Linux Audio

Check our new training course

Linux kernel drivers training

May 6-19, 2025
Register
Loading...
v3.1
  1/*
  2 * PCI Express Hot Plug Controller Driver
  3 *
  4 * Copyright (C) 1995,2001 Compaq Computer Corporation
  5 * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
  6 * Copyright (C) 2001 IBM Corp.
  7 * Copyright (C) 2003-2004 Intel Corporation
  8 *
  9 * All rights reserved.
 10 *
 11 * This program is free software; you can redistribute it and/or modify
 12 * it under the terms of the GNU General Public License as published by
 13 * the Free Software Foundation; either version 2 of the License, or (at
 14 * your option) any later version.
 15 *
 16 * This program is distributed in the hope that it will be useful, but
 17 * WITHOUT ANY WARRANTY; without even the implied warranty of
 18 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
 19 * NON INFRINGEMENT.  See the GNU General Public License for more
 20 * details.
 21 *
 22 * You should have received a copy of the GNU General Public License
 23 * along with this program; if not, write to the Free Software
 24 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 25 *
 26 * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
 27 *
 28 */
 29
 30#include <linux/module.h>
 31#include <linux/kernel.h>
 32#include <linux/types.h>
 33#include <linux/pci.h>
 34#include "../pci.h"
 35#include "pciehp.h"
 36
 37static int __ref pciehp_add_bridge(struct pci_dev *dev)
 38{
 39	struct pci_bus *parent = dev->bus;
 40	int pass, busnr, start = parent->secondary;
 41	int end = parent->subordinate;
 42
 43	for (busnr = start; busnr <= end; busnr++) {
 44		if (!pci_find_bus(pci_domain_nr(parent), busnr))
 45			break;
 46	}
 47	if (busnr-- > end) {
 48		err("No bus number available for hot-added bridge %s\n",
 49				pci_name(dev));
 50		return -1;
 51	}
 52	for (pass = 0; pass < 2; pass++)
 53		busnr = pci_scan_bridge(parent, dev, busnr, pass);
 54	if (!dev->subordinate)
 55		return -1;
 56
 57	return 0;
 58}
 59
 60int pciehp_configure_device(struct slot *p_slot)
 61{
 62	struct pci_dev *dev;
 63	struct pci_dev *bridge = p_slot->ctrl->pcie->port;
 64	struct pci_bus *parent = bridge->subordinate;
 65	int num, fn;
 66	struct controller *ctrl = p_slot->ctrl;
 67
 68	dev = pci_get_slot(parent, PCI_DEVFN(0, 0));
 69	if (dev) {
 70		ctrl_err(ctrl, "Device %s already exists "
 71			 "at %04x:%02x:00, cannot hot-add\n", pci_name(dev),
 72			 pci_domain_nr(parent), parent->number);
 73		pci_dev_put(dev);
 74		return -EINVAL;
 75	}
 76
 77	num = pci_scan_slot(parent, PCI_DEVFN(0, 0));
 78	if (num == 0) {
 79		ctrl_err(ctrl, "No new device found\n");
 80		return -ENODEV;
 81	}
 82
 83	for (fn = 0; fn < 8; fn++) {
 84		dev = pci_get_slot(parent, PCI_DEVFN(0, fn));
 85		if (!dev)
 86			continue;
 87		if ((dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) ||
 88				(dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)) {
 89			pciehp_add_bridge(dev);
 90		}
 91		pci_dev_put(dev);
 92	}
 93
 94	pci_assign_unassigned_bridge_resources(bridge);
 95
 96	for (fn = 0; fn < 8; fn++) {
 97		dev = pci_get_slot(parent, PCI_DEVFN(0, fn));
 98		if (!dev)
 99			continue;
100		if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
101			pci_dev_put(dev);
102			continue;
103		}
104		pci_configure_slot(dev);
105		pci_dev_put(dev);
106	}
107
108	pci_bus_add_devices(parent);
109
110	return 0;
111}
112
113int pciehp_unconfigure_device(struct slot *p_slot)
114{
115	int ret, rc = 0;
116	int j;
117	u8 bctl = 0;
118	u8 presence = 0;
119	struct pci_bus *parent = p_slot->ctrl->pcie->port->subordinate;
120	u16 command;
121	struct controller *ctrl = p_slot->ctrl;
122
123	ctrl_dbg(ctrl, "%s: domain:bus:dev = %04x:%02x:00\n",
124		 __func__, pci_domain_nr(parent), parent->number);
125	ret = pciehp_get_adapter_status(p_slot, &presence);
126	if (ret)
127		presence = 0;
128
129	for (j = 0; j < 8; j++) {
130		struct pci_dev *temp = pci_get_slot(parent, PCI_DEVFN(0, j));
131		if (!temp)
132			continue;
133		if (temp->hdr_type == PCI_HEADER_TYPE_BRIDGE && presence) {
134			pci_read_config_byte(temp, PCI_BRIDGE_CONTROL, &bctl);
135			if (bctl & PCI_BRIDGE_CTL_VGA) {
136				ctrl_err(ctrl,
137					 "Cannot remove display device %s\n",
138					 pci_name(temp));
139				pci_dev_put(temp);
140				rc = -EINVAL;
141				break;
142			}
143		}
144		pci_remove_bus_device(temp);
145		/*
146		 * Ensure that no new Requests will be generated from
147		 * the device.
148		 */
149		if (presence) {
150			pci_read_config_word(temp, PCI_COMMAND, &command);
151			command &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_SERR);
152			command |= PCI_COMMAND_INTX_DISABLE;
153			pci_write_config_word(temp, PCI_COMMAND, command);
154		}
155		pci_dev_put(temp);
156	}
157
158	return rc;
159}
v3.5.6
  1/*
  2 * PCI Express Hot Plug Controller Driver
  3 *
  4 * Copyright (C) 1995,2001 Compaq Computer Corporation
  5 * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
  6 * Copyright (C) 2001 IBM Corp.
  7 * Copyright (C) 2003-2004 Intel Corporation
  8 *
  9 * All rights reserved.
 10 *
 11 * This program is free software; you can redistribute it and/or modify
 12 * it under the terms of the GNU General Public License as published by
 13 * the Free Software Foundation; either version 2 of the License, or (at
 14 * your option) any later version.
 15 *
 16 * This program is distributed in the hope that it will be useful, but
 17 * WITHOUT ANY WARRANTY; without even the implied warranty of
 18 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
 19 * NON INFRINGEMENT.  See the GNU General Public License for more
 20 * details.
 21 *
 22 * You should have received a copy of the GNU General Public License
 23 * along with this program; if not, write to the Free Software
 24 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 25 *
 26 * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
 27 *
 28 */
 29
 30#include <linux/module.h>
 31#include <linux/kernel.h>
 32#include <linux/types.h>
 33#include <linux/pci.h>
 34#include "../pci.h"
 35#include "pciehp.h"
 36
 37static int __ref pciehp_add_bridge(struct pci_dev *dev)
 38{
 39	struct pci_bus *parent = dev->bus;
 40	int pass, busnr, start = parent->secondary;
 41	int end = parent->subordinate;
 42
 43	for (busnr = start; busnr <= end; busnr++) {
 44		if (!pci_find_bus(pci_domain_nr(parent), busnr))
 45			break;
 46	}
 47	if (busnr-- > end) {
 48		err("No bus number available for hot-added bridge %s\n",
 49				pci_name(dev));
 50		return -1;
 51	}
 52	for (pass = 0; pass < 2; pass++)
 53		busnr = pci_scan_bridge(parent, dev, busnr, pass);
 54	if (!dev->subordinate)
 55		return -1;
 56
 57	return 0;
 58}
 59
 60int pciehp_configure_device(struct slot *p_slot)
 61{
 62	struct pci_dev *dev;
 63	struct pci_dev *bridge = p_slot->ctrl->pcie->port;
 64	struct pci_bus *parent = bridge->subordinate;
 65	int num, fn;
 66	struct controller *ctrl = p_slot->ctrl;
 67
 68	dev = pci_get_slot(parent, PCI_DEVFN(0, 0));
 69	if (dev) {
 70		ctrl_err(ctrl, "Device %s already exists "
 71			 "at %04x:%02x:00, cannot hot-add\n", pci_name(dev),
 72			 pci_domain_nr(parent), parent->number);
 73		pci_dev_put(dev);
 74		return -EINVAL;
 75	}
 76
 77	num = pci_scan_slot(parent, PCI_DEVFN(0, 0));
 78	if (num == 0) {
 79		ctrl_err(ctrl, "No new device found\n");
 80		return -ENODEV;
 81	}
 82
 83	for (fn = 0; fn < 8; fn++) {
 84		dev = pci_get_slot(parent, PCI_DEVFN(0, fn));
 85		if (!dev)
 86			continue;
 87		if ((dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) ||
 88				(dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)) {
 89			pciehp_add_bridge(dev);
 90		}
 91		pci_dev_put(dev);
 92	}
 93
 94	pci_assign_unassigned_bridge_resources(bridge);
 95
 96	for (fn = 0; fn < 8; fn++) {
 97		dev = pci_get_slot(parent, PCI_DEVFN(0, fn));
 98		if (!dev)
 99			continue;
100		if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
101			pci_dev_put(dev);
102			continue;
103		}
104		pci_configure_slot(dev);
105		pci_dev_put(dev);
106	}
107
108	pci_bus_add_devices(parent);
109
110	return 0;
111}
112
113int pciehp_unconfigure_device(struct slot *p_slot)
114{
115	int ret, rc = 0;
116	int j;
117	u8 bctl = 0;
118	u8 presence = 0;
119	struct pci_bus *parent = p_slot->ctrl->pcie->port->subordinate;
120	u16 command;
121	struct controller *ctrl = p_slot->ctrl;
122
123	ctrl_dbg(ctrl, "%s: domain:bus:dev = %04x:%02x:00\n",
124		 __func__, pci_domain_nr(parent), parent->number);
125	ret = pciehp_get_adapter_status(p_slot, &presence);
126	if (ret)
127		presence = 0;
128
129	for (j = 0; j < 8; j++) {
130		struct pci_dev *temp = pci_get_slot(parent, PCI_DEVFN(0, j));
131		if (!temp)
132			continue;
133		if (temp->hdr_type == PCI_HEADER_TYPE_BRIDGE && presence) {
134			pci_read_config_byte(temp, PCI_BRIDGE_CONTROL, &bctl);
135			if (bctl & PCI_BRIDGE_CTL_VGA) {
136				ctrl_err(ctrl,
137					 "Cannot remove display device %s\n",
138					 pci_name(temp));
139				pci_dev_put(temp);
140				rc = -EINVAL;
141				break;
142			}
143		}
144		pci_stop_and_remove_bus_device(temp);
145		/*
146		 * Ensure that no new Requests will be generated from
147		 * the device.
148		 */
149		if (presence) {
150			pci_read_config_word(temp, PCI_COMMAND, &command);
151			command &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_SERR);
152			command |= PCI_COMMAND_INTX_DISABLE;
153			pci_write_config_word(temp, PCI_COMMAND, command);
154		}
155		pci_dev_put(temp);
156	}
157
158	return rc;
159}