Loading...
1/*
2 * Copyright (C) 2001-2004 by David Brownell
3 *
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms of the GNU General Public License as published by the
6 * Free Software Foundation; either version 2 of the License, or (at your
7 * option) any later version.
8 *
9 * This program is distributed in the hope that it will be useful, but
10 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
11 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * for more details.
13 *
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software Foundation,
16 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
17 */
18
19/* this file is part of ehci-hcd.c */
20
21/*-------------------------------------------------------------------------*/
22
23/*
24 * EHCI Root Hub ... the nonsharable stuff
25 *
26 * Registers don't need cpu_to_le32, that happens transparently
27 */
28
29/*-------------------------------------------------------------------------*/
30#include <linux/usb/otg.h>
31
32#define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
33
34#ifdef CONFIG_PM
35
36static int ehci_hub_control(
37 struct usb_hcd *hcd,
38 u16 typeReq,
39 u16 wValue,
40 u16 wIndex,
41 char *buf,
42 u16 wLength
43);
44
45/* After a power loss, ports that were owned by the companion must be
46 * reset so that the companion can still own them.
47 */
48static void ehci_handover_companion_ports(struct ehci_hcd *ehci)
49{
50 u32 __iomem *reg;
51 u32 status;
52 int port;
53 __le32 buf;
54 struct usb_hcd *hcd = ehci_to_hcd(ehci);
55
56 if (!ehci->owned_ports)
57 return;
58
59 /* Give the connections some time to appear */
60 msleep(20);
61
62 port = HCS_N_PORTS(ehci->hcs_params);
63 while (port--) {
64 if (test_bit(port, &ehci->owned_ports)) {
65 reg = &ehci->regs->port_status[port];
66 status = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
67
68 /* Port already owned by companion? */
69 if (status & PORT_OWNER)
70 clear_bit(port, &ehci->owned_ports);
71 else if (test_bit(port, &ehci->companion_ports))
72 ehci_writel(ehci, status & ~PORT_PE, reg);
73 else
74 ehci_hub_control(hcd, SetPortFeature,
75 USB_PORT_FEAT_RESET, port + 1,
76 NULL, 0);
77 }
78 }
79
80 if (!ehci->owned_ports)
81 return;
82 msleep(90); /* Wait for resets to complete */
83
84 port = HCS_N_PORTS(ehci->hcs_params);
85 while (port--) {
86 if (test_bit(port, &ehci->owned_ports)) {
87 ehci_hub_control(hcd, GetPortStatus,
88 0, port + 1,
89 (char *) &buf, sizeof(buf));
90
91 /* The companion should now own the port,
92 * but if something went wrong the port must not
93 * remain enabled.
94 */
95 reg = &ehci->regs->port_status[port];
96 status = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
97 if (status & PORT_OWNER)
98 ehci_writel(ehci, status | PORT_CSC, reg);
99 else {
100 ehci_dbg(ehci, "failed handover port %d: %x\n",
101 port + 1, status);
102 ehci_writel(ehci, status & ~PORT_PE, reg);
103 }
104 }
105 }
106
107 ehci->owned_ports = 0;
108}
109
110static int ehci_port_change(struct ehci_hcd *ehci)
111{
112 int i = HCS_N_PORTS(ehci->hcs_params);
113
114 /* First check if the controller indicates a change event */
115
116 if (ehci_readl(ehci, &ehci->regs->status) & STS_PCD)
117 return 1;
118
119 /*
120 * Not all controllers appear to update this while going from D3 to D0,
121 * so check the individual port status registers as well
122 */
123
124 while (i--)
125 if (ehci_readl(ehci, &ehci->regs->port_status[i]) & PORT_CSC)
126 return 1;
127
128 return 0;
129}
130
131static __maybe_unused void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
132 bool suspending, bool do_wakeup)
133{
134 int port;
135 u32 temp;
136 unsigned long flags;
137
138 /* If remote wakeup is enabled for the root hub but disabled
139 * for the controller, we must adjust all the port wakeup flags
140 * when the controller is suspended or resumed. In all other
141 * cases they don't need to be changed.
142 */
143 if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup || do_wakeup)
144 return;
145
146 spin_lock_irqsave(&ehci->lock, flags);
147
148 /* clear phy low-power mode before changing wakeup flags */
149 if (ehci->has_hostpc) {
150 port = HCS_N_PORTS(ehci->hcs_params);
151 while (port--) {
152 u32 __iomem *hostpc_reg;
153
154 hostpc_reg = (u32 __iomem *)((u8 *) ehci->regs
155 + HOSTPC0 + 4 * port);
156 temp = ehci_readl(ehci, hostpc_reg);
157 ehci_writel(ehci, temp & ~HOSTPC_PHCD, hostpc_reg);
158 }
159 spin_unlock_irqrestore(&ehci->lock, flags);
160 msleep(5);
161 spin_lock_irqsave(&ehci->lock, flags);
162 }
163
164 port = HCS_N_PORTS(ehci->hcs_params);
165 while (port--) {
166 u32 __iomem *reg = &ehci->regs->port_status[port];
167 u32 t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
168 u32 t2 = t1 & ~PORT_WAKE_BITS;
169
170 /* If we are suspending the controller, clear the flags.
171 * If we are resuming the controller, set the wakeup flags.
172 */
173 if (!suspending) {
174 if (t1 & PORT_CONNECT)
175 t2 |= PORT_WKOC_E | PORT_WKDISC_E;
176 else
177 t2 |= PORT_WKOC_E | PORT_WKCONN_E;
178 }
179 ehci_vdbg(ehci, "port %d, %08x -> %08x\n",
180 port + 1, t1, t2);
181 ehci_writel(ehci, t2, reg);
182 }
183
184 /* enter phy low-power mode again */
185 if (ehci->has_hostpc) {
186 port = HCS_N_PORTS(ehci->hcs_params);
187 while (port--) {
188 u32 __iomem *hostpc_reg;
189
190 hostpc_reg = (u32 __iomem *)((u8 *) ehci->regs
191 + HOSTPC0 + 4 * port);
192 temp = ehci_readl(ehci, hostpc_reg);
193 ehci_writel(ehci, temp | HOSTPC_PHCD, hostpc_reg);
194 }
195 }
196
197 /* Does the root hub have a port wakeup pending? */
198 if (!suspending && ehci_port_change(ehci))
199 usb_hcd_resume_root_hub(ehci_to_hcd(ehci));
200
201 spin_unlock_irqrestore(&ehci->lock, flags);
202}
203
204static int ehci_bus_suspend (struct usb_hcd *hcd)
205{
206 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
207 int port;
208 int mask;
209 int changed;
210
211 ehci_dbg(ehci, "suspend root hub\n");
212
213 if (time_before (jiffies, ehci->next_statechange))
214 msleep(5);
215 del_timer_sync(&ehci->watchdog);
216 del_timer_sync(&ehci->iaa_watchdog);
217
218 spin_lock_irq (&ehci->lock);
219
220 /* Once the controller is stopped, port resumes that are already
221 * in progress won't complete. Hence if remote wakeup is enabled
222 * for the root hub and any ports are in the middle of a resume or
223 * remote wakeup, we must fail the suspend.
224 */
225 if (hcd->self.root_hub->do_remote_wakeup) {
226 port = HCS_N_PORTS(ehci->hcs_params);
227 while (port--) {
228 if (ehci->reset_done[port] != 0) {
229 spin_unlock_irq(&ehci->lock);
230 ehci_dbg(ehci, "suspend failed because "
231 "port %d is resuming\n",
232 port + 1);
233 return -EBUSY;
234 }
235 }
236 }
237
238 /* stop schedules, clean any completed work */
239 if (HC_IS_RUNNING(hcd->state)) {
240 ehci_quiesce (ehci);
241 hcd->state = HC_STATE_QUIESCING;
242 }
243 ehci->command = ehci_readl(ehci, &ehci->regs->command);
244 ehci_work(ehci);
245
246 /* Unlike other USB host controller types, EHCI doesn't have
247 * any notion of "global" or bus-wide suspend. The driver has
248 * to manually suspend all the active unsuspended ports, and
249 * then manually resume them in the bus_resume() routine.
250 */
251 ehci->bus_suspended = 0;
252 ehci->owned_ports = 0;
253 changed = 0;
254 port = HCS_N_PORTS(ehci->hcs_params);
255 while (port--) {
256 u32 __iomem *reg = &ehci->regs->port_status [port];
257 u32 t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
258 u32 t2 = t1 & ~PORT_WAKE_BITS;
259
260 /* keep track of which ports we suspend */
261 if (t1 & PORT_OWNER)
262 set_bit(port, &ehci->owned_ports);
263 else if ((t1 & PORT_PE) && !(t1 & PORT_SUSPEND)) {
264 t2 |= PORT_SUSPEND;
265 set_bit(port, &ehci->bus_suspended);
266 }
267
268 /* enable remote wakeup on all ports, if told to do so */
269 if (hcd->self.root_hub->do_remote_wakeup) {
270 /* only enable appropriate wake bits, otherwise the
271 * hardware can not go phy low power mode. If a race
272 * condition happens here(connection change during bits
273 * set), the port change detection will finally fix it.
274 */
275 if (t1 & PORT_CONNECT)
276 t2 |= PORT_WKOC_E | PORT_WKDISC_E;
277 else
278 t2 |= PORT_WKOC_E | PORT_WKCONN_E;
279 }
280
281 if (t1 != t2) {
282 ehci_vdbg (ehci, "port %d, %08x -> %08x\n",
283 port + 1, t1, t2);
284 ehci_writel(ehci, t2, reg);
285 changed = 1;
286 }
287 }
288
289 if (changed && ehci->has_hostpc) {
290 spin_unlock_irq(&ehci->lock);
291 msleep(5); /* 5 ms for HCD to enter low-power mode */
292 spin_lock_irq(&ehci->lock);
293
294 port = HCS_N_PORTS(ehci->hcs_params);
295 while (port--) {
296 u32 __iomem *hostpc_reg;
297 u32 t3;
298
299 hostpc_reg = (u32 __iomem *)((u8 *) ehci->regs
300 + HOSTPC0 + 4 * port);
301 t3 = ehci_readl(ehci, hostpc_reg);
302 ehci_writel(ehci, t3 | HOSTPC_PHCD, hostpc_reg);
303 t3 = ehci_readl(ehci, hostpc_reg);
304 ehci_dbg(ehci, "Port %d phy low-power mode %s\n",
305 port, (t3 & HOSTPC_PHCD) ?
306 "succeeded" : "failed");
307 }
308 }
309
310 /* Apparently some devices need a >= 1-uframe delay here */
311 if (ehci->bus_suspended)
312 udelay(150);
313
314 /* turn off now-idle HC */
315 ehci_halt (ehci);
316 hcd->state = HC_STATE_SUSPENDED;
317
318 if (ehci->reclaim)
319 end_unlink_async(ehci);
320
321 /* allow remote wakeup */
322 mask = INTR_MASK;
323 if (!hcd->self.root_hub->do_remote_wakeup)
324 mask &= ~STS_PCD;
325 ehci_writel(ehci, mask, &ehci->regs->intr_enable);
326 ehci_readl(ehci, &ehci->regs->intr_enable);
327
328 ehci->next_statechange = jiffies + msecs_to_jiffies(10);
329 spin_unlock_irq (&ehci->lock);
330
331 /* ehci_work() may have re-enabled the watchdog timer, which we do not
332 * want, and so we must delete any pending watchdog timer events.
333 */
334 del_timer_sync(&ehci->watchdog);
335 return 0;
336}
337
338
339/* caller has locked the root hub, and should reset/reinit on error */
340static int ehci_bus_resume (struct usb_hcd *hcd)
341{
342 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
343 u32 temp;
344 u32 power_okay;
345 int i;
346 unsigned long resume_needed = 0;
347
348 if (time_before (jiffies, ehci->next_statechange))
349 msleep(5);
350 spin_lock_irq (&ehci->lock);
351 if (!HCD_HW_ACCESSIBLE(hcd)) {
352 spin_unlock_irq(&ehci->lock);
353 return -ESHUTDOWN;
354 }
355
356 if (unlikely(ehci->debug)) {
357 if (!dbgp_reset_prep())
358 ehci->debug = NULL;
359 else
360 dbgp_external_startup();
361 }
362
363 /* Ideally and we've got a real resume here, and no port's power
364 * was lost. (For PCI, that means Vaux was maintained.) But we
365 * could instead be restoring a swsusp snapshot -- so that BIOS was
366 * the last user of the controller, not reset/pm hardware keeping
367 * state we gave to it.
368 */
369 power_okay = ehci_readl(ehci, &ehci->regs->intr_enable);
370 ehci_dbg(ehci, "resume root hub%s\n",
371 power_okay ? "" : " after power loss");
372
373 /* at least some APM implementations will try to deliver
374 * IRQs right away, so delay them until we're ready.
375 */
376 ehci_writel(ehci, 0, &ehci->regs->intr_enable);
377
378 /* re-init operational registers */
379 ehci_writel(ehci, 0, &ehci->regs->segment);
380 ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
381 ehci_writel(ehci, (u32) ehci->async->qh_dma, &ehci->regs->async_next);
382
383 /* restore CMD_RUN, framelist size, and irq threshold */
384 ehci_writel(ehci, ehci->command, &ehci->regs->command);
385
386 /* Some controller/firmware combinations need a delay during which
387 * they set up the port statuses. See Bugzilla #8190. */
388 spin_unlock_irq(&ehci->lock);
389 msleep(8);
390 spin_lock_irq(&ehci->lock);
391
392 /* clear phy low-power mode before resume */
393 if (ehci->bus_suspended && ehci->has_hostpc) {
394 i = HCS_N_PORTS(ehci->hcs_params);
395 while (i--) {
396 if (test_bit(i, &ehci->bus_suspended)) {
397 u32 __iomem *hostpc_reg;
398
399 hostpc_reg = (u32 __iomem *)((u8 *) ehci->regs
400 + HOSTPC0 + 4 * i);
401 temp = ehci_readl(ehci, hostpc_reg);
402 ehci_writel(ehci, temp & ~HOSTPC_PHCD,
403 hostpc_reg);
404 }
405 }
406 spin_unlock_irq(&ehci->lock);
407 msleep(5);
408 spin_lock_irq(&ehci->lock);
409 }
410
411 /* manually resume the ports we suspended during bus_suspend() */
412 i = HCS_N_PORTS (ehci->hcs_params);
413 while (i--) {
414 temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
415 temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
416 if (test_bit(i, &ehci->bus_suspended) &&
417 (temp & PORT_SUSPEND)) {
418 temp |= PORT_RESUME;
419 set_bit(i, &resume_needed);
420 }
421 ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
422 }
423
424 /* msleep for 20ms only if code is trying to resume port */
425 if (resume_needed) {
426 spin_unlock_irq(&ehci->lock);
427 msleep(20);
428 spin_lock_irq(&ehci->lock);
429 }
430
431 i = HCS_N_PORTS (ehci->hcs_params);
432 while (i--) {
433 temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
434 if (test_bit(i, &resume_needed)) {
435 temp &= ~(PORT_RWC_BITS | PORT_RESUME);
436 ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
437 ehci_vdbg (ehci, "resumed port %d\n", i + 1);
438 }
439 }
440 (void) ehci_readl(ehci, &ehci->regs->command);
441
442 /* maybe re-activate the schedule(s) */
443 temp = 0;
444 if (ehci->async->qh_next.qh)
445 temp |= CMD_ASE;
446 if (ehci->periodic_sched)
447 temp |= CMD_PSE;
448 if (temp) {
449 ehci->command |= temp;
450 ehci_writel(ehci, ehci->command, &ehci->regs->command);
451 }
452
453 ehci->next_statechange = jiffies + msecs_to_jiffies(5);
454 hcd->state = HC_STATE_RUNNING;
455
456 /* Now we can safely re-enable irqs */
457 ehci_writel(ehci, INTR_MASK, &ehci->regs->intr_enable);
458
459 spin_unlock_irq (&ehci->lock);
460 ehci_handover_companion_ports(ehci);
461 return 0;
462}
463
464#else
465
466#define ehci_bus_suspend NULL
467#define ehci_bus_resume NULL
468
469#endif /* CONFIG_PM */
470
471/*-------------------------------------------------------------------------*/
472
473/*
474 * Sets the owner of a port
475 */
476static void set_owner(struct ehci_hcd *ehci, int portnum, int new_owner)
477{
478 u32 __iomem *status_reg;
479 u32 port_status;
480 int try;
481
482 status_reg = &ehci->regs->port_status[portnum];
483
484 /*
485 * The controller won't set the OWNER bit if the port is
486 * enabled, so this loop will sometimes require at least two
487 * iterations: one to disable the port and one to set OWNER.
488 */
489 for (try = 4; try > 0; --try) {
490 spin_lock_irq(&ehci->lock);
491 port_status = ehci_readl(ehci, status_reg);
492 if ((port_status & PORT_OWNER) == new_owner
493 || (port_status & (PORT_OWNER | PORT_CONNECT))
494 == 0)
495 try = 0;
496 else {
497 port_status ^= PORT_OWNER;
498 port_status &= ~(PORT_PE | PORT_RWC_BITS);
499 ehci_writel(ehci, port_status, status_reg);
500 }
501 spin_unlock_irq(&ehci->lock);
502 if (try > 1)
503 msleep(5);
504 }
505}
506
507/*-------------------------------------------------------------------------*/
508
509static int check_reset_complete (
510 struct ehci_hcd *ehci,
511 int index,
512 u32 __iomem *status_reg,
513 int port_status
514) {
515 if (!(port_status & PORT_CONNECT))
516 return port_status;
517
518 /* if reset finished and it's still not enabled -- handoff */
519 if (!(port_status & PORT_PE)) {
520
521 /* with integrated TT, there's nobody to hand it to! */
522 if (ehci_is_TDI(ehci)) {
523 ehci_dbg (ehci,
524 "Failed to enable port %d on root hub TT\n",
525 index+1);
526 return port_status;
527 }
528
529 ehci_dbg (ehci, "port %d full speed --> companion\n",
530 index + 1);
531
532 // what happens if HCS_N_CC(params) == 0 ?
533 port_status |= PORT_OWNER;
534 port_status &= ~PORT_RWC_BITS;
535 ehci_writel(ehci, port_status, status_reg);
536
537 /* ensure 440EPX ohci controller state is operational */
538 if (ehci->has_amcc_usb23)
539 set_ohci_hcfs(ehci, 1);
540 } else {
541 ehci_dbg (ehci, "port %d high speed\n", index + 1);
542 /* ensure 440EPx ohci controller state is suspended */
543 if (ehci->has_amcc_usb23)
544 set_ohci_hcfs(ehci, 0);
545 }
546
547 return port_status;
548}
549
550/*-------------------------------------------------------------------------*/
551
552
553/* build "status change" packet (one or two bytes) from HC registers */
554
555static int
556ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
557{
558 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
559 u32 temp, status = 0;
560 u32 mask;
561 int ports, i, retval = 1;
562 unsigned long flags;
563 u32 ppcd = 0;
564
565 /* if !USB_SUSPEND, root hub timers won't get shut down ... */
566 if (!HC_IS_RUNNING(hcd->state))
567 return 0;
568
569 /* init status to no-changes */
570 buf [0] = 0;
571 ports = HCS_N_PORTS (ehci->hcs_params);
572 if (ports > 7) {
573 buf [1] = 0;
574 retval++;
575 }
576
577 /* Some boards (mostly VIA?) report bogus overcurrent indications,
578 * causing massive log spam unless we completely ignore them. It
579 * may be relevant that VIA VT8235 controllers, where PORT_POWER is
580 * always set, seem to clear PORT_OCC and PORT_CSC when writing to
581 * PORT_POWER; that's surprising, but maybe within-spec.
582 */
583 if (!ignore_oc)
584 mask = PORT_CSC | PORT_PEC | PORT_OCC;
585 else
586 mask = PORT_CSC | PORT_PEC;
587 // PORT_RESUME from hardware ~= PORT_STAT_C_SUSPEND
588
589 /* no hub change reports (bit 0) for now (power, ...) */
590
591 /* port N changes (bit N)? */
592 spin_lock_irqsave (&ehci->lock, flags);
593
594 /* get per-port change detect bits */
595 if (ehci->has_ppcd)
596 ppcd = ehci_readl(ehci, &ehci->regs->status) >> 16;
597
598 for (i = 0; i < ports; i++) {
599 /* leverage per-port change bits feature */
600 if (ehci->has_ppcd && !(ppcd & (1 << i)))
601 continue;
602 temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
603
604 /*
605 * Return status information even for ports with OWNER set.
606 * Otherwise khubd wouldn't see the disconnect event when a
607 * high-speed device is switched over to the companion
608 * controller by the user.
609 */
610
611 if ((temp & mask) != 0 || test_bit(i, &ehci->port_c_suspend)
612 || (ehci->reset_done[i] && time_after_eq(
613 jiffies, ehci->reset_done[i]))) {
614 if (i < 7)
615 buf [0] |= 1 << (i + 1);
616 else
617 buf [1] |= 1 << (i - 7);
618 status = STS_PCD;
619 }
620 }
621 /* FIXME autosuspend idle root hubs */
622 spin_unlock_irqrestore (&ehci->lock, flags);
623 return status ? retval : 0;
624}
625
626/*-------------------------------------------------------------------------*/
627
628static void
629ehci_hub_descriptor (
630 struct ehci_hcd *ehci,
631 struct usb_hub_descriptor *desc
632) {
633 int ports = HCS_N_PORTS (ehci->hcs_params);
634 u16 temp;
635
636 desc->bDescriptorType = 0x29;
637 desc->bPwrOn2PwrGood = 10; /* ehci 1.0, 2.3.9 says 20ms max */
638 desc->bHubContrCurrent = 0;
639
640 desc->bNbrPorts = ports;
641 temp = 1 + (ports / 8);
642 desc->bDescLength = 7 + 2 * temp;
643
644 /* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */
645 memset(&desc->u.hs.DeviceRemovable[0], 0, temp);
646 memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp);
647
648 temp = 0x0008; /* per-port overcurrent reporting */
649 if (HCS_PPC (ehci->hcs_params))
650 temp |= 0x0001; /* per-port power control */
651 else
652 temp |= 0x0002; /* no power switching */
653#if 0
654// re-enable when we support USB_PORT_FEAT_INDICATOR below.
655 if (HCS_INDICATOR (ehci->hcs_params))
656 temp |= 0x0080; /* per-port indicators (LEDs) */
657#endif
658 desc->wHubCharacteristics = cpu_to_le16(temp);
659}
660
661/*-------------------------------------------------------------------------*/
662
663static int ehci_hub_control (
664 struct usb_hcd *hcd,
665 u16 typeReq,
666 u16 wValue,
667 u16 wIndex,
668 char *buf,
669 u16 wLength
670) {
671 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
672 int ports = HCS_N_PORTS (ehci->hcs_params);
673 u32 __iomem *status_reg = &ehci->regs->port_status[
674 (wIndex & 0xff) - 1];
675 u32 __iomem *hostpc_reg = NULL;
676 u32 temp, temp1, status;
677 unsigned long flags;
678 int retval = 0;
679 unsigned selector;
680
681 /*
682 * FIXME: support SetPortFeatures USB_PORT_FEAT_INDICATOR.
683 * HCS_INDICATOR may say we can change LEDs to off/amber/green.
684 * (track current state ourselves) ... blink for diagnostics,
685 * power, "this is the one", etc. EHCI spec supports this.
686 */
687
688 if (ehci->has_hostpc)
689 hostpc_reg = (u32 __iomem *)((u8 *)ehci->regs
690 + HOSTPC0 + 4 * ((wIndex & 0xff) - 1));
691 spin_lock_irqsave (&ehci->lock, flags);
692 switch (typeReq) {
693 case ClearHubFeature:
694 switch (wValue) {
695 case C_HUB_LOCAL_POWER:
696 case C_HUB_OVER_CURRENT:
697 /* no hub-wide feature/status flags */
698 break;
699 default:
700 goto error;
701 }
702 break;
703 case ClearPortFeature:
704 if (!wIndex || wIndex > ports)
705 goto error;
706 wIndex--;
707 temp = ehci_readl(ehci, status_reg);
708
709 /*
710 * Even if OWNER is set, so the port is owned by the
711 * companion controller, khubd needs to be able to clear
712 * the port-change status bits (especially
713 * USB_PORT_STAT_C_CONNECTION).
714 */
715
716 switch (wValue) {
717 case USB_PORT_FEAT_ENABLE:
718 ehci_writel(ehci, temp & ~PORT_PE, status_reg);
719 break;
720 case USB_PORT_FEAT_C_ENABLE:
721 ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_PEC,
722 status_reg);
723 break;
724 case USB_PORT_FEAT_SUSPEND:
725 if (temp & PORT_RESET)
726 goto error;
727 if (ehci->no_selective_suspend)
728 break;
729#ifdef CONFIG_USB_OTG
730 if ((hcd->self.otg_port == (wIndex + 1))
731 && hcd->self.b_hnp_enable) {
732 otg_start_hnp(ehci->transceiver);
733 break;
734 }
735#endif
736 if (!(temp & PORT_SUSPEND))
737 break;
738 if ((temp & PORT_PE) == 0)
739 goto error;
740
741 /* clear phy low-power mode before resume */
742 if (hostpc_reg) {
743 temp1 = ehci_readl(ehci, hostpc_reg);
744 ehci_writel(ehci, temp1 & ~HOSTPC_PHCD,
745 hostpc_reg);
746 spin_unlock_irqrestore(&ehci->lock, flags);
747 msleep(5);/* wait to leave low-power mode */
748 spin_lock_irqsave(&ehci->lock, flags);
749 }
750 /* resume signaling for 20 msec */
751 temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
752 ehci_writel(ehci, temp | PORT_RESUME, status_reg);
753 ehci->reset_done[wIndex] = jiffies
754 + msecs_to_jiffies(20);
755 break;
756 case USB_PORT_FEAT_C_SUSPEND:
757 clear_bit(wIndex, &ehci->port_c_suspend);
758 break;
759 case USB_PORT_FEAT_POWER:
760 if (HCS_PPC (ehci->hcs_params))
761 ehci_writel(ehci,
762 temp & ~(PORT_RWC_BITS | PORT_POWER),
763 status_reg);
764 break;
765 case USB_PORT_FEAT_C_CONNECTION:
766 if (ehci->has_lpm) {
767 /* clear PORTSC bits on disconnect */
768 temp &= ~PORT_LPM;
769 temp &= ~PORT_DEV_ADDR;
770 }
771 ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_CSC,
772 status_reg);
773 break;
774 case USB_PORT_FEAT_C_OVER_CURRENT:
775 ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_OCC,
776 status_reg);
777 break;
778 case USB_PORT_FEAT_C_RESET:
779 /* GetPortStatus clears reset */
780 break;
781 default:
782 goto error;
783 }
784 ehci_readl(ehci, &ehci->regs->command); /* unblock posted write */
785 break;
786 case GetHubDescriptor:
787 ehci_hub_descriptor (ehci, (struct usb_hub_descriptor *)
788 buf);
789 break;
790 case GetHubStatus:
791 /* no hub-wide feature/status flags */
792 memset (buf, 0, 4);
793 //cpu_to_le32s ((u32 *) buf);
794 break;
795 case GetPortStatus:
796 if (!wIndex || wIndex > ports)
797 goto error;
798 wIndex--;
799 status = 0;
800 temp = ehci_readl(ehci, status_reg);
801
802 // wPortChange bits
803 if (temp & PORT_CSC)
804 status |= USB_PORT_STAT_C_CONNECTION << 16;
805 if (temp & PORT_PEC)
806 status |= USB_PORT_STAT_C_ENABLE << 16;
807
808 if ((temp & PORT_OCC) && !ignore_oc){
809 status |= USB_PORT_STAT_C_OVERCURRENT << 16;
810
811 /*
812 * Hubs should disable port power on over-current.
813 * However, not all EHCI implementations do this
814 * automatically, even if they _do_ support per-port
815 * power switching; they're allowed to just limit the
816 * current. khubd will turn the power back on.
817 */
818 if ((temp & PORT_OC) && HCS_PPC(ehci->hcs_params)) {
819 ehci_writel(ehci,
820 temp & ~(PORT_RWC_BITS | PORT_POWER),
821 status_reg);
822 temp = ehci_readl(ehci, status_reg);
823 }
824 }
825
826 /* whoever resumes must GetPortStatus to complete it!! */
827 if (temp & PORT_RESUME) {
828
829 /* Remote Wakeup received? */
830 if (!ehci->reset_done[wIndex]) {
831 /* resume signaling for 20 msec */
832 ehci->reset_done[wIndex] = jiffies
833 + msecs_to_jiffies(20);
834 /* check the port again */
835 mod_timer(&ehci_to_hcd(ehci)->rh_timer,
836 ehci->reset_done[wIndex]);
837 }
838
839 /* resume completed? */
840 else if (time_after_eq(jiffies,
841 ehci->reset_done[wIndex])) {
842 clear_bit(wIndex, &ehci->suspended_ports);
843 set_bit(wIndex, &ehci->port_c_suspend);
844 ehci->reset_done[wIndex] = 0;
845
846 /* stop resume signaling */
847 temp = ehci_readl(ehci, status_reg);
848 ehci_writel(ehci,
849 temp & ~(PORT_RWC_BITS | PORT_RESUME),
850 status_reg);
851 retval = handshake(ehci, status_reg,
852 PORT_RESUME, 0, 2000 /* 2msec */);
853 if (retval != 0) {
854 ehci_err(ehci,
855 "port %d resume error %d\n",
856 wIndex + 1, retval);
857 goto error;
858 }
859 temp &= ~(PORT_SUSPEND|PORT_RESUME|(3<<10));
860 }
861 }
862
863 /* whoever resets must GetPortStatus to complete it!! */
864 if ((temp & PORT_RESET)
865 && time_after_eq(jiffies,
866 ehci->reset_done[wIndex])) {
867 status |= USB_PORT_STAT_C_RESET << 16;
868 ehci->reset_done [wIndex] = 0;
869
870 /* force reset to complete */
871 ehci_writel(ehci, temp & ~(PORT_RWC_BITS | PORT_RESET),
872 status_reg);
873 /* REVISIT: some hardware needs 550+ usec to clear
874 * this bit; seems too long to spin routinely...
875 */
876 retval = handshake(ehci, status_reg,
877 PORT_RESET, 0, 1000);
878 if (retval != 0) {
879 ehci_err (ehci, "port %d reset error %d\n",
880 wIndex + 1, retval);
881 goto error;
882 }
883
884 /* see what we found out */
885 temp = check_reset_complete (ehci, wIndex, status_reg,
886 ehci_readl(ehci, status_reg));
887 }
888
889 if (!(temp & (PORT_RESUME|PORT_RESET)))
890 ehci->reset_done[wIndex] = 0;
891
892 /* transfer dedicated ports to the companion hc */
893 if ((temp & PORT_CONNECT) &&
894 test_bit(wIndex, &ehci->companion_ports)) {
895 temp &= ~PORT_RWC_BITS;
896 temp |= PORT_OWNER;
897 ehci_writel(ehci, temp, status_reg);
898 ehci_dbg(ehci, "port %d --> companion\n", wIndex + 1);
899 temp = ehci_readl(ehci, status_reg);
900 }
901
902 /*
903 * Even if OWNER is set, there's no harm letting khubd
904 * see the wPortStatus values (they should all be 0 except
905 * for PORT_POWER anyway).
906 */
907
908 if (temp & PORT_CONNECT) {
909 status |= USB_PORT_STAT_CONNECTION;
910 // status may be from integrated TT
911 if (ehci->has_hostpc) {
912 temp1 = ehci_readl(ehci, hostpc_reg);
913 status |= ehci_port_speed(ehci, temp1);
914 } else
915 status |= ehci_port_speed(ehci, temp);
916 }
917 if (temp & PORT_PE)
918 status |= USB_PORT_STAT_ENABLE;
919
920 /* maybe the port was unsuspended without our knowledge */
921 if (temp & (PORT_SUSPEND|PORT_RESUME)) {
922 status |= USB_PORT_STAT_SUSPEND;
923 } else if (test_bit(wIndex, &ehci->suspended_ports)) {
924 clear_bit(wIndex, &ehci->suspended_ports);
925 ehci->reset_done[wIndex] = 0;
926 if (temp & PORT_PE)
927 set_bit(wIndex, &ehci->port_c_suspend);
928 }
929
930 if (temp & PORT_OC)
931 status |= USB_PORT_STAT_OVERCURRENT;
932 if (temp & PORT_RESET)
933 status |= USB_PORT_STAT_RESET;
934 if (temp & PORT_POWER)
935 status |= USB_PORT_STAT_POWER;
936 if (test_bit(wIndex, &ehci->port_c_suspend))
937 status |= USB_PORT_STAT_C_SUSPEND << 16;
938
939#ifndef VERBOSE_DEBUG
940 if (status & ~0xffff) /* only if wPortChange is interesting */
941#endif
942 dbg_port (ehci, "GetStatus", wIndex + 1, temp);
943 put_unaligned_le32(status, buf);
944 break;
945 case SetHubFeature:
946 switch (wValue) {
947 case C_HUB_LOCAL_POWER:
948 case C_HUB_OVER_CURRENT:
949 /* no hub-wide feature/status flags */
950 break;
951 default:
952 goto error;
953 }
954 break;
955 case SetPortFeature:
956 selector = wIndex >> 8;
957 wIndex &= 0xff;
958 if (unlikely(ehci->debug)) {
959 /* If the debug port is active any port
960 * feature requests should get denied */
961 if (wIndex == HCS_DEBUG_PORT(ehci->hcs_params) &&
962 (readl(&ehci->debug->control) & DBGP_ENABLED)) {
963 retval = -ENODEV;
964 goto error_exit;
965 }
966 }
967 if (!wIndex || wIndex > ports)
968 goto error;
969 wIndex--;
970 temp = ehci_readl(ehci, status_reg);
971 if (temp & PORT_OWNER)
972 break;
973
974 temp &= ~PORT_RWC_BITS;
975 switch (wValue) {
976 case USB_PORT_FEAT_SUSPEND:
977 if (ehci->no_selective_suspend)
978 break;
979 if ((temp & PORT_PE) == 0
980 || (temp & PORT_RESET) != 0)
981 goto error;
982
983 /* After above check the port must be connected.
984 * Set appropriate bit thus could put phy into low power
985 * mode if we have hostpc feature
986 */
987 temp &= ~PORT_WKCONN_E;
988 temp |= PORT_WKDISC_E | PORT_WKOC_E;
989 ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
990 if (hostpc_reg) {
991 spin_unlock_irqrestore(&ehci->lock, flags);
992 msleep(5);/* 5ms for HCD enter low pwr mode */
993 spin_lock_irqsave(&ehci->lock, flags);
994 temp1 = ehci_readl(ehci, hostpc_reg);
995 ehci_writel(ehci, temp1 | HOSTPC_PHCD,
996 hostpc_reg);
997 temp1 = ehci_readl(ehci, hostpc_reg);
998 ehci_dbg(ehci, "Port%d phy low pwr mode %s\n",
999 wIndex, (temp1 & HOSTPC_PHCD) ?
1000 "succeeded" : "failed");
1001 }
1002 set_bit(wIndex, &ehci->suspended_ports);
1003 break;
1004 case USB_PORT_FEAT_POWER:
1005 if (HCS_PPC (ehci->hcs_params))
1006 ehci_writel(ehci, temp | PORT_POWER,
1007 status_reg);
1008 break;
1009 case USB_PORT_FEAT_RESET:
1010 if (temp & PORT_RESUME)
1011 goto error;
1012 /* line status bits may report this as low speed,
1013 * which can be fine if this root hub has a
1014 * transaction translator built in.
1015 */
1016 if ((temp & (PORT_PE|PORT_CONNECT)) == PORT_CONNECT
1017 && !ehci_is_TDI(ehci)
1018 && PORT_USB11 (temp)) {
1019 ehci_dbg (ehci,
1020 "port %d low speed --> companion\n",
1021 wIndex + 1);
1022 temp |= PORT_OWNER;
1023 } else {
1024 ehci_vdbg (ehci, "port %d reset\n", wIndex + 1);
1025 temp |= PORT_RESET;
1026 temp &= ~PORT_PE;
1027
1028 /*
1029 * caller must wait, then call GetPortStatus
1030 * usb 2.0 spec says 50 ms resets on root
1031 */
1032 ehci->reset_done [wIndex] = jiffies
1033 + msecs_to_jiffies (50);
1034 }
1035 ehci_writel(ehci, temp, status_reg);
1036 break;
1037
1038 /* For downstream facing ports (these): one hub port is put
1039 * into test mode according to USB2 11.24.2.13, then the hub
1040 * must be reset (which for root hub now means rmmod+modprobe,
1041 * or else system reboot). See EHCI 2.3.9 and 4.14 for info
1042 * about the EHCI-specific stuff.
1043 */
1044 case USB_PORT_FEAT_TEST:
1045 if (!selector || selector > 5)
1046 goto error;
1047 ehci_quiesce(ehci);
1048
1049 /* Put all enabled ports into suspend */
1050 while (ports--) {
1051 u32 __iomem *sreg =
1052 &ehci->regs->port_status[ports];
1053
1054 temp = ehci_readl(ehci, sreg) & ~PORT_RWC_BITS;
1055 if (temp & PORT_PE)
1056 ehci_writel(ehci, temp | PORT_SUSPEND,
1057 sreg);
1058 }
1059 ehci_halt(ehci);
1060 temp = ehci_readl(ehci, status_reg);
1061 temp |= selector << 16;
1062 ehci_writel(ehci, temp, status_reg);
1063 break;
1064
1065 default:
1066 goto error;
1067 }
1068 ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
1069 break;
1070
1071 default:
1072error:
1073 /* "stall" on error */
1074 retval = -EPIPE;
1075 }
1076error_exit:
1077 spin_unlock_irqrestore (&ehci->lock, flags);
1078 return retval;
1079}
1080
1081static void ehci_relinquish_port(struct usb_hcd *hcd, int portnum)
1082{
1083 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
1084
1085 if (ehci_is_TDI(ehci))
1086 return;
1087 set_owner(ehci, --portnum, PORT_OWNER);
1088}
1089
1090static int ehci_port_handed_over(struct usb_hcd *hcd, int portnum)
1091{
1092 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
1093 u32 __iomem *reg;
1094
1095 if (ehci_is_TDI(ehci))
1096 return 0;
1097 reg = &ehci->regs->port_status[portnum - 1];
1098 return ehci_readl(ehci, reg) & PORT_OWNER;
1099}
1/*
2 * Copyright (C) 2001-2004 by David Brownell
3 *
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms of the GNU General Public License as published by the
6 * Free Software Foundation; either version 2 of the License, or (at your
7 * option) any later version.
8 *
9 * This program is distributed in the hope that it will be useful, but
10 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
11 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * for more details.
13 *
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software Foundation,
16 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
17 */
18
19/* this file is part of ehci-hcd.c */
20
21/*-------------------------------------------------------------------------*/
22
23/*
24 * EHCI Root Hub ... the nonsharable stuff
25 *
26 * Registers don't need cpu_to_le32, that happens transparently
27 */
28
29/*-------------------------------------------------------------------------*/
30#include <linux/usb/otg.h>
31
32#define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
33
34#ifdef CONFIG_PM
35
36static void unlink_empty_async_suspended(struct ehci_hcd *ehci);
37
38static int persist_enabled_on_companion(struct usb_device *udev, void *unused)
39{
40 return !udev->maxchild && udev->persist_enabled &&
41 udev->bus->root_hub->speed < USB_SPEED_HIGH;
42}
43
44/* After a power loss, ports that were owned by the companion must be
45 * reset so that the companion can still own them.
46 */
47static void ehci_handover_companion_ports(struct ehci_hcd *ehci)
48{
49 u32 __iomem *reg;
50 u32 status;
51 int port;
52 __le32 buf;
53 struct usb_hcd *hcd = ehci_to_hcd(ehci);
54
55 if (!ehci->owned_ports)
56 return;
57
58 /*
59 * USB 1.1 devices are mostly HIDs, which don't need to persist across
60 * suspends. If we ensure that none of our companion's devices have
61 * persist_enabled (by looking through all USB 1.1 buses in the system),
62 * we can skip this and avoid slowing resume down. Devices without
63 * persist will just get reenumerated shortly after resume anyway.
64 */
65 if (!usb_for_each_dev(NULL, persist_enabled_on_companion))
66 return;
67
68 /* Make sure the ports are powered */
69 port = HCS_N_PORTS(ehci->hcs_params);
70 while (port--) {
71 if (test_bit(port, &ehci->owned_ports)) {
72 reg = &ehci->regs->port_status[port];
73 status = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
74 if (!(status & PORT_POWER))
75 ehci_port_power(ehci, port, true);
76 }
77 }
78
79 /* Give the connections some time to appear */
80 msleep(20);
81
82 spin_lock_irq(&ehci->lock);
83 port = HCS_N_PORTS(ehci->hcs_params);
84 while (port--) {
85 if (test_bit(port, &ehci->owned_ports)) {
86 reg = &ehci->regs->port_status[port];
87 status = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
88
89 /* Port already owned by companion? */
90 if (status & PORT_OWNER)
91 clear_bit(port, &ehci->owned_ports);
92 else if (test_bit(port, &ehci->companion_ports))
93 ehci_writel(ehci, status & ~PORT_PE, reg);
94 else {
95 spin_unlock_irq(&ehci->lock);
96 ehci_hub_control(hcd, SetPortFeature,
97 USB_PORT_FEAT_RESET, port + 1,
98 NULL, 0);
99 spin_lock_irq(&ehci->lock);
100 }
101 }
102 }
103 spin_unlock_irq(&ehci->lock);
104
105 if (!ehci->owned_ports)
106 return;
107 msleep(90); /* Wait for resets to complete */
108
109 spin_lock_irq(&ehci->lock);
110 port = HCS_N_PORTS(ehci->hcs_params);
111 while (port--) {
112 if (test_bit(port, &ehci->owned_ports)) {
113 spin_unlock_irq(&ehci->lock);
114 ehci_hub_control(hcd, GetPortStatus,
115 0, port + 1,
116 (char *) &buf, sizeof(buf));
117 spin_lock_irq(&ehci->lock);
118
119 /* The companion should now own the port,
120 * but if something went wrong the port must not
121 * remain enabled.
122 */
123 reg = &ehci->regs->port_status[port];
124 status = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
125 if (status & PORT_OWNER)
126 ehci_writel(ehci, status | PORT_CSC, reg);
127 else {
128 ehci_dbg(ehci, "failed handover port %d: %x\n",
129 port + 1, status);
130 ehci_writel(ehci, status & ~PORT_PE, reg);
131 }
132 }
133 }
134
135 ehci->owned_ports = 0;
136 spin_unlock_irq(&ehci->lock);
137}
138
139static int ehci_port_change(struct ehci_hcd *ehci)
140{
141 int i = HCS_N_PORTS(ehci->hcs_params);
142
143 /* First check if the controller indicates a change event */
144
145 if (ehci_readl(ehci, &ehci->regs->status) & STS_PCD)
146 return 1;
147
148 /*
149 * Not all controllers appear to update this while going from D3 to D0,
150 * so check the individual port status registers as well
151 */
152
153 while (i--)
154 if (ehci_readl(ehci, &ehci->regs->port_status[i]) & PORT_CSC)
155 return 1;
156
157 return 0;
158}
159
160void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
161 bool suspending, bool do_wakeup)
162{
163 int port;
164 u32 temp;
165
166 /* If remote wakeup is enabled for the root hub but disabled
167 * for the controller, we must adjust all the port wakeup flags
168 * when the controller is suspended or resumed. In all other
169 * cases they don't need to be changed.
170 */
171 if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup || do_wakeup)
172 return;
173
174 spin_lock_irq(&ehci->lock);
175
176 /* clear phy low-power mode before changing wakeup flags */
177 if (ehci->has_tdi_phy_lpm) {
178 port = HCS_N_PORTS(ehci->hcs_params);
179 while (port--) {
180 u32 __iomem *hostpc_reg = &ehci->regs->hostpc[port];
181
182 temp = ehci_readl(ehci, hostpc_reg);
183 ehci_writel(ehci, temp & ~HOSTPC_PHCD, hostpc_reg);
184 }
185 spin_unlock_irq(&ehci->lock);
186 msleep(5);
187 spin_lock_irq(&ehci->lock);
188 }
189
190 port = HCS_N_PORTS(ehci->hcs_params);
191 while (port--) {
192 u32 __iomem *reg = &ehci->regs->port_status[port];
193 u32 t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
194 u32 t2 = t1 & ~PORT_WAKE_BITS;
195
196 /* If we are suspending the controller, clear the flags.
197 * If we are resuming the controller, set the wakeup flags.
198 */
199 if (!suspending) {
200 if (t1 & PORT_CONNECT)
201 t2 |= PORT_WKOC_E | PORT_WKDISC_E;
202 else
203 t2 |= PORT_WKOC_E | PORT_WKCONN_E;
204 }
205 ehci_writel(ehci, t2, reg);
206 }
207
208 /* enter phy low-power mode again */
209 if (ehci->has_tdi_phy_lpm) {
210 port = HCS_N_PORTS(ehci->hcs_params);
211 while (port--) {
212 u32 __iomem *hostpc_reg = &ehci->regs->hostpc[port];
213
214 temp = ehci_readl(ehci, hostpc_reg);
215 ehci_writel(ehci, temp | HOSTPC_PHCD, hostpc_reg);
216 }
217 }
218
219 /* Does the root hub have a port wakeup pending? */
220 if (!suspending && ehci_port_change(ehci))
221 usb_hcd_resume_root_hub(ehci_to_hcd(ehci));
222
223 spin_unlock_irq(&ehci->lock);
224}
225EXPORT_SYMBOL_GPL(ehci_adjust_port_wakeup_flags);
226
227static int ehci_bus_suspend (struct usb_hcd *hcd)
228{
229 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
230 int port;
231 int mask;
232 int changed;
233 bool fs_idle_delay;
234
235 ehci_dbg(ehci, "suspend root hub\n");
236
237 if (time_before (jiffies, ehci->next_statechange))
238 msleep(5);
239
240 /* stop the schedules */
241 ehci_quiesce(ehci);
242
243 spin_lock_irq (&ehci->lock);
244 if (ehci->rh_state < EHCI_RH_RUNNING)
245 goto done;
246
247 /* Once the controller is stopped, port resumes that are already
248 * in progress won't complete. Hence if remote wakeup is enabled
249 * for the root hub and any ports are in the middle of a resume or
250 * remote wakeup, we must fail the suspend.
251 */
252 if (hcd->self.root_hub->do_remote_wakeup) {
253 if (ehci->resuming_ports) {
254 spin_unlock_irq(&ehci->lock);
255 ehci_dbg(ehci, "suspend failed because a port is resuming\n");
256 return -EBUSY;
257 }
258 }
259
260 /* Unlike other USB host controller types, EHCI doesn't have
261 * any notion of "global" or bus-wide suspend. The driver has
262 * to manually suspend all the active unsuspended ports, and
263 * then manually resume them in the bus_resume() routine.
264 */
265 ehci->bus_suspended = 0;
266 ehci->owned_ports = 0;
267 changed = 0;
268 fs_idle_delay = false;
269 port = HCS_N_PORTS(ehci->hcs_params);
270 while (port--) {
271 u32 __iomem *reg = &ehci->regs->port_status [port];
272 u32 t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
273 u32 t2 = t1 & ~PORT_WAKE_BITS;
274
275 /* keep track of which ports we suspend */
276 if (t1 & PORT_OWNER)
277 set_bit(port, &ehci->owned_ports);
278 else if ((t1 & PORT_PE) && !(t1 & PORT_SUSPEND)) {
279 t2 |= PORT_SUSPEND;
280 set_bit(port, &ehci->bus_suspended);
281 }
282
283 /* enable remote wakeup on all ports, if told to do so */
284 if (hcd->self.root_hub->do_remote_wakeup) {
285 /* only enable appropriate wake bits, otherwise the
286 * hardware can not go phy low power mode. If a race
287 * condition happens here(connection change during bits
288 * set), the port change detection will finally fix it.
289 */
290 if (t1 & PORT_CONNECT)
291 t2 |= PORT_WKOC_E | PORT_WKDISC_E;
292 else
293 t2 |= PORT_WKOC_E | PORT_WKCONN_E;
294 }
295
296 if (t1 != t2) {
297 /*
298 * On some controllers, Wake-On-Disconnect will
299 * generate false wakeup signals until the bus
300 * switches over to full-speed idle. For their
301 * sake, add a delay if we need one.
302 */
303 if ((t2 & PORT_WKDISC_E) &&
304 ehci_port_speed(ehci, t2) ==
305 USB_PORT_STAT_HIGH_SPEED)
306 fs_idle_delay = true;
307 ehci_writel(ehci, t2, reg);
308 changed = 1;
309 }
310 }
311 spin_unlock_irq(&ehci->lock);
312
313 if (changed && ehci_has_fsl_susp_errata(ehci))
314 /*
315 * Wait for at least 10 millisecondes to ensure the controller
316 * enter the suspend status before initiating a port resume
317 * using the Force Port Resume bit (Not-EHCI compatible).
318 */
319 usleep_range(10000, 20000);
320
321 if ((changed && ehci->has_tdi_phy_lpm) || fs_idle_delay) {
322 /*
323 * Wait for HCD to enter low-power mode or for the bus
324 * to switch to full-speed idle.
325 */
326 usleep_range(5000, 5500);
327 }
328
329 if (changed && ehci->has_tdi_phy_lpm) {
330 spin_lock_irq(&ehci->lock);
331 port = HCS_N_PORTS(ehci->hcs_params);
332 while (port--) {
333 u32 __iomem *hostpc_reg = &ehci->regs->hostpc[port];
334 u32 t3;
335
336 t3 = ehci_readl(ehci, hostpc_reg);
337 ehci_writel(ehci, t3 | HOSTPC_PHCD, hostpc_reg);
338 t3 = ehci_readl(ehci, hostpc_reg);
339 ehci_dbg(ehci, "Port %d phy low-power mode %s\n",
340 port, (t3 & HOSTPC_PHCD) ?
341 "succeeded" : "failed");
342 }
343 spin_unlock_irq(&ehci->lock);
344 }
345
346 /* Apparently some devices need a >= 1-uframe delay here */
347 if (ehci->bus_suspended)
348 udelay(150);
349
350 /* turn off now-idle HC */
351 ehci_halt (ehci);
352
353 spin_lock_irq(&ehci->lock);
354 if (ehci->enabled_hrtimer_events & BIT(EHCI_HRTIMER_POLL_DEAD))
355 ehci_handle_controller_death(ehci);
356 if (ehci->rh_state != EHCI_RH_RUNNING)
357 goto done;
358 ehci->rh_state = EHCI_RH_SUSPENDED;
359
360 unlink_empty_async_suspended(ehci);
361
362 /* Any IAA cycle that started before the suspend is now invalid */
363 end_iaa_cycle(ehci);
364 ehci_handle_start_intr_unlinks(ehci);
365 ehci_handle_intr_unlinks(ehci);
366 end_free_itds(ehci);
367
368 /* allow remote wakeup */
369 mask = INTR_MASK;
370 if (!hcd->self.root_hub->do_remote_wakeup)
371 mask &= ~STS_PCD;
372 ehci_writel(ehci, mask, &ehci->regs->intr_enable);
373 ehci_readl(ehci, &ehci->regs->intr_enable);
374
375 done:
376 ehci->next_statechange = jiffies + msecs_to_jiffies(10);
377 ehci->enabled_hrtimer_events = 0;
378 ehci->next_hrtimer_event = EHCI_HRTIMER_NO_EVENT;
379 spin_unlock_irq (&ehci->lock);
380
381 hrtimer_cancel(&ehci->hrtimer);
382 return 0;
383}
384
385
386/* caller has locked the root hub, and should reset/reinit on error */
387static int ehci_bus_resume (struct usb_hcd *hcd)
388{
389 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
390 u32 temp;
391 u32 power_okay;
392 int i;
393 unsigned long resume_needed = 0;
394
395 if (time_before (jiffies, ehci->next_statechange))
396 msleep(5);
397 spin_lock_irq (&ehci->lock);
398 if (!HCD_HW_ACCESSIBLE(hcd) || ehci->shutdown)
399 goto shutdown;
400
401 if (unlikely(ehci->debug)) {
402 if (!dbgp_reset_prep(hcd))
403 ehci->debug = NULL;
404 else
405 dbgp_external_startup(hcd);
406 }
407
408 /* Ideally and we've got a real resume here, and no port's power
409 * was lost. (For PCI, that means Vaux was maintained.) But we
410 * could instead be restoring a swsusp snapshot -- so that BIOS was
411 * the last user of the controller, not reset/pm hardware keeping
412 * state we gave to it.
413 */
414 power_okay = ehci_readl(ehci, &ehci->regs->intr_enable);
415 ehci_dbg(ehci, "resume root hub%s\n",
416 power_okay ? "" : " after power loss");
417
418 /* at least some APM implementations will try to deliver
419 * IRQs right away, so delay them until we're ready.
420 */
421 ehci_writel(ehci, 0, &ehci->regs->intr_enable);
422
423 /* re-init operational registers */
424 ehci_writel(ehci, 0, &ehci->regs->segment);
425 ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
426 ehci_writel(ehci, (u32) ehci->async->qh_dma, &ehci->regs->async_next);
427
428 /* restore CMD_RUN, framelist size, and irq threshold */
429 ehci->command |= CMD_RUN;
430 ehci_writel(ehci, ehci->command, &ehci->regs->command);
431 ehci->rh_state = EHCI_RH_RUNNING;
432
433 /*
434 * According to Bugzilla #8190, the port status for some controllers
435 * will be wrong without a delay. At their wrong status, the port
436 * is enabled, but not suspended neither resumed.
437 */
438 i = HCS_N_PORTS(ehci->hcs_params);
439 while (i--) {
440 temp = ehci_readl(ehci, &ehci->regs->port_status[i]);
441 if ((temp & PORT_PE) &&
442 !(temp & (PORT_SUSPEND | PORT_RESUME))) {
443 ehci_dbg(ehci, "Port status(0x%x) is wrong\n", temp);
444 spin_unlock_irq(&ehci->lock);
445 msleep(8);
446 spin_lock_irq(&ehci->lock);
447 break;
448 }
449 }
450
451 if (ehci->shutdown)
452 goto shutdown;
453
454 /* clear phy low-power mode before resume */
455 if (ehci->bus_suspended && ehci->has_tdi_phy_lpm) {
456 i = HCS_N_PORTS(ehci->hcs_params);
457 while (i--) {
458 if (test_bit(i, &ehci->bus_suspended)) {
459 u32 __iomem *hostpc_reg =
460 &ehci->regs->hostpc[i];
461
462 temp = ehci_readl(ehci, hostpc_reg);
463 ehci_writel(ehci, temp & ~HOSTPC_PHCD,
464 hostpc_reg);
465 }
466 }
467 spin_unlock_irq(&ehci->lock);
468 msleep(5);
469 spin_lock_irq(&ehci->lock);
470 if (ehci->shutdown)
471 goto shutdown;
472 }
473
474 /* manually resume the ports we suspended during bus_suspend() */
475 i = HCS_N_PORTS (ehci->hcs_params);
476 while (i--) {
477 temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
478 temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
479 if (test_bit(i, &ehci->bus_suspended) &&
480 (temp & PORT_SUSPEND)) {
481 temp |= PORT_RESUME;
482 set_bit(i, &resume_needed);
483 }
484 ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
485 }
486
487 /*
488 * msleep for USB_RESUME_TIMEOUT ms only if code is trying to resume
489 * port
490 */
491 if (resume_needed) {
492 spin_unlock_irq(&ehci->lock);
493 msleep(USB_RESUME_TIMEOUT);
494 spin_lock_irq(&ehci->lock);
495 if (ehci->shutdown)
496 goto shutdown;
497 }
498
499 i = HCS_N_PORTS (ehci->hcs_params);
500 while (i--) {
501 temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
502 if (test_bit(i, &resume_needed)) {
503 temp &= ~(PORT_RWC_BITS | PORT_SUSPEND | PORT_RESUME);
504 ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
505 }
506 }
507
508 ehci->next_statechange = jiffies + msecs_to_jiffies(5);
509 spin_unlock_irq(&ehci->lock);
510
511 ehci_handover_companion_ports(ehci);
512
513 /* Now we can safely re-enable irqs */
514 spin_lock_irq(&ehci->lock);
515 if (ehci->shutdown)
516 goto shutdown;
517 ehci_writel(ehci, INTR_MASK, &ehci->regs->intr_enable);
518 (void) ehci_readl(ehci, &ehci->regs->intr_enable);
519 spin_unlock_irq(&ehci->lock);
520
521 return 0;
522
523 shutdown:
524 spin_unlock_irq(&ehci->lock);
525 return -ESHUTDOWN;
526}
527
528#else
529
530#define ehci_bus_suspend NULL
531#define ehci_bus_resume NULL
532
533#endif /* CONFIG_PM */
534
535/*-------------------------------------------------------------------------*/
536
537/*
538 * Sets the owner of a port
539 */
540static void set_owner(struct ehci_hcd *ehci, int portnum, int new_owner)
541{
542 u32 __iomem *status_reg;
543 u32 port_status;
544 int try;
545
546 status_reg = &ehci->regs->port_status[portnum];
547
548 /*
549 * The controller won't set the OWNER bit if the port is
550 * enabled, so this loop will sometimes require at least two
551 * iterations: one to disable the port and one to set OWNER.
552 */
553 for (try = 4; try > 0; --try) {
554 spin_lock_irq(&ehci->lock);
555 port_status = ehci_readl(ehci, status_reg);
556 if ((port_status & PORT_OWNER) == new_owner
557 || (port_status & (PORT_OWNER | PORT_CONNECT))
558 == 0)
559 try = 0;
560 else {
561 port_status ^= PORT_OWNER;
562 port_status &= ~(PORT_PE | PORT_RWC_BITS);
563 ehci_writel(ehci, port_status, status_reg);
564 }
565 spin_unlock_irq(&ehci->lock);
566 if (try > 1)
567 msleep(5);
568 }
569}
570
571/*-------------------------------------------------------------------------*/
572
573static int check_reset_complete (
574 struct ehci_hcd *ehci,
575 int index,
576 u32 __iomem *status_reg,
577 int port_status
578) {
579 if (!(port_status & PORT_CONNECT))
580 return port_status;
581
582 /* if reset finished and it's still not enabled -- handoff */
583 if (!(port_status & PORT_PE)) {
584
585 /* with integrated TT, there's nobody to hand it to! */
586 if (ehci_is_TDI(ehci)) {
587 ehci_dbg (ehci,
588 "Failed to enable port %d on root hub TT\n",
589 index+1);
590 return port_status;
591 }
592
593 ehci_dbg (ehci, "port %d full speed --> companion\n",
594 index + 1);
595
596 // what happens if HCS_N_CC(params) == 0 ?
597 port_status |= PORT_OWNER;
598 port_status &= ~PORT_RWC_BITS;
599 ehci_writel(ehci, port_status, status_reg);
600
601 /* ensure 440EPX ohci controller state is operational */
602 if (ehci->has_amcc_usb23)
603 set_ohci_hcfs(ehci, 1);
604 } else {
605 ehci_dbg(ehci, "port %d reset complete, port enabled\n",
606 index + 1);
607 /* ensure 440EPx ohci controller state is suspended */
608 if (ehci->has_amcc_usb23)
609 set_ohci_hcfs(ehci, 0);
610 }
611
612 return port_status;
613}
614
615/*-------------------------------------------------------------------------*/
616
617
618/* build "status change" packet (one or two bytes) from HC registers */
619
620static int
621ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
622{
623 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
624 u32 temp, status;
625 u32 mask;
626 int ports, i, retval = 1;
627 unsigned long flags;
628 u32 ppcd = ~0;
629
630 /* init status to no-changes */
631 buf [0] = 0;
632 ports = HCS_N_PORTS (ehci->hcs_params);
633 if (ports > 7) {
634 buf [1] = 0;
635 retval++;
636 }
637
638 /* Inform the core about resumes-in-progress by returning
639 * a non-zero value even if there are no status changes.
640 */
641 status = ehci->resuming_ports;
642
643 /* Some boards (mostly VIA?) report bogus overcurrent indications,
644 * causing massive log spam unless we completely ignore them. It
645 * may be relevant that VIA VT8235 controllers, where PORT_POWER is
646 * always set, seem to clear PORT_OCC and PORT_CSC when writing to
647 * PORT_POWER; that's surprising, but maybe within-spec.
648 */
649 if (!ignore_oc)
650 mask = PORT_CSC | PORT_PEC | PORT_OCC;
651 else
652 mask = PORT_CSC | PORT_PEC;
653 // PORT_RESUME from hardware ~= PORT_STAT_C_SUSPEND
654
655 /* no hub change reports (bit 0) for now (power, ...) */
656
657 /* port N changes (bit N)? */
658 spin_lock_irqsave (&ehci->lock, flags);
659
660 /* get per-port change detect bits */
661 if (ehci->has_ppcd)
662 ppcd = ehci_readl(ehci, &ehci->regs->status) >> 16;
663
664 for (i = 0; i < ports; i++) {
665 /* leverage per-port change bits feature */
666 if (ppcd & (1 << i))
667 temp = ehci_readl(ehci, &ehci->regs->port_status[i]);
668 else
669 temp = 0;
670
671 /*
672 * Return status information even for ports with OWNER set.
673 * Otherwise hub_wq wouldn't see the disconnect event when a
674 * high-speed device is switched over to the companion
675 * controller by the user.
676 */
677
678 if ((temp & mask) != 0 || test_bit(i, &ehci->port_c_suspend)
679 || (ehci->reset_done[i] && time_after_eq(
680 jiffies, ehci->reset_done[i]))) {
681 if (i < 7)
682 buf [0] |= 1 << (i + 1);
683 else
684 buf [1] |= 1 << (i - 7);
685 status = STS_PCD;
686 }
687 }
688
689 /* If a resume is in progress, make sure it can finish */
690 if (ehci->resuming_ports)
691 mod_timer(&hcd->rh_timer, jiffies + msecs_to_jiffies(25));
692
693 spin_unlock_irqrestore (&ehci->lock, flags);
694 return status ? retval : 0;
695}
696
697/*-------------------------------------------------------------------------*/
698
699static void
700ehci_hub_descriptor (
701 struct ehci_hcd *ehci,
702 struct usb_hub_descriptor *desc
703) {
704 int ports = HCS_N_PORTS (ehci->hcs_params);
705 u16 temp;
706
707 desc->bDescriptorType = USB_DT_HUB;
708 desc->bPwrOn2PwrGood = 10; /* ehci 1.0, 2.3.9 says 20ms max */
709 desc->bHubContrCurrent = 0;
710
711 desc->bNbrPorts = ports;
712 temp = 1 + (ports / 8);
713 desc->bDescLength = 7 + 2 * temp;
714
715 /* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */
716 memset(&desc->u.hs.DeviceRemovable[0], 0, temp);
717 memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp);
718
719 temp = HUB_CHAR_INDV_PORT_OCPM; /* per-port overcurrent reporting */
720 if (HCS_PPC (ehci->hcs_params))
721 temp |= HUB_CHAR_INDV_PORT_LPSM; /* per-port power control */
722 else
723 temp |= HUB_CHAR_NO_LPSM; /* no power switching */
724#if 0
725// re-enable when we support USB_PORT_FEAT_INDICATOR below.
726 if (HCS_INDICATOR (ehci->hcs_params))
727 temp |= HUB_CHAR_PORTIND; /* per-port indicators (LEDs) */
728#endif
729 desc->wHubCharacteristics = cpu_to_le16(temp);
730}
731
732/*-------------------------------------------------------------------------*/
733#ifdef CONFIG_USB_HCD_TEST_MODE
734
735#define EHSET_TEST_SINGLE_STEP_SET_FEATURE 0x06
736
737static void usb_ehset_completion(struct urb *urb)
738{
739 struct completion *done = urb->context;
740
741 complete(done);
742}
743static int submit_single_step_set_feature(
744 struct usb_hcd *hcd,
745 struct urb *urb,
746 int is_setup
747);
748
749/*
750 * Allocate and initialize a control URB. This request will be used by the
751 * EHSET SINGLE_STEP_SET_FEATURE test in which the DATA and STATUS stages
752 * of the GetDescriptor request are sent 15 seconds after the SETUP stage.
753 * Return NULL if failed.
754 */
755static struct urb *request_single_step_set_feature_urb(
756 struct usb_device *udev,
757 void *dr,
758 void *buf,
759 struct completion *done
760) {
761 struct urb *urb;
762 struct usb_hcd *hcd = bus_to_hcd(udev->bus);
763 struct usb_host_endpoint *ep;
764
765 urb = usb_alloc_urb(0, GFP_KERNEL);
766 if (!urb)
767 return NULL;
768
769 urb->pipe = usb_rcvctrlpipe(udev, 0);
770 ep = (usb_pipein(urb->pipe) ? udev->ep_in : udev->ep_out)
771 [usb_pipeendpoint(urb->pipe)];
772 if (!ep) {
773 usb_free_urb(urb);
774 return NULL;
775 }
776
777 urb->ep = ep;
778 urb->dev = udev;
779 urb->setup_packet = (void *)dr;
780 urb->transfer_buffer = buf;
781 urb->transfer_buffer_length = USB_DT_DEVICE_SIZE;
782 urb->complete = usb_ehset_completion;
783 urb->status = -EINPROGRESS;
784 urb->actual_length = 0;
785 urb->transfer_flags = URB_DIR_IN;
786 usb_get_urb(urb);
787 atomic_inc(&urb->use_count);
788 atomic_inc(&urb->dev->urbnum);
789 urb->setup_dma = dma_map_single(
790 hcd->self.controller,
791 urb->setup_packet,
792 sizeof(struct usb_ctrlrequest),
793 DMA_TO_DEVICE);
794 urb->transfer_dma = dma_map_single(
795 hcd->self.controller,
796 urb->transfer_buffer,
797 urb->transfer_buffer_length,
798 DMA_FROM_DEVICE);
799 urb->context = done;
800 return urb;
801}
802
803static int ehset_single_step_set_feature(struct usb_hcd *hcd, int port)
804{
805 int retval = -ENOMEM;
806 struct usb_ctrlrequest *dr;
807 struct urb *urb;
808 struct usb_device *udev;
809 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
810 struct usb_device_descriptor *buf;
811 DECLARE_COMPLETION_ONSTACK(done);
812
813 /* Obtain udev of the rhub's child port */
814 udev = usb_hub_find_child(hcd->self.root_hub, port);
815 if (!udev) {
816 ehci_err(ehci, "No device attached to the RootHub\n");
817 return -ENODEV;
818 }
819 buf = kmalloc(USB_DT_DEVICE_SIZE, GFP_KERNEL);
820 if (!buf)
821 return -ENOMEM;
822
823 dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
824 if (!dr) {
825 kfree(buf);
826 return -ENOMEM;
827 }
828
829 /* Fill Setup packet for GetDescriptor */
830 dr->bRequestType = USB_DIR_IN;
831 dr->bRequest = USB_REQ_GET_DESCRIPTOR;
832 dr->wValue = cpu_to_le16(USB_DT_DEVICE << 8);
833 dr->wIndex = 0;
834 dr->wLength = cpu_to_le16(USB_DT_DEVICE_SIZE);
835 urb = request_single_step_set_feature_urb(udev, dr, buf, &done);
836 if (!urb)
837 goto cleanup;
838
839 /* Submit just the SETUP stage */
840 retval = submit_single_step_set_feature(hcd, urb, 1);
841 if (retval)
842 goto out1;
843 if (!wait_for_completion_timeout(&done, msecs_to_jiffies(2000))) {
844 usb_kill_urb(urb);
845 retval = -ETIMEDOUT;
846 ehci_err(ehci, "%s SETUP stage timed out on ep0\n", __func__);
847 goto out1;
848 }
849 msleep(15 * 1000);
850
851 /* Complete remaining DATA and STATUS stages using the same URB */
852 urb->status = -EINPROGRESS;
853 usb_get_urb(urb);
854 atomic_inc(&urb->use_count);
855 atomic_inc(&urb->dev->urbnum);
856 retval = submit_single_step_set_feature(hcd, urb, 0);
857 if (!retval && !wait_for_completion_timeout(&done,
858 msecs_to_jiffies(2000))) {
859 usb_kill_urb(urb);
860 retval = -ETIMEDOUT;
861 ehci_err(ehci, "%s IN stage timed out on ep0\n", __func__);
862 }
863out1:
864 usb_free_urb(urb);
865cleanup:
866 kfree(dr);
867 kfree(buf);
868 return retval;
869}
870#endif /* CONFIG_USB_HCD_TEST_MODE */
871/*-------------------------------------------------------------------------*/
872
873int ehci_hub_control(
874 struct usb_hcd *hcd,
875 u16 typeReq,
876 u16 wValue,
877 u16 wIndex,
878 char *buf,
879 u16 wLength
880) {
881 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
882 int ports = HCS_N_PORTS (ehci->hcs_params);
883 u32 __iomem *status_reg, *hostpc_reg;
884 u32 temp, temp1, status;
885 unsigned long flags;
886 int retval = 0;
887 unsigned selector;
888
889 /*
890 * Avoid underflow while calculating (wIndex & 0xff) - 1.
891 * The compiler might deduce that wIndex can never be 0 and then
892 * optimize away the tests for !wIndex below.
893 */
894 temp = wIndex & 0xff;
895 temp -= (temp > 0);
896 status_reg = &ehci->regs->port_status[temp];
897 hostpc_reg = &ehci->regs->hostpc[temp];
898
899 /*
900 * FIXME: support SetPortFeatures USB_PORT_FEAT_INDICATOR.
901 * HCS_INDICATOR may say we can change LEDs to off/amber/green.
902 * (track current state ourselves) ... blink for diagnostics,
903 * power, "this is the one", etc. EHCI spec supports this.
904 */
905
906 spin_lock_irqsave (&ehci->lock, flags);
907 switch (typeReq) {
908 case ClearHubFeature:
909 switch (wValue) {
910 case C_HUB_LOCAL_POWER:
911 case C_HUB_OVER_CURRENT:
912 /* no hub-wide feature/status flags */
913 break;
914 default:
915 goto error;
916 }
917 break;
918 case ClearPortFeature:
919 if (!wIndex || wIndex > ports)
920 goto error;
921 wIndex--;
922 temp = ehci_readl(ehci, status_reg);
923 temp &= ~PORT_RWC_BITS;
924
925 /*
926 * Even if OWNER is set, so the port is owned by the
927 * companion controller, hub_wq needs to be able to clear
928 * the port-change status bits (especially
929 * USB_PORT_STAT_C_CONNECTION).
930 */
931
932 switch (wValue) {
933 case USB_PORT_FEAT_ENABLE:
934 ehci_writel(ehci, temp & ~PORT_PE, status_reg);
935 break;
936 case USB_PORT_FEAT_C_ENABLE:
937 ehci_writel(ehci, temp | PORT_PEC, status_reg);
938 break;
939 case USB_PORT_FEAT_SUSPEND:
940 if (temp & PORT_RESET)
941 goto error;
942 if (ehci->no_selective_suspend)
943 break;
944#ifdef CONFIG_USB_OTG
945 if ((hcd->self.otg_port == (wIndex + 1))
946 && hcd->self.b_hnp_enable) {
947 otg_start_hnp(hcd->usb_phy->otg);
948 break;
949 }
950#endif
951 if (!(temp & PORT_SUSPEND))
952 break;
953 if ((temp & PORT_PE) == 0)
954 goto error;
955
956 /* clear phy low-power mode before resume */
957 if (ehci->has_tdi_phy_lpm) {
958 temp1 = ehci_readl(ehci, hostpc_reg);
959 ehci_writel(ehci, temp1 & ~HOSTPC_PHCD,
960 hostpc_reg);
961 spin_unlock_irqrestore(&ehci->lock, flags);
962 msleep(5);/* wait to leave low-power mode */
963 spin_lock_irqsave(&ehci->lock, flags);
964 }
965 /* resume signaling for 20 msec */
966 temp &= ~PORT_WAKE_BITS;
967 ehci_writel(ehci, temp | PORT_RESUME, status_reg);
968 ehci->reset_done[wIndex] = jiffies
969 + msecs_to_jiffies(USB_RESUME_TIMEOUT);
970 set_bit(wIndex, &ehci->resuming_ports);
971 usb_hcd_start_port_resume(&hcd->self, wIndex);
972 break;
973 case USB_PORT_FEAT_C_SUSPEND:
974 clear_bit(wIndex, &ehci->port_c_suspend);
975 break;
976 case USB_PORT_FEAT_POWER:
977 if (HCS_PPC(ehci->hcs_params)) {
978 spin_unlock_irqrestore(&ehci->lock, flags);
979 ehci_port_power(ehci, wIndex, false);
980 spin_lock_irqsave(&ehci->lock, flags);
981 }
982 break;
983 case USB_PORT_FEAT_C_CONNECTION:
984 ehci_writel(ehci, temp | PORT_CSC, status_reg);
985 break;
986 case USB_PORT_FEAT_C_OVER_CURRENT:
987 ehci_writel(ehci, temp | PORT_OCC, status_reg);
988 break;
989 case USB_PORT_FEAT_C_RESET:
990 /* GetPortStatus clears reset */
991 break;
992 default:
993 goto error;
994 }
995 ehci_readl(ehci, &ehci->regs->command); /* unblock posted write */
996 break;
997 case GetHubDescriptor:
998 ehci_hub_descriptor (ehci, (struct usb_hub_descriptor *)
999 buf);
1000 break;
1001 case GetHubStatus:
1002 /* no hub-wide feature/status flags */
1003 memset (buf, 0, 4);
1004 //cpu_to_le32s ((u32 *) buf);
1005 break;
1006 case GetPortStatus:
1007 if (!wIndex || wIndex > ports)
1008 goto error;
1009 wIndex--;
1010 status = 0;
1011 temp = ehci_readl(ehci, status_reg);
1012
1013 // wPortChange bits
1014 if (temp & PORT_CSC)
1015 status |= USB_PORT_STAT_C_CONNECTION << 16;
1016 if (temp & PORT_PEC)
1017 status |= USB_PORT_STAT_C_ENABLE << 16;
1018
1019 if ((temp & PORT_OCC) && !ignore_oc){
1020 status |= USB_PORT_STAT_C_OVERCURRENT << 16;
1021
1022 /*
1023 * Hubs should disable port power on over-current.
1024 * However, not all EHCI implementations do this
1025 * automatically, even if they _do_ support per-port
1026 * power switching; they're allowed to just limit the
1027 * current. hub_wq will turn the power back on.
1028 */
1029 if (((temp & PORT_OC) || (ehci->need_oc_pp_cycle))
1030 && HCS_PPC(ehci->hcs_params)) {
1031 spin_unlock_irqrestore(&ehci->lock, flags);
1032 ehci_port_power(ehci, wIndex, false);
1033 spin_lock_irqsave(&ehci->lock, flags);
1034 temp = ehci_readl(ehci, status_reg);
1035 }
1036 }
1037
1038 /* no reset or resume pending */
1039 if (!ehci->reset_done[wIndex]) {
1040
1041 /* Remote Wakeup received? */
1042 if (temp & PORT_RESUME) {
1043 /* resume signaling for 20 msec */
1044 ehci->reset_done[wIndex] = jiffies
1045 + msecs_to_jiffies(20);
1046 usb_hcd_start_port_resume(&hcd->self, wIndex);
1047 set_bit(wIndex, &ehci->resuming_ports);
1048 /* check the port again */
1049 mod_timer(&ehci_to_hcd(ehci)->rh_timer,
1050 ehci->reset_done[wIndex]);
1051 }
1052
1053 /* reset or resume not yet complete */
1054 } else if (!time_after_eq(jiffies, ehci->reset_done[wIndex])) {
1055 ; /* wait until it is complete */
1056
1057 /* resume completed */
1058 } else if (test_bit(wIndex, &ehci->resuming_ports)) {
1059 clear_bit(wIndex, &ehci->suspended_ports);
1060 set_bit(wIndex, &ehci->port_c_suspend);
1061 ehci->reset_done[wIndex] = 0;
1062 usb_hcd_end_port_resume(&hcd->self, wIndex);
1063
1064 /* stop resume signaling */
1065 temp &= ~(PORT_RWC_BITS | PORT_SUSPEND | PORT_RESUME);
1066 ehci_writel(ehci, temp, status_reg);
1067 clear_bit(wIndex, &ehci->resuming_ports);
1068 retval = ehci_handshake(ehci, status_reg,
1069 PORT_RESUME, 0, 2000 /* 2msec */);
1070 if (retval != 0) {
1071 ehci_err(ehci, "port %d resume error %d\n",
1072 wIndex + 1, retval);
1073 goto error;
1074 }
1075 temp = ehci_readl(ehci, status_reg);
1076
1077 /* whoever resets must GetPortStatus to complete it!! */
1078 } else {
1079 status |= USB_PORT_STAT_C_RESET << 16;
1080 ehci->reset_done [wIndex] = 0;
1081
1082 /* force reset to complete */
1083 ehci_writel(ehci, temp & ~(PORT_RWC_BITS | PORT_RESET),
1084 status_reg);
1085 /* REVISIT: some hardware needs 550+ usec to clear
1086 * this bit; seems too long to spin routinely...
1087 */
1088 retval = ehci_handshake(ehci, status_reg,
1089 PORT_RESET, 0, 1000);
1090 if (retval != 0) {
1091 ehci_err (ehci, "port %d reset error %d\n",
1092 wIndex + 1, retval);
1093 goto error;
1094 }
1095
1096 /* see what we found out */
1097 temp = check_reset_complete (ehci, wIndex, status_reg,
1098 ehci_readl(ehci, status_reg));
1099 }
1100
1101 /* transfer dedicated ports to the companion hc */
1102 if ((temp & PORT_CONNECT) &&
1103 test_bit(wIndex, &ehci->companion_ports)) {
1104 temp &= ~PORT_RWC_BITS;
1105 temp |= PORT_OWNER;
1106 ehci_writel(ehci, temp, status_reg);
1107 ehci_dbg(ehci, "port %d --> companion\n", wIndex + 1);
1108 temp = ehci_readl(ehci, status_reg);
1109 }
1110
1111 /*
1112 * Even if OWNER is set, there's no harm letting hub_wq
1113 * see the wPortStatus values (they should all be 0 except
1114 * for PORT_POWER anyway).
1115 */
1116
1117 if (temp & PORT_CONNECT) {
1118 status |= USB_PORT_STAT_CONNECTION;
1119 // status may be from integrated TT
1120 if (ehci->has_hostpc) {
1121 temp1 = ehci_readl(ehci, hostpc_reg);
1122 status |= ehci_port_speed(ehci, temp1);
1123 } else
1124 status |= ehci_port_speed(ehci, temp);
1125 }
1126 if (temp & PORT_PE)
1127 status |= USB_PORT_STAT_ENABLE;
1128
1129 /* maybe the port was unsuspended without our knowledge */
1130 if (temp & (PORT_SUSPEND|PORT_RESUME)) {
1131 status |= USB_PORT_STAT_SUSPEND;
1132 } else if (test_bit(wIndex, &ehci->suspended_ports)) {
1133 clear_bit(wIndex, &ehci->suspended_ports);
1134 clear_bit(wIndex, &ehci->resuming_ports);
1135 ehci->reset_done[wIndex] = 0;
1136 if (temp & PORT_PE)
1137 set_bit(wIndex, &ehci->port_c_suspend);
1138 usb_hcd_end_port_resume(&hcd->self, wIndex);
1139 }
1140
1141 if (temp & PORT_OC)
1142 status |= USB_PORT_STAT_OVERCURRENT;
1143 if (temp & PORT_RESET)
1144 status |= USB_PORT_STAT_RESET;
1145 if (temp & PORT_POWER)
1146 status |= USB_PORT_STAT_POWER;
1147 if (test_bit(wIndex, &ehci->port_c_suspend))
1148 status |= USB_PORT_STAT_C_SUSPEND << 16;
1149
1150 if (status & ~0xffff) /* only if wPortChange is interesting */
1151 dbg_port(ehci, "GetStatus", wIndex + 1, temp);
1152 put_unaligned_le32(status, buf);
1153 break;
1154 case SetHubFeature:
1155 switch (wValue) {
1156 case C_HUB_LOCAL_POWER:
1157 case C_HUB_OVER_CURRENT:
1158 /* no hub-wide feature/status flags */
1159 break;
1160 default:
1161 goto error;
1162 }
1163 break;
1164 case SetPortFeature:
1165 selector = wIndex >> 8;
1166 wIndex &= 0xff;
1167 if (unlikely(ehci->debug)) {
1168 /* If the debug port is active any port
1169 * feature requests should get denied */
1170 if (wIndex == HCS_DEBUG_PORT(ehci->hcs_params) &&
1171 (readl(&ehci->debug->control) & DBGP_ENABLED)) {
1172 retval = -ENODEV;
1173 goto error_exit;
1174 }
1175 }
1176 if (!wIndex || wIndex > ports)
1177 goto error;
1178 wIndex--;
1179 temp = ehci_readl(ehci, status_reg);
1180 if (temp & PORT_OWNER)
1181 break;
1182
1183 temp &= ~PORT_RWC_BITS;
1184 switch (wValue) {
1185 case USB_PORT_FEAT_SUSPEND:
1186 if (ehci->no_selective_suspend)
1187 break;
1188 if ((temp & PORT_PE) == 0
1189 || (temp & PORT_RESET) != 0)
1190 goto error;
1191
1192 /* After above check the port must be connected.
1193 * Set appropriate bit thus could put phy into low power
1194 * mode if we have tdi_phy_lpm feature
1195 */
1196 temp &= ~PORT_WKCONN_E;
1197 temp |= PORT_WKDISC_E | PORT_WKOC_E;
1198 ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
1199 if (ehci->has_tdi_phy_lpm) {
1200 spin_unlock_irqrestore(&ehci->lock, flags);
1201 msleep(5);/* 5ms for HCD enter low pwr mode */
1202 spin_lock_irqsave(&ehci->lock, flags);
1203 temp1 = ehci_readl(ehci, hostpc_reg);
1204 ehci_writel(ehci, temp1 | HOSTPC_PHCD,
1205 hostpc_reg);
1206 temp1 = ehci_readl(ehci, hostpc_reg);
1207 ehci_dbg(ehci, "Port%d phy low pwr mode %s\n",
1208 wIndex, (temp1 & HOSTPC_PHCD) ?
1209 "succeeded" : "failed");
1210 }
1211 if (ehci_has_fsl_susp_errata(ehci)) {
1212 /* 10ms for HCD enter suspend */
1213 spin_unlock_irqrestore(&ehci->lock, flags);
1214 usleep_range(10000, 20000);
1215 spin_lock_irqsave(&ehci->lock, flags);
1216 }
1217 set_bit(wIndex, &ehci->suspended_ports);
1218 break;
1219 case USB_PORT_FEAT_POWER:
1220 if (HCS_PPC(ehci->hcs_params)) {
1221 spin_unlock_irqrestore(&ehci->lock, flags);
1222 ehci_port_power(ehci, wIndex, true);
1223 spin_lock_irqsave(&ehci->lock, flags);
1224 }
1225 break;
1226 case USB_PORT_FEAT_RESET:
1227 if (temp & (PORT_SUSPEND|PORT_RESUME))
1228 goto error;
1229 /* line status bits may report this as low speed,
1230 * which can be fine if this root hub has a
1231 * transaction translator built in.
1232 */
1233 if ((temp & (PORT_PE|PORT_CONNECT)) == PORT_CONNECT
1234 && !ehci_is_TDI(ehci)
1235 && PORT_USB11 (temp)) {
1236 ehci_dbg (ehci,
1237 "port %d low speed --> companion\n",
1238 wIndex + 1);
1239 temp |= PORT_OWNER;
1240 } else {
1241 temp |= PORT_RESET;
1242 temp &= ~PORT_PE;
1243
1244 /*
1245 * caller must wait, then call GetPortStatus
1246 * usb 2.0 spec says 50 ms resets on root
1247 */
1248 ehci->reset_done [wIndex] = jiffies
1249 + msecs_to_jiffies (50);
1250
1251 /*
1252 * Force full-speed connect for FSL high-speed
1253 * erratum; disable HS Chirp by setting PFSC bit
1254 */
1255 if (ehci_has_fsl_hs_errata(ehci))
1256 temp |= (1 << PORTSC_FSL_PFSC);
1257 }
1258 ehci_writel(ehci, temp, status_reg);
1259 break;
1260
1261 /* For downstream facing ports (these): one hub port is put
1262 * into test mode according to USB2 11.24.2.13, then the hub
1263 * must be reset (which for root hub now means rmmod+modprobe,
1264 * or else system reboot). See EHCI 2.3.9 and 4.14 for info
1265 * about the EHCI-specific stuff.
1266 */
1267 case USB_PORT_FEAT_TEST:
1268#ifdef CONFIG_USB_HCD_TEST_MODE
1269 if (selector == EHSET_TEST_SINGLE_STEP_SET_FEATURE) {
1270 spin_unlock_irqrestore(&ehci->lock, flags);
1271 retval = ehset_single_step_set_feature(hcd,
1272 wIndex + 1);
1273 spin_lock_irqsave(&ehci->lock, flags);
1274 break;
1275 }
1276#endif
1277 if (!selector || selector > 5)
1278 goto error;
1279 spin_unlock_irqrestore(&ehci->lock, flags);
1280 ehci_quiesce(ehci);
1281 spin_lock_irqsave(&ehci->lock, flags);
1282
1283 /* Put all enabled ports into suspend */
1284 while (ports--) {
1285 u32 __iomem *sreg =
1286 &ehci->regs->port_status[ports];
1287
1288 temp = ehci_readl(ehci, sreg) & ~PORT_RWC_BITS;
1289 if (temp & PORT_PE)
1290 ehci_writel(ehci, temp | PORT_SUSPEND,
1291 sreg);
1292 }
1293
1294 spin_unlock_irqrestore(&ehci->lock, flags);
1295 ehci_halt(ehci);
1296 spin_lock_irqsave(&ehci->lock, flags);
1297
1298 temp = ehci_readl(ehci, status_reg);
1299 temp |= selector << 16;
1300 ehci_writel(ehci, temp, status_reg);
1301 break;
1302
1303 default:
1304 goto error;
1305 }
1306 ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
1307 break;
1308
1309 default:
1310error:
1311 /* "stall" on error */
1312 retval = -EPIPE;
1313 }
1314error_exit:
1315 spin_unlock_irqrestore (&ehci->lock, flags);
1316 return retval;
1317}
1318EXPORT_SYMBOL_GPL(ehci_hub_control);
1319
1320static void ehci_relinquish_port(struct usb_hcd *hcd, int portnum)
1321{
1322 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
1323
1324 if (ehci_is_TDI(ehci))
1325 return;
1326 set_owner(ehci, --portnum, PORT_OWNER);
1327}
1328
1329static int ehci_port_handed_over(struct usb_hcd *hcd, int portnum)
1330{
1331 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
1332 u32 __iomem *reg;
1333
1334 if (ehci_is_TDI(ehci))
1335 return 0;
1336 reg = &ehci->regs->port_status[portnum - 1];
1337 return ehci_readl(ehci, reg) & PORT_OWNER;
1338}
1339
1340static int ehci_port_power(struct ehci_hcd *ehci, int portnum, bool enable)
1341{
1342 struct usb_hcd *hcd = ehci_to_hcd(ehci);
1343 u32 __iomem *status_reg = &ehci->regs->port_status[portnum];
1344 u32 temp = ehci_readl(ehci, status_reg) & ~PORT_RWC_BITS;
1345
1346 if (enable)
1347 ehci_writel(ehci, temp | PORT_POWER, status_reg);
1348 else
1349 ehci_writel(ehci, temp & ~PORT_POWER, status_reg);
1350
1351 if (hcd->driver->port_power)
1352 hcd->driver->port_power(hcd, portnum, enable);
1353
1354 return 0;
1355}