Loading...
Note: File does not exist in v3.1.
1/*
2 * SH RSPI driver
3 *
4 * Copyright (C) 2012, 2013 Renesas Solutions Corp.
5 * Copyright (C) 2014 Glider bvba
6 *
7 * Based on spi-sh.c:
8 * Copyright (C) 2011 Renesas Solutions Corp.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; version 2 of the License.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 */
19
20#include <linux/module.h>
21#include <linux/kernel.h>
22#include <linux/sched.h>
23#include <linux/errno.h>
24#include <linux/interrupt.h>
25#include <linux/platform_device.h>
26#include <linux/io.h>
27#include <linux/clk.h>
28#include <linux/dmaengine.h>
29#include <linux/dma-mapping.h>
30#include <linux/of_device.h>
31#include <linux/pm_runtime.h>
32#include <linux/sh_dma.h>
33#include <linux/spi/spi.h>
34#include <linux/spi/rspi.h>
35
36#define RSPI_SPCR 0x00 /* Control Register */
37#define RSPI_SSLP 0x01 /* Slave Select Polarity Register */
38#define RSPI_SPPCR 0x02 /* Pin Control Register */
39#define RSPI_SPSR 0x03 /* Status Register */
40#define RSPI_SPDR 0x04 /* Data Register */
41#define RSPI_SPSCR 0x08 /* Sequence Control Register */
42#define RSPI_SPSSR 0x09 /* Sequence Status Register */
43#define RSPI_SPBR 0x0a /* Bit Rate Register */
44#define RSPI_SPDCR 0x0b /* Data Control Register */
45#define RSPI_SPCKD 0x0c /* Clock Delay Register */
46#define RSPI_SSLND 0x0d /* Slave Select Negation Delay Register */
47#define RSPI_SPND 0x0e /* Next-Access Delay Register */
48#define RSPI_SPCR2 0x0f /* Control Register 2 (SH only) */
49#define RSPI_SPCMD0 0x10 /* Command Register 0 */
50#define RSPI_SPCMD1 0x12 /* Command Register 1 */
51#define RSPI_SPCMD2 0x14 /* Command Register 2 */
52#define RSPI_SPCMD3 0x16 /* Command Register 3 */
53#define RSPI_SPCMD4 0x18 /* Command Register 4 */
54#define RSPI_SPCMD5 0x1a /* Command Register 5 */
55#define RSPI_SPCMD6 0x1c /* Command Register 6 */
56#define RSPI_SPCMD7 0x1e /* Command Register 7 */
57#define RSPI_SPCMD(i) (RSPI_SPCMD0 + (i) * 2)
58#define RSPI_NUM_SPCMD 8
59#define RSPI_RZ_NUM_SPCMD 4
60#define QSPI_NUM_SPCMD 4
61
62/* RSPI on RZ only */
63#define RSPI_SPBFCR 0x20 /* Buffer Control Register */
64#define RSPI_SPBFDR 0x22 /* Buffer Data Count Setting Register */
65
66/* QSPI only */
67#define QSPI_SPBFCR 0x18 /* Buffer Control Register */
68#define QSPI_SPBDCR 0x1a /* Buffer Data Count Register */
69#define QSPI_SPBMUL0 0x1c /* Transfer Data Length Multiplier Setting Register 0 */
70#define QSPI_SPBMUL1 0x20 /* Transfer Data Length Multiplier Setting Register 1 */
71#define QSPI_SPBMUL2 0x24 /* Transfer Data Length Multiplier Setting Register 2 */
72#define QSPI_SPBMUL3 0x28 /* Transfer Data Length Multiplier Setting Register 3 */
73#define QSPI_SPBMUL(i) (QSPI_SPBMUL0 + (i) * 4)
74
75/* SPCR - Control Register */
76#define SPCR_SPRIE 0x80 /* Receive Interrupt Enable */
77#define SPCR_SPE 0x40 /* Function Enable */
78#define SPCR_SPTIE 0x20 /* Transmit Interrupt Enable */
79#define SPCR_SPEIE 0x10 /* Error Interrupt Enable */
80#define SPCR_MSTR 0x08 /* Master/Slave Mode Select */
81#define SPCR_MODFEN 0x04 /* Mode Fault Error Detection Enable */
82/* RSPI on SH only */
83#define SPCR_TXMD 0x02 /* TX Only Mode (vs. Full Duplex) */
84#define SPCR_SPMS 0x01 /* 3-wire Mode (vs. 4-wire) */
85/* QSPI on R-Car Gen2 only */
86#define SPCR_WSWAP 0x02 /* Word Swap of read-data for DMAC */
87#define SPCR_BSWAP 0x01 /* Byte Swap of read-data for DMAC */
88
89/* SSLP - Slave Select Polarity Register */
90#define SSLP_SSL1P 0x02 /* SSL1 Signal Polarity Setting */
91#define SSLP_SSL0P 0x01 /* SSL0 Signal Polarity Setting */
92
93/* SPPCR - Pin Control Register */
94#define SPPCR_MOIFE 0x20 /* MOSI Idle Value Fixing Enable */
95#define SPPCR_MOIFV 0x10 /* MOSI Idle Fixed Value */
96#define SPPCR_SPOM 0x04
97#define SPPCR_SPLP2 0x02 /* Loopback Mode 2 (non-inverting) */
98#define SPPCR_SPLP 0x01 /* Loopback Mode (inverting) */
99
100#define SPPCR_IO3FV 0x04 /* Single-/Dual-SPI Mode IO3 Output Fixed Value */
101#define SPPCR_IO2FV 0x04 /* Single-/Dual-SPI Mode IO2 Output Fixed Value */
102
103/* SPSR - Status Register */
104#define SPSR_SPRF 0x80 /* Receive Buffer Full Flag */
105#define SPSR_TEND 0x40 /* Transmit End */
106#define SPSR_SPTEF 0x20 /* Transmit Buffer Empty Flag */
107#define SPSR_PERF 0x08 /* Parity Error Flag */
108#define SPSR_MODF 0x04 /* Mode Fault Error Flag */
109#define SPSR_IDLNF 0x02 /* RSPI Idle Flag */
110#define SPSR_OVRF 0x01 /* Overrun Error Flag (RSPI only) */
111
112/* SPSCR - Sequence Control Register */
113#define SPSCR_SPSLN_MASK 0x07 /* Sequence Length Specification */
114
115/* SPSSR - Sequence Status Register */
116#define SPSSR_SPECM_MASK 0x70 /* Command Error Mask */
117#define SPSSR_SPCP_MASK 0x07 /* Command Pointer Mask */
118
119/* SPDCR - Data Control Register */
120#define SPDCR_TXDMY 0x80 /* Dummy Data Transmission Enable */
121#define SPDCR_SPLW1 0x40 /* Access Width Specification (RZ) */
122#define SPDCR_SPLW0 0x20 /* Access Width Specification (RZ) */
123#define SPDCR_SPLLWORD (SPDCR_SPLW1 | SPDCR_SPLW0)
124#define SPDCR_SPLWORD SPDCR_SPLW1
125#define SPDCR_SPLBYTE SPDCR_SPLW0
126#define SPDCR_SPLW 0x20 /* Access Width Specification (SH) */
127#define SPDCR_SPRDTD 0x10 /* Receive Transmit Data Select (SH) */
128#define SPDCR_SLSEL1 0x08
129#define SPDCR_SLSEL0 0x04
130#define SPDCR_SLSEL_MASK 0x0c /* SSL1 Output Select (SH) */
131#define SPDCR_SPFC1 0x02
132#define SPDCR_SPFC0 0x01
133#define SPDCR_SPFC_MASK 0x03 /* Frame Count Setting (1-4) (SH) */
134
135/* SPCKD - Clock Delay Register */
136#define SPCKD_SCKDL_MASK 0x07 /* Clock Delay Setting (1-8) */
137
138/* SSLND - Slave Select Negation Delay Register */
139#define SSLND_SLNDL_MASK 0x07 /* SSL Negation Delay Setting (1-8) */
140
141/* SPND - Next-Access Delay Register */
142#define SPND_SPNDL_MASK 0x07 /* Next-Access Delay Setting (1-8) */
143
144/* SPCR2 - Control Register 2 */
145#define SPCR2_PTE 0x08 /* Parity Self-Test Enable */
146#define SPCR2_SPIE 0x04 /* Idle Interrupt Enable */
147#define SPCR2_SPOE 0x02 /* Odd Parity Enable (vs. Even) */
148#define SPCR2_SPPE 0x01 /* Parity Enable */
149
150/* SPCMDn - Command Registers */
151#define SPCMD_SCKDEN 0x8000 /* Clock Delay Setting Enable */
152#define SPCMD_SLNDEN 0x4000 /* SSL Negation Delay Setting Enable */
153#define SPCMD_SPNDEN 0x2000 /* Next-Access Delay Enable */
154#define SPCMD_LSBF 0x1000 /* LSB First */
155#define SPCMD_SPB_MASK 0x0f00 /* Data Length Setting */
156#define SPCMD_SPB_8_TO_16(bit) (((bit - 1) << 8) & SPCMD_SPB_MASK)
157#define SPCMD_SPB_8BIT 0x0000 /* QSPI only */
158#define SPCMD_SPB_16BIT 0x0100
159#define SPCMD_SPB_20BIT 0x0000
160#define SPCMD_SPB_24BIT 0x0100
161#define SPCMD_SPB_32BIT 0x0200
162#define SPCMD_SSLKP 0x0080 /* SSL Signal Level Keeping */
163#define SPCMD_SPIMOD_MASK 0x0060 /* SPI Operating Mode (QSPI only) */
164#define SPCMD_SPIMOD1 0x0040
165#define SPCMD_SPIMOD0 0x0020
166#define SPCMD_SPIMOD_SINGLE 0
167#define SPCMD_SPIMOD_DUAL SPCMD_SPIMOD0
168#define SPCMD_SPIMOD_QUAD SPCMD_SPIMOD1
169#define SPCMD_SPRW 0x0010 /* SPI Read/Write Access (Dual/Quad) */
170#define SPCMD_SSLA_MASK 0x0030 /* SSL Assert Signal Setting (RSPI) */
171#define SPCMD_BRDV_MASK 0x000c /* Bit Rate Division Setting */
172#define SPCMD_CPOL 0x0002 /* Clock Polarity Setting */
173#define SPCMD_CPHA 0x0001 /* Clock Phase Setting */
174
175/* SPBFCR - Buffer Control Register */
176#define SPBFCR_TXRST 0x80 /* Transmit Buffer Data Reset */
177#define SPBFCR_RXRST 0x40 /* Receive Buffer Data Reset */
178#define SPBFCR_TXTRG_MASK 0x30 /* Transmit Buffer Data Triggering Number */
179#define SPBFCR_RXTRG_MASK 0x07 /* Receive Buffer Data Triggering Number */
180/* QSPI on R-Car Gen2 */
181#define SPBFCR_TXTRG_1B 0x00 /* 31 bytes (1 byte available) */
182#define SPBFCR_TXTRG_32B 0x30 /* 0 byte (32 bytes available) */
183#define SPBFCR_RXTRG_1B 0x00 /* 1 byte (31 bytes available) */
184#define SPBFCR_RXTRG_32B 0x07 /* 32 bytes (0 byte available) */
185
186#define QSPI_BUFFER_SIZE 32u
187
188struct rspi_data {
189 void __iomem *addr;
190 u32 max_speed_hz;
191 struct spi_master *master;
192 wait_queue_head_t wait;
193 struct clk *clk;
194 u16 spcmd;
195 u8 spsr;
196 u8 sppcr;
197 int rx_irq, tx_irq;
198 const struct spi_ops *ops;
199
200 unsigned dma_callbacked:1;
201 unsigned byte_access:1;
202};
203
204static void rspi_write8(const struct rspi_data *rspi, u8 data, u16 offset)
205{
206 iowrite8(data, rspi->addr + offset);
207}
208
209static void rspi_write16(const struct rspi_data *rspi, u16 data, u16 offset)
210{
211 iowrite16(data, rspi->addr + offset);
212}
213
214static void rspi_write32(const struct rspi_data *rspi, u32 data, u16 offset)
215{
216 iowrite32(data, rspi->addr + offset);
217}
218
219static u8 rspi_read8(const struct rspi_data *rspi, u16 offset)
220{
221 return ioread8(rspi->addr + offset);
222}
223
224static u16 rspi_read16(const struct rspi_data *rspi, u16 offset)
225{
226 return ioread16(rspi->addr + offset);
227}
228
229static void rspi_write_data(const struct rspi_data *rspi, u16 data)
230{
231 if (rspi->byte_access)
232 rspi_write8(rspi, data, RSPI_SPDR);
233 else /* 16 bit */
234 rspi_write16(rspi, data, RSPI_SPDR);
235}
236
237static u16 rspi_read_data(const struct rspi_data *rspi)
238{
239 if (rspi->byte_access)
240 return rspi_read8(rspi, RSPI_SPDR);
241 else /* 16 bit */
242 return rspi_read16(rspi, RSPI_SPDR);
243}
244
245/* optional functions */
246struct spi_ops {
247 int (*set_config_register)(struct rspi_data *rspi, int access_size);
248 int (*transfer_one)(struct spi_master *master, struct spi_device *spi,
249 struct spi_transfer *xfer);
250 u16 mode_bits;
251 u16 flags;
252 u16 fifo_size;
253};
254
255/*
256 * functions for RSPI on legacy SH
257 */
258static int rspi_set_config_register(struct rspi_data *rspi, int access_size)
259{
260 int spbr;
261
262 /* Sets output mode, MOSI signal, and (optionally) loopback */
263 rspi_write8(rspi, rspi->sppcr, RSPI_SPPCR);
264
265 /* Sets transfer bit rate */
266 spbr = DIV_ROUND_UP(clk_get_rate(rspi->clk),
267 2 * rspi->max_speed_hz) - 1;
268 rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR);
269
270 /* Disable dummy transmission, set 16-bit word access, 1 frame */
271 rspi_write8(rspi, 0, RSPI_SPDCR);
272 rspi->byte_access = 0;
273
274 /* Sets RSPCK, SSL, next-access delay value */
275 rspi_write8(rspi, 0x00, RSPI_SPCKD);
276 rspi_write8(rspi, 0x00, RSPI_SSLND);
277 rspi_write8(rspi, 0x00, RSPI_SPND);
278
279 /* Sets parity, interrupt mask */
280 rspi_write8(rspi, 0x00, RSPI_SPCR2);
281
282 /* Sets SPCMD */
283 rspi->spcmd |= SPCMD_SPB_8_TO_16(access_size);
284 rspi_write16(rspi, rspi->spcmd, RSPI_SPCMD0);
285
286 /* Sets RSPI mode */
287 rspi_write8(rspi, SPCR_MSTR, RSPI_SPCR);
288
289 return 0;
290}
291
292/*
293 * functions for RSPI on RZ
294 */
295static int rspi_rz_set_config_register(struct rspi_data *rspi, int access_size)
296{
297 int spbr;
298 int div = 0;
299 unsigned long clksrc;
300
301 /* Sets output mode, MOSI signal, and (optionally) loopback */
302 rspi_write8(rspi, rspi->sppcr, RSPI_SPPCR);
303
304 clksrc = clk_get_rate(rspi->clk);
305 while (div < 3) {
306 if (rspi->max_speed_hz >= clksrc/4) /* 4=(CLK/2)/2 */
307 break;
308 div++;
309 clksrc /= 2;
310 }
311
312 /* Sets transfer bit rate */
313 spbr = DIV_ROUND_UP(clksrc, 2 * rspi->max_speed_hz) - 1;
314 rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR);
315 rspi->spcmd |= div << 2;
316
317 /* Disable dummy transmission, set byte access */
318 rspi_write8(rspi, SPDCR_SPLBYTE, RSPI_SPDCR);
319 rspi->byte_access = 1;
320
321 /* Sets RSPCK, SSL, next-access delay value */
322 rspi_write8(rspi, 0x00, RSPI_SPCKD);
323 rspi_write8(rspi, 0x00, RSPI_SSLND);
324 rspi_write8(rspi, 0x00, RSPI_SPND);
325
326 /* Sets SPCMD */
327 rspi->spcmd |= SPCMD_SPB_8_TO_16(access_size);
328 rspi_write16(rspi, rspi->spcmd, RSPI_SPCMD0);
329
330 /* Sets RSPI mode */
331 rspi_write8(rspi, SPCR_MSTR, RSPI_SPCR);
332
333 return 0;
334}
335
336/*
337 * functions for QSPI
338 */
339static int qspi_set_config_register(struct rspi_data *rspi, int access_size)
340{
341 int spbr;
342
343 /* Sets output mode, MOSI signal, and (optionally) loopback */
344 rspi_write8(rspi, rspi->sppcr, RSPI_SPPCR);
345
346 /* Sets transfer bit rate */
347 spbr = DIV_ROUND_UP(clk_get_rate(rspi->clk), 2 * rspi->max_speed_hz);
348 rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR);
349
350 /* Disable dummy transmission, set byte access */
351 rspi_write8(rspi, 0, RSPI_SPDCR);
352 rspi->byte_access = 1;
353
354 /* Sets RSPCK, SSL, next-access delay value */
355 rspi_write8(rspi, 0x00, RSPI_SPCKD);
356 rspi_write8(rspi, 0x00, RSPI_SSLND);
357 rspi_write8(rspi, 0x00, RSPI_SPND);
358
359 /* Data Length Setting */
360 if (access_size == 8)
361 rspi->spcmd |= SPCMD_SPB_8BIT;
362 else if (access_size == 16)
363 rspi->spcmd |= SPCMD_SPB_16BIT;
364 else
365 rspi->spcmd |= SPCMD_SPB_32BIT;
366
367 rspi->spcmd |= SPCMD_SCKDEN | SPCMD_SLNDEN | SPCMD_SPNDEN;
368
369 /* Resets transfer data length */
370 rspi_write32(rspi, 0, QSPI_SPBMUL0);
371
372 /* Resets transmit and receive buffer */
373 rspi_write8(rspi, SPBFCR_TXRST | SPBFCR_RXRST, QSPI_SPBFCR);
374 /* Sets buffer to allow normal operation */
375 rspi_write8(rspi, 0x00, QSPI_SPBFCR);
376
377 /* Sets SPCMD */
378 rspi_write16(rspi, rspi->spcmd, RSPI_SPCMD0);
379
380 /* Enables SPI function in master mode */
381 rspi_write8(rspi, SPCR_SPE | SPCR_MSTR, RSPI_SPCR);
382
383 return 0;
384}
385
386static void qspi_update(const struct rspi_data *rspi, u8 mask, u8 val, u8 reg)
387{
388 u8 data;
389
390 data = rspi_read8(rspi, reg);
391 data &= ~mask;
392 data |= (val & mask);
393 rspi_write8(rspi, data, reg);
394}
395
396static unsigned int qspi_set_send_trigger(struct rspi_data *rspi,
397 unsigned int len)
398{
399 unsigned int n;
400
401 n = min(len, QSPI_BUFFER_SIZE);
402
403 if (len >= QSPI_BUFFER_SIZE) {
404 /* sets triggering number to 32 bytes */
405 qspi_update(rspi, SPBFCR_TXTRG_MASK,
406 SPBFCR_TXTRG_32B, QSPI_SPBFCR);
407 } else {
408 /* sets triggering number to 1 byte */
409 qspi_update(rspi, SPBFCR_TXTRG_MASK,
410 SPBFCR_TXTRG_1B, QSPI_SPBFCR);
411 }
412
413 return n;
414}
415
416static int qspi_set_receive_trigger(struct rspi_data *rspi, unsigned int len)
417{
418 unsigned int n;
419
420 n = min(len, QSPI_BUFFER_SIZE);
421
422 if (len >= QSPI_BUFFER_SIZE) {
423 /* sets triggering number to 32 bytes */
424 qspi_update(rspi, SPBFCR_RXTRG_MASK,
425 SPBFCR_RXTRG_32B, QSPI_SPBFCR);
426 } else {
427 /* sets triggering number to 1 byte */
428 qspi_update(rspi, SPBFCR_RXTRG_MASK,
429 SPBFCR_RXTRG_1B, QSPI_SPBFCR);
430 }
431 return n;
432}
433
434#define set_config_register(spi, n) spi->ops->set_config_register(spi, n)
435
436static void rspi_enable_irq(const struct rspi_data *rspi, u8 enable)
437{
438 rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) | enable, RSPI_SPCR);
439}
440
441static void rspi_disable_irq(const struct rspi_data *rspi, u8 disable)
442{
443 rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) & ~disable, RSPI_SPCR);
444}
445
446static int rspi_wait_for_interrupt(struct rspi_data *rspi, u8 wait_mask,
447 u8 enable_bit)
448{
449 int ret;
450
451 rspi->spsr = rspi_read8(rspi, RSPI_SPSR);
452 if (rspi->spsr & wait_mask)
453 return 0;
454
455 rspi_enable_irq(rspi, enable_bit);
456 ret = wait_event_timeout(rspi->wait, rspi->spsr & wait_mask, HZ);
457 if (ret == 0 && !(rspi->spsr & wait_mask))
458 return -ETIMEDOUT;
459
460 return 0;
461}
462
463static inline int rspi_wait_for_tx_empty(struct rspi_data *rspi)
464{
465 return rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE);
466}
467
468static inline int rspi_wait_for_rx_full(struct rspi_data *rspi)
469{
470 return rspi_wait_for_interrupt(rspi, SPSR_SPRF, SPCR_SPRIE);
471}
472
473static int rspi_data_out(struct rspi_data *rspi, u8 data)
474{
475 int error = rspi_wait_for_tx_empty(rspi);
476 if (error < 0) {
477 dev_err(&rspi->master->dev, "transmit timeout\n");
478 return error;
479 }
480 rspi_write_data(rspi, data);
481 return 0;
482}
483
484static int rspi_data_in(struct rspi_data *rspi)
485{
486 int error;
487 u8 data;
488
489 error = rspi_wait_for_rx_full(rspi);
490 if (error < 0) {
491 dev_err(&rspi->master->dev, "receive timeout\n");
492 return error;
493 }
494 data = rspi_read_data(rspi);
495 return data;
496}
497
498static int rspi_pio_transfer(struct rspi_data *rspi, const u8 *tx, u8 *rx,
499 unsigned int n)
500{
501 while (n-- > 0) {
502 if (tx) {
503 int ret = rspi_data_out(rspi, *tx++);
504 if (ret < 0)
505 return ret;
506 }
507 if (rx) {
508 int ret = rspi_data_in(rspi);
509 if (ret < 0)
510 return ret;
511 *rx++ = ret;
512 }
513 }
514
515 return 0;
516}
517
518static void rspi_dma_complete(void *arg)
519{
520 struct rspi_data *rspi = arg;
521
522 rspi->dma_callbacked = 1;
523 wake_up_interruptible(&rspi->wait);
524}
525
526static int rspi_dma_transfer(struct rspi_data *rspi, struct sg_table *tx,
527 struct sg_table *rx)
528{
529 struct dma_async_tx_descriptor *desc_tx = NULL, *desc_rx = NULL;
530 u8 irq_mask = 0;
531 unsigned int other_irq = 0;
532 dma_cookie_t cookie;
533 int ret;
534
535 /* First prepare and submit the DMA request(s), as this may fail */
536 if (rx) {
537 desc_rx = dmaengine_prep_slave_sg(rspi->master->dma_rx,
538 rx->sgl, rx->nents, DMA_FROM_DEVICE,
539 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
540 if (!desc_rx) {
541 ret = -EAGAIN;
542 goto no_dma_rx;
543 }
544
545 desc_rx->callback = rspi_dma_complete;
546 desc_rx->callback_param = rspi;
547 cookie = dmaengine_submit(desc_rx);
548 if (dma_submit_error(cookie)) {
549 ret = cookie;
550 goto no_dma_rx;
551 }
552
553 irq_mask |= SPCR_SPRIE;
554 }
555
556 if (tx) {
557 desc_tx = dmaengine_prep_slave_sg(rspi->master->dma_tx,
558 tx->sgl, tx->nents, DMA_TO_DEVICE,
559 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
560 if (!desc_tx) {
561 ret = -EAGAIN;
562 goto no_dma_tx;
563 }
564
565 if (rx) {
566 /* No callback */
567 desc_tx->callback = NULL;
568 } else {
569 desc_tx->callback = rspi_dma_complete;
570 desc_tx->callback_param = rspi;
571 }
572 cookie = dmaengine_submit(desc_tx);
573 if (dma_submit_error(cookie)) {
574 ret = cookie;
575 goto no_dma_tx;
576 }
577
578 irq_mask |= SPCR_SPTIE;
579 }
580
581 /*
582 * DMAC needs SPxIE, but if SPxIE is set, the IRQ routine will be
583 * called. So, this driver disables the IRQ while DMA transfer.
584 */
585 if (tx)
586 disable_irq(other_irq = rspi->tx_irq);
587 if (rx && rspi->rx_irq != other_irq)
588 disable_irq(rspi->rx_irq);
589
590 rspi_enable_irq(rspi, irq_mask);
591 rspi->dma_callbacked = 0;
592
593 /* Now start DMA */
594 if (rx)
595 dma_async_issue_pending(rspi->master->dma_rx);
596 if (tx)
597 dma_async_issue_pending(rspi->master->dma_tx);
598
599 ret = wait_event_interruptible_timeout(rspi->wait,
600 rspi->dma_callbacked, HZ);
601 if (ret > 0 && rspi->dma_callbacked)
602 ret = 0;
603 else if (!ret) {
604 dev_err(&rspi->master->dev, "DMA timeout\n");
605 ret = -ETIMEDOUT;
606 if (tx)
607 dmaengine_terminate_all(rspi->master->dma_tx);
608 if (rx)
609 dmaengine_terminate_all(rspi->master->dma_rx);
610 }
611
612 rspi_disable_irq(rspi, irq_mask);
613
614 if (tx)
615 enable_irq(rspi->tx_irq);
616 if (rx && rspi->rx_irq != other_irq)
617 enable_irq(rspi->rx_irq);
618
619 return ret;
620
621no_dma_tx:
622 if (rx)
623 dmaengine_terminate_all(rspi->master->dma_rx);
624no_dma_rx:
625 if (ret == -EAGAIN) {
626 pr_warn_once("%s %s: DMA not available, falling back to PIO\n",
627 dev_driver_string(&rspi->master->dev),
628 dev_name(&rspi->master->dev));
629 }
630 return ret;
631}
632
633static void rspi_receive_init(const struct rspi_data *rspi)
634{
635 u8 spsr;
636
637 spsr = rspi_read8(rspi, RSPI_SPSR);
638 if (spsr & SPSR_SPRF)
639 rspi_read_data(rspi); /* dummy read */
640 if (spsr & SPSR_OVRF)
641 rspi_write8(rspi, rspi_read8(rspi, RSPI_SPSR) & ~SPSR_OVRF,
642 RSPI_SPSR);
643}
644
645static void rspi_rz_receive_init(const struct rspi_data *rspi)
646{
647 rspi_receive_init(rspi);
648 rspi_write8(rspi, SPBFCR_TXRST | SPBFCR_RXRST, RSPI_SPBFCR);
649 rspi_write8(rspi, 0, RSPI_SPBFCR);
650}
651
652static void qspi_receive_init(const struct rspi_data *rspi)
653{
654 u8 spsr;
655
656 spsr = rspi_read8(rspi, RSPI_SPSR);
657 if (spsr & SPSR_SPRF)
658 rspi_read_data(rspi); /* dummy read */
659 rspi_write8(rspi, SPBFCR_TXRST | SPBFCR_RXRST, QSPI_SPBFCR);
660 rspi_write8(rspi, 0, QSPI_SPBFCR);
661}
662
663static bool __rspi_can_dma(const struct rspi_data *rspi,
664 const struct spi_transfer *xfer)
665{
666 return xfer->len > rspi->ops->fifo_size;
667}
668
669static bool rspi_can_dma(struct spi_master *master, struct spi_device *spi,
670 struct spi_transfer *xfer)
671{
672 struct rspi_data *rspi = spi_master_get_devdata(master);
673
674 return __rspi_can_dma(rspi, xfer);
675}
676
677static int rspi_dma_check_then_transfer(struct rspi_data *rspi,
678 struct spi_transfer *xfer)
679{
680 if (!rspi->master->can_dma || !__rspi_can_dma(rspi, xfer))
681 return -EAGAIN;
682
683 /* rx_buf can be NULL on RSPI on SH in TX-only Mode */
684 return rspi_dma_transfer(rspi, &xfer->tx_sg,
685 xfer->rx_buf ? &xfer->rx_sg : NULL);
686}
687
688static int rspi_common_transfer(struct rspi_data *rspi,
689 struct spi_transfer *xfer)
690{
691 int ret;
692
693 ret = rspi_dma_check_then_transfer(rspi, xfer);
694 if (ret != -EAGAIN)
695 return ret;
696
697 ret = rspi_pio_transfer(rspi, xfer->tx_buf, xfer->rx_buf, xfer->len);
698 if (ret < 0)
699 return ret;
700
701 /* Wait for the last transmission */
702 rspi_wait_for_tx_empty(rspi);
703
704 return 0;
705}
706
707static int rspi_transfer_one(struct spi_master *master, struct spi_device *spi,
708 struct spi_transfer *xfer)
709{
710 struct rspi_data *rspi = spi_master_get_devdata(master);
711 u8 spcr;
712
713 spcr = rspi_read8(rspi, RSPI_SPCR);
714 if (xfer->rx_buf) {
715 rspi_receive_init(rspi);
716 spcr &= ~SPCR_TXMD;
717 } else {
718 spcr |= SPCR_TXMD;
719 }
720 rspi_write8(rspi, spcr, RSPI_SPCR);
721
722 return rspi_common_transfer(rspi, xfer);
723}
724
725static int rspi_rz_transfer_one(struct spi_master *master,
726 struct spi_device *spi,
727 struct spi_transfer *xfer)
728{
729 struct rspi_data *rspi = spi_master_get_devdata(master);
730
731 rspi_rz_receive_init(rspi);
732
733 return rspi_common_transfer(rspi, xfer);
734}
735
736static int qspi_trigger_transfer_out_in(struct rspi_data *rspi, const u8 *tx,
737 u8 *rx, unsigned int len)
738{
739 unsigned int i, n;
740 int ret;
741
742 while (len > 0) {
743 n = qspi_set_send_trigger(rspi, len);
744 qspi_set_receive_trigger(rspi, len);
745 if (n == QSPI_BUFFER_SIZE) {
746 ret = rspi_wait_for_tx_empty(rspi);
747 if (ret < 0) {
748 dev_err(&rspi->master->dev, "transmit timeout\n");
749 return ret;
750 }
751 for (i = 0; i < n; i++)
752 rspi_write_data(rspi, *tx++);
753
754 ret = rspi_wait_for_rx_full(rspi);
755 if (ret < 0) {
756 dev_err(&rspi->master->dev, "receive timeout\n");
757 return ret;
758 }
759 for (i = 0; i < n; i++)
760 *rx++ = rspi_read_data(rspi);
761 } else {
762 ret = rspi_pio_transfer(rspi, tx, rx, n);
763 if (ret < 0)
764 return ret;
765 }
766 len -= n;
767 }
768
769 return 0;
770}
771
772static int qspi_transfer_out_in(struct rspi_data *rspi,
773 struct spi_transfer *xfer)
774{
775 int ret;
776
777 qspi_receive_init(rspi);
778
779 ret = rspi_dma_check_then_transfer(rspi, xfer);
780 if (ret != -EAGAIN)
781 return ret;
782
783 return qspi_trigger_transfer_out_in(rspi, xfer->tx_buf,
784 xfer->rx_buf, xfer->len);
785}
786
787static int qspi_transfer_out(struct rspi_data *rspi, struct spi_transfer *xfer)
788{
789 const u8 *tx = xfer->tx_buf;
790 unsigned int n = xfer->len;
791 unsigned int i, len;
792 int ret;
793
794 if (rspi->master->can_dma && __rspi_can_dma(rspi, xfer)) {
795 ret = rspi_dma_transfer(rspi, &xfer->tx_sg, NULL);
796 if (ret != -EAGAIN)
797 return ret;
798 }
799
800 while (n > 0) {
801 len = qspi_set_send_trigger(rspi, n);
802 if (len == QSPI_BUFFER_SIZE) {
803 ret = rspi_wait_for_tx_empty(rspi);
804 if (ret < 0) {
805 dev_err(&rspi->master->dev, "transmit timeout\n");
806 return ret;
807 }
808 for (i = 0; i < len; i++)
809 rspi_write_data(rspi, *tx++);
810 } else {
811 ret = rspi_pio_transfer(rspi, tx, NULL, n);
812 if (ret < 0)
813 return ret;
814 }
815 n -= len;
816 }
817
818 /* Wait for the last transmission */
819 rspi_wait_for_tx_empty(rspi);
820
821 return 0;
822}
823
824static int qspi_transfer_in(struct rspi_data *rspi, struct spi_transfer *xfer)
825{
826 u8 *rx = xfer->rx_buf;
827 unsigned int n = xfer->len;
828 unsigned int i, len;
829 int ret;
830
831 if (rspi->master->can_dma && __rspi_can_dma(rspi, xfer)) {
832 int ret = rspi_dma_transfer(rspi, NULL, &xfer->rx_sg);
833 if (ret != -EAGAIN)
834 return ret;
835 }
836
837 while (n > 0) {
838 len = qspi_set_receive_trigger(rspi, n);
839 if (len == QSPI_BUFFER_SIZE) {
840 ret = rspi_wait_for_rx_full(rspi);
841 if (ret < 0) {
842 dev_err(&rspi->master->dev, "receive timeout\n");
843 return ret;
844 }
845 for (i = 0; i < len; i++)
846 *rx++ = rspi_read_data(rspi);
847 } else {
848 ret = rspi_pio_transfer(rspi, NULL, rx, n);
849 if (ret < 0)
850 return ret;
851 *rx++ = ret;
852 }
853 n -= len;
854 }
855
856 return 0;
857}
858
859static int qspi_transfer_one(struct spi_master *master, struct spi_device *spi,
860 struct spi_transfer *xfer)
861{
862 struct rspi_data *rspi = spi_master_get_devdata(master);
863
864 if (spi->mode & SPI_LOOP) {
865 return qspi_transfer_out_in(rspi, xfer);
866 } else if (xfer->tx_nbits > SPI_NBITS_SINGLE) {
867 /* Quad or Dual SPI Write */
868 return qspi_transfer_out(rspi, xfer);
869 } else if (xfer->rx_nbits > SPI_NBITS_SINGLE) {
870 /* Quad or Dual SPI Read */
871 return qspi_transfer_in(rspi, xfer);
872 } else {
873 /* Single SPI Transfer */
874 return qspi_transfer_out_in(rspi, xfer);
875 }
876}
877
878static int rspi_setup(struct spi_device *spi)
879{
880 struct rspi_data *rspi = spi_master_get_devdata(spi->master);
881
882 rspi->max_speed_hz = spi->max_speed_hz;
883
884 rspi->spcmd = SPCMD_SSLKP;
885 if (spi->mode & SPI_CPOL)
886 rspi->spcmd |= SPCMD_CPOL;
887 if (spi->mode & SPI_CPHA)
888 rspi->spcmd |= SPCMD_CPHA;
889
890 /* CMOS output mode and MOSI signal from previous transfer */
891 rspi->sppcr = 0;
892 if (spi->mode & SPI_LOOP)
893 rspi->sppcr |= SPPCR_SPLP;
894
895 set_config_register(rspi, 8);
896
897 return 0;
898}
899
900static u16 qspi_transfer_mode(const struct spi_transfer *xfer)
901{
902 if (xfer->tx_buf)
903 switch (xfer->tx_nbits) {
904 case SPI_NBITS_QUAD:
905 return SPCMD_SPIMOD_QUAD;
906 case SPI_NBITS_DUAL:
907 return SPCMD_SPIMOD_DUAL;
908 default:
909 return 0;
910 }
911 if (xfer->rx_buf)
912 switch (xfer->rx_nbits) {
913 case SPI_NBITS_QUAD:
914 return SPCMD_SPIMOD_QUAD | SPCMD_SPRW;
915 case SPI_NBITS_DUAL:
916 return SPCMD_SPIMOD_DUAL | SPCMD_SPRW;
917 default:
918 return 0;
919 }
920
921 return 0;
922}
923
924static int qspi_setup_sequencer(struct rspi_data *rspi,
925 const struct spi_message *msg)
926{
927 const struct spi_transfer *xfer;
928 unsigned int i = 0, len = 0;
929 u16 current_mode = 0xffff, mode;
930
931 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
932 mode = qspi_transfer_mode(xfer);
933 if (mode == current_mode) {
934 len += xfer->len;
935 continue;
936 }
937
938 /* Transfer mode change */
939 if (i) {
940 /* Set transfer data length of previous transfer */
941 rspi_write32(rspi, len, QSPI_SPBMUL(i - 1));
942 }
943
944 if (i >= QSPI_NUM_SPCMD) {
945 dev_err(&msg->spi->dev,
946 "Too many different transfer modes");
947 return -EINVAL;
948 }
949
950 /* Program transfer mode for this transfer */
951 rspi_write16(rspi, rspi->spcmd | mode, RSPI_SPCMD(i));
952 current_mode = mode;
953 len = xfer->len;
954 i++;
955 }
956 if (i) {
957 /* Set final transfer data length and sequence length */
958 rspi_write32(rspi, len, QSPI_SPBMUL(i - 1));
959 rspi_write8(rspi, i - 1, RSPI_SPSCR);
960 }
961
962 return 0;
963}
964
965static int rspi_prepare_message(struct spi_master *master,
966 struct spi_message *msg)
967{
968 struct rspi_data *rspi = spi_master_get_devdata(master);
969 int ret;
970
971 if (msg->spi->mode &
972 (SPI_TX_DUAL | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD)) {
973 /* Setup sequencer for messages with multiple transfer modes */
974 ret = qspi_setup_sequencer(rspi, msg);
975 if (ret < 0)
976 return ret;
977 }
978
979 /* Enable SPI function in master mode */
980 rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) | SPCR_SPE, RSPI_SPCR);
981 return 0;
982}
983
984static int rspi_unprepare_message(struct spi_master *master,
985 struct spi_message *msg)
986{
987 struct rspi_data *rspi = spi_master_get_devdata(master);
988
989 /* Disable SPI function */
990 rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) & ~SPCR_SPE, RSPI_SPCR);
991
992 /* Reset sequencer for Single SPI Transfers */
993 rspi_write16(rspi, rspi->spcmd, RSPI_SPCMD0);
994 rspi_write8(rspi, 0, RSPI_SPSCR);
995 return 0;
996}
997
998static irqreturn_t rspi_irq_mux(int irq, void *_sr)
999{
1000 struct rspi_data *rspi = _sr;
1001 u8 spsr;
1002 irqreturn_t ret = IRQ_NONE;
1003 u8 disable_irq = 0;
1004
1005 rspi->spsr = spsr = rspi_read8(rspi, RSPI_SPSR);
1006 if (spsr & SPSR_SPRF)
1007 disable_irq |= SPCR_SPRIE;
1008 if (spsr & SPSR_SPTEF)
1009 disable_irq |= SPCR_SPTIE;
1010
1011 if (disable_irq) {
1012 ret = IRQ_HANDLED;
1013 rspi_disable_irq(rspi, disable_irq);
1014 wake_up(&rspi->wait);
1015 }
1016
1017 return ret;
1018}
1019
1020static irqreturn_t rspi_irq_rx(int irq, void *_sr)
1021{
1022 struct rspi_data *rspi = _sr;
1023 u8 spsr;
1024
1025 rspi->spsr = spsr = rspi_read8(rspi, RSPI_SPSR);
1026 if (spsr & SPSR_SPRF) {
1027 rspi_disable_irq(rspi, SPCR_SPRIE);
1028 wake_up(&rspi->wait);
1029 return IRQ_HANDLED;
1030 }
1031
1032 return 0;
1033}
1034
1035static irqreturn_t rspi_irq_tx(int irq, void *_sr)
1036{
1037 struct rspi_data *rspi = _sr;
1038 u8 spsr;
1039
1040 rspi->spsr = spsr = rspi_read8(rspi, RSPI_SPSR);
1041 if (spsr & SPSR_SPTEF) {
1042 rspi_disable_irq(rspi, SPCR_SPTIE);
1043 wake_up(&rspi->wait);
1044 return IRQ_HANDLED;
1045 }
1046
1047 return 0;
1048}
1049
1050static struct dma_chan *rspi_request_dma_chan(struct device *dev,
1051 enum dma_transfer_direction dir,
1052 unsigned int id,
1053 dma_addr_t port_addr)
1054{
1055 dma_cap_mask_t mask;
1056 struct dma_chan *chan;
1057 struct dma_slave_config cfg;
1058 int ret;
1059
1060 dma_cap_zero(mask);
1061 dma_cap_set(DMA_SLAVE, mask);
1062
1063 chan = dma_request_slave_channel_compat(mask, shdma_chan_filter,
1064 (void *)(unsigned long)id, dev,
1065 dir == DMA_MEM_TO_DEV ? "tx" : "rx");
1066 if (!chan) {
1067 dev_warn(dev, "dma_request_slave_channel_compat failed\n");
1068 return NULL;
1069 }
1070
1071 memset(&cfg, 0, sizeof(cfg));
1072 cfg.direction = dir;
1073 if (dir == DMA_MEM_TO_DEV) {
1074 cfg.dst_addr = port_addr;
1075 cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
1076 } else {
1077 cfg.src_addr = port_addr;
1078 cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
1079 }
1080
1081 ret = dmaengine_slave_config(chan, &cfg);
1082 if (ret) {
1083 dev_warn(dev, "dmaengine_slave_config failed %d\n", ret);
1084 dma_release_channel(chan);
1085 return NULL;
1086 }
1087
1088 return chan;
1089}
1090
1091static int rspi_request_dma(struct device *dev, struct spi_master *master,
1092 const struct resource *res)
1093{
1094 const struct rspi_plat_data *rspi_pd = dev_get_platdata(dev);
1095 unsigned int dma_tx_id, dma_rx_id;
1096
1097 if (dev->of_node) {
1098 /* In the OF case we will get the slave IDs from the DT */
1099 dma_tx_id = 0;
1100 dma_rx_id = 0;
1101 } else if (rspi_pd && rspi_pd->dma_tx_id && rspi_pd->dma_rx_id) {
1102 dma_tx_id = rspi_pd->dma_tx_id;
1103 dma_rx_id = rspi_pd->dma_rx_id;
1104 } else {
1105 /* The driver assumes no error. */
1106 return 0;
1107 }
1108
1109 master->dma_tx = rspi_request_dma_chan(dev, DMA_MEM_TO_DEV, dma_tx_id,
1110 res->start + RSPI_SPDR);
1111 if (!master->dma_tx)
1112 return -ENODEV;
1113
1114 master->dma_rx = rspi_request_dma_chan(dev, DMA_DEV_TO_MEM, dma_rx_id,
1115 res->start + RSPI_SPDR);
1116 if (!master->dma_rx) {
1117 dma_release_channel(master->dma_tx);
1118 master->dma_tx = NULL;
1119 return -ENODEV;
1120 }
1121
1122 master->can_dma = rspi_can_dma;
1123 dev_info(dev, "DMA available");
1124 return 0;
1125}
1126
1127static void rspi_release_dma(struct spi_master *master)
1128{
1129 if (master->dma_tx)
1130 dma_release_channel(master->dma_tx);
1131 if (master->dma_rx)
1132 dma_release_channel(master->dma_rx);
1133}
1134
1135static int rspi_remove(struct platform_device *pdev)
1136{
1137 struct rspi_data *rspi = platform_get_drvdata(pdev);
1138
1139 rspi_release_dma(rspi->master);
1140 pm_runtime_disable(&pdev->dev);
1141
1142 return 0;
1143}
1144
1145static const struct spi_ops rspi_ops = {
1146 .set_config_register = rspi_set_config_register,
1147 .transfer_one = rspi_transfer_one,
1148 .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP,
1149 .flags = SPI_MASTER_MUST_TX,
1150 .fifo_size = 8,
1151};
1152
1153static const struct spi_ops rspi_rz_ops = {
1154 .set_config_register = rspi_rz_set_config_register,
1155 .transfer_one = rspi_rz_transfer_one,
1156 .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP,
1157 .flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX,
1158 .fifo_size = 8, /* 8 for TX, 32 for RX */
1159};
1160
1161static const struct spi_ops qspi_ops = {
1162 .set_config_register = qspi_set_config_register,
1163 .transfer_one = qspi_transfer_one,
1164 .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP |
1165 SPI_TX_DUAL | SPI_TX_QUAD |
1166 SPI_RX_DUAL | SPI_RX_QUAD,
1167 .flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX,
1168 .fifo_size = 32,
1169};
1170
1171#ifdef CONFIG_OF
1172static const struct of_device_id rspi_of_match[] = {
1173 /* RSPI on legacy SH */
1174 { .compatible = "renesas,rspi", .data = &rspi_ops },
1175 /* RSPI on RZ/A1H */
1176 { .compatible = "renesas,rspi-rz", .data = &rspi_rz_ops },
1177 /* QSPI on R-Car Gen2 */
1178 { .compatible = "renesas,qspi", .data = &qspi_ops },
1179 { /* sentinel */ }
1180};
1181
1182MODULE_DEVICE_TABLE(of, rspi_of_match);
1183
1184static int rspi_parse_dt(struct device *dev, struct spi_master *master)
1185{
1186 u32 num_cs;
1187 int error;
1188
1189 /* Parse DT properties */
1190 error = of_property_read_u32(dev->of_node, "num-cs", &num_cs);
1191 if (error) {
1192 dev_err(dev, "of_property_read_u32 num-cs failed %d\n", error);
1193 return error;
1194 }
1195
1196 master->num_chipselect = num_cs;
1197 return 0;
1198}
1199#else
1200#define rspi_of_match NULL
1201static inline int rspi_parse_dt(struct device *dev, struct spi_master *master)
1202{
1203 return -EINVAL;
1204}
1205#endif /* CONFIG_OF */
1206
1207static int rspi_request_irq(struct device *dev, unsigned int irq,
1208 irq_handler_t handler, const char *suffix,
1209 void *dev_id)
1210{
1211 const char *name = devm_kasprintf(dev, GFP_KERNEL, "%s:%s",
1212 dev_name(dev), suffix);
1213 if (!name)
1214 return -ENOMEM;
1215
1216 return devm_request_irq(dev, irq, handler, 0, name, dev_id);
1217}
1218
1219static int rspi_probe(struct platform_device *pdev)
1220{
1221 struct resource *res;
1222 struct spi_master *master;
1223 struct rspi_data *rspi;
1224 int ret;
1225 const struct of_device_id *of_id;
1226 const struct rspi_plat_data *rspi_pd;
1227 const struct spi_ops *ops;
1228
1229 master = spi_alloc_master(&pdev->dev, sizeof(struct rspi_data));
1230 if (master == NULL) {
1231 dev_err(&pdev->dev, "spi_alloc_master error.\n");
1232 return -ENOMEM;
1233 }
1234
1235 of_id = of_match_device(rspi_of_match, &pdev->dev);
1236 if (of_id) {
1237 ops = of_id->data;
1238 ret = rspi_parse_dt(&pdev->dev, master);
1239 if (ret)
1240 goto error1;
1241 } else {
1242 ops = (struct spi_ops *)pdev->id_entry->driver_data;
1243 rspi_pd = dev_get_platdata(&pdev->dev);
1244 if (rspi_pd && rspi_pd->num_chipselect)
1245 master->num_chipselect = rspi_pd->num_chipselect;
1246 else
1247 master->num_chipselect = 2; /* default */
1248 }
1249
1250 /* ops parameter check */
1251 if (!ops->set_config_register) {
1252 dev_err(&pdev->dev, "there is no set_config_register\n");
1253 ret = -ENODEV;
1254 goto error1;
1255 }
1256
1257 rspi = spi_master_get_devdata(master);
1258 platform_set_drvdata(pdev, rspi);
1259 rspi->ops = ops;
1260 rspi->master = master;
1261
1262 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1263 rspi->addr = devm_ioremap_resource(&pdev->dev, res);
1264 if (IS_ERR(rspi->addr)) {
1265 ret = PTR_ERR(rspi->addr);
1266 goto error1;
1267 }
1268
1269 rspi->clk = devm_clk_get(&pdev->dev, NULL);
1270 if (IS_ERR(rspi->clk)) {
1271 dev_err(&pdev->dev, "cannot get clock\n");
1272 ret = PTR_ERR(rspi->clk);
1273 goto error1;
1274 }
1275
1276 pm_runtime_enable(&pdev->dev);
1277
1278 init_waitqueue_head(&rspi->wait);
1279
1280 master->bus_num = pdev->id;
1281 master->setup = rspi_setup;
1282 master->auto_runtime_pm = true;
1283 master->transfer_one = ops->transfer_one;
1284 master->prepare_message = rspi_prepare_message;
1285 master->unprepare_message = rspi_unprepare_message;
1286 master->mode_bits = ops->mode_bits;
1287 master->flags = ops->flags;
1288 master->dev.of_node = pdev->dev.of_node;
1289
1290 ret = platform_get_irq_byname(pdev, "rx");
1291 if (ret < 0) {
1292 ret = platform_get_irq_byname(pdev, "mux");
1293 if (ret < 0)
1294 ret = platform_get_irq(pdev, 0);
1295 if (ret >= 0)
1296 rspi->rx_irq = rspi->tx_irq = ret;
1297 } else {
1298 rspi->rx_irq = ret;
1299 ret = platform_get_irq_byname(pdev, "tx");
1300 if (ret >= 0)
1301 rspi->tx_irq = ret;
1302 }
1303 if (ret < 0) {
1304 dev_err(&pdev->dev, "platform_get_irq error\n");
1305 goto error2;
1306 }
1307
1308 if (rspi->rx_irq == rspi->tx_irq) {
1309 /* Single multiplexed interrupt */
1310 ret = rspi_request_irq(&pdev->dev, rspi->rx_irq, rspi_irq_mux,
1311 "mux", rspi);
1312 } else {
1313 /* Multi-interrupt mode, only SPRI and SPTI are used */
1314 ret = rspi_request_irq(&pdev->dev, rspi->rx_irq, rspi_irq_rx,
1315 "rx", rspi);
1316 if (!ret)
1317 ret = rspi_request_irq(&pdev->dev, rspi->tx_irq,
1318 rspi_irq_tx, "tx", rspi);
1319 }
1320 if (ret < 0) {
1321 dev_err(&pdev->dev, "request_irq error\n");
1322 goto error2;
1323 }
1324
1325 ret = rspi_request_dma(&pdev->dev, master, res);
1326 if (ret < 0)
1327 dev_warn(&pdev->dev, "DMA not available, using PIO\n");
1328
1329 ret = devm_spi_register_master(&pdev->dev, master);
1330 if (ret < 0) {
1331 dev_err(&pdev->dev, "spi_register_master error.\n");
1332 goto error3;
1333 }
1334
1335 dev_info(&pdev->dev, "probed\n");
1336
1337 return 0;
1338
1339error3:
1340 rspi_release_dma(master);
1341error2:
1342 pm_runtime_disable(&pdev->dev);
1343error1:
1344 spi_master_put(master);
1345
1346 return ret;
1347}
1348
1349static const struct platform_device_id spi_driver_ids[] = {
1350 { "rspi", (kernel_ulong_t)&rspi_ops },
1351 { "rspi-rz", (kernel_ulong_t)&rspi_rz_ops },
1352 { "qspi", (kernel_ulong_t)&qspi_ops },
1353 {},
1354};
1355
1356MODULE_DEVICE_TABLE(platform, spi_driver_ids);
1357
1358static struct platform_driver rspi_driver = {
1359 .probe = rspi_probe,
1360 .remove = rspi_remove,
1361 .id_table = spi_driver_ids,
1362 .driver = {
1363 .name = "renesas_spi",
1364 .of_match_table = of_match_ptr(rspi_of_match),
1365 },
1366};
1367module_platform_driver(rspi_driver);
1368
1369MODULE_DESCRIPTION("Renesas RSPI bus driver");
1370MODULE_LICENSE("GPL v2");
1371MODULE_AUTHOR("Yoshihiro Shimoda");
1372MODULE_ALIAS("platform:rspi");