Loading...
1/*
2 * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
3 *
4 * Licensed under the terms of the GNU GPL License version 2.
5 *
6 * Library for common functions for Intel SpeedStep v.1 and v.2 support
7 *
8 * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
9 */
10
11#include <linux/kernel.h>
12#include <linux/module.h>
13#include <linux/moduleparam.h>
14#include <linux/init.h>
15#include <linux/cpufreq.h>
16
17#include <asm/msr.h>
18#include <asm/tsc.h>
19#include "speedstep-lib.h"
20
21#define PFX "speedstep-lib: "
22
23#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK
24static int relaxed_check;
25#else
26#define relaxed_check 0
27#endif
28
29/*********************************************************************
30 * GET PROCESSOR CORE SPEED IN KHZ *
31 *********************************************************************/
32
33static unsigned int pentium3_get_frequency(enum speedstep_processor processor)
34{
35 /* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */
36 struct {
37 unsigned int ratio; /* Frequency Multiplier (x10) */
38 u8 bitmap; /* power on configuration bits
39 [27, 25:22] (in MSR 0x2a) */
40 } msr_decode_mult[] = {
41 { 30, 0x01 },
42 { 35, 0x05 },
43 { 40, 0x02 },
44 { 45, 0x06 },
45 { 50, 0x00 },
46 { 55, 0x04 },
47 { 60, 0x0b },
48 { 65, 0x0f },
49 { 70, 0x09 },
50 { 75, 0x0d },
51 { 80, 0x0a },
52 { 85, 0x26 },
53 { 90, 0x20 },
54 { 100, 0x2b },
55 { 0, 0xff } /* error or unknown value */
56 };
57
58 /* PIII(-M) FSB settings: see table b1-b of 24547206.pdf */
59 struct {
60 unsigned int value; /* Front Side Bus speed in MHz */
61 u8 bitmap; /* power on configuration bits [18: 19]
62 (in MSR 0x2a) */
63 } msr_decode_fsb[] = {
64 { 66, 0x0 },
65 { 100, 0x2 },
66 { 133, 0x1 },
67 { 0, 0xff}
68 };
69
70 u32 msr_lo, msr_tmp;
71 int i = 0, j = 0;
72
73 /* read MSR 0x2a - we only need the low 32 bits */
74 rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
75 pr_debug("P3 - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
76 msr_tmp = msr_lo;
77
78 /* decode the FSB */
79 msr_tmp &= 0x00c0000;
80 msr_tmp >>= 18;
81 while (msr_tmp != msr_decode_fsb[i].bitmap) {
82 if (msr_decode_fsb[i].bitmap == 0xff)
83 return 0;
84 i++;
85 }
86
87 /* decode the multiplier */
88 if (processor == SPEEDSTEP_CPU_PIII_C_EARLY) {
89 pr_debug("workaround for early PIIIs\n");
90 msr_lo &= 0x03c00000;
91 } else
92 msr_lo &= 0x0bc00000;
93 msr_lo >>= 22;
94 while (msr_lo != msr_decode_mult[j].bitmap) {
95 if (msr_decode_mult[j].bitmap == 0xff)
96 return 0;
97 j++;
98 }
99
100 pr_debug("speed is %u\n",
101 (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100));
102
103 return msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100;
104}
105
106
107static unsigned int pentiumM_get_frequency(void)
108{
109 u32 msr_lo, msr_tmp;
110
111 rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
112 pr_debug("PM - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
113
114 /* see table B-2 of 24547212.pdf */
115 if (msr_lo & 0x00040000) {
116 printk(KERN_DEBUG PFX "PM - invalid FSB: 0x%x 0x%x\n",
117 msr_lo, msr_tmp);
118 return 0;
119 }
120
121 msr_tmp = (msr_lo >> 22) & 0x1f;
122 pr_debug("bits 22-26 are 0x%x, speed is %u\n",
123 msr_tmp, (msr_tmp * 100 * 1000));
124
125 return msr_tmp * 100 * 1000;
126}
127
128static unsigned int pentium_core_get_frequency(void)
129{
130 u32 fsb = 0;
131 u32 msr_lo, msr_tmp;
132 int ret;
133
134 rdmsr(MSR_FSB_FREQ, msr_lo, msr_tmp);
135 /* see table B-2 of 25366920.pdf */
136 switch (msr_lo & 0x07) {
137 case 5:
138 fsb = 100000;
139 break;
140 case 1:
141 fsb = 133333;
142 break;
143 case 3:
144 fsb = 166667;
145 break;
146 case 2:
147 fsb = 200000;
148 break;
149 case 0:
150 fsb = 266667;
151 break;
152 case 4:
153 fsb = 333333;
154 break;
155 default:
156 printk(KERN_ERR "PCORE - MSR_FSB_FREQ undefined value");
157 }
158
159 rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
160 pr_debug("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n",
161 msr_lo, msr_tmp);
162
163 msr_tmp = (msr_lo >> 22) & 0x1f;
164 pr_debug("bits 22-26 are 0x%x, speed is %u\n",
165 msr_tmp, (msr_tmp * fsb));
166
167 ret = (msr_tmp * fsb);
168 return ret;
169}
170
171
172static unsigned int pentium4_get_frequency(void)
173{
174 struct cpuinfo_x86 *c = &boot_cpu_data;
175 u32 msr_lo, msr_hi, mult;
176 unsigned int fsb = 0;
177 unsigned int ret;
178 u8 fsb_code;
179
180 /* Pentium 4 Model 0 and 1 do not have the Core Clock Frequency
181 * to System Bus Frequency Ratio Field in the Processor Frequency
182 * Configuration Register of the MSR. Therefore the current
183 * frequency cannot be calculated and has to be measured.
184 */
185 if (c->x86_model < 2)
186 return cpu_khz;
187
188 rdmsr(0x2c, msr_lo, msr_hi);
189
190 pr_debug("P4 - MSR_EBC_FREQUENCY_ID: 0x%x 0x%x\n", msr_lo, msr_hi);
191
192 /* decode the FSB: see IA-32 Intel (C) Architecture Software
193 * Developer's Manual, Volume 3: System Prgramming Guide,
194 * revision #12 in Table B-1: MSRs in the Pentium 4 and
195 * Intel Xeon Processors, on page B-4 and B-5.
196 */
197 fsb_code = (msr_lo >> 16) & 0x7;
198 switch (fsb_code) {
199 case 0:
200 fsb = 100 * 1000;
201 break;
202 case 1:
203 fsb = 13333 * 10;
204 break;
205 case 2:
206 fsb = 200 * 1000;
207 break;
208 }
209
210 if (!fsb)
211 printk(KERN_DEBUG PFX "couldn't detect FSB speed. "
212 "Please send an e-mail to <linux@brodo.de>\n");
213
214 /* Multiplier. */
215 mult = msr_lo >> 24;
216
217 pr_debug("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n",
218 fsb, mult, (fsb * mult));
219
220 ret = (fsb * mult);
221 return ret;
222}
223
224
225/* Warning: may get called from smp_call_function_single. */
226unsigned int speedstep_get_frequency(enum speedstep_processor processor)
227{
228 switch (processor) {
229 case SPEEDSTEP_CPU_PCORE:
230 return pentium_core_get_frequency();
231 case SPEEDSTEP_CPU_PM:
232 return pentiumM_get_frequency();
233 case SPEEDSTEP_CPU_P4D:
234 case SPEEDSTEP_CPU_P4M:
235 return pentium4_get_frequency();
236 case SPEEDSTEP_CPU_PIII_T:
237 case SPEEDSTEP_CPU_PIII_C:
238 case SPEEDSTEP_CPU_PIII_C_EARLY:
239 return pentium3_get_frequency(processor);
240 default:
241 return 0;
242 };
243 return 0;
244}
245EXPORT_SYMBOL_GPL(speedstep_get_frequency);
246
247
248/*********************************************************************
249 * DETECT SPEEDSTEP-CAPABLE PROCESSOR *
250 *********************************************************************/
251
252unsigned int speedstep_detect_processor(void)
253{
254 struct cpuinfo_x86 *c = &cpu_data(0);
255 u32 ebx, msr_lo, msr_hi;
256
257 pr_debug("x86: %x, model: %x\n", c->x86, c->x86_model);
258
259 if ((c->x86_vendor != X86_VENDOR_INTEL) ||
260 ((c->x86 != 6) && (c->x86 != 0xF)))
261 return 0;
262
263 if (c->x86 == 0xF) {
264 /* Intel Mobile Pentium 4-M
265 * or Intel Mobile Pentium 4 with 533 MHz FSB */
266 if (c->x86_model != 2)
267 return 0;
268
269 ebx = cpuid_ebx(0x00000001);
270 ebx &= 0x000000FF;
271
272 pr_debug("ebx value is %x, x86_mask is %x\n", ebx, c->x86_mask);
273
274 switch (c->x86_mask) {
275 case 4:
276 /*
277 * B-stepping [M-P4-M]
278 * sample has ebx = 0x0f, production has 0x0e.
279 */
280 if ((ebx == 0x0e) || (ebx == 0x0f))
281 return SPEEDSTEP_CPU_P4M;
282 break;
283 case 7:
284 /*
285 * C-stepping [M-P4-M]
286 * needs to have ebx=0x0e, else it's a celeron:
287 * cf. 25130917.pdf / page 7, footnote 5 even
288 * though 25072120.pdf / page 7 doesn't say
289 * samples are only of B-stepping...
290 */
291 if (ebx == 0x0e)
292 return SPEEDSTEP_CPU_P4M;
293 break;
294 case 9:
295 /*
296 * D-stepping [M-P4-M or M-P4/533]
297 *
298 * this is totally strange: CPUID 0x0F29 is
299 * used by M-P4-M, M-P4/533 and(!) Celeron CPUs.
300 * The latter need to be sorted out as they don't
301 * support speedstep.
302 * Celerons with CPUID 0x0F29 may have either
303 * ebx=0x8 or 0xf -- 25130917.pdf doesn't say anything
304 * specific.
305 * M-P4-Ms may have either ebx=0xe or 0xf [see above]
306 * M-P4/533 have either ebx=0xe or 0xf. [25317607.pdf]
307 * also, M-P4M HTs have ebx=0x8, too
308 * For now, they are distinguished by the model_id
309 * string
310 */
311 if ((ebx == 0x0e) ||
312 (strstr(c->x86_model_id,
313 "Mobile Intel(R) Pentium(R) 4") != NULL))
314 return SPEEDSTEP_CPU_P4M;
315 break;
316 default:
317 break;
318 }
319 return 0;
320 }
321
322 switch (c->x86_model) {
323 case 0x0B: /* Intel PIII [Tualatin] */
324 /* cpuid_ebx(1) is 0x04 for desktop PIII,
325 * 0x06 for mobile PIII-M */
326 ebx = cpuid_ebx(0x00000001);
327 pr_debug("ebx is %x\n", ebx);
328
329 ebx &= 0x000000FF;
330
331 if (ebx != 0x06)
332 return 0;
333
334 /* So far all PIII-M processors support SpeedStep. See
335 * Intel's 24540640.pdf of June 2003
336 */
337 return SPEEDSTEP_CPU_PIII_T;
338
339 case 0x08: /* Intel PIII [Coppermine] */
340
341 /* all mobile PIII Coppermines have FSB 100 MHz
342 * ==> sort out a few desktop PIIIs. */
343 rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_hi);
344 pr_debug("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n",
345 msr_lo, msr_hi);
346 msr_lo &= 0x00c0000;
347 if (msr_lo != 0x0080000)
348 return 0;
349
350 /*
351 * If the processor is a mobile version,
352 * platform ID has bit 50 set
353 * it has SpeedStep technology if either
354 * bit 56 or 57 is set
355 */
356 rdmsr(MSR_IA32_PLATFORM_ID, msr_lo, msr_hi);
357 pr_debug("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n",
358 msr_lo, msr_hi);
359 if ((msr_hi & (1<<18)) &&
360 (relaxed_check ? 1 : (msr_hi & (3<<24)))) {
361 if (c->x86_mask == 0x01) {
362 pr_debug("early PIII version\n");
363 return SPEEDSTEP_CPU_PIII_C_EARLY;
364 } else
365 return SPEEDSTEP_CPU_PIII_C;
366 }
367
368 default:
369 return 0;
370 }
371}
372EXPORT_SYMBOL_GPL(speedstep_detect_processor);
373
374
375/*********************************************************************
376 * DETECT SPEEDSTEP SPEEDS *
377 *********************************************************************/
378
379unsigned int speedstep_get_freqs(enum speedstep_processor processor,
380 unsigned int *low_speed,
381 unsigned int *high_speed,
382 unsigned int *transition_latency,
383 void (*set_state) (unsigned int state))
384{
385 unsigned int prev_speed;
386 unsigned int ret = 0;
387 unsigned long flags;
388 struct timeval tv1, tv2;
389
390 if ((!processor) || (!low_speed) || (!high_speed) || (!set_state))
391 return -EINVAL;
392
393 pr_debug("trying to determine both speeds\n");
394
395 /* get current speed */
396 prev_speed = speedstep_get_frequency(processor);
397 if (!prev_speed)
398 return -EIO;
399
400 pr_debug("previous speed is %u\n", prev_speed);
401
402 local_irq_save(flags);
403
404 /* switch to low state */
405 set_state(SPEEDSTEP_LOW);
406 *low_speed = speedstep_get_frequency(processor);
407 if (!*low_speed) {
408 ret = -EIO;
409 goto out;
410 }
411
412 pr_debug("low speed is %u\n", *low_speed);
413
414 /* start latency measurement */
415 if (transition_latency)
416 do_gettimeofday(&tv1);
417
418 /* switch to high state */
419 set_state(SPEEDSTEP_HIGH);
420
421 /* end latency measurement */
422 if (transition_latency)
423 do_gettimeofday(&tv2);
424
425 *high_speed = speedstep_get_frequency(processor);
426 if (!*high_speed) {
427 ret = -EIO;
428 goto out;
429 }
430
431 pr_debug("high speed is %u\n", *high_speed);
432
433 if (*low_speed == *high_speed) {
434 ret = -ENODEV;
435 goto out;
436 }
437
438 /* switch to previous state, if necessary */
439 if (*high_speed != prev_speed)
440 set_state(SPEEDSTEP_LOW);
441
442 if (transition_latency) {
443 *transition_latency = (tv2.tv_sec - tv1.tv_sec) * USEC_PER_SEC +
444 tv2.tv_usec - tv1.tv_usec;
445 pr_debug("transition latency is %u uSec\n", *transition_latency);
446
447 /* convert uSec to nSec and add 20% for safety reasons */
448 *transition_latency *= 1200;
449
450 /* check if the latency measurement is too high or too low
451 * and set it to a safe value (500uSec) in that case
452 */
453 if (*transition_latency > 10000000 ||
454 *transition_latency < 50000) {
455 printk(KERN_WARNING PFX "frequency transition "
456 "measured seems out of range (%u "
457 "nSec), falling back to a safe one of"
458 "%u nSec.\n",
459 *transition_latency, 500000);
460 *transition_latency = 500000;
461 }
462 }
463
464out:
465 local_irq_restore(flags);
466 return ret;
467}
468EXPORT_SYMBOL_GPL(speedstep_get_freqs);
469
470#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK
471module_param(relaxed_check, int, 0444);
472MODULE_PARM_DESC(relaxed_check,
473 "Don't do all checks for speedstep capability.");
474#endif
475
476MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>");
477MODULE_DESCRIPTION("Library for Intel SpeedStep 1 or 2 cpufreq drivers.");
478MODULE_LICENSE("GPL");
1/*
2 * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
3 *
4 * Licensed under the terms of the GNU GPL License version 2.
5 *
6 * Library for common functions for Intel SpeedStep v.1 and v.2 support
7 *
8 * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
9 */
10
11#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
12
13#include <linux/kernel.h>
14#include <linux/module.h>
15#include <linux/moduleparam.h>
16#include <linux/init.h>
17#include <linux/cpufreq.h>
18
19#include <asm/msr.h>
20#include <asm/tsc.h>
21#include "speedstep-lib.h"
22
23#define PFX "speedstep-lib: "
24
25#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK
26static int relaxed_check;
27#else
28#define relaxed_check 0
29#endif
30
31/*********************************************************************
32 * GET PROCESSOR CORE SPEED IN KHZ *
33 *********************************************************************/
34
35static unsigned int pentium3_get_frequency(enum speedstep_processor processor)
36{
37 /* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */
38 struct {
39 unsigned int ratio; /* Frequency Multiplier (x10) */
40 u8 bitmap; /* power on configuration bits
41 [27, 25:22] (in MSR 0x2a) */
42 } msr_decode_mult[] = {
43 { 30, 0x01 },
44 { 35, 0x05 },
45 { 40, 0x02 },
46 { 45, 0x06 },
47 { 50, 0x00 },
48 { 55, 0x04 },
49 { 60, 0x0b },
50 { 65, 0x0f },
51 { 70, 0x09 },
52 { 75, 0x0d },
53 { 80, 0x0a },
54 { 85, 0x26 },
55 { 90, 0x20 },
56 { 100, 0x2b },
57 { 0, 0xff } /* error or unknown value */
58 };
59
60 /* PIII(-M) FSB settings: see table b1-b of 24547206.pdf */
61 struct {
62 unsigned int value; /* Front Side Bus speed in MHz */
63 u8 bitmap; /* power on configuration bits [18: 19]
64 (in MSR 0x2a) */
65 } msr_decode_fsb[] = {
66 { 66, 0x0 },
67 { 100, 0x2 },
68 { 133, 0x1 },
69 { 0, 0xff}
70 };
71
72 u32 msr_lo, msr_tmp;
73 int i = 0, j = 0;
74
75 /* read MSR 0x2a - we only need the low 32 bits */
76 rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
77 pr_debug("P3 - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
78 msr_tmp = msr_lo;
79
80 /* decode the FSB */
81 msr_tmp &= 0x00c0000;
82 msr_tmp >>= 18;
83 while (msr_tmp != msr_decode_fsb[i].bitmap) {
84 if (msr_decode_fsb[i].bitmap == 0xff)
85 return 0;
86 i++;
87 }
88
89 /* decode the multiplier */
90 if (processor == SPEEDSTEP_CPU_PIII_C_EARLY) {
91 pr_debug("workaround for early PIIIs\n");
92 msr_lo &= 0x03c00000;
93 } else
94 msr_lo &= 0x0bc00000;
95 msr_lo >>= 22;
96 while (msr_lo != msr_decode_mult[j].bitmap) {
97 if (msr_decode_mult[j].bitmap == 0xff)
98 return 0;
99 j++;
100 }
101
102 pr_debug("speed is %u\n",
103 (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100));
104
105 return msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100;
106}
107
108
109static unsigned int pentiumM_get_frequency(void)
110{
111 u32 msr_lo, msr_tmp;
112
113 rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
114 pr_debug("PM - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
115
116 /* see table B-2 of 24547212.pdf */
117 if (msr_lo & 0x00040000) {
118 printk(KERN_DEBUG PFX "PM - invalid FSB: 0x%x 0x%x\n",
119 msr_lo, msr_tmp);
120 return 0;
121 }
122
123 msr_tmp = (msr_lo >> 22) & 0x1f;
124 pr_debug("bits 22-26 are 0x%x, speed is %u\n",
125 msr_tmp, (msr_tmp * 100 * 1000));
126
127 return msr_tmp * 100 * 1000;
128}
129
130static unsigned int pentium_core_get_frequency(void)
131{
132 u32 fsb = 0;
133 u32 msr_lo, msr_tmp;
134 int ret;
135
136 rdmsr(MSR_FSB_FREQ, msr_lo, msr_tmp);
137 /* see table B-2 of 25366920.pdf */
138 switch (msr_lo & 0x07) {
139 case 5:
140 fsb = 100000;
141 break;
142 case 1:
143 fsb = 133333;
144 break;
145 case 3:
146 fsb = 166667;
147 break;
148 case 2:
149 fsb = 200000;
150 break;
151 case 0:
152 fsb = 266667;
153 break;
154 case 4:
155 fsb = 333333;
156 break;
157 default:
158 pr_err("PCORE - MSR_FSB_FREQ undefined value\n");
159 }
160
161 rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
162 pr_debug("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n",
163 msr_lo, msr_tmp);
164
165 msr_tmp = (msr_lo >> 22) & 0x1f;
166 pr_debug("bits 22-26 are 0x%x, speed is %u\n",
167 msr_tmp, (msr_tmp * fsb));
168
169 ret = (msr_tmp * fsb);
170 return ret;
171}
172
173
174static unsigned int pentium4_get_frequency(void)
175{
176 struct cpuinfo_x86 *c = &boot_cpu_data;
177 u32 msr_lo, msr_hi, mult;
178 unsigned int fsb = 0;
179 unsigned int ret;
180 u8 fsb_code;
181
182 /* Pentium 4 Model 0 and 1 do not have the Core Clock Frequency
183 * to System Bus Frequency Ratio Field in the Processor Frequency
184 * Configuration Register of the MSR. Therefore the current
185 * frequency cannot be calculated and has to be measured.
186 */
187 if (c->x86_model < 2)
188 return cpu_khz;
189
190 rdmsr(0x2c, msr_lo, msr_hi);
191
192 pr_debug("P4 - MSR_EBC_FREQUENCY_ID: 0x%x 0x%x\n", msr_lo, msr_hi);
193
194 /* decode the FSB: see IA-32 Intel (C) Architecture Software
195 * Developer's Manual, Volume 3: System Prgramming Guide,
196 * revision #12 in Table B-1: MSRs in the Pentium 4 and
197 * Intel Xeon Processors, on page B-4 and B-5.
198 */
199 fsb_code = (msr_lo >> 16) & 0x7;
200 switch (fsb_code) {
201 case 0:
202 fsb = 100 * 1000;
203 break;
204 case 1:
205 fsb = 13333 * 10;
206 break;
207 case 2:
208 fsb = 200 * 1000;
209 break;
210 }
211
212 if (!fsb)
213 printk(KERN_DEBUG PFX "couldn't detect FSB speed. "
214 "Please send an e-mail to <linux@brodo.de>\n");
215
216 /* Multiplier. */
217 mult = msr_lo >> 24;
218
219 pr_debug("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n",
220 fsb, mult, (fsb * mult));
221
222 ret = (fsb * mult);
223 return ret;
224}
225
226
227/* Warning: may get called from smp_call_function_single. */
228unsigned int speedstep_get_frequency(enum speedstep_processor processor)
229{
230 switch (processor) {
231 case SPEEDSTEP_CPU_PCORE:
232 return pentium_core_get_frequency();
233 case SPEEDSTEP_CPU_PM:
234 return pentiumM_get_frequency();
235 case SPEEDSTEP_CPU_P4D:
236 case SPEEDSTEP_CPU_P4M:
237 return pentium4_get_frequency();
238 case SPEEDSTEP_CPU_PIII_T:
239 case SPEEDSTEP_CPU_PIII_C:
240 case SPEEDSTEP_CPU_PIII_C_EARLY:
241 return pentium3_get_frequency(processor);
242 default:
243 return 0;
244 };
245 return 0;
246}
247EXPORT_SYMBOL_GPL(speedstep_get_frequency);
248
249
250/*********************************************************************
251 * DETECT SPEEDSTEP-CAPABLE PROCESSOR *
252 *********************************************************************/
253
254/* Keep in sync with the x86_cpu_id tables in the different modules */
255unsigned int speedstep_detect_processor(void)
256{
257 struct cpuinfo_x86 *c = &cpu_data(0);
258 u32 ebx, msr_lo, msr_hi;
259
260 pr_debug("x86: %x, model: %x\n", c->x86, c->x86_model);
261
262 if ((c->x86_vendor != X86_VENDOR_INTEL) ||
263 ((c->x86 != 6) && (c->x86 != 0xF)))
264 return 0;
265
266 if (c->x86 == 0xF) {
267 /* Intel Mobile Pentium 4-M
268 * or Intel Mobile Pentium 4 with 533 MHz FSB */
269 if (c->x86_model != 2)
270 return 0;
271
272 ebx = cpuid_ebx(0x00000001);
273 ebx &= 0x000000FF;
274
275 pr_debug("ebx value is %x, x86_mask is %x\n", ebx, c->x86_mask);
276
277 switch (c->x86_mask) {
278 case 4:
279 /*
280 * B-stepping [M-P4-M]
281 * sample has ebx = 0x0f, production has 0x0e.
282 */
283 if ((ebx == 0x0e) || (ebx == 0x0f))
284 return SPEEDSTEP_CPU_P4M;
285 break;
286 case 7:
287 /*
288 * C-stepping [M-P4-M]
289 * needs to have ebx=0x0e, else it's a celeron:
290 * cf. 25130917.pdf / page 7, footnote 5 even
291 * though 25072120.pdf / page 7 doesn't say
292 * samples are only of B-stepping...
293 */
294 if (ebx == 0x0e)
295 return SPEEDSTEP_CPU_P4M;
296 break;
297 case 9:
298 /*
299 * D-stepping [M-P4-M or M-P4/533]
300 *
301 * this is totally strange: CPUID 0x0F29 is
302 * used by M-P4-M, M-P4/533 and(!) Celeron CPUs.
303 * The latter need to be sorted out as they don't
304 * support speedstep.
305 * Celerons with CPUID 0x0F29 may have either
306 * ebx=0x8 or 0xf -- 25130917.pdf doesn't say anything
307 * specific.
308 * M-P4-Ms may have either ebx=0xe or 0xf [see above]
309 * M-P4/533 have either ebx=0xe or 0xf. [25317607.pdf]
310 * also, M-P4M HTs have ebx=0x8, too
311 * For now, they are distinguished by the model_id
312 * string
313 */
314 if ((ebx == 0x0e) ||
315 (strstr(c->x86_model_id,
316 "Mobile Intel(R) Pentium(R) 4") != NULL))
317 return SPEEDSTEP_CPU_P4M;
318 break;
319 default:
320 break;
321 }
322 return 0;
323 }
324
325 switch (c->x86_model) {
326 case 0x0B: /* Intel PIII [Tualatin] */
327 /* cpuid_ebx(1) is 0x04 for desktop PIII,
328 * 0x06 for mobile PIII-M */
329 ebx = cpuid_ebx(0x00000001);
330 pr_debug("ebx is %x\n", ebx);
331
332 ebx &= 0x000000FF;
333
334 if (ebx != 0x06)
335 return 0;
336
337 /* So far all PIII-M processors support SpeedStep. See
338 * Intel's 24540640.pdf of June 2003
339 */
340 return SPEEDSTEP_CPU_PIII_T;
341
342 case 0x08: /* Intel PIII [Coppermine] */
343
344 /* all mobile PIII Coppermines have FSB 100 MHz
345 * ==> sort out a few desktop PIIIs. */
346 rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_hi);
347 pr_debug("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n",
348 msr_lo, msr_hi);
349 msr_lo &= 0x00c0000;
350 if (msr_lo != 0x0080000)
351 return 0;
352
353 /*
354 * If the processor is a mobile version,
355 * platform ID has bit 50 set
356 * it has SpeedStep technology if either
357 * bit 56 or 57 is set
358 */
359 rdmsr(MSR_IA32_PLATFORM_ID, msr_lo, msr_hi);
360 pr_debug("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n",
361 msr_lo, msr_hi);
362 if ((msr_hi & (1<<18)) &&
363 (relaxed_check ? 1 : (msr_hi & (3<<24)))) {
364 if (c->x86_mask == 0x01) {
365 pr_debug("early PIII version\n");
366 return SPEEDSTEP_CPU_PIII_C_EARLY;
367 } else
368 return SPEEDSTEP_CPU_PIII_C;
369 }
370
371 default:
372 return 0;
373 }
374}
375EXPORT_SYMBOL_GPL(speedstep_detect_processor);
376
377
378/*********************************************************************
379 * DETECT SPEEDSTEP SPEEDS *
380 *********************************************************************/
381
382unsigned int speedstep_get_freqs(enum speedstep_processor processor,
383 unsigned int *low_speed,
384 unsigned int *high_speed,
385 unsigned int *transition_latency,
386 void (*set_state) (unsigned int state))
387{
388 unsigned int prev_speed;
389 unsigned int ret = 0;
390 unsigned long flags;
391 ktime_t tv1, tv2;
392
393 if ((!processor) || (!low_speed) || (!high_speed) || (!set_state))
394 return -EINVAL;
395
396 pr_debug("trying to determine both speeds\n");
397
398 /* get current speed */
399 prev_speed = speedstep_get_frequency(processor);
400 if (!prev_speed)
401 return -EIO;
402
403 pr_debug("previous speed is %u\n", prev_speed);
404
405 preempt_disable();
406 local_irq_save(flags);
407
408 /* switch to low state */
409 set_state(SPEEDSTEP_LOW);
410 *low_speed = speedstep_get_frequency(processor);
411 if (!*low_speed) {
412 ret = -EIO;
413 goto out;
414 }
415
416 pr_debug("low speed is %u\n", *low_speed);
417
418 /* start latency measurement */
419 if (transition_latency)
420 tv1 = ktime_get();
421
422 /* switch to high state */
423 set_state(SPEEDSTEP_HIGH);
424
425 /* end latency measurement */
426 if (transition_latency)
427 tv2 = ktime_get();
428
429 *high_speed = speedstep_get_frequency(processor);
430 if (!*high_speed) {
431 ret = -EIO;
432 goto out;
433 }
434
435 pr_debug("high speed is %u\n", *high_speed);
436
437 if (*low_speed == *high_speed) {
438 ret = -ENODEV;
439 goto out;
440 }
441
442 /* switch to previous state, if necessary */
443 if (*high_speed != prev_speed)
444 set_state(SPEEDSTEP_LOW);
445
446 if (transition_latency) {
447 *transition_latency = ktime_to_us(ktime_sub(tv2, tv1));
448 pr_debug("transition latency is %u uSec\n", *transition_latency);
449
450 /* convert uSec to nSec and add 20% for safety reasons */
451 *transition_latency *= 1200;
452
453 /* check if the latency measurement is too high or too low
454 * and set it to a safe value (500uSec) in that case
455 */
456 if (*transition_latency > 10000000 ||
457 *transition_latency < 50000) {
458 pr_warn("frequency transition measured seems out of range (%u nSec), falling back to a safe one of %u nSec\n",
459 *transition_latency, 500000);
460 *transition_latency = 500000;
461 }
462 }
463
464out:
465 local_irq_restore(flags);
466 preempt_enable();
467
468 return ret;
469}
470EXPORT_SYMBOL_GPL(speedstep_get_freqs);
471
472#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK
473module_param(relaxed_check, int, 0444);
474MODULE_PARM_DESC(relaxed_check,
475 "Don't do all checks for speedstep capability.");
476#endif
477
478MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>");
479MODULE_DESCRIPTION("Library for Intel SpeedStep 1 or 2 cpufreq drivers.");
480MODULE_LICENSE("GPL");