Loading...
1
2menu "Bluetooth device drivers"
3 depends on BT
4
5config BT_HCIBTUSB
6 tristate "HCI USB driver"
7 depends on USB
8 help
9 Bluetooth HCI USB driver.
10 This driver is required if you want to use Bluetooth devices with
11 USB interface.
12
13 Say Y here to compile support for Bluetooth USB devices into the
14 kernel or say M to compile it as module (btusb).
15
16config BT_HCIBTSDIO
17 tristate "HCI SDIO driver"
18 depends on MMC
19 help
20 Bluetooth HCI SDIO driver.
21 This driver is required if you want to use Bluetooth device with
22 SDIO interface.
23
24 Say Y here to compile support for Bluetooth SDIO devices into the
25 kernel or say M to compile it as module (btsdio).
26
27config BT_HCIUART
28 tristate "HCI UART driver"
29 help
30 Bluetooth HCI UART driver.
31 This driver is required if you want to use Bluetooth devices with
32 serial port interface. You will also need this driver if you have
33 UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
34 adapter and BrainBoxes Bluetooth PC Card.
35
36 Say Y here to compile support for Bluetooth UART devices into the
37 kernel or say M to compile it as module (hci_uart).
38
39config BT_HCIUART_H4
40 bool "UART (H4) protocol support"
41 depends on BT_HCIUART
42 help
43 UART (H4) is serial protocol for communication between Bluetooth
44 device and host. This protocol is required for most Bluetooth devices
45 with UART interface, including PCMCIA and CF cards.
46
47 Say Y here to compile support for HCI UART (H4) protocol.
48
49config BT_HCIUART_BCSP
50 bool "BCSP protocol support"
51 depends on BT_HCIUART
52 select BITREVERSE
53 help
54 BCSP (BlueCore Serial Protocol) is serial protocol for communication
55 between Bluetooth device and host. This protocol is required for non
56 USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
57 CF cards.
58
59 Say Y here to compile support for HCI BCSP protocol.
60
61config BT_HCIUART_ATH3K
62 bool "Atheros AR300x serial support"
63 depends on BT_HCIUART
64 help
65 HCIATH3K (HCI Atheros AR300x) is a serial protocol for
66 communication between host and Atheros AR300x Bluetooth devices.
67 This protocol enables AR300x chips to be enabled with
68 power management support.
69 Enable this if you have Atheros AR300x serial Bluetooth device.
70
71 Say Y here to compile support for HCI UART ATH3K protocol.
72
73config BT_HCIUART_LL
74 bool "HCILL protocol support"
75 depends on BT_HCIUART
76 help
77 HCILL (HCI Low Level) is a serial protocol for communication
78 between Bluetooth device and host. This protocol is required for
79 serial Bluetooth devices that are based on Texas Instruments'
80 BRF chips.
81
82 Say Y here to compile support for HCILL protocol.
83
84config BT_HCIBCM203X
85 tristate "HCI BCM203x USB driver"
86 depends on USB
87 select FW_LOADER
88 help
89 Bluetooth HCI BCM203x USB driver.
90 This driver provides the firmware loading mechanism for the Broadcom
91 Blutonium based devices.
92
93 Say Y here to compile support for HCI BCM203x devices into the
94 kernel or say M to compile it as module (bcm203x).
95
96config BT_HCIBPA10X
97 tristate "HCI BPA10x USB driver"
98 depends on USB
99 help
100 Bluetooth HCI BPA10x USB driver.
101 This driver provides support for the Digianswer BPA 100/105 Bluetooth
102 sniffer devices.
103
104 Say Y here to compile support for HCI BPA10x devices into the
105 kernel or say M to compile it as module (bpa10x).
106
107config BT_HCIBFUSB
108 tristate "HCI BlueFRITZ! USB driver"
109 depends on USB
110 select FW_LOADER
111 help
112 Bluetooth HCI BlueFRITZ! USB driver.
113 This driver provides support for Bluetooth USB devices with AVM
114 interface:
115 AVM BlueFRITZ! USB
116
117 Say Y here to compile support for HCI BFUSB devices into the
118 kernel or say M to compile it as module (bfusb).
119
120config BT_HCIDTL1
121 tristate "HCI DTL1 (PC Card) driver"
122 depends on PCMCIA
123 help
124 Bluetooth HCI DTL1 (PC Card) driver.
125 This driver provides support for Bluetooth PCMCIA devices with
126 Nokia DTL1 interface:
127 Nokia Bluetooth Card
128 Socket Bluetooth CF Card
129
130 Say Y here to compile support for HCI DTL1 devices into the
131 kernel or say M to compile it as module (dtl1_cs).
132
133config BT_HCIBT3C
134 tristate "HCI BT3C (PC Card) driver"
135 depends on PCMCIA
136 select FW_LOADER
137 help
138 Bluetooth HCI BT3C (PC Card) driver.
139 This driver provides support for Bluetooth PCMCIA devices with
140 3Com BT3C interface:
141 3Com Bluetooth Card (3CRWB6096)
142 HP Bluetooth Card
143
144 Say Y here to compile support for HCI BT3C devices into the
145 kernel or say M to compile it as module (bt3c_cs).
146
147config BT_HCIBLUECARD
148 tristate "HCI BlueCard (PC Card) driver"
149 depends on PCMCIA
150 help
151 Bluetooth HCI BlueCard (PC Card) driver.
152 This driver provides support for Bluetooth PCMCIA devices with
153 Anycom BlueCard interface:
154 Anycom Bluetooth PC Card
155 Anycom Bluetooth CF Card
156
157 Say Y here to compile support for HCI BlueCard devices into the
158 kernel or say M to compile it as module (bluecard_cs).
159
160config BT_HCIBTUART
161 tristate "HCI UART (PC Card) device driver"
162 depends on PCMCIA
163 help
164 Bluetooth HCI UART (PC Card) driver.
165 This driver provides support for Bluetooth PCMCIA devices with
166 an UART interface:
167 Xircom CreditCard Bluetooth Adapter
168 Xircom RealPort2 Bluetooth Adapter
169 Sphinx PICO Card
170 H-Soft blue+Card
171 Cyber-blue Compact Flash Card
172
173 Say Y here to compile support for HCI UART devices into the
174 kernel or say M to compile it as module (btuart_cs).
175
176config BT_HCIVHCI
177 tristate "HCI VHCI (Virtual HCI device) driver"
178 help
179 Bluetooth Virtual HCI device driver.
180 This driver is required if you want to use HCI Emulation software.
181
182 Say Y here to compile support for virtual HCI devices into the
183 kernel or say M to compile it as module (hci_vhci).
184
185config BT_MRVL
186 tristate "Marvell Bluetooth driver support"
187 help
188 The core driver to support Marvell Bluetooth devices.
189
190 This driver is required if you want to support
191 Marvell Bluetooth devices, such as 8688/8787.
192
193 Say Y here to compile Marvell Bluetooth driver
194 into the kernel or say M to compile it as module.
195
196config BT_MRVL_SDIO
197 tristate "Marvell BT-over-SDIO driver"
198 depends on BT_MRVL && MMC
199 select FW_LOADER
200 help
201 The driver for Marvell Bluetooth chipsets with SDIO interface.
202
203 This driver is required if you want to use Marvell Bluetooth
204 devices with SDIO interface. Currently SD8688/SD8787 chipsets are
205 supported.
206
207 Say Y here to compile support for Marvell BT-over-SDIO driver
208 into the kernel or say M to compile it as module.
209
210config BT_ATH3K
211 tristate "Atheros firmware download driver"
212 depends on BT_HCIBTUSB
213 select FW_LOADER
214 help
215 Bluetooth firmware download driver.
216 This driver loads the firmware into the Atheros Bluetooth
217 chipset.
218
219 Say Y here to compile support for "Atheros firmware download driver"
220 into the kernel or say M to compile it as module (ath3k).
221
222config BT_WILINK
223 tristate "Texas Instruments WiLink7 driver"
224 depends on TI_ST
225 help
226 This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS
227 combo devices. This makes use of shared transport line discipline
228 core driver to communicate with the BT core of the combo chip.
229
230 Say Y here to compile support for Texas Instrument's WiLink7 driver
231 into the kernel or say M to compile it as module.
232endmenu
1
2menu "Bluetooth device drivers"
3 depends on BT
4
5config BT_INTEL
6 tristate
7 select REGMAP
8
9config BT_BCM
10 tristate
11 select FW_LOADER
12
13config BT_RTL
14 tristate
15 select FW_LOADER
16
17config BT_QCA
18 tristate
19 select FW_LOADER
20
21config BT_HCIBTUSB
22 tristate "HCI USB driver"
23 depends on USB
24 select BT_INTEL
25 help
26 Bluetooth HCI USB driver.
27 This driver is required if you want to use Bluetooth devices with
28 USB interface.
29
30 Say Y here to compile support for Bluetooth USB devices into the
31 kernel or say M to compile it as module (btusb).
32
33config BT_HCIBTUSB_BCM
34 bool "Broadcom protocol support"
35 depends on BT_HCIBTUSB
36 select BT_BCM
37 default y
38 help
39 The Broadcom protocol support enables firmware and patchram
40 download support for Broadcom Bluetooth controllers.
41
42 Say Y here to compile support for Broadcom protocol.
43
44config BT_HCIBTUSB_RTL
45 bool "Realtek protocol support"
46 depends on BT_HCIBTUSB
47 select BT_RTL
48 default y
49 help
50 The Realtek protocol support enables firmware and configuration
51 download support for Realtek Bluetooth controllers.
52
53 Say Y here to compile support for Realtek protocol.
54
55config BT_HCIBTSDIO
56 tristate "HCI SDIO driver"
57 depends on MMC
58 help
59 Bluetooth HCI SDIO driver.
60 This driver is required if you want to use Bluetooth device with
61 SDIO interface.
62
63 Say Y here to compile support for Bluetooth SDIO devices into the
64 kernel or say M to compile it as module (btsdio).
65
66config BT_HCIUART
67 tristate "HCI UART driver"
68 depends on TTY
69 help
70 Bluetooth HCI UART driver.
71 This driver is required if you want to use Bluetooth devices with
72 serial port interface. You will also need this driver if you have
73 UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
74 adapter and BrainBoxes Bluetooth PC Card.
75
76 Say Y here to compile support for Bluetooth UART devices into the
77 kernel or say M to compile it as module (hci_uart).
78
79config BT_HCIUART_H4
80 bool "UART (H4) protocol support"
81 depends on BT_HCIUART
82 help
83 UART (H4) is serial protocol for communication between Bluetooth
84 device and host. This protocol is required for most Bluetooth devices
85 with UART interface, including PCMCIA and CF cards.
86
87 Say Y here to compile support for HCI UART (H4) protocol.
88
89config BT_HCIUART_BCSP
90 bool "BCSP protocol support"
91 depends on BT_HCIUART
92 select BITREVERSE
93 help
94 BCSP (BlueCore Serial Protocol) is serial protocol for communication
95 between Bluetooth device and host. This protocol is required for non
96 USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
97 CF cards.
98
99 Say Y here to compile support for HCI BCSP protocol.
100
101config BT_HCIUART_ATH3K
102 bool "Atheros AR300x serial support"
103 depends on BT_HCIUART
104 select BT_HCIUART_H4
105 help
106 HCIATH3K (HCI Atheros AR300x) is a serial protocol for
107 communication between host and Atheros AR300x Bluetooth devices.
108 This protocol enables AR300x chips to be enabled with
109 power management support.
110 Enable this if you have Atheros AR300x serial Bluetooth device.
111
112 Say Y here to compile support for HCI UART ATH3K protocol.
113
114config BT_HCIUART_LL
115 bool "HCILL protocol support"
116 depends on BT_HCIUART
117 help
118 HCILL (HCI Low Level) is a serial protocol for communication
119 between Bluetooth device and host. This protocol is required for
120 serial Bluetooth devices that are based on Texas Instruments'
121 BRF chips.
122
123 Say Y here to compile support for HCILL protocol.
124
125config BT_HCIUART_3WIRE
126 bool "Three-wire UART (H5) protocol support"
127 depends on BT_HCIUART
128 help
129 The HCI Three-wire UART Transport Layer makes it possible to
130 user the Bluetooth HCI over a serial port interface. The HCI
131 Three-wire UART Transport Layer assumes that the UART
132 communication may have bit errors, overrun errors or burst
133 errors and thereby making CTS/RTS lines unnecessary.
134
135 Say Y here to compile support for Three-wire UART protocol.
136
137config BT_HCIUART_INTEL
138 bool "Intel protocol support"
139 depends on BT_HCIUART
140 select BT_HCIUART_H4
141 select BT_INTEL
142 help
143 The Intel protocol support enables Bluetooth HCI over serial
144 port interface for Intel Bluetooth controllers.
145
146 Say Y here to compile support for Intel protocol.
147
148config BT_HCIUART_BCM
149 bool "Broadcom protocol support"
150 depends on BT_HCIUART
151 select BT_HCIUART_H4
152 select BT_BCM
153 help
154 The Broadcom protocol support enables Bluetooth HCI over serial
155 port interface for Broadcom Bluetooth controllers.
156
157 Say Y here to compile support for Broadcom protocol.
158
159config BT_HCIUART_QCA
160 bool "Qualcomm Atheros protocol support"
161 depends on BT_HCIUART
162 select BT_HCIUART_H4
163 select BT_QCA
164 help
165 The Qualcomm Atheros protocol supports HCI In-Band Sleep feature
166 over serial port interface(H4) between controller and host.
167 This protocol is required for UART clock control for QCA Bluetooth
168 devices.
169
170 Say Y here to compile support for QCA protocol.
171
172config BT_HCIUART_AG6XX
173 bool "Intel AG6XX protocol support"
174 depends on BT_HCIUART
175 select BT_HCIUART_H4
176 select BT_INTEL
177 help
178 The Intel/AG6XX protocol support enables Bluetooth HCI over serial
179 port interface for Intel ibt 2.1 Bluetooth controllers.
180
181 Say Y here to compile support for Intel AG6XX protocol.
182
183config BT_HCIUART_MRVL
184 bool "Marvell protocol support"
185 depends on BT_HCIUART
186 select BT_HCIUART_H4
187 help
188 Marvell is serial protocol for communication between Bluetooth
189 device and host. This protocol is required for most Marvell Bluetooth
190 devices with UART interface.
191
192 Say Y here to compile support for HCI MRVL protocol.
193
194config BT_HCIBCM203X
195 tristate "HCI BCM203x USB driver"
196 depends on USB
197 select FW_LOADER
198 help
199 Bluetooth HCI BCM203x USB driver.
200 This driver provides the firmware loading mechanism for the Broadcom
201 Blutonium based devices.
202
203 Say Y here to compile support for HCI BCM203x devices into the
204 kernel or say M to compile it as module (bcm203x).
205
206config BT_HCIBPA10X
207 tristate "HCI BPA10x USB driver"
208 depends on USB && BT_HCIUART
209 select BT_HCIUART_H4
210 help
211 Bluetooth HCI BPA10x USB driver.
212 This driver provides support for the Digianswer BPA 100/105 Bluetooth
213 sniffer devices.
214
215 Say Y here to compile support for HCI BPA10x devices into the
216 kernel or say M to compile it as module (bpa10x).
217
218config BT_HCIBFUSB
219 tristate "HCI BlueFRITZ! USB driver"
220 depends on USB
221 select FW_LOADER
222 help
223 Bluetooth HCI BlueFRITZ! USB driver.
224 This driver provides support for Bluetooth USB devices with AVM
225 interface:
226 AVM BlueFRITZ! USB
227
228 Say Y here to compile support for HCI BFUSB devices into the
229 kernel or say M to compile it as module (bfusb).
230
231config BT_HCIDTL1
232 tristate "HCI DTL1 (PC Card) driver"
233 depends on PCMCIA
234 help
235 Bluetooth HCI DTL1 (PC Card) driver.
236 This driver provides support for Bluetooth PCMCIA devices with
237 Nokia DTL1 interface:
238 Nokia Bluetooth Card
239 Socket Bluetooth CF Card
240
241 Say Y here to compile support for HCI DTL1 devices into the
242 kernel or say M to compile it as module (dtl1_cs).
243
244config BT_HCIBT3C
245 tristate "HCI BT3C (PC Card) driver"
246 depends on PCMCIA
247 select FW_LOADER
248 help
249 Bluetooth HCI BT3C (PC Card) driver.
250 This driver provides support for Bluetooth PCMCIA devices with
251 3Com BT3C interface:
252 3Com Bluetooth Card (3CRWB6096)
253 HP Bluetooth Card
254
255 Say Y here to compile support for HCI BT3C devices into the
256 kernel or say M to compile it as module (bt3c_cs).
257
258config BT_HCIBLUECARD
259 tristate "HCI BlueCard (PC Card) driver"
260 depends on PCMCIA
261 help
262 Bluetooth HCI BlueCard (PC Card) driver.
263 This driver provides support for Bluetooth PCMCIA devices with
264 Anycom BlueCard interface:
265 Anycom Bluetooth PC Card
266 Anycom Bluetooth CF Card
267
268 Say Y here to compile support for HCI BlueCard devices into the
269 kernel or say M to compile it as module (bluecard_cs).
270
271config BT_HCIBTUART
272 tristate "HCI UART (PC Card) device driver"
273 depends on PCMCIA
274 help
275 Bluetooth HCI UART (PC Card) driver.
276 This driver provides support for Bluetooth PCMCIA devices with
277 an UART interface:
278 Xircom CreditCard Bluetooth Adapter
279 Xircom RealPort2 Bluetooth Adapter
280 Sphinx PICO Card
281 H-Soft blue+Card
282 Cyber-blue Compact Flash Card
283
284 Say Y here to compile support for HCI UART devices into the
285 kernel or say M to compile it as module (btuart_cs).
286
287config BT_HCIVHCI
288 tristate "HCI VHCI (Virtual HCI device) driver"
289 help
290 Bluetooth Virtual HCI device driver.
291 This driver is required if you want to use HCI Emulation software.
292
293 Say Y here to compile support for virtual HCI devices into the
294 kernel or say M to compile it as module (hci_vhci).
295
296config BT_MRVL
297 tristate "Marvell Bluetooth driver support"
298 help
299 The core driver to support Marvell Bluetooth devices.
300
301 This driver is required if you want to support
302 Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8997.
303
304 Say Y here to compile Marvell Bluetooth driver
305 into the kernel or say M to compile it as module.
306
307config BT_MRVL_SDIO
308 tristate "Marvell BT-over-SDIO driver"
309 depends on BT_MRVL && MMC
310 select FW_LOADER
311 select WANT_DEV_COREDUMP
312 help
313 The driver for Marvell Bluetooth chipsets with SDIO interface.
314
315 This driver is required if you want to use Marvell Bluetooth
316 devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8997
317 chipsets are supported.
318
319 Say Y here to compile support for Marvell BT-over-SDIO driver
320 into the kernel or say M to compile it as module.
321
322config BT_ATH3K
323 tristate "Atheros firmware download driver"
324 depends on BT_HCIBTUSB
325 select FW_LOADER
326 help
327 Bluetooth firmware download driver.
328 This driver loads the firmware into the Atheros Bluetooth
329 chipset.
330
331 Say Y here to compile support for "Atheros firmware download driver"
332 into the kernel or say M to compile it as module (ath3k).
333
334config BT_WILINK
335 tristate "Texas Instruments WiLink7 driver"
336 depends on TI_ST
337 help
338 This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS
339 combo devices. This makes use of shared transport line discipline
340 core driver to communicate with the BT core of the combo chip.
341
342 Say Y here to compile support for Texas Instrument's WiLink7 driver
343 into the kernel or say M to compile it as module (btwilink).
344
345config BT_QCOMSMD
346 tristate "Qualcomm SMD based HCI support"
347 depends on QCOM_SMD && QCOM_WCNSS_CTRL
348 select BT_QCA
349 help
350 Qualcomm SMD based HCI driver.
351 This driver is used to bridge HCI data onto the shared memory
352 channels to the WCNSS core.
353
354 Say Y here to compile support for HCI over Qualcomm SMD into the
355 kernel or say M to compile as a module.
356
357endmenu