Loading...
1/*
2 * drivers/usb/host/ehci-orion.c
3 *
4 * Tzachi Perelstein <tzachi@marvell.com>
5 *
6 * This file is licensed under the terms of the GNU General Public
7 * License version 2. This program is licensed "as is" without any
8 * warranty of any kind, whether express or implied.
9 */
10
11#include <linux/kernel.h>
12#include <linux/module.h>
13#include <linux/platform_device.h>
14#include <linux/mbus.h>
15#include <plat/ehci-orion.h>
16
17#define rdl(off) __raw_readl(hcd->regs + (off))
18#define wrl(off, val) __raw_writel((val), hcd->regs + (off))
19
20#define USB_CMD 0x140
21#define USB_MODE 0x1a8
22#define USB_CAUSE 0x310
23#define USB_MASK 0x314
24#define USB_WINDOW_CTRL(i) (0x320 + ((i) << 4))
25#define USB_WINDOW_BASE(i) (0x324 + ((i) << 4))
26#define USB_IPG 0x360
27#define USB_PHY_PWR_CTRL 0x400
28#define USB_PHY_TX_CTRL 0x420
29#define USB_PHY_RX_CTRL 0x430
30#define USB_PHY_IVREF_CTRL 0x440
31#define USB_PHY_TST_GRP_CTRL 0x450
32
33/*
34 * Implement Orion USB controller specification guidelines
35 */
36static void orion_usb_phy_v1_setup(struct usb_hcd *hcd)
37{
38 /* The below GLs are according to the Orion Errata document */
39 /*
40 * Clear interrupt cause and mask
41 */
42 wrl(USB_CAUSE, 0);
43 wrl(USB_MASK, 0);
44
45 /*
46 * Reset controller
47 */
48 wrl(USB_CMD, rdl(USB_CMD) | 0x2);
49 while (rdl(USB_CMD) & 0x2);
50
51 /*
52 * GL# USB-10: Set IPG for non start of frame packets
53 * Bits[14:8]=0xc
54 */
55 wrl(USB_IPG, (rdl(USB_IPG) & ~0x7f00) | 0xc00);
56
57 /*
58 * GL# USB-9: USB 2.0 Power Control
59 * BG_VSEL[7:6]=0x1
60 */
61 wrl(USB_PHY_PWR_CTRL, (rdl(USB_PHY_PWR_CTRL) & ~0xc0)| 0x40);
62
63 /*
64 * GL# USB-1: USB PHY Tx Control - force calibration to '8'
65 * TXDATA_BLOCK_EN[21]=0x1, EXT_RCAL_EN[13]=0x1, IMP_CAL[6:3]=0x8
66 */
67 wrl(USB_PHY_TX_CTRL, (rdl(USB_PHY_TX_CTRL) & ~0x78) | 0x202040);
68
69 /*
70 * GL# USB-3 GL# USB-9: USB PHY Rx Control
71 * RXDATA_BLOCK_LENGHT[31:30]=0x3, EDGE_DET_SEL[27:26]=0,
72 * CDR_FASTLOCK_EN[21]=0, DISCON_THRESHOLD[9:8]=0, SQ_THRESH[7:4]=0x1
73 */
74 wrl(USB_PHY_RX_CTRL, (rdl(USB_PHY_RX_CTRL) & ~0xc2003f0) | 0xc0000010);
75
76 /*
77 * GL# USB-3 GL# USB-9: USB PHY IVREF Control
78 * PLLVDD12[1:0]=0x2, RXVDD[5:4]=0x3, Reserved[19]=0
79 */
80 wrl(USB_PHY_IVREF_CTRL, (rdl(USB_PHY_IVREF_CTRL) & ~0x80003 ) | 0x32);
81
82 /*
83 * GL# USB-3 GL# USB-9: USB PHY Test Group Control
84 * REG_FIFO_SQ_RST[15]=0
85 */
86 wrl(USB_PHY_TST_GRP_CTRL, rdl(USB_PHY_TST_GRP_CTRL) & ~0x8000);
87
88 /*
89 * Stop and reset controller
90 */
91 wrl(USB_CMD, rdl(USB_CMD) & ~0x1);
92 wrl(USB_CMD, rdl(USB_CMD) | 0x2);
93 while (rdl(USB_CMD) & 0x2);
94
95 /*
96 * GL# USB-5 Streaming disable REG_USB_MODE[4]=1
97 * TBD: This need to be done after each reset!
98 * GL# USB-4 Setup USB Host mode
99 */
100 wrl(USB_MODE, 0x13);
101}
102
103static int ehci_orion_setup(struct usb_hcd *hcd)
104{
105 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
106 int retval;
107
108 hcd->has_tt = 1;
109
110 retval = ehci_halt(ehci);
111 if (retval)
112 return retval;
113
114 /*
115 * data structure init
116 */
117 retval = ehci_init(hcd);
118 if (retval)
119 return retval;
120
121 ehci_reset(ehci);
122
123 ehci_port_power(ehci, 0);
124
125 return retval;
126}
127
128static const struct hc_driver ehci_orion_hc_driver = {
129 .description = hcd_name,
130 .product_desc = "Marvell Orion EHCI",
131 .hcd_priv_size = sizeof(struct ehci_hcd),
132
133 /*
134 * generic hardware linkage
135 */
136 .irq = ehci_irq,
137 .flags = HCD_MEMORY | HCD_USB2,
138
139 /*
140 * basic lifecycle operations
141 */
142 .reset = ehci_orion_setup,
143 .start = ehci_run,
144 .stop = ehci_stop,
145 .shutdown = ehci_shutdown,
146
147 /*
148 * managing i/o requests and associated device resources
149 */
150 .urb_enqueue = ehci_urb_enqueue,
151 .urb_dequeue = ehci_urb_dequeue,
152 .endpoint_disable = ehci_endpoint_disable,
153 .endpoint_reset = ehci_endpoint_reset,
154
155 /*
156 * scheduling support
157 */
158 .get_frame_number = ehci_get_frame,
159
160 /*
161 * root hub support
162 */
163 .hub_status_data = ehci_hub_status_data,
164 .hub_control = ehci_hub_control,
165 .bus_suspend = ehci_bus_suspend,
166 .bus_resume = ehci_bus_resume,
167 .relinquish_port = ehci_relinquish_port,
168 .port_handed_over = ehci_port_handed_over,
169
170 .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
171};
172
173static void __init
174ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
175 struct mbus_dram_target_info *dram)
176{
177 int i;
178
179 for (i = 0; i < 4; i++) {
180 wrl(USB_WINDOW_CTRL(i), 0);
181 wrl(USB_WINDOW_BASE(i), 0);
182 }
183
184 for (i = 0; i < dram->num_cs; i++) {
185 struct mbus_dram_window *cs = dram->cs + i;
186
187 wrl(USB_WINDOW_CTRL(i), ((cs->size - 1) & 0xffff0000) |
188 (cs->mbus_attr << 8) |
189 (dram->mbus_dram_target_id << 4) | 1);
190 wrl(USB_WINDOW_BASE(i), cs->base);
191 }
192}
193
194static int __devinit ehci_orion_drv_probe(struct platform_device *pdev)
195{
196 struct orion_ehci_data *pd = pdev->dev.platform_data;
197 struct resource *res;
198 struct usb_hcd *hcd;
199 struct ehci_hcd *ehci;
200 void __iomem *regs;
201 int irq, err;
202
203 if (usb_disabled())
204 return -ENODEV;
205
206 pr_debug("Initializing Orion-SoC USB Host Controller\n");
207
208 irq = platform_get_irq(pdev, 0);
209 if (irq <= 0) {
210 dev_err(&pdev->dev,
211 "Found HC with no IRQ. Check %s setup!\n",
212 dev_name(&pdev->dev));
213 err = -ENODEV;
214 goto err1;
215 }
216
217 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
218 if (!res) {
219 dev_err(&pdev->dev,
220 "Found HC with no register addr. Check %s setup!\n",
221 dev_name(&pdev->dev));
222 err = -ENODEV;
223 goto err1;
224 }
225
226 if (!request_mem_region(res->start, resource_size(res),
227 ehci_orion_hc_driver.description)) {
228 dev_dbg(&pdev->dev, "controller already in use\n");
229 err = -EBUSY;
230 goto err1;
231 }
232
233 regs = ioremap(res->start, resource_size(res));
234 if (regs == NULL) {
235 dev_dbg(&pdev->dev, "error mapping memory\n");
236 err = -EFAULT;
237 goto err2;
238 }
239
240 hcd = usb_create_hcd(&ehci_orion_hc_driver,
241 &pdev->dev, dev_name(&pdev->dev));
242 if (!hcd) {
243 err = -ENOMEM;
244 goto err3;
245 }
246
247 hcd->rsrc_start = res->start;
248 hcd->rsrc_len = resource_size(res);
249 hcd->regs = regs;
250
251 ehci = hcd_to_ehci(hcd);
252 ehci->caps = hcd->regs + 0x100;
253 ehci->regs = hcd->regs + 0x100 +
254 HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
255 ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
256 hcd->has_tt = 1;
257 ehci->sbrn = 0x20;
258
259 /*
260 * (Re-)program MBUS remapping windows if we are asked to.
261 */
262 if (pd != NULL && pd->dram != NULL)
263 ehci_orion_conf_mbus_windows(hcd, pd->dram);
264
265 /*
266 * setup Orion USB controller.
267 */
268 switch (pd->phy_version) {
269 case EHCI_PHY_NA: /* dont change USB phy settings */
270 break;
271 case EHCI_PHY_ORION:
272 orion_usb_phy_v1_setup(hcd);
273 break;
274 case EHCI_PHY_DD:
275 case EHCI_PHY_KW:
276 default:
277 printk(KERN_WARNING "Orion ehci -USB phy version isn't supported.\n");
278 }
279
280 err = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED);
281 if (err)
282 goto err4;
283
284 return 0;
285
286err4:
287 usb_put_hcd(hcd);
288err3:
289 iounmap(regs);
290err2:
291 release_mem_region(res->start, resource_size(res));
292err1:
293 dev_err(&pdev->dev, "init %s fail, %d\n",
294 dev_name(&pdev->dev), err);
295
296 return err;
297}
298
299static int __exit ehci_orion_drv_remove(struct platform_device *pdev)
300{
301 struct usb_hcd *hcd = platform_get_drvdata(pdev);
302
303 usb_remove_hcd(hcd);
304 iounmap(hcd->regs);
305 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
306 usb_put_hcd(hcd);
307
308 return 0;
309}
310
311MODULE_ALIAS("platform:orion-ehci");
312
313static struct platform_driver ehci_orion_driver = {
314 .probe = ehci_orion_drv_probe,
315 .remove = __exit_p(ehci_orion_drv_remove),
316 .shutdown = usb_hcd_platform_shutdown,
317 .driver.name = "orion-ehci",
318};
1/*
2 * drivers/usb/host/ehci-orion.c
3 *
4 * Tzachi Perelstein <tzachi@marvell.com>
5 *
6 * This file is licensed under the terms of the GNU General Public
7 * License version 2. This program is licensed "as is" without any
8 * warranty of any kind, whether express or implied.
9 */
10
11#include <linux/kernel.h>
12#include <linux/module.h>
13#include <linux/platform_device.h>
14#include <linux/mbus.h>
15#include <linux/clk.h>
16#include <plat/ehci-orion.h>
17
18#define rdl(off) __raw_readl(hcd->regs + (off))
19#define wrl(off, val) __raw_writel((val), hcd->regs + (off))
20
21#define USB_CMD 0x140
22#define USB_MODE 0x1a8
23#define USB_CAUSE 0x310
24#define USB_MASK 0x314
25#define USB_WINDOW_CTRL(i) (0x320 + ((i) << 4))
26#define USB_WINDOW_BASE(i) (0x324 + ((i) << 4))
27#define USB_IPG 0x360
28#define USB_PHY_PWR_CTRL 0x400
29#define USB_PHY_TX_CTRL 0x420
30#define USB_PHY_RX_CTRL 0x430
31#define USB_PHY_IVREF_CTRL 0x440
32#define USB_PHY_TST_GRP_CTRL 0x450
33
34/*
35 * Implement Orion USB controller specification guidelines
36 */
37static void orion_usb_phy_v1_setup(struct usb_hcd *hcd)
38{
39 /* The below GLs are according to the Orion Errata document */
40 /*
41 * Clear interrupt cause and mask
42 */
43 wrl(USB_CAUSE, 0);
44 wrl(USB_MASK, 0);
45
46 /*
47 * Reset controller
48 */
49 wrl(USB_CMD, rdl(USB_CMD) | 0x2);
50 while (rdl(USB_CMD) & 0x2);
51
52 /*
53 * GL# USB-10: Set IPG for non start of frame packets
54 * Bits[14:8]=0xc
55 */
56 wrl(USB_IPG, (rdl(USB_IPG) & ~0x7f00) | 0xc00);
57
58 /*
59 * GL# USB-9: USB 2.0 Power Control
60 * BG_VSEL[7:6]=0x1
61 */
62 wrl(USB_PHY_PWR_CTRL, (rdl(USB_PHY_PWR_CTRL) & ~0xc0)| 0x40);
63
64 /*
65 * GL# USB-1: USB PHY Tx Control - force calibration to '8'
66 * TXDATA_BLOCK_EN[21]=0x1, EXT_RCAL_EN[13]=0x1, IMP_CAL[6:3]=0x8
67 */
68 wrl(USB_PHY_TX_CTRL, (rdl(USB_PHY_TX_CTRL) & ~0x78) | 0x202040);
69
70 /*
71 * GL# USB-3 GL# USB-9: USB PHY Rx Control
72 * RXDATA_BLOCK_LENGHT[31:30]=0x3, EDGE_DET_SEL[27:26]=0,
73 * CDR_FASTLOCK_EN[21]=0, DISCON_THRESHOLD[9:8]=0, SQ_THRESH[7:4]=0x1
74 */
75 wrl(USB_PHY_RX_CTRL, (rdl(USB_PHY_RX_CTRL) & ~0xc2003f0) | 0xc0000010);
76
77 /*
78 * GL# USB-3 GL# USB-9: USB PHY IVREF Control
79 * PLLVDD12[1:0]=0x2, RXVDD[5:4]=0x3, Reserved[19]=0
80 */
81 wrl(USB_PHY_IVREF_CTRL, (rdl(USB_PHY_IVREF_CTRL) & ~0x80003 ) | 0x32);
82
83 /*
84 * GL# USB-3 GL# USB-9: USB PHY Test Group Control
85 * REG_FIFO_SQ_RST[15]=0
86 */
87 wrl(USB_PHY_TST_GRP_CTRL, rdl(USB_PHY_TST_GRP_CTRL) & ~0x8000);
88
89 /*
90 * Stop and reset controller
91 */
92 wrl(USB_CMD, rdl(USB_CMD) & ~0x1);
93 wrl(USB_CMD, rdl(USB_CMD) | 0x2);
94 while (rdl(USB_CMD) & 0x2);
95
96 /*
97 * GL# USB-5 Streaming disable REG_USB_MODE[4]=1
98 * TBD: This need to be done after each reset!
99 * GL# USB-4 Setup USB Host mode
100 */
101 wrl(USB_MODE, 0x13);
102}
103
104static int ehci_orion_setup(struct usb_hcd *hcd)
105{
106 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
107 int retval;
108
109 hcd->has_tt = 1;
110
111 retval = ehci_halt(ehci);
112 if (retval)
113 return retval;
114
115 /*
116 * data structure init
117 */
118 retval = ehci_init(hcd);
119 if (retval)
120 return retval;
121
122 ehci_reset(ehci);
123
124 ehci_port_power(ehci, 0);
125
126 return retval;
127}
128
129static const struct hc_driver ehci_orion_hc_driver = {
130 .description = hcd_name,
131 .product_desc = "Marvell Orion EHCI",
132 .hcd_priv_size = sizeof(struct ehci_hcd),
133
134 /*
135 * generic hardware linkage
136 */
137 .irq = ehci_irq,
138 .flags = HCD_MEMORY | HCD_USB2,
139
140 /*
141 * basic lifecycle operations
142 */
143 .reset = ehci_orion_setup,
144 .start = ehci_run,
145 .stop = ehci_stop,
146 .shutdown = ehci_shutdown,
147
148 /*
149 * managing i/o requests and associated device resources
150 */
151 .urb_enqueue = ehci_urb_enqueue,
152 .urb_dequeue = ehci_urb_dequeue,
153 .endpoint_disable = ehci_endpoint_disable,
154 .endpoint_reset = ehci_endpoint_reset,
155
156 /*
157 * scheduling support
158 */
159 .get_frame_number = ehci_get_frame,
160
161 /*
162 * root hub support
163 */
164 .hub_status_data = ehci_hub_status_data,
165 .hub_control = ehci_hub_control,
166 .bus_suspend = ehci_bus_suspend,
167 .bus_resume = ehci_bus_resume,
168 .relinquish_port = ehci_relinquish_port,
169 .port_handed_over = ehci_port_handed_over,
170
171 .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
172};
173
174static void __init
175ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
176 const struct mbus_dram_target_info *dram)
177{
178 int i;
179
180 for (i = 0; i < 4; i++) {
181 wrl(USB_WINDOW_CTRL(i), 0);
182 wrl(USB_WINDOW_BASE(i), 0);
183 }
184
185 for (i = 0; i < dram->num_cs; i++) {
186 const struct mbus_dram_window *cs = dram->cs + i;
187
188 wrl(USB_WINDOW_CTRL(i), ((cs->size - 1) & 0xffff0000) |
189 (cs->mbus_attr << 8) |
190 (dram->mbus_dram_target_id << 4) | 1);
191 wrl(USB_WINDOW_BASE(i), cs->base);
192 }
193}
194
195static int __devinit ehci_orion_drv_probe(struct platform_device *pdev)
196{
197 struct orion_ehci_data *pd = pdev->dev.platform_data;
198 const struct mbus_dram_target_info *dram;
199 struct resource *res;
200 struct usb_hcd *hcd;
201 struct ehci_hcd *ehci;
202 struct clk *clk;
203 void __iomem *regs;
204 int irq, err;
205
206 if (usb_disabled())
207 return -ENODEV;
208
209 pr_debug("Initializing Orion-SoC USB Host Controller\n");
210
211 irq = platform_get_irq(pdev, 0);
212 if (irq <= 0) {
213 dev_err(&pdev->dev,
214 "Found HC with no IRQ. Check %s setup!\n",
215 dev_name(&pdev->dev));
216 err = -ENODEV;
217 goto err1;
218 }
219
220 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
221 if (!res) {
222 dev_err(&pdev->dev,
223 "Found HC with no register addr. Check %s setup!\n",
224 dev_name(&pdev->dev));
225 err = -ENODEV;
226 goto err1;
227 }
228
229 if (!request_mem_region(res->start, resource_size(res),
230 ehci_orion_hc_driver.description)) {
231 dev_dbg(&pdev->dev, "controller already in use\n");
232 err = -EBUSY;
233 goto err1;
234 }
235
236 regs = ioremap(res->start, resource_size(res));
237 if (regs == NULL) {
238 dev_dbg(&pdev->dev, "error mapping memory\n");
239 err = -EFAULT;
240 goto err2;
241 }
242
243 /* Not all platforms can gate the clock, so it is not
244 an error if the clock does not exists. */
245 clk = clk_get(&pdev->dev, NULL);
246 if (!IS_ERR(clk)) {
247 clk_prepare_enable(clk);
248 clk_put(clk);
249 }
250
251 hcd = usb_create_hcd(&ehci_orion_hc_driver,
252 &pdev->dev, dev_name(&pdev->dev));
253 if (!hcd) {
254 err = -ENOMEM;
255 goto err3;
256 }
257
258 hcd->rsrc_start = res->start;
259 hcd->rsrc_len = resource_size(res);
260 hcd->regs = regs;
261
262 ehci = hcd_to_ehci(hcd);
263 ehci->caps = hcd->regs + 0x100;
264 ehci->regs = hcd->regs + 0x100 +
265 HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
266 ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
267 hcd->has_tt = 1;
268 ehci->sbrn = 0x20;
269
270 /*
271 * (Re-)program MBUS remapping windows if we are asked to.
272 */
273 dram = mv_mbus_dram_info();
274 if (dram)
275 ehci_orion_conf_mbus_windows(hcd, dram);
276
277 /*
278 * setup Orion USB controller.
279 */
280 switch (pd->phy_version) {
281 case EHCI_PHY_NA: /* dont change USB phy settings */
282 break;
283 case EHCI_PHY_ORION:
284 orion_usb_phy_v1_setup(hcd);
285 break;
286 case EHCI_PHY_DD:
287 case EHCI_PHY_KW:
288 default:
289 printk(KERN_WARNING "Orion ehci -USB phy version isn't supported.\n");
290 }
291
292 err = usb_add_hcd(hcd, irq, IRQF_SHARED);
293 if (err)
294 goto err4;
295
296 return 0;
297
298err4:
299 usb_put_hcd(hcd);
300err3:
301 iounmap(regs);
302err2:
303 release_mem_region(res->start, resource_size(res));
304err1:
305 dev_err(&pdev->dev, "init %s fail, %d\n",
306 dev_name(&pdev->dev), err);
307
308 return err;
309}
310
311static int __exit ehci_orion_drv_remove(struct platform_device *pdev)
312{
313 struct usb_hcd *hcd = platform_get_drvdata(pdev);
314 struct clk *clk;
315
316 usb_remove_hcd(hcd);
317 iounmap(hcd->regs);
318 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
319 usb_put_hcd(hcd);
320
321 clk = clk_get(&pdev->dev, NULL);
322 if (!IS_ERR(clk)) {
323 clk_disable_unprepare(clk);
324 clk_put(clk);
325 }
326 return 0;
327}
328
329MODULE_ALIAS("platform:orion-ehci");
330
331static struct platform_driver ehci_orion_driver = {
332 .probe = ehci_orion_drv_probe,
333 .remove = __exit_p(ehci_orion_drv_remove),
334 .shutdown = usb_hcd_platform_shutdown,
335 .driver.name = "orion-ehci",
336};