Loading...
1menu "Bus options (PCI, PCMCIA, EISA, GSC, ISA)"
2
3config GSC
4 bool "VSC/GSC/HSC bus support"
5 default y
6 help
7 The VSC, GSC and HSC busses were used from the earliest 700-series
8 workstations up to and including the C360/J2240 workstations. They
9 were also used in servers from the E-class to the K-class. They
10 are not found in B1000, C3000, J5000, A500, L1000, N4000 and upwards.
11 If in doubt, say "Y".
12
13config HPPB
14 bool "HP-PB bus support"
15 depends on GSC
16 help
17 The HP-PB bus was used in the Nova class and K-class servers.
18 If in doubt, say "Y"
19
20config IOMMU_CCIO
21 bool "U2/Uturn I/O MMU"
22 depends on GSC
23 help
24 Say Y here to enable DMA management routines for the first
25 generation of PA-RISC cache-coherent machines. Programs the
26 U2/Uturn chip in "Virtual Mode" and use the I/O MMU.
27
28config GSC_LASI
29 bool "Lasi I/O support"
30 depends on GSC
31 help
32 Say Y here to support the Lasi multifunction chip found in
33 many PA-RISC workstations & servers. It includes interfaces
34 for a parallel port, serial port, NCR 53c710 SCSI, Apricot
35 Ethernet, Harmony audio, PS/2 keyboard & mouse, ISDN, telephony
36 and floppy. Note that you must still enable all the individual
37 drivers for these chips.
38
39config GSC_WAX
40 bool "Wax I/O support"
41 depends on GSC
42 help
43 Say Y here to support the Wax multifunction chip found in some
44 older systems, including B/C/D/R class and 715/64, 715/80 and
45 715/100. Wax includes an EISA adapter, a serial port (not always
46 used), a HIL interface chip and is also known to be used as the
47 GSC bridge for an X.25 GSC card.
48
49config EISA
50 bool "EISA support"
51 depends on GSC
52 help
53 Say Y here if you have an EISA bus in your machine. This code
54 supports both the Mongoose & Wax EISA adapters. It is sadly
55 incomplete and lacks support for card-to-host DMA.
56
57source "drivers/eisa/Kconfig"
58
59config ISA
60 bool "ISA support"
61 depends on EISA
62 help
63 If you want to plug an ISA card into your EISA bus, say Y here.
64 Most people should say N.
65
66config PCI
67 bool "PCI support"
68 help
69 All recent HP machines have PCI slots, and you should say Y here
70 if you have a recent machine. If you are convinced you do not have
71 PCI slots in your machine (eg a 712), then you may say "N" here.
72 Beware that some GSC cards have a Dino onboard and PCI inside them,
73 so it may be safest to say "Y" anyway.
74
75source "drivers/pci/Kconfig"
76
77config GSC_DINO
78 bool "GSCtoPCI/Dino PCI support"
79 depends on PCI && GSC
80 help
81 Say Y here to support the Dino & Cujo GSC to PCI bridges found in
82 machines from the B132 to the C360, the J2240 and the A180. Some
83 GSC/HSC cards (eg gigabit & dual 100 Mbit Ethernet) have a Dino on
84 the card, and you also need to say Y here if you have such a card.
85 Note that Dino also supplies one of the serial ports on certain
86 machines. If in doubt, say Y.
87
88config PCI_LBA
89 bool "LBA/Elroy PCI support"
90 depends on PCI
91 help
92 Say Y here to support the Elroy PCI Lower Bus Adapter. This is
93 present on B, C, J, L and N-class machines with 4-digit model
94 numbers and the A400/A500.
95
96config IOSAPIC
97 bool
98 depends on PCI_LBA
99 default PCI_LBA
100
101config IOMMU_SBA
102 bool
103 depends on PCI_LBA
104 default PCI_LBA
105
106config IOMMU_HELPER
107 bool
108 depends on IOMMU_SBA || IOMMU_CCIO
109 default y
110
111#config PCI_EPIC
112# bool "EPIC/SAGA PCI support"
113# depends on PCI
114# default y
115# help
116# Say Y here for V-class PCI, DMA/IOMMU, IRQ subsystem support.
117
118source "drivers/pcmcia/Kconfig"
119
120source "drivers/pci/hotplug/Kconfig"
121
122endmenu
123
124menu "PA-RISC specific drivers"
125
126config SUPERIO
127 bool "SuperIO (SuckyIO) support"
128 depends on PCI_LBA
129 default y
130 help
131 Say Y here to support the SuperIO chip found in Bxxxx, C3xxx and
132 J5xxx+ machines. This enables IDE, Floppy, Parallel Port, and
133 Serial port on those machines.
134
135config CHASSIS_LCD_LED
136 bool "Chassis LCD and LED support"
137 default y
138 help
139 Say Y here if you want to enable support for the Heartbeat,
140 Disk/Network activities LEDs on some PA-RISC machines,
141 or support for the LCD that can be found on recent material.
142
143 This has nothing to do with LED State support for A and E class.
144
145 If unsure, say Y.
146
147config PDC_CHASSIS
148 bool "PDC chassis state codes support"
149 default y
150 help
151 Say Y here if you want to enable support for Chassis codes.
152 That includes support for LED State front panel as found on E
153 class, and support for the GSP Virtual Front Panel (LED State and
154 message logging) as found on high end servers such as A, L and
155 N-class.
156 This driver will also display progress messages on LCD display,
157 such as "INI", "RUN" and "FLT", and might thus clobber messages
158 shown by the LED/LCD driver.
159 This driver updates the state panel (LED and/or LCD) upon system
160 state change (eg: boot, shutdown or panic).
161
162 If unsure, say Y.
163
164
165config PDC_CHASSIS_WARN
166 bool "PDC chassis warnings support"
167 depends on PROC_FS
168 default y
169 help
170 Say Y here if you want to enable support for Chassis warnings.
171 This will add a proc entry '/proc/chassis' giving some information
172 about the overall health state of the system.
173 This includes NVRAM battery level, overtemp or failures such as
174 fans or power units.
175
176 If unsure, say Y.
177
178
179config PDC_STABLE
180 tristate "PDC Stable Storage support"
181 depends on SYSFS
182 default y
183 help
184 Say Y here if you want to enable support for accessing Stable Storage
185 variables (PDC non volatile variables such as Primary Boot Path,
186 Console Path, Autoboot, Autosearch, etc) through SysFS.
187
188 If unsure, say Y.
189
190 To compile this driver as a module, choose M here.
191 The module will be called pdc_stable.
192
193endmenu
1menu "Bus options (PCI, PCMCIA, EISA, GSC, ISA)"
2
3config GSC
4 bool "VSC/GSC/HSC bus support"
5 default y
6 help
7 The VSC, GSC and HSC busses were used from the earliest 700-series
8 workstations up to and including the C360/J2240 workstations. They
9 were also used in servers from the E-class to the K-class. They
10 are not found in B1000, C3000, J5000, A500, L1000, N4000 and upwards.
11 If in doubt, say "Y".
12
13config HPPB
14 bool "HP-PB bus support"
15 depends on GSC
16 help
17 The HP-PB bus was used in the Nova class and K-class servers.
18 If in doubt, say "Y"
19
20config IOMMU_CCIO
21 bool "U2/Uturn I/O MMU"
22 depends on GSC
23 help
24 Say Y here to enable DMA management routines for the first
25 generation of PA-RISC cache-coherent machines. Programs the
26 U2/Uturn chip in "Virtual Mode" and use the I/O MMU.
27
28config GSC_LASI
29 bool "Lasi I/O support"
30 depends on GSC
31 help
32 Say Y here to support the Lasi multifunction chip found in
33 many PA-RISC workstations & servers. It includes interfaces
34 for a parallel port, serial port, NCR 53c710 SCSI, Apricot
35 Ethernet, Harmony audio, PS/2 keyboard & mouse, ISDN, telephony
36 and floppy. Note that you must still enable all the individual
37 drivers for these chips.
38
39config GSC_WAX
40 bool "Wax I/O support"
41 depends on GSC
42 help
43 Say Y here to support the Wax multifunction chip found in some
44 older systems, including B/C/D/R class and 715/64, 715/80 and
45 715/100. Wax includes an EISA adapter, a serial port (not always
46 used), a HIL interface chip and is also known to be used as the
47 GSC bridge for an X.25 GSC card.
48
49config EISA
50 bool "EISA support"
51 depends on GSC
52 help
53 Say Y here if you have an EISA bus in your machine. This code
54 supports both the Mongoose & Wax EISA adapters. It is sadly
55 incomplete and lacks support for card-to-host DMA.
56
57source "drivers/eisa/Kconfig"
58
59config ISA
60 bool "ISA support"
61 depends on EISA
62 help
63 If you want to plug an ISA card into your EISA bus, say Y here.
64 Most people should say N.
65
66config PCI
67 bool "PCI support"
68 help
69 All recent HP machines have PCI slots, and you should say Y here
70 if you have a recent machine. If you are convinced you do not have
71 PCI slots in your machine (eg a 712), then you may say "N" here.
72 Beware that some GSC cards have a Dino onboard and PCI inside them,
73 so it may be safest to say "Y" anyway.
74
75source "drivers/pci/Kconfig"
76
77config GSC_DINO
78 bool "GSCtoPCI/Dino PCI support"
79 depends on PCI && GSC
80 help
81 Say Y here to support the Dino & Cujo GSC to PCI bridges found in
82 machines from the B132 to the C360, the J2240 and the A180. Some
83 GSC/HSC cards (eg gigabit & dual 100 Mbit Ethernet) have a Dino on
84 the card, and you also need to say Y here if you have such a card.
85 Note that Dino also supplies one of the serial ports on certain
86 machines. If in doubt, say Y.
87
88config PCI_LBA
89 bool "LBA/Elroy PCI support"
90 depends on PCI
91 help
92 Say Y here to support the Elroy PCI Lower Bus Adapter. This is
93 present on B, C, J, L and N-class machines with 4-digit model
94 numbers and the A400/A500.
95
96config IOSAPIC
97 bool
98 depends on PCI_LBA
99 default PCI_LBA
100
101config IOMMU_SBA
102 bool
103 depends on PCI_LBA
104 default PCI_LBA
105
106config IOMMU_HELPER
107 bool
108 depends on IOMMU_SBA || IOMMU_CCIO
109 default y
110
111source "drivers/pcmcia/Kconfig"
112
113source "drivers/pci/hotplug/Kconfig"
114
115endmenu
116
117menu "PA-RISC specific drivers"
118
119config SUPERIO
120 bool "SuperIO (SuckyIO) support"
121 depends on PCI_LBA
122 default y
123 help
124 Say Y here to support the SuperIO chip found in Bxxxx, C3xxx and
125 J5xxx+ machines. This enables IDE, Floppy, Parallel Port, and
126 Serial port on those machines.
127
128config CHASSIS_LCD_LED
129 bool "Chassis LCD and LED support"
130 default y
131 help
132 Say Y here if you want to enable support for the Heartbeat,
133 Disk/Network activities LEDs on some PA-RISC machines,
134 or support for the LCD that can be found on recent material.
135
136 This has nothing to do with LED State support for A and E class.
137
138 If unsure, say Y.
139
140config PDC_CHASSIS
141 bool "PDC chassis state codes support"
142 default y
143 help
144 Say Y here if you want to enable support for Chassis codes.
145 That includes support for LED State front panel as found on E
146 class, and support for the GSP Virtual Front Panel (LED State and
147 message logging) as found on high end servers such as A, L and
148 N-class.
149 This driver will also display progress messages on LCD display,
150 such as "INI", "RUN" and "FLT", and might thus clobber messages
151 shown by the LED/LCD driver.
152 This driver updates the state panel (LED and/or LCD) upon system
153 state change (eg: boot, shutdown or panic).
154
155 If unsure, say Y.
156
157
158config PDC_CHASSIS_WARN
159 bool "PDC chassis warnings support"
160 depends on PROC_FS
161 default y
162 help
163 Say Y here if you want to enable support for Chassis warnings.
164 This will add a proc entry '/proc/chassis' giving some information
165 about the overall health state of the system.
166 This includes NVRAM battery level, overtemp or failures such as
167 fans or power units.
168
169 If unsure, say Y.
170
171
172config PDC_STABLE
173 tristate "PDC Stable Storage support"
174 depends on SYSFS
175 default y
176 help
177 Say Y here if you want to enable support for accessing Stable Storage
178 variables (PDC non volatile variables such as Primary Boot Path,
179 Console Path, Autoboot, Autosearch, etc) through SysFS.
180
181 If unsure, say Y.
182
183 To compile this driver as a module, choose M here.
184 The module will be called pdc_stable.
185
186endmenu