Loading...
Note: File does not exist in v3.1.
1#if defined(CONFIG_SERIAL_EFM32_UART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
2#define SUPPORT_SYSRQ
3#endif
4
5#include <linux/kernel.h>
6#include <linux/module.h>
7#include <linux/io.h>
8#include <linux/platform_device.h>
9#include <linux/console.h>
10#include <linux/sysrq.h>
11#include <linux/serial_core.h>
12#include <linux/tty_flip.h>
13#include <linux/slab.h>
14#include <linux/clk.h>
15#include <linux/of.h>
16#include <linux/of_device.h>
17
18#include <linux/platform_data/efm32-uart.h>
19
20#define DRIVER_NAME "efm32-uart"
21#define DEV_NAME "ttyefm"
22
23#define UARTn_CTRL 0x00
24#define UARTn_CTRL_SYNC 0x0001
25#define UARTn_CTRL_TXBIL 0x1000
26
27#define UARTn_FRAME 0x04
28#define UARTn_FRAME_DATABITS__MASK 0x000f
29#define UARTn_FRAME_DATABITS(n) ((n) - 3)
30#define UARTn_FRAME_PARITY_NONE 0x0000
31#define UARTn_FRAME_PARITY_EVEN 0x0200
32#define UARTn_FRAME_PARITY_ODD 0x0300
33#define UARTn_FRAME_STOPBITS_HALF 0x0000
34#define UARTn_FRAME_STOPBITS_ONE 0x1000
35#define UARTn_FRAME_STOPBITS_TWO 0x3000
36
37#define UARTn_CMD 0x0c
38#define UARTn_CMD_RXEN 0x0001
39#define UARTn_CMD_RXDIS 0x0002
40#define UARTn_CMD_TXEN 0x0004
41#define UARTn_CMD_TXDIS 0x0008
42
43#define UARTn_STATUS 0x10
44#define UARTn_STATUS_TXENS 0x0002
45#define UARTn_STATUS_TXC 0x0020
46#define UARTn_STATUS_TXBL 0x0040
47#define UARTn_STATUS_RXDATAV 0x0080
48
49#define UARTn_CLKDIV 0x14
50
51#define UARTn_RXDATAX 0x18
52#define UARTn_RXDATAX_RXDATA__MASK 0x01ff
53#define UARTn_RXDATAX_PERR 0x4000
54#define UARTn_RXDATAX_FERR 0x8000
55/*
56 * This is a software only flag used for ignore_status_mask and
57 * read_status_mask! It's used for breaks that the hardware doesn't report
58 * explicitly.
59 */
60#define SW_UARTn_RXDATAX_BERR 0x2000
61
62#define UARTn_TXDATA 0x34
63
64#define UARTn_IF 0x40
65#define UARTn_IF_TXC 0x0001
66#define UARTn_IF_TXBL 0x0002
67#define UARTn_IF_RXDATAV 0x0004
68#define UARTn_IF_RXOF 0x0010
69
70#define UARTn_IFS 0x44
71#define UARTn_IFC 0x48
72#define UARTn_IEN 0x4c
73
74#define UARTn_ROUTE 0x54
75#define UARTn_ROUTE_LOCATION__MASK 0x0700
76#define UARTn_ROUTE_LOCATION(n) (((n) << 8) & UARTn_ROUTE_LOCATION__MASK)
77#define UARTn_ROUTE_RXPEN 0x0001
78#define UARTn_ROUTE_TXPEN 0x0002
79
80struct efm32_uart_port {
81 struct uart_port port;
82 unsigned int txirq;
83 struct clk *clk;
84};
85#define to_efm_port(_port) container_of(_port, struct efm32_uart_port, port)
86#define efm_debug(efm_port, format, arg...) \
87 dev_dbg(efm_port->port.dev, format, ##arg)
88
89static void efm32_uart_write32(struct efm32_uart_port *efm_port,
90 u32 value, unsigned offset)
91{
92 writel_relaxed(value, efm_port->port.membase + offset);
93}
94
95static u32 efm32_uart_read32(struct efm32_uart_port *efm_port,
96 unsigned offset)
97{
98 return readl_relaxed(efm_port->port.membase + offset);
99}
100
101static unsigned int efm32_uart_tx_empty(struct uart_port *port)
102{
103 struct efm32_uart_port *efm_port = to_efm_port(port);
104 u32 status = efm32_uart_read32(efm_port, UARTn_STATUS);
105
106 if (status & UARTn_STATUS_TXC)
107 return TIOCSER_TEMT;
108 else
109 return 0;
110}
111
112static void efm32_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
113{
114 /* sorry, neither handshaking lines nor loop functionallity */
115}
116
117static unsigned int efm32_uart_get_mctrl(struct uart_port *port)
118{
119 /* sorry, no handshaking lines available */
120 return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR;
121}
122
123static void efm32_uart_stop_tx(struct uart_port *port)
124{
125 struct efm32_uart_port *efm_port = to_efm_port(port);
126 u32 ien = efm32_uart_read32(efm_port, UARTn_IEN);
127
128 efm32_uart_write32(efm_port, UARTn_CMD_TXDIS, UARTn_CMD);
129 ien &= ~(UARTn_IF_TXC | UARTn_IF_TXBL);
130 efm32_uart_write32(efm_port, ien, UARTn_IEN);
131}
132
133static void efm32_uart_tx_chars(struct efm32_uart_port *efm_port)
134{
135 struct uart_port *port = &efm_port->port;
136 struct circ_buf *xmit = &port->state->xmit;
137
138 while (efm32_uart_read32(efm_port, UARTn_STATUS) &
139 UARTn_STATUS_TXBL) {
140 if (port->x_char) {
141 port->icount.tx++;
142 efm32_uart_write32(efm_port, port->x_char,
143 UARTn_TXDATA);
144 port->x_char = 0;
145 continue;
146 }
147 if (!uart_circ_empty(xmit) && !uart_tx_stopped(port)) {
148 port->icount.tx++;
149 efm32_uart_write32(efm_port, xmit->buf[xmit->tail],
150 UARTn_TXDATA);
151 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
152 } else
153 break;
154 }
155
156 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
157 uart_write_wakeup(port);
158
159 if (!port->x_char && uart_circ_empty(xmit) &&
160 efm32_uart_read32(efm_port, UARTn_STATUS) &
161 UARTn_STATUS_TXC)
162 efm32_uart_stop_tx(port);
163}
164
165static void efm32_uart_start_tx(struct uart_port *port)
166{
167 struct efm32_uart_port *efm_port = to_efm_port(port);
168 u32 ien;
169
170 efm32_uart_write32(efm_port,
171 UARTn_IF_TXBL | UARTn_IF_TXC, UARTn_IFC);
172 ien = efm32_uart_read32(efm_port, UARTn_IEN);
173 efm32_uart_write32(efm_port,
174 ien | UARTn_IF_TXBL | UARTn_IF_TXC, UARTn_IEN);
175 efm32_uart_write32(efm_port, UARTn_CMD_TXEN, UARTn_CMD);
176
177 efm32_uart_tx_chars(efm_port);
178}
179
180static void efm32_uart_stop_rx(struct uart_port *port)
181{
182 struct efm32_uart_port *efm_port = to_efm_port(port);
183
184 efm32_uart_write32(efm_port, UARTn_CMD_RXDIS, UARTn_CMD);
185}
186
187static void efm32_uart_enable_ms(struct uart_port *port)
188{
189 /* no handshake lines, no modem status interrupts */
190}
191
192static void efm32_uart_break_ctl(struct uart_port *port, int ctl)
193{
194 /* not possible without fiddling with gpios */
195}
196
197static void efm32_uart_rx_chars(struct efm32_uart_port *efm_port,
198 struct tty_struct *tty)
199{
200 struct uart_port *port = &efm_port->port;
201
202 while (efm32_uart_read32(efm_port, UARTn_STATUS) &
203 UARTn_STATUS_RXDATAV) {
204 u32 rxdata = efm32_uart_read32(efm_port, UARTn_RXDATAX);
205 int flag = 0;
206
207 /*
208 * This is a reserved bit and I only saw it read as 0. But to be
209 * sure not to be confused too much by new devices adhere to the
210 * warning in the reference manual that reserverd bits might
211 * read as 1 in the future.
212 */
213 rxdata &= ~SW_UARTn_RXDATAX_BERR;
214
215 port->icount.rx++;
216
217 if ((rxdata & UARTn_RXDATAX_FERR) &&
218 !(rxdata & UARTn_RXDATAX_RXDATA__MASK)) {
219 rxdata |= SW_UARTn_RXDATAX_BERR;
220 port->icount.brk++;
221 if (uart_handle_break(port))
222 continue;
223 } else if (rxdata & UARTn_RXDATAX_PERR)
224 port->icount.parity++;
225 else if (rxdata & UARTn_RXDATAX_FERR)
226 port->icount.frame++;
227
228 rxdata &= port->read_status_mask;
229
230 if (rxdata & SW_UARTn_RXDATAX_BERR)
231 flag = TTY_BREAK;
232 else if (rxdata & UARTn_RXDATAX_PERR)
233 flag = TTY_PARITY;
234 else if (rxdata & UARTn_RXDATAX_FERR)
235 flag = TTY_FRAME;
236 else if (uart_handle_sysrq_char(port,
237 rxdata & UARTn_RXDATAX_RXDATA__MASK))
238 continue;
239
240 if (tty && (rxdata & port->ignore_status_mask) == 0)
241 tty_insert_flip_char(tty,
242 rxdata & UARTn_RXDATAX_RXDATA__MASK, flag);
243 }
244}
245
246static irqreturn_t efm32_uart_rxirq(int irq, void *data)
247{
248 struct efm32_uart_port *efm_port = data;
249 u32 irqflag = efm32_uart_read32(efm_port, UARTn_IF);
250 int handled = IRQ_NONE;
251 struct uart_port *port = &efm_port->port;
252 struct tty_struct *tty;
253
254 spin_lock(&port->lock);
255
256 tty = tty_kref_get(port->state->port.tty);
257
258 if (irqflag & UARTn_IF_RXDATAV) {
259 efm32_uart_write32(efm_port, UARTn_IF_RXDATAV, UARTn_IFC);
260 efm32_uart_rx_chars(efm_port, tty);
261
262 handled = IRQ_HANDLED;
263 }
264
265 if (irqflag & UARTn_IF_RXOF) {
266 efm32_uart_write32(efm_port, UARTn_IF_RXOF, UARTn_IFC);
267 port->icount.overrun++;
268 if (tty)
269 tty_insert_flip_char(tty, 0, TTY_OVERRUN);
270
271 handled = IRQ_HANDLED;
272 }
273
274 if (tty) {
275 tty_flip_buffer_push(tty);
276 tty_kref_put(tty);
277 }
278
279 spin_unlock(&port->lock);
280
281 return handled;
282}
283
284static irqreturn_t efm32_uart_txirq(int irq, void *data)
285{
286 struct efm32_uart_port *efm_port = data;
287 u32 irqflag = efm32_uart_read32(efm_port, UARTn_IF);
288
289 /* TXBL doesn't need to be cleared */
290 if (irqflag & UARTn_IF_TXC)
291 efm32_uart_write32(efm_port, UARTn_IF_TXC, UARTn_IFC);
292
293 if (irqflag & (UARTn_IF_TXC | UARTn_IF_TXBL)) {
294 efm32_uart_tx_chars(efm_port);
295 return IRQ_HANDLED;
296 } else
297 return IRQ_NONE;
298}
299
300static int efm32_uart_startup(struct uart_port *port)
301{
302 struct efm32_uart_port *efm_port = to_efm_port(port);
303 u32 location = 0;
304 struct efm32_uart_pdata *pdata = dev_get_platdata(port->dev);
305 int ret;
306
307 if (pdata)
308 location = UARTn_ROUTE_LOCATION(pdata->location);
309
310 ret = clk_enable(efm_port->clk);
311 if (ret) {
312 efm_debug(efm_port, "failed to enable clk\n");
313 goto err_clk_enable;
314 }
315 port->uartclk = clk_get_rate(efm_port->clk);
316
317 /* Enable pins at configured location */
318 efm32_uart_write32(efm_port, location | UARTn_ROUTE_RXPEN | UARTn_ROUTE_TXPEN,
319 UARTn_ROUTE);
320
321 ret = request_irq(port->irq, efm32_uart_rxirq, 0,
322 DRIVER_NAME, efm_port);
323 if (ret) {
324 efm_debug(efm_port, "failed to register rxirq\n");
325 goto err_request_irq_rx;
326 }
327
328 /* disable all irqs */
329 efm32_uart_write32(efm_port, 0, UARTn_IEN);
330
331 ret = request_irq(efm_port->txirq, efm32_uart_txirq, 0,
332 DRIVER_NAME, efm_port);
333 if (ret) {
334 efm_debug(efm_port, "failed to register txirq\n");
335 free_irq(port->irq, efm_port);
336err_request_irq_rx:
337
338 clk_disable(efm_port->clk);
339 } else {
340 efm32_uart_write32(efm_port,
341 UARTn_IF_RXDATAV | UARTn_IF_RXOF, UARTn_IEN);
342 efm32_uart_write32(efm_port, UARTn_CMD_RXEN, UARTn_CMD);
343 }
344
345err_clk_enable:
346 return ret;
347}
348
349static void efm32_uart_shutdown(struct uart_port *port)
350{
351 struct efm32_uart_port *efm_port = to_efm_port(port);
352
353 efm32_uart_write32(efm_port, 0, UARTn_IEN);
354 free_irq(port->irq, efm_port);
355
356 clk_disable(efm_port->clk);
357}
358
359static void efm32_uart_set_termios(struct uart_port *port,
360 struct ktermios *new, struct ktermios *old)
361{
362 struct efm32_uart_port *efm_port = to_efm_port(port);
363 unsigned long flags;
364 unsigned baud;
365 u32 clkdiv;
366 u32 frame = 0;
367
368 /* no modem control lines */
369 new->c_cflag &= ~(CRTSCTS | CMSPAR);
370
371 baud = uart_get_baud_rate(port, new, old,
372 DIV_ROUND_CLOSEST(port->uartclk, 16 * 8192),
373 DIV_ROUND_CLOSEST(port->uartclk, 16));
374
375 switch (new->c_cflag & CSIZE) {
376 case CS5:
377 frame |= UARTn_FRAME_DATABITS(5);
378 break;
379 case CS6:
380 frame |= UARTn_FRAME_DATABITS(6);
381 break;
382 case CS7:
383 frame |= UARTn_FRAME_DATABITS(7);
384 break;
385 case CS8:
386 frame |= UARTn_FRAME_DATABITS(8);
387 break;
388 }
389
390 if (new->c_cflag & CSTOPB)
391 /* the receiver only verifies the first stop bit */
392 frame |= UARTn_FRAME_STOPBITS_TWO;
393 else
394 frame |= UARTn_FRAME_STOPBITS_ONE;
395
396 if (new->c_cflag & PARENB) {
397 if (new->c_cflag & PARODD)
398 frame |= UARTn_FRAME_PARITY_ODD;
399 else
400 frame |= UARTn_FRAME_PARITY_EVEN;
401 } else
402 frame |= UARTn_FRAME_PARITY_NONE;
403
404 /*
405 * the 6 lowest bits of CLKDIV are dc, bit 6 has value 0.25.
406 * port->uartclk <= 14e6, so 4 * port->uartclk doesn't overflow.
407 */
408 clkdiv = (DIV_ROUND_CLOSEST(4 * port->uartclk, 16 * baud) - 4) << 6;
409
410 spin_lock_irqsave(&port->lock, flags);
411
412 efm32_uart_write32(efm_port,
413 UARTn_CMD_TXDIS | UARTn_CMD_RXDIS, UARTn_CMD);
414
415 port->read_status_mask = UARTn_RXDATAX_RXDATA__MASK;
416 if (new->c_iflag & INPCK)
417 port->read_status_mask |=
418 UARTn_RXDATAX_FERR | UARTn_RXDATAX_PERR;
419 if (new->c_iflag & (BRKINT | PARMRK))
420 port->read_status_mask |= SW_UARTn_RXDATAX_BERR;
421
422 port->ignore_status_mask = 0;
423 if (new->c_iflag & IGNPAR)
424 port->ignore_status_mask |=
425 UARTn_RXDATAX_FERR | UARTn_RXDATAX_PERR;
426 if (new->c_iflag & IGNBRK)
427 port->ignore_status_mask |= SW_UARTn_RXDATAX_BERR;
428
429 uart_update_timeout(port, new->c_cflag, baud);
430
431 efm32_uart_write32(efm_port, UARTn_CTRL_TXBIL, UARTn_CTRL);
432 efm32_uart_write32(efm_port, frame, UARTn_FRAME);
433 efm32_uart_write32(efm_port, clkdiv, UARTn_CLKDIV);
434
435 efm32_uart_write32(efm_port, UARTn_CMD_TXEN | UARTn_CMD_RXEN,
436 UARTn_CMD);
437
438 spin_unlock_irqrestore(&port->lock, flags);
439}
440
441static const char *efm32_uart_type(struct uart_port *port)
442{
443 return port->type == PORT_EFMUART ? "efm32-uart" : NULL;
444}
445
446static void efm32_uart_release_port(struct uart_port *port)
447{
448 struct efm32_uart_port *efm_port = to_efm_port(port);
449
450 clk_unprepare(efm_port->clk);
451 clk_put(efm_port->clk);
452 iounmap(port->membase);
453}
454
455static int efm32_uart_request_port(struct uart_port *port)
456{
457 struct efm32_uart_port *efm_port = to_efm_port(port);
458 int ret;
459
460 port->membase = ioremap(port->mapbase, 60);
461 if (!efm_port->port.membase) {
462 ret = -ENOMEM;
463 efm_debug(efm_port, "failed to remap\n");
464 goto err_ioremap;
465 }
466
467 efm_port->clk = clk_get(port->dev, NULL);
468 if (IS_ERR(efm_port->clk)) {
469 ret = PTR_ERR(efm_port->clk);
470 efm_debug(efm_port, "failed to get clock\n");
471 goto err_clk_get;
472 }
473
474 ret = clk_prepare(efm_port->clk);
475 if (ret) {
476 clk_put(efm_port->clk);
477err_clk_get:
478
479 iounmap(port->membase);
480err_ioremap:
481 return ret;
482 }
483 return 0;
484}
485
486static void efm32_uart_config_port(struct uart_port *port, int type)
487{
488 if (type & UART_CONFIG_TYPE &&
489 !efm32_uart_request_port(port))
490 port->type = PORT_EFMUART;
491}
492
493static int efm32_uart_verify_port(struct uart_port *port,
494 struct serial_struct *serinfo)
495{
496 int ret = 0;
497
498 if (serinfo->type != PORT_UNKNOWN && serinfo->type != PORT_EFMUART)
499 ret = -EINVAL;
500
501 return ret;
502}
503
504static struct uart_ops efm32_uart_pops = {
505 .tx_empty = efm32_uart_tx_empty,
506 .set_mctrl = efm32_uart_set_mctrl,
507 .get_mctrl = efm32_uart_get_mctrl,
508 .stop_tx = efm32_uart_stop_tx,
509 .start_tx = efm32_uart_start_tx,
510 .stop_rx = efm32_uart_stop_rx,
511 .enable_ms = efm32_uart_enable_ms,
512 .break_ctl = efm32_uart_break_ctl,
513 .startup = efm32_uart_startup,
514 .shutdown = efm32_uart_shutdown,
515 .set_termios = efm32_uart_set_termios,
516 .type = efm32_uart_type,
517 .release_port = efm32_uart_release_port,
518 .request_port = efm32_uart_request_port,
519 .config_port = efm32_uart_config_port,
520 .verify_port = efm32_uart_verify_port,
521};
522
523static struct efm32_uart_port *efm32_uart_ports[5];
524
525#ifdef CONFIG_SERIAL_EFM32_UART_CONSOLE
526static void efm32_uart_console_putchar(struct uart_port *port, int ch)
527{
528 struct efm32_uart_port *efm_port = to_efm_port(port);
529 unsigned int timeout = 0x400;
530 u32 status;
531
532 while (1) {
533 status = efm32_uart_read32(efm_port, UARTn_STATUS);
534
535 if (status & UARTn_STATUS_TXBL)
536 break;
537 if (!timeout--)
538 return;
539 }
540 efm32_uart_write32(efm_port, ch, UARTn_TXDATA);
541}
542
543static void efm32_uart_console_write(struct console *co, const char *s,
544 unsigned int count)
545{
546 struct efm32_uart_port *efm_port = efm32_uart_ports[co->index];
547 u32 status = efm32_uart_read32(efm_port, UARTn_STATUS);
548 unsigned int timeout = 0x400;
549
550 if (!(status & UARTn_STATUS_TXENS))
551 efm32_uart_write32(efm_port, UARTn_CMD_TXEN, UARTn_CMD);
552
553 uart_console_write(&efm_port->port, s, count,
554 efm32_uart_console_putchar);
555
556 /* Wait for the transmitter to become empty */
557 while (1) {
558 u32 status = efm32_uart_read32(efm_port, UARTn_STATUS);
559 if (status & UARTn_STATUS_TXC)
560 break;
561 if (!timeout--)
562 break;
563 }
564
565 if (!(status & UARTn_STATUS_TXENS))
566 efm32_uart_write32(efm_port, UARTn_CMD_TXDIS, UARTn_CMD);
567}
568
569static void efm32_uart_console_get_options(struct efm32_uart_port *efm_port,
570 int *baud, int *parity, int *bits)
571{
572 u32 ctrl = efm32_uart_read32(efm_port, UARTn_CTRL);
573 u32 route, clkdiv, frame;
574
575 if (ctrl & UARTn_CTRL_SYNC)
576 /* not operating in async mode */
577 return;
578
579 route = efm32_uart_read32(efm_port, UARTn_ROUTE);
580 if (!(route & UARTn_ROUTE_TXPEN))
581 /* tx pin not routed */
582 return;
583
584 clkdiv = efm32_uart_read32(efm_port, UARTn_CLKDIV);
585
586 *baud = DIV_ROUND_CLOSEST(4 * efm_port->port.uartclk,
587 16 * (4 + (clkdiv >> 6)));
588
589 frame = efm32_uart_read32(efm_port, UARTn_FRAME);
590 if (frame & UARTn_FRAME_PARITY_ODD)
591 *parity = 'o';
592 else if (frame & UARTn_FRAME_PARITY_EVEN)
593 *parity = 'e';
594 else
595 *parity = 'n';
596
597 *bits = (frame & UARTn_FRAME_DATABITS__MASK) -
598 UARTn_FRAME_DATABITS(4) + 4;
599
600 efm_debug(efm_port, "get_opts: options=%d%c%d\n",
601 *baud, *parity, *bits);
602}
603
604static int efm32_uart_console_setup(struct console *co, char *options)
605{
606 struct efm32_uart_port *efm_port;
607 int baud = 115200;
608 int bits = 8;
609 int parity = 'n';
610 int flow = 'n';
611 int ret;
612
613 if (co->index < 0 || co->index >= ARRAY_SIZE(efm32_uart_ports)) {
614 unsigned i;
615 for (i = 0; i < ARRAY_SIZE(efm32_uart_ports); ++i) {
616 if (efm32_uart_ports[i]) {
617 pr_warn("efm32-console: fall back to console index %u (from %hhi)\n",
618 i, co->index);
619 co->index = i;
620 break;
621 }
622 }
623 }
624
625 efm_port = efm32_uart_ports[co->index];
626 if (!efm_port) {
627 pr_warn("efm32-console: No port at %d\n", co->index);
628 return -ENODEV;
629 }
630
631 ret = clk_prepare(efm_port->clk);
632 if (ret) {
633 dev_warn(efm_port->port.dev,
634 "console: clk_prepare failed: %d\n", ret);
635 return ret;
636 }
637
638 efm_port->port.uartclk = clk_get_rate(efm_port->clk);
639
640 if (options)
641 uart_parse_options(options, &baud, &parity, &bits, &flow);
642 else
643 efm32_uart_console_get_options(efm_port,
644 &baud, &parity, &bits);
645
646 return uart_set_options(&efm_port->port, co, baud, parity, bits, flow);
647}
648
649static struct uart_driver efm32_uart_reg;
650
651static struct console efm32_uart_console = {
652 .name = DEV_NAME,
653 .write = efm32_uart_console_write,
654 .device = uart_console_device,
655 .setup = efm32_uart_console_setup,
656 .flags = CON_PRINTBUFFER,
657 .index = -1,
658 .data = &efm32_uart_reg,
659};
660
661#else
662#define efm32_uart_console (*(struct console *)NULL)
663#endif /* ifdef CONFIG_SERIAL_EFM32_UART_CONSOLE / else */
664
665static struct uart_driver efm32_uart_reg = {
666 .owner = THIS_MODULE,
667 .driver_name = DRIVER_NAME,
668 .dev_name = DEV_NAME,
669 .nr = ARRAY_SIZE(efm32_uart_ports),
670 .cons = &efm32_uart_console,
671};
672
673static int efm32_uart_probe_dt(struct platform_device *pdev,
674 struct efm32_uart_port *efm_port)
675{
676 struct device_node *np = pdev->dev.of_node;
677 int ret;
678
679 if (!np)
680 return 1;
681
682 ret = of_alias_get_id(np, "serial");
683 if (ret < 0) {
684 dev_err(&pdev->dev, "failed to get alias id: %d\n", ret);
685 return ret;
686 } else {
687 efm_port->port.line = ret;
688 return 0;
689 }
690
691}
692
693static int __devinit efm32_uart_probe(struct platform_device *pdev)
694{
695 struct efm32_uart_port *efm_port;
696 struct resource *res;
697 int ret;
698
699 efm_port = kzalloc(sizeof(*efm_port), GFP_KERNEL);
700 if (!efm_port) {
701 dev_dbg(&pdev->dev, "failed to allocate private data\n");
702 return -ENOMEM;
703 }
704
705 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
706 if (!res) {
707 ret = -ENODEV;
708 dev_dbg(&pdev->dev, "failed to determine base address\n");
709 goto err_get_base;
710 }
711
712 if (resource_size(res) < 60) {
713 ret = -EINVAL;
714 dev_dbg(&pdev->dev, "memory resource too small\n");
715 goto err_too_small;
716 }
717
718 ret = platform_get_irq(pdev, 0);
719 if (ret <= 0) {
720 dev_dbg(&pdev->dev, "failed to get rx irq\n");
721 goto err_get_rxirq;
722 }
723
724 efm_port->port.irq = ret;
725
726 ret = platform_get_irq(pdev, 1);
727 if (ret <= 0)
728 ret = efm_port->port.irq + 1;
729
730 efm_port->txirq = ret;
731
732 efm_port->port.dev = &pdev->dev;
733 efm_port->port.mapbase = res->start;
734 efm_port->port.type = PORT_EFMUART;
735 efm_port->port.iotype = UPIO_MEM32;
736 efm_port->port.fifosize = 2;
737 efm_port->port.ops = &efm32_uart_pops;
738 efm_port->port.flags = UPF_BOOT_AUTOCONF;
739
740 ret = efm32_uart_probe_dt(pdev, efm_port);
741 if (ret > 0)
742 /* not created by device tree */
743 efm_port->port.line = pdev->id;
744
745 if (efm_port->port.line >= 0 &&
746 efm_port->port.line < ARRAY_SIZE(efm32_uart_ports))
747 efm32_uart_ports[efm_port->port.line] = efm_port;
748
749 ret = uart_add_one_port(&efm32_uart_reg, &efm_port->port);
750 if (ret) {
751 dev_dbg(&pdev->dev, "failed to add port: %d\n", ret);
752
753 if (pdev->id >= 0 && pdev->id < ARRAY_SIZE(efm32_uart_ports))
754 efm32_uart_ports[pdev->id] = NULL;
755err_get_rxirq:
756err_too_small:
757err_get_base:
758 kfree(efm_port);
759 } else {
760 platform_set_drvdata(pdev, efm_port);
761 dev_dbg(&pdev->dev, "\\o/\n");
762 }
763
764 return ret;
765}
766
767static int __devexit efm32_uart_remove(struct platform_device *pdev)
768{
769 struct efm32_uart_port *efm_port = platform_get_drvdata(pdev);
770
771 platform_set_drvdata(pdev, NULL);
772
773 uart_remove_one_port(&efm32_uart_reg, &efm_port->port);
774
775 if (pdev->id >= 0 && pdev->id < ARRAY_SIZE(efm32_uart_ports))
776 efm32_uart_ports[pdev->id] = NULL;
777
778 kfree(efm_port);
779
780 return 0;
781}
782
783static struct of_device_id efm32_uart_dt_ids[] = {
784 {
785 .compatible = "efm32,uart",
786 }, {
787 /* sentinel */
788 }
789};
790MODULE_DEVICE_TABLE(of, efm32_uart_dt_ids);
791
792static struct platform_driver efm32_uart_driver = {
793 .probe = efm32_uart_probe,
794 .remove = __devexit_p(efm32_uart_remove),
795
796 .driver = {
797 .name = DRIVER_NAME,
798 .owner = THIS_MODULE,
799 .of_match_table = efm32_uart_dt_ids,
800 },
801};
802
803static int __init efm32_uart_init(void)
804{
805 int ret;
806
807 ret = uart_register_driver(&efm32_uart_reg);
808 if (ret)
809 return ret;
810
811 ret = platform_driver_register(&efm32_uart_driver);
812 if (ret)
813 uart_unregister_driver(&efm32_uart_reg);
814
815 pr_info("EFM32 UART/USART driver\n");
816
817 return ret;
818}
819module_init(efm32_uart_init);
820
821static void __exit efm32_uart_exit(void)
822{
823 platform_driver_unregister(&efm32_uart_driver);
824 uart_unregister_driver(&efm32_uart_reg);
825}
826
827MODULE_AUTHOR("Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>");
828MODULE_DESCRIPTION("EFM32 UART/USART driver");
829MODULE_LICENSE("GPL v2");
830MODULE_ALIAS("platform:" DRIVER_NAME);