1/*
  2 * This program is free software; you can redistribute it and/or modify it
  3 * under the terms of the GNU General Public License version 2 as published
  4 * by the Free Software Foundation.
  5 *
  6 * Parts of this file are based on Ralink's 2.6.21 BSP
  7 *
  8 * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
  9 * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
 10 * Copyright (C) 2013 John Crispin <john@phrozen.org>
 11 */
 12
 13#include <linux/kernel.h>
 14#include <linux/init.h>
 15#include <linux/module.h>
 16
 17#include <asm/mipsregs.h>
 18#include <asm/mach-ralink/ralink_regs.h>
 19#include <asm/mach-ralink/rt288x.h>
 20#include <asm/mach-ralink/pinmux.h>
 21
 22#include "common.h"
 23
 24static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
 25static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
 26static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 7, 8) };
 27static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
 28static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
 29static struct rt2880_pmx_func sdram_func[] = { FUNC("sdram", 0, 24, 16) };
 30static struct rt2880_pmx_func pci_func[] = { FUNC("pci", 0, 40, 32) };
 31
 32static struct rt2880_pmx_group rt2880_pinmux_data_act[] = {
 33	GRP("i2c", i2c_func, 1, RT2880_GPIO_MODE_I2C),
 34	GRP("spi", spi_func, 1, RT2880_GPIO_MODE_SPI),
 35	GRP("uartlite", uartlite_func, 1, RT2880_GPIO_MODE_UART0),
 36	GRP("jtag", jtag_func, 1, RT2880_GPIO_MODE_JTAG),
 37	GRP("mdio", mdio_func, 1, RT2880_GPIO_MODE_MDIO),
 38	GRP("sdram", sdram_func, 1, RT2880_GPIO_MODE_SDRAM),
 39	GRP("pci", pci_func, 1, RT2880_GPIO_MODE_PCI),
 40	{ 0 }
 41};
 42
 43void __init ralink_clk_init(void)
 44{
 45	unsigned long cpu_rate, wmac_rate = 40000000;
 46	u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG);
 47	t = ((t >> SYSTEM_CONFIG_CPUCLK_SHIFT) & SYSTEM_CONFIG_CPUCLK_MASK);
 48
 49	switch (t) {
 50	case SYSTEM_CONFIG_CPUCLK_250:
 51		cpu_rate = 250000000;
 52		break;
 53	case SYSTEM_CONFIG_CPUCLK_266:
 54		cpu_rate = 266666667;
 55		break;
 56	case SYSTEM_CONFIG_CPUCLK_280:
 57		cpu_rate = 280000000;
 58		break;
 59	case SYSTEM_CONFIG_CPUCLK_300:
 60		cpu_rate = 300000000;
 61		break;
 62	}
 63
 64	ralink_clk_add("cpu", cpu_rate);
 65	ralink_clk_add("300100.timer", cpu_rate / 2);
 66	ralink_clk_add("300120.watchdog", cpu_rate / 2);
 67	ralink_clk_add("300500.uart", cpu_rate / 2);
 68	ralink_clk_add("300c00.uartlite", cpu_rate / 2);
 69	ralink_clk_add("400000.ethernet", cpu_rate / 2);
 70	ralink_clk_add("480000.wmac", wmac_rate);
 71}
 72
 73void __init ralink_of_remap(void)
 74{
 75	rt_sysc_membase = plat_of_remap_node("ralink,rt2880-sysc");
 76	rt_memc_membase = plat_of_remap_node("ralink,rt2880-memc");
 77
 78	if (!rt_sysc_membase || !rt_memc_membase)
 79		panic("Failed to remap core resources");
 80}
 81
 82void prom_soc_init(struct ralink_soc_info *soc_info)
 83{
 84	void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT2880_SYSC_BASE);
 85	const char *name;
 86	u32 n0;
 87	u32 n1;
 88	u32 id;
 89
 90	n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
 91	n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
 92	id = __raw_readl(sysc + SYSC_REG_CHIP_ID);
 93
 94	if (n0 == RT2880_CHIP_NAME0 && n1 == RT2880_CHIP_NAME1) {
 95		soc_info->compatible = "ralink,r2880-soc";
 96		name = "RT2880";
 97	} else {
 98		panic("rt288x: unknown SoC, n0:%08x n1:%08x", n0, n1);
 99	}
100
101	snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
102		"Ralink %s id:%u rev:%u",
103		name,
104		(id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
105		(id & CHIP_ID_REV_MASK));
106
107	soc_info->mem_base = RT2880_SDRAM_BASE;
108	soc_info->mem_size_min = RT2880_MEM_SIZE_MIN;
109	soc_info->mem_size_max = RT2880_MEM_SIZE_MAX;
110
111	rt2880_pinmux_data = rt2880_pinmux_data_act;
112	ralink_soc = RT2880_SOC;
113}