Loading...
1/*
2 * Copyright 2008 Intel Corporation <hong.liu@intel.com>
3 * Copyright 2008 Red Hat <mjg@redhat.com>
4 *
5 * Permission is hereby granted, free of charge, to any person obtaining
6 * a copy of this software and associated documentation files (the
7 * "Software"), to deal in the Software without restriction, including
8 * without limitation the rights to use, copy, modify, merge, publish,
9 * distribute, sub license, and/or sell copies of the Software, and to
10 * permit persons to whom the Software is furnished to do so, subject to
11 * the following conditions:
12 *
13 * The above copyright notice and this permission notice (including the
14 * next paragraph) shall be included in all copies or substantial
15 * portions of the Software.
16 *
17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
18 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
19 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
20 * NON-INFRINGEMENT. IN NO EVENT SHALL INTEL AND/OR ITS SUPPLIERS BE
21 * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
22 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
23 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
24 * SOFTWARE.
25 *
26 */
27
28#include <linux/acpi.h>
29#include <linux/acpi_io.h>
30#include <acpi/video.h>
31
32#include "drmP.h"
33#include "i915_drm.h"
34#include "i915_drv.h"
35#include "intel_drv.h"
36
37#define PCI_ASLE 0xe4
38#define PCI_ASLS 0xfc
39
40#define OPREGION_HEADER_OFFSET 0
41#define OPREGION_ACPI_OFFSET 0x100
42#define ACPI_CLID 0x01ac /* current lid state indicator */
43#define ACPI_CDCK 0x01b0 /* current docking state indicator */
44#define OPREGION_SWSCI_OFFSET 0x200
45#define OPREGION_ASLE_OFFSET 0x300
46#define OPREGION_VBT_OFFSET 0x400
47
48#define OPREGION_SIGNATURE "IntelGraphicsMem"
49#define MBOX_ACPI (1<<0)
50#define MBOX_SWSCI (1<<1)
51#define MBOX_ASLE (1<<2)
52
53struct opregion_header {
54 u8 signature[16];
55 u32 size;
56 u32 opregion_ver;
57 u8 bios_ver[32];
58 u8 vbios_ver[16];
59 u8 driver_ver[16];
60 u32 mboxes;
61 u8 reserved[164];
62} __attribute__((packed));
63
64/* OpRegion mailbox #1: public ACPI methods */
65struct opregion_acpi {
66 u32 drdy; /* driver readiness */
67 u32 csts; /* notification status */
68 u32 cevt; /* current event */
69 u8 rsvd1[20];
70 u32 didl[8]; /* supported display devices ID list */
71 u32 cpdl[8]; /* currently presented display list */
72 u32 cadl[8]; /* currently active display list */
73 u32 nadl[8]; /* next active devices list */
74 u32 aslp; /* ASL sleep time-out */
75 u32 tidx; /* toggle table index */
76 u32 chpd; /* current hotplug enable indicator */
77 u32 clid; /* current lid state*/
78 u32 cdck; /* current docking state */
79 u32 sxsw; /* Sx state resume */
80 u32 evts; /* ASL supported events */
81 u32 cnot; /* current OS notification */
82 u32 nrdy; /* driver status */
83 u8 rsvd2[60];
84} __attribute__((packed));
85
86/* OpRegion mailbox #2: SWSCI */
87struct opregion_swsci {
88 u32 scic; /* SWSCI command|status|data */
89 u32 parm; /* command parameters */
90 u32 dslp; /* driver sleep time-out */
91 u8 rsvd[244];
92} __attribute__((packed));
93
94/* OpRegion mailbox #3: ASLE */
95struct opregion_asle {
96 u32 ardy; /* driver readiness */
97 u32 aslc; /* ASLE interrupt command */
98 u32 tche; /* technology enabled indicator */
99 u32 alsi; /* current ALS illuminance reading */
100 u32 bclp; /* backlight brightness to set */
101 u32 pfit; /* panel fitting state */
102 u32 cblv; /* current brightness level */
103 u16 bclm[20]; /* backlight level duty cycle mapping table */
104 u32 cpfm; /* current panel fitting mode */
105 u32 epfm; /* enabled panel fitting modes */
106 u8 plut[74]; /* panel LUT and identifier */
107 u32 pfmb; /* PWM freq and min brightness */
108 u8 rsvd[102];
109} __attribute__((packed));
110
111/* ASLE irq request bits */
112#define ASLE_SET_ALS_ILLUM (1 << 0)
113#define ASLE_SET_BACKLIGHT (1 << 1)
114#define ASLE_SET_PFIT (1 << 2)
115#define ASLE_SET_PWM_FREQ (1 << 3)
116#define ASLE_REQ_MSK 0xf
117
118/* response bits of ASLE irq request */
119#define ASLE_ALS_ILLUM_FAILED (1<<10)
120#define ASLE_BACKLIGHT_FAILED (1<<12)
121#define ASLE_PFIT_FAILED (1<<14)
122#define ASLE_PWM_FREQ_FAILED (1<<16)
123
124/* ASLE backlight brightness to set */
125#define ASLE_BCLP_VALID (1<<31)
126#define ASLE_BCLP_MSK (~(1<<31))
127
128/* ASLE panel fitting request */
129#define ASLE_PFIT_VALID (1<<31)
130#define ASLE_PFIT_CENTER (1<<0)
131#define ASLE_PFIT_STRETCH_TEXT (1<<1)
132#define ASLE_PFIT_STRETCH_GFX (1<<2)
133
134/* PWM frequency and minimum brightness */
135#define ASLE_PFMB_BRIGHTNESS_MASK (0xff)
136#define ASLE_PFMB_BRIGHTNESS_VALID (1<<8)
137#define ASLE_PFMB_PWM_MASK (0x7ffffe00)
138#define ASLE_PFMB_PWM_VALID (1<<31)
139
140#define ASLE_CBLV_VALID (1<<31)
141
142#define ACPI_OTHER_OUTPUT (0<<8)
143#define ACPI_VGA_OUTPUT (1<<8)
144#define ACPI_TV_OUTPUT (2<<8)
145#define ACPI_DIGITAL_OUTPUT (3<<8)
146#define ACPI_LVDS_OUTPUT (4<<8)
147
148#ifdef CONFIG_ACPI
149static u32 asle_set_backlight(struct drm_device *dev, u32 bclp)
150{
151 struct drm_i915_private *dev_priv = dev->dev_private;
152 struct opregion_asle *asle = dev_priv->opregion.asle;
153 u32 max;
154
155 if (!(bclp & ASLE_BCLP_VALID))
156 return ASLE_BACKLIGHT_FAILED;
157
158 bclp &= ASLE_BCLP_MSK;
159 if (bclp > 255)
160 return ASLE_BACKLIGHT_FAILED;
161
162 max = intel_panel_get_max_backlight(dev);
163 intel_panel_set_backlight(dev, bclp * max / 255);
164 asle->cblv = (bclp*0x64)/0xff | ASLE_CBLV_VALID;
165
166 return 0;
167}
168
169static u32 asle_set_als_illum(struct drm_device *dev, u32 alsi)
170{
171 /* alsi is the current ALS reading in lux. 0 indicates below sensor
172 range, 0xffff indicates above sensor range. 1-0xfffe are valid */
173 return 0;
174}
175
176static u32 asle_set_pwm_freq(struct drm_device *dev, u32 pfmb)
177{
178 struct drm_i915_private *dev_priv = dev->dev_private;
179 if (pfmb & ASLE_PFMB_PWM_VALID) {
180 u32 blc_pwm_ctl = I915_READ(BLC_PWM_CTL);
181 u32 pwm = pfmb & ASLE_PFMB_PWM_MASK;
182 blc_pwm_ctl &= BACKLIGHT_DUTY_CYCLE_MASK;
183 pwm = pwm >> 9;
184 /* FIXME - what do we do with the PWM? */
185 }
186 return 0;
187}
188
189static u32 asle_set_pfit(struct drm_device *dev, u32 pfit)
190{
191 /* Panel fitting is currently controlled by the X code, so this is a
192 noop until modesetting support works fully */
193 if (!(pfit & ASLE_PFIT_VALID))
194 return ASLE_PFIT_FAILED;
195 return 0;
196}
197
198void intel_opregion_asle_intr(struct drm_device *dev)
199{
200 struct drm_i915_private *dev_priv = dev->dev_private;
201 struct opregion_asle *asle = dev_priv->opregion.asle;
202 u32 asle_stat = 0;
203 u32 asle_req;
204
205 if (!asle)
206 return;
207
208 asle_req = asle->aslc & ASLE_REQ_MSK;
209
210 if (!asle_req) {
211 DRM_DEBUG_DRIVER("non asle set request??\n");
212 return;
213 }
214
215 if (asle_req & ASLE_SET_ALS_ILLUM)
216 asle_stat |= asle_set_als_illum(dev, asle->alsi);
217
218 if (asle_req & ASLE_SET_BACKLIGHT)
219 asle_stat |= asle_set_backlight(dev, asle->bclp);
220
221 if (asle_req & ASLE_SET_PFIT)
222 asle_stat |= asle_set_pfit(dev, asle->pfit);
223
224 if (asle_req & ASLE_SET_PWM_FREQ)
225 asle_stat |= asle_set_pwm_freq(dev, asle->pfmb);
226
227 asle->aslc = asle_stat;
228}
229
230void intel_opregion_gse_intr(struct drm_device *dev)
231{
232 struct drm_i915_private *dev_priv = dev->dev_private;
233 struct opregion_asle *asle = dev_priv->opregion.asle;
234 u32 asle_stat = 0;
235 u32 asle_req;
236
237 if (!asle)
238 return;
239
240 asle_req = asle->aslc & ASLE_REQ_MSK;
241
242 if (!asle_req) {
243 DRM_DEBUG_DRIVER("non asle set request??\n");
244 return;
245 }
246
247 if (asle_req & ASLE_SET_ALS_ILLUM) {
248 DRM_DEBUG_DRIVER("Illum is not supported\n");
249 asle_stat |= ASLE_ALS_ILLUM_FAILED;
250 }
251
252 if (asle_req & ASLE_SET_BACKLIGHT)
253 asle_stat |= asle_set_backlight(dev, asle->bclp);
254
255 if (asle_req & ASLE_SET_PFIT) {
256 DRM_DEBUG_DRIVER("Pfit is not supported\n");
257 asle_stat |= ASLE_PFIT_FAILED;
258 }
259
260 if (asle_req & ASLE_SET_PWM_FREQ) {
261 DRM_DEBUG_DRIVER("PWM freq is not supported\n");
262 asle_stat |= ASLE_PWM_FREQ_FAILED;
263 }
264
265 asle->aslc = asle_stat;
266}
267#define ASLE_ALS_EN (1<<0)
268#define ASLE_BLC_EN (1<<1)
269#define ASLE_PFIT_EN (1<<2)
270#define ASLE_PFMB_EN (1<<3)
271
272void intel_opregion_enable_asle(struct drm_device *dev)
273{
274 struct drm_i915_private *dev_priv = dev->dev_private;
275 struct opregion_asle *asle = dev_priv->opregion.asle;
276
277 if (asle) {
278 if (IS_MOBILE(dev))
279 intel_enable_asle(dev);
280
281 asle->tche = ASLE_ALS_EN | ASLE_BLC_EN | ASLE_PFIT_EN |
282 ASLE_PFMB_EN;
283 asle->ardy = 1;
284 }
285}
286
287#define ACPI_EV_DISPLAY_SWITCH (1<<0)
288#define ACPI_EV_LID (1<<1)
289#define ACPI_EV_DOCK (1<<2)
290
291static struct intel_opregion *system_opregion;
292
293static int intel_opregion_video_event(struct notifier_block *nb,
294 unsigned long val, void *data)
295{
296 /* The only video events relevant to opregion are 0x80. These indicate
297 either a docking event, lid switch or display switch request. In
298 Linux, these are handled by the dock, button and video drivers.
299 */
300
301 struct opregion_acpi *acpi;
302 struct acpi_bus_event *event = data;
303 int ret = NOTIFY_OK;
304
305 if (strcmp(event->device_class, ACPI_VIDEO_CLASS) != 0)
306 return NOTIFY_DONE;
307
308 if (!system_opregion)
309 return NOTIFY_DONE;
310
311 acpi = system_opregion->acpi;
312
313 if (event->type == 0x80 && !(acpi->cevt & 0x1))
314 ret = NOTIFY_BAD;
315
316 acpi->csts = 0;
317
318 return ret;
319}
320
321static struct notifier_block intel_opregion_notifier = {
322 .notifier_call = intel_opregion_video_event,
323};
324
325/*
326 * Initialise the DIDL field in opregion. This passes a list of devices to
327 * the firmware. Values are defined by section B.4.2 of the ACPI specification
328 * (version 3)
329 */
330
331static void intel_didl_outputs(struct drm_device *dev)
332{
333 struct drm_i915_private *dev_priv = dev->dev_private;
334 struct intel_opregion *opregion = &dev_priv->opregion;
335 struct drm_connector *connector;
336 acpi_handle handle;
337 struct acpi_device *acpi_dev, *acpi_cdev, *acpi_video_bus = NULL;
338 unsigned long long device_id;
339 acpi_status status;
340 int i = 0;
341
342 handle = DEVICE_ACPI_HANDLE(&dev->pdev->dev);
343 if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &acpi_dev)))
344 return;
345
346 if (acpi_is_video_device(acpi_dev))
347 acpi_video_bus = acpi_dev;
348 else {
349 list_for_each_entry(acpi_cdev, &acpi_dev->children, node) {
350 if (acpi_is_video_device(acpi_cdev)) {
351 acpi_video_bus = acpi_cdev;
352 break;
353 }
354 }
355 }
356
357 if (!acpi_video_bus) {
358 printk(KERN_WARNING "No ACPI video bus found\n");
359 return;
360 }
361
362 list_for_each_entry(acpi_cdev, &acpi_video_bus->children, node) {
363 if (i >= 8) {
364 dev_printk (KERN_ERR, &dev->pdev->dev,
365 "More than 8 outputs detected\n");
366 return;
367 }
368 status =
369 acpi_evaluate_integer(acpi_cdev->handle, "_ADR",
370 NULL, &device_id);
371 if (ACPI_SUCCESS(status)) {
372 if (!device_id)
373 goto blind_set;
374 opregion->acpi->didl[i] = (u32)(device_id & 0x0f0f);
375 i++;
376 }
377 }
378
379end:
380 /* If fewer than 8 outputs, the list must be null terminated */
381 if (i < 8)
382 opregion->acpi->didl[i] = 0;
383 return;
384
385blind_set:
386 i = 0;
387 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
388 int output_type = ACPI_OTHER_OUTPUT;
389 if (i >= 8) {
390 dev_printk (KERN_ERR, &dev->pdev->dev,
391 "More than 8 outputs detected\n");
392 return;
393 }
394 switch (connector->connector_type) {
395 case DRM_MODE_CONNECTOR_VGA:
396 case DRM_MODE_CONNECTOR_DVIA:
397 output_type = ACPI_VGA_OUTPUT;
398 break;
399 case DRM_MODE_CONNECTOR_Composite:
400 case DRM_MODE_CONNECTOR_SVIDEO:
401 case DRM_MODE_CONNECTOR_Component:
402 case DRM_MODE_CONNECTOR_9PinDIN:
403 output_type = ACPI_TV_OUTPUT;
404 break;
405 case DRM_MODE_CONNECTOR_DVII:
406 case DRM_MODE_CONNECTOR_DVID:
407 case DRM_MODE_CONNECTOR_DisplayPort:
408 case DRM_MODE_CONNECTOR_HDMIA:
409 case DRM_MODE_CONNECTOR_HDMIB:
410 output_type = ACPI_DIGITAL_OUTPUT;
411 break;
412 case DRM_MODE_CONNECTOR_LVDS:
413 output_type = ACPI_LVDS_OUTPUT;
414 break;
415 }
416 opregion->acpi->didl[i] |= (1<<31) | output_type | i;
417 i++;
418 }
419 goto end;
420}
421
422void intel_opregion_init(struct drm_device *dev)
423{
424 struct drm_i915_private *dev_priv = dev->dev_private;
425 struct intel_opregion *opregion = &dev_priv->opregion;
426
427 if (!opregion->header)
428 return;
429
430 if (opregion->acpi) {
431 if (drm_core_check_feature(dev, DRIVER_MODESET))
432 intel_didl_outputs(dev);
433
434 /* Notify BIOS we are ready to handle ACPI video ext notifs.
435 * Right now, all the events are handled by the ACPI video module.
436 * We don't actually need to do anything with them. */
437 opregion->acpi->csts = 0;
438 opregion->acpi->drdy = 1;
439
440 system_opregion = opregion;
441 register_acpi_notifier(&intel_opregion_notifier);
442 }
443
444 if (opregion->asle)
445 intel_opregion_enable_asle(dev);
446}
447
448void intel_opregion_fini(struct drm_device *dev)
449{
450 struct drm_i915_private *dev_priv = dev->dev_private;
451 struct intel_opregion *opregion = &dev_priv->opregion;
452
453 if (!opregion->header)
454 return;
455
456 if (opregion->acpi) {
457 opregion->acpi->drdy = 0;
458
459 system_opregion = NULL;
460 unregister_acpi_notifier(&intel_opregion_notifier);
461 }
462
463 /* just clear all opregion memory pointers now */
464 iounmap(opregion->header);
465 opregion->header = NULL;
466 opregion->acpi = NULL;
467 opregion->swsci = NULL;
468 opregion->asle = NULL;
469 opregion->vbt = NULL;
470}
471#endif
472
473int intel_opregion_setup(struct drm_device *dev)
474{
475 struct drm_i915_private *dev_priv = dev->dev_private;
476 struct intel_opregion *opregion = &dev_priv->opregion;
477 void *base;
478 u32 asls, mboxes;
479 int err = 0;
480
481 pci_read_config_dword(dev->pdev, PCI_ASLS, &asls);
482 DRM_DEBUG_DRIVER("graphic opregion physical addr: 0x%x\n", asls);
483 if (asls == 0) {
484 DRM_DEBUG_DRIVER("ACPI OpRegion not supported!\n");
485 return -ENOTSUPP;
486 }
487
488 base = acpi_os_ioremap(asls, OPREGION_SIZE);
489 if (!base)
490 return -ENOMEM;
491
492 if (memcmp(base, OPREGION_SIGNATURE, 16)) {
493 DRM_DEBUG_DRIVER("opregion signature mismatch\n");
494 err = -EINVAL;
495 goto err_out;
496 }
497 opregion->header = base;
498 opregion->vbt = base + OPREGION_VBT_OFFSET;
499
500 opregion->lid_state = base + ACPI_CLID;
501
502 mboxes = opregion->header->mboxes;
503 if (mboxes & MBOX_ACPI) {
504 DRM_DEBUG_DRIVER("Public ACPI methods supported\n");
505 opregion->acpi = base + OPREGION_ACPI_OFFSET;
506 }
507
508 if (mboxes & MBOX_SWSCI) {
509 DRM_DEBUG_DRIVER("SWSCI supported\n");
510 opregion->swsci = base + OPREGION_SWSCI_OFFSET;
511 }
512 if (mboxes & MBOX_ASLE) {
513 DRM_DEBUG_DRIVER("ASLE supported\n");
514 opregion->asle = base + OPREGION_ASLE_OFFSET;
515 }
516
517 return 0;
518
519err_out:
520 iounmap(base);
521 return err;
522}
1/*
2 * Copyright 2008 Intel Corporation <hong.liu@intel.com>
3 * Copyright 2008 Red Hat <mjg@redhat.com>
4 *
5 * Permission is hereby granted, free of charge, to any person obtaining
6 * a copy of this software and associated documentation files (the
7 * "Software"), to deal in the Software without restriction, including
8 * without limitation the rights to use, copy, modify, merge, publish,
9 * distribute, sub license, and/or sell copies of the Software, and to
10 * permit persons to whom the Software is furnished to do so, subject to
11 * the following conditions:
12 *
13 * The above copyright notice and this permission notice (including the
14 * next paragraph) shall be included in all copies or substantial
15 * portions of the Software.
16 *
17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
18 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
19 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
20 * NON-INFRINGEMENT. IN NO EVENT SHALL INTEL AND/OR ITS SUPPLIERS BE
21 * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
22 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
23 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
24 * SOFTWARE.
25 *
26 */
27
28#include <linux/acpi.h>
29#include <linux/dmi.h>
30#include <acpi/video.h>
31
32#include <drm/drmP.h>
33#include <drm/i915_drm.h>
34#include "i915_drv.h"
35#include "intel_drv.h"
36
37#define OPREGION_HEADER_OFFSET 0
38#define OPREGION_ACPI_OFFSET 0x100
39#define ACPI_CLID 0x01ac /* current lid state indicator */
40#define ACPI_CDCK 0x01b0 /* current docking state indicator */
41#define OPREGION_SWSCI_OFFSET 0x200
42#define OPREGION_ASLE_OFFSET 0x300
43#define OPREGION_VBT_OFFSET 0x400
44#define OPREGION_ASLE_EXT_OFFSET 0x1C00
45
46#define OPREGION_SIGNATURE "IntelGraphicsMem"
47#define MBOX_ACPI (1<<0)
48#define MBOX_SWSCI (1<<1)
49#define MBOX_ASLE (1<<2)
50#define MBOX_ASLE_EXT (1<<4)
51
52struct opregion_header {
53 u8 signature[16];
54 u32 size;
55 u32 opregion_ver;
56 u8 bios_ver[32];
57 u8 vbios_ver[16];
58 u8 driver_ver[16];
59 u32 mboxes;
60 u32 driver_model;
61 u32 pcon;
62 u8 dver[32];
63 u8 rsvd[124];
64} __packed;
65
66/* OpRegion mailbox #1: public ACPI methods */
67struct opregion_acpi {
68 u32 drdy; /* driver readiness */
69 u32 csts; /* notification status */
70 u32 cevt; /* current event */
71 u8 rsvd1[20];
72 u32 didl[8]; /* supported display devices ID list */
73 u32 cpdl[8]; /* currently presented display list */
74 u32 cadl[8]; /* currently active display list */
75 u32 nadl[8]; /* next active devices list */
76 u32 aslp; /* ASL sleep time-out */
77 u32 tidx; /* toggle table index */
78 u32 chpd; /* current hotplug enable indicator */
79 u32 clid; /* current lid state*/
80 u32 cdck; /* current docking state */
81 u32 sxsw; /* Sx state resume */
82 u32 evts; /* ASL supported events */
83 u32 cnot; /* current OS notification */
84 u32 nrdy; /* driver status */
85 u32 did2[7]; /* extended supported display devices ID list */
86 u32 cpd2[7]; /* extended attached display devices list */
87 u8 rsvd2[4];
88} __packed;
89
90/* OpRegion mailbox #2: SWSCI */
91struct opregion_swsci {
92 u32 scic; /* SWSCI command|status|data */
93 u32 parm; /* command parameters */
94 u32 dslp; /* driver sleep time-out */
95 u8 rsvd[244];
96} __packed;
97
98/* OpRegion mailbox #3: ASLE */
99struct opregion_asle {
100 u32 ardy; /* driver readiness */
101 u32 aslc; /* ASLE interrupt command */
102 u32 tche; /* technology enabled indicator */
103 u32 alsi; /* current ALS illuminance reading */
104 u32 bclp; /* backlight brightness to set */
105 u32 pfit; /* panel fitting state */
106 u32 cblv; /* current brightness level */
107 u16 bclm[20]; /* backlight level duty cycle mapping table */
108 u32 cpfm; /* current panel fitting mode */
109 u32 epfm; /* enabled panel fitting modes */
110 u8 plut[74]; /* panel LUT and identifier */
111 u32 pfmb; /* PWM freq and min brightness */
112 u32 cddv; /* color correction default values */
113 u32 pcft; /* power conservation features */
114 u32 srot; /* supported rotation angles */
115 u32 iuer; /* IUER events */
116 u64 fdss;
117 u32 fdsp;
118 u32 stat;
119 u64 rvda; /* Physical address of raw vbt data */
120 u32 rvds; /* Size of raw vbt data */
121 u8 rsvd[58];
122} __packed;
123
124/* OpRegion mailbox #5: ASLE ext */
125struct opregion_asle_ext {
126 u32 phed; /* Panel Header */
127 u8 bddc[256]; /* Panel EDID */
128 u8 rsvd[764];
129} __packed;
130
131/* Driver readiness indicator */
132#define ASLE_ARDY_READY (1 << 0)
133#define ASLE_ARDY_NOT_READY (0 << 0)
134
135/* ASLE Interrupt Command (ASLC) bits */
136#define ASLC_SET_ALS_ILLUM (1 << 0)
137#define ASLC_SET_BACKLIGHT (1 << 1)
138#define ASLC_SET_PFIT (1 << 2)
139#define ASLC_SET_PWM_FREQ (1 << 3)
140#define ASLC_SUPPORTED_ROTATION_ANGLES (1 << 4)
141#define ASLC_BUTTON_ARRAY (1 << 5)
142#define ASLC_CONVERTIBLE_INDICATOR (1 << 6)
143#define ASLC_DOCKING_INDICATOR (1 << 7)
144#define ASLC_ISCT_STATE_CHANGE (1 << 8)
145#define ASLC_REQ_MSK 0x1ff
146/* response bits */
147#define ASLC_ALS_ILLUM_FAILED (1 << 10)
148#define ASLC_BACKLIGHT_FAILED (1 << 12)
149#define ASLC_PFIT_FAILED (1 << 14)
150#define ASLC_PWM_FREQ_FAILED (1 << 16)
151#define ASLC_ROTATION_ANGLES_FAILED (1 << 18)
152#define ASLC_BUTTON_ARRAY_FAILED (1 << 20)
153#define ASLC_CONVERTIBLE_FAILED (1 << 22)
154#define ASLC_DOCKING_FAILED (1 << 24)
155#define ASLC_ISCT_STATE_FAILED (1 << 26)
156
157/* Technology enabled indicator */
158#define ASLE_TCHE_ALS_EN (1 << 0)
159#define ASLE_TCHE_BLC_EN (1 << 1)
160#define ASLE_TCHE_PFIT_EN (1 << 2)
161#define ASLE_TCHE_PFMB_EN (1 << 3)
162
163/* ASLE backlight brightness to set */
164#define ASLE_BCLP_VALID (1<<31)
165#define ASLE_BCLP_MSK (~(1<<31))
166
167/* ASLE panel fitting request */
168#define ASLE_PFIT_VALID (1<<31)
169#define ASLE_PFIT_CENTER (1<<0)
170#define ASLE_PFIT_STRETCH_TEXT (1<<1)
171#define ASLE_PFIT_STRETCH_GFX (1<<2)
172
173/* PWM frequency and minimum brightness */
174#define ASLE_PFMB_BRIGHTNESS_MASK (0xff)
175#define ASLE_PFMB_BRIGHTNESS_VALID (1<<8)
176#define ASLE_PFMB_PWM_MASK (0x7ffffe00)
177#define ASLE_PFMB_PWM_VALID (1<<31)
178
179#define ASLE_CBLV_VALID (1<<31)
180
181/* IUER */
182#define ASLE_IUER_DOCKING (1 << 7)
183#define ASLE_IUER_CONVERTIBLE (1 << 6)
184#define ASLE_IUER_ROTATION_LOCK_BTN (1 << 4)
185#define ASLE_IUER_VOLUME_DOWN_BTN (1 << 3)
186#define ASLE_IUER_VOLUME_UP_BTN (1 << 2)
187#define ASLE_IUER_WINDOWS_BTN (1 << 1)
188#define ASLE_IUER_POWER_BTN (1 << 0)
189
190/* Software System Control Interrupt (SWSCI) */
191#define SWSCI_SCIC_INDICATOR (1 << 0)
192#define SWSCI_SCIC_MAIN_FUNCTION_SHIFT 1
193#define SWSCI_SCIC_MAIN_FUNCTION_MASK (0xf << 1)
194#define SWSCI_SCIC_SUB_FUNCTION_SHIFT 8
195#define SWSCI_SCIC_SUB_FUNCTION_MASK (0xff << 8)
196#define SWSCI_SCIC_EXIT_PARAMETER_SHIFT 8
197#define SWSCI_SCIC_EXIT_PARAMETER_MASK (0xff << 8)
198#define SWSCI_SCIC_EXIT_STATUS_SHIFT 5
199#define SWSCI_SCIC_EXIT_STATUS_MASK (7 << 5)
200#define SWSCI_SCIC_EXIT_STATUS_SUCCESS 1
201
202#define SWSCI_FUNCTION_CODE(main, sub) \
203 ((main) << SWSCI_SCIC_MAIN_FUNCTION_SHIFT | \
204 (sub) << SWSCI_SCIC_SUB_FUNCTION_SHIFT)
205
206/* SWSCI: Get BIOS Data (GBDA) */
207#define SWSCI_GBDA 4
208#define SWSCI_GBDA_SUPPORTED_CALLS SWSCI_FUNCTION_CODE(SWSCI_GBDA, 0)
209#define SWSCI_GBDA_REQUESTED_CALLBACKS SWSCI_FUNCTION_CODE(SWSCI_GBDA, 1)
210#define SWSCI_GBDA_BOOT_DISPLAY_PREF SWSCI_FUNCTION_CODE(SWSCI_GBDA, 4)
211#define SWSCI_GBDA_PANEL_DETAILS SWSCI_FUNCTION_CODE(SWSCI_GBDA, 5)
212#define SWSCI_GBDA_TV_STANDARD SWSCI_FUNCTION_CODE(SWSCI_GBDA, 6)
213#define SWSCI_GBDA_INTERNAL_GRAPHICS SWSCI_FUNCTION_CODE(SWSCI_GBDA, 7)
214#define SWSCI_GBDA_SPREAD_SPECTRUM SWSCI_FUNCTION_CODE(SWSCI_GBDA, 10)
215
216/* SWSCI: System BIOS Callbacks (SBCB) */
217#define SWSCI_SBCB 6
218#define SWSCI_SBCB_SUPPORTED_CALLBACKS SWSCI_FUNCTION_CODE(SWSCI_SBCB, 0)
219#define SWSCI_SBCB_INIT_COMPLETION SWSCI_FUNCTION_CODE(SWSCI_SBCB, 1)
220#define SWSCI_SBCB_PRE_HIRES_SET_MODE SWSCI_FUNCTION_CODE(SWSCI_SBCB, 3)
221#define SWSCI_SBCB_POST_HIRES_SET_MODE SWSCI_FUNCTION_CODE(SWSCI_SBCB, 4)
222#define SWSCI_SBCB_DISPLAY_SWITCH SWSCI_FUNCTION_CODE(SWSCI_SBCB, 5)
223#define SWSCI_SBCB_SET_TV_FORMAT SWSCI_FUNCTION_CODE(SWSCI_SBCB, 6)
224#define SWSCI_SBCB_ADAPTER_POWER_STATE SWSCI_FUNCTION_CODE(SWSCI_SBCB, 7)
225#define SWSCI_SBCB_DISPLAY_POWER_STATE SWSCI_FUNCTION_CODE(SWSCI_SBCB, 8)
226#define SWSCI_SBCB_SET_BOOT_DISPLAY SWSCI_FUNCTION_CODE(SWSCI_SBCB, 9)
227#define SWSCI_SBCB_SET_PANEL_DETAILS SWSCI_FUNCTION_CODE(SWSCI_SBCB, 10)
228#define SWSCI_SBCB_SET_INTERNAL_GFX SWSCI_FUNCTION_CODE(SWSCI_SBCB, 11)
229#define SWSCI_SBCB_POST_HIRES_TO_DOS_FS SWSCI_FUNCTION_CODE(SWSCI_SBCB, 16)
230#define SWSCI_SBCB_SUSPEND_RESUME SWSCI_FUNCTION_CODE(SWSCI_SBCB, 17)
231#define SWSCI_SBCB_SET_SPREAD_SPECTRUM SWSCI_FUNCTION_CODE(SWSCI_SBCB, 18)
232#define SWSCI_SBCB_POST_VBE_PM SWSCI_FUNCTION_CODE(SWSCI_SBCB, 19)
233#define SWSCI_SBCB_ENABLE_DISABLE_AUDIO SWSCI_FUNCTION_CODE(SWSCI_SBCB, 21)
234
235/*
236 * ACPI Specification, Revision 5.0, Appendix B.3.2 _DOD (Enumerate All Devices
237 * Attached to the Display Adapter).
238 */
239#define ACPI_DISPLAY_INDEX_SHIFT 0
240#define ACPI_DISPLAY_INDEX_MASK (0xf << 0)
241#define ACPI_DISPLAY_PORT_ATTACHMENT_SHIFT 4
242#define ACPI_DISPLAY_PORT_ATTACHMENT_MASK (0xf << 4)
243#define ACPI_DISPLAY_TYPE_SHIFT 8
244#define ACPI_DISPLAY_TYPE_MASK (0xf << 8)
245#define ACPI_DISPLAY_TYPE_OTHER (0 << 8)
246#define ACPI_DISPLAY_TYPE_VGA (1 << 8)
247#define ACPI_DISPLAY_TYPE_TV (2 << 8)
248#define ACPI_DISPLAY_TYPE_EXTERNAL_DIGITAL (3 << 8)
249#define ACPI_DISPLAY_TYPE_INTERNAL_DIGITAL (4 << 8)
250#define ACPI_VENDOR_SPECIFIC_SHIFT 12
251#define ACPI_VENDOR_SPECIFIC_MASK (0xf << 12)
252#define ACPI_BIOS_CAN_DETECT (1 << 16)
253#define ACPI_DEPENDS_ON_VGA (1 << 17)
254#define ACPI_PIPE_ID_SHIFT 18
255#define ACPI_PIPE_ID_MASK (7 << 18)
256#define ACPI_DEVICE_ID_SCHEME (1 << 31)
257
258#define MAX_DSLP 1500
259
260static int swsci(struct drm_i915_private *dev_priv,
261 u32 function, u32 parm, u32 *parm_out)
262{
263 struct opregion_swsci *swsci = dev_priv->opregion.swsci;
264 struct pci_dev *pdev = dev_priv->drm.pdev;
265 u32 main_function, sub_function, scic;
266 u16 swsci_val;
267 u32 dslp;
268
269 if (!swsci)
270 return -ENODEV;
271
272 main_function = (function & SWSCI_SCIC_MAIN_FUNCTION_MASK) >>
273 SWSCI_SCIC_MAIN_FUNCTION_SHIFT;
274 sub_function = (function & SWSCI_SCIC_SUB_FUNCTION_MASK) >>
275 SWSCI_SCIC_SUB_FUNCTION_SHIFT;
276
277 /* Check if we can call the function. See swsci_setup for details. */
278 if (main_function == SWSCI_SBCB) {
279 if ((dev_priv->opregion.swsci_sbcb_sub_functions &
280 (1 << sub_function)) == 0)
281 return -EINVAL;
282 } else if (main_function == SWSCI_GBDA) {
283 if ((dev_priv->opregion.swsci_gbda_sub_functions &
284 (1 << sub_function)) == 0)
285 return -EINVAL;
286 }
287
288 /* Driver sleep timeout in ms. */
289 dslp = swsci->dslp;
290 if (!dslp) {
291 /* The spec says 2ms should be the default, but it's too small
292 * for some machines. */
293 dslp = 50;
294 } else if (dslp > MAX_DSLP) {
295 /* Hey bios, trust must be earned. */
296 DRM_INFO_ONCE("ACPI BIOS requests an excessive sleep of %u ms, "
297 "using %u ms instead\n", dslp, MAX_DSLP);
298 dslp = MAX_DSLP;
299 }
300
301 /* The spec tells us to do this, but we are the only user... */
302 scic = swsci->scic;
303 if (scic & SWSCI_SCIC_INDICATOR) {
304 DRM_DEBUG_DRIVER("SWSCI request already in progress\n");
305 return -EBUSY;
306 }
307
308 scic = function | SWSCI_SCIC_INDICATOR;
309
310 swsci->parm = parm;
311 swsci->scic = scic;
312
313 /* Ensure SCI event is selected and event trigger is cleared. */
314 pci_read_config_word(pdev, SWSCI, &swsci_val);
315 if (!(swsci_val & SWSCI_SCISEL) || (swsci_val & SWSCI_GSSCIE)) {
316 swsci_val |= SWSCI_SCISEL;
317 swsci_val &= ~SWSCI_GSSCIE;
318 pci_write_config_word(pdev, SWSCI, swsci_val);
319 }
320
321 /* Use event trigger to tell bios to check the mail. */
322 swsci_val |= SWSCI_GSSCIE;
323 pci_write_config_word(pdev, SWSCI, swsci_val);
324
325 /* Poll for the result. */
326#define C (((scic = swsci->scic) & SWSCI_SCIC_INDICATOR) == 0)
327 if (wait_for(C, dslp)) {
328 DRM_DEBUG_DRIVER("SWSCI request timed out\n");
329 return -ETIMEDOUT;
330 }
331
332 scic = (scic & SWSCI_SCIC_EXIT_STATUS_MASK) >>
333 SWSCI_SCIC_EXIT_STATUS_SHIFT;
334
335 /* Note: scic == 0 is an error! */
336 if (scic != SWSCI_SCIC_EXIT_STATUS_SUCCESS) {
337 DRM_DEBUG_DRIVER("SWSCI request error %u\n", scic);
338 return -EIO;
339 }
340
341 if (parm_out)
342 *parm_out = swsci->parm;
343
344 return 0;
345
346#undef C
347}
348
349#define DISPLAY_TYPE_CRT 0
350#define DISPLAY_TYPE_TV 1
351#define DISPLAY_TYPE_EXTERNAL_FLAT_PANEL 2
352#define DISPLAY_TYPE_INTERNAL_FLAT_PANEL 3
353
354int intel_opregion_notify_encoder(struct intel_encoder *intel_encoder,
355 bool enable)
356{
357 struct drm_i915_private *dev_priv = to_i915(intel_encoder->base.dev);
358 u32 parm = 0;
359 u32 type = 0;
360 u32 port;
361
362 /* don't care about old stuff for now */
363 if (!HAS_DDI(dev_priv))
364 return 0;
365
366 if (intel_encoder->type == INTEL_OUTPUT_DSI)
367 port = 0;
368 else
369 port = intel_ddi_get_encoder_port(intel_encoder);
370
371 if (port == PORT_E) {
372 port = 0;
373 } else {
374 parm |= 1 << port;
375 port++;
376 }
377
378 if (!enable)
379 parm |= 4 << 8;
380
381 switch (intel_encoder->type) {
382 case INTEL_OUTPUT_ANALOG:
383 type = DISPLAY_TYPE_CRT;
384 break;
385 case INTEL_OUTPUT_UNKNOWN:
386 case INTEL_OUTPUT_DP:
387 case INTEL_OUTPUT_HDMI:
388 case INTEL_OUTPUT_DP_MST:
389 type = DISPLAY_TYPE_EXTERNAL_FLAT_PANEL;
390 break;
391 case INTEL_OUTPUT_EDP:
392 case INTEL_OUTPUT_DSI:
393 type = DISPLAY_TYPE_INTERNAL_FLAT_PANEL;
394 break;
395 default:
396 WARN_ONCE(1, "unsupported intel_encoder type %d\n",
397 intel_encoder->type);
398 return -EINVAL;
399 }
400
401 parm |= type << (16 + port * 3);
402
403 return swsci(dev_priv, SWSCI_SBCB_DISPLAY_POWER_STATE, parm, NULL);
404}
405
406static const struct {
407 pci_power_t pci_power_state;
408 u32 parm;
409} power_state_map[] = {
410 { PCI_D0, 0x00 },
411 { PCI_D1, 0x01 },
412 { PCI_D2, 0x02 },
413 { PCI_D3hot, 0x04 },
414 { PCI_D3cold, 0x04 },
415};
416
417int intel_opregion_notify_adapter(struct drm_i915_private *dev_priv,
418 pci_power_t state)
419{
420 int i;
421
422 if (!HAS_DDI(dev_priv))
423 return 0;
424
425 for (i = 0; i < ARRAY_SIZE(power_state_map); i++) {
426 if (state == power_state_map[i].pci_power_state)
427 return swsci(dev_priv, SWSCI_SBCB_ADAPTER_POWER_STATE,
428 power_state_map[i].parm, NULL);
429 }
430
431 return -EINVAL;
432}
433
434static u32 asle_set_backlight(struct drm_i915_private *dev_priv, u32 bclp)
435{
436 struct intel_connector *connector;
437 struct opregion_asle *asle = dev_priv->opregion.asle;
438 struct drm_device *dev = &dev_priv->drm;
439
440 DRM_DEBUG_DRIVER("bclp = 0x%08x\n", bclp);
441
442 if (acpi_video_get_backlight_type() == acpi_backlight_native) {
443 DRM_DEBUG_KMS("opregion backlight request ignored\n");
444 return 0;
445 }
446
447 if (!(bclp & ASLE_BCLP_VALID))
448 return ASLC_BACKLIGHT_FAILED;
449
450 bclp &= ASLE_BCLP_MSK;
451 if (bclp > 255)
452 return ASLC_BACKLIGHT_FAILED;
453
454 drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
455
456 /*
457 * Update backlight on all connectors that support backlight (usually
458 * only one).
459 */
460 DRM_DEBUG_KMS("updating opregion backlight %d/255\n", bclp);
461 for_each_intel_connector(dev, connector)
462 intel_panel_set_backlight_acpi(connector, bclp, 255);
463 asle->cblv = DIV_ROUND_UP(bclp * 100, 255) | ASLE_CBLV_VALID;
464
465 drm_modeset_unlock(&dev->mode_config.connection_mutex);
466
467
468 return 0;
469}
470
471static u32 asle_set_als_illum(struct drm_i915_private *dev_priv, u32 alsi)
472{
473 /* alsi is the current ALS reading in lux. 0 indicates below sensor
474 range, 0xffff indicates above sensor range. 1-0xfffe are valid */
475 DRM_DEBUG_DRIVER("Illum is not supported\n");
476 return ASLC_ALS_ILLUM_FAILED;
477}
478
479static u32 asle_set_pwm_freq(struct drm_i915_private *dev_priv, u32 pfmb)
480{
481 DRM_DEBUG_DRIVER("PWM freq is not supported\n");
482 return ASLC_PWM_FREQ_FAILED;
483}
484
485static u32 asle_set_pfit(struct drm_i915_private *dev_priv, u32 pfit)
486{
487 /* Panel fitting is currently controlled by the X code, so this is a
488 noop until modesetting support works fully */
489 DRM_DEBUG_DRIVER("Pfit is not supported\n");
490 return ASLC_PFIT_FAILED;
491}
492
493static u32 asle_set_supported_rotation_angles(struct drm_i915_private *dev_priv, u32 srot)
494{
495 DRM_DEBUG_DRIVER("SROT is not supported\n");
496 return ASLC_ROTATION_ANGLES_FAILED;
497}
498
499static u32 asle_set_button_array(struct drm_i915_private *dev_priv, u32 iuer)
500{
501 if (!iuer)
502 DRM_DEBUG_DRIVER("Button array event is not supported (nothing)\n");
503 if (iuer & ASLE_IUER_ROTATION_LOCK_BTN)
504 DRM_DEBUG_DRIVER("Button array event is not supported (rotation lock)\n");
505 if (iuer & ASLE_IUER_VOLUME_DOWN_BTN)
506 DRM_DEBUG_DRIVER("Button array event is not supported (volume down)\n");
507 if (iuer & ASLE_IUER_VOLUME_UP_BTN)
508 DRM_DEBUG_DRIVER("Button array event is not supported (volume up)\n");
509 if (iuer & ASLE_IUER_WINDOWS_BTN)
510 DRM_DEBUG_DRIVER("Button array event is not supported (windows)\n");
511 if (iuer & ASLE_IUER_POWER_BTN)
512 DRM_DEBUG_DRIVER("Button array event is not supported (power)\n");
513
514 return ASLC_BUTTON_ARRAY_FAILED;
515}
516
517static u32 asle_set_convertible(struct drm_i915_private *dev_priv, u32 iuer)
518{
519 if (iuer & ASLE_IUER_CONVERTIBLE)
520 DRM_DEBUG_DRIVER("Convertible is not supported (clamshell)\n");
521 else
522 DRM_DEBUG_DRIVER("Convertible is not supported (slate)\n");
523
524 return ASLC_CONVERTIBLE_FAILED;
525}
526
527static u32 asle_set_docking(struct drm_i915_private *dev_priv, u32 iuer)
528{
529 if (iuer & ASLE_IUER_DOCKING)
530 DRM_DEBUG_DRIVER("Docking is not supported (docked)\n");
531 else
532 DRM_DEBUG_DRIVER("Docking is not supported (undocked)\n");
533
534 return ASLC_DOCKING_FAILED;
535}
536
537static u32 asle_isct_state(struct drm_i915_private *dev_priv)
538{
539 DRM_DEBUG_DRIVER("ISCT is not supported\n");
540 return ASLC_ISCT_STATE_FAILED;
541}
542
543static void asle_work(struct work_struct *work)
544{
545 struct intel_opregion *opregion =
546 container_of(work, struct intel_opregion, asle_work);
547 struct drm_i915_private *dev_priv =
548 container_of(opregion, struct drm_i915_private, opregion);
549 struct opregion_asle *asle = dev_priv->opregion.asle;
550 u32 aslc_stat = 0;
551 u32 aslc_req;
552
553 if (!asle)
554 return;
555
556 aslc_req = asle->aslc;
557
558 if (!(aslc_req & ASLC_REQ_MSK)) {
559 DRM_DEBUG_DRIVER("No request on ASLC interrupt 0x%08x\n",
560 aslc_req);
561 return;
562 }
563
564 if (aslc_req & ASLC_SET_ALS_ILLUM)
565 aslc_stat |= asle_set_als_illum(dev_priv, asle->alsi);
566
567 if (aslc_req & ASLC_SET_BACKLIGHT)
568 aslc_stat |= asle_set_backlight(dev_priv, asle->bclp);
569
570 if (aslc_req & ASLC_SET_PFIT)
571 aslc_stat |= asle_set_pfit(dev_priv, asle->pfit);
572
573 if (aslc_req & ASLC_SET_PWM_FREQ)
574 aslc_stat |= asle_set_pwm_freq(dev_priv, asle->pfmb);
575
576 if (aslc_req & ASLC_SUPPORTED_ROTATION_ANGLES)
577 aslc_stat |= asle_set_supported_rotation_angles(dev_priv,
578 asle->srot);
579
580 if (aslc_req & ASLC_BUTTON_ARRAY)
581 aslc_stat |= asle_set_button_array(dev_priv, asle->iuer);
582
583 if (aslc_req & ASLC_CONVERTIBLE_INDICATOR)
584 aslc_stat |= asle_set_convertible(dev_priv, asle->iuer);
585
586 if (aslc_req & ASLC_DOCKING_INDICATOR)
587 aslc_stat |= asle_set_docking(dev_priv, asle->iuer);
588
589 if (aslc_req & ASLC_ISCT_STATE_CHANGE)
590 aslc_stat |= asle_isct_state(dev_priv);
591
592 asle->aslc = aslc_stat;
593}
594
595void intel_opregion_asle_intr(struct drm_i915_private *dev_priv)
596{
597 if (dev_priv->opregion.asle)
598 schedule_work(&dev_priv->opregion.asle_work);
599}
600
601#define ACPI_EV_DISPLAY_SWITCH (1<<0)
602#define ACPI_EV_LID (1<<1)
603#define ACPI_EV_DOCK (1<<2)
604
605static struct intel_opregion *system_opregion;
606
607static int intel_opregion_video_event(struct notifier_block *nb,
608 unsigned long val, void *data)
609{
610 /* The only video events relevant to opregion are 0x80. These indicate
611 either a docking event, lid switch or display switch request. In
612 Linux, these are handled by the dock, button and video drivers.
613 */
614
615 struct acpi_bus_event *event = data;
616 struct opregion_acpi *acpi;
617 int ret = NOTIFY_OK;
618
619 if (strcmp(event->device_class, ACPI_VIDEO_CLASS) != 0)
620 return NOTIFY_DONE;
621
622 if (!system_opregion)
623 return NOTIFY_DONE;
624
625 acpi = system_opregion->acpi;
626
627 if (event->type == 0x80 && ((acpi->cevt & 1) == 0))
628 ret = NOTIFY_BAD;
629
630 acpi->csts = 0;
631
632 return ret;
633}
634
635static struct notifier_block intel_opregion_notifier = {
636 .notifier_call = intel_opregion_video_event,
637};
638
639/*
640 * Initialise the DIDL field in opregion. This passes a list of devices to
641 * the firmware. Values are defined by section B.4.2 of the ACPI specification
642 * (version 3)
643 */
644
645static void set_did(struct intel_opregion *opregion, int i, u32 val)
646{
647 if (i < ARRAY_SIZE(opregion->acpi->didl)) {
648 opregion->acpi->didl[i] = val;
649 } else {
650 i -= ARRAY_SIZE(opregion->acpi->didl);
651
652 if (WARN_ON(i >= ARRAY_SIZE(opregion->acpi->did2)))
653 return;
654
655 opregion->acpi->did2[i] = val;
656 }
657}
658
659static u32 acpi_display_type(struct intel_connector *connector)
660{
661 u32 display_type;
662
663 switch (connector->base.connector_type) {
664 case DRM_MODE_CONNECTOR_VGA:
665 case DRM_MODE_CONNECTOR_DVIA:
666 display_type = ACPI_DISPLAY_TYPE_VGA;
667 break;
668 case DRM_MODE_CONNECTOR_Composite:
669 case DRM_MODE_CONNECTOR_SVIDEO:
670 case DRM_MODE_CONNECTOR_Component:
671 case DRM_MODE_CONNECTOR_9PinDIN:
672 case DRM_MODE_CONNECTOR_TV:
673 display_type = ACPI_DISPLAY_TYPE_TV;
674 break;
675 case DRM_MODE_CONNECTOR_DVII:
676 case DRM_MODE_CONNECTOR_DVID:
677 case DRM_MODE_CONNECTOR_DisplayPort:
678 case DRM_MODE_CONNECTOR_HDMIA:
679 case DRM_MODE_CONNECTOR_HDMIB:
680 display_type = ACPI_DISPLAY_TYPE_EXTERNAL_DIGITAL;
681 break;
682 case DRM_MODE_CONNECTOR_LVDS:
683 case DRM_MODE_CONNECTOR_eDP:
684 case DRM_MODE_CONNECTOR_DSI:
685 display_type = ACPI_DISPLAY_TYPE_INTERNAL_DIGITAL;
686 break;
687 case DRM_MODE_CONNECTOR_Unknown:
688 case DRM_MODE_CONNECTOR_VIRTUAL:
689 display_type = ACPI_DISPLAY_TYPE_OTHER;
690 break;
691 default:
692 MISSING_CASE(connector->base.connector_type);
693 display_type = ACPI_DISPLAY_TYPE_OTHER;
694 break;
695 }
696
697 return display_type;
698}
699
700static void intel_didl_outputs(struct drm_i915_private *dev_priv)
701{
702 struct intel_opregion *opregion = &dev_priv->opregion;
703 struct intel_connector *connector;
704 int i = 0, max_outputs;
705 int display_index[16] = {};
706
707 /*
708 * In theory, did2, the extended didl, gets added at opregion version
709 * 3.0. In practice, however, we're supposed to set it for earlier
710 * versions as well, since a BIOS that doesn't understand did2 should
711 * not look at it anyway. Use a variable so we can tweak this if a need
712 * arises later.
713 */
714 max_outputs = ARRAY_SIZE(opregion->acpi->didl) +
715 ARRAY_SIZE(opregion->acpi->did2);
716
717 for_each_intel_connector(&dev_priv->drm, connector) {
718 u32 device_id, type;
719
720 device_id = acpi_display_type(connector);
721
722 /* Use display type specific display index. */
723 type = (device_id & ACPI_DISPLAY_TYPE_MASK)
724 >> ACPI_DISPLAY_TYPE_SHIFT;
725 device_id |= display_index[type]++ << ACPI_DISPLAY_INDEX_SHIFT;
726
727 connector->acpi_device_id = device_id;
728 if (i < max_outputs)
729 set_did(opregion, i, device_id);
730 i++;
731 }
732
733 DRM_DEBUG_KMS("%d outputs detected\n", i);
734
735 if (i > max_outputs)
736 DRM_ERROR("More than %d outputs in connector list\n",
737 max_outputs);
738
739 /* If fewer than max outputs, the list must be null terminated */
740 if (i < max_outputs)
741 set_did(opregion, i, 0);
742}
743
744static void intel_setup_cadls(struct drm_i915_private *dev_priv)
745{
746 struct intel_opregion *opregion = &dev_priv->opregion;
747 struct intel_connector *connector;
748 int i = 0;
749
750 /*
751 * Initialize the CADL field from the connector device ids. This is
752 * essentially the same as copying from the DIDL. Technically, this is
753 * not always correct as display outputs may exist, but not active. This
754 * initialization is necessary for some Clevo laptops that check this
755 * field before processing the brightness and display switching hotkeys.
756 *
757 * Note that internal panels should be at the front of the connector
758 * list already, ensuring they're not left out.
759 */
760 for_each_intel_connector(&dev_priv->drm, connector) {
761 if (i >= ARRAY_SIZE(opregion->acpi->cadl))
762 break;
763 opregion->acpi->cadl[i++] = connector->acpi_device_id;
764 }
765
766 /* If fewer than 8 active devices, the list must be null terminated */
767 if (i < ARRAY_SIZE(opregion->acpi->cadl))
768 opregion->acpi->cadl[i] = 0;
769}
770
771void intel_opregion_register(struct drm_i915_private *dev_priv)
772{
773 struct intel_opregion *opregion = &dev_priv->opregion;
774
775 if (!opregion->header)
776 return;
777
778 if (opregion->acpi) {
779 intel_didl_outputs(dev_priv);
780 intel_setup_cadls(dev_priv);
781
782 /* Notify BIOS we are ready to handle ACPI video ext notifs.
783 * Right now, all the events are handled by the ACPI video module.
784 * We don't actually need to do anything with them. */
785 opregion->acpi->csts = 0;
786 opregion->acpi->drdy = 1;
787
788 system_opregion = opregion;
789 register_acpi_notifier(&intel_opregion_notifier);
790 }
791
792 if (opregion->asle) {
793 opregion->asle->tche = ASLE_TCHE_BLC_EN;
794 opregion->asle->ardy = ASLE_ARDY_READY;
795 }
796}
797
798void intel_opregion_unregister(struct drm_i915_private *dev_priv)
799{
800 struct intel_opregion *opregion = &dev_priv->opregion;
801
802 if (!opregion->header)
803 return;
804
805 if (opregion->asle)
806 opregion->asle->ardy = ASLE_ARDY_NOT_READY;
807
808 cancel_work_sync(&dev_priv->opregion.asle_work);
809
810 if (opregion->acpi) {
811 opregion->acpi->drdy = 0;
812
813 system_opregion = NULL;
814 unregister_acpi_notifier(&intel_opregion_notifier);
815 }
816
817 /* just clear all opregion memory pointers now */
818 memunmap(opregion->header);
819 if (opregion->rvda) {
820 memunmap(opregion->rvda);
821 opregion->rvda = NULL;
822 }
823 opregion->header = NULL;
824 opregion->acpi = NULL;
825 opregion->swsci = NULL;
826 opregion->asle = NULL;
827 opregion->vbt = NULL;
828 opregion->lid_state = NULL;
829}
830
831static void swsci_setup(struct drm_i915_private *dev_priv)
832{
833 struct intel_opregion *opregion = &dev_priv->opregion;
834 bool requested_callbacks = false;
835 u32 tmp;
836
837 /* Sub-function code 0 is okay, let's allow them. */
838 opregion->swsci_gbda_sub_functions = 1;
839 opregion->swsci_sbcb_sub_functions = 1;
840
841 /* We use GBDA to ask for supported GBDA calls. */
842 if (swsci(dev_priv, SWSCI_GBDA_SUPPORTED_CALLS, 0, &tmp) == 0) {
843 /* make the bits match the sub-function codes */
844 tmp <<= 1;
845 opregion->swsci_gbda_sub_functions |= tmp;
846 }
847
848 /*
849 * We also use GBDA to ask for _requested_ SBCB callbacks. The driver
850 * must not call interfaces that are not specifically requested by the
851 * bios.
852 */
853 if (swsci(dev_priv, SWSCI_GBDA_REQUESTED_CALLBACKS, 0, &tmp) == 0) {
854 /* here, the bits already match sub-function codes */
855 opregion->swsci_sbcb_sub_functions |= tmp;
856 requested_callbacks = true;
857 }
858
859 /*
860 * But we use SBCB to ask for _supported_ SBCB calls. This does not mean
861 * the callback is _requested_. But we still can't call interfaces that
862 * are not requested.
863 */
864 if (swsci(dev_priv, SWSCI_SBCB_SUPPORTED_CALLBACKS, 0, &tmp) == 0) {
865 /* make the bits match the sub-function codes */
866 u32 low = tmp & 0x7ff;
867 u32 high = tmp & ~0xfff; /* bit 11 is reserved */
868 tmp = (high << 4) | (low << 1) | 1;
869
870 /* best guess what to do with supported wrt requested */
871 if (requested_callbacks) {
872 u32 req = opregion->swsci_sbcb_sub_functions;
873 if ((req & tmp) != req)
874 DRM_DEBUG_DRIVER("SWSCI BIOS requested (%08x) SBCB callbacks that are not supported (%08x)\n", req, tmp);
875 /* XXX: for now, trust the requested callbacks */
876 /* opregion->swsci_sbcb_sub_functions &= tmp; */
877 } else {
878 opregion->swsci_sbcb_sub_functions |= tmp;
879 }
880 }
881
882 DRM_DEBUG_DRIVER("SWSCI GBDA callbacks %08x, SBCB callbacks %08x\n",
883 opregion->swsci_gbda_sub_functions,
884 opregion->swsci_sbcb_sub_functions);
885}
886
887static int intel_no_opregion_vbt_callback(const struct dmi_system_id *id)
888{
889 DRM_DEBUG_KMS("Falling back to manually reading VBT from "
890 "VBIOS ROM for %s\n", id->ident);
891 return 1;
892}
893
894static const struct dmi_system_id intel_no_opregion_vbt[] = {
895 {
896 .callback = intel_no_opregion_vbt_callback,
897 .ident = "ThinkCentre A57",
898 .matches = {
899 DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
900 DMI_MATCH(DMI_PRODUCT_NAME, "97027RG"),
901 },
902 },
903 { }
904};
905
906int intel_opregion_setup(struct drm_i915_private *dev_priv)
907{
908 struct intel_opregion *opregion = &dev_priv->opregion;
909 struct pci_dev *pdev = dev_priv->drm.pdev;
910 u32 asls, mboxes;
911 char buf[sizeof(OPREGION_SIGNATURE)];
912 int err = 0;
913 void *base;
914
915 BUILD_BUG_ON(sizeof(struct opregion_header) != 0x100);
916 BUILD_BUG_ON(sizeof(struct opregion_acpi) != 0x100);
917 BUILD_BUG_ON(sizeof(struct opregion_swsci) != 0x100);
918 BUILD_BUG_ON(sizeof(struct opregion_asle) != 0x100);
919 BUILD_BUG_ON(sizeof(struct opregion_asle_ext) != 0x400);
920
921 pci_read_config_dword(pdev, ASLS, &asls);
922 DRM_DEBUG_DRIVER("graphic opregion physical addr: 0x%x\n", asls);
923 if (asls == 0) {
924 DRM_DEBUG_DRIVER("ACPI OpRegion not supported!\n");
925 return -ENOTSUPP;
926 }
927
928 INIT_WORK(&opregion->asle_work, asle_work);
929
930 base = memremap(asls, OPREGION_SIZE, MEMREMAP_WB);
931 if (!base)
932 return -ENOMEM;
933
934 memcpy(buf, base, sizeof(buf));
935
936 if (memcmp(buf, OPREGION_SIGNATURE, 16)) {
937 DRM_DEBUG_DRIVER("opregion signature mismatch\n");
938 err = -EINVAL;
939 goto err_out;
940 }
941 opregion->header = base;
942 opregion->lid_state = base + ACPI_CLID;
943
944 mboxes = opregion->header->mboxes;
945 if (mboxes & MBOX_ACPI) {
946 DRM_DEBUG_DRIVER("Public ACPI methods supported\n");
947 opregion->acpi = base + OPREGION_ACPI_OFFSET;
948 }
949
950 if (mboxes & MBOX_SWSCI) {
951 DRM_DEBUG_DRIVER("SWSCI supported\n");
952 opregion->swsci = base + OPREGION_SWSCI_OFFSET;
953 swsci_setup(dev_priv);
954 }
955
956 if (mboxes & MBOX_ASLE) {
957 DRM_DEBUG_DRIVER("ASLE supported\n");
958 opregion->asle = base + OPREGION_ASLE_OFFSET;
959
960 opregion->asle->ardy = ASLE_ARDY_NOT_READY;
961 }
962
963 if (mboxes & MBOX_ASLE_EXT)
964 DRM_DEBUG_DRIVER("ASLE extension supported\n");
965
966 if (!dmi_check_system(intel_no_opregion_vbt)) {
967 const void *vbt = NULL;
968 u32 vbt_size = 0;
969
970 if (opregion->header->opregion_ver >= 2 && opregion->asle &&
971 opregion->asle->rvda && opregion->asle->rvds) {
972 opregion->rvda = memremap(opregion->asle->rvda,
973 opregion->asle->rvds,
974 MEMREMAP_WB);
975 vbt = opregion->rvda;
976 vbt_size = opregion->asle->rvds;
977 }
978
979 if (intel_bios_is_valid_vbt(vbt, vbt_size)) {
980 DRM_DEBUG_KMS("Found valid VBT in ACPI OpRegion (RVDA)\n");
981 opregion->vbt = vbt;
982 opregion->vbt_size = vbt_size;
983 } else {
984 vbt = base + OPREGION_VBT_OFFSET;
985 /*
986 * The VBT specification says that if the ASLE ext
987 * mailbox is not used its area is reserved, but
988 * on some CHT boards the VBT extends into the
989 * ASLE ext area. Allow this even though it is
990 * against the spec, so we do not end up rejecting
991 * the VBT on those boards (and end up not finding the
992 * LCD panel because of this).
993 */
994 vbt_size = (mboxes & MBOX_ASLE_EXT) ?
995 OPREGION_ASLE_EXT_OFFSET : OPREGION_SIZE;
996 vbt_size -= OPREGION_VBT_OFFSET;
997 if (intel_bios_is_valid_vbt(vbt, vbt_size)) {
998 DRM_DEBUG_KMS("Found valid VBT in ACPI OpRegion (Mailbox #4)\n");
999 opregion->vbt = vbt;
1000 opregion->vbt_size = vbt_size;
1001 }
1002 }
1003 }
1004
1005 return 0;
1006
1007err_out:
1008 memunmap(base);
1009 return err;
1010}
1011
1012static int intel_use_opregion_panel_type_callback(const struct dmi_system_id *id)
1013{
1014 DRM_INFO("Using panel type from OpRegion on %s\n", id->ident);
1015 return 1;
1016}
1017
1018static const struct dmi_system_id intel_use_opregion_panel_type[] = {
1019 {
1020 .callback = intel_use_opregion_panel_type_callback,
1021 .ident = "Conrac GmbH IX45GM2",
1022 .matches = {DMI_MATCH(DMI_SYS_VENDOR, "Conrac GmbH"),
1023 DMI_MATCH(DMI_PRODUCT_NAME, "IX45GM2"),
1024 },
1025 },
1026 { }
1027};
1028
1029int
1030intel_opregion_get_panel_type(struct drm_i915_private *dev_priv)
1031{
1032 u32 panel_details;
1033 int ret;
1034
1035 ret = swsci(dev_priv, SWSCI_GBDA_PANEL_DETAILS, 0x0, &panel_details);
1036 if (ret) {
1037 DRM_DEBUG_KMS("Failed to get panel details from OpRegion (%d)\n",
1038 ret);
1039 return ret;
1040 }
1041
1042 ret = (panel_details >> 8) & 0xff;
1043 if (ret > 0x10) {
1044 DRM_DEBUG_KMS("Invalid OpRegion panel type 0x%x\n", ret);
1045 return -EINVAL;
1046 }
1047
1048 /* fall back to VBT panel type? */
1049 if (ret == 0x0) {
1050 DRM_DEBUG_KMS("No panel type in OpRegion\n");
1051 return -ENODEV;
1052 }
1053
1054 /*
1055 * So far we know that some machined must use it, others must not use it.
1056 * There doesn't seem to be any way to determine which way to go, except
1057 * via a quirk list :(
1058 */
1059 if (!dmi_check_system(intel_use_opregion_panel_type)) {
1060 DRM_DEBUG_KMS("Ignoring OpRegion panel type (%d)\n", ret - 1);
1061 return -ENODEV;
1062 }
1063
1064 /*
1065 * FIXME On Dell XPS 13 9350 the OpRegion panel type (0) gives us
1066 * low vswing for eDP, whereas the VBT panel type (2) gives us normal
1067 * vswing instead. Low vswing results in some display flickers, so
1068 * let's simply ignore the OpRegion panel type on SKL for now.
1069 */
1070 if (IS_SKYLAKE(dev_priv)) {
1071 DRM_DEBUG_KMS("Ignoring OpRegion panel type (%d)\n", ret - 1);
1072 return -ENODEV;
1073 }
1074
1075 return ret - 1;
1076}