1/*
  2 * This file is part of wl1271
  3 *
  4 * Copyright (C) 2008-2010 Nokia Corporation
  5 *
  6 * Contact: Luciano Coelho <luciano.coelho@nokia.com>
  7 *
  8 * This program is free software; you can redistribute it and/or
  9 * modify it under the terms of the GNU General Public License
 10 * version 2 as published by the Free Software Foundation.
 11 *
 12 * This program is distributed in the hope that it will be useful, but
 13 * WITHOUT ANY WARRANTY; without even the implied warranty of
 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 15 * General Public License for more details.
 16 *
 17 * You should have received a copy of the GNU General Public License
 18 * along with this program; if not, write to the Free Software
 19 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
 20 * 02110-1301 USA
 21 *
 22 */
 23
 24#include <linux/module.h>
 25#include <linux/platform_device.h>
 26#include <linux/spi/spi.h>
 27
 28#include "wl12xx.h"
 29#include "wl12xx_80211.h"
 30#include "io.h"
 31#include "tx.h"
 32
 33#define OCP_CMD_LOOP  32
 34
 35#define OCP_CMD_WRITE 0x1
 36#define OCP_CMD_READ  0x2
 37
 38#define OCP_READY_MASK  BIT(18)
 39#define OCP_STATUS_MASK (BIT(16) | BIT(17))
 40
 41#define OCP_STATUS_NO_RESP    0x00000
 42#define OCP_STATUS_OK         0x10000
 43#define OCP_STATUS_REQ_FAILED 0x20000
 44#define OCP_STATUS_RESP_ERROR 0x30000
 45
 46bool wl1271_set_block_size(struct wl1271 *wl)
 47{
 48	if (wl->if_ops->set_block_size) {
 49		wl->if_ops->set_block_size(wl, WL12XX_BUS_BLOCK_SIZE);
 50		return true;
 51	}
 52
 53	return false;
 54}
 55
 56void wl1271_disable_interrupts(struct wl1271 *wl)
 57{
 58	wl->if_ops->disable_irq(wl);
 59}
 60
 61void wl1271_enable_interrupts(struct wl1271 *wl)
 62{
 63	wl->if_ops->enable_irq(wl);
 64}
 65
 66/* Set the SPI partitions to access the chip addresses
 67 *
 68 * To simplify driver code, a fixed (virtual) memory map is defined for
 69 * register and memory addresses. Because in the chipset, in different stages
 70 * of operation, those addresses will move around, an address translation
 71 * mechanism is required.
 72 *
 73 * There are four partitions (three memory and one register partition),
 74 * which are mapped to two different areas of the hardware memory.
 75 *
 76 *                                Virtual address
 77 *                                     space
 78 *
 79 *                                    |    |
 80 *                                 ...+----+--> mem.start
 81 *          Physical address    ...   |    |
 82 *               space       ...      |    | [PART_0]
 83 *                        ...         |    |
 84 *  00000000  <--+----+...         ...+----+--> mem.start + mem.size
 85 *               |    |         ...   |    |
 86 *               |MEM |      ...      |    |
 87 *               |    |   ...         |    |
 88 *  mem.size  <--+----+...            |    | {unused area)
 89 *               |    |   ...         |    |
 90 *               |REG |      ...      |    |
 91 *  mem.size     |    |         ...   |    |
 92 *      +     <--+----+...         ...+----+--> reg.start
 93 *  reg.size     |    |   ...         |    |
 94 *               |MEM2|      ...      |    | [PART_1]
 95 *               |    |         ...   |    |
 96 *                                 ...+----+--> reg.start + reg.size
 97 *                                    |    |
 98 *
 99 */
100int wl1271_set_partition(struct wl1271 *wl,
101			 struct wl1271_partition_set *p)
102{
103	/* copy partition info */
104	memcpy(&wl->part, p, sizeof(*p));
105
106	wl1271_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
107		     p->mem.start, p->mem.size);
108	wl1271_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
109		     p->reg.start, p->reg.size);
110	wl1271_debug(DEBUG_SPI, "mem2_start %08X mem2_size %08X",
111		     p->mem2.start, p->mem2.size);
112	wl1271_debug(DEBUG_SPI, "mem3_start %08X mem3_size %08X",
113		     p->mem3.start, p->mem3.size);
114
115	/* write partition info to the chipset */
116	wl1271_raw_write32(wl, HW_PART0_START_ADDR, p->mem.start);
117	wl1271_raw_write32(wl, HW_PART0_SIZE_ADDR, p->mem.size);
118	wl1271_raw_write32(wl, HW_PART1_START_ADDR, p->reg.start);
119	wl1271_raw_write32(wl, HW_PART1_SIZE_ADDR, p->reg.size);
120	wl1271_raw_write32(wl, HW_PART2_START_ADDR, p->mem2.start);
121	wl1271_raw_write32(wl, HW_PART2_SIZE_ADDR, p->mem2.size);
122	wl1271_raw_write32(wl, HW_PART3_START_ADDR, p->mem3.start);
123
124	return 0;
125}
126EXPORT_SYMBOL_GPL(wl1271_set_partition);
127
128void wl1271_io_reset(struct wl1271 *wl)
129{
130	if (wl->if_ops->reset)
131		wl->if_ops->reset(wl);
132}
133
134void wl1271_io_init(struct wl1271 *wl)
135{
136	if (wl->if_ops->init)
137		wl->if_ops->init(wl);
138}
139
140void wl1271_top_reg_write(struct wl1271 *wl, int addr, u16 val)
141{
142	/* write address >> 1 + 0x30000 to OCP_POR_CTR */
143	addr = (addr >> 1) + 0x30000;
144	wl1271_write32(wl, OCP_POR_CTR, addr);
145
146	/* write value to OCP_POR_WDATA */
147	wl1271_write32(wl, OCP_DATA_WRITE, val);
148
149	/* write 1 to OCP_CMD */
150	wl1271_write32(wl, OCP_CMD, OCP_CMD_WRITE);
151}
152
153u16 wl1271_top_reg_read(struct wl1271 *wl, int addr)
154{
155	u32 val;
156	int timeout = OCP_CMD_LOOP;
157
158	/* write address >> 1 + 0x30000 to OCP_POR_CTR */
159	addr = (addr >> 1) + 0x30000;
160	wl1271_write32(wl, OCP_POR_CTR, addr);
161
162	/* write 2 to OCP_CMD */
163	wl1271_write32(wl, OCP_CMD, OCP_CMD_READ);
164
165	/* poll for data ready */
166	do {
167		val = wl1271_read32(wl, OCP_DATA_READ);
168	} while (!(val & OCP_READY_MASK) && --timeout);
169
170	if (!timeout) {
171		wl1271_warning("Top register access timed out.");
172		return 0xffff;
173	}
174
175	/* check data status and return if OK */
176	if ((val & OCP_STATUS_MASK) == OCP_STATUS_OK)
177		return val & 0xffff;
178	else {
179		wl1271_warning("Top register access returned error.");
180		return 0xffff;
181	}
182}
183