Loading...
1/*******************************************************************************
2 *
3 * Module Name: utdelete - object deletion and reference count utilities
4 *
5 ******************************************************************************/
6
7/*
8 * Copyright (C) 2000 - 2011, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44#include <acpi/acpi.h>
45#include "accommon.h"
46#include "acinterp.h"
47#include "acnamesp.h"
48#include "acevents.h"
49
50#define _COMPONENT ACPI_UTILITIES
51ACPI_MODULE_NAME("utdelete")
52
53/* Local prototypes */
54static void acpi_ut_delete_internal_obj(union acpi_operand_object *object);
55
56static void
57acpi_ut_update_ref_count(union acpi_operand_object *object, u32 action);
58
59/*******************************************************************************
60 *
61 * FUNCTION: acpi_ut_delete_internal_obj
62 *
63 * PARAMETERS: Object - Object to be deleted
64 *
65 * RETURN: None
66 *
67 * DESCRIPTION: Low level object deletion, after reference counts have been
68 * updated (All reference counts, including sub-objects!)
69 *
70 ******************************************************************************/
71
72static void acpi_ut_delete_internal_obj(union acpi_operand_object *object)
73{
74 void *obj_pointer = NULL;
75 union acpi_operand_object *handler_desc;
76 union acpi_operand_object *second_desc;
77 union acpi_operand_object *next_desc;
78 union acpi_operand_object **last_obj_ptr;
79
80 ACPI_FUNCTION_TRACE_PTR(ut_delete_internal_obj, object);
81
82 if (!object) {
83 return_VOID;
84 }
85
86 /*
87 * Must delete or free any pointers within the object that are not
88 * actual ACPI objects (for example, a raw buffer pointer).
89 */
90 switch (object->common.type) {
91 case ACPI_TYPE_STRING:
92
93 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
94 "**** String %p, ptr %p\n", object,
95 object->string.pointer));
96
97 /* Free the actual string buffer */
98
99 if (!(object->common.flags & AOPOBJ_STATIC_POINTER)) {
100
101 /* But only if it is NOT a pointer into an ACPI table */
102
103 obj_pointer = object->string.pointer;
104 }
105 break;
106
107 case ACPI_TYPE_BUFFER:
108
109 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
110 "**** Buffer %p, ptr %p\n", object,
111 object->buffer.pointer));
112
113 /* Free the actual buffer */
114
115 if (!(object->common.flags & AOPOBJ_STATIC_POINTER)) {
116
117 /* But only if it is NOT a pointer into an ACPI table */
118
119 obj_pointer = object->buffer.pointer;
120 }
121 break;
122
123 case ACPI_TYPE_PACKAGE:
124
125 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
126 " **** Package of count %X\n",
127 object->package.count));
128
129 /*
130 * Elements of the package are not handled here, they are deleted
131 * separately
132 */
133
134 /* Free the (variable length) element pointer array */
135
136 obj_pointer = object->package.elements;
137 break;
138
139 /*
140 * These objects have a possible list of notify handlers.
141 * Device object also may have a GPE block.
142 */
143 case ACPI_TYPE_DEVICE:
144
145 if (object->device.gpe_block) {
146 (void)acpi_ev_delete_gpe_block(object->device.
147 gpe_block);
148 }
149
150 /*lint -fallthrough */
151
152 case ACPI_TYPE_PROCESSOR:
153 case ACPI_TYPE_THERMAL:
154
155 /* Walk the notify handler list for this object */
156
157 handler_desc = object->common_notify.handler;
158 while (handler_desc) {
159 next_desc = handler_desc->address_space.next;
160 acpi_ut_remove_reference(handler_desc);
161 handler_desc = next_desc;
162 }
163 break;
164
165 case ACPI_TYPE_MUTEX:
166
167 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
168 "***** Mutex %p, OS Mutex %p\n",
169 object, object->mutex.os_mutex));
170
171 if (object == acpi_gbl_global_lock_mutex) {
172
173 /* Global Lock has extra semaphore */
174
175 (void)
176 acpi_os_delete_semaphore
177 (acpi_gbl_global_lock_semaphore);
178 acpi_gbl_global_lock_semaphore = NULL;
179
180 acpi_os_delete_mutex(object->mutex.os_mutex);
181 acpi_gbl_global_lock_mutex = NULL;
182 } else {
183 acpi_ex_unlink_mutex(object);
184 acpi_os_delete_mutex(object->mutex.os_mutex);
185 }
186 break;
187
188 case ACPI_TYPE_EVENT:
189
190 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
191 "***** Event %p, OS Semaphore %p\n",
192 object, object->event.os_semaphore));
193
194 (void)acpi_os_delete_semaphore(object->event.os_semaphore);
195 object->event.os_semaphore = NULL;
196 break;
197
198 case ACPI_TYPE_METHOD:
199
200 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
201 "***** Method %p\n", object));
202
203 /* Delete the method mutex if it exists */
204
205 if (object->method.mutex) {
206 acpi_os_delete_mutex(object->method.mutex->mutex.
207 os_mutex);
208 acpi_ut_delete_object_desc(object->method.mutex);
209 object->method.mutex = NULL;
210 }
211 break;
212
213 case ACPI_TYPE_REGION:
214
215 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
216 "***** Region %p\n", object));
217
218 /* Invalidate the region address/length via the host OS */
219
220 acpi_os_invalidate_address(object->region.space_id,
221 object->region.address,
222 (acpi_size) object->region.length);
223
224 second_desc = acpi_ns_get_secondary_object(object);
225 if (second_desc) {
226 /*
227 * Free the region_context if and only if the handler is one of the
228 * default handlers -- and therefore, we created the context object
229 * locally, it was not created by an external caller.
230 */
231 handler_desc = object->region.handler;
232 if (handler_desc) {
233 next_desc =
234 handler_desc->address_space.region_list;
235 last_obj_ptr =
236 &handler_desc->address_space.region_list;
237
238 /* Remove the region object from the handler's list */
239
240 while (next_desc) {
241 if (next_desc == object) {
242 *last_obj_ptr =
243 next_desc->region.next;
244 break;
245 }
246
247 /* Walk the linked list of handler */
248
249 last_obj_ptr = &next_desc->region.next;
250 next_desc = next_desc->region.next;
251 }
252
253 if (handler_desc->address_space.handler_flags &
254 ACPI_ADDR_HANDLER_DEFAULT_INSTALLED) {
255
256 /* Deactivate region and free region context */
257
258 if (handler_desc->address_space.setup) {
259 (void)handler_desc->
260 address_space.setup(object,
261 ACPI_REGION_DEACTIVATE,
262 handler_desc->
263 address_space.
264 context,
265 &second_desc->
266 extra.
267 region_context);
268 }
269 }
270
271 acpi_ut_remove_reference(handler_desc);
272 }
273
274 /* Now we can free the Extra object */
275
276 acpi_ut_delete_object_desc(second_desc);
277 }
278 break;
279
280 case ACPI_TYPE_BUFFER_FIELD:
281
282 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
283 "***** Buffer Field %p\n", object));
284
285 second_desc = acpi_ns_get_secondary_object(object);
286 if (second_desc) {
287 acpi_ut_delete_object_desc(second_desc);
288 }
289 break;
290
291 case ACPI_TYPE_LOCAL_BANK_FIELD:
292
293 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
294 "***** Bank Field %p\n", object));
295
296 second_desc = acpi_ns_get_secondary_object(object);
297 if (second_desc) {
298 acpi_ut_delete_object_desc(second_desc);
299 }
300 break;
301
302 default:
303 break;
304 }
305
306 /* Free any allocated memory (pointer within the object) found above */
307
308 if (obj_pointer) {
309 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
310 "Deleting Object Subptr %p\n", obj_pointer));
311 ACPI_FREE(obj_pointer);
312 }
313
314 /* Now the object can be safely deleted */
315
316 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS, "Deleting Object %p [%s]\n",
317 object, acpi_ut_get_object_type_name(object)));
318
319 acpi_ut_delete_object_desc(object);
320 return_VOID;
321}
322
323/*******************************************************************************
324 *
325 * FUNCTION: acpi_ut_delete_internal_object_list
326 *
327 * PARAMETERS: obj_list - Pointer to the list to be deleted
328 *
329 * RETURN: None
330 *
331 * DESCRIPTION: This function deletes an internal object list, including both
332 * simple objects and package objects
333 *
334 ******************************************************************************/
335
336void acpi_ut_delete_internal_object_list(union acpi_operand_object **obj_list)
337{
338 union acpi_operand_object **internal_obj;
339
340 ACPI_FUNCTION_TRACE(ut_delete_internal_object_list);
341
342 /* Walk the null-terminated internal list */
343
344 for (internal_obj = obj_list; *internal_obj; internal_obj++) {
345 acpi_ut_remove_reference(*internal_obj);
346 }
347
348 /* Free the combined parameter pointer list and object array */
349
350 ACPI_FREE(obj_list);
351 return_VOID;
352}
353
354/*******************************************************************************
355 *
356 * FUNCTION: acpi_ut_update_ref_count
357 *
358 * PARAMETERS: Object - Object whose ref count is to be updated
359 * Action - What to do
360 *
361 * RETURN: New ref count
362 *
363 * DESCRIPTION: Modify the ref count and return it.
364 *
365 ******************************************************************************/
366
367static void
368acpi_ut_update_ref_count(union acpi_operand_object *object, u32 action)
369{
370 u16 count;
371 u16 new_count;
372
373 ACPI_FUNCTION_NAME(ut_update_ref_count);
374
375 if (!object) {
376 return;
377 }
378
379 count = object->common.reference_count;
380 new_count = count;
381
382 /*
383 * Perform the reference count action (increment, decrement, force delete)
384 */
385 switch (action) {
386 case REF_INCREMENT:
387
388 new_count++;
389 object->common.reference_count = new_count;
390
391 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
392 "Obj %p Refs=%X, [Incremented]\n",
393 object, new_count));
394 break;
395
396 case REF_DECREMENT:
397
398 if (count < 1) {
399 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
400 "Obj %p Refs=%X, can't decrement! (Set to 0)\n",
401 object, new_count));
402
403 new_count = 0;
404 } else {
405 new_count--;
406
407 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
408 "Obj %p Refs=%X, [Decremented]\n",
409 object, new_count));
410 }
411
412 if (object->common.type == ACPI_TYPE_METHOD) {
413 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
414 "Method Obj %p Refs=%X, [Decremented]\n",
415 object, new_count));
416 }
417
418 object->common.reference_count = new_count;
419 if (new_count == 0) {
420 acpi_ut_delete_internal_obj(object);
421 }
422 break;
423
424 case REF_FORCE_DELETE:
425
426 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
427 "Obj %p Refs=%X, Force delete! (Set to 0)\n",
428 object, count));
429
430 new_count = 0;
431 object->common.reference_count = new_count;
432 acpi_ut_delete_internal_obj(object);
433 break;
434
435 default:
436
437 ACPI_ERROR((AE_INFO, "Unknown action (0x%X)", action));
438 break;
439 }
440
441 /*
442 * Sanity check the reference count, for debug purposes only.
443 * (A deleted object will have a huge reference count)
444 */
445 if (count > ACPI_MAX_REFERENCE_COUNT) {
446 ACPI_WARNING((AE_INFO,
447 "Large Reference Count (0x%X) in object %p",
448 count, object));
449 }
450}
451
452/*******************************************************************************
453 *
454 * FUNCTION: acpi_ut_update_object_reference
455 *
456 * PARAMETERS: Object - Increment ref count for this object
457 * and all sub-objects
458 * Action - Either REF_INCREMENT or REF_DECREMENT or
459 * REF_FORCE_DELETE
460 *
461 * RETURN: Status
462 *
463 * DESCRIPTION: Increment the object reference count
464 *
465 * Object references are incremented when:
466 * 1) An object is attached to a Node (namespace object)
467 * 2) An object is copied (all subobjects must be incremented)
468 *
469 * Object references are decremented when:
470 * 1) An object is detached from an Node
471 *
472 ******************************************************************************/
473
474acpi_status
475acpi_ut_update_object_reference(union acpi_operand_object *object, u16 action)
476{
477 acpi_status status = AE_OK;
478 union acpi_generic_state *state_list = NULL;
479 union acpi_operand_object *next_object = NULL;
480 union acpi_generic_state *state;
481 u32 i;
482
483 ACPI_FUNCTION_TRACE_PTR(ut_update_object_reference, object);
484
485 while (object) {
486
487 /* Make sure that this isn't a namespace handle */
488
489 if (ACPI_GET_DESCRIPTOR_TYPE(object) == ACPI_DESC_TYPE_NAMED) {
490 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
491 "Object %p is NS handle\n", object));
492 return_ACPI_STATUS(AE_OK);
493 }
494
495 /*
496 * All sub-objects must have their reference count incremented also.
497 * Different object types have different subobjects.
498 */
499 switch (object->common.type) {
500 case ACPI_TYPE_DEVICE:
501 case ACPI_TYPE_PROCESSOR:
502 case ACPI_TYPE_POWER:
503 case ACPI_TYPE_THERMAL:
504
505 /* Update the notify objects for these types (if present) */
506
507 acpi_ut_update_ref_count(object->common_notify.
508 system_notify, action);
509 acpi_ut_update_ref_count(object->common_notify.
510 device_notify, action);
511 break;
512
513 case ACPI_TYPE_PACKAGE:
514 /*
515 * We must update all the sub-objects of the package,
516 * each of whom may have their own sub-objects.
517 */
518 for (i = 0; i < object->package.count; i++) {
519 /*
520 * Push each element onto the stack for later processing.
521 * Note: There can be null elements within the package,
522 * these are simply ignored
523 */
524 status =
525 acpi_ut_create_update_state_and_push
526 (object->package.elements[i], action,
527 &state_list);
528 if (ACPI_FAILURE(status)) {
529 goto error_exit;
530 }
531 }
532 break;
533
534 case ACPI_TYPE_BUFFER_FIELD:
535
536 next_object = object->buffer_field.buffer_obj;
537 break;
538
539 case ACPI_TYPE_LOCAL_REGION_FIELD:
540
541 next_object = object->field.region_obj;
542 break;
543
544 case ACPI_TYPE_LOCAL_BANK_FIELD:
545
546 next_object = object->bank_field.bank_obj;
547 status =
548 acpi_ut_create_update_state_and_push(object->
549 bank_field.
550 region_obj,
551 action,
552 &state_list);
553 if (ACPI_FAILURE(status)) {
554 goto error_exit;
555 }
556 break;
557
558 case ACPI_TYPE_LOCAL_INDEX_FIELD:
559
560 next_object = object->index_field.index_obj;
561 status =
562 acpi_ut_create_update_state_and_push(object->
563 index_field.
564 data_obj,
565 action,
566 &state_list);
567 if (ACPI_FAILURE(status)) {
568 goto error_exit;
569 }
570 break;
571
572 case ACPI_TYPE_LOCAL_REFERENCE:
573 /*
574 * The target of an Index (a package, string, or buffer) or a named
575 * reference must track changes to the ref count of the index or
576 * target object.
577 */
578 if ((object->reference.class == ACPI_REFCLASS_INDEX) ||
579 (object->reference.class == ACPI_REFCLASS_NAME)) {
580 next_object = object->reference.object;
581 }
582 break;
583
584 case ACPI_TYPE_REGION:
585 default:
586 break; /* No subobjects for all other types */
587 }
588
589 /*
590 * Now we can update the count in the main object. This can only
591 * happen after we update the sub-objects in case this causes the
592 * main object to be deleted.
593 */
594 acpi_ut_update_ref_count(object, action);
595 object = NULL;
596
597 /* Move on to the next object to be updated */
598
599 if (next_object) {
600 object = next_object;
601 next_object = NULL;
602 } else if (state_list) {
603 state = acpi_ut_pop_generic_state(&state_list);
604 object = state->update.object;
605 acpi_ut_delete_generic_state(state);
606 }
607 }
608
609 return_ACPI_STATUS(AE_OK);
610
611 error_exit:
612
613 ACPI_EXCEPTION((AE_INFO, status,
614 "Could not update object reference count"));
615
616 /* Free any stacked Update State objects */
617
618 while (state_list) {
619 state = acpi_ut_pop_generic_state(&state_list);
620 acpi_ut_delete_generic_state(state);
621 }
622
623 return_ACPI_STATUS(status);
624}
625
626/*******************************************************************************
627 *
628 * FUNCTION: acpi_ut_add_reference
629 *
630 * PARAMETERS: Object - Object whose reference count is to be
631 * incremented
632 *
633 * RETURN: None
634 *
635 * DESCRIPTION: Add one reference to an ACPI object
636 *
637 ******************************************************************************/
638
639void acpi_ut_add_reference(union acpi_operand_object *object)
640{
641
642 ACPI_FUNCTION_TRACE_PTR(ut_add_reference, object);
643
644 /* Ensure that we have a valid object */
645
646 if (!acpi_ut_valid_internal_object(object)) {
647 return_VOID;
648 }
649
650 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
651 "Obj %p Current Refs=%X [To Be Incremented]\n",
652 object, object->common.reference_count));
653
654 /* Increment the reference count */
655
656 (void)acpi_ut_update_object_reference(object, REF_INCREMENT);
657 return_VOID;
658}
659
660/*******************************************************************************
661 *
662 * FUNCTION: acpi_ut_remove_reference
663 *
664 * PARAMETERS: Object - Object whose ref count will be decremented
665 *
666 * RETURN: None
667 *
668 * DESCRIPTION: Decrement the reference count of an ACPI internal object
669 *
670 ******************************************************************************/
671
672void acpi_ut_remove_reference(union acpi_operand_object *object)
673{
674
675 ACPI_FUNCTION_TRACE_PTR(ut_remove_reference, object);
676
677 /*
678 * Allow a NULL pointer to be passed in, just ignore it. This saves
679 * each caller from having to check. Also, ignore NS nodes.
680 *
681 */
682 if (!object ||
683 (ACPI_GET_DESCRIPTOR_TYPE(object) == ACPI_DESC_TYPE_NAMED)) {
684 return_VOID;
685 }
686
687 /* Ensure that we have a valid object */
688
689 if (!acpi_ut_valid_internal_object(object)) {
690 return_VOID;
691 }
692
693 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
694 "Obj %p Current Refs=%X [To Be Decremented]\n",
695 object, object->common.reference_count));
696
697 /*
698 * Decrement the reference count, and only actually delete the object
699 * if the reference count becomes 0. (Must also decrement the ref count
700 * of all subobjects!)
701 */
702 (void)acpi_ut_update_object_reference(object, REF_DECREMENT);
703 return_VOID;
704}
1/*******************************************************************************
2 *
3 * Module Name: utdelete - object deletion and reference count utilities
4 *
5 ******************************************************************************/
6
7/*
8 * Copyright (C) 2000 - 2016, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44#include <acpi/acpi.h>
45#include "accommon.h"
46#include "acinterp.h"
47#include "acnamesp.h"
48#include "acevents.h"
49
50#define _COMPONENT ACPI_UTILITIES
51ACPI_MODULE_NAME("utdelete")
52
53/* Local prototypes */
54static void acpi_ut_delete_internal_obj(union acpi_operand_object *object);
55
56static void
57acpi_ut_update_ref_count(union acpi_operand_object *object, u32 action);
58
59/*******************************************************************************
60 *
61 * FUNCTION: acpi_ut_delete_internal_obj
62 *
63 * PARAMETERS: object - Object to be deleted
64 *
65 * RETURN: None
66 *
67 * DESCRIPTION: Low level object deletion, after reference counts have been
68 * updated (All reference counts, including sub-objects!)
69 *
70 ******************************************************************************/
71
72static void acpi_ut_delete_internal_obj(union acpi_operand_object *object)
73{
74 void *obj_pointer = NULL;
75 union acpi_operand_object *handler_desc;
76 union acpi_operand_object *second_desc;
77 union acpi_operand_object *next_desc;
78 union acpi_operand_object *start_desc;
79 union acpi_operand_object **last_obj_ptr;
80
81 ACPI_FUNCTION_TRACE_PTR(ut_delete_internal_obj, object);
82
83 if (!object) {
84 return_VOID;
85 }
86
87 /*
88 * Must delete or free any pointers within the object that are not
89 * actual ACPI objects (for example, a raw buffer pointer).
90 */
91 switch (object->common.type) {
92 case ACPI_TYPE_STRING:
93
94 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
95 "**** String %p, ptr %p\n", object,
96 object->string.pointer));
97
98 /* Free the actual string buffer */
99
100 if (!(object->common.flags & AOPOBJ_STATIC_POINTER)) {
101
102 /* But only if it is NOT a pointer into an ACPI table */
103
104 obj_pointer = object->string.pointer;
105 }
106 break;
107
108 case ACPI_TYPE_BUFFER:
109
110 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
111 "**** Buffer %p, ptr %p\n", object,
112 object->buffer.pointer));
113
114 /* Free the actual buffer */
115
116 if (!(object->common.flags & AOPOBJ_STATIC_POINTER)) {
117
118 /* But only if it is NOT a pointer into an ACPI table */
119
120 obj_pointer = object->buffer.pointer;
121 }
122 break;
123
124 case ACPI_TYPE_PACKAGE:
125
126 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
127 " **** Package of count %X\n",
128 object->package.count));
129
130 /*
131 * Elements of the package are not handled here, they are deleted
132 * separately
133 */
134
135 /* Free the (variable length) element pointer array */
136
137 obj_pointer = object->package.elements;
138 break;
139
140 /*
141 * These objects have a possible list of notify handlers.
142 * Device object also may have a GPE block.
143 */
144 case ACPI_TYPE_DEVICE:
145
146 if (object->device.gpe_block) {
147 (void)acpi_ev_delete_gpe_block(object->device.
148 gpe_block);
149 }
150
151 /*lint -fallthrough */
152
153 case ACPI_TYPE_PROCESSOR:
154 case ACPI_TYPE_THERMAL:
155
156 /* Walk the address handler list for this object */
157
158 handler_desc = object->common_notify.handler;
159 while (handler_desc) {
160 next_desc = handler_desc->address_space.next;
161 acpi_ut_remove_reference(handler_desc);
162 handler_desc = next_desc;
163 }
164 break;
165
166 case ACPI_TYPE_MUTEX:
167
168 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
169 "***** Mutex %p, OS Mutex %p\n",
170 object, object->mutex.os_mutex));
171
172 if (object == acpi_gbl_global_lock_mutex) {
173
174 /* Global Lock has extra semaphore */
175
176 (void)
177 acpi_os_delete_semaphore
178 (acpi_gbl_global_lock_semaphore);
179 acpi_gbl_global_lock_semaphore = NULL;
180
181 acpi_os_delete_mutex(object->mutex.os_mutex);
182 acpi_gbl_global_lock_mutex = NULL;
183 } else {
184 acpi_ex_unlink_mutex(object);
185 acpi_os_delete_mutex(object->mutex.os_mutex);
186 }
187 break;
188
189 case ACPI_TYPE_EVENT:
190
191 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
192 "***** Event %p, OS Semaphore %p\n",
193 object, object->event.os_semaphore));
194
195 (void)acpi_os_delete_semaphore(object->event.os_semaphore);
196 object->event.os_semaphore = NULL;
197 break;
198
199 case ACPI_TYPE_METHOD:
200
201 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
202 "***** Method %p\n", object));
203
204 /* Delete the method mutex if it exists */
205
206 if (object->method.mutex) {
207 acpi_os_delete_mutex(object->method.mutex->mutex.
208 os_mutex);
209 acpi_ut_delete_object_desc(object->method.mutex);
210 object->method.mutex = NULL;
211 }
212
213 if (object->method.node) {
214 object->method.node = NULL;
215 }
216 break;
217
218 case ACPI_TYPE_REGION:
219
220 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
221 "***** Region %p\n", object));
222
223 /*
224 * Update address_range list. However, only permanent regions
225 * are installed in this list. (Not created within a method)
226 */
227 if (!(object->region.node->flags & ANOBJ_TEMPORARY)) {
228 acpi_ut_remove_address_range(object->region.space_id,
229 object->region.node);
230 }
231
232 second_desc = acpi_ns_get_secondary_object(object);
233 if (second_desc) {
234 /*
235 * Free the region_context if and only if the handler is one of the
236 * default handlers -- and therefore, we created the context object
237 * locally, it was not created by an external caller.
238 */
239 handler_desc = object->region.handler;
240 if (handler_desc) {
241 next_desc =
242 handler_desc->address_space.region_list;
243 start_desc = next_desc;
244 last_obj_ptr =
245 &handler_desc->address_space.region_list;
246
247 /* Remove the region object from the handler list */
248
249 while (next_desc) {
250 if (next_desc == object) {
251 *last_obj_ptr =
252 next_desc->region.next;
253 break;
254 }
255
256 /* Walk the linked list of handlers */
257
258 last_obj_ptr = &next_desc->region.next;
259 next_desc = next_desc->region.next;
260
261 /* Prevent infinite loop if list is corrupted */
262
263 if (next_desc == start_desc) {
264 ACPI_ERROR((AE_INFO,
265 "Circular region list in address handler object %p",
266 handler_desc));
267 return_VOID;
268 }
269 }
270
271 if (handler_desc->address_space.handler_flags &
272 ACPI_ADDR_HANDLER_DEFAULT_INSTALLED) {
273
274 /* Deactivate region and free region context */
275
276 if (handler_desc->address_space.setup) {
277 (void)handler_desc->
278 address_space.setup(object,
279 ACPI_REGION_DEACTIVATE,
280 handler_desc->
281 address_space.
282 context,
283 &second_desc->
284 extra.
285 region_context);
286 }
287 }
288
289 acpi_ut_remove_reference(handler_desc);
290 }
291
292 /* Now we can free the Extra object */
293
294 acpi_ut_delete_object_desc(second_desc);
295 }
296 break;
297
298 case ACPI_TYPE_BUFFER_FIELD:
299
300 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
301 "***** Buffer Field %p\n", object));
302
303 second_desc = acpi_ns_get_secondary_object(object);
304 if (second_desc) {
305 acpi_ut_delete_object_desc(second_desc);
306 }
307 break;
308
309 case ACPI_TYPE_LOCAL_BANK_FIELD:
310
311 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
312 "***** Bank Field %p\n", object));
313
314 second_desc = acpi_ns_get_secondary_object(object);
315 if (second_desc) {
316 acpi_ut_delete_object_desc(second_desc);
317 }
318 break;
319
320 default:
321
322 break;
323 }
324
325 /* Free any allocated memory (pointer within the object) found above */
326
327 if (obj_pointer) {
328 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
329 "Deleting Object Subptr %p\n", obj_pointer));
330 ACPI_FREE(obj_pointer);
331 }
332
333 /* Now the object can be safely deleted */
334
335 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS, "Deleting Object %p [%s]\n",
336 object, acpi_ut_get_object_type_name(object)));
337
338 acpi_ut_delete_object_desc(object);
339 return_VOID;
340}
341
342/*******************************************************************************
343 *
344 * FUNCTION: acpi_ut_delete_internal_object_list
345 *
346 * PARAMETERS: obj_list - Pointer to the list to be deleted
347 *
348 * RETURN: None
349 *
350 * DESCRIPTION: This function deletes an internal object list, including both
351 * simple objects and package objects
352 *
353 ******************************************************************************/
354
355void acpi_ut_delete_internal_object_list(union acpi_operand_object **obj_list)
356{
357 union acpi_operand_object **internal_obj;
358
359 ACPI_FUNCTION_ENTRY();
360
361 /* Walk the null-terminated internal list */
362
363 for (internal_obj = obj_list; *internal_obj; internal_obj++) {
364 acpi_ut_remove_reference(*internal_obj);
365 }
366
367 /* Free the combined parameter pointer list and object array */
368
369 ACPI_FREE(obj_list);
370 return;
371}
372
373/*******************************************************************************
374 *
375 * FUNCTION: acpi_ut_update_ref_count
376 *
377 * PARAMETERS: object - Object whose ref count is to be updated
378 * action - What to do (REF_INCREMENT or REF_DECREMENT)
379 *
380 * RETURN: None. Sets new reference count within the object
381 *
382 * DESCRIPTION: Modify the reference count for an internal acpi object
383 *
384 ******************************************************************************/
385
386static void
387acpi_ut_update_ref_count(union acpi_operand_object *object, u32 action)
388{
389 u16 original_count;
390 u16 new_count = 0;
391 acpi_cpu_flags lock_flags;
392
393 ACPI_FUNCTION_NAME(ut_update_ref_count);
394
395 if (!object) {
396 return;
397 }
398
399 /*
400 * Always get the reference count lock. Note: Interpreter and/or
401 * Namespace is not always locked when this function is called.
402 */
403 lock_flags = acpi_os_acquire_lock(acpi_gbl_reference_count_lock);
404 original_count = object->common.reference_count;
405
406 /* Perform the reference count action (increment, decrement) */
407
408 switch (action) {
409 case REF_INCREMENT:
410
411 new_count = original_count + 1;
412 object->common.reference_count = new_count;
413 acpi_os_release_lock(acpi_gbl_reference_count_lock, lock_flags);
414
415 /* The current reference count should never be zero here */
416
417 if (!original_count) {
418 ACPI_WARNING((AE_INFO,
419 "Obj %p, Reference Count was zero before increment\n",
420 object));
421 }
422
423 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
424 "Obj %p Type %.2X Refs %.2X [Incremented]\n",
425 object, object->common.type, new_count));
426 break;
427
428 case REF_DECREMENT:
429
430 /* The current reference count must be non-zero */
431
432 if (original_count) {
433 new_count = original_count - 1;
434 object->common.reference_count = new_count;
435 }
436
437 acpi_os_release_lock(acpi_gbl_reference_count_lock, lock_flags);
438
439 if (!original_count) {
440 ACPI_WARNING((AE_INFO,
441 "Obj %p, Reference Count is already zero, cannot decrement\n",
442 object));
443 }
444
445 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
446 "Obj %p Type %.2X Refs %.2X [Decremented]\n",
447 object, object->common.type, new_count));
448
449 /* Actually delete the object on a reference count of zero */
450
451 if (new_count == 0) {
452 acpi_ut_delete_internal_obj(object);
453 }
454 break;
455
456 default:
457
458 acpi_os_release_lock(acpi_gbl_reference_count_lock, lock_flags);
459 ACPI_ERROR((AE_INFO, "Unknown Reference Count action (0x%X)",
460 action));
461 return;
462 }
463
464 /*
465 * Sanity check the reference count, for debug purposes only.
466 * (A deleted object will have a huge reference count)
467 */
468 if (new_count > ACPI_MAX_REFERENCE_COUNT) {
469 ACPI_WARNING((AE_INFO,
470 "Large Reference Count (0x%X) in object %p, Type=0x%.2X",
471 new_count, object, object->common.type));
472 }
473}
474
475/*******************************************************************************
476 *
477 * FUNCTION: acpi_ut_update_object_reference
478 *
479 * PARAMETERS: object - Increment ref count for this object
480 * and all sub-objects
481 * action - Either REF_INCREMENT or REF_DECREMENT
482 *
483 * RETURN: Status
484 *
485 * DESCRIPTION: Increment the object reference count
486 *
487 * Object references are incremented when:
488 * 1) An object is attached to a Node (namespace object)
489 * 2) An object is copied (all subobjects must be incremented)
490 *
491 * Object references are decremented when:
492 * 1) An object is detached from an Node
493 *
494 ******************************************************************************/
495
496acpi_status
497acpi_ut_update_object_reference(union acpi_operand_object *object, u16 action)
498{
499 acpi_status status = AE_OK;
500 union acpi_generic_state *state_list = NULL;
501 union acpi_operand_object *next_object = NULL;
502 union acpi_operand_object *prev_object;
503 union acpi_generic_state *state;
504 u32 i;
505
506 ACPI_FUNCTION_NAME(ut_update_object_reference);
507
508 while (object) {
509
510 /* Make sure that this isn't a namespace handle */
511
512 if (ACPI_GET_DESCRIPTOR_TYPE(object) == ACPI_DESC_TYPE_NAMED) {
513 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
514 "Object %p is NS handle\n", object));
515 return (AE_OK);
516 }
517
518 /*
519 * All sub-objects must have their reference count incremented
520 * also. Different object types have different subobjects.
521 */
522 switch (object->common.type) {
523 case ACPI_TYPE_DEVICE:
524 case ACPI_TYPE_PROCESSOR:
525 case ACPI_TYPE_POWER:
526 case ACPI_TYPE_THERMAL:
527 /*
528 * Update the notify objects for these types (if present)
529 * Two lists, system and device notify handlers.
530 */
531 for (i = 0; i < ACPI_NUM_NOTIFY_TYPES; i++) {
532 prev_object =
533 object->common_notify.notify_list[i];
534 while (prev_object) {
535 next_object =
536 prev_object->notify.next[i];
537 acpi_ut_update_ref_count(prev_object,
538 action);
539 prev_object = next_object;
540 }
541 }
542 break;
543
544 case ACPI_TYPE_PACKAGE:
545 /*
546 * We must update all the sub-objects of the package,
547 * each of whom may have their own sub-objects.
548 */
549 for (i = 0; i < object->package.count; i++) {
550 /*
551 * Null package elements are legal and can be simply
552 * ignored.
553 */
554 next_object = object->package.elements[i];
555 if (!next_object) {
556 continue;
557 }
558
559 switch (next_object->common.type) {
560 case ACPI_TYPE_INTEGER:
561 case ACPI_TYPE_STRING:
562 case ACPI_TYPE_BUFFER:
563 /*
564 * For these very simple sub-objects, we can just
565 * update the reference count here and continue.
566 * Greatly increases performance of this operation.
567 */
568 acpi_ut_update_ref_count(next_object,
569 action);
570 break;
571
572 default:
573 /*
574 * For complex sub-objects, push them onto the stack
575 * for later processing (this eliminates recursion.)
576 */
577 status =
578 acpi_ut_create_update_state_and_push
579 (next_object, action, &state_list);
580 if (ACPI_FAILURE(status)) {
581 goto error_exit;
582 }
583 break;
584 }
585 }
586 next_object = NULL;
587 break;
588
589 case ACPI_TYPE_BUFFER_FIELD:
590
591 next_object = object->buffer_field.buffer_obj;
592 break;
593
594 case ACPI_TYPE_LOCAL_REGION_FIELD:
595
596 next_object = object->field.region_obj;
597 break;
598
599 case ACPI_TYPE_LOCAL_BANK_FIELD:
600
601 next_object = object->bank_field.bank_obj;
602 status =
603 acpi_ut_create_update_state_and_push(object->
604 bank_field.
605 region_obj,
606 action,
607 &state_list);
608 if (ACPI_FAILURE(status)) {
609 goto error_exit;
610 }
611 break;
612
613 case ACPI_TYPE_LOCAL_INDEX_FIELD:
614
615 next_object = object->index_field.index_obj;
616 status =
617 acpi_ut_create_update_state_and_push(object->
618 index_field.
619 data_obj,
620 action,
621 &state_list);
622 if (ACPI_FAILURE(status)) {
623 goto error_exit;
624 }
625 break;
626
627 case ACPI_TYPE_LOCAL_REFERENCE:
628 /*
629 * The target of an Index (a package, string, or buffer) or a named
630 * reference must track changes to the ref count of the index or
631 * target object.
632 */
633 if ((object->reference.class == ACPI_REFCLASS_INDEX) ||
634 (object->reference.class == ACPI_REFCLASS_NAME)) {
635 next_object = object->reference.object;
636 }
637 break;
638
639 case ACPI_TYPE_REGION:
640 default:
641
642 break; /* No subobjects for all other types */
643 }
644
645 /*
646 * Now we can update the count in the main object. This can only
647 * happen after we update the sub-objects in case this causes the
648 * main object to be deleted.
649 */
650 acpi_ut_update_ref_count(object, action);
651 object = NULL;
652
653 /* Move on to the next object to be updated */
654
655 if (next_object) {
656 object = next_object;
657 next_object = NULL;
658 } else if (state_list) {
659 state = acpi_ut_pop_generic_state(&state_list);
660 object = state->update.object;
661 acpi_ut_delete_generic_state(state);
662 }
663 }
664
665 return (AE_OK);
666
667error_exit:
668
669 ACPI_EXCEPTION((AE_INFO, status,
670 "Could not update object reference count"));
671
672 /* Free any stacked Update State objects */
673
674 while (state_list) {
675 state = acpi_ut_pop_generic_state(&state_list);
676 acpi_ut_delete_generic_state(state);
677 }
678
679 return (status);
680}
681
682/*******************************************************************************
683 *
684 * FUNCTION: acpi_ut_add_reference
685 *
686 * PARAMETERS: object - Object whose reference count is to be
687 * incremented
688 *
689 * RETURN: None
690 *
691 * DESCRIPTION: Add one reference to an ACPI object
692 *
693 ******************************************************************************/
694
695void acpi_ut_add_reference(union acpi_operand_object *object)
696{
697
698 ACPI_FUNCTION_NAME(ut_add_reference);
699
700 /* Ensure that we have a valid object */
701
702 if (!acpi_ut_valid_internal_object(object)) {
703 return;
704 }
705
706 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
707 "Obj %p Current Refs=%X [To Be Incremented]\n",
708 object, object->common.reference_count));
709
710 /* Increment the reference count */
711
712 (void)acpi_ut_update_object_reference(object, REF_INCREMENT);
713 return;
714}
715
716/*******************************************************************************
717 *
718 * FUNCTION: acpi_ut_remove_reference
719 *
720 * PARAMETERS: object - Object whose ref count will be decremented
721 *
722 * RETURN: None
723 *
724 * DESCRIPTION: Decrement the reference count of an ACPI internal object
725 *
726 ******************************************************************************/
727
728void acpi_ut_remove_reference(union acpi_operand_object *object)
729{
730
731 ACPI_FUNCTION_NAME(ut_remove_reference);
732
733 /*
734 * Allow a NULL pointer to be passed in, just ignore it. This saves
735 * each caller from having to check. Also, ignore NS nodes.
736 */
737 if (!object ||
738 (ACPI_GET_DESCRIPTOR_TYPE(object) == ACPI_DESC_TYPE_NAMED)) {
739 return;
740 }
741
742 /* Ensure that we have a valid object */
743
744 if (!acpi_ut_valid_internal_object(object)) {
745 return;
746 }
747
748 ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
749 "Obj %p Current Refs=%X [To Be Decremented]\n",
750 object, object->common.reference_count));
751
752 /*
753 * Decrement the reference count, and only actually delete the object
754 * if the reference count becomes 0. (Must also decrement the ref count
755 * of all subobjects!)
756 */
757 (void)acpi_ut_update_object_reference(object, REF_DECREMENT);
758 return;
759}