Loading...
1/* Driver for USB Mass Storage compliant devices
2 *
3 * Current development and maintenance by:
4 * (c) 1999-2003 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
5 *
6 * Developed with the assistance of:
7 * (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
8 * (c) 2003-2009 Alan Stern (stern@rowland.harvard.edu)
9 *
10 * Initial work by:
11 * (c) 1999 Michael Gee (michael@linuxspecific.com)
12 *
13 * usb_device_id support by Adam J. Richter (adam@yggdrasil.com):
14 * (c) 2000 Yggdrasil Computing, Inc.
15 *
16 * This driver is based on the 'USB Mass Storage Class' document. This
17 * describes in detail the protocol used to communicate with such
18 * devices. Clearly, the designers had SCSI and ATAPI commands in
19 * mind when they created this document. The commands are all very
20 * similar to commands in the SCSI-II and ATAPI specifications.
21 *
22 * It is important to note that in a number of cases this class
23 * exhibits class-specific exemptions from the USB specification.
24 * Notably the usage of NAK, STALL and ACK differs from the norm, in
25 * that they are used to communicate wait, failed and OK on commands.
26 *
27 * Also, for certain devices, the interrupt endpoint is used to convey
28 * status of a command.
29 *
30 * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
31 * information about this driver.
32 *
33 * This program is free software; you can redistribute it and/or modify it
34 * under the terms of the GNU General Public License as published by the
35 * Free Software Foundation; either version 2, or (at your option) any
36 * later version.
37 *
38 * This program is distributed in the hope that it will be useful, but
39 * WITHOUT ANY WARRANTY; without even the implied warranty of
40 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
41 * General Public License for more details.
42 *
43 * You should have received a copy of the GNU General Public License along
44 * with this program; if not, write to the Free Software Foundation, Inc.,
45 * 675 Mass Ave, Cambridge, MA 02139, USA.
46 */
47
48#ifdef CONFIG_USB_STORAGE_DEBUG
49#define DEBUG
50#endif
51
52#include <linux/sched.h>
53#include <linux/errno.h>
54#include <linux/freezer.h>
55#include <linux/module.h>
56#include <linux/init.h>
57#include <linux/slab.h>
58#include <linux/kthread.h>
59#include <linux/mutex.h>
60#include <linux/utsname.h>
61
62#include <scsi/scsi.h>
63#include <scsi/scsi_cmnd.h>
64#include <scsi/scsi_device.h>
65
66#include "usb.h"
67#include "scsiglue.h"
68#include "transport.h"
69#include "protocol.h"
70#include "debug.h"
71#include "initializers.h"
72
73#include "sierra_ms.h"
74#include "option_ms.h"
75
76/* Some informational data */
77MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>");
78MODULE_DESCRIPTION("USB Mass Storage driver for Linux");
79MODULE_LICENSE("GPL");
80
81static unsigned int delay_use = 1;
82module_param(delay_use, uint, S_IRUGO | S_IWUSR);
83MODULE_PARM_DESC(delay_use, "seconds to delay before using a new device");
84
85static char quirks[128];
86module_param_string(quirks, quirks, sizeof(quirks), S_IRUGO | S_IWUSR);
87MODULE_PARM_DESC(quirks, "supplemental list of device IDs and their quirks");
88
89
90/*
91 * The entries in this table correspond, line for line,
92 * with the entries in usb_storage_usb_ids[], defined in usual-tables.c.
93 */
94
95/* The vendor name should be kept at eight characters or less, and
96 * the product name should be kept at 16 characters or less. If a device
97 * has the US_FL_FIX_INQUIRY flag, then the vendor and product names
98 * normally generated by a device thorugh the INQUIRY response will be
99 * taken from this list, and this is the reason for the above size
100 * restriction. However, if the flag is not present, then you
101 * are free to use as many characters as you like.
102 */
103
104#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
105 vendor_name, product_name, use_protocol, use_transport, \
106 init_function, Flags) \
107{ \
108 .vendorName = vendor_name, \
109 .productName = product_name, \
110 .useProtocol = use_protocol, \
111 .useTransport = use_transport, \
112 .initFunction = init_function, \
113}
114
115#define COMPLIANT_DEV UNUSUAL_DEV
116
117#define USUAL_DEV(use_protocol, use_transport, use_type) \
118{ \
119 .useProtocol = use_protocol, \
120 .useTransport = use_transport, \
121}
122
123static struct us_unusual_dev us_unusual_dev_list[] = {
124# include "unusual_devs.h"
125 { } /* Terminating entry */
126};
127
128#undef UNUSUAL_DEV
129#undef COMPLIANT_DEV
130#undef USUAL_DEV
131
132
133#ifdef CONFIG_PM /* Minimal support for suspend and resume */
134
135int usb_stor_suspend(struct usb_interface *iface, pm_message_t message)
136{
137 struct us_data *us = usb_get_intfdata(iface);
138
139 /* Wait until no command is running */
140 mutex_lock(&us->dev_mutex);
141
142 US_DEBUGP("%s\n", __func__);
143 if (us->suspend_resume_hook)
144 (us->suspend_resume_hook)(us, US_SUSPEND);
145
146 /* When runtime PM is working, we'll set a flag to indicate
147 * whether we should autoresume when a SCSI request arrives. */
148
149 mutex_unlock(&us->dev_mutex);
150 return 0;
151}
152EXPORT_SYMBOL_GPL(usb_stor_suspend);
153
154int usb_stor_resume(struct usb_interface *iface)
155{
156 struct us_data *us = usb_get_intfdata(iface);
157
158 mutex_lock(&us->dev_mutex);
159
160 US_DEBUGP("%s\n", __func__);
161 if (us->suspend_resume_hook)
162 (us->suspend_resume_hook)(us, US_RESUME);
163
164 mutex_unlock(&us->dev_mutex);
165 return 0;
166}
167EXPORT_SYMBOL_GPL(usb_stor_resume);
168
169int usb_stor_reset_resume(struct usb_interface *iface)
170{
171 struct us_data *us = usb_get_intfdata(iface);
172
173 US_DEBUGP("%s\n", __func__);
174
175 /* Report the reset to the SCSI core */
176 usb_stor_report_bus_reset(us);
177
178 /* FIXME: Notify the subdrivers that they need to reinitialize
179 * the device */
180 return 0;
181}
182EXPORT_SYMBOL_GPL(usb_stor_reset_resume);
183
184#endif /* CONFIG_PM */
185
186/*
187 * The next two routines get called just before and just after
188 * a USB port reset, whether from this driver or a different one.
189 */
190
191int usb_stor_pre_reset(struct usb_interface *iface)
192{
193 struct us_data *us = usb_get_intfdata(iface);
194
195 US_DEBUGP("%s\n", __func__);
196
197 /* Make sure no command runs during the reset */
198 mutex_lock(&us->dev_mutex);
199 return 0;
200}
201EXPORT_SYMBOL_GPL(usb_stor_pre_reset);
202
203int usb_stor_post_reset(struct usb_interface *iface)
204{
205 struct us_data *us = usb_get_intfdata(iface);
206
207 US_DEBUGP("%s\n", __func__);
208
209 /* Report the reset to the SCSI core */
210 usb_stor_report_bus_reset(us);
211
212 /* FIXME: Notify the subdrivers that they need to reinitialize
213 * the device */
214
215 mutex_unlock(&us->dev_mutex);
216 return 0;
217}
218EXPORT_SYMBOL_GPL(usb_stor_post_reset);
219
220/*
221 * fill_inquiry_response takes an unsigned char array (which must
222 * be at least 36 characters) and populates the vendor name,
223 * product name, and revision fields. Then the array is copied
224 * into the SCSI command's response buffer (oddly enough
225 * called request_buffer). data_len contains the length of the
226 * data array, which again must be at least 36.
227 */
228
229void fill_inquiry_response(struct us_data *us, unsigned char *data,
230 unsigned int data_len)
231{
232 if (data_len<36) // You lose.
233 return;
234
235 memset(data+8, ' ', 28);
236 if(data[0]&0x20) { /* USB device currently not connected. Return
237 peripheral qualifier 001b ("...however, the
238 physical device is not currently connected
239 to this logical unit") and leave vendor and
240 product identification empty. ("If the target
241 does store some of the INQUIRY data on the
242 device, it may return zeros or ASCII spaces
243 (20h) in those fields until the data is
244 available from the device."). */
245 } else {
246 u16 bcdDevice = le16_to_cpu(us->pusb_dev->descriptor.bcdDevice);
247 int n;
248
249 n = strlen(us->unusual_dev->vendorName);
250 memcpy(data+8, us->unusual_dev->vendorName, min(8, n));
251 n = strlen(us->unusual_dev->productName);
252 memcpy(data+16, us->unusual_dev->productName, min(16, n));
253
254 data[32] = 0x30 + ((bcdDevice>>12) & 0x0F);
255 data[33] = 0x30 + ((bcdDevice>>8) & 0x0F);
256 data[34] = 0x30 + ((bcdDevice>>4) & 0x0F);
257 data[35] = 0x30 + ((bcdDevice) & 0x0F);
258 }
259
260 usb_stor_set_xfer_buf(data, data_len, us->srb);
261}
262EXPORT_SYMBOL_GPL(fill_inquiry_response);
263
264static int usb_stor_control_thread(void * __us)
265{
266 struct us_data *us = (struct us_data *)__us;
267 struct Scsi_Host *host = us_to_host(us);
268
269 for(;;) {
270 US_DEBUGP("*** thread sleeping.\n");
271 if (wait_for_completion_interruptible(&us->cmnd_ready))
272 break;
273
274 US_DEBUGP("*** thread awakened.\n");
275
276 /* lock the device pointers */
277 mutex_lock(&(us->dev_mutex));
278
279 /* lock access to the state */
280 scsi_lock(host);
281
282 /* When we are called with no command pending, we're done */
283 if (us->srb == NULL) {
284 scsi_unlock(host);
285 mutex_unlock(&us->dev_mutex);
286 US_DEBUGP("-- exiting\n");
287 break;
288 }
289
290 /* has the command timed out *already* ? */
291 if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
292 us->srb->result = DID_ABORT << 16;
293 goto SkipForAbort;
294 }
295
296 scsi_unlock(host);
297
298 /* reject the command if the direction indicator
299 * is UNKNOWN
300 */
301 if (us->srb->sc_data_direction == DMA_BIDIRECTIONAL) {
302 US_DEBUGP("UNKNOWN data direction\n");
303 us->srb->result = DID_ERROR << 16;
304 }
305
306 /* reject if target != 0 or if LUN is higher than
307 * the maximum known LUN
308 */
309 else if (us->srb->device->id &&
310 !(us->fflags & US_FL_SCM_MULT_TARG)) {
311 US_DEBUGP("Bad target number (%d:%d)\n",
312 us->srb->device->id, us->srb->device->lun);
313 us->srb->result = DID_BAD_TARGET << 16;
314 }
315
316 else if (us->srb->device->lun > us->max_lun) {
317 US_DEBUGP("Bad LUN (%d:%d)\n",
318 us->srb->device->id, us->srb->device->lun);
319 us->srb->result = DID_BAD_TARGET << 16;
320 }
321
322 /* Handle those devices which need us to fake
323 * their inquiry data */
324 else if ((us->srb->cmnd[0] == INQUIRY) &&
325 (us->fflags & US_FL_FIX_INQUIRY)) {
326 unsigned char data_ptr[36] = {
327 0x00, 0x80, 0x02, 0x02,
328 0x1F, 0x00, 0x00, 0x00};
329
330 US_DEBUGP("Faking INQUIRY command\n");
331 fill_inquiry_response(us, data_ptr, 36);
332 us->srb->result = SAM_STAT_GOOD;
333 }
334
335 /* we've got a command, let's do it! */
336 else {
337 US_DEBUG(usb_stor_show_command(us->srb));
338 us->proto_handler(us->srb, us);
339 usb_mark_last_busy(us->pusb_dev);
340 }
341
342 /* lock access to the state */
343 scsi_lock(host);
344
345 /* indicate that the command is done */
346 if (us->srb->result != DID_ABORT << 16) {
347 US_DEBUGP("scsi cmd done, result=0x%x\n",
348 us->srb->result);
349 us->srb->scsi_done(us->srb);
350 } else {
351SkipForAbort:
352 US_DEBUGP("scsi command aborted\n");
353 }
354
355 /* If an abort request was received we need to signal that
356 * the abort has finished. The proper test for this is
357 * the TIMED_OUT flag, not srb->result == DID_ABORT, because
358 * the timeout might have occurred after the command had
359 * already completed with a different result code. */
360 if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
361 complete(&(us->notify));
362
363 /* Allow USB transfers to resume */
364 clear_bit(US_FLIDX_ABORTING, &us->dflags);
365 clear_bit(US_FLIDX_TIMED_OUT, &us->dflags);
366 }
367
368 /* finished working on this command */
369 us->srb = NULL;
370 scsi_unlock(host);
371
372 /* unlock the device pointers */
373 mutex_unlock(&us->dev_mutex);
374 } /* for (;;) */
375
376 /* Wait until we are told to stop */
377 for (;;) {
378 set_current_state(TASK_INTERRUPTIBLE);
379 if (kthread_should_stop())
380 break;
381 schedule();
382 }
383 __set_current_state(TASK_RUNNING);
384 return 0;
385}
386
387/***********************************************************************
388 * Device probing and disconnecting
389 ***********************************************************************/
390
391/* Associate our private data with the USB device */
392static int associate_dev(struct us_data *us, struct usb_interface *intf)
393{
394 US_DEBUGP("-- %s\n", __func__);
395
396 /* Fill in the device-related fields */
397 us->pusb_dev = interface_to_usbdev(intf);
398 us->pusb_intf = intf;
399 us->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
400 US_DEBUGP("Vendor: 0x%04x, Product: 0x%04x, Revision: 0x%04x\n",
401 le16_to_cpu(us->pusb_dev->descriptor.idVendor),
402 le16_to_cpu(us->pusb_dev->descriptor.idProduct),
403 le16_to_cpu(us->pusb_dev->descriptor.bcdDevice));
404 US_DEBUGP("Interface Subclass: 0x%02x, Protocol: 0x%02x\n",
405 intf->cur_altsetting->desc.bInterfaceSubClass,
406 intf->cur_altsetting->desc.bInterfaceProtocol);
407
408 /* Store our private data in the interface */
409 usb_set_intfdata(intf, us);
410
411 /* Allocate the control/setup and DMA-mapped buffers */
412 us->cr = kmalloc(sizeof(*us->cr), GFP_KERNEL);
413 if (!us->cr) {
414 US_DEBUGP("usb_ctrlrequest allocation failed\n");
415 return -ENOMEM;
416 }
417
418 us->iobuf = usb_alloc_coherent(us->pusb_dev, US_IOBUF_SIZE,
419 GFP_KERNEL, &us->iobuf_dma);
420 if (!us->iobuf) {
421 US_DEBUGP("I/O buffer allocation failed\n");
422 return -ENOMEM;
423 }
424 return 0;
425}
426
427/* Works only for digits and letters, but small and fast */
428#define TOLOWER(x) ((x) | 0x20)
429
430/* Adjust device flags based on the "quirks=" module parameter */
431static void adjust_quirks(struct us_data *us)
432{
433 char *p;
434 u16 vid = le16_to_cpu(us->pusb_dev->descriptor.idVendor);
435 u16 pid = le16_to_cpu(us->pusb_dev->descriptor.idProduct);
436 unsigned f = 0;
437 unsigned int mask = (US_FL_SANE_SENSE | US_FL_BAD_SENSE |
438 US_FL_FIX_CAPACITY |
439 US_FL_CAPACITY_HEURISTICS | US_FL_IGNORE_DEVICE |
440 US_FL_NOT_LOCKABLE | US_FL_MAX_SECTORS_64 |
441 US_FL_CAPACITY_OK | US_FL_IGNORE_RESIDUE |
442 US_FL_SINGLE_LUN | US_FL_NO_WP_DETECT |
443 US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16 |
444 US_FL_INITIAL_READ10);
445
446 p = quirks;
447 while (*p) {
448 /* Each entry consists of VID:PID:flags */
449 if (vid == simple_strtoul(p, &p, 16) &&
450 *p == ':' &&
451 pid == simple_strtoul(p+1, &p, 16) &&
452 *p == ':')
453 break;
454
455 /* Move forward to the next entry */
456 while (*p) {
457 if (*p++ == ',')
458 break;
459 }
460 }
461 if (!*p) /* No match */
462 return;
463
464 /* Collect the flags */
465 while (*++p && *p != ',') {
466 switch (TOLOWER(*p)) {
467 case 'a':
468 f |= US_FL_SANE_SENSE;
469 break;
470 case 'b':
471 f |= US_FL_BAD_SENSE;
472 break;
473 case 'c':
474 f |= US_FL_FIX_CAPACITY;
475 break;
476 case 'd':
477 f |= US_FL_NO_READ_DISC_INFO;
478 break;
479 case 'e':
480 f |= US_FL_NO_READ_CAPACITY_16;
481 break;
482 case 'h':
483 f |= US_FL_CAPACITY_HEURISTICS;
484 break;
485 case 'i':
486 f |= US_FL_IGNORE_DEVICE;
487 break;
488 case 'l':
489 f |= US_FL_NOT_LOCKABLE;
490 break;
491 case 'm':
492 f |= US_FL_MAX_SECTORS_64;
493 break;
494 case 'n':
495 f |= US_FL_INITIAL_READ10;
496 break;
497 case 'o':
498 f |= US_FL_CAPACITY_OK;
499 break;
500 case 'r':
501 f |= US_FL_IGNORE_RESIDUE;
502 break;
503 case 's':
504 f |= US_FL_SINGLE_LUN;
505 break;
506 case 'w':
507 f |= US_FL_NO_WP_DETECT;
508 break;
509 /* Ignore unrecognized flag characters */
510 }
511 }
512 us->fflags = (us->fflags & ~mask) | f;
513}
514
515/* Get the unusual_devs entries and the string descriptors */
516static int get_device_info(struct us_data *us, const struct usb_device_id *id,
517 struct us_unusual_dev *unusual_dev)
518{
519 struct usb_device *dev = us->pusb_dev;
520 struct usb_interface_descriptor *idesc =
521 &us->pusb_intf->cur_altsetting->desc;
522 struct device *pdev = &us->pusb_intf->dev;
523
524 /* Store the entries */
525 us->unusual_dev = unusual_dev;
526 us->subclass = (unusual_dev->useProtocol == USB_SC_DEVICE) ?
527 idesc->bInterfaceSubClass :
528 unusual_dev->useProtocol;
529 us->protocol = (unusual_dev->useTransport == USB_PR_DEVICE) ?
530 idesc->bInterfaceProtocol :
531 unusual_dev->useTransport;
532 us->fflags = USB_US_ORIG_FLAGS(id->driver_info);
533 adjust_quirks(us);
534
535 if (us->fflags & US_FL_IGNORE_DEVICE) {
536 dev_info(pdev, "device ignored\n");
537 return -ENODEV;
538 }
539
540 /*
541 * This flag is only needed when we're in high-speed, so let's
542 * disable it if we're in full-speed
543 */
544 if (dev->speed != USB_SPEED_HIGH)
545 us->fflags &= ~US_FL_GO_SLOW;
546
547 if (us->fflags)
548 dev_info(pdev, "Quirks match for vid %04x pid %04x: %lx\n",
549 le16_to_cpu(dev->descriptor.idVendor),
550 le16_to_cpu(dev->descriptor.idProduct),
551 us->fflags);
552
553 /* Log a message if a non-generic unusual_dev entry contains an
554 * unnecessary subclass or protocol override. This may stimulate
555 * reports from users that will help us remove unneeded entries
556 * from the unusual_devs.h table.
557 */
558 if (id->idVendor || id->idProduct) {
559 static const char *msgs[3] = {
560 "an unneeded SubClass entry",
561 "an unneeded Protocol entry",
562 "unneeded SubClass and Protocol entries"};
563 struct usb_device_descriptor *ddesc = &dev->descriptor;
564 int msg = -1;
565
566 if (unusual_dev->useProtocol != USB_SC_DEVICE &&
567 us->subclass == idesc->bInterfaceSubClass)
568 msg += 1;
569 if (unusual_dev->useTransport != USB_PR_DEVICE &&
570 us->protocol == idesc->bInterfaceProtocol)
571 msg += 2;
572 if (msg >= 0 && !(us->fflags & US_FL_NEED_OVERRIDE))
573 dev_notice(pdev, "This device "
574 "(%04x,%04x,%04x S %02x P %02x)"
575 " has %s in unusual_devs.h (kernel"
576 " %s)\n"
577 " Please send a copy of this message to "
578 "<linux-usb@vger.kernel.org> and "
579 "<usb-storage@lists.one-eyed-alien.net>\n",
580 le16_to_cpu(ddesc->idVendor),
581 le16_to_cpu(ddesc->idProduct),
582 le16_to_cpu(ddesc->bcdDevice),
583 idesc->bInterfaceSubClass,
584 idesc->bInterfaceProtocol,
585 msgs[msg],
586 utsname()->release);
587 }
588
589 return 0;
590}
591
592/* Get the transport settings */
593static void get_transport(struct us_data *us)
594{
595 switch (us->protocol) {
596 case USB_PR_CB:
597 us->transport_name = "Control/Bulk";
598 us->transport = usb_stor_CB_transport;
599 us->transport_reset = usb_stor_CB_reset;
600 us->max_lun = 7;
601 break;
602
603 case USB_PR_CBI:
604 us->transport_name = "Control/Bulk/Interrupt";
605 us->transport = usb_stor_CB_transport;
606 us->transport_reset = usb_stor_CB_reset;
607 us->max_lun = 7;
608 break;
609
610 case USB_PR_BULK:
611 us->transport_name = "Bulk";
612 us->transport = usb_stor_Bulk_transport;
613 us->transport_reset = usb_stor_Bulk_reset;
614 break;
615 }
616}
617
618/* Get the protocol settings */
619static void get_protocol(struct us_data *us)
620{
621 switch (us->subclass) {
622 case USB_SC_RBC:
623 us->protocol_name = "Reduced Block Commands (RBC)";
624 us->proto_handler = usb_stor_transparent_scsi_command;
625 break;
626
627 case USB_SC_8020:
628 us->protocol_name = "8020i";
629 us->proto_handler = usb_stor_pad12_command;
630 us->max_lun = 0;
631 break;
632
633 case USB_SC_QIC:
634 us->protocol_name = "QIC-157";
635 us->proto_handler = usb_stor_pad12_command;
636 us->max_lun = 0;
637 break;
638
639 case USB_SC_8070:
640 us->protocol_name = "8070i";
641 us->proto_handler = usb_stor_pad12_command;
642 us->max_lun = 0;
643 break;
644
645 case USB_SC_SCSI:
646 us->protocol_name = "Transparent SCSI";
647 us->proto_handler = usb_stor_transparent_scsi_command;
648 break;
649
650 case USB_SC_UFI:
651 us->protocol_name = "Uniform Floppy Interface (UFI)";
652 us->proto_handler = usb_stor_ufi_command;
653 break;
654 }
655}
656
657/* Get the pipe settings */
658static int get_pipes(struct us_data *us)
659{
660 struct usb_host_interface *altsetting =
661 us->pusb_intf->cur_altsetting;
662 int i;
663 struct usb_endpoint_descriptor *ep;
664 struct usb_endpoint_descriptor *ep_in = NULL;
665 struct usb_endpoint_descriptor *ep_out = NULL;
666 struct usb_endpoint_descriptor *ep_int = NULL;
667
668 /*
669 * Find the first endpoint of each type we need.
670 * We are expecting a minimum of 2 endpoints - in and out (bulk).
671 * An optional interrupt-in is OK (necessary for CBI protocol).
672 * We will ignore any others.
673 */
674 for (i = 0; i < altsetting->desc.bNumEndpoints; i++) {
675 ep = &altsetting->endpoint[i].desc;
676
677 if (usb_endpoint_xfer_bulk(ep)) {
678 if (usb_endpoint_dir_in(ep)) {
679 if (!ep_in)
680 ep_in = ep;
681 } else {
682 if (!ep_out)
683 ep_out = ep;
684 }
685 }
686
687 else if (usb_endpoint_is_int_in(ep)) {
688 if (!ep_int)
689 ep_int = ep;
690 }
691 }
692
693 if (!ep_in || !ep_out || (us->protocol == USB_PR_CBI && !ep_int)) {
694 US_DEBUGP("Endpoint sanity check failed! Rejecting dev.\n");
695 return -EIO;
696 }
697
698 /* Calculate and store the pipe values */
699 us->send_ctrl_pipe = usb_sndctrlpipe(us->pusb_dev, 0);
700 us->recv_ctrl_pipe = usb_rcvctrlpipe(us->pusb_dev, 0);
701 us->send_bulk_pipe = usb_sndbulkpipe(us->pusb_dev,
702 usb_endpoint_num(ep_out));
703 us->recv_bulk_pipe = usb_rcvbulkpipe(us->pusb_dev,
704 usb_endpoint_num(ep_in));
705 if (ep_int) {
706 us->recv_intr_pipe = usb_rcvintpipe(us->pusb_dev,
707 usb_endpoint_num(ep_int));
708 us->ep_bInterval = ep_int->bInterval;
709 }
710 return 0;
711}
712
713/* Initialize all the dynamic resources we need */
714static int usb_stor_acquire_resources(struct us_data *us)
715{
716 int p;
717 struct task_struct *th;
718
719 us->current_urb = usb_alloc_urb(0, GFP_KERNEL);
720 if (!us->current_urb) {
721 US_DEBUGP("URB allocation failed\n");
722 return -ENOMEM;
723 }
724
725 /* Just before we start our control thread, initialize
726 * the device if it needs initialization */
727 if (us->unusual_dev->initFunction) {
728 p = us->unusual_dev->initFunction(us);
729 if (p)
730 return p;
731 }
732
733 /* Start up our control thread */
734 th = kthread_run(usb_stor_control_thread, us, "usb-storage");
735 if (IS_ERR(th)) {
736 dev_warn(&us->pusb_intf->dev,
737 "Unable to start control thread\n");
738 return PTR_ERR(th);
739 }
740 us->ctl_thread = th;
741
742 return 0;
743}
744
745/* Release all our dynamic resources */
746static void usb_stor_release_resources(struct us_data *us)
747{
748 US_DEBUGP("-- %s\n", __func__);
749
750 /* Tell the control thread to exit. The SCSI host must
751 * already have been removed and the DISCONNECTING flag set
752 * so that we won't accept any more commands.
753 */
754 US_DEBUGP("-- sending exit command to thread\n");
755 complete(&us->cmnd_ready);
756 if (us->ctl_thread)
757 kthread_stop(us->ctl_thread);
758
759 /* Call the destructor routine, if it exists */
760 if (us->extra_destructor) {
761 US_DEBUGP("-- calling extra_destructor()\n");
762 us->extra_destructor(us->extra);
763 }
764
765 /* Free the extra data and the URB */
766 kfree(us->extra);
767 usb_free_urb(us->current_urb);
768}
769
770/* Dissociate from the USB device */
771static void dissociate_dev(struct us_data *us)
772{
773 US_DEBUGP("-- %s\n", __func__);
774
775 /* Free the buffers */
776 kfree(us->cr);
777 usb_free_coherent(us->pusb_dev, US_IOBUF_SIZE, us->iobuf, us->iobuf_dma);
778
779 /* Remove our private data from the interface */
780 usb_set_intfdata(us->pusb_intf, NULL);
781}
782
783/* First stage of disconnect processing: stop SCSI scanning,
784 * remove the host, and stop accepting new commands
785 */
786static void quiesce_and_remove_host(struct us_data *us)
787{
788 struct Scsi_Host *host = us_to_host(us);
789
790 /* If the device is really gone, cut short reset delays */
791 if (us->pusb_dev->state == USB_STATE_NOTATTACHED)
792 set_bit(US_FLIDX_DISCONNECTING, &us->dflags);
793
794 /* Prevent SCSI-scanning (if it hasn't started yet)
795 * and wait for the SCSI-scanning thread to stop.
796 */
797 set_bit(US_FLIDX_DONT_SCAN, &us->dflags);
798 wake_up(&us->delay_wait);
799 wait_for_completion(&us->scanning_done);
800
801 /* Removing the host will perform an orderly shutdown: caches
802 * synchronized, disks spun down, etc.
803 */
804 scsi_remove_host(host);
805
806 /* Prevent any new commands from being accepted and cut short
807 * reset delays.
808 */
809 scsi_lock(host);
810 set_bit(US_FLIDX_DISCONNECTING, &us->dflags);
811 scsi_unlock(host);
812 wake_up(&us->delay_wait);
813}
814
815/* Second stage of disconnect processing: deallocate all resources */
816static void release_everything(struct us_data *us)
817{
818 usb_stor_release_resources(us);
819 dissociate_dev(us);
820
821 /* Drop our reference to the host; the SCSI core will free it
822 * (and "us" along with it) when the refcount becomes 0. */
823 scsi_host_put(us_to_host(us));
824}
825
826/* Thread to carry out delayed SCSI-device scanning */
827static int usb_stor_scan_thread(void * __us)
828{
829 struct us_data *us = (struct us_data *)__us;
830 struct device *dev = &us->pusb_intf->dev;
831
832 dev_dbg(dev, "device found\n");
833
834 set_freezable();
835 /* Wait for the timeout to expire or for a disconnect */
836 if (delay_use > 0) {
837 dev_dbg(dev, "waiting for device to settle "
838 "before scanning\n");
839 wait_event_freezable_timeout(us->delay_wait,
840 test_bit(US_FLIDX_DONT_SCAN, &us->dflags),
841 delay_use * HZ);
842 }
843
844 /* If the device is still connected, perform the scanning */
845 if (!test_bit(US_FLIDX_DONT_SCAN, &us->dflags)) {
846
847 /* For bulk-only devices, determine the max LUN value */
848 if (us->protocol == USB_PR_BULK &&
849 !(us->fflags & US_FL_SINGLE_LUN)) {
850 mutex_lock(&us->dev_mutex);
851 us->max_lun = usb_stor_Bulk_max_lun(us);
852 mutex_unlock(&us->dev_mutex);
853 }
854 scsi_scan_host(us_to_host(us));
855 dev_dbg(dev, "scan complete\n");
856
857 /* Should we unbind if no devices were detected? */
858 }
859
860 usb_autopm_put_interface(us->pusb_intf);
861 complete_and_exit(&us->scanning_done, 0);
862}
863
864static unsigned int usb_stor_sg_tablesize(struct usb_interface *intf)
865{
866 struct usb_device *usb_dev = interface_to_usbdev(intf);
867
868 if (usb_dev->bus->sg_tablesize) {
869 return usb_dev->bus->sg_tablesize;
870 }
871 return SG_ALL;
872}
873
874/* First part of general USB mass-storage probing */
875int usb_stor_probe1(struct us_data **pus,
876 struct usb_interface *intf,
877 const struct usb_device_id *id,
878 struct us_unusual_dev *unusual_dev)
879{
880 struct Scsi_Host *host;
881 struct us_data *us;
882 int result;
883
884 US_DEBUGP("USB Mass Storage device detected\n");
885
886 /*
887 * Ask the SCSI layer to allocate a host structure, with extra
888 * space at the end for our private us_data structure.
889 */
890 host = scsi_host_alloc(&usb_stor_host_template, sizeof(*us));
891 if (!host) {
892 dev_warn(&intf->dev,
893 "Unable to allocate the scsi host\n");
894 return -ENOMEM;
895 }
896
897 /*
898 * Allow 16-byte CDBs and thus > 2TB
899 */
900 host->max_cmd_len = 16;
901 host->sg_tablesize = usb_stor_sg_tablesize(intf);
902 *pus = us = host_to_us(host);
903 memset(us, 0, sizeof(struct us_data));
904 mutex_init(&(us->dev_mutex));
905 init_completion(&us->cmnd_ready);
906 init_completion(&(us->notify));
907 init_waitqueue_head(&us->delay_wait);
908 init_completion(&us->scanning_done);
909
910 /* Associate the us_data structure with the USB device */
911 result = associate_dev(us, intf);
912 if (result)
913 goto BadDevice;
914
915 /* Get the unusual_devs entries and the descriptors */
916 result = get_device_info(us, id, unusual_dev);
917 if (result)
918 goto BadDevice;
919
920 /* Get standard transport and protocol settings */
921 get_transport(us);
922 get_protocol(us);
923
924 /* Give the caller a chance to fill in specialized transport
925 * or protocol settings.
926 */
927 return 0;
928
929BadDevice:
930 US_DEBUGP("storage_probe() failed\n");
931 release_everything(us);
932 return result;
933}
934EXPORT_SYMBOL_GPL(usb_stor_probe1);
935
936/* Second part of general USB mass-storage probing */
937int usb_stor_probe2(struct us_data *us)
938{
939 struct task_struct *th;
940 int result;
941 struct device *dev = &us->pusb_intf->dev;
942
943 /* Make sure the transport and protocol have both been set */
944 if (!us->transport || !us->proto_handler) {
945 result = -ENXIO;
946 goto BadDevice;
947 }
948 US_DEBUGP("Transport: %s\n", us->transport_name);
949 US_DEBUGP("Protocol: %s\n", us->protocol_name);
950
951 /* fix for single-lun devices */
952 if (us->fflags & US_FL_SINGLE_LUN)
953 us->max_lun = 0;
954
955 /* Find the endpoints and calculate pipe values */
956 result = get_pipes(us);
957 if (result)
958 goto BadDevice;
959
960 /*
961 * If the device returns invalid data for the first READ(10)
962 * command, indicate the command should be retried.
963 */
964 if (us->fflags & US_FL_INITIAL_READ10)
965 set_bit(US_FLIDX_REDO_READ10, &us->dflags);
966
967 /* Acquire all the other resources and add the host */
968 result = usb_stor_acquire_resources(us);
969 if (result)
970 goto BadDevice;
971 snprintf(us->scsi_name, sizeof(us->scsi_name), "usb-storage %s",
972 dev_name(&us->pusb_intf->dev));
973 result = scsi_add_host(us_to_host(us), dev);
974 if (result) {
975 dev_warn(dev,
976 "Unable to add the scsi host\n");
977 goto BadDevice;
978 }
979
980 /* Start up the thread for delayed SCSI-device scanning */
981 th = kthread_create(usb_stor_scan_thread, us, "usb-stor-scan");
982 if (IS_ERR(th)) {
983 dev_warn(dev,
984 "Unable to start the device-scanning thread\n");
985 complete(&us->scanning_done);
986 quiesce_and_remove_host(us);
987 result = PTR_ERR(th);
988 goto BadDevice;
989 }
990
991 usb_autopm_get_interface_no_resume(us->pusb_intf);
992 wake_up_process(th);
993
994 return 0;
995
996 /* We come here if there are any problems */
997BadDevice:
998 US_DEBUGP("storage_probe() failed\n");
999 release_everything(us);
1000 return result;
1001}
1002EXPORT_SYMBOL_GPL(usb_stor_probe2);
1003
1004/* Handle a USB mass-storage disconnect */
1005void usb_stor_disconnect(struct usb_interface *intf)
1006{
1007 struct us_data *us = usb_get_intfdata(intf);
1008
1009 US_DEBUGP("storage_disconnect() called\n");
1010 quiesce_and_remove_host(us);
1011 release_everything(us);
1012}
1013EXPORT_SYMBOL_GPL(usb_stor_disconnect);
1014
1015/* The main probe routine for standard devices */
1016static int storage_probe(struct usb_interface *intf,
1017 const struct usb_device_id *id)
1018{
1019 struct us_data *us;
1020 int result;
1021
1022 /*
1023 * If libusual is configured, let it decide whether a standard
1024 * device should be handled by usb-storage or by ub.
1025 * If the device isn't standard (is handled by a subdriver
1026 * module) then don't accept it.
1027 */
1028 if (usb_usual_check_type(id, USB_US_TYPE_STOR) ||
1029 usb_usual_ignore_device(intf))
1030 return -ENXIO;
1031
1032 /*
1033 * Call the general probe procedures.
1034 *
1035 * The unusual_dev_list array is parallel to the usb_storage_usb_ids
1036 * table, so we use the index of the id entry to find the
1037 * corresponding unusual_devs entry.
1038 */
1039 result = usb_stor_probe1(&us, intf, id,
1040 (id - usb_storage_usb_ids) + us_unusual_dev_list);
1041 if (result)
1042 return result;
1043
1044 /* No special transport or protocol settings in the main module */
1045
1046 result = usb_stor_probe2(us);
1047 return result;
1048}
1049
1050/***********************************************************************
1051 * Initialization and registration
1052 ***********************************************************************/
1053
1054static struct usb_driver usb_storage_driver = {
1055 .name = "usb-storage",
1056 .probe = storage_probe,
1057 .disconnect = usb_stor_disconnect,
1058 .suspend = usb_stor_suspend,
1059 .resume = usb_stor_resume,
1060 .reset_resume = usb_stor_reset_resume,
1061 .pre_reset = usb_stor_pre_reset,
1062 .post_reset = usb_stor_post_reset,
1063 .id_table = usb_storage_usb_ids,
1064 .supports_autosuspend = 1,
1065 .soft_unbind = 1,
1066};
1067
1068static int __init usb_stor_init(void)
1069{
1070 int retval;
1071
1072 pr_info("Initializing USB Mass Storage driver...\n");
1073
1074 /* register the driver, return usb_register return code if error */
1075 retval = usb_register(&usb_storage_driver);
1076 if (retval == 0) {
1077 pr_info("USB Mass Storage support registered.\n");
1078 usb_usual_set_present(USB_US_TYPE_STOR);
1079 }
1080 return retval;
1081}
1082
1083static void __exit usb_stor_exit(void)
1084{
1085 US_DEBUGP("usb_stor_exit() called\n");
1086
1087 /* Deregister the driver
1088 * This will cause disconnect() to be called for each
1089 * attached unit
1090 */
1091 US_DEBUGP("-- calling usb_deregister()\n");
1092 usb_deregister(&usb_storage_driver) ;
1093
1094 usb_usual_clear_present(USB_US_TYPE_STOR);
1095}
1096
1097module_init(usb_stor_init);
1098module_exit(usb_stor_exit);
1/*
2 * Driver for USB Mass Storage compliant devices
3 *
4 * Current development and maintenance by:
5 * (c) 1999-2003 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
6 *
7 * Developed with the assistance of:
8 * (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
9 * (c) 2003-2009 Alan Stern (stern@rowland.harvard.edu)
10 *
11 * Initial work by:
12 * (c) 1999 Michael Gee (michael@linuxspecific.com)
13 *
14 * usb_device_id support by Adam J. Richter (adam@yggdrasil.com):
15 * (c) 2000 Yggdrasil Computing, Inc.
16 *
17 * This driver is based on the 'USB Mass Storage Class' document. This
18 * describes in detail the protocol used to communicate with such
19 * devices. Clearly, the designers had SCSI and ATAPI commands in
20 * mind when they created this document. The commands are all very
21 * similar to commands in the SCSI-II and ATAPI specifications.
22 *
23 * It is important to note that in a number of cases this class
24 * exhibits class-specific exemptions from the USB specification.
25 * Notably the usage of NAK, STALL and ACK differs from the norm, in
26 * that they are used to communicate wait, failed and OK on commands.
27 *
28 * Also, for certain devices, the interrupt endpoint is used to convey
29 * status of a command.
30 *
31 * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
32 * information about this driver.
33 *
34 * This program is free software; you can redistribute it and/or modify it
35 * under the terms of the GNU General Public License as published by the
36 * Free Software Foundation; either version 2, or (at your option) any
37 * later version.
38 *
39 * This program is distributed in the hope that it will be useful, but
40 * WITHOUT ANY WARRANTY; without even the implied warranty of
41 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
42 * General Public License for more details.
43 *
44 * You should have received a copy of the GNU General Public License along
45 * with this program; if not, write to the Free Software Foundation, Inc.,
46 * 675 Mass Ave, Cambridge, MA 02139, USA.
47 */
48
49#ifdef CONFIG_USB_STORAGE_DEBUG
50#define DEBUG
51#endif
52
53#include <linux/sched.h>
54#include <linux/errno.h>
55#include <linux/module.h>
56#include <linux/slab.h>
57#include <linux/kthread.h>
58#include <linux/mutex.h>
59#include <linux/utsname.h>
60
61#include <scsi/scsi.h>
62#include <scsi/scsi_cmnd.h>
63#include <scsi/scsi_device.h>
64
65#include "usb.h"
66#include "scsiglue.h"
67#include "transport.h"
68#include "protocol.h"
69#include "debug.h"
70#include "initializers.h"
71
72#include "sierra_ms.h"
73#include "option_ms.h"
74
75#if IS_ENABLED(CONFIG_USB_UAS)
76#include "uas-detect.h"
77#endif
78
79#define DRV_NAME "usb-storage"
80
81/* Some informational data */
82MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>");
83MODULE_DESCRIPTION("USB Mass Storage driver for Linux");
84MODULE_LICENSE("GPL");
85
86static unsigned int delay_use = 1;
87module_param(delay_use, uint, S_IRUGO | S_IWUSR);
88MODULE_PARM_DESC(delay_use, "seconds to delay before using a new device");
89
90static char quirks[128];
91module_param_string(quirks, quirks, sizeof(quirks), S_IRUGO | S_IWUSR);
92MODULE_PARM_DESC(quirks, "supplemental list of device IDs and their quirks");
93
94
95/*
96 * The entries in this table correspond, line for line,
97 * with the entries in usb_storage_usb_ids[], defined in usual-tables.c.
98 */
99
100/*
101 *The vendor name should be kept at eight characters or less, and
102 * the product name should be kept at 16 characters or less. If a device
103 * has the US_FL_FIX_INQUIRY flag, then the vendor and product names
104 * normally generated by a device through the INQUIRY response will be
105 * taken from this list, and this is the reason for the above size
106 * restriction. However, if the flag is not present, then you
107 * are free to use as many characters as you like.
108 */
109
110#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
111 vendor_name, product_name, use_protocol, use_transport, \
112 init_function, Flags) \
113{ \
114 .vendorName = vendor_name, \
115 .productName = product_name, \
116 .useProtocol = use_protocol, \
117 .useTransport = use_transport, \
118 .initFunction = init_function, \
119}
120
121#define COMPLIANT_DEV UNUSUAL_DEV
122
123#define USUAL_DEV(use_protocol, use_transport) \
124{ \
125 .useProtocol = use_protocol, \
126 .useTransport = use_transport, \
127}
128
129#define UNUSUAL_VENDOR_INTF(idVendor, cl, sc, pr, \
130 vendor_name, product_name, use_protocol, use_transport, \
131 init_function, Flags) \
132{ \
133 .vendorName = vendor_name, \
134 .productName = product_name, \
135 .useProtocol = use_protocol, \
136 .useTransport = use_transport, \
137 .initFunction = init_function, \
138}
139
140static struct us_unusual_dev us_unusual_dev_list[] = {
141# include "unusual_devs.h"
142 { } /* Terminating entry */
143};
144
145static struct us_unusual_dev for_dynamic_ids =
146 USUAL_DEV(USB_SC_SCSI, USB_PR_BULK);
147
148#undef UNUSUAL_DEV
149#undef COMPLIANT_DEV
150#undef USUAL_DEV
151#undef UNUSUAL_VENDOR_INTF
152
153#ifdef CONFIG_LOCKDEP
154
155static struct lock_class_key us_interface_key[USB_MAXINTERFACES];
156
157static void us_set_lock_class(struct mutex *mutex,
158 struct usb_interface *intf)
159{
160 struct usb_device *udev = interface_to_usbdev(intf);
161 struct usb_host_config *config = udev->actconfig;
162 int i;
163
164 for (i = 0; i < config->desc.bNumInterfaces; i++) {
165 if (config->interface[i] == intf)
166 break;
167 }
168
169 BUG_ON(i == config->desc.bNumInterfaces);
170
171 lockdep_set_class(mutex, &us_interface_key[i]);
172}
173
174#else
175
176static void us_set_lock_class(struct mutex *mutex,
177 struct usb_interface *intf)
178{
179}
180
181#endif
182
183#ifdef CONFIG_PM /* Minimal support for suspend and resume */
184
185int usb_stor_suspend(struct usb_interface *iface, pm_message_t message)
186{
187 struct us_data *us = usb_get_intfdata(iface);
188
189 /* Wait until no command is running */
190 mutex_lock(&us->dev_mutex);
191
192 if (us->suspend_resume_hook)
193 (us->suspend_resume_hook)(us, US_SUSPEND);
194
195 /*
196 * When runtime PM is working, we'll set a flag to indicate
197 * whether we should autoresume when a SCSI request arrives.
198 */
199
200 mutex_unlock(&us->dev_mutex);
201 return 0;
202}
203EXPORT_SYMBOL_GPL(usb_stor_suspend);
204
205int usb_stor_resume(struct usb_interface *iface)
206{
207 struct us_data *us = usb_get_intfdata(iface);
208
209 mutex_lock(&us->dev_mutex);
210
211 if (us->suspend_resume_hook)
212 (us->suspend_resume_hook)(us, US_RESUME);
213
214 mutex_unlock(&us->dev_mutex);
215 return 0;
216}
217EXPORT_SYMBOL_GPL(usb_stor_resume);
218
219int usb_stor_reset_resume(struct usb_interface *iface)
220{
221 struct us_data *us = usb_get_intfdata(iface);
222
223 /* Report the reset to the SCSI core */
224 usb_stor_report_bus_reset(us);
225
226 /*
227 * FIXME: Notify the subdrivers that they need to reinitialize
228 * the device
229 */
230 return 0;
231}
232EXPORT_SYMBOL_GPL(usb_stor_reset_resume);
233
234#endif /* CONFIG_PM */
235
236/*
237 * The next two routines get called just before and just after
238 * a USB port reset, whether from this driver or a different one.
239 */
240
241int usb_stor_pre_reset(struct usb_interface *iface)
242{
243 struct us_data *us = usb_get_intfdata(iface);
244
245 /* Make sure no command runs during the reset */
246 mutex_lock(&us->dev_mutex);
247 return 0;
248}
249EXPORT_SYMBOL_GPL(usb_stor_pre_reset);
250
251int usb_stor_post_reset(struct usb_interface *iface)
252{
253 struct us_data *us = usb_get_intfdata(iface);
254
255 /* Report the reset to the SCSI core */
256 usb_stor_report_bus_reset(us);
257
258 /*
259 * FIXME: Notify the subdrivers that they need to reinitialize
260 * the device
261 */
262
263 mutex_unlock(&us->dev_mutex);
264 return 0;
265}
266EXPORT_SYMBOL_GPL(usb_stor_post_reset);
267
268/*
269 * fill_inquiry_response takes an unsigned char array (which must
270 * be at least 36 characters) and populates the vendor name,
271 * product name, and revision fields. Then the array is copied
272 * into the SCSI command's response buffer (oddly enough
273 * called request_buffer). data_len contains the length of the
274 * data array, which again must be at least 36.
275 */
276
277void fill_inquiry_response(struct us_data *us, unsigned char *data,
278 unsigned int data_len)
279{
280 if (data_len < 36) /* You lose. */
281 return;
282
283 memset(data+8, ' ', 28);
284 if (data[0]&0x20) { /*
285 * USB device currently not connected. Return
286 * peripheral qualifier 001b ("...however, the
287 * physical device is not currently connected
288 * to this logical unit") and leave vendor and
289 * product identification empty. ("If the target
290 * does store some of the INQUIRY data on the
291 * device, it may return zeros or ASCII spaces
292 * (20h) in those fields until the data is
293 * available from the device.").
294 */
295 } else {
296 u16 bcdDevice = le16_to_cpu(us->pusb_dev->descriptor.bcdDevice);
297 int n;
298
299 n = strlen(us->unusual_dev->vendorName);
300 memcpy(data+8, us->unusual_dev->vendorName, min(8, n));
301 n = strlen(us->unusual_dev->productName);
302 memcpy(data+16, us->unusual_dev->productName, min(16, n));
303
304 data[32] = 0x30 + ((bcdDevice>>12) & 0x0F);
305 data[33] = 0x30 + ((bcdDevice>>8) & 0x0F);
306 data[34] = 0x30 + ((bcdDevice>>4) & 0x0F);
307 data[35] = 0x30 + ((bcdDevice) & 0x0F);
308 }
309
310 usb_stor_set_xfer_buf(data, data_len, us->srb);
311}
312EXPORT_SYMBOL_GPL(fill_inquiry_response);
313
314static int usb_stor_control_thread(void * __us)
315{
316 struct us_data *us = (struct us_data *)__us;
317 struct Scsi_Host *host = us_to_host(us);
318
319 for (;;) {
320 usb_stor_dbg(us, "*** thread sleeping\n");
321 if (wait_for_completion_interruptible(&us->cmnd_ready))
322 break;
323
324 usb_stor_dbg(us, "*** thread awakened\n");
325
326 /* lock the device pointers */
327 mutex_lock(&(us->dev_mutex));
328
329 /* lock access to the state */
330 scsi_lock(host);
331
332 /* When we are called with no command pending, we're done */
333 if (us->srb == NULL) {
334 scsi_unlock(host);
335 mutex_unlock(&us->dev_mutex);
336 usb_stor_dbg(us, "-- exiting\n");
337 break;
338 }
339
340 /* has the command timed out *already* ? */
341 if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
342 us->srb->result = DID_ABORT << 16;
343 goto SkipForAbort;
344 }
345
346 scsi_unlock(host);
347
348 /*
349 * reject the command if the direction indicator
350 * is UNKNOWN
351 */
352 if (us->srb->sc_data_direction == DMA_BIDIRECTIONAL) {
353 usb_stor_dbg(us, "UNKNOWN data direction\n");
354 us->srb->result = DID_ERROR << 16;
355 }
356
357 /*
358 * reject if target != 0 or if LUN is higher than
359 * the maximum known LUN
360 */
361 else if (us->srb->device->id &&
362 !(us->fflags & US_FL_SCM_MULT_TARG)) {
363 usb_stor_dbg(us, "Bad target number (%d:%llu)\n",
364 us->srb->device->id,
365 us->srb->device->lun);
366 us->srb->result = DID_BAD_TARGET << 16;
367 }
368
369 else if (us->srb->device->lun > us->max_lun) {
370 usb_stor_dbg(us, "Bad LUN (%d:%llu)\n",
371 us->srb->device->id,
372 us->srb->device->lun);
373 us->srb->result = DID_BAD_TARGET << 16;
374 }
375
376 /*
377 * Handle those devices which need us to fake
378 * their inquiry data
379 */
380 else if ((us->srb->cmnd[0] == INQUIRY) &&
381 (us->fflags & US_FL_FIX_INQUIRY)) {
382 unsigned char data_ptr[36] = {
383 0x00, 0x80, 0x02, 0x02,
384 0x1F, 0x00, 0x00, 0x00};
385
386 usb_stor_dbg(us, "Faking INQUIRY command\n");
387 fill_inquiry_response(us, data_ptr, 36);
388 us->srb->result = SAM_STAT_GOOD;
389 }
390
391 /* we've got a command, let's do it! */
392 else {
393 US_DEBUG(usb_stor_show_command(us, us->srb));
394 us->proto_handler(us->srb, us);
395 usb_mark_last_busy(us->pusb_dev);
396 }
397
398 /* lock access to the state */
399 scsi_lock(host);
400
401 /* indicate that the command is done */
402 if (us->srb->result != DID_ABORT << 16) {
403 usb_stor_dbg(us, "scsi cmd done, result=0x%x\n",
404 us->srb->result);
405 us->srb->scsi_done(us->srb);
406 } else {
407SkipForAbort:
408 usb_stor_dbg(us, "scsi command aborted\n");
409 }
410
411 /*
412 * If an abort request was received we need to signal that
413 * the abort has finished. The proper test for this is
414 * the TIMED_OUT flag, not srb->result == DID_ABORT, because
415 * the timeout might have occurred after the command had
416 * already completed with a different result code.
417 */
418 if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
419 complete(&(us->notify));
420
421 /* Allow USB transfers to resume */
422 clear_bit(US_FLIDX_ABORTING, &us->dflags);
423 clear_bit(US_FLIDX_TIMED_OUT, &us->dflags);
424 }
425
426 /* finished working on this command */
427 us->srb = NULL;
428 scsi_unlock(host);
429
430 /* unlock the device pointers */
431 mutex_unlock(&us->dev_mutex);
432 } /* for (;;) */
433
434 /* Wait until we are told to stop */
435 for (;;) {
436 set_current_state(TASK_INTERRUPTIBLE);
437 if (kthread_should_stop())
438 break;
439 schedule();
440 }
441 __set_current_state(TASK_RUNNING);
442 return 0;
443}
444
445/***********************************************************************
446 * Device probing and disconnecting
447 ***********************************************************************/
448
449/* Associate our private data with the USB device */
450static int associate_dev(struct us_data *us, struct usb_interface *intf)
451{
452 /* Fill in the device-related fields */
453 us->pusb_dev = interface_to_usbdev(intf);
454 us->pusb_intf = intf;
455 us->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
456 usb_stor_dbg(us, "Vendor: 0x%04x, Product: 0x%04x, Revision: 0x%04x\n",
457 le16_to_cpu(us->pusb_dev->descriptor.idVendor),
458 le16_to_cpu(us->pusb_dev->descriptor.idProduct),
459 le16_to_cpu(us->pusb_dev->descriptor.bcdDevice));
460 usb_stor_dbg(us, "Interface Subclass: 0x%02x, Protocol: 0x%02x\n",
461 intf->cur_altsetting->desc.bInterfaceSubClass,
462 intf->cur_altsetting->desc.bInterfaceProtocol);
463
464 /* Store our private data in the interface */
465 usb_set_intfdata(intf, us);
466
467 /* Allocate the control/setup and DMA-mapped buffers */
468 us->cr = kmalloc(sizeof(*us->cr), GFP_KERNEL);
469 if (!us->cr)
470 return -ENOMEM;
471
472 us->iobuf = usb_alloc_coherent(us->pusb_dev, US_IOBUF_SIZE,
473 GFP_KERNEL, &us->iobuf_dma);
474 if (!us->iobuf) {
475 usb_stor_dbg(us, "I/O buffer allocation failed\n");
476 return -ENOMEM;
477 }
478 return 0;
479}
480
481/* Works only for digits and letters, but small and fast */
482#define TOLOWER(x) ((x) | 0x20)
483
484/* Adjust device flags based on the "quirks=" module parameter */
485void usb_stor_adjust_quirks(struct usb_device *udev, unsigned long *fflags)
486{
487 char *p;
488 u16 vid = le16_to_cpu(udev->descriptor.idVendor);
489 u16 pid = le16_to_cpu(udev->descriptor.idProduct);
490 unsigned f = 0;
491 unsigned int mask = (US_FL_SANE_SENSE | US_FL_BAD_SENSE |
492 US_FL_FIX_CAPACITY | US_FL_IGNORE_UAS |
493 US_FL_CAPACITY_HEURISTICS | US_FL_IGNORE_DEVICE |
494 US_FL_NOT_LOCKABLE | US_FL_MAX_SECTORS_64 |
495 US_FL_CAPACITY_OK | US_FL_IGNORE_RESIDUE |
496 US_FL_SINGLE_LUN | US_FL_NO_WP_DETECT |
497 US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16 |
498 US_FL_INITIAL_READ10 | US_FL_WRITE_CACHE |
499 US_FL_NO_ATA_1X | US_FL_NO_REPORT_OPCODES |
500 US_FL_MAX_SECTORS_240 | US_FL_NO_REPORT_LUNS |
501 US_FL_ALWAYS_SYNC);
502
503 p = quirks;
504 while (*p) {
505 /* Each entry consists of VID:PID:flags */
506 if (vid == simple_strtoul(p, &p, 16) &&
507 *p == ':' &&
508 pid == simple_strtoul(p+1, &p, 16) &&
509 *p == ':')
510 break;
511
512 /* Move forward to the next entry */
513 while (*p) {
514 if (*p++ == ',')
515 break;
516 }
517 }
518 if (!*p) /* No match */
519 return;
520
521 /* Collect the flags */
522 while (*++p && *p != ',') {
523 switch (TOLOWER(*p)) {
524 case 'a':
525 f |= US_FL_SANE_SENSE;
526 break;
527 case 'b':
528 f |= US_FL_BAD_SENSE;
529 break;
530 case 'c':
531 f |= US_FL_FIX_CAPACITY;
532 break;
533 case 'd':
534 f |= US_FL_NO_READ_DISC_INFO;
535 break;
536 case 'e':
537 f |= US_FL_NO_READ_CAPACITY_16;
538 break;
539 case 'f':
540 f |= US_FL_NO_REPORT_OPCODES;
541 break;
542 case 'g':
543 f |= US_FL_MAX_SECTORS_240;
544 break;
545 case 'h':
546 f |= US_FL_CAPACITY_HEURISTICS;
547 break;
548 case 'i':
549 f |= US_FL_IGNORE_DEVICE;
550 break;
551 case 'j':
552 f |= US_FL_NO_REPORT_LUNS;
553 break;
554 case 'l':
555 f |= US_FL_NOT_LOCKABLE;
556 break;
557 case 'm':
558 f |= US_FL_MAX_SECTORS_64;
559 break;
560 case 'n':
561 f |= US_FL_INITIAL_READ10;
562 break;
563 case 'o':
564 f |= US_FL_CAPACITY_OK;
565 break;
566 case 'p':
567 f |= US_FL_WRITE_CACHE;
568 break;
569 case 'r':
570 f |= US_FL_IGNORE_RESIDUE;
571 break;
572 case 's':
573 f |= US_FL_SINGLE_LUN;
574 break;
575 case 't':
576 f |= US_FL_NO_ATA_1X;
577 break;
578 case 'u':
579 f |= US_FL_IGNORE_UAS;
580 break;
581 case 'w':
582 f |= US_FL_NO_WP_DETECT;
583 break;
584 case 'y':
585 f |= US_FL_ALWAYS_SYNC;
586 break;
587 /* Ignore unrecognized flag characters */
588 }
589 }
590 *fflags = (*fflags & ~mask) | f;
591}
592EXPORT_SYMBOL_GPL(usb_stor_adjust_quirks);
593
594/* Get the unusual_devs entries and the string descriptors */
595static int get_device_info(struct us_data *us, const struct usb_device_id *id,
596 struct us_unusual_dev *unusual_dev)
597{
598 struct usb_device *dev = us->pusb_dev;
599 struct usb_interface_descriptor *idesc =
600 &us->pusb_intf->cur_altsetting->desc;
601 struct device *pdev = &us->pusb_intf->dev;
602
603 /* Store the entries */
604 us->unusual_dev = unusual_dev;
605 us->subclass = (unusual_dev->useProtocol == USB_SC_DEVICE) ?
606 idesc->bInterfaceSubClass :
607 unusual_dev->useProtocol;
608 us->protocol = (unusual_dev->useTransport == USB_PR_DEVICE) ?
609 idesc->bInterfaceProtocol :
610 unusual_dev->useTransport;
611 us->fflags = id->driver_info;
612 usb_stor_adjust_quirks(us->pusb_dev, &us->fflags);
613
614 if (us->fflags & US_FL_IGNORE_DEVICE) {
615 dev_info(pdev, "device ignored\n");
616 return -ENODEV;
617 }
618
619 /*
620 * This flag is only needed when we're in high-speed, so let's
621 * disable it if we're in full-speed
622 */
623 if (dev->speed != USB_SPEED_HIGH)
624 us->fflags &= ~US_FL_GO_SLOW;
625
626 if (us->fflags)
627 dev_info(pdev, "Quirks match for vid %04x pid %04x: %lx\n",
628 le16_to_cpu(dev->descriptor.idVendor),
629 le16_to_cpu(dev->descriptor.idProduct),
630 us->fflags);
631
632 /*
633 * Log a message if a non-generic unusual_dev entry contains an
634 * unnecessary subclass or protocol override. This may stimulate
635 * reports from users that will help us remove unneeded entries
636 * from the unusual_devs.h table.
637 */
638 if (id->idVendor || id->idProduct) {
639 static const char *msgs[3] = {
640 "an unneeded SubClass entry",
641 "an unneeded Protocol entry",
642 "unneeded SubClass and Protocol entries"};
643 struct usb_device_descriptor *ddesc = &dev->descriptor;
644 int msg = -1;
645
646 if (unusual_dev->useProtocol != USB_SC_DEVICE &&
647 us->subclass == idesc->bInterfaceSubClass)
648 msg += 1;
649 if (unusual_dev->useTransport != USB_PR_DEVICE &&
650 us->protocol == idesc->bInterfaceProtocol)
651 msg += 2;
652 if (msg >= 0 && !(us->fflags & US_FL_NEED_OVERRIDE))
653 dev_notice(pdev, "This device "
654 "(%04x,%04x,%04x S %02x P %02x)"
655 " has %s in unusual_devs.h (kernel"
656 " %s)\n"
657 " Please send a copy of this message to "
658 "<linux-usb@vger.kernel.org> and "
659 "<usb-storage@lists.one-eyed-alien.net>\n",
660 le16_to_cpu(ddesc->idVendor),
661 le16_to_cpu(ddesc->idProduct),
662 le16_to_cpu(ddesc->bcdDevice),
663 idesc->bInterfaceSubClass,
664 idesc->bInterfaceProtocol,
665 msgs[msg],
666 utsname()->release);
667 }
668
669 return 0;
670}
671
672/* Get the transport settings */
673static void get_transport(struct us_data *us)
674{
675 switch (us->protocol) {
676 case USB_PR_CB:
677 us->transport_name = "Control/Bulk";
678 us->transport = usb_stor_CB_transport;
679 us->transport_reset = usb_stor_CB_reset;
680 us->max_lun = 7;
681 break;
682
683 case USB_PR_CBI:
684 us->transport_name = "Control/Bulk/Interrupt";
685 us->transport = usb_stor_CB_transport;
686 us->transport_reset = usb_stor_CB_reset;
687 us->max_lun = 7;
688 break;
689
690 case USB_PR_BULK:
691 us->transport_name = "Bulk";
692 us->transport = usb_stor_Bulk_transport;
693 us->transport_reset = usb_stor_Bulk_reset;
694 break;
695 }
696}
697
698/* Get the protocol settings */
699static void get_protocol(struct us_data *us)
700{
701 switch (us->subclass) {
702 case USB_SC_RBC:
703 us->protocol_name = "Reduced Block Commands (RBC)";
704 us->proto_handler = usb_stor_transparent_scsi_command;
705 break;
706
707 case USB_SC_8020:
708 us->protocol_name = "8020i";
709 us->proto_handler = usb_stor_pad12_command;
710 us->max_lun = 0;
711 break;
712
713 case USB_SC_QIC:
714 us->protocol_name = "QIC-157";
715 us->proto_handler = usb_stor_pad12_command;
716 us->max_lun = 0;
717 break;
718
719 case USB_SC_8070:
720 us->protocol_name = "8070i";
721 us->proto_handler = usb_stor_pad12_command;
722 us->max_lun = 0;
723 break;
724
725 case USB_SC_SCSI:
726 us->protocol_name = "Transparent SCSI";
727 us->proto_handler = usb_stor_transparent_scsi_command;
728 break;
729
730 case USB_SC_UFI:
731 us->protocol_name = "Uniform Floppy Interface (UFI)";
732 us->proto_handler = usb_stor_ufi_command;
733 break;
734 }
735}
736
737/* Get the pipe settings */
738static int get_pipes(struct us_data *us)
739{
740 struct usb_host_interface *altsetting =
741 us->pusb_intf->cur_altsetting;
742 int i;
743 struct usb_endpoint_descriptor *ep;
744 struct usb_endpoint_descriptor *ep_in = NULL;
745 struct usb_endpoint_descriptor *ep_out = NULL;
746 struct usb_endpoint_descriptor *ep_int = NULL;
747
748 /*
749 * Find the first endpoint of each type we need.
750 * We are expecting a minimum of 2 endpoints - in and out (bulk).
751 * An optional interrupt-in is OK (necessary for CBI protocol).
752 * We will ignore any others.
753 */
754 for (i = 0; i < altsetting->desc.bNumEndpoints; i++) {
755 ep = &altsetting->endpoint[i].desc;
756
757 if (usb_endpoint_xfer_bulk(ep)) {
758 if (usb_endpoint_dir_in(ep)) {
759 if (!ep_in)
760 ep_in = ep;
761 } else {
762 if (!ep_out)
763 ep_out = ep;
764 }
765 }
766
767 else if (usb_endpoint_is_int_in(ep)) {
768 if (!ep_int)
769 ep_int = ep;
770 }
771 }
772
773 if (!ep_in || !ep_out || (us->protocol == USB_PR_CBI && !ep_int)) {
774 usb_stor_dbg(us, "Endpoint sanity check failed! Rejecting dev.\n");
775 return -EIO;
776 }
777
778 /* Calculate and store the pipe values */
779 us->send_ctrl_pipe = usb_sndctrlpipe(us->pusb_dev, 0);
780 us->recv_ctrl_pipe = usb_rcvctrlpipe(us->pusb_dev, 0);
781 us->send_bulk_pipe = usb_sndbulkpipe(us->pusb_dev,
782 usb_endpoint_num(ep_out));
783 us->recv_bulk_pipe = usb_rcvbulkpipe(us->pusb_dev,
784 usb_endpoint_num(ep_in));
785 if (ep_int) {
786 us->recv_intr_pipe = usb_rcvintpipe(us->pusb_dev,
787 usb_endpoint_num(ep_int));
788 us->ep_bInterval = ep_int->bInterval;
789 }
790 return 0;
791}
792
793/* Initialize all the dynamic resources we need */
794static int usb_stor_acquire_resources(struct us_data *us)
795{
796 int p;
797 struct task_struct *th;
798
799 us->current_urb = usb_alloc_urb(0, GFP_KERNEL);
800 if (!us->current_urb)
801 return -ENOMEM;
802
803 /*
804 * Just before we start our control thread, initialize
805 * the device if it needs initialization
806 */
807 if (us->unusual_dev->initFunction) {
808 p = us->unusual_dev->initFunction(us);
809 if (p)
810 return p;
811 }
812
813 /* Start up our control thread */
814 th = kthread_run(usb_stor_control_thread, us, "usb-storage");
815 if (IS_ERR(th)) {
816 dev_warn(&us->pusb_intf->dev,
817 "Unable to start control thread\n");
818 return PTR_ERR(th);
819 }
820 us->ctl_thread = th;
821
822 return 0;
823}
824
825/* Release all our dynamic resources */
826static void usb_stor_release_resources(struct us_data *us)
827{
828 /*
829 * Tell the control thread to exit. The SCSI host must
830 * already have been removed and the DISCONNECTING flag set
831 * so that we won't accept any more commands.
832 */
833 usb_stor_dbg(us, "-- sending exit command to thread\n");
834 complete(&us->cmnd_ready);
835 if (us->ctl_thread)
836 kthread_stop(us->ctl_thread);
837
838 /* Call the destructor routine, if it exists */
839 if (us->extra_destructor) {
840 usb_stor_dbg(us, "-- calling extra_destructor()\n");
841 us->extra_destructor(us->extra);
842 }
843
844 /* Free the extra data and the URB */
845 kfree(us->extra);
846 usb_free_urb(us->current_urb);
847}
848
849/* Dissociate from the USB device */
850static void dissociate_dev(struct us_data *us)
851{
852 /* Free the buffers */
853 kfree(us->cr);
854 usb_free_coherent(us->pusb_dev, US_IOBUF_SIZE, us->iobuf, us->iobuf_dma);
855
856 /* Remove our private data from the interface */
857 usb_set_intfdata(us->pusb_intf, NULL);
858}
859
860/*
861 * First stage of disconnect processing: stop SCSI scanning,
862 * remove the host, and stop accepting new commands
863 */
864static void quiesce_and_remove_host(struct us_data *us)
865{
866 struct Scsi_Host *host = us_to_host(us);
867
868 /* If the device is really gone, cut short reset delays */
869 if (us->pusb_dev->state == USB_STATE_NOTATTACHED) {
870 set_bit(US_FLIDX_DISCONNECTING, &us->dflags);
871 wake_up(&us->delay_wait);
872 }
873
874 /*
875 * Prevent SCSI scanning (if it hasn't started yet)
876 * or wait for the SCSI-scanning routine to stop.
877 */
878 cancel_delayed_work_sync(&us->scan_dwork);
879
880 /* Balance autopm calls if scanning was cancelled */
881 if (test_bit(US_FLIDX_SCAN_PENDING, &us->dflags))
882 usb_autopm_put_interface_no_suspend(us->pusb_intf);
883
884 /*
885 * Removing the host will perform an orderly shutdown: caches
886 * synchronized, disks spun down, etc.
887 */
888 scsi_remove_host(host);
889
890 /*
891 * Prevent any new commands from being accepted and cut short
892 * reset delays.
893 */
894 scsi_lock(host);
895 set_bit(US_FLIDX_DISCONNECTING, &us->dflags);
896 scsi_unlock(host);
897 wake_up(&us->delay_wait);
898}
899
900/* Second stage of disconnect processing: deallocate all resources */
901static void release_everything(struct us_data *us)
902{
903 usb_stor_release_resources(us);
904 dissociate_dev(us);
905
906 /*
907 * Drop our reference to the host; the SCSI core will free it
908 * (and "us" along with it) when the refcount becomes 0.
909 */
910 scsi_host_put(us_to_host(us));
911}
912
913/* Delayed-work routine to carry out SCSI-device scanning */
914static void usb_stor_scan_dwork(struct work_struct *work)
915{
916 struct us_data *us = container_of(work, struct us_data,
917 scan_dwork.work);
918 struct device *dev = &us->pusb_intf->dev;
919
920 dev_dbg(dev, "starting scan\n");
921
922 /* For bulk-only devices, determine the max LUN value */
923 if (us->protocol == USB_PR_BULK &&
924 !(us->fflags & US_FL_SINGLE_LUN) &&
925 !(us->fflags & US_FL_SCM_MULT_TARG)) {
926 mutex_lock(&us->dev_mutex);
927 us->max_lun = usb_stor_Bulk_max_lun(us);
928 /*
929 * Allow proper scanning of devices that present more than 8 LUNs
930 * While not affecting other devices that may need the previous
931 * behavior
932 */
933 if (us->max_lun >= 8)
934 us_to_host(us)->max_lun = us->max_lun+1;
935 mutex_unlock(&us->dev_mutex);
936 }
937 scsi_scan_host(us_to_host(us));
938 dev_dbg(dev, "scan complete\n");
939
940 /* Should we unbind if no devices were detected? */
941
942 usb_autopm_put_interface(us->pusb_intf);
943 clear_bit(US_FLIDX_SCAN_PENDING, &us->dflags);
944}
945
946static unsigned int usb_stor_sg_tablesize(struct usb_interface *intf)
947{
948 struct usb_device *usb_dev = interface_to_usbdev(intf);
949
950 if (usb_dev->bus->sg_tablesize) {
951 return usb_dev->bus->sg_tablesize;
952 }
953 return SG_ALL;
954}
955
956/* First part of general USB mass-storage probing */
957int usb_stor_probe1(struct us_data **pus,
958 struct usb_interface *intf,
959 const struct usb_device_id *id,
960 struct us_unusual_dev *unusual_dev,
961 struct scsi_host_template *sht)
962{
963 struct Scsi_Host *host;
964 struct us_data *us;
965 int result;
966
967 dev_info(&intf->dev, "USB Mass Storage device detected\n");
968
969 /*
970 * Ask the SCSI layer to allocate a host structure, with extra
971 * space at the end for our private us_data structure.
972 */
973 host = scsi_host_alloc(sht, sizeof(*us));
974 if (!host) {
975 dev_warn(&intf->dev, "Unable to allocate the scsi host\n");
976 return -ENOMEM;
977 }
978
979 /*
980 * Allow 16-byte CDBs and thus > 2TB
981 */
982 host->max_cmd_len = 16;
983 host->sg_tablesize = usb_stor_sg_tablesize(intf);
984 *pus = us = host_to_us(host);
985 mutex_init(&(us->dev_mutex));
986 us_set_lock_class(&us->dev_mutex, intf);
987 init_completion(&us->cmnd_ready);
988 init_completion(&(us->notify));
989 init_waitqueue_head(&us->delay_wait);
990 INIT_DELAYED_WORK(&us->scan_dwork, usb_stor_scan_dwork);
991
992 /* Associate the us_data structure with the USB device */
993 result = associate_dev(us, intf);
994 if (result)
995 goto BadDevice;
996
997 /* Get the unusual_devs entries and the descriptors */
998 result = get_device_info(us, id, unusual_dev);
999 if (result)
1000 goto BadDevice;
1001
1002 /* Get standard transport and protocol settings */
1003 get_transport(us);
1004 get_protocol(us);
1005
1006 /*
1007 * Give the caller a chance to fill in specialized transport
1008 * or protocol settings.
1009 */
1010 return 0;
1011
1012BadDevice:
1013 usb_stor_dbg(us, "storage_probe() failed\n");
1014 release_everything(us);
1015 return result;
1016}
1017EXPORT_SYMBOL_GPL(usb_stor_probe1);
1018
1019/* Second part of general USB mass-storage probing */
1020int usb_stor_probe2(struct us_data *us)
1021{
1022 int result;
1023 struct device *dev = &us->pusb_intf->dev;
1024
1025 /* Make sure the transport and protocol have both been set */
1026 if (!us->transport || !us->proto_handler) {
1027 result = -ENXIO;
1028 goto BadDevice;
1029 }
1030 usb_stor_dbg(us, "Transport: %s\n", us->transport_name);
1031 usb_stor_dbg(us, "Protocol: %s\n", us->protocol_name);
1032
1033 if (us->fflags & US_FL_SCM_MULT_TARG) {
1034 /*
1035 * SCM eUSCSI bridge devices can have different numbers
1036 * of LUNs on different targets; allow all to be probed.
1037 */
1038 us->max_lun = 7;
1039 /* The eUSCSI itself has ID 7, so avoid scanning that */
1040 us_to_host(us)->this_id = 7;
1041 /* max_id is 8 initially, so no need to set it here */
1042 } else {
1043 /* In the normal case there is only a single target */
1044 us_to_host(us)->max_id = 1;
1045 /*
1046 * Like Windows, we won't store the LUN bits in CDB[1] for
1047 * SCSI-2 devices using the Bulk-Only transport (even though
1048 * this violates the SCSI spec).
1049 */
1050 if (us->transport == usb_stor_Bulk_transport)
1051 us_to_host(us)->no_scsi2_lun_in_cdb = 1;
1052 }
1053
1054 /* fix for single-lun devices */
1055 if (us->fflags & US_FL_SINGLE_LUN)
1056 us->max_lun = 0;
1057
1058 /* Find the endpoints and calculate pipe values */
1059 result = get_pipes(us);
1060 if (result)
1061 goto BadDevice;
1062
1063 /*
1064 * If the device returns invalid data for the first READ(10)
1065 * command, indicate the command should be retried.
1066 */
1067 if (us->fflags & US_FL_INITIAL_READ10)
1068 set_bit(US_FLIDX_REDO_READ10, &us->dflags);
1069
1070 /* Acquire all the other resources and add the host */
1071 result = usb_stor_acquire_resources(us);
1072 if (result)
1073 goto BadDevice;
1074 usb_autopm_get_interface_no_resume(us->pusb_intf);
1075 snprintf(us->scsi_name, sizeof(us->scsi_name), "usb-storage %s",
1076 dev_name(&us->pusb_intf->dev));
1077 result = scsi_add_host(us_to_host(us), dev);
1078 if (result) {
1079 dev_warn(dev,
1080 "Unable to add the scsi host\n");
1081 goto HostAddErr;
1082 }
1083
1084 /* Submit the delayed_work for SCSI-device scanning */
1085 set_bit(US_FLIDX_SCAN_PENDING, &us->dflags);
1086
1087 if (delay_use > 0)
1088 dev_dbg(dev, "waiting for device to settle before scanning\n");
1089 queue_delayed_work(system_freezable_wq, &us->scan_dwork,
1090 delay_use * HZ);
1091 return 0;
1092
1093 /* We come here if there are any problems */
1094HostAddErr:
1095 usb_autopm_put_interface_no_suspend(us->pusb_intf);
1096BadDevice:
1097 usb_stor_dbg(us, "storage_probe() failed\n");
1098 release_everything(us);
1099 return result;
1100}
1101EXPORT_SYMBOL_GPL(usb_stor_probe2);
1102
1103/* Handle a USB mass-storage disconnect */
1104void usb_stor_disconnect(struct usb_interface *intf)
1105{
1106 struct us_data *us = usb_get_intfdata(intf);
1107
1108 quiesce_and_remove_host(us);
1109 release_everything(us);
1110}
1111EXPORT_SYMBOL_GPL(usb_stor_disconnect);
1112
1113static struct scsi_host_template usb_stor_host_template;
1114
1115/* The main probe routine for standard devices */
1116static int storage_probe(struct usb_interface *intf,
1117 const struct usb_device_id *id)
1118{
1119 struct us_unusual_dev *unusual_dev;
1120 struct us_data *us;
1121 int result;
1122 int size;
1123
1124 /* If uas is enabled and this device can do uas then ignore it. */
1125#if IS_ENABLED(CONFIG_USB_UAS)
1126 if (uas_use_uas_driver(intf, id, NULL))
1127 return -ENXIO;
1128#endif
1129
1130 /*
1131 * If the device isn't standard (is handled by a subdriver
1132 * module) then don't accept it.
1133 */
1134 if (usb_usual_ignore_device(intf))
1135 return -ENXIO;
1136
1137 /*
1138 * Call the general probe procedures.
1139 *
1140 * The unusual_dev_list array is parallel to the usb_storage_usb_ids
1141 * table, so we use the index of the id entry to find the
1142 * corresponding unusual_devs entry.
1143 */
1144
1145 size = ARRAY_SIZE(us_unusual_dev_list);
1146 if (id >= usb_storage_usb_ids && id < usb_storage_usb_ids + size) {
1147 unusual_dev = (id - usb_storage_usb_ids) + us_unusual_dev_list;
1148 } else {
1149 unusual_dev = &for_dynamic_ids;
1150
1151 dev_dbg(&intf->dev, "Use Bulk-Only transport with the Transparent SCSI protocol for dynamic id: 0x%04x 0x%04x\n",
1152 id->idVendor, id->idProduct);
1153 }
1154
1155 result = usb_stor_probe1(&us, intf, id, unusual_dev,
1156 &usb_stor_host_template);
1157 if (result)
1158 return result;
1159
1160 /* No special transport or protocol settings in the main module */
1161
1162 result = usb_stor_probe2(us);
1163 return result;
1164}
1165
1166static struct usb_driver usb_storage_driver = {
1167 .name = DRV_NAME,
1168 .probe = storage_probe,
1169 .disconnect = usb_stor_disconnect,
1170 .suspend = usb_stor_suspend,
1171 .resume = usb_stor_resume,
1172 .reset_resume = usb_stor_reset_resume,
1173 .pre_reset = usb_stor_pre_reset,
1174 .post_reset = usb_stor_post_reset,
1175 .id_table = usb_storage_usb_ids,
1176 .supports_autosuspend = 1,
1177 .soft_unbind = 1,
1178};
1179
1180module_usb_stor_driver(usb_storage_driver, usb_stor_host_template, DRV_NAME);