Linux Audio

Check our new training course

Yocto / OpenEmbedded training

Feb 10-13, 2025
Register
Loading...
v3.1
  1/*
  2 * EHCI HCD (Host Controller Driver) for USB.
  3 *
  4 * Bus Glue for PPC On-Chip EHCI driver on the of_platform bus
  5 * Tested on AMCC PPC 440EPx
  6 *
  7 * Valentine Barshak <vbarshak@ru.mvista.com>
  8 *
  9 * Based on "ehci-ppc-soc.c" by Stefan Roese <sr@denx.de>
 10 * and "ohci-ppc-of.c" by Sylvain Munaut <tnt@246tNt.com>
 11 *
 12 * This file is licenced under the GPL.
 13 */
 14
 
 15#include <linux/signal.h>
 16
 17#include <linux/of.h>
 
 
 18#include <linux/of_platform.h>
 19
 20/* called during probe() after chip reset completes */
 21static int ehci_ppc_of_setup(struct usb_hcd *hcd)
 22{
 23	struct ehci_hcd	*ehci = hcd_to_ehci(hcd);
 24	int		retval;
 25
 26	retval = ehci_halt(ehci);
 27	if (retval)
 28		return retval;
 29
 30	retval = ehci_init(hcd);
 31	if (retval)
 32		return retval;
 33
 34	ehci->sbrn = 0x20;
 35	return ehci_reset(ehci);
 36}
 37
 38
 39static const struct hc_driver ehci_ppc_of_hc_driver = {
 40	.description		= hcd_name,
 41	.product_desc		= "OF EHCI",
 42	.hcd_priv_size		= sizeof(struct ehci_hcd),
 43
 44	/*
 45	 * generic hardware linkage
 46	 */
 47	.irq			= ehci_irq,
 48	.flags			= HCD_MEMORY | HCD_USB2,
 49
 50	/*
 51	 * basic lifecycle operations
 52	 */
 53	.reset			= ehci_ppc_of_setup,
 54	.start			= ehci_run,
 55	.stop			= ehci_stop,
 56	.shutdown		= ehci_shutdown,
 57
 58	/*
 59	 * managing i/o requests and associated device resources
 60	 */
 61	.urb_enqueue		= ehci_urb_enqueue,
 62	.urb_dequeue		= ehci_urb_dequeue,
 63	.endpoint_disable	= ehci_endpoint_disable,
 64	.endpoint_reset		= ehci_endpoint_reset,
 65
 66	/*
 67	 * scheduling support
 68	 */
 69	.get_frame_number	= ehci_get_frame,
 70
 71	/*
 72	 * root hub support
 73	 */
 74	.hub_status_data	= ehci_hub_status_data,
 75	.hub_control		= ehci_hub_control,
 76#ifdef	CONFIG_PM
 77	.bus_suspend		= ehci_bus_suspend,
 78	.bus_resume		= ehci_bus_resume,
 79#endif
 80	.relinquish_port	= ehci_relinquish_port,
 81	.port_handed_over	= ehci_port_handed_over,
 82
 83	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
 84};
 85
 86
 87/*
 88 * 440EPx Errata USBH_3
 89 * Fix: Enable Break Memory Transfer (BMT) in INSNREG3
 90 */
 91#define PPC440EPX_EHCI0_INSREG_BMT	(0x1 << 0)
 92static int __devinit
 93ppc44x_enable_bmt(struct device_node *dn)
 94{
 95	__iomem u32 *insreg_virt;
 96
 97	insreg_virt = of_iomap(dn, 1);
 98	if (!insreg_virt)
 99		return  -EINVAL;
100
101	out_be32(insreg_virt + 3, PPC440EPX_EHCI0_INSREG_BMT);
102
103	iounmap(insreg_virt);
104	return 0;
105}
106
107
108static int __devinit ehci_hcd_ppc_of_probe(struct platform_device *op)
109{
110	struct device_node *dn = op->dev.of_node;
111	struct usb_hcd *hcd;
112	struct ehci_hcd	*ehci = NULL;
113	struct resource res;
114	int irq;
115	int rv;
116
117	struct device_node *np;
118
119	if (usb_disabled())
120		return -ENODEV;
121
122	dev_dbg(&op->dev, "initializing PPC-OF USB Controller\n");
123
124	rv = of_address_to_resource(dn, 0, &res);
125	if (rv)
126		return rv;
127
128	hcd = usb_create_hcd(&ehci_ppc_of_hc_driver, &op->dev, "PPC-OF USB");
129	if (!hcd)
130		return -ENOMEM;
131
132	hcd->rsrc_start = res.start;
133	hcd->rsrc_len = resource_size(&res);
134
135	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
136		printk(KERN_ERR "%s: request_mem_region failed\n", __FILE__);
137		rv = -EBUSY;
138		goto err_rmr;
139	}
140
141	irq = irq_of_parse_and_map(dn, 0);
142	if (irq == NO_IRQ) {
143		printk(KERN_ERR "%s: irq_of_parse_and_map failed\n", __FILE__);
 
144		rv = -EBUSY;
145		goto err_irq;
146	}
147
148	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
149	if (!hcd->regs) {
150		printk(KERN_ERR "%s: ioremap failed\n", __FILE__);
151		rv = -ENOMEM;
152		goto err_ioremap;
153	}
154
155	ehci = hcd_to_ehci(hcd);
156	np = of_find_compatible_node(NULL, NULL, "ibm,usb-ohci-440epx");
157	if (np != NULL) {
158		/* claim we really affected by usb23 erratum */
159		if (!of_address_to_resource(np, 0, &res))
160			ehci->ohci_hcctrl_reg = ioremap(res.start +
161					OHCI_HCCTRL_OFFSET, OHCI_HCCTRL_LEN);
 
 
162		else
163			pr_debug("%s: no ohci offset in fdt\n", __FILE__);
164		if (!ehci->ohci_hcctrl_reg) {
165			pr_debug("%s: ioremap for ohci hcctrl failed\n", __FILE__);
166		} else {
167			ehci->has_amcc_usb23 = 1;
168		}
169	}
170
171	if (of_get_property(dn, "big-endian", NULL)) {
172		ehci->big_endian_mmio = 1;
173		ehci->big_endian_desc = 1;
174	}
175	if (of_get_property(dn, "big-endian-regs", NULL))
176		ehci->big_endian_mmio = 1;
177	if (of_get_property(dn, "big-endian-desc", NULL))
178		ehci->big_endian_desc = 1;
179
180	ehci->caps = hcd->regs;
181	ehci->regs = hcd->regs +
182		HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
183
184	/* cache this readonly data; minimize chip reads */
185	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
186
187	if (of_device_is_compatible(dn, "ibm,usb-ehci-440epx")) {
188		rv = ppc44x_enable_bmt(dn);
189		ehci_dbg(ehci, "Break Memory Transfer (BMT) is %senabled!\n",
190				rv ? "NOT ": "");
191	}
192
193	rv = usb_add_hcd(hcd, irq, 0);
194	if (rv)
195		goto err_ehci;
196
 
197	return 0;
198
199err_ehci:
200	if (ehci->has_amcc_usb23)
201		iounmap(ehci->ohci_hcctrl_reg);
202	iounmap(hcd->regs);
203err_ioremap:
204	irq_dispose_mapping(irq);
205err_irq:
206	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
207err_rmr:
208	usb_put_hcd(hcd);
209
210	return rv;
211}
212
213
214static int ehci_hcd_ppc_of_remove(struct platform_device *op)
215{
216	struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
217	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
218
219	struct device_node *np;
220	struct resource res;
221
222	dev_set_drvdata(&op->dev, NULL);
223
224	dev_dbg(&op->dev, "stopping PPC-OF USB Controller\n");
225
226	usb_remove_hcd(hcd);
227
228	iounmap(hcd->regs);
229	irq_dispose_mapping(hcd->irq);
230	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
231
232	/* use request_mem_region to test if the ohci driver is loaded.  if so
233	 * ensure the ohci core is operational.
234	 */
235	if (ehci->has_amcc_usb23) {
236		np = of_find_compatible_node(NULL, NULL, "ibm,usb-ohci-440epx");
237		if (np != NULL) {
238			if (!of_address_to_resource(np, 0, &res))
239				if (!request_mem_region(res.start,
240							    0x4, hcd_name))
241					set_ohci_hcfs(ehci, 1);
242				else
243					release_mem_region(res.start, 0x4);
244			else
245				pr_debug("%s: no ohci offset in fdt\n", __FILE__);
246			of_node_put(np);
247		}
248
249		iounmap(ehci->ohci_hcctrl_reg);
250	}
251	usb_put_hcd(hcd);
252
253	return 0;
254}
255
256
257static void ehci_hcd_ppc_of_shutdown(struct platform_device *op)
258{
259	struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
260
261	if (hcd->driver->shutdown)
262		hcd->driver->shutdown(hcd);
263}
264
265
266static const struct of_device_id ehci_hcd_ppc_of_match[] = {
267	{
268		.compatible = "usb-ehci",
269	},
270	{},
271};
272MODULE_DEVICE_TABLE(of, ehci_hcd_ppc_of_match);
273
274
275static struct platform_driver ehci_hcd_ppc_of_driver = {
276	.probe		= ehci_hcd_ppc_of_probe,
277	.remove		= ehci_hcd_ppc_of_remove,
278	.shutdown	= ehci_hcd_ppc_of_shutdown,
279	.driver = {
280		.name = "ppc-of-ehci",
281		.owner = THIS_MODULE,
282		.of_match_table = ehci_hcd_ppc_of_match,
283	},
284};
v4.10.11
  1/*
  2 * EHCI HCD (Host Controller Driver) for USB.
  3 *
  4 * Bus Glue for PPC On-Chip EHCI driver on the of_platform bus
  5 * Tested on AMCC PPC 440EPx
  6 *
  7 * Valentine Barshak <vbarshak@ru.mvista.com>
  8 *
  9 * Based on "ehci-ppc-soc.c" by Stefan Roese <sr@denx.de>
 10 * and "ohci-ppc-of.c" by Sylvain Munaut <tnt@246tNt.com>
 11 *
 12 * This file is licenced under the GPL.
 13 */
 14
 15#include <linux/err.h>
 16#include <linux/signal.h>
 17
 18#include <linux/of.h>
 19#include <linux/of_address.h>
 20#include <linux/of_irq.h>
 21#include <linux/of_platform.h>
 22
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 23
 24static const struct hc_driver ehci_ppc_of_hc_driver = {
 25	.description		= hcd_name,
 26	.product_desc		= "OF EHCI",
 27	.hcd_priv_size		= sizeof(struct ehci_hcd),
 28
 29	/*
 30	 * generic hardware linkage
 31	 */
 32	.irq			= ehci_irq,
 33	.flags			= HCD_MEMORY | HCD_USB2 | HCD_BH,
 34
 35	/*
 36	 * basic lifecycle operations
 37	 */
 38	.reset			= ehci_setup,
 39	.start			= ehci_run,
 40	.stop			= ehci_stop,
 41	.shutdown		= ehci_shutdown,
 42
 43	/*
 44	 * managing i/o requests and associated device resources
 45	 */
 46	.urb_enqueue		= ehci_urb_enqueue,
 47	.urb_dequeue		= ehci_urb_dequeue,
 48	.endpoint_disable	= ehci_endpoint_disable,
 49	.endpoint_reset		= ehci_endpoint_reset,
 50
 51	/*
 52	 * scheduling support
 53	 */
 54	.get_frame_number	= ehci_get_frame,
 55
 56	/*
 57	 * root hub support
 58	 */
 59	.hub_status_data	= ehci_hub_status_data,
 60	.hub_control		= ehci_hub_control,
 61#ifdef	CONFIG_PM
 62	.bus_suspend		= ehci_bus_suspend,
 63	.bus_resume		= ehci_bus_resume,
 64#endif
 65	.relinquish_port	= ehci_relinquish_port,
 66	.port_handed_over	= ehci_port_handed_over,
 67
 68	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
 69};
 70
 71
 72/*
 73 * 440EPx Errata USBH_3
 74 * Fix: Enable Break Memory Transfer (BMT) in INSNREG3
 75 */
 76#define PPC440EPX_EHCI0_INSREG_BMT	(0x1 << 0)
 77static int
 78ppc44x_enable_bmt(struct device_node *dn)
 79{
 80	__iomem u32 *insreg_virt;
 81
 82	insreg_virt = of_iomap(dn, 1);
 83	if (!insreg_virt)
 84		return  -EINVAL;
 85
 86	out_be32(insreg_virt + 3, PPC440EPX_EHCI0_INSREG_BMT);
 87
 88	iounmap(insreg_virt);
 89	return 0;
 90}
 91
 92
 93static int ehci_hcd_ppc_of_probe(struct platform_device *op)
 94{
 95	struct device_node *dn = op->dev.of_node;
 96	struct usb_hcd *hcd;
 97	struct ehci_hcd	*ehci = NULL;
 98	struct resource res;
 99	int irq;
100	int rv;
101
102	struct device_node *np;
103
104	if (usb_disabled())
105		return -ENODEV;
106
107	dev_dbg(&op->dev, "initializing PPC-OF USB Controller\n");
108
109	rv = of_address_to_resource(dn, 0, &res);
110	if (rv)
111		return rv;
112
113	hcd = usb_create_hcd(&ehci_ppc_of_hc_driver, &op->dev, "PPC-OF USB");
114	if (!hcd)
115		return -ENOMEM;
116
117	hcd->rsrc_start = res.start;
118	hcd->rsrc_len = resource_size(&res);
119
 
 
 
 
 
 
120	irq = irq_of_parse_and_map(dn, 0);
121	if (irq == NO_IRQ) {
122		dev_err(&op->dev, "%s: irq_of_parse_and_map failed\n",
123			__FILE__);
124		rv = -EBUSY;
125		goto err_irq;
126	}
127
128	hcd->regs = devm_ioremap_resource(&op->dev, &res);
129	if (IS_ERR(hcd->regs)) {
130		rv = PTR_ERR(hcd->regs);
 
131		goto err_ioremap;
132	}
133
134	ehci = hcd_to_ehci(hcd);
135	np = of_find_compatible_node(NULL, NULL, "ibm,usb-ohci-440epx");
136	if (np != NULL) {
137		/* claim we really affected by usb23 erratum */
138		if (!of_address_to_resource(np, 0, &res))
139			ehci->ohci_hcctrl_reg =
140				devm_ioremap(&op->dev,
141					     res.start + OHCI_HCCTRL_OFFSET,
142					     OHCI_HCCTRL_LEN);
143		else
144			pr_debug("%s: no ohci offset in fdt\n", __FILE__);
145		if (!ehci->ohci_hcctrl_reg) {
146			pr_debug("%s: ioremap for ohci hcctrl failed\n", __FILE__);
147		} else {
148			ehci->has_amcc_usb23 = 1;
149		}
150	}
151
152	if (of_get_property(dn, "big-endian", NULL)) {
153		ehci->big_endian_mmio = 1;
154		ehci->big_endian_desc = 1;
155	}
156	if (of_get_property(dn, "big-endian-regs", NULL))
157		ehci->big_endian_mmio = 1;
158	if (of_get_property(dn, "big-endian-desc", NULL))
159		ehci->big_endian_desc = 1;
160
161	ehci->caps = hcd->regs;
 
 
 
 
 
162
163	if (of_device_is_compatible(dn, "ibm,usb-ehci-440epx")) {
164		rv = ppc44x_enable_bmt(dn);
165		ehci_dbg(ehci, "Break Memory Transfer (BMT) is %senabled!\n",
166				rv ? "NOT ": "");
167	}
168
169	rv = usb_add_hcd(hcd, irq, 0);
170	if (rv)
171		goto err_ioremap;
172
173	device_wakeup_enable(hcd->self.controller);
174	return 0;
175
 
 
 
 
176err_ioremap:
177	irq_dispose_mapping(irq);
178err_irq:
 
 
179	usb_put_hcd(hcd);
180
181	return rv;
182}
183
184
185static int ehci_hcd_ppc_of_remove(struct platform_device *op)
186{
187	struct usb_hcd *hcd = platform_get_drvdata(op);
188	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
189
190	struct device_node *np;
191	struct resource res;
192
 
 
193	dev_dbg(&op->dev, "stopping PPC-OF USB Controller\n");
194
195	usb_remove_hcd(hcd);
196
 
197	irq_dispose_mapping(hcd->irq);
 
198
199	/* use request_mem_region to test if the ohci driver is loaded.  if so
200	 * ensure the ohci core is operational.
201	 */
202	if (ehci->has_amcc_usb23) {
203		np = of_find_compatible_node(NULL, NULL, "ibm,usb-ohci-440epx");
204		if (np != NULL) {
205			if (!of_address_to_resource(np, 0, &res))
206				if (!request_mem_region(res.start,
207							    0x4, hcd_name))
208					set_ohci_hcfs(ehci, 1);
209				else
210					release_mem_region(res.start, 0x4);
211			else
212				pr_debug("%s: no ohci offset in fdt\n", __FILE__);
213			of_node_put(np);
214		}
 
 
215	}
216	usb_put_hcd(hcd);
217
218	return 0;
219}
220
221
 
 
 
 
 
 
 
 
 
222static const struct of_device_id ehci_hcd_ppc_of_match[] = {
223	{
224		.compatible = "usb-ehci",
225	},
226	{},
227};
228MODULE_DEVICE_TABLE(of, ehci_hcd_ppc_of_match);
229
230
231static struct platform_driver ehci_hcd_ppc_of_driver = {
232	.probe		= ehci_hcd_ppc_of_probe,
233	.remove		= ehci_hcd_ppc_of_remove,
234	.shutdown	= usb_hcd_platform_shutdown,
235	.driver = {
236		.name = "ppc-of-ehci",
 
237		.of_match_table = ehci_hcd_ppc_of_match,
238	},
239};