
263 /* USB 1.1:
264 * USB 2.0, single TT organization (mandatory):
265 * one interface, protocol 0
266 *
267 * USB 2.0, multiple TT organization (optional):
268 * two interfaces, protocols 1 (like single TT)
269 * and 2 (multiple TT mode) ... config is
270 * sometimes settable
271 * NOT IMPLEMENTED
272 */
273
274 /* one interface */
275 0x09, /* __u8 if_bLength; */
276 0x04, /* __u8 if_bDescriptorType; Interface */
277 0x00, /* __u8 if_bInterfaceNumber; */
278 0x00, /* __u8 if_bAlternateSetting; */
279 0x01, /* __u8 if_bNumEndpoints; */
280 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
281 0x00, /* __u8 if_bInterfaceSubClass; */
282 0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */
283 0x00, /* __u8 if_iInterface; */
284
285 /* one endpoint (status change endpoint) */
286 0x07, /* __u8 ep_bLength; */
287 0x05, /* __u8 ep_bDescriptorType; Endpoint */
288 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
289 0x03, /* __u8 ep_bmAttributes; Interrupt */
290 /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
291 * see hub.c:hub_configure() for details. */
292 (USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
293 0x0c /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */
294};
295
296static const u8 ss_rh_config_descriptor[] = {
297 /* one configuration */
298 0x09, /* __u8 bLength; */
299 0x02, /* __u8 bDescriptorType; Configuration */
300 0x1f, 0x00, /* __le16 wTotalLength; */
301 0x01, /* __u8 bNumInterfaces; (1) */
302 0x01, /* __u8 bConfigurationValue; */
303 0x00, /* __u8 iConfiguration; */
304 0xc0, /* __u8 bmAttributes;
305 Bit 7: must be set,
306 6: Self-powered,
307 5: Remote wakeup,
308 4..0: resvd */
309 0x00, /* __u8 MaxPower; */
310
311 /* one interface */
312 0x09, /* __u8 if_bLength; */
313 0x04, /* __u8 if_bDescriptorType; Interface */
314 0x00, /* __u8 if_bInterfaceNumber; */
315 0x00, /* __u8 if_bAlternateSetting; */
316 0x01, /* __u8 if_bNumEndpoints; */
317 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
318 0x00, /* __u8 if_bInterfaceSubClass; */
319 0x00, /* __u8 if_bInterfaceProtocol; */
320 0x00, /* __u8 if_iInterface; */
321
322 /* one endpoint (status change endpoint) */
323 0x07, /* __u8 ep_bLength; */
324 0x05, /* __u8 ep_bDescriptorType; Endpoint */
325 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
326 0x03, /* __u8 ep_bmAttributes; Interrupt */
327 /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
328 * see hub.c:hub_configure() for details. */
329 (USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
330 0x0c, /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */
331
332 /* one SuperSpeed endpoint companion descriptor */
333 0x06, /* __u8 ss_bLength */
334 0x30, /* __u8 ss_bDescriptorType; SuperSpeed EP Companion */
335 0x00, /* __u8 ss_bMaxBurst; allows 1 TX between ACKs */
336 0x00, /* __u8 ss_bmAttributes; 1 packet per service interval */
337 0x02, 0x00 /* __le16 ss_wBytesPerInterval; 15 bits for max 15 ports */
338};
339
340/* authorized_default behaviour:
341 * -1 is authorized for all devices except wireless (old behaviour)
342 * 0 is unauthorized for all devices
343 * 1 is authorized for all devices
344 */
345static int authorized_default = -1;
346module_param(authorized_default, int, S_IRUGO|S_IWUSR);
347MODULE_PARM_DESC(authorized_default,
348 "Default USB device authorization: 0 is not authorized, 1 is "
349 "authorized, -1 is authorized except for wireless USB (default, "
350 "old behaviour");
351/*-------------------------------------------------------------------------*/
352
353/**
354 * ascii2desc() - Helper routine for producing UTF-16LE string descriptors
355 * @s: Null-terminated ASCII (actually ISO-8859-1) string
356 * @buf: Buffer for USB string descriptor (header + UTF-16LE)
357 * @len: Length (in bytes; may be odd) of descriptor buffer.
358 *
359 * The return value is the number of bytes filled in: 2 + 2*strlen(s) or
360 * buflen, whichever is less.
361 *
362 * USB String descriptors can contain at most 126 characters; input
363 * strings longer than that are truncated.
364 */
365static unsigned
366ascii2desc(char const *s, u8 *buf, unsigned len)
367{
368 unsigned n, t = 2 + 2*strlen(s);
369
370 if (t > 254)
371 t = 254; /* Longest possible UTF string descriptor */
372 if (len > t)
373 len = t;
374
375 t += USB_DT_STRING << 8; /* Now t is first 16 bits to store */
376
377 n = len;
378 while (n--) {
379 *buf++ = t;
380 if (!n--)
381 break;
382 *buf++ = t >> 8;
383 t = (unsigned char)*s++;
384 }
385 return len;
386}
387
388/**
389 * rh_string() - provides string descriptors for root hub
390 * @id: the string ID number (0: langids, 1: serial #, 2: product, 3: vendor)
391 * @hcd: the host controller for this root hub
392 * @data: buffer for output packet
393 * @len: length of the provided buffer
394 *
395 * Produces either a manufacturer, product or serial number string for the
396 * virtual root hub device.
397 * Returns the number of bytes filled in: the length of the descriptor or
398 * of the provided buffer, whichever is less.
399 */
400static unsigned
401rh_string(int id, struct usb_hcd const *hcd, u8 *data, unsigned len)
402{
403 char buf[100];
404 char const *s;
405 static char const langids[4] = {4, USB_DT_STRING, 0x09, 0x04};
406
407 // language ids
408 switch (id) {
409 case 0:
410 /* Array of LANGID codes (0x0409 is MSFT-speak for "en-us") */
411 /* See http://www.usb.org/developers/docs/USB_LANGIDs.pdf */
412 if (len > 4)
413 len = 4;
414 memcpy(data, langids, len);
415 return len;
416 case 1:
417 /* Serial number */
418 s = hcd->self.bus_name;
419 break;
420 case 2:
421 /* Product name */
422 s = hcd->product_desc;
423 break;
424 case 3:
425 /* Manufacturer */
426 snprintf (buf, sizeof buf, "%s %s %s", init_utsname()->sysname,
427 init_utsname()->release, hcd->driver->description);
428 s = buf;
429 break;
430 default:
431 /* Can't happen; caller guarantees it */
432 return 0;
433 }
434
435 return ascii2desc(s, data, len);
436}
437
438
439/* Root hub control transfers execute synchronously */
440static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
441{
442 struct usb_ctrlrequest *cmd;
443 u16 typeReq, wValue, wIndex, wLength;
444 u8 *ubuf = urb->transfer_buffer;
445 u8 tbuf [sizeof (struct usb_hub_descriptor)]
446 __attribute__((aligned(4)));
447 const u8 *bufp = tbuf;
448 unsigned len = 0;
449 int status;
450 u8 patch_wakeup = 0;
451 u8 patch_protocol = 0;
452
453 might_sleep();
454
455 spin_lock_irq(&hcd_root_hub_lock);
456 status = usb_hcd_link_urb_to_ep(hcd, urb);
457 spin_unlock_irq(&hcd_root_hub_lock);
458 if (status)
459 return status;
460 urb->hcpriv = hcd; /* Indicate it's queued */
461
462 cmd = (struct usb_ctrlrequest *) urb->setup_packet;
463 typeReq = (cmd->bRequestType << 8) | cmd->bRequest;
464 wValue = le16_to_cpu (cmd->wValue);
465 wIndex = le16_to_cpu (cmd->wIndex);
466 wLength = le16_to_cpu (cmd->wLength);
467
468 if (wLength > urb->transfer_buffer_length)
469 goto error;
470
471 urb->actual_length = 0;
472 switch (typeReq) {
473
474 /* DEVICE REQUESTS */
475
476 /* The root hub's remote wakeup enable bit is implemented using
477 * driver model wakeup flags. If this system supports wakeup
478 * through USB, userspace may change the default "allow wakeup"
479 * policy through sysfs or these calls.
480 *
481 * Most root hubs support wakeup from downstream devices, for
482 * runtime power management (disabling USB clocks and reducing
483 * VBUS power usage). However, not all of them do so; silicon,
484 * board, and BIOS bugs here are not uncommon, so these can't
485 * be treated quite like external hubs.
486 *
487 * Likewise, not all root hubs will pass wakeup events upstream,
488 * to wake up the whole system. So don't assume root hub and
489 * controller capabilities are identical.
490 */
491
492 case DeviceRequest | USB_REQ_GET_STATUS:
493 tbuf [0] = (device_may_wakeup(&hcd->self.root_hub->dev)
494 << USB_DEVICE_REMOTE_WAKEUP)
495 | (1 << USB_DEVICE_SELF_POWERED);
496 tbuf [1] = 0;
497 len = 2;
498 break;
499 case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
500 if (wValue == USB_DEVICE_REMOTE_WAKEUP)
501 device_set_wakeup_enable(&hcd->self.root_hub->dev, 0);
502 else
503 goto error;
504 break;
505 case DeviceOutRequest | USB_REQ_SET_FEATURE:
506 if (device_can_wakeup(&hcd->self.root_hub->dev)
507 && wValue == USB_DEVICE_REMOTE_WAKEUP)
508 device_set_wakeup_enable(&hcd->self.root_hub->dev, 1);
509 else
510 goto error;
511 break;
512 case DeviceRequest | USB_REQ_GET_CONFIGURATION:
513 tbuf [0] = 1;
514 len = 1;
515 /* FALLTHROUGH */
516 case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
517 break;
518 case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
519 switch (wValue & 0xff00) {
520 case USB_DT_DEVICE << 8:
521 switch (hcd->speed) {
522 case HCD_USB3:
523 bufp = usb3_rh_dev_descriptor;
524 break;
525 case HCD_USB2:
526 bufp = usb2_rh_dev_descriptor;
527 break;
528 case HCD_USB11:
529 bufp = usb11_rh_dev_descriptor;
530 break;
531 default:
532 goto error;
533 }
534 len = 18;
535 if (hcd->has_tt)
536 patch_protocol = 1;
537 break;
538 case USB_DT_CONFIG << 8:
539 switch (hcd->speed) {
540 case HCD_USB3:
541 bufp = ss_rh_config_descriptor;
542 len = sizeof ss_rh_config_descriptor;
543 break;
544 case HCD_USB2:
545 bufp = hs_rh_config_descriptor;
546 len = sizeof hs_rh_config_descriptor;
547 break;
548 case HCD_USB11:
549 bufp = fs_rh_config_descriptor;
550 len = sizeof fs_rh_config_descriptor;
551 break;
552 default:
553 goto error;
554 }
555 if (device_can_wakeup(&hcd->self.root_hub->dev))
556 patch_wakeup = 1;
557 break;
558 case USB_DT_STRING << 8:
559 if ((wValue & 0xff) < 4)
560 urb->actual_length = rh_string(wValue & 0xff,
561 hcd, ubuf, wLength);
562 else /* unsupported IDs --> "protocol stall" */
563 goto error;
564 break;
565 default:
566 goto error;
567 }
568 break;
569 case DeviceRequest | USB_REQ_GET_INTERFACE:
570 tbuf [0] = 0;
571 len = 1;
572 /* FALLTHROUGH */
573 case DeviceOutRequest | USB_REQ_SET_INTERFACE:
574 break;
575 case DeviceOutRequest | USB_REQ_SET_ADDRESS:
576 // wValue == urb->dev->devaddr
577 dev_dbg (hcd->self.controller, "root hub device address %d\n",
578 wValue);
579 break;
580
581 /* INTERFACE REQUESTS (no defined feature/status flags) */
582
583 /* ENDPOINT REQUESTS */
584
585 case EndpointRequest | USB_REQ_GET_STATUS:
586 // ENDPOINT_HALT flag
587 tbuf [0] = 0;
588 tbuf [1] = 0;
589 len = 2;
590 /* FALLTHROUGH */
591 case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
592 case EndpointOutRequest | USB_REQ_SET_FEATURE:
593 dev_dbg (hcd->self.controller, "no endpoint features yet\n");
594 break;
595
596 /* CLASS REQUESTS (and errors) */
597
598 default:
599 /* non-generic request */
600 switch (typeReq) {
601 case GetHubStatus:
602 case GetPortStatus:
603 len = 4;
604 break;
605 case GetHubDescriptor:
606 len = sizeof (struct usb_hub_descriptor);
607 break;
608 }
609 status = hcd->driver->hub_control (hcd,
610 typeReq, wValue, wIndex,
611 tbuf, wLength);
612 break;
613error:
614 /* "protocol stall" on error */
615 status = -EPIPE;
616 }
617
618 if (status) {
619 len = 0;
620 if (status != -EPIPE) {
621 dev_dbg (hcd->self.controller,
622 "CTRL: TypeReq=0x%x val=0x%x "
623 "idx=0x%x len=%d ==> %d\n",
624 typeReq, wValue, wIndex,
625 wLength, status);
626 }
627 }
628 if (len) {
629 if (urb->transfer_buffer_length < len)
630 len = urb->transfer_buffer_length;
631 urb->actual_length = len;
632 // always USB_DIR_IN, toward host
633 memcpy (ubuf, bufp, len);
634
635 /* report whether RH hardware supports remote wakeup */
636 if (patch_wakeup &&
637 len > offsetof (struct usb_config_descriptor,
638 bmAttributes))
639 ((struct usb_config_descriptor *)ubuf)->bmAttributes
640 |= USB_CONFIG_ATT_WAKEUP;
641
642 /* report whether RH hardware has an integrated TT */
643 if (patch_protocol &&
644 len > offsetof(struct usb_device_descriptor,
645 bDeviceProtocol))
646 ((struct usb_device_descriptor *) ubuf)->
647 bDeviceProtocol = 1;
648 }
649
650 /* any errors get returned through the urb completion */
651 spin_lock_irq(&hcd_root_hub_lock);
652 usb_hcd_unlink_urb_from_ep(hcd, urb);
653
654 /* This peculiar use of spinlocks echoes what real HC drivers do.
655 * Avoiding calls to local_irq_disable/enable makes the code
656 * RT-friendly.
657 */
658 spin_unlock(&hcd_root_hub_lock);
659 usb_hcd_giveback_urb(hcd, urb, status);
660 spin_lock(&hcd_root_hub_lock);
661
662 spin_unlock_irq(&hcd_root_hub_lock);
663 return 0;
664}
665
666/*-------------------------------------------------------------------------*/
667
668/*
669 * Root Hub interrupt transfers are polled using a timer if the
670 * driver requests it; otherwise the driver is responsible for
671 * calling usb_hcd_poll_rh_status() when an event occurs.
672 *
673 * Completions are called in_interrupt(), but they may or may not
674 * be in_irq().
675 */
676void usb_hcd_poll_rh_status(struct usb_hcd *hcd)
677{
678 struct urb *urb;
679 int length;
680 unsigned long flags;
681 char buffer[6]; /* Any root hubs with > 31 ports? */
682
683 if (unlikely(!hcd->rh_pollable))
684 return;
685 if (!hcd->uses_new_polling && !hcd->status_urb)
686 return;
687
688 length = hcd->driver->hub_status_data(hcd, buffer);
689 if (length > 0) {
690
691 /* try to complete the status urb */
692 spin_lock_irqsave(&hcd_root_hub_lock, flags);
693 urb = hcd->status_urb;
694 if (urb) {
695 clear_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);
696 hcd->status_urb = NULL;
697 urb->actual_length = length;
698 memcpy(urb->transfer_buffer, buffer, length);
699
700 usb_hcd_unlink_urb_from_ep(hcd, urb);
701 spin_unlock(&hcd_root_hub_lock);
702 usb_hcd_giveback_urb(hcd, urb, 0);
703 spin_lock(&hcd_root_hub_lock);
704 } else {
705 length = 0;
706 set_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);
707 }
708 spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
709 }
710
711 /* The USB 2.0 spec says 256 ms. This is close enough and won't
712 * exceed that limit if HZ is 100. The math is more clunky than
713 * maybe expected, this is to make sure that all timers for USB devices
714 * fire at the same time to give the CPU a break in between */
715 if (hcd->uses_new_polling ? HCD_POLL_RH(hcd) :
716 (length == 0 && hcd->status_urb != NULL))
717 mod_timer (&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
718}
719EXPORT_SYMBOL_GPL(usb_hcd_poll_rh_status);
720
721/* timer callback */
722static void rh_timer_func (unsigned long _hcd)
723{
724 usb_hcd_poll_rh_status((struct usb_hcd *) _hcd);
725}
726
727/*-------------------------------------------------------------------------*/
728
729static int rh_queue_status (struct usb_hcd *hcd, struct urb *urb)
730{
731 int retval;
732 unsigned long flags;
733 unsigned len = 1 + (urb->dev->maxchild / 8);
734
735 spin_lock_irqsave (&hcd_root_hub_lock, flags);
736 if (hcd->status_urb || urb->transfer_buffer_length < len) {
737 dev_dbg (hcd->self.controller, "not queuing rh status urb\n");
738 retval = -EINVAL;
739 goto done;
740 }
741
742 retval = usb_hcd_link_urb_to_ep(hcd, urb);
743 if (retval)
744 goto done;
745
746 hcd->status_urb = urb;
747 urb->hcpriv = hcd; /* indicate it's queued */
748 if (!hcd->uses_new_polling)
749 mod_timer(&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
750
751 /* If a status change has already occurred, report it ASAP */
752 else if (HCD_POLL_PENDING(hcd))
753 mod_timer(&hcd->rh_timer, jiffies);
754 retval = 0;
755 done:
756 spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
757 return retval;
758}
759
760static int rh_urb_enqueue (struct usb_hcd *hcd, struct urb *urb)
761{
762 if (usb_endpoint_xfer_int(&urb->ep->desc))
763 return rh_queue_status (hcd, urb);
764 if (usb_endpoint_xfer_control(&urb->ep->desc))
765 return rh_call_control (hcd, urb);
766 return -EINVAL;
767}
768
769/*-------------------------------------------------------------------------*/
770
771/* Unlinks of root-hub control URBs are legal, but they don't do anything
772 * since these URBs always execute synchronously.
773 */
774static int usb_rh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
775{
776 unsigned long flags;
777 int rc;
778
779 spin_lock_irqsave(&hcd_root_hub_lock, flags);
780 rc = usb_hcd_check_unlink_urb(hcd, urb, status);
781 if (rc)
782 goto done;
783
784 if (usb_endpoint_num(&urb->ep->desc) == 0) { /* Control URB */
785 ; /* Do nothing */
786
787 } else { /* Status URB */
788 if (!hcd->uses_new_polling)
789 del_timer (&hcd->rh_timer);
790 if (urb == hcd->status_urb) {
791 hcd->status_urb = NULL;
792 usb_hcd_unlink_urb_from_ep(hcd, urb);
793
794 spin_unlock(&hcd_root_hub_lock);
795 usb_hcd_giveback_urb(hcd, urb, status);
796 spin_lock(&hcd_root_hub_lock);
797 }
798 }
799 done:
800 spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
801 return rc;
802}
803
804
805
806/*
807 * Show & store the current value of authorized_default
808 */
809static ssize_t usb_host_authorized_default_show(struct device *dev,
810 struct device_attribute *attr,
811 char *buf)
812{
813 struct usb_device *rh_usb_dev = to_usb_device(dev);
814 struct usb_bus *usb_bus = rh_usb_dev->bus;
815 struct usb_hcd *usb_hcd;
816
817 if (usb_bus == NULL) /* FIXME: not sure if this case is possible */
818 return -ENODEV;
819 usb_hcd = bus_to_hcd(usb_bus);
820 return snprintf(buf, PAGE_SIZE, "%u\n", usb_hcd->authorized_default);
821}
822
823static ssize_t usb_host_authorized_default_store(struct device *dev,
824 struct device_attribute *attr,
825 const char *buf, size_t size)
826{
827 ssize_t result;
828 unsigned val;
829 struct usb_device *rh_usb_dev = to_usb_device(dev);
830 struct usb_bus *usb_bus = rh_usb_dev->bus;
831 struct usb_hcd *usb_hcd;
832
833 if (usb_bus == NULL) /* FIXME: not sure if this case is possible */
834 return -ENODEV;
835 usb_hcd = bus_to_hcd(usb_bus);
836 result = sscanf(buf, "%u\n", &val);
837 if (result == 1) {
838 usb_hcd->authorized_default = val? 1 : 0;
839 result = size;
840 }
841 else
842 result = -EINVAL;
843 return result;
844}
845
846static DEVICE_ATTR(authorized_default, 0644,
847 usb_host_authorized_default_show,
848 usb_host_authorized_default_store);
849
850
851/* Group all the USB bus attributes */
852static struct attribute *usb_bus_attrs[] = {
853 &dev_attr_authorized_default.attr,
854 NULL,
855};
856
857static struct attribute_group usb_bus_attr_group = {
858 .name = NULL, /* we want them in the same directory */
859 .attrs = usb_bus_attrs,
860};
861
862
863
864/*-------------------------------------------------------------------------*/
865
866/**
867 * usb_bus_init - shared initialization code
868 * @bus: the bus structure being initialized
869 *
870 * This code is used to initialize a usb_bus structure, memory for which is
871 * separately managed.
872 */
873static void usb_bus_init (struct usb_bus *bus)
874{
875 memset (&bus->devmap, 0, sizeof(struct usb_devmap));
876
877 bus->devnum_next = 1;
878
879 bus->root_hub = NULL;
880 bus->busnum = -1;
881 bus->bandwidth_allocated = 0;
882 bus->bandwidth_int_reqs = 0;
883 bus->bandwidth_isoc_reqs = 0;
884
885 INIT_LIST_HEAD (&bus->bus_list);
886}
887
888/*-------------------------------------------------------------------------*/
889
890/**
891 * usb_register_bus - registers the USB host controller with the usb core
892 * @bus: pointer to the bus to register
893 * Context: !in_interrupt()
894 *
895 * Assigns a bus number, and links the controller into usbcore data
896 * structures so that it can be seen by scanning the bus list.
897 */
898static int usb_register_bus(struct usb_bus *bus)
899{
900 int result = -E2BIG;
901 int busnum;
902
903 mutex_lock(&usb_bus_list_lock);
904 busnum = find_next_zero_bit (busmap.busmap, USB_MAXBUS, 1);
905 if (busnum >= USB_MAXBUS) {
906 printk (KERN_ERR "%s: too many buses\n", usbcore_name);
907 goto error_find_busnum;
908 }
909 set_bit (busnum, busmap.busmap);
910 bus->busnum = busnum;
911
912 /* Add it to the local list of buses */
913 list_add (&bus->bus_list, &usb_bus_list);
914 mutex_unlock(&usb_bus_list_lock);
915
916 usb_notify_add_bus(bus);
917
918 dev_info (bus->controller, "new USB bus registered, assigned bus "
919 "number %d\n", bus->busnum);
920 return 0;
921
922error_find_busnum:
923 mutex_unlock(&usb_bus_list_lock);
924 return result;
925}
926
927/**
928 * usb_deregister_bus - deregisters the USB host controller
929 * @bus: pointer to the bus to deregister
930 * Context: !in_interrupt()
931 *
932 * Recycles the bus number, and unlinks the controller from usbcore data
933 * structures so that it won't be seen by scanning the bus list.
934 */
935static void usb_deregister_bus (struct usb_bus *bus)
936{
937 dev_info (bus->controller, "USB bus %d deregistered\n", bus->busnum);
938
939 /*
940 * NOTE: make sure that all the devices are removed by the
941 * controller code, as well as having it call this when cleaning
942 * itself up
943 */
944 mutex_lock(&usb_bus_list_lock);
945 list_del (&bus->bus_list);
946 mutex_unlock(&usb_bus_list_lock);
947
948 usb_notify_remove_bus(bus);
949
950 clear_bit (bus->busnum, busmap.busmap);
951}
952
953/**
954 * register_root_hub - called by usb_add_hcd() to register a root hub
955 * @hcd: host controller for this root hub
956 *
957 * This function registers the root hub with the USB subsystem. It sets up
958 * the device properly in the device tree and then calls usb_new_device()
959 * to register the usb device. It also assigns the root hub's USB address
960 * (always 1).
961 */
962static int register_root_hub(struct usb_hcd *hcd)
963{
964 struct device *parent_dev = hcd->self.controller;
965 struct usb_device *usb_dev = hcd->self.root_hub;
966 const int devnum = 1;
967 int retval;
968
969 usb_dev->devnum = devnum;
970 usb_dev->bus->devnum_next = devnum + 1;
971 memset (&usb_dev->bus->devmap.devicemap, 0,
972 sizeof usb_dev->bus->devmap.devicemap);
973 set_bit (devnum, usb_dev->bus->devmap.devicemap);
974 usb_set_device_state(usb_dev, USB_STATE_ADDRESS);
975
976 mutex_lock(&usb_bus_list_lock);
977
978 usb_dev->ep0.desc.wMaxPacketSize = cpu_to_le16(64);
979 retval = usb_get_device_descriptor(usb_dev, USB_DT_DEVICE_SIZE);
980 if (retval != sizeof usb_dev->descriptor) {
981 mutex_unlock(&usb_bus_list_lock);
982 dev_dbg (parent_dev, "can't read %s device descriptor %d\n",
983 dev_name(&usb_dev->dev), retval);
984 return (retval < 0) ? retval : -EMSGSIZE;
985 }
986
987 retval = usb_new_device (usb_dev);
988 if (retval) {
989 dev_err (parent_dev, "can't register root hub for %s, %d\n",
990 dev_name(&usb_dev->dev), retval);
991 }
992 mutex_unlock(&usb_bus_list_lock);
993
994 if (retval == 0) {
995 spin_lock_irq (&hcd_root_hub_lock);
996 hcd->rh_registered = 1;
997 spin_unlock_irq (&hcd_root_hub_lock);
998
999 /* Did the HC die before the root hub was registered? */
1000 if (HCD_DEAD(hcd))
1001 usb_hc_died (hcd); /* This time clean up */
1002 }
1003
1004 return retval;
1005}
1006
1007
1008/*-------------------------------------------------------------------------*/
1009
1010/**
1011 * usb_calc_bus_time - approximate periodic transaction time in nanoseconds
1012 * @speed: from dev->speed; USB_SPEED_{LOW,FULL,HIGH}
1013 * @is_input: true iff the transaction sends data to the host
1014 * @isoc: true for isochronous transactions, false for interrupt ones
1015 * @bytecount: how many bytes in the transaction.
1016 *
1017 * Returns approximate bus time in nanoseconds for a periodic transaction.
1018 * See USB 2.0 spec section 5.11.3; only periodic transfers need to be
1019 * scheduled in software, this function is only used for such scheduling.
1020 */
1021long usb_calc_bus_time (int speed, int is_input, int isoc, int bytecount)
1022{
1023 unsigned long tmp;
1024
1025 switch (speed) {
1026 case USB_SPEED_LOW: /* INTR only */
1027 if (is_input) {
1028 tmp = (67667L * (31L + 10L * BitTime (bytecount))) / 1000L;
1029 return (64060L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp);
1030 } else {
1031 tmp = (66700L * (31L + 10L * BitTime (bytecount))) / 1000L;
1032 return (64107L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp);
1033 }
1034 case USB_SPEED_FULL: /* ISOC or INTR */
1035 if (isoc) {
1036 tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
1037 return (((is_input) ? 7268L : 6265L) + BW_HOST_DELAY + tmp);
1038 } else {
1039 tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
1040 return (9107L + BW_HOST_DELAY + tmp);
1041 }
1042 case USB_SPEED_HIGH: /* ISOC or INTR */
1043 // FIXME adjust for input vs output
1044 if (isoc)
1045 tmp = HS_NSECS_ISO (bytecount);
1046 else
1047 tmp = HS_NSECS (bytecount);
1048 return tmp;
1049 default:
1050 pr_debug ("%s: bogus device speed!\n", usbcore_name);
1051 return -1;
1052 }
1053}
1054EXPORT_SYMBOL_GPL(usb_calc_bus_time);
1055
1056
1057/*-------------------------------------------------------------------------*/
1058
1059/*
1060 * Generic HC operations.
1061 */
1062
1063/*-------------------------------------------------------------------------*/
1064
1065/**
1066 * usb_hcd_link_urb_to_ep - add an URB to its endpoint queue
1067 * @hcd: host controller to which @urb was submitted
1068 * @urb: URB being submitted
1069 *
1070 * Host controller drivers should call this routine in their enqueue()
1071 * method. The HCD's private spinlock must be held and interrupts must
1072 * be disabled. The actions carried out here are required for URB
1073 * submission, as well as for endpoint shutdown and for usb_kill_urb.
1074 *
1075 * Returns 0 for no error, otherwise a negative error code (in which case
1076 * the enqueue() method must fail). If no error occurs but enqueue() fails
1077 * anyway, it must call usb_hcd_unlink_urb_from_ep() before releasing
1078 * the private spinlock and returning.
1079 */
1080int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb)
1081{
1082 int rc = 0;
1083
1084 spin_lock(&hcd_urb_list_lock);
1085
1086 /* Check that the URB isn't being killed */
1087 if (unlikely(atomic_read(&urb->reject))) {
1088 rc = -EPERM;
1089 goto done;
1090 }
1091
1092 if (unlikely(!urb->ep->enabled)) {
1093 rc = -ENOENT;
1094 goto done;
1095 }
1096
1097 if (unlikely(!urb->dev->can_submit)) {
1098 rc = -EHOSTUNREACH;
1099 goto done;
1100 }
1101
1102 /*
1103 * Check the host controller's state and add the URB to the
1104 * endpoint's queue.
1105 */
1106 if (HCD_RH_RUNNING(hcd)) {
1107 urb->unlinked = 0;
1108 list_add_tail(&urb->urb_list, &urb->ep->urb_list);
1109 } else {
1110 rc = -ESHUTDOWN;
1111 goto done;
1112 }
1113 done:
1114 spin_unlock(&hcd_urb_list_lock);
1115 return rc;
1116}
1117EXPORT_SYMBOL_GPL(usb_hcd_link_urb_to_ep);
1118
1119/**
1120 * usb_hcd_check_unlink_urb - check whether an URB may be unlinked
1121 * @hcd: host controller to which @urb was submitted
1122 * @urb: URB being checked for unlinkability
1123 * @status: error code to store in @urb if the unlink succeeds
1124 *
1125 * Host controller drivers should call this routine in their dequeue()
1126 * method. The HCD's private spinlock must be held and interrupts must
1127 * be disabled. The actions carried out here are required for making
1128 * sure than an unlink is valid.
1129 *
1130 * Returns 0 for no error, otherwise a negative error code (in which case
1131 * the dequeue() method must fail). The possible error codes are:
1132 *
1133 * -EIDRM: @urb was not submitted or has already completed.
1134 * The completion function may not have been called yet.
1135 *
1136 * -EBUSY: @urb has already been unlinked.
1137 */
1138int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
1139 int status)
1140{
1141 struct list_head *tmp;
1142
1143 /* insist the urb is still queued */
1144 list_for_each(tmp, &urb->ep->urb_list) {
1145 if (tmp == &urb->urb_list)
1146 break;
1147 }
1148 if (tmp != &urb->urb_list)
1149 return -EIDRM;
1150
1151 /* Any status except -EINPROGRESS means something already started to
1152 * unlink this URB from the hardware. So there's no more work to do.
1153 */
1154 if (urb->unlinked)
1155 return -EBUSY;
1156 urb->unlinked = status;
1157
1158 /* IRQ setup can easily be broken so that USB controllers
1159 * never get completion IRQs ... maybe even the ones we need to
1160 * finish unlinking the initial failed usb_set_address()
1161 * or device descriptor fetch.
1162 */
1163 if (!HCD_SAW_IRQ(hcd) && !is_root_hub(urb->dev)) {
1164 dev_warn(hcd->self.controller, "Unlink after no-IRQ? "
1165 "Controller is probably using the wrong IRQ.\n");
1166 set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
1167 if (hcd->shared_hcd)
1168 set_bit(HCD_FLAG_SAW_IRQ, &hcd->shared_hcd->flags);
1169 }
1170
1171 return 0;
1172}
1173EXPORT_SYMBOL_GPL(usb_hcd_check_unlink_urb);
1174
1175/**
1176 * usb_hcd_unlink_urb_from_ep - remove an URB from its endpoint queue
1177 * @hcd: host controller to which @urb was submitted
1178 * @urb: URB being unlinked
1179 *
1180 * Host controller drivers should call this routine before calling
1181 * usb_hcd_giveback_urb(). The HCD's private spinlock must be held and
1182 * interrupts must be disabled. The actions carried out here are required
1183 * for URB completion.
1184 */
1185void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb)
1186{
1187 /* clear all state linking urb to this dev (and hcd) */
1188 spin_lock(&hcd_urb_list_lock);
1189 list_del_init(&urb->urb_list);
1190 spin_unlock(&hcd_urb_list_lock);
1191}
1192EXPORT_SYMBOL_GPL(usb_hcd_unlink_urb_from_ep);
1193
1194/*
1195 * Some usb host controllers can only perform dma using a small SRAM area.
1196 * The usb core itself is however optimized for host controllers that can dma
1197 * using regular system memory - like pci devices doing bus mastering.
1198 *
1199 * To support host controllers with limited dma capabilites we provide dma
1200 * bounce buffers. This feature can be enabled using the HCD_LOCAL_MEM flag.
1201 * For this to work properly the host controller code must first use the
1202 * function dma_declare_coherent_memory() to point out which memory area
1203 * that should be used for dma allocations.
1204 *
1205 * The HCD_LOCAL_MEM flag then tells the usb code to allocate all data for
1206 * dma using dma_alloc_coherent() which in turn allocates from the memory
1207 * area pointed out with dma_declare_coherent_memory().
1208 *
1209 * So, to summarize...
1210 *
1211 * - We need "local" memory, canonical example being
1212 * a small SRAM on a discrete controller being the
1213 * only memory that the controller can read ...
1214 * (a) "normal" kernel memory is no good, and
1215 * (b) there's not enough to share
1216 *
1217 * - The only *portable* hook for such stuff in the
1218 * DMA framework is dma_declare_coherent_memory()
1219 *
1220 * - So we use that, even though the primary requirement
1221 * is that the memory be "local" (hence addressible
1222 * by that device), not "coherent".
1223 *
1224 */
1225
1226static int hcd_alloc_coherent(struct usb_bus *bus,
1227 gfp_t mem_flags, dma_addr_t *dma_handle,
1228 void **vaddr_handle, size_t size,
1229 enum dma_data_direction dir)
1230{
1231 unsigned char *vaddr;
1232
1233 if (*vaddr_handle == NULL) {
1234 WARN_ON_ONCE(1);
1235 return -EFAULT;
1236 }
1237
1238 vaddr = hcd_buffer_alloc(bus, size + sizeof(vaddr),
1239 mem_flags, dma_handle);
1240 if (!vaddr)
1241 return -ENOMEM;
1242
1243 /*
1244 * Store the virtual address of the buffer at the end
1245 * of the allocated dma buffer. The size of the buffer
1246 * may be uneven so use unaligned functions instead
1247 * of just rounding up. It makes sense to optimize for
1248 * memory footprint over access speed since the amount
1249 * of memory available for dma may be limited.
1250 */
1251 put_unaligned((unsigned long)*vaddr_handle,
1252 (unsigned long *)(vaddr + size));
1253
1254 if (dir == DMA_TO_DEVICE)
1255 memcpy(vaddr, *vaddr_handle, size);
1256
1257 *vaddr_handle = vaddr;
1258 return 0;
1259}
1260
1261static void hcd_free_coherent(struct usb_bus *bus, dma_addr_t *dma_handle,
1262 void **vaddr_handle, size_t size,
1263 enum dma_data_direction dir)
1264{
1265 unsigned char *vaddr = *vaddr_handle;
1266
1267 vaddr = (void *)get_unaligned((unsigned long *)(vaddr + size));
1268
1269 if (dir == DMA_FROM_DEVICE)
1270 memcpy(vaddr, *vaddr_handle, size);
1271
1272 hcd_buffer_free(bus, size + sizeof(vaddr), *vaddr_handle, *dma_handle);
1273
1274 *vaddr_handle = vaddr;
1275 *dma_handle = 0;
1276}
1277
1278void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *hcd, struct urb *urb)
1279{
1280 if (urb->transfer_flags & URB_SETUP_MAP_SINGLE)
1281 dma_unmap_single(hcd->self.controller,
1282 urb->setup_dma,
1283 sizeof(struct usb_ctrlrequest),
1284 DMA_TO_DEVICE);
1285 else if (urb->transfer_flags & URB_SETUP_MAP_LOCAL)
1286 hcd_free_coherent(urb->dev->bus,
1287 &urb->setup_dma,
1288 (void **) &urb->setup_packet,
1289 sizeof(struct usb_ctrlrequest),
1290 DMA_TO_DEVICE);
1291
1292 /* Make it safe to call this routine more than once */
1293 urb->transfer_flags &= ~(URB_SETUP_MAP_SINGLE | URB_SETUP_MAP_LOCAL);
1294}
1295EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_setup_for_dma);
1296
1297static void unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
1298{
1299 if (hcd->driver->unmap_urb_for_dma)
1300 hcd->driver->unmap_urb_for_dma(hcd, urb);
1301 else
1302 usb_hcd_unmap_urb_for_dma(hcd, urb);
1303}
1304
1305void usb_hcd_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
1306{
1307 enum dma_data_direction dir;
1308
1309 usb_hcd_unmap_urb_setup_for_dma(hcd, urb);
1310
1311 dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
1312 if (urb->transfer_flags & URB_DMA_MAP_SG)
1313 dma_unmap_sg(hcd->self.controller,
1314 urb->sg,
1315 urb->num_sgs,
1316 dir);
1317 else if (urb->transfer_flags & URB_DMA_MAP_PAGE)
1318 dma_unmap_page(hcd->self.controller,
1319 urb->transfer_dma,
1320 urb->transfer_buffer_length,
1321 dir);
1322 else if (urb->transfer_flags & URB_DMA_MAP_SINGLE)
1323 dma_unmap_single(hcd->self.controller,
1324 urb->transfer_dma,
1325 urb->transfer_buffer_length,
1326 dir);
1327 else if (urb->transfer_flags & URB_MAP_LOCAL)
1328 hcd_free_coherent(urb->dev->bus,
1329 &urb->transfer_dma,
1330 &urb->transfer_buffer,
1331 urb->transfer_buffer_length,
1332 dir);
1333
1334 /* Make it safe to call this routine more than once */
1335 urb->transfer_flags &= ~(URB_DMA_MAP_SG | URB_DMA_MAP_PAGE |
1336 URB_DMA_MAP_SINGLE | URB_MAP_LOCAL);
1337}
1338EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_for_dma);
1339
1340static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
1341 gfp_t mem_flags)
1342{
1343 if (hcd->driver->map_urb_for_dma)
1344 return hcd->driver->map_urb_for_dma(hcd, urb, mem_flags);
1345 else
1346 return usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
1347}
1348
1349int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
1350 gfp_t mem_flags)
1351{
1352 enum dma_data_direction dir;
1353 int ret = 0;
1354
1355 /* Map the URB's buffers for DMA access.
1356 * Lower level HCD code should use *_dma exclusively,
1357 * unless it uses pio or talks to another transport,
1358 * or uses the provided scatter gather list for bulk.
1359 */
1360
1361 if (usb_endpoint_xfer_control(&urb->ep->desc)) {
1362 if (hcd->self.uses_pio_for_control)
1363 return ret;
1364 if (hcd->self.uses_dma) {
1365 urb->setup_dma = dma_map_single(
1366 hcd->self.controller,
1367 urb->setup_packet,
1368 sizeof(struct usb_ctrlrequest),
1369 DMA_TO_DEVICE);
1370 if (dma_mapping_error(hcd->self.controller,
1371 urb->setup_dma))
1372 return -EAGAIN;
1373 urb->transfer_flags |= URB_SETUP_MAP_SINGLE;
1374 } else if (hcd->driver->flags & HCD_LOCAL_MEM) {
1375 ret = hcd_alloc_coherent(
1376 urb->dev->bus, mem_flags,
1377 &urb->setup_dma,
1378 (void **)&urb->setup_packet,
1379 sizeof(struct usb_ctrlrequest),
1380 DMA_TO_DEVICE);
1381 if (ret)
1382 return ret;
1383 urb->transfer_flags |= URB_SETUP_MAP_LOCAL;
1384 }
1385 }
1386
1387 dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
1388 if (urb->transfer_buffer_length != 0
1389 && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) {
1390 if (hcd->self.uses_dma) {
1391 if (urb->num_sgs) {
1392 int n = dma_map_sg(
1393 hcd->self.controller,
1394 urb->sg,
1395 urb->num_sgs,
1396 dir);
1397 if (n <= 0)
1398 ret = -EAGAIN;
1399 else
1400 urb->transfer_flags |= URB_DMA_MAP_SG;
1401 if (n != urb->num_sgs) {
1402 urb->num_sgs = n;
1403 urb->transfer_flags |=
1404 URB_DMA_SG_COMBINED;
1405 }
1406 } else if (urb->sg) {
1407 struct scatterlist *sg = urb->sg;
1408 urb->transfer_dma = dma_map_page(
1409 hcd->self.controller,
1410 sg_page(sg),
1411 sg->offset,
1412 urb->transfer_buffer_length,
1413 dir);
1414 if (dma_mapping_error(hcd->self.controller,
1415 urb->transfer_dma))
1416 ret = -EAGAIN;
1417 else
1418 urb->transfer_flags |= URB_DMA_MAP_PAGE;
1419 } else {
1420 urb->transfer_dma = dma_map_single(
1421 hcd->self.controller,
1422 urb->transfer_buffer,
1423 urb->transfer_buffer_length,
1424 dir);
1425 if (dma_mapping_error(hcd->self.controller,
1426 urb->transfer_dma))
1427 ret = -EAGAIN;
1428 else
1429 urb->transfer_flags |= URB_DMA_MAP_SINGLE;
1430 }
1431 } else if (hcd->driver->flags & HCD_LOCAL_MEM) {
1432 ret = hcd_alloc_coherent(
1433 urb->dev->bus, mem_flags,
1434 &urb->transfer_dma,
1435 &urb->transfer_buffer,
1436 urb->transfer_buffer_length,
1437 dir);
1438 if (ret == 0)
1439 urb->transfer_flags |= URB_MAP_LOCAL;
1440 }
1441 if (ret && (urb->transfer_flags & (URB_SETUP_MAP_SINGLE |
1442 URB_SETUP_MAP_LOCAL)))
1443 usb_hcd_unmap_urb_for_dma(hcd, urb);
1444 }
1445 return ret;
1446}
1447EXPORT_SYMBOL_GPL(usb_hcd_map_urb_for_dma);
1448
1449/*-------------------------------------------------------------------------*/
1450
1451/* may be called in any context with a valid urb->dev usecount
1452 * caller surrenders "ownership" of urb
1453 * expects usb_submit_urb() to have sanity checked and conditioned all
1454 * inputs in the urb
1455 */
1456int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
1457{
1458 int status;
1459 struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
1460
1461 /* increment urb's reference count as part of giving it to the HCD
1462 * (which will control it). HCD guarantees that it either returns
1463 * an error or calls giveback(), but not both.
1464 */
1465 usb_get_urb(urb);
1466 atomic_inc(&urb->use_count);
1467 atomic_inc(&urb->dev->urbnum);
1468 usbmon_urb_submit(&hcd->self, urb);
1469
1470 /* NOTE requirements on root-hub callers (usbfs and the hub
1471 * driver, for now): URBs' urb->transfer_buffer must be
1472 * valid and usb_buffer_{sync,unmap}() not be needed, since
1473 * they could clobber root hub response data. Also, control
1474 * URBs must be submitted in process context with interrupts
1475 * enabled.
1476 */
1477
1478 if (is_root_hub(urb->dev)) {
1479 status = rh_urb_enqueue(hcd, urb);
1480 } else {
1481 status = map_urb_for_dma(hcd, urb, mem_flags);
1482 if (likely(status == 0)) {
1483 status = hcd->driver->urb_enqueue(hcd, urb, mem_flags);
1484 if (unlikely(status))
1485 unmap_urb_for_dma(hcd, urb);
1486 }
1487 }
1488
1489 if (unlikely(status)) {
1490 usbmon_urb_submit_error(&hcd->self, urb, status);
1491 urb->hcpriv = NULL;
1492 INIT_LIST_HEAD(&urb->urb_list);
1493 atomic_dec(&urb->use_count);
1494 atomic_dec(&urb->dev->urbnum);
1495 if (atomic_read(&urb->reject))
1496 wake_up(&usb_kill_urb_queue);
1497 usb_put_urb(urb);
1498 }
1499 return status;
1500}
1501
1502/*-------------------------------------------------------------------------*/
1503
1504/* this makes the hcd giveback() the urb more quickly, by kicking it
1505 * off hardware queues (which may take a while) and returning it as
1506 * soon as practical. we've already set up the urb's return status,
1507 * but we can't know if the callback completed already.
1508 */
1509static int unlink1(struct usb_hcd *hcd, struct urb *urb, int status)
1510{
1511 int value;
1512
1513 if (is_root_hub(urb->dev))
1514 value = usb_rh_urb_dequeue(hcd, urb, status);
1515 else {
1516
1517 /* The only reason an HCD might fail this call is if
1518 * it has not yet fully queued the urb to begin with.
1519 * Such failures should be harmless. */
1520 value = hcd->driver->urb_dequeue(hcd, urb, status);
1521 }
1522 return value;
1523}
1524
1525/*
1526 * called in any context
1527 *
1528 * caller guarantees urb won't be recycled till both unlink()
1529 * and the urb's completion function return
1530 */
1531int usb_hcd_unlink_urb (struct urb *urb, int status)
1532{
1533 struct usb_hcd *hcd;
1534 int retval = -EIDRM;
1535 unsigned long flags;
1536
1537 /* Prevent the device and bus from going away while
1538 * the unlink is carried out. If they are already gone
1539 * then urb->use_count must be 0, since disconnected
1540 * devices can't have any active URBs.
1541 */
1542 spin_lock_irqsave(&hcd_urb_unlink_lock, flags);
1543 if (atomic_read(&urb->use_count) > 0) {
1544 retval = 0;
1545 usb_get_dev(urb->dev);
1546 }
1547 spin_unlock_irqrestore(&hcd_urb_unlink_lock, flags);
1548 if (retval == 0) {
1549 hcd = bus_to_hcd(urb->dev->bus);
1550 retval = unlink1(hcd, urb, status);
1551 usb_put_dev(urb->dev);
1552 }
1553
1554 if (retval == 0)
1555 retval = -EINPROGRESS;
1556 else if (retval != -EIDRM && retval != -EBUSY)
1557 dev_dbg(&urb->dev->dev, "hcd_unlink_urb %p fail %d\n",
1558 urb, retval);
1559 return retval;
1560}
1561
1562/*-------------------------------------------------------------------------*/
1563
1564/**
1565 * usb_hcd_giveback_urb - return URB from HCD to device driver
1566 * @hcd: host controller returning the URB
1567 * @urb: urb being returned to the USB device driver.
1568 * @status: completion status code for the URB.
1569 * Context: in_interrupt()
1570 *
1571 * This hands the URB from HCD to its USB device driver, using its
1572 * completion function. The HCD has freed all per-urb resources
1573 * (and is done using urb->hcpriv). It also released all HCD locks;
1574 * the device driver won't cause problems if it frees, modifies,
1575 * or resubmits this URB.
1576 *
1577 * If @urb was unlinked, the value of @status will be overridden by
1578 * @urb->unlinked. Erroneous short transfers are detected in case
1579 * the HCD hasn't checked for them.
1580 */
1581void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, int status)
1582{
1583 urb->hcpriv = NULL;
1584 if (unlikely(urb->unlinked))
1585 status = urb->unlinked;
1586 else if (unlikely((urb->transfer_flags & URB_SHORT_NOT_OK) &&
1587 urb->actual_length < urb->transfer_buffer_length &&
1588 !status))
1589 status = -EREMOTEIO;
1590
1591 unmap_urb_for_dma(hcd, urb);
1592 usbmon_urb_complete(&hcd->self, urb, status);
1593 usb_unanchor_urb(urb);
1594
1595 /* pass ownership to the completion handler */
1596 urb->status = status;
1597 urb->complete (urb);
1598 atomic_dec (&urb->use_count);
1599 if (unlikely(atomic_read(&urb->reject)))
1600 wake_up (&usb_kill_urb_queue);
1601 usb_put_urb (urb);
1602}
1603EXPORT_SYMBOL_GPL(usb_hcd_giveback_urb);
1604
1605/*-------------------------------------------------------------------------*/
1606
1607/* Cancel all URBs pending on this endpoint and wait for the endpoint's
1608 * queue to drain completely. The caller must first insure that no more
1609 * URBs can be submitted for this endpoint.
1610 */
1611void usb_hcd_flush_endpoint(struct usb_device *udev,
1612 struct usb_host_endpoint *ep)
1613{
1614 struct usb_hcd *hcd;
1615 struct urb *urb;
1616
1617 if (!ep)
1618 return;
1619 might_sleep();
1620 hcd = bus_to_hcd(udev->bus);
1621
1622 /* No more submits can occur */
1623 spin_lock_irq(&hcd_urb_list_lock);
1624rescan:
1625 list_for_each_entry (urb, &ep->urb_list, urb_list) {
1626 int is_in;
1627
1628 if (urb->unlinked)
1629 continue;
1630 usb_get_urb (urb);
1631 is_in = usb_urb_dir_in(urb);
1632 spin_unlock(&hcd_urb_list_lock);
1633
1634 /* kick hcd */
1635 unlink1(hcd, urb, -ESHUTDOWN);
1636 dev_dbg (hcd->self.controller,
1637 "shutdown urb %p ep%d%s%s\n",
1638 urb, usb_endpoint_num(&ep->desc),
1639 is_in ? "in" : "out",
1640 ({ char *s;
1641
1642 switch (usb_endpoint_type(&ep->desc)) {
1643 case USB_ENDPOINT_XFER_CONTROL:
1644 s = ""; break;
1645 case USB_ENDPOINT_XFER_BULK:
1646 s = "-bulk"; break;
1647 case USB_ENDPOINT_XFER_INT:
1648 s = "-intr"; break;
1649 default:
1650 s = "-iso"; break;
1651 };
1652 s;
1653 }));
1654 usb_put_urb (urb);
1655
1656 /* list contents may have changed */
1657 spin_lock(&hcd_urb_list_lock);
1658 goto rescan;
1659 }
1660 spin_unlock_irq(&hcd_urb_list_lock);
1661
1662 /* Wait until the endpoint queue is completely empty */
1663 while (!list_empty (&ep->urb_list)) {
1664 spin_lock_irq(&hcd_urb_list_lock);
1665
1666 /* The list may have changed while we acquired the spinlock */
1667 urb = NULL;
1668 if (!list_empty (&ep->urb_list)) {
1669 urb = list_entry (ep->urb_list.prev, struct urb,
1670 urb_list);
1671 usb_get_urb (urb);
1672 }
1673 spin_unlock_irq(&hcd_urb_list_lock);
1674
1675 if (urb) {
1676 usb_kill_urb (urb);
1677 usb_put_urb (urb);
1678 }
1679 }
1680}
1681
1682/**
1683 * usb_hcd_alloc_bandwidth - check whether a new bandwidth setting exceeds
1684 * the bus bandwidth
1685 * @udev: target &usb_device
1686 * @new_config: new configuration to install
1687 * @cur_alt: the current alternate interface setting
1688 * @new_alt: alternate interface setting that is being installed
1689 *
1690 * To change configurations, pass in the new configuration in new_config,
1691 * and pass NULL for cur_alt and new_alt.
1692 *
1693 * To reset a device's configuration (put the device in the ADDRESSED state),
1694 * pass in NULL for new_config, cur_alt, and new_alt.
1695 *
1696 * To change alternate interface settings, pass in NULL for new_config,
1697 * pass in the current alternate interface setting in cur_alt,
1698 * and pass in the new alternate interface setting in new_alt.
1699 *
1700 * Returns an error if the requested bandwidth change exceeds the
1701 * bus bandwidth or host controller internal resources.
1702 */
1703int usb_hcd_alloc_bandwidth(struct usb_device *udev,
1704 struct usb_host_config *new_config,
1705 struct usb_host_interface *cur_alt,
1706 struct usb_host_interface *new_alt)
1707{
1708 int num_intfs, i, j;
1709 struct usb_host_interface *alt = NULL;
1710 int ret = 0;
1711 struct usb_hcd *hcd;
1712 struct usb_host_endpoint *ep;
1713
1714 hcd = bus_to_hcd(udev->bus);
1715 if (!hcd->driver->check_bandwidth)
1716 return 0;
1717
1718 /* Configuration is being removed - set configuration 0 */
1719 if (!new_config && !cur_alt) {
1720 for (i = 1; i < 16; ++i) {
1721 ep = udev->ep_out[i];
1722 if (ep)
1723 hcd->driver->drop_endpoint(hcd, udev, ep);
1724 ep = udev->ep_in[i];
1725 if (ep)
1726 hcd->driver->drop_endpoint(hcd, udev, ep);
1727 }
1728 hcd->driver->check_bandwidth(hcd, udev);
1729 return 0;
1730 }
1731 /* Check if the HCD says there's enough bandwidth. Enable all endpoints
1732 * each interface's alt setting 0 and ask the HCD to check the bandwidth
1733 * of the bus. There will always be bandwidth for endpoint 0, so it's
1734 * ok to exclude it.
1735 */
1736 if (new_config) {
1737 num_intfs = new_config->desc.bNumInterfaces;
1738 /* Remove endpoints (except endpoint 0, which is always on the
1739 * schedule) from the old config from the schedule
1740 */
1741 for (i = 1; i < 16; ++i) {
1742 ep = udev->ep_out[i];
1743 if (ep) {
1744 ret = hcd->driver->drop_endpoint(hcd, udev, ep);
1745 if (ret < 0)
1746 goto reset;
1747 }
1748 ep = udev->ep_in[i];
1749 if (ep) {
1750 ret = hcd->driver->drop_endpoint(hcd, udev, ep);
1751 if (ret < 0)
1752 goto reset;
1753 }
1754 }
1755 for (i = 0; i < num_intfs; ++i) {
1756 struct usb_host_interface *first_alt;
1757 int iface_num;
1758
1759 first_alt = &new_config->intf_cache[i]->altsetting[0];
1760 iface_num = first_alt->desc.bInterfaceNumber;
1761 /* Set up endpoints for alternate interface setting 0 */
1762 alt = usb_find_alt_setting(new_config, iface_num, 0);
1763 if (!alt)
1764 /* No alt setting 0? Pick the first setting. */
1765 alt = first_alt;
1766
1767 for (j = 0; j < alt->desc.bNumEndpoints; j++) {
1768 ret = hcd->driver->add_endpoint(hcd, udev, &alt->endpoint[j]);
1769 if (ret < 0)
1770 goto reset;
1771 }
1772 }
1773 }
1774 if (cur_alt && new_alt) {
1775 struct usb_interface *iface = usb_ifnum_to_if(udev,
1776 cur_alt->desc.bInterfaceNumber);
1777
1778 if (!iface)
1779 return -EINVAL;
1780 if (iface->resetting_device) {
1781 /*
1782 * The USB core just reset the device, so the xHCI host
1783 * and the device will think alt setting 0 is installed.
1784 * However, the USB core will pass in the alternate
1785 * setting installed before the reset as cur_alt. Dig
1786 * out the alternate setting 0 structure, or the first
1787 * alternate setting if a broken device doesn't have alt
1788 * setting 0.
1789 */
1790 cur_alt = usb_altnum_to_altsetting(iface, 0);
1791 if (!cur_alt)
1792 cur_alt = &iface->altsetting[0];
1793 }
1794
1795 /* Drop all the endpoints in the current alt setting */
1796 for (i = 0; i < cur_alt->desc.bNumEndpoints; i++) {
1797 ret = hcd->driver->drop_endpoint(hcd, udev,
1798 &cur_alt->endpoint[i]);
1799 if (ret < 0)
1800 goto reset;
1801 }
1802 /* Add all the endpoints in the new alt setting */
1803 for (i = 0; i < new_alt->desc.bNumEndpoints; i++) {
1804 ret = hcd->driver->add_endpoint(hcd, udev,
1805 &new_alt->endpoint[i]);
1806 if (ret < 0)
1807 goto reset;
1808 }
1809 }
1810 ret = hcd->driver->check_bandwidth(hcd, udev);
1811reset:
1812 if (ret < 0)
1813 hcd->driver->reset_bandwidth(hcd, udev);
1814 return ret;
1815}
1816
1817/* Disables the endpoint: synchronizes with the hcd to make sure all
1818 * endpoint state is gone from hardware. usb_hcd_flush_endpoint() must
1819 * have been called previously. Use for set_configuration, set_interface,
1820 * driver removal, physical disconnect.
1821 *
1822 * example: a qh stored in ep->hcpriv, holding state related to endpoint
1823 * type, maxpacket size, toggle, halt status, and scheduling.
1824 */
1825void usb_hcd_disable_endpoint(struct usb_device *udev,
1826 struct usb_host_endpoint *ep)
1827{
1828 struct usb_hcd *hcd;
1829
1830 might_sleep();
1831 hcd = bus_to_hcd(udev->bus);
1832 if (hcd->driver->endpoint_disable)
1833 hcd->driver->endpoint_disable(hcd, ep);
1834}
1835
1836/**
1837 * usb_hcd_reset_endpoint - reset host endpoint state
1838 * @udev: USB device.
1839 * @ep: the endpoint to reset.
1840 *
1841 * Resets any host endpoint state such as the toggle bit, sequence
1842 * number and current window.
1843 */
1844void usb_hcd_reset_endpoint(struct usb_device *udev,
1845 struct usb_host_endpoint *ep)
1846{
1847 struct usb_hcd *hcd = bus_to_hcd(udev->bus);
1848
1849 if (hcd->driver->endpoint_reset)
1850 hcd->driver->endpoint_reset(hcd, ep);
1851 else {
1852 int epnum = usb_endpoint_num(&ep->desc);
1853 int is_out = usb_endpoint_dir_out(&ep->desc);
1854 int is_control = usb_endpoint_xfer_control(&ep->desc);
1855
1856 usb_settoggle(udev, epnum, is_out, 0);
1857 if (is_control)
1858 usb_settoggle(udev, epnum, !is_out, 0);
1859 }
1860}
1861
1862/**
1863 * usb_alloc_streams - allocate bulk endpoint stream IDs.
1864 * @interface: alternate setting that includes all endpoints.
1865 * @eps: array of endpoints that need streams.
1866 * @num_eps: number of endpoints in the array.
1867 * @num_streams: number of streams to allocate.
1868 * @mem_flags: flags hcd should use to allocate memory.
1869 *
1870 * Sets up a group of bulk endpoints to have num_streams stream IDs available.
1871 * Drivers may queue multiple transfers to different stream IDs, which may
1872 * complete in a different order than they were queued.
1873 */
1874int usb_alloc_streams(struct usb_interface *interface,
1875 struct usb_host_endpoint **eps, unsigned int num_eps,
1876 unsigned int num_streams, gfp_t mem_flags)
1877{
1878 struct usb_hcd *hcd;
1879 struct usb_device *dev;
1880 int i;
1881
1882 dev = interface_to_usbdev(interface);
1883 hcd = bus_to_hcd(dev->bus);
1884 if (!hcd->driver->alloc_streams || !hcd->driver->free_streams)
1885 return -EINVAL;
1886 if (dev->speed != USB_SPEED_SUPER)
1887 return -EINVAL;
1888
1889 /* Streams only apply to bulk endpoints. */
1890 for (i = 0; i < num_eps; i++)
1891 if (!usb_endpoint_xfer_bulk(&eps[i]->desc))
1892 return -EINVAL;
1893
1894 return hcd->driver->alloc_streams(hcd, dev, eps, num_eps,
1895 num_streams, mem_flags);
1896}
1897EXPORT_SYMBOL_GPL(usb_alloc_streams);
1898
1899/**
1900 * usb_free_streams - free bulk endpoint stream IDs.
1901 * @interface: alternate setting that includes all endpoints.
1902 * @eps: array of endpoints to remove streams from.
1903 * @num_eps: number of endpoints in the array.
1904 * @mem_flags: flags hcd should use to allocate memory.
1905 *
1906 * Reverts a group of bulk endpoints back to not using stream IDs.
1907 * Can fail if we are given bad arguments, or HCD is broken.
1908 */
1909void usb_free_streams(struct usb_interface *interface,
1910 struct usb_host_endpoint **eps, unsigned int num_eps,
1911 gfp_t mem_flags)
1912{
1913 struct usb_hcd *hcd;
1914 struct usb_device *dev;
1915 int i;
1916
1917 dev = interface_to_usbdev(interface);
1918 hcd = bus_to_hcd(dev->bus);
1919 if (dev->speed != USB_SPEED_SUPER)
1920 return;
1921
1922 /* Streams only apply to bulk endpoints. */
1923 for (i = 0; i < num_eps; i++)
1924 if (!eps[i] || !usb_endpoint_xfer_bulk(&eps[i]->desc))
1925 return;
1926
1927 hcd->driver->free_streams(hcd, dev, eps, num_eps, mem_flags);
1928}
1929EXPORT_SYMBOL_GPL(usb_free_streams);
1930
1931/* Protect against drivers that try to unlink URBs after the device
1932 * is gone, by waiting until all unlinks for @udev are finished.
1933 * Since we don't currently track URBs by device, simply wait until
1934 * nothing is running in the locked region of usb_hcd_unlink_urb().
1935 */
1936void usb_hcd_synchronize_unlinks(struct usb_device *udev)
1937{
1938 spin_lock_irq(&hcd_urb_unlink_lock);
1939 spin_unlock_irq(&hcd_urb_unlink_lock);
1940}
1941
1942/*-------------------------------------------------------------------------*/
1943
1944/* called in any context */
1945int usb_hcd_get_frame_number (struct usb_device *udev)
1946{
1947 struct usb_hcd *hcd = bus_to_hcd(udev->bus);
1948
1949 if (!HCD_RH_RUNNING(hcd))
1950 return -ESHUTDOWN;
1951 return hcd->driver->get_frame_number (hcd);
1952}
1953
1954/*-------------------------------------------------------------------------*/
1955
1956#ifdef CONFIG_PM
1957
1958int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg)
1959{
1960 struct usb_hcd *hcd = container_of(rhdev->bus, struct usb_hcd, self);
1961 int status;
1962 int old_state = hcd->state;
1963
1964 dev_dbg(&rhdev->dev, "bus %s%s\n",
1965 (msg.event & PM_EVENT_AUTO ? "auto-" : ""), "suspend");
1966 if (HCD_DEAD(hcd)) {
1967 dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "suspend");
1968 return 0;
1969 }
1970
1971 if (!hcd->driver->bus_suspend) {
1972 status = -ENOENT;
1973 } else {
1974 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
1975 hcd->state = HC_STATE_QUIESCING;
1976 status = hcd->driver->bus_suspend(hcd);
1977 }
1978 if (status == 0) {
1979 usb_set_device_state(rhdev, USB_STATE_SUSPENDED);
1980 hcd->state = HC_STATE_SUSPENDED;
1981 } else {
1982 spin_lock_irq(&hcd_root_hub_lock);
1983 if (!HCD_DEAD(hcd)) {
1984 set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
1985 hcd->state = old_state;
1986 }
1987 spin_unlock_irq(&hcd_root_hub_lock);
1988 dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
1989 "suspend", status);
1990 }
1991 return status;
1992}
1993
1994int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
1995{
1996 struct usb_hcd *hcd = container_of(rhdev->bus, struct usb_hcd, self);
1997 int status;
1998 int old_state = hcd->state;
1999
2000 dev_dbg(&rhdev->dev, "usb %s%s\n",
2001 (msg.event & PM_EVENT_AUTO ? "auto-" : ""), "resume");
2002 if (HCD_DEAD(hcd)) {
2003 dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "resume");
2004 return 0;
2005 }
2006 if (!hcd->driver->bus_resume)
2007 return -ENOENT;
2008 if (HCD_RH_RUNNING(hcd))
2009 return 0;
2010
2011 hcd->state = HC_STATE_RESUMING;
2012 status = hcd->driver->bus_resume(hcd);
2013 clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
2014 if (status == 0) {
2015 /* TRSMRCY = 10 msec */
2016 msleep(10);
2017 spin_lock_irq(&hcd_root_hub_lock);
2018 if (!HCD_DEAD(hcd)) {
2019 usb_set_device_state(rhdev, rhdev->actconfig
2020 ? USB_STATE_CONFIGURED
2021 : USB_STATE_ADDRESS);
2022 set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2023 hcd->state = HC_STATE_RUNNING;
2024 }
2025 spin_unlock_irq(&hcd_root_hub_lock);
2026 } else {
2027 hcd->state = old_state;
2028 dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
2029 "resume", status);
2030 if (status != -ESHUTDOWN)
2031 usb_hc_died(hcd);
2032 }
2033 return status;
2034}
2035
2036#endif /* CONFIG_PM */
2037
2038#ifdef CONFIG_USB_SUSPEND
2039
2040/* Workqueue routine for root-hub remote wakeup */
2041static void hcd_resume_work(struct work_struct *work)
2042{
2043 struct usb_hcd *hcd = container_of(work, struct usb_hcd, wakeup_work);
2044 struct usb_device *udev = hcd->self.root_hub;
2045
2046 usb_lock_device(udev);
2047 usb_remote_wakeup(udev);
2048 usb_unlock_device(udev);
2049}
2050
2051/**
2052 * usb_hcd_resume_root_hub - called by HCD to resume its root hub
2053 * @hcd: host controller for this root hub
2054 *
2055 * The USB host controller calls this function when its root hub is
2056 * suspended (with the remote wakeup feature enabled) and a remote
2057 * wakeup request is received. The routine submits a workqueue request
2058 * to resume the root hub (that is, manage its downstream ports again).
2059 */
2060void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
2061{
2062 unsigned long flags;
2063
2064 spin_lock_irqsave (&hcd_root_hub_lock, flags);
2065 if (hcd->rh_registered) {
2066 set_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
2067 queue_work(pm_wq, &hcd->wakeup_work);
2068 }
2069 spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
2070}
2071EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub);
2072
2073#endif /* CONFIG_USB_SUSPEND */
2074
2075/*-------------------------------------------------------------------------*/
2076
2077#ifdef CONFIG_USB_OTG
2078
2079/**
2080 * usb_bus_start_enum - start immediate enumeration (for OTG)
2081 * @bus: the bus (must use hcd framework)
2082 * @port_num: 1-based number of port; usually bus->otg_port
2083 * Context: in_interrupt()
2084 *
2085 * Starts enumeration, with an immediate reset followed later by
2086 * khubd identifying and possibly configuring the device.
2087 * This is needed by OTG controller drivers, where it helps meet
2088 * HNP protocol timing requirements for starting a port reset.
2089 */
2090int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num)
2091{
2092 struct usb_hcd *hcd;
2093 int status = -EOPNOTSUPP;
2094
2095 /* NOTE: since HNP can't start by grabbing the bus's address0_sem,
2096 * boards with root hubs hooked up to internal devices (instead of
2097 * just the OTG port) may need more attention to resetting...
2098 */
2099 hcd = container_of (bus, struct usb_hcd, self);
2100 if (port_num && hcd->driver->start_port_reset)
2101 status = hcd->driver->start_port_reset(hcd, port_num);
2102
2103 /* run khubd shortly after (first) root port reset finishes;
2104 * it may issue others, until at least 50 msecs have passed.
2105 */
2106 if (status == 0)
2107 mod_timer(&hcd->rh_timer, jiffies + msecs_to_jiffies(10));
2108 return status;
2109}
2110EXPORT_SYMBOL_GPL(usb_bus_start_enum);
2111
2112#endif
2113
2114/*-------------------------------------------------------------------------*/
2115
2116/**
2117 * usb_hcd_irq - hook IRQs to HCD framework (bus glue)
2118 * @irq: the IRQ being raised
2119 * @__hcd: pointer to the HCD whose IRQ is being signaled
2120 *
2121 * If the controller isn't HALTed, calls the driver's irq handler.
2122 * Checks whether the controller is now dead.
2123 */
2124irqreturn_t usb_hcd_irq (int irq, void *__hcd)
2125{
2126 struct usb_hcd *hcd = __hcd;
2127 unsigned long flags;
2128 irqreturn_t rc;
2129
2130 /* IRQF_DISABLED doesn't work correctly with shared IRQs
2131 * when the first handler doesn't use it. So let's just
2132 * assume it's never used.
2133 */
2134 local_irq_save(flags);
2135
2136 if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd))) {
2137 rc = IRQ_NONE;
2138 } else if (hcd->driver->irq(hcd) == IRQ_NONE) {
2139 rc = IRQ_NONE;
2140 } else {
2141 set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
2142 if (hcd->shared_hcd)
2143 set_bit(HCD_FLAG_SAW_IRQ, &hcd->shared_hcd->flags);
2144 rc = IRQ_HANDLED;
2145 }
2146
2147 local_irq_restore(flags);
2148 return rc;
2149}
2150EXPORT_SYMBOL_GPL(usb_hcd_irq);
2151
2152/*-------------------------------------------------------------------------*/
2153
2154/**
2155 * usb_hc_died - report abnormal shutdown of a host controller (bus glue)
2156 * @hcd: pointer to the HCD representing the controller
2157 *
2158 * This is called by bus glue to report a USB host controller that died
2159 * while operations may still have been pending. It's called automatically
2160 * by the PCI glue, so only glue for non-PCI busses should need to call it.
2161 *
2162 * Only call this function with the primary HCD.
2163 */
2164void usb_hc_died (struct usb_hcd *hcd)
2165{
2166 unsigned long flags;
2167
2168 dev_err (hcd->self.controller, "HC died; cleaning up\n");
2169
2170 spin_lock_irqsave (&hcd_root_hub_lock, flags);
2171 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2172 set_bit(HCD_FLAG_DEAD, &hcd->flags);
2173 if (hcd->rh_registered) {
2174 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2175
2176 /* make khubd clean up old urbs and devices */
2177 usb_set_device_state (hcd->self.root_hub,
2178 USB_STATE_NOTATTACHED);
2179 usb_kick_khubd (hcd->self.root_hub);
2180 }
2181 if (usb_hcd_is_primary_hcd(hcd) && hcd->shared_hcd) {
2182 hcd = hcd->shared_hcd;
2183 if (hcd->rh_registered) {
2184 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2185
2186 /* make khubd clean up old urbs and devices */
2187 usb_set_device_state(hcd->self.root_hub,
2188 USB_STATE_NOTATTACHED);
2189 usb_kick_khubd(hcd->self.root_hub);
2190 }
2191 }
2192 spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
2193 /* Make sure that the other roothub is also deallocated. */
2194}
2195EXPORT_SYMBOL_GPL (usb_hc_died);
2196
2197/*-------------------------------------------------------------------------*/
2198
2199/**
2200 * usb_create_shared_hcd - create and initialize an HCD structure
2201 * @driver: HC driver that will use this hcd
2202 * @dev: device for this HC, stored in hcd->self.controller
2203 * @bus_name: value to store in hcd->self.bus_name
2204 * @primary_hcd: a pointer to the usb_hcd structure that is sharing the
2205 * PCI device. Only allocate certain resources for the primary HCD
2206 * Context: !in_interrupt()
2207 *
2208 * Allocate a struct usb_hcd, with extra space at the end for the
2209 * HC driver's private data. Initialize the generic members of the
2210 * hcd structure.
2211 *
2212 * If memory is unavailable, returns NULL.
2213 */
2214struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver,
2215 struct device *dev, const char *bus_name,
2216 struct usb_hcd *primary_hcd)
2217{
2218 struct usb_hcd *hcd;
2219
2220 hcd = kzalloc(sizeof(*hcd) + driver->hcd_priv_size, GFP_KERNEL);
2221 if (!hcd) {
2222 dev_dbg (dev, "hcd alloc failed\n");
2223 return NULL;
2224 }
2225 if (primary_hcd == NULL) {
2226 hcd->bandwidth_mutex = kmalloc(sizeof(*hcd->bandwidth_mutex),
2227 GFP_KERNEL);
2228 if (!hcd->bandwidth_mutex) {
2229 kfree(hcd);
2230 dev_dbg(dev, "hcd bandwidth mutex alloc failed\n");
2231 return NULL;
2232 }
2233 mutex_init(hcd->bandwidth_mutex);
2234 dev_set_drvdata(dev, hcd);
2235 } else {
2236 hcd->bandwidth_mutex = primary_hcd->bandwidth_mutex;
2237 hcd->primary_hcd = primary_hcd;
2238 primary_hcd->primary_hcd = primary_hcd;
2239 hcd->shared_hcd = primary_hcd;
2240 primary_hcd->shared_hcd = hcd;
2241 }
2242
2243 kref_init(&hcd->kref);
2244
2245 usb_bus_init(&hcd->self);
2246 hcd->self.controller = dev;
2247 hcd->self.bus_name = bus_name;
2248 hcd->self.uses_dma = (dev->dma_mask != NULL);
2249
2250 init_timer(&hcd->rh_timer);
2251 hcd->rh_timer.function = rh_timer_func;
2252 hcd->rh_timer.data = (unsigned long) hcd;
2253#ifdef CONFIG_USB_SUSPEND
2254 INIT_WORK(&hcd->wakeup_work, hcd_resume_work);
2255#endif
2256
2257 hcd->driver = driver;
2258 hcd->speed = driver->flags & HCD_MASK;
2259 hcd->product_desc = (driver->product_desc) ? driver->product_desc :
2260 "USB Host Controller";
2261 return hcd;
2262}
2263EXPORT_SYMBOL_GPL(usb_create_shared_hcd);
2264
2265/**
2266 * usb_create_hcd - create and initialize an HCD structure
2267 * @driver: HC driver that will use this hcd
2268 * @dev: device for this HC, stored in hcd->self.controller
2269 * @bus_name: value to store in hcd->self.bus_name
2270 * Context: !in_interrupt()
2271 *
2272 * Allocate a struct usb_hcd, with extra space at the end for the
2273 * HC driver's private data. Initialize the generic members of the
2274 * hcd structure.
2275 *
2276 * If memory is unavailable, returns NULL.
2277 */
2278struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
2279 struct device *dev, const char *bus_name)
2280{
2281 return usb_create_shared_hcd(driver, dev, bus_name, NULL);
2282}
2283EXPORT_SYMBOL_GPL(usb_create_hcd);
2284
2285/*
2286 * Roothubs that share one PCI device must also share the bandwidth mutex.
2287 * Don't deallocate the bandwidth_mutex until the last shared usb_hcd is
2288 * deallocated.
2289 *
2290 * Make sure to only deallocate the bandwidth_mutex when the primary HCD is
2291 * freed. When hcd_release() is called for the non-primary HCD, set the
2292 * primary_hcd's shared_hcd pointer to null (since the non-primary HCD will be
2293 * freed shortly).
2294 */
2295static void hcd_release (struct kref *kref)
2296{
2297 struct usb_hcd *hcd = container_of (kref, struct usb_hcd, kref);
2298
2299 if (usb_hcd_is_primary_hcd(hcd))
2300 kfree(hcd->bandwidth_mutex);
2301 else
2302 hcd->shared_hcd->shared_hcd = NULL;
2303 kfree(hcd);
2304}
2305
2306struct usb_hcd *usb_get_hcd (struct usb_hcd *hcd)
2307{
2308 if (hcd)
2309 kref_get (&hcd->kref);
2310 return hcd;
2311}
2312EXPORT_SYMBOL_GPL(usb_get_hcd);
2313
2314void usb_put_hcd (struct usb_hcd *hcd)
2315{
2316 if (hcd)
2317 kref_put (&hcd->kref, hcd_release);
2318}
2319EXPORT_SYMBOL_GPL(usb_put_hcd);
2320
2321int usb_hcd_is_primary_hcd(struct usb_hcd *hcd)
2322{
2323 if (!hcd->primary_hcd)
2324 return 1;
2325 return hcd == hcd->primary_hcd;
2326}
2327EXPORT_SYMBOL_GPL(usb_hcd_is_primary_hcd);
2328
2329static int usb_hcd_request_irqs(struct usb_hcd *hcd,
2330 unsigned int irqnum, unsigned long irqflags)
2331{
2332 int retval;
2333
2334 if (hcd->driver->irq) {
2335
2336 /* IRQF_DISABLED doesn't work as advertised when used together
2337 * with IRQF_SHARED. As usb_hcd_irq() will always disable
2338 * interrupts we can remove it here.
2339 */
2340 if (irqflags & IRQF_SHARED)
2341 irqflags &= ~IRQF_DISABLED;
2342
2343 snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
2344 hcd->driver->description, hcd->self.busnum);
2345 retval = request_irq(irqnum, &usb_hcd_irq, irqflags,
2346 hcd->irq_descr, hcd);
2347 if (retval != 0) {
2348 dev_err(hcd->self.controller,
2349 "request interrupt %d failed\n",
2350 irqnum);
2351 return retval;
2352 }
2353 hcd->irq = irqnum;
2354 dev_info(hcd->self.controller, "irq %d, %s 0x%08llx\n", irqnum,
2355 (hcd->driver->flags & HCD_MEMORY) ?
2356 "io mem" : "io base",
2357 (unsigned long long)hcd->rsrc_start);
2358 } else {
2359 hcd->irq = -1;
2360 if (hcd->rsrc_start)
2361 dev_info(hcd->self.controller, "%s 0x%08llx\n",
2362 (hcd->driver->flags & HCD_MEMORY) ?
2363 "io mem" : "io base",
2364 (unsigned long long)hcd->rsrc_start);
2365 }
2366 return 0;
2367}
2368
2369/**
2370 * usb_add_hcd - finish generic HCD structure initialization and register
2371 * @hcd: the usb_hcd structure to initialize
2372 * @irqnum: Interrupt line to allocate
2373 * @irqflags: Interrupt type flags
2374 *
2375 * Finish the remaining parts of generic HCD initialization: allocate the
2376 * buffers of consistent memory, register the bus, request the IRQ line,
2377 * and call the driver's reset() and start() routines.
2378 */
2379int usb_add_hcd(struct usb_hcd *hcd,
2380 unsigned int irqnum, unsigned long irqflags)
2381{
2382 int retval;
2383 struct usb_device *rhdev;
2384
2385 dev_info(hcd->self.controller, "%s\n", hcd->product_desc);
2386
2387 /* Keep old behaviour if authorized_default is not in [0, 1]. */
2388 if (authorized_default < 0 || authorized_default > 1)
2389 hcd->authorized_default = hcd->wireless? 0 : 1;
2390 else
2391 hcd->authorized_default = authorized_default;
2392 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
2393
2394 /* HC is in reset state, but accessible. Now do the one-time init,
2395 * bottom up so that hcds can customize the root hubs before khubd
2396 * starts talking to them. (Note, bus id is assigned early too.)
2397 */
2398 if ((retval = hcd_buffer_create(hcd)) != 0) {
2399 dev_dbg(hcd->self.controller, "pool alloc failed\n");
2400 return retval;
2401 }
2402
2403 if ((retval = usb_register_bus(&hcd->self)) < 0)
2404 goto err_register_bus;
2405
2406 if ((rhdev = usb_alloc_dev(NULL, &hcd->self, 0)) == NULL) {
2407 dev_err(hcd->self.controller, "unable to allocate root hub\n");
2408 retval = -ENOMEM;
2409 goto err_allocate_root_hub;
2410 }
2411 hcd->self.root_hub = rhdev;
2412
2413 switch (hcd->speed) {
2414 case HCD_USB11:
2415 rhdev->speed = USB_SPEED_FULL;
2416 break;
2417 case HCD_USB2:
2418 rhdev->speed = USB_SPEED_HIGH;
2419 break;
2420 case HCD_USB3:
2421 rhdev->speed = USB_SPEED_SUPER;
2422 break;
2423 default:
2424 retval = -EINVAL;
2425 goto err_set_rh_speed;
2426 }
2427
2428 /* wakeup flag init defaults to "everything works" for root hubs,
2429 * but drivers can override it in reset() if needed, along with
2430 * recording the overall controller's system wakeup capability.
2431 */
2432 device_init_wakeup(&rhdev->dev, 1);
2433
2434 /* HCD_FLAG_RH_RUNNING doesn't matter until the root hub is
2435 * registered. But since the controller can die at any time,
2436 * let's initialize the flag before touching the hardware.
2437 */
2438 set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2439
2440 /* "reset" is misnamed; its role is now one-time init. the controller
2441 * should already have been reset (and boot firmware kicked off etc).
2442 */
2443 if (hcd->driver->reset && (retval = hcd->driver->reset(hcd)) < 0) {
2444 dev_err(hcd->self.controller, "can't setup\n");
2445 goto err_hcd_driver_setup;
2446 }
2447 hcd->rh_pollable = 1;
2448
2449 /* NOTE: root hub and controller capabilities may not be the same */
2450 if (device_can_wakeup(hcd->self.controller)
2451 && device_can_wakeup(&hcd->self.root_hub->dev))
2452 dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
2453
2454 /* enable irqs just before we start the controller */
2455 if (usb_hcd_is_primary_hcd(hcd)) {
2456 retval = usb_hcd_request_irqs(hcd, irqnum, irqflags);
2457 if (retval)
2458 goto err_request_irq;
2459 }
2460
2461 hcd->state = HC_STATE_RUNNING;
2462 retval = hcd->driver->start(hcd);
2463 if (retval < 0) {
2464 dev_err(hcd->self.controller, "startup error %d\n", retval);
2465 goto err_hcd_driver_start;
2466 }
2467
2468 /* starting here, usbcore will pay attention to this root hub */
2469 rhdev->bus_mA = min(500u, hcd->power_budget);
2470 if ((retval = register_root_hub(hcd)) != 0)
2471 goto err_register_root_hub;
2472
2473 retval = sysfs_create_group(&rhdev->dev.kobj, &usb_bus_attr_group);
2474 if (retval < 0) {
2475 printk(KERN_ERR "Cannot register USB bus sysfs attributes: %d\n",
2476 retval);
2477 goto error_create_attr_group;
2478 }
2479 if (hcd->uses_new_polling && HCD_POLL_RH(hcd))
2480 usb_hcd_poll_rh_status(hcd);
2481 return retval;
2482
2483error_create_attr_group:
2484 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2485 if (HC_IS_RUNNING(hcd->state))
2486 hcd->state = HC_STATE_QUIESCING;
2487 spin_lock_irq(&hcd_root_hub_lock);
2488 hcd->rh_registered = 0;
2489 spin_unlock_irq(&hcd_root_hub_lock);
2490
2491#ifdef CONFIG_USB_SUSPEND
2492 cancel_work_sync(&hcd->wakeup_work);
2493#endif
2494 mutex_lock(&usb_bus_list_lock);
2495 usb_disconnect(&rhdev); /* Sets rhdev to NULL */
2496 mutex_unlock(&usb_bus_list_lock);
2497err_register_root_hub:
2498 hcd->rh_pollable = 0;
2499 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2500 del_timer_sync(&hcd->rh_timer);
2501 hcd->driver->stop(hcd);
2502 hcd->state = HC_STATE_HALT;
2503 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2504 del_timer_sync(&hcd->rh_timer);
2505err_hcd_driver_start:
2506 if (usb_hcd_is_primary_hcd(hcd) && hcd->irq >= 0)
2507 free_irq(irqnum, hcd);
2508err_request_irq:
2509err_hcd_driver_setup:
2510err_set_rh_speed:
2511 usb_put_dev(hcd->self.root_hub);
2512err_allocate_root_hub:
2513 usb_deregister_bus(&hcd->self);
2514err_register_bus:
2515 hcd_buffer_destroy(hcd);
2516 return retval;
2517}
2518EXPORT_SYMBOL_GPL(usb_add_hcd);
2519
2520/**
2521 * usb_remove_hcd - shutdown processing for generic HCDs
2522 * @hcd: the usb_hcd structure to remove
2523 * Context: !in_interrupt()
2524 *
2525 * Disconnects the root hub, then reverses the effects of usb_add_hcd(),
2526 * invoking the HCD's stop() method.
2527 */
2528void usb_remove_hcd(struct usb_hcd *hcd)
2529{
2530 struct usb_device *rhdev = hcd->self.root_hub;
2531
2532 dev_info(hcd->self.controller, "remove, state %x\n", hcd->state);
2533
2534 usb_get_dev(rhdev);
2535 sysfs_remove_group(&rhdev->dev.kobj, &usb_bus_attr_group);
2536
2537 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2538 if (HC_IS_RUNNING (hcd->state))
2539 hcd->state = HC_STATE_QUIESCING;
2540
2541 dev_dbg(hcd->self.controller, "roothub graceful disconnect\n");
2542 spin_lock_irq (&hcd_root_hub_lock);
2543 hcd->rh_registered = 0;
2544 spin_unlock_irq (&hcd_root_hub_lock);
2545
2546#ifdef CONFIG_USB_SUSPEND
2547 cancel_work_sync(&hcd->wakeup_work);
2548#endif
2549
2550 mutex_lock(&usb_bus_list_lock);
2551 usb_disconnect(&rhdev); /* Sets rhdev to NULL */
2552 mutex_unlock(&usb_bus_list_lock);
2553
2554 /* Prevent any more root-hub status calls from the timer.
2555 * The HCD might still restart the timer (if a port status change
2556 * interrupt occurs), but usb_hcd_poll_rh_status() won't invoke
2557 * the hub_status_data() callback.
2558 */
2559 hcd->rh_pollable = 0;
2560 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2561 del_timer_sync(&hcd->rh_timer);
2562
2563 hcd->driver->stop(hcd);
2564 hcd->state = HC_STATE_HALT;
2565
2566 /* In case the HCD restarted the timer, stop it again. */
2567 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2568 del_timer_sync(&hcd->rh_timer);
2569
2570 if (usb_hcd_is_primary_hcd(hcd)) {
2571 if (hcd->irq >= 0)
2572 free_irq(hcd->irq, hcd);
2573 }
2574
2575 usb_put_dev(hcd->self.root_hub);
2576 usb_deregister_bus(&hcd->self);
2577 hcd_buffer_destroy(hcd);
2578}
2579EXPORT_SYMBOL_GPL(usb_remove_hcd);
2580
2581void
2582usb_hcd_platform_shutdown(struct platform_device* dev)
2583{
2584 struct usb_hcd *hcd = platform_get_drvdata(dev);
2585
2586 if (hcd->driver->shutdown)
2587 hcd->driver->shutdown(hcd);
2588}
2589EXPORT_SYMBOL_GPL(usb_hcd_platform_shutdown);
2590
2591/*-------------------------------------------------------------------------*/
2592
2593#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
2594
2595struct usb_mon_operations *mon_ops;
2596
2597/*
2598 * The registration is unlocked.
2599 * We do it this way because we do not want to lock in hot paths.
2600 *
2601 * Notice that the code is minimally error-proof. Because usbmon needs
2602 * symbols from usbcore, usbcore gets referenced and cannot be unloaded first.
2603 */
2604
2605int usb_mon_register (struct usb_mon_operations *ops)
2606{
2607
2608 if (mon_ops)
2609 return -EBUSY;
2610
2611 mon_ops = ops;
2612 mb();
2613 return 0;
2614}
2615EXPORT_SYMBOL_GPL (usb_mon_register);
2616
2617void usb_mon_deregister (void)
2618{
2619
2620 if (mon_ops == NULL) {
2621 printk(KERN_ERR "USB: monitor was not registered\n");
2622 return;
2623 }
2624 mon_ops = NULL;
2625 mb();
2626}
2627EXPORT_SYMBOL_GPL (usb_mon_deregister);
2628
2629#endif /* CONFIG_USB_MON || CONFIG_USB_MON_MODULE */
1/*
2 * (C) Copyright Linus Torvalds 1999
3 * (C) Copyright Johannes Erdfelt 1999-2001
4 * (C) Copyright Andreas Gal 1999
5 * (C) Copyright Gregory P. Smith 1999
6 * (C) Copyright Deti Fliegl 1999
7 * (C) Copyright Randy Dunlap 2000
8 * (C) Copyright David Brownell 2000-2002
9 *
10 * This program is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by the
12 * Free Software Foundation; either version 2 of the License, or (at your
13 * option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful, but
16 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
17 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
18 * for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software Foundation,
22 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 */
24
25#include <linux/bcd.h>
26#include <linux/module.h>
27#include <linux/version.h>
28#include <linux/kernel.h>
29#include <linux/slab.h>
30#include <linux/completion.h>
31#include <linux/utsname.h>
32#include <linux/mm.h>
33#include <asm/io.h>
34#include <linux/device.h>
35#include <linux/dma-mapping.h>
36#include <linux/mutex.h>
37#include <asm/irq.h>
38#include <asm/byteorder.h>
39#include <asm/unaligned.h>
40#include <linux/platform_device.h>
41#include <linux/workqueue.h>
42#include <linux/pm_runtime.h>
43#include <linux/types.h>
44
45#include <linux/phy/phy.h>
46#include <linux/usb.h>
47#include <linux/usb/hcd.h>
48#include <linux/usb/phy.h>
49#include <linux/usb/otg.h>
50
51#include "usb.h"
52
53
54/*-------------------------------------------------------------------------*/
55
56/*
57 * USB Host Controller Driver framework
58 *
59 * Plugs into usbcore (usb_bus) and lets HCDs share code, minimizing
60 * HCD-specific behaviors/bugs.
61 *
62 * This does error checks, tracks devices and urbs, and delegates to a
63 * "hc_driver" only for code (and data) that really needs to know about
64 * hardware differences. That includes root hub registers, i/o queues,
65 * and so on ... but as little else as possible.
66 *
67 * Shared code includes most of the "root hub" code (these are emulated,
68 * though each HC's hardware works differently) and PCI glue, plus request
69 * tracking overhead. The HCD code should only block on spinlocks or on
70 * hardware handshaking; blocking on software events (such as other kernel
71 * threads releasing resources, or completing actions) is all generic.
72 *
73 * Happens the USB 2.0 spec says this would be invisible inside the "USBD",
74 * and includes mostly a "HCDI" (HCD Interface) along with some APIs used
75 * only by the hub driver ... and that neither should be seen or used by
76 * usb client device drivers.
77 *
78 * Contributors of ideas or unattributed patches include: David Brownell,
79 * Roman Weissgaerber, Rory Bolt, Greg Kroah-Hartman, ...
80 *
81 * HISTORY:
82 * 2002-02-21 Pull in most of the usb_bus support from usb.c; some
83 * associated cleanup. "usb_hcd" still != "usb_bus".
84 * 2001-12-12 Initial patch version for Linux 2.5.1 kernel.
85 */
86
87/*-------------------------------------------------------------------------*/
88
89/* Keep track of which host controller drivers are loaded */
90unsigned long usb_hcds_loaded;
91EXPORT_SYMBOL_GPL(usb_hcds_loaded);
92
93/* host controllers we manage */
94DEFINE_IDR (usb_bus_idr);
95EXPORT_SYMBOL_GPL (usb_bus_idr);
96
97/* used when allocating bus numbers */
98#define USB_MAXBUS 64
99
100/* used when updating list of hcds */
101DEFINE_MUTEX(usb_bus_idr_lock); /* exported only for usbfs */
102EXPORT_SYMBOL_GPL (usb_bus_idr_lock);
103
104/* used for controlling access to virtual root hubs */
105static DEFINE_SPINLOCK(hcd_root_hub_lock);
106
107/* used when updating an endpoint's URB list */
108static DEFINE_SPINLOCK(hcd_urb_list_lock);
109
110/* used to protect against unlinking URBs after the device is gone */
111static DEFINE_SPINLOCK(hcd_urb_unlink_lock);
112
113/* wait queue for synchronous unlinks */
114DECLARE_WAIT_QUEUE_HEAD(usb_kill_urb_queue);
115
116static inline int is_root_hub(struct usb_device *udev)
117{
118 return (udev->parent == NULL);
119}
120
121/*-------------------------------------------------------------------------*/
122
123/*
124 * Sharable chunks of root hub code.
125 */
126
127/*-------------------------------------------------------------------------*/
128#define KERNEL_REL bin2bcd(((LINUX_VERSION_CODE >> 16) & 0x0ff))
129#define KERNEL_VER bin2bcd(((LINUX_VERSION_CODE >> 8) & 0x0ff))
130
131/* usb 3.1 root hub device descriptor */
132static const u8 usb31_rh_dev_descriptor[18] = {
133 0x12, /* __u8 bLength; */
134 USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
135 0x10, 0x03, /* __le16 bcdUSB; v3.1 */
136
137 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
138 0x00, /* __u8 bDeviceSubClass; */
139 0x03, /* __u8 bDeviceProtocol; USB 3 hub */
140 0x09, /* __u8 bMaxPacketSize0; 2^9 = 512 Bytes */
141
142 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
143 0x03, 0x00, /* __le16 idProduct; device 0x0003 */
144 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
145
146 0x03, /* __u8 iManufacturer; */
147 0x02, /* __u8 iProduct; */
148 0x01, /* __u8 iSerialNumber; */
149 0x01 /* __u8 bNumConfigurations; */
150};
151
152/* usb 3.0 root hub device descriptor */
153static const u8 usb3_rh_dev_descriptor[18] = {
154 0x12, /* __u8 bLength; */
155 USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
156 0x00, 0x03, /* __le16 bcdUSB; v3.0 */
157
158 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
159 0x00, /* __u8 bDeviceSubClass; */
160 0x03, /* __u8 bDeviceProtocol; USB 3.0 hub */
161 0x09, /* __u8 bMaxPacketSize0; 2^9 = 512 Bytes */
162
163 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
164 0x03, 0x00, /* __le16 idProduct; device 0x0003 */
165 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
166
167 0x03, /* __u8 iManufacturer; */
168 0x02, /* __u8 iProduct; */
169 0x01, /* __u8 iSerialNumber; */
170 0x01 /* __u8 bNumConfigurations; */
171};
172
173/* usb 2.5 (wireless USB 1.0) root hub device descriptor */
174static const u8 usb25_rh_dev_descriptor[18] = {
175 0x12, /* __u8 bLength; */
176 USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
177 0x50, 0x02, /* __le16 bcdUSB; v2.5 */
178
179 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
180 0x00, /* __u8 bDeviceSubClass; */
181 0x00, /* __u8 bDeviceProtocol; [ usb 2.0 no TT ] */
182 0xFF, /* __u8 bMaxPacketSize0; always 0xFF (WUSB Spec 7.4.1). */
183
184 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
185 0x02, 0x00, /* __le16 idProduct; device 0x0002 */
186 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
187
188 0x03, /* __u8 iManufacturer; */
189 0x02, /* __u8 iProduct; */
190 0x01, /* __u8 iSerialNumber; */
191 0x01 /* __u8 bNumConfigurations; */
192};
193
194/* usb 2.0 root hub device descriptor */
195static const u8 usb2_rh_dev_descriptor[18] = {
196 0x12, /* __u8 bLength; */
197 USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
198 0x00, 0x02, /* __le16 bcdUSB; v2.0 */
199
200 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
201 0x00, /* __u8 bDeviceSubClass; */
202 0x00, /* __u8 bDeviceProtocol; [ usb 2.0 no TT ] */
203 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
204
205 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
206 0x02, 0x00, /* __le16 idProduct; device 0x0002 */
207 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
208
209 0x03, /* __u8 iManufacturer; */
210 0x02, /* __u8 iProduct; */
211 0x01, /* __u8 iSerialNumber; */
212 0x01 /* __u8 bNumConfigurations; */
213};
214
215/* no usb 2.0 root hub "device qualifier" descriptor: one speed only */
216
217/* usb 1.1 root hub device descriptor */
218static const u8 usb11_rh_dev_descriptor[18] = {
219 0x12, /* __u8 bLength; */
220 USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
221 0x10, 0x01, /* __le16 bcdUSB; v1.1 */
222
223 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
224 0x00, /* __u8 bDeviceSubClass; */
225 0x00, /* __u8 bDeviceProtocol; [ low/full speeds only ] */
226 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
227
228 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
229 0x01, 0x00, /* __le16 idProduct; device 0x0001 */
230 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
231
232 0x03, /* __u8 iManufacturer; */
233 0x02, /* __u8 iProduct; */
234 0x01, /* __u8 iSerialNumber; */
235 0x01 /* __u8 bNumConfigurations; */
236};
237
238
239/*-------------------------------------------------------------------------*/
240
241/* Configuration descriptors for our root hubs */
242
243static const u8 fs_rh_config_descriptor[] = {
244
245 /* one configuration */
246 0x09, /* __u8 bLength; */
247 USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
248 0x19, 0x00, /* __le16 wTotalLength; */
249 0x01, /* __u8 bNumInterfaces; (1) */
250 0x01, /* __u8 bConfigurationValue; */
251 0x00, /* __u8 iConfiguration; */
252 0xc0, /* __u8 bmAttributes;
253 Bit 7: must be set,
254 6: Self-powered,
255 5: Remote wakeup,
256 4..0: resvd */
257 0x00, /* __u8 MaxPower; */
258
259 /* USB 1.1:
260 * USB 2.0, single TT organization (mandatory):
261 * one interface, protocol 0
262 *
263 * USB 2.0, multiple TT organization (optional):
264 * two interfaces, protocols 1 (like single TT)
265 * and 2 (multiple TT mode) ... config is
266 * sometimes settable
267 * NOT IMPLEMENTED
268 */
269
270 /* one interface */
271 0x09, /* __u8 if_bLength; */
272 USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */
273 0x00, /* __u8 if_bInterfaceNumber; */
274 0x00, /* __u8 if_bAlternateSetting; */
275 0x01, /* __u8 if_bNumEndpoints; */
276 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
277 0x00, /* __u8 if_bInterfaceSubClass; */
278 0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */
279 0x00, /* __u8 if_iInterface; */
280
281 /* one endpoint (status change endpoint) */
282 0x07, /* __u8 ep_bLength; */
283 USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
284 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
285 0x03, /* __u8 ep_bmAttributes; Interrupt */
286 0x02, 0x00, /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */
287 0xff /* __u8 ep_bInterval; (255ms -- usb 2.0 spec) */
288};
289
290static const u8 hs_rh_config_descriptor[] = {
291
292 /* one configuration */
293 0x09, /* __u8 bLength; */
294 USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
295 0x19, 0x00, /* __le16 wTotalLength; */
296 0x01, /* __u8 bNumInterfaces; (1) */
297 0x01, /* __u8 bConfigurationValue; */
298 0x00, /* __u8 iConfiguration; */
299 0xc0, /* __u8 bmAttributes;
300 Bit 7: must be set,
301 6: Self-powered,
302 5: Remote wakeup,
303 4..0: resvd */
304 0x00, /* __u8 MaxPower; */
305
306 /* USB 1.1:
307 * USB 2.0, single TT organization (mandatory):
308 * one interface, protocol 0
309 *
310 * USB 2.0, multiple TT organization (optional):
311 * two interfaces, protocols 1 (like single TT)
312 * and 2 (multiple TT mode) ... config is
313 * sometimes settable
314 * NOT IMPLEMENTED
315 */
316
317 /* one interface */
318 0x09, /* __u8 if_bLength; */
319 USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */
320 0x00, /* __u8 if_bInterfaceNumber; */
321 0x00, /* __u8 if_bAlternateSetting; */
322 0x01, /* __u8 if_bNumEndpoints; */
323 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
324 0x00, /* __u8 if_bInterfaceSubClass; */
325 0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */
326 0x00, /* __u8 if_iInterface; */
327
328 /* one endpoint (status change endpoint) */
329 0x07, /* __u8 ep_bLength; */
330 USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
331 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
332 0x03, /* __u8 ep_bmAttributes; Interrupt */
333 /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
334 * see hub.c:hub_configure() for details. */
335 (USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
336 0x0c /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */
337};
338
339static const u8 ss_rh_config_descriptor[] = {
340 /* one configuration */
341 0x09, /* __u8 bLength; */
342 USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
343 0x1f, 0x00, /* __le16 wTotalLength; */
344 0x01, /* __u8 bNumInterfaces; (1) */
345 0x01, /* __u8 bConfigurationValue; */
346 0x00, /* __u8 iConfiguration; */
347 0xc0, /* __u8 bmAttributes;
348 Bit 7: must be set,
349 6: Self-powered,
350 5: Remote wakeup,
351 4..0: resvd */
352 0x00, /* __u8 MaxPower; */
353
354 /* one interface */
355 0x09, /* __u8 if_bLength; */
356 USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */
357 0x00, /* __u8 if_bInterfaceNumber; */
358 0x00, /* __u8 if_bAlternateSetting; */
359 0x01, /* __u8 if_bNumEndpoints; */
360 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
361 0x00, /* __u8 if_bInterfaceSubClass; */
362 0x00, /* __u8 if_bInterfaceProtocol; */
363 0x00, /* __u8 if_iInterface; */
364
365 /* one endpoint (status change endpoint) */
366 0x07, /* __u8 ep_bLength; */
367 USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
368 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
369 0x03, /* __u8 ep_bmAttributes; Interrupt */
370 /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
371 * see hub.c:hub_configure() for details. */
372 (USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
373 0x0c, /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */
374
375 /* one SuperSpeed endpoint companion descriptor */
376 0x06, /* __u8 ss_bLength */
377 USB_DT_SS_ENDPOINT_COMP, /* __u8 ss_bDescriptorType; SuperSpeed EP */
378 /* Companion */
379 0x00, /* __u8 ss_bMaxBurst; allows 1 TX between ACKs */
380 0x00, /* __u8 ss_bmAttributes; 1 packet per service interval */
381 0x02, 0x00 /* __le16 ss_wBytesPerInterval; 15 bits for max 15 ports */
382};
383
384/* authorized_default behaviour:
385 * -1 is authorized for all devices except wireless (old behaviour)
386 * 0 is unauthorized for all devices
387 * 1 is authorized for all devices
388 */
389static int authorized_default = -1;
390module_param(authorized_default, int, S_IRUGO|S_IWUSR);
391MODULE_PARM_DESC(authorized_default,
392 "Default USB device authorization: 0 is not authorized, 1 is "
393 "authorized, -1 is authorized except for wireless USB (default, "
394 "old behaviour");
395/*-------------------------------------------------------------------------*/
396
397/**
398 * ascii2desc() - Helper routine for producing UTF-16LE string descriptors
399 * @s: Null-terminated ASCII (actually ISO-8859-1) string
400 * @buf: Buffer for USB string descriptor (header + UTF-16LE)
401 * @len: Length (in bytes; may be odd) of descriptor buffer.
402 *
403 * Return: The number of bytes filled in: 2 + 2*strlen(s) or @len,
404 * whichever is less.
405 *
406 * Note:
407 * USB String descriptors can contain at most 126 characters; input
408 * strings longer than that are truncated.
409 */
410static unsigned
411ascii2desc(char const *s, u8 *buf, unsigned len)
412{
413 unsigned n, t = 2 + 2*strlen(s);
414
415 if (t > 254)
416 t = 254; /* Longest possible UTF string descriptor */
417 if (len > t)
418 len = t;
419
420 t += USB_DT_STRING << 8; /* Now t is first 16 bits to store */
421
422 n = len;
423 while (n--) {
424 *buf++ = t;
425 if (!n--)
426 break;
427 *buf++ = t >> 8;
428 t = (unsigned char)*s++;
429 }
430 return len;
431}
432
433/**
434 * rh_string() - provides string descriptors for root hub
435 * @id: the string ID number (0: langids, 1: serial #, 2: product, 3: vendor)
436 * @hcd: the host controller for this root hub
437 * @data: buffer for output packet
438 * @len: length of the provided buffer
439 *
440 * Produces either a manufacturer, product or serial number string for the
441 * virtual root hub device.
442 *
443 * Return: The number of bytes filled in: the length of the descriptor or
444 * of the provided buffer, whichever is less.
445 */
446static unsigned
447rh_string(int id, struct usb_hcd const *hcd, u8 *data, unsigned len)
448{
449 char buf[100];
450 char const *s;
451 static char const langids[4] = {4, USB_DT_STRING, 0x09, 0x04};
452
453 /* language ids */
454 switch (id) {
455 case 0:
456 /* Array of LANGID codes (0x0409 is MSFT-speak for "en-us") */
457 /* See http://www.usb.org/developers/docs/USB_LANGIDs.pdf */
458 if (len > 4)
459 len = 4;
460 memcpy(data, langids, len);
461 return len;
462 case 1:
463 /* Serial number */
464 s = hcd->self.bus_name;
465 break;
466 case 2:
467 /* Product name */
468 s = hcd->product_desc;
469 break;
470 case 3:
471 /* Manufacturer */
472 snprintf (buf, sizeof buf, "%s %s %s", init_utsname()->sysname,
473 init_utsname()->release, hcd->driver->description);
474 s = buf;
475 break;
476 default:
477 /* Can't happen; caller guarantees it */
478 return 0;
479 }
480
481 return ascii2desc(s, data, len);
482}
483
484
485/* Root hub control transfers execute synchronously */
486static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
487{
488 struct usb_ctrlrequest *cmd;
489 u16 typeReq, wValue, wIndex, wLength;
490 u8 *ubuf = urb->transfer_buffer;
491 unsigned len = 0;
492 int status;
493 u8 patch_wakeup = 0;
494 u8 patch_protocol = 0;
495 u16 tbuf_size;
496 u8 *tbuf = NULL;
497 const u8 *bufp;
498
499 might_sleep();
500
501 spin_lock_irq(&hcd_root_hub_lock);
502 status = usb_hcd_link_urb_to_ep(hcd, urb);
503 spin_unlock_irq(&hcd_root_hub_lock);
504 if (status)
505 return status;
506 urb->hcpriv = hcd; /* Indicate it's queued */
507
508 cmd = (struct usb_ctrlrequest *) urb->setup_packet;
509 typeReq = (cmd->bRequestType << 8) | cmd->bRequest;
510 wValue = le16_to_cpu (cmd->wValue);
511 wIndex = le16_to_cpu (cmd->wIndex);
512 wLength = le16_to_cpu (cmd->wLength);
513
514 if (wLength > urb->transfer_buffer_length)
515 goto error;
516
517 /*
518 * tbuf should be at least as big as the
519 * USB hub descriptor.
520 */
521 tbuf_size = max_t(u16, sizeof(struct usb_hub_descriptor), wLength);
522 tbuf = kzalloc(tbuf_size, GFP_KERNEL);
523 if (!tbuf) {
524 status = -ENOMEM;
525 goto err_alloc;
526 }
527
528 bufp = tbuf;
529
530
531 urb->actual_length = 0;
532 switch (typeReq) {
533
534 /* DEVICE REQUESTS */
535
536 /* The root hub's remote wakeup enable bit is implemented using
537 * driver model wakeup flags. If this system supports wakeup
538 * through USB, userspace may change the default "allow wakeup"
539 * policy through sysfs or these calls.
540 *
541 * Most root hubs support wakeup from downstream devices, for
542 * runtime power management (disabling USB clocks and reducing
543 * VBUS power usage). However, not all of them do so; silicon,
544 * board, and BIOS bugs here are not uncommon, so these can't
545 * be treated quite like external hubs.
546 *
547 * Likewise, not all root hubs will pass wakeup events upstream,
548 * to wake up the whole system. So don't assume root hub and
549 * controller capabilities are identical.
550 */
551
552 case DeviceRequest | USB_REQ_GET_STATUS:
553 tbuf[0] = (device_may_wakeup(&hcd->self.root_hub->dev)
554 << USB_DEVICE_REMOTE_WAKEUP)
555 | (1 << USB_DEVICE_SELF_POWERED);
556 tbuf[1] = 0;
557 len = 2;
558 break;
559 case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
560 if (wValue == USB_DEVICE_REMOTE_WAKEUP)
561 device_set_wakeup_enable(&hcd->self.root_hub->dev, 0);
562 else
563 goto error;
564 break;
565 case DeviceOutRequest | USB_REQ_SET_FEATURE:
566 if (device_can_wakeup(&hcd->self.root_hub->dev)
567 && wValue == USB_DEVICE_REMOTE_WAKEUP)
568 device_set_wakeup_enable(&hcd->self.root_hub->dev, 1);
569 else
570 goto error;
571 break;
572 case DeviceRequest | USB_REQ_GET_CONFIGURATION:
573 tbuf[0] = 1;
574 len = 1;
575 /* FALLTHROUGH */
576 case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
577 break;
578 case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
579 switch (wValue & 0xff00) {
580 case USB_DT_DEVICE << 8:
581 switch (hcd->speed) {
582 case HCD_USB31:
583 bufp = usb31_rh_dev_descriptor;
584 break;
585 case HCD_USB3:
586 bufp = usb3_rh_dev_descriptor;
587 break;
588 case HCD_USB25:
589 bufp = usb25_rh_dev_descriptor;
590 break;
591 case HCD_USB2:
592 bufp = usb2_rh_dev_descriptor;
593 break;
594 case HCD_USB11:
595 bufp = usb11_rh_dev_descriptor;
596 break;
597 default:
598 goto error;
599 }
600 len = 18;
601 if (hcd->has_tt)
602 patch_protocol = 1;
603 break;
604 case USB_DT_CONFIG << 8:
605 switch (hcd->speed) {
606 case HCD_USB31:
607 case HCD_USB3:
608 bufp = ss_rh_config_descriptor;
609 len = sizeof ss_rh_config_descriptor;
610 break;
611 case HCD_USB25:
612 case HCD_USB2:
613 bufp = hs_rh_config_descriptor;
614 len = sizeof hs_rh_config_descriptor;
615 break;
616 case HCD_USB11:
617 bufp = fs_rh_config_descriptor;
618 len = sizeof fs_rh_config_descriptor;
619 break;
620 default:
621 goto error;
622 }
623 if (device_can_wakeup(&hcd->self.root_hub->dev))
624 patch_wakeup = 1;
625 break;
626 case USB_DT_STRING << 8:
627 if ((wValue & 0xff) < 4)
628 urb->actual_length = rh_string(wValue & 0xff,
629 hcd, ubuf, wLength);
630 else /* unsupported IDs --> "protocol stall" */
631 goto error;
632 break;
633 case USB_DT_BOS << 8:
634 goto nongeneric;
635 default:
636 goto error;
637 }
638 break;
639 case DeviceRequest | USB_REQ_GET_INTERFACE:
640 tbuf[0] = 0;
641 len = 1;
642 /* FALLTHROUGH */
643 case DeviceOutRequest | USB_REQ_SET_INTERFACE:
644 break;
645 case DeviceOutRequest | USB_REQ_SET_ADDRESS:
646 /* wValue == urb->dev->devaddr */
647 dev_dbg (hcd->self.controller, "root hub device address %d\n",
648 wValue);
649 break;
650
651 /* INTERFACE REQUESTS (no defined feature/status flags) */
652
653 /* ENDPOINT REQUESTS */
654
655 case EndpointRequest | USB_REQ_GET_STATUS:
656 /* ENDPOINT_HALT flag */
657 tbuf[0] = 0;
658 tbuf[1] = 0;
659 len = 2;
660 /* FALLTHROUGH */
661 case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
662 case EndpointOutRequest | USB_REQ_SET_FEATURE:
663 dev_dbg (hcd->self.controller, "no endpoint features yet\n");
664 break;
665
666 /* CLASS REQUESTS (and errors) */
667
668 default:
669nongeneric:
670 /* non-generic request */
671 switch (typeReq) {
672 case GetHubStatus:
673 len = 4;
674 break;
675 case GetPortStatus:
676 if (wValue == HUB_PORT_STATUS)
677 len = 4;
678 else
679 /* other port status types return 8 bytes */
680 len = 8;
681 break;
682 case GetHubDescriptor:
683 len = sizeof (struct usb_hub_descriptor);
684 break;
685 case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
686 /* len is returned by hub_control */
687 break;
688 }
689 status = hcd->driver->hub_control (hcd,
690 typeReq, wValue, wIndex,
691 tbuf, wLength);
692
693 if (typeReq == GetHubDescriptor)
694 usb_hub_adjust_deviceremovable(hcd->self.root_hub,
695 (struct usb_hub_descriptor *)tbuf);
696 break;
697error:
698 /* "protocol stall" on error */
699 status = -EPIPE;
700 }
701
702 if (status < 0) {
703 len = 0;
704 if (status != -EPIPE) {
705 dev_dbg (hcd->self.controller,
706 "CTRL: TypeReq=0x%x val=0x%x "
707 "idx=0x%x len=%d ==> %d\n",
708 typeReq, wValue, wIndex,
709 wLength, status);
710 }
711 } else if (status > 0) {
712 /* hub_control may return the length of data copied. */
713 len = status;
714 status = 0;
715 }
716 if (len) {
717 if (urb->transfer_buffer_length < len)
718 len = urb->transfer_buffer_length;
719 urb->actual_length = len;
720 /* always USB_DIR_IN, toward host */
721 memcpy (ubuf, bufp, len);
722
723 /* report whether RH hardware supports remote wakeup */
724 if (patch_wakeup &&
725 len > offsetof (struct usb_config_descriptor,
726 bmAttributes))
727 ((struct usb_config_descriptor *)ubuf)->bmAttributes
728 |= USB_CONFIG_ATT_WAKEUP;
729
730 /* report whether RH hardware has an integrated TT */
731 if (patch_protocol &&
732 len > offsetof(struct usb_device_descriptor,
733 bDeviceProtocol))
734 ((struct usb_device_descriptor *) ubuf)->
735 bDeviceProtocol = USB_HUB_PR_HS_SINGLE_TT;
736 }
737
738 kfree(tbuf);
739 err_alloc:
740
741 /* any errors get returned through the urb completion */
742 spin_lock_irq(&hcd_root_hub_lock);
743 usb_hcd_unlink_urb_from_ep(hcd, urb);
744 usb_hcd_giveback_urb(hcd, urb, status);
745 spin_unlock_irq(&hcd_root_hub_lock);
746 return 0;
747}
748
749/*-------------------------------------------------------------------------*/
750
751/*
752 * Root Hub interrupt transfers are polled using a timer if the
753 * driver requests it; otherwise the driver is responsible for
754 * calling usb_hcd_poll_rh_status() when an event occurs.
755 *
756 * Completions are called in_interrupt(), but they may or may not
757 * be in_irq().
758 */
759void usb_hcd_poll_rh_status(struct usb_hcd *hcd)
760{
761 struct urb *urb;
762 int length;
763 unsigned long flags;
764 char buffer[6]; /* Any root hubs with > 31 ports? */
765
766 if (unlikely(!hcd->rh_pollable))
767 return;
768 if (!hcd->uses_new_polling && !hcd->status_urb)
769 return;
770
771 length = hcd->driver->hub_status_data(hcd, buffer);
772 if (length > 0) {
773
774 /* try to complete the status urb */
775 spin_lock_irqsave(&hcd_root_hub_lock, flags);
776 urb = hcd->status_urb;
777 if (urb) {
778 clear_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);
779 hcd->status_urb = NULL;
780 urb->actual_length = length;
781 memcpy(urb->transfer_buffer, buffer, length);
782
783 usb_hcd_unlink_urb_from_ep(hcd, urb);
784 usb_hcd_giveback_urb(hcd, urb, 0);
785 } else {
786 length = 0;
787 set_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);
788 }
789 spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
790 }
791
792 /* The USB 2.0 spec says 256 ms. This is close enough and won't
793 * exceed that limit if HZ is 100. The math is more clunky than
794 * maybe expected, this is to make sure that all timers for USB devices
795 * fire at the same time to give the CPU a break in between */
796 if (hcd->uses_new_polling ? HCD_POLL_RH(hcd) :
797 (length == 0 && hcd->status_urb != NULL))
798 mod_timer (&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
799}
800EXPORT_SYMBOL_GPL(usb_hcd_poll_rh_status);
801
802/* timer callback */
803static void rh_timer_func (unsigned long _hcd)
804{
805 usb_hcd_poll_rh_status((struct usb_hcd *) _hcd);
806}
807
808/*-------------------------------------------------------------------------*/
809
810static int rh_queue_status (struct usb_hcd *hcd, struct urb *urb)
811{
812 int retval;
813 unsigned long flags;
814 unsigned len = 1 + (urb->dev->maxchild / 8);
815
816 spin_lock_irqsave (&hcd_root_hub_lock, flags);
817 if (hcd->status_urb || urb->transfer_buffer_length < len) {
818 dev_dbg (hcd->self.controller, "not queuing rh status urb\n");
819 retval = -EINVAL;
820 goto done;
821 }
822
823 retval = usb_hcd_link_urb_to_ep(hcd, urb);
824 if (retval)
825 goto done;
826
827 hcd->status_urb = urb;
828 urb->hcpriv = hcd; /* indicate it's queued */
829 if (!hcd->uses_new_polling)
830 mod_timer(&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
831
832 /* If a status change has already occurred, report it ASAP */
833 else if (HCD_POLL_PENDING(hcd))
834 mod_timer(&hcd->rh_timer, jiffies);
835 retval = 0;
836 done:
837 spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
838 return retval;
839}
840
841static int rh_urb_enqueue (struct usb_hcd *hcd, struct urb *urb)
842{
843 if (usb_endpoint_xfer_int(&urb->ep->desc))
844 return rh_queue_status (hcd, urb);
845 if (usb_endpoint_xfer_control(&urb->ep->desc))
846 return rh_call_control (hcd, urb);
847 return -EINVAL;
848}
849
850/*-------------------------------------------------------------------------*/
851
852/* Unlinks of root-hub control URBs are legal, but they don't do anything
853 * since these URBs always execute synchronously.
854 */
855static int usb_rh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
856{
857 unsigned long flags;
858 int rc;
859
860 spin_lock_irqsave(&hcd_root_hub_lock, flags);
861 rc = usb_hcd_check_unlink_urb(hcd, urb, status);
862 if (rc)
863 goto done;
864
865 if (usb_endpoint_num(&urb->ep->desc) == 0) { /* Control URB */
866 ; /* Do nothing */
867
868 } else { /* Status URB */
869 if (!hcd->uses_new_polling)
870 del_timer (&hcd->rh_timer);
871 if (urb == hcd->status_urb) {
872 hcd->status_urb = NULL;
873 usb_hcd_unlink_urb_from_ep(hcd, urb);
874 usb_hcd_giveback_urb(hcd, urb, status);
875 }
876 }
877 done:
878 spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
879 return rc;
880}
881
882
883
884/*
885 * Show & store the current value of authorized_default
886 */
887static ssize_t authorized_default_show(struct device *dev,
888 struct device_attribute *attr, char *buf)
889{
890 struct usb_device *rh_usb_dev = to_usb_device(dev);
891 struct usb_bus *usb_bus = rh_usb_dev->bus;
892 struct usb_hcd *hcd;
893
894 hcd = bus_to_hcd(usb_bus);
895 return snprintf(buf, PAGE_SIZE, "%u\n", !!HCD_DEV_AUTHORIZED(hcd));
896}
897
898static ssize_t authorized_default_store(struct device *dev,
899 struct device_attribute *attr,
900 const char *buf, size_t size)
901{
902 ssize_t result;
903 unsigned val;
904 struct usb_device *rh_usb_dev = to_usb_device(dev);
905 struct usb_bus *usb_bus = rh_usb_dev->bus;
906 struct usb_hcd *hcd;
907
908 hcd = bus_to_hcd(usb_bus);
909 result = sscanf(buf, "%u\n", &val);
910 if (result == 1) {
911 if (val)
912 set_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
913 else
914 clear_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
915
916 result = size;
917 } else {
918 result = -EINVAL;
919 }
920 return result;
921}
922static DEVICE_ATTR_RW(authorized_default);
923
924/*
925 * interface_authorized_default_show - show default authorization status
926 * for USB interfaces
927 *
928 * note: interface_authorized_default is the default value
929 * for initializing the authorized attribute of interfaces
930 */
931static ssize_t interface_authorized_default_show(struct device *dev,
932 struct device_attribute *attr, char *buf)
933{
934 struct usb_device *usb_dev = to_usb_device(dev);
935 struct usb_hcd *hcd = bus_to_hcd(usb_dev->bus);
936
937 return sprintf(buf, "%u\n", !!HCD_INTF_AUTHORIZED(hcd));
938}
939
940/*
941 * interface_authorized_default_store - store default authorization status
942 * for USB interfaces
943 *
944 * note: interface_authorized_default is the default value
945 * for initializing the authorized attribute of interfaces
946 */
947static ssize_t interface_authorized_default_store(struct device *dev,
948 struct device_attribute *attr, const char *buf, size_t count)
949{
950 struct usb_device *usb_dev = to_usb_device(dev);
951 struct usb_hcd *hcd = bus_to_hcd(usb_dev->bus);
952 int rc = count;
953 bool val;
954
955 if (strtobool(buf, &val) != 0)
956 return -EINVAL;
957
958 if (val)
959 set_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags);
960 else
961 clear_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags);
962
963 return rc;
964}
965static DEVICE_ATTR_RW(interface_authorized_default);
966
967/* Group all the USB bus attributes */
968static struct attribute *usb_bus_attrs[] = {
969 &dev_attr_authorized_default.attr,
970 &dev_attr_interface_authorized_default.attr,
971 NULL,
972};
973
974static struct attribute_group usb_bus_attr_group = {
975 .name = NULL, /* we want them in the same directory */
976 .attrs = usb_bus_attrs,
977};
978
979
980
981/*-------------------------------------------------------------------------*/
982
983/**
984 * usb_bus_init - shared initialization code
985 * @bus: the bus structure being initialized
986 *
987 * This code is used to initialize a usb_bus structure, memory for which is
988 * separately managed.
989 */
990static void usb_bus_init (struct usb_bus *bus)
991{
992 memset (&bus->devmap, 0, sizeof(struct usb_devmap));
993
994 bus->devnum_next = 1;
995
996 bus->root_hub = NULL;
997 bus->busnum = -1;
998 bus->bandwidth_allocated = 0;
999 bus->bandwidth_int_reqs = 0;
1000 bus->bandwidth_isoc_reqs = 0;
1001 mutex_init(&bus->devnum_next_mutex);
1002}
1003
1004/*-------------------------------------------------------------------------*/
1005
1006/**
1007 * usb_register_bus - registers the USB host controller with the usb core
1008 * @bus: pointer to the bus to register
1009 * Context: !in_interrupt()
1010 *
1011 * Assigns a bus number, and links the controller into usbcore data
1012 * structures so that it can be seen by scanning the bus list.
1013 *
1014 * Return: 0 if successful. A negative error code otherwise.
1015 */
1016static int usb_register_bus(struct usb_bus *bus)
1017{
1018 int result = -E2BIG;
1019 int busnum;
1020
1021 mutex_lock(&usb_bus_idr_lock);
1022 busnum = idr_alloc(&usb_bus_idr, bus, 1, USB_MAXBUS, GFP_KERNEL);
1023 if (busnum < 0) {
1024 pr_err("%s: failed to get bus number\n", usbcore_name);
1025 goto error_find_busnum;
1026 }
1027 bus->busnum = busnum;
1028 mutex_unlock(&usb_bus_idr_lock);
1029
1030 usb_notify_add_bus(bus);
1031
1032 dev_info (bus->controller, "new USB bus registered, assigned bus "
1033 "number %d\n", bus->busnum);
1034 return 0;
1035
1036error_find_busnum:
1037 mutex_unlock(&usb_bus_idr_lock);
1038 return result;
1039}
1040
1041/**
1042 * usb_deregister_bus - deregisters the USB host controller
1043 * @bus: pointer to the bus to deregister
1044 * Context: !in_interrupt()
1045 *
1046 * Recycles the bus number, and unlinks the controller from usbcore data
1047 * structures so that it won't be seen by scanning the bus list.
1048 */
1049static void usb_deregister_bus (struct usb_bus *bus)
1050{
1051 dev_info (bus->controller, "USB bus %d deregistered\n", bus->busnum);
1052
1053 /*
1054 * NOTE: make sure that all the devices are removed by the
1055 * controller code, as well as having it call this when cleaning
1056 * itself up
1057 */
1058 mutex_lock(&usb_bus_idr_lock);
1059 idr_remove(&usb_bus_idr, bus->busnum);
1060 mutex_unlock(&usb_bus_idr_lock);
1061
1062 usb_notify_remove_bus(bus);
1063}
1064
1065/**
1066 * register_root_hub - called by usb_add_hcd() to register a root hub
1067 * @hcd: host controller for this root hub
1068 *
1069 * This function registers the root hub with the USB subsystem. It sets up
1070 * the device properly in the device tree and then calls usb_new_device()
1071 * to register the usb device. It also assigns the root hub's USB address
1072 * (always 1).
1073 *
1074 * Return: 0 if successful. A negative error code otherwise.
1075 */
1076static int register_root_hub(struct usb_hcd *hcd)
1077{
1078 struct device *parent_dev = hcd->self.controller;
1079 struct usb_device *usb_dev = hcd->self.root_hub;
1080 const int devnum = 1;
1081 int retval;
1082
1083 usb_dev->devnum = devnum;
1084 usb_dev->bus->devnum_next = devnum + 1;
1085 memset (&usb_dev->bus->devmap.devicemap, 0,
1086 sizeof usb_dev->bus->devmap.devicemap);
1087 set_bit (devnum, usb_dev->bus->devmap.devicemap);
1088 usb_set_device_state(usb_dev, USB_STATE_ADDRESS);
1089
1090 mutex_lock(&usb_bus_idr_lock);
1091
1092 usb_dev->ep0.desc.wMaxPacketSize = cpu_to_le16(64);
1093 retval = usb_get_device_descriptor(usb_dev, USB_DT_DEVICE_SIZE);
1094 if (retval != sizeof usb_dev->descriptor) {
1095 mutex_unlock(&usb_bus_idr_lock);
1096 dev_dbg (parent_dev, "can't read %s device descriptor %d\n",
1097 dev_name(&usb_dev->dev), retval);
1098 return (retval < 0) ? retval : -EMSGSIZE;
1099 }
1100
1101 if (le16_to_cpu(usb_dev->descriptor.bcdUSB) >= 0x0201) {
1102 retval = usb_get_bos_descriptor(usb_dev);
1103 if (!retval) {
1104 usb_dev->lpm_capable = usb_device_supports_lpm(usb_dev);
1105 } else if (usb_dev->speed >= USB_SPEED_SUPER) {
1106 mutex_unlock(&usb_bus_idr_lock);
1107 dev_dbg(parent_dev, "can't read %s bos descriptor %d\n",
1108 dev_name(&usb_dev->dev), retval);
1109 return retval;
1110 }
1111 }
1112
1113 retval = usb_new_device (usb_dev);
1114 if (retval) {
1115 dev_err (parent_dev, "can't register root hub for %s, %d\n",
1116 dev_name(&usb_dev->dev), retval);
1117 } else {
1118 spin_lock_irq (&hcd_root_hub_lock);
1119 hcd->rh_registered = 1;
1120 spin_unlock_irq (&hcd_root_hub_lock);
1121
1122 /* Did the HC die before the root hub was registered? */
1123 if (HCD_DEAD(hcd))
1124 usb_hc_died (hcd); /* This time clean up */
1125 usb_dev->dev.of_node = parent_dev->of_node;
1126 }
1127 mutex_unlock(&usb_bus_idr_lock);
1128
1129 return retval;
1130}
1131
1132/*
1133 * usb_hcd_start_port_resume - a root-hub port is sending a resume signal
1134 * @bus: the bus which the root hub belongs to
1135 * @portnum: the port which is being resumed
1136 *
1137 * HCDs should call this function when they know that a resume signal is
1138 * being sent to a root-hub port. The root hub will be prevented from
1139 * going into autosuspend until usb_hcd_end_port_resume() is called.
1140 *
1141 * The bus's private lock must be held by the caller.
1142 */
1143void usb_hcd_start_port_resume(struct usb_bus *bus, int portnum)
1144{
1145 unsigned bit = 1 << portnum;
1146
1147 if (!(bus->resuming_ports & bit)) {
1148 bus->resuming_ports |= bit;
1149 pm_runtime_get_noresume(&bus->root_hub->dev);
1150 }
1151}
1152EXPORT_SYMBOL_GPL(usb_hcd_start_port_resume);
1153
1154/*
1155 * usb_hcd_end_port_resume - a root-hub port has stopped sending a resume signal
1156 * @bus: the bus which the root hub belongs to
1157 * @portnum: the port which is being resumed
1158 *
1159 * HCDs should call this function when they know that a resume signal has
1160 * stopped being sent to a root-hub port. The root hub will be allowed to
1161 * autosuspend again.
1162 *
1163 * The bus's private lock must be held by the caller.
1164 */
1165void usb_hcd_end_port_resume(struct usb_bus *bus, int portnum)
1166{
1167 unsigned bit = 1 << portnum;
1168
1169 if (bus->resuming_ports & bit) {
1170 bus->resuming_ports &= ~bit;
1171 pm_runtime_put_noidle(&bus->root_hub->dev);
1172 }
1173}
1174EXPORT_SYMBOL_GPL(usb_hcd_end_port_resume);
1175
1176/*-------------------------------------------------------------------------*/
1177
1178/**
1179 * usb_calc_bus_time - approximate periodic transaction time in nanoseconds
1180 * @speed: from dev->speed; USB_SPEED_{LOW,FULL,HIGH}
1181 * @is_input: true iff the transaction sends data to the host
1182 * @isoc: true for isochronous transactions, false for interrupt ones
1183 * @bytecount: how many bytes in the transaction.
1184 *
1185 * Return: Approximate bus time in nanoseconds for a periodic transaction.
1186 *
1187 * Note:
1188 * See USB 2.0 spec section 5.11.3; only periodic transfers need to be
1189 * scheduled in software, this function is only used for such scheduling.
1190 */
1191long usb_calc_bus_time (int speed, int is_input, int isoc, int bytecount)
1192{
1193 unsigned long tmp;
1194
1195 switch (speed) {
1196 case USB_SPEED_LOW: /* INTR only */
1197 if (is_input) {
1198 tmp = (67667L * (31L + 10L * BitTime (bytecount))) / 1000L;
1199 return 64060L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp;
1200 } else {
1201 tmp = (66700L * (31L + 10L * BitTime (bytecount))) / 1000L;
1202 return 64107L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp;
1203 }
1204 case USB_SPEED_FULL: /* ISOC or INTR */
1205 if (isoc) {
1206 tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
1207 return ((is_input) ? 7268L : 6265L) + BW_HOST_DELAY + tmp;
1208 } else {
1209 tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
1210 return 9107L + BW_HOST_DELAY + tmp;
1211 }
1212 case USB_SPEED_HIGH: /* ISOC or INTR */
1213 /* FIXME adjust for input vs output */
1214 if (isoc)
1215 tmp = HS_NSECS_ISO (bytecount);
1216 else
1217 tmp = HS_NSECS (bytecount);
1218 return tmp;
1219 default:
1220 pr_debug ("%s: bogus device speed!\n", usbcore_name);
1221 return -1;
1222 }
1223}
1224EXPORT_SYMBOL_GPL(usb_calc_bus_time);
1225
1226
1227/*-------------------------------------------------------------------------*/
1228
1229/*
1230 * Generic HC operations.
1231 */
1232
1233/*-------------------------------------------------------------------------*/
1234
1235/**
1236 * usb_hcd_link_urb_to_ep - add an URB to its endpoint queue
1237 * @hcd: host controller to which @urb was submitted
1238 * @urb: URB being submitted
1239 *
1240 * Host controller drivers should call this routine in their enqueue()
1241 * method. The HCD's private spinlock must be held and interrupts must
1242 * be disabled. The actions carried out here are required for URB
1243 * submission, as well as for endpoint shutdown and for usb_kill_urb.
1244 *
1245 * Return: 0 for no error, otherwise a negative error code (in which case
1246 * the enqueue() method must fail). If no error occurs but enqueue() fails
1247 * anyway, it must call usb_hcd_unlink_urb_from_ep() before releasing
1248 * the private spinlock and returning.
1249 */
1250int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb)
1251{
1252 int rc = 0;
1253
1254 spin_lock(&hcd_urb_list_lock);
1255
1256 /* Check that the URB isn't being killed */
1257 if (unlikely(atomic_read(&urb->reject))) {
1258 rc = -EPERM;
1259 goto done;
1260 }
1261
1262 if (unlikely(!urb->ep->enabled)) {
1263 rc = -ENOENT;
1264 goto done;
1265 }
1266
1267 if (unlikely(!urb->dev->can_submit)) {
1268 rc = -EHOSTUNREACH;
1269 goto done;
1270 }
1271
1272 /*
1273 * Check the host controller's state and add the URB to the
1274 * endpoint's queue.
1275 */
1276 if (HCD_RH_RUNNING(hcd)) {
1277 urb->unlinked = 0;
1278 list_add_tail(&urb->urb_list, &urb->ep->urb_list);
1279 } else {
1280 rc = -ESHUTDOWN;
1281 goto done;
1282 }
1283 done:
1284 spin_unlock(&hcd_urb_list_lock);
1285 return rc;
1286}
1287EXPORT_SYMBOL_GPL(usb_hcd_link_urb_to_ep);
1288
1289/**
1290 * usb_hcd_check_unlink_urb - check whether an URB may be unlinked
1291 * @hcd: host controller to which @urb was submitted
1292 * @urb: URB being checked for unlinkability
1293 * @status: error code to store in @urb if the unlink succeeds
1294 *
1295 * Host controller drivers should call this routine in their dequeue()
1296 * method. The HCD's private spinlock must be held and interrupts must
1297 * be disabled. The actions carried out here are required for making
1298 * sure than an unlink is valid.
1299 *
1300 * Return: 0 for no error, otherwise a negative error code (in which case
1301 * the dequeue() method must fail). The possible error codes are:
1302 *
1303 * -EIDRM: @urb was not submitted or has already completed.
1304 * The completion function may not have been called yet.
1305 *
1306 * -EBUSY: @urb has already been unlinked.
1307 */
1308int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
1309 int status)
1310{
1311 struct list_head *tmp;
1312
1313 /* insist the urb is still queued */
1314 list_for_each(tmp, &urb->ep->urb_list) {
1315 if (tmp == &urb->urb_list)
1316 break;
1317 }
1318 if (tmp != &urb->urb_list)
1319 return -EIDRM;
1320
1321 /* Any status except -EINPROGRESS means something already started to
1322 * unlink this URB from the hardware. So there's no more work to do.
1323 */
1324 if (urb->unlinked)
1325 return -EBUSY;
1326 urb->unlinked = status;
1327 return 0;
1328}
1329EXPORT_SYMBOL_GPL(usb_hcd_check_unlink_urb);
1330
1331/**
1332 * usb_hcd_unlink_urb_from_ep - remove an URB from its endpoint queue
1333 * @hcd: host controller to which @urb was submitted
1334 * @urb: URB being unlinked
1335 *
1336 * Host controller drivers should call this routine before calling
1337 * usb_hcd_giveback_urb(). The HCD's private spinlock must be held and
1338 * interrupts must be disabled. The actions carried out here are required
1339 * for URB completion.
1340 */
1341void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb)
1342{
1343 /* clear all state linking urb to this dev (and hcd) */
1344 spin_lock(&hcd_urb_list_lock);
1345 list_del_init(&urb->urb_list);
1346 spin_unlock(&hcd_urb_list_lock);
1347}
1348EXPORT_SYMBOL_GPL(usb_hcd_unlink_urb_from_ep);
1349
1350/*
1351 * Some usb host controllers can only perform dma using a small SRAM area.
1352 * The usb core itself is however optimized for host controllers that can dma
1353 * using regular system memory - like pci devices doing bus mastering.
1354 *
1355 * To support host controllers with limited dma capabilities we provide dma
1356 * bounce buffers. This feature can be enabled using the HCD_LOCAL_MEM flag.
1357 * For this to work properly the host controller code must first use the
1358 * function dma_declare_coherent_memory() to point out which memory area
1359 * that should be used for dma allocations.
1360 *
1361 * The HCD_LOCAL_MEM flag then tells the usb code to allocate all data for
1362 * dma using dma_alloc_coherent() which in turn allocates from the memory
1363 * area pointed out with dma_declare_coherent_memory().
1364 *
1365 * So, to summarize...
1366 *
1367 * - We need "local" memory, canonical example being
1368 * a small SRAM on a discrete controller being the
1369 * only memory that the controller can read ...
1370 * (a) "normal" kernel memory is no good, and
1371 * (b) there's not enough to share
1372 *
1373 * - The only *portable* hook for such stuff in the
1374 * DMA framework is dma_declare_coherent_memory()
1375 *
1376 * - So we use that, even though the primary requirement
1377 * is that the memory be "local" (hence addressable
1378 * by that device), not "coherent".
1379 *
1380 */
1381
1382static int hcd_alloc_coherent(struct usb_bus *bus,
1383 gfp_t mem_flags, dma_addr_t *dma_handle,
1384 void **vaddr_handle, size_t size,
1385 enum dma_data_direction dir)
1386{
1387 unsigned char *vaddr;
1388
1389 if (*vaddr_handle == NULL) {
1390 WARN_ON_ONCE(1);
1391 return -EFAULT;
1392 }
1393
1394 vaddr = hcd_buffer_alloc(bus, size + sizeof(vaddr),
1395 mem_flags, dma_handle);
1396 if (!vaddr)
1397 return -ENOMEM;
1398
1399 /*
1400 * Store the virtual address of the buffer at the end
1401 * of the allocated dma buffer. The size of the buffer
1402 * may be uneven so use unaligned functions instead
1403 * of just rounding up. It makes sense to optimize for
1404 * memory footprint over access speed since the amount
1405 * of memory available for dma may be limited.
1406 */
1407 put_unaligned((unsigned long)*vaddr_handle,
1408 (unsigned long *)(vaddr + size));
1409
1410 if (dir == DMA_TO_DEVICE)
1411 memcpy(vaddr, *vaddr_handle, size);
1412
1413 *vaddr_handle = vaddr;
1414 return 0;
1415}
1416
1417static void hcd_free_coherent(struct usb_bus *bus, dma_addr_t *dma_handle,
1418 void **vaddr_handle, size_t size,
1419 enum dma_data_direction dir)
1420{
1421 unsigned char *vaddr = *vaddr_handle;
1422
1423 vaddr = (void *)get_unaligned((unsigned long *)(vaddr + size));
1424
1425 if (dir == DMA_FROM_DEVICE)
1426 memcpy(vaddr, *vaddr_handle, size);
1427
1428 hcd_buffer_free(bus, size + sizeof(vaddr), *vaddr_handle, *dma_handle);
1429
1430 *vaddr_handle = vaddr;
1431 *dma_handle = 0;
1432}
1433
1434void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *hcd, struct urb *urb)
1435{
1436 if (IS_ENABLED(CONFIG_HAS_DMA) &&
1437 (urb->transfer_flags & URB_SETUP_MAP_SINGLE))
1438 dma_unmap_single(hcd->self.controller,
1439 urb->setup_dma,
1440 sizeof(struct usb_ctrlrequest),
1441 DMA_TO_DEVICE);
1442 else if (urb->transfer_flags & URB_SETUP_MAP_LOCAL)
1443 hcd_free_coherent(urb->dev->bus,
1444 &urb->setup_dma,
1445 (void **) &urb->setup_packet,
1446 sizeof(struct usb_ctrlrequest),
1447 DMA_TO_DEVICE);
1448
1449 /* Make it safe to call this routine more than once */
1450 urb->transfer_flags &= ~(URB_SETUP_MAP_SINGLE | URB_SETUP_MAP_LOCAL);
1451}
1452EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_setup_for_dma);
1453
1454static void unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
1455{
1456 if (hcd->driver->unmap_urb_for_dma)
1457 hcd->driver->unmap_urb_for_dma(hcd, urb);
1458 else
1459 usb_hcd_unmap_urb_for_dma(hcd, urb);
1460}
1461
1462void usb_hcd_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
1463{
1464 enum dma_data_direction dir;
1465
1466 usb_hcd_unmap_urb_setup_for_dma(hcd, urb);
1467
1468 dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
1469 if (IS_ENABLED(CONFIG_HAS_DMA) &&
1470 (urb->transfer_flags & URB_DMA_MAP_SG))
1471 dma_unmap_sg(hcd->self.controller,
1472 urb->sg,
1473 urb->num_sgs,
1474 dir);
1475 else if (IS_ENABLED(CONFIG_HAS_DMA) &&
1476 (urb->transfer_flags & URB_DMA_MAP_PAGE))
1477 dma_unmap_page(hcd->self.controller,
1478 urb->transfer_dma,
1479 urb->transfer_buffer_length,
1480 dir);
1481 else if (IS_ENABLED(CONFIG_HAS_DMA) &&
1482 (urb->transfer_flags & URB_DMA_MAP_SINGLE))
1483 dma_unmap_single(hcd->self.controller,
1484 urb->transfer_dma,
1485 urb->transfer_buffer_length,
1486 dir);
1487 else if (urb->transfer_flags & URB_MAP_LOCAL)
1488 hcd_free_coherent(urb->dev->bus,
1489 &urb->transfer_dma,
1490 &urb->transfer_buffer,
1491 urb->transfer_buffer_length,
1492 dir);
1493
1494 /* Make it safe to call this routine more than once */
1495 urb->transfer_flags &= ~(URB_DMA_MAP_SG | URB_DMA_MAP_PAGE |
1496 URB_DMA_MAP_SINGLE | URB_MAP_LOCAL);
1497}
1498EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_for_dma);
1499
1500static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
1501 gfp_t mem_flags)
1502{
1503 if (hcd->driver->map_urb_for_dma)
1504 return hcd->driver->map_urb_for_dma(hcd, urb, mem_flags);
1505 else
1506 return usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
1507}
1508
1509int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
1510 gfp_t mem_flags)
1511{
1512 enum dma_data_direction dir;
1513 int ret = 0;
1514
1515 /* Map the URB's buffers for DMA access.
1516 * Lower level HCD code should use *_dma exclusively,
1517 * unless it uses pio or talks to another transport,
1518 * or uses the provided scatter gather list for bulk.
1519 */
1520
1521 if (usb_endpoint_xfer_control(&urb->ep->desc)) {
1522 if (hcd->self.uses_pio_for_control)
1523 return ret;
1524 if (IS_ENABLED(CONFIG_HAS_DMA) && hcd->self.uses_dma) {
1525 urb->setup_dma = dma_map_single(
1526 hcd->self.controller,
1527 urb->setup_packet,
1528 sizeof(struct usb_ctrlrequest),
1529 DMA_TO_DEVICE);
1530 if (dma_mapping_error(hcd->self.controller,
1531 urb->setup_dma))
1532 return -EAGAIN;
1533 urb->transfer_flags |= URB_SETUP_MAP_SINGLE;
1534 } else if (hcd->driver->flags & HCD_LOCAL_MEM) {
1535 ret = hcd_alloc_coherent(
1536 urb->dev->bus, mem_flags,
1537 &urb->setup_dma,
1538 (void **)&urb->setup_packet,
1539 sizeof(struct usb_ctrlrequest),
1540 DMA_TO_DEVICE);
1541 if (ret)
1542 return ret;
1543 urb->transfer_flags |= URB_SETUP_MAP_LOCAL;
1544 }
1545 }
1546
1547 dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
1548 if (urb->transfer_buffer_length != 0
1549 && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) {
1550 if (IS_ENABLED(CONFIG_HAS_DMA) && hcd->self.uses_dma) {
1551 if (urb->num_sgs) {
1552 int n;
1553
1554 /* We don't support sg for isoc transfers ! */
1555 if (usb_endpoint_xfer_isoc(&urb->ep->desc)) {
1556 WARN_ON(1);
1557 return -EINVAL;
1558 }
1559
1560 n = dma_map_sg(
1561 hcd->self.controller,
1562 urb->sg,
1563 urb->num_sgs,
1564 dir);
1565 if (n <= 0)
1566 ret = -EAGAIN;
1567 else
1568 urb->transfer_flags |= URB_DMA_MAP_SG;
1569 urb->num_mapped_sgs = n;
1570 if (n != urb->num_sgs)
1571 urb->transfer_flags |=
1572 URB_DMA_SG_COMBINED;
1573 } else if (urb->sg) {
1574 struct scatterlist *sg = urb->sg;
1575 urb->transfer_dma = dma_map_page(
1576 hcd->self.controller,
1577 sg_page(sg),
1578 sg->offset,
1579 urb->transfer_buffer_length,
1580 dir);
1581 if (dma_mapping_error(hcd->self.controller,
1582 urb->transfer_dma))
1583 ret = -EAGAIN;
1584 else
1585 urb->transfer_flags |= URB_DMA_MAP_PAGE;
1586 } else if (is_vmalloc_addr(urb->transfer_buffer)) {
1587 WARN_ONCE(1, "transfer buffer not dma capable\n");
1588 ret = -EAGAIN;
1589 } else {
1590 urb->transfer_dma = dma_map_single(
1591 hcd->self.controller,
1592 urb->transfer_buffer,
1593 urb->transfer_buffer_length,
1594 dir);
1595 if (dma_mapping_error(hcd->self.controller,
1596 urb->transfer_dma))
1597 ret = -EAGAIN;
1598 else
1599 urb->transfer_flags |= URB_DMA_MAP_SINGLE;
1600 }
1601 } else if (hcd->driver->flags & HCD_LOCAL_MEM) {
1602 ret = hcd_alloc_coherent(
1603 urb->dev->bus, mem_flags,
1604 &urb->transfer_dma,
1605 &urb->transfer_buffer,
1606 urb->transfer_buffer_length,
1607 dir);
1608 if (ret == 0)
1609 urb->transfer_flags |= URB_MAP_LOCAL;
1610 }
1611 if (ret && (urb->transfer_flags & (URB_SETUP_MAP_SINGLE |
1612 URB_SETUP_MAP_LOCAL)))
1613 usb_hcd_unmap_urb_for_dma(hcd, urb);
1614 }
1615 return ret;
1616}
1617EXPORT_SYMBOL_GPL(usb_hcd_map_urb_for_dma);
1618
1619/*-------------------------------------------------------------------------*/
1620
1621/* may be called in any context with a valid urb->dev usecount
1622 * caller surrenders "ownership" of urb
1623 * expects usb_submit_urb() to have sanity checked and conditioned all
1624 * inputs in the urb
1625 */
1626int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
1627{
1628 int status;
1629 struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
1630
1631 /* increment urb's reference count as part of giving it to the HCD
1632 * (which will control it). HCD guarantees that it either returns
1633 * an error or calls giveback(), but not both.
1634 */
1635 usb_get_urb(urb);
1636 atomic_inc(&urb->use_count);
1637 atomic_inc(&urb->dev->urbnum);
1638 usbmon_urb_submit(&hcd->self, urb);
1639
1640 /* NOTE requirements on root-hub callers (usbfs and the hub
1641 * driver, for now): URBs' urb->transfer_buffer must be
1642 * valid and usb_buffer_{sync,unmap}() not be needed, since
1643 * they could clobber root hub response data. Also, control
1644 * URBs must be submitted in process context with interrupts
1645 * enabled.
1646 */
1647
1648 if (is_root_hub(urb->dev)) {
1649 status = rh_urb_enqueue(hcd, urb);
1650 } else {
1651 status = map_urb_for_dma(hcd, urb, mem_flags);
1652 if (likely(status == 0)) {
1653 status = hcd->driver->urb_enqueue(hcd, urb, mem_flags);
1654 if (unlikely(status))
1655 unmap_urb_for_dma(hcd, urb);
1656 }
1657 }
1658
1659 if (unlikely(status)) {
1660 usbmon_urb_submit_error(&hcd->self, urb, status);
1661 urb->hcpriv = NULL;
1662 INIT_LIST_HEAD(&urb->urb_list);
1663 atomic_dec(&urb->use_count);
1664 atomic_dec(&urb->dev->urbnum);
1665 if (atomic_read(&urb->reject))
1666 wake_up(&usb_kill_urb_queue);
1667 usb_put_urb(urb);
1668 }
1669 return status;
1670}
1671
1672/*-------------------------------------------------------------------------*/
1673
1674/* this makes the hcd giveback() the urb more quickly, by kicking it
1675 * off hardware queues (which may take a while) and returning it as
1676 * soon as practical. we've already set up the urb's return status,
1677 * but we can't know if the callback completed already.
1678 */
1679static int unlink1(struct usb_hcd *hcd, struct urb *urb, int status)
1680{
1681 int value;
1682
1683 if (is_root_hub(urb->dev))
1684 value = usb_rh_urb_dequeue(hcd, urb, status);
1685 else {
1686
1687 /* The only reason an HCD might fail this call is if
1688 * it has not yet fully queued the urb to begin with.
1689 * Such failures should be harmless. */
1690 value = hcd->driver->urb_dequeue(hcd, urb, status);
1691 }
1692 return value;
1693}
1694
1695/*
1696 * called in any context
1697 *
1698 * caller guarantees urb won't be recycled till both unlink()
1699 * and the urb's completion function return
1700 */
1701int usb_hcd_unlink_urb (struct urb *urb, int status)
1702{
1703 struct usb_hcd *hcd;
1704 struct usb_device *udev = urb->dev;
1705 int retval = -EIDRM;
1706 unsigned long flags;
1707
1708 /* Prevent the device and bus from going away while
1709 * the unlink is carried out. If they are already gone
1710 * then urb->use_count must be 0, since disconnected
1711 * devices can't have any active URBs.
1712 */
1713 spin_lock_irqsave(&hcd_urb_unlink_lock, flags);
1714 if (atomic_read(&urb->use_count) > 0) {
1715 retval = 0;
1716 usb_get_dev(udev);
1717 }
1718 spin_unlock_irqrestore(&hcd_urb_unlink_lock, flags);
1719 if (retval == 0) {
1720 hcd = bus_to_hcd(urb->dev->bus);
1721 retval = unlink1(hcd, urb, status);
1722 if (retval == 0)
1723 retval = -EINPROGRESS;
1724 else if (retval != -EIDRM && retval != -EBUSY)
1725 dev_dbg(&udev->dev, "hcd_unlink_urb %p fail %d\n",
1726 urb, retval);
1727 usb_put_dev(udev);
1728 }
1729 return retval;
1730}
1731
1732/*-------------------------------------------------------------------------*/
1733
1734static void __usb_hcd_giveback_urb(struct urb *urb)
1735{
1736 struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
1737 struct usb_anchor *anchor = urb->anchor;
1738 int status = urb->unlinked;
1739 unsigned long flags;
1740
1741 urb->hcpriv = NULL;
1742 if (unlikely((urb->transfer_flags & URB_SHORT_NOT_OK) &&
1743 urb->actual_length < urb->transfer_buffer_length &&
1744 !status))
1745 status = -EREMOTEIO;
1746
1747 unmap_urb_for_dma(hcd, urb);
1748 usbmon_urb_complete(&hcd->self, urb, status);
1749 usb_anchor_suspend_wakeups(anchor);
1750 usb_unanchor_urb(urb);
1751 if (likely(status == 0))
1752 usb_led_activity(USB_LED_EVENT_HOST);
1753
1754 /* pass ownership to the completion handler */
1755 urb->status = status;
1756
1757 /*
1758 * We disable local IRQs here avoid possible deadlock because
1759 * drivers may call spin_lock() to hold lock which might be
1760 * acquired in one hard interrupt handler.
1761 *
1762 * The local_irq_save()/local_irq_restore() around complete()
1763 * will be removed if current USB drivers have been cleaned up
1764 * and no one may trigger the above deadlock situation when
1765 * running complete() in tasklet.
1766 */
1767 local_irq_save(flags);
1768 urb->complete(urb);
1769 local_irq_restore(flags);
1770
1771 usb_anchor_resume_wakeups(anchor);
1772 atomic_dec(&urb->use_count);
1773 if (unlikely(atomic_read(&urb->reject)))
1774 wake_up(&usb_kill_urb_queue);
1775 usb_put_urb(urb);
1776}
1777
1778static void usb_giveback_urb_bh(unsigned long param)
1779{
1780 struct giveback_urb_bh *bh = (struct giveback_urb_bh *)param;
1781 struct list_head local_list;
1782
1783 spin_lock_irq(&bh->lock);
1784 bh->running = true;
1785 restart:
1786 list_replace_init(&bh->head, &local_list);
1787 spin_unlock_irq(&bh->lock);
1788
1789 while (!list_empty(&local_list)) {
1790 struct urb *urb;
1791
1792 urb = list_entry(local_list.next, struct urb, urb_list);
1793 list_del_init(&urb->urb_list);
1794 bh->completing_ep = urb->ep;
1795 __usb_hcd_giveback_urb(urb);
1796 bh->completing_ep = NULL;
1797 }
1798
1799 /* check if there are new URBs to giveback */
1800 spin_lock_irq(&bh->lock);
1801 if (!list_empty(&bh->head))
1802 goto restart;
1803 bh->running = false;
1804 spin_unlock_irq(&bh->lock);
1805}
1806
1807/**
1808 * usb_hcd_giveback_urb - return URB from HCD to device driver
1809 * @hcd: host controller returning the URB
1810 * @urb: urb being returned to the USB device driver.
1811 * @status: completion status code for the URB.
1812 * Context: in_interrupt()
1813 *
1814 * This hands the URB from HCD to its USB device driver, using its
1815 * completion function. The HCD has freed all per-urb resources
1816 * (and is done using urb->hcpriv). It also released all HCD locks;
1817 * the device driver won't cause problems if it frees, modifies,
1818 * or resubmits this URB.
1819 *
1820 * If @urb was unlinked, the value of @status will be overridden by
1821 * @urb->unlinked. Erroneous short transfers are detected in case
1822 * the HCD hasn't checked for them.
1823 */
1824void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, int status)
1825{
1826 struct giveback_urb_bh *bh;
1827 bool running, high_prio_bh;
1828
1829 /* pass status to tasklet via unlinked */
1830 if (likely(!urb->unlinked))
1831 urb->unlinked = status;
1832
1833 if (!hcd_giveback_urb_in_bh(hcd) && !is_root_hub(urb->dev)) {
1834 __usb_hcd_giveback_urb(urb);
1835 return;
1836 }
1837
1838 if (usb_pipeisoc(urb->pipe) || usb_pipeint(urb->pipe)) {
1839 bh = &hcd->high_prio_bh;
1840 high_prio_bh = true;
1841 } else {
1842 bh = &hcd->low_prio_bh;
1843 high_prio_bh = false;
1844 }
1845
1846 spin_lock(&bh->lock);
1847 list_add_tail(&urb->urb_list, &bh->head);
1848 running = bh->running;
1849 spin_unlock(&bh->lock);
1850
1851 if (running)
1852 ;
1853 else if (high_prio_bh)
1854 tasklet_hi_schedule(&bh->bh);
1855 else
1856 tasklet_schedule(&bh->bh);
1857}
1858EXPORT_SYMBOL_GPL(usb_hcd_giveback_urb);
1859
1860/*-------------------------------------------------------------------------*/
1861
1862/* Cancel all URBs pending on this endpoint and wait for the endpoint's
1863 * queue to drain completely. The caller must first insure that no more
1864 * URBs can be submitted for this endpoint.
1865 */
1866void usb_hcd_flush_endpoint(struct usb_device *udev,
1867 struct usb_host_endpoint *ep)
1868{
1869 struct usb_hcd *hcd;
1870 struct urb *urb;
1871
1872 if (!ep)
1873 return;
1874 might_sleep();
1875 hcd = bus_to_hcd(udev->bus);
1876
1877 /* No more submits can occur */
1878 spin_lock_irq(&hcd_urb_list_lock);
1879rescan:
1880 list_for_each_entry (urb, &ep->urb_list, urb_list) {
1881 int is_in;
1882
1883 if (urb->unlinked)
1884 continue;
1885 usb_get_urb (urb);
1886 is_in = usb_urb_dir_in(urb);
1887 spin_unlock(&hcd_urb_list_lock);
1888
1889 /* kick hcd */
1890 unlink1(hcd, urb, -ESHUTDOWN);
1891 dev_dbg (hcd->self.controller,
1892 "shutdown urb %p ep%d%s%s\n",
1893 urb, usb_endpoint_num(&ep->desc),
1894 is_in ? "in" : "out",
1895 ({ char *s;
1896
1897 switch (usb_endpoint_type(&ep->desc)) {
1898 case USB_ENDPOINT_XFER_CONTROL:
1899 s = ""; break;
1900 case USB_ENDPOINT_XFER_BULK:
1901 s = "-bulk"; break;
1902 case USB_ENDPOINT_XFER_INT:
1903 s = "-intr"; break;
1904 default:
1905 s = "-iso"; break;
1906 };
1907 s;
1908 }));
1909 usb_put_urb (urb);
1910
1911 /* list contents may have changed */
1912 spin_lock(&hcd_urb_list_lock);
1913 goto rescan;
1914 }
1915 spin_unlock_irq(&hcd_urb_list_lock);
1916
1917 /* Wait until the endpoint queue is completely empty */
1918 while (!list_empty (&ep->urb_list)) {
1919 spin_lock_irq(&hcd_urb_list_lock);
1920
1921 /* The list may have changed while we acquired the spinlock */
1922 urb = NULL;
1923 if (!list_empty (&ep->urb_list)) {
1924 urb = list_entry (ep->urb_list.prev, struct urb,
1925 urb_list);
1926 usb_get_urb (urb);
1927 }
1928 spin_unlock_irq(&hcd_urb_list_lock);
1929
1930 if (urb) {
1931 usb_kill_urb (urb);
1932 usb_put_urb (urb);
1933 }
1934 }
1935}
1936
1937/**
1938 * usb_hcd_alloc_bandwidth - check whether a new bandwidth setting exceeds
1939 * the bus bandwidth
1940 * @udev: target &usb_device
1941 * @new_config: new configuration to install
1942 * @cur_alt: the current alternate interface setting
1943 * @new_alt: alternate interface setting that is being installed
1944 *
1945 * To change configurations, pass in the new configuration in new_config,
1946 * and pass NULL for cur_alt and new_alt.
1947 *
1948 * To reset a device's configuration (put the device in the ADDRESSED state),
1949 * pass in NULL for new_config, cur_alt, and new_alt.
1950 *
1951 * To change alternate interface settings, pass in NULL for new_config,
1952 * pass in the current alternate interface setting in cur_alt,
1953 * and pass in the new alternate interface setting in new_alt.
1954 *
1955 * Return: An error if the requested bandwidth change exceeds the
1956 * bus bandwidth or host controller internal resources.
1957 */
1958int usb_hcd_alloc_bandwidth(struct usb_device *udev,
1959 struct usb_host_config *new_config,
1960 struct usb_host_interface *cur_alt,
1961 struct usb_host_interface *new_alt)
1962{
1963 int num_intfs, i, j;
1964 struct usb_host_interface *alt = NULL;
1965 int ret = 0;
1966 struct usb_hcd *hcd;
1967 struct usb_host_endpoint *ep;
1968
1969 hcd = bus_to_hcd(udev->bus);
1970 if (!hcd->driver->check_bandwidth)
1971 return 0;
1972
1973 /* Configuration is being removed - set configuration 0 */
1974 if (!new_config && !cur_alt) {
1975 for (i = 1; i < 16; ++i) {
1976 ep = udev->ep_out[i];
1977 if (ep)
1978 hcd->driver->drop_endpoint(hcd, udev, ep);
1979 ep = udev->ep_in[i];
1980 if (ep)
1981 hcd->driver->drop_endpoint(hcd, udev, ep);
1982 }
1983 hcd->driver->check_bandwidth(hcd, udev);
1984 return 0;
1985 }
1986 /* Check if the HCD says there's enough bandwidth. Enable all endpoints
1987 * each interface's alt setting 0 and ask the HCD to check the bandwidth
1988 * of the bus. There will always be bandwidth for endpoint 0, so it's
1989 * ok to exclude it.
1990 */
1991 if (new_config) {
1992 num_intfs = new_config->desc.bNumInterfaces;
1993 /* Remove endpoints (except endpoint 0, which is always on the
1994 * schedule) from the old config from the schedule
1995 */
1996 for (i = 1; i < 16; ++i) {
1997 ep = udev->ep_out[i];
1998 if (ep) {
1999 ret = hcd->driver->drop_endpoint(hcd, udev, ep);
2000 if (ret < 0)
2001 goto reset;
2002 }
2003 ep = udev->ep_in[i];
2004 if (ep) {
2005 ret = hcd->driver->drop_endpoint(hcd, udev, ep);
2006 if (ret < 0)
2007 goto reset;
2008 }
2009 }
2010 for (i = 0; i < num_intfs; ++i) {
2011 struct usb_host_interface *first_alt;
2012 int iface_num;
2013
2014 first_alt = &new_config->intf_cache[i]->altsetting[0];
2015 iface_num = first_alt->desc.bInterfaceNumber;
2016 /* Set up endpoints for alternate interface setting 0 */
2017 alt = usb_find_alt_setting(new_config, iface_num, 0);
2018 if (!alt)
2019 /* No alt setting 0? Pick the first setting. */
2020 alt = first_alt;
2021
2022 for (j = 0; j < alt->desc.bNumEndpoints; j++) {
2023 ret = hcd->driver->add_endpoint(hcd, udev, &alt->endpoint[j]);
2024 if (ret < 0)
2025 goto reset;
2026 }
2027 }
2028 }
2029 if (cur_alt && new_alt) {
2030 struct usb_interface *iface = usb_ifnum_to_if(udev,
2031 cur_alt->desc.bInterfaceNumber);
2032
2033 if (!iface)
2034 return -EINVAL;
2035 if (iface->resetting_device) {
2036 /*
2037 * The USB core just reset the device, so the xHCI host
2038 * and the device will think alt setting 0 is installed.
2039 * However, the USB core will pass in the alternate
2040 * setting installed before the reset as cur_alt. Dig
2041 * out the alternate setting 0 structure, or the first
2042 * alternate setting if a broken device doesn't have alt
2043 * setting 0.
2044 */
2045 cur_alt = usb_altnum_to_altsetting(iface, 0);
2046 if (!cur_alt)
2047 cur_alt = &iface->altsetting[0];
2048 }
2049
2050 /* Drop all the endpoints in the current alt setting */
2051 for (i = 0; i < cur_alt->desc.bNumEndpoints; i++) {
2052 ret = hcd->driver->drop_endpoint(hcd, udev,
2053 &cur_alt->endpoint[i]);
2054 if (ret < 0)
2055 goto reset;
2056 }
2057 /* Add all the endpoints in the new alt setting */
2058 for (i = 0; i < new_alt->desc.bNumEndpoints; i++) {
2059 ret = hcd->driver->add_endpoint(hcd, udev,
2060 &new_alt->endpoint[i]);
2061 if (ret < 0)
2062 goto reset;
2063 }
2064 }
2065 ret = hcd->driver->check_bandwidth(hcd, udev);
2066reset:
2067 if (ret < 0)
2068 hcd->driver->reset_bandwidth(hcd, udev);
2069 return ret;
2070}
2071
2072/* Disables the endpoint: synchronizes with the hcd to make sure all
2073 * endpoint state is gone from hardware. usb_hcd_flush_endpoint() must
2074 * have been called previously. Use for set_configuration, set_interface,
2075 * driver removal, physical disconnect.
2076 *
2077 * example: a qh stored in ep->hcpriv, holding state related to endpoint
2078 * type, maxpacket size, toggle, halt status, and scheduling.
2079 */
2080void usb_hcd_disable_endpoint(struct usb_device *udev,
2081 struct usb_host_endpoint *ep)
2082{
2083 struct usb_hcd *hcd;
2084
2085 might_sleep();
2086 hcd = bus_to_hcd(udev->bus);
2087 if (hcd->driver->endpoint_disable)
2088 hcd->driver->endpoint_disable(hcd, ep);
2089}
2090
2091/**
2092 * usb_hcd_reset_endpoint - reset host endpoint state
2093 * @udev: USB device.
2094 * @ep: the endpoint to reset.
2095 *
2096 * Resets any host endpoint state such as the toggle bit, sequence
2097 * number and current window.
2098 */
2099void usb_hcd_reset_endpoint(struct usb_device *udev,
2100 struct usb_host_endpoint *ep)
2101{
2102 struct usb_hcd *hcd = bus_to_hcd(udev->bus);
2103
2104 if (hcd->driver->endpoint_reset)
2105 hcd->driver->endpoint_reset(hcd, ep);
2106 else {
2107 int epnum = usb_endpoint_num(&ep->desc);
2108 int is_out = usb_endpoint_dir_out(&ep->desc);
2109 int is_control = usb_endpoint_xfer_control(&ep->desc);
2110
2111 usb_settoggle(udev, epnum, is_out, 0);
2112 if (is_control)
2113 usb_settoggle(udev, epnum, !is_out, 0);
2114 }
2115}
2116
2117/**
2118 * usb_alloc_streams - allocate bulk endpoint stream IDs.
2119 * @interface: alternate setting that includes all endpoints.
2120 * @eps: array of endpoints that need streams.
2121 * @num_eps: number of endpoints in the array.
2122 * @num_streams: number of streams to allocate.
2123 * @mem_flags: flags hcd should use to allocate memory.
2124 *
2125 * Sets up a group of bulk endpoints to have @num_streams stream IDs available.
2126 * Drivers may queue multiple transfers to different stream IDs, which may
2127 * complete in a different order than they were queued.
2128 *
2129 * Return: On success, the number of allocated streams. On failure, a negative
2130 * error code.
2131 */
2132int usb_alloc_streams(struct usb_interface *interface,
2133 struct usb_host_endpoint **eps, unsigned int num_eps,
2134 unsigned int num_streams, gfp_t mem_flags)
2135{
2136 struct usb_hcd *hcd;
2137 struct usb_device *dev;
2138 int i, ret;
2139
2140 dev = interface_to_usbdev(interface);
2141 hcd = bus_to_hcd(dev->bus);
2142 if (!hcd->driver->alloc_streams || !hcd->driver->free_streams)
2143 return -EINVAL;
2144 if (dev->speed < USB_SPEED_SUPER)
2145 return -EINVAL;
2146 if (dev->state < USB_STATE_CONFIGURED)
2147 return -ENODEV;
2148
2149 for (i = 0; i < num_eps; i++) {
2150 /* Streams only apply to bulk endpoints. */
2151 if (!usb_endpoint_xfer_bulk(&eps[i]->desc))
2152 return -EINVAL;
2153 /* Re-alloc is not allowed */
2154 if (eps[i]->streams)
2155 return -EINVAL;
2156 }
2157
2158 ret = hcd->driver->alloc_streams(hcd, dev, eps, num_eps,
2159 num_streams, mem_flags);
2160 if (ret < 0)
2161 return ret;
2162
2163 for (i = 0; i < num_eps; i++)
2164 eps[i]->streams = ret;
2165
2166 return ret;
2167}
2168EXPORT_SYMBOL_GPL(usb_alloc_streams);
2169
2170/**
2171 * usb_free_streams - free bulk endpoint stream IDs.
2172 * @interface: alternate setting that includes all endpoints.
2173 * @eps: array of endpoints to remove streams from.
2174 * @num_eps: number of endpoints in the array.
2175 * @mem_flags: flags hcd should use to allocate memory.
2176 *
2177 * Reverts a group of bulk endpoints back to not using stream IDs.
2178 * Can fail if we are given bad arguments, or HCD is broken.
2179 *
2180 * Return: 0 on success. On failure, a negative error code.
2181 */
2182int usb_free_streams(struct usb_interface *interface,
2183 struct usb_host_endpoint **eps, unsigned int num_eps,
2184 gfp_t mem_flags)
2185{
2186 struct usb_hcd *hcd;
2187 struct usb_device *dev;
2188 int i, ret;
2189
2190 dev = interface_to_usbdev(interface);
2191 hcd = bus_to_hcd(dev->bus);
2192 if (dev->speed < USB_SPEED_SUPER)
2193 return -EINVAL;
2194
2195 /* Double-free is not allowed */
2196 for (i = 0; i < num_eps; i++)
2197 if (!eps[i] || !eps[i]->streams)
2198 return -EINVAL;
2199
2200 ret = hcd->driver->free_streams(hcd, dev, eps, num_eps, mem_flags);
2201 if (ret < 0)
2202 return ret;
2203
2204 for (i = 0; i < num_eps; i++)
2205 eps[i]->streams = 0;
2206
2207 return ret;
2208}
2209EXPORT_SYMBOL_GPL(usb_free_streams);
2210
2211/* Protect against drivers that try to unlink URBs after the device
2212 * is gone, by waiting until all unlinks for @udev are finished.
2213 * Since we don't currently track URBs by device, simply wait until
2214 * nothing is running in the locked region of usb_hcd_unlink_urb().
2215 */
2216void usb_hcd_synchronize_unlinks(struct usb_device *udev)
2217{
2218 spin_lock_irq(&hcd_urb_unlink_lock);
2219 spin_unlock_irq(&hcd_urb_unlink_lock);
2220}
2221
2222/*-------------------------------------------------------------------------*/
2223
2224/* called in any context */
2225int usb_hcd_get_frame_number (struct usb_device *udev)
2226{
2227 struct usb_hcd *hcd = bus_to_hcd(udev->bus);
2228
2229 if (!HCD_RH_RUNNING(hcd))
2230 return -ESHUTDOWN;
2231 return hcd->driver->get_frame_number (hcd);
2232}
2233
2234/*-------------------------------------------------------------------------*/
2235
2236#ifdef CONFIG_PM
2237
2238int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg)
2239{
2240 struct usb_hcd *hcd = bus_to_hcd(rhdev->bus);
2241 int status;
2242 int old_state = hcd->state;
2243
2244 dev_dbg(&rhdev->dev, "bus %ssuspend, wakeup %d\n",
2245 (PMSG_IS_AUTO(msg) ? "auto-" : ""),
2246 rhdev->do_remote_wakeup);
2247 if (HCD_DEAD(hcd)) {
2248 dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "suspend");
2249 return 0;
2250 }
2251
2252 if (!hcd->driver->bus_suspend) {
2253 status = -ENOENT;
2254 } else {
2255 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2256 hcd->state = HC_STATE_QUIESCING;
2257 status = hcd->driver->bus_suspend(hcd);
2258 }
2259 if (status == 0) {
2260 usb_set_device_state(rhdev, USB_STATE_SUSPENDED);
2261 hcd->state = HC_STATE_SUSPENDED;
2262
2263 /* Did we race with a root-hub wakeup event? */
2264 if (rhdev->do_remote_wakeup) {
2265 char buffer[6];
2266
2267 status = hcd->driver->hub_status_data(hcd, buffer);
2268 if (status != 0) {
2269 dev_dbg(&rhdev->dev, "suspend raced with wakeup event\n");
2270 hcd_bus_resume(rhdev, PMSG_AUTO_RESUME);
2271 status = -EBUSY;
2272 }
2273 }
2274 } else {
2275 spin_lock_irq(&hcd_root_hub_lock);
2276 if (!HCD_DEAD(hcd)) {
2277 set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2278 hcd->state = old_state;
2279 }
2280 spin_unlock_irq(&hcd_root_hub_lock);
2281 dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
2282 "suspend", status);
2283 }
2284 return status;
2285}
2286
2287int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
2288{
2289 struct usb_hcd *hcd = bus_to_hcd(rhdev->bus);
2290 int status;
2291 int old_state = hcd->state;
2292
2293 dev_dbg(&rhdev->dev, "usb %sresume\n",
2294 (PMSG_IS_AUTO(msg) ? "auto-" : ""));
2295 if (HCD_DEAD(hcd)) {
2296 dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "resume");
2297 return 0;
2298 }
2299 if (!hcd->driver->bus_resume)
2300 return -ENOENT;
2301 if (HCD_RH_RUNNING(hcd))
2302 return 0;
2303
2304 hcd->state = HC_STATE_RESUMING;
2305 status = hcd->driver->bus_resume(hcd);
2306 clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
2307 if (status == 0) {
2308 struct usb_device *udev;
2309 int port1;
2310
2311 spin_lock_irq(&hcd_root_hub_lock);
2312 if (!HCD_DEAD(hcd)) {
2313 usb_set_device_state(rhdev, rhdev->actconfig
2314 ? USB_STATE_CONFIGURED
2315 : USB_STATE_ADDRESS);
2316 set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2317 hcd->state = HC_STATE_RUNNING;
2318 }
2319 spin_unlock_irq(&hcd_root_hub_lock);
2320
2321 /*
2322 * Check whether any of the enabled ports on the root hub are
2323 * unsuspended. If they are then a TRSMRCY delay is needed
2324 * (this is what the USB-2 spec calls a "global resume").
2325 * Otherwise we can skip the delay.
2326 */
2327 usb_hub_for_each_child(rhdev, port1, udev) {
2328 if (udev->state != USB_STATE_NOTATTACHED &&
2329 !udev->port_is_suspended) {
2330 usleep_range(10000, 11000); /* TRSMRCY */
2331 break;
2332 }
2333 }
2334 } else {
2335 hcd->state = old_state;
2336 dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
2337 "resume", status);
2338 if (status != -ESHUTDOWN)
2339 usb_hc_died(hcd);
2340 }
2341 return status;
2342}
2343
2344/* Workqueue routine for root-hub remote wakeup */
2345static void hcd_resume_work(struct work_struct *work)
2346{
2347 struct usb_hcd *hcd = container_of(work, struct usb_hcd, wakeup_work);
2348 struct usb_device *udev = hcd->self.root_hub;
2349
2350 usb_remote_wakeup(udev);
2351}
2352
2353/**
2354 * usb_hcd_resume_root_hub - called by HCD to resume its root hub
2355 * @hcd: host controller for this root hub
2356 *
2357 * The USB host controller calls this function when its root hub is
2358 * suspended (with the remote wakeup feature enabled) and a remote
2359 * wakeup request is received. The routine submits a workqueue request
2360 * to resume the root hub (that is, manage its downstream ports again).
2361 */
2362void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
2363{
2364 unsigned long flags;
2365
2366 spin_lock_irqsave (&hcd_root_hub_lock, flags);
2367 if (hcd->rh_registered) {
2368 set_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
2369 queue_work(pm_wq, &hcd->wakeup_work);
2370 }
2371 spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
2372}
2373EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub);
2374
2375#endif /* CONFIG_PM */
2376
2377/*-------------------------------------------------------------------------*/
2378
2379#ifdef CONFIG_USB_OTG
2380
2381/**
2382 * usb_bus_start_enum - start immediate enumeration (for OTG)
2383 * @bus: the bus (must use hcd framework)
2384 * @port_num: 1-based number of port; usually bus->otg_port
2385 * Context: in_interrupt()
2386 *
2387 * Starts enumeration, with an immediate reset followed later by
2388 * hub_wq identifying and possibly configuring the device.
2389 * This is needed by OTG controller drivers, where it helps meet
2390 * HNP protocol timing requirements for starting a port reset.
2391 *
2392 * Return: 0 if successful.
2393 */
2394int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num)
2395{
2396 struct usb_hcd *hcd;
2397 int status = -EOPNOTSUPP;
2398
2399 /* NOTE: since HNP can't start by grabbing the bus's address0_sem,
2400 * boards with root hubs hooked up to internal devices (instead of
2401 * just the OTG port) may need more attention to resetting...
2402 */
2403 hcd = bus_to_hcd(bus);
2404 if (port_num && hcd->driver->start_port_reset)
2405 status = hcd->driver->start_port_reset(hcd, port_num);
2406
2407 /* allocate hub_wq shortly after (first) root port reset finishes;
2408 * it may issue others, until at least 50 msecs have passed.
2409 */
2410 if (status == 0)
2411 mod_timer(&hcd->rh_timer, jiffies + msecs_to_jiffies(10));
2412 return status;
2413}
2414EXPORT_SYMBOL_GPL(usb_bus_start_enum);
2415
2416#endif
2417
2418/*-------------------------------------------------------------------------*/
2419
2420/**
2421 * usb_hcd_irq - hook IRQs to HCD framework (bus glue)
2422 * @irq: the IRQ being raised
2423 * @__hcd: pointer to the HCD whose IRQ is being signaled
2424 *
2425 * If the controller isn't HALTed, calls the driver's irq handler.
2426 * Checks whether the controller is now dead.
2427 *
2428 * Return: %IRQ_HANDLED if the IRQ was handled. %IRQ_NONE otherwise.
2429 */
2430irqreturn_t usb_hcd_irq (int irq, void *__hcd)
2431{
2432 struct usb_hcd *hcd = __hcd;
2433 irqreturn_t rc;
2434
2435 if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd)))
2436 rc = IRQ_NONE;
2437 else if (hcd->driver->irq(hcd) == IRQ_NONE)
2438 rc = IRQ_NONE;
2439 else
2440 rc = IRQ_HANDLED;
2441
2442 return rc;
2443}
2444EXPORT_SYMBOL_GPL(usb_hcd_irq);
2445
2446/*-------------------------------------------------------------------------*/
2447
2448/**
2449 * usb_hc_died - report abnormal shutdown of a host controller (bus glue)
2450 * @hcd: pointer to the HCD representing the controller
2451 *
2452 * This is called by bus glue to report a USB host controller that died
2453 * while operations may still have been pending. It's called automatically
2454 * by the PCI glue, so only glue for non-PCI busses should need to call it.
2455 *
2456 * Only call this function with the primary HCD.
2457 */
2458void usb_hc_died (struct usb_hcd *hcd)
2459{
2460 unsigned long flags;
2461
2462 dev_err (hcd->self.controller, "HC died; cleaning up\n");
2463
2464 spin_lock_irqsave (&hcd_root_hub_lock, flags);
2465 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2466 set_bit(HCD_FLAG_DEAD, &hcd->flags);
2467 if (hcd->rh_registered) {
2468 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2469
2470 /* make hub_wq clean up old urbs and devices */
2471 usb_set_device_state (hcd->self.root_hub,
2472 USB_STATE_NOTATTACHED);
2473 usb_kick_hub_wq(hcd->self.root_hub);
2474 }
2475 if (usb_hcd_is_primary_hcd(hcd) && hcd->shared_hcd) {
2476 hcd = hcd->shared_hcd;
2477 if (hcd->rh_registered) {
2478 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2479
2480 /* make hub_wq clean up old urbs and devices */
2481 usb_set_device_state(hcd->self.root_hub,
2482 USB_STATE_NOTATTACHED);
2483 usb_kick_hub_wq(hcd->self.root_hub);
2484 }
2485 }
2486 spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
2487 /* Make sure that the other roothub is also deallocated. */
2488}
2489EXPORT_SYMBOL_GPL (usb_hc_died);
2490
2491/*-------------------------------------------------------------------------*/
2492
2493static void init_giveback_urb_bh(struct giveback_urb_bh *bh)
2494{
2495
2496 spin_lock_init(&bh->lock);
2497 INIT_LIST_HEAD(&bh->head);
2498 tasklet_init(&bh->bh, usb_giveback_urb_bh, (unsigned long)bh);
2499}
2500
2501/**
2502 * usb_create_shared_hcd - create and initialize an HCD structure
2503 * @driver: HC driver that will use this hcd
2504 * @dev: device for this HC, stored in hcd->self.controller
2505 * @bus_name: value to store in hcd->self.bus_name
2506 * @primary_hcd: a pointer to the usb_hcd structure that is sharing the
2507 * PCI device. Only allocate certain resources for the primary HCD
2508 * Context: !in_interrupt()
2509 *
2510 * Allocate a struct usb_hcd, with extra space at the end for the
2511 * HC driver's private data. Initialize the generic members of the
2512 * hcd structure.
2513 *
2514 * Return: On success, a pointer to the created and initialized HCD structure.
2515 * On failure (e.g. if memory is unavailable), %NULL.
2516 */
2517struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver,
2518 struct device *dev, const char *bus_name,
2519 struct usb_hcd *primary_hcd)
2520{
2521 struct usb_hcd *hcd;
2522
2523 hcd = kzalloc(sizeof(*hcd) + driver->hcd_priv_size, GFP_KERNEL);
2524 if (!hcd)
2525 return NULL;
2526 if (primary_hcd == NULL) {
2527 hcd->address0_mutex = kmalloc(sizeof(*hcd->address0_mutex),
2528 GFP_KERNEL);
2529 if (!hcd->address0_mutex) {
2530 kfree(hcd);
2531 dev_dbg(dev, "hcd address0 mutex alloc failed\n");
2532 return NULL;
2533 }
2534 mutex_init(hcd->address0_mutex);
2535 hcd->bandwidth_mutex = kmalloc(sizeof(*hcd->bandwidth_mutex),
2536 GFP_KERNEL);
2537 if (!hcd->bandwidth_mutex) {
2538 kfree(hcd);
2539 dev_dbg(dev, "hcd bandwidth mutex alloc failed\n");
2540 return NULL;
2541 }
2542 mutex_init(hcd->bandwidth_mutex);
2543 dev_set_drvdata(dev, hcd);
2544 } else {
2545 mutex_lock(&usb_port_peer_mutex);
2546 hcd->address0_mutex = primary_hcd->address0_mutex;
2547 hcd->bandwidth_mutex = primary_hcd->bandwidth_mutex;
2548 hcd->primary_hcd = primary_hcd;
2549 primary_hcd->primary_hcd = primary_hcd;
2550 hcd->shared_hcd = primary_hcd;
2551 primary_hcd->shared_hcd = hcd;
2552 mutex_unlock(&usb_port_peer_mutex);
2553 }
2554
2555 kref_init(&hcd->kref);
2556
2557 usb_bus_init(&hcd->self);
2558 hcd->self.controller = dev;
2559 hcd->self.bus_name = bus_name;
2560 hcd->self.uses_dma = (dev->dma_mask != NULL);
2561
2562 init_timer(&hcd->rh_timer);
2563 hcd->rh_timer.function = rh_timer_func;
2564 hcd->rh_timer.data = (unsigned long) hcd;
2565#ifdef CONFIG_PM
2566 INIT_WORK(&hcd->wakeup_work, hcd_resume_work);
2567#endif
2568
2569 hcd->driver = driver;
2570 hcd->speed = driver->flags & HCD_MASK;
2571 hcd->product_desc = (driver->product_desc) ? driver->product_desc :
2572 "USB Host Controller";
2573 return hcd;
2574}
2575EXPORT_SYMBOL_GPL(usb_create_shared_hcd);
2576
2577/**
2578 * usb_create_hcd - create and initialize an HCD structure
2579 * @driver: HC driver that will use this hcd
2580 * @dev: device for this HC, stored in hcd->self.controller
2581 * @bus_name: value to store in hcd->self.bus_name
2582 * Context: !in_interrupt()
2583 *
2584 * Allocate a struct usb_hcd, with extra space at the end for the
2585 * HC driver's private data. Initialize the generic members of the
2586 * hcd structure.
2587 *
2588 * Return: On success, a pointer to the created and initialized HCD
2589 * structure. On failure (e.g. if memory is unavailable), %NULL.
2590 */
2591struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
2592 struct device *dev, const char *bus_name)
2593{
2594 return usb_create_shared_hcd(driver, dev, bus_name, NULL);
2595}
2596EXPORT_SYMBOL_GPL(usb_create_hcd);
2597
2598/*
2599 * Roothubs that share one PCI device must also share the bandwidth mutex.
2600 * Don't deallocate the bandwidth_mutex until the last shared usb_hcd is
2601 * deallocated.
2602 *
2603 * Make sure to deallocate the bandwidth_mutex only when the last HCD is
2604 * freed. When hcd_release() is called for either hcd in a peer set,
2605 * invalidate the peer's ->shared_hcd and ->primary_hcd pointers.
2606 */
2607static void hcd_release(struct kref *kref)
2608{
2609 struct usb_hcd *hcd = container_of (kref, struct usb_hcd, kref);
2610
2611 mutex_lock(&usb_port_peer_mutex);
2612 if (hcd->shared_hcd) {
2613 struct usb_hcd *peer = hcd->shared_hcd;
2614
2615 peer->shared_hcd = NULL;
2616 peer->primary_hcd = NULL;
2617 } else {
2618 kfree(hcd->address0_mutex);
2619 kfree(hcd->bandwidth_mutex);
2620 }
2621 mutex_unlock(&usb_port_peer_mutex);
2622 kfree(hcd);
2623}
2624
2625struct usb_hcd *usb_get_hcd (struct usb_hcd *hcd)
2626{
2627 if (hcd)
2628 kref_get (&hcd->kref);
2629 return hcd;
2630}
2631EXPORT_SYMBOL_GPL(usb_get_hcd);
2632
2633void usb_put_hcd (struct usb_hcd *hcd)
2634{
2635 if (hcd)
2636 kref_put (&hcd->kref, hcd_release);
2637}
2638EXPORT_SYMBOL_GPL(usb_put_hcd);
2639
2640int usb_hcd_is_primary_hcd(struct usb_hcd *hcd)
2641{
2642 if (!hcd->primary_hcd)
2643 return 1;
2644 return hcd == hcd->primary_hcd;
2645}
2646EXPORT_SYMBOL_GPL(usb_hcd_is_primary_hcd);
2647
2648int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1)
2649{
2650 if (!hcd->driver->find_raw_port_number)
2651 return port1;
2652
2653 return hcd->driver->find_raw_port_number(hcd, port1);
2654}
2655
2656static int usb_hcd_request_irqs(struct usb_hcd *hcd,
2657 unsigned int irqnum, unsigned long irqflags)
2658{
2659 int retval;
2660
2661 if (hcd->driver->irq) {
2662
2663 snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
2664 hcd->driver->description, hcd->self.busnum);
2665 retval = request_irq(irqnum, &usb_hcd_irq, irqflags,
2666 hcd->irq_descr, hcd);
2667 if (retval != 0) {
2668 dev_err(hcd->self.controller,
2669 "request interrupt %d failed\n",
2670 irqnum);
2671 return retval;
2672 }
2673 hcd->irq = irqnum;
2674 dev_info(hcd->self.controller, "irq %d, %s 0x%08llx\n", irqnum,
2675 (hcd->driver->flags & HCD_MEMORY) ?
2676 "io mem" : "io base",
2677 (unsigned long long)hcd->rsrc_start);
2678 } else {
2679 hcd->irq = 0;
2680 if (hcd->rsrc_start)
2681 dev_info(hcd->self.controller, "%s 0x%08llx\n",
2682 (hcd->driver->flags & HCD_MEMORY) ?
2683 "io mem" : "io base",
2684 (unsigned long long)hcd->rsrc_start);
2685 }
2686 return 0;
2687}
2688
2689/*
2690 * Before we free this root hub, flush in-flight peering attempts
2691 * and disable peer lookups
2692 */
2693static void usb_put_invalidate_rhdev(struct usb_hcd *hcd)
2694{
2695 struct usb_device *rhdev;
2696
2697 mutex_lock(&usb_port_peer_mutex);
2698 rhdev = hcd->self.root_hub;
2699 hcd->self.root_hub = NULL;
2700 mutex_unlock(&usb_port_peer_mutex);
2701 usb_put_dev(rhdev);
2702}
2703
2704/**
2705 * usb_add_hcd - finish generic HCD structure initialization and register
2706 * @hcd: the usb_hcd structure to initialize
2707 * @irqnum: Interrupt line to allocate
2708 * @irqflags: Interrupt type flags
2709 *
2710 * Finish the remaining parts of generic HCD initialization: allocate the
2711 * buffers of consistent memory, register the bus, request the IRQ line,
2712 * and call the driver's reset() and start() routines.
2713 */
2714int usb_add_hcd(struct usb_hcd *hcd,
2715 unsigned int irqnum, unsigned long irqflags)
2716{
2717 int retval;
2718 struct usb_device *rhdev;
2719
2720 if (IS_ENABLED(CONFIG_USB_PHY) && !hcd->usb_phy) {
2721 struct usb_phy *phy = usb_get_phy_dev(hcd->self.controller, 0);
2722
2723 if (IS_ERR(phy)) {
2724 retval = PTR_ERR(phy);
2725 if (retval == -EPROBE_DEFER)
2726 return retval;
2727 } else {
2728 retval = usb_phy_init(phy);
2729 if (retval) {
2730 usb_put_phy(phy);
2731 return retval;
2732 }
2733 hcd->usb_phy = phy;
2734 hcd->remove_phy = 1;
2735 }
2736 }
2737
2738 if (IS_ENABLED(CONFIG_GENERIC_PHY) && !hcd->phy) {
2739 struct phy *phy = phy_get(hcd->self.controller, "usb");
2740
2741 if (IS_ERR(phy)) {
2742 retval = PTR_ERR(phy);
2743 if (retval == -EPROBE_DEFER)
2744 goto err_phy;
2745 } else {
2746 retval = phy_init(phy);
2747 if (retval) {
2748 phy_put(phy);
2749 goto err_phy;
2750 }
2751 retval = phy_power_on(phy);
2752 if (retval) {
2753 phy_exit(phy);
2754 phy_put(phy);
2755 goto err_phy;
2756 }
2757 hcd->phy = phy;
2758 hcd->remove_phy = 1;
2759 }
2760 }
2761
2762 dev_info(hcd->self.controller, "%s\n", hcd->product_desc);
2763
2764 /* Keep old behaviour if authorized_default is not in [0, 1]. */
2765 if (authorized_default < 0 || authorized_default > 1) {
2766 if (hcd->wireless)
2767 clear_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
2768 else
2769 set_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
2770 } else {
2771 if (authorized_default)
2772 set_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
2773 else
2774 clear_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
2775 }
2776 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
2777
2778 /* per default all interfaces are authorized */
2779 set_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags);
2780
2781 /* HC is in reset state, but accessible. Now do the one-time init,
2782 * bottom up so that hcds can customize the root hubs before hub_wq
2783 * starts talking to them. (Note, bus id is assigned early too.)
2784 */
2785 retval = hcd_buffer_create(hcd);
2786 if (retval != 0) {
2787 dev_dbg(hcd->self.controller, "pool alloc failed\n");
2788 goto err_create_buf;
2789 }
2790
2791 retval = usb_register_bus(&hcd->self);
2792 if (retval < 0)
2793 goto err_register_bus;
2794
2795 rhdev = usb_alloc_dev(NULL, &hcd->self, 0);
2796 if (rhdev == NULL) {
2797 dev_err(hcd->self.controller, "unable to allocate root hub\n");
2798 retval = -ENOMEM;
2799 goto err_allocate_root_hub;
2800 }
2801 mutex_lock(&usb_port_peer_mutex);
2802 hcd->self.root_hub = rhdev;
2803 mutex_unlock(&usb_port_peer_mutex);
2804
2805 switch (hcd->speed) {
2806 case HCD_USB11:
2807 rhdev->speed = USB_SPEED_FULL;
2808 break;
2809 case HCD_USB2:
2810 rhdev->speed = USB_SPEED_HIGH;
2811 break;
2812 case HCD_USB25:
2813 rhdev->speed = USB_SPEED_WIRELESS;
2814 break;
2815 case HCD_USB3:
2816 rhdev->speed = USB_SPEED_SUPER;
2817 break;
2818 case HCD_USB31:
2819 rhdev->speed = USB_SPEED_SUPER_PLUS;
2820 break;
2821 default:
2822 retval = -EINVAL;
2823 goto err_set_rh_speed;
2824 }
2825
2826 /* wakeup flag init defaults to "everything works" for root hubs,
2827 * but drivers can override it in reset() if needed, along with
2828 * recording the overall controller's system wakeup capability.
2829 */
2830 device_set_wakeup_capable(&rhdev->dev, 1);
2831
2832 /* HCD_FLAG_RH_RUNNING doesn't matter until the root hub is
2833 * registered. But since the controller can die at any time,
2834 * let's initialize the flag before touching the hardware.
2835 */
2836 set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2837
2838 /* "reset" is misnamed; its role is now one-time init. the controller
2839 * should already have been reset (and boot firmware kicked off etc).
2840 */
2841 if (hcd->driver->reset) {
2842 retval = hcd->driver->reset(hcd);
2843 if (retval < 0) {
2844 dev_err(hcd->self.controller, "can't setup: %d\n",
2845 retval);
2846 goto err_hcd_driver_setup;
2847 }
2848 }
2849 hcd->rh_pollable = 1;
2850
2851 /* NOTE: root hub and controller capabilities may not be the same */
2852 if (device_can_wakeup(hcd->self.controller)
2853 && device_can_wakeup(&hcd->self.root_hub->dev))
2854 dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
2855
2856 /* initialize tasklets */
2857 init_giveback_urb_bh(&hcd->high_prio_bh);
2858 init_giveback_urb_bh(&hcd->low_prio_bh);
2859
2860 /* enable irqs just before we start the controller,
2861 * if the BIOS provides legacy PCI irqs.
2862 */
2863 if (usb_hcd_is_primary_hcd(hcd) && irqnum) {
2864 retval = usb_hcd_request_irqs(hcd, irqnum, irqflags);
2865 if (retval)
2866 goto err_request_irq;
2867 }
2868
2869 hcd->state = HC_STATE_RUNNING;
2870 retval = hcd->driver->start(hcd);
2871 if (retval < 0) {
2872 dev_err(hcd->self.controller, "startup error %d\n", retval);
2873 goto err_hcd_driver_start;
2874 }
2875
2876 /* starting here, usbcore will pay attention to this root hub */
2877 retval = register_root_hub(hcd);
2878 if (retval != 0)
2879 goto err_register_root_hub;
2880
2881 retval = sysfs_create_group(&rhdev->dev.kobj, &usb_bus_attr_group);
2882 if (retval < 0) {
2883 printk(KERN_ERR "Cannot register USB bus sysfs attributes: %d\n",
2884 retval);
2885 goto error_create_attr_group;
2886 }
2887 if (hcd->uses_new_polling && HCD_POLL_RH(hcd))
2888 usb_hcd_poll_rh_status(hcd);
2889
2890 return retval;
2891
2892error_create_attr_group:
2893 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2894 if (HC_IS_RUNNING(hcd->state))
2895 hcd->state = HC_STATE_QUIESCING;
2896 spin_lock_irq(&hcd_root_hub_lock);
2897 hcd->rh_registered = 0;
2898 spin_unlock_irq(&hcd_root_hub_lock);
2899
2900#ifdef CONFIG_PM
2901 cancel_work_sync(&hcd->wakeup_work);
2902#endif
2903 mutex_lock(&usb_bus_idr_lock);
2904 usb_disconnect(&rhdev); /* Sets rhdev to NULL */
2905 mutex_unlock(&usb_bus_idr_lock);
2906err_register_root_hub:
2907 hcd->rh_pollable = 0;
2908 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2909 del_timer_sync(&hcd->rh_timer);
2910 hcd->driver->stop(hcd);
2911 hcd->state = HC_STATE_HALT;
2912 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2913 del_timer_sync(&hcd->rh_timer);
2914err_hcd_driver_start:
2915 if (usb_hcd_is_primary_hcd(hcd) && hcd->irq > 0)
2916 free_irq(irqnum, hcd);
2917err_request_irq:
2918err_hcd_driver_setup:
2919err_set_rh_speed:
2920 usb_put_invalidate_rhdev(hcd);
2921err_allocate_root_hub:
2922 usb_deregister_bus(&hcd->self);
2923err_register_bus:
2924 hcd_buffer_destroy(hcd);
2925err_create_buf:
2926 if (IS_ENABLED(CONFIG_GENERIC_PHY) && hcd->remove_phy && hcd->phy) {
2927 phy_power_off(hcd->phy);
2928 phy_exit(hcd->phy);
2929 phy_put(hcd->phy);
2930 hcd->phy = NULL;
2931 }
2932err_phy:
2933 if (hcd->remove_phy && hcd->usb_phy) {
2934 usb_phy_shutdown(hcd->usb_phy);
2935 usb_put_phy(hcd->usb_phy);
2936 hcd->usb_phy = NULL;
2937 }
2938 return retval;
2939}
2940EXPORT_SYMBOL_GPL(usb_add_hcd);
2941
2942/**
2943 * usb_remove_hcd - shutdown processing for generic HCDs
2944 * @hcd: the usb_hcd structure to remove
2945 * Context: !in_interrupt()
2946 *
2947 * Disconnects the root hub, then reverses the effects of usb_add_hcd(),
2948 * invoking the HCD's stop() method.
2949 */
2950void usb_remove_hcd(struct usb_hcd *hcd)
2951{
2952 struct usb_device *rhdev = hcd->self.root_hub;
2953
2954 dev_info(hcd->self.controller, "remove, state %x\n", hcd->state);
2955
2956 usb_get_dev(rhdev);
2957 sysfs_remove_group(&rhdev->dev.kobj, &usb_bus_attr_group);
2958
2959 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2960 if (HC_IS_RUNNING (hcd->state))
2961 hcd->state = HC_STATE_QUIESCING;
2962
2963 dev_dbg(hcd->self.controller, "roothub graceful disconnect\n");
2964 spin_lock_irq (&hcd_root_hub_lock);
2965 hcd->rh_registered = 0;
2966 spin_unlock_irq (&hcd_root_hub_lock);
2967
2968#ifdef CONFIG_PM
2969 cancel_work_sync(&hcd->wakeup_work);
2970#endif
2971
2972 mutex_lock(&usb_bus_idr_lock);
2973 usb_disconnect(&rhdev); /* Sets rhdev to NULL */
2974 mutex_unlock(&usb_bus_idr_lock);
2975
2976 /*
2977 * tasklet_kill() isn't needed here because:
2978 * - driver's disconnect() called from usb_disconnect() should
2979 * make sure its URBs are completed during the disconnect()
2980 * callback
2981 *
2982 * - it is too late to run complete() here since driver may have
2983 * been removed already now
2984 */
2985
2986 /* Prevent any more root-hub status calls from the timer.
2987 * The HCD might still restart the timer (if a port status change
2988 * interrupt occurs), but usb_hcd_poll_rh_status() won't invoke
2989 * the hub_status_data() callback.
2990 */
2991 hcd->rh_pollable = 0;
2992 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2993 del_timer_sync(&hcd->rh_timer);
2994
2995 hcd->driver->stop(hcd);
2996 hcd->state = HC_STATE_HALT;
2997
2998 /* In case the HCD restarted the timer, stop it again. */
2999 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
3000 del_timer_sync(&hcd->rh_timer);
3001
3002 if (usb_hcd_is_primary_hcd(hcd)) {
3003 if (hcd->irq > 0)
3004 free_irq(hcd->irq, hcd);
3005 }
3006
3007 usb_deregister_bus(&hcd->self);
3008 hcd_buffer_destroy(hcd);
3009
3010 if (IS_ENABLED(CONFIG_GENERIC_PHY) && hcd->remove_phy && hcd->phy) {
3011 phy_power_off(hcd->phy);
3012 phy_exit(hcd->phy);
3013 phy_put(hcd->phy);
3014 hcd->phy = NULL;
3015 }
3016 if (hcd->remove_phy && hcd->usb_phy) {
3017 usb_phy_shutdown(hcd->usb_phy);
3018 usb_put_phy(hcd->usb_phy);
3019 hcd->usb_phy = NULL;
3020 }
3021
3022 usb_put_invalidate_rhdev(hcd);
3023}
3024EXPORT_SYMBOL_GPL(usb_remove_hcd);
3025
3026void
3027usb_hcd_platform_shutdown(struct platform_device *dev)
3028{
3029 struct usb_hcd *hcd = platform_get_drvdata(dev);
3030
3031 if (hcd->driver->shutdown)
3032 hcd->driver->shutdown(hcd);
3033}
3034EXPORT_SYMBOL_GPL(usb_hcd_platform_shutdown);
3035
3036/*-------------------------------------------------------------------------*/
3037
3038#if IS_ENABLED(CONFIG_USB_MON)
3039
3040const struct usb_mon_operations *mon_ops;
3041
3042/*
3043 * The registration is unlocked.
3044 * We do it this way because we do not want to lock in hot paths.
3045 *
3046 * Notice that the code is minimally error-proof. Because usbmon needs
3047 * symbols from usbcore, usbcore gets referenced and cannot be unloaded first.
3048 */
3049
3050int usb_mon_register(const struct usb_mon_operations *ops)
3051{
3052
3053 if (mon_ops)
3054 return -EBUSY;
3055
3056 mon_ops = ops;
3057 mb();
3058 return 0;
3059}
3060EXPORT_SYMBOL_GPL (usb_mon_register);
3061
3062void usb_mon_deregister (void)
3063{
3064
3065 if (mon_ops == NULL) {
3066 printk(KERN_ERR "USB: monitor was not registered\n");
3067 return;
3068 }
3069 mon_ops = NULL;
3070 mb();
3071}
3072EXPORT_SYMBOL_GPL (usb_mon_deregister);
3073
3074#endif /* CONFIG_USB_MON || CONFIG_USB_MON_MODULE */