Loading...
1/*
2 * OHCI HCD (Host Controller Driver) for USB.
3 *
4 * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
5 * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
6 *
7 * This file is licenced under the GPL.
8 */
9
10/*
11 * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to
12 * __leXX (normally) or __beXX (given OHCI_BIG_ENDIAN), depending on the
13 * host controller implementation.
14 */
15typedef __u32 __bitwise __hc32;
16typedef __u16 __bitwise __hc16;
17
18/*
19 * OHCI Endpoint Descriptor (ED) ... holds TD queue
20 * See OHCI spec, section 4.2
21 *
22 * This is a "Queue Head" for those transfers, which is why
23 * both EHCI and UHCI call similar structures a "QH".
24 */
25struct ed {
26 /* first fields are hardware-specified */
27 __hc32 hwINFO; /* endpoint config bitmap */
28 /* info bits defined by hcd */
29#define ED_DEQUEUE (1 << 27)
30 /* info bits defined by the hardware */
31#define ED_ISO (1 << 15)
32#define ED_SKIP (1 << 14)
33#define ED_LOWSPEED (1 << 13)
34#define ED_OUT (0x01 << 11)
35#define ED_IN (0x02 << 11)
36 __hc32 hwTailP; /* tail of TD list */
37 __hc32 hwHeadP; /* head of TD list (hc r/w) */
38#define ED_C (0x02) /* toggle carry */
39#define ED_H (0x01) /* halted */
40 __hc32 hwNextED; /* next ED in list */
41
42 /* rest are purely for the driver's use */
43 dma_addr_t dma; /* addr of ED */
44 struct td *dummy; /* next TD to activate */
45
46 /* host's view of schedule */
47 struct ed *ed_next; /* on schedule or rm_list */
48 struct ed *ed_prev; /* for non-interrupt EDs */
49 struct list_head td_list; /* "shadow list" of our TDs */
50
51 /* create --> IDLE --> OPER --> ... --> IDLE --> destroy
52 * usually: OPER --> UNLINK --> (IDLE | OPER) --> ...
53 */
54 u8 state; /* ED_{IDLE,UNLINK,OPER} */
55#define ED_IDLE 0x00 /* NOT linked to HC */
56#define ED_UNLINK 0x01 /* being unlinked from hc */
57#define ED_OPER 0x02 /* IS linked to hc */
58
59 u8 type; /* PIPE_{BULK,...} */
60
61 /* periodic scheduling params (for intr and iso) */
62 u8 branch;
63 u16 interval;
64 u16 load;
65 u16 last_iso; /* iso only */
66
67 /* HC may see EDs on rm_list until next frame (frame_no == tick) */
68 u16 tick;
69} __attribute__ ((aligned(16)));
70
71#define ED_MASK ((u32)~0x0f) /* strip hw status in low addr bits */
72
73
74/*
75 * OHCI Transfer Descriptor (TD) ... one per transfer segment
76 * See OHCI spec, sections 4.3.1 (general = control/bulk/interrupt)
77 * and 4.3.2 (iso)
78 */
79struct td {
80 /* first fields are hardware-specified */
81 __hc32 hwINFO; /* transfer info bitmask */
82
83 /* hwINFO bits for both general and iso tds: */
84#define TD_CC 0xf0000000 /* condition code */
85#define TD_CC_GET(td_p) ((td_p >>28) & 0x0f)
86//#define TD_CC_SET(td_p, cc) (td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28)
87#define TD_DI 0x00E00000 /* frames before interrupt */
88#define TD_DI_SET(X) (((X) & 0x07)<< 21)
89 /* these two bits are available for definition/use by HCDs in both
90 * general and iso tds ... others are available for only one type
91 */
92#define TD_DONE 0x00020000 /* retired to donelist */
93#define TD_ISO 0x00010000 /* copy of ED_ISO */
94
95 /* hwINFO bits for general tds: */
96#define TD_EC 0x0C000000 /* error count */
97#define TD_T 0x03000000 /* data toggle state */
98#define TD_T_DATA0 0x02000000 /* DATA0 */
99#define TD_T_DATA1 0x03000000 /* DATA1 */
100#define TD_T_TOGGLE 0x00000000 /* uses ED_C */
101#define TD_DP 0x00180000 /* direction/pid */
102#define TD_DP_SETUP 0x00000000 /* SETUP pid */
103#define TD_DP_IN 0x00100000 /* IN pid */
104#define TD_DP_OUT 0x00080000 /* OUT pid */
105 /* 0x00180000 rsvd */
106#define TD_R 0x00040000 /* round: short packets OK? */
107
108 /* (no hwINFO #defines yet for iso tds) */
109
110 __hc32 hwCBP; /* Current Buffer Pointer (or 0) */
111 __hc32 hwNextTD; /* Next TD Pointer */
112 __hc32 hwBE; /* Memory Buffer End Pointer */
113
114 /* PSW is only for ISO. Only 1 PSW entry is used, but on
115 * big-endian PPC hardware that's the second entry.
116 */
117#define MAXPSW 2
118 __hc16 hwPSW [MAXPSW];
119
120 /* rest are purely for the driver's use */
121 __u8 index;
122 struct ed *ed;
123 struct td *td_hash; /* dma-->td hashtable */
124 struct td *next_dl_td;
125 struct urb *urb;
126
127 dma_addr_t td_dma; /* addr of this TD */
128 dma_addr_t data_dma; /* addr of data it points to */
129
130 struct list_head td_list; /* "shadow list", TDs on same ED */
131} __attribute__ ((aligned(32))); /* c/b/i need 16; only iso needs 32 */
132
133#define TD_MASK ((u32)~0x1f) /* strip hw status in low addr bits */
134
135/*
136 * Hardware transfer status codes -- CC from td->hwINFO or td->hwPSW
137 */
138#define TD_CC_NOERROR 0x00
139#define TD_CC_CRC 0x01
140#define TD_CC_BITSTUFFING 0x02
141#define TD_CC_DATATOGGLEM 0x03
142#define TD_CC_STALL 0x04
143#define TD_DEVNOTRESP 0x05
144#define TD_PIDCHECKFAIL 0x06
145#define TD_UNEXPECTEDPID 0x07
146#define TD_DATAOVERRUN 0x08
147#define TD_DATAUNDERRUN 0x09
148 /* 0x0A, 0x0B reserved for hardware */
149#define TD_BUFFEROVERRUN 0x0C
150#define TD_BUFFERUNDERRUN 0x0D
151 /* 0x0E, 0x0F reserved for HCD */
152#define TD_NOTACCESSED 0x0F
153
154
155/* map OHCI TD status codes (CC) to errno values */
156static const int cc_to_error [16] = {
157 /* No Error */ 0,
158 /* CRC Error */ -EILSEQ,
159 /* Bit Stuff */ -EPROTO,
160 /* Data Togg */ -EILSEQ,
161 /* Stall */ -EPIPE,
162 /* DevNotResp */ -ETIME,
163 /* PIDCheck */ -EPROTO,
164 /* UnExpPID */ -EPROTO,
165 /* DataOver */ -EOVERFLOW,
166 /* DataUnder */ -EREMOTEIO,
167 /* (for hw) */ -EIO,
168 /* (for hw) */ -EIO,
169 /* BufferOver */ -ECOMM,
170 /* BuffUnder */ -ENOSR,
171 /* (for HCD) */ -EALREADY,
172 /* (for HCD) */ -EALREADY
173};
174
175
176/*
177 * The HCCA (Host Controller Communications Area) is a 256 byte
178 * structure defined section 4.4.1 of the OHCI spec. The HC is
179 * told the base address of it. It must be 256-byte aligned.
180 */
181struct ohci_hcca {
182#define NUM_INTS 32
183 __hc32 int_table [NUM_INTS]; /* periodic schedule */
184
185 /*
186 * OHCI defines u16 frame_no, followed by u16 zero pad.
187 * Since some processors can't do 16 bit bus accesses,
188 * portable access must be a 32 bits wide.
189 */
190 __hc32 frame_no; /* current frame number */
191 __hc32 done_head; /* info returned for an interrupt */
192 u8 reserved_for_hc [116];
193 u8 what [4]; /* spec only identifies 252 bytes :) */
194} __attribute__ ((aligned(256)));
195
196/*
197 * This is the structure of the OHCI controller's memory mapped I/O region.
198 * You must use readl() and writel() (in <asm/io.h>) to access these fields!!
199 * Layout is in section 7 (and appendix B) of the spec.
200 */
201struct ohci_regs {
202 /* control and status registers (section 7.1) */
203 __hc32 revision;
204 __hc32 control;
205 __hc32 cmdstatus;
206 __hc32 intrstatus;
207 __hc32 intrenable;
208 __hc32 intrdisable;
209
210 /* memory pointers (section 7.2) */
211 __hc32 hcca;
212 __hc32 ed_periodcurrent;
213 __hc32 ed_controlhead;
214 __hc32 ed_controlcurrent;
215 __hc32 ed_bulkhead;
216 __hc32 ed_bulkcurrent;
217 __hc32 donehead;
218
219 /* frame counters (section 7.3) */
220 __hc32 fminterval;
221 __hc32 fmremaining;
222 __hc32 fmnumber;
223 __hc32 periodicstart;
224 __hc32 lsthresh;
225
226 /* Root hub ports (section 7.4) */
227 struct ohci_roothub_regs {
228 __hc32 a;
229 __hc32 b;
230 __hc32 status;
231#define MAX_ROOT_PORTS 15 /* maximum OHCI root hub ports (RH_A_NDP) */
232 __hc32 portstatus [MAX_ROOT_PORTS];
233 } roothub;
234
235 /* and optional "legacy support" registers (appendix B) at 0x0100 */
236
237} __attribute__ ((aligned(32)));
238
239
240/* OHCI CONTROL AND STATUS REGISTER MASKS */
241
242/*
243 * HcControl (control) register masks
244 */
245#define OHCI_CTRL_CBSR (3 << 0) /* control/bulk service ratio */
246#define OHCI_CTRL_PLE (1 << 2) /* periodic list enable */
247#define OHCI_CTRL_IE (1 << 3) /* isochronous enable */
248#define OHCI_CTRL_CLE (1 << 4) /* control list enable */
249#define OHCI_CTRL_BLE (1 << 5) /* bulk list enable */
250#define OHCI_CTRL_HCFS (3 << 6) /* host controller functional state */
251#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
252#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */
253#define OHCI_CTRL_RWE (1 << 10) /* remote wakeup enable */
254
255/* pre-shifted values for HCFS */
256# define OHCI_USB_RESET (0 << 6)
257# define OHCI_USB_RESUME (1 << 6)
258# define OHCI_USB_OPER (2 << 6)
259# define OHCI_USB_SUSPEND (3 << 6)
260
261/*
262 * HcCommandStatus (cmdstatus) register masks
263 */
264#define OHCI_HCR (1 << 0) /* host controller reset */
265#define OHCI_CLF (1 << 1) /* control list filled */
266#define OHCI_BLF (1 << 2) /* bulk list filled */
267#define OHCI_OCR (1 << 3) /* ownership change request */
268#define OHCI_SOC (3 << 16) /* scheduling overrun count */
269
270/*
271 * masks used with interrupt registers:
272 * HcInterruptStatus (intrstatus)
273 * HcInterruptEnable (intrenable)
274 * HcInterruptDisable (intrdisable)
275 */
276#define OHCI_INTR_SO (1 << 0) /* scheduling overrun */
277#define OHCI_INTR_WDH (1 << 1) /* writeback of done_head */
278#define OHCI_INTR_SF (1 << 2) /* start frame */
279#define OHCI_INTR_RD (1 << 3) /* resume detect */
280#define OHCI_INTR_UE (1 << 4) /* unrecoverable error */
281#define OHCI_INTR_FNO (1 << 5) /* frame number overflow */
282#define OHCI_INTR_RHSC (1 << 6) /* root hub status change */
283#define OHCI_INTR_OC (1 << 30) /* ownership change */
284#define OHCI_INTR_MIE (1 << 31) /* master interrupt enable */
285
286
287/* OHCI ROOT HUB REGISTER MASKS */
288
289/* roothub.portstatus [i] bits */
290#define RH_PS_CCS 0x00000001 /* current connect status */
291#define RH_PS_PES 0x00000002 /* port enable status*/
292#define RH_PS_PSS 0x00000004 /* port suspend status */
293#define RH_PS_POCI 0x00000008 /* port over current indicator */
294#define RH_PS_PRS 0x00000010 /* port reset status */
295#define RH_PS_PPS 0x00000100 /* port power status */
296#define RH_PS_LSDA 0x00000200 /* low speed device attached */
297#define RH_PS_CSC 0x00010000 /* connect status change */
298#define RH_PS_PESC 0x00020000 /* port enable status change */
299#define RH_PS_PSSC 0x00040000 /* port suspend status change */
300#define RH_PS_OCIC 0x00080000 /* over current indicator change */
301#define RH_PS_PRSC 0x00100000 /* port reset status change */
302
303/* roothub.status bits */
304#define RH_HS_LPS 0x00000001 /* local power status */
305#define RH_HS_OCI 0x00000002 /* over current indicator */
306#define RH_HS_DRWE 0x00008000 /* device remote wakeup enable */
307#define RH_HS_LPSC 0x00010000 /* local power status change */
308#define RH_HS_OCIC 0x00020000 /* over current indicator change */
309#define RH_HS_CRWE 0x80000000 /* clear remote wakeup enable */
310
311/* roothub.b masks */
312#define RH_B_DR 0x0000ffff /* device removable flags */
313#define RH_B_PPCM 0xffff0000 /* port power control mask */
314
315/* roothub.a masks */
316#define RH_A_NDP (0xff << 0) /* number of downstream ports */
317#define RH_A_PSM (1 << 8) /* power switching mode */
318#define RH_A_NPS (1 << 9) /* no power switching */
319#define RH_A_DT (1 << 10) /* device type (mbz) */
320#define RH_A_OCPM (1 << 11) /* over current protection mode */
321#define RH_A_NOCP (1 << 12) /* no over current protection */
322#define RH_A_POTPGT (0xff << 24) /* power on to power good time */
323
324
325/* hcd-private per-urb state */
326typedef struct urb_priv {
327 struct ed *ed;
328 u16 length; // # tds in this request
329 u16 td_cnt; // tds already serviced
330 struct list_head pending;
331 struct td *td [0]; // all TDs in this request
332
333} urb_priv_t;
334
335#define TD_HASH_SIZE 64 /* power'o'two */
336// sizeof (struct td) ~= 64 == 2^6 ...
337#define TD_HASH_FUNC(td_dma) ((td_dma ^ (td_dma >> 6)) % TD_HASH_SIZE)
338
339
340/*
341 * This is the full ohci controller description
342 *
343 * Note how the "proper" USB information is just
344 * a subset of what the full implementation needs. (Linus)
345 */
346
347struct ohci_hcd {
348 spinlock_t lock;
349
350 /*
351 * I/O memory used to communicate with the HC (dma-consistent)
352 */
353 struct ohci_regs __iomem *regs;
354
355 /*
356 * main memory used to communicate with the HC (dma-consistent).
357 * hcd adds to schedule for a live hc any time, but removals finish
358 * only at the start of the next frame.
359 */
360 struct ohci_hcca *hcca;
361 dma_addr_t hcca_dma;
362
363 struct ed *ed_rm_list; /* to be removed */
364
365 struct ed *ed_bulktail; /* last in bulk list */
366 struct ed *ed_controltail; /* last in ctrl list */
367 struct ed *periodic [NUM_INTS]; /* shadow int_table */
368
369 /*
370 * OTG controllers and transceivers need software interaction;
371 * other external transceivers should be software-transparent
372 */
373 struct otg_transceiver *transceiver;
374 void (*start_hnp)(struct ohci_hcd *ohci);
375
376 /*
377 * memory management for queue data structures
378 */
379 struct dma_pool *td_cache;
380 struct dma_pool *ed_cache;
381 struct td *td_hash [TD_HASH_SIZE];
382 struct list_head pending;
383
384 /*
385 * driver state
386 */
387 int num_ports;
388 int load [NUM_INTS];
389 u32 hc_control; /* copy of hc control reg */
390 unsigned long next_statechange; /* suspend/resume */
391 u32 fminterval; /* saved register */
392 unsigned autostop:1; /* rh auto stopping/stopped */
393
394 unsigned long flags; /* for HC bugs */
395#define OHCI_QUIRK_AMD756 0x01 /* erratum #4 */
396#define OHCI_QUIRK_SUPERIO 0x02 /* natsemi */
397#define OHCI_QUIRK_INITRESET 0x04 /* SiS, OPTi, ... */
398#define OHCI_QUIRK_BE_DESC 0x08 /* BE descriptors */
399#define OHCI_QUIRK_BE_MMIO 0x10 /* BE registers */
400#define OHCI_QUIRK_ZFMICRO 0x20 /* Compaq ZFMicro chipset*/
401#define OHCI_QUIRK_NEC 0x40 /* lost interrupts */
402#define OHCI_QUIRK_FRAME_NO 0x80 /* no big endian frame_no shift */
403#define OHCI_QUIRK_HUB_POWER 0x100 /* distrust firmware power/oc setup */
404#define OHCI_QUIRK_AMD_PLL 0x200 /* AMD PLL quirk*/
405#define OHCI_QUIRK_AMD_PREFETCH 0x400 /* pre-fetch for ISO transfer */
406#define OHCI_QUIRK_SHUTDOWN 0x800 /* nVidia power bug */
407 // there are also chip quirks/bugs in init logic
408
409 struct work_struct nec_work; /* Worker for NEC quirk */
410
411 /* Needed for ZF Micro quirk */
412 struct timer_list unlink_watchdog;
413 unsigned eds_scheduled;
414 struct ed *ed_to_check;
415 unsigned zf_delay;
416
417#ifdef DEBUG
418 struct dentry *debug_dir;
419 struct dentry *debug_async;
420 struct dentry *debug_periodic;
421 struct dentry *debug_registers;
422#endif
423};
424
425#ifdef CONFIG_PCI
426static inline int quirk_nec(struct ohci_hcd *ohci)
427{
428 return ohci->flags & OHCI_QUIRK_NEC;
429}
430static inline int quirk_zfmicro(struct ohci_hcd *ohci)
431{
432 return ohci->flags & OHCI_QUIRK_ZFMICRO;
433}
434static inline int quirk_amdiso(struct ohci_hcd *ohci)
435{
436 return ohci->flags & OHCI_QUIRK_AMD_PLL;
437}
438static inline int quirk_amdprefetch(struct ohci_hcd *ohci)
439{
440 return ohci->flags & OHCI_QUIRK_AMD_PREFETCH;
441}
442#else
443static inline int quirk_nec(struct ohci_hcd *ohci)
444{
445 return 0;
446}
447static inline int quirk_zfmicro(struct ohci_hcd *ohci)
448{
449 return 0;
450}
451static inline int quirk_amdiso(struct ohci_hcd *ohci)
452{
453 return 0;
454}
455static inline int quirk_amdprefetch(struct ohci_hcd *ohci)
456{
457 return 0;
458}
459#endif
460
461/* convert between an hcd pointer and the corresponding ohci_hcd */
462static inline struct ohci_hcd *hcd_to_ohci (struct usb_hcd *hcd)
463{
464 return (struct ohci_hcd *) (hcd->hcd_priv);
465}
466static inline struct usb_hcd *ohci_to_hcd (const struct ohci_hcd *ohci)
467{
468 return container_of ((void *) ohci, struct usb_hcd, hcd_priv);
469}
470
471/*-------------------------------------------------------------------------*/
472
473#ifndef DEBUG
474#define STUB_DEBUG_FILES
475#endif /* DEBUG */
476
477#define ohci_dbg(ohci, fmt, args...) \
478 dev_dbg (ohci_to_hcd(ohci)->self.controller , fmt , ## args )
479#define ohci_err(ohci, fmt, args...) \
480 dev_err (ohci_to_hcd(ohci)->self.controller , fmt , ## args )
481#define ohci_info(ohci, fmt, args...) \
482 dev_info (ohci_to_hcd(ohci)->self.controller , fmt , ## args )
483#define ohci_warn(ohci, fmt, args...) \
484 dev_warn (ohci_to_hcd(ohci)->self.controller , fmt , ## args )
485
486#ifdef OHCI_VERBOSE_DEBUG
487# define ohci_vdbg ohci_dbg
488#else
489# define ohci_vdbg(ohci, fmt, args...) do { } while (0)
490#endif
491
492/*-------------------------------------------------------------------------*/
493
494/*
495 * While most USB host controllers implement their registers and
496 * in-memory communication descriptors in little-endian format,
497 * a minority (notably the IBM STB04XXX and the Motorola MPC5200
498 * processors) implement them in big endian format.
499 *
500 * In addition some more exotic implementations like the Toshiba
501 * Spider (aka SCC) cell southbridge are "mixed" endian, that is,
502 * they have a different endianness for registers vs. in-memory
503 * descriptors.
504 *
505 * This attempts to support either format at compile time without a
506 * runtime penalty, or both formats with the additional overhead
507 * of checking a flag bit.
508 *
509 * That leads to some tricky Kconfig rules howevber. There are
510 * different defaults based on some arch/ppc platforms, though
511 * the basic rules are:
512 *
513 * Controller type Kconfig options needed
514 * --------------- ----------------------
515 * little endian CONFIG_USB_OHCI_LITTLE_ENDIAN
516 *
517 * fully big endian CONFIG_USB_OHCI_BIG_ENDIAN_DESC _and_
518 * CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
519 *
520 * mixed endian CONFIG_USB_OHCI_LITTLE_ENDIAN _and_
521 * CONFIG_USB_OHCI_BIG_ENDIAN_{MMIO,DESC}
522 *
523 * (If you have a mixed endian controller, you -must- also define
524 * CONFIG_USB_OHCI_LITTLE_ENDIAN or things will not work when building
525 * both your mixed endian and a fully big endian controller support in
526 * the same kernel image).
527 */
528
529#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_DESC
530#ifdef CONFIG_USB_OHCI_LITTLE_ENDIAN
531#define big_endian_desc(ohci) (ohci->flags & OHCI_QUIRK_BE_DESC)
532#else
533#define big_endian_desc(ohci) 1 /* only big endian */
534#endif
535#else
536#define big_endian_desc(ohci) 0 /* only little endian */
537#endif
538
539#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
540#ifdef CONFIG_USB_OHCI_LITTLE_ENDIAN
541#define big_endian_mmio(ohci) (ohci->flags & OHCI_QUIRK_BE_MMIO)
542#else
543#define big_endian_mmio(ohci) 1 /* only big endian */
544#endif
545#else
546#define big_endian_mmio(ohci) 0 /* only little endian */
547#endif
548
549/*
550 * Big-endian read/write functions are arch-specific.
551 * Other arches can be added if/when they're needed.
552 *
553 */
554static inline unsigned int _ohci_readl (const struct ohci_hcd *ohci,
555 __hc32 __iomem * regs)
556{
557#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
558 return big_endian_mmio(ohci) ?
559 readl_be (regs) :
560 readl (regs);
561#else
562 return readl (regs);
563#endif
564}
565
566static inline void _ohci_writel (const struct ohci_hcd *ohci,
567 const unsigned int val, __hc32 __iomem *regs)
568{
569#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
570 big_endian_mmio(ohci) ?
571 writel_be (val, regs) :
572 writel (val, regs);
573#else
574 writel (val, regs);
575#endif
576}
577
578#define ohci_readl(o,r) _ohci_readl(o,r)
579#define ohci_writel(o,v,r) _ohci_writel(o,v,r)
580
581
582/*-------------------------------------------------------------------------*/
583
584/* cpu to ohci */
585static inline __hc16 cpu_to_hc16 (const struct ohci_hcd *ohci, const u16 x)
586{
587 return big_endian_desc(ohci) ?
588 (__force __hc16)cpu_to_be16(x) :
589 (__force __hc16)cpu_to_le16(x);
590}
591
592static inline __hc16 cpu_to_hc16p (const struct ohci_hcd *ohci, const u16 *x)
593{
594 return big_endian_desc(ohci) ?
595 cpu_to_be16p(x) :
596 cpu_to_le16p(x);
597}
598
599static inline __hc32 cpu_to_hc32 (const struct ohci_hcd *ohci, const u32 x)
600{
601 return big_endian_desc(ohci) ?
602 (__force __hc32)cpu_to_be32(x) :
603 (__force __hc32)cpu_to_le32(x);
604}
605
606static inline __hc32 cpu_to_hc32p (const struct ohci_hcd *ohci, const u32 *x)
607{
608 return big_endian_desc(ohci) ?
609 cpu_to_be32p(x) :
610 cpu_to_le32p(x);
611}
612
613/* ohci to cpu */
614static inline u16 hc16_to_cpu (const struct ohci_hcd *ohci, const __hc16 x)
615{
616 return big_endian_desc(ohci) ?
617 be16_to_cpu((__force __be16)x) :
618 le16_to_cpu((__force __le16)x);
619}
620
621static inline u16 hc16_to_cpup (const struct ohci_hcd *ohci, const __hc16 *x)
622{
623 return big_endian_desc(ohci) ?
624 be16_to_cpup((__force __be16 *)x) :
625 le16_to_cpup((__force __le16 *)x);
626}
627
628static inline u32 hc32_to_cpu (const struct ohci_hcd *ohci, const __hc32 x)
629{
630 return big_endian_desc(ohci) ?
631 be32_to_cpu((__force __be32)x) :
632 le32_to_cpu((__force __le32)x);
633}
634
635static inline u32 hc32_to_cpup (const struct ohci_hcd *ohci, const __hc32 *x)
636{
637 return big_endian_desc(ohci) ?
638 be32_to_cpup((__force __be32 *)x) :
639 le32_to_cpup((__force __le32 *)x);
640}
641
642/*-------------------------------------------------------------------------*/
643
644/* HCCA frame number is 16 bits, but is accessed as 32 bits since not all
645 * hardware handles 16 bit reads. That creates a different confusion on
646 * some big-endian SOC implementations. Same thing happens with PSW access.
647 */
648
649#ifdef CONFIG_PPC_MPC52xx
650#define big_endian_frame_no_quirk(ohci) (ohci->flags & OHCI_QUIRK_FRAME_NO)
651#else
652#define big_endian_frame_no_quirk(ohci) 0
653#endif
654
655static inline u16 ohci_frame_no(const struct ohci_hcd *ohci)
656{
657 u32 tmp;
658 if (big_endian_desc(ohci)) {
659 tmp = be32_to_cpup((__force __be32 *)&ohci->hcca->frame_no);
660 if (!big_endian_frame_no_quirk(ohci))
661 tmp >>= 16;
662 } else
663 tmp = le32_to_cpup((__force __le32 *)&ohci->hcca->frame_no);
664
665 return (u16)tmp;
666}
667
668static inline __hc16 *ohci_hwPSWp(const struct ohci_hcd *ohci,
669 const struct td *td, int index)
670{
671 return (__hc16 *)(big_endian_desc(ohci) ?
672 &td->hwPSW[index ^ 1] : &td->hwPSW[index]);
673}
674
675static inline u16 ohci_hwPSW(const struct ohci_hcd *ohci,
676 const struct td *td, int index)
677{
678 return hc16_to_cpup(ohci, ohci_hwPSWp(ohci, td, index));
679}
680
681/*-------------------------------------------------------------------------*/
682
683static inline void disable (struct ohci_hcd *ohci)
684{
685 ohci_to_hcd(ohci)->state = HC_STATE_HALT;
686}
687
688#define FI 0x2edf /* 12000 bits per frame (-1) */
689#define FSMP(fi) (0x7fff & ((6 * ((fi) - 210)) / 7))
690#define FIT (1 << 31)
691#define LSTHRESH 0x628 /* lowspeed bit threshold */
692
693static inline void periodic_reinit (struct ohci_hcd *ohci)
694{
695 u32 fi = ohci->fminterval & 0x03fff;
696 u32 fit = ohci_readl(ohci, &ohci->regs->fminterval) & FIT;
697
698 ohci_writel (ohci, (fit ^ FIT) | ohci->fminterval,
699 &ohci->regs->fminterval);
700 ohci_writel (ohci, ((9 * fi) / 10) & 0x3fff,
701 &ohci->regs->periodicstart);
702}
703
704/* AMD-756 (D2 rev) reports corrupt register contents in some cases.
705 * The erratum (#4) description is incorrect. AMD's workaround waits
706 * till some bits (mostly reserved) are clear; ok for all revs.
707 */
708#define read_roothub(hc, register, mask) ({ \
709 u32 temp = ohci_readl (hc, &hc->regs->roothub.register); \
710 if (temp == -1) \
711 disable (hc); \
712 else if (hc->flags & OHCI_QUIRK_AMD756) \
713 while (temp & mask) \
714 temp = ohci_readl (hc, &hc->regs->roothub.register); \
715 temp; })
716
717static inline u32 roothub_a (struct ohci_hcd *hc)
718 { return read_roothub (hc, a, 0xfc0fe000); }
719static inline u32 roothub_b (struct ohci_hcd *hc)
720 { return ohci_readl (hc, &hc->regs->roothub.b); }
721static inline u32 roothub_status (struct ohci_hcd *hc)
722 { return ohci_readl (hc, &hc->regs->roothub.status); }
723static inline u32 roothub_portstatus (struct ohci_hcd *hc, int i)
724 { return read_roothub (hc, portstatus [i], 0xffe0fce0); }
1/*
2 * OHCI HCD (Host Controller Driver) for USB.
3 *
4 * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
5 * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
6 *
7 * This file is licenced under the GPL.
8 */
9
10/*
11 * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to
12 * __leXX (normally) or __beXX (given OHCI_BIG_ENDIAN), depending on the
13 * host controller implementation.
14 */
15typedef __u32 __bitwise __hc32;
16typedef __u16 __bitwise __hc16;
17
18/*
19 * OHCI Endpoint Descriptor (ED) ... holds TD queue
20 * See OHCI spec, section 4.2
21 *
22 * This is a "Queue Head" for those transfers, which is why
23 * both EHCI and UHCI call similar structures a "QH".
24 */
25struct ed {
26 /* first fields are hardware-specified */
27 __hc32 hwINFO; /* endpoint config bitmap */
28 /* info bits defined by hcd */
29#define ED_DEQUEUE (1 << 27)
30 /* info bits defined by the hardware */
31#define ED_ISO (1 << 15)
32#define ED_SKIP (1 << 14)
33#define ED_LOWSPEED (1 << 13)
34#define ED_OUT (0x01 << 11)
35#define ED_IN (0x02 << 11)
36 __hc32 hwTailP; /* tail of TD list */
37 __hc32 hwHeadP; /* head of TD list (hc r/w) */
38#define ED_C (0x02) /* toggle carry */
39#define ED_H (0x01) /* halted */
40 __hc32 hwNextED; /* next ED in list */
41
42 /* rest are purely for the driver's use */
43 dma_addr_t dma; /* addr of ED */
44 struct td *dummy; /* next TD to activate */
45
46 /* host's view of schedule */
47 struct ed *ed_next; /* on schedule or rm_list */
48 struct ed *ed_prev; /* for non-interrupt EDs */
49 struct list_head td_list; /* "shadow list" of our TDs */
50 struct list_head in_use_list;
51
52 /* create --> IDLE --> OPER --> ... --> IDLE --> destroy
53 * usually: OPER --> UNLINK --> (IDLE | OPER) --> ...
54 */
55 u8 state; /* ED_{IDLE,UNLINK,OPER} */
56#define ED_IDLE 0x00 /* NOT linked to HC */
57#define ED_UNLINK 0x01 /* being unlinked from hc */
58#define ED_OPER 0x02 /* IS linked to hc */
59
60 u8 type; /* PIPE_{BULK,...} */
61
62 /* periodic scheduling params (for intr and iso) */
63 u8 branch;
64 u16 interval;
65 u16 load;
66 u16 last_iso; /* iso only */
67
68 /* HC may see EDs on rm_list until next frame (frame_no == tick) */
69 u16 tick;
70
71 /* Detect TDs not added to the done queue */
72 unsigned takeback_wdh_cnt;
73 struct td *pending_td;
74#define OKAY_TO_TAKEBACK(ohci, ed) \
75 ((int) (ohci->wdh_cnt - ed->takeback_wdh_cnt) >= 0)
76
77} __attribute__ ((aligned(16)));
78
79#define ED_MASK ((u32)~0x0f) /* strip hw status in low addr bits */
80
81
82/*
83 * OHCI Transfer Descriptor (TD) ... one per transfer segment
84 * See OHCI spec, sections 4.3.1 (general = control/bulk/interrupt)
85 * and 4.3.2 (iso)
86 */
87struct td {
88 /* first fields are hardware-specified */
89 __hc32 hwINFO; /* transfer info bitmask */
90
91 /* hwINFO bits for both general and iso tds: */
92#define TD_CC 0xf0000000 /* condition code */
93#define TD_CC_GET(td_p) ((td_p >>28) & 0x0f)
94//#define TD_CC_SET(td_p, cc) (td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28)
95#define TD_DI 0x00E00000 /* frames before interrupt */
96#define TD_DI_SET(X) (((X) & 0x07)<< 21)
97 /* these two bits are available for definition/use by HCDs in both
98 * general and iso tds ... others are available for only one type
99 */
100#define TD_DONE 0x00020000 /* retired to donelist */
101#define TD_ISO 0x00010000 /* copy of ED_ISO */
102
103 /* hwINFO bits for general tds: */
104#define TD_EC 0x0C000000 /* error count */
105#define TD_T 0x03000000 /* data toggle state */
106#define TD_T_DATA0 0x02000000 /* DATA0 */
107#define TD_T_DATA1 0x03000000 /* DATA1 */
108#define TD_T_TOGGLE 0x00000000 /* uses ED_C */
109#define TD_DP 0x00180000 /* direction/pid */
110#define TD_DP_SETUP 0x00000000 /* SETUP pid */
111#define TD_DP_IN 0x00100000 /* IN pid */
112#define TD_DP_OUT 0x00080000 /* OUT pid */
113 /* 0x00180000 rsvd */
114#define TD_R 0x00040000 /* round: short packets OK? */
115
116 /* (no hwINFO #defines yet for iso tds) */
117
118 __hc32 hwCBP; /* Current Buffer Pointer (or 0) */
119 __hc32 hwNextTD; /* Next TD Pointer */
120 __hc32 hwBE; /* Memory Buffer End Pointer */
121
122 /* PSW is only for ISO. Only 1 PSW entry is used, but on
123 * big-endian PPC hardware that's the second entry.
124 */
125#define MAXPSW 2
126 __hc16 hwPSW [MAXPSW];
127
128 /* rest are purely for the driver's use */
129 __u8 index;
130 struct ed *ed;
131 struct td *td_hash; /* dma-->td hashtable */
132 struct td *next_dl_td;
133 struct urb *urb;
134
135 dma_addr_t td_dma; /* addr of this TD */
136 dma_addr_t data_dma; /* addr of data it points to */
137
138 struct list_head td_list; /* "shadow list", TDs on same ED */
139} __attribute__ ((aligned(32))); /* c/b/i need 16; only iso needs 32 */
140
141#define TD_MASK ((u32)~0x1f) /* strip hw status in low addr bits */
142
143/*
144 * Hardware transfer status codes -- CC from td->hwINFO or td->hwPSW
145 */
146#define TD_CC_NOERROR 0x00
147#define TD_CC_CRC 0x01
148#define TD_CC_BITSTUFFING 0x02
149#define TD_CC_DATATOGGLEM 0x03
150#define TD_CC_STALL 0x04
151#define TD_DEVNOTRESP 0x05
152#define TD_PIDCHECKFAIL 0x06
153#define TD_UNEXPECTEDPID 0x07
154#define TD_DATAOVERRUN 0x08
155#define TD_DATAUNDERRUN 0x09
156 /* 0x0A, 0x0B reserved for hardware */
157#define TD_BUFFEROVERRUN 0x0C
158#define TD_BUFFERUNDERRUN 0x0D
159 /* 0x0E, 0x0F reserved for HCD */
160#define TD_NOTACCESSED 0x0F
161
162
163/* map OHCI TD status codes (CC) to errno values */
164static const int cc_to_error [16] = {
165 /* No Error */ 0,
166 /* CRC Error */ -EILSEQ,
167 /* Bit Stuff */ -EPROTO,
168 /* Data Togg */ -EILSEQ,
169 /* Stall */ -EPIPE,
170 /* DevNotResp */ -ETIME,
171 /* PIDCheck */ -EPROTO,
172 /* UnExpPID */ -EPROTO,
173 /* DataOver */ -EOVERFLOW,
174 /* DataUnder */ -EREMOTEIO,
175 /* (for hw) */ -EIO,
176 /* (for hw) */ -EIO,
177 /* BufferOver */ -ECOMM,
178 /* BuffUnder */ -ENOSR,
179 /* (for HCD) */ -EALREADY,
180 /* (for HCD) */ -EALREADY
181};
182
183
184/*
185 * The HCCA (Host Controller Communications Area) is a 256 byte
186 * structure defined section 4.4.1 of the OHCI spec. The HC is
187 * told the base address of it. It must be 256-byte aligned.
188 */
189struct ohci_hcca {
190#define NUM_INTS 32
191 __hc32 int_table [NUM_INTS]; /* periodic schedule */
192
193 /*
194 * OHCI defines u16 frame_no, followed by u16 zero pad.
195 * Since some processors can't do 16 bit bus accesses,
196 * portable access must be a 32 bits wide.
197 */
198 __hc32 frame_no; /* current frame number */
199 __hc32 done_head; /* info returned for an interrupt */
200 u8 reserved_for_hc [116];
201 u8 what [4]; /* spec only identifies 252 bytes :) */
202} __attribute__ ((aligned(256)));
203
204/*
205 * This is the structure of the OHCI controller's memory mapped I/O region.
206 * You must use readl() and writel() (in <asm/io.h>) to access these fields!!
207 * Layout is in section 7 (and appendix B) of the spec.
208 */
209struct ohci_regs {
210 /* control and status registers (section 7.1) */
211 __hc32 revision;
212 __hc32 control;
213 __hc32 cmdstatus;
214 __hc32 intrstatus;
215 __hc32 intrenable;
216 __hc32 intrdisable;
217
218 /* memory pointers (section 7.2) */
219 __hc32 hcca;
220 __hc32 ed_periodcurrent;
221 __hc32 ed_controlhead;
222 __hc32 ed_controlcurrent;
223 __hc32 ed_bulkhead;
224 __hc32 ed_bulkcurrent;
225 __hc32 donehead;
226
227 /* frame counters (section 7.3) */
228 __hc32 fminterval;
229 __hc32 fmremaining;
230 __hc32 fmnumber;
231 __hc32 periodicstart;
232 __hc32 lsthresh;
233
234 /* Root hub ports (section 7.4) */
235 struct ohci_roothub_regs {
236 __hc32 a;
237 __hc32 b;
238 __hc32 status;
239#define MAX_ROOT_PORTS 15 /* maximum OHCI root hub ports (RH_A_NDP) */
240 __hc32 portstatus [MAX_ROOT_PORTS];
241 } roothub;
242
243 /* and optional "legacy support" registers (appendix B) at 0x0100 */
244
245} __attribute__ ((aligned(32)));
246
247
248/* OHCI CONTROL AND STATUS REGISTER MASKS */
249
250/*
251 * HcControl (control) register masks
252 */
253#define OHCI_CTRL_CBSR (3 << 0) /* control/bulk service ratio */
254#define OHCI_CTRL_PLE (1 << 2) /* periodic list enable */
255#define OHCI_CTRL_IE (1 << 3) /* isochronous enable */
256#define OHCI_CTRL_CLE (1 << 4) /* control list enable */
257#define OHCI_CTRL_BLE (1 << 5) /* bulk list enable */
258#define OHCI_CTRL_HCFS (3 << 6) /* host controller functional state */
259#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
260#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */
261#define OHCI_CTRL_RWE (1 << 10) /* remote wakeup enable */
262
263/* pre-shifted values for HCFS */
264# define OHCI_USB_RESET (0 << 6)
265# define OHCI_USB_RESUME (1 << 6)
266# define OHCI_USB_OPER (2 << 6)
267# define OHCI_USB_SUSPEND (3 << 6)
268
269/*
270 * HcCommandStatus (cmdstatus) register masks
271 */
272#define OHCI_HCR (1 << 0) /* host controller reset */
273#define OHCI_CLF (1 << 1) /* control list filled */
274#define OHCI_BLF (1 << 2) /* bulk list filled */
275#define OHCI_OCR (1 << 3) /* ownership change request */
276#define OHCI_SOC (3 << 16) /* scheduling overrun count */
277
278/*
279 * masks used with interrupt registers:
280 * HcInterruptStatus (intrstatus)
281 * HcInterruptEnable (intrenable)
282 * HcInterruptDisable (intrdisable)
283 */
284#define OHCI_INTR_SO (1 << 0) /* scheduling overrun */
285#define OHCI_INTR_WDH (1 << 1) /* writeback of done_head */
286#define OHCI_INTR_SF (1 << 2) /* start frame */
287#define OHCI_INTR_RD (1 << 3) /* resume detect */
288#define OHCI_INTR_UE (1 << 4) /* unrecoverable error */
289#define OHCI_INTR_FNO (1 << 5) /* frame number overflow */
290#define OHCI_INTR_RHSC (1 << 6) /* root hub status change */
291#define OHCI_INTR_OC (1 << 30) /* ownership change */
292#define OHCI_INTR_MIE (1 << 31) /* master interrupt enable */
293
294
295/* OHCI ROOT HUB REGISTER MASKS */
296
297/* roothub.portstatus [i] bits */
298#define RH_PS_CCS 0x00000001 /* current connect status */
299#define RH_PS_PES 0x00000002 /* port enable status*/
300#define RH_PS_PSS 0x00000004 /* port suspend status */
301#define RH_PS_POCI 0x00000008 /* port over current indicator */
302#define RH_PS_PRS 0x00000010 /* port reset status */
303#define RH_PS_PPS 0x00000100 /* port power status */
304#define RH_PS_LSDA 0x00000200 /* low speed device attached */
305#define RH_PS_CSC 0x00010000 /* connect status change */
306#define RH_PS_PESC 0x00020000 /* port enable status change */
307#define RH_PS_PSSC 0x00040000 /* port suspend status change */
308#define RH_PS_OCIC 0x00080000 /* over current indicator change */
309#define RH_PS_PRSC 0x00100000 /* port reset status change */
310
311/* roothub.status bits */
312#define RH_HS_LPS 0x00000001 /* local power status */
313#define RH_HS_OCI 0x00000002 /* over current indicator */
314#define RH_HS_DRWE 0x00008000 /* device remote wakeup enable */
315#define RH_HS_LPSC 0x00010000 /* local power status change */
316#define RH_HS_OCIC 0x00020000 /* over current indicator change */
317#define RH_HS_CRWE 0x80000000 /* clear remote wakeup enable */
318
319/* roothub.b masks */
320#define RH_B_DR 0x0000ffff /* device removable flags */
321#define RH_B_PPCM 0xffff0000 /* port power control mask */
322
323/* roothub.a masks */
324#define RH_A_NDP (0xff << 0) /* number of downstream ports */
325#define RH_A_PSM (1 << 8) /* power switching mode */
326#define RH_A_NPS (1 << 9) /* no power switching */
327#define RH_A_DT (1 << 10) /* device type (mbz) */
328#define RH_A_OCPM (1 << 11) /* over current protection mode */
329#define RH_A_NOCP (1 << 12) /* no over current protection */
330#define RH_A_POTPGT (0xff << 24) /* power on to power good time */
331
332
333/* hcd-private per-urb state */
334typedef struct urb_priv {
335 struct ed *ed;
336 u16 length; // # tds in this request
337 u16 td_cnt; // tds already serviced
338 struct list_head pending;
339 struct td *td [0]; // all TDs in this request
340
341} urb_priv_t;
342
343#define TD_HASH_SIZE 64 /* power'o'two */
344// sizeof (struct td) ~= 64 == 2^6 ...
345#define TD_HASH_FUNC(td_dma) ((td_dma ^ (td_dma >> 6)) % TD_HASH_SIZE)
346
347
348/*
349 * This is the full ohci controller description
350 *
351 * Note how the "proper" USB information is just
352 * a subset of what the full implementation needs. (Linus)
353 */
354
355enum ohci_rh_state {
356 OHCI_RH_HALTED,
357 OHCI_RH_SUSPENDED,
358 OHCI_RH_RUNNING
359};
360
361struct ohci_hcd {
362 spinlock_t lock;
363
364 /*
365 * I/O memory used to communicate with the HC (dma-consistent)
366 */
367 struct ohci_regs __iomem *regs;
368
369 /*
370 * main memory used to communicate with the HC (dma-consistent).
371 * hcd adds to schedule for a live hc any time, but removals finish
372 * only at the start of the next frame.
373 */
374 struct ohci_hcca *hcca;
375 dma_addr_t hcca_dma;
376
377 struct ed *ed_rm_list; /* to be removed */
378
379 struct ed *ed_bulktail; /* last in bulk list */
380 struct ed *ed_controltail; /* last in ctrl list */
381 struct ed *periodic [NUM_INTS]; /* shadow int_table */
382
383 void (*start_hnp)(struct ohci_hcd *ohci);
384
385 /*
386 * memory management for queue data structures
387 */
388 struct dma_pool *td_cache;
389 struct dma_pool *ed_cache;
390 struct td *td_hash [TD_HASH_SIZE];
391 struct td *dl_start, *dl_end; /* the done list */
392 struct list_head pending;
393 struct list_head eds_in_use; /* all EDs with at least 1 TD */
394
395 /*
396 * driver state
397 */
398 enum ohci_rh_state rh_state;
399 int num_ports;
400 int load [NUM_INTS];
401 u32 hc_control; /* copy of hc control reg */
402 unsigned long next_statechange; /* suspend/resume */
403 u32 fminterval; /* saved register */
404 unsigned autostop:1; /* rh auto stopping/stopped */
405 unsigned working:1;
406 unsigned restart_work:1;
407
408 unsigned long flags; /* for HC bugs */
409#define OHCI_QUIRK_AMD756 0x01 /* erratum #4 */
410#define OHCI_QUIRK_SUPERIO 0x02 /* natsemi */
411#define OHCI_QUIRK_INITRESET 0x04 /* SiS, OPTi, ... */
412#define OHCI_QUIRK_BE_DESC 0x08 /* BE descriptors */
413#define OHCI_QUIRK_BE_MMIO 0x10 /* BE registers */
414#define OHCI_QUIRK_ZFMICRO 0x20 /* Compaq ZFMicro chipset*/
415#define OHCI_QUIRK_NEC 0x40 /* lost interrupts */
416#define OHCI_QUIRK_FRAME_NO 0x80 /* no big endian frame_no shift */
417#define OHCI_QUIRK_HUB_POWER 0x100 /* distrust firmware power/oc setup */
418#define OHCI_QUIRK_AMD_PLL 0x200 /* AMD PLL quirk*/
419#define OHCI_QUIRK_AMD_PREFETCH 0x400 /* pre-fetch for ISO transfer */
420#define OHCI_QUIRK_GLOBAL_SUSPEND 0x800 /* must suspend ports */
421
422 // there are also chip quirks/bugs in init logic
423
424 unsigned prev_frame_no;
425 unsigned wdh_cnt, prev_wdh_cnt;
426 u32 prev_donehead;
427 struct timer_list io_watchdog;
428
429 struct work_struct nec_work; /* Worker for NEC quirk */
430
431 struct dentry *debug_dir;
432 struct dentry *debug_async;
433 struct dentry *debug_periodic;
434 struct dentry *debug_registers;
435
436 /* platform-specific data -- must come last */
437 unsigned long priv[0] __aligned(sizeof(s64));
438
439};
440
441#ifdef CONFIG_PCI
442static inline int quirk_nec(struct ohci_hcd *ohci)
443{
444 return ohci->flags & OHCI_QUIRK_NEC;
445}
446static inline int quirk_zfmicro(struct ohci_hcd *ohci)
447{
448 return ohci->flags & OHCI_QUIRK_ZFMICRO;
449}
450static inline int quirk_amdiso(struct ohci_hcd *ohci)
451{
452 return ohci->flags & OHCI_QUIRK_AMD_PLL;
453}
454static inline int quirk_amdprefetch(struct ohci_hcd *ohci)
455{
456 return ohci->flags & OHCI_QUIRK_AMD_PREFETCH;
457}
458#else
459static inline int quirk_nec(struct ohci_hcd *ohci)
460{
461 return 0;
462}
463static inline int quirk_zfmicro(struct ohci_hcd *ohci)
464{
465 return 0;
466}
467static inline int quirk_amdiso(struct ohci_hcd *ohci)
468{
469 return 0;
470}
471static inline int quirk_amdprefetch(struct ohci_hcd *ohci)
472{
473 return 0;
474}
475#endif
476
477/* convert between an hcd pointer and the corresponding ohci_hcd */
478static inline struct ohci_hcd *hcd_to_ohci (struct usb_hcd *hcd)
479{
480 return (struct ohci_hcd *) (hcd->hcd_priv);
481}
482static inline struct usb_hcd *ohci_to_hcd (const struct ohci_hcd *ohci)
483{
484 return container_of ((void *) ohci, struct usb_hcd, hcd_priv);
485}
486
487/*-------------------------------------------------------------------------*/
488
489#define ohci_dbg(ohci, fmt, args...) \
490 dev_dbg (ohci_to_hcd(ohci)->self.controller , fmt , ## args )
491#define ohci_err(ohci, fmt, args...) \
492 dev_err (ohci_to_hcd(ohci)->self.controller , fmt , ## args )
493#define ohci_info(ohci, fmt, args...) \
494 dev_info (ohci_to_hcd(ohci)->self.controller , fmt , ## args )
495#define ohci_warn(ohci, fmt, args...) \
496 dev_warn (ohci_to_hcd(ohci)->self.controller , fmt , ## args )
497
498/*-------------------------------------------------------------------------*/
499
500/*
501 * While most USB host controllers implement their registers and
502 * in-memory communication descriptors in little-endian format,
503 * a minority (notably the IBM STB04XXX and the Motorola MPC5200
504 * processors) implement them in big endian format.
505 *
506 * In addition some more exotic implementations like the Toshiba
507 * Spider (aka SCC) cell southbridge are "mixed" endian, that is,
508 * they have a different endianness for registers vs. in-memory
509 * descriptors.
510 *
511 * This attempts to support either format at compile time without a
512 * runtime penalty, or both formats with the additional overhead
513 * of checking a flag bit.
514 *
515 * That leads to some tricky Kconfig rules howevber. There are
516 * different defaults based on some arch/ppc platforms, though
517 * the basic rules are:
518 *
519 * Controller type Kconfig options needed
520 * --------------- ----------------------
521 * little endian CONFIG_USB_OHCI_LITTLE_ENDIAN
522 *
523 * fully big endian CONFIG_USB_OHCI_BIG_ENDIAN_DESC _and_
524 * CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
525 *
526 * mixed endian CONFIG_USB_OHCI_LITTLE_ENDIAN _and_
527 * CONFIG_USB_OHCI_BIG_ENDIAN_{MMIO,DESC}
528 *
529 * (If you have a mixed endian controller, you -must- also define
530 * CONFIG_USB_OHCI_LITTLE_ENDIAN or things will not work when building
531 * both your mixed endian and a fully big endian controller support in
532 * the same kernel image).
533 */
534
535#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_DESC
536#ifdef CONFIG_USB_OHCI_LITTLE_ENDIAN
537#define big_endian_desc(ohci) (ohci->flags & OHCI_QUIRK_BE_DESC)
538#else
539#define big_endian_desc(ohci) 1 /* only big endian */
540#endif
541#else
542#define big_endian_desc(ohci) 0 /* only little endian */
543#endif
544
545#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
546#ifdef CONFIG_USB_OHCI_LITTLE_ENDIAN
547#define big_endian_mmio(ohci) (ohci->flags & OHCI_QUIRK_BE_MMIO)
548#else
549#define big_endian_mmio(ohci) 1 /* only big endian */
550#endif
551#else
552#define big_endian_mmio(ohci) 0 /* only little endian */
553#endif
554
555/*
556 * Big-endian read/write functions are arch-specific.
557 * Other arches can be added if/when they're needed.
558 *
559 */
560static inline unsigned int _ohci_readl (const struct ohci_hcd *ohci,
561 __hc32 __iomem * regs)
562{
563#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
564 return big_endian_mmio(ohci) ?
565 readl_be (regs) :
566 readl (regs);
567#else
568 return readl (regs);
569#endif
570}
571
572static inline void _ohci_writel (const struct ohci_hcd *ohci,
573 const unsigned int val, __hc32 __iomem *regs)
574{
575#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
576 big_endian_mmio(ohci) ?
577 writel_be (val, regs) :
578 writel (val, regs);
579#else
580 writel (val, regs);
581#endif
582}
583
584#define ohci_readl(o,r) _ohci_readl(o,r)
585#define ohci_writel(o,v,r) _ohci_writel(o,v,r)
586
587
588/*-------------------------------------------------------------------------*/
589
590/* cpu to ohci */
591static inline __hc16 cpu_to_hc16 (const struct ohci_hcd *ohci, const u16 x)
592{
593 return big_endian_desc(ohci) ?
594 (__force __hc16)cpu_to_be16(x) :
595 (__force __hc16)cpu_to_le16(x);
596}
597
598static inline __hc16 cpu_to_hc16p (const struct ohci_hcd *ohci, const u16 *x)
599{
600 return big_endian_desc(ohci) ?
601 cpu_to_be16p(x) :
602 cpu_to_le16p(x);
603}
604
605static inline __hc32 cpu_to_hc32 (const struct ohci_hcd *ohci, const u32 x)
606{
607 return big_endian_desc(ohci) ?
608 (__force __hc32)cpu_to_be32(x) :
609 (__force __hc32)cpu_to_le32(x);
610}
611
612static inline __hc32 cpu_to_hc32p (const struct ohci_hcd *ohci, const u32 *x)
613{
614 return big_endian_desc(ohci) ?
615 cpu_to_be32p(x) :
616 cpu_to_le32p(x);
617}
618
619/* ohci to cpu */
620static inline u16 hc16_to_cpu (const struct ohci_hcd *ohci, const __hc16 x)
621{
622 return big_endian_desc(ohci) ?
623 be16_to_cpu((__force __be16)x) :
624 le16_to_cpu((__force __le16)x);
625}
626
627static inline u16 hc16_to_cpup (const struct ohci_hcd *ohci, const __hc16 *x)
628{
629 return big_endian_desc(ohci) ?
630 be16_to_cpup((__force __be16 *)x) :
631 le16_to_cpup((__force __le16 *)x);
632}
633
634static inline u32 hc32_to_cpu (const struct ohci_hcd *ohci, const __hc32 x)
635{
636 return big_endian_desc(ohci) ?
637 be32_to_cpu((__force __be32)x) :
638 le32_to_cpu((__force __le32)x);
639}
640
641static inline u32 hc32_to_cpup (const struct ohci_hcd *ohci, const __hc32 *x)
642{
643 return big_endian_desc(ohci) ?
644 be32_to_cpup((__force __be32 *)x) :
645 le32_to_cpup((__force __le32 *)x);
646}
647
648/*-------------------------------------------------------------------------*/
649
650/*
651 * The HCCA frame number is 16 bits, but is accessed as 32 bits since not all
652 * hardware handles 16 bit reads. Depending on the SoC implementation, the
653 * frame number can wind up in either bits [31:16] (default) or
654 * [15:0] (OHCI_QUIRK_FRAME_NO) on big endian hosts.
655 *
656 * Somewhat similarly, the 16-bit PSW fields in a transfer descriptor are
657 * reordered on BE.
658 */
659
660static inline u16 ohci_frame_no(const struct ohci_hcd *ohci)
661{
662 u32 tmp;
663 if (big_endian_desc(ohci)) {
664 tmp = be32_to_cpup((__force __be32 *)&ohci->hcca->frame_no);
665 if (!(ohci->flags & OHCI_QUIRK_FRAME_NO))
666 tmp >>= 16;
667 } else
668 tmp = le32_to_cpup((__force __le32 *)&ohci->hcca->frame_no);
669
670 return (u16)tmp;
671}
672
673static inline __hc16 *ohci_hwPSWp(const struct ohci_hcd *ohci,
674 const struct td *td, int index)
675{
676 return (__hc16 *)(big_endian_desc(ohci) ?
677 &td->hwPSW[index ^ 1] : &td->hwPSW[index]);
678}
679
680static inline u16 ohci_hwPSW(const struct ohci_hcd *ohci,
681 const struct td *td, int index)
682{
683 return hc16_to_cpup(ohci, ohci_hwPSWp(ohci, td, index));
684}
685
686/*-------------------------------------------------------------------------*/
687
688#define FI 0x2edf /* 12000 bits per frame (-1) */
689#define FSMP(fi) (0x7fff & ((6 * ((fi) - 210)) / 7))
690#define FIT (1 << 31)
691#define LSTHRESH 0x628 /* lowspeed bit threshold */
692
693static inline void periodic_reinit (struct ohci_hcd *ohci)
694{
695 u32 fi = ohci->fminterval & 0x03fff;
696 u32 fit = ohci_readl(ohci, &ohci->regs->fminterval) & FIT;
697
698 ohci_writel (ohci, (fit ^ FIT) | ohci->fminterval,
699 &ohci->regs->fminterval);
700 ohci_writel (ohci, ((9 * fi) / 10) & 0x3fff,
701 &ohci->regs->periodicstart);
702}
703
704/* AMD-756 (D2 rev) reports corrupt register contents in some cases.
705 * The erratum (#4) description is incorrect. AMD's workaround waits
706 * till some bits (mostly reserved) are clear; ok for all revs.
707 */
708#define read_roothub(hc, register, mask) ({ \
709 u32 temp = ohci_readl (hc, &hc->regs->roothub.register); \
710 if (temp == -1) \
711 hc->rh_state = OHCI_RH_HALTED; \
712 else if (hc->flags & OHCI_QUIRK_AMD756) \
713 while (temp & mask) \
714 temp = ohci_readl (hc, &hc->regs->roothub.register); \
715 temp; })
716
717static inline u32 roothub_a (struct ohci_hcd *hc)
718 { return read_roothub (hc, a, 0xfc0fe000); }
719static inline u32 roothub_b (struct ohci_hcd *hc)
720 { return ohci_readl (hc, &hc->regs->roothub.b); }
721static inline u32 roothub_status (struct ohci_hcd *hc)
722 { return ohci_readl (hc, &hc->regs->roothub.status); }
723static inline u32 roothub_portstatus (struct ohci_hcd *hc, int i)
724 { return read_roothub (hc, portstatus [i], 0xffe0fce0); }
725
726/* Declarations of things exported for use by ohci platform drivers */
727
728struct ohci_driver_overrides {
729 const char *product_desc;
730 size_t extra_priv_size;
731 int (*reset)(struct usb_hcd *hcd);
732};
733
734extern void ohci_init_driver(struct hc_driver *drv,
735 const struct ohci_driver_overrides *over);
736extern int ohci_restart(struct ohci_hcd *ohci);
737extern int ohci_setup(struct usb_hcd *hcd);
738extern int ohci_suspend(struct usb_hcd *hcd, bool do_wakeup);
739extern int ohci_resume(struct usb_hcd *hcd, bool hibernated);
740extern int ohci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
741 u16 wIndex, char *buf, u16 wLength);
742extern int ohci_hub_status_data(struct usb_hcd *hcd, char *buf);