Loading...
1/*
2 * Copyright © 2006 Keith Packard
3 * Copyright © 2007-2008 Dave Airlie
4 * Copyright © 2007-2008 Intel Corporation
5 * Jesse Barnes <jesse.barnes@intel.com>
6 *
7 * Permission is hereby granted, free of charge, to any person obtaining a
8 * copy of this software and associated documentation files (the "Software"),
9 * to deal in the Software without restriction, including without limitation
10 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
11 * and/or sell copies of the Software, and to permit persons to whom the
12 * Software is furnished to do so, subject to the following conditions:
13 *
14 * The above copyright notice and this permission notice shall be included in
15 * all copies or substantial portions of the Software.
16 *
17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
18 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
19 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
20 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
21 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
22 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
23 * OTHER DEALINGS IN THE SOFTWARE.
24 */
25#ifndef __DRM_CRTC_H__
26#define __DRM_CRTC_H__
27
28#include <linux/i2c.h>
29#include <linux/spinlock.h>
30#include <linux/types.h>
31#include <linux/idr.h>
32
33#include <linux/fb.h>
34
35struct drm_device;
36struct drm_mode_set;
37struct drm_framebuffer;
38
39
40#define DRM_MODE_OBJECT_CRTC 0xcccccccc
41#define DRM_MODE_OBJECT_CONNECTOR 0xc0c0c0c0
42#define DRM_MODE_OBJECT_ENCODER 0xe0e0e0e0
43#define DRM_MODE_OBJECT_MODE 0xdededede
44#define DRM_MODE_OBJECT_PROPERTY 0xb0b0b0b0
45#define DRM_MODE_OBJECT_FB 0xfbfbfbfb
46#define DRM_MODE_OBJECT_BLOB 0xbbbbbbbb
47
48struct drm_mode_object {
49 uint32_t id;
50 uint32_t type;
51};
52
53/*
54 * Note on terminology: here, for brevity and convenience, we refer to connector
55 * control chips as 'CRTCs'. They can control any type of connector, VGA, LVDS,
56 * DVI, etc. And 'screen' refers to the whole of the visible display, which
57 * may span multiple monitors (and therefore multiple CRTC and connector
58 * structures).
59 */
60
61enum drm_mode_status {
62 MODE_OK = 0, /* Mode OK */
63 MODE_HSYNC, /* hsync out of range */
64 MODE_VSYNC, /* vsync out of range */
65 MODE_H_ILLEGAL, /* mode has illegal horizontal timings */
66 MODE_V_ILLEGAL, /* mode has illegal horizontal timings */
67 MODE_BAD_WIDTH, /* requires an unsupported linepitch */
68 MODE_NOMODE, /* no mode with a matching name */
69 MODE_NO_INTERLACE, /* interlaced mode not supported */
70 MODE_NO_DBLESCAN, /* doublescan mode not supported */
71 MODE_NO_VSCAN, /* multiscan mode not supported */
72 MODE_MEM, /* insufficient video memory */
73 MODE_VIRTUAL_X, /* mode width too large for specified virtual size */
74 MODE_VIRTUAL_Y, /* mode height too large for specified virtual size */
75 MODE_MEM_VIRT, /* insufficient video memory given virtual size */
76 MODE_NOCLOCK, /* no fixed clock available */
77 MODE_CLOCK_HIGH, /* clock required is too high */
78 MODE_CLOCK_LOW, /* clock required is too low */
79 MODE_CLOCK_RANGE, /* clock/mode isn't in a ClockRange */
80 MODE_BAD_HVALUE, /* horizontal timing was out of range */
81 MODE_BAD_VVALUE, /* vertical timing was out of range */
82 MODE_BAD_VSCAN, /* VScan value out of range */
83 MODE_HSYNC_NARROW, /* horizontal sync too narrow */
84 MODE_HSYNC_WIDE, /* horizontal sync too wide */
85 MODE_HBLANK_NARROW, /* horizontal blanking too narrow */
86 MODE_HBLANK_WIDE, /* horizontal blanking too wide */
87 MODE_VSYNC_NARROW, /* vertical sync too narrow */
88 MODE_VSYNC_WIDE, /* vertical sync too wide */
89 MODE_VBLANK_NARROW, /* vertical blanking too narrow */
90 MODE_VBLANK_WIDE, /* vertical blanking too wide */
91 MODE_PANEL, /* exceeds panel dimensions */
92 MODE_INTERLACE_WIDTH, /* width too large for interlaced mode */
93 MODE_ONE_WIDTH, /* only one width is supported */
94 MODE_ONE_HEIGHT, /* only one height is supported */
95 MODE_ONE_SIZE, /* only one resolution is supported */
96 MODE_NO_REDUCED, /* monitor doesn't accept reduced blanking */
97 MODE_UNVERIFIED = -3, /* mode needs to reverified */
98 MODE_BAD = -2, /* unspecified reason */
99 MODE_ERROR = -1 /* error condition */
100};
101
102#define DRM_MODE_TYPE_CLOCK_CRTC_C (DRM_MODE_TYPE_CLOCK_C | \
103 DRM_MODE_TYPE_CRTC_C)
104
105#define DRM_MODE(nm, t, c, hd, hss, hse, ht, hsk, vd, vss, vse, vt, vs, f) \
106 .name = nm, .status = 0, .type = (t), .clock = (c), \
107 .hdisplay = (hd), .hsync_start = (hss), .hsync_end = (hse), \
108 .htotal = (ht), .hskew = (hsk), .vdisplay = (vd), \
109 .vsync_start = (vss), .vsync_end = (vse), .vtotal = (vt), \
110 .vscan = (vs), .flags = (f), .vrefresh = 0
111
112#define CRTC_INTERLACE_HALVE_V 0x1 /* halve V values for interlacing */
113
114struct drm_display_mode {
115 /* Header */
116 struct list_head head;
117 struct drm_mode_object base;
118
119 char name[DRM_DISPLAY_MODE_LEN];
120
121 int connector_count;
122 enum drm_mode_status status;
123 int type;
124
125 /* Proposed mode values */
126 int clock; /* in kHz */
127 int hdisplay;
128 int hsync_start;
129 int hsync_end;
130 int htotal;
131 int hskew;
132 int vdisplay;
133 int vsync_start;
134 int vsync_end;
135 int vtotal;
136 int vscan;
137 unsigned int flags;
138
139 /* Addressable image size (may be 0 for projectors, etc.) */
140 int width_mm;
141 int height_mm;
142
143 /* Actual mode we give to hw */
144 int clock_index;
145 int synth_clock;
146 int crtc_hdisplay;
147 int crtc_hblank_start;
148 int crtc_hblank_end;
149 int crtc_hsync_start;
150 int crtc_hsync_end;
151 int crtc_htotal;
152 int crtc_hskew;
153 int crtc_vdisplay;
154 int crtc_vblank_start;
155 int crtc_vblank_end;
156 int crtc_vsync_start;
157 int crtc_vsync_end;
158 int crtc_vtotal;
159 int crtc_hadjusted;
160 int crtc_vadjusted;
161
162 /* Driver private mode info */
163 int private_size;
164 int *private;
165 int private_flags;
166
167 int vrefresh; /* in Hz */
168 int hsync; /* in kHz */
169};
170
171enum drm_connector_status {
172 connector_status_connected = 1,
173 connector_status_disconnected = 2,
174 connector_status_unknown = 3,
175};
176
177enum subpixel_order {
178 SubPixelUnknown = 0,
179 SubPixelHorizontalRGB,
180 SubPixelHorizontalBGR,
181 SubPixelVerticalRGB,
182 SubPixelVerticalBGR,
183 SubPixelNone,
184};
185
186#define DRM_COLOR_FORMAT_RGB444 (1<<0)
187#define DRM_COLOR_FORMAT_YCRCB444 (1<<1)
188#define DRM_COLOR_FORMAT_YCRCB422 (1<<2)
189/*
190 * Describes a given display (e.g. CRT or flat panel) and its limitations.
191 */
192struct drm_display_info {
193 char name[DRM_DISPLAY_INFO_LEN];
194
195 /* Physical size */
196 unsigned int width_mm;
197 unsigned int height_mm;
198
199 /* Clock limits FIXME: storage format */
200 unsigned int min_vfreq, max_vfreq;
201 unsigned int min_hfreq, max_hfreq;
202 unsigned int pixel_clock;
203 unsigned int bpc;
204
205 enum subpixel_order subpixel_order;
206 u32 color_formats;
207
208 u8 cea_rev;
209
210 char *raw_edid; /* if any */
211};
212
213struct drm_framebuffer_funcs {
214 void (*destroy)(struct drm_framebuffer *framebuffer);
215 int (*create_handle)(struct drm_framebuffer *fb,
216 struct drm_file *file_priv,
217 unsigned int *handle);
218 /**
219 * Optinal callback for the dirty fb ioctl.
220 *
221 * Userspace can notify the driver via this callback
222 * that a area of the framebuffer has changed and should
223 * be flushed to the display hardware.
224 *
225 * See documentation in drm_mode.h for the struct
226 * drm_mode_fb_dirty_cmd for more information as all
227 * the semantics and arguments have a one to one mapping
228 * on this function.
229 */
230 int (*dirty)(struct drm_framebuffer *framebuffer,
231 struct drm_file *file_priv, unsigned flags,
232 unsigned color, struct drm_clip_rect *clips,
233 unsigned num_clips);
234};
235
236struct drm_framebuffer {
237 struct drm_device *dev;
238 struct list_head head;
239 struct drm_mode_object base;
240 const struct drm_framebuffer_funcs *funcs;
241 unsigned int pitch;
242 unsigned int width;
243 unsigned int height;
244 /* depth can be 15 or 16 */
245 unsigned int depth;
246 int bits_per_pixel;
247 int flags;
248 struct list_head filp_head;
249 /* if you are using the helper */
250 void *helper_private;
251};
252
253struct drm_property_blob {
254 struct drm_mode_object base;
255 struct list_head head;
256 unsigned int length;
257 void *data;
258};
259
260struct drm_property_enum {
261 uint64_t value;
262 struct list_head head;
263 char name[DRM_PROP_NAME_LEN];
264};
265
266struct drm_property {
267 struct list_head head;
268 struct drm_mode_object base;
269 uint32_t flags;
270 char name[DRM_PROP_NAME_LEN];
271 uint32_t num_values;
272 uint64_t *values;
273
274 struct list_head enum_blob_list;
275};
276
277struct drm_crtc;
278struct drm_connector;
279struct drm_encoder;
280struct drm_pending_vblank_event;
281
282/**
283 * drm_crtc_funcs - control CRTCs for a given device
284 * @reset: reset CRTC after state has been invalidate (e.g. resume)
285 * @dpms: control display power levels
286 * @save: save CRTC state
287 * @resore: restore CRTC state
288 * @lock: lock the CRTC
289 * @unlock: unlock the CRTC
290 * @shadow_allocate: allocate shadow pixmap
291 * @shadow_create: create shadow pixmap for rotation support
292 * @shadow_destroy: free shadow pixmap
293 * @mode_fixup: fixup proposed mode
294 * @mode_set: set the desired mode on the CRTC
295 * @gamma_set: specify color ramp for CRTC
296 * @destroy: deinit and free object.
297 *
298 * The drm_crtc_funcs structure is the central CRTC management structure
299 * in the DRM. Each CRTC controls one or more connectors (note that the name
300 * CRTC is simply historical, a CRTC may control LVDS, VGA, DVI, TV out, etc.
301 * connectors, not just CRTs).
302 *
303 * Each driver is responsible for filling out this structure at startup time,
304 * in addition to providing other modesetting features, like i2c and DDC
305 * bus accessors.
306 */
307struct drm_crtc_funcs {
308 /* Save CRTC state */
309 void (*save)(struct drm_crtc *crtc); /* suspend? */
310 /* Restore CRTC state */
311 void (*restore)(struct drm_crtc *crtc); /* resume? */
312 /* Reset CRTC state */
313 void (*reset)(struct drm_crtc *crtc);
314
315 /* cursor controls */
316 int (*cursor_set)(struct drm_crtc *crtc, struct drm_file *file_priv,
317 uint32_t handle, uint32_t width, uint32_t height);
318 int (*cursor_move)(struct drm_crtc *crtc, int x, int y);
319
320 /* Set gamma on the CRTC */
321 void (*gamma_set)(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b,
322 uint32_t start, uint32_t size);
323 /* Object destroy routine */
324 void (*destroy)(struct drm_crtc *crtc);
325
326 int (*set_config)(struct drm_mode_set *set);
327
328 /*
329 * Flip to the given framebuffer. This implements the page
330 * flip ioctl described in drm_mode.h, specifically, the
331 * implementation must return immediately and block all
332 * rendering to the current fb until the flip has completed.
333 * If userspace set the event flag in the ioctl, the event
334 * argument will point to an event to send back when the flip
335 * completes, otherwise it will be NULL.
336 */
337 int (*page_flip)(struct drm_crtc *crtc,
338 struct drm_framebuffer *fb,
339 struct drm_pending_vblank_event *event);
340};
341
342/**
343 * drm_crtc - central CRTC control structure
344 * @enabled: is this CRTC enabled?
345 * @x: x position on screen
346 * @y: y position on screen
347 * @funcs: CRTC control functions
348 *
349 * Each CRTC may have one or more connectors associated with it. This structure
350 * allows the CRTC to be controlled.
351 */
352struct drm_crtc {
353 struct drm_device *dev;
354 struct list_head head;
355
356 struct drm_mode_object base;
357
358 /* framebuffer the connector is currently bound to */
359 struct drm_framebuffer *fb;
360
361 bool enabled;
362
363 /* Requested mode from modesetting. */
364 struct drm_display_mode mode;
365
366 /* Programmed mode in hw, after adjustments for encoders,
367 * crtc, panel scaling etc. Needed for timestamping etc.
368 */
369 struct drm_display_mode hwmode;
370
371 int x, y;
372 const struct drm_crtc_funcs *funcs;
373
374 /* CRTC gamma size for reporting to userspace */
375 uint32_t gamma_size;
376 uint16_t *gamma_store;
377
378 /* Constants needed for precise vblank and swap timestamping. */
379 s64 framedur_ns, linedur_ns, pixeldur_ns;
380
381 /* if you are using the helper */
382 void *helper_private;
383};
384
385
386/**
387 * drm_connector_funcs - control connectors on a given device
388 * @dpms: set power state (see drm_crtc_funcs above)
389 * @save: save connector state
390 * @restore: restore connector state
391 * @reset: reset connector after state has been invalidate (e.g. resume)
392 * @mode_valid: is this mode valid on the given connector?
393 * @mode_fixup: try to fixup proposed mode for this connector
394 * @mode_set: set this mode
395 * @detect: is this connector active?
396 * @get_modes: get mode list for this connector
397 * @set_property: property for this connector may need update
398 * @destroy: make object go away
399 * @force: notify the driver the connector is forced on
400 *
401 * Each CRTC may have one or more connectors attached to it. The functions
402 * below allow the core DRM code to control connectors, enumerate available modes,
403 * etc.
404 */
405struct drm_connector_funcs {
406 void (*dpms)(struct drm_connector *connector, int mode);
407 void (*save)(struct drm_connector *connector);
408 void (*restore)(struct drm_connector *connector);
409 void (*reset)(struct drm_connector *connector);
410
411 /* Check to see if anything is attached to the connector.
412 * @force is set to false whilst polling, true when checking the
413 * connector due to user request. @force can be used by the driver
414 * to avoid expensive, destructive operations during automated
415 * probing.
416 */
417 enum drm_connector_status (*detect)(struct drm_connector *connector,
418 bool force);
419 int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height);
420 int (*set_property)(struct drm_connector *connector, struct drm_property *property,
421 uint64_t val);
422 void (*destroy)(struct drm_connector *connector);
423 void (*force)(struct drm_connector *connector);
424};
425
426struct drm_encoder_funcs {
427 void (*reset)(struct drm_encoder *encoder);
428 void (*destroy)(struct drm_encoder *encoder);
429};
430
431#define DRM_CONNECTOR_MAX_UMODES 16
432#define DRM_CONNECTOR_MAX_PROPERTY 16
433#define DRM_CONNECTOR_LEN 32
434#define DRM_CONNECTOR_MAX_ENCODER 2
435
436/**
437 * drm_encoder - central DRM encoder structure
438 */
439struct drm_encoder {
440 struct drm_device *dev;
441 struct list_head head;
442
443 struct drm_mode_object base;
444 int encoder_type;
445 uint32_t possible_crtcs;
446 uint32_t possible_clones;
447
448 struct drm_crtc *crtc;
449 const struct drm_encoder_funcs *funcs;
450 void *helper_private;
451};
452
453enum drm_connector_force {
454 DRM_FORCE_UNSPECIFIED,
455 DRM_FORCE_OFF,
456 DRM_FORCE_ON, /* force on analog part normally */
457 DRM_FORCE_ON_DIGITAL, /* for DVI-I use digital connector */
458};
459
460/* should we poll this connector for connects and disconnects */
461/* hot plug detectable */
462#define DRM_CONNECTOR_POLL_HPD (1 << 0)
463/* poll for connections */
464#define DRM_CONNECTOR_POLL_CONNECT (1 << 1)
465/* can cleanly poll for disconnections without flickering the screen */
466/* DACs should rarely do this without a lot of testing */
467#define DRM_CONNECTOR_POLL_DISCONNECT (1 << 2)
468
469/**
470 * drm_connector - central DRM connector control structure
471 * @crtc: CRTC this connector is currently connected to, NULL if none
472 * @interlace_allowed: can this connector handle interlaced modes?
473 * @doublescan_allowed: can this connector handle doublescan?
474 * @available_modes: modes available on this connector (from get_modes() + user)
475 * @initial_x: initial x position for this connector
476 * @initial_y: initial y position for this connector
477 * @status: connector connected?
478 * @funcs: connector control functions
479 *
480 * Each connector may be connected to one or more CRTCs, or may be clonable by
481 * another connector if they can share a CRTC. Each connector also has a specific
482 * position in the broader display (referred to as a 'screen' though it could
483 * span multiple monitors).
484 */
485struct drm_connector {
486 struct drm_device *dev;
487 struct device kdev;
488 struct device_attribute *attr;
489 struct list_head head;
490
491 struct drm_mode_object base;
492
493 int connector_type;
494 int connector_type_id;
495 bool interlace_allowed;
496 bool doublescan_allowed;
497 struct list_head modes; /* list of modes on this connector */
498
499 int initial_x, initial_y;
500 enum drm_connector_status status;
501
502 /* these are modes added by probing with DDC or the BIOS */
503 struct list_head probed_modes;
504
505 struct drm_display_info display_info;
506 const struct drm_connector_funcs *funcs;
507
508 struct list_head user_modes;
509 struct drm_property_blob *edid_blob_ptr;
510 u32 property_ids[DRM_CONNECTOR_MAX_PROPERTY];
511 uint64_t property_values[DRM_CONNECTOR_MAX_PROPERTY];
512
513 uint8_t polled; /* DRM_CONNECTOR_POLL_* */
514
515 /* requested DPMS state */
516 int dpms;
517
518 void *helper_private;
519
520 /* forced on connector */
521 enum drm_connector_force force;
522 uint32_t encoder_ids[DRM_CONNECTOR_MAX_ENCODER];
523 uint32_t force_encoder_id;
524 struct drm_encoder *encoder; /* currently active encoder */
525
526 int null_edid_counter; /* needed to workaround some HW bugs where we get all 0s */
527};
528
529/**
530 * struct drm_mode_set
531 *
532 * Represents a single crtc the connectors that it drives with what mode
533 * and from which framebuffer it scans out from.
534 *
535 * This is used to set modes.
536 */
537struct drm_mode_set {
538 struct list_head head;
539
540 struct drm_framebuffer *fb;
541 struct drm_crtc *crtc;
542 struct drm_display_mode *mode;
543
544 uint32_t x;
545 uint32_t y;
546
547 struct drm_connector **connectors;
548 size_t num_connectors;
549};
550
551/**
552 * struct drm_mode_config_funcs - configure CRTCs for a given screen layout
553 */
554struct drm_mode_config_funcs {
555 struct drm_framebuffer *(*fb_create)(struct drm_device *dev, struct drm_file *file_priv, struct drm_mode_fb_cmd *mode_cmd);
556 void (*output_poll_changed)(struct drm_device *dev);
557};
558
559struct drm_mode_group {
560 uint32_t num_crtcs;
561 uint32_t num_encoders;
562 uint32_t num_connectors;
563
564 /* list of object IDs for this group */
565 uint32_t *id_list;
566};
567
568/**
569 * drm_mode_config - Mode configuration control structure
570 *
571 */
572struct drm_mode_config {
573 struct mutex mutex; /* protects configuration (mode lists etc.) */
574 struct mutex idr_mutex; /* for IDR management */
575 struct idr crtc_idr; /* use this idr for all IDs, fb, crtc, connector, modes - just makes life easier */
576 /* this is limited to one for now */
577 int num_fb;
578 struct list_head fb_list;
579 int num_connector;
580 struct list_head connector_list;
581 int num_encoder;
582 struct list_head encoder_list;
583
584 int num_crtc;
585 struct list_head crtc_list;
586
587 struct list_head property_list;
588
589 int min_width, min_height;
590 int max_width, max_height;
591 struct drm_mode_config_funcs *funcs;
592 resource_size_t fb_base;
593
594 /* output poll support */
595 bool poll_enabled;
596 struct delayed_work output_poll_work;
597
598 /* pointers to standard properties */
599 struct list_head property_blob_list;
600 struct drm_property *edid_property;
601 struct drm_property *dpms_property;
602
603 /* DVI-I properties */
604 struct drm_property *dvi_i_subconnector_property;
605 struct drm_property *dvi_i_select_subconnector_property;
606
607 /* TV properties */
608 struct drm_property *tv_subconnector_property;
609 struct drm_property *tv_select_subconnector_property;
610 struct drm_property *tv_mode_property;
611 struct drm_property *tv_left_margin_property;
612 struct drm_property *tv_right_margin_property;
613 struct drm_property *tv_top_margin_property;
614 struct drm_property *tv_bottom_margin_property;
615 struct drm_property *tv_brightness_property;
616 struct drm_property *tv_contrast_property;
617 struct drm_property *tv_flicker_reduction_property;
618 struct drm_property *tv_overscan_property;
619 struct drm_property *tv_saturation_property;
620 struct drm_property *tv_hue_property;
621
622 /* Optional properties */
623 struct drm_property *scaling_mode_property;
624 struct drm_property *dithering_mode_property;
625 struct drm_property *dirty_info_property;
626};
627
628#define obj_to_crtc(x) container_of(x, struct drm_crtc, base)
629#define obj_to_connector(x) container_of(x, struct drm_connector, base)
630#define obj_to_encoder(x) container_of(x, struct drm_encoder, base)
631#define obj_to_mode(x) container_of(x, struct drm_display_mode, base)
632#define obj_to_fb(x) container_of(x, struct drm_framebuffer, base)
633#define obj_to_property(x) container_of(x, struct drm_property, base)
634#define obj_to_blob(x) container_of(x, struct drm_property_blob, base)
635
636
637extern void drm_crtc_init(struct drm_device *dev,
638 struct drm_crtc *crtc,
639 const struct drm_crtc_funcs *funcs);
640extern void drm_crtc_cleanup(struct drm_crtc *crtc);
641
642extern void drm_connector_init(struct drm_device *dev,
643 struct drm_connector *connector,
644 const struct drm_connector_funcs *funcs,
645 int connector_type);
646
647extern void drm_connector_cleanup(struct drm_connector *connector);
648
649extern void drm_encoder_init(struct drm_device *dev,
650 struct drm_encoder *encoder,
651 const struct drm_encoder_funcs *funcs,
652 int encoder_type);
653
654extern void drm_encoder_cleanup(struct drm_encoder *encoder);
655
656extern char *drm_get_connector_name(struct drm_connector *connector);
657extern char *drm_get_dpms_name(int val);
658extern char *drm_get_dvi_i_subconnector_name(int val);
659extern char *drm_get_dvi_i_select_name(int val);
660extern char *drm_get_tv_subconnector_name(int val);
661extern char *drm_get_tv_select_name(int val);
662extern void drm_fb_release(struct drm_file *file_priv);
663extern int drm_mode_group_init_legacy_group(struct drm_device *dev, struct drm_mode_group *group);
664extern struct edid *drm_get_edid(struct drm_connector *connector,
665 struct i2c_adapter *adapter);
666extern int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid);
667extern void drm_mode_probed_add(struct drm_connector *connector, struct drm_display_mode *mode);
668extern void drm_mode_remove(struct drm_connector *connector, struct drm_display_mode *mode);
669extern struct drm_display_mode *drm_mode_duplicate(struct drm_device *dev,
670 const struct drm_display_mode *mode);
671extern void drm_mode_debug_printmodeline(struct drm_display_mode *mode);
672extern void drm_mode_config_init(struct drm_device *dev);
673extern void drm_mode_config_reset(struct drm_device *dev);
674extern void drm_mode_config_cleanup(struct drm_device *dev);
675extern void drm_mode_set_name(struct drm_display_mode *mode);
676extern bool drm_mode_equal(struct drm_display_mode *mode1, struct drm_display_mode *mode2);
677extern int drm_mode_width(struct drm_display_mode *mode);
678extern int drm_mode_height(struct drm_display_mode *mode);
679
680/* for us by fb module */
681extern int drm_mode_attachmode_crtc(struct drm_device *dev,
682 struct drm_crtc *crtc,
683 struct drm_display_mode *mode);
684extern int drm_mode_detachmode_crtc(struct drm_device *dev, struct drm_display_mode *mode);
685
686extern struct drm_display_mode *drm_mode_create(struct drm_device *dev);
687extern void drm_mode_destroy(struct drm_device *dev, struct drm_display_mode *mode);
688extern void drm_mode_list_concat(struct list_head *head,
689 struct list_head *new);
690extern void drm_mode_validate_size(struct drm_device *dev,
691 struct list_head *mode_list,
692 int maxX, int maxY, int maxPitch);
693extern void drm_mode_prune_invalid(struct drm_device *dev,
694 struct list_head *mode_list, bool verbose);
695extern void drm_mode_sort(struct list_head *mode_list);
696extern int drm_mode_hsync(const struct drm_display_mode *mode);
697extern int drm_mode_vrefresh(const struct drm_display_mode *mode);
698extern void drm_mode_set_crtcinfo(struct drm_display_mode *p,
699 int adjust_flags);
700extern void drm_mode_connector_list_update(struct drm_connector *connector);
701extern int drm_mode_connector_update_edid_property(struct drm_connector *connector,
702 struct edid *edid);
703extern int drm_connector_property_set_value(struct drm_connector *connector,
704 struct drm_property *property,
705 uint64_t value);
706extern int drm_connector_property_get_value(struct drm_connector *connector,
707 struct drm_property *property,
708 uint64_t *value);
709extern struct drm_display_mode *drm_crtc_mode_create(struct drm_device *dev);
710extern void drm_framebuffer_set_object(struct drm_device *dev,
711 unsigned long handle);
712extern int drm_framebuffer_init(struct drm_device *dev,
713 struct drm_framebuffer *fb,
714 const struct drm_framebuffer_funcs *funcs);
715extern void drm_framebuffer_cleanup(struct drm_framebuffer *fb);
716extern int drmfb_probe(struct drm_device *dev, struct drm_crtc *crtc);
717extern int drmfb_remove(struct drm_device *dev, struct drm_framebuffer *fb);
718extern void drm_crtc_probe_connector_modes(struct drm_device *dev, int maxX, int maxY);
719extern bool drm_crtc_in_use(struct drm_crtc *crtc);
720
721extern int drm_connector_attach_property(struct drm_connector *connector,
722 struct drm_property *property, uint64_t init_val);
723extern struct drm_property *drm_property_create(struct drm_device *dev, int flags,
724 const char *name, int num_values);
725extern void drm_property_destroy(struct drm_device *dev, struct drm_property *property);
726extern int drm_property_add_enum(struct drm_property *property, int index,
727 uint64_t value, const char *name);
728extern int drm_mode_create_dvi_i_properties(struct drm_device *dev);
729extern int drm_mode_create_tv_properties(struct drm_device *dev, int num_formats,
730 char *formats[]);
731extern int drm_mode_create_scaling_mode_property(struct drm_device *dev);
732extern int drm_mode_create_dithering_property(struct drm_device *dev);
733extern int drm_mode_create_dirty_info_property(struct drm_device *dev);
734extern char *drm_get_encoder_name(struct drm_encoder *encoder);
735
736extern int drm_mode_connector_attach_encoder(struct drm_connector *connector,
737 struct drm_encoder *encoder);
738extern void drm_mode_connector_detach_encoder(struct drm_connector *connector,
739 struct drm_encoder *encoder);
740extern bool drm_mode_crtc_set_gamma_size(struct drm_crtc *crtc,
741 int gamma_size);
742extern struct drm_mode_object *drm_mode_object_find(struct drm_device *dev,
743 uint32_t id, uint32_t type);
744/* IOCTLs */
745extern int drm_mode_getresources(struct drm_device *dev,
746 void *data, struct drm_file *file_priv);
747
748extern int drm_mode_getcrtc(struct drm_device *dev,
749 void *data, struct drm_file *file_priv);
750extern int drm_mode_getconnector(struct drm_device *dev,
751 void *data, struct drm_file *file_priv);
752extern int drm_mode_setcrtc(struct drm_device *dev,
753 void *data, struct drm_file *file_priv);
754extern int drm_mode_cursor_ioctl(struct drm_device *dev,
755 void *data, struct drm_file *file_priv);
756extern int drm_mode_addfb(struct drm_device *dev,
757 void *data, struct drm_file *file_priv);
758extern int drm_mode_rmfb(struct drm_device *dev,
759 void *data, struct drm_file *file_priv);
760extern int drm_mode_getfb(struct drm_device *dev,
761 void *data, struct drm_file *file_priv);
762extern int drm_mode_dirtyfb_ioctl(struct drm_device *dev,
763 void *data, struct drm_file *file_priv);
764extern int drm_mode_addmode_ioctl(struct drm_device *dev,
765 void *data, struct drm_file *file_priv);
766extern int drm_mode_rmmode_ioctl(struct drm_device *dev,
767 void *data, struct drm_file *file_priv);
768extern int drm_mode_attachmode_ioctl(struct drm_device *dev,
769 void *data, struct drm_file *file_priv);
770extern int drm_mode_detachmode_ioctl(struct drm_device *dev,
771 void *data, struct drm_file *file_priv);
772
773extern int drm_mode_getproperty_ioctl(struct drm_device *dev,
774 void *data, struct drm_file *file_priv);
775extern int drm_mode_getblob_ioctl(struct drm_device *dev,
776 void *data, struct drm_file *file_priv);
777extern int drm_mode_connector_property_set_ioctl(struct drm_device *dev,
778 void *data, struct drm_file *file_priv);
779extern int drm_mode_hotplug_ioctl(struct drm_device *dev,
780 void *data, struct drm_file *file_priv);
781extern int drm_mode_replacefb(struct drm_device *dev,
782 void *data, struct drm_file *file_priv);
783extern int drm_mode_getencoder(struct drm_device *dev,
784 void *data, struct drm_file *file_priv);
785extern int drm_mode_gamma_get_ioctl(struct drm_device *dev,
786 void *data, struct drm_file *file_priv);
787extern int drm_mode_gamma_set_ioctl(struct drm_device *dev,
788 void *data, struct drm_file *file_priv);
789extern u8 *drm_find_cea_extension(struct edid *edid);
790extern bool drm_detect_hdmi_monitor(struct edid *edid);
791extern bool drm_detect_monitor_audio(struct edid *edid);
792extern int drm_mode_page_flip_ioctl(struct drm_device *dev,
793 void *data, struct drm_file *file_priv);
794extern struct drm_display_mode *drm_cvt_mode(struct drm_device *dev,
795 int hdisplay, int vdisplay, int vrefresh,
796 bool reduced, bool interlaced, bool margins);
797extern struct drm_display_mode *drm_gtf_mode(struct drm_device *dev,
798 int hdisplay, int vdisplay, int vrefresh,
799 bool interlaced, int margins);
800extern struct drm_display_mode *drm_gtf_mode_complex(struct drm_device *dev,
801 int hdisplay, int vdisplay, int vrefresh,
802 bool interlaced, int margins, int GTF_M,
803 int GTF_2C, int GTF_K, int GTF_2J);
804extern int drm_add_modes_noedid(struct drm_connector *connector,
805 int hdisplay, int vdisplay);
806
807extern int drm_edid_header_is_valid(const u8 *raw_edid);
808extern bool drm_edid_is_valid(struct edid *edid);
809struct drm_display_mode *drm_mode_find_dmt(struct drm_device *dev,
810 int hsize, int vsize, int fresh);
811
812extern int drm_mode_create_dumb_ioctl(struct drm_device *dev,
813 void *data, struct drm_file *file_priv);
814extern int drm_mode_mmap_dumb_ioctl(struct drm_device *dev,
815 void *data, struct drm_file *file_priv);
816extern int drm_mode_destroy_dumb_ioctl(struct drm_device *dev,
817 void *data, struct drm_file *file_priv);
818#endif /* __DRM_CRTC_H__ */
1/*
2 * Copyright © 2006 Keith Packard
3 * Copyright © 2007-2008 Dave Airlie
4 * Copyright © 2007-2008 Intel Corporation
5 * Jesse Barnes <jesse.barnes@intel.com>
6 *
7 * Permission is hereby granted, free of charge, to any person obtaining a
8 * copy of this software and associated documentation files (the "Software"),
9 * to deal in the Software without restriction, including without limitation
10 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
11 * and/or sell copies of the Software, and to permit persons to whom the
12 * Software is furnished to do so, subject to the following conditions:
13 *
14 * The above copyright notice and this permission notice shall be included in
15 * all copies or substantial portions of the Software.
16 *
17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
18 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
19 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
20 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
21 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
22 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
23 * OTHER DEALINGS IN THE SOFTWARE.
24 */
25#ifndef __DRM_CRTC_H__
26#define __DRM_CRTC_H__
27
28#include <linux/i2c.h>
29#include <linux/spinlock.h>
30#include <linux/types.h>
31#include <linux/fb.h>
32#include <linux/hdmi.h>
33#include <linux/media-bus-format.h>
34#include <uapi/drm/drm_mode.h>
35#include <uapi/drm/drm_fourcc.h>
36#include <drm/drm_modeset_lock.h>
37#include <drm/drm_rect.h>
38#include <drm/drm_mode_object.h>
39#include <drm/drm_framebuffer.h>
40#include <drm/drm_modes.h>
41#include <drm/drm_connector.h>
42#include <drm/drm_encoder.h>
43#include <drm/drm_property.h>
44#include <drm/drm_bridge.h>
45#include <drm/drm_edid.h>
46#include <drm/drm_plane.h>
47#include <drm/drm_blend.h>
48#include <drm/drm_color_mgmt.h>
49#include <drm/drm_debugfs_crc.h>
50#include <drm/drm_mode_config.h>
51
52struct drm_device;
53struct drm_mode_set;
54struct drm_file;
55struct drm_clip_rect;
56struct drm_printer;
57struct device_node;
58struct dma_fence;
59struct edid;
60
61static inline int64_t U642I64(uint64_t val)
62{
63 return (int64_t)*((int64_t *)&val);
64}
65static inline uint64_t I642U64(int64_t val)
66{
67 return (uint64_t)*((uint64_t *)&val);
68}
69
70struct drm_crtc;
71struct drm_encoder;
72struct drm_pending_vblank_event;
73struct drm_plane;
74struct drm_bridge;
75struct drm_atomic_state;
76
77struct drm_crtc_helper_funcs;
78struct drm_encoder_helper_funcs;
79struct drm_plane_helper_funcs;
80
81/**
82 * struct drm_crtc_state - mutable CRTC state
83 * @crtc: backpointer to the CRTC
84 * @enable: whether the CRTC should be enabled, gates all other state
85 * @active: whether the CRTC is actively displaying (used for DPMS)
86 * @planes_changed: planes on this crtc are updated
87 * @mode_changed: crtc_state->mode or crtc_state->enable has been changed
88 * @active_changed: crtc_state->active has been toggled.
89 * @connectors_changed: connectors to this crtc have been updated
90 * @zpos_changed: zpos values of planes on this crtc have been updated
91 * @color_mgmt_changed: color management properties have changed (degamma or
92 * gamma LUT or CSC matrix)
93 * @plane_mask: bitmask of (1 << drm_plane_index(plane)) of attached planes
94 * @connector_mask: bitmask of (1 << drm_connector_index(connector)) of attached connectors
95 * @encoder_mask: bitmask of (1 << drm_encoder_index(encoder)) of attached encoders
96 * @last_vblank_count: for helpers and drivers to capture the vblank of the
97 * update to ensure framebuffer cleanup isn't done too early
98 * @adjusted_mode: for use by helpers and drivers to compute adjusted mode timings
99 * @mode: current mode timings
100 * @mode_blob: &drm_property_blob for @mode
101 * @degamma_lut: Lookup table for converting framebuffer pixel data
102 * before apply the conversion matrix
103 * @ctm: Transformation matrix
104 * @gamma_lut: Lookup table for converting pixel data after the
105 * conversion matrix
106 * @state: backpointer to global drm_atomic_state
107 *
108 * Note that the distinction between @enable and @active is rather subtile:
109 * Flipping @active while @enable is set without changing anything else may
110 * never return in a failure from the ->atomic_check callback. Userspace assumes
111 * that a DPMS On will always succeed. In other words: @enable controls resource
112 * assignment, @active controls the actual hardware state.
113 *
114 * The three booleans active_changed, connectors_changed and mode_changed are
115 * intended to indicate whether a full modeset is needed, rather than strictly
116 * describing what has changed in a commit.
117 * See also: drm_atomic_crtc_needs_modeset()
118 */
119struct drm_crtc_state {
120 struct drm_crtc *crtc;
121
122 bool enable;
123 bool active;
124
125 /* computed state bits used by helpers and drivers */
126 bool planes_changed : 1;
127 bool mode_changed : 1;
128 bool active_changed : 1;
129 bool connectors_changed : 1;
130 bool zpos_changed : 1;
131 bool color_mgmt_changed : 1;
132
133 /* attached planes bitmask:
134 * WARNING: transitional helpers do not maintain plane_mask so
135 * drivers not converted over to atomic helpers should not rely
136 * on plane_mask being accurate!
137 */
138 u32 plane_mask;
139
140 u32 connector_mask;
141 u32 encoder_mask;
142
143 /* last_vblank_count: for vblank waits before cleanup */
144 u32 last_vblank_count;
145
146 /* adjusted_mode: for use by helpers and drivers */
147 struct drm_display_mode adjusted_mode;
148
149 struct drm_display_mode mode;
150
151 /* blob property to expose current mode to atomic userspace */
152 struct drm_property_blob *mode_blob;
153
154 /* blob property to expose color management to userspace */
155 struct drm_property_blob *degamma_lut;
156 struct drm_property_blob *ctm;
157 struct drm_property_blob *gamma_lut;
158
159 /**
160 * @event:
161 *
162 * Optional pointer to a DRM event to signal upon completion of the
163 * state update. The driver must send out the event when the atomic
164 * commit operation completes. There are two cases:
165 *
166 * - The event is for a CRTC which is being disabled through this
167 * atomic commit. In that case the event can be send out any time
168 * after the hardware has stopped scanning out the current
169 * framebuffers. It should contain the timestamp and counter for the
170 * last vblank before the display pipeline was shut off.
171 *
172 * - For a CRTC which is enabled at the end of the commit (even when it
173 * undergoes an full modeset) the vblank timestamp and counter must
174 * be for the vblank right before the first frame that scans out the
175 * new set of buffers. Again the event can only be sent out after the
176 * hardware has stopped scanning out the old buffers.
177 *
178 * - Events for disabled CRTCs are not allowed, and drivers can ignore
179 * that case.
180 *
181 * This can be handled by the drm_crtc_send_vblank_event() function,
182 * which the driver should call on the provided event upon completion of
183 * the atomic commit. Note that if the driver supports vblank signalling
184 * and timestamping the vblank counters and timestamps must agree with
185 * the ones returned from page flip events. With the current vblank
186 * helper infrastructure this can be achieved by holding a vblank
187 * reference while the page flip is pending, acquired through
188 * drm_crtc_vblank_get() and released with drm_crtc_vblank_put().
189 * Drivers are free to implement their own vblank counter and timestamp
190 * tracking though, e.g. if they have accurate timestamp registers in
191 * hardware.
192 *
193 * For hardware which supports some means to synchronize vblank
194 * interrupt delivery with committing display state there's also
195 * drm_crtc_arm_vblank_event(). See the documentation of that function
196 * for a detailed discussion of the constraints it needs to be used
197 * safely.
198 */
199 struct drm_pending_vblank_event *event;
200
201 struct drm_atomic_state *state;
202};
203
204/**
205 * struct drm_crtc_funcs - control CRTCs for a given device
206 *
207 * The drm_crtc_funcs structure is the central CRTC management structure
208 * in the DRM. Each CRTC controls one or more connectors (note that the name
209 * CRTC is simply historical, a CRTC may control LVDS, VGA, DVI, TV out, etc.
210 * connectors, not just CRTs).
211 *
212 * Each driver is responsible for filling out this structure at startup time,
213 * in addition to providing other modesetting features, like i2c and DDC
214 * bus accessors.
215 */
216struct drm_crtc_funcs {
217 /**
218 * @reset:
219 *
220 * Reset CRTC hardware and software state to off. This function isn't
221 * called by the core directly, only through drm_mode_config_reset().
222 * It's not a helper hook only for historical reasons.
223 *
224 * Atomic drivers can use drm_atomic_helper_crtc_reset() to reset
225 * atomic state using this hook.
226 */
227 void (*reset)(struct drm_crtc *crtc);
228
229 /**
230 * @cursor_set:
231 *
232 * Update the cursor image. The cursor position is relative to the CRTC
233 * and can be partially or fully outside of the visible area.
234 *
235 * Note that contrary to all other KMS functions the legacy cursor entry
236 * points don't take a framebuffer object, but instead take directly a
237 * raw buffer object id from the driver's buffer manager (which is
238 * either GEM or TTM for current drivers).
239 *
240 * This entry point is deprecated, drivers should instead implement
241 * universal plane support and register a proper cursor plane using
242 * drm_crtc_init_with_planes().
243 *
244 * This callback is optional
245 *
246 * RETURNS:
247 *
248 * 0 on success or a negative error code on failure.
249 */
250 int (*cursor_set)(struct drm_crtc *crtc, struct drm_file *file_priv,
251 uint32_t handle, uint32_t width, uint32_t height);
252
253 /**
254 * @cursor_set2:
255 *
256 * Update the cursor image, including hotspot information. The hotspot
257 * must not affect the cursor position in CRTC coordinates, but is only
258 * meant as a hint for virtualized display hardware to coordinate the
259 * guests and hosts cursor position. The cursor hotspot is relative to
260 * the cursor image. Otherwise this works exactly like @cursor_set.
261 *
262 * This entry point is deprecated, drivers should instead implement
263 * universal plane support and register a proper cursor plane using
264 * drm_crtc_init_with_planes().
265 *
266 * This callback is optional.
267 *
268 * RETURNS:
269 *
270 * 0 on success or a negative error code on failure.
271 */
272 int (*cursor_set2)(struct drm_crtc *crtc, struct drm_file *file_priv,
273 uint32_t handle, uint32_t width, uint32_t height,
274 int32_t hot_x, int32_t hot_y);
275
276 /**
277 * @cursor_move:
278 *
279 * Update the cursor position. The cursor does not need to be visible
280 * when this hook is called.
281 *
282 * This entry point is deprecated, drivers should instead implement
283 * universal plane support and register a proper cursor plane using
284 * drm_crtc_init_with_planes().
285 *
286 * This callback is optional.
287 *
288 * RETURNS:
289 *
290 * 0 on success or a negative error code on failure.
291 */
292 int (*cursor_move)(struct drm_crtc *crtc, int x, int y);
293
294 /**
295 * @gamma_set:
296 *
297 * Set gamma on the CRTC.
298 *
299 * This callback is optional.
300 *
301 * NOTE:
302 *
303 * Drivers that support gamma tables and also fbdev emulation through
304 * the provided helper library need to take care to fill out the gamma
305 * hooks for both. Currently there's a bit an unfortunate duplication
306 * going on, which should eventually be unified to just one set of
307 * hooks.
308 */
309 int (*gamma_set)(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b,
310 uint32_t size);
311
312 /**
313 * @destroy:
314 *
315 * Clean up plane resources. This is only called at driver unload time
316 * through drm_mode_config_cleanup() since a CRTC cannot be hotplugged
317 * in DRM.
318 */
319 void (*destroy)(struct drm_crtc *crtc);
320
321 /**
322 * @set_config:
323 *
324 * This is the main legacy entry point to change the modeset state on a
325 * CRTC. All the details of the desired configuration are passed in a
326 * struct &drm_mode_set - see there for details.
327 *
328 * Drivers implementing atomic modeset should use
329 * drm_atomic_helper_set_config() to implement this hook.
330 *
331 * RETURNS:
332 *
333 * 0 on success or a negative error code on failure.
334 */
335 int (*set_config)(struct drm_mode_set *set);
336
337 /**
338 * @page_flip:
339 *
340 * Legacy entry point to schedule a flip to the given framebuffer.
341 *
342 * Page flipping is a synchronization mechanism that replaces the frame
343 * buffer being scanned out by the CRTC with a new frame buffer during
344 * vertical blanking, avoiding tearing (except when requested otherwise
345 * through the DRM_MODE_PAGE_FLIP_ASYNC flag). When an application
346 * requests a page flip the DRM core verifies that the new frame buffer
347 * is large enough to be scanned out by the CRTC in the currently
348 * configured mode and then calls the CRTC ->page_flip() operation with a
349 * pointer to the new frame buffer.
350 *
351 * The driver must wait for any pending rendering to the new framebuffer
352 * to complete before executing the flip. It should also wait for any
353 * pending rendering from other drivers if the underlying buffer is a
354 * shared dma-buf.
355 *
356 * An application can request to be notified when the page flip has
357 * completed. The drm core will supply a struct &drm_event in the event
358 * parameter in this case. This can be handled by the
359 * drm_crtc_send_vblank_event() function, which the driver should call on
360 * the provided event upon completion of the flip. Note that if
361 * the driver supports vblank signalling and timestamping the vblank
362 * counters and timestamps must agree with the ones returned from page
363 * flip events. With the current vblank helper infrastructure this can
364 * be achieved by holding a vblank reference while the page flip is
365 * pending, acquired through drm_crtc_vblank_get() and released with
366 * drm_crtc_vblank_put(). Drivers are free to implement their own vblank
367 * counter and timestamp tracking though, e.g. if they have accurate
368 * timestamp registers in hardware.
369 *
370 * This callback is optional.
371 *
372 * NOTE:
373 *
374 * Very early versions of the KMS ABI mandated that the driver must
375 * block (but not reject) any rendering to the old framebuffer until the
376 * flip operation has completed and the old framebuffer is no longer
377 * visible. This requirement has been lifted, and userspace is instead
378 * expected to request delivery of an event and wait with recycling old
379 * buffers until such has been received.
380 *
381 * RETURNS:
382 *
383 * 0 on success or a negative error code on failure. Note that if a
384 * ->page_flip() operation is already pending the callback should return
385 * -EBUSY. Pageflips on a disabled CRTC (either by setting a NULL mode
386 * or just runtime disabled through DPMS respectively the new atomic
387 * "ACTIVE" state) should result in an -EINVAL error code. Note that
388 * drm_atomic_helper_page_flip() checks this already for atomic drivers.
389 */
390 int (*page_flip)(struct drm_crtc *crtc,
391 struct drm_framebuffer *fb,
392 struct drm_pending_vblank_event *event,
393 uint32_t flags);
394
395 /**
396 * @page_flip_target:
397 *
398 * Same as @page_flip but with an additional parameter specifying the
399 * absolute target vertical blank period (as reported by
400 * drm_crtc_vblank_count()) when the flip should take effect.
401 *
402 * Note that the core code calls drm_crtc_vblank_get before this entry
403 * point, and will call drm_crtc_vblank_put if this entry point returns
404 * any non-0 error code. It's the driver's responsibility to call
405 * drm_crtc_vblank_put after this entry point returns 0, typically when
406 * the flip completes.
407 */
408 int (*page_flip_target)(struct drm_crtc *crtc,
409 struct drm_framebuffer *fb,
410 struct drm_pending_vblank_event *event,
411 uint32_t flags, uint32_t target);
412
413 /**
414 * @set_property:
415 *
416 * This is the legacy entry point to update a property attached to the
417 * CRTC.
418 *
419 * Drivers implementing atomic modeset should use
420 * drm_atomic_helper_crtc_set_property() to implement this hook.
421 *
422 * This callback is optional if the driver does not support any legacy
423 * driver-private properties.
424 *
425 * RETURNS:
426 *
427 * 0 on success or a negative error code on failure.
428 */
429 int (*set_property)(struct drm_crtc *crtc,
430 struct drm_property *property, uint64_t val);
431
432 /**
433 * @atomic_duplicate_state:
434 *
435 * Duplicate the current atomic state for this CRTC and return it.
436 * The core and helpers gurantee that any atomic state duplicated with
437 * this hook and still owned by the caller (i.e. not transferred to the
438 * driver by calling ->atomic_commit() from struct
439 * &drm_mode_config_funcs) will be cleaned up by calling the
440 * @atomic_destroy_state hook in this structure.
441 *
442 * Atomic drivers which don't subclass struct &drm_crtc should use
443 * drm_atomic_helper_crtc_duplicate_state(). Drivers that subclass the
444 * state structure to extend it with driver-private state should use
445 * __drm_atomic_helper_crtc_duplicate_state() to make sure shared state is
446 * duplicated in a consistent fashion across drivers.
447 *
448 * It is an error to call this hook before crtc->state has been
449 * initialized correctly.
450 *
451 * NOTE:
452 *
453 * If the duplicate state references refcounted resources this hook must
454 * acquire a reference for each of them. The driver must release these
455 * references again in @atomic_destroy_state.
456 *
457 * RETURNS:
458 *
459 * Duplicated atomic state or NULL when the allocation failed.
460 */
461 struct drm_crtc_state *(*atomic_duplicate_state)(struct drm_crtc *crtc);
462
463 /**
464 * @atomic_destroy_state:
465 *
466 * Destroy a state duplicated with @atomic_duplicate_state and release
467 * or unreference all resources it references
468 */
469 void (*atomic_destroy_state)(struct drm_crtc *crtc,
470 struct drm_crtc_state *state);
471
472 /**
473 * @atomic_set_property:
474 *
475 * Decode a driver-private property value and store the decoded value
476 * into the passed-in state structure. Since the atomic core decodes all
477 * standardized properties (even for extensions beyond the core set of
478 * properties which might not be implemented by all drivers) this
479 * requires drivers to subclass the state structure.
480 *
481 * Such driver-private properties should really only be implemented for
482 * truly hardware/vendor specific state. Instead it is preferred to
483 * standardize atomic extension and decode the properties used to expose
484 * such an extension in the core.
485 *
486 * Do not call this function directly, use
487 * drm_atomic_crtc_set_property() instead.
488 *
489 * This callback is optional if the driver does not support any
490 * driver-private atomic properties.
491 *
492 * NOTE:
493 *
494 * This function is called in the state assembly phase of atomic
495 * modesets, which can be aborted for any reason (including on
496 * userspace's request to just check whether a configuration would be
497 * possible). Drivers MUST NOT touch any persistent state (hardware or
498 * software) or data structures except the passed in @state parameter.
499 *
500 * Also since userspace controls in which order properties are set this
501 * function must not do any input validation (since the state update is
502 * incomplete and hence likely inconsistent). Instead any such input
503 * validation must be done in the various atomic_check callbacks.
504 *
505 * RETURNS:
506 *
507 * 0 if the property has been found, -EINVAL if the property isn't
508 * implemented by the driver (which should never happen, the core only
509 * asks for properties attached to this CRTC). No other validation is
510 * allowed by the driver. The core already checks that the property
511 * value is within the range (integer, valid enum value, ...) the driver
512 * set when registering the property.
513 */
514 int (*atomic_set_property)(struct drm_crtc *crtc,
515 struct drm_crtc_state *state,
516 struct drm_property *property,
517 uint64_t val);
518 /**
519 * @atomic_get_property:
520 *
521 * Reads out the decoded driver-private property. This is used to
522 * implement the GETCRTC IOCTL.
523 *
524 * Do not call this function directly, use
525 * drm_atomic_crtc_get_property() instead.
526 *
527 * This callback is optional if the driver does not support any
528 * driver-private atomic properties.
529 *
530 * RETURNS:
531 *
532 * 0 on success, -EINVAL if the property isn't implemented by the
533 * driver (which should never happen, the core only asks for
534 * properties attached to this CRTC).
535 */
536 int (*atomic_get_property)(struct drm_crtc *crtc,
537 const struct drm_crtc_state *state,
538 struct drm_property *property,
539 uint64_t *val);
540
541 /**
542 * @late_register:
543 *
544 * This optional hook can be used to register additional userspace
545 * interfaces attached to the crtc like debugfs interfaces.
546 * It is called late in the driver load sequence from drm_dev_register().
547 * Everything added from this callback should be unregistered in
548 * the early_unregister callback.
549 *
550 * Returns:
551 *
552 * 0 on success, or a negative error code on failure.
553 */
554 int (*late_register)(struct drm_crtc *crtc);
555
556 /**
557 * @early_unregister:
558 *
559 * This optional hook should be used to unregister the additional
560 * userspace interfaces attached to the crtc from
561 * late_unregister(). It is called from drm_dev_unregister(),
562 * early in the driver unload sequence to disable userspace access
563 * before data structures are torndown.
564 */
565 void (*early_unregister)(struct drm_crtc *crtc);
566
567 /**
568 * @set_crc_source:
569 *
570 * Changes the source of CRC checksums of frames at the request of
571 * userspace, typically for testing purposes. The sources available are
572 * specific of each driver and a %NULL value indicates that CRC
573 * generation is to be switched off.
574 *
575 * When CRC generation is enabled, the driver should call
576 * drm_crtc_add_crc_entry() at each frame, providing any information
577 * that characterizes the frame contents in the crcN arguments, as
578 * provided from the configured source. Drivers must accept a "auto"
579 * source name that will select a default source for this CRTC.
580 *
581 * This callback is optional if the driver does not support any CRC
582 * generation functionality.
583 *
584 * RETURNS:
585 *
586 * 0 on success or a negative error code on failure.
587 */
588 int (*set_crc_source)(struct drm_crtc *crtc, const char *source,
589 size_t *values_cnt);
590
591 /**
592 * @atomic_print_state:
593 *
594 * If driver subclasses struct &drm_crtc_state, it should implement
595 * this optional hook for printing additional driver specific state.
596 *
597 * Do not call this directly, use drm_atomic_crtc_print_state()
598 * instead.
599 */
600 void (*atomic_print_state)(struct drm_printer *p,
601 const struct drm_crtc_state *state);
602};
603
604/**
605 * struct drm_crtc - central CRTC control structure
606 * @dev: parent DRM device
607 * @port: OF node used by drm_of_find_possible_crtcs()
608 * @head: list management
609 * @name: human readable name, can be overwritten by the driver
610 * @mutex: per-CRTC locking
611 * @base: base KMS object for ID tracking etc.
612 * @primary: primary plane for this CRTC
613 * @cursor: cursor plane for this CRTC
614 * @cursor_x: current x position of the cursor, used for universal cursor planes
615 * @cursor_y: current y position of the cursor, used for universal cursor planes
616 * @enabled: is this CRTC enabled?
617 * @mode: current mode timings
618 * @hwmode: mode timings as programmed to hw regs
619 * @x: x position on screen
620 * @y: y position on screen
621 * @funcs: CRTC control functions
622 * @gamma_size: size of gamma ramp
623 * @gamma_store: gamma ramp values
624 * @helper_private: mid-layer private data
625 * @properties: property tracking for this CRTC
626 *
627 * Each CRTC may have one or more connectors associated with it. This structure
628 * allows the CRTC to be controlled.
629 */
630struct drm_crtc {
631 struct drm_device *dev;
632 struct device_node *port;
633 struct list_head head;
634
635 char *name;
636
637 /**
638 * @mutex:
639 *
640 * This provides a read lock for the overall crtc state (mode, dpms
641 * state, ...) and a write lock for everything which can be update
642 * without a full modeset (fb, cursor data, crtc properties ...). Full
643 * modeset also need to grab dev->mode_config.connection_mutex.
644 */
645 struct drm_modeset_lock mutex;
646
647 struct drm_mode_object base;
648
649 /* primary and cursor planes for CRTC */
650 struct drm_plane *primary;
651 struct drm_plane *cursor;
652
653 /**
654 * @index: Position inside the mode_config.list, can be used as an array
655 * index. It is invariant over the lifetime of the CRTC.
656 */
657 unsigned index;
658
659 /* position of cursor plane on crtc */
660 int cursor_x;
661 int cursor_y;
662
663 bool enabled;
664
665 /* Requested mode from modesetting. */
666 struct drm_display_mode mode;
667
668 /* Programmed mode in hw, after adjustments for encoders,
669 * crtc, panel scaling etc. Needed for timestamping etc.
670 */
671 struct drm_display_mode hwmode;
672
673 int x, y;
674 const struct drm_crtc_funcs *funcs;
675
676 /* Legacy FB CRTC gamma size for reporting to userspace */
677 uint32_t gamma_size;
678 uint16_t *gamma_store;
679
680 /* if you are using the helper */
681 const struct drm_crtc_helper_funcs *helper_private;
682
683 struct drm_object_properties properties;
684
685 /**
686 * @state:
687 *
688 * Current atomic state for this CRTC.
689 */
690 struct drm_crtc_state *state;
691
692 /**
693 * @commit_list:
694 *
695 * List of &drm_crtc_commit structures tracking pending commits.
696 * Protected by @commit_lock. This list doesn't hold its own full
697 * reference, but burrows it from the ongoing commit. Commit entries
698 * must be removed from this list once the commit is fully completed,
699 * but before it's correspoding &drm_atomic_state gets destroyed.
700 */
701 struct list_head commit_list;
702
703 /**
704 * @commit_lock:
705 *
706 * Spinlock to protect @commit_list.
707 */
708 spinlock_t commit_lock;
709
710 /**
711 * @acquire_ctx:
712 *
713 * Per-CRTC implicit acquire context used by atomic drivers for legacy
714 * IOCTLs, so that atomic drivers can get at the locking acquire
715 * context.
716 */
717 struct drm_modeset_acquire_ctx *acquire_ctx;
718
719#ifdef CONFIG_DEBUG_FS
720 /**
721 * @debugfs_entry:
722 *
723 * Debugfs directory for this CRTC.
724 */
725 struct dentry *debugfs_entry;
726
727 /**
728 * @crc:
729 *
730 * Configuration settings of CRC capture.
731 */
732 struct drm_crtc_crc crc;
733#endif
734
735 /**
736 * @fence_context:
737 *
738 * timeline context used for fence operations.
739 */
740 unsigned int fence_context;
741
742 /**
743 * @fence_lock:
744 *
745 * spinlock to protect the fences in the fence_context.
746 */
747
748 spinlock_t fence_lock;
749 /**
750 * @fence_seqno:
751 *
752 * Seqno variable used as monotonic counter for the fences
753 * created on the CRTC's timeline.
754 */
755 unsigned long fence_seqno;
756
757 /**
758 * @timeline_name:
759 *
760 * The name of the CRTC's fence timeline.
761 */
762 char timeline_name[32];
763};
764
765/**
766 * struct drm_mode_set - new values for a CRTC config change
767 * @fb: framebuffer to use for new config
768 * @crtc: CRTC whose configuration we're about to change
769 * @mode: mode timings to use
770 * @x: position of this CRTC relative to @fb
771 * @y: position of this CRTC relative to @fb
772 * @connectors: array of connectors to drive with this CRTC if possible
773 * @num_connectors: size of @connectors array
774 *
775 * Represents a single crtc the connectors that it drives with what mode
776 * and from which framebuffer it scans out from.
777 *
778 * This is used to set modes.
779 */
780struct drm_mode_set {
781 struct drm_framebuffer *fb;
782 struct drm_crtc *crtc;
783 struct drm_display_mode *mode;
784
785 uint32_t x;
786 uint32_t y;
787
788 struct drm_connector **connectors;
789 size_t num_connectors;
790};
791
792#define obj_to_crtc(x) container_of(x, struct drm_crtc, base)
793
794__printf(6, 7)
795int drm_crtc_init_with_planes(struct drm_device *dev,
796 struct drm_crtc *crtc,
797 struct drm_plane *primary,
798 struct drm_plane *cursor,
799 const struct drm_crtc_funcs *funcs,
800 const char *name, ...);
801void drm_crtc_cleanup(struct drm_crtc *crtc);
802
803/**
804 * drm_crtc_index - find the index of a registered CRTC
805 * @crtc: CRTC to find index for
806 *
807 * Given a registered CRTC, return the index of that CRTC within a DRM
808 * device's list of CRTCs.
809 */
810static inline unsigned int drm_crtc_index(const struct drm_crtc *crtc)
811{
812 return crtc->index;
813}
814
815/**
816 * drm_crtc_mask - find the mask of a registered CRTC
817 * @crtc: CRTC to find mask for
818 *
819 * Given a registered CRTC, return the mask bit of that CRTC for an
820 * encoder's possible_crtcs field.
821 */
822static inline uint32_t drm_crtc_mask(const struct drm_crtc *crtc)
823{
824 return 1 << drm_crtc_index(crtc);
825}
826
827void drm_crtc_get_hv_timing(const struct drm_display_mode *mode,
828 int *hdisplay, int *vdisplay);
829int drm_crtc_force_disable(struct drm_crtc *crtc);
830int drm_crtc_force_disable_all(struct drm_device *dev);
831
832int drm_mode_set_config_internal(struct drm_mode_set *set);
833
834/* Helpers */
835static inline struct drm_crtc *drm_crtc_find(struct drm_device *dev,
836 uint32_t id)
837{
838 struct drm_mode_object *mo;
839 mo = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_CRTC);
840 return mo ? obj_to_crtc(mo) : NULL;
841}
842
843#define drm_for_each_crtc(crtc, dev) \
844 list_for_each_entry(crtc, &(dev)->mode_config.crtc_list, head)
845
846static inline void
847assert_drm_connector_list_read_locked(struct drm_mode_config *mode_config)
848{
849 /*
850 * The connector hotadd/remove code currently grabs both locks when
851 * updating lists. Hence readers need only hold either of them to be
852 * safe and the check amounts to
853 *
854 * WARN_ON(not_holding(A) && not_holding(B)).
855 */
856 WARN_ON(!mutex_is_locked(&mode_config->mutex) &&
857 !drm_modeset_is_locked(&mode_config->connection_mutex));
858}
859
860#endif /* __DRM_CRTC_H__ */