Linux Audio

Check our new training course

Loading...
Note: File does not exist in v3.1.
  1/*******************************************************************************
  2
  3  Intel(R) 82576 Virtual Function Linux driver
  4  Copyright(c) 1999 - 2012 Intel Corporation.
  5
  6  This program is free software; you can redistribute it and/or modify it
  7  under the terms and conditions of the GNU General Public License,
  8  version 2, as published by the Free Software Foundation.
  9
 10  This program is distributed in the hope it will be useful, but WITHOUT
 11  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 12  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 13  more details.
 14
 15  You should have received a copy of the GNU General Public License along with
 16  this program; if not, write to the Free Software Foundation, Inc.,
 17  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
 18
 19  The full GNU General Public License is included in this distribution in
 20  the file called "COPYING".
 21
 22  Contact Information:
 23  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
 24  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 25
 26*******************************************************************************/
 27
 28#ifndef _E1000_DEFINES_H_
 29#define _E1000_DEFINES_H_
 30
 31/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
 32#define REQ_TX_DESCRIPTOR_MULTIPLE  8
 33#define REQ_RX_DESCRIPTOR_MULTIPLE  8
 34
 35/* IVAR valid bit */
 36#define E1000_IVAR_VALID        0x80
 37
 38/* Receive Descriptor bit definitions */
 39#define E1000_RXD_STAT_DD       0x01    /* Descriptor Done */
 40#define E1000_RXD_STAT_EOP      0x02    /* End of Packet */
 41#define E1000_RXD_STAT_IXSM     0x04    /* Ignore checksum */
 42#define E1000_RXD_STAT_VP       0x08    /* IEEE VLAN Packet */
 43#define E1000_RXD_STAT_UDPCS    0x10    /* UDP xsum calculated */
 44#define E1000_RXD_STAT_TCPCS    0x20    /* TCP xsum calculated */
 45#define E1000_RXD_STAT_IPCS     0x40    /* IP xsum calculated */
 46#define E1000_RXD_ERR_SE        0x02    /* Symbol Error */
 47#define E1000_RXD_SPC_VLAN_MASK 0x0FFF  /* VLAN ID is in lower 12 bits */
 48
 49#define E1000_RXDEXT_STATERR_CE    0x01000000
 50#define E1000_RXDEXT_STATERR_SE    0x02000000
 51#define E1000_RXDEXT_STATERR_SEQ   0x04000000
 52#define E1000_RXDEXT_STATERR_CXE   0x10000000
 53#define E1000_RXDEXT_STATERR_TCPE  0x20000000
 54#define E1000_RXDEXT_STATERR_IPE   0x40000000
 55#define E1000_RXDEXT_STATERR_RXE   0x80000000
 56
 57
 58/* Same mask, but for extended and packet split descriptors */
 59#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
 60    E1000_RXDEXT_STATERR_CE  |            \
 61    E1000_RXDEXT_STATERR_SE  |            \
 62    E1000_RXDEXT_STATERR_SEQ |            \
 63    E1000_RXDEXT_STATERR_CXE |            \
 64    E1000_RXDEXT_STATERR_RXE)
 65
 66/* Device Control */
 67#define E1000_CTRL_RST      0x04000000  /* Global reset */
 68
 69/* Device Status */
 70#define E1000_STATUS_FD         0x00000001      /* Full duplex.0=half,1=full */
 71#define E1000_STATUS_LU         0x00000002      /* Link up.0=no,1=link */
 72#define E1000_STATUS_TXOFF      0x00000010      /* transmission paused */
 73#define E1000_STATUS_SPEED_10   0x00000000      /* Speed 10Mb/s */
 74#define E1000_STATUS_SPEED_100  0x00000040      /* Speed 100Mb/s */
 75#define E1000_STATUS_SPEED_1000 0x00000080      /* Speed 1000Mb/s */
 76
 77#define SPEED_10    10
 78#define SPEED_100   100
 79#define SPEED_1000  1000
 80#define HALF_DUPLEX 1
 81#define FULL_DUPLEX 2
 82
 83/* Transmit Descriptor bit definitions */
 84#define E1000_TXD_POPTS_IXSM 0x01       /* Insert IP checksum */
 85#define E1000_TXD_POPTS_TXSM 0x02       /* Insert TCP/UDP checksum */
 86#define E1000_TXD_CMD_DEXT   0x20000000 /* Descriptor extension (0 = legacy) */
 87#define E1000_TXD_STAT_DD    0x00000001 /* Descriptor Done */
 88
 89#define MAX_JUMBO_FRAME_SIZE    0x3F00
 90
 91/* 802.1q VLAN Packet Size */
 92#define VLAN_TAG_SIZE              4    /* 802.3ac tag (not DMA'd) */
 93
 94/* Error Codes */
 95#define E1000_SUCCESS      0
 96#define E1000_ERR_CONFIG   3
 97#define E1000_ERR_MAC_INIT 5
 98#define E1000_ERR_MBX      15
 99
100/* SRRCTL bit definitions */
101#define E1000_SRRCTL_BSIZEPKT_SHIFT                     10 /* Shift _right_ */
102#define E1000_SRRCTL_BSIZEHDRSIZE_MASK                  0x00000F00
103#define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT                 2  /* Shift _left_ */
104#define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF                0x02000000
105#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS          0x0A000000
106#define E1000_SRRCTL_DESCTYPE_MASK                      0x0E000000
107#define E1000_SRRCTL_DROP_EN                            0x80000000
108
109#define E1000_SRRCTL_BSIZEPKT_MASK      0x0000007F
110#define E1000_SRRCTL_BSIZEHDR_MASK      0x00003F00
111
112/* Additional Descriptor Control definitions */
113#define E1000_TXDCTL_QUEUE_ENABLE  0x02000000 /* Enable specific Tx Queue */
114#define E1000_RXDCTL_QUEUE_ENABLE  0x02000000 /* Enable specific Rx Queue */
115
116/* Direct Cache Access (DCA) definitions */
117#define E1000_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */
118
119#define E1000_VF_INIT_TIMEOUT 200 /* Number of retries to clear RSTI */
120
121#endif /* _E1000_DEFINES_H_ */