1#
  2# Ethernet LAN device configuration
  3#
  4
  5menuconfig ETHERNET
  6	bool "Ethernet driver support"
  7	depends on NET
  8	default y
  9	---help---
 10	  This section contains all the Ethernet device drivers.
 11
 12if ETHERNET
 13
 14config MDIO
 15	tristate
 16
 17config SUNGEM_PHY
 18	tristate
 19
 20source "drivers/net/ethernet/3com/Kconfig"
 21source "drivers/net/ethernet/adaptec/Kconfig"
 22source "drivers/net/ethernet/aeroflex/Kconfig"
 23source "drivers/net/ethernet/alteon/Kconfig"
 24source "drivers/net/ethernet/amd/Kconfig"
 25source "drivers/net/ethernet/apple/Kconfig"
 26source "drivers/net/ethernet/atheros/Kconfig"
 27source "drivers/net/ethernet/cadence/Kconfig"
 28source "drivers/net/ethernet/adi/Kconfig"
 29source "drivers/net/ethernet/broadcom/Kconfig"
 30source "drivers/net/ethernet/brocade/Kconfig"
 31source "drivers/net/ethernet/calxeda/Kconfig"
 32source "drivers/net/ethernet/chelsio/Kconfig"
 33source "drivers/net/ethernet/cirrus/Kconfig"
 34source "drivers/net/ethernet/cisco/Kconfig"
 35source "drivers/net/ethernet/davicom/Kconfig"
 36
 37config DNET
 38	tristate "Dave ethernet support (DNET)"
 39	depends on HAS_IOMEM
 40	select PHYLIB
 41	---help---
 42	  The Dave ethernet interface (DNET) is found on Qong Board FPGA.
 43	  Say Y to include support for the DNET chip.
 44
 45	  To compile this driver as a module, choose M here: the module
 46	  will be called dnet.
 47
 48source "drivers/net/ethernet/dec/Kconfig"
 49source "drivers/net/ethernet/dlink/Kconfig"
 50source "drivers/net/ethernet/emulex/Kconfig"
 51source "drivers/net/ethernet/neterion/Kconfig"
 52source "drivers/net/ethernet/faraday/Kconfig"
 53source "drivers/net/ethernet/freescale/Kconfig"
 54source "drivers/net/ethernet/fujitsu/Kconfig"
 55source "drivers/net/ethernet/hp/Kconfig"
 56source "drivers/net/ethernet/ibm/Kconfig"
 57source "drivers/net/ethernet/intel/Kconfig"
 58source "drivers/net/ethernet/i825xx/Kconfig"
 59source "drivers/net/ethernet/xscale/Kconfig"
 60source "drivers/net/ethernet/icplus/Kconfig"
 61
 62config JME
 63	tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
 64	depends on PCI
 65	select CRC32
 66	select NET_CORE
 67	select MII
 68	---help---
 69	  This driver supports the PCI-Express gigabit ethernet adapters
 70	  based on JMicron JMC250 chipset.
 71
 72	  To compile this driver as a module, choose M here. The module
 73	  will be called jme.
 74
 75config KORINA
 76	tristate "Korina (IDT RC32434) Ethernet support"
 77	depends on MIKROTIK_RB532
 78	---help---
 79	  If you have a Mikrotik RouterBoard 500 or IDT RC32434
 80	  based system say Y. Otherwise say N.
 81
 82config LANTIQ_ETOP
 83	tristate "Lantiq SoC ETOP driver"
 84	depends on SOC_TYPE_XWAY
 85	---help---
 86	  Support for the MII0 inside the Lantiq SoC
 87
 88source "drivers/net/ethernet/marvell/Kconfig"
 89source "drivers/net/ethernet/mellanox/Kconfig"
 90source "drivers/net/ethernet/micrel/Kconfig"
 91source "drivers/net/ethernet/microchip/Kconfig"
 92
 93config MIPS_SIM_NET
 94	tristate "MIPS simulator Network device"
 95	depends on MIPS_SIM
 96	---help---
 97	  The MIPSNET device is a simple Ethernet network device which is
 98	  emulated by the MIPS Simulator.
 99	  If you are not using a MIPSsim or are unsure, say N.
100
101source "drivers/net/ethernet/myricom/Kconfig"
102
103config FEALNX
104	tristate "Myson MTD-8xx PCI Ethernet support"
105	depends on PCI
106	select CRC32
107	select NET_CORE
108	select MII
109	---help---
110	  Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
111	  cards. <http://www.myson.com.tw/>
112
113source "drivers/net/ethernet/natsemi/Kconfig"
114source "drivers/net/ethernet/8390/Kconfig"
115
116config NET_NETX
117	tristate "NetX Ethernet support"
118	select NET_CORE
119	select MII
120	depends on ARCH_NETX
121	---help---
122	  This is support for the Hilscher netX builtin Ethernet ports
123
124	  To compile this driver as a module, choose M here. The module
125	  will be called netx-eth.
126
127source "drivers/net/ethernet/nuvoton/Kconfig"
128source "drivers/net/ethernet/nvidia/Kconfig"
129source "drivers/net/ethernet/nxp/Kconfig"
130source "drivers/net/ethernet/octeon/Kconfig"
131source "drivers/net/ethernet/oki-semi/Kconfig"
132
133config ETHOC
134	tristate "OpenCores 10/100 Mbps Ethernet MAC support"
135	depends on HAS_IOMEM && HAS_DMA
136	select NET_CORE
137	select MII
138	select PHYLIB
139	select CRC32
140	select BITREVERSE
141	---help---
142	  Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC.
143
144source "drivers/net/ethernet/packetengines/Kconfig"
145source "drivers/net/ethernet/pasemi/Kconfig"
146source "drivers/net/ethernet/qlogic/Kconfig"
147source "drivers/net/ethernet/racal/Kconfig"
148source "drivers/net/ethernet/realtek/Kconfig"
149source "drivers/net/ethernet/renesas/Kconfig"
150source "drivers/net/ethernet/rdc/Kconfig"
151
152config S6GMAC
153	tristate "S6105 GMAC ethernet support"
154	depends on XTENSA_VARIANT_S6000
155	select PHYLIB
156	---help---
157	  This driver supports the on chip ethernet device on the
158	  S6105 xtensa processor.
159
160	  To compile this driver as a module, choose M here. The module
161	  will be called s6gmac.
162
163source "drivers/net/ethernet/seeq/Kconfig"
164source "drivers/net/ethernet/silan/Kconfig"
165source "drivers/net/ethernet/sis/Kconfig"
166source "drivers/net/ethernet/sfc/Kconfig"
167source "drivers/net/ethernet/sgi/Kconfig"
168source "drivers/net/ethernet/smsc/Kconfig"
169source "drivers/net/ethernet/stmicro/Kconfig"
170source "drivers/net/ethernet/sun/Kconfig"
171source "drivers/net/ethernet/tehuti/Kconfig"
172source "drivers/net/ethernet/ti/Kconfig"
173source "drivers/net/ethernet/tile/Kconfig"
174source "drivers/net/ethernet/toshiba/Kconfig"
175source "drivers/net/ethernet/tundra/Kconfig"
176source "drivers/net/ethernet/via/Kconfig"
177source "drivers/net/ethernet/wiznet/Kconfig"
178source "drivers/net/ethernet/xilinx/Kconfig"
179source "drivers/net/ethernet/xircom/Kconfig"
180
181endif # ETHERNET